/* Common target dependent code for GDB on ARM systems.
Copyright (C) 1988, 1989, 1991, 1992, 1993, 1995, 1996, 1998, 1999, 2000,
- 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+ 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Free Software Foundation, Inc.
This file is part of GDB.
#include "elf/arm.h"
#include "gdb_assert.h"
+#include "vec.h"
static int arm_debug;
MSYMBOL_IS_SPECIAL Tests the "special" bit in a minimal symbol. */
#define MSYMBOL_SET_SPECIAL(msym) \
- MSYMBOL_INFO (msym) = (char *) (((long) MSYMBOL_INFO (msym)) \
- | 0x80000000)
+ MSYMBOL_TARGET_FLAG_1 (msym) = 1
#define MSYMBOL_IS_SPECIAL(msym) \
- (((long) MSYMBOL_INFO (msym) & 0x80000000) != 0)
+ MSYMBOL_TARGET_FLAG_1 (msym)
+
+/* Macros for swapping shorts and ints. In the unlikely case that anybody else needs these,
+ move to a general header. (A better solution might be to define memory read routines that
+ know whether they are reading code or data.) */
+
+#define SWAP_SHORT(x) \
+ ((((x) & 0xff00) >> 8) | (((x) & 0x00ff) << 8));
+
+#define SWAP_INT(x) \
+ ( ((x & 0xff000000) >> 24) \
+ | ((x & 0x00ff0000) >> 8) \
+ | ((x & 0x0000ff00) << 8) \
+ | ((x & 0x000000ff) << 24))
+
+/* Per-objfile data used for mapping symbols. */
+static const struct objfile_data *arm_objfile_data_key;
+
+struct arm_mapping_symbol
+{
+ bfd_vma value;
+ char type;
+};
+typedef struct arm_mapping_symbol arm_mapping_symbol_s;
+DEF_VEC_O(arm_mapping_symbol_s);
+
+struct arm_per_objfile
+{
+ VEC(arm_mapping_symbol_s) **section_maps;
+};
/* The list of available "set arm ..." and "show arm ..." commands. */
static struct cmd_list_element *setarmcmdlist = NULL;
static enum arm_abi_kind arm_abi_global = ARM_ABI_AUTO;
static const char *arm_abi_string = "auto";
+/* The execution mode to assume. */
+static const char *arm_mode_strings[] =
+ {
+ "auto",
+ "arm",
+ "thumb"
+ };
+
+static const char *arm_fallback_mode_string = "auto";
+static const char *arm_force_mode_string = "auto";
+
/* Number of different reg name sets (options). */
static int num_disassembly_options;
int arm_apcs_32 = 1;
+/* Determine if FRAME is executing in Thumb mode. */
+
+static int
+arm_frame_is_thumb (struct frame_info *frame)
+{
+ CORE_ADDR cpsr;
+
+ /* Every ARM frame unwinder can unwind the T bit of the CPSR, either
+ directly (from a signal frame or dummy frame) or by interpreting
+ the saved LR (from a prologue or DWARF frame). So consult it and
+ trust the unwinders. */
+ cpsr = get_frame_register_unsigned (frame, ARM_PS_REGNUM);
+
+ return (cpsr & CPSR_T) != 0;
+}
+
+/* Callback for VEC_lower_bound. */
+
+static inline int
+arm_compare_mapping_symbols (const struct arm_mapping_symbol *lhs,
+ const struct arm_mapping_symbol *rhs)
+{
+ return lhs->value < rhs->value;
+}
+
/* Determine if the program counter specified in MEMADDR is in a Thumb
- function. */
+ function. This function should be called for addresses unrelated to
+ any executing frame; otherwise, prefer arm_frame_is_thumb. */
static int
arm_pc_is_thumb (CORE_ADDR memaddr)
{
+ struct obj_section *sec;
struct minimal_symbol *sym;
/* If bit 0 of the address is set, assume this is a Thumb address. */
if (IS_THUMB_ADDR (memaddr))
return 1;
+ /* If the user wants to override the symbol table, let him. */
+ if (strcmp (arm_force_mode_string, "arm") == 0)
+ return 0;
+ if (strcmp (arm_force_mode_string, "thumb") == 0)
+ return 1;
+
+ /* If there are mapping symbols, consult them. */
+ sec = find_pc_section (memaddr);
+ if (sec != NULL)
+ {
+ struct arm_per_objfile *data;
+ VEC(arm_mapping_symbol_s) *map;
