/* *INDENT-OFF* */ /* ATTR_FORMAT confuses indent, avoid running it for now */
/* Basic, host-specific, and target-specific definitions for GDB.
Copyright 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
- 1997, 1998, 1999, 2000, 2001
+ 1997, 1998, 1999, 2000, 2001, 2002
Free Software Foundation, Inc.
This file is part of GDB.
#include <unistd.h>
#endif
+/* For ``enum target_signal''. */
+#include "gdb/signals.h"
+
/* Just in case they're not defined in stdio.h. */
#ifndef SEEK_SET
#include "progress.h"
-#ifdef USE_MMALLOC
-#include "mmalloc.h"
-#endif
-
/* For BFD64 and bfd_vma. */
#include "bfd.h"
/* use tui interface if non-zero */
extern int tui_version;
-#if defined(TUI)
-/* all invocations of TUIDO should have two sets of parens */
-#define TUIDO(x) tuiDo x
-#else
-#define TUIDO(x)
-#endif
-
/* enable xdb commands if set */
extern int xdb_commands;
unspecified_precision
};
-/* The numbering of these signals is chosen to match traditional unix
- signals (insofar as various unices use the same numbers, anyway).
- It is also the numbering of the GDB remote protocol. Other remote
- protocols, if they use a different numbering, should make sure to
- translate appropriately.
-
- Since these numbers have actually made it out into other software
- (stubs, etc.), you mustn't disturb the assigned numbering. If you
- need to add new signals here, add them to the end of the explicitly
- numbered signals.
-
- This is based strongly on Unix/POSIX signals for several reasons:
- (1) This set of signals represents a widely-accepted attempt to
- represent events of this sort in a portable fashion, (2) we want a
- signal to make it from wait to child_wait to the user intact, (3) many
- remote protocols use a similar encoding. However, it is
- recognized that this set of signals has limitations (such as not
- distinguishing between various kinds of SIGSEGV, or not
- distinguishing hitting a breakpoint from finishing a single step).
- So in the future we may get around this either by adding additional
- signals for breakpoint, single-step, etc., or by adding signal
- codes; the latter seems more in the spirit of what BSD, System V,
- etc. are doing to address these issues. */
-
-/* For an explanation of what each signal means, see
- target_signal_to_string. */
-
-enum target_signal
- {
- /* Used some places (e.g. stop_signal) to record the concept that
- there is no signal. */
- TARGET_SIGNAL_0 = 0,
- TARGET_SIGNAL_FIRST = 0,
- TARGET_SIGNAL_HUP = 1,
- TARGET_SIGNAL_INT = 2,
- TARGET_SIGNAL_QUIT = 3,
- TARGET_SIGNAL_ILL = 4,
- TARGET_SIGNAL_TRAP = 5,
- TARGET_SIGNAL_ABRT = 6,
- TARGET_SIGNAL_EMT = 7,
- TARGET_SIGNAL_FPE = 8,
- TARGET_SIGNAL_KILL = 9,
- TARGET_SIGNAL_BUS = 10,
- TARGET_SIGNAL_SEGV = 11,
- TARGET_SIGNAL_SYS = 12,
- TARGET_SIGNAL_PIPE = 13,
- TARGET_SIGNAL_ALRM = 14,
- TARGET_SIGNAL_TERM = 15,
- TARGET_SIGNAL_URG = 16,
- TARGET_SIGNAL_STOP = 17,
- TARGET_SIGNAL_TSTP = 18,
- TARGET_SIGNAL_CONT = 19,
- TARGET_SIGNAL_CHLD = 20,
- TARGET_SIGNAL_TTIN = 21,
- TARGET_SIGNAL_TTOU = 22,
- TARGET_SIGNAL_IO = 23,
- TARGET_SIGNAL_XCPU = 24,
- TARGET_SIGNAL_XFSZ = 25,
- TARGET_SIGNAL_VTALRM = 26,
- TARGET_SIGNAL_PROF = 27,
- TARGET_SIGNAL_WINCH = 28,
