\input texinfo @c -*-texinfo-*-
-@c Copyright (C) 1988-2018 Free Software Foundation, Inc.
+@c Copyright (C) 1988-2019 Free Software Foundation, Inc.
@c
@c %**start of header
@c makeinfo ignores cmds prev to setfilename, so its arg cannot make use
@copying
@c man begin COPYRIGHT
-Copyright @copyright{} 1988-2018 Free Software Foundation, Inc.
+Copyright @copyright{} 1988-2019 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
@end ifset
Version @value{GDBVN}.
-Copyright (C) 1988-2018 Free Software Foundation, Inc.
+Copyright (C) 1988-2019 Free Software Foundation, Inc.
This edition of the GDB manual is dedicated to the memory of Fred
Fish. Fred was a long-standing contributor to GDB and to Free
Computer Laboratory under DARPA/AFRL contract FA8750-10-C-0237
("CTSRD"), as part of the DARPA CRASH research programme.
+Initial support for the FreeBSD/riscv target and native configuration
+was developed by SRI International and the University of Cambridge
+Computer Laboratory (Department of Computer Science and Technology)
+under DARPA contract HR0011-18-C-0016 ("ECATS"), as part of the DARPA
+SSITH research programme.
+
The original port to the OpenRISC 1000 is believed to be due to
Alessandro Forin and Per Bothner. More recent ports have been the work
of Jeremy Bennett, Franck Jullien, Stefan Wallentowitz and
communicate with @value{GDBN} using it as a back end.
@xref{Interpreters, , Command Interpreters}.
-@samp{--interpreter=mi} (or @samp{--interpreter=mi2}) causes
-@value{GDBN} to use the @dfn{@sc{gdb/mi} interface} (@pxref{GDB/MI, ,
-The @sc{gdb/mi} Interface}) included since @value{GDBN} version 6.0. The
-previous @sc{gdb/mi} interface, included in @value{GDBN} version 5.3 and
-selected with @samp{--interpreter=mi1}, is deprecated. Earlier
-@sc{gdb/mi} interfaces are no longer supported.
+@samp{--interpreter=mi} (or @samp{--interpreter=mi3}) causes
+@value{GDBN} to use the @dfn{@sc{gdb/mi} interface} version 3 (@pxref{GDB/MI, ,
+The @sc{gdb/mi} Interface}) included since @value{GDBN} version 9.1. @sc{gdb/mi}
+version 2 (@code{mi2}), included in @value{GDBN} 6.0 and version 1 (@code{mi1}),
+included in @value{GDBN} 5.3, are also available. Earlier @sc{gdb/mi}
+interfaces are no longer supported.
@item -write
@cindex @code{--write}
the DWARF debugging format, and specify the option @option{-g3}.
@xref{Debugging Options,,Options for Debugging Your Program or GCC,
-gcc.info, Using the @sc{gnu} Compiler Collection (GCC)}, for more
+gcc, Using the @sc{gnu} Compiler Collection (GCC)}, for more
information on @value{NGCC} options affecting debug information.
You will have the best debugging experience if you use the latest
You can also change @value{GDBN}'s current working directory by using
the @code{cd} command.
-@xref{cd command}
+@xref{cd command}.
@kindex show cwd
@cindex show inferior's working directory
The @value{GDBN} working directory serves as a default for the
commands that specify files for @value{GDBN} to operate on.
@xref{Files, ,Commands to Specify Files}.
-@xref{set cwd command}
+@xref{set cwd command}.
@kindex pwd
@item pwd
inferiors}}:
@table @code
-@kindex info inferiors
+@kindex info inferiors [ @var{id}@dots{} ]
@item info inferiors
Print a list of all inferiors currently being managed by @value{GDBN}.
+By default all inferiors are printed, but the argument @var{id}@dots{}
+-- a space separated list of inferior numbers -- can be used to limit
+the display to just the requested inferiors.
@value{GDBN} displays for each inferior (in this order):
@item automatic notification of new threads
@item @samp{thread @var{thread-id}}, a command to switch among threads
@item @samp{info threads}, a command to inquire about existing threads
-@item @samp{thread apply [@var{thread-id-list}] [@var{all}] @var{args}},
+@item @samp{thread apply [@var{thread-id-list} | all] @var{args}},
a command to apply a command to a list of threads
@item thread-specific breakpoints
@item @samp{set print thread-events}, which controls printing of
@kindex thread apply
@cindex apply command to several threads
-@item thread apply [@var{thread-id-list} | all [-ascending]] @var{command}
+@item thread apply [@var{thread-id-list} | all [-ascending]] [@var{flag}]@dots{} @var{command}
The @code{thread apply} command allows you to apply the named
@var{command} to one or more threads. Specify the threads that you
want affected using the thread ID list syntax (@pxref{thread ID
@var{command}}. To apply a command to all threads in ascending order,
type @kbd{thread apply all -ascending @var{command}}.
+The @var{flag} arguments control what output to produce and how to handle
+errors raised when applying @var{command} to a thread. @var{flag}
+must start with a @code{-} directly followed by one letter in
+@code{qcs}. If several flags are provided, they must be given
+individually, such as @code{-c -q}.
+
+By default, @value{GDBN} displays some thread information before the
+output produced by @var{command}, and an error raised during the
+execution of a @var{command} will abort @code{thread apply}. The
+following flags can be used to fine-tune this behavior:
+
+@table @code
+@item -c
+The flag @code{-c}, which stands for @samp{continue}, causes any
+errors in @var{command} to be displayed, and the execution of
+@code{thread apply} then continues.
+@item -s
+The flag @code{-s}, which stands for @samp{silent}, causes any errors
+or empty output produced by a @var{command} to be silently ignored.
+That is, the execution continues, but the thread information and errors
+are not printed.
+@item -q
+The flag @code{-q} (@samp{quiet}) disables printing the thread
+information.
+@end table
+
+Flags @code{-c} and @code{-s} cannot be used together.
+
+@kindex taas
+@cindex apply command to all threads (ignoring errors and empty output)
+@item taas @var{command}
+Shortcut for @code{thread apply all -s @var{command}}.
+Applies @var{command} on all threads, ignoring errors and empty output.
+
+@kindex tfaas
+@cindex apply a command to all frames of all threads (ignoring errors and empty output)
+@item tfaas @var{command}
+Shortcut for @code{thread apply all -s frame apply all -s @var{command}}.
+Applies @var{command} on all frames of all threads, ignoring errors
+and empty output. Note that the flag @code{-s} is specified twice:
+The first @code{-s} ensures that @code{thread apply} only shows the thread
+information of the threads for which @code{frame apply} produces
+some output. The second @code{-s} is needed to ensure that @code{frame
+apply} shows the frame information of a frame only if the
+@var{command} successfully produced some output.
+
+It can for example be used to print a local variable or a function
+argument without knowing the thread or frame where this variable or argument
+is, using:
+@smallexample
+(@value{GDBP}) tfaas p some_local_var_i_do_not_remember_where_it_is
+@end smallexample
+
@kindex thread name
@cindex name a thread
the @code{break} command. You can delete them, disable them, or make
them conditional the same way as any other breakpoint.
+In programs using different languages, @value{GDBN} chooses the syntax
+to print the list of all breakpoints it sets according to the
+@samp{set language} value: using @samp{set language auto}
+(see @ref{Automatically, ,Set Language Automatically}) means to use the
+language of the breakpoint's function, other values mean to use
+the manually specified language (see @ref{Manually, ,Set Language Manually}).
+
The syntax of the regular expression is the standard one used with tools
like @file{grep}. Note that this is different from the syntax used by
shells, so for instance @code{foo*} matches all functions that include
@cindex break on fork/exec
A call to @code{exec}.
+@anchor{catch syscall}
@item syscall
@itemx syscall @r{[}@var{name} @r{|} @var{number} @r{|} @r{group:}@var{groupname} @r{|} @r{g:}@var{groupname}@r{]} @dots{}
@kindex catch syscall
Disable the specified skip(s). If @var{range} is not specified, disable all
skips.
+@kindex set debug skip
+@item set debug skip @r{[}on|off@r{]}
+Set whether to print the debug output about skipping files and functions.
+
+@kindex show debug skip
+@item show debug skip
+Show whether the debug output about skipping files and functions is printed.
+
@end table
@node Signals
If the target doesn't support async mode, @value{GDBN} issues an error
message if you attempt to use the background execution commands.
+@cindex @code{&}, background execution of commands
To specify background execution, add a @code{&} to the command. For example,
the background form of the @code{continue} command is @code{continue&}, or
just @code{c&}. The execution commands that accept background execution
to the live target and not necessarily to the current replay
position.
+@item set record btrace cpu @var{identifier}
+Set the processor to be used for enabling workarounds for processor
+errata when decoding the trace.
+
+Processor errata are defects in processor operation, caused by its
+design or manufacture. They can cause a trace not to match the
+specification. This, in turn, may cause trace decode to fail.
+@value{GDBN} can detect erroneous trace packets and correct them, thus
+avoiding the decoding failures. These corrections are known as
+@dfn{errata workarounds}, and are enabled based on the processor on
+which the trace was recorded.
+
+By default, @value{GDBN} attempts to detect the processor
+automatically, and apply the necessary workarounds for it. However,
+you may need to specify the processor if @value{GDBN} does not yet
+support it. This command allows you to do that, and also allows to
+disable the workarounds.
+
+The argument @var{identifier} identifies the @sc{cpu} and is of the
+form: @code{@var{vendor}:@var{procesor identifier}}. In addition,
+there are two special identifiers, @code{none} and @code{auto}
+(default).
+
+The following vendor identifiers and corresponding processor
+identifiers are currently supported:
+
+@multitable @columnfractions .1 .9
+
+@item @code{intel}
+@tab @var{family}/@var{model}[/@var{stepping}]
+
+@end multitable
+
+On GNU/Linux systems, the processor @var{family}, @var{model}, and
+@var{stepping} can be obtained from @code{/proc/cpuinfo}.
+
+If @var{identifier} is @code{auto}, enable errata workarounds for the
+processor on which the trace was recorded. If @var{identifier} is
+@code{none}, errata workarounds are disabled.
+
+For example, when using an old @value{GDBN} on a new system, decode
+may fail because @value{GDBN} does not support the new processor. It
+often suffices to specify an older processor that @value{GDBN}
+supports.
+
+@smallexample
+(gdb) info record
+Active record target: record-btrace
+Recording format: Intel Processor Trace.
+Buffer size: 16kB.
+Failed to configure the Intel Processor Trace decoder: unknown cpu.
+(gdb) set record btrace cpu intel:6/158
+(gdb) info record
+Active record target: record-btrace
+Recording format: Intel Processor Trace.
+Buffer size: 16kB.
+Recorded 84872 instructions in 3189 functions (0 gaps) for thread 1 (...).
+@end smallexample
+
@kindex show record btrace
@item show record btrace replay-memory-access
Show the current setting of @code{replay-memory-access}.
+@item show record btrace cpu
+Show the processor to be used for enabling trace decode errata
+workarounds.
+
@kindex set record btrace bts
@item set record btrace bts buffer-size @var{size}
@itemx set record btrace bts buffer-size unlimited
* Backtrace:: Backtraces
* Selection:: Selecting a frame
* Frame Info:: Information on a frame
+* Frame Apply:: Applying a command to several frames
* Frame Filter Management:: Managing frame filters
@end menu
in a register called the @dfn{frame pointer register}
(@pxref{Registers, $fp}) while execution is going on in that frame.
+@cindex frame level
@cindex frame number
-@value{GDBN} assigns numbers to all existing stack frames, starting with
-zero for the innermost frame, one for the frame that called it,
-and so on upward. These numbers do not really exist in your program;
-they are assigned by @value{GDBN} to give you a way of designating stack
-frames in @value{GDBN} commands.
+@value{GDBN} labels each existing stack frame with a @dfn{level}, a
+number that is zero for the innermost frame, one for the frame that
+called it, and so on upward. These level numbers give you a way of
+designating stack frames in @value{GDBN} commands. The terms
+@dfn{frame number} and @dfn{frame level} can be used interchangeably to
+describe this number.
@c The -fomit-frame-pointer below perennially causes hbox overflow
@c underflow problems.
stack.
@anchor{backtrace-command}
-@table @code
@kindex backtrace
@kindex bt @r{(@code{backtrace})}
-@item backtrace
-@itemx bt
-Print a backtrace of the entire stack: one line per frame for all
-frames in the stack.
-
-You can stop the backtrace at any time by typing the system interrupt
-character, normally @kbd{Ctrl-c}.
-
-@item backtrace @var{n}
-@itemx bt @var{n}
-Similar, but print only the innermost @var{n} frames.
-
-@item backtrace -@var{n}
-@itemx bt -@var{n}
-Similar, but print only the outermost @var{n} frames.
-
-@item backtrace full
-@itemx bt full
-@itemx bt full @var{n}
-@itemx bt full -@var{n}
-Print the values of the local variables also. As described above,
-@var{n} specifies the number of frames to print.
-
-@item backtrace no-filters
-@itemx bt no-filters
-@itemx bt no-filters @var{n}
-@itemx bt no-filters -@var{n}
-@itemx bt no-filters full
-@itemx bt no-filters full @var{n}
-@itemx bt no-filters full -@var{n}
+To print a backtrace of the entire stack, use the @code{backtrace}
+command, or its alias @code{bt}. This command will print one line per
+frame for frames in the stack. By default, all stack frames are
+printed. You can stop the backtrace at any time by typing the system
+interrupt character, normally @kbd{Ctrl-c}.
