dnl Autoconf configure script for GDB, the GNU debugger.
-dnl Copyright 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+dnl Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+dnl 2005, 2006
dnl Free Software Foundation, Inc.
dnl
dnl This file is part of GDB.
dnl
dnl This program is free software; you can redistribute it and/or modify
dnl it under the terms of the GNU General Public License as published by
-dnl the Free Software Foundation; either version 2 of the License, or
+dnl the Free Software Foundation; either version 3 of the License, or
dnl (at your option) any later version.
-dnl
+dnl
dnl This program is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
dnl GNU General Public License for more details.
-dnl
+dnl
dnl You should have received a copy of the GNU General Public License
-dnl along with this program; if not, write to the Free Software
-dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
dnl Process this file with autoconf to produce a configure script.
CONFIG_INSTALL=
CONFIG_UNINSTALL=
-dnl Set up for gettext. PACKAGE is used when we call bindtextdomain.
-
-CY_GNU_GETTEXT
+dnl Set up for gettext.
+ZW_GNU_GETTEXT_SISTER_DIR
localedir='${datadir}/locale'
AC_SUBST(localedir)
-if test "x$POSUB" != x; then
-
- dnl Lifted from GCC's config/gettext.m4.
- AC_MSG_CHECKING(for catalogs to be installed)
- # Look for .po and .gmo files in the source directory.
- CATALOGS= AC_SUBST(CATALOGS)
- XLINGUAS=
- for cat in $srcdir/po/*.gmo $srcdir/po/*.po; do
- # If there aren't any .gmo files the shell will give us the
- # literal string "../path/to/srcdir/po/*.gmo" which has to be
- # weeded out.
- case "$cat" in *\**)
- continue;;
- esac
- # The quadruple backslash is collapsed to a double backslash
- # by the backticks, then collapsed again by the double quotes,
- # leaving us with one backslash in the sed expression (right
- # before the dot that mustn't act as a wildcard).
- cat=`echo $cat | sed -e "s!$srcdir/!!" -e "s!\\\\.po!.gmo!"`
- lang=`echo $cat | sed -e 's!po/!!' -e "s!\\\\.gmo!!"`
- # The user is allowed to set LINGUAS to a list of languages to
- # install catalogs for. If it's empty that means "all of them."
- if test "x$LINGUAS" = x; then
- CATALOGS="$CATALOGS $cat"
- XLINGUAS="$XLINGUAS $lang"
- else
- case "$LINGUAS" in *$lang*)
- CATALOGS="$CATALOGS $cat"
- XLINGUAS="$XLINGUAS $lang"
- ;;
- esac
- fi
- done
- LINGUAS="$XLINGUAS"
- AC_MSG_RESULT($LINGUAS)
-
+if test x"$USE_NLS" = xyes; then
CONFIG_ALL="$CONFIG_ALL all-po"
CONFIG_CLEAN="$CONFIG_CLEAN clean-po"
CONFIG_INSTALL="$CONFIG_INSTALL install-po"
[Global directory for separate debug files. ])
#AC_DEFINE_UNQUOTED(DEBUGDIR, "$debugdir"),
+if test "x$exec_prefix" = xNONE || test "x$exec_prefix" = 'x${prefix}'; then
+ if test "x$prefix" = xNONE; then
+ test_prefix=/usr/local
+ else
+ test_prefix=$prefix
+ fi
+else
+ test_prefix=$exec_prefix
+fi
+case ${debugdir} in
+"${test_prefix}"|"${test_prefix}/"*|\
+'${exec_prefix}'|'${exec_prefix}/'*)
+ AC_DEFINE(DEBUGDIR_RELOCATABLE, 1, [Define if the debug directory should be relocated when GDB is moved.])
+ ;;
+esac
+
AC_CONFIG_SUBDIRS(doc testsuite)
+# Check whether to support alternative target configurations
+AC_ARG_ENABLE(targets,
+[ --enable-targets alternative target configurations],
+[case "${enableval}" in
+ yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
+ ;;
+ no) enable_targets= ;;
+ *) enable_targets=$enableval ;;
+esac])
+
+# Check whether to enable 64-bit support on 32-bit hosts
+AC_ARG_ENABLE(64-bit-bfd,
+[ --enable-64-bit-bfd 64-bit support (on hosts with narrower word sizes)],
+[case "${enableval}" in
+ yes) want64=true ;;
+ no) want64=false ;;
+ *) AC_MSG_ERROR(bad value ${enableval} for 64-bit-bfd option) ;;
+esac],[want64=false])dnl
+
+# Provide defaults for some variables set by the per-host and per-target
+# configuration.
+gdb_host_obs=posix-hdep.o
+
+if test "${target}" = "${host}"; then
+ gdb_native=yes
+else
+ gdb_native=no
+fi
+
. $srcdir/configure.host
-. $srcdir/configure.tgt
+# Accumulate some settings from configure.tgt over all enabled targets
+
+TARGET_OBS=
+all_targets=
+
+for targ_alias in `echo $target_alias $enable_targets | sed 's/,/ /g'`
+do
+ if test "$targ_alias" = "all"; then
+ all_targets=true
+ else
+ # Canonicalize the secondary target names.
