\input texinfo
@setfilename gdbint.info
-@c $Id$
-
+@include gdb-cfg.texi
@ifinfo
@format
START-INFO-DIR-ENTRY
@end ifinfo
@ifinfo
-This file documents the internals of the GNU debugger GDB.
+This file documents the internals of the GNU debugger @value{GDBN}.
-Copyright 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
-Contributed by Cygnus Support. Written by John Gilmore.
+Copyright 1990-1999 Free Software Foundation, Inc.
+Contributed by Cygnus Solutions. Written by John Gilmore.
+Second Edition by Stan Shebs.
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
+Permission is granted to make and distribute verbatim copies of this
+manual provided the copyright notice and this permission notice are
+preserved on all copies.
@ignore
Permission is granted to process this file through Tex and print the
-results, provided the printed document carries copying permission
-notice identical to this one except for the removal of this paragraph
-(this paragraph not being relevant to the printed manual).
+results, provided the printed document carries copying permission notice
+identical to this one except for the removal of this paragraph (this
+paragraph not being relevant to the printed manual).
@end ignore
Permission is granted to copy or distribute modified versions of this
@end ifinfo
@setchapternewpage off
-@settitle GDB Internals
+@settitle @value{GDBN} Internals
+
@titlepage
-@title{Working in GDB}
+@title @value{GDBN} Internals
@subtitle{A guide to the internals of the GNU debugger}
@author John Gilmore
-@author Cygnus Support
+@author Cygnus Solutions
+@author Second Edition:
+@author Stan Shebs
+@author Cygnus Solutions
@page
@tex
\def\$#1${{#1}} % Kluge: collect RCS revision info without $...$
\xdef\manvers{\$Revision$} % For use in headers, footers too
{\parskip=0pt
-\hfill Cygnus Support\par
+\hfill Cygnus Solutions\par
\hfill \manvers\par
\hfill \TeX{}info \texinfoversion\par
}
@end tex
@vskip 0pt plus 1filll
-Copyright @copyright{} 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
+Copyright @copyright{} 1990-1999 Free Software Foundation, Inc.
Permission is granted to make and distribute verbatim copies of
this manual provided the copyright notice and this permission notice
@end titlepage
+@c TeX can handle the contents at the start but makeinfo 3.12 can not
+@iftex
+@contents
+@end iftex
+
@node Top
@c Perhaps this should be the title of the document (but only for info,
@c not for TeX). Existing GNU manuals seem inconsistent on this point.
@top Scope of this Document
-This document documents the internals of the GNU debugger, GDB. It is
-intended to document aspects of GDB which apply across many different
-parts of GDB (for example, @pxref{Coding Style}), or which are global
-aspects of design (for example, what are the major modules and which
-files document them in detail?). Information which pertains to specific
-data structures, functions, variables, etc., should be put in comments
-in the source code, not here. It is more likely to get noticed and kept
-up to date there. Some of the information in this document should
-probably be moved into comments.
+This document documents the internals of the GNU debugger, @value{GDBN}. It
+includes description of @value{GDBN}'s key algorithms and operations, as well
+as the mechanisms that adapt @value{GDBN} to specific hosts and targets.
@menu
-* README:: The README File
-* Getting Started:: Getting started working on GDB
-* Debugging GDB:: Debugging GDB with itself
-* New Architectures:: Defining a New Host or Target Architecture
-* Config:: Adding a New Configuration
-* Host:: Adding a New Host
-* Native:: Adding a New Native Configuration
-* Target:: Adding a New Target
-* Languages:: Defining New Source Languages
-* Releases:: Configuring GDB for Release
-* Partial Symbol Tables:: How GDB reads symbols quickly at startup
-* Types:: How GDB keeps track of types
-* BFD support for GDB:: How BFD and GDB interface
-* Symbol Reading:: Defining New Symbol Readers
-* Cleanups:: Cleanups
-* Wrapping:: Wrapping Output Lines
-* Frames:: Keeping track of function calls
-* Remote Stubs:: Code that runs in targets and talks to GDB
-* Longjmp Support:: Stepping through longjmp's in the target
-* Coding Style:: Strunk and White for GDB maintainers
-* Clean Design:: Frank Lloyd Wright for GDB maintainers
-* Submitting Patches:: How to get your changes into GDB releases
-* Host Conditionals:: What features exist in the host
-* Target Conditionals:: What features exist in the target
-* Native Conditionals:: Conditionals for when host and target are same
-* Obsolete Conditionals:: Conditionals that don't exist any more
-* XCOFF:: The Object file format used on IBM's RS/6000
+* Requirements::
+* Overall Structure::
+* Algorithms::
+* User Interface::
+* Symbol Handling::
+* Language Support::
+* Host Definition::
+* Target Architecture Definition::
+* Target Vector Definition::
+* Native Debugging::
+* Support Libraries::
+* Coding::
+* Porting GDB::
+* Testsuite::
+* Hints::
@end menu
-@node README
-@chapter The @file{README} File
+@node Requirements
-Check the @file{README} file, it often has useful information that does not
-appear anywhere else in the directory.
+@chapter Requirements
-@node Getting Started
-@chapter Getting Started Working on GDB
+Before diving into the internals, you should understand the formal
+requirements and other expectations for @value{GDBN}. Although some of these may
+seem obvious, there have been proposals for @value{GDBN} that have run counter to
+these requirements.
-GDB is a large and complicated program, and if you first starting to
-work on it, it can be hard to know where to start. Fortunately, if you
-know how to go about it, there are ways to figure out what is going on:
+First of all, @value{GDBN} is a debugger. It's not designed to be a front panel
+for embedded systems. It's not a text editor. It's not a shell. It's
+not a programming environment.
-@itemize @bullet
-@item
-This manual, the GDB Internals manual, has information which applies
-generally to many parts of GDB.
+@value{GDBN} is an interactive tool. Although a batch mode is available, @value{GDBN}'s
+primary role is to interact with a human programmer.
-@item
-Information about particular functions or data structures are located in
-comments with those functions or data structures. If you run across a
-function or a global variable which does not have a comment correctly
-explaining what is does, this can be thought of as a bug in GDB; feel
-free to submit a bug report, with a suggested comment if you can figure
-out what the comment should say (@pxref{Submitting Patches}). If you
-find a comment which is actually wrong, be especially sure to report that.
+@value{GDBN} should be responsive to the user. A programmer hot on the trail of
+a nasty bug, and operating under a looming deadline, is going to be very
+impatient of everything, including the response time to debugger
+commands.
-Comments explaining the function of macros defined in host, target, or
-native dependent files can be in several places. Sometimes they are
-repeated every place the macro is defined. Sometimes they are where the
-macro is used. Sometimes there is a header file which supplies a
-default definition of the macro, and the comment is there. This manual
-also has a list of macros (@pxref{Host Conditionals}, @pxref{Target
-Conditionals}, @pxref{Native Conditionals}, and @pxref{Obsolete
-Conditionals}) with some documentation.
+@value{GDBN} should be relatively permissive, such as for expressions. While the
+compiler should be picky (or have the option to be made picky), since
+source code lives for a long time usually, the programmer doing
+debugging shouldn't be spending time figuring out to mollify the
+debugger.
-@item
-Start with the header files. Once you some idea of how GDB's internal
-symbol tables are stored (see @file{symtab.h}, @file{gdbtypes.h}), you
-will find it much easier to understand the code which uses and creates
-those symbol tables.
+@value{GDBN} will be called upon to deal with really large programs. Executable
+sizes of 50 to 100 megabytes occur regularly, and we've heard reports of
+programs approaching 1 gigabyte in size.
-@item
-You may wish to process the information you are getting somehow, to
-enhance your understanding of it. Summarize it, translate it to another
-language, add some (perhaps trivial or non-useful) feature to GDB, use
-the code to predict what a test case would do and write the test case
-and verify your prediction, etc. If you are reading code and your eyes
-are starting to glaze over, this is a sign you need to use a more active
-approach.
+@value{GDBN} should be able to run everywhere. No other debugger is available
+for even half as many configurations as @value{GDBN} supports.
-@item
-Once you have a part of GDB to start with, you can find more
-specifically the part you are looking for by stepping through each
-function with the @code{next} command. Do not use @code{step} or you
-will quickly get distracted; when the function you are stepping through
-calls another function try only to get a big-picture understanding
-(perhaps using the comment at the beginning of the function being
-called) of what it does. This way you can identify which of the
-functions being called by the function you are stepping through is the
-one which you are interested in. You may need to examine the data
-structures generated at each stage, with reference to the comments in
-the header files explaining what the data structures are supposed to
-look like.
-Of course, this same technique can be used if you are just reading the
-code, rather than actually stepping through it. The same general
-principle applies---when the code you are looking at calls something
-else, just try to understand generally what the code being called does,
-rather than worrying about all its details.
+@node Overall Structure
-@item
-A good place to start when tracking down some particular area is with a
-command which invokes that feature. Suppose you want to know how
-single-stepping works. As a GDB user, you know that the @code{step}
-command invokes single-stepping. The command is invoked via command
-tables (see @file{command.h}); by convention the function which actually
-performs the command is formed by taking the name of the command and
-adding @samp{_command}, or in the case of an @code{info} subcommand,
-@samp{_info}. For example, the @code{step} command invokes the
-@code{step_command} function and the @code{info display} command invokes
-@code{display_info}. When this convention is not followed, you might
-have to use @code{grep} or @kbd{M-x tags-search} in emacs, or run GDB on
-itself and set a breakpoint in @code{execute_command}.
+@chapter Overall Structure
-@item
-If all of the above fail, it may be appropriate to ask for information
-on @code{bug-gdb}. But @emph{never} post a generic question like ``I was
-wondering if anyone could give me some tips about understanding
-GDB''---if we had some magic secret we would put it in this manual.
-Suggestions for improving the manual are always welcome, of course.
-@end itemize
+@value{GDBN} consists of three major subsystems: user interface, symbol handling
+(the ``symbol side''), and target system handling (the ``target side'').
-Good luck!
+The user interface consists of several actual interfaces, plus
+supporting code.
-@node Debugging GDB
-@chapter Debugging GDB with itself
-If gdb is limping on your machine, this is the preferred way to get it
-fully functional. Be warned that in some ancient Unix systems, like
-Ultrix 4.2, a program can't be running in one process while it is being
-debugged in another. Rather than typing the command @code{@w{./gdb
-./gdb}}, which works on Suns and such, you can copy @file{gdb} to
-@file{gdb2} and then type @code{@w{./gdb ./gdb2}}.
+The symbol side consists of object file readers, debugging info
+interpreters, symbol table management, source language expression
+parsing, type and value printing.
-When you run gdb in the gdb source directory, it will read a
-@file{.gdbinit} file that sets up some simple things to make debugging
-gdb easier. The @code{info} command, when executed without a subcommand
-in a gdb being debugged by gdb, will pop you back up to the top level
-gdb. See @file{.gdbinit} for details.
+The target side consists of execution control, stack frame analysis, and
+physical target manipulation.
-If you use emacs, you will probably want to do a @code{make TAGS} after
-you configure your distribution; this will put the machine dependent
-routines for your local machine where they will be accessed first by
-@kbd{M-.}
+The target side/symbol side division is not formal, and there are a
+number of exceptions. For instance, core file support involves symbolic
+elements (the basic core file reader is in BFD) and target elements (it
+supplies the contents of memory and the values of registers). Instead,
+this division is useful for understanding how the minor subsystems
+should fit together.
-Also, make sure that you've either compiled gdb with your local cc, or
-have run @code{fixincludes} if you are compiling with gcc.
+@section The Symbol Side
-@node New Architectures
-@chapter Defining a New Host or Target Architecture
+The symbolic side of @value{GDBN} can be thought of as ``everything you can do in
+@value{GDBN} without having a live program running''. For instance, you can look
+at the types of variables, and evaluate many kinds of expressions.
-When building support for a new host and/or target, much of the work you
-need to do is handled by specifying configuration files;
-@pxref{Config,,Adding a New Configuration}. Further work can be
-divided into ``host-dependent'' (@pxref{Host,,Adding a New Host}) and
-``target-dependent'' (@pxref{Target,,Adding a New Target}). The
-following discussion is meant to explain the difference between hosts
-and targets.
+@section The Target Side
-@heading What is considered ``host-dependent'' versus ``target-dependent''?
+The target side of @value{GDBN} is the ``bits and bytes manipulator''. Although
+it may make reference to symbolic info here and there, most of the
+target side will run with only a stripped executable available -- or
+even no executable at all, in remote debugging cases.
-@dfn{Host} refers to attributes of the system where GDB runs.
+Operations such as disassembly, stack frame crawls, and register
+display, are able to work with no symbolic info at all. In some cases,
+such as disassembly, @value{GDBN} will use symbolic info to present addresses
+relative to symbols rather than as raw numbers, but it will work either
+way.
+
+@section Configurations
+
+@dfn{Host} refers to attributes of the system where @value{GDBN} runs.
@dfn{Target} refers to the system where the program being debugged
-executes. In most cases they are the same machine, in which case
-a third type of @dfn{Native} attributes come into play.
+executes. In most cases they are the same machine, in which case a
+third type of @dfn{Native} attributes come into play.
Defines and include files needed to build on the host are host support.