+ struct arm_mapping_symbol map_key = { memaddr - obj_section_addr (sec),
+ 0 };
+ unsigned int idx;
+
+ data = objfile_data (sec->objfile, arm_objfile_data_key);
+ if (data != NULL)
+ {
+ map = data->section_maps[sec->the_bfd_section->index];
+ if (!VEC_empty (arm_mapping_symbol_s, map))
+ {
+ struct arm_mapping_symbol *map_sym;
+
+ idx = VEC_lower_bound (arm_mapping_symbol_s, map, &map_key,
+ arm_compare_mapping_symbols);
+
+ /* VEC_lower_bound finds the earliest ordered insertion
+ point. If the following symbol starts at this exact
+ address, we use that; otherwise, the preceding
+ mapping symbol covers this address. */
+ if (idx < VEC_length (arm_mapping_symbol_s, map))
+ {
+ map_sym = VEC_index (arm_mapping_symbol_s, map, idx);
+ if (map_sym->value == map_key.value)
+ return map_sym->type == 't';
+ }
+
+ if (idx > 0)
+ {
+ map_sym = VEC_index (arm_mapping_symbol_s, map, idx - 1);
+ return map_sym->type == 't';
+ }
+ }
+ }
+ }
+
/* Thumb functions have a "special" bit set in minimal symbols. */
sym = lookup_minimal_symbol_by_pc (memaddr);
if (sym)
- {
- return (MSYMBOL_IS_SPECIAL (sym));
- }
- else
- {
- return 0;
- }
+ return (MSYMBOL_IS_SPECIAL (sym));
+
+ /* If the user wants to override the fallback mode, let them. */
+ if (strcmp (arm_fallback_mode_string, "arm") == 0)
+ return 0;
+ if (strcmp (arm_fallback_mode_string, "thumb") == 0)
+ return 1;
+
+ /* If we couldn't find any symbol, but we're talking to a running
+ target, then trust the current value of $cpsr. This lets
+ "display/i $pc" always show the correct mode (though if there is
+ a symbol table we will not reach here, so it still may not be
+ displayed in the mode it will be executed). */
+ if (target_has_registers)
+ return arm_frame_is_thumb (get_current_frame ());
+
+ /* Otherwise we're out of luck; we assume ARM. */
+ return 0;
}
/* Remove useless bits from addresses in a running program. */
static CORE_ADDR
-arm_addr_bits_remove (CORE_ADDR val)
+arm_addr_bits_remove (struct gdbarch *gdbarch, CORE_ADDR val)
{
if (arm_apcs_32)
return UNMAKE_THUMB_ADDR (val);
/* When reading symbols, we need to zap the low bit of the address,
which may be set to 1 for Thumb functions. */
static CORE_ADDR
-arm_smash_text_address (CORE_ADDR val)
+arm_smash_text_address (struct gdbarch *gdbarch, CORE_ADDR val)
{
return val & ~1;
}
stack = make_pv_area (ARM_SP_REGNUM);
back_to = make_cleanup_free_pv_area (stack);
- /* The call instruction saved PC in LR, and the current PC is not
- interesting. Due to this file's conventions, we want the value
- of LR at this function's entry, not at the call site, so we do
- not record the save of the PC - when the ARM prologue analyzer
- has also been converted to the pv mechanism, we could record the
- save here and remove the hack in prev_register. */
- regs[ARM_PC_REGNUM] = pv_unknown ();
-
while (start < limit)
{
unsigned short insn;
insn = read_memory_unsigned_integer (start, 2);
+ if (gdbarch_byte_order_for_code (gdbarch) != gdbarch_byte_order (gdbarch))
+ insn = SWAP_SHORT (insn);
+
if ((insn & 0xfe00) == 0xb400) /* push { rlist } */
{
int regno;
{
unsigned long inst;
CORE_ADDR skip_pc;
- CORE_ADDR func_addr, func_end = 0;
- char *func_name;
+ CORE_ADDR func_addr, limit_pc;
struct symtab_and_line sal;
/* If we're in a dummy frame, don't even try to skip the prologue. */
if (deprecated_pc_in_call_dummy (pc))
return pc;
- /* See what the symbol table says. */
-
- if (find_pc_partial_function (pc, &func_name, &func_addr, &func_end))
+ /* See if we can determine the end of the prologue via the symbol table.
