/* Everything about breakpoints, for GDB.
- Copyright 1986, 1987, 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
+ Copyright 1986, 1987, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996
+ Free Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include "defs.h"
#include <ctype.h>
#include "gdbcore.h"
#include "gdbcmd.h"
#include "value.h"
-#include "ctype.h"
#include "command.h"
#include "inferior.h"
#include "thread.h"
#include "target.h"
#include "language.h"
-#include <string.h>
+#include "gdb_string.h"
#include "demangle.h"
#include "annotate.h"
static void
disable_command PARAMS ((char *, int));
-static void
-disable_breakpoint PARAMS ((struct breakpoint *));
-
static void
enable_command PARAMS ((char *, int));
-static void
-enable_breakpoint PARAMS ((struct breakpoint *));
-
static void
map_breakpoint_numbers PARAMS ((char *, void (*)(struct breakpoint *)));
watch_command PARAMS ((char *, int));
static int
-can_use_hardware_watchpoint PARAMS ((struct breakpoint *));
+can_use_hardware_watchpoint PARAMS ((struct value *));
static void
tbreak_command PARAMS ((char *, int));
remove_breakpoint PARAMS ((struct breakpoint *));
extern int addressprint; /* Print machine addresses? */
-extern int demangle; /* Print de-mangled symbol names? */
/* Are we executing breakpoint commands? */
static int executing_breakpoint_commands;
b? (tmp=b->next, 1): 0; \
b = tmp)
-/* By default no support for hardware watchpoints is assumed. */
-#ifndef TARGET_CAN_USE_HARDWARE_WATCHPOINT
-#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(B) 0
-#define target_remove_watchpoint(ADDR,LEN) -1
-#define target_insert_watchpoint(ADDR,LEN) -1
-#endif
+/* True if breakpoint hit counts should be displayed in breakpoint info. */
+
+int show_breakpoint_hit_counts = 1;
/* Chain of all breakpoints defined. */
-static struct breakpoint *breakpoint_chain;
+struct breakpoint *breakpoint_chain;
/* Number of last breakpoint made. */
static int breakpoint_count;
/* Set breakpoint count to NUM. */
+
static void
set_breakpoint_count (num)
int num;
value_from_longest (builtin_type_int, (LONGEST) num));
}
+/* Used in run_command to zero the hit count when a new run starts. */
+
+void
+clear_breakpoint_hit_counts ()
+{
+ struct breakpoint *b;
+
+ ALL_BREAKPOINTS (b)
+ b->hit_count = 0;
+}
+
/* Default address, symtab and line to put a breakpoint at
for "break" command with no arg.
if default_breakpoint_valid is zero, the other three are
if (*arg)
error ("Junk at end of expression");
}
+ breakpoints_changed ();
return;
}
{
if (b->type == bp_watchpoint
|| b->type == bp_hardware_watchpoint
+ || b->type == bp_read_watchpoint
+ || b->type == bp_access_watchpoint
|| !b->inserted)
continue;
else if (b->address + memory_breakpoint_size <= memaddr)
ALL_BREAKPOINTS (b)
if (b->type != bp_watchpoint
&& b->type != bp_hardware_watchpoint
+ && b->type != bp_read_watchpoint
+ && b->type != bp_access_watchpoint
&& b->enable != disabled
&& ! b->inserted
&& ! b->duplicate)
{
- val = target_insert_breakpoint(b->address, b->shadow_contents);
+ if (b->type == bp_hardware_breakpoint)
+ val = target_insert_hw_breakpoint(b->address, b->shadow_contents);
+ else
+ val = target_insert_breakpoint(b->address, b->shadow_contents);
if (val)
{
/* Can't set the breakpoint. */
else
b->inserted = 1;
}
- else if (b->type == bp_hardware_watchpoint
+ else if ((b->type == bp_hardware_watchpoint ||
+ b->type == bp_read_watchpoint ||
+ b->type == bp_access_watchpoint)
&& b->enable == enabled
&& ! b->inserted
&& ! b->duplicate)
{
- FRAME saved_frame;
+ struct frame_info *saved_frame;
int saved_level, within_current_scope;
value_ptr mark = value_mark ();
value_ptr v;
within_current_scope = 1;
else
{
- FRAME fr = find_frame_addr_in_frame_chain (b->watchpoint_frame);
- within_current_scope = (fr != NULL);
+ struct frame_info *fi =
+ find_frame_addr_in_frame_chain (b->watchpoint_frame);
+ within_current_scope = (fi != NULL);
if (within_current_scope)
- select_frame (fr, -1);
+ select_frame (fi, -1);
}
if (within_current_scope)
/* If it's a memory location, then we must watch it. */
if (v->lval == lval_memory)
{
- int addr, len;
+ int addr, len, type;
addr = VALUE_ADDRESS (v) + VALUE_OFFSET (v);
len = TYPE_LENGTH (VALUE_TYPE (v));
- val = target_insert_watchpoint (addr, len);
+ type = 0;
+ if (b->type == bp_read_watchpoint)
+ type = 1;
+ else if (b->type == bp_access_watchpoint)
+ type = 2;
+
+ val = target_insert_watchpoint (addr, len, type);
if (val == -1)
{
b->inserted = 0;
int val;
if (b->type != bp_watchpoint
- && b->type != bp_hardware_watchpoint)
+ && b->type != bp_hardware_watchpoint
+ && b->type != bp_read_watchpoint
+ && b->type != bp_access_watchpoint)
{
- val = target_remove_breakpoint(b->address, b->shadow_contents);
+ if (b->type == bp_hardware_breakpoint)
+ val = target_remove_hw_breakpoint(b->address, b->shadow_contents);
+ else
+ val = target_remove_breakpoint(b->address, b->shadow_contents);
if (val)
return val;
b->inserted = 0;
}
- else if (b->type == bp_hardware_watchpoint
+ else if ((b->type == bp_hardware_watchpoint ||
+ b->type == bp_read_watchpoint ||
+ b->type == bp_access_watchpoint)
&& b->enable == enabled
&& ! b->duplicate)
{
addr = VALUE_ADDRESS (v) + VALUE_OFFSET (v);
len = TYPE_LENGTH (VALUE_TYPE (v));
- val = target_remove_watchpoint (addr, len);
+ val = target_remove_watchpoint (addr, len, b->type);
if (val == -1)
b->inserted = 1;
val = 0;
}
/* Failure to remove any of the hardware watchpoints comes here. */
if (b->inserted)
- error ("Hardware watchpoint %d: Could not remove watchpoint\n",
- b->number);
+ warning ("Hardware watchpoint %d: Could not remove watchpoint\n",
+ b->number);
/* Free the saved value chain. We will construct a new one
the next time the watchpoint is inserted. */
delete_breakpoint (b);
/* Likewise for watchpoints on local expressions. */
- if ((b->type == bp_watchpoint || b->type == bp_hardware_watchpoint)
+ if ((b->type == bp_watchpoint || b->type == bp_hardware_watchpoint ||
+ b->type == bp_read_watchpoint || b->type == bp_access_watchpoint)
&& b->exp_valid_block != NULL)
delete_breakpoint (b);
}
int
frame_in_dummy (frame)
- FRAME frame;
+ struct frame_info *frame;
{
struct breakpoint *b;
{
bpstat bs;
struct cleanup *old_chain;
+ struct command_line *cmd;
executing_breakpoint_commands = 1;
old_chain = make_cleanup (cleanup_executing_breakpoints, 0);
breakpoint_proceeded = 0;
for (; bs != NULL; bs = bs->next)
{
- while (bs->commands)
+ cmd = bs->commands;
+ while (cmd != NULL)
{
- char *line = bs->commands->line;
- bs->commands = bs->commands->next;
- execute_command (line, 0);
- /* If the inferior is proceeded by the command, bomb out now.
- The bpstat chain has been blown away by wait_for_inferior.
- But since execution has stopped again, there is a new bpstat
- to look at, so start over. */
- if (breakpoint_proceeded)
- goto top;
+ execute_control_command (cmd);
+ cmd = cmd->next;
}
+ if (breakpoint_proceeded)
+ /* The inferior is proceeded by the command; bomb out now.
+ The bpstat chain has been blown away by wait_for_inferior.
