/* Common target dependent code for GDB on ARM systems.
- Copyright (C) 1988-2015 Free Software Foundation, Inc.
+ Copyright (C) 1988-2016 Free Software Foundation, Inc.
This file is part of GDB.
#include "user-regs.h"
#include "observer.h"
+#include "arch/arm.h"
+#include "arch/arm-get-next-pcs.h"
#include "arm-tdep.h"
#include "gdb/sim-arm.h"
struct regcache *regcache,
int regnum, const gdb_byte *buf);
-static int thumb_insn_size (unsigned short inst1);
+/* get_next_pcs operations. */
+static struct arm_get_next_pcs_ops arm_get_next_pcs_ops = {
+ arm_get_next_pcs_read_memory_unsigned_integer,
+ arm_get_next_pcs_syscall_next_pc,
+ arm_get_next_pcs_addr_bits_remove,
+ arm_get_next_pcs_is_thumb
+};
struct arm_prologue_cache
{
#define DISPLACED_STEPPING_ARCH_VERSION 5
-/* Addresses for calling Thumb functions have the bit 0 set.
- Here are some macros to test, set, or clear bit 0 of addresses. */
-#define IS_THUMB_ADDR(addr) ((addr) & 1)
-#define MAKE_THUMB_ADDR(addr) ((addr) | 1)
-#define UNMAKE_THUMB_ADDR(addr) ((addr) & ~1)
-
/* Set to true if the 32-bit mode is in use. */
int arm_apcs_32 = 1;
return CPSR_T;
}
+/* Determine if the processor is currently executing in Thumb mode. */
+
+int
+arm_is_thumb (struct regcache *regcache)
+{
+ ULONGEST cpsr;
+ ULONGEST t_bit = arm_psr_thumb_bit (get_regcache_arch (regcache));
+
+ cpsr = regcache_raw_get_unsigned (regcache, ARM_PS_REGNUM);
+
+ return (cpsr & t_bit) != 0;
+}
+
/* Determine if FRAME is executing in Thumb mode. */
int
0 };
unsigned int idx;
- data = objfile_data (sec->objfile, arm_objfile_data_key);
+ data = (struct arm_per_objfile *) objfile_data (sec->objfile,
+ arm_objfile_data_key);
if (data != NULL)
{
map = data->section_maps[sec->the_bfd_section->index];
return 0;
}
-/* Support routines for instruction parsing. */
-#define submask(x) ((1L << ((x) + 1)) - 1)
-#define bit(obj,st) (((obj) >> (st)) & 1)
-#define bits(obj,st,fn) (((obj) >> (st)) & submask ((fn) - (st)))
-#define sbits(obj,st,fn) \
- ((long) (bits(obj,st,fn) | ((long) bit(obj,fn) * ~ submask (fn - st))))
-#define BranchDest(addr,instr) \
- ((CORE_ADDR) (((unsigned long) (addr)) + 8 + (sbits (instr, 0, 23) << 2)))
-
/* Extract the immediate from instruction movw/movt of encoding T. INSN1 is
the first 16-bit of instruction, and INSN2 is the second 16-bit of
instruction. */
return (0x80 | (imm & 0x7f)) << (32 - count);
}
-/* Return 1 if the 16-bit Thumb instruction INST might change
- control flow, 0 otherwise. */
-
-static int
-thumb_instruction_changes_pc (unsigned short inst)
-{
- if ((inst & 0xff00) == 0xbd00) /* pop {rlist, pc} */
- return 1;
-
- if ((inst & 0xf000) == 0xd000) /* conditional branch */
- return 1;
-
- if ((inst & 0xf800) == 0xe000) /* unconditional branch */
- return 1;
-
- if ((inst & 0xff00) == 0x4700) /* bx REG, blx REG */
- return 1;
-
- if ((inst & 0xff87) == 0x4687) /* mov pc, REG */
- return 1;
-
- if ((inst & 0xf500) == 0xb100) /* CBNZ or CBZ. */
- return 1;
-
- return 0;
-}
-
-/* Return 1 if the 32-bit Thumb instruction in INST1 and INST2
- might change control flow, 0 otherwise. */
-
-static int
-thumb2_instruction_changes_pc (unsigned short inst1, unsigned short inst2)
-{
- if ((inst1 & 0xf800) == 0xf000 && (inst2 & 0x8000) == 0x8000)
- {
- /* Branches and miscellaneous control instructions. */
-
- if ((inst2 & 0x1000) != 0 || (inst2 & 0xd001) == 0xc000)
- {
- /* B, BL, BLX. */
- return 1;
- }
- else if (inst1 == 0xf3de && (inst2 & 0xff00) == 0x3f00)
- {
- /* SUBS PC, LR, #imm8. */
- return 1;
- }
- else if ((inst2 & 0xd000) == 0x8000 && (inst1 & 0x0380) != 0x0380)
- {
- /* Conditional branch. */
- return 1;
- }
-
- return 0;
- }
-
- if ((inst1 & 0xfe50) == 0xe810)
- {
- /* Load multiple or RFE. */
-
- if (bit (inst1, 7) && !bit (inst1, 8))
- {
- /* LDMIA or POP */
- if (bit (inst2, 15))
- return 1;
- }
- else if (!bit (inst1, 7) && bit (inst1, 8))
- {
- /* LDMDB */
- if (bit (inst2, 15))
- return 1;
- }
- else if (bit (inst1, 7) && bit (inst1, 8))
- {
- /* RFEIA */
- return 1;
- }
- else if (!bit (inst1, 7) && !bit (inst1, 8))
- {
- /* RFEDB */
- return 1;
- }
-
- return 0;
- }
-
- if ((inst1 & 0xffef) == 0xea4f && (inst2 & 0xfff0) == 0x0f00)
- {
- /* MOV PC or MOVS PC. */
- return 1;
- }
-
- if ((inst1 & 0xff70) == 0xf850 && (inst2 & 0xf000) == 0xf000)
- {
- /* LDR PC. */
- if (bits (inst1, 0, 3) == 15)
- return 1;
- if (bit (inst1, 7))
- return 1;
- if (bit (inst2, 11))
- return 1;
- if ((inst2 & 0x0fc0) == 0x0000)
- return 1;
-
- return 0;
- }
-
- if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf000)
- {
- /* TBB. */
- return 1;
- }
-
- if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf010)
- {
- /* TBH. */
- return 1;
- }
-
- return 0;
-}
-
/* Return 1 if the 16-bit Thumb instruction INSN restores SP in
epilogue, 0 otherwise. */
thumb_analyze_prologue (gdbarch, prologue_start, prologue_end, cache);
}
-/* Return 1 if THIS_INSTR might change control flow, 0 otherwise. */
-
-static int
-arm_instruction_changes_pc (uint32_t this_instr)
-{
- if (bits (this_instr, 28, 31) == INST_NV)
- /* Unconditional instructions. */
- switch (bits (this_instr, 24, 27))
- {
- case 0xa:
- case 0xb:
- /* Branch with Link and change to Thumb. */
- return 1;
- case 0xc:
- case 0xd:
- case 0xe:
- /* Coprocessor register transfer. */
- if (bits (this_instr, 12, 15) == 15)
- error (_("Invalid update to pc in instruction"));
- return 0;
- default:
- return 0;
- }
- else
- switch (bits (this_instr, 25, 27))
- {
- case 0x0:
- if (bits (this_instr, 23, 24) == 2 && bit (this_instr, 20) == 0)
- {
- /* Multiplies and extra load/stores. */
- if (bit (this_instr, 4) == 1 && bit (this_instr, 7) == 1)
- /* Neither multiplies nor extension load/stores are allowed
- to modify PC. */
- return 0;
-
- /* Otherwise, miscellaneous instructions. */
-
- /* BX <reg>, BXJ <reg>, BLX <reg> */
- if (bits (this_instr, 4, 27) == 0x12fff1
- || bits (this_instr, 4, 27) == 0x12fff2
- || bits (this_instr, 4, 27) == 0x12fff3)
- return 1;
-
- /* Other miscellaneous instructions are unpredictable if they
- modify PC. */
- return 0;
- }
- /* Data processing instruction. Fall through. */
-
- case 0x1:
- if (bits (this_instr, 12, 15) == 15)
- return 1;
- else
- return 0;
-
- case 0x2:
- case 0x3:
- /* Media instructions and architecturally undefined instructions. */
- if (bits (this_instr, 25, 27) == 3 && bit (this_instr, 4) == 1)
- return 0;
-
- /* Stores. */
- if (bit (this_instr, 20) == 0)
- return 0;
-
- /* Loads. */
- if (bits (this_instr, 12, 15) == ARM_PC_REGNUM)
- return 1;
- else
- return 0;
-
- case 0x4:
- /* Load/store multiple. */
- if (bit (this_instr, 20) == 1 && bit (this_instr, 15) == 1)
- return 1;
- else
- return 0;
-
- case 0x5:
- /* Branch and branch with link. */
- return 1;
-
- case 0x6:
- case 0x7:
- /* Coprocessor transfers or SWIs can not affect PC. */
- return 0;
-
- default:
- internal_error (__FILE__, __LINE__, _("bad value in switch"));
- }
-}
-
/* Return 1 if the ARM instruction INSN restores SP in epilogue, 0
otherwise. */
if (*this_cache == NULL)
*this_cache = arm_make_prologue_cache (this_frame);
- cache = *this_cache;
+ cache = (struct arm_prologue_cache *) *this_cache;
/* This is meant to halt the backtrace at "_start". */
pc = get_frame_pc (this_frame);
if (*this_cache == NULL)
*this_cache = arm_make_prologue_cache (this_frame);
- cache = *this_cache;
+ cache = (struct arm_prologue_cache *) *this_cache;
/* Use function start address as part of the frame ID. If we cannot
identify the start address (due to missing symbol information),
if (*this_cache == NULL)
*this_cache = arm_make_prologue_cache (this_frame);
- cache = *this_cache;
+ cache = (struct arm_prologue_cache *) *this_cache;
/* If we are asked to unwind the PC, then we need to return the LR
instead. The prologue may save PC, but it will point into this
static void
arm_exidx_data_free (struct objfile *objfile, void *arg)
{
- struct arm_exidx_data *data = arg;
+ struct arm_exidx_data *data = (struct arm_exidx_data *) arg;
unsigned int i;
for (i = 0; i < objfile->obfd->section_count; i++)
cleanups = make_cleanup (null_cleanup, NULL);
/* Read contents of exception table and index. */
- exidx = bfd_get_section_by_name (objfile->obfd, ".ARM.exidx");
+ exidx = bfd_get_section_by_name (objfile->obfd, ELF_STRING_ARM_unwind);
if (exidx)
{
exidx_vma = bfd_section_vma (objfile->obfd, exidx);
exidx_size = bfd_get_section_size (exidx);
- exidx_data = xmalloc (exidx_size);
+ exidx_data = (gdb_byte *) xmalloc (exidx_size);
make_cleanup (xfree, exidx_data);
if (!bfd_get_section_contents (objfile->obfd, exidx,
{
extab_vma = bfd_section_vma (objfile->obfd, extab);
