#ifndef TM_ALPHA_H
#define TM_ALPHA_H
+#define GDB_MULTI_ARCH GDB_MULTI_ARCH_PARTIAL
+
#include "regcache.h"
#include "bfd.h"
#include "coff/sym.h" /* Needed for PDR below. */
struct value;
struct symbol;
-/* Redefine some target bit sizes from the default. */
-
-#define TARGET_LONG_BIT 64
-#define TARGET_LONG_LONG_BIT 64
-#define TARGET_PTR_BIT 64
-
/* Number of traps that happen between exec'ing the shell
* to run an inferior, and when we finally get to
* the inferior code. This is 2 on most implementations.
#define FUNCTION_START_OFFSET 0
-/* Advance PC across any function entry prologue instructions
- to reach some "real" code. */
-
-#define SKIP_PROLOGUE(pc) alpha_skip_prologue((pc))
-extern CORE_ADDR alpha_skip_prologue (CORE_ADDR addr);
-
-/* Immediately after a function call, return the saved pc.
- Can't always go through the frames for this because on some machines
- the new frame is not set up until the new function executes
- some instructions. */
-
-#define SAVED_PC_AFTER_CALL(frame) alpha_saved_pc_after_call(frame)
-extern CORE_ADDR alpha_saved_pc_after_call (struct frame_info *);
-
/* Are we currently handling a signal ? */
#define IN_SIGTRAMP(pc, name) alpha_osf_in_sigtramp ((pc), (name))
extern int alpha_osf_in_sigtramp (CORE_ADDR, char *);
-/* Stack grows downward. */
-
-#define INNER_THAN(lhs,rhs) core_addr_lessthan ((lhs), (rhs))
-
#define BREAKPOINT {0x80, 0, 0, 0} /* call_pal bpt */
-/* Amount PC must be decremented by after a breakpoint.
- This is often the number of bytes in BREAKPOINT
- but not always. */
-
-#ifndef DECR_PC_AFTER_BREAK
-#define DECR_PC_AFTER_BREAK 4
-#endif
-
-/* Say how long (ordinary) registers are. This is a piece of bogosity
- used in push_word and a few other places; REGISTER_RAW_SIZE is the
- real way to know how big a register is. */
-
-#define REGISTER_SIZE 8
-
-/* Number of machine registers */
-
-#define NUM_REGS 66
-
-
-/* Return the name of register REGNO. */
-
-#define REGISTER_NAME(regno) alpha_register_name ((regno))
-extern char *alpha_register_name (int);
-
-
-/* Register numbers of various important registers.
- Note that most of these values are "real" register numbers,
- and correspond to the general registers of the machine,
- and FP_REGNUM is a "phony" register number which is too large
- to be an actual register number as far as the user is concerned
- but serves to get the desired value when passed to read_register. */
-
-#define V0_REGNUM 0 /* Function integer return value */
-#define T7_REGNUM 8 /* Return address register for OSF/1 __add* */
-#define GCC_FP_REGNUM 15 /* Used by gcc as frame register */
-#define A0_REGNUM 16 /* Loc of first arg during a subr call */
-#define T9_REGNUM 23 /* Return address register for OSF/1 __div* */
-#define T12_REGNUM 27 /* Contains start addr of current proc */
-#define SP_REGNUM 30 /* Contains address of top of stack */
-#define RA_REGNUM 26 /* Contains return address value */
-#define ZERO_REGNUM 31 /* Read-only register, always 0 */
-#define FP0_REGNUM 32 /* Floating point register 0 */
-#define FPA0_REGNUM 48 /* First float arg during a subr call */
-#define FPCR_REGNUM 63 /* Floating point control register */
-#define PC_REGNUM 64 /* Contains program counter */
-#define FP_REGNUM 65 /* Virtual frame pointer */
-
-#define CANNOT_FETCH_REGISTER(regno) \
- alpha_cannot_fetch_register ((regno))
-extern int alpha_cannot_fetch_register (int);
-
-#define CANNOT_STORE_REGISTER(regno) \
- alpha_cannot_store_register ((regno))
-extern int alpha_cannot_store_register (int);
-
-/* Total amount of space needed to store our copies of the machine's
- register state, the array `registers'. */
-#define REGISTER_BYTES (NUM_REGS * 8)
-
-/* Index within `registers' of the first byte of the space for
- register N. */
-
-#define REGISTER_BYTE(N) alpha_register_byte ((N))
-extern int alpha_register_byte (int);
-
-/* Number of bytes of storage in the actual machine representation
- for register N. On Alphas, all regs are 8 bytes. */
-
-#define REGISTER_RAW_SIZE(N) alpha_register_raw_size ((N))
-extern int alpha_register_raw_size (int);
-
-/* Number of bytes of storage in the program's representation
- for register N. On Alphas, all regs are 8 bytes. */
-
-#define REGISTER_VIRTUAL_SIZE(N) alpha_register_virtual_size ((N))
-extern int alpha_register_virtual_size (int);
-
-/* Largest value REGISTER_RAW_SIZE can have. */
-
-#define MAX_REGISTER_RAW_SIZE 8
-
-/* Largest value REGISTER_VIRTUAL_SIZE can have. */
-
-#define MAX_REGISTER_VIRTUAL_SIZE 8
-
-/* Nonzero if register N requires conversion
- from raw format to virtual format.