+
+@table @code
+@item backtrace [@var{args}@dots{}]
+@itemx bt [@var{args}@dots{}]
+Print the backtrace of the entire stack. The optional @var{args} can
+be one of the following:
+
+@table @code
+@item @var{n}
+@itemx @var{n}
+Print only the innermost @var{n} frames, where @var{n} is a positive
+number.
+
+@item -@var{n}
+@itemx -@var{n}
+Print only the outermost @var{n} frames, where @var{n} is a positive
+number.
+
+@item full
+Print the values of the local variables also. This can be combined
+with a number to limit the number of frames shown.
+
+@item no-filters
Do not run Python frame filters on this backtrace. @xref{Frame
Filter API}, for more information. Additionally use @ref{disable
frame-filter all} to turn off all frame filters. This is only
relevant when @value{GDBN} has been configured with @code{Python}
support.
+
+@item hide
+A Python frame filter might decide to ``elide'' some frames. Normally
+such elided frames are still printed, but they are indented relative
+to the filtered frames that cause them to be elided. The @code{hide}
+option causes elided frames to not be printed at all.
+@end table
@end table
@kindex where
@table @code
@kindex frame@r{, selecting}
@kindex f @r{(@code{frame})}
-@item frame @var{n}
-@itemx f @var{n}
-Select frame number @var{n}. Recall that frame zero is the innermost
+@item frame @r{[} @var{frame-selection-spec} @r{]}
+@item f @r{[} @var{frame-selection-spec} @r{]}
+The @command{frame} command allows different stack frames to be
+selected. The @var{frame-selection-spec} can be any of the following:
+
+@table @code
+@kindex frame level
+@item @var{num}
+@item level @var{num}
+Select frame level @var{num}. Recall that frame zero is the innermost
(currently executing) frame, frame one is the frame that called the
-innermost one, and so on. The highest-numbered frame is the one for
-@code{main}.
+innermost one, and so on. The highest level frame is usually the one
+for @code{main}.
+
+As this is the most common method of navigating the frame stack, the
+string @command{level} can be omitted. For example, the following two
+commands are equivalent:
+
+@smallexample
+(@value{GDBP}) frame 3
+(@value{GDBP}) frame level 3
+@end smallexample
+
+@kindex frame address
+@item address @var{stack-address}
+Select the frame with stack address @var{stack-address}. The
+@var{stack-address} for a frame can be seen in the output of
+@command{info frame}, for example:
+
+@smallexample
+(gdb) info frame
+Stack level 1, frame at 0x7fffffffda30:
+ rip = 0x40066d in b (amd64-entry-value.cc:59); saved rip 0x4004c5
+ tail call frame, caller of frame at 0x7fffffffda30
+ source language c++.
+ Arglist at unknown address.
+ Locals at unknown address, Previous frame's sp is 0x7fffffffda30
+@end smallexample
+
+The @var{stack-address} for this frame is @code{0x7fffffffda30} as
+indicated by the line:
+
+@smallexample
+Stack level 1, frame at 0x7fffffffda30:
+@end smallexample
+
+@kindex frame function
+@item function @var{function-name}
+Select the stack frame for function @var{function-name}. If there are
+multiple stack frames for function @var{function-name} then the inner
+most stack frame is selected.
+
+@kindex frame view
+@item view @var{stack-address} @r{[} @var{pc-addr} @r{]}
+View a frame that is not part of @value{GDBN}'s backtrace. The frame
+viewed has stack address @var{stack-addr}, and optionally, a program
+counter address of @var{pc-addr}.
-@item frame @var{stack-addr} [ @var{pc-addr} ]
-@itemx f @var{stack-addr} [ @var{pc-addr} ]
-Select the frame at address @var{stack-addr}. This is useful mainly if the
-chaining of stack frames has been damaged by a bug, making it
-impossible for @value{GDBN} to assign numbers properly to all frames. In
-addition, this can be useful when your program has multiple stacks and
-switches between them. The optional @var{pc-addr} can also be given to
-specify the value of PC for the stack frame.
+This is useful mainly if the chaining of stack frames has been
+damaged by a bug, making it impossible for @value{GDBN} to assign
+numbers properly to all frames. In addition, this can be useful
+when your program has multiple stacks and switches between them.
+
+When viewing a frame outside the current backtrace using
+@command{frame view} then you can always return to the original
+stack using one of the previous stack frame selection instructions,
+for example @command{frame level 0}.
+
+@end table
@kindex up
@item up @var{n}
@table @code
@kindex select-frame
-@item select-frame
+@item select-frame @r{[} @var{frame-selection-spec} @r{]}
The @code{select-frame} command is a variant of @code{frame} that does
not display the new frame after selecting it. This command is
intended primarily for use in @value{GDBN} command scripts, where the
-output might be unnecessary and distracting.
+output might be unnecessary and distracting. The
+@var{frame-selection-spec} is as for the @command{frame} command
+described in @ref{Selection, ,Selecting a Frame}.
@kindex down-silently
@kindex up-silently
something has gone wrong that has made the stack format fail to fit
the usual conventions.
-@item info frame @var{addr}
-@itemx info f @var{addr}
-Print a verbose description of the frame at address @var{addr}, without
-selecting that frame. The selected frame remains unchanged by this
-command. This requires the same kind of address (more than one for some
-architectures) that you specify in the @code{frame} command.
-@xref{Selection, ,Selecting a Frame}.
+@item info frame @r{[} @var{frame-selection-spec} @r{]}
+@itemx info f @r{[} @var{frame-selection-spec} @r{]}
+Print a verbose description of the frame selected by
+@var{frame-selection-spec}. The @var{frame-selection-spec} is the
+same as for the @command{frame} command (@pxref{Selection, ,Selecting
+a Frame}). The selected frame remains unchanged by this command.
@kindex info args
-@item info args
+@item info args [-q]
Print the arguments of the selected frame, each on a separate line.
-@item info locals
+The optional flag @samp{-q}, which stands for @samp{quiet}, disables
+printing header information and messages explaining why no argument
+have been printed.
+
+@item info args [-q] [-t @var{type_regexp}] [@var{regexp}]
+Like @kbd{info args}, but only print the arguments selected
+with the provided regexp(s).
+
+If @var{regexp} is provided, print only the arguments whose names
+match the regular expression @var{regexp}.
+
+If @var{type_regexp} is provided, print only the arguments whose
+types, as printed by the @code{whatis} command, match
+the regular expression @var{type_regexp}.
+If @var{type_regexp} contains space(s), it should be enclosed in
+quote characters. If needed, use backslash to escape the meaning
+of special characters or quotes.
+
+If both @var{regexp} and @var{type_regexp} are provided, an argument
+is printed only if its name matches @var{regexp} and its type matches
+@var{type_regexp}.
+
+@item info locals [-q]
@kindex info locals
Print the local variables of the selected frame, each on a separate
line. These are all variables (declared either static or automatic)
accessible at the point of execution of the selected frame.
+The optional flag @samp{-q}, which stands for @samp{quiet}, disables
+printing header information and messages explaining why no local variables
+have been printed.
+
+@item info locals [-q] [-t @var{type_regexp}] [@var{regexp}]
+Like @kbd{info locals}, but only print the local variables selected
+with the provided regexp(s).
+
+If @var{regexp} is provided, print only the local variables whose names
+match the regular expression @var{regexp}.
+
+If @var{type_regexp} is provided, print only the local variables whose
+types, as printed by the @code{whatis} command, match
+the regular expression @var{type_regexp}.
+If @var{type_regexp} contains space(s), it should be enclosed in
+quote characters. If needed, use backslash to escape the meaning
+of special characters or quotes.
+
+If both @var{regexp} and @var{type_regexp} are provided, a local variable
+is printed only if its name matches @var{regexp} and its type matches
+@var{type_regexp}.
+
+The command @kbd{info locals -q -t @var{type_regexp}} can usefully be
+combined with the commands @kbd{frame apply} and @kbd{thread apply}.
+For example, your program might use Resource Acquisition Is
+Initialization types (RAII) such as @code{lock_something_t}: each
+local variable of type @code{lock_something_t} automatically places a
+lock that is destroyed when the variable goes out of scope. You can
+then list all acquired locks in your program by doing
+@smallexample
+thread apply all -s frame apply all -s info locals -q -t lock_something_t
+@end smallexample
+@noindent
+or the equivalent shorter form
+@smallexample
+tfaas i lo -q -t lock_something_t
+@end smallexample
+
+@end table
+
+@node Frame Apply
+@section Applying a Command to Several Frames.
+@kindex frame apply
+@cindex apply command to several frames
+@table @code
+@item frame apply [all | @var{count} | @var{-count} | level @var{level}@dots{}] [@var{flag}]@dots{} @var{command}
+The @code{frame apply} command allows you to apply the named
+@var{command} to one or more frames.
+
+@table @code
+@item @code{all}
+Specify @code{all} to apply @var{command} to all frames.
+
+@item @var{count}
+Use @var{count} to apply @var{command} to the innermost @var{count}
+frames, where @var{count} is a positive number.
+
+@item @var{-count}
+Use @var{-count} to apply @var{command} to the outermost @var{count}
+frames, where @var{count} is a positive number.
+
+@item @code{level}
+Use @code{level} to apply @var{command} to the set of frames identified
+by the @var{level} list. @var{level} is a frame level or a range of frame
+levels as @var{level1}-@var{level2}. The frame level is the number shown
+in the first field of the @samp{backtrace} command output.
+E.g., @samp{2-4 6-8 3} indicates to apply @var{command} for the frames
+at levels 2, 3, 4, 6, 7, 8, and then again on frame at level 3.
+
+@end table
+
+@end table
+
+Note that the frames on which @code{frame apply} applies a command are
+also influenced by the @code{set backtrace} settings such as @code{set
+backtrace past-main} and @code{set backtrace limit N}. See
+@xref{Backtrace,,Backtraces}.
+
+The @var{flag} arguments control what output to produce and how to handle
+errors raised when applying @var{command} to a frame. @var{flag}
+must start with a @code{-} directly followed by one letter in
+@code{qcs}. If several flags are provided, they must be given
+individually, such as @code{-c -q}.
+
+By default, @value{GDBN} displays some frame information before the
+output produced by @var{command}, and an error raised during the
+execution of a @var{command} will abort @code{frame apply}. The
+following flags can be used to fine-tune this behavior:
+
+@table @code
+@item -c
+The flag @code{-c}, which stands for @samp{continue}, causes any
+errors in @var{command} to be displayed, and the execution of
+@code{frame apply} then continues.
+@item -s
+The flag @code{-s}, which stands for @samp{silent}, causes any errors
+or empty output produced by a @var{command} to be silently ignored.
+That is, the execution continues, but the frame information and errors
+are not printed.
+@item -q
+The flag @code{-q} (@samp{quiet}) disables printing the frame
+information.
+@end table
+
+The following example shows how the flags @code{-c} and @code{-s} are
+working when applying the command @code{p j} to all frames, where
+variable @code{j} can only be successfully printed in the outermost
+@code{#1 main} frame.
+
+@smallexample
+@group
+(gdb) frame apply all p j
+#0 some_function (i=5) at fun.c:4
+No symbol "j" in current context.
+(gdb) frame apply all -c p j
+#0 some_function (i=5) at fun.c:4
+No symbol "j" in current context.
+#1 0x565555fb in main (argc=1, argv=0xffffd2c4) at fun.c:11
+$1 = 5
+(gdb) frame apply all -s p j
+#1 0x565555fb in main (argc=1, argv=0xffffd2c4) at fun.c:11
+$2 = 5
+(gdb)
+@end group
+@end smallexample
+
+By default, @samp{frame apply}, prints the frame location
+information before the command output:
+
+@smallexample
+@group
+(gdb) frame apply all p $sp
+#0 some_function (i=5) at fun.c:4
+$4 = (void *) 0xffffd1e0
+#1 0x565555fb in main (argc=1, argv=0xffffd2c4) at fun.c:11
+$5 = (void *) 0xffffd1f0
+(gdb)
+@end group
+@end smallexample
+
+If flag @code{-q} is given, no frame information is printed:
+@smallexample
+@group
+(gdb) frame apply all -q p $sp
+$12 = (void *) 0xffffd1e0
+$13 = (void *) 0xffffd1f0
+(gdb)
+@end group
+@end smallexample
+
+@table @code
+
+@kindex faas
+@cindex apply a command to all frames (ignoring errors and empty output)
+@item faas @var{command}
+Shortcut for @code{frame apply all -s @var{command}}.
+Applies @var{command} on all frames, ignoring errors and empty output.
+
+It can for example be used to print a local variable or a function
+argument without knowing the frame where this variable or argument
+is, using:
+@smallexample
+(@value{GDBP}) faas p some_local_var_i_do_not_remember_where_it_is
+@end smallexample
+
+Note that the command @code{tfaas @var{command}} applies @var{command}
+on all frames of all threads. See @xref{Threads,,Threads}.
@end table
+
@node Frame Filter Management
@section Management of Frame Filters.
@cindex managing frame filters
@table @code
@kindex info line
-@item info line @var{location}
+@item info line
+@itemx info line @var{location}
Print the starting and ending addresses of the compiled code for
source line @var{location}. You can specify source lines in any of
-the ways documented in @ref{Specify Location}.
+the ways documented in @ref{Specify Location}. With no @var{location}
+information about the current source line is printed.
@end table
For example, we can use @code{info line} to discover the location of
the object code for the first line of function
@code{m4_changequote}:
-@c FIXME: I think this example should also show the addresses in
-@c symbolic form, as they usually would be displayed.
@smallexample
(@value{GDBP}) info line m4_changequote
-Line 895 of "builtin.c" starts at pc 0x634c and ends at 0x6350.
+Line 895 of "builtin.c" starts at pc 0x634c <m4_changequote> and \
+ ends at 0x6350 <m4_changequote+4>.