- TARGET_SIGNAL_LOST = 29,
- TARGET_SIGNAL_USR1 = 30,
- TARGET_SIGNAL_USR2 = 31,
- TARGET_SIGNAL_PWR = 32,
- /* Similar to SIGIO. Perhaps they should have the same number. */
- TARGET_SIGNAL_POLL = 33,
- TARGET_SIGNAL_WIND = 34,
- TARGET_SIGNAL_PHONE = 35,
- TARGET_SIGNAL_WAITING = 36,
- TARGET_SIGNAL_LWP = 37,
- TARGET_SIGNAL_DANGER = 38,
- TARGET_SIGNAL_GRANT = 39,
- TARGET_SIGNAL_RETRACT = 40,
- TARGET_SIGNAL_MSG = 41,
- TARGET_SIGNAL_SOUND = 42,
- TARGET_SIGNAL_SAK = 43,
- TARGET_SIGNAL_PRIO = 44,
- TARGET_SIGNAL_REALTIME_33 = 45,
- TARGET_SIGNAL_REALTIME_34 = 46,
- TARGET_SIGNAL_REALTIME_35 = 47,
- TARGET_SIGNAL_REALTIME_36 = 48,
- TARGET_SIGNAL_REALTIME_37 = 49,
- TARGET_SIGNAL_REALTIME_38 = 50,
- TARGET_SIGNAL_REALTIME_39 = 51,
- TARGET_SIGNAL_REALTIME_40 = 52,
- TARGET_SIGNAL_REALTIME_41 = 53,
- TARGET_SIGNAL_REALTIME_42 = 54,
- TARGET_SIGNAL_REALTIME_43 = 55,
- TARGET_SIGNAL_REALTIME_44 = 56,
- TARGET_SIGNAL_REALTIME_45 = 57,
- TARGET_SIGNAL_REALTIME_46 = 58,
- TARGET_SIGNAL_REALTIME_47 = 59,
- TARGET_SIGNAL_REALTIME_48 = 60,
- TARGET_SIGNAL_REALTIME_49 = 61,
- TARGET_SIGNAL_REALTIME_50 = 62,
- TARGET_SIGNAL_REALTIME_51 = 63,
- TARGET_SIGNAL_REALTIME_52 = 64,
- TARGET_SIGNAL_REALTIME_53 = 65,
- TARGET_SIGNAL_REALTIME_54 = 66,
- TARGET_SIGNAL_REALTIME_55 = 67,
- TARGET_SIGNAL_REALTIME_56 = 68,
- TARGET_SIGNAL_REALTIME_57 = 69,
- TARGET_SIGNAL_REALTIME_58 = 70,
- TARGET_SIGNAL_REALTIME_59 = 71,
- TARGET_SIGNAL_REALTIME_60 = 72,
- TARGET_SIGNAL_REALTIME_61 = 73,
- TARGET_SIGNAL_REALTIME_62 = 74,
- TARGET_SIGNAL_REALTIME_63 = 75,
-
- /* Used internally by Solaris threads. See signal(5) on Solaris. */
- TARGET_SIGNAL_CANCEL = 76,
-
- /* Yes, this pains me, too. But LynxOS didn't have SIG32, and now
- Linux does, and we can't disturb the numbering, since it's part
- of the remote protocol. Note that in some GDB's
- TARGET_SIGNAL_REALTIME_32 is number 76. */
- TARGET_SIGNAL_REALTIME_32,
- /* Yet another pain, IRIX 6 has SIG64. */
- TARGET_SIGNAL_REALTIME_64,
- /* Yet another pain, Linux/MIPS might go up to 128. */
- TARGET_SIGNAL_REALTIME_65,
- TARGET_SIGNAL_REALTIME_66,
- TARGET_SIGNAL_REALTIME_67,
- TARGET_SIGNAL_REALTIME_68,
- TARGET_SIGNAL_REALTIME_69,
- TARGET_SIGNAL_REALTIME_70,
- TARGET_SIGNAL_REALTIME_71,
- TARGET_SIGNAL_REALTIME_72,
- TARGET_SIGNAL_REALTIME_73,
- TARGET_SIGNAL_REALTIME_74,
- TARGET_SIGNAL_REALTIME_75,
- TARGET_SIGNAL_REALTIME_76,
- TARGET_SIGNAL_REALTIME_77,
- TARGET_SIGNAL_REALTIME_78,
- TARGET_SIGNAL_REALTIME_79,
- TARGET_SIGNAL_REALTIME_80,
- TARGET_SIGNAL_REALTIME_81,
- TARGET_SIGNAL_REALTIME_82,
- TARGET_SIGNAL_REALTIME_83,
- TARGET_SIGNAL_REALTIME_84,
- TARGET_SIGNAL_REALTIME_85,
- TARGET_SIGNAL_REALTIME_86,
- TARGET_SIGNAL_REALTIME_87,
- TARGET_SIGNAL_REALTIME_88,
- TARGET_SIGNAL_REALTIME_89,
- TARGET_SIGNAL_REALTIME_90,
- TARGET_SIGNAL_REALTIME_91,
- TARGET_SIGNAL_REALTIME_92,
- TARGET_SIGNAL_REALTIME_93,
- TARGET_SIGNAL_REALTIME_94,
- TARGET_SIGNAL_REALTIME_95,
- TARGET_SIGNAL_REALTIME_96,
- TARGET_SIGNAL_REALTIME_97,
- TARGET_SIGNAL_REALTIME_98,
- TARGET_SIGNAL_REALTIME_99,
- TARGET_SIGNAL_REALTIME_100,
- TARGET_SIGNAL_REALTIME_101,
- TARGET_SIGNAL_REALTIME_102,
- TARGET_SIGNAL_REALTIME_103,
- TARGET_SIGNAL_REALTIME_104,