+ result=`$ac_config_sub $targ_alias 2>/dev/null`
+ if test -n "$result"; then
+ targ=$result
+ else
+ targ=$targ_alias
+ fi
+
+ . ${srcdir}/configure.tgt
+
+ # Target-specific object files
+ for i in ${gdb_target_obs}; do
+ case " $TARGET_OBS " in
+ *" ${i} "*) ;;
+ *)
+ TARGET_OBS="$TARGET_OBS ${i}"
+ ;;
+ esac
+ done
+
+ # Check whether this target needs 64-bit CORE_ADDR
+ if test x${want64} = xfalse; then
+ . ${srcdir}/../bfd/config.bfd
+ fi
+ fi
+done
+
+if test x${all_targets} = xtrue; then
+
+ # We want all 64-bit targets if we either:
+ # - run on a 64-bit host or
+ # - already require 64-bit support for some other target or
+ # - the --enable-64-bit-bfd option was supplied
+ # Otherwise we only support all 32-bit targets.
+ #
+ # NOTE: This test must be in sync with the corresponding
+ # tests in BFD!
+
+ if test x${want64} = xfalse; then
+ AC_CHECK_SIZEOF(long)
+ if test "x${ac_cv_sizeof_long}" = "x8"; then
+ want64=true
+ fi
+ fi
+ if test x${want64} = xtrue; then
+ TARGET_OBS='$(ALL_TARGET_OBS) $(ALL_64_TARGET_OBS)'
+ else
+ TARGET_OBS='$(ALL_TARGET_OBS)'
+ fi
+fi
+
+AC_SUBST(TARGET_OBS)
+
+# For other settings, only the main target counts.
+gdb_sim=
+gdb_osabi=
+build_gdbserver=
+targ=$target; . ${srcdir}/configure.tgt
# Fetch the default architecture and default target vector from BFD.
targ=$target; . $srcdir/../bfd/config.bfd
if test x"$enable_libunwind" = xyes; then
AC_CHECK_HEADERS(libunwind.h)
AC_CHECK_HEADERS(libunwind-ia64.h)
- AC_DEFINE(HAVE_LIBUNWIND, 1)
+ AC_DEFINE(HAVE_LIBUNWIND, 1, [Define if libunwind library is being used.])
CONFIG_OBS="$CONFIG_OBS libunwind-frame.o"
CONFIG_DEPS="$CONFIG_DEPS libunwind-frame.o"
CONFIG_SRCS="$CONFIG_SRCS libunwind-frame.c"
AC_DEFINE(HAVE__ETEXT, 1,
[Define to 1 if your system has the _etext variable. ])
fi
+AC_CACHE_CHECK([for etext], ac_cv_var_etext,
+[AC_TRY_LINK(
+[#include <stdlib.h>
+extern char etext;
+],
+[free (&etext);], ac_cv_var_etext=yes, ac_cv_var_etext=no)])
+if test $ac_cv_var_etext = yes; then
+ AC_DEFINE(HAVE_ETEXT, 1,
+ [Define to 1 if your system has the etext variable. ])
+fi
if test "$enable_profiling" = yes ; then
if test $ac_cv_func_monstartup = no || test $ac_cv_func__mcleanup = no; then
AC_MSG_ERROR(--enable-profiling requires monstartup and _mcleanup)
# a situation.
AC_SEARCH_LIBS(waddstr, [ncurses cursesX curses])
+# On HP/UX we may need libxpdl for dlgetmodinfo (used by solib-pa64.c).
+AC_SEARCH_LIBS(dlgetmodinfo, [dl xpdl])
+
# Since GDB uses Readline, we need termcap functionality. In many
# cases this will be provided by the curses library, but some systems
# have a seperate termcap library, or no curses library at all.
go32* | *djgpp*)
ac_cv_search_tgetent="none required"
;;
+ *mingw32*)
+ ac_cv_search_tgetent="none required"
+ CONFIG_OBS="$CONFIG_OBS win32-termcap.o"
+ ;;
esac
# These are the libraries checked by Readline.
AC_MSG_ERROR([no termcap library found])
fi
+AC_ARG_WITH([system-readline],
+ [AS_HELP_STRING([--with-system-readline],
+ [use installed readline library])])
+
+if test "$with_system_readline" = yes; then
+ READLINE=-lreadline
+ READLINE_DEPS=
+ READLINE_CFLAGS=
+else
+ READLINE='$(READLINE_DIR)/libreadline.a'
+ READLINE_DEPS='$(READLINE)'
+ READLINE_CFLAGS='-I$(READLINE_SRC)/..'
+fi
+AC_SUBST(READLINE)
+AC_SUBST(READLINE_DEPS)
+AC_SUBST(READLINE_CFLAGS)
+
+AC_ARG_WITH(expat,
+ AS_HELP_STRING([--with-expat], [include expat support (auto/yes/no)]),
+ [], [with_expat=auto])
+AC_MSG_CHECKING([whether to use expat])
+AC_MSG_RESULT([$with_expat])
+
+if test "${with_expat}" = no; then
+ AC_MSG_WARN([expat support disabled; some features may be unavailable.])
