/* Everything about breakpoints, for GDB.
- Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc.
+ Copyright 1986, 1987, 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
This file is part of GDB.
-GDB is free software; you can redistribute it and/or modify
+This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
-GDB is distributed in the hope that it will be useful,
+This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
-along with GDB; see the file COPYING. If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-#include <stdio.h>
#include "defs.h"
-#include "param.h"
+#include <ctype.h>
#include "symtab.h"
#include "frame.h"
+#include "breakpoint.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "gdbcore.h"
+#include "gdbcmd.h"
+#include "value.h"
+#include "ctype.h"
+#include "command.h"
+#include "inferior.h"
+#include "thread.h"
+#include "target.h"
+#include "language.h"
+#include <string.h>
+#include "demangle.h"
+
+/* local function prototypes */
-/* This is the sequence of bytes we insert for a breakpoint. */
-
-static char break_insn[] = BREAKPOINT;
-
-/* States of enablement of breakpoint.
- `temporary' means disable when hit.
- `delete' means delete when hit. */
-
-enum enable { disabled, enabled, temporary, delete};
-
-/* Not that the ->silent field is not currently used by any commands
- (though the code is in there if it was to be and set_raw_breakpoint
- does set it to 0). I implemented it because I thought it would be
- useful for a hack I had to put in; I'm going to leave it in because
- I can see how there might be times when it would indeed be useful */
-
-struct breakpoint
-{
- struct breakpoint *next;
- /* Number assigned to distinguish breakpoints. */
- int number;
- /* Address to break at. */
- CORE_ADDR address;
- /* Line number of this address. Redundant. */
- int line_number;
- /* Symtab of file of this address. Redundant. */
- struct symtab *symtab;
- /* Zero means disabled; remember the info but don't break here. */
- enum enable enable;
- /* Non-zero means a silent breakpoint (don't print frame info
- if we stop here). */
- unsigned char silent;
- /* Number of stops at this breakpoint that should
- be continued automatically before really stopping. */
- int ignore_count;
- /* "Real" contents of byte where breakpoint has been inserted.
- Valid only when breakpoints are in the program. */
- char shadow_contents[sizeof break_insn];
- /* Nonzero if this breakpoint is now inserted. */
- char inserted;
- /* Nonzero if this is not the first breakpoint in the list
- for the given address. */
- char duplicate;
- /* Chain of command lines to execute when this breakpoint is hit. */
- struct command_line *commands;
- /* Stack depth (address of frame). If nonzero, break only if fp
- equals this. */
- FRAME_ADDR frame;
- /* Conditional. Break only if this expression's value is nonzero. */
- struct expression *cond;
-};
+static void
+catch_command_1 PARAMS ((char *, int, int));
+
+static void
+enable_delete_command PARAMS ((char *, int));
+
+static void
+enable_delete_breakpoint PARAMS ((struct breakpoint *));
+
+static void
+enable_once_command PARAMS ((char *, int));
+
+static void
+enable_once_breakpoint PARAMS ((struct breakpoint *));
+
+static void
+disable_command PARAMS ((char *, int));
+
+static void
+disable_breakpoint PARAMS ((struct breakpoint *));
+
+static void
+enable_command PARAMS ((char *, int));
+
+static void
+enable_breakpoint PARAMS ((struct breakpoint *));
+
+static void
+map_breakpoint_numbers PARAMS ((char *, void (*)(struct breakpoint *)));
+
+static void
+ignore_command PARAMS ((char *, int));
+
+static int
+breakpoint_re_set_one PARAMS ((char *));
+
+static void
+delete_command PARAMS ((char *, int));
+
+static void
+clear_command PARAMS ((char *, int));
+
+static void
+catch_command PARAMS ((char *, int));
+
+static struct symtabs_and_lines
+get_catch_sals PARAMS ((int));
+
+static void
+watch_command PARAMS ((char *, int));
+
+static void
+tbreak_command PARAMS ((char *, int));
+
+static void
+break_command_1 PARAMS ((char *, int, int));
+
+static void
+mention PARAMS ((struct breakpoint *));
+
+static struct breakpoint *
+set_raw_breakpoint PARAMS ((struct symtab_and_line));
+
+static void
+check_duplicates PARAMS ((CORE_ADDR));
+
+static void
+describe_other_breakpoints PARAMS ((CORE_ADDR));
+
+static void
+breakpoints_info PARAMS ((char *, int));
+
+static void
+breakpoint_1 PARAMS ((int, int));
+
+static bpstat
+bpstat_alloc PARAMS ((struct breakpoint *, bpstat));
+
+static int
+breakpoint_cond_eval PARAMS ((char *));
+
+static void
+cleanup_executing_breakpoints PARAMS ((int));
+
+static void
+commands_command PARAMS ((char *, int));
+
+static void
+condition_command PARAMS ((char *, int));
+
+static int
+get_number PARAMS ((char **));
+
+static void
+set_breakpoint_count PARAMS ((int));
+
+
+extern int addressprint; /* Print machine addresses? */
+extern int demangle; /* Print de-mangled symbol names? */
+
+/* Are we executing breakpoint commands? */
+static int executing_breakpoint_commands;
+
+/* Walk the following statement or block through all breakpoints.
+ ALL_BREAKPOINTS_SAFE does so even if the statment deletes the current
+ breakpoint. */
#define ALL_BREAKPOINTS(b) for (b = breakpoint_chain; b; b = b->next)
+#define ALL_BREAKPOINTS_SAFE(b,tmp) \
+ for (b = breakpoint_chain; \
+ b? (tmp=b->next, 1): 0; \
+ b = tmp)
+
/* Chain of all breakpoints defined. */
-struct breakpoint *breakpoint_chain;
+static struct breakpoint *breakpoint_chain;
/* Number of last breakpoint made. */
static int breakpoint_count;
+/* Set breakpoint count to NUM. */
+static void
+set_breakpoint_count (num)
+ int num;
+{
+ breakpoint_count = num;
+ set_internalvar (lookup_internalvar ("bpnum"),
+ value_from_longest (builtin_type_int, (LONGEST) num));
+}
+
/* Default address, symtab and line to put a breakpoint at
for "break" command with no arg.
if default_breakpoint_valid is zero, the other three are
struct symtab *default_breakpoint_symtab;
int default_breakpoint_line;
-/* Remaining commands (not yet executed)
- of last breakpoint hit. */
-
-struct command_line *breakpoint_commands;
-
-static void delete_breakpoint ();
-void clear_momentary_breakpoints ();
-void breakpoint_auto_delete ();
-
/* Flag indicating extra verbosity for xgdb. */
extern int xgdb_verbose;
\f
+/* *PP is a string denoting a breakpoint. Get the number of the breakpoint.
+ Advance *PP after the string and any trailing whitespace.
+
+ Currently the string can either be a number or "$" followed by the name
+ of a convenience variable. Making it an expression wouldn't work well
+ for map_breakpoint_numbers (e.g. "4 + 5 + 6"). */
+static int
+get_number (pp)
+ char **pp;
+{
+ int retval;
+ char *p = *pp;
+
+ if (p == NULL)
+ /* Empty line means refer to the last breakpoint. */
+ return breakpoint_count;
+ else if (*p == '$')
+ {
+ /* Make a copy of the name, so we can null-terminate it
+ to pass to lookup_internalvar(). */
+ char *varname;
+ char *start = ++p;
+ value val;
+
+ while (isalnum (*p) || *p == '_')
+ p++;
+ varname = (char *) alloca (p - start + 1);
+ strncpy (varname, start, p - start);
+ varname[p - start] = '\0';
+ val = value_of_internalvar (lookup_internalvar (varname));
+ if (TYPE_CODE (VALUE_TYPE (val)) != TYPE_CODE_INT)
+ error (
+"Convenience variables used to specify breakpoints must have integer values."
+ );
+ retval = (int) value_as_long (val);
+ }
+ else
+ {
+ if (*p == '-')
+ ++p;
+ while (*p >= '0' && *p <= '9')
+ ++p;
+ if (p == *pp)
+ /* There is no number here. (e.g. "cond a == b"). */
+ error_no_arg ("breakpoint number");
+ retval = atoi (*pp);
+ }
+ if (!(isspace (*p) || *p == '\0'))
+ error ("breakpoint number expected");
+ while (isspace (*p))
+ p++;
+ *pp = p;
+ return retval;
+}
+\f
/* condition N EXP -- set break condition of breakpoint N to EXP. */
static void
int from_tty;
{
register struct breakpoint *b;
- register char *p;
+ char *p;
register int bnum;
- register struct expression *expr;
if (arg == 0)
error_no_arg ("breakpoint number");
p = arg;
- while (*p >= '0' && *p <= '9') p++;
- if (p == arg)
- /* There is no number here. (e.g. "cond a == b"). */
- error_no_arg ("breakpoint number");
- bnum = atoi (arg);
+ bnum = get_number (&p);
ALL_BREAKPOINTS (b)
if (b->number == bnum)
{
if (b->cond)
- free (b->cond);
+ {
+ free ((PTR)b->cond);
+ b->cond = 0;
+ }
+ if (b->cond_string != NULL)
+ free ((PTR)b->cond_string);
+
if (*p == 0)
{
b->cond = 0;
+ b->cond_string = NULL;
if (from_tty)
- printf ("Breakpoint %d now unconditional.\n", bnum);
+ printf_filtered ("Breakpoint %d now unconditional.\n", bnum);
}
else
{
- if (*p != ' ' && *p != '\t')
- error ("Arguments must be an integer (breakpoint number) and an expression.");
-
- /* Find start of expression */
- while (*p == ' ' || *p == '\t') p++;
-
arg = p;
- b->cond = (struct expression *) parse_c_1 (&arg, block_for_pc (b->address), 0);
+ /* I don't know if it matters whether this is the string the user
+ typed in or the decompiled expression. */
+ b->cond_string = savestring (arg, strlen (arg));
+ b->cond = parse_exp_1 (&arg, block_for_pc (b->address), 0);
if (*arg)
error ("Junk at end of expression");
}
error ("No breakpoint number %d.", bnum);
}
+/* ARGSUSED */
static void
-commands_command (arg)
+commands_command (arg, from_tty)
char *arg;
+ int from_tty;
{
register struct breakpoint *b;
- register char *p, *p1;
+ char *p;
register int bnum;
struct command_line *l;
free the storage, if we change the commands currently
being read from. */
- if (breakpoint_commands)
+ if (executing_breakpoint_commands)
error ("Can't use the \"commands\" command among a breakpoint's commands.");
- /* Allow commands by itself to refer to the last breakpoint. */
- if (arg == 0)
- bnum = breakpoint_count;
- else
- {
- p = arg;
- if (! (*p >= '0' && *p <= '9'))
- error ("Argument must be integer (a breakpoint number).");
-
- while (*p >= '0' && *p <= '9') p++;
- if (*p)
- error ("Unexpected extra arguments following breakpoint number.");
+ p = arg;
+ bnum = get_number (&p);
+ if (p && *p)
+ error ("Unexpected extra arguments following breakpoint number.");
- bnum = atoi (arg);
- }
-
ALL_BREAKPOINTS (b)
if (b->number == bnum)
{
- if (input_from_terminal_p ())
- {
- printf ("Type commands for when breakpoint %d is hit, one per line.\n\
+ if (from_tty && input_from_terminal_p ())
+ printf_filtered ("Type commands for when breakpoint %d is hit, one per line.\n\
End with a line saying just \"end\".\n", bnum);
- fflush (stdout);
- }
l = read_command_lines ();
free_command_lines (&b->commands);
b->commands = l;
}
error ("No breakpoint number %d.", bnum);
}
+\f
+extern int memory_breakpoint_size; /* from mem-break.c */
-/* Called from command loop to execute the commands
- associated with the breakpoint we just stopped at. */
+/* Like target_read_memory() but if breakpoints are inserted, return
+ the shadow contents instead of the breakpoints themselves.
-void
-do_breakpoint_commands ()
+ Read "memory data" from whatever target or inferior we have.
+ Returns zero if successful, errno value if not. EIO is used
+ for address out of bounds. If breakpoints are inserted, returns
+ shadow contents, not the breakpoints themselves. From breakpoint.c. */
+
+int
+read_memory_nobpt (memaddr, myaddr, len)
+ CORE_ADDR memaddr;
+ char *myaddr;
+ unsigned len;
{
- while (breakpoint_commands)
- {
- char *line = breakpoint_commands->line;
- breakpoint_commands = breakpoint_commands->next;
- execute_command (line, 0);
- /* If command was "cont", breakpoint_commands is now 0,
- of if we stopped at yet another breakpoint which has commands,
- it is now the commands for the new breakpoint. */
- }
- clear_momentary_breakpoints ();
-}
+ int status;
+ struct breakpoint *b;
-/* Used when the program is proceeded, to eliminate any remaining
- commands attached to the previous breakpoint we stopped at. */
+ if (memory_breakpoint_size < 0)
+ /* No breakpoints on this machine. FIXME: This should be
+ dependent on the debugging target. Probably want
+ target_insert_breakpoint to return a size, saying how many
+ bytes of the shadow contents are used, or perhaps have
+ something like target_xfer_shadow. */
+ return target_read_memory (memaddr, myaddr, len);
+
+ ALL_BREAKPOINTS (b)
+ {
+ if (b->type == bp_watchpoint || !b->inserted)
+ continue;
+ else if (b->address + memory_breakpoint_size <= memaddr)
+ /* The breakpoint is entirely before the chunk of memory
+ we are reading. */
+ continue;
+ else if (b->address >= memaddr + len)
+ /* The breakpoint is entirely after the chunk of memory we
+ are reading. */
+ continue;
+ else
+ {
+ /* Copy the breakpoint from the shadow contents, and recurse
+ for the things before and after. */
+
+ /* Addresses and length of the part of the breakpoint that
+ we need to copy. */
+ CORE_ADDR membpt = b->address;
+ unsigned int bptlen = memory_breakpoint_size;
+ /* Offset within shadow_contents. */
+ int bptoffset = 0;
+
+ if (membpt < memaddr)
+ {
+ /* Only copy the second part of the breakpoint. */
+ bptlen -= memaddr - membpt;
+ bptoffset = memaddr - membpt;
+ membpt = memaddr;
+ }
-void
-clear_breakpoint_commands ()
-{
- breakpoint_commands = 0;
- breakpoint_auto_delete (0);
-}
+ if (membpt + bptlen > memaddr + len)
+ {
+ /* Only copy the first part of the breakpoint. */
+ bptlen -= (membpt + bptlen) - (memaddr + len);
+ }
-/* Functions to get and set the current list of pending
- breakpoint commands. These are used by run_stack_dummy
- to preserve the commands around a function call. */
+ memcpy (myaddr + membpt - memaddr,
+ b->shadow_contents + bptoffset, bptlen);
-struct command_line *
-get_breakpoint_commands ()
-{
- return breakpoint_commands;
-}
+ if (membpt > memaddr)
+ {
+ /* Copy the section of memory before the breakpoint. */
+ status = read_memory_nobpt (memaddr, myaddr, membpt - memaddr);
+ if (status != 0)
+ return status;
+ }
-void
-set_breakpoint_commands (cmds)
- struct command_line *cmds;
-{
- breakpoint_commands = cmds;
+ if (membpt + bptlen < memaddr + len)
+ {
+ /* Copy the section of memory after the breakpoint. */
+ status = read_memory_nobpt
+ (membpt + bptlen,
+ myaddr + membpt + bptlen - memaddr,
+ memaddr + len - (membpt + bptlen));
+ if (status != 0)
+ return status;
+ }
+ return 0;
+ }
+ }
+ /* Nothing overlaps. Just call read_memory_noerr. */
+ return target_read_memory (memaddr, myaddr, len);
}
\f
/* insert_breakpoints is used when starting or continuing the program.