@end smallexample
@noindent
@var{location}) what source line covers a particular address:
@smallexample
(@value{GDBP}) info line *0x63ff
-Line 926 of "builtin.c" starts at pc 0x63e4 and ends at 0x6404.
+Line 926 of "builtin.c" starts at pc 0x63e4 <m4_changequote+152> and \
+ ends at 0x6404 <m4_changequote+184>.
@end smallexample
@cindex @code{$_} and @code{info line}
convenience variable @code{$_} (@pxref{Convenience Vars, ,Convenience
Variables}).
+@cindex info line, repeated calls
+After @code{info line}, using @code{info line} again without
+specifying a location will display information about the next source
+line.
+
@table @code
@kindex disassemble
@cindex assembly instructions
the disassembler. For a list of valid options, please refer to the
@code{-M}/@code{--disassembler-options} section of the @samp{objdump}
manual and/or the output of @kbd{objdump --help}
-(@pxref{objdump,,objdump,binutils.info,The GNU Binary Utilities}).
+(@pxref{objdump,,objdump,binutils,The GNU Binary Utilities}).
The default value is the empty string.
If it is necessary to specify more than one disassembler option, then
multiple options can be placed together into a comma separated list.
-Currently this command is only supported on targets ARM, PowerPC
+Currently this command is only supported on targets ARM, MIPS, PowerPC
and S/390.
@kindex show disassembler-options
@cindex symbol decoding style, C@t{++}
@kindex set demangle-style
@item set demangle-style @var{style}
-Choose among several encoding schemes used by different compilers to
-represent C@t{++} names. The choices for @var{style} are currently:
-
-@table @code
-@item auto
-Allow @value{GDBN} to choose a decoding style by inspecting your program.
-This is the default.
-
-@item gnu
-Decode based on the @sc{gnu} C@t{++} compiler (@code{g++}) encoding algorithm.
-
-@item hp
-Decode based on the HP ANSI C@t{++} (@code{aCC}) encoding algorithm.
-
-@item lucid
-Decode based on the Lucid C@t{++} compiler (@code{lcc}) encoding algorithm.
-
-@item arm
-Decode using the algorithm in the @cite{C@t{++} Annotated Reference Manual}.
-@strong{Warning:} this setting alone is not sufficient to allow
-debugging @code{cfront}-generated executables. @value{GDBN} would
-require further enhancement to permit that.
-
-@end table
-If you omit @var{style}, you will see a list of possible formats.
+Choose among several encoding schemes used by different compilers to represent
+C@t{++} names. If you omit @var{style}, you will see a list of possible
+formats. The default value is @var{auto}, which lets @value{GDBN} choose a
+decoding style by inspecting your program.
@item show demangle-style
Display the encoding style currently in use for decoding C@t{++} symbols.
bar
bar1
bar2
-(gdb) disable pretty-printer library2 bar:bar1
+(gdb) disable pretty-printer library2 bar;bar1
1 printer disabled
1 of 3 printers enabled
(gdb) info pretty-printer library2
@vindex $_tlb@r{, convenience variable}
The variable @code{$_tlb} is automatically set when debugging
applications running on MS-Windows in native mode or connected to
-gdbserver that supports the @code{qGetTIBAddr} request.
+gdbserver that supports the @code{qGetTIBAddr} request.
@xref{General Query Packets}.
This variable contains the address of the thread information block.
@item $_gthread
The global number of the current thread. @xref{global thread numbers}.
+@item $_gdb_major
+@itemx $_gdb_minor
+@vindex $_gdb_major@r{, convenience variable}
+@vindex $_gdb_minor@r{, convenience variable}
+The major and minor version numbers of the running @value{GDBN}.
+Development snapshots and pretest versions have their minor version
+incremented by one; thus, @value{GDBN} pretest 9.11.90 will produce
+the value 12 for @code{$_gdb_minor}. These variables allow you to
+write scripts that work with different versions of @value{GDBN}
+without errors caused by features unavailable in some of those
+versions.
@end table
@node Convenience Funs
* Ada Tasks and Core Files:: Tasking Support when Debugging Core Files
* Ravenscar Profile:: Tasking Support when using the Ravenscar
Profile
+* Ada Settings:: New settable GDB parameters for Ada.
* Ada Glitches:: Known peculiarities of Ada mode.
@end menu
(@value{GDBP}) info task 2
Ada Task: 0x807c468
Name: task_1
-Thread: 0x807f378
+Thread: 0
+LWP: 0x1fac
Parent: 1 (main_task)
Base Priority: 15
State: Runnable
@end table
+@node Ada Settings
+@subsubsection Ada Settings
+@cindex Ada settings
+
+@table @code
+@kindex set varsize-limit
+@item set varsize-limit @var{size}
+Prevent @value{GDBN} from attempting to evaluate objects whose size
+is above the given limit (@var{size}) when those sizes are computed
+from run-time quantities. This is typically the case when the object
+has a variable size, such as an array whose bounds are not known at
+compile time for example. Setting @var{size} to @code{unlimited}
+removes the size limitation. By default, the limit is about 65KB.
+
+The purpose of having such a limit is to prevent @value{GDBN} from
+trying to grab enormous chunks of virtual memory when asked to evaluate
+a quantity whose bounds have been corrupted or have not yet been fully
+initialized. The limit applies to the results of some subexpressions
+as well as to complete expressions. For example, an expression denoting
+a simple integer component, such as @code{x.y.z}, may fail if the size of
+@code{x.y} is variable and exceeds @code{size}. On the other hand,
+@value{GDBN} is sometimes clever; the expression @code{A(i)}, where
+@code{A} is an array variable with non-constant size, will generally
+succeed regardless of the bounds on @code{A}, as long as the component
+size is less than @var{size}.
+
+@kindex show varsize-limit
+@item show varsize-limit
+Show the limit on types whose size is determined by run-time quantities.
+@end table
+
@node Ada Glitches
@subsubsection Known Peculiarities of Ada Mode
@cindex Ada, problems
@samp{i type ^value$} gives information only on types whose complete
name is @code{value}.
+In programs using different languages, @value{GDBN} chooses the syntax
+to print the type description according to the
+@samp{set language} value: using @samp{set language auto}
+(see @ref{Automatically, ,Set Language Automatically}) means to use the
+language of the type, other values mean to use
+the manually specified language (see @ref{Manually, ,Set Language Manually}).
+
This command differs from @code{ptype} in two ways: first, like
@code{whatis}, it does not print a detailed description; second, it
-lists all source files where a type is defined.
+lists all source files and line numbers where a type is defined.
@kindex info type-printers
@item info type-printers
have already been read, and files whose symbols will be read when needed.
@kindex info functions
-@item info functions
+@item info functions [-q]
Print the names and data types of all defined functions.
-
-@item info functions @var{regexp}
-Print the names and data types of all defined functions
-whose names contain a match for regular expression @var{regexp}.
-Thus, @samp{info fun step} finds all functions whose names
-include @code{step}; @samp{info fun ^step} finds those whose names
-start with @code{step}. If a function name contains characters
-that conflict with the regular expression language (e.g.@:
+Similarly to @samp{info types}, this command groups its output by source
+files and annotates each function definition with its source line
+number.
+
+In programs using different languages, @value{GDBN} chooses the syntax
+to print the function name and type according to the
+@samp{set language} value: using @samp{set language auto}
+(see @ref{Automatically, ,Set Language Automatically}) means to use the
+language of the function, other values mean to use
+the manually specified language (see @ref{Manually, ,Set Language Manually}).
+
+The optional flag @samp{-q}, which stands for @samp{quiet}, disables
+printing header information and messages explaining why no functions
+have been printed.
+
+@item info functions [-q] [-t @var{type_regexp}] [@var{regexp}]
+Like @samp{info functions}, but only print the names and data types
+of the functions selected with the provided regexp(s).
+
+If @var{regexp} is provided, print only the functions whose names
+match the regular expression @var{regexp}.
+Thus, @samp{info fun step} finds all functions whose
+names include @code{step}; @samp{info fun ^step} finds those whose names
+start with @code{step}. If a function name contains characters that
+conflict with the regular expression language (e.g.@:
@samp{operator*()}), they may be quoted with a backslash.
+If @var{type_regexp} is provided, print only the functions whose
+types, as printed by the @code{whatis} command, match
+the regular expression @var{type_regexp}.
+If @var{type_regexp} contains space(s), it should be enclosed in
+quote characters. If needed, use backslash to escape the meaning
+of special characters or quotes.
+Thus, @samp{info fun -t '^int ('} finds the functions that return
+an integer; @samp{info fun -t '(.*int.*'} finds the functions that
+have an argument type containing int; @samp{info fun -t '^int (' ^step}
+finds the functions whose names start with @code{step} and that return
+int.
+
+If both @var{regexp} and @var{type_regexp} are provided, a function
+is printed only if its name matches @var{regexp} and its type matches
+@var{type_regexp}.
+
+
@kindex info variables
-@item info variables
+@item info variables [-q]
Print the names and data types of all variables that are defined
outside of functions (i.e.@: excluding local variables).
-
-@item info variables @var{regexp}
-Print the names and data types of all variables (except for local
-variables) whose names contain a match for regular expression
-@var{regexp}.
+The printed variables are grouped by source files and annotated with
+their respective source line numbers.
+
+In programs using different languages, @value{GDBN} chooses the syntax
+to print the variable name and type according to the
+@samp{set language} value: using @samp{set language auto}
+(see @ref{Automatically, ,Set Language Automatically}) means to use the
+language of the variable, other values mean to use
+the manually specified language (see @ref{Manually, ,Set Language Manually}).
+
+The optional flag @samp{-q}, which stands for @samp{quiet}, disables
+printing header information and messages explaining why no variables
+have been printed.
+
+@item info variables [-q] [-t @var{type_regexp}] [@var{regexp}]
+Like @kbd{info variables}, but only print the variables selected
+with the provided regexp(s).
+
+If @var{regexp} is provided, print only the variables whose names
+match the regular expression @var{regexp}.
+
+If @var{type_regexp} is provided, print only the variables whose
+types, as printed by the @code{whatis} command, match
+the regular expression @var{type_regexp}.
+If @var{type_regexp} contains space(s), it should be enclosed in
+quote characters. If needed, use backslash to escape the meaning
+of special characters or quotes.
+
+If both @var{regexp} and @var{type_regexp} are provided, an argument
+is printed only if its name matches @var{regexp} and its type matches
+@var{type_regexp}.
@kindex info classes
@cindex Objective-C, classes and selectors
@item show debug compile
Displays the current state of displaying @value{GDBN} process of
compiling and injecting the code.
+
+@anchor{set debug compile-cplus-types}
+@item set debug compile-cplus-types
+@cindex compile C@t{++} type conversion
+Turns on or off the display of C@t{++} type conversion debugging information.
+The default is off.
+
+@item show debug compile-cplus-types
+Displays the current state of displaying debugging information for
+C@t{++} type conversion.
@end table
@subsection Compilation options for the @code{compile} command
discard information on the executable file.
@kindex symbol-file
-@item symbol-file @r{[} @var{filename} @r{]}
+@item symbol-file @r{[} @var{filename} @r{[} -o @var{offset} @r{]]}
Read symbol table information from file @var{filename}. @code{PATH} is
searched when necessary. Use the @code{file} command to get both symbol
table and program to run from the same file.
+If an optional @var{offset} is specified, it is added to the start
+address of each section in the symbol file. This is useful if the
+program is relocated at runtime, such as the Linux kernel with kASLR
+enabled.
+
@code{symbol-file} with no argument clears out @value{GDBN} information on your
program's symbol table.
@kindex add-symbol-file
@cindex dynamic linking
-@item add-symbol-file @var{filename} @var{address}
-@itemx add-symbol-file @var{filename} @var{address} @r{[} -readnow @r{|} -readnever @r{]}
-@itemx add-symbol-file @var{filename} @var{address} -s @var{section} @var{address} @dots{}
+@item add-symbol-file @var{filename} @r{[} -readnow @r{|} -readnever @r{]} @r{[} -o @var{offset} @r{]} @r{[} @var{textaddress} @r{]} @r{[} -s @var{section} @var{address} @dots{} @r{]}
The @code{add-symbol-file} command reads additional symbol table
information from the file @var{filename}. You would use this command
when @var{filename} has been dynamically loaded (by some other means)
-into the program that is running. The @var{address} should give the memory
-address at which the file has been loaded; @value{GDBN} cannot figure
-this out for itself. You can additionally specify an arbitrary number
-of @samp{-s @var{section} @var{address}} pairs, to give an explicit
-section name and base address for that section. You can specify any
-@var{address} as an expression.
+into the program that is running. The @var{textaddress} parameter gives
+the memory address at which the file's text section has been loaded.
+You can additionally specify the base address of other sections using
+an arbitrary number of @samp{-s @var{section} @var{address}} pairs.
+If a section is omitted, @value{GDBN} will use its default addresses
+as found in @var{filename}. Any @var{address} or @var{textaddress}
+can be given as an expression.
+
+If an optional @var{offset} is specified, it is added to the start
+address of each section, except those for which the address was
+specified explicitly.
The symbol table of the file @var{filename} is added to the symbol table
originally read with the @code{symbol-file} command. You can use the
only on some operating systems, when using the ELF or PE file formats
for binary files and the @sc{gnu} Binutils.) For more details about
this feature, see the description of the @option{--build-id}
-command-line option in @ref{Options, , Command Line Options, ld.info,
+command-line option in @ref{Options, , Command Line Options, ld,
The GNU Linker}. The debug info file's name is not specified
explicitly by the build ID, but can be computed from the build ID, see
below.
@value{GDBN} provides a way to build an index, which speeds up
startup.