- TARGET_SIGNAL_REALTIME_105,
- TARGET_SIGNAL_REALTIME_106,
- TARGET_SIGNAL_REALTIME_107,
- TARGET_SIGNAL_REALTIME_108,
- TARGET_SIGNAL_REALTIME_109,
- TARGET_SIGNAL_REALTIME_110,
- TARGET_SIGNAL_REALTIME_111,
- TARGET_SIGNAL_REALTIME_112,
- TARGET_SIGNAL_REALTIME_113,
- TARGET_SIGNAL_REALTIME_114,
- TARGET_SIGNAL_REALTIME_115,
- TARGET_SIGNAL_REALTIME_116,
- TARGET_SIGNAL_REALTIME_117,
- TARGET_SIGNAL_REALTIME_118,
- TARGET_SIGNAL_REALTIME_119,
- TARGET_SIGNAL_REALTIME_120,
- TARGET_SIGNAL_REALTIME_121,
- TARGET_SIGNAL_REALTIME_122,
- TARGET_SIGNAL_REALTIME_123,
- TARGET_SIGNAL_REALTIME_124,
- TARGET_SIGNAL_REALTIME_125,
- TARGET_SIGNAL_REALTIME_126,
- TARGET_SIGNAL_REALTIME_127,
-
-#if defined(MACH) || defined(__MACH__)
- /* Mach exceptions */
- TARGET_EXC_BAD_ACCESS,
- TARGET_EXC_BAD_INSTRUCTION,
- TARGET_EXC_ARITHMETIC,
- TARGET_EXC_EMULATION,
- TARGET_EXC_SOFTWARE,
- TARGET_EXC_BREAKPOINT,
-#endif
- TARGET_SIGNAL_INFO,
-
- /* Some signal we don't know about. */
- TARGET_SIGNAL_UNKNOWN,
-
- /* Use whatever signal we use when one is not specifically specified
- (for passing to proceed and so on). */
- TARGET_SIGNAL_DEFAULT,
-
- /* Last and unused enum value, for sizing arrays, etc. */
- TARGET_SIGNAL_LAST
- };
-
/* the cleanup list records things that have to be undone
if an error happens (descriptors to be closed, memory to be freed, etc.)
Each link in the chain records a function to call and an
extern int myread (int, char *, int);
-extern int query (char *, ...) ATTR_FORMAT (printf, 1, 2);
+extern int query (const char *, ...) ATTR_FORMAT (printf, 1, 2);
extern void init_page_info (void);
extern CORE_ADDR host_pointer_to_address (void *ptr);
extern void *address_to_host_pointer (CORE_ADDR addr);
+extern char *gdb_realpath (const char *);
+extern char *xfullpath (const char *);
+
/* From demangle.c */
extern void set_demangling_style (char *);
typedef int (use_struct_convention_fn) (int gcc_p, struct type * value_type);
extern use_struct_convention_fn generic_use_struct_convention;
-typedef unsigned char *(breakpoint_from_pc_fn) (CORE_ADDR * pcptr, int *lenptr);
\f
/* Annotation stuff. */
#if defined(TUI)
#include "tui.h"
-#include "tuiCommand.h"
-#include "tuiData.h"
-#include "tuiIO.h"
-#include "tuiLayout.h"
-#include "tuiWin.h"
#endif
#include "ui-file.h"
extern char *phex (ULONGEST l, int sizeof_l);
extern char *phex_nz (ULONGEST l, int sizeof_l);
+/* Like paddr() only print/scan raw CORE_ADDR. The output from
+ core_addr_to_string() can be passed direct to
+ string_to_core_addr(). */
+extern const char *core_addr_to_string (const CORE_ADDR addr);
+extern const char *core_addr_to_string_nz (const CORE_ADDR addr);
+extern CORE_ADDR string_to_core_addr (const char *my_string);
+
extern void fprintf_symbol_filtered (struct ui_file *, char *,
enum language, int);
-extern NORETURN void perror_with_name (char *) ATTR_NORETURN;
+extern NORETURN void perror_with_name (const char *) ATTR_NORETURN;
-extern void print_sys_errmsg (char *, int);
+extern void print_sys_errmsg (const char *, int);
/* From regex.c or libc. BSD 4.4 declares this with the argument type as
"const char *" in unistd.h, so we can't declare the argument
bfd_signed_vma data_off,