extab_size = bfd_get_section_size (extab);
- extab_data = xmalloc (extab_size);
+ extab_data = (gdb_byte *) xmalloc (extab_size);
make_cleanup (xfree, extab_data);
if (!bfd_get_section_contents (objfile->obfd, extab,
extab section starting at ADDR. */
if (n_bytes || n_words)
{
- gdb_byte *p = entry = obstack_alloc (&objfile->objfile_obstack,
- n_bytes + n_words * 4 + 1);
+ gdb_byte *p = entry
+ = (gdb_byte *) obstack_alloc (&objfile->objfile_obstack,
+ n_bytes + n_words * 4 + 1);
while (n_bytes--)
*p++ = (gdb_byte) ((word >> (8 * n_bytes)) & 0xff);
struct arm_exidx_entry map_key = { memaddr - obj_section_addr (sec), 0 };
unsigned int idx;
- data = objfile_data (sec->objfile, arm_exidx_data_key);
+ data = ((struct arm_exidx_data *)
+ objfile_data (sec->objfile, arm_exidx_data_key));
if (data != NULL)
{
map = data->section_maps[sec->the_bfd_section->index];
if (*this_cache == NULL)
*this_cache = arm_make_stub_cache (this_frame);
- cache = *this_cache;
+ cache = (struct arm_prologue_cache *) *this_cache;
*this_id = frame_id_build (cache->prev_sp, get_frame_pc (this_frame));
}
if (*this_cache == NULL)
*this_cache = arm_m_exception_cache (this_frame);
- cache = *this_cache;
+ cache = (struct arm_prologue_cache *) *this_cache;
/* Our frame ID for a stub frame is the current SP and LR. */
*this_id = frame_id_build (cache->prev_sp,
if (*this_cache == NULL)
*this_cache = arm_m_exception_cache (this_frame);
- cache = *this_cache;
+ cache = (struct arm_prologue_cache *) *this_cache;
/* The value was already reconstructed into PREV_SP. */
if (prev_regnum == ARM_SP_REGNUM)
if (*this_cache == NULL)
*this_cache = arm_make_prologue_cache (this_frame);
- cache = *this_cache;
+ cache = (struct arm_prologue_cache *) *this_cache;
return cache->prev_sp - cache->framesize;
}
{
int len;
struct stack_item *prev;
- void *data;
+ gdb_byte *data;
};
static struct stack_item *
-push_stack_item (struct stack_item *prev, const void *contents, int len)
+push_stack_item (struct stack_item *prev, const gdb_byte *contents, int len)
{
struct stack_item *si;
- si = xmalloc (sizeof (struct stack_item));
- si->data = xmalloc (len);
+ si = XNEW (struct stack_item);
+ si->data = (gdb_byte *) xmalloc (len);
si->len = len;
si->prev = prev;
memcpy (si->data, contents, len);
return TYPE_LENGTH (t);
case TYPE_CODE_ARRAY:
+ if (TYPE_VECTOR (t))
+ {
+ /* Use the natural alignment for vector types (the same for
+ scalar type), but the maximum alignment is 64-bit. */
+ if (TYPE_LENGTH (t) > 8)
+ return 8;
+ else
+ return TYPE_LENGTH (t);
+ }
+ else
+ return arm_type_align (TYPE_TARGET_TYPE (t));
case TYPE_CODE_COMPLEX:
- /* TODO: What about vector types? */
return arm_type_align (TYPE_TARGET_TYPE (t));
case TYPE_CODE_STRUCT:
case TYPE_CODE_ARRAY:
{
- int count;
- unsigned unitlen;
- count = arm_vfp_cprc_sub_candidate (TYPE_TARGET_TYPE (t), base_type);
- if (count == -1)
- return -1;
- if (TYPE_LENGTH (t) == 0)
+ if (TYPE_VECTOR (t))
{
- gdb_assert (count == 0);
- return 0;
+ /* A 64-bit or 128-bit containerized vector type are VFP
+ CPRCs. */
+ switch (TYPE_LENGTH (t))
+ {
+ case 8:
+ if (*base_type == VFP_CPRC_UNKNOWN)
+ *base_type = VFP_CPRC_VEC64;
+ return 1;
+ case 16:
+ if (*base_type == VFP_CPRC_UNKNOWN)
+ *base_type = VFP_CPRC_VEC128;
+ return 1;
+ default:
+ return -1;
+ }
+ }
+ else
+ {
+ int count;
+ unsigned unitlen;
+
+ count = arm_vfp_cprc_sub_candidate (TYPE_TARGET_TYPE (t),
+ base_type);
+ if (count == -1)
+ return -1;
+ if (TYPE_LENGTH (t) == 0)
+ {
+ gdb_assert (count == 0);
+ return 0;
+ }
+ else if (count == 0)
+ return -1;
+ unitlen = arm_vfp_cprc_unit_length (*base_type);
+ gdb_assert ((TYPE_LENGTH (t) % unitlen) == 0);
+ return TYPE_LENGTH (t) / unitlen;
}
- else if (count == 0)
- return -1;
- unitlen = arm_vfp_cprc_unit_length (*base_type);
- gdb_assert ((TYPE_LENGTH (t) % unitlen) == 0);
- return TYPE_LENGTH (t) / unitlen;
}
break;
CORE_ADDR regval = extract_unsigned_integer (val, len, byte_order);
if (arm_pc_is_thumb (gdbarch, regval))
{
- bfd_byte *copy = alloca (len);
+ bfd_byte *copy = (bfd_byte *) alloca (len);
store_unsigned_integer (copy, len, byte_order,
MAKE_THUMB_ADDR (regval));
val = copy;
while (len > 0)
{
int partial_len = len < INT_REGISTER_SIZE ? len : INT_REGISTER_SIZE;
+ CORE_ADDR regval
+ = extract_unsigned_integer (val, partial_len, byte_order);
if (may_use_core_reg && argreg <= ARM_LAST_ARG_REGNUM)
{
/* The argument is being passed in a general purpose
register. */
- CORE_ADDR regval
- = extract_unsigned_integer (val, partial_len, byte_order);
if (byte_order == BFD_ENDIAN_BIG)
regval <<= (INT_REGISTER_SIZE - partial_len) * 8;
if (arm_debug)
}
else
{
+ gdb_byte buf[INT_REGISTER_SIZE];
+
+ memset (buf, 0, sizeof (buf));
+ store_unsigned_integer (buf, partial_len, byte_order, regval);
+
/* Push the arguments onto the stack. */
if (arm_debug)
fprintf_unfiltered (gdb_stdlog, "arg %d @ sp + %d\n",
argnum, nstack);
- si = push_stack_item (si, val, INT_REGISTER_SIZE);
+ si = push_stack_item (si, buf, INT_REGISTER_SIZE);
nstack += INT_REGISTER_SIZE;
}
return t;
}
- if (regnum >= ARM_F0_REGNUM && regnum < ARM_F0_REGNUM + NUM_FREGS)
- {
- if (!gdbarch_tdep (gdbarch)->have_fpa_registers)
- return builtin_type (gdbarch)->builtin_void;
-
- return arm_ext_type (gdbarch);
- }
- else if (regnum == ARM_SP_REGNUM)
- return builtin_type (gdbarch)->builtin_data_ptr;
- else if (regnum == ARM_PC_REGNUM)
- return builtin_type (gdbarch)->builtin_func_ptr;
- else if (regnum >= ARRAY_SIZE (arm_register_names))
- /* These registers are only supported on targets which supply
- an XML description. */
- return builtin_type (gdbarch)->builtin_int0;
- else
- return builtin_type (gdbarch)->builtin_uint32;
-}
-
-/* Map a DWARF register REGNUM onto the appropriate GDB register
- number. */
-
-static int
-arm_dwarf_reg_to_regnum (struct gdbarch *gdbarch, int reg)
-{
- /* Core integer regs. */
- if (reg >= 0 && reg <= 15)
- return reg;
-
- /* Legacy FPA encoding. These were once used in a way which
- overlapped with VFP register numbering, so their use is
- discouraged, but GDB doesn't support the ARM toolchain
- which used them for VFP. */
- if (reg >= 16 && reg <= 23)
- return ARM_F0_REGNUM + reg - 16;
-
- /* New assignments for the FPA registers. */
- if (reg >= 96 && reg <= 103)
- return ARM_F0_REGNUM + reg - 96;
-
- /* WMMX register assignments. */
- if (reg >= 104 && reg <= 111)
- return ARM_WCGR0_REGNUM + reg - 104;
-
- if (reg >= 112 && reg <= 127)
- return ARM_WR0_REGNUM + reg - 112;
-
- if (reg >= 192 && reg <= 199)
- return ARM_WC0_REGNUM + reg - 192;
-
- /* VFP v2 registers. A double precision value is actually
- in d1 rather than s2, but the ABI only defines numbering
- for the single precision registers. This will "just work"
- in GDB for little endian targets (we'll read eight bytes,
- starting in s0 and then progressing to s1), but will be
- reversed on big endian targets with VFP. This won't
- be a problem for the new Neon quad registers; you're supposed
- to use DW_OP_piece for those. */
- if (reg >= 64 && reg <= 95)
- {
- char name_buf[4];
-
- xsnprintf (name_buf, sizeof (name_buf), "s%d", reg - 64);
- return user_reg_map_name_to_regnum (gdbarch, name_buf,
- strlen (name_buf));
- }
-
- /* VFP v3 / Neon registers. This range is also used for VFP v2
- registers, except that it now describes d0 instead of s0. */
- if (reg >= 256 && reg <= 287)
- {
- char name_buf[4];
-
- xsnprintf (name_buf, sizeof (name_buf), "d%d", reg - 256);
- return user_reg_map_name_to_regnum (gdbarch, name_buf,
- strlen (name_buf));
- }
-
- return -1;
-}
-
-/* Map GDB internal REGNUM onto the Arm simulator register numbers. */
-static int
-arm_register_sim_regno (struct gdbarch *gdbarch, int regnum)
-{
- int reg = regnum;
- gdb_assert (reg >= 0 && reg < gdbarch_num_regs (gdbarch));
-
- if (regnum >= ARM_WR0_REGNUM && regnum <= ARM_WR15_REGNUM)
- return regnum - ARM_WR0_REGNUM + SIM_ARM_IWMMXT_COP0R0_REGNUM;
-
- if (regnum >= ARM_WC0_REGNUM && regnum <= ARM_WC7_REGNUM)
- return regnum - ARM_WC0_REGNUM + SIM_ARM_IWMMXT_COP1R0_REGNUM;
-
- if (regnum >= ARM_WCGR0_REGNUM && regnum <= ARM_WCGR7_REGNUM)
- return regnum - ARM_WCGR0_REGNUM + SIM_ARM_IWMMXT_COP1R8_REGNUM;
-
- if (reg < NUM_GREGS)
- return SIM_ARM_R0_REGNUM + reg;
- reg -= NUM_GREGS;
-
- if (reg < NUM_FREGS)
- return SIM_ARM_FP0_REGNUM + reg;
- reg -= NUM_FREGS;
-
- if (reg < NUM_SREGS)
- return SIM_ARM_FPS_REGNUM + reg;
- reg -= NUM_SREGS;
-
- internal_error (__FILE__, __LINE__, _("Bad REGNUM %d"), regnum);
-}
-
-/* NOTE: cagney/2001-08-20: Both convert_from_extended() and
- convert_to_extended() use floatformat_arm_ext_littlebyte_bigword.