+ If so, then return either PC, or the PC after the prologue, whichever
+ is greater. */
+ if (find_pc_partial_function (pc, NULL, &func_addr, NULL))
{
- struct symbol *sym;
-
- /* Found a function. */
- sym = lookup_symbol (func_name, NULL, VAR_DOMAIN, NULL, NULL);
- if (sym && SYMBOL_LANGUAGE (sym) != language_asm)
- {
- /* Don't use this trick for assembly source files. */
- sal = find_pc_line (func_addr, 0);
- if ((sal.line != 0) && (sal.end < func_end))
- return sal.end;
- }
+ CORE_ADDR post_prologue_pc = skip_prologue_using_sal (func_addr);
+ if (post_prologue_pc != 0)
+ return max (pc, post_prologue_pc);
}
- /* Can't find the prologue end in the symbol table, try it the hard way
- by disassembling the instructions. */
+ /* Can't determine prologue from the symbol table, need to examine
+ instructions. */
+ /* Find an upper limit on the function prologue using the debug
+ information. If the debug information could not be used to provide
+ that bound, then use an arbitrary large number as the upper bound. */
/* Like arm_scan_prologue, stop no later than pc + 64. */
- if (func_end == 0 || func_end > pc + 64)
- func_end = pc + 64;
+ limit_pc = skip_prologue_using_sal (pc);
+ if (limit_pc == 0)
+ limit_pc = pc + 64; /* Magic. */
+
/* Check if this is Thumb code. */
if (arm_pc_is_thumb (pc))
- return thumb_analyze_prologue (gdbarch, pc, func_end, NULL);
+ return thumb_analyze_prologue (gdbarch, pc, limit_pc, NULL);
- for (skip_pc = pc; skip_pc < func_end; skip_pc += 4)
+ for (skip_pc = pc; skip_pc < limit_pc; skip_pc += 4)
{
inst = read_memory_unsigned_integer (skip_pc, 4);
+ if (gdbarch_byte_order_for_code (gdbarch) != gdbarch_byte_order (gdbarch))
+ inst = SWAP_INT (inst);
+
/* "mov ip, sp" is no longer a required part of the prologue. */
if (inst == 0xe1a0c00d) /* mov ip, sp */
continue;
static void
thumb_scan_prologue (struct gdbarch *gdbarch, CORE_ADDR prev_pc,
- struct arm_prologue_cache *cache)
+ CORE_ADDR block_addr, struct arm_prologue_cache *cache)
{
CORE_ADDR prologue_start;
CORE_ADDR prologue_end;
CORE_ADDR current_pc;
- /* Which register has been copied to register n? */
- int saved_reg[16];
- /* findmask:
- bit 0 - push { rlist }
- bit 1 - mov r7, sp OR add r7, sp, #imm (setting of r7)
- bit 2 - sub sp, #simm OR add sp, #simm (adjusting of sp)
- */
- int findmask = 0;
- int i;
- if (find_pc_partial_function (prev_pc, NULL, &prologue_start, &prologue_end))
+ if (find_pc_partial_function (block_addr, NULL, &prologue_start,
+ &prologue_end))
{
struct symtab_and_line sal = find_pc_line (prologue_start, 0);
int regno;
CORE_ADDR prologue_start, prologue_end, current_pc;
CORE_ADDR prev_pc = get_frame_pc (this_frame);
+ CORE_ADDR block_addr = get_frame_address_in_block (this_frame);
pv_t regs[ARM_FPS_REGNUM];
struct pv_area *stack;
struct cleanup *back_to;
cache->framesize = 0;
/* Check for Thumb prologue. */
- if (arm_pc_is_thumb (prev_pc))
+ if (arm_frame_is_thumb (this_frame))
{
- thumb_scan_prologue (gdbarch, prev_pc, cache);
+ thumb_scan_prologue (gdbarch, prev_pc, block_addr, cache);
return;
}
/* Find the function prologue. If we can't find the function in
the symbol table, peek in the stack frame to find the PC. */
- if (find_pc_partial_function (prev_pc, NULL, &prologue_start, &prologue_end))