bfd_signed_vma bss_off);
-/* From findvar.c */
-
-extern int read_relative_register_raw_bytes (int, char *);
+/* Take over the 'find_mapped_memory' vector from exec.c. */
+extern void exec_set_find_memory_regions (int (*) (int (*) (CORE_ADDR,
+ unsigned long,
+ int, int, int,
+ void *),
+ void *));
/* Possible lvalue types. Like enum language, this should be in
value.h, but needs to be here for the same reason. */
#include "fopen-same.h"
#endif
-#define CONST_PTR const
-
/* Defaults for system-wide constants (if not defined by xm.h, we fake it).
FIXME: Assumes 2's complement arithmetic */
extern char *mstrsave (void *, const char *);
-#if !defined (USE_MMALLOC)
-/* NOTE: cagney/2000-03-04: The mmalloc functions need to use PTR
- rather than void* so that they are consistent with the delcaration
- in ../mmalloc/mmalloc.h. */
-extern PTR mcalloc (PTR, size_t, size_t);
-extern PTR mmalloc (PTR, size_t);
-extern PTR mrealloc (PTR, PTR, size_t);
-extern void mfree (PTR, PTR);
-#endif
-
/* Robust versions of same. Throw an internal error when no memory,
guard against stray NULL arguments. */
extern void *xmmalloc (void *md, size_t size);
"libiberty.h". */
extern void xfree (void *);
+/* Utility macro to allocate typed memory. Avoids errors like
+ ``struct foo *foo = xmalloc (sizeof bar)'' and ``struct foo *foo =
+ (struct foo *) xmalloc (sizeof bar)''. */
+#define XMALLOC(TYPE) ((TYPE*) xmalloc (sizeof (TYPE)))
+
/* Like asprintf/vasprintf but get an internal_error if the call
fails. */
extern void xasprintf (char **ret, const char *format, ...) ATTR_FORMAT (printf, 2, 3);
extern NORETURN void verror (const char *fmt, va_list ap) ATTR_NORETURN;
-extern NORETURN void error (const char *fmt, ...) ATTR_NORETURN;
-
-/* DEPRECATED: Use error(), verror() or error_stream(). */
-extern NORETURN void error_begin (void);
+extern NORETURN void error (const char *fmt, ...) ATTR_NORETURN ATTR_FORMAT (printf, 1, 2);
extern NORETURN void error_stream (struct ui_file *) ATTR_NORETURN;
extern NORETURN void nomem (long) ATTR_NORETURN;
-/* Reasons for calling return_to_top_level. Note: enum value 0 is
- reserved for internal use as the return value from an initial
- setjmp(). */
+/* Reasons for calling throw_exception(). NOTE: all reason values
+ must be less than zero. enum value 0 is reserved for internal use
+ as the return value from an initial setjmp(). The function
+ catch_exceptions() reserves values >= 0 as legal results from its
+ wrapped function. */
enum return_reason
{
/* User interrupt. */
- RETURN_QUIT = 1,
+ RETURN_QUIT = -2,
/* Any other error. */
RETURN_ERROR
};
#define ALL_CLEANUPS ((struct cleanup *)0)
-#define RETURN_MASK(reason) (1 << (int)(reason))
+#define RETURN_MASK(reason) (1 << (int)(-reason))
#define RETURN_MASK_QUIT RETURN_MASK (RETURN_QUIT)
#define RETURN_MASK_ERROR RETURN_MASK (RETURN_ERROR)
#define RETURN_MASK_ALL (RETURN_MASK_QUIT | RETURN_MASK_ERROR)
typedef int return_mask;
-extern NORETURN void return_to_top_level (enum return_reason) ATTR_NORETURN;
+/* Throw an exception of type RETURN_REASON. Will execute a LONG JUMP
+ to the inner most containing exception handler established using
+ catch_exceptions() (or the legacy catch_errors()).