insert_breakpoints ()
{
register struct breakpoint *b;
- int val;
-
-#ifdef BREAKPOINT_DEBUG
- printf ("Inserting breakpoints.\n");
-#endif /* BREAKPOINT_DEBUG */
+ int val = 0;
+ int disabled_breaks = 0;
ALL_BREAKPOINTS (b)
- if (b->enable != disabled && ! b->inserted && ! b->duplicate)
+ if (b->type != bp_watchpoint
+ && b->enable != disabled
+ && ! b->inserted
+ && ! b->duplicate)
{
- read_memory (b->address, b->shadow_contents, sizeof break_insn);
- val = write_memory (b->address, break_insn, sizeof break_insn);
+ val = target_insert_breakpoint(b->address, b->shadow_contents);
if (val)
- return val;
-#ifdef BREAKPOINT_DEBUG
- printf ("Inserted breakpoint at 0x%x, shadow 0x%x, 0x%x.\n",
- b->address, b->shadow_contents[0], b->shadow_contents[1]);
-#endif /* BREAKPOINT_DEBUG */
- b->inserted = 1;
+ {
+ /* Can't set the breakpoint. */
+#if defined (DISABLE_UNSETTABLE_BREAK)
+ if (DISABLE_UNSETTABLE_BREAK (b->address))
+ {
+ val = 0;
+ b->enable = disabled;
+ if (!disabled_breaks)
+ {
+ target_terminal_ours_for_output ();
+ fprintf_unfiltered (gdb_stderr,
+ "Cannot insert breakpoint %d:\n", b->number);
+ printf_filtered ("Disabling shared library breakpoints:\n");
+ }
+ disabled_breaks = 1;
+ printf_filtered ("%d ", b->number);
+ }
+ else
+#endif
+ {
+ target_terminal_ours_for_output ();
+ fprintf_unfiltered (gdb_stderr, "Cannot insert breakpoint %d:\n", b->number);
+#ifdef ONE_PROCESS_WRITETEXT
+ fprintf_unfiltered (gdb_stderr,
+ "The same program may be running in another process.\n");
+#endif
+ memory_error (val, b->address); /* which bombs us out */
+ }
+ }
+ else
+ b->inserted = 1;
}
- return 0;
+ if (disabled_breaks)
+ printf_filtered ("\n");
+ return val;
}
int
register struct breakpoint *b;
int val;
-#ifdef BREAKPOINT_DEBUG
- printf ("Removing breakpoints.\n");
-#endif /* BREAKPOINT_DEBUG */
-
ALL_BREAKPOINTS (b)
- if (b->inserted)
+ if (b->type != bp_watchpoint && b->inserted)
{
- val = write_memory (b->address, b->shadow_contents, sizeof break_insn);
+ val = target_remove_breakpoint(b->address, b->shadow_contents);
if (val)
return val;
b->inserted = 0;
-#ifdef BREAKPOINT_DEBUG
- printf ("Removed breakpoint at 0x%x, shadow 0x%x, 0x%x.\n",
- b->address, b->shadow_contents[0], b->shadow_contents[1]);
-#endif /* BREAKPOINT_DEBUG */
}
return 0;
}
-/* Clear the "inserted" flag in all breakpoints.
- This is done when the inferior is loaded. */
+/* Clear the "inserted" flag in all breakpoints. */
void
mark_breakpoints_out ()
b->inserted = 0;
}
+/* Clear the "inserted" flag in all breakpoints and delete any breakpoints
+ which should go away between runs of the program. */
+
+void
+breakpoint_init_inferior ()
+{
+ register struct breakpoint *b, *temp;
+
+ ALL_BREAKPOINTS_SAFE (b, temp)
+ {
+ b->inserted = 0;
+
+ /* If the call dummy breakpoint is at the entry point it will
+ cause problems when the inferior is rerun, so we better
+ get rid of it. */
+ if (b->type == bp_call_dummy)
+ delete_breakpoint (b);
+ }
+}
+
/* breakpoint_here_p (PC) returns 1 if an enabled breakpoint exists at PC.
When continuing from a location with a breakpoint,
we actually single step once before calling insert_breakpoints. */
return 0;
}
-/* Evaluate the expression EXP and return 1 if value is zero.
- This is used inside a catch_errors to evaluate the breakpoint condition. */
+/* Return nonzero if FRAME is a dummy frame. We can't use PC_IN_CALL_DUMMY
+ because figuring out the saved SP would take too much time, at least using
+ get_saved_register on the 68k. This means that for this function to
+ work right a port must use the bp_call_dummy breakpoint. */
int
-breakpoint_cond_eval (exp)
- struct expression *exp;
+frame_in_dummy (frame)
+ FRAME frame;
{
- return value_zerop (evaluate_expression (exp));
+ struct breakpoint *b;
+
+#ifdef CALL_DUMMY
+ ALL_BREAKPOINTS (b)
+ {
+ static unsigned LONGEST dummy[] = CALL_DUMMY;
+
+ if (b->type == bp_call_dummy
+ && b->frame == frame->frame
+
+ /* We need to check the PC as well as the frame on the sparc,
+ for signals.exp in the testsuite. */
+ && (frame->pc
+ >= (b->address
+ - sizeof (dummy) / sizeof (LONGEST) * REGISTER_SIZE))
+ && frame->pc <= b->address)
+ return 1;
+ }
+#endif /* CALL_DUMMY */
+ return 0;
}
-/* Return 0 if PC is not the address just after a breakpoint,
- or -1 if breakpoint says do not stop now,
- or -2 if breakpoint says it has deleted itself and don't stop,
- or -3 if hit a breakpoint number -3 (delete when program stops),
- or else the number of the breakpoint,
- with 0x1000000 added (or subtracted, for a negative return value) for
- a silent breakpoint. */
+/* breakpoint_match_thread (PC, PID) returns true if the breakpoint at PC
+ is valid for process/thread PID. */
int
-breakpoint_stop_status (pc, frame_address)
+breakpoint_thread_match (pc, pid)
CORE_ADDR pc;
- FRAME_ADDR frame_address;
+ int pid;
{
- register struct breakpoint *b;
- register int cont = 0;
+ struct breakpoint *b;
+ int thread;
- /* Get the address where the breakpoint would have been. */
- pc -= DECR_PC_AFTER_BREAK;
+ thread = pid_to_thread_id (pid);
ALL_BREAKPOINTS (b)
- if (b->enable != disabled && b->address == pc)
- {
- if (b->frame && b->frame != frame_address)
- cont = -1;
- else
- {
- int value_zero;
- if (b->cond)
- {
- /* Need to select the frame, with all that implies
- so that the conditions will have the right context. */
- select_frame (get_current_frame (), 0);
- value_zero
- = catch_errors (breakpoint_cond_eval, b->cond,
- "Error occurred in testing breakpoint condition.");
- free_all_values ();
- }
- if (b->cond && value_zero)
- {
- cont = -1;
- }
- else if (b->ignore_count > 0)
- {
- b->ignore_count--;
- cont = -1;
- }
- else
- {
- if (b->enable == temporary)
- b->enable = disabled;
- breakpoint_commands = b->commands;
- if (b->silent
- || (breakpoint_commands
- && !strcmp ("silent", breakpoint_commands->line)))
- {
- if (breakpoint_commands)
- breakpoint_commands = breakpoint_commands->next;
- return (b->number > 0 ?
- 0x1000000 + b->number :
- b->number - 0x1000000);
- }
- return b->number;
- }
- }
- }
+ if (b->enable != disabled
+ && b->address == pc
+ && (b->thread == -1 || b->thread == thread))
+ return 1;
- return cont;
+ return 0;
}
+
\f
-static void
-breakpoint_1 (bnum)
- int bnum;
+/* bpstat stuff. External routines' interfaces are documented
+ in breakpoint.h. */
+
+/* Clear a bpstat so that it says we are not at any breakpoint.
+ Also free any storage that is part of a bpstat. */
+
+void
+bpstat_clear (bsp)
+ bpstat *bsp;
{
- register struct breakpoint *b;
- register struct command_line *l;
- register struct symbol *sym;
- CORE_ADDR last_addr = (CORE_ADDR)-1;
+ bpstat p;
+ bpstat q;
- ALL_BREAKPOINTS (b)
- if (bnum == -1 || bnum == b->number)
- {
- printf_filtered ("#%-3d %c 0x%08x ", b->number,
- "nyod"[(int) b->enable],
- b->address);
- last_addr = b->address;
- if (b->symtab)
- {
- sym = find_pc_function (b->address);
- if (sym)
- printf_filtered (" in %s (%s line %d)", SYMBOL_NAME (sym),
- b->symtab->filename, b->line_number);
- else
- printf_filtered ("%s line %d", b->symtab->filename, b->line_number);
- }
- else
- {
- char *name;
- int addr;
+ if (bsp == 0)
+ return;
+ p = *bsp;
+ while (p != NULL)
+ {
+ q = p->next;
+ if (p->old_val != NULL)
+ value_free (p->old_val);
+ free ((PTR)p);
+ p = q;
+ }
+ *bsp = NULL;
+}
- if (find_pc_partial_function (b->address, &name, &addr))
- {
- if (b->address - addr)
- printf_filtered ("<%s+%d>", name, b->address - addr);
- else
- printf_filtered ("<%s>", name);
- }
- }
-
- printf_filtered ("\n");
+/* Return a copy of a bpstat. Like "bs1 = bs2" but all storage that
+ is part of the bpstat is copied as well. */
- if (b->ignore_count)
- printf_filtered ("\tignore next %d hits\n", b->ignore_count);
- if (b->frame)
- printf_filtered ("\tstop only in stack frame at 0x%x\n", b->frame);
- if (b->cond)
- {
- printf_filtered ("\tbreak only if ");
- print_expression (b->cond, stdout);
- printf_filtered ("\n");
- }
- if (l = b->commands)
- while (l)
- {
- printf_filtered ("\t%s\n", l->line);
- l = l->next;
- }
- }
+bpstat
+bpstat_copy (bs)
+ bpstat bs;
+{
+ bpstat p = NULL;
+ bpstat tmp;
+ bpstat retval = NULL;
- /* Compare against (CORE_ADDR)-1 in case some compiler decides
- that a comparison of an unsigned with -1 is always false. */
- if (last_addr != (CORE_ADDR)-1)
- set_next_address (last_addr);
+ if (bs == NULL)
+ return bs;
+
+ for (; bs != NULL; bs = bs->next)
+ {
+ tmp = (bpstat) xmalloc (sizeof (*tmp));
+ memcpy (tmp, bs, sizeof (*tmp));
+ if (p == NULL)
+ /* This is the first thing in the chain. */
+ retval = tmp;
+ else
+ p->next = tmp;
+ p = tmp;
+ }
+ p->next = NULL;
+ return retval;
}
-static void
-breakpoints_info (bnum_exp)
- char *bnum_exp;
-{
- int bnum = -1;
+/* Find the bpstat associated with this breakpoint */
- if (bnum_exp)
- bnum = parse_and_eval_address (bnum_exp);
- else if (breakpoint_chain == 0)
- printf_filtered ("No breakpoints.\n");
- else
- printf_filtered ("Breakpoints:\n\
-Num Enb Address Where\n");
+bpstat
+bpstat_find_breakpoint(bsp, breakpoint)
+ bpstat bsp;
+ struct breakpoint *breakpoint;
+{
+ if (bsp == NULL) return NULL;
- breakpoint_1 (bnum);
+ for (;bsp != NULL; bsp = bsp->next) {
+ if (bsp->breakpoint_at == breakpoint) return bsp;
+ }
+ return NULL;
}
-/* Print a message describing any breakpoints set at PC. */
+/* Return the breakpoint number of the first breakpoint we are stopped
+ at. *BSP upon return is a bpstat which points to the remaining
+ breakpoints stopped at (but which is not guaranteed to be good for
+ anything but further calls to bpstat_num).
+ Return 0 if passed a bpstat which does not indicate any breakpoints. */
-static void
-describe_other_breakpoints (pc)
- register CORE_ADDR pc;
+int
+bpstat_num (bsp)
+ bpstat *bsp;
{
- register int others = 0;
- register struct breakpoint *b;
+ struct breakpoint *b;
- ALL_BREAKPOINTS (b)
- if (b->address == pc)
- others++;
- if (others > 0)
+ if ((*bsp) == NULL)
+ return 0; /* No more breakpoint values */
+ else
{
- printf ("Note: breakpoint%s ", (others > 1) ? "s" : "");
- ALL_BREAKPOINTS (b)
- if (b->address == pc)
- {
- others--;
- printf ("%d%s%s ",
- b->number,
- (b->enable == disabled) ? " (disabled)" : "",
- (others > 1) ? "," : ((others == 1) ? " and" : ""));
- }
- printf ("also set at pc 0x%x.\n", pc);
+ b = (*bsp)->breakpoint_at;
+ *bsp = (*bsp)->next;
+ if (b == NULL)
+ return -1; /* breakpoint that's been deleted since */
+ else
+ return b->number; /* We have its number */
}
}
-\f
-/* Set the default place to put a breakpoint
- for the `break' command with no arguments. */
+
+/* Modify BS so that the actions will not be performed. */
void
-set_default_breakpoint (valid, addr, symtab, line)
- int valid;
- CORE_ADDR addr;
- struct symtab *symtab;
- int line;
+bpstat_clear_actions (bs)
+ bpstat bs;
{
- default_breakpoint_valid = valid;
- default_breakpoint_address = addr;
- default_breakpoint_symtab = symtab;
- default_breakpoint_line = line;
+ for (; bs != NULL; bs = bs->next)
+ {
+ bs->commands = NULL;
+ if (bs->old_val != NULL)
+ {
+ value_free (bs->old_val);
+ bs->old_val = NULL;
+ }
+ }
}
-/* Rescan breakpoints at address ADDRESS,
- marking the first one as "first" and any others as "duplicates".