Examples are tty support, system defined types, host byte order, host
is native dependent. One example is Unix child process support; if the
host and target are not the same, doing a fork to start the target
process is a bad idea. The various macros needed for finding the
-registers in the @code{upage}, running @code{ptrace}, and such are all in the
-native-dependent files.
+registers in the @code{upage}, running @code{ptrace}, and such are all
+in the native-dependent files.
-Another example of native-dependent code is support for features
-that are really part of the target environment, but which require
-@code{#include} files that are only available on the host system.
-Core file handling and @code{setjmp} handling are two common cases.
+Another example of native-dependent code is support for features that
+are really part of the target environment, but which require
+@code{#include} files that are only available on the host system. Core
+file handling and @code{setjmp} handling are two common cases.
-When you want to make GDB work ``native'' on a particular
-machine, you have to include all three kinds of information.
+When you want to make @value{GDBN} work ``native'' on a particular machine, you
+have to include all three kinds of information.
-The dependent information in GDB is organized into files by naming
-conventions.
-
-Host-Dependent Files
-@table @file
-@item config/*/*.mh
-Sets Makefile parameters
-@item config/*/xm-*.h
-Global #include's and #define's and definitions
-@item *-xdep.c
-Global variables and functions
-@end table
-Native-Dependent Files
-@table @file
-@item config/*/*.mh
-Sets Makefile parameters (for @emph{both} host and native)
-@item config/*/nm-*.h
-#include's and #define's and definitions. This file
-is only included by the small number of modules that need it,
-so beware of doing feature-test #define's from its macros.
-@item *-nat.c
-global variables and functions
-@end table
+@node Algorithms
-Target-Dependent Files
-@table @file
-@item config/*/*.mt
-Sets Makefile parameters
-@item config/*/tm-*.h
-Global #include's and #define's and definitions
-@item *-tdep.c
-Global variables and functions
-@end table
+@chapter Algorithms
-At this writing, most supported hosts have had their host and native
-dependencies sorted out properly. There are a few stragglers, which
-can be recognized by the absence of NATDEPFILES lines in their
-@file{config/*/*.mh}.
+@value{GDBN} uses a number of debugging-specific algorithms. They are often not
+very complicated, but get lost in the thicket of special cases and
+real-world issues. This chapter describes the basic algorithms and
+mentions some of the specific target definitions that they use.
-@node Config
-@chapter Adding a New Configuration
+@section Frames
-Most of the work in making GDB compile on a new machine is in specifying
-the configuration of the machine. This is done in a dizzying variety of
-header files and configuration scripts, which we hope to make more
-sensible soon. Let's say your new host is called an @var{xxx} (e.g.
-@samp{sun4}), and its full three-part configuration name is
-@code{@var{xarch}-@var{xvend}-@var{xos}} (e.g. @samp{sparc-sun-sunos4}). In
-particular:
+A frame is a construct that @value{GDBN} uses to keep track of calling and called
+functions.
-In the top level directory, edit @file{config.sub} and add @var{xarch},
-@var{xvend}, and @var{xos} to the lists of supported architectures,
-vendors, and operating systems near the bottom of the file. Also, add
-@var{xxx} as an alias that maps to
-@code{@var{xarch}-@var{xvend}-@var{xos}}. You can test your changes by
-running
+@code{FRAME_FP} in the machine description has no meaning to the
+machine-independent part of @value{GDBN}, except that it is used when setting up
+a new frame from scratch, as follows:
@example
-./config.sub @var{xxx}
-@end example
-@noindent
-and
-@example
-./config.sub @code{@var{xarch}-@var{xvend}-@var{xos}}
+ create_new_frame (read_register (FP_REGNUM), read_pc ()));
@end example
-@noindent
-which should both respond with @code{@var{xarch}-@var{xvend}-@var{xos}}
-and no error messages.
-Now, go to the @file{bfd} directory and
-create a new file @file{bfd/hosts/h-@var{xxx}.h}. Examine the
-other @file{h-*.h} files as templates, and create one that brings in the
-right include files for your system, and defines any host-specific
-macros needed by BFD, the Binutils, GNU LD, or the Opcodes directories.
-(They all share the bfd @file{hosts} directory and the @file{configure.host}
-file.)
-
-Then edit @file{bfd/configure.host}. Add a line to recognize your
-@code{@var{xarch}-@var{xvend}-@var{xos}} configuration, and set
-@code{my_host} to @var{xxx} when you recognize it. This will cause your
-file @file{h-@var{xxx}.h} to be linked to @file{sysdep.h} at configuration
-time. When creating the line that recognizes your configuration,
-only match the fields that you really need to match; e.g. don't
-match the architecture or manufacturer if the OS is sufficient
-to distinguish the configuration that your @file{h-@var{xxx}.h} file supports.
-Don't match the manufacturer name unless you really need to.
-This should make future ports easier.
-
-Also, if this host requires any changes to the Makefile, create a file
-@file{bfd/config/@var{xxx}.mh}, which includes the required lines.
-
-It's possible that the @file{libiberty} and @file{readline} directories
-won't need any changes for your configuration, but if they do, you can
-change the @file{configure.in} file there to recognize your system and
-map to an @file{mh-@var{xxx}} file. Then add @file{mh-@var{xxx}}
-to the @file{config/} subdirectory, to set any makefile variables you
-need. The only current options in there are things like @samp{-DSYSV}.
-(This @file{mh-@var{xxx}} naming convention differs from elsewhere
-in GDB, by historical accident. It should be cleaned up so that all
-such files are called @file{@var{xxx}.mh}.)
-
-Aha! Now to configure GDB itself! Edit
-@file{gdb/configure.in} to recognize your system and set @code{gdb_host}
-to @var{xxx}, and (unless your desired target is already available) also
-set @code{gdb_target} to something appropriate (for instance,
-@var{xxx}). To handle new hosts, modify the segment after the comment
-@samp{# per-host}; to handle new targets, modify after @samp{#
-per-target}.
-@c Would it be simpler to just use different per-host and per-target
-@c *scripts*, and call them from {configure} ?
-
-Finally, you'll need to specify and define GDB's host-, native-, and
-target-dependent @file{.h} and @file{.c} files used for your
-configuration; the next two chapters discuss those.
+Other than that, all the meaning imparted to @code{FP_REGNUM} is
+imparted by the machine-dependent code. So, @code{FP_REGNUM} can have
+any value that is convenient for the code that creates new frames.
+(@code{create_new_frame} calls @code{INIT_EXTRA_FRAME_INFO} if it is
+defined; that is where you should use the @code{FP_REGNUM} value, if
+your frames are nonstandard.)
+
+Given a @value{GDBN} frame, define @code{FRAME_CHAIN} to determine the address of
+the calling function's frame. This will be used to create a new @value{GDBN}
+frame struct, and then @code{INIT_EXTRA_FRAME_INFO} and
+@code{INIT_FRAME_PC} will be called for the new frame.
+
+@section Breakpoint Handling
+
+In general, a breakpoint is a user-designated location in the program
+where the user wants to regain control if program execution ever reaches
+that location.
+
+There are two main ways to implement breakpoints; either as ``hardware''
+breakpoints or as ``software'' breakpoints.
+
+Hardware breakpoints are sometimes available as a builtin debugging
+features with some chips. Typically these work by having dedicated
+register into which the breakpoint address may be stored. If the PC
+ever matches a value in a breakpoint registers, the CPU raises an
+exception and reports it to @value{GDBN}. Another possibility is when an
+emulator is in use; many emulators include circuitry that watches the
+address lines coming out from the processor, and force it to stop if the
+address matches a breakpoint's address. A third possibility is that the
+target already has the ability to do breakpoints somehow; for instance,
+a ROM monitor may do its own software breakpoints. So although these
+are not literally ``hardware breakpoints'', from @value{GDBN}'s point of view
+they work the same; @value{GDBN} need not do nothing more than set the breakpoint
+and wait for something to happen.
+
+Since they depend on hardware resources, hardware breakpoints may be
+limited in number; when the user asks for more, @value{GDBN} will start trying to
+set software breakpoints.
+
+Software breakpoints require @value{GDBN} to do somewhat more work. The basic
+theory is that @value{GDBN} will replace a program instruction with a trap,
+illegal divide, or some other instruction that will cause an exception,
+and then when it's encountered, @value{GDBN} will take the exception and stop the
+program. When the user says to continue, @value{GDBN} will restore the original
+instruction, single-step, re-insert the trap, and continue on.
+
+Since it literally overwrites the program being tested, the program area
+must be writeable, so this technique won't work on programs in ROM. It
+can also distort the behavior of programs that examine themselves,
+although the situation would be highly unusual.
+
+Also, the software breakpoint instruction should be the smallest size of
+instruction, so it doesn't overwrite an instruction that might be a jump
+target, and cause disaster when the program jumps into the middle of the
+breakpoint instruction. (Strictly speaking, the breakpoint must be no
+larger than the smallest interval between instructions that may be jump
+targets; perhaps there is an architecture where only even-numbered
+instructions may jumped to.) Note that it's possible for an instruction
+set not to have any instructions usable for a software breakpoint,
+although in practice only the ARC has failed to define such an
+instruction.
+
+The basic definition of the software breakpoint is the macro
+@code{BREAKPOINT}.
+
+Basic breakpoint object handling is in @file{breakpoint.c}. However,
+much of the interesting breakpoint action is in @file{infrun.c}.
+
+@section Single Stepping
+
+@section Signal Handling
+
+@section Thread Handling
+
+@section Inferior Function Calls
+
+@section Longjmp Support
+
+@value{GDBN} has support for figuring out that the target is doing a
+@code{longjmp} and for stopping at the target of the jump, if we are
+stepping. This is done with a few specialized internal breakpoints,
+which are visible in the @code{maint info breakpoint} command.
+To make this work, you need to define a macro called
+@code{GET_LONGJMP_TARGET}, which will examine the @code{jmp_buf}
+structure and extract the longjmp target address. Since @code{jmp_buf}
+is target specific, you will need to define it in the appropriate
+@file{tm-@var{xyz}.h} file. Look in @file{tm-sun4os4.h} and
+@file{sparc-tdep.c} for examples of how to do this.
-@node Host
-@chapter Adding a New Host
+@node User Interface
-Once you have specified a new configuration for your host
-(@pxref{Config,,Adding a New Configuration}), there are three remaining
-pieces to making GDB work on a new machine. First, you have to make it
-host on the new machine (compile there, handle that machine's terminals
-properly, etc). If you will be cross-debugging to some other kind of
-system that's already supported, you are done.
+@chapter User Interface
-If you want to use GDB to debug programs that run on the new machine,
-you have to get it to understand the machine's object files, symbol
-files, and interfaces to processes; @pxref{Target,,Adding a New Target}
-and @pxref{Native,,Adding a New Native Configuration}
+@value{GDBN} has several user interfaces. Although the command-line interface
+is the most common and most familiar, there are others.
-Several files control GDB's configuration for host systems:
+@section Command Interpreter
-@table @file
-@item gdb/config/@var{arch}/@var{xxx}.mh
-Specifies Makefile fragments needed when hosting on machine @var{xxx}.
-In particular, this lists the required machine-dependent object files,
-by defining @samp{XDEPFILES=@dots{}}. Also
-specifies the header file which describes host @var{xxx}, by defining
-@code{XM_FILE= xm-@var{xxx}.h}. You can also define @code{CC},
-@code{REGEX} and @code{REGEX1}, @code{SYSV_DEFINE}, @code{XM_CFLAGS},
-@code{XM_ADD_FILES}, @code{XM_CLIBS}, @code{XM_CDEPS},
-etc.; see @file{Makefile.in}.
+The command interpreter in @value{GDBN} is fairly simple. It is designed to
+allow for the set of commands to be augmented dynamically, and also
+has a recursive subcommand capability, where the first argument to
+a command may itself direct a lookup on a different command list.
-@item gdb/config/@var{arch}/xm-@var{xxx}.h
-(@file{xm.h} is a link to this file, created by configure).
-Contains C macro definitions describing the host system environment,
-such as byte order, host C compiler and library, ptrace support,
-and core file structure. Crib from existing @file{xm-*.h} files
-to create a new one.
-
-@item gdb/@var{xxx}-xdep.c
-Contains any miscellaneous C code required for this machine
-as a host. On many machines it doesn't exist at all. If it does
-exist, put @file{@var{xxx}-xdep.o} into the @code{XDEPFILES} line
-in @file{gdb/config/mh-@var{xxx}}.
-@end table
+For instance, the @code{set} command just starts a lookup on the
+@code{setlist} command list, while @code{set thread} recurses
+to the @code{set_thread_cmd_list}.
-@subheading Generic Host Support Files
+To add commands in general, use @code{add_cmd}. @code{add_com} adds to
+the main command list, and should be used for those commands. The usual
+place to add commands is in the @code{_initialize_@var{xyz}} routines at
+the ends of most source files.
-There are some ``generic'' versions of routines that can be used by
-various systems. These can be customized in various ways by macros
-defined in your @file{xm-@var{xxx}.h} file. If these routines work for
-the @var{xxx} host, you can just include the generic file's name (with
-@samp{.o}, not @samp{.c}) in @code{XDEPFILES}.
+Before removing commands from the command set it is a good idea to
+deprecate them for some time. Use @code{deprecate_cmd} on commands or
+aliases to set the deprecated flag. @code{deprecate_cmd} takes a
+@code{struct cmd_list_element} as it's first argument. You can use the
+return value from @code{add_com} or @code{add_cmd} to deprecate the
+command immediately after it is created.