+ But since execution has stopped again, there is a new bpstat
+ to look at, so start over. */
+ goto top;
+ else
+ bs->commands = NULL;
}
executing_breakpoint_commands = 0;
which has since been deleted. */
if (bs->breakpoint_at == NULL
|| (bs->breakpoint_at->type != bp_breakpoint
+ && bs->breakpoint_at->type != bp_hardware_breakpoint
&& bs->breakpoint_at->type != bp_watchpoint
+ && bs->breakpoint_at->type != bp_read_watchpoint
+ && bs->breakpoint_at->type != bp_access_watchpoint
&& bs->breakpoint_at->type != bp_hardware_watchpoint))
return 0;
- if (bs->breakpoint_at->type == bp_breakpoint)
+ if (bs->breakpoint_at->type == bp_breakpoint ||
+ bs->breakpoint_at->type == bp_hardware_breakpoint)
{
/* I think the user probably only wants to see one breakpoint
number, not all of them. */
printf_filtered ("\nBreakpoint %d, ", bs->breakpoint_at->number);
return 0;
}
-
- if (bs->old_val != NULL)
+ else if ((bs->old_val != NULL) &&
+ (bs->breakpoint_at->type == bp_watchpoint ||
+ bs->breakpoint_at->type == bp_access_watchpoint ||
+ bs->breakpoint_at->type == bp_hardware_watchpoint))
{
annotate_watchpoint (bs->breakpoint_at->number);
- printf_filtered ("\nWatchpoint %d, ", bs->breakpoint_at->number);
- print_expression (bs->breakpoint_at->exp, gdb_stdout);
+ mention (bs->breakpoint_at);
printf_filtered ("\nOld value = ");
value_print (bs->old_val, gdb_stdout, 0, Val_pretty_default);
printf_filtered ("\nNew value = ");
/* More than one watchpoint may have been triggered. */
return -1;
}
+ else if (bs->breakpoint_at->type == bp_access_watchpoint ||
+ bs->breakpoint_at->type == bp_read_watchpoint)
+ {
+ mention (bs->breakpoint_at);
+ printf_filtered ("\nValue = ");
+ value_print (bs->breakpoint_at->val, gdb_stdout, 0,
+ Val_pretty_default);
+ printf_filtered ("\n");
+ return -1;
+ }
/* We can't deal with it. Maybe another member of the bpstat chain can. */
return -1;
}
breakpoint_cond_eval (exp)
char *exp;
{
- return !value_true (evaluate_expression ((struct expression *)exp));
+ value_ptr mark = value_mark ();
+ int i = !value_true (evaluate_expression ((struct expression *)exp));
+ value_free_to_mark (mark);
+ return i;
}
/* Allocate a new bpstat and chain it to the current one. */
return bs;
}
\f
-
-
/* Possible return values for watchpoint_check (this can't be an enum
because of check_errors). */
/* The watchpoint has been deleted. */
/* The value has not changed. */
#define WP_VALUE_NOT_CHANGED 3
+#define BP_TEMPFLAG 1
+#define BP_HARDWAREFLAG 2
+
/* Check watchpoint condition. */
+
static int
watchpoint_check (p)
char *p;
{
bpstat bs = (bpstat) p;
- FRAME saved_frame, fr;
- int within_current_scope, saved_level;
+ struct breakpoint *b;
+ struct frame_info *fr;
+ int within_current_scope;
- /* Save the current frame and level so we can restore it after
- evaluating the watchpoint expression on its own frame. */
- saved_frame = selected_frame;
- saved_level = selected_frame_level;
+ b = bs->breakpoint_at;
- if (bs->breakpoint_at->exp_valid_block == NULL)
+ if (b->exp_valid_block == NULL)
within_current_scope = 1;
else
{
- fr = find_frame_addr_in_frame_chain (bs->breakpoint_at->watchpoint_frame);
+ /* There is no current frame at this moment. If we're going to have
+ any chance of handling watchpoints on local variables, we'll need
+ the frame chain (so we can determine if we're in scope). */
+ reinit_frame_cache();
+ fr = find_frame_addr_in_frame_chain (b->watchpoint_frame);
within_current_scope = (fr != NULL);
if (within_current_scope)
/* If we end up stopping, the current frame will get selected
value_ptr mark = value_mark ();
value_ptr new_val = evaluate_expression (bs->breakpoint_at->exp);
- if (!value_equal (bs->breakpoint_at->val, new_val))
+ if (!value_equal (b->val, new_val))
{
release_value (new_val);
value_free_to_mark (mark);
- bs->old_val = bs->breakpoint_at->val;
- bs->breakpoint_at->val = new_val;
+ bs->old_val = b->val;
+ b->val = new_val;
/* We will stop here */
- select_frame (saved_frame, saved_level);
return WP_VALUE_CHANGED;
}
else
/* Nothing changed, don't do anything. */
value_free_to_mark (mark);
/* We won't stop here */
- select_frame (saved_frame, saved_level);
return WP_VALUE_NOT_CHANGED;
}
}
printf_filtered ("\
Watchpoint %d deleted because the program has left the block in\n\
which its expression is valid.\n", bs->breakpoint_at->number);
- if (bs->breakpoint_at->related_breakpoint)
- delete_breakpoint (bs->breakpoint_at->related_breakpoint);
- delete_breakpoint (bs->breakpoint_at);
+ if (b->related_breakpoint)
+ delete_breakpoint (b->related_breakpoint);
+ delete_breakpoint (b);
- select_frame (saved_frame, saved_level);
return WP_DELETED;
}
}
}
/* Get a bpstat associated with having just stopped at address *PC
- and frame address FRAME_ADDRESS. Update *PC to point at the
+ and frame address CORE_ADDRESS. Update *PC to point at the
breakpoint (if we hit a breakpoint). NOT_A_BREAKPOINT is nonzero
if this is known to not be a real breakpoint (it could still be a
watchpoint, though). */
*/
bpstat
-bpstat_stop_status (pc, frame_address, not_a_breakpoint)
+bpstat_stop_status (pc, not_a_breakpoint)
CORE_ADDR *pc;
- FRAME_ADDR frame_address;
int not_a_breakpoint;
{
register struct breakpoint *b;
int real_breakpoint = 0;
#endif
/* Root of the chain of bpstat's */
- struct bpstat root_bs[1];
+ struct bpstats root_bs[1];
/* Pointer to the last thing in the chain currently. */
bpstat bs = root_bs;
+ static char message1[] =
+ "Error evaluating expression for watchpoint %d\n";
+ char message[sizeof (message1) + 30 /* slop */];
/* Get the address where the breakpoint would have been. */
bp_addr = *pc - DECR_PC_AFTER_BREAK;
if (b->type != bp_watchpoint
&& b->type != bp_hardware_watchpoint
+ && b->type != bp_read_watchpoint
+ && b->type != bp_access_watchpoint
+ && b->type != bp_hardware_breakpoint
&& b->address != bp_addr)
continue;
+ if (b->type == bp_hardware_breakpoint
+ && b->address != (bp_addr - DECR_PC_AFTER_HW_BREAK))
+ continue;
+
if (b->type != bp_watchpoint
&& b->type != bp_hardware_watchpoint
+ && b->type != bp_read_watchpoint
+ && b->type != bp_access_watchpoint
&& not_a_breakpoint)
continue;
/* Come here if it's a watchpoint, or if the break address matches */
+ ++(b->hit_count);
+
bs = bpstat_alloc (b, bs); /* Alloc a bpstat to explain stop */
bs->stop = 1;
bs->print = 1;
+ sprintf (message, message1, b->number);
if (b->type == bp_watchpoint || b->type == bp_hardware_watchpoint)
{
- static char message1[] =
- "Error evaluating expression for watchpoint %d\n";
- char message[sizeof (message1) + 30 /* slop */];
- sprintf (message, message1, b->number);
switch (catch_errors (watchpoint_check, (char *) bs, message,
RETURN_MASK_ALL))
{
break;
}
}
+ else if (b->type == bp_read_watchpoint || b->type == bp_access_watchpoint)
+ {
+ CORE_ADDR addr;
+ value_ptr v;
+ int found = 0;
+
+ addr = target_stopped_data_address();
+ if (addr == 0) continue;
+ for (v = b->val_chain; v; v = v->next)
+ {