- This is so that the bpt instruction is only inserted once. */
+/* Stub for cleaning up our state if we error-out of a breakpoint command */
+/* ARGSUSED */
+static void
+cleanup_executing_breakpoints (ignore)
+ int ignore;
+{
+ executing_breakpoint_commands = 0;
+}
+
+/* Execute all the commands associated with all the breakpoints at this
+ location. Any of these commands could cause the process to proceed
+ beyond this point, etc. We look out for such changes by checking
+ the global "breakpoint_proceeded" after each command. */
+
+void
+bpstat_do_actions (bsp)
+ bpstat *bsp;
+{
+ bpstat bs;
+ struct cleanup *old_chain;
+
+ executing_breakpoint_commands = 1;
+ old_chain = make_cleanup (cleanup_executing_breakpoints, 0);
+
+top:
+ bs = *bsp;
+
+ breakpoint_proceeded = 0;
+ for (; bs != NULL; bs = bs->next)
+ {
+ while (bs->commands)
+ {
+ char *line = bs->commands->line;
+ bs->commands = bs->commands->next;
+ execute_command (line, 0);
+ /* If the inferior is proceeded by the command, bomb out now.
+ The bpstat chain has been blown away by wait_for_inferior.
+ But since execution has stopped again, there is a new bpstat
+ to look at, so start over. */
+ if (breakpoint_proceeded)
+ goto top;
+ }
+ }
+
+ executing_breakpoint_commands = 0;
+ discard_cleanups (old_chain);
+}
+
+/* This is the normal print_it function for a bpstat. In the future,
+ much of this logic could (should?) be moved to bpstat_stop_status,
+ by having it set different print_it functions. */
+
+static int
+print_it_normal (bs)
+ bpstat bs;
+{
+ /* bs->breakpoint_at can be NULL if it was a momentary breakpoint
+ which has since been deleted. */
+ if (bs->breakpoint_at == NULL
+ || (bs->breakpoint_at->type != bp_breakpoint
+ && bs->breakpoint_at->type != bp_watchpoint))
+ return 0;
+
+ if (bs->breakpoint_at->type == bp_breakpoint)
+ {
+ /* I think the user probably only wants to see one breakpoint
+ number, not all of them. */
+ printf_filtered ("\nBreakpoint %d, ", bs->breakpoint_at->number);
+ return 0;
+ }
+
+ if (bs->old_val != NULL)
+ {
+ printf_filtered ("\nWatchpoint %d, ", bs->breakpoint_at->number);
+ print_expression (bs->breakpoint_at->exp, gdb_stdout);
+ printf_filtered ("\nOld value = ");
+ value_print (bs->old_val, gdb_stdout, 0, Val_pretty_default);
+ printf_filtered ("\nNew value = ");
+ value_print (bs->breakpoint_at->val, gdb_stdout, 0,
+ Val_pretty_default);
+ printf_filtered ("\n");
+ value_free (bs->old_val);
+ bs->old_val = NULL;
+ return 0;
+ }
+ /* We can't deal with it. Maybe another member of the bpstat chain can. */
+ return -1;
+}
+
+/* Print a message indicating what happened. Returns nonzero to
+ say that only the source line should be printed after this (zero
+ return means print the frame as well as the source line). */
+/* Currently we always return zero. */
+int
+bpstat_print (bs)
+ bpstat bs;
+{
+ int val;
+
+ if (bs == NULL)
+ return 0;
+
+ val = (*bs->print_it) (bs);
+ if (val >= 0)
+ return val;
+
+ /* Maybe another breakpoint in the chain caused us to stop.
+ (Currently all watchpoints go on the bpstat whether hit or
+ not. That probably could (should) be changed, provided care is taken
+ with respect to bpstat_explains_signal). */
+ if (bs->next)
+ return bpstat_print (bs->next);
+
+ /* We reached the end of the chain without printing anything. */
+ return 0;
+}
+
+/* Evaluate the expression EXP and return 1 if value is zero.
+ This is used inside a catch_errors to evaluate the breakpoint condition.
+ The argument is a "struct expression *" that has been cast to char * to
+ make it pass through catch_errors. */
+
+static int
+breakpoint_cond_eval (exp)
+ char *exp;
+{
+ return !value_true (evaluate_expression ((struct expression *)exp));
+}
+
+/* Allocate a new bpstat and chain it to the current one. */
+
+static bpstat
+bpstat_alloc (b, cbs)
+ register struct breakpoint *b;
+ bpstat cbs; /* Current "bs" value */
+{
+ bpstat bs;
+
+ bs = (bpstat) xmalloc (sizeof (*bs));
+ cbs->next = bs;
+ bs->breakpoint_at = b;
+ /* If the condition is false, etc., don't do the commands. */
+ bs->commands = NULL;
+ bs->old_val = NULL;
+ bs->print_it = print_it_normal;
+ return bs;
+}
+\f
+/* Return the frame which we can use to evaluate the expression
+ whose valid block is valid_block, or NULL if not in scope.
+
+ This whole concept is probably not the way to do things (it is incredibly
+ slow being the main reason, not to mention fragile (e.g. the sparc
+ frame pointer being fetched as 0 bug causes it to stop)). Instead,
+ introduce a version of "struct frame" which survives over calls to the
+ inferior, but which is better than FRAME_ADDR in the sense that it lets
+ us evaluate expressions relative to that frame (on some machines, it
+ can just be a FRAME_ADDR). Save one of those instead of (or in addition
+ to) the exp_valid_block, and then use it to evaluate the watchpoint
+ expression, with no need to do all this backtracing every time.
+
+ Or better yet, what if it just copied the struct frame and its next
+ frame? Off the top of my head, I would think that would work
+ because things like (a29k) rsize and msize, or (sparc) bottom just
+ depend on the frame, and aren't going to be different just because
+ the inferior has done something. Trying to recalculate them
+ strikes me as a lot of work, possibly even impossible. Saving the
+ next frame is needed at least on a29k, where get_saved_register
+ uses fi->next->saved_msp. For figuring out whether that frame is
+ still on the stack, I guess this needs to be machine-specific (e.g.
+ a29k) but I think
+
+ read_fp () INNER_THAN watchpoint_frame->frame
+
+ would generally work.
+
+ Of course the scope of the expression could be less than a whole
+ function; perhaps if the innermost frame is the one which the
+ watchpoint is relative to (another machine-specific thing, usually
+
+ FRAMELESS_FUNCTION_INVOCATION (get_current_frame(), fromleaf)
+ read_fp () == wp_frame->frame
+ && !fromleaf
+
+ ), *then* it could do a
+
+ contained_in (get_current_block (), wp->exp_valid_block).
+
+ */
+
+FRAME
+within_scope (valid_block)
+ struct block *valid_block;
+{
+ FRAME fr = get_current_frame ();
+ struct frame_info *fi = get_frame_info (fr);
+ CORE_ADDR func_start;
+
+ /* If caller_pc_valid is true, we are stepping through
+ a function prologue, which is bounded by callee_func_start
+ (inclusive) and callee_prologue_end (exclusive).
+ caller_pc is the pc of the caller.
+
+ Yes, this is hairy. */
+ static int caller_pc_valid = 0;
+ static CORE_ADDR caller_pc;
+ static CORE_ADDR callee_func_start;
+ static CORE_ADDR callee_prologue_end;
+
+ find_pc_partial_function (fi->pc, (PTR)NULL, &func_start, (CORE_ADDR *)NULL);
+ func_start += FUNCTION_START_OFFSET;
+ if (fi->pc == func_start)
+ {
+ /* We just called a function. The only other case I
+ can think of where the pc would equal the pc of the
+ start of a function is a frameless function (i.e.
+ no prologue) where we branch back to the start
+ of the function. In that case, SKIP_PROLOGUE won't
+ find one, and we'll clear caller_pc_valid a few lines
+ down. */
+ caller_pc_valid = 1;
+ caller_pc = SAVED_PC_AFTER_CALL (fr);
+ callee_func_start = func_start;
+ SKIP_PROLOGUE (func_start);
+ callee_prologue_end = func_start;
+ }
+ if (caller_pc_valid)
+ {
+ if (fi->pc < callee_func_start
+ || fi->pc >= callee_prologue_end)
+ caller_pc_valid = 0;
+ }
+
+ if (contained_in (block_for_pc (caller_pc_valid
+ ? caller_pc
+ : fi->pc),
+ valid_block))
+ {
+ return fr;
+ }
+ fr = get_prev_frame (fr);
+
+ /* If any active frame is in the exp_valid_block, then it's
+ OK. Note that this might not be the same invocation of
+ the exp_valid_block that we were watching a little while
+ ago, or the same one as when the watchpoint was set (e.g.
+ we are watching a local variable in a recursive function.
+ When we return from a recursive invocation, then we are
+ suddenly watching a different instance of the variable).
+
+ At least for now I am going to consider this a feature. */
+ for (; fr != NULL; fr = get_prev_frame (fr))
+ {
+ fi = get_frame_info (fr);
+ if (contained_in (block_for_pc (fi->pc),
+ valid_block))
+ {
+ return fr;
+ }
+ }
+ return NULL;
+}
+
+/* Possible return values for watchpoint_check (this can't be an enum
+ because of check_errors). */
+/* The watchpoint has been disabled. */
+#define WP_DISABLED 1
+/* The value has changed. */
+#define WP_VALUE_CHANGED 2
+/* The value has not changed. */
+#define WP_VALUE_NOT_CHANGED 3
+
+/* Check watchpoint condition. */
+static int
+watchpoint_check (p)
+ char *p;
+{
+ bpstat bs = (bpstat) p;
+ FRAME fr;
+
+ int within_current_scope;
+ if (bs->breakpoint_at->exp_valid_block == NULL)
+ within_current_scope = 1;
+ else
+ {
+ fr = within_scope (bs->breakpoint_at->exp_valid_block);
+ within_current_scope = fr != NULL;
+ if (within_current_scope)
+ /* If we end up stopping, the current frame will get selected
+ in normal_stop. So this call to select_frame won't affect
+ the user. */
+ select_frame (fr, -1);
+ }
+
+ if (within_current_scope)
+ {
+ /* We use value_{,free_to_}mark because it could be a
+ *long* time before we return to the command level and
+ call free_all_values. We can't call free_all_values because
+ we might be in the middle of evaluating a function call. */
+
+ value mark = value_mark ();
+ value new_val = evaluate_expression (bs->breakpoint_at->exp);
+ if (!value_equal (bs->breakpoint_at->val, new_val))
+ {
+ release_value (new_val);
+ value_free_to_mark (mark);
+ bs->old_val = bs->breakpoint_at->val;
+ bs->breakpoint_at->val = new_val;
+ /* We will stop here */
+ return WP_VALUE_CHANGED;
+ }
+ else
+ {
+ /* Nothing changed, don't do anything. */
+ value_free_to_mark (mark);
+ /* We won't stop here */
+ return WP_VALUE_NOT_CHANGED;
+ }
+ }
+ else
+ {
+ /* This seems like the only logical thing to do because
+ if we temporarily ignored the watchpoint, then when
+ we reenter the block in which it is valid it contains
+ garbage (in the case of a function, it may have two
+ garbage values, one before and one after the prologue).
+ So we can't even detect the first assignment to it and
+ watch after that (since the garbage may or may not equal
+ the first value assigned). */
+ bs->breakpoint_at->enable = disabled;
+ printf_filtered ("\
+Watchpoint %d disabled because the program has left the block in\n\
+which its expression is valid.\n", bs->breakpoint_at->number);
+ return WP_DISABLED;
+ }
+}
+
+/* This is used when everything which needs to be printed has
+ already been printed. But we still want to print the frame. */
+static int
+print_it_done (bs)
+ bpstat bs;
+{
+ return 0;
+}
+
+/* This is used when nothing should be printed for this bpstat entry. */
+
+static int
+print_it_noop (bs)
+ bpstat bs;
+{
+ return -1;
+}
+
+/* Get a bpstat associated with having just stopped at address *PC
+ and frame address FRAME_ADDRESS. Update *PC to point at the
+ breakpoint (if we hit a breakpoint). NOT_A_BREAKPOINT is nonzero
+ if this is known to not be a real breakpoint (it could still be a
+ watchpoint, though). */
+
+/* Determine whether we stopped at a breakpoint, etc, or whether we
+ don't understand this stop. Result is a chain of bpstat's such that:
+
+ if we don't understand the stop, the result is a null pointer.
+
+ if we understand why we stopped, the result is not null.
+
+ Each element of the chain refers to a particular breakpoint or
+ watchpoint at which we have stopped. (We may have stopped for
+ several reasons concurrently.)
+
+ Each element of the chain has valid next, breakpoint_at,
+ commands, FIXME??? fields.