-Otherwise, if your machine needs custom support routines, you will need
-to write routines that perform the same functions as the generic file.
-Put them into @code{@var{xxx}-xdep.c}, and put @code{@var{xxx}-xdep.o}
-into @code{XDEPFILES}.
+The first time a comamnd is used the user will be warned and offered a
+replacement (if one exists). Note that the replacement string passed to
+@code{deprecate_cmd} should be the full name of the command, i.e. the
+entire string the user should type at the command line.
-@table @file
-@item ser-bsd.c
-This contains serial line support for Berkeley-derived Unix systems.
+@section Console Printing
-@item ser-go32.c
-This contains serial line support for 32-bit programs running under DOS
-using the GO32 execution environment.
+@section TUI
-@item ser-termios.c
-This contains serial line support for System V-derived Unix systems.
-@end table
+@section libgdb
-Now, you are now ready to try configuring GDB to compile using your system
-as its host. From the top level (above @file{bfd}, @file{gdb}, etc), do:
+@code{libgdb} was an abortive project of years ago. The theory was to
+provide an API to @value{GDBN}'s functionality.
-@example
-./configure @var{xxx} --target=vxworks960
-@end example
+@node Symbol Handling
-This will configure your system to cross-compile for VxWorks on
-the Intel 960, which is probably not what you really want, but it's
-a test case that works at this stage. (You haven't set up to be
-able to debug programs that run @emph{on} @var{xxx} yet.)
+@chapter Symbol Handling
-If this succeeds, you can try building it all with:
+Symbols are a key part of @value{GDBN}'s operation. Symbols include variables,
+functions, and types.
-@example
-make
-@end example
+@section Symbol Reading
+
+@value{GDBN} reads symbols from ``symbol files''. The usual symbol file is the
+file containing the program which @value{GDBN} is debugging. @value{GDBN} can be directed
+to use a different file for symbols (with the @code{symbol-file}
+command), and it can also read more symbols via the ``add-file'' and
+``load'' commands, or while reading symbols from shared libraries.
+
+Symbol files are initially opened by code in @file{symfile.c} using the
+BFD library. BFD identifies the type of the file by examining its
+header. @code{find_sym_fns} then uses this identification to locate a
+set of symbol-reading functions.
+
+Symbol reading modules identify themselves to @value{GDBN} by calling
+@code{add_symtab_fns} during their module initialization. The argument
+to @code{add_symtab_fns} is a @code{struct sym_fns} which contains the
+name (or name prefix) of the symbol format, the length of the prefix,
+and pointers to four functions. These functions are called at various
+times to process symbol-files whose identification matches the specified
+prefix.
-Repeat until the program configures, compiles, links, and runs.
-When run, it won't be able to do much (unless you have a VxWorks/960
-board on your network) but you will know that the host support is
-pretty well done.
+The functions supplied by each module are:
-Good luck! Comments and suggestions about this section are particularly
-welcome; send them to @samp{bug-gdb@@prep.ai.mit.edu}.
+@table @code
+@item @var{xyz}_symfile_init(struct sym_fns *sf)
-@node Native
-@chapter Adding a New Native Configuration
+Called from @code{symbol_file_add} when we are about to read a new
+symbol file. This function should clean up any internal state (possibly
+resulting from half-read previous files, for example) and prepare to
+read a new symbol file. Note that the symbol file which we are reading
+might be a new "main" symbol file, or might be a secondary symbol file
+whose symbols are being added to the existing symbol table.
+
+The argument to @code{@var{xyz}_symfile_init} is a newly allocated
+@code{struct sym_fns} whose @code{bfd} field contains the BFD for the
+new symbol file being read. Its @code{private} field has been zeroed,
+and can be modified as desired. Typically, a struct of private
+information will be @code{malloc}'d, and a pointer to it will be placed
+in the @code{private} field.
+
+There is no result from @code{@var{xyz}_symfile_init}, but it can call
+@code{error} if it detects an unavoidable problem.
-If you are making GDB run native on the @var{xxx} machine, you have
-plenty more work to do. Several files control GDB's configuration for
-native support:
+@item @var{xyz}_new_init()
-@table @file
-@item gdb/config/@var{xarch}/@var{xxx}.mh
-Specifies Makefile fragments needed when hosting @emph{or native}
-on machine @var{xxx}.
-In particular, this lists the required native-dependent object files,
-by defining @samp{NATDEPFILES=@dots{}}. Also
-specifies the header file which describes native support on @var{xxx},
-by defining @samp{NAT_FILE= nm-@var{xxx}.h}.
-You can also define @samp{NAT_CFLAGS},
-@samp{NAT_ADD_FILES}, @samp{NAT_CLIBS}, @samp{NAT_CDEPS},
-etc.; see @file{Makefile.in}.
+Called from @code{symbol_file_add} when discarding existing symbols.
+This function need only handle the symbol-reading module's internal
+state; the symbol table data structures visible to the rest of @value{GDBN} will
+be discarded by @code{symbol_file_add}. It has no arguments and no
+result. It may be called after @code{@var{xyz}_symfile_init}, if a new
+symbol table is being read, or may be called alone if all symbols are
+simply being discarded.
-@item gdb/config/@var{arch}/nm-@var{xxx}.h
-(@file{nm.h} is a link to this file, created by configure).
-Contains C macro definitions describing the native system environment,
-such as child process control and core file support.
-Crib from existing @file{nm-*.h} files to create a new one.
+@item @var{xyz}_symfile_read(struct sym_fns *sf, CORE_ADDR addr, int mainline)
+
+Called from @code{symbol_file_add} to actually read the symbols from a
+symbol-file into a set of psymtabs or symtabs.
-@item gdb/@var{xxx}-nat.c
-Contains any miscellaneous C code required for this native support
-of this machine. On some machines it doesn't exist at all.
+@code{sf} points to the struct sym_fns originally passed to
+@code{@var{xyz}_sym_init} for possible initialization. @code{addr} is
+the offset between the file's specified start address and its true
+address in memory. @code{mainline} is 1 if this is the main symbol
+table being read, and 0 if a secondary symbol file (e.g. shared library
+or dynamically loaded file) is being read.@refill
@end table
-@subheading Generic Native Support Files
+In addition, if a symbol-reading module creates psymtabs when
+@var{xyz}_symfile_read is called, these psymtabs will contain a pointer
+to a function @code{@var{xyz}_psymtab_to_symtab}, which can be called
+from any point in the @value{GDBN} symbol-handling code.
-There are some ``generic'' versions of routines that can be used by
-various systems. These can be customized in various ways by macros
-defined in your @file{nm-@var{xxx}.h} file. If these routines work for
-the @var{xxx} host, you can just include the generic file's name (with
-@samp{.o}, not @samp{.c}) in @code{NATDEPFILES}.
+@table @code
+@item @var{xyz}_psymtab_to_symtab (struct partial_symtab *pst)
+
+Called from @code{psymtab_to_symtab} (or the PSYMTAB_TO_SYMTAB macro) if
+the psymtab has not already been read in and had its @code{pst->symtab}
+pointer set. The argument is the psymtab to be fleshed-out into a
+symtab. Upon return, pst->readin should have been set to 1, and
+pst->symtab should contain a pointer to the new corresponding symtab, or
+zero if there were no symbols in that part of the symbol file.
+@end table
-Otherwise, if your machine needs custom support routines, you will need
-to write routines that perform the same functions as the generic file.
-Put them into @code{@var{xxx}-nat.c}, and put @code{@var{xxx}-nat.o}
-into @code{NATDEPFILES}.
+@section Partial Symbol Tables
-@table @file
+@value{GDBN} has three types of symbol tables.
-@item inftarg.c
-This contains the @emph{target_ops vector} that supports Unix child
-processes on systems which use ptrace and wait to control the child.
+@itemize @bullet
-@item procfs.c
-This contains the @emph{target_ops vector} that supports Unix child
-processes on systems which use /proc to control the child.
+@item full symbol tables (symtabs). These contain the main information
+about symbols and addresses.
-@item fork-child.c
-This does the low-level grunge that uses Unix system calls
-to do a "fork and exec" to start up a child process.
+@item partial symbol tables (psymtabs). These contain enough
+information to know when to read the corresponding part of the full
+symbol table.
-@item infptrace.c
-This is the low level interface to inferior processes for systems
-using the Unix @code{ptrace} call in a vanilla way.
+@item minimal symbol tables (msymtabs). These contain information
+gleaned from non-debugging symbols.
-@item coredep.c::fetch_core_registers()
-Support for reading registers out of a core file. This routine calls
-@code{register_addr()}, see below.
-Now that BFD is used to read core files, virtually all machines should
-use @code{coredep.c}, and should just provide @code{fetch_core_registers} in
-@code{@var{xxx}-nat.c} (or @code{REGISTER_U_ADDR} in @code{nm-@var{xxx}.h}).
+@end itemize
-@item coredep.c::register_addr()
-If your @code{nm-@var{xxx}.h} file defines the macro
-@code{REGISTER_U_ADDR(addr, blockend, regno)}, it should be defined to
-set @code{addr} to the offset within the @samp{user}
-struct of GDB register number @code{regno}. @code{blockend} is the
-offset within the ``upage'' of @code{u.u_ar0}.
-If @code{REGISTER_U_ADDR} is defined,
-@file{coredep.c} will define the @code{register_addr()} function and use
-the macro in it. If you do not define @code{REGISTER_U_ADDR}, but you
-are using the standard @code{fetch_core_registers()}, you will need to
-define your own version of @code{register_addr()}, put it into your
-@code{@var{xxx}-nat.c} file, and be sure @code{@var{xxx}-nat.o} is in
-the @code{NATDEPFILES} list. If you have your own
-@code{fetch_core_registers()}, you may not need a separate
-@code{register_addr()}. Many custom @code{fetch_core_registers()}
-implementations simply locate the registers themselves.@refill
-@end table
+This section describes partial symbol tables.
-When making GDB run native on a new operating system,
-to make it possible to debug
-core files, you will need to either write specific code for parsing your
-OS's core files, or customize @file{bfd/trad-core.c}. First, use
-whatever @code{#include} files your machine uses to define the struct of
-registers that is accessible (possibly in the u-area) in a core file
-(rather than @file{machine/reg.h}), and an include file that defines whatever
-header exists on a core file (e.g. the u-area or a @samp{struct core}). Then
-modify @code{trad_unix_core_file_p()} to use these values to set up the
-section information for the data segment, stack segment, any other
-segments in the core file (perhaps shared library contents or control
-information), ``registers'' segment, and if there are two discontiguous
-sets of registers (e.g. integer and float), the ``reg2'' segment. This
-section information basically delimits areas in the core file in a
-standard way, which the section-reading routines in BFD know how to seek
-around in.
+A psymtab is constructed by doing a very quick pass over an executable
+file's debugging information. Small amounts of information are
+extracted -- enough to identify which parts of the symbol table will
+need to be re-read and fully digested later, when the user needs the
+information. The speed of this pass causes @value{GDBN} to start up very
+quickly. Later, as the detailed rereading occurs, it occurs in small
+pieces, at various times, and the delay therefrom is mostly invisible to
+the user.
+@c (@xref{Symbol Reading}.)
-Then back in GDB, you need a matching routine called
-@code{fetch_core_registers()}. If you can use the generic one, it's in
-@file{coredep.c}; if not, it's in your @file{@var{xxx}-nat.c} file.
-It will be passed a char pointer to the entire ``registers'' segment,
-its length, and a zero; or a char pointer to the entire ``regs2''
-segment, its length, and a 2. The routine should suck out the supplied
-register values and install them into GDB's ``registers'' array.
-(@xref{New Architectures,,Defining a New Host or Target Architecture},
-for more info about this.)
+The symbols that show up in a file's psymtab should be, roughly, those
+visible to the debugger's user when the program is not running code from
+that file. These include external symbols and types, static symbols and
+types, and enum values declared at file scope.
-If your system uses @file{/proc} to control processes, and uses ELF
-format core files, then you may be able to use the same routines
-for reading the registers out of processes and out of core files.
+The psymtab also contains the range of instruction addresses that the
+full symbol table would represent.
-@node Target
-@chapter Adding a New Target
+The idea is that there are only two ways for the user (or much of the
+code in the debugger) to reference a symbol:
-For a new target called @var{ttt}, first specify the configuration as
-described in @ref{Config,,Adding a New Configuration}. If your new
-target is the same as your new host, you've probably already done that.
+@itemize @bullet
-A variety of files specify attributes of the GDB target environment:
+@item by its address
+(e.g. execution stops at some address which is inside a function in this
+file). The address will be noticed to be in the range of this psymtab,
+and the full symtab will be read in. @code{find_pc_function},
+@code{find_pc_line}, and other @code{find_pc_@dots{}} functions handle
+this.
-@table @file
-@item gdb/config/@var{arch}/@var{ttt}.mt
-Contains a Makefile fragment specific to this target.
-Specifies what object files are needed for target @var{ttt}, by
-defining @samp{TDEPFILES=@dots{}}.
-Also specifies the header file which describes @var{ttt}, by defining
-@samp{TM_FILE= tm-@var{ttt}.h}. You can also define @samp{TM_CFLAGS},
-@samp{TM_CLIBS}, @samp{TM_CDEPS},
-and other Makefile variables here; see @file{Makefile.in}.