+ HAVE_LIBEXPAT=no
+else
+ AC_LIB_HAVE_LINKFLAGS([expat], [], [#include "expat.h"],
+ [XML_Parser p = XML_ParserCreate (0);])
+ if test "$HAVE_LIBEXPAT" != yes; then
+ if test "$with_expat" = yes; then
+ AC_MSG_ERROR([expat is missing or unusable])
+ else
+ AC_MSG_WARN([expat is missing or unusable; some features may be unavailable.])
+ fi
+ else
+ save_LIBS=$LIBS
+ LIBS="$LIBS $LIBEXPAT"
+ AC_CHECK_FUNCS(XML_StopParser)
+ LIBS=$save_LIBS
+ fi
+fi
+
# ------------------------- #
# Checks for header files. #
# ------------------------- #
AC_CHECK_HEADERS(machine/reg.h)
AC_CHECK_HEADERS(poll.h sys/poll.h)
AC_CHECK_HEADERS(proc_service.h thread_db.h gnu/libc-version.h)
+AC_CHECK_HEADERS(signal.h)
AC_CHECK_HEADERS(stddef.h)
AC_CHECK_HEADERS(stdlib.h)
AC_CHECK_HEADERS(stdint.h)
AC_CHECK_HEADERS(sys/filio.h)
AC_CHECK_HEADERS(sys/ioctl.h)
AC_CHECK_HEADERS(sys/param.h)
+AC_CHECK_HEADERS(sys/resource.h)
AC_CHECK_HEADERS(sys/proc.h, [], [],
[#if HAVE_SYS_PARAM_H
# include <sys/param.h>
#endif
])
+# Check for HP/UX 64-bit shared library support
+AC_CHECK_HEADERS(elf_hp.h)
+
# FIXME: kettenis/20030102: In most cases we include these
# unconditionally, so what's the point in checking these?
AC_CHECK_HEADERS(ctype.h time.h)
+# Create a header we can use portably to get the standard integer types.
+GCC_HEADER_STDINT(gdb_stdint.h)
+
# ------------------------- #
# Checks for declarations. #
# ------------------------- #
# ------------------ #
AC_TYPE_SIGNAL
+AC_CHECK_TYPES(socklen_t, [], [],
+[#include <sys/types.h>
+#include <sys/socket.h>
+])
+AC_CHECK_TYPES(uintptr_t, [], [], [#include <stdint.h>])
# ------------------------------------- #
# Checks for compiler characteristics. #
AC_C_CONST
AC_C_INLINE
+AC_C_BIGENDIAN
# ------------------------------ #
# Checks for library functions. #
AC_FUNC_MMAP
AC_FUNC_VFORK
AC_CHECK_FUNCS(canonicalize_file_name realpath)
+AC_CHECK_FUNCS(getrusage)
AC_CHECK_FUNCS(getuid getgid)
AC_CHECK_FUNCS(poll)
AC_CHECK_FUNCS(pread64)
[gdb_cv_have_ptrace_getregs=no])])
AC_MSG_RESULT($gdb_cv_have_ptrace_getregs)
if test $gdb_cv_have_ptrace_getregs = yes; then
- AC_DEFINE(HAVE_PTRACE_GETREGS)
+ AC_DEFINE(HAVE_PTRACE_GETREGS, 1,
+ [Define if sys/ptrace.h defines the PTRACE_GETREGS request.])
fi
# See if <sys/ptrace.h> provides the PTRACE_GETFPXREGS request.
[gdb_cv_have_ptrace_getfpxregs=no])])
AC_MSG_RESULT($gdb_cv_have_ptrace_getfpxregs)
if test $gdb_cv_have_ptrace_getfpxregs = yes; then
- AC_DEFINE(HAVE_PTRACE_GETFPXREGS)
+ AC_DEFINE(HAVE_PTRACE_GETFPXREGS, 1,
+ [Define if sys/ptrace.h defines the PTRACE_GETFPXREGS request.])
fi
# See if <sys/ptrace.h> provides the PT_GETDBREGS request.
[gdb_cv_have_pt_getdbregs=no])])
AC_MSG_RESULT($gdb_cv_have_pt_getdbregs)
if test $gdb_cv_have_pt_getdbregs = yes; then
- AC_DEFINE(HAVE_PT_GETDBREGS)
+ AC_DEFINE(HAVE_PT_GETDBREGS, 1,
+ [Define if sys/ptrace.h defines the PT_GETDBREGS request.])
fi
# See if <sys/ptrace.h> provides the PT_GETXMMREGS request.
[gdb_cv_have_pt_getxmmregs=no])])
AC_MSG_RESULT($gdb_cv_have_pt_getxmmregs)
if test $gdb_cv_have_pt_getxmmregs = yes; then
- AC_DEFINE(HAVE_PT_GETXMMREGS)
+ AC_DEFINE(HAVE_PT_GETXMMREGS, 1,
+ [Define if sys/ptrace.h defines the PT_GETXMMREGS request.])
fi
-# See if stdint.h provides the uintptr_t type.