+
+ */
+
+bpstat
+bpstat_stop_status (pc, frame_address, not_a_breakpoint)
+ CORE_ADDR *pc;
+ FRAME_ADDR frame_address;
+ int not_a_breakpoint;
+{
+ register struct breakpoint *b;
+ CORE_ADDR bp_addr;
+#if DECR_PC_AFTER_BREAK != 0 || defined (SHIFT_INST_REGS)
+ /* True if we've hit a breakpoint (as opposed to a watchpoint). */
+ int real_breakpoint = 0;
+#endif
+ /* Root of the chain of bpstat's */
+ struct bpstat root_bs[1];
+ /* Pointer to the last thing in the chain currently. */
+ bpstat bs = root_bs;
+
+ /* Get the address where the breakpoint would have been. */
+ bp_addr = *pc - DECR_PC_AFTER_BREAK;
+
+ ALL_BREAKPOINTS (b)
+ {
+ if (b->enable == disabled)
+ continue;
+
+ if (b->type != bp_watchpoint && b->address != bp_addr)
+ continue;
+
+ if (b->type != bp_watchpoint && not_a_breakpoint)
+ continue;
+
+ /* Come here if it's a watchpoint, or if the break address matches */
+
+ bs = bpstat_alloc (b, bs); /* Alloc a bpstat to explain stop */
+
+ bs->stop = 1;
+ bs->print = 1;
+
+ if (b->type == bp_watchpoint)
+ {
+ static char message1[] =
+ "Error evaluating expression for watchpoint %d\n";
+ char message[sizeof (message1) + 30 /* slop */];
+ sprintf (message, message1, b->number);
+ switch (catch_errors (watchpoint_check, (char *) bs, message,
+ RETURN_MASK_ALL))
+ {
+ case WP_DISABLED:
+ /* We've already printed what needs to be printed. */
+ bs->print_it = print_it_done;
+ /* Stop. */
+ break;
+ case WP_VALUE_CHANGED:
+ /* Stop. */
+ break;
+ case WP_VALUE_NOT_CHANGED:
+ /* Don't stop. */
+ bs->print_it = print_it_noop;
+ bs->stop = 0;
+ continue;
+ default:
+ /* Can't happen. */
+ /* FALLTHROUGH */
+ case 0:
+ /* Error from catch_errors. */
+ b->enable = disabled;
+ printf_filtered ("Watchpoint %d disabled.\n", b->number);
+ /* We've already printed what needs to be printed. */
+ bs->print_it = print_it_done;
+ /* Stop. */
+ break;
+ }
+ }
+#if DECR_PC_AFTER_BREAK != 0 || defined (SHIFT_INST_REGS)
+ else
+ real_breakpoint = 1;
+#endif
+
+ if (b->frame && b->frame != frame_address)
+ bs->stop = 0;
+ else
+ {
+ int value_is_zero = 0;
+
+ if (b->cond)
+ {
+ /* Need to select the frame, with all that implies
+ so that the conditions will have the right context. */
+ select_frame (get_current_frame (), 0);
+ value_is_zero
+ = catch_errors (breakpoint_cond_eval, (char *)(b->cond),
+ "Error in testing breakpoint condition:\n",
+ RETURN_MASK_ALL);
+ /* FIXME-someday, should give breakpoint # */
+ free_all_values ();
+ }
+ if (b->cond && value_is_zero)
+ {
+ bs->stop = 0;
+ }
+ else if (b->ignore_count > 0)
+ {
+ b->ignore_count--;
+ bs->stop = 0;
+ }
+ else
+ {
+ /* We will stop here */
+ if (b->disposition == disable)
+ b->enable = disabled;
+ bs->commands = b->commands;
+ if (b->silent)
+ bs->print = 0;
+ if (bs->commands && STREQ ("silent", bs->commands->line))
+ {
+ bs->commands = bs->commands->next;
+ bs->print = 0;
+ }
+ }
+ }
+ /* Print nothing for this entry if we dont stop or if we dont print. */
+ if (bs->stop == 0 || bs->print == 0)
+ bs->print_it = print_it_noop;
+ }
+
+ bs->next = NULL; /* Terminate the chain */
+ bs = root_bs->next; /* Re-grab the head of the chain */
+#if DECR_PC_AFTER_BREAK != 0 || defined (SHIFT_INST_REGS)
+ if (bs)
+ {
+ if (real_breakpoint)
+ {
+ *pc = bp_addr;
+#if defined (SHIFT_INST_REGS)
+ SHIFT_INST_REGS();
+#else /* No SHIFT_INST_REGS. */
+ write_pc (bp_addr);
+#endif /* No SHIFT_INST_REGS. */
+ }
+ }
+#endif /* DECR_PC_AFTER_BREAK != 0. */
+ return bs;
+}
+\f
+/* Tell what to do about this bpstat. */
+struct bpstat_what
+bpstat_what (bs)
+ bpstat bs;
+{
+ /* Classify each bpstat as one of the following. */
+ enum class {
+ /* This bpstat element has no effect on the main_action. */
+ no_effect = 0,
+
+ /* There was a watchpoint, stop but don't print. */
+ wp_silent,
+
+ /* There was a watchpoint, stop and print. */
+ wp_noisy,
+
+ /* There was a breakpoint but we're not stopping. */
+ bp_nostop,
+
+ /* There was a breakpoint, stop but don't print. */
+ bp_silent,
+
+ /* There was a breakpoint, stop and print. */
+ bp_noisy,
+
+ /* We hit the longjmp breakpoint. */
+ long_jump,
+
+ /* We hit the longjmp_resume breakpoint. */
+ long_resume,
+
+ /* We hit the step_resume breakpoint. */
+ step_resume,
+
+ /* This is just used to count how many enums there are. */
+ class_last
+ };
+
+ /* Here is the table which drives this routine. So that we can
+ format it pretty, we define some abbreviations for the
+ enum bpstat_what codes. */
+#define keep_c BPSTAT_WHAT_KEEP_CHECKING
+#define stop_s BPSTAT_WHAT_STOP_SILENT
+#define stop_n BPSTAT_WHAT_STOP_NOISY
+#define single BPSTAT_WHAT_SINGLE
+#define setlr BPSTAT_WHAT_SET_LONGJMP_RESUME
+#define clrlr BPSTAT_WHAT_CLEAR_LONGJMP_RESUME
+#define clrlrs BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE
+#define sr BPSTAT_WHAT_STEP_RESUME
+
+/* "Can't happen." Might want to print an error message.
+ abort() is not out of the question, but chances are GDB is just
+ a bit confused, not unusable. */
+#define err BPSTAT_WHAT_STOP_NOISY
+
+ /* Given an old action and a class, come up with a new action. */
+ /* One interesting property of this table is that wp_silent is the same
+ as bp_silent and wp_noisy is the same as bp_noisy. That is because
+ after stopping, the check for whether to step over a breakpoint
+ (BPSTAT_WHAT_SINGLE type stuff) is handled in proceed() without
+ reference to how we stopped. We retain separate wp_silent and bp_silent
+ codes in case we want to change that someday. */
+
+ /* step_resume entries: a step resume breakpoint overrides another
+ breakpoint of signal handling (see comment in wait_for_inferior
+ at first IN_SIGTRAMP where we set the step_resume breakpoint). */
+
+ static const enum bpstat_what_main_action
+ table[(int)class_last][(int)BPSTAT_WHAT_LAST] =
+ {
+ /* old action */
+ /* keep_c stop_s stop_n single setlr clrlr clrlrs sr */
+
+/*no_effect*/ {keep_c, stop_s, stop_n, single, setlr , clrlr , clrlrs, sr},
+/*wp_silent*/ {stop_s, stop_s, stop_n, stop_s, stop_s, stop_s, stop_s, sr},
+/*wp_noisy*/ {stop_n, stop_n, stop_n, stop_n, stop_n, stop_n, stop_n, sr},
+/*bp_nostop*/ {single, stop_s, stop_n, single, setlr , clrlrs, clrlrs, sr},
+/*bp_silent*/ {stop_s, stop_s, stop_n, stop_s, stop_s, stop_s, stop_s, sr},
+/*bp_noisy*/ {stop_n, stop_n, stop_n, stop_n, stop_n, stop_n, stop_n, sr},
+/*long_jump*/ {setlr , stop_s, stop_n, setlr , err , err , err , sr},
+/*long_resume*/ {clrlr , stop_s, stop_n, clrlrs, err , err , err , sr},
+/*step_resume*/ {sr , sr , sr , sr , sr , sr , sr , sr}
+ };
+#undef keep_c
+#undef stop_s
+#undef stop_n
+#undef single
+#undef setlr
+#undef clrlr
+#undef clrlrs
+#undef err
+ enum bpstat_what_main_action current_action = BPSTAT_WHAT_KEEP_CHECKING;
+ struct bpstat_what retval;
+
+ retval.call_dummy = 0;
+ for (; bs != NULL; bs = bs->next)
+ {
+ enum class bs_class = no_effect;
+ if (bs->breakpoint_at == NULL)
+ /* I suspect this can happen if it was a momentary breakpoint
+ which has since been deleted. */
+ continue;
+ switch (bs->breakpoint_at->type)
+ {
+ case bp_breakpoint:
+ case bp_until:
+ case bp_finish:
+ if (bs->stop)
+ {
+ if (bs->print)
+ bs_class = bp_noisy;
+ else
+ bs_class = bp_silent;
+ }
+ else
+ bs_class = bp_nostop;
+ break;
+ case bp_watchpoint:
+ if (bs->stop)
+ {
+ if (bs->print)
+ bs_class = wp_noisy;
+ else
+ bs_class = wp_silent;
+ }
+ else
+ /* There was a watchpoint, but we're not stopping. This requires
+ no further action. */
+ bs_class = no_effect;
+ break;
+ case bp_longjmp:
+ bs_class = long_jump;
+ break;
+ case bp_longjmp_resume:
+ bs_class = long_resume;
+ break;
+ case bp_step_resume:
+#if 0
+ /* Need to temporarily disable this until we can fix the bug
+ with nexting over a breakpoint with ->stop clear causing
+ an infinite loop. For now, treat the breakpoint as having
+ been hit even if the frame is wrong. */
+ if (bs->stop)
+ {
+#endif
+ bs_class = step_resume;
+#if 0
+ }
+ else
+ /* It is for the wrong frame. */
+ bs_class = bp_nostop;
+#endif
+ break;
+ case bp_call_dummy:
+ /* Make sure the action is stop (silent or noisy), so infrun.c
+ pops the dummy frame. */
+ bs_class = bp_silent;
+ retval.call_dummy = 1;
+ break;
+ }
+ current_action = table[(int)bs_class][(int)current_action];
+ }
+ retval.main_action = current_action;
+ return retval;
+}
+
+/* Nonzero if we should step constantly (e.g. watchpoints on machines
+ without hardware support). This isn't related to a specific bpstat,
+ just to things like whether watchpoints are set. */
+
+int
+bpstat_should_step ()
+{
+ struct breakpoint *b;
+ ALL_BREAKPOINTS (b)
+ if (b->enable == enabled && b->type == bp_watchpoint)
+ return 1;
+ return 0;
+}
+\f
+/* Print information on breakpoint number BNUM, or -1 if all.
+ If WATCHPOINTS is zero, process only breakpoints; if WATCHPOINTS
+ is nonzero, process only watchpoints. */
static void
-check_duplicates (address)
- CORE_ADDR address;
+breakpoint_1 (bnum, allflag)
+ int bnum;
+ int allflag;
{
register struct breakpoint *b;
- register int count = 0;
+ register struct command_line *l;
+ register struct symbol *sym;
+ CORE_ADDR last_addr = (CORE_ADDR)-1;
+ int found_a_breakpoint = 0;
+ static char *bptypes[] = {"breakpoint", "until", "finish", "watchpoint",
+ "longjmp", "longjmp resume", "step resume",
+ "call dummy" };
+ static char *bpdisps[] = {"del", "dis", "keep"};
+ static char bpenables[] = "ny";
+ char wrap_indent[80];
ALL_BREAKPOINTS (b)
- if (b->enable != disabled && b->address == address)
+ if (bnum == -1
+ || bnum == b->number)
{
- count++;
- b->duplicate = count > 1;
+/* We only print out user settable breakpoints unless the allflag is set. */
+ if (!allflag
+ && b->type != bp_breakpoint
+ && b->type != bp_watchpoint)
+ continue;
+
+ if (!found_a_breakpoint++)
+ printf_filtered ("Num Type Disp Enb %sWhat\n",
+ addressprint ? "Address " : "");
+
+ printf_filtered ("%-3d %-14s %-4s %-3c ",
+ b->number,
+ bptypes[(int)b->type],
+ bpdisps[(int)b->disposition],
+ bpenables[(int)b->enable]);
+ strcpy (wrap_indent, " ");
+ if (addressprint)
+ strcat (wrap_indent, " ");
+ switch (b->type)
+ {
+ case bp_watchpoint:
+ print_expression (b->exp, gdb_stdout);
+ break;
+
+ case bp_breakpoint:
+ case bp_until:
+ case bp_finish:
+ case bp_longjmp:
+ case bp_longjmp_resume:
+ case bp_step_resume:
+ case bp_call_dummy:
+ if (addressprint)
+ printf_filtered ("%s ", local_hex_string_custom ((unsigned long) b->address, "08l"));
+
+ last_addr = b->address;
+ if (b->source_file)
+ {
+ sym = find_pc_function (b->address);
+ if (sym)
+ {
+ fputs_filtered ("in ", gdb_stdout);
+ fputs_filtered (SYMBOL_SOURCE_NAME (sym), gdb_stdout);
+ wrap_here (wrap_indent);
+ fputs_filtered (" at ", gdb_stdout);
+ }
+ fputs_filtered (b->source_file, gdb_stdout);
+ printf_filtered (":%d", b->line_number);
+ }
+ else
+ print_address_symbolic (b->address, gdb_stdout, demangle, " ");
+ break;
+ }
+
+ printf_filtered ("\n");
+
+ if (b->frame)
+ {
+ printf_filtered ("\tstop only in stack frame at ");
+ print_address_numeric (b->frame, gdb_stdout);
+ printf_filtered ("\n");
+ if (b->cond)
+ {
+ printf_filtered ("\tstop only if ");
+ print_expression (b->cond, gdb_stdout);
+ printf_filtered ("\n");
+ }
+ if (b->ignore_count)
+ printf_filtered ("\tignore next %d hits\n", b->ignore_count);
+ if ((l = b->commands))
+ while (l)
+ {
+ fputs_filtered ("\t", gdb_stdout);
+ fputs_filtered (l->line, gdb_stdout);
+ fputs_filtered ("\n", gdb_stdout);
+ l = l->next;
+ }
}
+
+ if (!found_a_breakpoint)
+ {
+ if (bnum == -1)
+ printf_filtered ("No breakpoints or watchpoints.\n");
+ else
+ printf_filtered ("No breakpoint or watchpoint number %d.\n", bnum);
+ }
+ else
+ /* Compare against (CORE_ADDR)-1 in case some compiler decides
+ that a comparison of an unsigned with -1 is always false. */
+ if (last_addr != (CORE_ADDR)-1)
+ set_next_address (last_addr);
}
-/* Low level routine to set a breakpoint.
- Takes as args the three things that every breakpoint must have.
- Returns the breakpoint object so caller can set other things.
- Does not set the breakpoint number!
- Does not print anything. */
+/* ARGSUSED */
+static void
+breakpoints_info (bnum_exp, from_tty)
+ char *bnum_exp;
+ int from_tty;
+{
+ int bnum = -1;
-static struct breakpoint *
-set_raw_breakpoint (sal)
- struct symtab_and_line sal;
+ if (bnum_exp)
+ bnum = parse_and_eval_address (bnum_exp);
+
+ breakpoint_1 (bnum, 0);
+}
+
+#if MAINTENANCE_CMDS
+
+/* ARGSUSED */
+static void
+maintenance_info_breakpoints (bnum_exp, from_tty)
+ char *bnum_exp;
+ int from_tty;
{
- register struct breakpoint *b, *b1;
+ int bnum = -1;
- b = (struct breakpoint *) xmalloc (sizeof (struct breakpoint));
- bzero (b, sizeof *b);
- b->address = sal.pc;
- b->symtab = sal.symtab;
- b->line_number = sal.line;
- b->enable = enabled;
- b->next = 0;
- b->silent = 0;
+ if (bnum_exp)
+ bnum = parse_and_eval_address (bnum_exp);
- /* Add this breakpoint to the end of the chain
- so that a list of breakpoints will come out in order
- of increasing numbers. */
+ breakpoint_1 (bnum, 1);
+}
- b1 = breakpoint_chain;
+#endif
+
+/* Print a message describing any breakpoints set at PC. */
+
+static void
+describe_other_breakpoints (pc)
+ register CORE_ADDR pc;
+{
+ register int others = 0;
+ register struct breakpoint *b;
+
+ ALL_BREAKPOINTS (b)
+ if (b->address == pc)
+ others++;
+ if (others > 0)
+ {
+ printf_filtered ("Note: breakpoint%s ", (others > 1) ? "s" : "");
+ ALL_BREAKPOINTS (b)
+ if (b->address == pc)
+ {
+ others--;
+ printf_filtered
+ ("%d%s%s ",
+ b->number,
+ (b->enable == disabled) ? " (disabled)" : "",
+ (others > 1) ? "," : ((others == 1) ? " and" : ""));
+ }
+ printf_filtered ("also set at pc ");
+ print_address_numeric (pc, gdb_stdout);
+ printf_filtered (".\n");
+ }
+}
+\f
+/* Set the default place to put a breakpoint
+ for the `break' command with no arguments. */
+
+void
+set_default_breakpoint (valid, addr, symtab, line)
+ int valid;
+ CORE_ADDR addr;
+ struct symtab *symtab;
+ int line;
+{
+ default_breakpoint_valid = valid;
+ default_breakpoint_address = addr;
+ default_breakpoint_symtab = symtab;
+ default_breakpoint_line = line;
+}
+
+/* Rescan breakpoints at address ADDRESS,
+ marking the first one as "first" and any others as "duplicates".