+@item by its name
+(e.g. the user asks to print a variable, or set a breakpoint on a
+function). Global names and file-scope names will be found in the
+psymtab, which will cause the symtab to be pulled in. Local names will
+have to be qualified by a global name, or a file-scope name, in which
+case we will have already read in the symtab as we evaluated the
+qualifier. Or, a local symbol can be referenced when we are "in" a
+local scope, in which case the first case applies. @code{lookup_symbol}
+does most of the work here.
-@item gdb/config/@var{arch}/tm-@var{ttt}.h
-(@file{tm.h} is a link to this file, created by configure).
-Contains macro definitions about the target machine's
-registers, stack frame format and instructions.
-Crib from existing @file{tm-*.h} files when building a new one.
+@end itemize
-@item gdb/@var{ttt}-tdep.c
-Contains any miscellaneous code required for this target machine.
-On some machines it doesn't exist at all. Sometimes the macros
-in @file{tm-@var{ttt}.h} become very complicated, so they are
-implemented as functions here instead, and the macro is simply
-defined to call the function.
-
-@item gdb/exec.c
-Defines functions for accessing files that are
-executable on the target system. These functions open and examine an
-exec file, extract data from one, write data to one, print information
-about one, etc. Now that executable files are handled with BFD, every
-target should be able to use the generic exec.c rather than its
-own custom code.
-
-@item gdb/@var{arch}-pinsn.c
-Prints (disassembles) the target machine's instructions.
-This file is usually shared with other target machines which use the
-same processor, which is why it is @file{@var{arch}-pinsn.c} rather
-than @file{@var{ttt}-pinsn.c}.
-
-@item gdb/@var{arch}-opcode.h
-Contains some large initialized
-data structures describing the target machine's instructions.
-This is a bit strange for a @file{.h} file, but it's OK since
-it is only included in one place. @file{@var{arch}-opcode.h} is shared
-between the debugger and the assembler, if the GNU assembler has been
-ported to the target machine.
+The only reason that psymtabs exist is to cause a symtab to be read in
+at the right moment. Any symbol that can be elided from a psymtab,
+while still causing that to happen, should not appear in it. Since
+psymtabs don't have the idea of scope, you can't put local symbols in
+them anyway. Psymtabs don't have the idea of the type of a symbol,
+either, so types need not appear, unless they will be referenced by
+name.
-@item gdb/config/@var{arch}/tm-@var{arch}.h
-This often exists to describe the basic layout of the target machine's
-processor chip (registers, stack, etc).
-If used, it is included by @file{tm-@var{xxx}.h}. It can
-be shared among many targets that use the same processor.
+It is a bug for @value{GDBN} to behave one way when only a psymtab has been read,
+and another way if the corresponding symtab has been read in. Such bugs
+are typically caused by a psymtab that does not contain all the visible
+symbols, or which has the wrong instruction address ranges.
-@item gdb/@var{arch}-tdep.c
-Similarly, there are often common subroutines that are shared by all
-target machines that use this particular architecture.
-@end table
+The psymtab for a particular section of a symbol-file (objfile) could be
+thrown away after the symtab has been read in. The symtab should always
+be searched before the psymtab, so the psymtab will never be used (in a
+bug-free environment). Currently, psymtabs are allocated on an obstack,
+and all the psymbols themselves are allocated in a pair of large arrays
+on an obstack, so there is little to be gained by trying to free them
+unless you want to do a lot more work.
-When adding support for a new target machine, there are various areas
-of support that might need change, or might be OK.
+@section Types
-If you are using an existing object file format (a.out or COFF),
-there is probably little to be done. See @file{bfd/doc/bfd.texinfo}
-for more information on writing new a.out or COFF versions.
+Fundamental Types (e.g., FT_VOID, FT_BOOLEAN).
-If you need to add a new object file format, you must first add it to
-BFD. This is beyond the scope of this document right now. Basically
-you must build a transfer vector (of type @code{bfd_target}), which will
-mean writing all the required routines, and add it to the list in
-@file{bfd/targets.c}.
+These are the fundamental types that @value{GDBN} uses internally. Fundamental
+types from the various debugging formats (stabs, ELF, etc) are mapped
+into one of these. They are basically a union of all fundamental types
+that gdb knows about for all the languages that @value{GDBN} knows about.
-You must then arrange for the BFD code to provide access to the
-debugging symbols. Generally GDB will have to call swapping routines
-from BFD and a few other BFD internal routines to locate the debugging
-information. As much as possible, GDB should not depend on the BFD
-internal data structures.
+Type Codes (e.g., TYPE_CODE_PTR, TYPE_CODE_ARRAY).
-For some targets (e.g., COFF), there is a special transfer vector used
-to call swapping routines, since the external data structures on various
-platforms have different sizes and layouts. Specialized routines that
-will only ever be implemented by one object file format may be called
-directly. This interface should be described in a file
-@file{bfd/libxxx.h}, which is included by GDB.
+Each time @value{GDBN} builds an internal type, it marks it with one of these
+types. The type may be a fundamental type, such as TYPE_CODE_INT, or a
+derived type, such as TYPE_CODE_PTR which is a pointer to another type.
+Typically, several FT_* types map to one TYPE_CODE_* type, and are
+distinguished by other members of the type struct, such as whether the
+type is signed or unsigned, and how many bits it uses.
-If you are adding a new operating system for an existing CPU chip, add a
-@file{tm-@var{xos}.h} file that describes the operating system
-facilities that are unusual (extra symbol table info; the breakpoint
-instruction needed; etc). Then write a
-@file{tm-@var{xarch}-@var{xos}.h} that just @code{#include}s
-@file{tm-@var{xarch}.h} and @file{tm-@var{xos}.h}. (Now that we have
-three-part configuration names, this will probably get revised to
-separate the @var{xos} configuration from the @var{xarch}
-configuration.)
+Builtin Types (e.g., builtin_type_void, builtin_type_char).
+These are instances of type structs that roughly correspond to
+fundamental types and are created as global types for @value{GDBN} to use for
+various ugly historical reasons. We eventually want to eliminate these.
+Note for example that builtin_type_int initialized in gdbtypes.c is
+basically the same as a TYPE_CODE_INT type that is initialized in
+c-lang.c for an FT_INTEGER fundamental type. The difference is that the
+builtin_type is not associated with any particular objfile, and only one
+instance exists, while c-lang.c builds as many TYPE_CODE_INT types as
+needed, with each one associated with some particular objfile.
-@node Languages
-@chapter Adding a Source Language to GDB
+@section Object File Formats
-To add other languages to GDB's expression parser, follow the following steps:
+@subsection a.out
-@table @emph
-@item Create the expression parser.
+The @file{a.out} format is the original file format for Unix. It
+consists of three sections: text, data, and bss, which are for program
+code, initialized data, and uninitialized data, respectively.
-This should reside in a file @file{@var{lang}-exp.y}. Routines for building
-parsed expressions into a @samp{union exp_element} list are in @file{parse.c}.
+The @file{a.out} format is so simple that it doesn't have any reserved
+place for debugging information. (Hey, the original Unix hackers used
+@file{adb}, which is a machine-language debugger.) The only debugging
+format for @file{a.out} is stabs, which is encoded as a set of normal
+symbols with distinctive attributes.
-Since we can't depend upon everyone having Bison, and YACC produces
-parsers that define a bunch of global names, the following lines
-@emph{must} be included at the top of the YACC parser, to prevent
-the various parsers from defining the same global names:
+The basic @file{a.out} reader is in @file{dbxread.c}.
-@example
-#define yyparse @var{lang}_parse
-#define yylex @var{lang}_lex
-#define yyerror @var{lang}_error
-#define yylval @var{lang}_lval
-#define yychar @var{lang}_char
-#define yydebug @var{lang}_debug
-#define yypact @var{lang}_pact
-#define yyr1 @var{lang}_r1
-#define yyr2 @var{lang}_r2
-#define yydef @var{lang}_def
-#define yychk @var{lang}_chk
+@subsection COFF
+
+The COFF format was introduced with System V Release 3 (SVR3) Unix.
+COFF files may have multiple sections, each prefixed by a header. The
+number of sections is limited.
+
+The COFF specification includes support for debugging. Although this
+was a step forward, the debugging information was woefully limited. For
+instance, it was not possible to represent code that came from an
+included file.
+
+The COFF reader is in @file{coffread.c}.
+
+@subsection ECOFF
+
+ECOFF is an extended COFF originally introduced for Mips and Alpha
+workstations.
+
+The basic ECOFF reader is in @file{mipsread.c}.
+
+@subsection XCOFF
+
+The IBM RS/6000 running AIX uses an object file format called XCOFF.
+The COFF sections, symbols, and line numbers are used, but debugging
+symbols are dbx-style stabs whose strings are located in the
+@samp{.debug} section (rather than the string table). For more
+information, see @xref{Top,,,stabs,The Stabs Debugging Format}.
+
+The shared library scheme has a clean interface for figuring out what
+shared libraries are in use, but the catch is that everything which
+refers to addresses (symbol tables and breakpoints at least) needs to be
+relocated for both shared libraries and the main executable. At least
+using the standard mechanism this can only be done once the program has
+been run (or the core file has been read).
+
+@subsection PE
+
+Windows 95 and NT use the PE (Portable Executable) format for their
+executables. PE is basically COFF with additional headers.
+
+While BFD includes special PE support, @value{GDBN} needs only the basic
+COFF reader.
+
+@subsection ELF
+
+The ELF format came with System V Release 4 (SVR4) Unix. ELF is similar
+to COFF in being organized into a number of sections, but it removes
+many of COFF's limitations.
+
+The basic ELF reader is in @file{elfread.c}.
+
+@subsection SOM
+
+SOM is HP's object file and debug format (not to be confused with IBM's
+SOM, which is a cross-language ABI).
+
+The SOM reader is in @file{hpread.c}.
+
+@subsection Other File Formats
+
+Other file formats that have been supported by @value{GDBN} include Netware
+Loadable Modules (@file{nlmread.c}.
+
+@section Debugging File Formats
+
+This section describes characteristics of debugging information that
+are independent of the object file format.
+
+@subsection stabs
+
+@code{stabs} started out as special symbols within the @code{a.out}
+format. Since then, it has been encapsulated into other file
+formats, such as COFF and ELF.
+
+While @file{dbxread.c} does some of the basic stab processing,
+including for encapsulated versions, @file{stabsread.c} does
+the real work.
+
+@subsection COFF
+
+The basic COFF definition includes debugging information. The level
+of support is minimal and non-extensible, and is not often used.
+
+@subsection Mips debug (Third Eye)
+
+ECOFF includes a definition of a special debug format.
+
+The file @file{mdebugread.c} implements reading for this format.
+
+@subsection DWARF 1
+
+DWARF 1 is a debugging format that was originally designed to be
+used with ELF in SVR4 systems.
+
+@c CHILL_PRODUCER
+@c GCC_PRODUCER
+@c GPLUS_PRODUCER
+@c LCC_PRODUCER
+@c If defined, these are the producer strings in a DWARF 1 file. All of
+@c these have reasonable defaults already.
+
+The DWARF 1 reader is in @file{dwarfread.c}.
+
+@subsection DWARF 2
+
+DWARF 2 is an improved but incompatible version of DWARF 1.
+
+The DWARF 2 reader is in @file{dwarf2read.c}.
+
+@subsection SOM
+
+Like COFF, the SOM definition includes debugging information.
+
+@section Adding a New Symbol Reader to @value{GDBN}
+
+If you are using an existing object file format (a.out, COFF, ELF, etc),
+there is probably little to be done.
+
+If you need to add a new object file format, you must first add it to
+BFD. This is beyond the scope of this document.
+
+You must then arrange for the BFD code to provide access to the
+debugging symbols. Generally @value{GDBN} will have to call swapping routines
+from BFD and a few other BFD internal routines to locate the debugging
+information. As much as possible, @value{GDBN} should not depend on the BFD
+internal data structures.
+
+For some targets (e.g., COFF), there is a special transfer vector used
+to call swapping routines, since the external data structures on various
+platforms have different sizes and layouts. Specialized routines that
+will only ever be implemented by one object file format may be called
+directly. This interface should be described in a file
+@file{bfd/libxyz.h}, which is included by @value{GDBN}.
+
+
+@node Language Support
+
+@chapter Language Support
+
+@value{GDBN}'s language support is mainly driven by the symbol reader, although
+it is possible for the user to set the source language manually.
+
+@value{GDBN} chooses the source language by looking at the extension of the file
+recorded in the debug info; @code{.c} means C, @code{.f} means Fortran,
+etc. It may also use a special-purpose language identifier if the debug
+format supports it, such as DWARF.
+
+@section Adding a Source Language to @value{GDBN}
+
+To add other languages to @value{GDBN}'s expression parser, follow the following
+steps:
+
+@table @emph
+@item Create the expression parser.
+
+This should reside in a file @file{@var{lang}-exp.y}. Routines for
+building parsed expressions into a @samp{union exp_element} list are in
+@file{parse.c}.
