@value{GDBN}
* Operating System Information:: Getting additional information from
the operating system
+* Trace File Format:: GDB trace file format
* Copying:: GNU General Public License says
how you can copy and share GDB
* GNU Free Documentation License:: The license for this documentation
@itemx -x @var{file}
@cindex @code{--command}
@cindex @code{-x}
-Execute @value{GDBN} commands from file @var{file}. @xref{Command
-Files,, Command files}.
+Execute commands from file @var{file}. The contents of this file is
+evaluated exactly as the @code{source} command would.
+@xref{Command Files,, Command files}.
@item -eval-command @var{command}
@itemx -ex @var{command}
Like @code{nexti}, @code{reverse-nexti} executes a single instruction
in reverse, except that called functions are ``un-executed'' atomically.
That is, if the previously executed instruction was a return from
-another instruction, @code{reverse-nexti} will continue to execute
+another function, @code{reverse-nexti} will continue to execute
in reverse until the call to that function (from the current stack
frame) is reached.
packets used to implement tracepoints are described in @ref{Tracepoint
Packets}.
+It is also possible to get trace data from a file, in a manner reminiscent
+of corefiles; you specify the filename, and use @code{tfind} to search
+through the file. @xref{Trace Files}, for more details.
+
This chapter describes the tracepoint commands and features.
@menu
* Set Tracepoints::
* Analyze Collected Data::
* Tracepoint Variables::
+* Trace Files::
@end menu
@node Set Tracepoints
tracepoints cannot run @value{GDBN} commands when they are
hit. Tracepoints may not be thread-specific either.
+@cindex fast tracepoints
+Some targets may support @dfn{fast tracepoints}, which are inserted in
+a different way (such as with a jump instead of a trap), that is
+faster but possibly restricted in where they may be installed.
+
This section describes commands to set tracepoints and associated
conditions and actions.
@xref{Tracepoint Conditions, ,Tracepoint Conditions}, for more
information on tracepoint conditions.
+@item ftrace @var{location} [ if @var{cond} ]
+@cindex set fast tracepoint
+@kindex ftrace
+The @code{ftrace} command sets a fast tracepoint. For targets that
+support them, fast tracepoints will use a more efficient but possibly
+less general technique to trigger data collection, such as a jump
+instruction instead of a trap, or some sort of hardware support. It
+may not be possible to create a fast tracepoint at the desired
+location, in which case the command will exit with an explanatory
+message.
+
+@value{GDBN} handles arguments to @code{ftrace} exactly as for
+@code{trace}.
+
@vindex $tpnum
@cindex last tracepoint number
@cindex recent tracepoint number
(@value{GDBP}) @b{tstop}
@end smallexample
+@cindex disconnected tracing
+You can choose to continue running the trace experiment even if
+@value{GDBN} disconnects from the target, voluntarily or
+involuntarily. For commands such as @code{detach}, the debugger will
+ask what you want to do with the trace. But for unexpected
+terminations (@value{GDBN} crash, network outage), it would be
+unfortunate to lose hard-won trace data, so the variable
+@code{disconnected-tracing} lets you decide whether the trace should
+continue running without @value{GDBN}.
+
+@table @code
+@item set disconnected-tracing on
+@itemx set disconnected-tracing off
+@kindex set disconnected-tracing
+Choose whether a tracing run should continue to run if @value{GDBN}
+has disconnected from the target. Note that @code{detach} or
+@code{quit} will ask you directly what to do about a running trace no
+matter what this variable's setting, so the variable is mainly useful
+for handling unexpected situations, such as loss of the network.
+
+@item show disconnected-tracing
+@kindex show disconnected-tracing
+Show the current choice for disconnected tracing.
+
+@end table
+
+When you reconnect to the target, the trace experiment may or may not
+still be running; it might have filled the trace buffer in the
+meantime, or stopped for one of the other reasons. If it is running,
+it will continue after reconnection.
+
+Upon reconnection, the target will upload information about the
+tracepoints in effect. @value{GDBN} will then compare that
+information to the set of tracepoints currently defined, and attempt
+to match them up, allowing for the possibility that the numbers may
+have changed due to creation and deletion in the meantime. If one of
+the target's tracepoints does not match any in @value{GDBN}, the
+debugger will create a new tracepoint, so that you have a number with
+which to specify that tracepoint. This matching-up process is
+necessarily heuristic, and it may result in useless tracepoints being
+created; you may simply delete them if they are of no use.
@node Analyze Collected Data
@section Using the Collected Data
@item tfind outside @var{addr1}, @var{addr2}
Find the next snapshot whose PC is outside the given range of
-addresses.
+addresses (exclusive).
@item tfind range @var{addr1}, @var{addr2}
Find the next snapshot whose PC is between @var{addr1} and
-@var{addr2}. @c FIXME: Is the range inclusive or exclusive?
+@var{addr2} (inclusive).
@item tfind line @r{[}@var{file}:@r{]}@var{n}
Find the next snapshot associated with the source line @var{n}. If
> end
@end smallexample
+@node Trace Files
+@section Using Trace Files
+@cindex trace files
+
+In some situations, the target running a trace experiment may no
+longer be available; perhaps it crashed, or the hardware was needed
+for a different activity. To handle these cases, you can arrange to
+dump the trace data into a file, and later use that file as a source
+of trace data, via the @code{target tfile} command.
+
+@table @code
+
+@kindex tsave
+@item tsave [ -r ] @var{filename}
+Save the trace data to @var{filename}. By default, this command
+assumes that @var{filename} refers to the host filesystem, so if
+necessary @value{GDBN} will copy raw trace data up from the target and
+then save it. If the target supports it, you can also supply the
+optional argument @code{-r} (``remote'') to direct the target to save
+the data directly into @var{filename} in its own filesystem, which may be
+more efficient if the trace buffer is very large. (Note, however, that
+@code{target tfile} can only read from files accessible to the host.)
+
+@kindex target tfile
+@kindex tfile
+@item target tfile @var{filename}
+Use the file named @var{filename} as a source of trace data. Commands
+that examine data work as they do with a live target, but it is not
+possible to run any new trace experiments. @code{tstatus} will report
+the state of the trace run at the moment the data was saved, as well
+as the current trace frame you are examining. @var{filename} must be
+on a filesystem accessible to the host.
+
+@end table
+
@node Overlays
@chapter Debugging Programs That Use Overlays
@cindex overlays
@code{Standard} explicitly.
@end itemize
+Older versions of the compiler sometimes generate erroneous debugging
+information, resulting in the debugger incorrectly printing the value
+of affected entities. In some cases, the debugger is able to work
+around an issue automatically. In other cases, the debugger is able
+to work around the issue, but the work-around has to be specifically
+enabled.
+
+@kindex set ada trust-PAD-over-XVS
+@kindex show ada trust-PAD-over-XVS
+@table @code
+
+@item set ada trust-PAD-over-XVS on
+Configure GDB to strictly follow the GNAT encoding when computing the
+value of Ada entities, particularly when @code{PAD} and @code{PAD___XVS}
+types are involved (see @code{ada/exp_dbug.ads} in the GCC sources for
+a complete description of the encoding used by the GNAT compiler).
+This is the default.
+
+@item set ada trust-PAD-over-XVS off
+This is related to the encoding using by the GNAT compiler. If @value{GDBN}
+sometimes prints the wrong value for certain entities, changing @code{ada
+trust-PAD-over-XVS} to @code{off} activates a work-around which may fix
+the issue. It is always safe to set @code{ada trust-PAD-over-XVS} to
+@code{off}, but this incurs a slight performance penalty, so it is
+recommended to leave this setting to @code{on} unless necessary.