+ This is so that the bpt instruction is only inserted once. */
+
+static void
+check_duplicates (address)
+ CORE_ADDR address;
+{
+ register struct breakpoint *b;
+ register int count = 0;
+
+ if (address == 0) /* Watchpoints are uninteresting */
+ return;
+
+ ALL_BREAKPOINTS (b)
+ if (b->enable != disabled && b->address == address)
+ {
+ count++;
+ b->duplicate = count > 1;
+ }
+}
+
+/* Low level routine to set a breakpoint.
+ Takes as args the three things that every breakpoint must have.
+ Returns the breakpoint object so caller can set other things.
+ Does not set the breakpoint number!
+ Does not print anything.
+
+ ==> This routine should not be called if there is a chance of later
+ error(); otherwise it leaves a bogus breakpoint on the chain. Validate
+ your arguments BEFORE calling this routine! */
+
+static struct breakpoint *
+set_raw_breakpoint (sal)
+ struct symtab_and_line sal;
+{
+ register struct breakpoint *b, *b1;
+
+ b = (struct breakpoint *) xmalloc (sizeof (struct breakpoint));
+ memset (b, 0, sizeof (*b));
+ b->address = sal.pc;
+ if (sal.symtab == NULL)
+ b->source_file = NULL;
+ else
+ b->source_file = savestring (sal.symtab->filename,
+ strlen (sal.symtab->filename));
+ b->thread = -1;
+ b->line_number = sal.line;
+ b->enable = enabled;
+ b->next = 0;
+ b->silent = 0;
+ b->ignore_count = 0;
+ b->commands = NULL;
+ b->frame = 0;
+
+ /* Add this breakpoint to the end of the chain
+ so that a list of breakpoints will come out in order
+ of increasing numbers. */
+
+ b1 = breakpoint_chain;
if (b1 == 0)
breakpoint_chain = b;
else
b1 = b1->next;
b1->next = b;
}
-
- check_duplicates (sal.pc);
-
- return b;
+
+ check_duplicates (sal.pc);
+
+ return b;
+}
+
+static void
+create_longjmp_breakpoint(func_name)
+ char *func_name;
+{
+ struct symtab_and_line sal;
+ struct breakpoint *b;
+ static int internal_breakpoint_number = -1;
+
+ if (func_name != NULL)
+ {
+ struct minimal_symbol *m;
+
+ m = lookup_minimal_symbol(func_name, (struct objfile *)NULL);
+ if (m)
+ sal.pc = SYMBOL_VALUE_ADDRESS (m);
+ else
+ return;
+ }
+ else
+ sal.pc = 0;
+
+ sal.symtab = NULL;
+ sal.line = 0;
+
+ b = set_raw_breakpoint(sal);
+ if (!b) return;
+
+ b->type = func_name != NULL ? bp_longjmp : bp_longjmp_resume;
+ b->disposition = donttouch;
+ b->enable = disabled;
+ b->silent = 1;
+ if (func_name)
+ b->addr_string = strsave(func_name);
+ b->number = internal_breakpoint_number--;
+}
+
+/* Call this routine when stepping and nexting to enable a breakpoint if we do
+ a longjmp(). When we hit that breakpoint, call
+ set_longjmp_resume_breakpoint() to figure out where we are going. */
+
+void
+enable_longjmp_breakpoint()
+{
+ register struct breakpoint *b;
+
+ ALL_BREAKPOINTS (b)
+ if (b->type == bp_longjmp)
+ {
+ b->enable = enabled;
+ check_duplicates (b->address);
+ }
+}
+
+void
+disable_longjmp_breakpoint()
+{
+ register struct breakpoint *b;
+
+ ALL_BREAKPOINTS (b)
+ if ( b->type == bp_longjmp
+ || b->type == bp_longjmp_resume)
+ {
+ b->enable = disabled;
+ check_duplicates (b->address);
+ }
+}
+
+/* Call this after hitting the longjmp() breakpoint. Use this to set a new
+ breakpoint at the target of the jmp_buf.
+
+ FIXME - This ought to be done by setting a temporary breakpoint that gets
+ deleted automatically...
+*/
+
+void
+set_longjmp_resume_breakpoint(pc, frame)
+ CORE_ADDR pc;
+ FRAME frame;
+{
+ register struct breakpoint *b;
+
+ ALL_BREAKPOINTS (b)
+ if (b->type == bp_longjmp_resume)
+ {
+ b->address = pc;
+ b->enable = enabled;
+ if (frame != NULL)
+ b->frame = FRAME_FP(frame);
+ else
+ b->frame = 0;
+ check_duplicates (b->address);
+ return;
+ }
+}
+
+/* Set a breakpoint that will evaporate an end of command
+ at address specified by SAL.
+ Restrict it to frame FRAME if FRAME is nonzero. */
+
+struct breakpoint *
+set_momentary_breakpoint (sal, frame, type)
+ struct symtab_and_line sal;
+ FRAME frame;
+ enum bptype type;
+{
+ register struct breakpoint *b;
+ b = set_raw_breakpoint (sal);
+ b->type = type;
+ b->enable = enabled;
+ b->disposition = donttouch;
+ b->frame = (frame ? FRAME_FP (frame) : 0);
+ return b;
+}
+
+#if 0
+void
+clear_momentary_breakpoints ()
+{
+ register struct breakpoint *b;
+ ALL_BREAKPOINTS (b)
+ if (b->disposition == delete)
+ {
+ delete_breakpoint (b);
+ break;
+ }
+}
+#endif
+\f
+/* Tell the user we have just set a breakpoint B. */
+static void
+mention (b)
+ struct breakpoint *b;
+{
+ switch (b->type)
+ {
+ case bp_watchpoint:
+ printf_filtered ("Watchpoint %d: ", b->number);
+ print_expression (b->exp, gdb_stdout);
+ break;
+ case bp_breakpoint:
+ printf_filtered ("Breakpoint %d at ", b->number);
+ print_address_numeric (b->address);
+ if (b->source_file)
+ printf_filtered (": file %s, line %d.",
+ b->source_file, b->line_number);
+ break;
+ case bp_until:
+ case bp_finish:
+ case bp_longjmp:
+ case bp_longjmp_resume:
+ case bp_step_resume:
+ case bp_call_dummy:
+ break;
+ }
+ printf_filtered ("\n");
+}
+
+#if 0
+/* Nobody calls this currently. */
+/* Set a breakpoint from a symtab and line.
+ If TEMPFLAG is nonzero, it is a temporary breakpoint.
+ ADDR_STRING is a malloc'd string holding the name of where we are
+ setting the breakpoint. This is used later to re-set it after the
+ program is relinked and symbols are reloaded.
+ Print the same confirmation messages that the breakpoint command prints. */
+
+void
+set_breakpoint (s, line, tempflag, addr_string)
+ struct symtab *s;
+ int line;
+ int tempflag;
+ char *addr_string;
+{
+ register struct breakpoint *b;
+ struct symtab_and_line sal;
+
+ sal.symtab = s;
+ sal.line = line;
+ sal.pc = 0;
+ resolve_sal_pc (&sal); /* Might error out */
+ describe_other_breakpoints (sal.pc);
+
+ b = set_raw_breakpoint (sal);
+ set_breakpoint_count (breakpoint_count + 1);
+ b->number = breakpoint_count;
+ b->type = bp_breakpoint;
+ b->cond = 0;
+ b->addr_string = addr_string;
+ b->enable = enabled;
+ b->disposition = tempflag ? delete : donttouch;
+
+ mention (b);
+}
+#endif /* 0 */
+\f
+/* Set a breakpoint according to ARG (function, linenum or *address)
+ and make it temporary if TEMPFLAG is nonzero. */
+
+static void
+break_command_1 (arg, tempflag, from_tty)
+ char *arg;
+ int tempflag, from_tty;
+{
+ struct symtabs_and_lines sals;
+ struct symtab_and_line sal;
+ register struct expression *cond = 0;
+ register struct breakpoint *b;
+
+ /* Pointers in arg to the start, and one past the end, of the condition. */
+ char *cond_start = NULL;
+ char *cond_end = NULL;
+ /* Pointers in arg to the start, and one past the end,
+ of the address part. */
+ char *addr_start = NULL;
+ char *addr_end = NULL;
+ struct cleanup *old_chain;
+ struct cleanup *canonical_strings_chain = NULL;
+ char **canonical = (char **)NULL;
+ int i;
+ int thread;
+
+ sals.sals = NULL;
+ sals.nelts = 0;
+
+ sal.line = sal.pc = sal.end = 0;
+ sal.symtab = 0;
+
+ /* If no arg given, or if first arg is 'if ', use the default breakpoint. */
+
+ if (!arg || (arg[0] == 'i' && arg[1] == 'f'
+ && (arg[2] == ' ' || arg[2] == '\t')))
+ {
+ if (default_breakpoint_valid)
+ {
+ sals.sals = (struct symtab_and_line *)
+ xmalloc (sizeof (struct symtab_and_line));
+ sal.pc = default_breakpoint_address;
+ sal.line = default_breakpoint_line;
+ sal.symtab = default_breakpoint_symtab;
+ sals.sals[0] = sal;
+ sals.nelts = 1;
+ }
+ else
+ error ("No default breakpoint address now.");
+ }
+ else
+ {
+ addr_start = arg;
+
+ /* Force almost all breakpoints to be in terms of the
+ current_source_symtab (which is decode_line_1's default). This
+ should produce the results we want almost all of the time while
+ leaving default_breakpoint_* alone. */
+ if (default_breakpoint_valid
+ && (!current_source_symtab
+ || (arg && (*arg == '+' || *arg == '-'))))
+ sals = decode_line_1 (&arg, 1, default_breakpoint_symtab,
+ default_breakpoint_line, &canonical);
+ else
+ sals = decode_line_1 (&arg, 1, (struct symtab *)NULL, 0, &canonical);
+
+ addr_end = arg;
+ }
+
+ if (! sals.nelts)
+ return;
+
+ /* Make sure that all storage allocated in decode_line_1 gets freed in case
+ the following `for' loop errors out. */
+ old_chain = make_cleanup (free, sals.sals);
+ if (canonical != (char **)NULL)
+ {
+ make_cleanup (free, canonical);
+ canonical_strings_chain = make_cleanup (null_cleanup, 0);
+ for (i = 0; i < sals.nelts; i++)
+ {
+ if (canonical[i] != NULL)
+ make_cleanup (free, canonical[i]);
+ }
+ }
+
+ thread = -1; /* No specific thread yet */
+
+ /* Resolve all line numbers to PC's, and verify that conditions
+ can be parsed, before setting any breakpoints. */
+ for (i = 0; i < sals.nelts; i++)
+ {
+ char *tok, *end_tok;
+ int toklen;
+
+ resolve_sal_pc (&sals.sals[i]);
+
+ tok = arg;
+
+ while (tok && *tok)
+ {
+ while (*tok == ' ' || *tok == '\t')
+ tok++;
+
+ end_tok = tok;
+
+ while (*end_tok != ' ' && *end_tok != '\t' && *end_tok != '\000')
+ end_tok++;
+
+ toklen = end_tok - tok;
+
+ if (toklen >= 1 && strncmp (tok, "if", toklen) == 0)
+ {
+ tok = cond_start = end_tok + 1;
+ cond = parse_exp_1 (&tok, block_for_pc (sals.sals[i].pc), 0);
+ cond_end = tok;
+ }
+ else if (toklen >= 1 && strncmp (tok, "thread", toklen) == 0)
+ {
+ char *tmptok;
+
+ tok = end_tok + 1;
+ tmptok = tok;
+ thread = strtol (tok, &tok, 0);
+ if (tok == tmptok)
+ error ("Junk after thread keyword.");
+ if (!valid_thread_id (thread))
+ error ("Unknown thread %d\n", thread);
+ }
+ else
+ error ("Junk at end of arguments.");
+ }
+ }
+
+ /* Remove the canonical strings from the cleanup, they are needed below. */
+ if (canonical != (char **)NULL)
+ discard_cleanups (canonical_strings_chain);
+
+ /* Now set all the breakpoints. */
+ for (i = 0; i < sals.nelts; i++)
+ {
+ sal = sals.sals[i];
+
+ if (from_tty)
+ describe_other_breakpoints (sal.pc);
+
+ b = set_raw_breakpoint (sal);
+ set_breakpoint_count (breakpoint_count + 1);
+ b->number = breakpoint_count;
+ b->type = bp_breakpoint;
+ b->cond = cond;
+ b->thread = thread;
+
+ /* If a canonical line spec is needed use that instead of the
+ command string. */
+ if (canonical != (char **)NULL && canonical[i] != NULL)
+ b->addr_string = canonical[i];
+ else if (addr_start)
+ b->addr_string = savestring (addr_start, addr_end - addr_start);
+ if (cond_start)
+ b->cond_string = savestring (cond_start, cond_end - cond_start);
+
+ b->enable = enabled;
+ b->disposition = tempflag ? delete : donttouch;
+
+ mention (b);
+ }
+
+ if (sals.nelts > 1)
+ {
+ printf_filtered ("Multiple breakpoints were set.\n");
+ printf_filtered ("Use the \"delete\" command to delete unwanted breakpoints.\n");
+ }
+ do_cleanups (old_chain);
+}
+
+/* Helper function for break_command_1 and disassemble_command. */
+
+void
+resolve_sal_pc (sal)
+ struct symtab_and_line *sal;
+{
+ CORE_ADDR pc;
+
+ if (sal->pc == 0 && sal->symtab != 0)
+ {
+ pc = find_line_pc (sal->symtab, sal->line);
+ if (pc == 0)
+ error ("No line %d in file \"%s\".",
+ sal->line, sal->symtab->filename);
+ sal->pc = pc;
+ }
+}
+
+void
+break_command (arg, from_tty)
+ char *arg;
+ int from_tty;
+{
+ break_command_1 (arg, 0, from_tty);
+}
+
+static void
+tbreak_command (arg, from_tty)
+ char *arg;
+ int from_tty;
+{
+ break_command_1 (arg, 1, from_tty);
+}
+
+/* ARGSUSED */
+static void
+watch_command (arg, from_tty)
+ char *arg;
+ int from_tty;
+{
+ struct breakpoint *b;
+ struct symtab_and_line sal;
+ struct expression *exp;
+ struct block *exp_valid_block;
+ struct value *val;
+
+ sal.pc = 0;
+ sal.symtab = NULL;
+ sal.line = 0;
+
+ /* Parse arguments. */
+ innermost_block = NULL;
+ exp = parse_expression (arg);
+ exp_valid_block = innermost_block;
+ val = evaluate_expression (exp);
+ release_value (val);
+ if (VALUE_LAZY (val))
+ value_fetch_lazy (val);
+
+ /* Now set up the breakpoint. */
+ b = set_raw_breakpoint (sal);
+ set_breakpoint_count (breakpoint_count + 1);
+ b->number = breakpoint_count;
+ b->type = bp_watchpoint;
+ b->disposition = donttouch;
+ b->exp = exp;
+ b->exp_valid_block = exp_valid_block;
+ b->val = val;
+ b->cond = 0;
+ b->cond_string = NULL;
+ b->exp_string = savestring (arg, strlen (arg));
+ mention (b);
+}
+\f
+/*
+ * Helper routine for the until_command routine in infcmd.c. Here
+ * because it uses the mechanisms of breakpoints.