+ if (find_pc_partial_function (block_addr, NULL, &prologue_start,
+ &prologue_end))
{
/* One way to find the end of the prologue (which works well
for unoptimized code) is to do the following:
stack = make_pv_area (ARM_SP_REGNUM);
back_to = make_cleanup_free_pv_area (stack);
- regs[ARM_PC_REGNUM] = pv_unknown ();
-
for (current_pc = prologue_start;
current_pc < prologue_end;
current_pc += 4)
{
unsigned int insn = read_memory_unsigned_integer (current_pc, 4);
+ if (gdbarch_byte_order_for_code (gdbarch) != gdbarch_byte_order (gdbarch))
+ insn = SWAP_INT (insn);
+
if (insn == 0xe1a0c00d) /* mov ip, sp */
{
regs[ARM_IP_REGNUM] = regs[ARM_SP_REGNUM];
{
struct arm_prologue_cache *cache;
struct frame_id id;
- CORE_ADDR func;
+ CORE_ADDR pc, func;
if (*this_cache == NULL)
*this_cache = arm_make_prologue_cache (this_frame);
cache = *this_cache;
- func = get_frame_func (this_frame);
-
- /* This is meant to halt the backtrace at "_start". Make sure we
- don't halt it at a generic dummy frame. */
- if (func <= gdbarch_tdep (get_frame_arch (this_frame))->lowest_pc)
+ /* This is meant to halt the backtrace at "_start". */
+ pc = get_frame_pc (this_frame);
+ if (pc <= gdbarch_tdep (get_frame_arch (this_frame))->lowest_pc)
return;
/* If we've hit a wall, stop. */
if (cache->prev_sp == 0)
return;
+ func = get_frame_func (this_frame);
id = frame_id_build (cache->prev_sp, func);
*this_id = id;
}
void **this_cache,
int prev_regnum)
{
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
struct arm_prologue_cache *cache;
if (*this_cache == NULL)
cache = *this_cache;
/* If we are asked to unwind the PC, then we need to return the LR
- instead. The saved value of PC points into this frame's
- prologue, not the next frame's resume location. */
+ instead. The prologue may save PC, but it will point into this
+ frame's prologue, not the next frame's resume location. Also
+ strip the saved T bit. A valid LR may have the low bit set, but
+ a valid PC never does. */
if (prev_regnum == ARM_PC_REGNUM)
- prev_regnum = ARM_LR_REGNUM;
+ {
+ CORE_ADDR lr;
+
+ lr = frame_unwind_register_unsigned (this_frame, ARM_LR_REGNUM);
+ return frame_unwind_got_constant (this_frame, prev_regnum,
+ arm_addr_bits_remove (gdbarch, lr));
+ }
/* SP is generally not saved to the stack, but this frame is
identified by the next frame's stack pointer at the time of the call.
if (prev_regnum == ARM_SP_REGNUM)
return frame_unwind_got_constant (this_frame, prev_regnum, cache->prev_sp);
+ /* The CPSR may have been changed by the call instruction and by the
+ called function. The only bit we can reconstruct is the T bit,
+ by checking the low bit of LR as of the call. This is a reliable
+ indicator of Thumb-ness except for some ARM v4T pre-interworking
+ Thumb code, which could get away with a clear low bit as long as
+ the called function did not use bx. Guess that all other
+ bits are unchanged; the condition flags are presumably lost,
+ but the processor status is likely valid. */
+ if (prev_regnum == ARM_PS_REGNUM)
+ {
+ CORE_ADDR lr, cpsr;
+
+ cpsr = get_frame_register_unsigned (this_frame, prev_regnum);
+ lr = frame_unwind_register_unsigned (this_frame, ARM_LR_REGNUM);
+ if (IS_THUMB_ADDR (lr))
+ cpsr |= CPSR_T;
+ else
+ cpsr &= ~CPSR_T;
+ return frame_unwind_got_constant (this_frame, prev_regnum, cpsr);
+ }
+