+For convenience, @value{GDBN} comes with a program,
+@command{gdb-add-index}, which can be used to add the index to a
+symbol file. It takes the symbol file as its only argument:
+
+@smallexample
+$ gdb-add-index symfile
+@end smallexample
+
+@xref{gdb-add-index}.
+
+It is also possible to do the work manually. Here is what
+@command{gdb-add-index} does behind the curtains.
+
The index is stored as a section in the symbol file. @value{GDBN} can
write the index to a file, then you can put it into the symbol file
using @command{objcopy}.
for DWARF debugging information, not stabs. And, they do not
currently work for programs using Ada.
+@subsection Automatic symbol index cache
+
+It is possible for @value{GDBN} to automatically save a copy of this index in a
+cache on disk and retrieve it from there when loading the same binary in the
+future. This feature can be turned on with @kbd{set index-cache on}. The
+following commands can be used to tweak the behavior of the index cache.
+
+@table @code
+
+@item set index-cache on
+@itemx set index-cache off
+Enable or disable the use of the symbol index cache.
+
+@item set index-cache directory @var{directory}
+@itemx show index-cache directory
+Set/show the directory where index files will be saved.
+
+The default value for this directory depends on the host platform. On
+most systems, the index is cached in the @file{gdb} subdirectory of
+the directory pointed to by the @env{XDG_CACHE_HOME} environment
+variable, if it is defined, else in the @file{.cache/gdb} subdirectory
+of your home directory. However, on some systems, the default may
+differ according to local convention.
+
+There is no limit on the disk space used by index cache. It is perfectly safe
+to delete the content of that directory to free up disk space.
+
+@item show index-cache stats
+Print the number of cache hits and misses since the launch of @value{GDBN}.
+
+@end table
+
@node Symbol Errors
@section Errors Reading Symbol Files
@end table
+If the @code{set endian auto} mode is in effect and no executable has
+been selected, then the endianness used is the last one chosen either
+by one of the @code{set endian big} and @code{set endian little}
+commands or by inferring from the last executable used. If no
+endianness has been previously chosen, then the default for this mode
+is inferred from the target @value{GDBN} has been built for, and is
+@code{little} if the name of the target CPU has an @code{el} suffix
+and @code{big} otherwise.
+
Note that these commands merely adjust interpretation of symbolic
data on the host, and that they have absolutely no effect on the
target system.
@subsection Remote Connection Commands
@cindex remote connection commands
-@value{GDBN} can communicate with the target over a serial line, or
+@value{GDBN} can communicate with the target over a serial line, a
+local Unix domain socket, or
over an @acronym{IP} network using @acronym{TCP} or @acronym{UDP}. In
each case, @value{GDBN} uses the same protocol for debugging your
program; only the medium carrying the debugging packets varies. The
(@pxref{Remote Configuration, set serial baud}) before the
@code{target} command.
+@item target remote @var{local-socket}
+@itemx target extended-remote @var{local-socket}
+@cindex local socket, @code{target remote}
+@cindex Unix domain socket
+Use @var{local-socket} to communicate with the target. For example,
+to use a local Unix domain socket bound to the file system entry @file{/tmp/gdb-socket0}:
+
+@smallexample
+target remote /tmp/gdb-socket0
+@end smallexample
+
+Note that this command has the same form as the command to connect
+to a serial line. @value{GDBN} will automatically determine which
+kind of file you have specified and will make the appropriate kind
+of connection.
+This feature is not available if the host system does not support
+Unix domain sockets.
+
@item target remote @code{@var{host}:@var{port}}
+@itemx target remote @code{@var{[host]}:@var{port}}
@itemx target remote @code{tcp:@var{host}:@var{port}}
+@itemx target remote @code{tcp:@var{[host]}:@var{port}}
+@itemx target remote @code{tcp4:@var{host}:@var{port}}
+@itemx target remote @code{tcp6:@var{host}:@var{port}}
+@itemx target remote @code{tcp6:@var{[host]}:@var{port}}
@itemx target extended-remote @code{@var{host}:@var{port}}
+@itemx target extended-remote @code{@var{[host]}:@var{port}}
@itemx target extended-remote @code{tcp:@var{host}:@var{port}}
+@itemx target extended-remote @code{tcp:@var{[host]}:@var{port}}
+@itemx target extended-remote @code{tcp4:@var{host}:@var{port}}
+@itemx target extended-remote @code{tcp6:@var{host}:@var{port}}
+@itemx target extended-remote @code{tcp6:@var{[host]}:@var{port}}
@cindex @acronym{TCP} port, @code{target remote}
Debug using a @acronym{TCP} connection to @var{port} on @var{host}.
-The @var{host} may be either a host name or a numeric @acronym{IP}
-address; @var{port} must be a decimal number. The @var{host} could be
-the target machine itself, if it is directly connected to the net, or
-it might be a terminal server which in turn has a serial line to the
-target.
+The @var{host} may be either a host name, a numeric @acronym{IPv4}
+address, or a numeric @acronym{IPv6} address (with or without the
+square brackets to separate the address from the port); @var{port}
+must be a decimal number. The @var{host} could be the target machine
+itself, if it is directly connected to the net, or it might be a
+terminal server which in turn has a serial line to the target.
For example, to connect to port 2828 on a terminal server named
@code{manyfarms}:
target remote manyfarms:2828
@end smallexample
+To connect to port 2828 on a terminal server whose address is
+@code{2001:0db8:85a3:0000:0000:8a2e:0370:7334}, you can either use the
+square bracket syntax:
+
+@smallexample
+target remote [2001:0db8:85a3:0000:0000:8a2e:0370:7334]:2828
+@end smallexample
+
+@noindent
+or explicitly specify the @acronym{IPv6} protocol:
+
+@smallexample
+target remote tcp6:2001:0db8:85a3:0000:0000:8a2e:0370:7334:2828
+@end smallexample
+
+This last example may be confusing to the reader, because there is no
+visible separation between the hostname and the port number.
+Therefore, we recommend the user to provide @acronym{IPv6} addresses
+using square brackets for clarity. However, it is important to
+mention that for @value{GDBN} there is no ambiguity: the number after
+the last colon is considered to be the port number.
+
If your remote target is actually running on the same machine as your
debugger session (e.g.@: a simulator for your target running on the
same host), you can omit the hostname. For example, to connect to
Note that the colon is still required here.
@item target remote @code{udp:@var{host}:@var{port}}
+@itemx target remote @code{udp:@var{[host]}:@var{port}}
+@itemx target remote @code{udp4:@var{host}:@var{port}}
+@itemx target remote @code{udp6:@var{[host]}:@var{port}}
+@itemx target extended-remote @code{udp:@var{host}:@var{port}}
@itemx target extended-remote @code{udp:@var{host}:@var{port}}
+@itemx target extended-remote @code{udp:@var{[host]}:@var{port}}
+@itemx target extended-remote @code{udp4:@var{host}:@var{port}}
+@itemx target extended-remote @code{udp6:@var{host}:@var{port}}
+@itemx target extended-remote @code{udp6:@var{[host]}:@var{port}}
@cindex @acronym{UDP} port, @code{target remote}
Debug using @acronym{UDP} packets to @var{port} on @var{host}. For example, to
connect to @acronym{UDP} port 2828 on a terminal server named @code{manyfarms}:
Record remote serial communications on the named @var{file}. The
default is not to record at all.
-@item show remotelogfile.
+@item show remotelogfile
Show the current setting of the file name on which to record the
serial communications.
@anchor{set remote hardware-breakpoint-limit}
@item set remote hardware-watchpoint-limit @var{limit}
@itemx set remote hardware-breakpoint-limit @var{limit}
-Restrict @value{GDBN} to using @var{limit} remote hardware breakpoint or
-watchpoints. A limit of -1, the default, is treated as unlimited.
+Restrict @value{GDBN} to using @var{limit} remote hardware watchpoints
+or breakpoints. The @var{limit} can be set to 0 to disable hardware
+watchpoints or breakpoints, and @code{unlimited} for unlimited
+watchpoints or breakpoints.
+
+@item show remote hardware-watchpoint-limit
+@itemx show remote hardware-breakpoint-limit
+Show the current limit for the number of hardware watchpoints or
+breakpoints that @value{GDBN} can use.
@cindex limit hardware watchpoints length
@cindex remote target, limit watchpoints length
@anchor{set remote hardware-watchpoint-length-limit}
@item set remote hardware-watchpoint-length-limit @var{limit}
-Restrict @value{GDBN} to using @var{limit} bytes for the maximum length of
-a remote hardware watchpoint. A limit of -1, the default, is treated
-as unlimited.
+Restrict @value{GDBN} to using @var{limit} bytes for the maximum
+length of a remote hardware watchpoint. A @var{limit} of 0 disables
+hardware watchpoints and @code{unlimited} allows watchpoints of any
+length.
@item show remote hardware-watchpoint-length-limit
Show the current limit (in bytes) of the maximum length of
* Cygwin Native:: Features specific to the Cygwin port
* Hurd Native:: Features specific to @sc{gnu} Hurd
* Darwin:: Features specific to Darwin
+* FreeBSD:: Features specific to FreeBSD
@end menu
@node BSD libkvm Interface
@cindex process ID
@item info proc
@itemx info proc @var{process-id}
-Summarize available information about any running process. If a
+Summarize available information about a process. If a
process ID is specified by @var{process-id}, display information about
that process; otherwise display information about the program being
debugged. The summary includes the debugged process ID, the command
Show the name of executable of the process. This command is supported
on @sc{gnu}/Linux and FreeBSD.
+@item info proc files
+@cindex info proc files
+Show the file descriptors open by the process. For each open file
+descriptor, @value{GDBN} shows its number, type (file, directory,
+character device, socket), file pointer offset, and the name of the
+resource open on the descriptor. The resource name can be a file name
+(for files, directories, and devices) or a protocol followed by socket
+address (for network connections). This command is supported on
+FreeBSD.
+
+This example shows the open file descriptors for a process using a
+tty for standard input and output as well as two network sockets:
+
+@smallexample
+(gdb) info proc files 22136
+process 22136
+Open files:
+
+ FD Type Offset Flags Name
+ text file - r-------- /usr/bin/ssh
+ ctty chr - rw------- /dev/pts/20
+ cwd dir - r-------- /usr/home/john
+ root dir - r-------- /
+ 0 chr 0x32933a4 rw------- /dev/pts/20
+ 1 chr 0x32933a4 rw------- /dev/pts/20
+ 2 chr 0x32933a4 rw------- /dev/pts/20
+ 3 socket 0x0 rw----n-- tcp4 10.0.1.2:53014 -> 10.0.1.10:22
+ 4 socket 0x0 rw------- unix stream:/tmp/ssh-FIt89oAzOn5f/agent.2456
+@end smallexample
+
@item info proc mappings
@cindex memory address space mappings
-Report the memory address space ranges accessible in the program. On
+Report the memory address space ranges accessible in a process. On
Solaris and FreeBSD systems, each memory range includes information on
whether the process has read, write, or execute access rights to each
range. On @sc{gnu}/Linux and FreeBSD systems, each memory range
Show the current state of exceptions trapping.
@end table
+@node FreeBSD
+@subsection FreeBSD
+@cindex FreeBSD
+
+When the ABI of a system call is changed in the FreeBSD kernel, this
+is implemented by leaving a compatibility system call using the old
+ABI at the existing number and allocating a new system call number for
+the version using the new ABI. As a convenience, when a system call
+is caught by name (@pxref{catch syscall}), compatibility system calls
+are also caught.
+
+For example, FreeBSD 12 introduced a new variant of the @code{kevent}
+system call and catching the @code{kevent} system call by name catches
+both variants:
+
+@smallexample
+(@value{GDBP}) catch syscall kevent
+Catchpoint 1 (syscalls 'freebsd11_kevent' [363] 'kevent' [560])
+(@value{GDBP})
+@end smallexample
+
@node Embedded OS
@section Embedded Operating Systems
* PowerPC::
* Nios II::
* Sparc64::
+* S12Z::
@end menu
@node AArch64
@end table
+@subsubsection AArch64 SVE.
+@cindex AArch64 SVE.
+
+When @value{GDBN} is debugging the AArch64 architecture, if the Scalable Vector
+Extension (SVE) is present, then @value{GDBN} will provide the vector registers
+@code{$z0} through @code{$z31}, vector predicate registers @code{$p0} through
+@code{$p15}, and the @code{$ffr} register. In addition, the pseudo register
+@code{$vg} will be provided. This is the vector granule for the current thread
+and represents the number of 64-bit chunks in an SVE @code{z} register.
+
+If the vector length changes, then the @code{$vg} register will be updated,
+but the lengths of the @code{z} and @code{p} registers will not change. This
+is a known limitation of @value{GDBN} and does not affect the execution of the
+target process.
+
+
@node i386
@subsection x86 Architecture-specific Issues
@end table
+@node S12Z
+@subsection S12Z
+@cindex S12Z support
+
+When @value{GDBN} is debugging the S12Z architecture,
+it provides the following special command:
+
+@table @code
+@item maint info bdccsr
+@kindex maint info bdccsr@r{, S12Z}
+This command displays the current value of the microprocessor's
+BDCCSR register.
+@end table
+
+
@node Controlling GDB
@chapter Controlling @value{GDBN}
* Editing:: Command editing
* Command History:: Command history
* Screen Size:: Screen size
+* Output Styling:: Output styling
* Numbers:: Numbers
* ABI:: Configuring the current ABI
* Auto-loading:: Automatically loading associated files
Certain commands to @value{GDBN} may produce large amounts of
information output to the screen. To help you read all of it,
@value{GDBN} pauses and asks you for input at the end of each page of
-output. Type @key{RET} when you want to continue the output, or @kbd{q}
-to discard the remaining output. Also, the screen width setting
-determines when to wrap lines of output. Depending on what is being
-printed, @value{GDBN} tries to break the line at a readable place,
-rather than simply letting it overflow onto the following line.