+ if (v->lval == lval_memory)
+ {
+ CORE_ADDR vaddr;
+
+ vaddr = VALUE_ADDRESS (v) + VALUE_OFFSET (v);
+ if (addr == vaddr)
+ found = 1;
+ }
+ }
+ if (found)
+ switch (catch_errors (watchpoint_check, (char *) bs, message,
+ RETURN_MASK_ALL))
+ {
+ case WP_DELETED:
+ /* We've already printed what needs to be printed. */
+ bs->print_it = print_it_done;
+ /* Stop. */
+ break;
+ case WP_VALUE_CHANGED:
+ case WP_VALUE_NOT_CHANGED:
+ /* Stop. */
+ break;
+ default:
+ /* Can't happen. */
+ case 0:
+ /* Error from catch_errors. */
+ printf_filtered ("Watchpoint %d deleted.\n", b->number);
+ if (b->related_breakpoint)
+ delete_breakpoint (b->related_breakpoint);
+ delete_breakpoint (b);
+ /* We've already printed what needs to be printed. */
+ bs->print_it = print_it_done;
+ break;
+ }
+ }
#if DECR_PC_AFTER_BREAK != 0 || defined (SHIFT_INST_REGS)
else
real_breakpoint = 1;
#endif
- if (b->frame && b->frame != frame_address)
+ if (b->frame && b->frame != (get_current_frame ())->frame)
bs->stop = 0;
else
{
/* The value of a hardware watchpoint hasn't changed, but the
intermediate memory locations we are watching may have. */
- if (bs && ! bs->stop
- && bs->breakpoint_at->type == bp_hardware_watchpoint)
+ if (bs && ! bs->stop &&
+ (bs->breakpoint_at->type == bp_hardware_watchpoint ||
+ bs->breakpoint_at->type == bp_read_watchpoint ||
+ bs->breakpoint_at->type == bp_access_watchpoint))
{
remove_breakpoints ();
insert_breakpoints ();
/* We hit the through_sigtramp breakpoint. */
through_sig,
+ /* We hit the shared library event breakpoint. */
+ shlib_event,
+
/* This is just used to count how many enums there are. */
class_last
};
/* Here is the table which drives this routine. So that we can
format it pretty, we define some abbreviations for the
enum bpstat_what codes. */
-#define keep_c BPSTAT_WHAT_KEEP_CHECKING
-#define stop_s BPSTAT_WHAT_STOP_SILENT
-#define stop_n BPSTAT_WHAT_STOP_NOISY
-#define single BPSTAT_WHAT_SINGLE
-#define setlr BPSTAT_WHAT_SET_LONGJMP_RESUME
-#define clrlr BPSTAT_WHAT_CLEAR_LONGJMP_RESUME
-#define clrlrs BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE
+#define kc BPSTAT_WHAT_KEEP_CHECKING
+#define ss BPSTAT_WHAT_STOP_SILENT
+#define sn BPSTAT_WHAT_STOP_NOISY
+#define sgl BPSTAT_WHAT_SINGLE
+#define slr BPSTAT_WHAT_SET_LONGJMP_RESUME
+#define clr BPSTAT_WHAT_CLEAR_LONGJMP_RESUME
+#define clrs BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE
#define sr BPSTAT_WHAT_STEP_RESUME
#define ts BPSTAT_WHAT_THROUGH_SIGTRAMP
+#define shl BPSTAT_WHAT_CHECK_SHLIBS
/* "Can't happen." Might want to print an error message.
abort() is not out of the question, but chances are GDB is just
table[(int)class_last][(int)BPSTAT_WHAT_LAST] =
{
/* old action */
- /* keep_c stop_s stop_n single setlr clrlr clrlrs sr ts
+ /* kc ss sn sgl slr clr clrs sr ts shl
*/
-/*no_effect*/ {keep_c,stop_s,stop_n,single, setlr , clrlr , clrlrs, sr, ts},
-/*wp_silent*/ {stop_s,stop_s,stop_n,stop_s, stop_s, stop_s, stop_s, sr, ts},
-/*wp_noisy*/ {stop_n,stop_n,stop_n,stop_n, stop_n, stop_n, stop_n, sr, ts},
-/*bp_nostop*/ {single,stop_s,stop_n,single, setlr , clrlrs, clrlrs, sr, ts},
-/*bp_silent*/ {stop_s,stop_s,stop_n,stop_s, stop_s, stop_s, stop_s, sr, ts},
-/*bp_noisy*/ {stop_n,stop_n,stop_n,stop_n, stop_n, stop_n, stop_n, sr, ts},
-/*long_jump*/ {setlr ,stop_s,stop_n,setlr , err , err , err , sr, ts},
-/*long_resume*/ {clrlr ,stop_s,stop_n,clrlrs, err , err , err , sr, ts},
-/*step_resume*/ {sr ,sr ,sr ,sr , sr , sr , sr , sr, ts},
-/*through_sig*/ {ts ,ts ,ts ,ts , ts , ts , ts , ts, ts}
+/*no_effect*/ {kc, ss, sn, sgl, slr, clr, clrs, sr, ts, shl},
+/*wp_silent*/ {ss, ss, sn, ss, ss, ss, ss, sr, ts, shl},
+/*wp_noisy*/ {sn, sn, sn, sn, sn, sn, sn, sr, ts, shl},
+/*bp_nostop*/ {sgl, ss, sn, sgl, slr, clrs, clrs, sr, ts, shl},
+/*bp_silent*/ {ss, ss, sn, ss, ss, ss, ss, sr, ts, shl},
+/*bp_noisy*/ {sn, sn, sn, sn, sn, sn, sn, sr, ts, shl},
+/*long_jump*/ {slr, ss, sn, slr, err, err, err, sr, ts, shl},
+/*long_resume*/ {clr, ss, sn, clrs, err, err, err, sr, ts, shl},
+/*step_resume*/ {sr, sr, sr, sr, sr, sr, sr, sr, ts, shl},
+/*through_sig*/ {ts, ts, ts, ts, ts, ts, ts, ts, ts, shl},
+/*shlib*/ {shl, shl, shl, shl, shl, shl, shl, shl, ts, shl}
};
-#undef keep_c
-#undef stop_s
-#undef stop_n
-#undef single
-#undef setlr
-#undef clrlr
-#undef clrlrs
+#undef kc
+#undef ss
+#undef sn
+#undef sgl
+#undef slr
+#undef clr
+#undef clrs
#undef err
#undef sr
#undef ts
+#undef shl
enum bpstat_what_main_action current_action = BPSTAT_WHAT_KEEP_CHECKING;
struct bpstat_what retval;
switch (bs->breakpoint_at->type)
{
case bp_breakpoint:
+ case bp_hardware_breakpoint:
case bp_until:
case bp_finish:
if (bs->stop)
break;
case bp_watchpoint:
case bp_hardware_watchpoint:
+ case bp_read_watchpoint:
+ case bp_access_watchpoint:
if (bs->stop)
{
if (bs->print)
case bp_watchpoint_scope:
bs_class = bp_nostop;
break;
-
+ case bp_shlib_event:
+ bs_class = shlib_event;
+ break;
case bp_call_dummy:
/* Make sure the action is stop (silent or noisy), so infrun.c
pops the dummy frame. */
register struct symbol *sym;
CORE_ADDR last_addr = (CORE_ADDR)-1;
int found_a_breakpoint = 0;
- static char *bptypes[] = {"breakpoint", "until", "finish", "watchpoint",
- "hardware watchpoint", "longjmp",
+ static char *bptypes[] = {"breakpoint", "hw breakpoint",
+ "until", "finish", "watchpoint",
+ "hw watchpoint", "read watchpoint",
+ "acc watchpoint", "longjmp",
"longjmp resume", "step resume",
- "watchpoint scope", "call dummy" };
+ "sigtramp",
+ "watchpoint scope", "call dummy",
+ "shlib events" };
static char *bpdisps[] = {"del", "dis", "keep"};
static char bpenables[] = "ny";
char wrap_indent[80];
/* We only print out user settable breakpoints unless the allflag is set. */
if (!allflag
&& b->type != bp_breakpoint
+ && b->type != bp_hardware_breakpoint
&& b->type != bp_watchpoint
+ && b->type != bp_read_watchpoint
+ && b->type != bp_access_watchpoint
&& b->type != bp_hardware_watchpoint)
continue;
if (!found_a_breakpoint++)
{
- annotate_field (0);
- printf_filtered ("Num ");
- annotate_field (1);
- printf_filtered ("Type ");
- annotate_field (2);
- printf_filtered ("Disp ");
- annotate_field (3);
- printf_filtered ("Enb ");
- if (addressprint)
- {
- annotate_field (4);
- printf_filtered ("Address ");
- }
- annotate_field (5);
- printf_filtered ("What\n");
-
- annotate_breakpoints_table ();
- }
-
- annotate_record ();
- annotate_field (0);
- printf_filtered ("%-3d ", b->number);
- annotate_field (1);
- printf_filtered ("%-14s ", bptypes[(int)b->type]);
- annotate_field (2);
- printf_filtered ("%-4s ", bpdisps[(int)b->disposition]);
- annotate_field (3);
+ annotate_breakpoints_headers ();
+
+ annotate_field (0);
+ printf_filtered ("Num ");
+ annotate_field (1);
+ printf_filtered ("Type ");
+ annotate_field (2);
+ printf_filtered ("Disp ");
+ annotate_field (3);
+ printf_filtered ("Enb ");
+ if (addressprint)
+ {
+ annotate_field (4);
+ printf_filtered ("Address ");
+ }