+
+Since we can't depend upon everyone having Bison, and YACC produces
+parsers that define a bunch of global names, the following lines
+@emph{must} be included at the top of the YACC parser, to prevent the
+various parsers from defining the same global names:
+
+@example
+#define yyparse @var{lang}_parse
+#define yylex @var{lang}_lex
+#define yyerror @var{lang}_error
+#define yylval @var{lang}_lval
+#define yychar @var{lang}_char
+#define yydebug @var{lang}_debug
+#define yypact @var{lang}_pact
+#define yyr1 @var{lang}_r1
+#define yyr2 @var{lang}_r2
+#define yydef @var{lang}_def
+#define yychk @var{lang}_chk
#define yypgo @var{lang}_pgo
#define yyact @var{lang}_act
#define yyexca @var{lang}_exca
At the bottom of your parser, define a @code{struct language_defn} and
initialize it with the right values for your language. Define an
@code{initialize_@var{lang}} routine and have it call
-@samp{add_language(@var{lang}_language_defn)} to tell the rest of GDB
+@samp{add_language(@var{lang}_language_defn)} to tell the rest of @value{GDBN}
that your language exists. You'll need some other supporting variables
and functions, which will be used via pointers from your
@code{@var{lang}_language_defn}. See the declaration of @code{struct
Add an enumerated identifier for your language to the enumerated type
@code{enum language} in @file{defs.h}.
-Update the routines in @file{language.c} so your language is included. These
-routines include type predicates and such, which (in some cases) are
-language dependent. If your language does not appear in the switch
+Update the routines in @file{language.c} so your language is included.
+These routines include type predicates and such, which (in some cases)
+are language dependent. If your language does not appear in the switch
statement, an error is reported.
Also included in @file{language.c} is the code that updates the variable
@code{language_@var{lang}} enumerated identifier into a printable
string.
-Update the function @code{_initialize_language} to include your language. This
-function picks the default language upon startup, so is dependent upon
-which languages that GDB is built for.
+Update the function @code{_initialize_language} to include your
+language. This function picks the default language upon startup, so is
+dependent upon which languages that @value{GDBN} is built for.
Update @code{allocate_symtab} in @file{symfile.c} and/or symbol-reading
code so that the language of each symtab (source file) is set properly.
@item Use macros to trim code
-The user has the option of building GDB for some or all of the
-languages. If the user decides to build GDB for the language
+The user has the option of building @value{GDBN} for some or all of the
+languages. If the user decides to build @value{GDBN} for the language
@var{lang}, then every file dependent on @file{language.h} will have the
macro @code{_LANG_@var{lang}} defined in it. Use @code{#ifdef}s to
leave out large routines that the user won't need if he or she is not
using your language.
-Note that you do not need to do this in your YACC parser, since if GDB
+Note that you do not need to do this in your YACC parser, since if @value{GDBN}
is not build for @var{lang}, then @file{@var{lang}-exp.tab.o} (the
-compiled form of your parser) is not linked into GDB at all.
+compiled form of your parser) is not linked into @value{GDBN} at all.
-See the file @file{configure.in} for how GDB is configured for different
+See the file @file{configure.in} for how @value{GDBN} is configured for different
languages.
@item Edit @file{Makefile.in}
variables such as @code{HFILES} and @code{OBJS}, otherwise your code may
not get linked in, or, worse yet, it may not get @code{tar}red into the
distribution!
+
@end table
-@node Releases
-@chapter Configuring GDB for Release
+@node Host Definition
-From the top level directory (containing @file{gdb}, @file{bfd},
-@file{libiberty}, and so on):
-@example
-make -f Makefile.in gdb.tar.Z
-@end example
+@chapter Host Definition
-This will properly configure, clean, rebuild any files that are
-distributed pre-built (e.g. @file{c-exp.tab.c} or @file{refcard.ps}),
-and will then make a tarfile. (If the top level directory has already
-beenn configured, you can just do @code{make gdb.tar.Z} instead.)
+With the advent of autoconf, it's rarely necessary to have host
+definition machinery anymore.
-This procedure requires:
-@itemize @bullet
-@item symbolic links
-@item @code{makeinfo} (texinfo2 level)
-@item @TeX{}
-@item @code{dvips}
-@item @code{yacc} or @code{bison}
-@end itemize
-@noindent
-@dots{} and the usual slew of utilities (@code{sed}, @code{tar}, etc.).
+@section Adding a New Host
-@subheading TEMPORARY RELEASE PROCEDURE FOR DOCUMENTATION
+Most of @value{GDBN}'s host configuration support happens via autoconf. It
+should be rare to need new host-specific definitions. @value{GDBN} still uses
+the host-specific definitions and files listed below, but these mostly
+exist for historical reasons, and should eventually disappear.
-@file{gdb.texinfo} is currently marked up using the texinfo-2 macros,
-which are not yet a default for anything (but we have to start using
-them sometime).
+Several files control @value{GDBN}'s configuration for host systems:
-For making paper, the only thing this implies is the right generation of
-@file{texinfo.tex} needs to be included in the distribution.
+@table @file
-For making info files, however, rather than duplicating the texinfo2
-distribution, generate @file{gdb-all.texinfo} locally, and include the files
-@file{gdb.info*} in the distribution. Note the plural; @code{makeinfo} will
-split the document into one overall file and five or so included files.
+@item gdb/config/@var{arch}/@var{xyz}.mh
+Specifies Makefile fragments needed when hosting on machine @var{xyz}.
+In particular, this lists the required machine-dependent object files,
+by defining @samp{XDEPFILES=@dots{}}. Also specifies the header file
+which describes host @var{xyz}, by defining @code{XM_FILE=
+xm-@var{xyz}.h}. You can also define @code{CC}, @code{SYSV_DEFINE},
+@code{XM_CFLAGS}, @code{XM_ADD_FILES}, @code{XM_CLIBS}, @code{XM_CDEPS},
+etc.; see @file{Makefile.in}.
+@item gdb/config/@var{arch}/xm-@var{xyz}.h
+(@file{xm.h} is a link to this file, created by configure). Contains C
+macro definitions describing the host system environment, such as byte
+order, host C compiler and library.
-@node Partial Symbol Tables
-@chapter Partial Symbol Tables
+@item gdb/@var{xyz}-xdep.c
+Contains any miscellaneous C code required for this machine as a host.
+On most machines it doesn't exist at all. If it does exist, put
+@file{@var{xyz}-xdep.o} into the @code{XDEPFILES} line in
+@file{gdb/config/@var{arch}/@var{xyz}.mh}.
-GDB has three types of symbol tables.
+@end table
-@itemize @bullet
-@item full symbol tables (symtabs). These contain the main
-information about symbols and addresses.
-@item partial symbol tables (psymtabs). These contain enough
-information to know when to read the corresponding
-part of the full symbol table.
-@item minimal symbol tables (msymtabs). These contain information
-gleaned from non-debugging symbols.
-@end itemize
+@subheading Generic Host Support Files
-This section describes partial symbol tables.
+There are some ``generic'' versions of routines that can be used by
+various systems. These can be customized in various ways by macros
+defined in your @file{xm-@var{xyz}.h} file. If these routines work for
+the @var{xyz} host, you can just include the generic file's name (with
+@samp{.o}, not @samp{.c}) in @code{XDEPFILES}.
-A psymtab is constructed by doing a very quick pass over an executable
-file's debugging information. Small amounts of information are
-extracted -- enough to identify which parts of the symbol table will
-need to be re-read and fully digested later, when the user needs the
-information. The speed of this pass causes GDB to start up very
-quickly. Later, as the detailed rereading occurs, it occurs in small
-pieces, at various times, and the delay therefrom is mostly invisible to
-the user. (@xref{Symbol Reading}.)
+Otherwise, if your machine needs custom support routines, you will need
+to write routines that perform the same functions as the generic file.
+Put them into @code{@var{xyz}-xdep.c}, and put @code{@var{xyz}-xdep.o}
+into @code{XDEPFILES}.
-The symbols that show up in a file's psymtab should be, roughly, those
-visible to the debugger's user when the program is not running code from
-that file. These include external symbols and types, static
-symbols and types, and enum values declared at file scope.
+@table @file
-The psymtab also contains the range of instruction addresses that the
-full symbol table would represent.
+@item ser-unix.c
+This contains serial line support for Unix systems. This is always
+included, via the makefile variable @code{SER_HARDWIRE}; override this
+variable in the @file{.mh} file to avoid it.
-The idea is that there are only two ways for the user (or much of
-the code in the debugger) to reference a symbol:
+@item ser-go32.c
+This contains serial line support for 32-bit programs running under DOS,
+using the GO32 execution environment.
-@itemize @bullet
+@item ser-tcp.c
+This contains generic TCP support using sockets.
-@item by its address
-(e.g. execution stops at some address which is inside a function
-in this file). The address will be noticed to be in the
-range of this psymtab, and the full symtab will be read in.
-@code{find_pc_function}, @code{find_pc_line}, and other @code{find_pc_@dots{}}
-functions handle this.
+@end table
-@item by its name
-(e.g. the user asks to print a variable, or set a breakpoint on a
-function). Global names and file-scope names will be found in the
-psymtab, which will cause the symtab to be pulled in. Local names will
-have to be qualified by a global name, or a file-scope name, in which
-case we will have already read in the symtab as we evaluated the
-qualifier. Or, a local symbol can be referenced when
-we are "in" a local scope, in which case the first case applies.
-@code{lookup_symbol} does most of the work here.
+@section Host Conditionals
-@end itemize
+When @value{GDBN} is configured and compiled, various macros are defined or left
+undefined, to control compilation based on the attributes of the host
+system. These macros and their meanings (or if the meaning is not
+documented here, then one of the source files where they are used is
+indicated) are:
-The only reason that psymtabs exist is to cause a symtab to be read in
-at the right moment. Any symbol that can be elided from a psymtab,
-while still causing that to happen, should not appear in it. Since
-psymtabs don't have the idea of scope, you can't put local symbols in
-them anyway. Psymtabs don't have the idea of the type of a symbol,
-either, so types need not appear, unless they will be referenced by
-name.
+@table @code
-It is a bug for GDB to behave one way when only a psymtab has been read,
-and another way if the corresponding symtab has been read in. Such
-bugs are typically caused by a psymtab that does not contain all the
-visible symbols, or which has the wrong instruction address ranges.
+@item @value{GDBN}INIT_FILENAME
+The default name of @value{GDBN}'s initialization file (normally @file{.gdbinit}).
-The psymtab for a particular section of a symbol-file (objfile)
-could be thrown away after the symtab has been read in. The symtab
-should always be searched before the psymtab, so the psymtab will
-never be used (in a bug-free environment). Currently,
-psymtabs are allocated on an obstack, and all the psymbols themselves
-are allocated in a pair of large arrays on an obstack, so there is
-little to be gained by trying to free them unless you want to do a lot
-more work.
+@item MEM_FNS_DECLARED
+Your host config file defines this if it includes declarations of
+@code{memcpy} and @code{memset}. Define this to avoid conflicts between
+the native include files and the declarations in @file{defs.h}.
-@node Types
-@chapter Types
+@item NO_STD_REGS
+This macro is deprecated.
-Fundamental Types (e.g., FT_VOID, FT_BOOLEAN).
+@item NO_SYS_FILE
+Define this if your system does not have a @code{<sys/file.h>}.
-These are the fundamental types that gdb uses internally. Fundamental
-types from the various debugging formats (stabs, ELF, etc) are mapped into
-one of these. They are basically a union of all fundamental types that
-gdb knows about for all the languages that gdb knows about.
+@item SIGWINCH_HANDLER
+If your host defines @code{SIGWINCH}, you can define this to be the name
+of a function to be called if @code{SIGWINCH} is received.
-Type Codes (e.g., TYPE_CODE_PTR, TYPE_CODE_ARRAY).
+@item SIGWINCH_HANDLER_BODY
+Define this to expand into code that will define the function named by
+the expansion of @code{SIGWINCH_HANDLER}.
-Each time gdb builds an internal type, it marks it with one of these
-types. The type may be a fundamental type, such as TYPE_CODE_INT, or
-a derived type, such as TYPE_CODE_PTR which is a pointer to another
-type. Typically, several FT_* types map to one TYPE_CODE_* type, and
-are distinguished by other members of the type struct, such as whether
-the type is signed or unsigned, and how many bits it uses.
+@item ALIGN_STACK_ON_STARTUP
+Define this if your system is of a sort that will crash in
+@code{tgetent} if the stack happens not to be longword-aligned when
+@code{main} is called. This is a rare situation, but is known to occur
+on several different types of systems.
+
+@item CRLF_SOURCE_FILES
+Define this if host files use @code{\r\n} rather than @code{\n} as a
+line terminator. This will cause source file listings to omit @code{\r}
+characters when printing and it will allow \r\n line endings of files
+which are "sourced" by gdb. It must be possible to open files in binary
+mode using @code{O_BINARY} or, for fopen, @code{"rb"}.
-Builtin Types (e.g., builtin_type_void, builtin_type_char).
+@item DEFAULT_PROMPT
+The default value of the prompt string (normally @code{"(gdb) "}).
-These are instances of type structs that roughly correspond to fundamental
-types and are created as global types for gdb to use for various ugly
-historical reasons. We eventually want to eliminate these. Note for
-example that builtin_type_int initialized in gdbtypes.c is basically the
-same as a TYPE_CODE_INT type that is initialized in c-lang.c for an
-FT_INTEGER fundamental type. The difference is that the builtin_type is
-not associated with any particular objfile, and only one instance exists,
-while c-lang.c builds as many TYPE_CODE_INT types as needed, with each
-one associated with some particular objfile.