- It is thought that this is is the floating-point register format on
- little-endian systems. */
-
-static void
-convert_from_extended (const struct floatformat *fmt, const void *ptr,
- void *dbl, int endianess)
-{
- DOUBLEST d;
-
- if (endianess == BFD_ENDIAN_BIG)
- floatformat_to_doublest (&floatformat_arm_ext_big, ptr, &d);
- else
- floatformat_to_doublest (&floatformat_arm_ext_littlebyte_bigword,
- ptr, &d);
- floatformat_from_doublest (fmt, &d, dbl);
-}
-
-static void
-convert_to_extended (const struct floatformat *fmt, void *dbl, const void *ptr,
- int endianess)
-{
- DOUBLEST d;
-
- floatformat_to_doublest (fmt, ptr, &d);
- if (endianess == BFD_ENDIAN_BIG)
- floatformat_from_doublest (&floatformat_arm_ext_big, &d, dbl);
- else
- floatformat_from_doublest (&floatformat_arm_ext_littlebyte_bigword,
- &d, dbl);
-}
-
-static int
-condition_true (unsigned long cond, unsigned long status_reg)
-{
- if (cond == INST_AL || cond == INST_NV)
- return 1;
-
- switch (cond)
- {
- case INST_EQ:
- return ((status_reg & FLAG_Z) != 0);
- case INST_NE:
- return ((status_reg & FLAG_Z) == 0);
- case INST_CS:
- return ((status_reg & FLAG_C) != 0);
- case INST_CC:
- return ((status_reg & FLAG_C) == 0);
- case INST_MI:
- return ((status_reg & FLAG_N) != 0);
- case INST_PL:
- return ((status_reg & FLAG_N) == 0);
- case INST_VS:
- return ((status_reg & FLAG_V) != 0);
- case INST_VC:
- return ((status_reg & FLAG_V) == 0);
- case INST_HI:
- return ((status_reg & (FLAG_C | FLAG_Z)) == FLAG_C);
- case INST_LS:
- return ((status_reg & (FLAG_C | FLAG_Z)) != FLAG_C);
- case INST_GE:
- return (((status_reg & FLAG_N) == 0) == ((status_reg & FLAG_V) == 0));
- case INST_LT:
- return (((status_reg & FLAG_N) == 0) != ((status_reg & FLAG_V) == 0));
- case INST_GT:
- return (((status_reg & FLAG_Z) == 0)
- && (((status_reg & FLAG_N) == 0)
- == ((status_reg & FLAG_V) == 0)));
- case INST_LE:
- return (((status_reg & FLAG_Z) != 0)
- || (((status_reg & FLAG_N) == 0)
- != ((status_reg & FLAG_V) == 0)));
- }
- return 1;
-}
-
-static unsigned long
-shifted_reg_val (struct frame_info *frame, unsigned long inst, int carry,
- unsigned long pc_val, unsigned long status_reg)
-{
- unsigned long res, shift;
- int rm = bits (inst, 0, 3);
- unsigned long shifttype = bits (inst, 5, 6);
-
- if (bit (inst, 4))
- {
- int rs = bits (inst, 8, 11);
- shift = (rs == 15 ? pc_val + 8
- : get_frame_register_unsigned (frame, rs)) & 0xFF;
- }
- else
- shift = bits (inst, 7, 11);
-
- res = (rm == ARM_PC_REGNUM
- ? (pc_val + (bit (inst, 4) ? 12 : 8))
- : get_frame_register_unsigned (frame, rm));
-
- switch (shifttype)
- {
- case 0: /* LSL */
- res = shift >= 32 ? 0 : res << shift;
- break;
-
- case 1: /* LSR */
- res = shift >= 32 ? 0 : res >> shift;
- break;
-
- case 2: /* ASR */
- if (shift >= 32)
- shift = 31;
- res = ((res & 0x80000000L)
- ? ~((~res) >> shift) : res >> shift);
- break;
-
- case 3: /* ROR/RRX */
- shift &= 31;
- if (shift == 0)
- res = (res >> 1) | (carry ? 0x80000000L : 0);
- else
- res = (res >> shift) | (res << (32 - shift));
- break;
- }
-
- return res & 0xffffffff;
-}
-
-/* Return number of 1-bits in VAL. */
-
-static int
-bitcount (unsigned long val)
-{
- int nbits;
- for (nbits = 0; val != 0; nbits++)
- val &= val - 1; /* Delete rightmost 1-bit in val. */
- return nbits;
-}
-
-/* Return the size in bytes of the complete Thumb instruction whose
- first halfword is INST1. */
-
-static int
-thumb_insn_size (unsigned short inst1)
-{
- if ((inst1 & 0xe000) == 0xe000 && (inst1 & 0x1800) != 0)
- return 4;
- else
- return 2;
-}
-
-static int
-thumb_advance_itstate (unsigned int itstate)
-{
- /* Preserve IT[7:5], the first three bits of the condition. Shift
- the upcoming condition flags left by one bit. */
- itstate = (itstate & 0xe0) | ((itstate << 1) & 0x1f);
-
- /* If we have finished the IT block, clear the state. */
- if ((itstate & 0x0f) == 0)
- itstate = 0;
-
- return itstate;
-}
-
-/* Find the next PC after the current instruction executes. In some
- cases we can not statically determine the answer (see the IT state
- handling in this function); in that case, a breakpoint may be
- inserted in addition to the returned PC, which will be used to set
- another breakpoint by our caller. */
-
-static CORE_ADDR
-thumb_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
-{
- struct gdbarch *gdbarch = get_frame_arch (frame);
- struct address_space *aspace = get_frame_address_space (frame);
- enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
- enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
- unsigned long pc_val = ((unsigned long) pc) + 4; /* PC after prefetch */
- unsigned short inst1;
- CORE_ADDR nextpc = pc + 2; /* Default is next instruction. */
- unsigned long offset;
- ULONGEST status, itstate;
-
- nextpc = MAKE_THUMB_ADDR (nextpc);
- pc_val = MAKE_THUMB_ADDR (pc_val);
-
- inst1 = read_memory_unsigned_integer (pc, 2, byte_order_for_code);
-
- /* Thumb-2 conditional execution support. There are eight bits in
- the CPSR which describe conditional execution state. Once
- reconstructed (they're in a funny order), the low five bits
- describe the low bit of the condition for each instruction and
- how many instructions remain. The high three bits describe the
- base condition. One of the low four bits will be set if an IT
- block is active. These bits read as zero on earlier
- processors. */
- status = get_frame_register_unsigned (frame, ARM_PS_REGNUM);
- itstate = ((status >> 8) & 0xfc) | ((status >> 25) & 0x3);
-
- /* If-Then handling. On GNU/Linux, where this routine is used, we
- use an undefined instruction as a breakpoint. Unlike BKPT, IT
- can disable execution of the undefined instruction. So we might
- miss the breakpoint if we set it on a skipped conditional
- instruction. Because conditional instructions can change the
- flags, affecting the execution of further instructions, we may
- need to set two breakpoints. */
-
- if (gdbarch_tdep (gdbarch)->thumb2_breakpoint != NULL)
- {
- if ((inst1 & 0xff00) == 0xbf00 && (inst1 & 0x000f) != 0)
- {
- /* An IT instruction. Because this instruction does not
- modify the flags, we can accurately predict the next
- executed instruction. */
- itstate = inst1 & 0x00ff;
- pc += thumb_insn_size (inst1);
-
- while (itstate != 0 && ! condition_true (itstate >> 4, status))
- {
- inst1 = read_memory_unsigned_integer (pc, 2,
- byte_order_for_code);
- pc += thumb_insn_size (inst1);
- itstate = thumb_advance_itstate (itstate);
- }
-
- return MAKE_THUMB_ADDR (pc);
- }
- else if (itstate != 0)
- {
- /* We are in a conditional block. Check the condition. */
- if (! condition_true (itstate >> 4, status))
- {
- /* Advance to the next executed instruction. */
- pc += thumb_insn_size (inst1);
- itstate = thumb_advance_itstate (itstate);
-
- while (itstate != 0 && ! condition_true (itstate >> 4, status))
- {
- inst1 = read_memory_unsigned_integer (pc, 2,
- byte_order_for_code);
- pc += thumb_insn_size (inst1);
- itstate = thumb_advance_itstate (itstate);
- }
-
- return MAKE_THUMB_ADDR (pc);
- }
- else if ((itstate & 0x0f) == 0x08)
- {
- /* This is the last instruction of the conditional
- block, and it is executed. We can handle it normally
- because the following instruction is not conditional,
- and we must handle it normally because it is
- permitted to branch. Fall through. */
- }
- else
- {
- int cond_negated;
-
- /* There are conditional instructions after this one.