+output. Type @key{RET} when you want to see one more page of output,
+@kbd{q} to discard the remaining output, or @kbd{c} to continue
+without paging for the rest of the current command. Also, the screen
+width setting determines when to wrap lines of output. Depending on
+what is being printed, @value{GDBN} tries to break the line at a
+readable place, rather than simply letting it overflow onto the
+following line.
Normally @value{GDBN} knows the size of the screen from the terminal
driver software. For example, on Unix @value{GDBN} uses the termcap data base
Show the current pagination mode.
@end table
+@node Output Styling
+@section Output Styling
+@cindex styling
+@cindex colors
+
+@kindex set style
+@kindex show style
+@value{GDBN} can style its output on a capable terminal. This is
+enabled by default on most systems, but disabled by default when in
+batch mode (@pxref{Mode Options}). Various style settings are available;
+and styles can also be disabled entirely.
+
+@table @code
+@item set style enabled @samp{on|off}
+Enable or disable all styling. The default is host-dependent, with
+most hosts defaulting to @samp{on}.
+
+@item show style enabled
+Show the current state of styling.
+
+@item set style sources @samp{on|off}
+Enable or disable source code styling. This affects whether source
+code, such as the output of the @code{list} command, is styled. Note
+that source styling only works if styling in general is enabled, and
+if @value{GDBN} was linked with the GNU Source Highlight library. The
+default is @samp{on}.
+
+@item show style sources
+Show the current state of source code styling.
+@end table
+
+Subcommands of @code{set style} control specific forms of styling.
+These subcommands all follow the same pattern: each style-able object
+can be styled with a foreground color, a background color, and an
+intensity.
+
+For example, the style of file names can be controlled using the
+@code{set style filename} group of commands:
+
+@table @code
+@item set style filename background @var{color}
+Set the background to @var{color}. Valid colors are @samp{none}
+(meaning the terminal's default color), @samp{black}, @samp{red},
+@samp{green}, @samp{yellow}, @samp{blue}, @samp{magenta}, @samp{cyan},
+and@samp{white}.
+
+@item set style filename foreground @var{color}
+Set the foreground to @var{color}. Valid colors are @samp{none}
+(meaning the terminal's default color), @samp{black}, @samp{red},
+@samp{green}, @samp{yellow}, @samp{blue}, @samp{magenta}, @samp{cyan},
+and@samp{white}.
+
+@item set style filename intensity @var{value}
+Set the intensity to @var{value}. Valid intensities are @samp{normal}
+(the default), @samp{bold}, and @samp{dim}.
+@end table
+
+The style-able objects are:
+@table @code
+@item filename
+Control the styling of file names. By default, this style's
+foreground color is green.
+
+@item function
+Control the styling of function names. These are managed with the
+@code{set style function} family of commands. By default, this
+style's foreground color is yellow.
+
+@item variable
+Control the styling of variable names. These are managed with the
+@code{set style variable} family of commands. By default, this style's
+foreground color is cyan.
+
+@item address
+Control the styling of addresses. These are managed with the
+@code{set style address} family of commands. By default, this style's
+foreground color is blue.
+@end table
+
@node Numbers
@section Numbers
@cindex number representation
Turns on or off debugging messages from the FreeBSD LWP debug support.
@item show debug fbsd-lwp
Show the current state of FreeBSD LWP debugging messages.
+@item set debug fbsd-nat
+@cindex FreeBSD native target debug messages
+Turns on or off debugging messages from the FreeBSD native target.
+@item show debug fbsd-nat
+Show the current state of FreeBSD native target debugging messages.
@item set debug frame
@cindex frame debugging info
Turns on or off display of @value{GDBN} frame debugging info. The
@item mi
@cindex mi interpreter
-The newest @sc{gdb/mi} interface (currently @code{mi2}). Used primarily
+The newest @sc{gdb/mi} interface (currently @code{mi3}). Used primarily
by programs wishing to use @value{GDBN} as a backend for a debugger GUI
or an IDE. For more information, see @ref{GDB/MI, ,The @sc{gdb/mi}
Interface}.
+@item mi3
+@cindex mi3 interpreter
+The @sc{gdb/mi} interface introduced in @value{GDBN} 9.1.
+
@item mi2
@cindex mi2 interpreter
-The current @sc{gdb/mi} interface.
+The @sc{gdb/mi} interface introduced in @value{GDBN} 6.0.
@item mi1
@cindex mi1 interpreter
-The @sc{gdb/mi} interface included in @value{GDBN} 5.1, 5.2, and 5.3.
+The @sc{gdb/mi} interface introduced in @value{GDBN} 5.1.
@end table
decrease it. The @var{name} parameter can be one of @code{src} (the
source window), @code{cmd} (the command window), @code{asm} (the
disassembly window), or @code{regs} (the register display window).
-
-@item tabset @var{nchars}
-@kindex tabset
-Set the width of tab stops to be @var{nchars} characters. This
-setting affects the display of TAB characters in the source and
-assembly windows.
@end table
@node TUI Configuration
@item bold-standout
Use extra bright or bold and standout mode.
@end table
+
+@item set tui tab-width @var{nchars}
+@kindex set tui tab-width
+@kindex tabset
+Set the width of tab stops to be @var{nchars} characters. This
+setting affects the display of TAB characters in the source and
+assembly windows.
@end table
@node Emacs
The application which takes the MI output and presents the state of the
program being debugged to the user is called a @dfn{front end}.
-Although @sc{gdb/mi} is still incomplete, it is currently being used
-by a variety of front ends to @value{GDBN}. This makes it difficult
-to introduce new functionality without breaking existing usage. This
-section tries to minimize the problems by describing how the protocol
-might change.
+Since @sc{gdb/mi} is used by a variety of front ends to @value{GDBN}, changes
+to the MI interface may break existing usage. This section describes how the
+protocol changes and how to request previous version of the protocol when it
+does.
Some changes in MI need not break a carefully designed front end, and
for these the MI version will remain unchanged. The following is a
@end itemize
If the changes are likely to break front ends, the MI version level
-will be increased by one. This will allow the front end to parse the
-output according to the MI version. Apart from mi0, new versions of
-@value{GDBN} will not support old versions of MI and it will be the
-responsibility of the front end to work with the new one.
+will be increased by one. The new versions of the MI protocol are not compatible
+with the old versions. Old versions of MI remain available, allowing front ends
+to keep using them until they are modified to use the latest MI version.
+
+Since @code{--interpreter=mi} always points to the latest MI version, it is
+recommended that front ends request a specific version of MI when launching
+@value{GDBN} (e.g. @code{--interpreter=mi2}) to make sure they get an
+interpreter with the MI version they expect.
+
+The following table gives a summary of the the released versions of the MI
+interface: the version number, the version of GDB in which it first appeared
+and the breaking changes compared to the previous version.
+
+@multitable @columnfractions .05 .05 .9
+@headitem MI version @tab GDB version @tab Breaking changes
+
+@item
+@center 1
+@tab
+@center 5.1
+@tab
+None
+
+@item
+@center 2
+@tab
+@center 6.0
+@tab
+
+@itemize
+@item
+The @code{-environment-pwd}, @code{-environment-directory} and
+@code{-environment-path} commands now returns values using the MI output
+syntax, rather than CLI output syntax.
+
+@item
+@code{-var-list-children}'s @code{children} result field is now a list, rather
+than a tuple.
+
+@item
+@code{-var-update}'s @code{changelist} result field is now a list, rather than
+a tuple.
+@end itemize
+
+@item
+@center 3
+@tab
+@center 9.1
+@tab
-@c Starting with mi3, add a new command -mi-version that prints the MI
-@c version?
+@itemize
+@item
+The output of information about multi-location breakpoints has changed in the
+responses to the @code{-break-insert} and @code{-break-info} commands, as well
+as in the @code{=breakpoint-created} and @code{=breakpoint-modified} events.
+The multiple locations are now placed in a @code{locations} field, whose value
+is a list.
+@end itemize
+
+@end multitable
+
+If your front end cannot yet migrate to a more recent version of the
+MI protocol, you can nevertheless selectively enable specific features
+available in those recent MI versions, using the following commands:
+
+@table @code
+
+@item -fix-multi-location-breakpoint-output
+Use the output for multi-location breakpoints which was introduced by
+MI 3, even when using MI versions 2 or 1. This command has no
+effect when using MI version 3 or later.
+
+@end table
The best way to avoid unexpected changes in MI that might break your front
end is to make your project known to @value{GDBN} developers and
@table @code
@item number
-The breakpoint number. For a breakpoint that represents one location
-of a multi-location breakpoint, this will be a dotted pair, like
-@samp{1.2}.
+The breakpoint number.
@item type
The type of the breakpoint. For ordinary breakpoints this will be
@item what
Some extra data, the exact contents of which are type-dependent.
+@item locations
+This field is present if the breakpoint has multiple locations. It is also
+exceptionally present if the breakpoint is enabled and has a single, disabled
+location.
+
+The value is a list of locations. The format of a location is decribed below.
+
+@end table
+
+A location in a multi-location breakpoint is represented as a tuple with the
+following fields:
+
+@table @code
+
+@item number
+The location number as a dotted pair, like @samp{1.2}. The first digit is the
+number of the parent breakpoint. The second digit is the number of the
+location within that breakpoint.
+
+@item enabled
+This indicates whether the location is enabled, in which case the
+value is @samp{y}, or disabled, in which case the value is @samp{n}.
+Note that this is not the same as the field @code{enable}.
+
+@item addr
+The address of this location as an hexidecimal number.
+
+@item func
+If known, the function in which the location appears.
+If not known, this field is not present.
+
+@item file
+The name of the source file which contains this location, if known.
+If not known, this field is not present.
+
+@item fullname
+The full file name of the source file which contains this location, if
+known. If not known, this field is not present.
+
+@item line
+The line number at which this location appears, if known.
+If not known, this field is not present.
+
+@item thread-groups
+The thread groups this location is in.
+
@end table
For example, here is what the output of @code{-break-insert}
<- *stopped,reason="breakpoint-hit",disp="keep",bkptno="1",thread-id="0",
frame=@{addr="0x08048564",func="main",
args=[@{name="argc",value="1"@},@{name="argv",value="0xbfc4d4d4"@}],
- file="myprog.c",fullname="/home/nickrob/myprog.c",line="68"@}
+ file="myprog.c",fullname="/home/nickrob/myprog.c",line="68",
+ arch="i386:x86_64"@}
<- (gdb)
-> -exec-continue
<- ^running
*stopped,reason="watchpoint-trigger",wpt=@{number="2",exp="x"@},
value=@{old="-268439212",new="55"@},
frame=@{func="main",args=[],file="recursive2.c",
-fullname="/home/foo/bar/recursive2.c",line="5"@}
+fullname="/home/foo/bar/recursive2.c",line="5",arch="i386:x86_64"@}
(gdb)
@end smallexample
wpt=@{number="5",exp="C"@},value=@{old="-276895068",new="3"@},
frame=@{func="callee4",args=[],
file="../../../devo/gdb/testsuite/gdb.mi/basics.c",
-fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="13"@}
+fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="13",
+arch="i386:x86_64"@}
(gdb)
-exec-continue
^running
frame=@{func="callee3",args=[@{name="strarg",
value="0x11940 \"A string argument.\""@}],
file="../../../devo/gdb/testsuite/gdb.mi/basics.c",
-fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="18"@}
+fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="18",
+arch="i386:x86_64"@}
(gdb)
@end smallexample
value=@{old="-276895068",new="3"@},
frame=@{func="callee4",args=[],
file="../../../devo/gdb/testsuite/gdb.mi/basics.c",
-fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="13"@}
+fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="13",
+arch="i386:x86_64"@}
(gdb)
-break-list
^done,BreakpointTable=@{nr_rows="2",nr_cols="6",
frame=@{func="callee3",args=[@{name="strarg",
value="0x11940 \"A string argument.\""@}],
file="../../../devo/gdb/testsuite/gdb.mi/basics.c",
-fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="18"@}
+fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="18",
+arch="i386:x86_64"@}
(gdb)
-break-list
^done,BreakpointTable=@{nr_rows="1",nr_cols="6",
(gdb)
@end smallexample
+@subheading The @code{-catch-handlers} Command
+@findex -catch-handlers
+
+@subsubheading Synopsis
+
+@smallexample
+ -catch-handlers [ -c @var{condition}] [ -d ] [ -e @var{exception-name} ]
+ [ -t ]
+@end smallexample
+
+Add a catchpoint stopping when Ada exceptions are handled.
+By default, the command stops the program when any Ada exception
+gets handled. But it is also possible, by using some of the
+optional parameters described below, to create more selective
+catchpoints.
+
+The possible optional parameters for this command are:
+
+@table @samp
+@item -c @var{condition}
+Make the catchpoint conditional on @var{condition}.
+@item -d
+Create a disabled catchpoint.
+@item -e @var{exception-name}
+Only stop when @var{exception-name} is handled.
+@item -t
+Create a temporary catchpoint.
+@end table
+
+@subsubheading @value{GDBN} Command
+
+The corresponding @value{GDBN} command is @samp{catch handlers}.
