}
\f
-/* Set a breakpoint according to ARG (function, linenum or *address)
- flag: first bit : 0 non-temporary, 1 temporary.
- second bit : 0 normal breakpoint, 1 hardware breakpoint. */
+/* Add SALS.nelts breakpoints to the breakpoint table. For each
+ SALS.sal[i] breakpoint, include the corresponding ADDR_STRING[i],
+ COND[i] and COND_STRING[i] values.
+
+ NOTE: If the function succeeds, the caller is expected to cleanup
+ the arrays ADDR_STRING, COND_STRING, COND and SALS (but not the
+ array contents). If the function fails (error() is called), the
+ caller is expected to cleanups both the ADDR_STRING, COND_STRING,
+ COND and SALS arrays and each of those arrays contents. */
static void
-break_command_1 (arg, flag, from_tty)
- char *arg;
- int flag, from_tty;
+create_breakpoints (struct symtabs_and_lines sals, char **addr_string,
+ struct expression **cond, char **cond_string,
+ enum bptype type, enum bpdisp disposition,
+ int thread, int ignore_count, int from_tty)
{
- int tempflag, hardwareflag;
- struct symtabs_and_lines sals;
- struct symtab_and_line sal;
- register struct expression *cond = 0;
- register struct breakpoint *b;
-
- /* Pointers in arg to the start, and one past the end, of the condition. */
- char *cond_start = NULL;
- char *cond_end = NULL;
- /* Pointers in arg to the start, and one past the end,
- of the address part. */
- char *addr_start = NULL;
- char *addr_end = NULL;
- struct cleanup *old_chain;
- struct cleanup *canonical_strings_chain = NULL;
- char **canonical = (char **) NULL;
- int i;
- int thread;
-
- hardwareflag = flag & BP_HARDWAREFLAG;
- tempflag = flag & BP_TEMPFLAG;
+ if (type == bp_hardware_breakpoint)
+ {
+ int i = hw_breakpoint_used_count ();
+ int target_resources_ok =
+ TARGET_CAN_USE_HARDWARE_WATCHPOINT (bp_hardware_breakpoint,
+ i + sals.nelts, 0);
+ if (target_resources_ok == 0)
+ error ("No hardware breakpoint support in the target.");
+ else if (target_resources_ok < 0)
+ error ("Hardware breakpoints used exceeds limit.");
+ }
- sals.sals = NULL;
- sals.nelts = 0;
+ /* Now set all the breakpoints. */
+ {
+ int i;
+ for (i = 0; i < sals.nelts; i++)
+ {
+ struct breakpoint *b;
+ struct symtab_and_line sal = sals.sals[i];
- INIT_SAL (&sal); /* initialize to zeroes */
+ if (from_tty)
+ describe_other_breakpoints (sal.pc, sal.section);
+
+ b = set_raw_breakpoint (sal);
+ set_breakpoint_count (breakpoint_count + 1);
+ b->number = breakpoint_count;
+ b->type = type;
+ b->cond = cond[i];
+ b->thread = thread;
+ b->addr_string = addr_string[i];
+ b->cond_string = cond_string[i];
+ b->ignore_count = ignore_count;
+ b->enable = enabled;
+ b->disposition = disposition;
+ mention (b);
+ }
+ }
+}
- /* If no arg given, or if first arg is 'if ', use the default breakpoint. */
+/* Parse ARG which is assumed to be a SAL specification possibly
+ followed by conditionals. On return, SALS contains an array of SAL
+ addresses found. ADDR_STRING contains a vector of (canonical)
+ address strings. ARG points to the end of the SAL. */
- if (!arg || (arg[0] == 'i' && arg[1] == 'f'
- && (arg[2] == ' ' || arg[2] == '\t')))
+void
+parse_breakpoint_sals (char **address,
+ struct symtabs_and_lines *sals,
+ char ***addr_string)
+{
+ char *addr_start = *address;
+ *addr_string = NULL;
+ /* If no arg given, or if first arg is 'if ', use the default
+ breakpoint. */
+ if ((*address) == NULL