- If this instruction modifies the flags, then we can
- not predict what the next executed instruction will
- be. Fortunately, this instruction is architecturally
- forbidden to branch; we know it will fall through.
- Start by skipping past it. */
- pc += thumb_insn_size (inst1);
- itstate = thumb_advance_itstate (itstate);
-
- /* Set a breakpoint on the following instruction. */
- gdb_assert ((itstate & 0x0f) != 0);
- arm_insert_single_step_breakpoint (gdbarch, aspace,
- MAKE_THUMB_ADDR (pc));
- cond_negated = (itstate >> 4) & 1;
-
- /* Skip all following instructions with the same
- condition. If there is a later instruction in the IT
- block with the opposite condition, set the other
- breakpoint there. If not, then set a breakpoint on
- the instruction after the IT block. */
- do
- {
- inst1 = read_memory_unsigned_integer (pc, 2,
- byte_order_for_code);
- pc += thumb_insn_size (inst1);
- itstate = thumb_advance_itstate (itstate);
- }
- while (itstate != 0 && ((itstate >> 4) & 1) == cond_negated);
-
- return MAKE_THUMB_ADDR (pc);
- }
- }
- }
- else if (itstate & 0x0f)
- {
- /* We are in a conditional block. Check the condition. */
- int cond = itstate >> 4;
-
- if (! condition_true (cond, status))
- /* Advance to the next instruction. All the 32-bit
- instructions share a common prefix. */
- return MAKE_THUMB_ADDR (pc + thumb_insn_size (inst1));
-
- /* Otherwise, handle the instruction normally. */
- }
-
- if ((inst1 & 0xff00) == 0xbd00) /* pop {rlist, pc} */
- {
- CORE_ADDR sp;
-
- /* Fetch the saved PC from the stack. It's stored above
- all of the other registers. */
- offset = bitcount (bits (inst1, 0, 7)) * INT_REGISTER_SIZE;
- sp = get_frame_register_unsigned (frame, ARM_SP_REGNUM);
- nextpc = read_memory_unsigned_integer (sp + offset, 4, byte_order);
- }
- else if ((inst1 & 0xf000) == 0xd000) /* conditional branch */
- {
- unsigned long cond = bits (inst1, 8, 11);
- if (cond == 0x0f) /* 0x0f = SWI */
- {
- struct gdbarch_tdep *tdep;
- tdep = gdbarch_tdep (gdbarch);
-
- if (tdep->syscall_next_pc != NULL)
- nextpc = tdep->syscall_next_pc (frame);
-
- }
- else if (cond != 0x0f && condition_true (cond, status))
- nextpc = pc_val + (sbits (inst1, 0, 7) << 1);
- }
- else if ((inst1 & 0xf800) == 0xe000) /* unconditional branch */
- {
- nextpc = pc_val + (sbits (inst1, 0, 10) << 1);
- }
- else if (thumb_insn_size (inst1) == 4) /* 32-bit instruction */
- {
- unsigned short inst2;
- inst2 = read_memory_unsigned_integer (pc + 2, 2, byte_order_for_code);
-
- /* Default to the next instruction. */
- nextpc = pc + 4;
- nextpc = MAKE_THUMB_ADDR (nextpc);
-
- if ((inst1 & 0xf800) == 0xf000 && (inst2 & 0x8000) == 0x8000)
- {
- /* Branches and miscellaneous control instructions. */
-
- if ((inst2 & 0x1000) != 0 || (inst2 & 0xd001) == 0xc000)
- {
- /* B, BL, BLX. */
- int j1, j2, imm1, imm2;
-
- imm1 = sbits (inst1, 0, 10);
- imm2 = bits (inst2, 0, 10);
- j1 = bit (inst2, 13);
- j2 = bit (inst2, 11);
-
- offset = ((imm1 << 12) + (imm2 << 1));
- offset ^= ((!j2) << 22) | ((!j1) << 23);
-
- nextpc = pc_val + offset;
- /* For BLX make sure to clear the low bits. */
- if (bit (inst2, 12) == 0)
- nextpc = nextpc & 0xfffffffc;
- }
- else if (inst1 == 0xf3de && (inst2 & 0xff00) == 0x3f00)
- {
- /* SUBS PC, LR, #imm8. */
- nextpc = get_frame_register_unsigned (frame, ARM_LR_REGNUM);
- nextpc -= inst2 & 0x00ff;
- }
- else if ((inst2 & 0xd000) == 0x8000 && (inst1 & 0x0380) != 0x0380)
- {
- /* Conditional branch. */
- if (condition_true (bits (inst1, 6, 9), status))
- {
- int sign, j1, j2, imm1, imm2;
-
- sign = sbits (inst1, 10, 10);
- imm1 = bits (inst1, 0, 5);
- imm2 = bits (inst2, 0, 10);
- j1 = bit (inst2, 13);
- j2 = bit (inst2, 11);
-
- offset = (sign << 20) + (j2 << 19) + (j1 << 18);
- offset += (imm1 << 12) + (imm2 << 1);
-
- nextpc = pc_val + offset;
- }
- }
- }
- else if ((inst1 & 0xfe50) == 0xe810)
- {
- /* Load multiple or RFE. */
- int rn, offset, load_pc = 1;
-
- rn = bits (inst1, 0, 3);
- if (bit (inst1, 7) && !bit (inst1, 8))
- {
- /* LDMIA or POP */
- if (!bit (inst2, 15))
- load_pc = 0;
- offset = bitcount (inst2) * 4 - 4;
- }
- else if (!bit (inst1, 7) && bit (inst1, 8))
- {
- /* LDMDB */
- if (!bit (inst2, 15))
- load_pc = 0;
- offset = -4;
- }
- else if (bit (inst1, 7) && bit (inst1, 8))
- {
- /* RFEIA */
- offset = 0;
- }
- else if (!bit (inst1, 7) && !bit (inst1, 8))
- {
- /* RFEDB */
- offset = -8;
- }
- else
- load_pc = 0;
-
- if (load_pc)
- {
- CORE_ADDR addr = get_frame_register_unsigned (frame, rn);
- nextpc = get_frame_memory_unsigned (frame, addr + offset, 4);
- }
- }
- else if ((inst1 & 0xffef) == 0xea4f && (inst2 & 0xfff0) == 0x0f00)
- {
- /* MOV PC or MOVS PC. */
- nextpc = get_frame_register_unsigned (frame, bits (inst2, 0, 3));
- nextpc = MAKE_THUMB_ADDR (nextpc);
- }
- else if ((inst1 & 0xff70) == 0xf850 && (inst2 & 0xf000) == 0xf000)
- {
- /* LDR PC. */
- CORE_ADDR base;
- int rn, load_pc = 1;
-
- rn = bits (inst1, 0, 3);
- base = get_frame_register_unsigned (frame, rn);
- if (rn == ARM_PC_REGNUM)
- {
- base = (base + 4) & ~(CORE_ADDR) 0x3;
- if (bit (inst1, 7))
- base += bits (inst2, 0, 11);
- else
- base -= bits (inst2, 0, 11);
- }
- else if (bit (inst1, 7))
- base += bits (inst2, 0, 11);
- else if (bit (inst2, 11))
- {
- if (bit (inst2, 10))
- {
- if (bit (inst2, 9))
- base += bits (inst2, 0, 7);
- else
- base -= bits (inst2, 0, 7);
- }
- }
- else if ((inst2 & 0x0fc0) == 0x0000)
- {
- int shift = bits (inst2, 4, 5), rm = bits (inst2, 0, 3);
- base += get_frame_register_unsigned (frame, rm) << shift;
- }
- else
- /* Reserved. */
- load_pc = 0;
-
- if (load_pc)
- nextpc = get_frame_memory_unsigned (frame, base, 4);
- }
- else if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf000)
- {
- /* TBB. */
- CORE_ADDR tbl_reg, table, offset, length;
-
- tbl_reg = bits (inst1, 0, 3);
- if (tbl_reg == 0x0f)
- table = pc + 4; /* Regcache copy of PC isn't right yet. */
- else
- table = get_frame_register_unsigned (frame, tbl_reg);
-
- offset = get_frame_register_unsigned (frame, bits (inst2, 0, 3));
- length = 2 * get_frame_memory_unsigned (frame, table + offset, 1);
- nextpc = pc_val + length;
- }
- else if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf010)
- {
- /* TBH. */
- CORE_ADDR tbl_reg, table, offset, length;
-
- tbl_reg = bits (inst1, 0, 3);
- if (tbl_reg == 0x0f)
- table = pc + 4; /* Regcache copy of PC isn't right yet. */
- else
- table = get_frame_register_unsigned (frame, tbl_reg);
-
- offset = 2 * get_frame_register_unsigned (frame, bits (inst2, 0, 3));
- length = 2 * get_frame_memory_unsigned (frame, table + offset, 2);
- nextpc = pc_val + length;
- }
- }
- else if ((inst1 & 0xff00) == 0x4700) /* bx REG, blx REG */
- {
- if (bits (inst1, 3, 6) == 0x0f)
- nextpc = UNMAKE_THUMB_ADDR (pc_val);
- else
- nextpc = get_frame_register_unsigned (frame, bits (inst1, 3, 6));
- }
- else if ((inst1 & 0xff87) == 0x4687) /* mov pc, REG */
- {
- if (bits (inst1, 3, 6) == 0x0f)
- nextpc = pc_val;
- else
- nextpc = get_frame_register_unsigned (frame, bits (inst1, 3, 6));
-
- nextpc = MAKE_THUMB_ADDR (nextpc);
- }
- else if ((inst1 & 0xf500) == 0xb100)
- {
- /* CBNZ or CBZ. */
- int imm = (bit (inst1, 9) << 6) + (bits (inst1, 3, 7) << 1);
- ULONGEST reg = get_frame_register_unsigned (frame, bits (inst1, 0, 2));
-
- if (bit (inst1, 11) && reg != 0)
- nextpc = pc_val + imm;
- else if (!bit (inst1, 11) && reg == 0)
- nextpc = pc_val + imm;
- }
- return nextpc;
-}
-
-/* Get the raw next address. PC is the current program counter, in
- FRAME, which is assumed to be executing in ARM mode.