-# Autoconf 2.5X has an improved AC_CHECK_TYPE which will simplify this.
-AC_CACHE_CHECK([for uintptr_t in stdint.h], gdb_cv_have_uintptr_t,
- [AC_TRY_COMPILE(
- [#include <stdint.h>],
- [uintptr_t foo = 0;],
- gdb_cv_have_uintptr_t=yes,
- gdb_cv_have_uintptr_t=no)])
-if test $gdb_cv_have_uintptr_t = yes; then
- AC_DEFINE(HAVE_UINTPTR_T, 1, [Define if <stdint.h> provides the uintptr_t type.])
-fi
-
-# If we are configured native on GNU/Linux, work around problems with
-# sys/procfs.h
-# Also detect which type of /proc is in use, such as for Unixware or Solaris.
+# Detect which type of /proc is in use, such as for Unixware or Solaris.
if test "${target}" = "${host}"; then
case "${host}" in
- i[[3456]]86-*-linux*)
- AC_DEFINE(START_INFERIOR_TRAPS_EXPECTED,2)
- AC_DEFINE(sys_quotactl)
- ;;
*-*-unixware* | *-*-sysv4.2* | *-*-sysv5* | *-*-interix* )
- AC_DEFINE(NEW_PROC_API)
+ AC_DEFINE(NEW_PROC_API, 1,
+ [Define if you want to use new multi-fd /proc interface
+ (replaces HAVE_MULTIPLE_PROC_FDS as well as other macros).])
;;
- *-*-solaris2.[[6789]] | *-*-solaris2.1[[0-9]])
- AC_DEFINE(NEW_PROC_API)
+ *-*-solaris2.[[6789]] | *-*-solaris2.1[[0-9]]*)
+ AC_DEFINE(NEW_PROC_API, 1,
+ [Define if you want to use new multi-fd /proc interface
+ (replaces HAVE_MULTIPLE_PROC_FDS as well as other macros).])
;;
mips-sgi-irix5*)
# Work around <sys/proc.h> needing _KMEMUSER problem on IRIX 5.
- AC_DEFINE([_KMEMUSER], 1)
+ AC_DEFINE([_KMEMUSER], 1,
+ [Define to 1 so <sys/proc.h> gets a definition of anon_hdl. Works
+ around a <sys/proc.h> problem on IRIX 5.])
;;
esac
fi
gdb_cv_prfpregset_t_broken=yes)])
AC_MSG_RESULT($gdb_cv_prfpregset_t_broken)
if test $gdb_cv_prfpregset_t_broken = yes; then
- AC_DEFINE(PRFPREGSET_T_BROKEN)
+ AC_DEFINE(PRFPREGSET_T_BROKEN, 1,
+ [Define if the prfpregset_t type is broken.])
fi
fi
gdb_cv_have_procfs_piocset=yes, gdb_cv_have_procfs_piocset=no)])
AC_MSG_RESULT($gdb_cv_have_procfs_piocset)
if test $gdb_cv_have_procfs_piocset = yes; then
- AC_DEFINE(HAVE_PROCFS_PIOCSET)
+ AC_DEFINE(HAVE_PROCFS_PIOCSET, 1,
+ [Define if ioctl argument PIOCSET is available.])
fi
fi
gdb_cv_have_struct_link_map_with_l_members=no)])
AC_MSG_RESULT($gdb_cv_have_struct_link_map_with_l_members)
if test $gdb_cv_have_struct_link_map_with_l_members = yes; then
- AC_DEFINE(HAVE_STRUCT_LINK_MAP_WITH_L_MEMBERS)
+ AC_DEFINE(HAVE_STRUCT_LINK_MAP_WITH_L_MEMBERS,1,
+ [Define if <link.h> exists and defines struct link_map which has
+ members with an ``l_'' prefix. (For Solaris, SVR4, and
+ SVR4-like systems.)])
fi
dnl Check for struct link_map with lm_ members which are indicative
gdb_cv_have_struct_link_map_with_lm_members=no)])
AC_MSG_RESULT($gdb_cv_have_struct_link_map_with_lm_members)
if test $gdb_cv_have_struct_link_map_with_lm_members = yes; then
- AC_DEFINE(HAVE_STRUCT_LINK_MAP_WITH_LM_MEMBERS)
+ AC_DEFINE(HAVE_STRUCT_LINK_MAP_WITH_LM_MEMBERS, 1,
+ [Define if <link.h> exists and defines struct link_map which has
+ members with an ``lm_'' prefix. (For SunOS.)])
