dnl Autoconf configure script for GDB, the GNU debugger.
-dnl Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-dnl 2005, 2006, 2007, 2008, 2009, 2010
+dnl Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
+dnl 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
dnl Free Software Foundation, Inc.
dnl
dnl This file is part of GDB.
[Relocated directory for source files. ])
])
-AC_CONFIG_SUBDIRS(doc testsuite)
+AC_CONFIG_SUBDIRS(testsuite)
# Check whether to support alternative target configurations
AC_ARG_ENABLE(targets,
READLINE=-lreadline
READLINE_DEPS=
READLINE_CFLAGS=
+ READLINE_TEXI_INCFLAG=
# readline-6.0 started to use the name `_rl_echoing_p'.
# `$(READLINE_DIR)/' of bundled readline would not resolve in configure.
READLINE='$(READLINE_DIR)/libreadline.a'
READLINE_DEPS='$(READLINE)'
READLINE_CFLAGS='-I$(READLINE_SRC)/..'
+ READLINE_TEXI_INCFLAG='-I $(READLINE_DIR)'
fi
AC_SUBST(READLINE)
AC_SUBST(READLINE_DEPS)
AC_SUBST(READLINE_CFLAGS)
+AC_SUBST(READLINE_TEXI_INCFLAG)
AC_ARG_WITH(expat,
AS_HELP_STRING([--with-expat], [include expat support (auto/yes/no)]),
CPPFLAGS="$CPPFLAGS $new_CPPFLAGS"
LIBS="$LIBS $new_LIBS"
found_usable_python=no
- AC_LINK_IFELSE(AC_LANG_PROGRAM([[#include "${version}/Python.h"]],
+ AC_LINK_IFELSE(AC_LANG_PROGRAM([[#include "Python.h"]],
[[Py_Initialize ();]]),
[have_libpython_var=${version}
- found_usable_python=yes],
- [CPPFLAGS=$save_CPPFLAGS
- LIBS=$save_LIBS])
+ found_usable_python=yes
+ PYTHON_CPPFLAGS=$new_CPPFLAGS
+ PYTHON_LIBS=$new_LIBS])
+ CPPFLAGS=$save_CPPFLAGS
+ LIBS=$save_LIBS
AC_MSG_RESULT([${found_usable_python}])
])
dnl yes - Include python support, error if it's missing.
dnl If we find python in $PATH, use it to fetch configure options,
dnl otherwise assume the compiler can find it with no help from us.
-dnl Python 2.6, 2.5, and then 2.4 are tried in turn.
+dnl Python 2.7, 2.6, 2.5, and then 2.4 are tried in turn.
dnl auto - Same as "yes", but if python is missing from the system,
dnl fall back to "no".
dnl /path/to/python/exec-prefix -
dnl the compilation parameters. Otherwise use
dnl -I/path/to/python/exec-prefix/include,
dnl -L/path/to/python/exec-prefix/lib.
-dnl Python 2.6, 2.5, and then 2.4 are tried in turn.
+dnl Python 2.7, 2.6, 2.5, and then 2.4 are tried in turn.
dnl NOTE: This case is historical. It is what was done for 7.0/7.1
dnl but is deprecated.
dnl /path/to/python/executable -
# Assume the python binary is ${with_python}/bin/python.
python_prog="${with_python}/bin/python"
python_prefix=
+ # If python does not exit ${with_python}/bin, then try in
+ # ${with_python}. On Windows/MinGW, this is where the Python
+ # executable is.
+ if test ! -x "${python_prog}"; then
+ python_prog="${with_python}/python"
+ python_prefix=
+ fi
if test ! -x "${python_prog}"; then
# Fall back to gdb 7.0/7.1 behaviour.
python_prog=missing
fi
fi
else
- # Fall back to gdb 7.0/7.1 behaviour.
- if test -z ${python_prefix}; then
- python_includes=
- python_libs=
- else
- python_includes="-I${python_prefix}/include"
- python_libs="-L${python_prefix}/lib"
- fi
+ # We do not have a python executable we can use to determine where
+ # to find the Python headers and libs. We cannot guess the include
+ # path from the python_prefix either, because that include path
+ # depends on the Python version. So, there is nothing much we can
+ # do except assume that the compiler will be able to find those files.
+ python_includes=
+ python_libs=
have_python_config=no
fi
- # Having "/pythonX.Y" in the include path is awkward.
- # All those python headers get bubbled up to the top inviting lots
- # of random collisions. GDB originally didn't use python-config to
- # find the compilation parameters and includes "pythonX.Y/" in the
- # path of the, umm, include file. So strip away this part of the
- # output of python-config --includes.