-
- The value returned has the execution state of the next instruction
- encoded in it. Use IS_THUMB_ADDR () to see whether the instruction is
- in Thumb-State, and gdbarch_addr_bits_remove () to get the plain memory
- address. */
-
-static CORE_ADDR
-arm_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
-{
- struct gdbarch *gdbarch = get_frame_arch (frame);
- enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
- enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
- unsigned long pc_val;
- unsigned long this_instr;
- unsigned long status;
- CORE_ADDR nextpc;
-
- pc_val = (unsigned long) pc;
- this_instr = read_memory_unsigned_integer (pc, 4, byte_order_for_code);
-
- status = get_frame_register_unsigned (frame, ARM_PS_REGNUM);
- nextpc = (CORE_ADDR) (pc_val + 4); /* Default case */
-
- if (bits (this_instr, 28, 31) == INST_NV)
- switch (bits (this_instr, 24, 27))
- {
- case 0xa:
- case 0xb:
- {
- /* Branch with Link and change to Thumb. */
- nextpc = BranchDest (pc, this_instr);
- nextpc |= bit (this_instr, 24) << 1;
- nextpc = MAKE_THUMB_ADDR (nextpc);
- break;
- }
- case 0xc:
- case 0xd:
- case 0xe:
- /* Coprocessor register transfer. */
- if (bits (this_instr, 12, 15) == 15)
- error (_("Invalid update to pc in instruction"));
- break;
- }
- else if (condition_true (bits (this_instr, 28, 31), status))
- {
- switch (bits (this_instr, 24, 27))
- {
- case 0x0:
- case 0x1: /* data processing */
- case 0x2:
- case 0x3:
- {
- unsigned long operand1, operand2, result = 0;
- unsigned long rn;
- int c;
-
- if (bits (this_instr, 12, 15) != 15)
- break;
-
- if (bits (this_instr, 22, 25) == 0
- && bits (this_instr, 4, 7) == 9) /* multiply */
- error (_("Invalid update to pc in instruction"));
-
- /* BX <reg>, BLX <reg> */
- if (bits (this_instr, 4, 27) == 0x12fff1
- || bits (this_instr, 4, 27) == 0x12fff3)
- {
- rn = bits (this_instr, 0, 3);
- nextpc = ((rn == ARM_PC_REGNUM)
- ? (pc_val + 8)
- : get_frame_register_unsigned (frame, rn));
-
- return nextpc;
- }
-
- /* Multiply into PC. */
- c = (status & FLAG_C) ? 1 : 0;
- rn = bits (this_instr, 16, 19);
- operand1 = ((rn == ARM_PC_REGNUM)
- ? (pc_val + 8)
- : get_frame_register_unsigned (frame, rn));
-
- if (bit (this_instr, 25))
- {
- unsigned long immval = bits (this_instr, 0, 7);
- unsigned long rotate = 2 * bits (this_instr, 8, 11);
- operand2 = ((immval >> rotate) | (immval << (32 - rotate)))
- & 0xffffffff;
- }
- else /* operand 2 is a shifted register. */
- operand2 = shifted_reg_val (frame, this_instr, c,
- pc_val, status);
-
- switch (bits (this_instr, 21, 24))
- {
- case 0x0: /*and */
- result = operand1 & operand2;
- break;
-
- case 0x1: /*eor */
- result = operand1 ^ operand2;
- break;
-
- case 0x2: /*sub */
- result = operand1 - operand2;
- break;
-
- case 0x3: /*rsb */
- result = operand2 - operand1;
- break;
-
- case 0x4: /*add */
- result = operand1 + operand2;
- break;
-
- case 0x5: /*adc */
- result = operand1 + operand2 + c;
- break;
-
- case 0x6: /*sbc */
- result = operand1 - operand2 + c;
- break;
-
- case 0x7: /*rsc */
- result = operand2 - operand1 + c;
- break;
-
- case 0x8:
- case 0x9:
- case 0xa:
- case 0xb: /* tst, teq, cmp, cmn */
- result = (unsigned long) nextpc;
- break;
-
- case 0xc: /*orr */
- result = operand1 | operand2;
- break;
-
- case 0xd: /*mov */
- /* Always step into a function. */
- result = operand2;
- break;
-
- case 0xe: /*bic */
- result = operand1 & ~operand2;
- break;
-
- case 0xf: /*mvn */
- result = ~operand2;
- break;
- }
-
- /* In 26-bit APCS the bottom two bits of the result are
- ignored, and we always end up in ARM state. */
- if (!arm_apcs_32)
- nextpc = arm_addr_bits_remove (gdbarch, result);
- else
- nextpc = result;
-
- break;
- }
-
- case 0x4:
- case 0x5: /* data transfer */
- case 0x6:
- case 0x7:
- if (bit (this_instr, 20))
- {
- /* load */
- if (bits (this_instr, 12, 15) == 15)
- {
- /* rd == pc */
- unsigned long rn;
- unsigned long base;
-
- if (bit (this_instr, 22))
- error (_("Invalid update to pc in instruction"));
-
- /* byte write to PC */
- rn = bits (this_instr, 16, 19);
- base = ((rn == ARM_PC_REGNUM)
- ? (pc_val + 8)
- : get_frame_register_unsigned (frame, rn));
-
- if (bit (this_instr, 24))
- {
- /* pre-indexed */
- int c = (status & FLAG_C) ? 1 : 0;
- unsigned long offset =
- (bit (this_instr, 25)
- ? shifted_reg_val (frame, this_instr, c, pc_val, status)
- : bits (this_instr, 0, 11));
-
- if (bit (this_instr, 23))
- base += offset;
- else
- base -= offset;
- }
- nextpc =
- (CORE_ADDR) read_memory_unsigned_integer ((CORE_ADDR) base,
- 4, byte_order);
- }
- }
- break;
-
- case 0x8:
- case 0x9: /* block transfer */
- if (bit (this_instr, 20))
- {
- /* LDM */
- if (bit (this_instr, 15))
- {
- /* loading pc */
- int offset = 0;
- unsigned long rn_val
- = get_frame_register_unsigned (frame,
- bits (this_instr, 16, 19));
-
- if (bit (this_instr, 23))
- {
- /* up */
- unsigned long reglist = bits (this_instr, 0, 14);
- offset = bitcount (reglist) * 4;
- if (bit (this_instr, 24)) /* pre */
- offset += 4;
- }
- else if (bit (this_instr, 24))
- offset = -4;
-
- nextpc =
- (CORE_ADDR) read_memory_unsigned_integer ((CORE_ADDR)
- (rn_val + offset),
- 4, byte_order);
- }
- }
- break;
-
- case 0xb: /* branch & link */
- case 0xa: /* branch */
- {
- nextpc = BranchDest (pc, this_instr);
- break;
- }
-
- case 0xc:
- case 0xd:
- case 0xe: /* coproc ops */
- break;
- case 0xf: /* SWI */
- {
- struct gdbarch_tdep *tdep;
- tdep = gdbarch_tdep (gdbarch);
-
- if (tdep->syscall_next_pc != NULL)
- nextpc = tdep->syscall_next_pc (frame);
-
- }
- break;
-
- default:
- fprintf_filtered (gdb_stderr, _("Bad bit-field extraction\n"));
- return (pc);
- }
- }
-
- return nextpc;
-}
-
-/* Determine next PC after current instruction executes. Will call either
- arm_get_next_pc_raw or thumb_get_next_pc_raw. Error out if infinite
- loop is detected. */
-
-CORE_ADDR
-arm_get_next_pc (struct frame_info *frame, CORE_ADDR pc)
-{
- CORE_ADDR nextpc;
-
- if (arm_frame_is_thumb (frame))
- nextpc = thumb_get_next_pc_raw (frame, pc);
- else
- nextpc = arm_get_next_pc_raw (frame, pc);
-
- return nextpc;
-}
-
-/* Like insert_single_step_breakpoint, but make sure we use a breakpoint
- of the appropriate mode (as encoded in the PC value), even if this
- differs from what would be expected according to the symbol tables. */
-
-void
-arm_insert_single_step_breakpoint (struct gdbarch *gdbarch,
- struct address_space *aspace,
- CORE_ADDR pc)
-{
- struct cleanup *old_chain
- = make_cleanup_restore_integer (&arm_override_mode);
-
- arm_override_mode = IS_THUMB_ADDR (pc);
- pc = gdbarch_addr_bits_remove (gdbarch, pc);
-
- insert_single_step_breakpoint (gdbarch, aspace, pc);
+ if (regnum >= ARM_F0_REGNUM && regnum < ARM_F0_REGNUM + NUM_FREGS)
+ {
+ if (!gdbarch_tdep (gdbarch)->have_fpa_registers)
+ return builtin_type (gdbarch)->builtin_void;
- do_cleanups (old_chain);
+ return arm_ext_type (gdbarch);
+ }
+ else if (regnum == ARM_SP_REGNUM)
+ return builtin_type (gdbarch)->builtin_data_ptr;
+ else if (regnum == ARM_PC_REGNUM)
+ return builtin_type (gdbarch)->builtin_func_ptr;
+ else if (regnum >= ARRAY_SIZE (arm_register_names))
+ /* These registers are only supported on targets which supply
+ an XML description. */
+ return builtin_type (gdbarch)->builtin_int0;
+ else
+ return builtin_type (gdbarch)->builtin_uint32;
}
-/* Checks for an atomic sequence of instructions beginning with a LDREX{,B,H,D}
- instruction and ending with a STREX{,B,H,D} instruction. If such a sequence
- is found, attempt to step through it. A breakpoint is placed at the end of
- the sequence. */
+/* Map a DWARF register REGNUM onto the appropriate GDB register
+ number. */
static int
-thumb_deal_with_atomic_sequence_raw (struct frame_info *frame)
+arm_dwarf_reg_to_regnum (struct gdbarch *gdbarch, int reg)
{
- struct gdbarch *gdbarch = get_frame_arch (frame);
- struct address_space *aspace = get_frame_address_space (frame);
- enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
- CORE_ADDR pc = get_frame_pc (frame);
- CORE_ADDR breaks[2] = {-1, -1};
- CORE_ADDR loc = pc;
- unsigned short insn1, insn2;
- int insn_count;
- int index;
- int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
- const int atomic_sequence_length = 16; /* Instruction sequence length. */
- ULONGEST status, itstate;
-
- /* We currently do not support atomic sequences within an IT block. */
- status = get_frame_register_unsigned (frame, ARM_PS_REGNUM);
