Revert "Sync readline/ to version 7.0 alpha"
[deliverable/binutils-gdb.git] / gdb / breakpoint.h
index 8abb5eab2de29d3e6f69493e8a70d62b708c0b67..94d93852d3599558c5e3c86c2dcc7c5fff2ca1a2 100644 (file)
@@ -1,5 +1,5 @@
 /* Data structures associated with breakpoints in GDB.
-   Copyright (C) 1992-2014 Free Software Foundation, Inc.
+   Copyright (C) 1992-2015 Free Software Foundation, Inc.
 
    This file is part of GDB.
 
@@ -47,18 +47,13 @@ struct linespec_sals;
 \f
 
 /* Type of breakpoint.  */
-/* FIXME In the future, we should fold all other breakpoint-like
-   things into here.  This includes:
-
-   * single-step (for machines where we have to simulate single
-   stepping) (probably, though perhaps it is better for it to look as
-   much as possible like a single-step to wait_for_inferior).  */
 
 enum bptype
   {
     bp_none = 0,               /* Eventpoint has been deleted */
     bp_breakpoint,             /* Normal breakpoint */
     bp_hardware_breakpoint,    /* Hardware assisted breakpoint */
+    bp_single_step,            /* Software single-step */
     bp_until,                  /* used by until command */
     bp_finish,                 /* used by finish command */
     bp_watchpoint,             /* Watchpoint */
@@ -198,12 +193,6 @@ enum enable_state
                            automatically enabled and reset when the
                            call "lands" (either completes, or stops
                            at another eventpoint).  */
-    bp_permanent        /* There is a breakpoint instruction
-                           hard-wired into the target's code.  Don't
-                           try to write another breakpoint
-                           instruction on top of it, or restore its
-                           value.  Step over it using the
-                           architecture's SKIP_INSN macro.  */
   };
 
 
@@ -235,13 +224,16 @@ struct bp_target_info
   /* Address space at which the breakpoint was placed.  */
   struct address_space *placed_address_space;
 
-  /* Address at which the breakpoint was placed.  This is normally the
-     same as ADDRESS from the bp_location, except when adjustment
-     happens in gdbarch_breakpoint_from_pc.  The most common form of
-     adjustment is stripping an alternate ISA marker from the PC which
-     is used to determine the type of breakpoint to insert.  */
+  /* Address at which the breakpoint was placed.  This is normally
+     the same as REQUESTED_ADDRESS, except when adjustment happens in
+     gdbarch_breakpoint_from_pc.  The most common form of adjustment
+     is stripping an alternate ISA marker from the PC which is used
+     to determine the type of breakpoint to insert.  */
   CORE_ADDR placed_address;
 
+  /* Address at which the breakpoint was requested.  */
+  CORE_ADDR reqstd_address;
+
   /* If this is a ranged breakpoint, then this field contains the
      length of the range that will be watched for execution.  */
   int length;
@@ -378,6 +370,13 @@ struct bp_location
   /* Nonzero if this breakpoint is now inserted.  */
   char inserted;
 
+  /* Nonzero if this is a permanent breakpoint.  There is a breakpoint
+     instruction hard-wired into the target's code.  Don't try to
+     write another breakpoint instruction on top of it, or restore its
+     value.  Step over it using the architecture's
+     gdbarch_skip_permanent_breakpoint method.  */
+  char permanent;
+
   /* Nonzero if this is not the first breakpoint in the list
      for the given address.  location of tracepoint can _never_
      be duplicated with other locations of tracepoints and other
@@ -472,6 +471,26 @@ struct bp_location
   struct symtab *symtab;
 };
 
+/* The possible return values for print_bpstat, print_it_normal,
+   print_it_done, print_it_noop.  */
+enum print_stop_action
+{
+  /* We printed nothing or we need to do some more analysis.  */
+  PRINT_UNKNOWN = -1,
+
+  /* We printed something, and we *do* desire that something to be
+     followed by a location.  */
+  PRINT_SRC_AND_LOC,
+
+  /* We printed something, and we do *not* desire that something to be
+     followed by a location.  */
+  PRINT_SRC_ONLY,
+
+  /* We already printed all we needed to print, don't print anything
+     else.  */
+  PRINT_NOTHING
+};
+
 /* This structure is a collection of function pointers that, if available,
    will be called instead of the performing the default action for this
    bptype.  */
@@ -779,6 +798,11 @@ struct watchpoint
      then an error occurred reading the value.  */
   int val_valid;
 
+  /* When watching the location of a bitfield, contains the offset and size of
+     the bitfield.  Otherwise contains 0.  */
+  int val_bitpos;
+  int val_bitsize;
+
   /* Holds the frame address which identifies the frame this
      watchpoint should be evaluated in, or `null' if the watchpoint
      should be evaluated on the outermost frame.  */
@@ -801,6 +825,20 @@ struct watchpoint
   CORE_ADDR hw_wp_mask;
 };
 
+/* Given a function FUNC (struct breakpoint *B, void *DATA) and
+   USER_DATA, call FUNC for every known breakpoint passing USER_DATA
+   as argument.
+
+   If FUNC returns 1, the loop stops and the current
+   'struct breakpoint' being processed is returned.  If FUNC returns
+   zero, the loop continues.
+
+   This function returns either a 'struct breakpoint' pointer or NULL.
+   It was based on BFD's bfd_sections_find_if function.  */
+
+extern struct breakpoint *breakpoint_find_if
+  (int (*func) (struct breakpoint *b, void *d), void *user_data);
+
 /* Return true if BPT is either a software breakpoint or a hardware
    breakpoint.  */
 