fi
dnl Check for struct so_map with som_ members which are found on
gdb_cv_have_struct_so_map_with_som_members=no)])
AC_MSG_RESULT($gdb_cv_have_struct_so_map_with_som_members)
if test $gdb_cv_have_struct_so_map_with_som_members = yes; then
- AC_DEFINE(HAVE_STRUCT_SO_MAP_WITH_SOM_MEMBERS)
+ AC_DEFINE(HAVE_STRUCT_SO_MAP_WITH_SOM_MEMBERS, 1,
+ [Define if <link.h> exists and defines a struct so_map which has
+ members with an ``som_'' prefix. (Found on older *BSD systems.)])
fi
dnl Check for struct link_map32 type, which allows a 64-bit Solaris
gdb_cv_have_struct_link_map32=no)])
AC_MSG_RESULT($gdb_cv_have_struct_link_map32)
if test $gdb_cv_have_struct_link_map32 = yes; then
- AC_DEFINE(HAVE_STRUCT_LINK_MAP32)
- AC_DEFINE(_SYSCALL32)
+ AC_DEFINE(HAVE_STRUCT_LINK_MAP32, 1,
+ [Define if <sys/link.h> has struct link_map32])
+ AC_DEFINE(_SYSCALL32, 1,
+ [Define if <sys/link.h> has link_map32 (solaris sparc-64 target)])
fi
fi
[Define to 1 if the "%ll" format works to print long longs.])
fi
+# Check if the compiler and runtime support printing decfloats.
+
+AC_CACHE_CHECK([for decfloat support in printf],
+ gdb_cv_printf_has_decfloat,
+ [AC_RUN_IFELSE([AC_LANG_PROGRAM([AC_INCLUDES_DEFAULT],
+[[char buf[64];
+ _Decimal32 d32 = 1.2345df;
+ _Decimal64 d64 = 1.2345dd;
+ _Decimal128 d128 = 1.2345dl;
+ sprintf (buf, "Decimal32: %H\nDecimal64: %D\nDecimal128: %DD", d32, d64, d128);
+ return (strcmp ("Decimal32: 1.2345\nDecimal64: 1.2345\nDecimal128: 1.2345", buf));]])],
+ gdb_cv_printf_has_decfloat=yes,
+ gdb_cv_printf_has_decfloat=no,
+ gdb_cv_printf_has_decfloat=no)])
+if test $gdb_cv_printf_has_decfloat = yes; then
+ AC_DEFINE(PRINTF_HAS_DECFLOAT, 1,
+ [Define to 1 if the "%H, %D and %DD" formats work to print decfloats.])
+fi
+
# Check if the compiler supports the `long double' type. We can't use
# AC_C_LONG_DOUBLE because that one does additional checks on the
# constants defined in <float.h> that fail on some systems,
if test -f /usr/include/dce/cma_config.h ; then
if test "$GCC" = "yes" ; then
AC_MSG_RESULT(yes)
- AC_DEFINE(HAVE_HPUX_THREAD_SUPPORT)
+ AC_DEFINE(HAVE_HPUX_THREAD_SUPPORT, 1,
+ [Define if you have HPUX threads])
CONFIG_OBS="${CONFIG_OBS} hpux-thread.o"
CONFIG_SRCS="${CONFIG_SRCS} hpux-thread.c"
else
AC_MSG_CHECKING(for Solaris thread debugging library)
if test -f /usr/lib/libthread_db.so.1 ; then
AC_MSG_RESULT(yes)
- AC_DEFINE(HAVE_THREAD_DB_LIB)
+ AC_DEFINE(HAVE_THREAD_DB_LIB, 1,
+ [Define if using Solaris thread debugging.])
CONFIG_OBS="${CONFIG_OBS} sol-thread.o"
CONFIG_SRCS="${CONFIG_SRCS} sol-thread.c"
AC_CHECK_LIB(dl, dlopen)
])
AC_MSG_RESULT($gdb_cv_proc_service_is_old)
if test $gdb_cv_proc_service_is_old = yes; then
- AC_DEFINE(PROC_SERVICE_IS_OLD)
+ AC_DEFINE(PROC_SERVICE_IS_OLD, 1,
+ [Define if <proc_service.h> on solaris uses int instead of
+ size_t, and assorted other type changes.])
fi
else
AC_MSG_RESULT(no)
AC_SUBST(CONFIG_LDFLAGS)
fi
-dnl See if we have a thread_db header file that has TD_NOTALLOC.
+dnl See if we have a thread_db header file that has TD_NOTALLOC and
+dnl other error codes.
if test "x$ac_cv_header_thread_db_h" = "xyes"; then
AC_CACHE_CHECK([whether <thread_db.h> has TD_NOTALLOC],
gdb_cv_thread_db_h_has_td_notalloc,
gdb_cv_thread_db_h_has_td_notalloc=no
)
)
+ AC_CACHE_CHECK([whether <thread_db.h> has TD_VERSION],
+ gdb_cv_thread_db_h_has_td_version,
+ AC_TRY_COMPILE(
+ [#include <thread_db.h>],
+ [int i = TD_VERSION;],
+ gdb_cv_thread_db_h_has_td_version=yes,
+ gdb_cv_thread_db_h_has_td_version=no
+ )
+ )
+ AC_CACHE_CHECK([whether <thread_db.h> has TD_NOTLS],
+ gdb_cv_thread_db_h_has_td_notls,
+ AC_TRY_COMPILE(
+ [#include <thread_db.h>],
+ [int i = TD_NOTLS;],
+ gdb_cv_thread_db_h_has_td_notls=yes,
+ gdb_cv_thread_db_h_has_td_notls=no
+ )
+ )
fi
if test "x$gdb_cv_thread_db_h_has_td_notalloc" = "xyes"; then
AC_DEFINE(THREAD_DB_HAS_TD_NOTALLOC, 1,
[Define if <thread_db.h> has the TD_NOTALLOC error code.])