+
+@end table
+
@node Unsupported Languages
@section Unsupported Languages
@kindex readnow
@cindex reading symbols immediately
@cindex symbols, reading immediately
-@item symbol-file @var{filename} @r{[} -readnow @r{]}
-@itemx file @var{filename} @r{[} -readnow @r{]}
+@item symbol-file @r{[} -readnow @r{]} @var{filename}
+@itemx file @r{[} -readnow @r{]} @var{filename}
You can override the @value{GDBN} two-stage strategy for reading symbol
tables by using the @samp{-readnow} option with any of the commands that
load symbol table information, if you want to be sure @value{GDBN} has the
@tab @code{qXfer:siginfo:write}
@tab @code{set $_siginfo}
+@item @code{threads}
+@tab @code{qXfer:threads:read}
+@tab @code{info threads}
+
@item @code{get-thread-local-@*storage-address}
@tab @code{qGetTLSAddr}
@tab Displaying @code{__thread} variables
@item set new-console @var{mode}
If @var{mode} is @code{on} the debuggee will
be started in a new console on next start.
-If @var{mode} is @code{off}i, the debuggee will
+If @var{mode} is @code{off}, the debuggee will
be started in the same console as the debugger.
@kindex show new-console
@item show debug overload
Displays the current state of displaying @value{GDBN} C@t{++} overload
debugging info.
+@cindex expression parser, debugging info
+@cindex debug expression parser
+@item set debug parser
+Turns on or off the display of expression parser debugging output.
+Internally, this sets the @code{yydebug} variable in the expression
+parser. @xref{Tracing, , Tracing Your Parser, bison, Bison}, for
+details. The default is off.
+@item show debug parser
+Show the current state of expression parser debugging.
@cindex packets, reporting on stdout
@cindex serial connections, debugging
@cindex debug remote protocol
on composition of @value{GDBN} commands, and the second is based on the
Python scripting language.
+To facilitate the use of these extensions, @value{GDBN} is capable
+of evaluating the contents of a file. When doing so, @value{GDBN}
+can recognize which scripting language is being used by looking at
+the filename extension. Files with an unrecognized filename extension
+are always treated as a @value{GDBN} Command Files.
+@xref{Command Files,, Command files}.
+
+You can control how @value{GDBN} evaluates these files with the following
+setting:
+
+@table @code
+@kindex set script-extension
+@kindex show script-extension
+@item set script-extension off
+All scripts are always evaluated as @value{GDBN} Command Files.
+
+@item set script-extension soft
+The debugger determines the scripting language based on filename
+extension. If this scripting language is supported, @value{GDBN}
+evaluates the script using that language. Otherwise, it evaluates
+the file as a @value{GDBN} Command File.
+
+@item set script-extension strict
+The debugger determines the scripting language based on filename
+extension, and evaluates the script using that language. If the
+language is not supported, then the evaluation fails.
+
+@item show script-extension
+Display the current value of the @code{script-extension} option.
+
+@end table
+
@menu
* Sequences:: Canned Sequences of Commands
* Python:: Scripting @value{GDBN} using Python
terminal.
You can request the execution of a command file with the @code{source}
-command:
+command. Note that the @code{source} command is also used to evaluate
+scripts that are not Command Files. The exact behavior can be configured
+using the @code{script-extension} setting.
+@xref{Extending GDB,, Extending GDB}.
@table @code
@kindex source
disabled.
@end table
+It is also possible to execute a Python script from the @value{GDBN}
+interpreter:
+
+@table @code
+@item source @file{script-name}
+The script name must end with @samp{.py} and @value{GDBN} must be configured
+to recognize the script language based on filename extension using
+the @code{script-extension} setting. @xref{Extending GDB, ,Extending GDB}.
+
+@item python execfile ("script-name")
+This method is based on the @code{execfile} Python built-in function,
+and thus is always available.
+@end table
+
@node Python API
@subsection Python API
@cindex python api
* Commands In Python:: Implementing new commands in Python.
* Functions In Python:: Writing new convenience functions.
* Objfiles In Python:: Object files.
-* Frames In Python:: Acessing inferior stack frames from Python.
+* Frames In Python:: Accessing inferior stack frames from Python.
+* Blocks In Python:: Accessing frame blocks from Python.
+* Symbols In Python:: Python representation of symbols.
+* Symbol Tables In Python:: Python representation of symbol tables.
+* Lazy Strings In Python:: Python representation of lazy strings.
@end menu
@node Basic Python
If the optional @var{length} argument is given, the string will be
fetched and converted to the given length.
@end defmethod
+
+@defmethod Value lazy_string @r{[}encoding@r{]} @r{[}length@r{]}
+If this @code{gdb.Value} represents a string, then this method
+converts the contents to a @code{gdb.LazyString} (@pxref{Lazy Strings
+In Python}). Otherwise, this method will throw an exception.
+
+If the optional @var{encoding} argument is given, it must be a string
+naming the encoding of the @code{gdb.LazyString}. Some examples are:
+@samp{ascii}, @samp{iso-8859-6} or @samp{utf-8}. If the
+@var{encoding} argument is an encoding that @value{GDBN} does
+recognize, @value{GDBN} will raise an error.
+
+When a lazy string is printed, the @value{GDBN} encoding machinery is
+used to convert the string during printing. If the optional
+@var{encoding} argument is not provided, or is an empty string,
+@value{GDBN} will automatically select the encoding most suitable for
+the string type. For further information on encoding in @value{GDBN}
+please see @ref{Character Sets}.
+
+If the optional @var{length} argument is given, the string will be
+fetched and encoded to the length of characters specified. If
+the @var{length} argument is not provided, the string will be fetched
+and encoded until a null of appropriate width is found.
+@end defmethod
@end table
@node Types In Python
@end defivar
@node Frames In Python
-@subsubsection Acessing inferior stack frames from Python.
+@subsubsection Accessing inferior stack frames from Python.
@cindex frames in python
When the debugged program stops, @value{GDBN} is able to analyze its call
Returns the frame's resume address.
@end defmethod
+@defmethod Frame block
+Return the frame's code block. @xref{Blocks In Python}.
+@end defmethod
+
+@defmethod Frame function
+Return the symbol for the function corresponding to this frame.
+@xref{Symbols In Python}.
+@end defmethod
+
@defmethod Frame older
Return the frame that called this frame.
@end defmethod
Return the frame called by this frame.
@end defmethod
+@defmethod Frame find_sal
+Return the frame's symtab and line object.
+@xref{Symbol Tables In Python}.
+@end defmethod
+
@defmethod Frame read_var variable
Return the value of the given variable in this frame. @var{variable} must
be a string.
@end defmethod
+
+@defmethod Frame select
+Set this frame to be the selected frame. @xref{Stack, ,Examining the
+Stack}.
+@end defmethod
@end table
+@node Blocks In Python
+@subsubsection Accessing frame blocks from Python.
+
+@cindex blocks in python
+@tindex gdb.Block
+
+Within each frame, @value{GDBN} maintains information on each block
+stored in that frame. These blocks are organized hierarchically, and
+are represented individually in Python as a @code{gdb.Block}.
+Please see @ref{Frames In Python}, for a more in-depth discussion on
+frames. Furthermore, see @ref{Stack, ,Examining the Stack}, for more
+detailed technical information on @value{GDBN}'s book-keeping of the
+stack.
+
+The following block-related functions are available in the @code{gdb}
+module:
+
+@findex gdb.block_for_pc
+@defun block_for_pc pc
+Return the @code{gdb.Block} containing the given @var{pc} value. If the
+block cannot be found for the @var{pc} value specified, the function
+will return @code{None}.