- The alpha needs a conversion between register and memory format if
- the register is a floating point register and
- memory format is float, as the register format must be double
- or
- memory format is an integer with 4 bytes or less, as the representation
- of integers in floating point registers is different. */
-
-#define REGISTER_CONVERTIBLE(N) alpha_register_convertible ((N))
-extern int alpha_register_convertible (int);
-
-/* Convert data from raw format for register REGNUM in buffer FROM
- to virtual format with type TYPE in buffer TO. */
-
-#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM, TYPE, FROM, TO) \
- alpha_register_convert_to_virtual (REGNUM, TYPE, FROM, TO)
-extern void
-alpha_register_convert_to_virtual (int, struct type *, char *, char *);
-
-/* Convert data from virtual format with type TYPE in buffer FROM
- to raw format for register REGNUM in buffer TO. */
-
-#define REGISTER_CONVERT_TO_RAW(TYPE, REGNUM, FROM, TO) \
- alpha_register_convert_to_raw (TYPE, REGNUM, FROM, TO)
-extern void
-alpha_register_convert_to_raw (struct type *, int, char *, char *);
-
-/* Return the GDB type object for the "standard" data type
- of data in register N. */
-
-#define REGISTER_VIRTUAL_TYPE(N) alpha_register_virtual_type ((N))
-extern struct type * alpha_register_virtual_type (int);
-
-/* Store the address of the place in which to copy the structure the
- subroutine will return. Handled by alpha_push_arguments. */
-
-#define STORE_STRUCT_RETURN(addr, sp) \
- alpha_store_struct_return ((addr), (sp))
-extern void alpha_store_struct_return (CORE_ADDR, CORE_ADDR);
-/**/
-
-/* Extract from an array REGBUF containing the (raw) register state
- a function return value of type TYPE, and copy that, in virtual format,
- into VALBUF. */
-
-#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
- alpha_extract_return_value(TYPE, REGBUF, VALBUF)
-extern void alpha_extract_return_value (struct type *, char *, char *);
-
-/* Write into appropriate registers a function return value
- of type TYPE, given in virtual format. */
-
-#define STORE_RETURN_VALUE(TYPE,VALBUF) \
- alpha_store_return_value(TYPE, VALBUF)
-extern void alpha_store_return_value (struct type *, char *);
-
-/* Extract from an array REGBUF containing the (raw) register state
- the address in which a function should return its structure value,
- as a CORE_ADDR (or an expression that can be used as one). */
-/* The address is passed in a0 upon entry to the function, but when
- the function exits, the compiler has copied the value to v0. This
- convention is specified by the System V ABI, so I think we can rely
- on it. */
-
-#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \
- alpha_extract_struct_value_address (REGBUF)
-extern CORE_ADDR alpha_extract_struct_value_address (char *);
-
-/* Structures are returned by ref in extra arg0 */
-#define USE_STRUCT_CONVENTION(gcc_p, type) \
- alpha_use_struct_convention ((gcc_p), (type))
-extern int alpha_use_struct_convention (int, struct type *);
-\f
-
-/* Describe the pointer in each stack frame to the previous stack frame
- (its caller). */
-
-/* FRAME_CHAIN takes a frame's nominal address
- and produces the frame's chain-pointer. */
-
-#define FRAME_CHAIN(thisframe) alpha_frame_chain (thisframe)
-extern CORE_ADDR alpha_frame_chain (struct frame_info *);
-
-/* Define other aspects of the stack frame. */
-
-
-/* An expression that tells us whether the function invocation represented
- by FI does not have a frame on the stack associated with it. */
-/* We handle this differently for alpha, and maybe we should not */
-
-#define FRAMELESS_FUNCTION_INVOCATION(FI) \
- generic_frameless_function_invocation_not ((FI))
-
-/* Saved Pc. */
-
-#define FRAME_SAVED_PC(FRAME) alpha_frame_saved_pc(FRAME)
-extern CORE_ADDR alpha_frame_saved_pc (struct frame_info *);
-
-/* The alpha has two different virtual pointers for arguments and locals.
-
- The virtual argument pointer is pointing to the bottom of the argument
- transfer area, which is located immediately below the virtual frame
- pointer. Its size is fixed for the native compiler, it is either zero
- (for the no arguments case) or large enough to hold all argument registers.
- gcc uses a variable sized argument transfer area. As it has
- to stay compatible with the native debugging tools it has to use the same
- virtual argument pointer and adjust the argument offsets accordingly.