+ || (strncmp ((*address), "if", 2) == 0 && isspace ((*address)[2])))
{
if (default_breakpoint_valid)
{
- sals.sals = (struct symtab_and_line *)
+ struct symtab_and_line sal;
+ INIT_SAL (&sal); /* initialize to zeroes */
+ sals->sals = (struct symtab_and_line *)
xmalloc (sizeof (struct symtab_and_line));
sal.pc = default_breakpoint_address;
sal.line = default_breakpoint_line;
sal.symtab = default_breakpoint_symtab;
sal.section = find_pc_overlay (sal.pc);
- sals.sals[0] = sal;
- sals.nelts = 1;
+ sals->sals[0] = sal;
+ sals->nelts = 1;
}
else
error ("No default breakpoint address now.");
}
else
{
- addr_start = arg;
-
/* Force almost all breakpoints to be in terms of the
current_source_symtab (which is decode_line_1's default). This
should produce the results we want almost all of the time while
leaving default_breakpoint_* alone. */
if (default_breakpoint_valid
&& (!current_source_symtab
- || (arg && (*arg == '+' || *arg == '-'))))
- sals = decode_line_1 (&arg, 1, default_breakpoint_symtab,
- default_breakpoint_line, &canonical);
+ || (strchr ("+-", (*address)[0]) != NULL)))
+ *sals = decode_line_1 (address, 1, default_breakpoint_symtab,
+ default_breakpoint_line, addr_string);
else
- sals = decode_line_1 (&arg, 1, (struct symtab *) NULL, 0, &canonical);
-
- addr_end = arg;
+ *sals = decode_line_1 (address, 1, (struct symtab *) NULL, 0, addr_string);
}
-
- if (!sals.nelts)
- return;
-
- /* Make sure that all storage allocated in decode_line_1 gets freed
- in case the following `for' loop errors out. */
- old_chain = make_cleanup (free, sals.sals);
- if (canonical != (char **) NULL)
+ /* For any SAL that didn't have a canonical string, fill one in. */
+ if (sals->nelts > 0 && *addr_string == NULL)
+ *addr_string = xcalloc (sals->nelts, sizeof (char **));
+ if (addr_start != (*address))
{
- make_cleanup (free, canonical);
- canonical_strings_chain = make_cleanup (null_cleanup, 0);
- for (i = 0; i < sals.nelts; i++)
+ int i;
+ for (i = 0; i < sals->nelts; i++)
{
- if (canonical[i] != NULL)
- make_cleanup (free, canonical[i]);
+ /* Add the string if not present. */
+ if ((*addr_string)[i] == NULL)
+ (*addr_string)[i] = savestring (addr_start, (*address) - addr_start);
}
}
+}
- thread = -1; /* No specific thread yet */
- /* Resolve all line numbers to PC's, and verify that conditions
- can be parsed, before setting any breakpoints. */
- for (i = 0; i < sals.nelts; i++)
- {
- char *tok, *end_tok;
- int toklen;
+/* Convert each SAL into a real PC. Verify that the PC can be
+ inserted as a breakpoint. If it can't throw an error. */
- resolve_sal_pc (&sals.sals[i]);
+void
+breakpoint_sals_to_pc (struct symtabs_and_lines *sals,
+ char *address)
+{
+ int i;
+ for (i = 0; i < sals->nelts; i++)
+ {
+ resolve_sal_pc (&sals->sals[i]);
/* It's possible for the PC to be nonzero, but still an illegal
value on some targets.
Give the target a chance to bless sals.sals[i].pc before we
try to make a breakpoint for it. */
- if (PC_REQUIRES_RUN_BEFORE_USE (sals.sals[i].pc))
+ if (PC_REQUIRES_RUN_BEFORE_USE (sals->sals[i].pc))
{
- error ("Cannot break on %s without a running program.",
- addr_start);
+ if (address == NULL)
+ error ("Cannot break without a running program.");
+ else
+ error ("Cannot break on %s without a running program.",
+ address);
}
+ }
+}
- tok = arg;
+/* Set a breakpoint according to ARG (function, linenum or *address)
+ flag: first bit : 0 non-temporary, 1 temporary.