+ */
+/* ARGSUSED */
+void
+until_break_command (arg, from_tty)
+ char *arg;
+ int from_tty;
+{
+ struct symtabs_and_lines sals;
+ struct symtab_and_line sal;
+ FRAME prev_frame = get_prev_frame (selected_frame);
+ struct breakpoint *breakpoint;
+ struct cleanup *old_chain;
+
+ clear_proceed_status ();
+
+ /* Set a breakpoint where the user wants it and at return from
+ this function */
+
+ if (default_breakpoint_valid)
+ sals = decode_line_1 (&arg, 1, default_breakpoint_symtab,
+ default_breakpoint_line, (char ***)NULL);
+ else
+ sals = decode_line_1 (&arg, 1, (struct symtab *)NULL, 0, (char ***)NULL);
+
+ if (sals.nelts != 1)
+ error ("Couldn't get information on specified line.");
+
+ sal = sals.sals[0];
+ free ((PTR)sals.sals); /* malloc'd, so freed */
+
+ if (*arg)
+ error ("Junk at end of arguments.");
+
+ resolve_sal_pc (&sal);
+
+ breakpoint = set_momentary_breakpoint (sal, selected_frame, bp_until);
+
+ old_chain = make_cleanup(delete_breakpoint, breakpoint);
+
+ /* Keep within the current frame */
+
+ if (prev_frame)
+ {
+ struct frame_info *fi;
+
+ fi = get_frame_info (prev_frame);
+ sal = find_pc_line (fi->pc, 0);
+ sal.pc = fi->pc;
+ breakpoint = set_momentary_breakpoint (sal, prev_frame, bp_until);
+ make_cleanup(delete_breakpoint, breakpoint);
+ }
+
+ proceed (-1, TARGET_SIGNAL_DEFAULT, 0);
+ do_cleanups(old_chain);
+}
+\f
+#if 0
+/* These aren't used; I don't konw what they were for. */
+/* Set a breakpoint at the catch clause for NAME. */
+static int
+catch_breakpoint (name)
+ char *name;
+{
+}
+
+static int
+disable_catch_breakpoint ()
+{
+}
+
+static int
+delete_catch_breakpoint ()
+{
+}
+
+static int
+enable_catch_breakpoint ()
+{
+}
+#endif /* 0 */
+
+struct sal_chain
+{
+ struct sal_chain *next;
+ struct symtab_and_line sal;
+};
+
+#if 0
+/* This isn't used; I don't know what it was for. */
+/* For each catch clause identified in ARGS, run FUNCTION
+ with that clause as an argument. */
+static struct symtabs_and_lines
+map_catch_names (args, function)
+ char *args;
+ int (*function)();
+{
+ register char *p = args;
+ register char *p1;
+ struct symtabs_and_lines sals;
+#if 0
+ struct sal_chain *sal_chain = 0;
+#endif
+
+ if (p == 0)
+ error_no_arg ("one or more catch names");
+
+ sals.nelts = 0;
+ sals.sals = NULL;
+
+ while (*p)
+ {
+ p1 = p;
+ /* Don't swallow conditional part. */
+ if (p1[0] == 'i' && p1[1] == 'f'
+ && (p1[2] == ' ' || p1[2] == '\t'))
+ break;
+
+ if (isalpha (*p1))
+ {
+ p1++;
+ while (isalnum (*p1) || *p1 == '_' || *p1 == '$')
+ p1++;
+ }
+
+ if (*p1 && *p1 != ' ' && *p1 != '\t')
+ error ("Arguments must be catch names.");
+
+ *p1 = 0;
+#if 0
+ if (function (p))
+ {
+ struct sal_chain *next
+ = (struct sal_chain *)alloca (sizeof (struct sal_chain));
+ next->next = sal_chain;
+ next->sal = get_catch_sal (p);
+ sal_chain = next;
+ goto win;
+ }
+#endif
+ printf_unfiltered ("No catch clause for exception %s.\n", p);
+#if 0
+ win:
+#endif
+ p = p1;
+ while (*p == ' ' || *p == '\t') p++;
+ }
}
+#endif /* 0 */
-/* Set a breakpoint that will evaporate an end of command
- at address specified by SAL.
- Restrict it to frame FRAME if FRAME is nonzero. */
+/* This shares a lot of code with `print_frame_label_vars' from stack.c. */
-void
-set_momentary_breakpoint (sal, frame)
- struct symtab_and_line sal;
- FRAME frame;
+static struct symtabs_and_lines
+get_catch_sals (this_level_only)
+ int this_level_only;
{
- register struct breakpoint *b;
- b = set_raw_breakpoint (sal);
- b->number = -3;
- b->enable = delete;
- b->frame = (frame ? FRAME_FP (frame) : 0);
-}
+ register struct blockvector *bl;
+ register struct block *block;
+ int index, have_default = 0;
+ struct frame_info *fi;
+ CORE_ADDR pc;
+ struct symtabs_and_lines sals;
+ struct sal_chain *sal_chain = 0;
+ char *blocks_searched;
-void
-clear_momentary_breakpoints ()
-{
- register struct breakpoint *b;
- ALL_BREAKPOINTS (b)
- if (b->number == -3)
- {
- delete_breakpoint (b);
- break;
- }
-}
-\f
-/* Set a breakpoint from a symtab and line.
- If TEMPFLAG is nonzero, it is a temporary breakpoint.
- Print the same confirmation messages that the breakpoint command prints. */
+ /* Not sure whether an error message is always the correct response,
+ but it's better than a core dump. */
+ if (selected_frame == NULL)
+ error ("No selected frame.");
+ block = get_frame_block (selected_frame);
+ fi = get_frame_info (selected_frame);
+ pc = fi->pc;
-void
-set_breakpoint (s, line, tempflag)
- struct symtab *s;
- int line;
- int tempflag;
-{
- register struct breakpoint *b;
- struct symtab_and_line sal;
-
- sal.symtab = s;
- sal.line = line;
- sal.pc = find_line_pc (sal.symtab, sal.line);
- if (sal.pc == 0)
- error ("No line %d in file \"%s\".\n", sal.line, sal.symtab->filename);
- else
+ sals.nelts = 0;
+ sals.sals = NULL;
+
+ if (block == 0)
+ error ("No symbol table info available.\n");
+
+ bl = blockvector_for_pc (BLOCK_END (block) - 4, &index);
+ blocks_searched = (char *) alloca (BLOCKVECTOR_NBLOCKS (bl) * sizeof (char));
+ memset (blocks_searched, 0, BLOCKVECTOR_NBLOCKS (bl) * sizeof (char));
+
+ while (block != 0)
{
- describe_other_breakpoints (sal.pc);
+ CORE_ADDR end = BLOCK_END (block) - 4;
+ int last_index;
+
+ if (bl != blockvector_for_pc (end, &index))
+ error ("blockvector blotch");
+ if (BLOCKVECTOR_BLOCK (bl, index) != block)
+ error ("blockvector botch");
+ last_index = BLOCKVECTOR_NBLOCKS (bl);
+ index += 1;
+
+ /* Don't print out blocks that have gone by. */
+ while (index < last_index
+ && BLOCK_END (BLOCKVECTOR_BLOCK (bl, index)) < pc)
+ index++;
+
+ while (index < last_index
+ && BLOCK_END (BLOCKVECTOR_BLOCK (bl, index)) < end)
+ {
+ if (blocks_searched[index] == 0)
+ {
+ struct block *b = BLOCKVECTOR_BLOCK (bl, index);
+ int nsyms;
+ register int i;
+ register struct symbol *sym;
+
+ nsyms = BLOCK_NSYMS (b);
+
+ for (i = 0; i < nsyms; i++)
+ {
+ sym = BLOCK_SYM (b, i);
+ if (STREQ (SYMBOL_NAME (sym), "default"))
+ {
+ if (have_default)
+ continue;
+ have_default = 1;
+ }
+ if (SYMBOL_CLASS (sym) == LOC_LABEL)
+ {
+ struct sal_chain *next = (struct sal_chain *)
+ alloca (sizeof (struct sal_chain));
+ next->next = sal_chain;
+ next->sal = find_pc_line (SYMBOL_VALUE_ADDRESS (sym), 0);
+ sal_chain = next;
+ }
+ }
+ blocks_searched[index] = 1;
+ }
+ index++;
+ }
+ if (have_default)
+ break;
+ if (sal_chain && this_level_only)
+ break;
- b = set_raw_breakpoint (sal);
- b->number = ++breakpoint_count;
- b->cond = 0;
- if (tempflag)
- b->enable = temporary;
-
- printf ("Breakpoint %d at 0x%x", b->number, b->address);
- if (b->symtab)
- printf (": file %s, line %d.", b->symtab->filename, b->line_number);
- printf ("\n");
+ /* After handling the function's top-level block, stop.
+ Don't continue to its superblock, the block of
+ per-file symbols. */
+ if (BLOCK_FUNCTION (block))
+ break;
+ block = BLOCK_SUPERBLOCK (block);
+ }
+
+ if (sal_chain)
+ {
+ struct sal_chain *tmp_chain;
+
+ /* Count the number of entries. */
+ for (index = 0, tmp_chain = sal_chain; tmp_chain;
+ tmp_chain = tmp_chain->next)
+ index++;
+
+ sals.nelts = index;
+ sals.sals = (struct symtab_and_line *)
+ xmalloc (index * sizeof (struct symtab_and_line));
+ for (index = 0; sal_chain; sal_chain = sal_chain->next, index++)
+ sals.sals[index] = sal_chain->sal;
}
+
+ return sals;
}
-\f
-/* Set a breakpoint according to ARG (function, linenum or *address)
- and make it temporary if TEMPFLAG is nonzero. */
+
+/* Commands to deal with catching exceptions. */
static void
-break_command_1 (arg, tempflag, from_tty)
+catch_command_1 (arg, tempflag, from_tty)
char *arg;
- int tempflag, from_tty;
+ int tempflag;
+ int from_tty;
{
+ /* First, translate ARG into something we can deal with in terms
+ of breakpoints. */
+
struct symtabs_and_lines sals;
struct symtab_and_line sal;
register struct expression *cond = 0;
register struct breakpoint *b;
char *save_arg;
int i;
- CORE_ADDR pc;
-
- sals.sals = NULL;
- sals.nelts = 0;
sal.line = sal.pc = sal.end = 0;
sal.symtab = 0;
- /* If no arg given, or if first arg is 'if ', use the default breakpoint. */
+ /* If no arg given, or if first arg is 'if ', all active catch clauses
+ are breakpointed. */
if (!arg || (arg[0] == 'i' && arg[1] == 'f'
&& (arg[2] == ' ' || arg[2] == '\t')))
{
- if (default_breakpoint_valid)
- {
- sals.sals = (struct symtab_and_line *)
- malloc (sizeof (struct symtab_and_line));
- sal.pc = default_breakpoint_address;
- sal.line = default_breakpoint_line;
- sal.symtab = default_breakpoint_symtab;
- sals.sals[0] = sal;
- sals.nelts = 1;
- }
- else
- error ("No default breakpoint address now.");
+ /* Grab all active catch clauses. */
+ sals = get_catch_sals (0);
}
else
- /* Force almost all breakpoints to be in terms of the
- current_source_symtab (which is decode_line_1's default). This
- should produce the results we want almost all of the time while
- leaving default_breakpoint_* alone. */
- if (default_breakpoint_valid
- && (!current_source_symtab
- || (arg && (*arg == '+' || *arg == '-'))))
- sals = decode_line_1 (&arg, 1, default_breakpoint_symtab,
- default_breakpoint_line);
- else
- sals = decode_line_1 (&arg, 1, 0, 0);
-
+ {
+ /* Grab selected catch clauses. */
+ error ("catch NAME not implemented");
+#if 0
+ /* This isn't used; I don't know what it was for. */
+ sals = map_catch_names (arg, catch_breakpoint);
+#endif
+ }
+
if (! sals.nelts)
return;
save_arg = arg;
for (i = 0; i < sals.nelts; i++)
{
- sal = sals.sals[i];
- if (sal.pc == 0 && sal.symtab != 0)
- {
- pc = find_line_pc (sal.symtab, sal.line);
- if (pc == 0)
- error ("No line %d in file \"%s\".",
- sal.line, sal.symtab->filename);
- }
- else
- pc = sal.pc;
+ resolve_sal_pc (&sals.sals[i]);
while (arg && *arg)
{
if (arg[0] == 'i' && arg[1] == 'f'
&& (arg[2] == ' ' || arg[2] == '\t'))
- cond = (struct expression *) parse_c_1 ((arg += 2, &arg),
- block_for_pc (pc), 0);
+ cond = parse_exp_1 ((arg += 2, &arg),
+ block_for_pc (sals.sals[i].pc), 0);
else
error ("Junk at end of arguments.");
}
arg = save_arg;
- sals.sals[i].pc = pc;
}
for (i = 0; i < sals.nelts; i++)
describe_other_breakpoints (sal.pc);
b = set_raw_breakpoint (sal);
- b->number = ++breakpoint_count;
+ set_breakpoint_count (breakpoint_count + 1);
+ b->number = breakpoint_count;
+ b->type = bp_breakpoint;
b->cond = cond;
- if (tempflag)
- b->enable = temporary;
+ b->enable = enabled;
+ b->disposition = tempflag ? delete : donttouch;
- printf ("Breakpoint %d at 0x%x", b->number, b->address);
- if (b->symtab)
- printf (": file %s, line %d.", b->symtab->filename, b->line_number);
- printf ("\n");
+ mention (b);
}
if (sals.nelts > 1)
{
- printf ("Multiple breakpoints were set.\n");
- printf ("Use the \"delete\" command to delete unwanted breakpoints.\n");
+ printf_unfiltered ("Multiple breakpoints were set.\n");
+ printf_unfiltered ("Use the \"delete\" command to delete unwanted breakpoints.\n");
}
- free (sals.sals);
+ free ((PTR)sals.sals);
}
+#if 0
+/* These aren't used; I don't know what they were for. */
+/* Disable breakpoints on all catch clauses described in ARGS. */
static void
-break_command (arg, from_tty)
- char *arg;
- int from_tty;
+disable_catch (args)
+ char *args;
{
- break_command_1 (arg, 0, from_tty);
+ /* Map the disable command to catch clauses described in ARGS. */
}
+/* Enable breakpoints on all catch clauses described in ARGS. */
static void
-tbreak_command (arg, from_tty)
- char *arg;
- int from_tty;
+enable_catch (args)
+ char *args;
{
- break_command_1 (arg, 1, from_tty);
+ /* Map the disable command to catch clauses described in ARGS. */
}
-\f
-/*
- * Helper routine for the until_command routine in infcmd.c. Here
- * because it uses the mechanisms of breakpoints.