+
+@subsubheading Example
+
+@smallexample
+-catch-handlers -e Constraint_Error
+^done,bkptno="4",bkpt=@{number="4",type="breakpoint",disp="keep",
+enabled="y",addr="0x0000000000402f68",
+what="`Constraint_Error' Ada exception handlers",thread-groups=["i1"],
+times="0",original-location="__gnat_begin_handler"@}
+(gdb)
+@end smallexample
+
@c %%%%%%%%%%%%%%%%%%%%%%%%%%%% SECTION %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@node GDB/MI Program Context
@section @sc{gdb/mi} Program Context
@{id="1",target-id="Thread 0xb7e156b0 (LWP 21254)",
frame=@{level="0",addr="0x0804891f",func="foo",
args=[@{name="i",value="10"@}],
- file="/tmp/a.c",fullname="/tmp/a.c",line="158"@},
+ file="/tmp/a.c",fullname="/tmp/a.c",line="158",arch="i386:x86_64"@},
state="running"@}],
current-thread-id="1"
(gdb)
^done,new-thread-id="3",
frame=@{level="0",func="vprintf",
args=[@{name="format",value="0x8048e9c \"%*s%c %d %c\\n\""@},
-@{name="arg",value="0x2"@}],file="vprintf.c",line="31"@}
+@{name="arg",value="0x2"@}],file="vprintf.c",line="31",arch="i386:x86_64"@}
(gdb)
@end smallexample
@@Hello world
*stopped,reason="breakpoint-hit",disp="keep",bkptno="2",frame=@{
func="foo",args=[],file="hello.c",fullname="/home/foo/bar/hello.c",
-line="13"@}
+line="13",arch="i386:x86_64"@}
(gdb)
@end smallexample
(gdb)
@@hello from foo
*stopped,reason="function-finished",frame=@{func="main",args=[],
-file="hello.c",fullname="/home/foo/bar/hello.c",line="7"@}
+file="hello.c",fullname="/home/foo/bar/hello.c",line="7",arch="i386:x86_64"@}
(gdb)
@end smallexample
(gdb)
*stopped,reason="function-finished",frame=@{addr="0x000107b0",func="foo",
args=[@{name="a",value="1"],@{name="b",value="9"@}@},
-file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
+file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
+arch="i386:x86_64"@},
gdb-result-var="$1",return-value="0"
(gdb)
@end smallexample
(gdb)
111*stopped,signal-name="SIGINT",signal-meaning="Interrupt",
frame=@{addr="0x00010140",func="foo",args=[],file="try.c",
-fullname="/home/foo/bar/try.c",line="13"@}
+fullname="/home/foo/bar/try.c",line="13",arch="i386:x86_64"@}
(gdb)
(gdb)
000*stopped,reason="breakpoint-hit",disp="keep",bkptno="1",
frame=@{func="callee4",args=[],
file="../../../devo/gdb/testsuite/gdb.mi/basics.c",
-fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="8"@}
+fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="8",
+arch="i386:x86_64"@}
(gdb)
205-break-delete
205^done
args=[@{name="strarg",
value="0x11940 \"A string argument.\""@}],
file="../../../devo/gdb/testsuite/gdb.mi/basics.c",
-fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="18"@}
+fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="18",
+arch="i386:x86_64"@}
(gdb)
@end smallexample
(gdb)
*stopped,reason="breakpoint-hit",disp="keep",bkptno="1",
frame=@{func="main",args=[],file="recursive2.c",
-fullname="/home/foo/bar/recursive2.c",line="4"@}
+fullname="/home/foo/bar/recursive2.c",line="4",arch="i386:x86_64"@}
(gdb)
@end smallexample
*stopped,reason="end-stepping-range",
frame=@{func="foo",args=[@{name="a",value="10"@},
@{name="b",value="0"@}],file="recursive2.c",
-fullname="/home/foo/bar/recursive2.c",line="11"@}
+fullname="/home/foo/bar/recursive2.c",line="11",arch="i386:x86_64"@}
(gdb)
@end smallexample
(gdb)
*stopped,reason="end-stepping-range",
frame=@{func="foo",args=[],file="try.c",
-fullname="/home/foo/bar/try.c",line="10"@}
+fullname="/home/foo/bar/try.c",line="10",arch="i386:x86_64"@}
(gdb)
-exec-step-instruction
^running
(gdb)
*stopped,reason="end-stepping-range",
frame=@{addr="0x000100f4",func="foo",args=[],file="try.c",
-fullname="/home/foo/bar/try.c",line="10"@}
+fullname="/home/foo/bar/try.c",line="10",arch="i386:x86_64"@}
(gdb)
@end smallexample
(gdb)
x = 55
*stopped,reason="location-reached",frame=@{func="main",args=[],
-file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="6"@}
+file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="6",
+arch="i386:x86_64"@}
(gdb)
@end smallexample
-stack-info-frame
^done,frame=@{level="1",addr="0x0001076c",func="callee3",
file="../../../devo/gdb/testsuite/gdb.mi/basics.c",
-fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="17"@}
+fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="17",
+arch="i386:x86_64"@}
(gdb)
@end smallexample
stack=[
frame=@{level="0",addr="0x00010734",func="callee4",
file="../../../devo/gdb/testsuite/gdb.mi/basics.c",
-fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="8"@},
+fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="8",
+arch="i386:x86_64"@},
frame=@{level="1",addr="0x0001076c",func="callee3",
file="../../../devo/gdb/testsuite/gdb.mi/basics.c",
-fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="17"@},
+fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="17",
+arch="i386:x86_64"@},
frame=@{level="2",addr="0x0001078c",func="callee2",
file="../../../devo/gdb/testsuite/gdb.mi/basics.c",
-fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="22"@},
+fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="22",
+arch="i386:x86_64"@},
frame=@{level="3",addr="0x000107b4",func="callee1",
file="../../../devo/gdb/testsuite/gdb.mi/basics.c",
-fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="27"@},
+fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="27",
+arch="i386:x86_64"@},
frame=@{level="4",addr="0x000107e0",func="main",
file="../../../devo/gdb/testsuite/gdb.mi/basics.c",
-fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="32"@}]
+fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="32",
+arch="i386:x86_64"@}]
(gdb)
-stack-list-arguments 0
^done,
@item @var{from}
The shared library where this function is defined. This is only given
if the frame's function is not known.
+@item @var{arch}
+Frame's architecture.
@end table
If invoked without arguments, this command prints a backtrace for the
-stack-list-frames
^done,stack=
[frame=@{level="0",addr="0x0001076c",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="11"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="11",
+ arch="i386:x86_64"@},
frame=@{level="1",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
+ arch="i386:x86_64"@},
frame=@{level="2",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
+ arch="i386:x86_64"@},
frame=@{level="3",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
+ arch="i386:x86_64"@},
frame=@{level="4",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
+ arch="i386:x86_64"@},
frame=@{level="5",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
+ arch="i386:x86_64"@},
frame=@{level="6",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
+ arch="i386:x86_64"@},
frame=@{level="7",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
+ arch="i386:x86_64"@},
frame=@{level="8",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
+ arch="i386:x86_64"@},
frame=@{level="9",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
+ arch="i386:x86_64"@},
frame=@{level="10",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
+ arch="i386:x86_64"@},
frame=@{level="11",addr="0x00010738",func="main",
- file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="4"@}]
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="4",
+ arch="i386:x86_64"@}]
(gdb)
@end smallexample
-stack-list-frames 3 5
^done,stack=
[frame=@{level="3",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
+ arch="i386:x86_64"@},
frame=@{level="4",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
+ arch="i386:x86_64"@},
frame=@{level="5",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@}]
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
+ arch="i386:x86_64"@}]
(gdb)
@end smallexample
-stack-list-frames 3 3
^done,stack=
[frame=@{level="3",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@}]
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
+ arch="i386:x86_64"@}]
(gdb)
@end smallexample
@smallexample
-data-disassemble
[ -s @var{start-addr} -e @var{end-addr} ]
+ | [ -a @var{addr} ]
| [ -f @var{filename} -l @var{linenum} [ -n @var{lines} ] ]
-- @var{mode}
@end smallexample
is the beginning address (or @code{$pc})
@item @var{end-addr}
is the end address
+@item @var{addr}
+is an address anywhere within (or the name of) the function to
+disassemble. If an address is specified, the whole function
+surrounding that address will be disassembled. If a name is
+specified, the whole function with that name will be disassembled.
@item @var{filename}
is the name of the file to disassemble
@item @var{linenum}
(gdb)
*stopped,reason="breakpoint-hit",disp="keep",bkptno="1",frame=@{
func="main",args=[],file="try.c",fullname="/home/foo/bar/try.c",
-line="5"@}
+line="5",arch="powerpc"@}
(gdb)
-data-list-changed-registers
^done,changed-registers=["0","1","2","4","5","6","7","8","9",
@item exec-run-start-option
Indicates that the @code{-exec-run} command supports the @option{--start}
option (@pxref{GDB/MI Program Execution}).
+@item data-disassemble-a-option
+Indicates that the @code{-data-disassemble} command supports the @option{-a}
+option (@pxref{GDB/MI Data Manipulation}).
@end ftable
@subheading The @code{-list-target-features} Command
frame=@{level="0",addr="0xffffe410",func="__kernel_vsyscall",args=[]@},state="running"@},
@{id="1",target-id="Thread 0xb7e156b0 (LWP 21254)",
frame=@{level="0",addr="0x0804891f",func="foo",args=[@{name="i",value="10"@}],
- file="/tmp/a.c",fullname="/tmp/a.c",line="158"@},state="running"@}]]
+ file="/tmp/a.c",fullname="/tmp/a.c",line="158",arch="i386:x86_64"@},state="running"@}]]
-list-thread-groups --available
^done,groups=[@{id="17",type="process",pid="yyy",num_children="2",cores=[1,2]@}]
-list-thread-groups --available --recurse 1
*stopped,reason="breakpoint-hit",disp="keep",bkptno="1",thread-id="0",
frame=@{addr="0x080484ed",func="main",args=[@{name="argc",value="1"@},
@{name="argv",value="0xbfb60364"@}],file="myprog.c",
-fullname="/home/nickrob/myprog.c",line="73"@}
+fullname="/home/nickrob/myprog.c",line="73",arch="i386:x86_64"@}
(gdb)
@end smallexample
@heading Tools/Packages Necessary for Building @value{GDBN}
@table @asis
-@item ISO C90 compiler
-@value{GDBN} is written in ISO C90. It should be buildable with any
-working C90 compiler, e.g.@: GCC.
+@item C@t{++}11 compiler
+@value{GDBN} is written in C@t{++}11. It should be buildable with any
+recent C@t{++}11 compiler, e.g.@: GCC.
+@item GNU make
+@value{GDBN}'s build system relies on features only found in the GNU
+make program. Other variants of @code{make} will not work.
@end table
@heading Tools/Packages Optional for Building @value{GDBN}
@pxref{Branch Trace Configuration Format})
@end itemize
+@item Guile
+@value{GDBN} can be scripted using GNU Guile. @xref{Guile}. By
+default, @value{GDBN} will be compiled if the Guile libraries are
+installed and are found by @file{configure}. You can use the
+@code{--with-guile} option to request Guile, and pass either the Guile
+version number or the file name of the relevant @code{pkg-config}
+program to choose a particular version of Guile.
+
+@item iconv
+@value{GDBN}'s features related to character sets (@pxref{Character
+Sets}) require a functioning @code{iconv} implementation. If you are
+on a GNU system, then this is provided by the GNU C Library. Some
+other systems also provide a working @code{iconv}.
+
+If @value{GDBN} is using the @code{iconv} program which is installed
+in a non-standard place, you will need to tell @value{GDBN} where to
+find it. This is done with @option{--with-iconv-bin} which specifies
+the directory that contains the @code{iconv} program. This program is
+run in order to make a list of the available character sets.
+
+On systems without @code{iconv}, you can install GNU Libiconv. If
+Libiconv is installed in a standard place, @value{GDBN} will
+automatically use it if it is needed. If you have previously
+installed Libiconv in a non-standard place, you can use the
+@option{--with-libiconv-prefix} option to @file{configure}.
+
+@value{GDBN}'s top-level @file{configure} and @file{Makefile} will
+arrange to build Libiconv if a directory named @file{libiconv} appears
+in the top-most source directory. If Libiconv is built this way, and
+if the operating system does not provide a suitable @code{iconv}
+implementation, then the just-built library will automatically be used
+by @value{GDBN}. One easy way to set this up is to download GNU
+Libiconv, unpack it inside the top-level directory of the @value{GDBN}
+source tree, and then rename the directory holding the Libiconv source
+code to @samp{libiconv}.
+
+@item lzma
+@value{GDBN} can support debugging sections that are compressed with
+the LZMA library. @xref{MiniDebugInfo}. If this library is not
+included with your operating system, you can find it in the xz package
+at @url{http://tukaani.org/xz/}. If the LZMA library is available in
+the usual place, then the @file{configure} script will use it
+automatically. If it is installed in an unusual path, you can use the
+@option{--with-lzma-prefix} option to specify its location.
+
@item MPFR
@anchor{MPFR}
@value{GDBN} can use the GNU MPFR multiple-precision floating-point
formats than the host. If GNU MPFR it is not available, @value{GDBN}
will fall back to using host floating-point arithmetic.
+@item Python
+@value{GDBN} can be scripted using Python language. @xref{Python}.
+By default, @value{GDBN} will be compiled if the Python libraries are
+installed and are found by @file{configure}. You can use the
+@code{--with-python} option to request Python, and pass either the
+file name of the relevant @code{python} executable, or the name of the
+directory in which Python is installed, to choose a particular
+installation of Python.
+
@item zlib
@cindex compressed debug sections
@value{GDBN} will use the @samp{zlib} library, if available, to read
The @samp{zlib} library is likely included with your operating system
distribution; if it is not, you can get the latest version from
@url{http://zlib.net}.