return trad_frame_get_prev_register (this_frame, cache->saved_regs,
prev_regnum);
}
{
CORE_ADDR pc;
pc = frame_unwind_register_unsigned (this_frame, ARM_PC_REGNUM);
- return arm_addr_bits_remove (pc);
+ return arm_addr_bits_remove (gdbarch, pc);
}
static CORE_ADDR
return frame_unwind_register_unsigned (this_frame, ARM_SP_REGNUM);
}
+static struct value *
+arm_dwarf2_prev_register (struct frame_info *this_frame, void **this_cache,
+ int regnum)
+{
+ struct gdbarch * gdbarch = get_frame_arch (this_frame);
+ CORE_ADDR lr, cpsr;
+
+ switch (regnum)
+ {
+ case ARM_PC_REGNUM:
+ /* The PC is normally copied from the return column, which
+ describes saves of LR. However, that version may have an
+ extra bit set to indicate Thumb state. The bit is not
+ part of the PC. */
+ lr = frame_unwind_register_unsigned (this_frame, ARM_LR_REGNUM);
+ return frame_unwind_got_constant (this_frame, regnum,
+ arm_addr_bits_remove (gdbarch, lr));
+
+ case ARM_PS_REGNUM:
+ /* Reconstruct the T bit; see arm_prologue_prev_register for details. */
+ cpsr = get_frame_register_unsigned (this_frame, regnum);
+ lr = frame_unwind_register_unsigned (this_frame, ARM_LR_REGNUM);
+ if (IS_THUMB_ADDR (lr))
+ cpsr |= CPSR_T;
+ else
+ cpsr &= ~CPSR_T;
+ return frame_unwind_got_constant (this_frame, regnum, cpsr);
+
+ default:
+ internal_error (__FILE__, __LINE__,
+ _("Unexpected register %d"), regnum);
+ }
+}
+
+static void
+arm_dwarf2_frame_init_reg (struct gdbarch *gdbarch, int regnum,
+ struct dwarf2_frame_state_reg *reg,
+ struct frame_info *this_frame)
+{
+ switch (regnum)
+ {
+ case ARM_PC_REGNUM:
+ case ARM_PS_REGNUM:
+ reg->how = DWARF2_FRAME_REG_FN;
+ reg->loc.fn = arm_dwarf2_prev_register;
+ break;
+ case ARM_SP_REGNUM:
+ reg->how = DWARF2_FRAME_REG_CFA;
+ break;
+ }
+}
+
/* When arguments must be pushed onto the stack, they go on in reverse
order. The code below implements a FILO (stack) to do this. */
if (regnum >= ARM_F0_REGNUM && regnum < ARM_F0_REGNUM + NUM_FREGS)
return builtin_type_arm_ext;
else if (regnum == ARM_SP_REGNUM)
- return builtin_type_void_data_ptr;
+ return builtin_type (gdbarch)->builtin_data_ptr;
else if (regnum == ARM_PC_REGNUM)
- return builtin_type_void_func_ptr;
+ return builtin_type (gdbarch)->builtin_func_ptr;
else if (regnum >= ARRAY_SIZE (arm_register_names))
/* These registers are only supported on targets which supply
an XML description. */
CORE_ADDR nextpc = pc + 2; /* default is next instruction */
unsigned long offset;
+ if (gdbarch_byte_order_for_code (gdbarch) != gdbarch_byte_order (gdbarch))
+ inst1 = SWAP_SHORT (inst1);
+
if ((inst1 & 0xff00) == 0xbd00) /* pop {rlist, pc} */
{
CORE_ADDR sp;
else if ((inst1 & 0xf800) == 0xf000) /* long branch with link, and blx */
{
unsigned short inst2 = read_memory_unsigned_integer (pc + 2, 2);
+ if (gdbarch_byte_order_for_code (gdbarch) != gdbarch_byte_order (gdbarch))
+ inst2 = SWAP_SHORT (inst2);
offset = (sbits (inst1, 0, 10) << 12) + (bits (inst2, 0, 10) << 1);
nextpc = pc_val + offset;
/* For BLX make sure to clear the low bits. */
unsigned long status;
CORE_ADDR nextpc;
- if (arm_pc_is_thumb (pc))
+ if (arm_frame_is_thumb (frame))
return thumb_get_next_pc (frame, pc);
pc_val = (unsigned long) pc;
this_instr = read_memory_unsigned_integer (pc, 4);
+
+ if (gdbarch_byte_order_for_code (gdbarch) != gdbarch_byte_order (gdbarch))