- */
-void
-until_break_command (arg, from_tty)
+
+/* Delete breakpoints on all catch clauses in the active scope. */
+static void
+delete_catch (args)
+ char *args;
+{
+ /* Map the delete command to catch clauses described in ARGS. */
+}
+#endif /* 0 */
+
+static void
+catch_command (arg, from_tty)
char *arg;
int from_tty;
{
- struct symtabs_and_lines sals;
- struct symtab_and_line sal;
- FRAME prev_frame = get_prev_frame (selected_frame);
-
- clear_proceed_status ();
-
- /* Set a breakpoint where the user wants it and at return from
- this function */
-
- if (default_breakpoint_valid)
- sals = decode_line_1 (&arg, 1, default_breakpoint_symtab,
- default_breakpoint_line);
- else
- sals = decode_line_1 (&arg, 1, 0, 0);
-
- if (sals.nelts != 1)
- error ("Couldn't get information on specified line.");
-
- sal = sals.sals[0];
- free (sals.sals); /* malloc'd, so freed */
-
- if (*arg)
- error ("Junk at end of arguments.");
-
- if (sal.pc == 0 && sal.symtab != 0)
- sal.pc = find_line_pc (sal.symtab, sal.line);
-
- if (sal.pc == 0)
- error ("No line %d in file \"%s\".", sal.line, sal.symtab->filename);
-
- set_momentary_breakpoint (sal, selected_frame);
-
- /* Keep within the current frame */
-
- if (prev_frame)
- {
- struct frame_info *fi;
-
- fi = get_frame_info (prev_frame);
- sal = find_pc_line (fi->pc, 0);
- sal.pc = fi->pc;
- set_momentary_breakpoint (sal, prev_frame);
- }
-
- proceed (-1, -1, 0);
+ catch_command_1 (arg, 0, from_tty);
}
\f
static void
}
else
{
- sals.sals = (struct symtab_and_line *) malloc (sizeof (struct symtab_and_line));
+ sals.sals = (struct symtab_and_line *) xmalloc (sizeof (struct symtab_and_line));
sal.line = default_breakpoint_line;
sal.symtab = default_breakpoint_symtab;
sal.pc = 0;
sal = sals.sals[i];
found = (struct breakpoint *) 0;
while (breakpoint_chain
- && (sal.pc ? breakpoint_chain->address == sal.pc
- : (breakpoint_chain->symtab == sal.symtab
+ && (sal.pc
+ ? breakpoint_chain->address == sal.pc
+ : (breakpoint_chain->source_file != NULL
+ && sal.symtab != NULL
+ && STREQ (breakpoint_chain->source_file,
+ sal.symtab->filename)
&& breakpoint_chain->line_number == sal.line)))
{
b1 = breakpoint_chain;
ALL_BREAKPOINTS (b)
while (b->next
- && (sal.pc ? b->next->address == sal.pc
- : (b->next->symtab == sal.symtab
+ && b->next->type != bp_watchpoint
+ && (sal.pc
+ ? b->next->address == sal.pc
+ : (b->next->source_file != NULL
+ && sal.symtab != NULL
+ && STREQ (b->next->source_file, sal.symtab->filename)
&& b->next->line_number == sal.line)))
{
b1 = b->next;
}
if (found == 0)
- error ("No breakpoint at %s.", arg);
+ {
+ if (arg)
+ error ("No breakpoint at %s.", arg);
+ else
+ error ("No breakpoint at this line.");
+ }
if (found->next) from_tty = 1; /* Always report if deleted more than one */
- if (from_tty) printf ("Deleted breakpoint%s ", found->next ? "s" : "");
+ if (from_tty) printf_unfiltered ("Deleted breakpoint%s ", found->next ? "s" : "");
while (found)
{
- if (from_tty) printf ("%d ", found->number);
+ if (from_tty) printf_unfiltered ("%d ", found->number);
b1 = found->next;
delete_breakpoint (found);
found = b1;
}
- if (from_tty) putchar ('\n');
+ if (from_tty) putchar_unfiltered ('\n');
}
- free (sals.sals);
+ free ((PTR)sals.sals);
}
\f
-/* Delete breakpoint number BNUM if it is a `delete' breakpoint.
- This is called after breakpoint BNUM has been hit.
- Also delete any breakpoint numbered -3 unless there are breakpoint
- commands to be executed. */
+/* Delete breakpoint in BS if they are `delete' breakpoints.
+ This is called after any breakpoint is hit, or after errors. */
void
-breakpoint_auto_delete (bnum)
- int bnum;
+breakpoint_auto_delete (bs)
+ bpstat bs;
{
- register struct breakpoint *b;
- if (bnum != 0)
- ALL_BREAKPOINTS (b)
- if (b->number == bnum)
- {
- if (b->enable == delete)
- delete_breakpoint (b);
- break;
- }
- if (breakpoint_commands == 0)
- clear_momentary_breakpoints ();
+ for (; bs; bs = bs->next)
+ if (bs->breakpoint_at && bs->breakpoint_at->disposition == delete
+ && bs->stop)
+ delete_breakpoint (bs->breakpoint_at);
}
-static void
+/* Delete a breakpoint and clean up all traces of it in the data structures. */
+
+void
delete_breakpoint (bpt)
struct breakpoint *bpt;
{
register struct breakpoint *b;
+ register bpstat bs;
if (bpt->inserted)
- write_memory (bpt->address, bpt->shadow_contents, sizeof break_insn);
+ target_remove_breakpoint(bpt->address, bpt->shadow_contents);
if (breakpoint_chain == bpt)
breakpoint_chain = bpt->next;
}
check_duplicates (bpt->address);
+ /* If this breakpoint was inserted, and there is another breakpoint
+ at the same address, we need to insert the other breakpoint. */
+ if (bpt->inserted)
+ {
+ ALL_BREAKPOINTS (b)
+ if (b->address == bpt->address
+ && !b->duplicate
+ && b->enable != disabled)
+ {
+ int val;
+ val = target_insert_breakpoint (b->address, b->shadow_contents);
+ if (val != 0)
+ {
+ target_terminal_ours_for_output ();
+ fprintf_unfiltered (gdb_stderr, "Cannot insert breakpoint %d:\n", b->number);
+ memory_error (val, b->address); /* which bombs us out */
+ }
+ else
+ b->inserted = 1;
+ }
+ }
free_command_lines (&bpt->commands);
if (bpt->cond)
free (bpt->cond);
+ if (bpt->cond_string != NULL)
+ free (bpt->cond_string);
+ if (bpt->addr_string != NULL)
+ free (bpt->addr_string);
+ if (bpt->exp_string != NULL)
+ free (bpt->exp_string);
+ if (bpt->source_file != NULL)
+ free (bpt->source_file);
+
+ if (xgdb_verbose && bpt->type == bp_breakpoint)
+ {
+ target_terminal_ours_for_output ();
+ printf_unfiltered ("breakpoint #%d deleted\n", bpt->number);
+ }
- if (xgdb_verbose && bpt->number >=0)
- printf ("breakpoint #%d deleted\n", bpt->number);
-
- free (bpt);
+ /* Be sure no bpstat's are pointing at it after it's been freed. */
+ /* FIXME, how can we find all bpstat's?
+ We just check stop_bpstat for now. */
+ for (bs = stop_bpstat; bs; bs = bs->next)
+ if (bs->breakpoint_at == bpt)
+ bs->breakpoint_at = NULL;
+ free ((PTR)bpt);
}
-static void map_breakpoint_numbers ();
-
static void
delete_command (arg, from_tty)
char *arg;
int from_tty;
{
- register struct breakpoint *b, *b1;
if (arg == 0)
{
/* Ask user only if there are some breakpoints to delete. */
if (!from_tty
- || breakpoint_chain && query ("Delete all breakpoints? "))
+ || (breakpoint_chain && query ("Delete all breakpoints? ", 0, 0)))
{
/* No arg; clear all breakpoints. */
while (breakpoint_chain)
map_breakpoint_numbers (arg, delete_breakpoint);
}
-/* Delete all breakpoints.
- Done when new symtabs are loaded, since the break condition expressions
- may become invalid, and the breakpoints are probably wrong anyway. */
+/* Reset a breakpoint given it's struct breakpoint * BINT.
+ The value we return ends up being the return value from catch_errors.
+ Unused in this case. */
+
+static int
+breakpoint_re_set_one (bint)
+ char *bint;
+{
+ struct breakpoint *b = (struct breakpoint *)bint; /* get past catch_errs */
+ int i;
+ struct symtabs_and_lines sals;
+ char *s;
+ enum enable save_enable;
+
+ switch (b->type)
+ {
+ case bp_breakpoint:
+ if (b->addr_string == NULL)
+ {
+ /* Anything without a string can't be re-set. */
+ delete_breakpoint (b);
+ return 0;
+ }
+ /* In case we have a problem, disable this breakpoint. We'll restore
+ its status if we succeed. */
+ save_enable = b->enable;
+ b->enable = disabled;
+
+ s = b->addr_string;
+ sals = decode_line_1 (&s, 1, (struct symtab *)NULL, 0, (char ***)NULL);
+ for (i = 0; i < sals.nelts; i++)
+ {
+ resolve_sal_pc (&sals.sals[i]);
+
+ /* Reparse conditions, they might contain references to the
+ old symtab. */
+ if (b->cond_string != NULL)
+ {
+ s = b->cond_string;
+ if (b->cond)
+ free ((PTR)b->cond);
+ b->cond = parse_exp_1 (&s, block_for_pc (sals.sals[i].pc), 0);
+ }
+
+ /* We need to re-set the breakpoint if the address changes...*/
+ if (b->address != sals.sals[i].pc
+ /* ...or new and old breakpoints both have source files, and
+ the source file name or the line number changes... */
+ || (b->source_file != NULL
+ && sals.sals[i].symtab != NULL
+ && (!STREQ (b->source_file, sals.sals[i].symtab->filename)
+ || b->line_number != sals.sals[i].line)
+ )
+ /* ...or we switch between having a source file and not having
+ one. */
+ || ((b->source_file == NULL) != (sals.sals[i].symtab == NULL))
+ )
+ {
+ if (b->source_file != NULL)
+ free (b->source_file);
+ if (sals.sals[i].symtab == NULL)
+ b->source_file = NULL;
+ else
+ b->source_file =
+ savestring (sals.sals[i].symtab->filename,
+ strlen (sals.sals[i].symtab->filename));
+ b->line_number = sals.sals[i].line;
+ b->address = sals.sals[i].pc;
+
+ check_duplicates (b->address);
+
+ mention (b);
+ }
+ b->enable = save_enable; /* Restore it, this worked. */
+ }
+ free ((PTR)sals.sals);
+ break;
+
+ case bp_watchpoint:
+ innermost_block = NULL;
+ /* The issue arises of what context to evaluate this in. The same
+ one as when it was set, but what does that mean when symbols have
+ been re-read? We could save the filename and functionname, but
+ if the context is more local than that, the best we could do would
+ be something like how many levels deep and which index at that
+ particular level, but that's going to be less stable than filenames
+ or functionnames. */
+ /* So for now, just use a global context. */
+ b->exp = parse_expression (b->exp_string);
+ b->exp_valid_block = innermost_block;
+ b->val = evaluate_expression (b->exp);
+ release_value (b->val);
+ if (VALUE_LAZY (b->val))
+ value_fetch_lazy (b->val);
+
+ if (b->cond_string != NULL)
+ {
+ s = b->cond_string;
+ b->cond = parse_exp_1 (&s, (struct block *)0, 0);
+ }
+ if (b->enable == enabled)
+ mention (b);
+ break;
+
+ default:
+ printf_filtered ("Deleting unknown breakpoint type %d\n", b->type);
+ /* fall through */
+ case bp_until:
+ case bp_finish:
+ case bp_longjmp:
+ case bp_longjmp_resume:
+ case bp_call_dummy:
+ delete_breakpoint (b);
+ break;
+ }
+
+ return 0;
+}
+/* Re-set all breakpoints after symbols have been re-loaded. */
void
-clear_breakpoints ()
+breakpoint_re_set ()
{
- delete_command (0, 0);
+ struct breakpoint *b, *temp;
+ static char message1[] = "Error in re-setting breakpoint %d:\n";
+ char message[sizeof (message1) + 30 /* slop */];
+
+ ALL_BREAKPOINTS_SAFE (b, temp)
+ {
+ sprintf (message, message1, b->number); /* Format possible error msg */
+ catch_errors (breakpoint_re_set_one, (char *) b, message,
+ RETURN_MASK_ALL);
+ }
+
+ create_longjmp_breakpoint("longjmp");
+ create_longjmp_breakpoint("_longjmp");
+ create_longjmp_breakpoint("siglongjmp");
+ create_longjmp_breakpoint(NULL);
+
+#if 0
+ /* Took this out (temporaliy at least), since it produces an extra
+ blank line at startup. This messes up the gdbtests. -PB */
+ /* Blank line to finish off all those mention() messages we just printed. */
+ printf_filtered ("\n");
+#endif
}
\f
/* Set ignore-count of breakpoint number BPTNUM to COUNT.