+ annotate_field (5);
+ printf_filtered ("What\n");
+
+ annotate_breakpoints_table ();
+ }
+
+ annotate_record ();
+ annotate_field (0);
+ printf_filtered ("%-3d ", b->number);
+ annotate_field (1);
+ printf_filtered ("%-14s ", bptypes[(int)b->type]);
+ annotate_field (2);
+ printf_filtered ("%-4s ", bpdisps[(int)b->disposition]);
+ annotate_field (3);
printf_filtered ("%-3c ", bpenables[(int)b->enable]);
strcpy (wrap_indent, " ");
{
case bp_watchpoint:
case bp_hardware_watchpoint:
+ case bp_read_watchpoint:
+ case bp_access_watchpoint:
/* Field 4, the address, is omitted (which makes the columns
not line up too nicely with the headers, but the effect
is relatively readable). */
break;
case bp_breakpoint:
+ case bp_hardware_breakpoint:
case bp_until:
case bp_finish:
case bp_longjmp:
case bp_through_sigtramp:
case bp_watchpoint_scope:
case bp_call_dummy:
+ case bp_shlib_event:
if (addressprint)
{
- annotate_field (4);
+ annotate_field (4);
/* FIXME-32x64: need a print_address_numeric with
field width */
printf_filtered
if (b->frame)
{
- annotate_field (6);
+ annotate_field (6);
printf_filtered ("\tstop only in stack frame at ");
print_address_numeric (b->frame, 1, gdb_stdout);
if (b->cond)
{
- annotate_field (7);
+ annotate_field (7);
printf_filtered ("\tstop only if ");
print_expression (b->cond, gdb_stdout);
printf_filtered ("\n");
}
+ if (show_breakpoint_hit_counts && b->hit_count)
+ {
+ /* FIXME should make an annotation for this */
+
+ printf_filtered ("\tbreakpoint already hit %d time%s\n",
+ b->hit_count, (b->hit_count == 1 ? "" : "s"));
+ }
+
if (b->ignore_count)
{
- annotate_field (8);
+ annotate_field (8);
printf_filtered ("\tignore next %d hits\n", b->ignore_count);
}
if ((l = b->commands))
{
- annotate_field (9);
+ annotate_field (9);
while (l)
{
- fputs_filtered ("\t", gdb_stdout);
- fputs_filtered (l->line, gdb_stdout);
- fputs_filtered ("\n", gdb_stdout);
+ print_command_line (l, 4);
l = l->next;
}
}
else
b->source_file = savestring (sal.symtab->filename,
strlen (sal.symtab->filename));
+ b->language = current_language->la_language;
+ b->input_radix = input_radix;
b->thread = -1;
b->line_number = sal.line;
b->enable = enabled;
return b;
}
+static int internal_breakpoint_number = -1;
+
static void
-create_longjmp_breakpoint(func_name)
+create_longjmp_breakpoint (func_name)
char *func_name;
{
struct symtab_and_line sal;
struct breakpoint *b;
- static int internal_breakpoint_number = -1;
if (func_name != NULL)
{
struct minimal_symbol *m;
- m = lookup_minimal_symbol(func_name, (struct objfile *)NULL);
+ m = lookup_minimal_symbol_text (func_name, NULL, (struct objfile *)NULL);
if (m)
sal.pc = SYMBOL_VALUE_ADDRESS (m);
else
sal.symtab = NULL;
sal.line = 0;
- b = set_raw_breakpoint(sal);
+ b = set_raw_breakpoint (sal);
if (!b) return;
b->type = func_name != NULL ? bp_longjmp : bp_longjmp_resume;
}
}
+#ifdef SOLIB_ADD
+void
+remove_solib_event_breakpoints ()
+{
+ register struct breakpoint *b;
+
+ ALL_BREAKPOINTS (b)
+ if (b->type == bp_shlib_event)
+ delete_breakpoint (b);
+}
+
+void
+create_solib_event_breakpoint (address)
+ CORE_ADDR address;
+{
+ struct breakpoint *b;
+ struct symtab_and_line sal;
+
+ sal.pc = address;
+ sal.symtab = NULL;
+ sal.line = 0;
+ b = set_raw_breakpoint (sal);
+ b->number = internal_breakpoint_number--;
+ b->disposition = donttouch;
+ b->type = bp_shlib_event;
+}
+#endif
+
+int
+hw_breakpoint_used_count()
+{
+ register struct breakpoint *b;
+ int i = 0;
+
+ ALL_BREAKPOINTS (b)
+ {
+ if (b->type == bp_hardware_breakpoint && b->enable == enabled)
+ i++;
+ }
+
+ return i;
+}
+
+int
+hw_watchpoint_used_count(type, other_type_used)
+ enum bptype type;
+ int *other_type_used;
+{
+ register struct breakpoint *b;
+ int i = 0;
+
+ *other_type_used = 0;
+ ALL_BREAKPOINTS (b)
+ {
+ if (b->enable == enabled)
+ {
+ if (b->type == type) i++;
+ else if ((b->type == bp_hardware_watchpoint ||
+ b->type == bp_read_watchpoint ||
+ b->type == bp_access_watchpoint)
+ && b->enable == enabled)
+ *other_type_used = 1;
+ }
+ }
+ return i;
+}
+
/* Call this after hitting the longjmp() breakpoint. Use this to set a new
breakpoint at the target of the jmp_buf.
void
set_longjmp_resume_breakpoint(pc, frame)
CORE_ADDR pc;
- FRAME frame;
+ struct frame_info *frame;
{
register struct breakpoint *b;
b->address = pc;
b->enable = enabled;
if (frame != NULL)
- b->frame = FRAME_FP(frame);
+ b->frame = frame->frame;
else
b->frame = 0;
check_duplicates (b->address);
struct breakpoint *
set_momentary_breakpoint (sal, frame, type)
struct symtab_and_line sal;
- FRAME frame;
+ struct frame_info *frame;
enum bptype type;
{
register struct breakpoint *b;
b->type = type;
b->enable = enabled;
b->disposition = donttouch;
- b->frame = (frame ? FRAME_FP (frame) : 0);
+ b->frame = (frame ? frame->frame : 0);
+
+ /* If we're debugging a multi-threaded program, then we
+ want momentary breakpoints to be active in only a
+ single thread of control. */
+ if (in_thread_list (inferior_pid))
+ b->thread = pid_to_thread_id (inferior_pid);
+
return b;
}
#endif
\f
/* Tell the user we have just set a breakpoint B. */
+
static void
mention (b)
struct breakpoint *b;
{
+ int say_where = 0;
+
+ /* FIXME: This is misplaced; mention() is called by things (like hitting a
+ watchpoint) other than breakpoint creation. It should be possible to
+ clean this up and at the same time replace the random calls to
+ breakpoint_changed with this hook, as has already been done for
+ delete_breakpoint_hook and so on. */
+ if (create_breakpoint_hook)
+ create_breakpoint_hook (b);
+
switch (b->type)
{
case bp_watchpoint:
printf_filtered ("Hardware watchpoint %d: ", b->number);
print_expression (b->exp, gdb_stdout);
break;
+ case bp_read_watchpoint:
+ printf_filtered ("Hardware read watchpoint %d: ", b->number);
+ print_expression (b->exp, gdb_stdout);
+ break;
+ case bp_access_watchpoint:
+ printf_filtered ("Hardware access(read/write) watchpoint %d: ",b->number);
+ print_expression (b->exp, gdb_stdout);
+ break;
case bp_breakpoint:
- printf_filtered ("Breakpoint %d at ", b->number);
- print_address_numeric (b->address, 1, gdb_stdout);
- if (b->source_file)
- printf_filtered (": file %s, line %d.",
- b->source_file, b->line_number);
+ printf_filtered ("Breakpoint %d", b->number);
+ say_where = 1;
+ break;
+ case bp_hardware_breakpoint:
+ printf_filtered ("Hardware assisted breakpoint %d", b->number);
+ say_where = 1;
break;
case bp_until:
case bp_finish:
case bp_watchpoint_scope:
break;
}
+ if (say_where)
+ {
+ if (addressprint || b->source_file == NULL)
+ {
+ printf_filtered (" at ");
+ print_address_numeric (b->address, 1, gdb_stdout);
+ }
+ if (b->source_file)
+ printf_filtered (": file %s, line %d.",
+ b->source_file, b->line_number);
+ }
printf_filtered ("\n");
}
#endif /* 0 */
\f
/* Set a breakpoint according to ARG (function, linenum or *address)
- and make it temporary if TEMPFLAG is nonzero. */
+ flag: first bit : 0 non-temporary, 1 temporary.