+@end defun
+
+A @code{gdb.Block} object has the following attributes:
+
+@table @code
+@defivar Block start
+The start address of the block. This attribute is not writable.
+@end defivar
+
+@defivar Block end
+The end address of the block. This attribute is not writable.
+@end defivar
+
+@defivar Block function
+The name of the block represented as a @code{gdb.Symbol}. If the
+block is not named, then this attribute holds @code{None}. This
+attribute is not writable.
+@end defivar
+
+@defivar Block superblock
+The block containing this block. If this parent block does not exist,
+this attribute holds @code{None}. This attribute is not writable.
+@end defivar
+@end table
+
+@node Symbols In Python
+@subsubsection Python representation of Symbols.
+
+@cindex symbols in python
+@tindex gdb.Symbol
+
+@value{GDBN} represents every variable, function and type as an
+entry in a symbol table. @xref{Symbols, ,Examining the Symbol Table}.
+Similarly, Python represents these symbols in @value{GDBN} with the
+@code{gdb.Symbol} object.
+
+The following symbol-related functions are available in the @code{gdb}
+module:
+
+@findex gdb.lookup_symbol
+@defun lookup_symbol name [block] [domain]
+This function searches for a symbol by name. The search scope can be
+restricted to the parameters defined in the optional domain and block
+arguments.
+
+@var{name} is the name of the symbol. It must be a string. The
+optional @var{block} argument restricts the search to symbols visible
+in that @var{block}. The @var{block} argument must be a
+@code{gdb.Block} object. The optional @var{domain} argument restricts
+the search to the domain type. The @var{domain} argument must be a
+domain constant defined in the @code{gdb} module and described later
+in this chapter.
+@end defun
+
+A @code{gdb.Symbol} object has the following attributes:
+
+@table @code
+@defivar Symbol symtab
+The symbol table in which the symbol appears. This attribute is
+represented as a @code{gdb.Symtab} object. @xref{Symbol Tables In
+Python}. This attribute is not writable.
+@end defivar
+
+@defivar Symbol name
+The name of the symbol as a string. This attribute is not writable.
+@end defivar
+
+@defivar Symbol linkage_name
+The name of the symbol, as used by the linker (i.e., may be mangled).
+This attribute is not writable.
+@end defivar
+
+@defivar Symbol print_name
+The name of the symbol in a form suitable for output. This is either
+@code{name} or @code{linkage_name}, depending on whether the user
+asked @value{GDBN} to display demangled or mangled names.
+@end defivar
+
+@defivar Symbol addr_class
+The address class of the symbol. This classifies how to find the value
+of a symbol. Each address class is a constant defined in the
+@code{gdb} module and described later in this chapter.
+@end defivar
+
+@defivar Symbol is_argument
+@code{True} if the symbol is an argument of a function.
+@end defivar
+
+@defivar Symbol is_constant
+@code{True} if the symbol is a constant.
+@end defivar
+
+@defivar Symbol is_function
+@code{True} if the symbol is a function or a method.
+@end defivar
+
+@defivar Symbol is_variable
+@code{True} if the symbol is a variable.
+@end defivar
+@end table
+
+The available domain categories in @code{gdb.Symbol} are represented
+as constants in the @code{gdb} module:
+
+@table @code
+@findex SYMBOL_UNDEF_DOMAIN
+@findex gdb.SYMBOL_UNDEF_DOMAIN
+@item SYMBOL_UNDEF_DOMAIN
+This is used when a domain has not been discovered or none of the
+following domains apply. This usually indicates an error either
+in the symbol information or in @value{GDBN}'s handling of symbols.
+@findex SYMBOL_VAR_DOMAIN
+@findex gdb.SYMBOL_VAR_DOMAIN
+@item SYMBOL_VAR_DOMAIN
+This domain contains variables, function names, typedef names and enum
+type values.
+@findex SYMBOL_STRUCT_DOMAIN
+@findex gdb.SYMBOL_STRUCT_DOMAIN
+@item SYMBOL_STRUCT_DOMAIN
+This domain holds struct, union and enum type names.
+@findex SYMBOL_LABEL_DOMAIN
+@findex gdb.SYMBOL_LABEL_DOMAIN
+@item SYMBOL_LABEL_DOMAIN
+This domain contains names of labels (for gotos).
+@findex SYMBOL_VARIABLES_DOMAIN
+@findex gdb.SYMBOL_VARIABLES_DOMAIN
+@item SYMBOL_VARIABLES_DOMAIN
+This domain holds a subset of the @code{SYMBOLS_VAR_DOMAIN}; it
+contains everything minus functions and types.
+@findex SYMBOL_FUNCTIONS_DOMAIN
+@findex gdb.SYMBOL_FUNCTIONS_DOMAIN
+@item SYMBOL_FUNCTION_DOMAIN
+This domain contains all functions.
+@findex SYMBOL_TYPES_DOMAIN
+@findex gdb.SYMBOL_TYPES_DOMAIN
+@item SYMBOL_TYPES_DOMAIN
+This domain contains all types.
+@end table
+
+The available address class categories in @code{gdb.Symbol} are represented
+as constants in the @code{gdb} module:
+
+@table @code
+@findex SYMBOL_LOC_UNDEF
+@findex gdb.SYMBOL_LOC_UNDEF
+@item SYMBOL_LOC_UNDEF
+If this is returned by address class, it indicates an error either in
+the symbol information or in @value{GDBN}'s handling of symbols.
+@findex SYMBOL_LOC_CONST
+@findex gdb.SYMBOL_LOC_CONST
+@item SYMBOL_LOC_CONST
+Value is constant int.
+@findex SYMBOL_LOC_STATIC
+@findex gdb.SYMBOL_LOC_STATIC
+@item SYMBOL_LOC_STATIC
+Value is at a fixed address.
+@findex SYMBOL_LOC_REGISTER
+@findex gdb.SYMBOL_LOC_REGISTER
+@item SYMBOL_LOC_REGISTER
+Value is in a register.
+@findex SYMBOL_LOC_ARG
+@findex gdb.SYMBOL_LOC_ARG
+@item SYMBOL_LOC_ARG
+Value is an argument. This value is at the offset stored within the
+symbol inside the frame's argument list.
+@findex SYMBOL_LOC_REF_ARG
+@findex gdb.SYMBOL_LOC_REF_ARG
+@item SYMBOL_LOC_REF_ARG
+Value address is stored in the frame's argument list. Just like
+@code{LOC_ARG} except that the value's address is stored at the
+offset, not the value itself.
+@findex SYMBOL_LOC_REGPARM_ADDR
+@findex gdb.SYMBOL_LOC_REGPARM_ADDR
+@item SYMBOL_LOC_REGPARM_ADDR
+Value is a specified register. Just like @code{LOC_REGISTER} except
+the register holds the address of the argument instead of the argument
+itself.
+@findex SYMBOL_LOC_LOCAL
+@findex gdb.SYMBOL_LOC_LOCAL
+@item SYMBOL_LOC_LOCAL
+Value is a local variable.
+@findex SYMBOL_LOC_TYPEDEF
+@findex gdb.SYMBOL_LOC_TYPEDEF
+@item SYMBOL_LOC_TYPEDEF
+Value not used. Symbols in the domain @code{SYMBOL_STRUCT_DOMAIN} all
+have this class.
+@findex SYMBOL_LOC_BLOCK
+@findex gdb.SYMBOL_LOC_BLOCK
+@item SYMBOL_LOC_BLOCK
+Value is a block.