- python_includes=`echo "${python_includes} " \
- | sed -e 's,/python[[0-9]]*[[.]][[0-9]]* , ,g'`
-
# If we have python-config, only try the configuration it provides.
# Otherwise fallback on the old way of trying different versions of
# python in turn.
have_libpython=no
if test "${have_python_config}" = yes; then
+ # Determine the Python version by extracting "-lpython<version>"
+ # part of the python_libs. <version> is usually X.Y with X and Y
+ # being decimal numbers, but can also be XY (seen on Windows).
+ #
+ # The extraction is performed using sed with a regular expression.
+ # Initially, the regexp used was using the '?' quantifier to make
+ # the dot in the version number optional. Unfortunately, this
+ # does not work with non-GNU versions of sed because, because of
+ # what looks like a limitation (the '?' quantifier does not work
+ # with back-references). We work around this limitation by using
+ # the '*' quantifier instead. It means that, in theory, we might
+ # match unexpected version strings such as "-lpython2..7", but
+ # this seems unlikely in practice. And even if that happens,
+ # an error will be triggered later on, when checking that version
+ # number.
python_version=`echo " ${python_libs} " \
- | sed -e 's,^.* -l\(python[[0-9]]*[[.]][[0-9]]*\) .*$,\1,'`
+ | sed -e 's,^.* -l\(python[[0-9]]*[[.]]*[[0-9]]*\).*$,\1,'`
case "${python_version}" in
python*)
AC_TRY_LIBPYTHON(${python_version}, have_libpython,
;;
esac
elif test "${have_python_config}" != failed; then
+ if test "${have_libpython}" = no; then
+ AC_TRY_LIBPYTHON(python2.7, have_libpython,
+ ${python_includes}, "${python_libs} -lpython2.7")
+ fi
if test "${have_libpython}" = no; then
AC_TRY_LIBPYTHON(python2.6, have_libpython,
${python_includes}, "${python_libs} -lpython2.6")
${python_includes}, "${python_libs} -lpython2.4")
fi
fi
- if test "${have_libpython}" = python2.7; then
+ if test "${have_libpython}" = python2.7 -o "${have_libpython}" = python27; then
AC_DEFINE(HAVE_LIBPYTHON2_7, 1, [Define if Python 2.7 is being used.])
- elif test "${have_libpython}" = python2.6; then
+ elif test "${have_libpython}" = python2.6 -o "${have_libpython}" = python26; then
AC_DEFINE(HAVE_LIBPYTHON2_6, 1, [Define if Python 2.6 is being used.])
- elif test "${have_libpython}" = python2.5; then
+ elif test "${have_libpython}" = python2.5 -o "${have_libpython}" = python25; then
AC_DEFINE(HAVE_LIBPYTHON2_5, 1, [Define if Python 2.5 is being used.])
- elif test "${have_libpython}" = python2.4; then
+ elif test "${have_libpython}" = python2.4 -o "${have_libpython}" = python24; then
AC_DEFINE(HAVE_LIBPYTHON2_4, 1, [Define if Python 2.4 is being used.])
fi
CONFIG_OBS="$CONFIG_OBS \$(SUBDIR_PYTHON_OBS)"
CONFIG_DEPS="$CONFIG_DEPS \$(SUBDIR_PYTHON_DEPS)"
CONFIG_SRCS="$CONFIG_SRCS \$(SUBDIR_PYTHON_SRCS)"
+ CONFIG_INSTALL="$CONFIG_INSTALL install-python"
ENABLE_CFLAGS="$ENABLE_CFLAGS \$(SUBDIR_PYTHON_CFLAGS)"
# Flags needed to compile Python code (taken from python-config --cflags).
done
AC_MSG_RESULT(${PYTHON_CFLAGS})
fi
+
+ # On IRIX, type siginfo is not defined. Instead, sys/siginfo.h provides:
+ # #if _SGIAPI
+ # #define siginfo __siginfo
+ # #endif
+ # The problem is that including Python causes some XOPEN macros to be
+ # unilaterally defined, and that in turn causes _SGIAPI to evaluate
+ # to false. So, we work around this issue by defining siginfo ourself
+ # though the command-line.
+ case "$gdb_host" in
+ irix*) if test "${GCC}" = yes; then
+ CPPFLAGS="$CPPFLAGS -Dsiginfo=__siginfo"
+ fi
+ ;;