+ second bit : 0 normal breakpoint, 1 hardware breakpoint. */
static void
-break_command_1 (arg, tempflag, from_tty)
+break_command_1 (arg, flag, from_tty)
char *arg;
- int tempflag, from_tty;
+ int flag, from_tty;
{
+ int tempflag, hardwareflag;
struct symtabs_and_lines sals;
struct symtab_and_line sal;
register struct expression *cond = 0;
int i;
int thread;
+ hardwareflag = flag & BP_HARDWAREFLAG;
+ tempflag = flag & BP_TEMPFLAG;
+
sals.sals = NULL;
sals.nelts = 0;
error ("Junk at end of arguments.");
}
}
+ if (hardwareflag)
+ {
+ int i, target_resources_ok;
+
+ i = hw_breakpoint_used_count ();
+ target_resources_ok = TARGET_CAN_USE_HARDWARE_WATCHPOINT (
+ bp_hardware_breakpoint, i + sals.nelts, 0);
+ if (target_resources_ok == 0)
+ error ("No hardware breakpoint support in the target.");
+ else if (target_resources_ok < 0)
+ error ("Hardware breakpoints used exceeds limit.");
+ }
/* Remove the canonical strings from the cleanup, they are needed below. */
if (canonical != (char **)NULL)
b = set_raw_breakpoint (sal);
set_breakpoint_count (breakpoint_count + 1);
b->number = breakpoint_count;
- b->type = bp_breakpoint;
+ b->type = hardwareflag ? bp_hardware_breakpoint : bp_breakpoint;
b->cond = cond;
b->thread = thread;
b->cond_string = savestring (cond_start, cond_end - cond_start);
b->enable = enabled;
- b->disposition = tempflag ? delete : donttouch;
+ b->disposition = tempflag ? del : donttouch;
mention (b);
}
char *arg;
int from_tty;
{
- break_command_1 (arg, 1, from_tty);
+ break_command_1 (arg, BP_TEMPFLAG, from_tty);
+}
+
+static void
+hbreak_command (arg, from_tty)
+ char *arg;
+ int from_tty;
+{
+ break_command_1 (arg, BP_HARDWAREFLAG, from_tty);
+}
+
+static void
+thbreak_command (arg, from_tty)
+ char *arg;
+ int from_tty;
+{
+ break_command_1 (arg, (BP_TEMPFLAG | BP_HARDWAREFLAG), from_tty);
}
/* ARGSUSED */
+/* accessflag: 0: watch write, 1: watch read, 2: watch access(read or write)
+*/
static void
-watch_command (arg, from_tty)
+watch_command_1 (arg, accessflag, from_tty)
char *arg;
+ int accessflag;
int from_tty;
{
struct breakpoint *b;
struct symtab_and_line sal;
struct expression *exp;
struct block *exp_valid_block;
- struct value *val;
- FRAME frame, prev_frame;
+ struct value *val, *mark;
+ struct frame_info *frame, *prev_frame;
+ char *exp_start = NULL;
+ char *exp_end = NULL;
+ char *tok, *end_tok;
+ int toklen;
+ char *cond_start = NULL;
+ char *cond_end = NULL;
+ struct expression *cond = NULL;
+ int i, other_type_used, target_resources_ok;
+ enum bptype bp_type;
+ int mem_cnt = 0;
sal.pc = 0;
sal.symtab = NULL;
/* Parse arguments. */
innermost_block = NULL;
- exp = parse_expression (arg);
+ exp_start = arg;
+ exp = parse_exp_1 (&arg, 0, 0);
+ exp_end = arg;
exp_valid_block = innermost_block;
+ mark = value_mark ();
val = evaluate_expression (exp);
release_value (val);
if (VALUE_LAZY (val))
value_fetch_lazy (val);
+ tok = arg;
+ while (*tok == ' ' || *tok == '\t')
+ tok++;
+ end_tok = tok;
+
+ while (*end_tok != ' ' && *end_tok != '\t' && *end_tok != '\000')
+ end_tok++;
+
+ toklen = end_tok - tok;
+ if (toklen >= 1 && strncmp (tok, "if", toklen) == 0)
+ {
+ tok = cond_start = end_tok + 1;
+ cond = parse_exp_1 (&tok, 0, 0);
+ cond_end = tok;
+ }
+ if (*tok)
+ error("Junk at end of command.");
+
+ if (accessflag == 1) bp_type = bp_read_watchpoint;
+ else if (accessflag == 2) bp_type = bp_access_watchpoint;
+ else bp_type = bp_hardware_watchpoint;
+
+ mem_cnt = can_use_hardware_watchpoint (val);
+ if (mem_cnt == 0 && bp_type != bp_hardware_watchpoint)
+ error ("Expression cannot be implemented with read/access watchpoint.");
+ if (mem_cnt != 0) {
+ i = hw_watchpoint_used_count (bp_type, &other_type_used);
+ target_resources_ok = TARGET_CAN_USE_HARDWARE_WATCHPOINT(
+ bp_type, i + mem_cnt, other_type_used);
+ if (target_resources_ok == 0 && bp_type != bp_hardware_watchpoint)
+ error ("Target does not have this type of hardware watchpoint support.");
+ if (target_resources_ok < 0 && bp_type != bp_hardware_watchpoint)
+ error ("Target resources have been allocated for other types of watchpoints.");
+ }
+
/* Now set up the breakpoint. */
b = set_raw_breakpoint (sal);
set_breakpoint_count (breakpoint_count + 1);
b->disposition = donttouch;
b->exp = exp;
b->exp_valid_block = exp_valid_block;
+ b->exp_string = savestring (exp_start, exp_end - exp_start);
b->val = val;
- b->cond = 0;
- b->cond_string = NULL;
- b->exp_string = savestring (arg, strlen (arg));
-
+ b->cond = cond;
+ if (cond_start)
+ b->cond_string = savestring (cond_start, cond_end - cond_start);
+ else
+ b->cond_string = 0;
+
frame = block_innermost_frame (exp_valid_block);
if (frame)
{
prev_frame = get_prev_frame (frame);
- b->watchpoint_frame = FRAME_FP (frame);
+ b->watchpoint_frame = frame->frame;
}
else
b->watchpoint_frame = (CORE_ADDR)0;
- if (can_use_hardware_watchpoint (b))
- b->type = bp_hardware_watchpoint;
+ if (mem_cnt && target_resources_ok > 0)
+ b->type = bp_type;
else
b->type = bp_watchpoint;
scope_breakpoint->enable = enabled;
/* Automatically delete the breakpoint when it hits. */
- scope_breakpoint->disposition = delete;
+ scope_breakpoint->disposition = del;
/* Only break in the proper frame (help with recursion). */
scope_breakpoint->frame = prev_frame->frame;
b->related_breakpoint = scope_breakpoint;
}
}
-
+ value_free_to_mark (mark);
mention (b);
}
-/* Return nonzero if the watchpoint described by B can be handled
- completely in hardware. If the watchpoint can not be handled
+/* Return count of locations need to be watched and can be handled
+ in hardware. If the watchpoint can not be handled
in hardware return zero. */
static int
-can_use_hardware_watchpoint (b)
- struct breakpoint *b;
+can_use_hardware_watchpoint (v)
+ struct value *v;
{
- value_ptr mark = value_mark ();
- value_ptr v = evaluate_expression (b->exp);
- int found_memory = 0;
+ int found_memory_cnt = 0;
/* Make sure all the intermediate values are in memory. Also make sure
we found at least one memory expression. Guards against watch 0x12345,
which is meaningless, but could cause errors if one tries to insert a
hardware watchpoint for the constant expression. */
- for ( ; v != mark; v = v->next)
+ for ( ; v; v = v->next)
{
- if (!(v->lval == lval_memory)
- || v->lval == not_lval
- || (v->lval != not_lval
- && v->modifiable == 0))
+ if (v->lval == lval_memory)
+ {
+ if (TYPE_LENGTH (VALUE_TYPE (v)) <= REGISTER_SIZE)
+ found_memory_cnt++;
+ }
+ else if (v->lval != not_lval && v->modifiable == 0)
return 0;
- else
- if (v->lval == lval_memory)
- found_memory = 1;
}
/* The expression itself looks suitable for using a hardware
watchpoint, but give the target machine a chance to reject it. */
- return found_memory && TARGET_CAN_USE_HARDWARE_WATCHPOINT (b);
+ return found_memory_cnt;
+}
+
+static void watch_command (arg, from_tty)
+ char *arg;
+ int from_tty;
+{
+ watch_command_1 (arg, 0, from_tty);
+}
+
+static void rwatch_command (arg, from_tty)
+ char *arg;
+ int from_tty;
+{
+ watch_command_1 (arg, 1, from_tty);
+}
+
+static void awatch_command (arg, from_tty)
+ char *arg;
+ int from_tty;
+{
+ watch_command_1 (arg, 2, from_tty);
}
\f
-/*
- * Helper routine for the until_command routine in infcmd.c. Here
- * because it uses the mechanisms of breakpoints.