+@findex SYMBOL_LOC_CONST_BYTES
+@findex gdb.SYMBOL_LOC_CONST_BYTES
+@item SYMBOL_LOC_CONST_BYTES
+Value is a byte-sequence.
+@findex SYMBOL_LOC_UNRESOLVED
+@findex gdb.SYMBOL_LOC_UNRESOLVED
+@item SYMBOL_LOC_UNRESOLVED
+Value is at a fixed address, but the address of the variable has to be
+determined from the minimal symbol table whenever the variable is
+referenced.
+@findex SYMBOL_LOC_OPTIMIZED_OUT
+@findex gdb.SYMBOL_LOC_OPTIMIZED_OUT
+@item SYMBOL_LOC_OPTIMIZED_OUT
+The value does not actually exist in the program.
+@findex SYMBOL_LOC_COMPUTED
+@findex gdb.SYMBOL_LOC_COMPUTED
+@item SYMBOL_LOC_COMPUTED
+The value's address is a computed location.
+@end table
+
+@node Symbol Tables In Python
+@subsubsection Symbol table representation in Python.
+
+@cindex symbol tables in python
+@tindex gdb.Symtab
+@tindex gdb.Symtab_and_line
+
+Access to symbol table data maintained by @value{GDBN} on the inferior
+is exposed to Python via two objects: @code{gdb.Symtab_and_line} and
+@code{gdb.Symtab}. Symbol table and line data for a frame is returned
+from the @code{find_sal} method in @code{gdb.Frame} object.
+@xref{Frames In Python}.
+
+For more information on @value{GDBN}'s symbol table management, see
+@ref{Symbols, ,Examining the Symbol Table}, for more information.
+
+A @code{gdb.Symtab_and_line} object has the following attributes:
+
+@table @code
+@defivar Symtab_and_line symtab
+The symbol table object (@code{gdb.Symtab}) for this frame.
+This attribute is not writable.
+@end defivar
+
+@defivar Symtab_and_line pc
+Indicates the current program counter address. This attribute is not
+writable.
+@end defivar
+
+@defivar Symtab_and_line line
+Indicates the current line number for this object. This
+attribute is not writable.
+@end defivar
+@end table
+
+A @code{gdb.Symtab} object has the following attributes:
+
+@table @code
+@defivar Symtab filename
+The symbol table's source filename. This attribute is not writable.
+@end defivar
+
+@defivar Symtab objfile
+The symbol table's backing object file. @xref{Objfiles In Python}.
+This attribute is not writable.
+@end defivar
+@end table
+
+The following methods are provided:
+
+@table @code
+@defmethod Symtab fullname
+Return the symbol table's source absolute file name.
+@end defmethod
+@end table
+
+@node Lazy Strings In Python
+@subsubsection Python representation of lazy strings.
+
+@cindex lazy strings in python
+@tindex gdb.LazyString
+
+A @dfn{lazy string} is a string whose contents is not retrieved or
+encoded until it is needed.
+
+A @code{gdb.LazyString} is represented in @value{GDBN} as an
+@code{address} that points to a region of memory, an @code{encoding}
+that will be used to encode that region of memory, and a @code{length}
+to delimit the region of memory that represents the string. The
+difference between a @code{gdb.LazyString} and a string wrapped within
+a @code{gdb.Value} is that a @code{gdb.LazyString} will be treated
+differently by @value{GDBN} when printing. A @code{gdb.LazyString} is
+retrieved and encoded during printing, while a @code{gdb.Value}
+wrapping a string is immediately retrieved and encoded on creation.
+
+A @code{gdb.LazyString} object has the following functions:
+
+@defmethod LazyString value
+Convert the @code{gdb.LazyString} to a @code{gdb.Value}. This value
+will point to the string in memory, but will lose all the delayed
+retrieval, encoding and handling that @value{GDBN} applies to a
+@code{gdb.LazyString}.
+@end defmethod
+
+@defivar LazyString address
+This attribute holds the address of the string. This attribute is not
+writable.
+@end defivar
+
+@defivar LazyString length
+This attribute holds the length of the string in characters. If the
+length is -1, then the string will be fetched and encoded up to the
+first null of appropriate width. This attribute is not writable.
+@end defivar
+
+@defivar LazyString encoding
+This attribute holds the encoding that will be applied to the string
+when the string is printed by @value{GDBN}. If the encoding is not
+set, or contains an empty string, then @value{GDBN} will select the
+most appropriate encoding when the string is printed. This attribute
+is not writable.
+@end defivar
+
+@defivar LazyString type
+This attribute holds the type that is represented by the lazy string's
+type. For a lazy string this will always be a pointer type. To
+resolve this to the lazy string's character type, use the type's
+@code{target} method. @xref{Types In Python}. This attribute is not
+writable.
+@end defivar
+
@node Interpreters
@chapter Command Interpreters
@cindex command interpreters
In general, the content of a thread group may be only retrieved only
after attaching to that thread group.
+Thread groups are related to inferiors (@pxref{Inferiors and
+Programs}). Each inferior corresponds to a thread group of a special
+type @samp{process}, and some additional operations are permitted on
+such thread groups.
+
@c %%%%%%%%%%%%%%%%%%%%%%%%%%%% SECTION %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@node GDB/MI Command Syntax
@section @sc{gdb/mi} Command Syntax
* GDB/MI Stream Records::
* GDB/MI Async Records::
* GDB/MI Frame Information::
+* GDB/MI Thread Information::
@end menu
@node GDB/MI Result Records
@item "^running"
@findex ^running
-@c Is this one correct? Should it be an out-of-band notification?
-The asynchronous operation was successfully started. The target is
-running.
+This result record is equivalent to @samp{^done}. Historically, it
+was output instead of @samp{^done} if the command has resumed the
+target. This behaviour is maintained for backward compatibility, but
+all frontends should treat @samp{^done} and @samp{^running}
+identically and rely on the @samp{*running} output record to determine
+which threads are resumed.
@item "^connected"
@findex ^connected
all threads together, or even for a single thread, if the thread must
be stepped though some code before letting it run freely.
-@item *stopped,reason="@var{reason}",thread-id="@var{id}",stopped-threads="@var{stopped}"
+@item *stopped,reason="@var{reason}",thread-id="@var{id}",stopped-threads="@var{stopped}",core="@var{core}"
The target has stopped. The @var{reason} field can have one of the
following values:
value of @code{"all"}. Otherwise, the value of the @var{stopped}
field will be a list of thread identifiers. Presently, this list will
always include a single thread, but frontend should be prepared to see
-several threads in the list.
+several threads in the list. The @var{core} field reports the
+processor core on which the stop event has happened. This field may be absent
+if such information is not available.
+
+@item =thread-group-added,id="@var{id}"
+@itemx =thread-group-removed,id="@var{id}"
+A thread group was either added or removed. The @var{id} field
+contains the @value{GDBN} identifier of the thread group. When a thread
+group is added, it generally might not be associated with a running
+process. When a thread group is removed, its id becomes invalid and
+cannot be used in any way.
+
+@item =thread-group-started,id="@var{id}",pid="@var{pid}"
+A thread group became associated with a running program,
+either because the program was just started or the thread group
+was attached to a program. The @var{id} field contains the
+@value{GDBN} identifier of the thread group. The @var{pid} field
+contains process identifier, specific to the operating system.