+ esac
else
# Even if Python support is not compiled in, we need to have these files
# included.
python/py-prettyprint.c python/py-auto-load.c"
fi
AC_SUBST(PYTHON_CFLAGS)
+AC_SUBST(PYTHON_CPPFLAGS)
+AC_SUBST(PYTHON_LIBS)
# ------------------------- #
# Checks for header files. #
AC_FUNC_MMAP
AC_FUNC_VFORK
AC_CHECK_FUNCS([canonicalize_file_name realpath getrusage getuid \
- getgid pipe poll pread64 sbrk setpgid setpgrp setsid \
+ getgid pipe poll pread64 resize_term sbrk setpgid setpgrp setsid \
sigaction sigprocmask sigsetmask socketpair syscall \
- ttrace wborder setlocale iconvlist libiconvlist btowc \
- setrlimit getrlimit posix_madvise])
+ ttrace wborder wresize setlocale iconvlist libiconvlist btowc \
+ setrlimit getrlimit posix_madvise waitpid])
AM_LANGINFO_CODESET
# Check the return and argument types of ptrace. No canned test for
if test ${build} = ${host} -a ${host} = ${target} ; then
case ${host_os} in
- hpux*)
- AC_MSG_CHECKING(for HPUX/OSF thread support)
- if test -f /usr/include/dce/cma_config.h ; then
- if test "$GCC" = "yes" ; then
- AC_MSG_RESULT(yes)
- AC_DEFINE(HAVE_HPUX_THREAD_SUPPORT, 1,
- [Define if you have HPUX threads])
- CONFIG_OBS="${CONFIG_OBS} hpux-thread.o"
- CONFIG_SRCS="${CONFIG_SRCS} hpux-thread.c"
- else
- AC_MSG_RESULT(no (suppressed because you are not using GCC))
- fi
- else
- AC_MSG_RESULT(no)
- fi
- ;;
solaris*)
# See if thread_db library is around for Solaris thread debugging.
# Note that we must explicitly test for version 1 of the library
CONFIG_SRCS="${CONFIG_SRCS} aix-thread.c"
CONFIG_OBS="${CONFIG_OBS} aix-thread.o"
CONFIG_LDFLAGS="${CONFIG_LDFLAGS} -lpthdebug"
+
+ # Older versions of AIX do not provide the declaration for
+ # the getthrds function (it appears that it was introduced
+ # with AIX 6.x).
+ AC_CHECK_DECLS(getthrds, [], [], [[#include <procinfo.h>]])
fi
;;
esac
CFLAGS="$CFLAGS -I${srcdir}/../include -I../bfd -I${srcdir}/../bfd"
LDFLAGS="$LDFLAGS -L../bfd -L../libiberty"
intl=`echo $LIBINTL | sed 's,${top_builddir}/,,g'`
+# -ldl is provided by bfd/Makfile.am (LIBDL) <PLUGINS>.
+if test "$plugins" = "yes"; then
+ LIBS="-ldl $LIBS"
+fi
LIBS="-lbfd -liberty $intl $LIBS"
AC_CACHE_CHECK([for ELF support in BFD], gdb_cv_var_elf,
[AC_TRY_LINK(
CONFIG_OBS="$CONFIG_OBS elfread.o"
AC_DEFINE(HAVE_ELF, 1,
[Define if ELF support should be included.])
+ # -ldl is provided by bfd/Makfile.am (LIBDL) <PLUGINS>.
+ if test "$plugins" = "yes"; then
+ OLD_LIBS="-ldl $OLD_LIBS"
+ fi
fi
CFLAGS=$OLD_CFLAGS
LDFLAGS=$OLD_LDFLAGS
AC_CONFIG_SUBDIRS(multi-ice)
fi
-# We only build gdbserver automatically in a native configuration.
-if test "$gdb_native" = "yes"; then
+AC_ARG_ENABLE(gdbserver,
+AS_HELP_STRING([--enable-gdbserver],
+ [automatically build gdbserver (yes/no/auto, default is auto)]),
+[case "${enableval}" in
+ yes| no|auto) ;;
+ *) AC_MSG_ERROR(bad value ${enableval} for --enable-gdbserver option) ;;
+esac],[enable_gdbserver=auto])
+
+# We only build gdbserver automatically in a native configuration, and
+# only if the user did not explicitly disable its build.
+if test "$gdb_native" = "yes" -a "$enable_gdbserver" != "no"; then
AC_MSG_CHECKING(whether gdbserver is supported on this host)
if test "x$build_gdbserver" = xyes; then
AC_MSG_RESULT(yes)
AC_CONFIG_SUBDIRS(gdbserver)
+ gdbserver_build_enabled=yes
else
AC_MSG_RESULT(no)
fi
fi
+# If the user explicitly request the gdbserver to be built, verify that
+# we were in fact able to enable it.
+if test "$enable_gdbserver" = "yes" -a "$gdbserver_build_enabled" != "yes"; then
+ AC_MSG_ERROR(Automatic gdbserver build is not supported for this configuration)
+fi
+
# If nativefile (NAT_FILE) is not set in config/*/*.m[ht] files, we link
# to an empty version.
AC_DEFINE(GDB_DEFAULT_HOST_CHARSET, "UTF-8",
[Define to be a string naming the default host character set.])
-AC_OUTPUT(Makefile .gdbinit:gdbinit.in gnulib/Makefile,
+AC_OUTPUT(Makefile .gdbinit:gdbinit.in doc/Makefile gnulib/Makefile data-directory/Makefile,
[
case x$CONFIG_HEADERS in
xconfig.h:config.in)
projects / deliverable / binutils-gdb.git / blobdiff