- itstate = ((status >> 8) & 0xfc) | ((status >> 25) & 0x3);
- if (itstate & 0x0f)
- return 0;
-
- /* Assume all atomic sequences start with a ldrex{,b,h,d} instruction. */
- insn1 = read_memory_unsigned_integer (loc, 2, byte_order_for_code);
- loc += 2;
- if (thumb_insn_size (insn1) != 4)
- return 0;
-
- insn2 = read_memory_unsigned_integer (loc, 2, byte_order_for_code);
- loc += 2;
- if (!((insn1 & 0xfff0) == 0xe850
- || ((insn1 & 0xfff0) == 0xe8d0 && (insn2 & 0x00c0) == 0x0040)))
- return 0;
-
- /* Assume that no atomic sequence is longer than "atomic_sequence_length"
- instructions. */
- for (insn_count = 0; insn_count < atomic_sequence_length; ++insn_count)
- {
- insn1 = read_memory_unsigned_integer (loc, 2, byte_order_for_code);
- loc += 2;
-
- if (thumb_insn_size (insn1) != 4)
- {
- /* Assume that there is at most one conditional branch in the
- atomic sequence. If a conditional branch is found, put a
- breakpoint in its destination address. */
- if ((insn1 & 0xf000) == 0xd000 && bits (insn1, 8, 11) != 0x0f)
- {
- if (last_breakpoint > 0)
- return 0; /* More than one conditional branch found,
- fallback to the standard code. */
-
- breaks[1] = loc + 2 + (sbits (insn1, 0, 7) << 1);
- last_breakpoint++;
- }
+ /* Core integer regs. */
+ if (reg >= 0 && reg <= 15)
+ return reg;
- /* We do not support atomic sequences that use any *other*
- instructions but conditional branches to change the PC.
- Fall back to standard code to avoid losing control of
- execution. */
- else if (thumb_instruction_changes_pc (insn1))
- return 0;
- }
- else
- {
- insn2 = read_memory_unsigned_integer (loc, 2, byte_order_for_code);
- loc += 2;
-
- /* Assume that there is at most one conditional branch in the
- atomic sequence. If a conditional branch is found, put a
- breakpoint in its destination address. */
- if ((insn1 & 0xf800) == 0xf000
- && (insn2 & 0xd000) == 0x8000
- && (insn1 & 0x0380) != 0x0380)
- {
- int sign, j1, j2, imm1, imm2;
- unsigned int offset;
+ /* Legacy FPA encoding. These were once used in a way which
+ overlapped with VFP register numbering, so their use is
+ discouraged, but GDB doesn't support the ARM toolchain
+ which used them for VFP. */
+ if (reg >= 16 && reg <= 23)
+ return ARM_F0_REGNUM + reg - 16;
- sign = sbits (insn1, 10, 10);
- imm1 = bits (insn1, 0, 5);
- imm2 = bits (insn2, 0, 10);
- j1 = bit (insn2, 13);
- j2 = bit (insn2, 11);
+ /* New assignments for the FPA registers. */
+ if (reg >= 96 && reg <= 103)
+ return ARM_F0_REGNUM + reg - 96;
- offset = (sign << 20) + (j2 << 19) + (j1 << 18);
- offset += (imm1 << 12) + (imm2 << 1);
+ /* WMMX register assignments. */
+ if (reg >= 104 && reg <= 111)
+ return ARM_WCGR0_REGNUM + reg - 104;
- if (last_breakpoint > 0)
- return 0; /* More than one conditional branch found,
- fallback to the standard code. */
+ if (reg >= 112 && reg <= 127)
+ return ARM_WR0_REGNUM + reg - 112;
- breaks[1] = loc + offset;
- last_breakpoint++;
- }
+ if (reg >= 192 && reg <= 199)
+ return ARM_WC0_REGNUM + reg - 192;
- /* We do not support atomic sequences that use any *other*
- instructions but conditional branches to change the PC.
- Fall back to standard code to avoid losing control of
- execution. */
- else if (thumb2_instruction_changes_pc (insn1, insn2))
- return 0;
+ /* VFP v2 registers. A double precision value is actually
+ in d1 rather than s2, but the ABI only defines numbering
+ for the single precision registers. This will "just work"
+ in GDB for little endian targets (we'll read eight bytes,
+ starting in s0 and then progressing to s1), but will be
+ reversed on big endian targets with VFP. This won't
+ be a problem for the new Neon quad registers; you're supposed
+ to use DW_OP_piece for those. */
+ if (reg >= 64 && reg <= 95)
+ {
+ char name_buf[4];
- /* If we find a strex{,b,h,d}, we're done. */
- if ((insn1 & 0xfff0) == 0xe840
- || ((insn1 & 0xfff0) == 0xe8c0 && (insn2 & 0x00c0) == 0x0040))
- break;
- }
+ xsnprintf (name_buf, sizeof (name_buf), "s%d", reg - 64);
+ return user_reg_map_name_to_regnum (gdbarch, name_buf,
+ strlen (name_buf));
}
- /* If we didn't find the strex{,b,h,d}, we cannot handle the sequence. */
- if (insn_count == atomic_sequence_length)
- return 0;
-
- /* Insert a breakpoint right after the end of the atomic sequence. */
- breaks[0] = loc;
-
- /* Check for duplicated breakpoints. Check also for a breakpoint
- placed (branch instruction's destination) anywhere in sequence. */
- if (last_breakpoint
- && (breaks[1] == breaks[0]
- || (breaks[1] >= pc && breaks[1] < loc)))
- last_breakpoint = 0;
+ /* VFP v3 / Neon registers. This range is also used for VFP v2
+ registers, except that it now describes d0 instead of s0. */
+ if (reg >= 256 && reg <= 287)
+ {
+ char name_buf[4];
- /* Effectively inserts the breakpoints. */
- for (index = 0; index <= last_breakpoint; index++)
- arm_insert_single_step_breakpoint (gdbarch, aspace,
- MAKE_THUMB_ADDR (breaks[index]));
+ xsnprintf (name_buf, sizeof (name_buf), "d%d", reg - 256);
+ return user_reg_map_name_to_regnum (gdbarch, name_buf,
+ strlen (name_buf));
+ }
- return 1;
+ return -1;
}
+/* Map GDB internal REGNUM onto the Arm simulator register numbers. */
static int
-arm_deal_with_atomic_sequence_raw (struct frame_info *frame)
+arm_register_sim_regno (struct gdbarch *gdbarch, int regnum)
{
- struct gdbarch *gdbarch = get_frame_arch (frame);
- struct address_space *aspace = get_frame_address_space (frame);
- enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
- CORE_ADDR pc = get_frame_pc (frame);
- CORE_ADDR breaks[2] = {-1, -1};
- CORE_ADDR loc = pc;
- unsigned int insn;
- int insn_count;
- int index;
- int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
- const int atomic_sequence_length = 16; /* Instruction sequence length. */
-
- /* Assume all atomic sequences start with a ldrex{,b,h,d} instruction.
- Note that we do not currently support conditionally executed atomic
- instructions. */
- insn = read_memory_unsigned_integer (loc, 4, byte_order_for_code);
- loc += 4;
- if ((insn & 0xff9000f0) != 0xe1900090)
- return 0;
+ int reg = regnum;
+ gdb_assert (reg >= 0 && reg < gdbarch_num_regs (gdbarch));
- /* Assume that no atomic sequence is longer than "atomic_sequence_length"
- instructions. */
- for (insn_count = 0; insn_count < atomic_sequence_length; ++insn_count)
- {
- insn = read_memory_unsigned_integer (loc, 4, byte_order_for_code);
- loc += 4;
+ if (regnum >= ARM_WR0_REGNUM && regnum <= ARM_WR15_REGNUM)
+ return regnum - ARM_WR0_REGNUM + SIM_ARM_IWMMXT_COP0R0_REGNUM;
- /* Assume that there is at most one conditional branch in the atomic
- sequence. If a conditional branch is found, put a breakpoint in
- its destination address. */
- if (bits (insn, 24, 27) == 0xa)
- {
- if (last_breakpoint > 0)
- return 0; /* More than one conditional branch found, fallback
- to the standard single-step code. */
+ if (regnum >= ARM_WC0_REGNUM && regnum <= ARM_WC7_REGNUM)
+ return regnum - ARM_WC0_REGNUM + SIM_ARM_IWMMXT_COP1R0_REGNUM;
- breaks[1] = BranchDest (loc - 4, insn);
- last_breakpoint++;
- }
+ if (regnum >= ARM_WCGR0_REGNUM && regnum <= ARM_WCGR7_REGNUM)
+ return regnum - ARM_WCGR0_REGNUM + SIM_ARM_IWMMXT_COP1R8_REGNUM;
- /* We do not support atomic sequences that use any *other* instructions
- but conditional branches to change the PC. Fall back to standard
- code to avoid losing control of execution. */
- else if (arm_instruction_changes_pc (insn))
- return 0;
+ if (reg < NUM_GREGS)
+ return SIM_ARM_R0_REGNUM + reg;
+ reg -= NUM_GREGS;
- /* If we find a strex{,b,h,d}, we're done. */
- if ((insn & 0xff9000f0) == 0xe1800090)
- break;
- }
+ if (reg < NUM_FREGS)
+ return SIM_ARM_FP0_REGNUM + reg;
+ reg -= NUM_FREGS;
- /* If we didn't find the strex{,b,h,d}, we cannot handle the sequence. */
- if (insn_count == atomic_sequence_length)
- return 0;
+ if (reg < NUM_SREGS)
+ return SIM_ARM_FPS_REGNUM + reg;
+ reg -= NUM_SREGS;
- /* Insert a breakpoint right after the end of the atomic sequence. */
- breaks[0] = loc;
+ internal_error (__FILE__, __LINE__, _("Bad REGNUM %d"), regnum);
+}
- /* Check for duplicated breakpoints. Check also for a breakpoint
- placed (branch instruction's destination) anywhere in sequence. */
- if (last_breakpoint
- && (breaks[1] == breaks[0]
- || (breaks[1] >= pc && breaks[1] < loc)))
- last_breakpoint = 0;
+/* NOTE: cagney/2001-08-20: Both convert_from_extended() and
+ convert_to_extended() use floatformat_arm_ext_littlebyte_bigword.