-@item =thread-group-created,id="@var{id}"
@itemx =thread-group-exited,id="@var{id}"
-A thread thread group either was attached to, or has exited/detached
+A thread group is no longer associated with a running program,
+either because the program has exited, or because it was detached
from. The @var{id} field contains the @value{GDBN} identifier of the
thread group.
library file on the target, and on the host respectively. For native
debugging, both those fields have the same value. The
@var{symbols-loaded} field reports if the debug symbols for this
-library are loaded.
+library are loaded. The @var{thread-group} field, if present,
+specifies the id of the thread group in whose context the library was loaded.
+If the field is absent, it means the library was loaded in the context
+of all present thread groups.
@item =library-unloaded,...
Reports that a library was unloaded by the program. This notification
has 3 fields---@var{id}, @var{target-name} and @var{host-name} with
-the same meaning as for the @code{=library-loaded} notification
+the same meaning as for the @code{=library-loaded} notification.
+The @var{thread-group} field, if present, specifies the id of the
+thread group in whose context the library was unloaded. If the field is
+absent, it means the library was unloaded in the context of all present
+thread groups.
@end table
@end table
+@node GDB/MI Thread Information
+@subsection @sc{gdb/mi} Thread Information
+
+Whenever @value{GDBN} has to report an information about a thread, it
+uses a tuple with the following fields:
+
+@table @code
+@item id
+The numeric id assigned to the thread by @value{GDBN}. This field is
+always present.
+
+@item target-id
+Target-specific string identifying the thread. This field is always present.
+
+@item details
+Additional information about the thread provided by the target.
+It is supposed to be human-readable and not interpreted by the
+frontend. This field is optional.
+
+@item state
+Either @samp{stopped} or @samp{running}, depending on whether the
+thread is presently running. This field is always present.
+
+@item core
+The value of this field is an integer number of the processor core the
+thread was last seen on. This field is optional.
+@end table
+
@c %%%%%%%%%%%%%%%%%%%%%%%%%%%% SECTION %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@node GDB/MI Simple Examples
@subsubheading Synopsis
@smallexample
- -exec-continue [--all|--thread-group N]
+ -exec-continue [--reverse] [--all|--thread-group N]
@end smallexample
-Resumes the execution of the inferior program until a breakpoint is
-encountered, or until the inferior exits. In all-stop mode
-(@pxref{All-Stop Mode}), may resume only one thread, or all threads,
-depending on the value of the @samp{scheduler-locking} variable. In
-non-stop mode (@pxref{Non-Stop Mode}), if the @samp{--all} is not
-specified, only the thread specified with the @samp{--thread} option
-(or current thread, if no @samp{--thread} is provided) is resumed. If
-@samp{--all} is specified, all threads will be resumed. The
-@samp{--all} option is ignored in all-stop mode. If the
-@samp{--thread-group} options is specified, then all threads in that
-thread group are resumed.
+Resumes the execution of the inferior program, which will continue
+to execute until it reaches a debugger stop event. If the
+@samp{--reverse} option is specified, execution resumes in reverse until
+it reaches a stop event. Stop events may include
+@itemize @bullet
+@item
+breakpoints or watchpoints
+@item
+signals or exceptions
+@item
+the end of the process (or its beginning under @samp{--reverse})
+@item
+the end or beginning of a replay log if one is being used.
+@end itemize
+In all-stop mode (@pxref{All-Stop
+Mode}), may resume only one thread, or all threads, depending on the
+value of the @samp{scheduler-locking} variable. If @samp{--all} is
+specified, all threads (in all inferiors) will be resumed. The @samp{--all} option is
+ignored in all-stop mode. If the @samp{--thread-group} options is
+specified, then all threads in that thread group are resumed.
@subsubheading @value{GDBN} Command
@subsubheading Synopsis
@smallexample
- -exec-finish
+ -exec-finish [--reverse]
@end smallexample
Resumes the execution of the inferior program until the current
function is exited. Displays the results returned by the function.
+If the @samp{--reverse} option is specified, resumes the reverse
+execution of the inferior program until the point where current
+function was called.
@subsubheading @value{GDBN} Command
reported after that using the @samp{*stopped} notification.
In non-stop mode, only the context thread is interrupted by default.
-All threads will be interrupted if the @samp{--all} option is
-specified. If the @samp{--thread-group} option is specified, all
-threads in that group will be interrupted.
+All threads (in all inferiors) will be interrupted if the
+@samp{--all} option is specified. If the @samp{--thread-group}
+option is specified, all threads in that group will be interrupted.
@subsubheading @value{GDBN} Command
@subsubheading Synopsis
@smallexample
- -exec-next
+ -exec-next [--reverse]
@end smallexample
Resumes execution of the inferior program, stopping when the beginning
of the next source line is reached.
+If the @samp{--reverse} option is specified, resumes reverse execution
+of the inferior program, stopping at the beginning of the previous
+source line. If you issue this command on the first line of a
+function, it will take you back to the caller of that function, to the
+source line where the function was called.
+
+
@subsubheading @value{GDBN} Command
The corresponding @value{GDBN} command is @samp{next}.
@subsubheading Synopsis
@smallexample
- -exec-next-instruction
+ -exec-next-instruction [--reverse]
@end smallexample
Executes one machine instruction. If the instruction is a function
instruction in the middle of a source line, the address will be
printed as well.
+If the @samp{--reverse} option is specified, resumes reverse execution
+of the inferior program, stopping at the previous instruction. If the
+previously executed instruction was a return from another function,
+it will continue to execute in reverse until the call to that function
+(from the current stack frame) is reached.
+
@subsubheading @value{GDBN} Command
The corresponding @value{GDBN} command is @samp{nexti}.
@subsubheading Synopsis
@smallexample
- -exec-run
+ -exec-run [--all | --thread-group N]
@end smallexample
Starts execution of the inferior from the beginning. The inferior
exits. In the latter case the output will include an exit code, if
the program has exited exceptionally.
+When no option is specified, the current inferior is started. If the
+@samp{--thread-group} option is specified, it should refer to a thread
+group of type @samp{process}, and that thread group will be started.
+If the @samp{--all} option is specified, then all inferiors will be started.
+
@subsubheading @value{GDBN} Command
The corresponding @value{GDBN} command is @samp{run}.
@subsubheading Synopsis
@smallexample
- -exec-step
+ -exec-step [--reverse]
@end smallexample
Resumes execution of the inferior program, stopping when the beginning
of the next source line is reached, if the next source line is not a
function call. If it is, stop at the first instruction of the called
-function.
+function. If the @samp{--reverse} option is specified, resumes reverse
+execution of the inferior program, stopping at the beginning of the
+previously executed source line.
@subsubheading @value{GDBN} Command
@subsubheading Synopsis
@smallexample
- -exec-step-instruction
+ -exec-step-instruction [--reverse]
@end smallexample
-Resumes the inferior which executes one machine instruction. The
-output, once @value{GDBN} has stopped, will vary depending on whether
-we have stopped in the middle of a source line or not. In the former
-case, the address at which the program stopped will be printed as
-well.
+Resumes the inferior which executes one machine instruction. If the
+@samp{--reverse} option is specified, resumes reverse execution of the
+inferior program, stopping at the previously executed instruction.
+The output, once @value{GDBN} has stopped, will vary depending on
+whether we have stopped in the middle of a source line or not. In the
+former case, the address at which the program stopped will be printed
+as well.
@subsubheading @value{GDBN} Command
@subheading Synopsis
@smallexample
--list-thread-groups [ --available ] [ @var{group} ]
+-list-thread-groups [ --available ] [ --recurse 1 ] [ @var{group} ... ]
@end smallexample
-When used without the @var{group} parameter, lists top-level thread
-groups that are being debugged. When used with the @var{group}
-parameter, the children of the specified group are listed. The
-children can be either threads, or other groups. At present,
-@value{GDBN} will not report both threads and groups as children at
-the same time, but it may change in future.