if (!from_tty)
return;
else if (count == 0)
- printf ("Will stop next time breakpoint %d is reached.", bptnum);
+ printf_filtered ("Will stop next time breakpoint %d is reached.",
+ bptnum);
else if (count == 1)
- printf ("Will ignore next crossing of breakpoint %d.", bptnum);
+ printf_filtered ("Will ignore next crossing of breakpoint %d.",
+ bptnum);
else
- printf ("Will ignore next %d crossings of breakpoint %d.",
+ printf_filtered ("Will ignore next %d crossings of breakpoint %d.",
count, bptnum);
return;
}
char *args;
int from_tty;
{
- register char *p = args;
+ char *p = args;
register int num;
if (p == 0)
error_no_arg ("a breakpoint number");
- while (*p >= '0' && *p <= '9') p++;
- if (*p && *p != ' ' && *p != '\t')
- error ("First argument must be a breakpoint number.");
-
- num = atoi (args);
+ num = get_number (&p);
if (*p == 0)
error ("Second argument (specified ignore-count) is missing.");
- set_ignore_count (num, parse_and_eval_address (p), from_tty);
- printf ("\n");
+ set_ignore_count (num,
+ longest_to_int (value_as_long (parse_and_eval (p))),
+ from_tty);
+ printf_filtered ("\n");
}
\f
/* Call FUNCTION on each of the breakpoints
static void
map_breakpoint_numbers (args, function)
char *args;
- void (*function) ();
+ void (*function) PARAMS ((struct breakpoint *));
{
register char *p = args;
- register char *p1;
+ char *p1;
register int num;
register struct breakpoint *b;
while (*p)
{
p1 = p;
- while (*p1 >= '0' && *p1 <= '9') p1++;
- if (*p1 && *p1 != ' ' && *p1 != '\t')
- error ("Arguments must be breakpoint numbers.");
-
- num = atoi (p);
+
+ num = get_number (&p1);
ALL_BREAKPOINTS (b)
if (b->number == num)
function (b);
goto win;
}
- printf ("No breakpoint number %d.\n", num);
+ printf_unfiltered ("No breakpoint number %d.\n", num);
win:
p = p1;
- while (*p == ' ' || *p == '\t') p++;
}
}
enable_breakpoint (bpt)
struct breakpoint *bpt;
{
+ FRAME save_selected_frame = NULL;
+ int save_selected_frame_level = -1;
+
bpt->enable = enabled;
- if (xgdb_verbose && bpt->number >= 0)
- printf ("breakpoint #%d enabled\n", bpt->number);
+ if (xgdb_verbose && bpt->type == bp_breakpoint)
+ printf_unfiltered ("breakpoint #%d enabled\n", bpt->number);
check_duplicates (bpt->address);
+ if (bpt->type == bp_watchpoint)
+ {
+ if (bpt->exp_valid_block != NULL)
+ {
+ FRAME fr = within_scope (bpt->exp_valid_block);
+ if (fr == NULL)
+ {
+ printf_filtered ("\
+Cannot enable watchpoint %d because the block in which its expression\n\
+is valid is not currently in scope.\n", bpt->number);
+ bpt->enable = disabled;
+ return;
+ }
+ save_selected_frame = selected_frame;
+ save_selected_frame_level = selected_frame_level;
+ select_frame (fr, -1);
+ }
+
+ value_free (bpt->val);
+
+ bpt->val = evaluate_expression (bpt->exp);
+ release_value (bpt->val);
+ if (VALUE_LAZY (bpt->val))
+ value_fetch_lazy (bpt->val);
+
+ if (save_selected_frame_level >= 0)
+ select_frame (save_selected_frame, save_selected_frame_level);
+ }
}
+/* ARGSUSED */
static void
-enable_command (args)
+enable_command (args, from_tty)
char *args;
+ int from_tty;
{
struct breakpoint *bpt;
if (args == 0)
ALL_BREAKPOINTS (bpt)
- enable_breakpoint (bpt);
+ switch (bpt->type)
+ {
+ case bp_breakpoint:
+ case bp_watchpoint:
+ enable_breakpoint (bpt);
+ default:
+ continue;
+ }
else
map_breakpoint_numbers (args, enable_breakpoint);
}
{
bpt->enable = disabled;
- if (xgdb_verbose && bpt->number >= 0)
- printf ("breakpoint #%d disabled\n", bpt->number);
+ if (xgdb_verbose && bpt->type == bp_breakpoint)
+ printf_filtered ("breakpoint #%d disabled\n", bpt->number);
check_duplicates (bpt->address);
}
+/* ARGSUSED */
static void
-disable_command (args)
+disable_command (args, from_tty)
char *args;
+ int from_tty;
{
register struct breakpoint *bpt;
if (args == 0)
ALL_BREAKPOINTS (bpt)
- disable_breakpoint (bpt);
+ switch (bpt->type)
+ {
+ case bp_breakpoint:
+ case bp_watchpoint:
+ disable_breakpoint (bpt);
+ default:
+ continue;
+ }
else
map_breakpoint_numbers (args, disable_breakpoint);
}
enable_once_breakpoint (bpt)
struct breakpoint *bpt;
{
- bpt->enable = temporary;
+ bpt->enable = enabled;
+ bpt->disposition = disable;
check_duplicates (bpt->address);
}
+/* ARGSUSED */
static void
-enable_once_command (args)
+enable_once_command (args, from_tty)
char *args;
+ int from_tty;
{
map_breakpoint_numbers (args, enable_once_breakpoint);
}
enable_delete_breakpoint (bpt)
struct breakpoint *bpt;
{
- bpt->enable = delete;
+ bpt->enable = enabled;
+ bpt->disposition = delete;
check_duplicates (bpt->address);
}
+/* ARGSUSED */
static void
-enable_delete_command (args)
+enable_delete_command (args, from_tty)
char *args;
+ int from_tty;
{
map_breakpoint_numbers (args, enable_delete_breakpoint);
}
error ("Empty line specification.");
if (default_breakpoint_valid)
sals = decode_line_1 (&string, funfirstline,
- default_breakpoint_symtab, default_breakpoint_line);
+ default_breakpoint_symtab, default_breakpoint_line,
+ (char ***)NULL);
else
- sals = decode_line_1 (&string, funfirstline, 0, 0);
+ sals = decode_line_1 (&string, funfirstline,
+ (struct symtab *)NULL, 0, (char ***)NULL);
if (*string)
error ("Junk at end of line specification: %s", string);
return sals;
}
\f
-
-/* Chain containing all defined enable commands. */
-
-extern struct cmd_list_element
- *enablelist, *disablelist,
- *deletelist, *enablebreaklist;
-
-extern struct cmd_list_element *cmdlist;
-
void
_initialize_breakpoint ()
{
breakpoint_chain = 0;
+ /* Don't bother to call set_breakpoint_count. $bpnum isn't useful
+ before a breakpoint is set. */
breakpoint_count = 0;
add_com ("ignore", class_breakpoint, ignore_command,
add_com ("condition", class_breakpoint, condition_command,
"Specify breakpoint number N to break only if COND is true.\n\
-N is an integer; COND is a C expression to be evaluated whenever\n\
-breakpoint N is reached. Actually break only when COND is nonzero.");
+N is an integer; COND is an expression to be evaluated whenever\n\
+breakpoint N is reached. ");
add_com ("tbreak", class_breakpoint, tbreak_command,
"Set a temporary breakpoint. Args like \"break\" command.\n\
by using \"enable once\" on the breakpoint number.");
add_prefix_cmd ("enable", class_breakpoint, enable_command,
- "Enable some breakpoints or auto-display expressions.\n\
+ "Enable some breakpoints.\n\
Give breakpoint numbers (separated by spaces) as arguments.\n\
With no subcommand, breakpoints are enabled until you command otherwise.\n\
This is used to cancel the effect of the \"disable\" command.\n\
-With a subcommand you can enable temporarily.\n\
-\n\
-The \"display\" subcommand applies to auto-displays instead of breakpoints.",
+With a subcommand you can enable temporarily.",
&enablelist, "enable ", 1, &cmdlist);
add_abbrev_prefix_cmd ("breakpoints", class_breakpoint, enable_command,
- "Enable some breakpoints or auto-display expressions.\n\
+ "Enable some breakpoints.\n\
Give breakpoint numbers (separated by spaces) as arguments.\n\
-With no subcommand, breakpoints are enabled until you command otherwise.\n\
This is used to cancel the effect of the \"disable\" command.\n\
-May be abbreviates to simply \"enable\".\n\
-With a subcommand you can enable temporarily.",
+May be abbreviated to simply \"enable\".\n",
&enablebreaklist, "enable breakpoints ", 1, &enablelist);
add_cmd ("once", no_class, enable_once_command,
&enablelist);
add_prefix_cmd ("disable", class_breakpoint, disable_command,
- "Disable some breakpoints or auto-display expressions.\n\
+ "Disable some breakpoints.\n\
Arguments are breakpoint numbers with spaces in between.\n\
To disable all breakpoints, give no argument.\n\
-A disabled breakpoint is not forgotten, but has no effect until reenabled.\n\
-\n\
-The \"display\" subcommand applies to auto-displays instead of breakpoints.",
+A disabled breakpoint is not forgotten, but has no effect until reenabled.",
&disablelist, "disable ", 1, &cmdlist);
add_com_alias ("dis", "disable", class_breakpoint, 1);
add_com_alias ("disa", "disable", class_breakpoint, 1);
- add_abbrev_cmd ("breakpoints", class_breakpoint, disable_command,
- "Disable some breakpoints or auto-display expressions.\n\
+ add_cmd ("breakpoints", class_alias, disable_command,
+ "Disable some breakpoints.\n\
Arguments are breakpoint numbers with spaces in between.\n\
To disable all breakpoints, give no argument.\n\
A disabled breakpoint is not forgotten, but has no effect until reenabled.\n\
The \"unset\" command is also an alias for \"delete\".",
&deletelist, "delete ", 1, &cmdlist);
add_com_alias ("d", "delete", class_breakpoint, 1);
- add_com_alias ("unset", "delete", class_alias, 1);
add_cmd ("breakpoints", class_alias, delete_command,
"Delete some breakpoints or auto-display expressions.\n\
add_com_alias ("brea", "break", class_run, 1);
add_info ("breakpoints", breakpoints_info,
+ "Status of user-settable breakpoints, or breakpoint number NUMBER.\n\
+The \"Type\" column indicates one of:\n\
+\tbreakpoint - normal breakpoint\n\
+\twatchpoint - watchpoint\n\
+The \"Disp\" column contains one of \"keep\", \"del\", or \"dis\" to indicate\n\
+the disposition of the breakpoint after it gets hit. \"dis\" means that the\n\
+breakpoint will be disabled. The \"Address\" and \"What\" columns indicate the\n\
+address and file/line number respectively.\n\n\
+Convenience variable \"$_\" and default examine address for \"x\"\n\
+are set to the address of the last breakpoint listed.\n\n\
+Convenience variable \"$bpnum\" contains the number of the last\n\
+breakpoint set.");
+
+#if MAINTENANCE_CMDS
+
+ add_cmd ("breakpoints", class_maintenance, maintenance_info_breakpoints,
"Status of all breakpoints, or breakpoint number NUMBER.\n\
-Second column is \"y\" for enabled breakpoint, \"n\" for disabled,\n\
-\"o\" for enabled once (disable when hit), \"d\" for enable but delete when hit.\n\
-Then come the address and the file/line number.\n\n\
+The \"Type\" column indicates one of:\n\
+\tbreakpoint - normal breakpoint\n\
+\twatchpoint - watchpoint\n\
+\tlongjmp - internal breakpoint used to step through longjmp()\n\
+\tlongjmp resume - internal breakpoint at the target of longjmp()\n\
+\tuntil - internal breakpoint used by the \"until\" command\n\
+\tfinish - internal breakpoint used by the \"finish\" command\n\
+The \"Disp\" column contains one of \"keep\", \"del\", or \"dis\" to indicate\n\
+the disposition of the breakpoint after it gets hit. \"dis\" means that the\n\
+breakpoint will be disabled. The \"Address\" and \"What\" columns indicate the\n\
+address and file/line number respectively.\n\n\
Convenience variable \"$_\" and default examine address for \"x\"\n\
-are set to the address of the last breakpoint listed.");
+are set to the address of the last breakpoint listed.\n\n\
+Convenience variable \"$bpnum\" contains the number of the last\n\
+breakpoint set.",
+ &maintenanceinfolist);
+
+#endif /* MAINTENANCE_CMDS */
+
+ add_com ("catch", class_breakpoint, catch_command,
+ "Set breakpoints to catch exceptions that are raised.\n\
+Argument may be a single exception to catch, multiple exceptions\n\
+to catch, or the default exception \"default\". If no arguments\n\
+are given, breakpoints are set at all exception handlers catch clauses\n\
+within the current scope.\n\
+\n\
+A condition specified for the catch applies to all breakpoints set\n\
+with this command\n\
+\n\
+Do \"help breakpoints\" for info on other commands dealing with breakpoints.");
+
+ add_com ("watch", class_breakpoint, watch_command,
+ "Set a watchpoint for an expression.\n\
+A watchpoint stops execution of your program whenever the value of\n\
+an expression changes.");
+
+ add_info ("watchpoints", breakpoints_info,
+ "Synonym for ``info breakpoints''.");
}
+/* OK, when we call objfile_relocate, we need to relocate breakpoints
+ too. breakpoint_re_set is not a good choice--for example, if
+ addr_string contains just a line number without a file name the
+ breakpoint might get set in a different file. In general, there is
+ no need to go all the way back to the user's string (though this might
+ work if some effort were made to canonicalize it), since symtabs and
+ everything except addresses are still valid.
+
+ Probably the best way to solve this is to have each breakpoint save
+ the objfile and the section number that was used to set it (if set
+ by "*addr", probably it is best to use find_pc_line to get a symtab
+ and use the objfile and block_line_section for that symtab). Then
+ objfile_relocate can call fixup_breakpoints with the objfile and
+ the new_offsets, and it can relocate only the appropriate breakpoints. */
+
+#ifdef IBM6000_TARGET
+/* But for now, just kludge it based on the concept that before an
+ objfile is relocated the breakpoint is below 0x10000000, and afterwards
+ it is higher, so that way we only relocate each breakpoint once. */
+
+void
+fixup_breakpoints (low, high, delta)
+ CORE_ADDR low;
+ CORE_ADDR high;
+ CORE_ADDR delta;
+{
+ struct breakpoint *b;
+
+ ALL_BREAKPOINTS (b)
+ {
+ if (b->address >= low && b->address <= high)
+ b->address += delta;
+ }
+}
+#endif
projects / deliverable / binutils-gdb.git / blobdiff