fi
+if test "x$gdb_cv_thread_db_h_has_td_version" = "xyes"; then
+ AC_DEFINE(THREAD_DB_HAS_TD_VERSION, 1,
+ [Define if <thread_db.h> has the TD_VERSION error code.])
+fi
+if test "x$gdb_cv_thread_db_h_has_td_notls" = "xyes"; then
+ AC_DEFINE(THREAD_DB_HAS_TD_NOTLS, 1,
+ [Define if <thread_db.h> has the TD_NOTLS error code.])
+fi
dnl See if we have a sys/syscall header file that has __NR_tkill.
if test "x$ac_cv_header_sys_syscall_h" = "xyes"; then
fi
dnl See if we can issue tkill syscall.
if test "x$gdb_cv_sys_syscall_h_has_tkill" = "xyes" && test "x$ac_cv_func_syscall" = "xyes"; then
- AC_DEFINE(HAVE_TKILL_SYSCALL, 1,
- [Define if we can use the tkill syscall.])
+ AC_DEFINE(HAVE_TKILL_SYSCALL, 1, [Define if you support the tkill syscall.])
fi
dnl Handle optional features that can be enabled.
TARGET_SYSTEM_ROOT_DEFINE='-DTARGET_SYSTEM_ROOT=\"$(TARGET_SYSTEM_ROOT)\"'
- if test "x$exec_prefix" = xNONE; then
- if test "x$prefix" = xNONE; then
- test_prefix=/usr/local
- else
- test_prefix=$prefix
- fi
+ if test "x$prefix" = xNONE; then
+ test_prefix=/usr/local
else
- test_prefix=$exec_prefix
+ test_prefix=$prefix
+ fi
+ if test "x$exec_prefix" = xNONE || test "x$exec_prefix" = 'x${prefix}'; then
+ test_exec_prefix=$test_prefix
+ else
+ test_exec_prefix=$exec_prefix
fi
case ${TARGET_SYSTEM_ROOT} in
"${test_prefix}"|"${test_prefix}/"*|\
+ "${test_exec_prefix}"|"${test_exec_prefix}/"*|\
+ '${prefix}'|'${prefix}/'*|\
'${exec_prefix}'|'${exec_prefix}/'*)
t="$TARGET_SYSTEM_ROOT_DEFINE -DTARGET_SYSTEM_ROOT_RELOCATABLE"
TARGET_SYSTEM_ROOT_DEFINE="$t"
AC_SUBST(TARGET_SYSTEM_ROOT)
AC_SUBST(TARGET_SYSTEM_ROOT_DEFINE)
-# NOTE: Don't add -Wall or -Wunused, they both include
-# -Wunused-parameter which reports bogus warnings.
-# NOTE: If you add to this list, remember to update
-# gdb/doc/gdbint.texinfo.
-build_warnings="-Wimplicit -Wreturn-type -Wcomment -Wtrigraphs \
--Wformat -Wparentheses -Wpointer-arith -Wformat-nonliteral \
--Wunused-label -Wunused-function"
-
-# GCC supports -Wuninitialized only with -O or -On, n != 0.
-if test x${CFLAGS+set} = xset; then
- case "${CFLAGS}" in
- *"-O0"* ) ;;
- *"-O"* )
- build_warnings="${build_warnings} -Wuninitialized"
- ;;
- esac
-else
- build_warnings="${build_warnings} -Wuninitialized"
+AC_ARG_ENABLE(werror,
+ [ --enable-werror treat compile warnings as errors],
+ [case "${enableval}" in
+ yes | y) ERROR_ON_WARNING="yes" ;;
+ no | n) ERROR_ON_WARNING="no" ;;
+ *) AC_MSG_ERROR(bad value ${enableval} for --enable-werror) ;;
+ esac])
+
+# Enable -Werror by default when using gcc
+if test "${GCC}" = yes -a -z "${ERROR_ON_WARNING}" ; then
+ ERROR_ON_WARNING=yes
+fi
+
+WERROR_CFLAGS=""
+if test "${ERROR_ON_WARNING}" = yes ; then
+ WERROR_CFLAGS="-Werror"
fi
-# Up for debate: -Wswitch -Wcomment -trigraphs -Wtrigraphs
-# -Wunused-function -Wunused-variable -Wunused-value
-# -Wchar-subscripts -Wtraditional -Wshadow -Wcast-qual
-# -Wcast-align -Wwrite-strings -Wconversion -Wstrict-prototypes
-# -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls
-# -Woverloaded-virtual -Winline -Werror"
+# The entries after -Wno-pointer-sign are disabled warnings which may
+# be enabled in the future, which can not currently be used to build
+# GDB.