+Lists thread groups (@pxref{Thread groups}). When a single thread
+group is passed as the argument, lists the children of that group.
+When several thread group are passed, lists information about those
+thread groups. Without any parameters, lists information about all
+top-level thread groups.
+
+Normally, thread groups that are being debugged are reported.
+With the @samp{--available} option, @value{GDBN} reports thread groups
+available on the target.
+
+The output of this command may have either a @samp{threads} result or
+a @samp{groups} result. The @samp{thread} result has a list of tuples
+as value, with each tuple describing a thread (@pxref{GDB/MI Thread
+Information}). The @samp{groups} result has a list of tuples as value,
+each tuple describing a thread group. If top-level groups are
+requested (that is, no parameter is passed), or when several groups
+are passed, the output always has a @samp{groups} result. The format
+of the @samp{group} result is described below.
+
+To reduce the number of roundtrips it's possible to list thread groups
+together with their children, by passing the @samp{--recurse} option
+and the recursion depth. Presently, only recursion depth of 1 is
+permitted. If this option is present, then every reported thread group
+will also include its children, either as @samp{group} or
+@samp{threads} field.
+
+In general, any combination of option and parameters is permitted, with
+the following caveats:
+
+@itemize @bullet
+@item
+When a single thread group is passed, the output will typically
+be the @samp{threads} result. Because threads may not contain
+anything, the @samp{recurse} option will be ignored.
+
+@item
+When the @samp{--available} option is passed, limited information may
+be available. In particular, the list of threads of a process might
+be inaccessible. Further, specifying specific thread groups might
+not give any performance advantage over listing all thread groups.
+The frontend should assume that @samp{-list-thread-groups --available}
+is always an expensive operation and cache the results.
+
+@end itemize
+
+The @samp{groups} result is a list of tuples, where each tuple may
+have the following fields:
+
+@table @code
+@item id
+Identifier of the thread group. This field is always present.
+The identifier is an opaque string; frontends should not try to
+convert it to an integer, even though it might look like one.
+
+@item type
+The type of the thread group. At present, only @samp{process} is a
+valid type.
+
+@item pid
+The target-specific process identifier. This field is only present
+for thread groups of type @samp{process} and only if the process exists.
+
+@item num_children
+The number of children this thread group has. This field may be
+absent for an available thread group.
+
+@item threads
+This field has a list of tuples as value, each tuple describing a
+thread. It may be present if the @samp{--recurse} option is
+specified, and it's actually possible to obtain the threads.
+
+@item cores
+This field is a list of integers, each identifying a core that one
+thread of the group is running on. This field may be absent if
+such information is not available.
-With the @samp{--available} option, instead of reporting groups that
-are been debugged, GDB will report all thread groups available on the
-target. Using the @samp{--available} option together with @var{group}
-is not allowed.
+@item executable
+The name of the executable file that corresponds to this thread group.
+The field is only present for thread groups of type @samp{process},
+and only if there is a corresponding executable file.
+
+@end table
@subheading Example
@{id="1",target-id="Thread 0xb7e156b0 (LWP 21254)",
frame=@{level="0",addr="0x0804891f",func="foo",args=[@{name="i",value="10"@}],
file="/tmp/a.c",fullname="/tmp/a.c",line="158"@},state="running"@}]]
+-list-thread-groups --available
+^done,groups=[@{id="17",type="process",pid="yyy",num_children="2",cores=[1,2]@}]
+-list-thread-groups --available --recurse 1
+ ^done,groups=[@{id="17", types="process",pid="yyy",num_children="2",cores=[1,2],
+ threads=[@{id="1",target-id="Thread 0xb7e14b90",cores=[1]@},
+ @{id="2",target-id="Thread 0xb7e14b90",cores=[2]@}]@},..]
+-list-thread-groups --available --recurse 1 17 18
+^done,groups=[@{id="17", types="process",pid="yyy",num_children="2",cores=[1,2],
+ threads=[@{id="1",target-id="Thread 0xb7e14b90",cores=[1]@},
+ @{id="2",target-id="Thread 0xb7e14b90",cores=[2]@}]@},...]
+@end smallexample
+
+
+@subheading The @code{-add-inferior} Command
+@findex -add-inferior
+
+@subheading Synopsis
+
+@smallexample
+-add-inferior
+@end smallexample
+
+Creates a new inferior (@pxref{Inferiors and Programs}). The created
+inferior is not associated with any executable. Such association may
+be established with the @samp{-file-exec-and-symbols} command
+(@pxref{GDB/MI File Commands}). The command response has a single
+field, @samp{thread-group}, whose value is the identifier of the
+thread group corresponding to the new inferior.
+
+@subheading Example
+
+@smallexample
+@value{GDBP}
+-add-inferior
+^done,thread-group="i3"
@end smallexample
@subheading The @code{-interpreter-exec} Command
* Packets::
* Stop Reply Packets::
* General Query Packets::
-* Register Packet Format::
+* Architecture-Specific Protocol Details::
* Tracepoint Packets::
* Host I/O Packets::
* Interrupts::
* File-I/O Remote Protocol Extension::
* Library List Format::
* Memory Map Format::
+* Thread List Format::
@end menu
@node Overview
for an error
@end table
-@item z @var{type},@var{addr},@var{length}
-@itemx Z @var{type},@var{addr},@var{length}
+@item z @var{type},@var{addr},@var{kind}
+@itemx Z @var{type},@var{addr},@var{kind}
@anchor{insert breakpoint or watchpoint packet}
@cindex @samp{z} packet
@cindex @samp{Z} packets
Insert (@samp{Z}) or remove (@samp{z}) a @var{type} breakpoint or
-watchpoint starting at address @var{address} and covering the next
-@var{length} bytes.
+watchpoint starting at address @var{address} of kind @var{kind}.
Each breakpoint and watchpoint packet @var{type} is documented
separately.
avoid potential problems with duplicate packets, the operations should
be implemented in an idempotent way.}
-@item z0,@var{addr},@var{length}
-@itemx Z0,@var{addr},@var{length}
+@item z0,@var{addr},@var{kind}
+@itemx Z0,@var{addr},@var{kind}
@cindex @samp{z0} packet
@cindex @samp{Z0} packet
Insert (@samp{Z0}) or remove (@samp{z0}) a memory breakpoint at address
-@var{addr} of size @var{length}.
+@var{addr} of type @var{kind}.
A memory breakpoint is implemented by replacing the instruction at
@var{addr} with a software breakpoint or trap instruction. The
-@var{length} is used by targets that indicates the size of the
-breakpoint (in bytes) that should be inserted (e.g., the @sc{arm} and
-@sc{mips} can insert either a 2 or 4 byte breakpoint).
+@var{kind} is target-specific and typically indicates the size of
+the breakpoint in bytes that should be inserted. E.g., the @sc{arm}
+and @sc{mips} can insert either a 2 or 4 byte breakpoint. Some
+architectures have additional meanings for @var{kind};
+see @ref{Architecture-Specific Protocol Details}.
@emph{Implementation note: It is possible for a target to copy or move
code that contains memory breakpoints (e.g., when implementing
for an error
@end table
-@item z1,@var{addr},@var{length}
-@itemx Z1,@var{addr},@var{length}
+@item z1,@var{addr},@var{kind}
+@itemx Z1,@var{addr},@var{kind}
@cindex @samp{z1} packet
@cindex @samp{Z1} packet
Insert (@samp{Z1}) or remove (@samp{z1}) a hardware breakpoint at
-address @var{addr} of size @var{length}.