- */
+/* Helper routine for the until_command routine in infcmd.c. Here
+ because it uses the mechanisms of breakpoints. */
+
/* ARGSUSED */
void
until_break_command (arg, from_tty)
{
struct symtabs_and_lines sals;
struct symtab_and_line sal;
- FRAME prev_frame = get_prev_frame (selected_frame);
+ struct frame_info *prev_frame = get_prev_frame (selected_frame);
struct breakpoint *breakpoint;
struct cleanup *old_chain;
if (prev_frame)
{
- struct frame_info *fi;
-
- fi = get_frame_info (prev_frame);
- sal = find_pc_line (fi->pc, 0);
- sal.pc = fi->pc;
+ sal = find_pc_line (prev_frame->pc, 0);
+ sal.pc = prev_frame->pc;
breakpoint = set_momentary_breakpoint (sal, prev_frame, bp_until);
make_cleanup(delete_breakpoint, breakpoint);
}
register struct blockvector *bl;
register struct block *block;
int index, have_default = 0;
- struct frame_info *fi;
CORE_ADDR pc;
struct symtabs_and_lines sals;
struct sal_chain *sal_chain = 0;
if (selected_frame == NULL)
error ("No selected frame.");
block = get_frame_block (selected_frame);
- fi = get_frame_info (selected_frame);
- pc = fi->pc;
+ pc = selected_frame->pc;
sals.nelts = 0;
sals.sals = NULL;
b->type = bp_breakpoint;
b->cond = cond;
b->enable = enabled;
- b->disposition = tempflag ? delete : donttouch;
+ b->disposition = tempflag ? del : donttouch;
mention (b);
}
free ((PTR)sals.sals);
}
+/* Used by the gui, could be made a worker for other things. */
+
+struct breakpoint *
+set_breakpoint_sal (sal)
+struct symtab_and_line sal;
+{
+ struct breakpoint *b;
+ b = set_raw_breakpoint (sal);
+ set_breakpoint_count (breakpoint_count + 1);
+ b->number = breakpoint_count;
+ b->type = bp_breakpoint;
+ b->cond = 0;
+ b->thread = -1;
+ return b;
+}
+
#if 0
/* These aren't used; I don't know what they were for. */
/* Disable breakpoints on all catch clauses described in ARGS. */
while (b->next
&& b->next->type != bp_watchpoint
&& b->next->type != bp_hardware_watchpoint
+ && b->next->type != bp_read_watchpoint
+ && b->next->type != bp_access_watchpoint
&& (sal.pc
? b->next->address == sal.pc
: (b->next->source_file != NULL
bpstat bs;
{
for (; bs; bs = bs->next)
- if (bs->breakpoint_at && bs->breakpoint_at->disposition == delete
+ if (bs->breakpoint_at && bs->breakpoint_at->disposition == del
&& bs->stop)
delete_breakpoint (bs->breakpoint_at);
}
register struct breakpoint *b;
register bpstat bs;
+ if (delete_breakpoint_hook)
+ delete_breakpoint_hook (bpt);
+
if (bpt->inserted)
remove_breakpoint (bpt);
/* If this breakpoint was inserted, and there is another breakpoint
at the same address, we need to insert the other breakpoint. */
if (bpt->inserted
- && bpt->type != bp_hardware_watchpoint)
+ && bpt->type != bp_hardware_watchpoint
+ && bpt->type != bp_read_watchpoint
+ && bpt->type != bp_access_watchpoint)
{
ALL_BREAKPOINTS (b)
if (b->address == bpt->address
if (bpt->source_file != NULL)
free (bpt->source_file);
- breakpoints_changed ();
-
/* Be sure no bpstat's are pointing at it after it's been freed. */
/* FIXME, how can we find all bpstat's?