-
-@item iconv
-@value{GDBN}'s features related to character sets (@pxref{Character
-Sets}) require a functioning @code{iconv} implementation. If you are
-on a GNU system, then this is provided by the GNU C Library. Some
-other systems also provide a working @code{iconv}.
-
-If @value{GDBN} is using the @code{iconv} program which is installed
-in a non-standard place, you will need to tell @value{GDBN} where to find it.
-This is done with @option{--with-iconv-bin} which specifies the
-directory that contains the @code{iconv} program.
-
-On systems without @code{iconv}, you can install GNU Libiconv. If you
-have previously installed Libiconv, you can use the
-@option{--with-libiconv-prefix} option to configure.
-
-@value{GDBN}'s top-level @file{configure} and @file{Makefile} will
-arrange to build Libiconv if a directory named @file{libiconv} appears
-in the top-most source directory. If Libiconv is built this way, and
-if the operating system does not provide a suitable @code{iconv}
-implementation, then the just-built library will automatically be used
-by @value{GDBN}. One easy way to set this up is to download GNU
-Libiconv, unpack it, and then rename the directory holding the
-Libiconv source code to @samp{libiconv}.
@end table
@node Running Configure
@item gdb-@value{GDBVN}/readline
source for the @sc{gnu} command-line interface
-
-@item gdb-@value{GDBVN}/glob
-source for the @sc{gnu} filename pattern-matching subroutine
-
-@item gdb-@value{GDBVN}/mmalloc
-source for the @sc{gnu} memory-mapped malloc package
@end table
+There may be other subdirectories as well.
+
The simplest way to configure and build @value{GDBN} is to run @file{configure}
from the @file{gdb-@var{version-number}} source directory, which in
this example is the @file{gdb-@value{GDBVN}} directory.
@smallexample
cd gdb-@value{GDBVN}
-./configure @var{host}
+./configure
make
@end smallexample
-@noindent
-where @var{host} is an identifier such as @samp{sun4} or
-@samp{decstation}, that identifies the platform where @value{GDBN} will run.
-(You can often leave off @var{host}; @file{configure} tries to guess the
-correct value by examining your system.)
-
-Running @samp{configure @var{host}} and then running @code{make} builds the
-@file{bfd}, @file{readline}, @file{mmalloc}, and @file{libiberty}
-libraries, then @code{gdb} itself. The configured source files, and the
-binaries, are left in the corresponding source directories.
+Running @samp{configure} and then running @code{make} builds the
+included supporting libraries, then @code{gdb} itself. The configured
+source files, and the binaries, are left in the corresponding source
+directories.
@need 750
@file{configure} is a Bourne-shell (@code{/bin/sh}) script; if your
shell, you may need to run @code{sh} on it explicitly:
@smallexample
-sh configure @var{host}
+sh configure
@end smallexample
-If you run @file{configure} from a directory that contains source
-directories for multiple libraries or programs, such as the
-@file{gdb-@value{GDBVN}} source directory for version @value{GDBVN},
-@file{configure}
-creates configuration files for every directory level underneath (unless
-you tell it not to, with the @samp{--norecursion} option).
-
You should run the @file{configure} script from the top directory in the
source tree, the @file{gdb-@var{version-number}} directory. If you run
@file{configure} from one of the subdirectories, you will configure only
directories of the @file{gdb} subdirectory. This leads to build errors
about missing include files such as @file{bfd/bfd.h}.
-You can install @code{@value{GDBP}} anywhere; it has no hardwired paths.
-However, you should make sure that the shell on your path (named by
-the @samp{SHELL} environment variable) is publicly readable. Remember
-that @value{GDBN} uses the shell to start your program---some systems refuse to
-let @value{GDBN} debug child processes whose programs are not readable.
+You can install @code{@value{GDBN}} anywhere. The best way to do this
+is to pass the @code{--prefix} option to @code{configure}, and then
+install it with @code{make install}.
@node Separate Objdir
@section Compiling @value{GDBN} in Another Directory
cd gdb-@value{GDBVN}
mkdir ../gdb-sun4
cd ../gdb-sun4
-../gdb-@value{GDBVN}/configure sun4
+../gdb-@value{GDBVN}/configure
make
@end group
@end smallexample
@section @file{configure} Options
Here is a summary of the @file{configure} options and arguments that
-are most often useful for building @value{GDBN}. @file{configure} also has
-several other options not listed here. @inforef{What Configure
-Does,,configure.info}, for a full explanation of @file{configure}.
+are most often useful for building @value{GDBN}. @file{configure}
+also has several other options not listed here. @inforef{Running
+configure scripts,,autoconf.info}, for a full
+explanation of @file{configure}.
@smallexample
configure @r{[}--help@r{]}
@r{[}--prefix=@var{dir}@r{]}
@r{[}--exec-prefix=@var{dir}@r{]}
@r{[}--srcdir=@var{dirname}@r{]}
- @r{[}--norecursion@r{]} @r{[}--rm@r{]}
@r{[}--target=@var{target}@r{]}
- @var{host}
@end smallexample
@noindent
@c avoid splitting the warning from the explanation:
@need 2000
@item --srcdir=@var{dirname}
-@strong{Warning: using this option requires @sc{gnu} @code{make}, or another
-@code{make} that implements the @code{VPATH} feature.}@*
Use this option to make configurations in directories separate from the
@value{GDBN} source directories. Among other things, you can use this to
build (or maintain) several configurations simultaneously, in separate
the working directory in parallel to the source directories below
@var{dirname}.
-@item --norecursion
-Configure only the directory level where @file{configure} is executed; do not
-propagate configuration to subdirectories.
-
@item --target=@var{target}
Configure @value{GDBN} for cross-debugging programs running on the specified
@var{target}. Without this option, @value{GDBN} is configured to debug
programs that run on the same machine (@var{host}) as @value{GDBN} itself.
-There is no convenient way to generate a list of all available targets.
+There is no convenient way to generate a list of all available
+targets. Also see the @code{--enable-targets} option, below.
+@end table
-@item @var{host} @dots{}
-Configure @value{GDBN} to run on the specified @var{host}.
+There are many other options that are specific to @value{GDBN}. This
+lists just the most common ones; there are some very specialized
+options not described here.
-There is no convenient way to generate a list of all available hosts.
-@end table
+@table @code
+@item --enable-targets=@r{[}@var{target}@r{]}@dots{}
+@itemx --enable-targets=all
+Configure @value{GDBN} for cross-debugging programs running on the
+specified list of targets. The special value @samp{all} configures
+@value{GDBN} for debugging programs running on any target it supports.
+
+@item --with-gdb-datadir=@var{path}
+Set the @value{GDBN}-specific data directory. @value{GDBN} will look
+here for certain supporting files or scripts. This defaults to the
+@file{gdb} subdirectory of @samp{datadi} (which can be set using
+@code{--datadir}).
-There are many other options available as well, but they are generally
-needed for special purposes only.
+@item --with-relocated-sources=@var{dir}
+Sets up the default source path substitution rule so that directory
+names recorded in debug information will be automatically adjusted for
+any directory under @var{dir}. @var{dir} should be a subdirectory of
+@value{GDBN}'s configured prefix, the one mentioned in the
+@code{--prefix} or @code{--exec-prefix} options to configure. This
+option is useful if GDB is supposed to be moved to a different place
+after it is built.
+
+@item --enable-64-bit-bfd
+Enable 64-bit support in BFD on 32-bit hosts.
+
+@item --disable-gdbmi
+Build @value{GDBN} without the GDB/MI machine interface
+(@pxref{GDB/MI}).
+
+@item --enable-tui
+Build @value{GDBN} with the text-mode full-screen user interface
+(TUI). Requires a curses library (ncurses and cursesX are also
+supported).
+
+@item --with-curses
+Use the curses library instead of the termcap library, for text-mode
+terminal operations.
+
+@item --with-libunwind-ia64
+Use the libunwind library for unwinding function call stack on ia64
+target platforms. See http://www.nongnu.org/libunwind/index.html for
+details.
+
+@item --with-system-readline
+Use the readline library installed on the host, rather than the
+library supplied as part of @value{GDBN}.
+
+@item --with-system-zlib
+Use the zlib library installed on the host, rather than the library
+supplied as part of @value{GDBN}.
+
+@item --with-expat
+Build @value{GDBN} with Expat, a library for XML parsing. (Done by
+default if libexpat is installed and found at configure time.) This
+library is used to read XML files supplied with @value{GDBN}. If it
+is unavailable, some features, such as remote protocol memory maps,
+target descriptions, and shared library lists, that are based on XML
+files, will not be available in @value{GDBN}. If your host does not
+have libexpat installed, you can get the latest version from
+`http://expat.sourceforge.net'.
+
+@item --with-libiconv-prefix@r{[}=@var{dir}@r{]}
+
+Build @value{GDBN} with GNU libiconv, a character set encoding
+conversion library. This is not done by default, as on GNU systems
+the @code{iconv} that is built in to the C library is sufficient. If
+your host does not have a working @code{iconv}, you can get the latest
+version of GNU iconv from `https://www.gnu.org/software/libiconv/'.
+
+@value{GDBN}'s build system also supports building GNU libiconv as
+part of the overall build. @xref{Requirements}.
+
+@item --with-lzma
+Build @value{GDBN} with LZMA, a compression library. (Done by default
+if liblzma is installed and found at configure time.) LZMA is used by
+@value{GDBN}'s "mini debuginfo" feature, which is only useful on
+platforms using the ELF object file format. If your host does not
+have liblzma installed, you can get the latest version from
+`https://tukaani.org/xz/'.
+
+@item --with-mpfr
+Build @value{GDBN} with GNU MPFR, a library for multiple-precision
+floating-point computation with correct rounding. (Done by default if
+GNU MPFR is installed and found at configure time.) This library is
+used to emulate target floating-point arithmetic during expression
+evaluation when the target uses different floating-point formats than
+the host. If GNU MPFR is not available, @value{GDBN} will fall back
+to using host floating-point arithmetic. If your host does not have
+GNU MPFR installed, you can get the latest version from
+`http://www.mpfr.org'.
+
+@item --with-python@r{[}=@var{python}@r{]}
+Build @value{GDBN} with Python scripting support. (Done by default if
+libpython is present and found at configure time.) Python makes
+@value{GDBN} scripting much more powerful than the restricted CLI
+scripting language. If your host does not have Python installed, you
+can find it on `http://www.python.org/download/'. The oldest version
+of Python supported by GDB is 2.6. The optional argument @var{python}
+is used to find the Python headers and libraries. It can be either
+the name of a Python executable, or the name of the directory in which
+Python is installed.
+
+@item --with-guile[=GUILE]'
+Build @value{GDBN} with GNU Guile scripting support. (Done by default
+if libguile is present and found at configure time.) If your host
+does not have Guile installed, you can find it at
+`https://www.gnu.org/software/guile/'. The optional argument GUILE
+can be a version number, which will cause @code{configure} to try to
+use that version of Guile; or the file name of a @code{pkg-config}
+executable, which will be queried to find the information needed to
+compile and link against Guile.
+
+@item --without-included-regex
+Don't use the regex library included with @value{GDBN} (as part of the
+libiberty library). This is the default on hosts with version 2 of
+the GNU C library.
+
+@item --with-sysroot=@var{dir}
+Use @var{dir} as the default system root directory for libraries whose
+file names begin with @file{/lib}' or @file{/usr/lib'}. (The value of
+@var{dir} can be modified at run time by using the @command{set
+sysroot} command.) If @var{dir} is under the @value{GDBN} configured
+prefix (set with @code{--prefix} or @code{--exec-prefix options}, the
+default system root will be automatically adjusted if and when
+@value{GDBN} is moved to a different location.
+
+@item --with-system-gdbinit=@var{file}
+Configure @value{GDBN} to automatically load a system-wide init file.
+@var{file} should be an absolute file name. If @var{file} is in a
+directory under the configured prefix, and @value{GDBN} is moved to
+another location after being built, the location of the system-wide
+init file will be adjusted accordingly.
+
+@item --enable-build-warnings
+When building the @value{GDBN} sources, ask the compiler to warn about
+any code which looks even vaguely suspicious. It passes many
+different warning flags, depending on the exact version of the
+compiler you are using.
+
+@item --enable-werror
+Treat compiler warnings as werrors. It adds the @code{-Werror} flag
+to the compiler, which will fail the compilation if the compiler
+outputs any warning messages.
+
+@item --enable-ubsan
+Enable the GCC undefined behavior sanitizer. This is disabled by
+default, but passing @code{--enable-ubsan=yes} or
+@code{--enable-ubsan=auto} to @code{configure} will enable it. The
+undefined behavior sanitizer checks for C@t{++} undefined behavior.
+It has a performance cost, so if you are looking at @value{GDBN}'s
+performance, you should disable it. The undefined behavior sanitizer
+was first introduced in GCC 4.9.
+@end table
@node System-wide configuration
@section System-wide configuration and settings
Check that the target descriptions dynamically created by @value{GDBN}
equal the descriptions created from XML files found in @var{dir}.
+@anchor{maint check libthread-db}
+@kindex maint check libthread-db
+@item maint check libthread-db
+Run integrity checks on the current inferior's thread debugging
+library. This exercises all @code{libthread_db} functionality used by
+@value{GDBN} on GNU/Linux systems, and by extension also exercises the
+@code{proc_service} functions provided by @value{GDBN} that
+@code{libthread_db} uses. Note that parts of the test may be skipped
+on some platforms when debugging core files.
+
@kindex maint print dummy-frames
@item maint print dummy-frames
Prints the contents of @value{GDBN}'s internal dummy-frame stack.
memory will be used. Setting it to zero disables caching, which will
slow down @value{GDBN} startup, but reduce memory consumption.