+address @var{addr}.
A hardware breakpoint is implemented using a mechanism that is not
-dependant on being able to modify the target's memory.
+dependant on being able to modify the target's memory. @var{kind}
+has the same meaning as in @samp{Z0} packets.
@emph{Implementation note: A hardware breakpoint is not affected by code
movement.}
for an error
@end table
-@item z2,@var{addr},@var{length}
-@itemx Z2,@var{addr},@var{length}
+@item z2,@var{addr},@var{kind}
+@itemx Z2,@var{addr},@var{kind}
@cindex @samp{z2} packet
@cindex @samp{Z2} packet
-Insert (@samp{Z2}) or remove (@samp{z2}) a write watchpoint.
+Insert (@samp{Z2}) or remove (@samp{z2}) a write watchpoint at @var{addr}.
+@var{kind} is interpreted as the number of bytes to watch.
Reply:
@table @samp
for an error
@end table
-@item z3,@var{addr},@var{length}
-@itemx Z3,@var{addr},@var{length}
+@item z3,@var{addr},@var{kind}
+@itemx Z3,@var{addr},@var{kind}
@cindex @samp{z3} packet
@cindex @samp{Z3} packet
-Insert (@samp{Z3}) or remove (@samp{z3}) a read watchpoint.
+Insert (@samp{Z3}) or remove (@samp{z3}) a read watchpoint at @var{addr}.
+@var{kind} is interpreted as the number of bytes to watch.
Reply:
@table @samp
for an error
@end table
-@item z4,@var{addr},@var{length}
-@itemx Z4,@var{addr},@var{length}
+@item z4,@var{addr},@var{kind}
+@itemx Z4,@var{addr},@var{kind}
@cindex @samp{z4} packet
@cindex @samp{Z4} packet
-Insert (@samp{Z4}) or remove (@samp{z4}) an access watchpoint.
+Insert (@samp{Z4}) or remove (@samp{z4}) an access watchpoint at @var{addr}.
+@var{kind} is interpreted as the number of bytes to watch.
Reply:
@table @samp
If @var{n} is @samp{thread}, then @var{r} is the @var{thread-id} of
the stopped thread, as specified in @ref{thread-id syntax}.
+@item
+If @var{n} is @samp{core}, then @var{r} is the hexadecimal number of
+the core on which the stop event was detected.
+
@item
If @var{n} is a recognized @dfn{stop reason}, it describes a more
specific event that stopped the target. The currently defined stop
beginning when executing backward) of the log. The value of @var{r}
will be either @samp{begin} or @samp{end}. @xref{Reverse Execution},
for more information.
-
-
@end table
@item W @var{AA}
@tab @samp{-}
@tab Yes
+@item @samp{qXfer:threads:read}
+@tab No
+@tab @samp{-}
+@tab Yes
+
+
@item @samp{QNonStop}
@tab No
@tab @samp{-}
The remote stub understands the @samp{qXfer:siginfo:write} packet
(@pxref{qXfer siginfo write}).
+@item qXfer:threads:read
+The remote stub understands the @samp{qXfer:threads:read} packet
+(@pxref{qXfer threads read}).
+
@item QNonStop
The remote stub understands the @samp{QNonStop} packet
(@pxref{QNonStop}).
(if available), until the target ceases to request them.
@end table
-@item QTDP
+@item qTBuffer
+@item QTDisconnected
+@itemx QTDP
+@itemx QTDV
+@itemx qTfP
+@itemx qTfV
@itemx QTFrame
@xref{Tracepoint Packets}.
conventions above. Please don't use this packet as a model for new
packets.)
-@item QTStart
+@item QTSave
+@item qTsP
+@item qTsV
+@itemx QTStart
@itemx QTStop
@itemx QTinit
@itemx QTro
@itemx qTStatus
+@itemx qTV
@xref{Tracepoint Packets}.
@item qXfer:@var{object}:read:@var{annex}:@var{offset},@var{length}
by supplying an appropriate @samp{qSupported} response
(@pxref{qSupported}).
+@item qXfer:threads:read::@var{offset},@var{length}
+@anchor{qXfer threads read}
+Access the list of threads on target. @xref{Thread List Format}. The
+annex part of the generic @samp{qXfer} packet must be empty
+(@pxref{qXfer read}).
+
+This packet is not probed by default; the remote stub must request it,
+by supplying an appropriate @samp{qSupported} response (@pxref{qSupported}).
+
@item qXfer:osdata:read::@var{offset},@var{length}
@anchor{qXfer osdata read}
Access the target's @dfn{operating system information}.
@end table
-@node Register Packet Format
-@section Register Packet Format
+@node Architecture-Specific Protocol Details
+@section Architecture-Specific Protocol Details
+
+This section describes how the remote protocol is applied to specific
+target architectures. Also see @ref{Standard Target Features}, for
+details of XML target descriptions for each architecture.
+
+@subsection ARM
+
+@subsubsection Breakpoint Kinds
+
+These breakpoint kinds are defined for the @samp{Z0} and @samp{Z1} packets.
+
+@table @r
+
+@item 2
+16-bit Thumb mode breakpoint.
+
+@item 3
+32-bit Thumb mode (Thumb-2) breakpoint.
+
+@item 4
+32-bit ARM mode breakpoint.
+
+@end table
+
+@subsection MIPS
+
+@subsubsection Register Packet Format
The following @code{g}/@code{G} packets have previously been defined.
In the below, some thirty-two bit registers are transferred as
@table @samp
-@item QTDP:@var{n}:@var{addr}:@var{ena}:@var{step}:@var{pass}[:X@var{len},@var{bytes}]@r{[}-@r{]}
+@item QTDP:@var{n}:@var{addr}:@var{ena}:@var{step}:@var{pass}[:F@var{flen}][:X@var{len},@var{bytes}]@r{[}-@r{]}
Create a new tracepoint, number @var{n}, at @var{addr}. If @var{ena}
is @samp{E}, then the tracepoint is enabled; if it is @samp{D}, then
the tracepoint is disabled. @var{step} is the tracepoint's step
-count, and @var{pass} is its pass count. If an @samp{X} is present,
-it introduces a tracepoint condition, which consists of a hexadecimal
-length, followed by a comma and hex-encoded bytes, in a manner similar
-to action encodings as described below. If the trailing @samp{-} is
-present, further @samp{QTDP} packets will follow to specify this
-tracepoint's actions.
+count, and @var{pass} is its pass count. If an @samp{F} is present,
+then the tracepoint is to be a fast tracepoint, and the @var{flen} is
+the number of bytes that the target should copy elsewhere to make room
+for the tracepoint. If an @samp{X} is present, it introduces a
+tracepoint condition, which consists of a hexadecimal length, followed
+by a comma and hex-encoded bytes, in a manner similar to action
+encodings as described below. If the trailing @samp{-} is present,
+further @samp{QTDP} packets will follow to specify this tracepoint's
+actions.
Replies:
@table @samp
@item QTFrame:range:@var{start}:@var{end}
Like @samp{QTFrame:@var{n}}, but select the first tracepoint frame after the
currently selected frame whose PC is between @var{start} (inclusive)
-and @var{end} (exclusive); @var{start} and @var{end} are hexadecimal
+and @var{end} (inclusive); @var{start} and @var{end} are hexadecimal
numbers.
@item QTFrame:outside:@var{start}:@var{end}
Like @samp{QTFrame:range:@var{start}:@var{end}}, but select the first
-frame @emph{outside} the given range of addresses.