+ second bit : 0 normal breakpoint, 1 hardware breakpoint. */
+
+static void
+break_command_1 (arg, flag, from_tty)
+ char *arg;
+ int flag, from_tty;
+{
+ int tempflag, hardwareflag;
+ struct symtabs_and_lines sals;
+ register struct expression **cond = 0;
+ /* Pointers in arg to the start, and one past the end, of the
+ condition. */
+ char **cond_string = (char **) NULL;
+ char *addr_start = arg;
+ char **addr_string;
+ struct cleanup *old_chain;
+ struct cleanup *breakpoint_chain = NULL;
+ int i;
+ int thread = -1;
+ int ignore_count = 0;
+
+ hardwareflag = flag & BP_HARDWAREFLAG;
+ tempflag = flag & BP_TEMPFLAG;
+ sals.sals = NULL;
+ sals.nelts = 0;
+ addr_string = NULL;
+ parse_breakpoint_sals (&arg, &sals, &addr_string);
+
+ if (!sals.nelts)
+ return;
+
+ /* Create a chain of things that always need to be cleaned up. */
+ old_chain = make_cleanup (null_cleanup, 0);
+
+ /* Make sure that all storage allocated to SALS gets freed. */
+ make_cleanup (free, sals.sals);
+
+ /* Cleanup the addr_string array but not its contents. */
+ make_cleanup (free, addr_string);
+
+ /* Allocate space for all the cond expressions. */
+ cond = xcalloc (sals.nelts, sizeof (struct expression *));
+ make_cleanup (free, cond);
+
+ /* Allocate space for all the cond strings. */
+ cond_string = xcalloc (sals.nelts, sizeof (char **));
+ make_cleanup (free, cond_string);
+
+ /* ----------------------------- SNIP -----------------------------
+ Anything added to the cleanup chain beyond this point is assumed
+ to be part of a breakpoint. If the breakpoint create succeeds
+ then the memory is not reclaimed. */
+ breakpoint_chain = make_cleanup (null_cleanup, 0);
+
+ /* Mark the contents of the addr_string for cleanup. These go on
+ the breakpoint_chain and only occure if the breakpoint create
+ fails. */
+ for (i = 0; i < sals.nelts; i++)
+ {
+ if (addr_string[i] != NULL)
+ make_cleanup (free, addr_string[i]);
+ }
+
+ /* Resolve all line numbers to PC's and verify that the addresses
+ are ok for the target. */
+ breakpoint_sals_to_pc (&sals, addr_start);
+
+ /* Verify that condition can be parsed, before setting any
+ breakpoints. Allocate a separate condition expression for each
+ breakpoint. */
+ thread = -1; /* No specific thread yet */
+ for (i = 0; i < sals.nelts; i++)
+ {
+ char *tok = arg;
while (tok && *tok)
{
+ char *end_tok;
+ int toklen;
+ char *cond_start = NULL;
+ char *cond_end = NULL;
while (*tok == ' ' || *tok == '\t')
tok++;
if (toklen >= 1 && strncmp (tok, "if", toklen) == 0)
{
tok = cond_start = end_tok + 1;
- cond = parse_exp_1 (&tok, block_for_pc (sals.sals[i].pc), 0);
+ cond[i] = parse_exp_1 (&tok, block_for_pc (sals.sals[i].pc), 0);
+ make_cleanup (free, cond[i]);
cond_end = tok;
+ cond_string[i] = savestring (cond_start, cond_end - cond_start);
+ make_cleanup (free, cond_string[i]);
}
else if (toklen >= 1 && strncmp (tok, "thread", toklen) == 0)
{
error ("Junk at end of arguments.");
}
}
- if (hardwareflag)
- {
- int i, target_resources_ok;
- i = hw_breakpoint_used_count ();
- target_resources_ok =
- TARGET_CAN_USE_HARDWARE_WATCHPOINT (bp_hardware_breakpoint,
- i + sals.nelts, 0);
- if (target_resources_ok == 0)
- error ("No hardware breakpoint support in the target.");
- else if (target_resources_ok < 0)
- error ("Hardware breakpoints used exceeds limit.");
+ create_breakpoints (sals, addr_string, cond, cond_string,
+ hardwareflag ? bp_hardware_breakpoint : bp_breakpoint,
+ tempflag ? del : donttouch,
+ thread, ignore_count, from_tty);
+
+ if (sals.nelts > 1)
+ {
+ warning ("Multiple breakpoints were set.");
+ warning ("Use the \"delete\" command to delete unwanted breakpoints.");
}
+ /* That's it. Discard the cleanups for data inserted into the
+ breakpoint. */
+ discard_cleanups (breakpoint_chain);
+ /* But cleanup everything else. */
+ do_cleanups (old_chain);
+}
- /* Remove the canonical strings from the cleanup, they are needed below. */
- if (canonical != (char **) NULL)
- discard_cleanups (canonical_strings_chain);
+/* Set a breakpoint of TYPE/DISPOSITION according to ARG (function,
+ linenum or *address) with COND and IGNORE_COUNT. */
- /* Now set all the breakpoints. */
- for (i = 0; i < sals.nelts; i++)
- {
- sal = sals.sals[i];
+struct captured_breakpoint_args
+ {
+ char *address;
+ char *condition;
+ int hardwareflag;
+ int tempflag;
+ int thread;
+ int ignore_count;
+ };
- if (from_tty)