+@item DEV_TTY
+The name of the generic TTY device, defaults to @code{"/dev/tty"}.
-@node BFD support for GDB
-@chapter Binary File Descriptor Library Support for GDB
+@item FCLOSE_PROVIDED
+Define this if the system declares @code{fclose} in the headers included
+in @code{defs.h}. This isn't needed unless your compiler is unusually
+anal.
-BFD provides support for GDB in several ways:
+@item FOPEN_RB
+Define this if binary files are opened the same way as text files.
-@table @emph
-@item identifying executable and core files
-BFD will identify a variety of file types, including a.out, coff, and
-several variants thereof, as well as several kinds of core files.
+@item GETENV_PROVIDED
+Define this if the system declares @code{getenv} in its headers included
+in @code{defs.h}. This isn't needed unless your compiler is unusually
+anal.
-@item access to sections of files
-BFD parses the file headers to determine the names, virtual addresses,
-sizes, and file locations of all the various named sections in files
-(such as the text section or the data section). GDB simply calls
-BFD to read or write section X at byte offset Y for length Z.
+@item HAVE_MMAP
+In some cases, use the system call @code{mmap} for reading symbol
+tables. For some machines this allows for sharing and quick updates.
-@item specialized core file support
-BFD provides routines to determine the failing command name stored
-in a core file, the signal with which the program failed, and whether
-a core file matches (i.e. could be a core dump of) a particular executable
-file.
+@item HAVE_SIGSETMASK
+Define this if the host system has job control, but does not define
+@code{sigsetmask()}. Currently, this is only true of the RS/6000.
-@item locating the symbol information
-GDB uses an internal interface of BFD to determine where to find the
-symbol information in an executable file or symbol-file. GDB itself
-handles the reading of symbols, since BFD does not ``understand'' debug
-symbols, but GDB uses BFD's cached information to find the symbols,
-string table, etc.
-@end table
+@item HAVE_TERMIO
+Define this if the host system has @code{termio.h}.
-@c The interface for symbol reading is described in @ref{Symbol
-@c Reading,,Symbol Reading}.
+@item HOST_BYTE_ORDER
+The ordering of bytes in the host. This must be defined to be either
+@code{BIG_ENDIAN} or @code{LITTLE_ENDIAN}.
+@item INT_MAX
+@item INT_MIN
+@item LONG_MAX
+@item UINT_MAX
+@item ULONG_MAX
+Values for host-side constants.
-@node Symbol Reading
-@chapter Symbol Reading
+@item ISATTY
+Substitute for isatty, if not available.
-GDB reads symbols from "symbol files". The usual symbol file is the
-file containing the program which gdb is debugging. GDB can be directed
-to use a different file for symbols (with the ``symbol-file''
-command), and it can also read more symbols via the ``add-file'' and ``load''
-commands, or while reading symbols from shared libraries.
+@item LONGEST
+This is the longest integer type available on the host. If not defined,
+it will default to @code{long long} or @code{long}, depending on
+@code{CC_HAS_LONG_LONG}.
-Symbol files are initially opened by @file{symfile.c} using the BFD
-library. BFD identifies the type of the file by examining its header.
-@code{symfile_init} then uses this identification to locate a
-set of symbol-reading functions.
+@item CC_HAS_LONG_LONG
+Define this if the host C compiler supports ``long long''. This is set
+by the configure script.
-Symbol reading modules identify themselves to GDB by calling
-@code{add_symtab_fns} during their module initialization. The argument
-to @code{add_symtab_fns} is a @code{struct sym_fns} which contains
-the name (or name prefix) of the symbol format, the length of the prefix,
-and pointers to four functions. These functions are called at various
-times to process symbol-files whose identification matches the specified
-prefix.
+@item PRINTF_HAS_LONG_LONG
+Define this if the host can handle printing of long long integers via
+the printf format directive ``ll''. This is set by the configure script.
-The functions supplied by each module are:
+@item HAVE_LONG_DOUBLE
+Define this if the host C compiler supports ``long double''. This is
+set by the configure script.
-@table @code
-@item @var{xxx}_symfile_init(struct sym_fns *sf)
+@item PRINTF_HAS_LONG_DOUBLE
+Define this if the host can handle printing of long double float-point
+numbers via the printf format directive ``Lg''. This is set by the
+configure script.
-Called from @code{symbol_file_add} when we are about to read a new
-symbol file. This function should clean up any internal state
-(possibly resulting from half-read previous files, for example)
-and prepare to read a new symbol file. Note that the symbol file
-which we are reading might be a new "main" symbol file, or might
-be a secondary symbol file whose symbols are being added to the
-existing symbol table.
-
-The argument to @code{@var{xxx}_symfile_init} is a newly allocated
-@code{struct sym_fns} whose @code{bfd} field contains the BFD
-for the new symbol file being read. Its @code{private} field
-has been zeroed, and can be modified as desired. Typically,
-a struct of private information will be @code{malloc}'d, and
-a pointer to it will be placed in the @code{private} field.
-
-There is no result from @code{@var{xxx}_symfile_init}, but it can call
-@code{error} if it detects an unavoidable problem.
+@item SCANF_HAS_LONG_DOUBLE
+Define this if the host can handle the parsing of long double
+float-point numbers via the scanf format directive directive
+``Lg''. This is set by the configure script.
-@item @var{xxx}_new_init()
+@item LSEEK_NOT_LINEAR
+Define this if @code{lseek (n)} does not necessarily move to byte number
+@code{n} in the file. This is only used when reading source files. It
+is normally faster to define @code{CRLF_SOURCE_FILES} when possible.
-Called from @code{symbol_file_add} when discarding existing symbols.
-This function need only handle
-the symbol-reading module's internal state; the symbol table data
-structures visible to the rest of GDB will be discarded by
-@code{symbol_file_add}. It has no arguments and no result.
-It may be called after @code{@var{xxx}_symfile_init}, if a new symbol
-table is being read, or may be called alone if all symbols are
-simply being discarded.
+@item L_SET
+This macro is used as the argument to lseek (or, most commonly,
+bfd_seek). FIXME, should be replaced by SEEK_SET instead, which is the
+POSIX equivalent.
-@item @var{xxx}_symfile_read(struct sym_fns *sf, CORE_ADDR addr, int mainline)
+@item MALLOC_INCOMPATIBLE
+Define this if the system's prototype for @code{malloc} differs from the
+@sc{ANSI} definition.
-Called from @code{symbol_file_add} to actually read the symbols from a
-symbol-file into a set of psymtabs or symtabs.
+@item MMAP_BASE_ADDRESS
+When using HAVE_MMAP, the first mapping should go at this address.
-@code{sf} points to the struct sym_fns originally passed to
-@code{@var{xxx}_sym_init} for possible initialization. @code{addr} is the
-offset between the file's specified start address and its true address
-in memory. @code{mainline} is 1 if this is the main symbol table being
-read, and 0 if a secondary symbol file (e.g. shared library or
-dynamically loaded file) is being read.@refill
-@end table
+@item MMAP_INCREMENT
+when using HAVE_MMAP, this is the increment between mappings.
-In addition, if a symbol-reading module creates psymtabs when
-@var{xxx}_symfile_read is called, these psymtabs will contain a pointer to
-a function @code{@var{xxx}_psymtab_to_symtab}, which can be called from
-any point in the GDB symbol-handling code.
+@item NEED_POSIX_SETPGID
+Define this to use the POSIX version of @code{setpgid} to determine
+whether job control is available.
-@table @code
-@item @var{xxx}_psymtab_to_symtab (struct partial_symtab *pst)
-
-Called from @code{psymtab_to_symtab} (or the PSYMTAB_TO_SYMTAB
-macro) if the psymtab has not already been read in and had its
-@code{pst->symtab} pointer set. The argument is the psymtab
-to be fleshed-out into a symtab. Upon return, pst->readin
-should have been set to 1, and pst->symtab should contain a
-pointer to the new corresponding symtab, or zero if there
-were no symbols in that part of the symbol file.
-@end table
+@item NORETURN
+If defined, this should be one or more tokens, such as @code{volatile},
+that can be used in both the declaration and definition of functions to
+indicate that they never return. The default is already set correctly
+if compiling with GCC. This will almost never need to be defined.
+
+@item ATTR_NORETURN
+If defined, this should be one or more tokens, such as
+@code{__attribute__ ((noreturn))}, that can be used in the declarations
+of functions to indicate that they never return. The default is already
+set correctly if compiling with GCC. This will almost never need to be
+defined.
+
+@item USE_GENERIC_DUMMY_FRAMES
+Define this to 1 if the target is using the generic inferior function
+call code. See @code{blockframe.c} for more information.
+
+@item USE_MMALLOC
+@value{GDBN} will use the @code{mmalloc} library for memory allocation for symbol
+reading if this symbol is defined. Be careful defining it since there
+are systems on which @code{mmalloc} does not work for some reason. One
+example is the DECstation, where its RPC library can't cope with our
+redefinition of @code{malloc} to call @code{mmalloc}. When defining
+@code{USE_MMALLOC}, you will also have to set @code{MMALLOC} in the
+Makefile, to point to the mmalloc library. This define is set when you
+configure with --with-mmalloc.
+
+@item NO_MMCHECK
+Define this if you are using @code{mmalloc}, but don't want the overhead
+of checking the heap with @code{mmcheck}. Note that on some systems,
+the C runtime makes calls to malloc prior to calling @code{main}, and if
+@code{free} is ever called with these pointers after calling
+@code{mmcheck} to enable checking, a memory corruption abort is certain
+to occur. These systems can still use mmalloc, but must define
+NO_MMCHECK.
+
+@item MMCHECK_FORCE
+Define this to 1 if the C runtime allocates memory prior to
+@code{mmcheck} being called, but that memory is never freed so we don't
+have to worry about it triggering a memory corruption abort. The
+default is 0, which means that @code{mmcheck} will only install the heap
+checking functions if there has not yet been any memory allocation
+calls, and if it fails to install the functions, gdb will issue a
+warning. This is currently defined if you configure using
+--with-mmalloc.
+@item NO_SIGINTERRUPT
+Define this to indicate that siginterrupt() is not available.
-@node Cleanups
-@chapter Cleanups
+@item R_OK
+Define if this is not in a system .h file.
-Cleanups are a structured way to deal with things that need to be done
-later. When your code does something (like @code{malloc} some memory, or open
-a file) that needs to be undone later (e.g. free the memory or close
-the file), it can make a cleanup. The cleanup will be done at some
-future point: when the command is finished, when an error occurs, or
-when your code decides it's time to do cleanups.
+@item SEEK_CUR
+@item SEEK_SET
+Define these to appropriate value for the system lseek(), if not already
+defined.
-You can also discard cleanups, that is, throw them away without doing
-what they say. This is only done if you ask that it be done.
+@item STOP_SIGNAL
+This is the signal for stopping @value{GDBN}. Defaults to SIGTSTP. (Only
+redefined for the Convex.)
-Syntax:
+@item USE_O_NOCTTY
+Define this if the interior's tty should be opened with the O_NOCTTY
+flag. (FIXME: This should be a native-only flag, but @file{inflow.c} is
+always linked in.)
-@table @code
-@item struct cleanup *@var{old_chain};
-Declare a variable which will hold a cleanup chain handle.
+@item USG
+Means that System V (prior to SVR4) include files are in use. (FIXME:
+This symbol is abused in @file{infrun.c}, @file{regex.c},
+@file{remote-nindy.c}, and @file{utils.c} for other things, at the
+moment.)
-@item @var{old_chain} = make_cleanup (@var{function}, @var{arg});
-Make a cleanup which will cause @var{function} to be called with @var{arg}
-(a @code{char *}) later. The result, @var{old_chain}, is a handle that can be
-passed to @code{do_cleanups} or @code{discard_cleanups} later. Unless you are
-going to call @code{do_cleanups} or @code{discard_cleanups} yourself,
-you can ignore the result from @code{make_cleanup}.
+@item lint
+Define this to help placate lint in some situations.
+@item volatile
+Define this to override the defaults of @code{__volatile__} or
+@code{/**/}.
-@item do_cleanups (@var{old_chain});
-Perform all cleanups done since @code{make_cleanup} returned @var{old_chain}.
-E.g.:
-@example
-make_cleanup (a, 0);
-old = make_cleanup (b, 0);
-do_cleanups (old);
-@end example
-@noindent
-will call @code{b()} but will not call @code{a()}. The cleanup that calls @code{a()} will remain
-in the cleanup chain, and will be done later unless otherwise discarded.@refill
+@end table
-@item discard_cleanups (@var{old_chain});
-Same as @code{do_cleanups} except that it just removes the cleanups from the
-chain and does not call the specified functions.
-@end table
+@node Target Architecture Definition
+
+@chapter Target Architecture Definition
+
+@value{GDBN}'s target architecture defines what sort of machine-language programs
+@value{GDBN} can work with, and how it works with them.
+
+At present, the target architecture definition consists of a number of C
+macros.
+
+@section Registers and Memory
+
+@value{GDBN}'s model of the target machine is rather simple. @value{GDBN} assumes the
+machine includes a bank of registers and a block of memory. Each
+register may have a different size.