+# NOTE: If you change this list, remember to update
+# gdb/doc/gdbint.texinfo.
+build_warnings="-Wall -Wdeclaration-after-statement -Wpointer-arith \
+-Wformat-nonliteral -Wno-pointer-sign \
+-Wno-unused -Wno-switch -Wno-char-subscripts"
+
AC_ARG_ENABLE(build-warnings,
[ --enable-build-warnings Enable build-time compiler warnings if gcc is used],
[case "${enableval}" in
echo "Setting GDB specific compiler warning flags = $build_warnings" 6>&1
fi])dnl
WARN_CFLAGS=""
-WERROR_CFLAGS=""
if test "x${build_warnings}" != x -a "x$GCC" = xyes
then
AC_MSG_CHECKING(compiler warning flags)
CFLAGS="$saved_CFLAGS"
esac
done
- AC_MSG_RESULT(${WARN_CFLAGS}${WERROR_CFLAGS})
+ AC_MSG_RESULT(${WARN_CFLAGS} ${WERROR_CFLAGS})
fi
AC_SUBST(WARN_CFLAGS)
AC_SUBST(WERROR_CFLAGS)
case ${host} in
*go32* ) SER_HARDWIRE=ser-go32.o ;;
*djgpp* ) SER_HARDWIRE=ser-go32.o ;;
- *mingw32*) SER_HARDWIRE="ser-base.o ser-tcp.o" ;;
+ *mingw32*) SER_HARDWIRE="ser-base.o ser-tcp.o ser-mingw.o" ;;
esac
AC_SUBST(SER_HARDWIRE)
esac
AC_SUBST(WIN32LIBS)
+# Add ELF support to GDB, but only if BFD includes ELF support.
+OLD_CFLAGS=$CFLAGS
+OLD_LDFLAGS=$LDFLAGS
+OLD_LIBS=$LIBS
+CFLAGS="$CFLAGS -I${srcdir}/../include -I../bfd -I${srcdir}/../bfd"
+LDFLAGS="$LDFLAGS -L../bfd -L../libiberty"
+intl=`echo $LIBINTL | sed 's,${top_builddir}/,,g'`
+LIBS="$LIBS -lbfd -liberty $intl"
+AC_CACHE_CHECK([for ELF support in BFD], gdb_cv_var_elf,
+[AC_TRY_LINK(
+[#include <stdlib.h>
+#include "bfd.h"
+#include "elf-bfd.h"
+],
+[bfd *abfd = NULL; bfd_get_elf_phdr_upper_bound (abfd); ],
+gdb_cv_var_elf=yes, gdb_cv_var_elf=no)])
+if test $gdb_cv_var_elf = yes; then
+ CONFIG_OBS="$CONFIG_OBS elfread.o"
+ AC_DEFINE(HAVE_ELF, 1,
+ [Define if ELF support should be included.])
+fi
+CFLAGS=$OLD_CFLAGS
+LDFLAGS=$OLD_LDFLAGS
+LIBS=$OLD_LIBS
+
+# Add any host-specific objects to GDB.
+CONFIG_OBS="${CONFIG_OBS} ${gdb_host_obs}"
+
LIBGUI="../libgui/src/libgui.a"
GUI_CFLAGS_X="-I${srcdir}/../libgui/src"
AC_SUBST(LIBGUI)
fi
# Unlike the sim directory, whether a simulator is linked is controlled by
-# presence of a SIM= and a SIM_OBS= definition in the target '.mt' file.
+# presence of a gdb_sim definition in the target configure.tgt entry.
# This code just checks for a few cases where we'd like to ignore those
# definitions, even when they're present in the '.mt' file. These cases
# are when --disable-sim is specified, or if the simulator directory is
ignore_sim=true
fi
-if test "${ignore_sim}" = "true"; then
- IGNORE_SIM="SIM="
- IGNORE_SIM_OBS="SIM_OBS="
-else
- IGNORE_SIM=""
- IGNORE_SIM_OBS=""
- AC_DEFINE(WITH_SIM)
+SIM=
+SIM_OBS=
+if test "${ignore_sim}" = "false"; then
+ if test x"${gdb_sim}" != x ; then
+ SIM="${gdb_sim}"
+ SIM_OBS="remote-sim.o"
+ AC_DEFINE(WITH_SIM, 1, [Define if the simulator is being linked in.])