-
- The virtual local pointer is localoff bytes below the virtual frame
- pointer, the value of localoff is obtained from the PDR. */
-
-#define ALPHA_NUM_ARG_REGS 6
-
-#define FRAME_ARGS_ADDRESS(fi) alpha_frame_args_address ((fi))
-extern CORE_ADDR alpha_frame_args_address (struct frame_info *);
-
-#define FRAME_LOCALS_ADDRESS(fi) alpha_frame_locals_address ((fi))
-extern CORE_ADDR alpha_frame_locals_address (struct frame_info *);
-
-/* Return number of args passed to a frame.
- Can return -1, meaning no way to tell. */
-
-#define FRAME_NUM_ARGS(fi) frame_num_args_unknown ((fi))
-
-/* Return number of bytes at start of arglist that are not really args. */
-
-#define FRAME_ARGS_SKIP 0
-
-/* Put here the code to store, into a struct frame_saved_regs,
- the addresses of the saved registers of frame described by FRAME_INFO.
- This includes special registers such as pc and fp saved in special
- ways in the stack frame. sp is even more special:
- the address we return for it IS the sp for the next frame. */
-
-#define FRAME_INIT_SAVED_REGS(frame_info) \
- alpha_frame_init_saved_regs (frame_info)
-extern void alpha_frame_init_saved_regs (struct frame_info *);
-\f
-
-/* Things needed for making the inferior call functions. */
-
-#define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \
- (alpha_push_arguments((nargs), (args), (sp), (struct_return), (struct_addr)))
-extern CORE_ADDR
-alpha_push_arguments (int, struct value **, CORE_ADDR, int, CORE_ADDR);
-
-/* Push an empty stack frame, to record the current PC, etc. */
-
-#define PUSH_DUMMY_FRAME alpha_push_dummy_frame()
-extern void alpha_push_dummy_frame (void);
-
-/* Discard from the stack the innermost frame, restoring all registers. */
-
-#define POP_FRAME alpha_pop_frame()
-extern void alpha_pop_frame (void);
-
-/* Alpha OSF/1 inhibits execution of code on the stack.
- But there is no need for a dummy on the alpha. PUSH_ARGUMENTS
- takes care of all argument handling and bp_call_dummy takes care
- of stopping the dummy. */
-
-#define CALL_DUMMY_LOCATION AT_ENTRY_POINT
-
-/* On the Alpha the call dummy code is never copied to user space,
- stopping the user call is achieved via a bp_call_dummy breakpoint.
- But we need a fake CALL_DUMMY definition to enable the proper
- call_function_by_hand and to avoid zero length array warnings
- in valops.c */
-
-#define CALL_DUMMY_P (1)
-
-#define CALL_DUMMY_WORDS alpha_call_dummy_words
-extern LONGEST alpha_call_dummy_words[];
-
-#define SIZEOF_CALL_DUMMY_WORDS 0
-
-#define CALL_DUMMY_START_OFFSET (0)
-
-#define CALL_DUMMY_BREAKPOINT_OFFSET (0)
-
-#define CALL_DUMMY_ADDRESS() alpha_call_dummy_address()
-extern CORE_ADDR alpha_call_dummy_address (void);
-
-/* Insert the specified number of args and function address
- into a call sequence of the above form stored at DUMMYNAME.
- We only have to set RA_REGNUM to the dummy breakpoint address
- and T12_REGNUM (the `procedure value register') to the function address. */
-
-#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \
- alpha_fix_call_dummy ((dummyname), (pc), (fun), (nargs), (args), \
- (type), (gcc_p))
-extern void alpha_fix_call_dummy (char *, CORE_ADDR, CORE_ADDR, int,
- struct value **, struct type *, int);
-
-/* There's a mess in stack frame creation. See comments in blockframe.c
- near reference to INIT_FRAME_PC_FIRST. */
-
-#define INIT_FRAME_PC(fromleaf, prev) init_frame_pc_noop ((fromleaf), (prev))
-
-#define INIT_FRAME_PC_FIRST(fromleaf, prev) \
- alpha_init_frame_pc_first ((fromleaf), (prev))
-extern void alpha_init_frame_pc_first (int, struct frame_info *);
-
/* Special symbol found in blocks associated with routines. We can hang
alpha_extra_func_info_t's off of this. */
#define MIPS_EFI_SYMBOL_NAME "__GDB_EFI_INFO__"
extern void ecoff_relocate_efi (struct symbol *, CORE_ADDR);
+#define RA_REGNUM 26 /* XXXJRT needed by mdebugread.c */
+
/* Specific information about a procedure.
This overlays the ALPHA's PDR records,
alpharead.c (ab)uses this to save memory */
#define mips_extra_func_info_t alpha_extra_func_info_t
-#define INIT_EXTRA_FRAME_INFO(fromleaf, fci) \
- alpha_init_extra_frame_info(fromleaf, fci)
-extern void alpha_init_extra_frame_info (int, struct frame_info *);
-
#define PRINT_EXTRA_FRAME_INFO(fi) alpha_print_extra_frame_info ((fi))
extern void alpha_print_extra_frame_info (struct frame_info *);
projects / deliverable / binutils-gdb.git / blobdiff