+
+ Code normally throws an exception using error() et.al. For various
+ reaons, GDB also contains code that throws an exception directly.
+ For instance, the remote*.c targets contain CNTRL-C signal handlers
+ that propogate the QUIT event up the exception chain. ``This could
+ be a good thing or a dangerous thing.'' -- the Existential Wombat. */
+
+extern NORETURN void throw_exception (enum return_reason) ATTR_NORETURN;
+
+/* Call FUNC(UIOUT, FUNC_ARGS) but wrapped within an exception
+ handler. If an exception (enum return_reason) is thrown using
+ throw_exception() than all cleanups installed since
+ catch_exceptions() was entered are invoked, the (-ve) exception
+ value is then returned by catch_exceptions. If FUNC() returns
+ normally (with a postive or zero return value) then that value is
+ returned by catch_exceptions(). It is an internal_error() for
+ FUNC() to return a negative value.
+
+ For the period of the FUNC() call: UIOUT is installed as the output
+ builder; ERRSTRING is installed as the error/quit message; and a
+ new cleanup_chain is established. The old values are restored
+ before catch_exceptions() returns.
+
+ FIXME; cagney/2001-08-13: The need to override the global UIOUT
+ builder variable should just go away.
+
+ This function superseeds catch_errors().
+
+ This function uses SETJMP() and LONGJUMP(). */
+
+struct ui_out;
+typedef int (catch_exceptions_ftype) (struct ui_out *ui_out, void *args);
+extern int catch_exceptions (struct ui_out *uiout,
+ catch_exceptions_ftype *func, void *func_args,
+ char *errstring, return_mask mask);
/* If CATCH_ERRORS_FTYPE throws an error, catch_errors() returns zero
otherwize the result from CATCH_ERRORS_FTYPE is returned. It is
probably useful for CATCH_ERRORS_FTYPE to always return a non-zero
value. It's unfortunate that, catch_errors() does not return an
indication of the exact exception that it caught - quit_flag might
- help. */
+ help.
+
+ This function is superseeded by catch_exceptions(). */
typedef int (catch_errors_ftype) (PTR);
-extern int catch_errors (catch_errors_ftype *, PTR, char *, return_mask);
+extern int catch_errors (catch_errors_ftype *, void *, char *, return_mask);
/* Template to catch_errors() that wraps calls to command
functions. */
typedef void (catch_command_errors_ftype) (char *, int);
extern int catch_command_errors (catch_command_errors_ftype *func, char *command, int from_tty, return_mask);
-extern void warning_begin (void);
-
extern void warning (const char *, ...) ATTR_FORMAT (printf, 1, 2);
+extern void vwarning (const char *, va_list args);
+
/* Global functions from other, non-gdb GNU thingies.
Libiberty thingies are no longer declared here. We include libiberty.h
above, instead. */
#endif /* Not GNU C */
#endif /* alloca not defined */
-/* HOST_BYTE_ORDER must be defined to one of these. */
-
-#ifdef HAVE_ENDIAN_H
-#include <endian.h>
-#endif
-
-#if !defined (BIG_ENDIAN)
-#define BIG_ENDIAN 4321
-#endif
-
-#if !defined (LITTLE_ENDIAN)
-#define LITTLE_ENDIAN 1234
-#endif
-
/* Dynamic target-system-dependent parameters for GDB. */
#include "gdbarch.h"
#if (GDB_MULTI_ARCH == 0)
from byte/word byte order. */
#if !defined (BITS_BIG_ENDIAN)
-#define BITS_BIG_ENDIAN (TARGET_BYTE_ORDER == BIG_ENDIAN)
+#define BITS_BIG_ENDIAN (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
#endif
/* In findvar.c. */
extern void store_typed_address (void *buf, struct type *type, CORE_ADDR addr);
-/* Setup definitions for host and target floating point formats. We need to
- consider the format for `float', `double', and `long double' for both target
- and host. We need to do this so that we know what kind of conversions need
- to be done when converting target numbers to and from the hosts DOUBLEST
- data type. */
-
-/* This is used to indicate that we don't know the format of the floating point
- number. Typically, this is useful for native ports, where the actual format
- is irrelevant, since no conversions will be taking place. */
-
-extern const struct floatformat floatformat_unknown;
-
-#if HOST_BYTE_ORDER == BIG_ENDIAN
-#ifndef HOST_FLOAT_FORMAT
-#define HOST_FLOAT_FORMAT &floatformat_ieee_single_big
-#endif
-#ifndef HOST_DOUBLE_FORMAT
-#define HOST_DOUBLE_FORMAT &floatformat_ieee_double_big
-#endif
-#else /* LITTLE_ENDIAN */
-#ifndef HOST_FLOAT_FORMAT
-#define HOST_FLOAT_FORMAT &floatformat_ieee_single_little
-#endif
-#ifndef HOST_DOUBLE_FORMAT
-#define HOST_DOUBLE_FORMAT &floatformat_ieee_double_little
-#endif
-#endif
-
-#ifndef HOST_LONG_DOUBLE_FORMAT
-#define HOST_LONG_DOUBLE_FORMAT &floatformat_unknown
-#endif
-
-/* Use `long double' if the host compiler supports it. (Note that this is not
- necessarily any longer than `double'. On SunOS/gcc, it's the same as
- double.) This is necessary because GDB internally converts all floating
- point values to the widest type supported by the host.