We just check stop_bpstat for now. */
{
/* Ask user only if there are some breakpoints to delete. */
if (!from_tty
- || (breakpoint_chain && query ("Delete all breakpoints? ", 0, 0)))
+ || (breakpoint_chain && query ("Delete all breakpoints? ")))
{
/* No arg; clear all breakpoints. */
while (breakpoint_chain)
char *bint;
{
struct breakpoint *b = (struct breakpoint *)bint; /* get past catch_errs */
+ struct value *mark;
int i;
struct symtabs_and_lines sals;
char *s;
switch (b->type)
{
case bp_breakpoint:
+ case bp_hardware_breakpoint:
if (b->addr_string == NULL)
{
/* Anything without a string can't be re-set. */
save_enable = b->enable;
b->enable = disabled;
+ set_language (b->language);
+ input_radix = b->input_radix;
s = b->addr_string;
sals = decode_line_1 (&s, 1, (struct symtab *)NULL, 0, (char ***)NULL);
for (i = 0; i < sals.nelts; i++)
case bp_watchpoint:
case bp_hardware_watchpoint:
+ case bp_read_watchpoint:
+ case bp_access_watchpoint:
innermost_block = NULL;
/* The issue arises of what context to evaluate this in. The same
one as when it was set, but what does that mean when symbols have
/* So for now, just use a global context. */
b->exp = parse_expression (b->exp_string);
b->exp_valid_block = innermost_block;
+ mark = value_mark ();
b->val = evaluate_expression (b->exp);
release_value (b->val);
if (VALUE_LAZY (b->val))
}
if (b->enable == enabled)
mention (b);
+ value_free_to_mark (mark);
break;
default:
case bp_call_dummy:
delete_breakpoint (b);
break;
+
+ /* This breakpoint is special, it's set up when the inferior
+ starts and we really don't want to touch it. */
+ case bp_shlib_event:
+ break;
}
return 0;
breakpoint_re_set ()
{
struct breakpoint *b, *temp;
+ enum language save_language;
+ int save_input_radix;
static char message1[] = "Error in re-setting breakpoint %d:\n";
char message[sizeof (message1) + 30 /* slop */];
+ save_language = current_language->la_language;
+ save_input_radix = input_radix;
ALL_BREAKPOINTS_SAFE (b, temp)
{
sprintf (message, message1, b->number); /* Format possible error msg */
catch_errors (breakpoint_re_set_one, (char *) b, message,
RETURN_MASK_ALL);
}
-
- create_longjmp_breakpoint("longjmp");
- create_longjmp_breakpoint("_longjmp");
- create_longjmp_breakpoint("siglongjmp");
- create_longjmp_breakpoint(NULL);
+ set_language (save_language);
+ input_radix = save_input_radix;
+
+#ifdef GET_LONGJMP_TARGET
+ create_longjmp_breakpoint ("longjmp");
+ create_longjmp_breakpoint ("_longjmp");
+ create_longjmp_breakpoint ("siglongjmp");
+ create_longjmp_breakpoint (NULL);
+#endif
#if 0
- /* Took this out (temporaliy at least), since it produces an extra
+ /* Took this out (temporarily at least), since it produces an extra
blank line at startup. This messes up the gdbtests. -PB */
/* Blank line to finish off all those mention() messages we just printed. */
printf_filtered ("\n");
}
}
-static void
+void
enable_breakpoint (bpt)
struct breakpoint *bpt;
{
- FRAME save_selected_frame = NULL;
+ struct frame_info *save_selected_frame = NULL;
int save_selected_frame_level = -1;
+ int target_resources_ok, other_type_used;
+ struct value *mark;
+ if (bpt->type == bp_hardware_breakpoint)
+ {
+ int i;
+ i = hw_breakpoint_used_count();
+ target_resources_ok = TARGET_CAN_USE_HARDWARE_WATCHPOINT(
+ bp_hardware_breakpoint, i+1, 0);
+ if (target_resources_ok == 0)
+ error ("No hardware breakpoint support in the target.");
+ else if (target_resources_ok < 0)
+ error ("Hardware breakpoints used exceeds limit.");
+ }
bpt->enable = enabled;
-
- breakpoints_changed ();
-
check_duplicates (bpt->address);
- if (bpt->type == bp_watchpoint || bpt->type == bp_hardware_watchpoint)
+
+ if (bpt->type == bp_watchpoint || bpt->type == bp_hardware_watchpoint ||
+ bpt->type == bp_read_watchpoint || bpt->type == bp_access_watchpoint)
{
if (bpt->exp_valid_block != NULL)
{
- FRAME fr = find_frame_addr_in_frame_chain (bpt->watchpoint_frame);
+ struct frame_info *fr =
+ find_frame_addr_in_frame_chain (bpt->watchpoint_frame);
if (fr == NULL)
{
printf_filtered ("\
}
value_free (bpt->val);
-
+ mark = value_mark ();
bpt->val = evaluate_expression (bpt->exp);
release_value (bpt->val);
if (VALUE_LAZY (bpt->val))
value_fetch_lazy (bpt->val);
+ if (bpt->type == bp_hardware_watchpoint ||
+ bpt->type == bp_read_watchpoint ||
+ bpt->type == bp_access_watchpoint)
+ {
+ int i = hw_watchpoint_used_count (bpt->type, &other_type_used);
+ int mem_cnt = can_use_hardware_watchpoint (bpt->val);
+
+ target_resources_ok = TARGET_CAN_USE_HARDWARE_WATCHPOINT(
+ bpt->type, i + mem_cnt, other_type_used);
+ /* we can consider of type is bp_hardware_watchpoint, convert to
+ bp_watchpoint in the following condition */
+ if (target_resources_ok < 0)
+ {
+ printf_filtered("\
+Cannot enable watchpoint %d because target watch resources\n\
+have been allocated for other watchpoints.\n", bpt->number);
+ bpt->enable = disabled;
+ value_free_to_mark (mark);
+ return;
+ }
+ }
+
if (save_selected_frame_level >= 0)
select_frame (save_selected_frame, save_selected_frame_level);
+ value_free_to_mark (mark);
}
+
+ if (modify_breakpoint_hook)
+ modify_breakpoint_hook (bpt);
}
/* ARGSUSED */
switch (bpt->type)
{
case bp_breakpoint:
+ case bp_hardware_breakpoint:
case bp_watchpoint:
case bp_hardware_watchpoint:
+ case bp_read_watchpoint:
+ case bp_access_watchpoint:
enable_breakpoint (bpt);
default:
continue;
map_breakpoint_numbers (args, enable_breakpoint);
}
-static void
+void
disable_breakpoint (bpt)
struct breakpoint *bpt;
{
bpt->enable = disabled;
- breakpoints_changed ();
-
check_duplicates (bpt->address);
+
+ if (modify_breakpoint_hook)
+ modify_breakpoint_hook (bpt);
}
/* ARGSUSED */
switch (bpt->type)
{
case bp_breakpoint:
- case bp_watchpoint:
- case bp_hardware_watchpoint:
+ case bp_hardware_breakpoint:
+ case bp_watchpoint:
+ case bp_hardware_watchpoint:
+ case bp_read_watchpoint:
+ case bp_access_watchpoint:
disable_breakpoint (bpt);
default:
continue;
enable_once_breakpoint (bpt)
struct breakpoint *bpt;
{
+ struct frame_info *save_selected_frame = NULL;
+ int save_selected_frame_level = -1;
+ int target_resources_ok, other_type_used;
+ struct value *mark;
+
+ if (bpt->type == bp_hardware_breakpoint)
+ {
+ int i;
+ i = hw_breakpoint_used_count();
+ target_resources_ok = TARGET_CAN_USE_HARDWARE_WATCHPOINT(
+ bp_hardware_breakpoint, i+1, 0);
+ if (target_resources_ok == 0)
+ error ("No hardware breakpoint support in the target.");
+ else if (target_resources_ok < 0)
+ error ("Hardware breakpoints used exceeds limit.");
+ }
+
bpt->enable = enabled;
bpt->disposition = disable;
-
check_duplicates (bpt->address);
breakpoints_changed ();
+
+ if (bpt->type == bp_watchpoint || bpt->type == bp_hardware_watchpoint ||
+ bpt->type == bp_read_watchpoint || bpt->type == bp_access_watchpoint)
+ {
+ if (bpt->exp_valid_block != NULL)
+ {
+ struct frame_info *fr =
+ find_frame_addr_in_frame_chain (bpt->watchpoint_frame);
+ if (fr == NULL)
+ {
+ printf_filtered ("\
+Cannot enable watchpoint %d because the block in which its expression\n\
+is valid is not currently in scope.\n", bpt->number);
+ bpt->enable = disabled;
+ return;
+ }
+
+ save_selected_frame = selected_frame;
+ save_selected_frame_level = selected_frame_level;
+ select_frame (fr, -1);
+ }
+
+ value_free (bpt->val);
+ mark = value_mark ();
+ bpt->val = evaluate_expression (bpt->exp);
+ release_value (bpt->val);
+ if (VALUE_LAZY (bpt->val))
+ value_fetch_lazy (bpt->val);
+
+ if (bpt->type == bp_hardware_watchpoint ||
+ bpt->type == bp_read_watchpoint ||
+ bpt->type == bp_access_watchpoint)
+ {
+ int i = hw_watchpoint_used_count (bpt->type, &other_type_used);
+ int mem_cnt = can_use_hardware_watchpoint(bpt->val);
+ target_resources_ok = TARGET_CAN_USE_HARDWARE_WATCHPOINT(
+ bpt->type, i+mem_cnt, other_type_used);
+ /* we can consider of type is bp_hardware_watchpoint, convert to
+ bp_watchpoint in the following condition */
+ if (target_resources_ok < 0)
+ {
+ printf_filtered("\
+Cannot enable watchpoint %d because target watch resources\n\
+have been allocated for other watchpoints.\n", bpt->number);
+ bpt->enable = disabled;
+ value_free_to_mark (mark);
+ }
+ }
+
+ if (save_selected_frame_level >= 0)
+ select_frame (save_selected_frame, save_selected_frame_level);
+ value_free_to_mark (mark);
+ }
}
/* ARGSUSED */
struct breakpoint *bpt;
{
bpt->enable = enabled;
- bpt->disposition = delete;
+ bpt->disposition = del;
check_duplicates (bpt->address);
breakpoints_changed ();
map_breakpoint_numbers (args, enable_delete_breakpoint);
}
\f
-/*
- * Use default_breakpoint_'s, or nothing if they aren't valid.