+ this_instr = SWAP_INT (this_instr);
+
status = get_frame_register_unsigned (frame, ARM_PS_REGNUM);
nextpc = (CORE_ADDR) (pc_val + 4); /* Default case */
struct gdbarch_info info;
/* If the current architecture is not ARM, we have nothing to do. */
- if (gdbarch_bfd_arch_info (current_gdbarch)->arch != bfd_arch_arm)
+ if (gdbarch_bfd_arch_info (target_gdbarch)->arch != bfd_arch_arm)
return;
/* Update the architecture. */
show_fp_model (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (target_gdbarch);
if (arm_fp_model == ARM_FLOAT_AUTO
- && gdbarch_bfd_arch_info (current_gdbarch)->arch == bfd_arch_arm)
+ && gdbarch_bfd_arch_info (target_gdbarch)->arch == bfd_arch_arm)
fprintf_filtered (file, _("\
The current ARM floating point model is \"auto\" (currently \"%s\").\n"),
fp_model_strings[tdep->fp_model]);
arm_show_abi (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (target_gdbarch);
if (arm_abi_global == ARM_ABI_AUTO
- && gdbarch_bfd_arch_info (current_gdbarch)->arch == bfd_arch_arm)
+ && gdbarch_bfd_arch_info (target_gdbarch)->arch == bfd_arch_arm)
fprintf_filtered (file, _("\
The current ARM ABI is \"auto\" (currently \"%s\").\n"),
arm_abi_strings[tdep->arm_abi]);
arm_abi_string);
}
+static void
+arm_show_fallback_mode (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (target_gdbarch);
+
+ fprintf_filtered (file, _("\
+The current execution mode assumed (when symbols are unavailable) is \"%s\".\n"),
+ arm_fallback_mode_string);
+}
+
+static void
+arm_show_force_mode (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (target_gdbarch);
+
+ fprintf_filtered (file, _("\
+The current execution mode assumed (even when symbols are available) is \"%s\".\n"),
+ arm_force_mode_string);
+}
+
/* If the user changes the register disassembly style used for info
register and other commands, we have to also switch the style used
in opcodes for disassembly output. This function is run in the "set
MSYMBOL_SET_SPECIAL (msym);
}
+static void
+arm_objfile_data_cleanup (struct objfile *objfile, void *arg)
+{
+ struct arm_per_objfile *data = arg;
+ unsigned int i;
+
+ for (i = 0; i < objfile->obfd->section_count; i++)
+ VEC_free (arm_mapping_symbol_s, data->section_maps[i]);
+}
+
+static void
+arm_record_special_symbol (struct gdbarch *gdbarch, struct objfile *objfile,
+ asymbol *sym)
+{
+ const char *name = bfd_asymbol_name (sym);
+ struct arm_per_objfile *data;
+ VEC(arm_mapping_symbol_s) **map_p;
+ struct arm_mapping_symbol new_map_sym;
+
+ gdb_assert (name[0] == '$');
+ if (name[1] != 'a' && name[1] != 't' && name[1] != 'd')
+ return;
+
+ data = objfile_data (objfile, arm_objfile_data_key);
+ if (data == NULL)
+ {
+ data = OBSTACK_ZALLOC (&objfile->objfile_obstack,
+ struct arm_per_objfile);
+ set_objfile_data (objfile, arm_objfile_data_key, data);
+ data->section_maps = OBSTACK_CALLOC (&objfile->objfile_obstack,
+ objfile->obfd->section_count,
+ VEC(arm_mapping_symbol_s) *);
+ }
+ map_p = &data->section_maps[bfd_get_section (sym)->index];
+
+ new_map_sym.value = sym->value;
+ new_map_sym.type = name[1];
+
+ /* Assume that most mapping symbols appear in order of increasing
+ value. If they were randomly distributed, it would be faster to
+ always push here and then sort at first use. */
+ if (!VEC_empty (arm_mapping_symbol_s, *map_p))