+ It is thought that this is is the floating-point register format on
+ little-endian systems. */
- /* Effectively inserts the breakpoints. */
- for (index = 0; index <= last_breakpoint; index++)
- arm_insert_single_step_breakpoint (gdbarch, aspace, breaks[index]);
+static void
+convert_from_extended (const struct floatformat *fmt, const void *ptr,
+ void *dbl, int endianess)
+{
+ DOUBLEST d;
- return 1;
+ if (endianess == BFD_ENDIAN_BIG)
+ floatformat_to_doublest (&floatformat_arm_ext_big, ptr, &d);
+ else
+ floatformat_to_doublest (&floatformat_arm_ext_littlebyte_bigword,
+ ptr, &d);
+ floatformat_from_doublest (fmt, &d, dbl);
}
-int
-arm_deal_with_atomic_sequence (struct frame_info *frame)
+static void
+convert_to_extended (const struct floatformat *fmt, void *dbl, const void *ptr,
+ int endianess)
{
- if (arm_frame_is_thumb (frame))
- return thumb_deal_with_atomic_sequence_raw (frame);
+ DOUBLEST d;
+
+ floatformat_to_doublest (fmt, ptr, &d);
+ if (endianess == BFD_ENDIAN_BIG)
+ floatformat_from_doublest (&floatformat_arm_ext_big, &d, dbl);
else
- return arm_deal_with_atomic_sequence_raw (frame);
+ floatformat_from_doublest (&floatformat_arm_ext_littlebyte_bigword,
+ &d, dbl);
}
-/* single_step() is called just before we want to resume the inferior,
- if we want to single-step it but there is no hardware or kernel
- single-step support. We find the target of the coming instruction
- and breakpoint it. */
+/* Like insert_single_step_breakpoint, but make sure we use a breakpoint
+ of the appropriate mode (as encoded in the PC value), even if this
+ differs from what would be expected according to the symbol tables. */
-int
-arm_software_single_step (struct frame_info *frame)
+void
+arm_insert_single_step_breakpoint (struct gdbarch *gdbarch,
+ struct address_space *aspace,
+ CORE_ADDR pc)
{
- struct gdbarch *gdbarch = get_frame_arch (frame);
- struct address_space *aspace = get_frame_address_space (frame);
- CORE_ADDR next_pc;
+ struct cleanup *old_chain
+ = make_cleanup_restore_integer (&arm_override_mode);
- if (arm_deal_with_atomic_sequence (frame))
- return 1;
+ arm_override_mode = IS_THUMB_ADDR (pc);
+ pc = gdbarch_addr_bits_remove (gdbarch, pc);
- next_pc = arm_get_next_pc (frame, get_frame_pc (frame));
- arm_insert_single_step_breakpoint (gdbarch, aspace, next_pc);
+ insert_single_step_breakpoint (gdbarch, aspace, pc);
- return 1;
+ do_cleanups (old_chain);
}
/* Given BUF, which is OLD_LEN bytes ending at ENDADDR, expand
gdb_byte *new_buf;
int bytes_to_read = new_len - old_len;
- new_buf = xmalloc (new_len);
+ new_buf = (gdb_byte *) xmalloc (new_len);
memcpy (new_buf + bytes_to_read, buf, old_len);
xfree (buf);
if (target_read_memory (endaddr - new_len, new_buf, bytes_to_read) != 0)
/* No room for an IT instruction. */
return bpaddr;
- buf = xmalloc (buf_len);
+ buf = (gdb_byte *) xmalloc (buf_len);
if (target_read_memory (bpaddr - buf_len, buf, buf_len) != 0)
return bpaddr;
any = 0;
break;
}
}
+
if (any == 0)
{
xfree (buf);
return 0;
}
+/* Wrapper over read_memory_unsigned_integer for use in arm_get_next_pcs.
+ This is used to avoid a dependency on BFD's bfd_endian enum. */
+
+ULONGEST
+arm_get_next_pcs_read_memory_unsigned_integer (CORE_ADDR memaddr, int len,
+ int byte_order)
+{
+ return read_memory_unsigned_integer (memaddr, len,
+ (enum bfd_endian) byte_order);
+}
+
+/* Wrapper over gdbarch_addr_bits_remove for use in arm_get_next_pcs. */
+
+CORE_ADDR
+arm_get_next_pcs_addr_bits_remove (struct arm_get_next_pcs *self,
+ CORE_ADDR val)
+{
+ return gdbarch_addr_bits_remove (get_regcache_arch (self->regcache), val);
+}
+
+/* Wrapper over syscall_next_pc for use in get_next_pcs. */
+
+CORE_ADDR
+arm_get_next_pcs_syscall_next_pc (struct arm_get_next_pcs *self, CORE_ADDR pc)
+{
+ struct gdbarch_tdep *tdep;
+
+ tdep = gdbarch_tdep (get_regcache_arch (self->regcache));
+ if (tdep->syscall_next_pc != NULL)
+ return tdep->syscall_next_pc (self->regcache);
+
+ return 0;
+}
+
+/* Wrapper over arm_is_thumb for use in arm_get_next_pcs. */
+
+int
+arm_get_next_pcs_is_thumb (struct arm_get_next_pcs *self)
+{
+ return arm_is_thumb (self->regcache);
+}
+
+/* single_step() is called just before we want to resume the inferior,
+ if we want to single-step it but there is no hardware or kernel
+ single-step support. We find the target of the coming instructions
+ and breakpoint them. */
+
+int
+arm_software_single_step (struct frame_info *frame)
+{
+ struct regcache *regcache = get_current_regcache ();
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct address_space *aspace = get_regcache_aspace (regcache);
+ struct arm_get_next_pcs next_pcs_ctx;
+ CORE_ADDR pc;
+ int i;
+ VEC (CORE_ADDR) *next_pcs = NULL;
+ struct cleanup *old_chain = make_cleanup (VEC_cleanup (CORE_ADDR), &next_pcs);
+
+ arm_get_next_pcs_ctor (&next_pcs_ctx,
+ &arm_get_next_pcs_ops,
+ gdbarch_byte_order (gdbarch),
+ gdbarch_byte_order_for_code (gdbarch),
+ gdbarch_tdep (gdbarch)->thumb2_breakpoint,
+ regcache);
+
+ next_pcs = arm_get_next_pcs (&next_pcs_ctx, regcache_read_pc (regcache));
+
+ for (i = 0; VEC_iterate (CORE_ADDR, next_pcs, i, pc); i++)
+ arm_insert_single_step_breakpoint (gdbarch, aspace, pc);
+
+ do_cleanups (old_chain);
+
+ return 1;
+}
+
/* Cleanup/copy SVC (SWI) instructions. These two functions are overridden
for Linux, where some SVC instructions must be treated specially. */
CORE_ADDR from, CORE_ADDR to,
struct regcache *regs)
{
- struct displaced_step_closure *dsc
- = xmalloc (sizeof (struct displaced_step_closure));
+ struct displaced_step_closure *dsc = XNEW (struct displaced_step_closure);
+
arm_process_displaced_insn (gdbarch, from, to, regs, dsc);
arm_displaced_init_closure (gdbarch, from, to, dsc);
static int
gdb_print_insn_arm (bfd_vma memaddr, disassemble_info *info)
{
- struct gdbarch *gdbarch = info->application_data;
+ struct gdbarch *gdbarch = (struct gdbarch *) info->application_data;
if (arm_pc_is_thumb (gdbarch, memaddr))
{
static int
arm_return_in_memory (struct gdbarch *gdbarch, struct type *type)
{
- int nRc;
enum type_code code;
- CHECK_TYPEDEF (type);
-
- /* In the ARM ABI, "integer" like aggregate types are returned in
- registers. For an aggregate type to be integer like, its size
- must be less than or equal to INT_REGISTER_SIZE and the
- offset of each addressable subfield must be zero. Note that bit
- fields are not addressable, and all addressable subfields of
- unions always start at offset zero.
+ type = check_typedef (type);
- This function is based on the behaviour of GCC 2.95.1.
- See: gcc/arm.c: arm_return_in_memory() for details.