+@kindex maint set dwarf unwinders
+@kindex maint show dwarf unwinders
+@item maint set dwarf unwinders
+@itemx maint show dwarf unwinders
+Control use of the DWARF frame unwinders.
+
+@cindex DWARF frame unwinders
+Many targets that support DWARF debugging use @value{GDBN}'s DWARF
+frame unwinders to build the backtrace. Many of these targets will
+also have a second mechanism for building the backtrace for use in
+cases where DWARF information is not available, this second mechanism
+is often an analysis of a function's prologue.
+
+In order to extend testing coverage of the second level stack
+unwinding mechanisms it is helpful to be able to disable the DWARF
+stack unwinders, this can be done with this switch.
+
+In normal use of @value{GDBN} disabling the DWARF unwinders is not
+advisable, there are cases that are better handled through DWARF than
+prologue analysis, and the debug experience is likely to be better
+with the DWARF frame unwinders enabled.
+
+If DWARF frame unwinders are not supported for a particular target
+architecture, then enabling this flag does not cause them to be used.
@kindex maint set profile
@kindex maint show profile
@cindex profiling GDB
@end enumerate
@end table
+@kindex maint set check-libthread-db
+@kindex maint show check-libthread-db
+@item maint set check-libthread-db [on|off]
+@itemx maint show check-libthread-db
+Control whether @value{GDBN} should run integrity checks on inferior
+specific thread debugging libraries as they are loaded. The default
+is not to perform such checks. If any check fails @value{GDBN} will
+unload the library and continue searching for a suitable candidate as
+described in @ref{set libthread-db-search-path}. For more information
+about the tests, see @ref{maint check libthread-db}.
+
@kindex maint space
@cindex memory used by commands
@item maint space @var{value}
@item int8
@itemx int16
+@itemx int24
@itemx int32
@itemx int64
@itemx int128
@item uint8
@itemx uint16
+@itemx uint24
@itemx uint32
@itemx uint64
@itemx uint128
* Nios II Features::
* OpenRISC 1000 Features::
* PowerPC Features::
+* RISC-V Features::
* S/390 and System z Features::
* Sparc Features::
* TIC6x Features::
it should contain registers @samp{v0} through @samp{v31}, @samp{fpsr},
and @samp{fpcr}.
+The @samp{org.gnu.gdb.aarch64.sve} feature is optional. If present,
+it should contain registers @samp{z0} through @samp{z31}, @samp{p0}
+through @samp{p15}, @samp{ffr} and @samp{vg}.
+
+The @samp{org.gnu.gdb.aarch64.pauth} feature is optional. If present,
+it should contain registers @samp{pauth_dmask} and @samp{pauth_cmask}.
+
@node ARC Features
@subsection ARC Features
@cindex target descriptions, ARC Features
contain registers @samp{f0} through @samp{f31} and @samp{fpscr}.
The @samp{org.gnu.gdb.power.altivec} feature is optional. It should
-contain registers @samp{vr0} through @samp{vr31}, @samp{vscr},
-and @samp{vrsave}.
+contain registers @samp{vr0} through @samp{vr31}, @samp{vscr}, and
+@samp{vrsave}. @value{GDBN} will define pseudo-registers @samp{v0}
+through @samp{v31} as aliases for the corresponding @samp{vrX}
+registers.
The @samp{org.gnu.gdb.power.vsx} feature is optional. It should
-contain registers @samp{vs0h} through @samp{vs31h}. @value{GDBN}
-will combine these registers with the floating point registers
-(@samp{f0} through @samp{f31}) and the altivec registers (@samp{vr0}
-through @samp{vr31}) to present the 128-bit wide registers @samp{vs0}
-through @samp{vs63}, the set of vector registers for POWER7.
+contain registers @samp{vs0h} through @samp{vs31h}. @value{GDBN} will
+combine these registers with the floating point registers (@samp{f0}
+through @samp{f31}) and the altivec registers (@samp{vr0} through
+@samp{vr31}) to present the 128-bit wide registers @samp{vs0} through
+@samp{vs63}, the set of vector-scalar registers for POWER7.
+Therefore, this feature requires both @samp{org.gnu.gdb.power.fpu} and
+@samp{org.gnu.gdb.power.altivec}.
The @samp{org.gnu.gdb.power.spe} feature is optional. It should
contain registers @samp{ev0h} through @samp{ev31h}, @samp{acc}, and
these to present registers @samp{ev0} through @samp{ev31} to the
user.
+The @samp{org.gnu.gdb.power.ppr} feature is optional. It should
+contain the 64-bit register @samp{ppr}.
+
+The @samp{org.gnu.gdb.power.dscr} feature is optional. It should
+contain the 64-bit register @samp{dscr}.
+
+The @samp{org.gnu.gdb.power.tar} feature is optional. It should
+contain the 64-bit register @samp{tar}.
+
+The @samp{org.gnu.gdb.power.ebb} feature is optional. It should
+contain registers @samp{bescr}, @samp{ebbhr} and @samp{ebbrr}, all
+64-bit wide.
+
+The @samp{org.gnu.gdb.power.linux.pmu} feature is optional. It should
+contain registers @samp{mmcr0}, @samp{mmcr2}, @samp{siar}, @samp{sdar}
+and @samp{sier}, all 64-bit wide. This is the subset of the isa 2.07
+server PMU registers provided by @sc{gnu}/Linux.
+
+The @samp{org.gnu.gdb.power.htm.spr} feature is optional. It should
+contain registers @samp{tfhar}, @samp{texasr} and @samp{tfiar}, all
+64-bit wide.
+
+The @samp{org.gnu.gdb.power.htm.core} feature is optional. It should
+contain the checkpointed general-purpose registers @samp{cr0} through
+@samp{cr31}, as well as the checkpointed registers @samp{clr} and
+@samp{cctr}. These registers may all be either 32-bit or 64-bit
+depending on the target. It should also contain the checkpointed
+registers @samp{ccr} and @samp{cxer}, which should both be 32-bit
+wide.
+
+The @samp{org.gnu.gdb.power.htm.fpu} feature is optional. It should
+contain the checkpointed 64-bit floating-point registers @samp{cf0}
+through @samp{cf31}, as well as the checkpointed 64-bit register
+@samp{cfpscr}.
+
+The @samp{org.gnu.gdb.power.htm.altivec} feature is optional. It
+should contain the checkpointed altivec registers @samp{cvr0} through
+@samp{cvr31}, all 128-bit wide. It should also contain the
+checkpointed registers @samp{cvscr} and @samp{cvrsave}, both 32-bit
+wide.
+
+The @samp{org.gnu.gdb.power.htm.vsx} feature is optional. It should
+contain registers @samp{cvs0h} through @samp{cvs31h}. @value{GDBN}
+will combine these registers with the checkpointed floating point
+registers (@samp{cf0} through @samp{cf31}) and the checkpointed
+altivec registers (@samp{cvr0} through @samp{cvr31}) to present the
+128-bit wide checkpointed vector-scalar registers @samp{cvs0} through
+@samp{cvs63}. Therefore, this feature requires both
+@samp{org.gnu.gdb.power.htm.altivec} and
+@samp{org.gnu.gdb.power.htm.fpu}.
+
+The @samp{org.gnu.gdb.power.htm.ppr} feature is optional. It should
+contain the 64-bit checkpointed register @samp{cppr}.
+
+The @samp{org.gnu.gdb.power.htm.dscr} feature is optional. It should
+contain the 64-bit checkpointed register @samp{cdscr}.
+
+The @samp{org.gnu.gdb.power.htm.tar} feature is optional. It should
+contain the 64-bit checkpointed register @samp{ctar}.
+
+
+@node RISC-V Features
+@subsection RISC-V Features
+@cindex target descriptions, RISC-V Features
+
+The @samp{org.gnu.gdb.riscv.cpu} feature is required for RISC-V
+targets. It should contain the registers @samp{x0} through
+@samp{x31}, and @samp{pc}. Either the architectural names (@samp{x0},
+@samp{x1}, etc) can be used, or the ABI names (@samp{zero}, @samp{ra},
+etc).
+
+The @samp{org.gnu.gdb.riscv.fpu} feature is optional. If present, it
+should contain registers @samp{f0} through @samp{f31}, @samp{fflags},
+@samp{frm}, and @samp{fcsr}. As with the cpu feature, either the
+architectural register names, or the ABI names can be used.
+
+The @samp{org.gnu.gdb.riscv.virtual} feature is optional. If present,
+it should contain registers that are not backed by real registers on
+the target, but are instead virtual, where the register value is
+derived from other target state. In many ways these are like
+@value{GDBN}s pseudo-registers, except implemented by the target.
+Currently the only register expected in this set is the one byte
+@samp{priv} register that contains the target's privilege level in the
+least significant two bits.
+
+The @samp{org.gnu.gdb.riscv.csr} feature is optional. If present, it
+should contain all of the target's standard CSRs. Standard CSRs are
+those defined in the RISC-V specification documents. There is some
+overlap between this feature and the fpu feature; the @samp{fflags},
+@samp{frm}, and @samp{fcsr} registers could be in either feature. The
+expectation is that these registers will be in the fpu feature if the
+target has floating point hardware, but can be moved into the csr
+feature if the target has the floating point control registers, but no
+other floating point hardware.
+
@node S/390 and System z Features
@subsection S/390 and System z Features
@cindex target descriptions, S/390 features
* gdbserver man:: Remote Server for the GNU Debugger man page
* gcore man:: Generate a core file of a running program
* gdbinit man:: gdbinit scripts
+* gdb-add-index man:: Add index files to speed up GDB
@end menu
@node gdb man
@end ifset
You need an unstripped copy of the target program on your host system, since
-@value{GDBN} needs to examine it's symbol tables and such. Start up @value{GDBN} as you normally
+@value{GDBN} needs to examine its symbol tables and such. Start up @value{GDBN} as you normally
would, with the target program as the first argument. (You may need to use the
@option{--baud} option if the serial line is running at anything except 9600 baud.)
That is @code{gdb TARGET-PROG}, or @code{gdb --baud BAUD TARGET-PROG}. After that, the only
@format
@c man begin SYNOPSIS gcore
-gcore [-a] [-o @var{filename}] @var{pid}
+gcore [-a] [-o @var{prefix}] @var{pid1} [@var{pid2}...@var{pidN}]
@c man end
@end format
@c man begin DESCRIPTION gcore
-Generate a core dump of a running program with process ID @var{pid}.
-Produced file is equivalent to a kernel produced core file as if the process
-crashed (and if @kbd{ulimit -c} were used to set up an appropriate core dump
-limit). Unlike after a crash, after @command{gcore} the program remains
-running without any change.
+Generate core dumps of one or more running programs with process IDs
+@var{pid1}, @var{pid2}, etc. A core file produced by @command{gcore}
+is equivalent to one produced by the kernel when the process crashes
+(and when @kbd{ulimit -c} was used to set up an appropriate core dump
+limit). However, unlike after a crash, after @command{gcore} finishes
+its job the program remains running without any change.
@c man end
@c man begin OPTIONS gcore
enable @code{dump-excluded-mappings} (@pxref{set
dump-excluded-mappings}).
-@item -o @var{filename}
-The optional argument
-@var{filename} specifies the file name where to put the core dump.
-If not specified, the file name defaults to @file{core.@var{pid}},
-where @var{pid} is the running program process ID.
+@item -o @var{prefix}
+The optional argument @var{prefix} specifies the prefix to be used
+when composing the file names of the core dumps. The file name is
+composed as @file{@var{prefix}.@var{pid}}, where @var{pid} is the
+process ID of the running program being analyzed by @command{gcore}.
+If not specified, @var{prefix} defaults to @var{gcore}.
@end table
@c man end
@end ifset
@c man end
+@node gdb-add-index man
+@heading gdb-add-index
+@pindex gdb-add-index
+@anchor{gdb-add-index}
+
+@c man title gdb-add-index Add index files to speed up GDB
+
+@c man begin SYNOPSIS gdb-add-index
+gdb-add-index @var{filename}
+@c man end
+
+@c man begin DESCRIPTION gdb-add-index
+When @value{GDBN} finds a symbol file, it scans the symbols in the
+file in order to construct an internal symbol table. This lets most
+@value{GDBN} operations work quickly--at the cost of a delay early on.
+For large programs, this delay can be quite lengthy, so @value{GDBN}
+provides a way to build an index, which speeds up startup.
+
+To determine whether a file contains such an index, use the command
+@kbd{readelf -S filename}: the index is stored in a section named
+@code{.gdb_index}. The index file can only be produced on systems
+which use ELF binaries and DWARF debug information (i.e., sections
+named @code{.debug_*}).
+
+@command{gdb-add-index} uses @value{GDBN} and @command{objdump} found
+in the @env{PATH} environment variable. If you want to use different
+versions of these programs, you can specify them through the
+@env{GDB} and @env{OBJDUMP} environment variables.
+
+See more in
+@ifset man
+the @value{GDBN} manual in node @code{Index Files}
+-- shell command @kbd{info -f gdb -n "Index Files"}.
+@end ifset
+@ifclear man
+@ref{Index Files}.
+@end ifclear
+@c man end
+
+@c man begin SEEALSO gdb-add-index
+@ifset man
+The full documentation for @value{GDBN} is maintained as a Texinfo manual.
+If the @code{info} and @code{gdb} programs and @value{GDBN}'s Texinfo
+documentation are properly installed at your site, the command
+
+@smallexample
+info gdb
+@end smallexample
+
+should give you access to the complete manual.
+
+@cite{Using GDB: A Guide to the GNU Source-Level Debugger},
+Richard M. Stallman and Roland H. Pesch, July 1991.
+@end ifset
+@c man end
+
@include gpl.texi
@node GNU Free Documentation License
projects / deliverable / binutils-gdb.git / blobdiff