+frame @emph{outside} the given range of addresses (exclusive).
@item QTStart
Begin the tracepoint experiment. Begin collecting data from tracepoint
still have the same contents they did when the tracepoint was hit, so
there's no reason for the stub to refuse to provide their contents.
+@item QTDisconnected:@var{value}
+Set the choice to what to do with the tracing run when @value{GDBN}
+disconnects from the target. A @var{value} of 1 directs the target to
+continue the tracing run, while 0 tells the target to stop tracing if
+@value{GDBN} is no longer in the picture.
+
@item qTStatus
Ask the stub if there is a trace experiment running right now.
was not collected.
@end table
+@item qTfP
+@itemx qTsP
+These packets request data about tracepoints that are being used by
+the target. @value{GDBN} sends @code{qTfP} to get the first piece
+of data, and multiple @code{qTsP} to get additional pieces. Replies
+to these packets generally take the form of the @code{QTDP} packets
+that define tracepoints. (FIXME add detailed syntax)
+
+@item qTfV
+@itemx qTsV
+These packets request data about trace state variables that are on the
+target. @value{GDBN} sends @code{qTfV} to get the first vari of data,
+and multiple @code{qTsV} to get additional variables. Replies to
+these packets follow the syntax of the @code{QTDV} packets that define
+trace state variables.
+
+@item QTSave:@var{filename}
+This packet directs the target to save trace data to the file name
+@var{filename} in the target's filesystem. @var{filename} is encoded
+as a hex string; the interpretation of the file name (relative vs
+absolute, wild cards, etc) is up to the target.
+
+@item qTBuffer:@var{offset},@var{len}
+Return up to @var{len} bytes of the current contents of trace buffer,
+starting at @var{offset}. The trace buffer is treated as if it were
+a contiguous collection of traceframes, as per the trace file format.
+The reply consists as many hex-encoded bytes as the target can deliver
+in a packet; it is not an error to return fewer than were asked for.
+A reply consisting of just @code{l} indicates that no bytes are
+available.
+
@end table
@node Host I/O Packets
<!ATTLIST property name CDATA #REQUIRED>
@end smallexample
+@node Thread List Format
+@section Thread List Format
+@cindex thread list format
+
+To efficiently update the list of threads and their attributes,
+@value{GDBN} issues the @samp{qXfer:threads:read} packet
+(@pxref{qXfer threads read}) and obtains the XML document with
+the following structure:
+
+@smallexample
+<?xml version="1.0"?>
+<threads>
+ <thread id="id" core="0">
+ ... description ...
+ </thread>
+</threads>
+@end smallexample
+
+Each @samp{thread} element must have the @samp{id} attribute that
+identifies the thread (@pxref{thread-id syntax}). The
+@samp{core} attribute, if present, specifies which processor core
+the thread was last executing on. The content of the of @samp{thread}
+element is interpreted as human-readable auxilliary information.
+
@include agentexpr.texi
+@node Trace File Format
+@appendix Trace File Format
+@cindex trace file format
+
+The trace file comes in three parts: a header, a textual description
+section, and a trace frame section with binary data.
+
+The header has the form @code{\x7fTRACE0\n}. The first byte is
+@code{0x7f} so as to indicate that the file contains binary data,
+while the @code{0} is a version number that may have different values
+in the future.
+
+The description section consists of multiple lines of @sc{ascii} text
+separated by newline characters (@code{0xa}). The lines may include a
+variety of optional descriptive or context-setting information, such
+as tracepoint definitions or register set size. @value{GDBN} will
+ignore any line that it does not recognize. An empty line marks the end
+of this section.
+
+@c FIXME add some specific types of data
+
+The trace frame section consists of a number of consecutive frames.
+Each frame begins with a two-byte tracepoint number, followed by a
+four-byte size giving the amount of data in the frame. The data in
+the frame consists of a number of blocks, each introduced by a
+character indicating its type (at least register, memory, and trace
+state variable). The data in this section is raw binary, not a
+hexadecimal or other encoding; its endianness matches the target's
+endianness.
+
+@c FIXME bi-arch may require endianness/arch info in description section
+
+@table @code
+@item R @var{bytes}
+Register block. The number and ordering of bytes matches that of a
+@code{g} packet in the remote protocol. Note that these are the
+actual bytes, in target order and @value{GDBN} register order, not a
+hexadecimal encoding.
+
+@item M @var{address} @var{length} @var{bytes}...
+Memory block. This is a contiguous block of memory, at the 8-byte
+address @var{address}, with a 2-byte length @var{length}, followed by
+@var{length} bytes.
+
+@item V @var{number} @var{value}
+Trace state variable block. This records the 8-byte signed value
+@var{value} of trace state variable numbered @var{number}.
+
+@end table
+
+Future enhancements of the trace file format may include additional types
+of blocks.
+
@node Target Descriptions
@appendix Target Descriptions
@cindex target descriptions
@item arm_fpa_ext
The 12-byte extended precision format used by ARM FPA registers.
+@item i387_ext
+The 10-byte extended precision format used by x87 registers.
+
+@item i386_eflags
+32bit @sc{eflags} register used by x86.
+
+@item i386_mxcsr
+32bit @sc{mxcsr} register used by x86.
+
@end table
@node Standard Target Features
@menu
* ARM Features::
+* i386 Features::
* MIPS Features::
* M68K Features::
* PowerPC Features::
If this feature is present, @samp{org.gnu.gdb.arm.vfp} must also
be present and include 32 double-precision registers.
+@node i386 Features
+@subsection i386 Features
+@cindex target descriptions, i386 features
+
+The @samp{org.gnu.gdb.i386.core} feature is required for i386/amd64
+targets. It should describe the following registers:
+
+@itemize @minus
+@item
+@samp{eax} through @samp{edi} plus @samp{eip} for i386
+@item
+@samp{rax} through @samp{r15} plus @samp{rip} for amd64
+@item
+@samp{eflags}, @samp{cs}, @samp{ss}, @samp{ds}, @samp{es},
+@samp{fs}, @samp{gs}
+@item
+@samp{st0} through @samp{st7}
+@item
+@samp{fctrl}, @samp{fstat}, @samp{ftag}, @samp{fiseg}, @samp{fioff},
+@samp{foseg}, @samp{fooff} and @samp{fop}
+@end itemize
+
+The register sets may be different, depending on the target.
+
+The @samp{org.gnu.gdb.i386.sse} feature is required. It should
+describe registers:
+
+@itemize @minus
+@item
+@samp{xmm0} through @samp{xmm7} for i386
+@item
+@samp{xmm0} through @samp{xmm15} for amd64
+@item
+@samp{mxcsr}
+@end itemize
+
+The @samp{org.gnu.gdb.i386.linux} feature is optional. It should
+describe a single register, @samp{orig_eax}.
+
@node MIPS Features
@subsection MIPS Features
@cindex target descriptions, MIPS features
<column name="pid">1</column>
<column name="user">root</column>
<column name="command">/sbin/init</column>
+ <column name="cores">1,2,3</column>
</item>
</osdata>
@end smallexample
Each item should include a column whose name is @samp{pid}. The value
of that column should identify the process on the target. The
@samp{user} and @samp{command} columns are optional, and will be
-displayed by @value{GDBN}. Target may provide additional columns,
+displayed by @value{GDBN}. The @samp{cores} column, if present,
+should contain a comma-separated list of cores that this process
+is running on. Target may provide additional columns,
which @value{GDBN} currently ignores.
@include gpl.texi
projects / deliverable / binutils-gdb.git / blobdiff