-
- Note: All versions of GCC before GCC 2.95.2 do not set up the
- parameters correctly for a function returning the following
- structure: struct { float f;}; This should be returned in memory,
- not a register. Richard Earnshaw sent me a patch, but I do not
- know of any way to detect if a function like the above has been
- compiled with the correct calling convention. */
+ /* Simple, non-aggregate types (ie not including vectors and
+ complex) are always returned in a register (or registers). */
+ code = TYPE_CODE (type);
+ if (TYPE_CODE_STRUCT != code && TYPE_CODE_UNION != code
+ && TYPE_CODE_ARRAY != code && TYPE_CODE_COMPLEX != code)
+ return 0;
- /* All aggregate types that won't fit in a register must be returned
- in memory. */
- if (TYPE_LENGTH (type) > INT_REGISTER_SIZE)
+ if (TYPE_CODE_ARRAY == code && TYPE_VECTOR (type))
{
- return 1;
+ /* Vector values should be returned using ARM registers if they
+ are not over 16 bytes. */
+ return (TYPE_LENGTH (type) > 16);
}
- /* The AAPCS says all aggregates not larger than a word are returned
- in a register. */
if (gdbarch_tdep (gdbarch)->arm_abi != ARM_ABI_APCS)
- return 0;
-
- /* The only aggregate types that can be returned in a register are
- structs and unions. Arrays must be returned in memory. */
- code = TYPE_CODE (type);
- if ((TYPE_CODE_STRUCT != code) && (TYPE_CODE_UNION != code))
{
+ /* The AAPCS says all aggregates not larger than a word are returned
+ in a register. */
+ if (TYPE_LENGTH (type) <= INT_REGISTER_SIZE)
+ return 0;
+
return 1;
}
+ else
+ {
+ int nRc;
+
+ /* All aggregate types that won't fit in a register must be returned
+ in memory. */
+ if (TYPE_LENGTH (type) > INT_REGISTER_SIZE)
+ return 1;
- /* Assume all other aggregate types can be returned in a register.
- Run a check for structures, unions and arrays. */
- nRc = 0;
+ /* In the ARM ABI, "integer" like aggregate types are returned in
+ registers. For an aggregate type to be integer like, its size
+ must be less than or equal to INT_REGISTER_SIZE and the
+ offset of each addressable subfield must be zero. Note that bit
+ fields are not addressable, and all addressable subfields of
+ unions always start at offset zero.
- if ((TYPE_CODE_STRUCT == code) || (TYPE_CODE_UNION == code))
- {
- int i;
- /* Need to check if this struct/union is "integer" like. For
- this to be true, its size must be less than or equal to
- INT_REGISTER_SIZE and the offset of each addressable
- subfield must be zero. Note that bit fields are not
- addressable, and unions always start at offset zero. If any
- of the subfields is a floating point type, the struct/union
- cannot be an integer type. */
-
- /* For each field in the object, check:
- 1) Is it FP? --> yes, nRc = 1;
- 2) Is it addressable (bitpos != 0) and
- not packed (bitsize == 0)?
- --> yes, nRc = 1
- */
-
- for (i = 0; i < TYPE_NFIELDS (type); i++)
- {
- enum type_code field_type_code;
- field_type_code = TYPE_CODE (check_typedef (TYPE_FIELD_TYPE (type,
- i)));
+ This function is based on the behaviour of GCC 2.95.1.
+ See: gcc/arm.c: arm_return_in_memory() for details.
- /* Is it a floating point type field? */
- if (field_type_code == TYPE_CODE_FLT)
- {
- nRc = 1;
- break;
- }
+ Note: All versions of GCC before GCC 2.95.2 do not set up the
+ parameters correctly for a function returning the following
+ structure: struct { float f;}; This should be returned in memory,
+ not a register. Richard Earnshaw sent me a patch, but I do not
+ know of any way to detect if a function like the above has been
+ compiled with the correct calling convention. */
+
+ /* Assume all other aggregate types can be returned in a register.
+ Run a check for structures, unions and arrays. */
+ nRc = 0;
- /* If bitpos != 0, then we have to care about it. */
- if (TYPE_FIELD_BITPOS (type, i) != 0)
+ if ((TYPE_CODE_STRUCT == code) || (TYPE_CODE_UNION == code))
+ {
+ int i;
+ /* Need to check if this struct/union is "integer" like. For
+ this to be true, its size must be less than or equal to
+ INT_REGISTER_SIZE and the offset of each addressable
+ subfield must be zero. Note that bit fields are not
+ addressable, and unions always start at offset zero. If any
+ of the subfields is a floating point type, the struct/union
+ cannot be an integer type. */
+
+ /* For each field in the object, check:
+ 1) Is it FP? --> yes, nRc = 1;
+ 2) Is it addressable (bitpos != 0) and
+ not packed (bitsize == 0)?
+ --> yes, nRc = 1
+ */
+
+ for (i = 0; i < TYPE_NFIELDS (type); i++)
{
- /* Bitfields are not addressable. If the field bitsize is
- zero, then the field is not packed. Hence it cannot be
- a bitfield or any other packed type. */
- if (TYPE_FIELD_BITSIZE (type, i) == 0)
+ enum type_code field_type_code;
+
+ field_type_code
+ = TYPE_CODE (check_typedef (TYPE_FIELD_TYPE (type,
+ i)));
+
+ /* Is it a floating point type field? */
+ if (field_type_code == TYPE_CODE_FLT)
{
nRc = 1;
break;
}
+
+ /* If bitpos != 0, then we have to care about it. */
+ if (TYPE_FIELD_BITPOS (type, i) != 0)
+ {
+ /* Bitfields are not addressable. If the field bitsize is
+ zero, then the field is not packed. Hence it cannot be
+ a bitfield or any other packed type. */
+ if (TYPE_FIELD_BITSIZE (type, i) == 0)
+ {
+ nRc = 1;
+ break;
+ }
+ }
}
}
- }
- return nRc;
+ return nRc;
+ }
}
/* Write into appropriate registers a function return value of type
|| arm_return_in_memory (gdbarch, valtype))
return RETURN_VALUE_STRUCT_CONVENTION;
}
-
- /* AAPCS returns complex types longer than a register in memory. */
- if (tdep->arm_abi != ARM_ABI_APCS
- && TYPE_CODE (valtype) == TYPE_CODE_COMPLEX
- && TYPE_LENGTH (valtype) > INT_REGISTER_SIZE)
- return RETURN_VALUE_STRUCT_CONVENTION;
+ else if (TYPE_CODE (valtype) == TYPE_CODE_COMPLEX)
+ {
+ if (arm_return_in_memory (gdbarch, valtype))
+ return RETURN_VALUE_STRUCT_CONVENTION;
+ }
if (writebuf)
arm_store_return_value (valtype, regcache, writebuf);
else
target_len -= strlen ("_from_arm");
- target_name = alloca (target_len + 1);
+ target_name = (char *) alloca (target_len + 1);
memcpy (target_name, name + 2, target_len);
target_name[target_len] = '\0';
for (fp_model = ARM_FLOAT_AUTO; fp_model != ARM_FLOAT_LAST; fp_model++)
if (strcmp (current_fp_model, fp_model_strings[fp_model]) == 0)
{
- arm_fp_model = fp_model;
+ arm_fp_model = (enum arm_float_model) fp_model;
break;
}
for (arm_abi = ARM_ABI_AUTO; arm_abi != ARM_ABI_LAST; arm_abi++)
if (strcmp (arm_abi_string, arm_abi_strings[arm_abi]) == 0)
{
- arm_abi_global = arm_abi;
+ arm_abi_global = (enum arm_abi_kind) arm_abi;
break;
}
static void
arm_objfile_data_free (struct objfile *objfile, void *arg)
{
- struct arm_per_objfile *data = arg;
+ struct arm_per_objfile *data = (struct arm_per_objfile *) arg;
unsigned int i;
for (i = 0; i < objfile->obfd->section_count; i++)
if (name[1] != 'a' && name[1] != 't' && name[1] != 'd')
return;
- data = objfile_data (objfile, arm_objfile_data_key);
+ data = (struct arm_per_objfile *) objfile_data (objfile,
+ arm_objfile_data_key);
if (data == NULL)
{
data = OBSTACK_ZALLOC (&objfile->objfile_obstack,
static struct value *
value_of_arm_user_reg (struct frame_info *frame, const void *baton)
{
- const int *reg_p = baton;
+ const int *reg_p = (const int *) baton;
return value_of_register (*reg_p, frame);
}
\f
enum arm_float_model fp_model = arm_fp_model;
struct tdesc_arch_data *tdesc_data = NULL;
int i, is_m = 0;
- int have_vfp_registers = 0, have_vfp_pseudos = 0, have_neon_pseudos = 0;
+ int vfp_register_count = 0, have_vfp_pseudos = 0, have_neon_pseudos = 0;
+ int have_wmmx_registers = 0;
int have_neon = 0;
int have_fpa_registers = 1;
const struct target_desc *tdesc = info.target_desc;
tdesc_data_cleanup (tdesc_data);
return NULL;
}
+
+ have_wmmx_registers = 1;
}
/* If we have a VFP unit, check whether the single precision registers
if (tdesc_unnumbered_register (feature, "s0") == 0)
have_vfp_pseudos = 1;
- have_vfp_registers = 1;
+ vfp_register_count = i;
/* If we have VFP, also check for NEON. The architecture allows
NEON without VFP (integer vector operations only), but GDB
return best_arch->gdbarch;
}
- tdep = xcalloc (1, sizeof (struct gdbarch_tdep));
+ tdep = XCNEW (struct gdbarch_tdep);
gdbarch = gdbarch_alloc (&info, tdep);
/* Record additional information about the architecture we are defining.
tdep->fp_model = fp_model;
tdep->is_m = is_m;
tdep->have_fpa_registers = have_fpa_registers;
- tdep->have_vfp_registers = have_vfp_registers;
+ tdep->have_wmmx_registers = have_wmmx_registers;
+ gdb_assert (vfp_register_count == 0
+ || vfp_register_count == 16
+ || vfp_register_count == 32);
+ tdep->vfp_register_count = vfp_register_count;
tdep->have_vfp_pseudos = have_vfp_pseudos;
tdep->have_neon_pseudos = have_neon_pseudos;
tdep->have_neon = have_neon;
/* Initialize the array that will be passed to
add_setshow_enum_cmd(). */
- valid_disassembly_styles
- = xmalloc ((num_disassembly_options + 1) * sizeof (char *));
+ valid_disassembly_styles = XNEWVEC (const char *,
+ num_disassembly_options + 1);
for (i = 0; i < num_disassembly_options; i++)
{
numregs = get_arm_regnames (i, &setname, &setdesc, ®names);