- describe_other_breakpoints (sal.pc, sal.section);
+static int
+do_captured_breakpoint (void *data)
+{
+ struct captured_breakpoint_args *args = data;
+ struct symtabs_and_lines sals;
+ register struct expression **cond;
+ struct cleanup *old_chain;
+ struct cleanup *breakpoint_chain = NULL;
+ int i;
+ char **addr_string;
+ char **cond_string;
- b = set_raw_breakpoint (sal);
- set_breakpoint_count (breakpoint_count + 1);
- b->number = breakpoint_count;
- b->type = hardwareflag ? bp_hardware_breakpoint : bp_breakpoint;
- b->cond = cond;
- b->thread = thread;
+ char *address_end;
- /* If a canonical line spec is needed use that instead of the
- command string. */
- if (canonical != (char **) NULL && canonical[i] != NULL)
- b->addr_string = canonical[i];
- else if (addr_start)
- b->addr_string = savestring (addr_start, addr_end - addr_start);
- if (cond_start)
- b->cond_string = savestring (cond_start, cond_end - cond_start);
+ /* Parse the source and lines spec. Delay check that the expression
+ didn't contain trailing garbage until after cleanups are in
+ place. */
+ sals.sals = NULL;
+ sals.nelts = 0;
+ address_end = args->address;
+ addr_string = NULL;
+ parse_breakpoint_sals (&address_end, &sals, &addr_string);
- b->enable = enabled;
- b->disposition = tempflag ? del : donttouch;
- mention (b);
+ if (!sals.nelts)
+ return GDB_RC_NONE;
+
+ /* Create a chain of things at always need to be cleaned up. */
+ old_chain = make_cleanup (null_cleanup, 0);
+
+ /* Always have a addr_string array, even if it is empty. */
+ make_cleanup (free, addr_string);
+
+ /* Make sure that all storage allocated to SALS gets freed. */
+ make_cleanup (free, sals.sals);
+
+ /* Allocate space for all the cond expressions. */
+ cond = xcalloc (sals.nelts, sizeof (struct expression *));
+ make_cleanup (free, cond);
+
+ /* Allocate space for all the cond strings. */
+ cond_string = xcalloc (sals.nelts, sizeof (char **));
+ make_cleanup (free, cond_string);
+
+ /* ----------------------------- SNIP -----------------------------
+ Anything added to the cleanup chain beyond this point is assumed
+ to be part of a breakpoint. If the breakpoint create goes
+ through then that memory is not cleaned up. */
+ breakpoint_chain = make_cleanup (null_cleanup, 0);
+
+ /* Mark the contents of the addr_string for cleanup. These go on
+ the breakpoint_chain and only occure if the breakpoint create
+ fails. */
+ for (i = 0; i < sals.nelts; i++)
+ {
+ if (addr_string[i] != NULL)
+ make_cleanup (free, addr_string[i]);
}
- if (sals.nelts > 1)
+ /* Wait until now before checking for garbage at the end of the
+ address. That way cleanups can take care of freeing any
+ memory. */
+ if (*address_end != '\0')
+ error ("Garbage %s following breakpoint address", address_end);
+
+ /* Resolve all line numbers to PC's. */
+ breakpoint_sals_to_pc (&sals, args->address);
+
+ /* Verify that conditions can be parsed, before setting any
+ breakpoints. */
+ for (i = 0; i < sals.nelts; i++)
{
- warning ("Multiple breakpoints were set.");
- warning ("Use the \"delete\" command to delete unwanted breakpoints.");
+ if (args->condition != NULL)
+ {
+ char *tok = args->condition;
+ cond[i] = parse_exp_1 (&tok, block_for_pc (sals.sals[i].pc), 0);
+ if (*tok != '\0')
+ error ("Garbage %s follows condition", tok);
+ make_cleanup (free, cond[i]);
+ cond_string[i] = xstrdup (args->condition);
+ }
}
+
+ create_breakpoints (sals, addr_string, cond, cond_string,
+ args->hardwareflag ? bp_hardware_breakpoint : bp_breakpoint,
+ args->tempflag ? del : donttouch,
+ args->thread, args->ignore_count, 0/*from-tty*/);
+
+ /* That's it. Discard the cleanups for data inserted into the
+ breakpoint. */
+ discard_cleanups (breakpoint_chain);
+ /* But cleanup everything else. */
do_cleanups (old_chain);
+ return GDB_RC_OK;
}
+enum gdb_rc
+gdb_breakpoint (char *address, char *condition,
+ int hardwareflag, int tempflag,
+ int thread, int ignore_count)
+{
+ struct captured_breakpoint_args args;
+ args.address = address;
+ args.condition = condition;
+ args.hardwareflag = hardwareflag;
+ args.tempflag = tempflag;
+ args.thread = thread;
+ args.ignore_count = ignore_count;
+ return catch_errors (do_captured_breakpoint, &args,
+ NULL, RETURN_MASK_ALL);
+}
+
+
static void
break_at_finish_at_depth_command_1 (arg, flag, from_tty)
char *arg;
projects / deliverable / binutils-gdb.git / blobdiff