+ {
+ struct arm_mapping_symbol *prev_map_sym;
+
+ prev_map_sym = VEC_last (arm_mapping_symbol_s, *map_p);
+ if (prev_map_sym->value >= sym->value)
+ {
+ unsigned int idx;
+ idx = VEC_lower_bound (arm_mapping_symbol_s, *map_p, &new_map_sym,
+ arm_compare_mapping_symbols);
+ VEC_safe_insert (arm_mapping_symbol_s, *map_p, idx, &new_map_sym);
+ return;
+ }
+ }
+
+ VEC_safe_push (arm_mapping_symbol_s, *map_p, &new_map_sym);
+}
+
static void
arm_write_pc (struct regcache *regcache, CORE_ADDR pc)
{
ULONGEST val;
regcache_cooked_read_unsigned (regcache, ARM_PS_REGNUM, &val);
if (arm_pc_is_thumb (pc))
- regcache_cooked_write_unsigned (regcache, ARM_PS_REGNUM, val | 0x20);
+ regcache_cooked_write_unsigned (regcache, ARM_PS_REGNUM, val | CPSR_T);
else
regcache_cooked_write_unsigned (regcache, ARM_PS_REGNUM,
- val & ~(ULONGEST) 0x20);
+ val & ~(ULONGEST) CPSR_T);
}
}
break;
}
}
+
+ if (e_flags & EF_ARM_BE8)
+ info.byte_order_for_code = BFD_ENDIAN_LITTLE;
+
break;
default:
tdep->have_fpa_registers = have_fpa_registers;
/* Breakpoints. */
- switch (info.byte_order)
+ switch (info.byte_order_for_code)
{
case BFD_ENDIAN_BIG:
tdep->arm_breakpoint = arm_default_arm_be_breakpoint;
set_gdbarch_print_float_info (gdbarch, arm_print_float_info);
/* Internal <-> external register number maps. */
- set_gdbarch_dwarf_reg_to_regnum (gdbarch, arm_dwarf_reg_to_regnum);
set_gdbarch_dwarf2_reg_to_regnum (gdbarch, arm_dwarf_reg_to_regnum);
set_gdbarch_register_sim_regno (gdbarch, arm_register_sim_regno);
set_gdbarch_elf_make_msymbol_special (gdbarch, arm_elf_make_msymbol_special);
set_gdbarch_coff_make_msymbol_special (gdbarch,
arm_coff_make_msymbol_special);
+ set_gdbarch_record_special_symbol (gdbarch, arm_record_special_symbol);
/* Virtual tables. */
set_gdbarch_vbit_in_delta (gdbarch, 1);
/* Hook in the ABI-specific overrides, if they have been registered. */
gdbarch_init_osabi (info, gdbarch);
+ dwarf2_frame_set_init_reg (gdbarch, arm_dwarf2_frame_init_reg);
+
/* Add some default predicates. */
frame_unwind_append_unwinder (gdbarch, &arm_stub_unwind);
dwarf2_append_unwinders (gdbarch);
gdbarch_register (bfd_arch_arm, arm_gdbarch_init, arm_dump_tdep);
+ arm_objfile_data_key
+ = register_objfile_data_with_cleanup (arm_objfile_data_cleanup);
+
/* Register an ELF OS ABI sniffer for ARM binaries. */
gdbarch_register_osabi_sniffer (bfd_arch_arm,
bfd_target_elf_flavour,
NULL, arm_set_abi, arm_show_abi,
&setarmcmdlist, &showarmcmdlist);
+ /* Add two commands to allow the user to force the assumed
+ execution mode. */
+ add_setshow_enum_cmd ("fallback-mode", class_support,
+ arm_mode_strings, &arm_fallback_mode_string,
+ _("Set the mode assumed when symbols are unavailable."),
+ _("Show the mode assumed when symbols are unavailable."),
+ NULL, NULL, arm_show_fallback_mode,
+ &setarmcmdlist, &showarmcmdlist);
+ add_setshow_enum_cmd ("force-mode", class_support,
+ arm_mode_strings, &arm_force_mode_string,
+ _("Set the mode assumed even when symbols are available."),
+ _("Show the mode assumed even when symbols are available."),
+ NULL, NULL, arm_show_force_mode,
+ &setarmcmdlist, &showarmcmdlist);
+
/* Debugging flag. */
add_setshow_boolean_cmd ("arm", class_maintenance, &arm_debug,
_("Set ARM debugging."),
projects / deliverable / binutils-gdb.git / blobdiff