+
+@value{GDBN} does not have a magical way to match up with the compiler's idea of
+which registers are which; however, it is critical that they do match up
+accurately. The only way to make this work is to get accurate
+information about the order that the compiler uses, and to reflect that
+in the @code{REGISTER_NAME} and related macros.
+
+@value{GDBN} can handle big-endian, little-endian, and bi-endian architectures.
+
+@section Pointers Are Not Always Addresses
+@cindex pointer representation
+@cindex address representation
+@cindex word-addressed machines
+@cindex separate data and code address spaces
+@cindex spaces, separate data and code address
+@cindex address spaces, separate data and code
+@cindex code pointers, word-addressed
+@cindex converting between pointers and addresses
+@cindex D10V addresses
+
+On almost all 32-bit architectures, the representation of a pointer is
+indistinguishable from the representation of some fixed-length number
+whose value is the byte address of the object pointed to. On such
+machines, the words `pointer' and `address' can be used interchangeably.
+However, architectures with smaller word sizes are often cramped for
+address space, so they may choose a pointer representation that breaks this
+identity, and allows a larger code address space.
+
+For example, the Mitsubishi D10V is a 16-bit VLIW processor whose
+instructions are 32 bits long@footnote{Some D10V instructions are
+actually pairs of 16-bit sub-instructions. However, since you can't
+jump into the middle of such a pair, code addresses can only refer to
+full 32 bit instructions, which is what matters in this explanation.}.
+If the D10V used ordinary byte addresses to refer to code locations,
+then the processor would only be able to address 64kb of instructions.
+However, since instructions must be aligned on four-byte boundaries, the
+low two bits of any valid instruction's byte address are always zero ---
+byte addresses waste two bits. So instead of byte addresses, the D10V
+uses word addresses --- byte addresses shifted right two bits --- to
+refer to code. Thus, the D10V can use 16-bit words to address 256kb of
+code space.
+
+However, this means that code pointers and data pointers have different
+forms on the D10V. The 16-bit word @code{0xC020} refers to byte address
+@code{0xC020} when used as a data address, but refers to byte address
+@code{0x30080} when used as a code address.
+
+(The D10V also uses separate code and data address spaces, which also
+affects the correspondence between pointers and addresses, but we're
+going to ignore that here; this example is already too long.)
+
+To cope with architectures like this --- the D10V is not the only one!
+--- @value{GDBN} tries to distinguish between @dfn{addresses}, which are
+byte numbers, and @dfn{pointers}, which are the target's representation
+of an address of a particular type of data. In the example above,
+@code{0xC020} is the pointer, which refers to one of the addresses
+@code{0xC020} or @code{0x30080}, depending on the type imposed upon it.
+@value{GDBN} provides functions for turning a pointer into an address
+and vice versa, in the appropriate way for the current architecture.
+
+Unfortunately, since addresses and pointers are identical on almost all
+processors, this distinction tends to bit-rot pretty quickly. Thus,
+each time you port @value{GDBN} to an architecture which does
+distinguish between pointers and addresses, you'll probably need to
+clean up some architecture-independent code.
+
+Here are functions which convert between pointers and addresses:
+
+@deftypefun CORE_ADDR extract_typed_address (void *@var{buf}, struct type *@var{type})
+Treat the bytes at @var{buf} as a pointer or reference of type
+@var{type}, and return the address it represents, in a manner
+appropriate for the current architecture. This yields an address
+@value{GDBN} can use to read target memory, disassemble, etc. Note that
+@var{buf} refers to a buffer in @value{GDBN}'s memory, not the
+inferior's.
+
+For example, if the current architecture is the Intel x86, this function
+extracts a little-endian integer of the appropriate length from
+@var{buf} and returns it. However, if the current architecture is the
+D10V, this function will return a 16-bit integer extracted from
+@var{buf}, multiplied by four if @var{type} is a pointer to a function.
+
+If @var{type} is not a pointer or reference type, then this function
+will signal an internal error.
+@end deftypefun
+
+@deftypefun CORE_ADDR store_typed_address (void *@var{buf}, struct type *@var{type}, CORE_ADDR @var{addr})
+Store the address @var{addr} in @var{buf}, in the proper format for a
+pointer of type @var{type} in the current architecture. Note that
+@var{buf} refers to a buffer in @value{GDBN}'s memory, not the
+inferior's.
+
+For example, if the current architecture is the Intel x86, this function
+stores @var{addr} unmodified as a little-endian integer of the
+appropriate length in @var{buf}. However, if the current architecture
+is the D10V, this function divides @var{addr} by four if @var{type} is
+a pointer to a function, and then stores it in @var{buf}.
+
+If @var{type} is not a pointer or reference type, then this function
+will signal an internal error.
+@end deftypefun
+
+@deftypefun CORE_ADDR value_as_pointer (value_ptr @var{val})
+Assuming that @var{val} is a pointer, return the address it represents,
+as appropriate for the current architecture.
+
+This function actually works on integral values, as well as pointers.
+For pointers, it performs architecture-specific conversions as
+described above for @code{extract_typed_address}.
+@end deftypefun
+
+@deftypefun CORE_ADDR value_from_pointer (struct type *@var{type}, CORE_ADDR @var{addr})
+Create and return a value representing a pointer of type @var{type} to
+the address @var{addr}, as appropriate for the current architecture.
+This function performs architecture-specific conversions as described
+above for @code{store_typed_address}.
+@end deftypefun
+
+
+@value{GDBN} also provides functions that do the same tasks, but assume
+that pointers are simply byte addresses; they aren't sensitive to the
+current architecture, beyond knowing the appropriate endianness.
+
+@deftypefun CORE_ADDR extract_address (void *@var{addr}, int len)
+Extract a @var{len}-byte number from @var{addr} in the appropriate
+endianness for the current architecture, and return it. Note that
+@var{addr} refers to @value{GDBN}'s memory, not the inferior's.
+
+This function should only be used in architecture-specific code; it
+doesn't have enough information to turn bits into a true address in the
+appropriate way for the current architecture. If you can, use
+@code{extract_typed_address} instead.
+@end deftypefun
+
+@deftypefun void store_address (void *@var{addr}, int @var{len}, LONGEST @var{val})
+Store @var{val} at @var{addr} as a @var{len}-byte integer, in the
+appropriate endianness for the current architecture. Note that
+@var{addr} refers to a buffer in @value{GDBN}'s memory, not the
+inferior's.
+
+This function should only be used in architecture-specific code; it
+doesn't have enough information to turn a true address into bits in the
+appropriate way for the current architecture. If you can, use
+@code{store_typed_address} instead.
+@end deftypefun
+
+
+Here are some macros which architectures can define to indicate the
+relationship between pointers and addresses. These have default
+definitions, appropriate for architectures on which all pointers are
+simple byte addresses.
+
+@deftypefn {Target Macro} CORE_ADDR POINTER_TO_ADDRESS (struct type *@var{type}, char *@var{buf})
+Assume that @var{buf} holds a pointer of type @var{type}, in the
+appropriate format for the current architecture. Return the byte
+address the pointer refers to.
+
+This function may safely assume that @var{type} is either a pointer or a
+C++ reference type.
+@end deftypefn
+
+@deftypefn {Target Macro} void ADDRESS_TO_POINTER (struct type *@var{type}, char *@var{buf}, CORE_ADDR @var{addr})
+Store in @var{buf} a pointer of type @var{type} representing the address
+@var{addr}, in the appropriate format for the current architecture.
+
+This function may safely assume that @var{type} is either a pointer or a
+C++ reference type.
+@end deftypefn
+
+
+@section Using Different Register and Memory Data Representations
+@cindex raw representation
+@cindex virtual representation
+@cindex representations, raw and virtual
+@cindex register data formats, converting
+@cindex @code{struct value}, converting register contents to
+
+Some architectures use one representation for a value when it lives in a
+register, but use a different representation when it lives in memory.
+In @value{GDBN}'s terminology, the @dfn{raw} representation is the one used in
+the target registers, and the @dfn{virtual} representation is the one
+used in memory, and within @value{GDBN} @code{struct value} objects.
+
+For almost all data types on almost all architectures, the virtual and
+raw representations are identical, and no special handling is needed.
+However, they do occasionally differ. For example:
-Some functions, e.g. @code{fputs_filtered()} or @code{error()}, specify that they
-``should not be called when cleanups are not in place''. This means
-that any actions you need to reverse in the case of an error or
-interruption must be on the cleanup chain before you call these functions,
-since they might never return to your code (they @samp{longjmp} instead).
+@itemize @bullet
+@item
+The x86 architecture supports an 80-bit long double type. However, when
+we store those values in memory, they occupy twelve bytes: the
+floating-point number occupies the first ten, and the final two bytes
+are unused. This keeps the values aligned on four-byte boundaries,
+allowing more efficient access. Thus, the x86 80-bit floating-point
+type is the raw representation, and the twelve-byte loosely-packed
+arrangement is the virtual representation.
-@node Wrapping
-@chapter Wrapping Output Lines
+@item
+Some 64-bit MIPS targets present 32-bit registers to @value{GDBN} as 64-bit
+registers, with garbage in their upper bits. @value{GDBN} ignores the top 32
+bits. Thus, the 64-bit form, with garbage in the upper 32 bits, is the
+raw representation, and the trimmed 32-bit representation is the
+virtual representation.
-Output that goes through @code{printf_filtered} or @code{fputs_filtered} or
-@code{fputs_demangled} needs only to have calls to @code{wrap_here} added
-in places that would be good breaking points. The utility routines
-will take care of actually wrapping if the line width is exceeded.
+@end itemize
-The argument to @code{wrap_here} is an indentation string which is printed
-@emph{only} if the line breaks there. This argument is saved away and used
-later. It must remain valid until the next call to @code{wrap_here} or
-until a newline has been printed through the @code{*_filtered} functions.
-Don't pass in a local variable and then return!
+In general, the raw representation is determined by the architecture, or
+@value{GDBN}'s interface to the architecture, while the virtual representation
+can be chosen for @value{GDBN}'s convenience. @value{GDBN}'s register file,
+@code{registers}, holds the register contents in raw format, and the @value{GDBN}
+remote protocol transmits register values in raw format.
-It is usually best to call @code{wrap_here()} after printing a comma or space.
-If you call it before printing a space, make sure that your indentation
-properly accounts for the leading space that will print if the line wraps
-there.
+Your architecture may define the following macros to request raw /
+virtual conversions:
-Any function or set of functions that produce filtered output must finish
-by printing a newline, to flush the wrap buffer, before switching to
-unfiltered (``@code{printf}'') output. Symbol reading routines that print
-warnings are a good example.
+@deftypefn {Target Macro} int REGISTER_CONVERTIBLE (int @var{reg})
+Return non-zero if register number @var{reg}'s value needs different raw
+and virtual formats.
+You should not use @code{REGISTER_CONVERT_TO_VIRTUAL} for a register
+unless this macro returns a non-zero value for that register.
+@end deftypefn
-@node Frames
-@chapter Frames
+@deftypefn {Target Macro} int REGISTER_RAW_SIZE (int @var{reg})
+The size of register number @var{reg}'s raw value. This is the number
+of bytes the register will occupy in @code{registers}, or in a @value{GDBN}
+remote protocol packet.
+@end deftypefn
-A frame is a construct that GDB uses to keep track of calling and called
-functions.
+@deftypefn {Target Macro} int REGISTER_VIRTUAL_SIZE (int @var{reg})
+The size of register number @var{reg}'s value, in its virtual format.
+This is the size a @code{struct value}'s buffer will have, holding that
+register's value.
+@end deftypefn
-@table @code
-@item FRAME_FP
-in the machine description has no meaning to the machine-independent
-part of GDB, except that it is used when setting up a new frame from
-scratch, as follows:
+@deftypefn {Target Macro} struct type *REGISTER_VIRTUAL_TYPE (int @var{reg})
+This is the type of the virtual representation of register number
+@var{reg}. Note that there is no need for a macro giving a type for the
+register's raw form; once the register's value has been obtained, @value{GDBN}
+always uses the virtual form.
+@end deftypefn
-@example
- create_new_frame (read_register (FP_REGNUM), read_pc ()));
-@end example
+@deftypefn {Target Macro} void REGISTER_CONVERT_TO_VIRTUAL (int @var{reg}, struct type *@var{type}, char *@var{from}, char *@var{to})
+Convert the value of register number @var{reg} to @var{type}, which
+should always be @code{REGISTER_VIRTUAL_TYPE (@var{reg})}. The buffer
+at @var{from} holds the register's value in raw format; the macro should
+convert the value to virtual format, and place it at @var{to}.
-Other than that, all the meaning imparted to @code{FP_REGNUM} is imparted by
-the machine-dependent code. So, @code{FP_REGNUM} can have any value that
-is convenient for the code that creates new frames. (@code{create_new_frame}
-calls @code{INIT_EXTRA_FRAME_INFO} if it is defined; that is where you should
-use the @code{FP_REGNUM} value, if your frames are nonstandard.)
-
-@item FRAME_CHAIN
-Given a GDB frame, determine the address of the calling function's
-frame. This will be used to create a new GDB frame struct, and then
-@code{INIT_EXTRA_FRAME_INFO} and @code{INIT_FRAME_PC} will be called for
-the new frame.