+ fi
fi
-AC_SUBST(IGNORE_SIM)
-AC_SUBST(IGNORE_SIM_OBS)
+AC_SUBST(SIM)
+AC_SUBST(SIM_OBS)
AC_SUBST(ENABLE_CFLAGS)
AC_SUBST(PROFILE_CFLAGS)
AC_SUBST(target_subdir)
frags=
-if test "${target}" = "${host}"; then
+if test "${gdb_native}" = "yes"; then
host_makefile_frag=${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh
if test ! -f ${host_makefile_frag}; then
AC_MSG_ERROR("*** Gdb does not support native target ${host}")
host_makefile_frag=/dev/null
fi
-target_makefile_frag=${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt
-if test ! -f ${target_makefile_frag}; then
- AC_MSG_ERROR("*** Gdb does not support target ${target}")
-fi
-frags="$frags $target_makefile_frag"
-
AC_SUBST_FILE(host_makefile_frag)
-AC_SUBST_FILE(target_makefile_frag)
AC_SUBST(frags)
changequote(,)dnl
-hostfile=`sed -n '
-s/XM_FILE[ ]*=[ ]*\([^ ]*\)/\1/p
-' ${host_makefile_frag}`
-
-targetfile=`sed -n '
-s/DEPRECATED_TM_FILE[ ]*=[ ]*\([^ ]*\)/\1/p
-' ${target_makefile_frag}`
-
-if test "${target}" = "${host}"; then
+if test "${gdb_native}" = "yes"; then
# We pick this up from the host configuration file (.mh) because we
# do not have a native configuration Makefile fragment.
nativefile=`sed -n '
AC_CONFIG_SUBDIRS(multi-ice)
fi
-# We only build gdbserver automatically if host and target are the same.
-if test "x$target" = "x$host"; then
+# We only build gdbserver automatically in a native configuration.
+if test "$gdb_native" = "yes"; then
AC_MSG_CHECKING(whether gdbserver is supported on this host)
if test "x$build_gdbserver" = xyes; then
AC_MSG_RESULT(yes)
fi
fi
-# We build rdi-share on ARM-based targets, as instructed by configure.tgt.
-if test "x$build_rdi_share" = xyes; then
- AC_CONFIG_SUBDIRS(rdi-share)
-fi
-
-# We configure the nlm subdirectory on netware targets, as instructed
-# by configure.tgt.
-if test "x$build_nlm" = xyes; then
- AC_CONFIG_SUBDIRS(nlm)
-fi
-
-# If hostfile (XM_FILE) and/or targetfile (DEPRECATED_TM_FILE) and/or
-# nativefile (NAT_FILE) is not set in config/*/*.m[ht] files, we link
+# If nativefile (NAT_FILE) is not set in config/*/*.m[ht] files, we link
# to an empty version.
files=
links=
-rm -f xm.h
-xm_h=""
-if test "${hostfile}" != ""; then
- xm_h=xm.h
- case "${hostfile}" in
- xm-*.h ) GDB_XM_FILE="config/${gdb_host_cpu}/${hostfile}" ;;
- * ) GDB_XM_FILE="${hostfile}"
- esac
- files="${files} ${GDB_XM_FILE}"
- links="${links} xm.h"
- AC_DEFINE_UNQUOTED(GDB_XM_FILE, "${GDB_XM_FILE}")
-fi
-AC_SUBST(xm_h)
-
-rm -f tm.h
-tm_h=""
-if test "${targetfile}" != ""; then
- tm_h=tm.h
- case "${targetfile}" in
- tm-*.h ) GDB_TM_FILE="config/${gdb_target_cpu}/${targetfile}" ;;
- * ) GDB_TM_FILE="${targetfile}"
- esac
- files="${files} ${GDB_TM_FILE}"
- links="${links} tm.h"
- AC_DEFINE_UNQUOTED(GDB_TM_FILE, "${GDB_TM_FILE}")
-fi
-AC_SUBST(tm_h)
-
rm -f nm.h
nm_h=""
if test "${nativefile}" != ""; then
esac
files="${files} ${GDB_NM_FILE}"
links="${links} nm.h"
- AC_DEFINE_UNQUOTED(GDB_NM_FILE, "${GDB_NM_FILE}")
+ AC_DEFINE_UNQUOTED(GDB_NM_FILE, "${GDB_NM_FILE}", [nativefile])
fi
AC_SUBST(nm_h)
dnl
changequote(,)dnl
-sed -e '/^DEPRECATED_TM_FILE[ ]*=/s,^DEPRECATED_TM_FILE[ ]*=[ ]*,&config/'"${gdb_target_cpu}"'/,
-/^XM_FILE[ ]*=/s,^XM_FILE[ ]*=[ ]*,&config/'"${gdb_host_cpu}"'/,
-/^NAT_FILE[ ]*=/s,^NAT_FILE[ ]*=[ ]*,&config/'"${gdb_host_cpu}"'/,' <Makefile >Makefile.tmp
+sed -e '/^NAT_FILE[ ]*=/s,^NAT_FILE[ ]*=[ ]*,&config/'"${gdb_host_cpu}"'/,' <Makefile >Makefile.tmp
mv -f Makefile.tmp Makefile
changequote([,])dnl
],
[
gdb_host_cpu=$gdb_host_cpu
-gdb_target_cpu=$gdb_target_cpu
nativefile=$nativefile
])
projects / deliverable / binutils-gdb.git / blobdiff