- */
+/* Use default_breakpoint_'s, or nothing if they aren't valid. */
+
struct symtabs_and_lines
decode_line_spec_1 (string, funfirstline)
char *string;
breakpoint_count = 0;
add_com ("ignore", class_breakpoint, ignore_command,
- "Set ignore-count of breakpoint number N to COUNT.");
+ "Set ignore-count of breakpoint number N to COUNT.\n\
+Usage is `ignore N COUNT'.");
add_com ("commands", class_breakpoint, commands_command,
"Set commands to be executed when a breakpoint is hit.\n\
add_com ("condition", class_breakpoint, condition_command,
"Specify breakpoint number N to break only if COND is true.\n\
-N is an integer; COND is an expression to be evaluated whenever\n\
-breakpoint N is reached. ");
+Usage is `condition N COND', where N is an integer and COND is an\n\
+expression to be evaluated whenever breakpoint N is reached. ");
add_com ("tbreak", class_breakpoint, tbreak_command,
"Set a temporary breakpoint. Args like \"break\" command.\n\
so it will be deleted when hit. Equivalent to \"break\" followed\n\
by using \"enable delete\" on the breakpoint number.");
+ add_com ("hbreak", class_breakpoint, hbreak_command,
+ "Set a hardware assisted breakpoint. Args like \"break\" command.\n\
+Like \"break\" except the breakpoint requires hardware support,\n\
+some target hardware may not have this support.");
+
+ add_com ("thbreak", class_breakpoint, thbreak_command,
+ "Set a temporary hardware assisted breakpoint. Args like \"break\" command.\n\
+Like \"hbreak\" except the breakpoint is only temporary,\n\
+so it will be deleted when hit.");
+
add_prefix_cmd ("enable", class_breakpoint, enable_command,
"Enable some breakpoints.\n\
Give breakpoint numbers (separated by spaces) as arguments.\n\
&deletelist);
add_com ("clear", class_breakpoint, clear_command,
- "Clear breakpoint at specified line or function.\n\
+ concat ("Clear breakpoint at specified line or function.\n\
Argument may be line number, function name, or \"*\" and an address.\n\
If line number is specified, all breakpoints in that line are cleared.\n\
If function is specified, breakpoints at beginning of function are cleared.\n\
-If an address is specified, breakpoints at that address are cleared.\n\n\
-With no argument, clears all breakpoints in the line that the selected frame\n\
+If an address is specified, breakpoints at that address are cleared.\n\n",
+"With no argument, clears all breakpoints in the line that the selected frame\n\
is executing in.\n\
\n\
-See also the \"delete\" command which clears breakpoints by number.");
+See also the \"delete\" command which clears breakpoints by number.", NULL));
add_com ("break", class_breakpoint, break_command,
- "Set breakpoint at specified line or function.\n\
+ concat ("Set breakpoint at specified line or function.\n\
Argument may be line number, function name, or \"*\" and an address.\n\
If line number is specified, break at start of code for that line.\n\
If function is specified, break at start of code for that function.\n\
-If an address is specified, break at that exact address.\n\
-With no arg, uses current execution address of selected stack frame.\n\
+If an address is specified, break at that exact address.\n",
+"With no arg, uses current execution address of selected stack frame.\n\
This is useful for breaking on return to a stack frame.\n\
\n\
Multiple breakpoints at one place are permitted, and useful if conditional.\n\
\n\
-Do \"help breakpoints\" for info on other commands dealing with breakpoints.");
+Do \"help breakpoints\" for info on other commands dealing with breakpoints.", NULL));
add_com_alias ("b", "break", class_run, 1);
add_com_alias ("br", "break", class_run, 1);
add_com_alias ("bre", "break", class_run, 1);
add_com_alias ("brea", "break", class_run, 1);
add_info ("breakpoints", breakpoints_info,
- "Status of user-settable breakpoints, or breakpoint number NUMBER.\n\
+ concat ("Status of user-settable breakpoints, or breakpoint number NUMBER.\n\
The \"Type\" column indicates one of:\n\
\tbreakpoint - normal breakpoint\n\
\twatchpoint - watchpoint\n\
The \"Disp\" column contains one of \"keep\", \"del\", or \"dis\" to indicate\n\
the disposition of the breakpoint after it gets hit. \"dis\" means that the\n\
breakpoint will be disabled. The \"Address\" and \"What\" columns indicate the\n\
-address and file/line number respectively.\n\n\
-Convenience variable \"$_\" and default examine address for \"x\"\n\
+address and file/line number respectively.\n\n",
+"Convenience variable \"$_\" and default examine address for \"x\"\n\
are set to the address of the last breakpoint listed.\n\n\
Convenience variable \"$bpnum\" contains the number of the last\n\
-breakpoint set.");
+breakpoint set.", NULL));
#if MAINTENANCE_CMDS
add_cmd ("breakpoints", class_maintenance, maintenance_info_breakpoints,
- "Status of all breakpoints, or breakpoint number NUMBER.\n\
+ concat ("Status of all breakpoints, or breakpoint number NUMBER.\n\
The \"Type\" column indicates one of:\n\
\tbreakpoint - normal breakpoint\n\
\twatchpoint - watchpoint\n\
\tlongjmp - internal breakpoint used to step through longjmp()\n\
\tlongjmp resume - internal breakpoint at the target of longjmp()\n\
\tuntil - internal breakpoint used by the \"until\" command\n\
-\tfinish - internal breakpoint used by the \"finish\" command\n\
-The \"Disp\" column contains one of \"keep\", \"del\", or \"dis\" to indicate\n\
+\tfinish - internal breakpoint used by the \"finish\" command\n",
+"The \"Disp\" column contains one of \"keep\", \"del\", or \"dis\" to indicate\n\
the disposition of the breakpoint after it gets hit. \"dis\" means that the\n\
breakpoint will be disabled. The \"Address\" and \"What\" columns indicate the\n\
-address and file/line number respectively.\n\n\
-Convenience variable \"$_\" and default examine address for \"x\"\n\
+address and file/line number respectively.\n\n",
+"Convenience variable \"$_\" and default examine address for \"x\"\n\
are set to the address of the last breakpoint listed.\n\n\
Convenience variable \"$bpnum\" contains the number of the last\n\
-breakpoint set.",
+breakpoint set.", NULL),
&maintenanceinfolist);
#endif /* MAINTENANCE_CMDS */
A watchpoint stops execution of your program whenever the value of\n\
an expression changes.");
- add_info ("watchpoints", breakpoints_info,
- "Synonym for ``info breakpoints''.");
-}
-
-/* OK, when we call objfile_relocate, we need to relocate breakpoints
- too. breakpoint_re_set is not a good choice--for example, if
- addr_string contains just a line number without a file name the
- breakpoint might get set in a different file. In general, there is
- no need to go all the way back to the user's string (though this might
- work if some effort were made to canonicalize it), since symtabs and
- everything except addresses are still valid.
-
- Probably the best way to solve this is to have each breakpoint save
- the objfile and the section number that was used to set it (if set
- by "*addr", probably it is best to use find_pc_line to get a symtab
- and use the objfile and block_line_section for that symtab). Then
- objfile_relocate can call fixup_breakpoints with the objfile and
- the new_offsets, and it can relocate only the appropriate breakpoints. */
+ add_com ("rwatch", class_breakpoint, rwatch_command,
+ "Set a read watchpoint for an expression.\n\
+A watchpoint stops execution of your program whenever the value of\n\
+an expression is read.");
-#ifdef IBM6000_TARGET
-/* But for now, just kludge it based on the concept that before an
- objfile is relocated the breakpoint is below 0x10000000, and afterwards
- it is higher, so that way we only relocate each breakpoint once. */
+ add_com ("awatch", class_breakpoint, awatch_command,
+ "Set a watchpoint for an expression.\n\
+A watchpoint stops execution of your program whenever the value of\n\
+an expression is either read or written.");
-void
-fixup_breakpoints (low, high, delta)
- CORE_ADDR low;
- CORE_ADDR high;
- CORE_ADDR delta;
-{
- struct breakpoint *b;
+ add_info ("watchpoints", breakpoints_info,
+ "Synonym for ``info breakpoints''.");
- ALL_BREAKPOINTS (b)
- {
- if (b->address >= low && b->address <= high)
- b->address += delta;
- }
}
-#endif
projects / deliverable / binutils-gdb.git / blobdiff