@@ -962,26 +1000,6 @@ struct bpstat_what
     int is_longjmp;
   };
 
-/* The possible return values for print_bpstat, print_it_normal,
-   print_it_done, print_it_noop.  */
-enum print_stop_action
-  {
-    /* We printed nothing or we need to do some more analysis.  */
-    PRINT_UNKNOWN = -1,
-
-    /* We printed something, and we *do* desire that something to be
-       followed by a location.  */
-    PRINT_SRC_AND_LOC,
-
-    /* We printed something, and we do *not* desire that something to
-       be followed by a location.  */
-    PRINT_SRC_ONLY,
-
-    /* We already printed all we needed to print, don't print anything
-       else.  */
-    PRINT_NOTHING
-  };
-
 /* Tell what to do about this bpstat.  */
 struct bpstat_what bpstat_what (bpstat);
 \f
@@ -1113,6 +1131,11 @@ enum breakpoint_here
 
 /* Prototypes for breakpoint-related functions.  */
 
+/* Return 1 if there's a program/permanent breakpoint planted in
+   memory at ADDRESS, return 0 otherwise.  */
+
+extern int program_breakpoint_here_p (struct gdbarch *gdbarch, CORE_ADDR address);
+
 extern enum breakpoint_here breakpoint_here_p (struct address_space *, 
                                               CORE_ADDR);
 
@@ -1126,6 +1149,17 @@ extern int regular_breakpoint_inserted_here_p (struct address_space *,
 extern int software_breakpoint_inserted_here_p (struct address_space *, 
                                                CORE_ADDR);
 
+/* Return non-zero iff there is a hardware breakpoint inserted at
+   PC.  */
+extern int hardware_breakpoint_inserted_here_p (struct address_space *,
+                                               CORE_ADDR);
+
+/* Check whether any location of BP is inserted at PC.  */
+
+extern int breakpoint_has_location_inserted_here (struct breakpoint *bp,
+                                                 struct address_space *aspace,
+                                                 CORE_ADDR pc);
+
 extern int single_step_breakpoint_inserted_here_p (struct address_space *,
                                                   CORE_ADDR);
 
@@ -1135,9 +1169,6 @@ extern int hardware_watchpoint_inserted_in_range (struct address_space *,
                                                  CORE_ADDR addr,
                                                  ULONGEST len);
 
-extern int breakpoint_thread_match (struct address_space *, 
-                                   CORE_ADDR, ptid_t);
-
 /* Returns true if {ASPACE1,ADDR1} and {ASPACE2,ADDR2} represent the
    same breakpoint location.  In most targets, this can only be true
    if ASPACE1 matches ASPACE2.  On targets that have global
@@ -1411,8 +1442,6 @@ extern void breakpoint_set_task (struct breakpoint *b, int task);
 /* Clear the "inserted" flag in all breakpoints.  */
 extern void mark_breakpoints_out (void);
 
-extern void make_breakpoint_permanent (struct breakpoint *);
-
 extern struct breakpoint *create_jit_event_breakpoint (struct gdbarch *,
                                                        CORE_ADDR);
 
@@ -1453,23 +1482,13 @@ extern void add_solib_catchpoint (char *arg, int is_load, int is_temp,
    deletes all breakpoints.  */
 extern void delete_command (char *arg, int from_tty);
 
-/* Manage a software single step breakpoint (or two).  Insert may be
-   called twice before remove is called.  */
+/* Create and insert a new software single step breakpoint for the
+   current thread.  May be called multiple times; each time will add a
+   new location to the set of potential addresses the next instruction
+   is at.  */
 extern void insert_single_step_breakpoint (struct gdbarch *,
                                           struct address_space *, 
                                           CORE_ADDR);
-extern int single_step_breakpoints_inserted (void);
-extern void remove_single_step_breakpoints (void);
-extern void cancel_single_step_breakpoints (void);
-
-/* Manage manual breakpoints, separate from the normal chain of
-   breakpoints.  These functions are used in murky target-specific
-   ways.  Please do not add more uses!  */
-extern void *deprecated_insert_raw_breakpoint (struct gdbarch *,
-                                              struct address_space *, 
-                                              CORE_ADDR);
-extern int deprecated_remove_raw_breakpoint (struct gdbarch *, void *);
-
 /* Check if any hardware watchpoints have triggered, according to the
    target.  */
 int watchpoints_triggered (struct target_waitstatus *);
@@ -1486,7 +1505,17 @@ extern void breakpoint_xfer_memory (gdb_byte *readbuf, gdb_byte *writebuf,
                                    const gdb_byte *writebuf_org,
                                    ULONGEST memaddr, LONGEST len);
 
-extern int breakpoints_always_inserted_mode (void);
+/* Return true if breakpoints should be inserted now.  That'll be the
+   case if either:
+
+    - the target has global breakpoints.
+
+    - "breakpoint always-inserted" is on, and the target has
+      execution.
+
+    - threads are executing.
+*/
+extern int breakpoints_should_be_inserted_now (void);
 
 /* Called each time new event from target is processed.
    Retires previously deleted breakpoint locations that
@@ -1494,7 +1523,7 @@ extern int breakpoints_always_inserted_mode (void);
 extern void breakpoint_retire_moribund (void);
 
 /* Set break condition of breakpoint B to EXP.  */
-extern void set_breakpoint_condition (struct breakpoint *b, char *exp,
+extern void set_breakpoint_condition (struct breakpoint *b, const char *exp,
                                      int from_tty);
 
 /* Checks if we are catching syscalls or not.
This page took 0.028444 seconds and 4 git commands to generate.