-
- There are problems however, when the target `long double' is longer than the
- host's `long double'. In general, we'll probably reduce the precision of
- any such values and print a warning. */
-
-#ifdef HAVE_LONG_DOUBLE
-typedef long double DOUBLEST;
-#else
-typedef double DOUBLEST;
-#endif
-
-extern void floatformat_to_doublest (const struct floatformat *,
- char *, DOUBLEST *);
-extern void floatformat_from_doublest (const struct floatformat *,
- DOUBLEST *, char *);
-
-extern int floatformat_is_negative (const struct floatformat *, char *);
-extern int floatformat_is_nan (const struct floatformat *, char *);
-extern char *floatformat_mantissa (const struct floatformat *, char *);
-
-extern DOUBLEST extract_floating (void *, int);
-extern void store_floating (void *, int, DOUBLEST);
\f
/* From valops.c */
/* Hooks for alternate command interfaces. */
-#ifdef UI_OUT
/* The name of the interpreter if specified on the command line. */
extern char *interpreter_p;
-#endif
/* If a given interpreter matches INTERPRETER_P then it should update
command_loop_hook and init_ui_hook with the per-interpreter
#endif
#ifndef SLASH_STRING
-#ifdef _WIN32
-#define SLASH_STRING "\\"
-#else
#define SLASH_STRING "/"
#endif
+
+#ifdef __MSDOS__
+# define CANT_FORK
+# define GLOBAL_CURDIR
#endif
/* Provide default definitions of PIDGET, TIDGET, and MERGEPID.
#define ISATTY(FP) (isatty (fileno (FP)))
#endif
-\f
-/* FIXME: cagney/1999-12-13: The following will be moved to gdb.h /
- libgdb.h or gdblib.h. */
-
-/* Return-code (RC) from a gdb library call. (The abreviation RC is
- taken from the sim/common directory.) */
-
-enum gdb_rc {
- /* The operation failed. The failure message can be fetched by
- calling ``char *error_last_message(void)''. The value is
- determined by the catch_errors() interface. */
- /* NOTE: Since ``defs.h:catch_errors()'' does not return an error /
- internal / quit indication it is not possible to return that
- here. */
- GDB_RC_FAIL = 0,
- /* No error occured but nothing happened. Due to the catch_errors()
- interface, this must be non-zero. */
- GDB_RC_NONE = 1,
- /* The operation was successful. Due to the catch_errors()
- interface, this must be non-zero. */
- GDB_RC_OK = 2
-};
-
-
-/* Print the specified breakpoint on GDB_STDOUT. (Eventually this
- function will ``print'' the object on ``output''). */
-enum gdb_rc gdb_breakpoint_query (/* struct {ui,gdb}_out *output, */ int bnum);
-
-/* Create a breakpoint at ADDRESS (a GDB source and line). */
-enum gdb_rc gdb_breakpoint (char *address, char *condition,
- int hardwareflag, int tempflag,
- int thread, int ignore_count);
-enum gdb_rc gdb_thread_select (/* output object */ char *tidstr);
-
-#ifdef UI_OUT
-/* Print a list of known thread ids. */
-enum gdb_rc gdb_list_thread_ids (/* output object */);
-
-/* Switch thread and print notification. */
-#endif
-
#endif /* #ifndef DEFS_H */
projects / deliverable / binutils-gdb.git / blobdiff