-@end table
+Note that @code{REGISTER_CONVERT_TO_VIRTUAL} and
+@code{REGISTER_CONVERT_TO_RAW} take their @var{reg} and @var{type}
+arguments in different orders.
-@node Remote Stubs
-@chapter Remote Stubs
+You should only use @code{REGISTER_CONVERT_TO_VIRTUAL} with registers
+for which the @code{REGISTER_CONVERTIBLE} macro returns a non-zero
+value.
+@end deftypefn
-GDB's file @file{remote.c} talks a serial protocol to code that runs
-in the target system. GDB provides several sample ``stubs'' that can
-be integrated into target programs or operating systems for this purpose;
-they are named @file{*-stub.c}.
+@deftypefn {Target Macro} void REGISTER_CONVERT_TO_RAW (struct type *@var{type}, int @var{reg}, char *@var{from}, char *@var{to})
+Convert the value of register number @var{reg} to @var{type}, which
+should always be @code{REGISTER_VIRTUAL_TYPE (@var{reg})}. The buffer
+at @var{from} holds the register's value in raw format; the macro should
+convert the value to virtual format, and place it at @var{to}.
-The GDB user's manual describes how to put such a stub into your target
-code. What follows is a discussion of integrating the SPARC stub
-into a complicated operating system (rather than a simple program),
-by Stu Grossman, the author of this stub.
+Note that REGISTER_CONVERT_TO_VIRTUAL and REGISTER_CONVERT_TO_RAW take
+their @var{reg} and @var{type} arguments in different orders.
+@end deftypefn
-The trap handling code in the stub assumes the following upon entry to
-trap_low:
-@enumerate
-@item %l1 and %l2 contain pc and npc respectively at the time of the trap
-@item traps are disabled
-@item you are in the correct trap window
-@end enumerate
+@section Frame Interpretation
-As long as your trap handler can guarantee those conditions, then there is no
-reason why you shouldn't be able to `share' traps with the stub. The stub has
-no requirement that it be jumped to directly from the hardware trap vector.
-That is why it calls @code{exceptionHandler()}, which is provided by the external
-environment. For instance, this could setup the hardware traps to actually
-execute code which calls the stub first, and then transfers to its own trap
-handler.
-
-For the most point, there probably won't be much of an issue with `sharing'
-traps, as the traps we use are usually not used by the kernel, and often
-indicate unrecoverable error conditions. Anyway, this is all controlled by a
-table, and is trivial to modify.
-The most important trap for us is for @code{ta 1}. Without that, we
-can't single step or do breakpoints. Everything else is unnecessary
-for the proper operation of the debugger/stub.
-
-From reading the stub, it's probably not obvious how breakpoints work. They
-are simply done by deposit/examine operations from GDB.
-
-@node Longjmp Support
-@chapter Longjmp Support
-
-GDB has support for figuring out that the target is doing a
-@code{longjmp} and for stopping at the target of the jump, if we are
-stepping. This is done with a few specialized internal breakpoints,
-which are visible in the @code{maint info breakpoint} command.
+@section Inferior Call Setup
-To make this work, you need to define a macro called
-@code{GET_LONGJMP_TARGET}, which will examine the @code{jmp_buf}
-structure and extract the longjmp target address. Since @code{jmp_buf}
-is target specific, you will need to define it in the appropriate
-@file{tm-xxx.h} file. Look in @file{tm-sun4os4.h} and
-@file{sparc-tdep.c} for examples of how to do this.
+@section Compiler Characteristics
-@node Coding Style
-@chapter Coding Style
+@section Target Conditionals
-GDB is generally written using the GNU coding standards, as described in
-@file{standards.texi}, which is available for anonymous FTP from GNU
-archive sites. There are some additional considerations for GDB
-maintainers that reflect the unique environment and style of GDB
-maintenance. If you follow these guidelines, GDB will be more
-consistent and easier to maintain.
+This section describes the macros that you can use to define the target
+machine.
-GDB's policy on the use of prototypes is that prototypes are used
-to @emph{declare} functions but never to @emph{define} them. Simple
-macros are used in the declarations, so that a non-ANSI compiler can
-compile GDB without trouble. The simple macro calls are used like
-this:
+@table @code
-@example @code
-extern int
-memory_remove_breakpoint PARAMS ((CORE_ADDR, char *));
-@end example
+@item ADDITIONAL_OPTIONS
+@item ADDITIONAL_OPTION_CASES
+@item ADDITIONAL_OPTION_HANDLER
+@item ADDITIONAL_OPTION_HELP
+These are a set of macros that allow the addition of additional command
+line options to @value{GDBN}. They are currently used only for the unsupported
+i960 Nindy target, and should not be used in any other configuration.
+
+@item ADDR_BITS_REMOVE (addr)
+If a raw machine instruction address includes any bits that are not
+really part of the address, then define this macro to expand into an
+expression that zeros those bits in @var{addr}. This is only used for
+addresses of instructions, and even then not in all contexts.
+
+For example, the two low-order bits of the PC on the Hewlett-Packard PA
+2.0 architecture contain the privilege level of the corresponding
+instruction. Since instructions must always be aligned on four-byte
+boundaries, the processor masks out these bits to generate the actual
+address of the instruction. ADDR_BITS_REMOVE should filter out these
+bits with an expression such as @code{((addr) & ~3)}.
+
+@item ADDRESS_TO_POINTER (@var{type}, @var{buf}, @var{addr})
+Store in @var{buf} a pointer of type @var{type} representing the address
+@var{addr}, in the appropriate format for the current architecture.
+This macro may safely assume that @var{type} is either a pointer or a
+C++ reference type.
+@xref{Target Architecture Definition, , Pointers Are Not Always Addresses}.
-Note the double parentheses around the parameter types. This allows
-an arbitrary number of parameters to be described, without freaking
-out the C preprocessor. When the function has no parameters, it
-should be described like:
+@item BEFORE_MAIN_LOOP_HOOK
+Define this to expand into any code that you want to execute before the
+main loop starts. Although this is not, strictly speaking, a target
+conditional, that is how it is currently being used. Note that if a
+configuration were to define it one way for a host and a different way
+for the target, @value{GDBN} will probably not compile, let alone run correctly.
+This is currently used only for the unsupported i960 Nindy target, and
+should not be used in any other configuration.
-@example @code
-void
-noprocess PARAMS ((void));
-@end example
+@item BELIEVE_PCC_PROMOTION
+Define if the compiler promotes a short or char parameter to an int, but
+still reports the parameter as its original type, rather than the
+promoted type.
-The @code{PARAMS} macro expands to its argument in ANSI C, or to a simple
-@code{()} in traditional C.
+@item BELIEVE_PCC_PROMOTION_TYPE
+Define this if @value{GDBN} should believe the type of a short argument when
+compiled by pcc, but look within a full int space to get its value.
+Only defined for Sun-3 at present.
-All external functions should have a @code{PARAMS} declaration in a
-header file that callers include. All static functions should have such
-a declaration near the top of their source file.
+@item BITS_BIG_ENDIAN
+Define this if the numbering of bits in the targets does *not* match the
+endianness of the target byte order. A value of 1 means that the bits
+are numbered in a big-endian order, 0 means little-endian.
-We don't have a gcc option that will properly check that these rules
-have been followed, but it's GDB policy, and we periodically check it
-using the tools available (plus manual labor), and clean up any remnants.
+@item BREAKPOINT
+This is the character array initializer for the bit pattern to put into
+memory where a breakpoint is set. Although it's common to use a trap
+instruction for a breakpoint, it's not required; for instance, the bit
+pattern could be an invalid instruction. The breakpoint must be no
+longer than the shortest instruction of the architecture.
+
+@var{BREAKPOINT} has been deprecated in favour of
+@var{BREAKPOINT_FROM_PC}.
+
+@item BIG_BREAKPOINT
+@item LITTLE_BREAKPOINT
+Similar to BREAKPOINT, but used for bi-endian targets.
+
+@var{BIG_BREAKPOINT} and @var{LITTLE_BREAKPOINT} have been deprecated in
+favour of @var{BREAKPOINT_FROM_PC}.
+
+@item REMOTE_BREAKPOINT
+@item LITTLE_REMOTE_BREAKPOINT
+@item BIG_REMOTE_BREAKPOINT
+Similar to BREAKPOINT, but used for remote targets.
+
+@var{BIG_REMOTE_BREAKPOINT} and @var{LITTLE_REMOTE_BREAKPOINT} have been
+deprecated in favour of @var{BREAKPOINT_FROM_PC}.
+
+@item BREAKPOINT_FROM_PC (pcptr, lenptr)
+
+Use the program counter to determine the contents and size of a
+breakpoint instruction. It returns a pointer to a string of bytes that
+encode a breakpoint instruction, stores the length of the string to
+*lenptr, and adjusts pc (if necessary) to point to the actual memory
+location where the breakpoint should be inserted.
+
+Although it is common to use a trap instruction for a breakpoint, it's
+not required; for instance, the bit pattern could be an invalid
+instruction. The breakpoint must be no longer than the shortest
+instruction of the architecture.
+
+Replaces all the other @var{BREAKPOINT} macros.
+
+@item MEMORY_INSERT_BREAKPOINT (addr, contents_cache)
+@item MEMORY_REMOVE_BREAKPOINT (addr, contents_cache)
+
+Insert or remove memory based breakpoints. Reasonable defaults
+(@code{default_memory_insert_breakpoint} and
+@code{default_memory_remove_breakpoint} respectively) have been
+provided so that it is not necessary to define these for most
+architectures. Architectures which may want to define
+@var{MEMORY_INSERT_BREAKPOINT} and @var{MEMORY_REMOVE_BREAKPOINT} will
+likely have instructions that are oddly sized or are not stored in a
+conventional manner.
+
+It may also be desirable (from an efficiency standpoint) to define
+custom breakpoint insertion and removal routines if
+@var{BREAKPOINT_FROM_PC} needs to read the target's memory for some
+reason.
+
+@item CALL_DUMMY_P
+A C expresson that is non-zero when the target suports inferior function
+calls.
+
+@item CALL_DUMMY_WORDS
+Pointer to an array of @var{LONGEST} words of data containing
+host-byte-ordered @var{REGISTER_BYTES} sized values that partially
+specify the sequence of instructions needed for an inferior function
+call.
+
+Should be deprecated in favour of a macro that uses target-byte-ordered
+data.
+
+@item SIZEOF_CALL_DUMMY_WORDS
+The size of @var{CALL_DUMMY_WORDS}. When @var{CALL_DUMMY_P} this must
+return a positive value. See also @var{CALL_DUMMY_LENGTH}.
-@node Clean Design
-@chapter Clean Design
+@item CALL_DUMMY
+A static initializer for @var{CALL_DUMMY_WORDS}. Deprecated.
-In addition to getting the syntax right, there's the little question of
-semantics. Some things are done in certain ways in GDB because long
-experience has shown that the more obvious ways caused various kinds of
-trouble. In particular:
+@item CALL_DUMMY_LOCATION
+inferior.h
-@table @bullet
-@item
-You can't assume the byte order of anything that comes from a
-target (including @var{value}s, object files, and instructions). Such
-things must be byte-swapped using @code{SWAP_TARGET_AND_HOST} in GDB,
-or one of the swap routines defined in @file{bfd.h}, such as @code{bfd_get_32}.
+@item CALL_DUMMY_STACK_ADJUST
+Stack adjustment needed when performing an inferior function call.
-@item
-You can't assume that you know what interface is being used to talk to
-the target system. All references to the target must go through the
-current @code{target_ops} vector.
+Should be deprecated in favor of something like @var{STACK_ALIGN}.
-@item
-You can't assume that the host and target machines are the same machine
-(except in the ``native'' support modules).
-In particular, you can't assume that the target machine's header files
-will be available on the host machine. Target code must bring along its
-own header files -- written from scratch or explicitly donated by their
-owner, to avoid copyright problems.
+@item CALL_DUMMY_STACK_ADJUST_P
+Predicate for use of @var{CALL_DUMMY_STACK_ADJUST}.
-@item
-Insertion of new @code{#ifdef}'s will be frowned upon. It's much better
-to write the code portably than to conditionalize it for various systems.
+Should be deprecated in favor of something like @var{STACK_ALIGN}.
-@item
-New @code{#ifdef}'s which test for specific compilers or manufacturers
-or operating systems are unacceptable. All @code{#ifdef}'s should test
-for features. The information about which configurations contain which
-features should be segregated into the configuration files. Experience
-has proven far too often that a feature unique to one particular system
-often creeps into other systems; and that a conditional based on
-some predefined macro for your current system will become worthless
-over time, as new versions of your system come out that behave differently
-with regard to this feature.
+@item CANNOT_FETCH_REGISTER (regno)
+A C expression that should be nonzero if @var{regno} cannot be fetched
+from an inferior process. This is only relevant if
+@code{FETCH_INFERIOR_REGISTERS} is not defined.
-@item
-Adding code that handles specific architectures, operating systems, target
-interfaces, or hosts, is not acceptable in generic code. If a hook
-is needed at that point, invent a generic hook and define it for your
-configuration, with something like:
+@item CANNOT_STORE_REGISTER (regno)
+A C expression that should be nonzero if @var{regno} should not be
+written to the target. This is often the case for program counters,
+status words, and other special registers. If this is not defined, @value{GDBN}
+will assume that all registers may be written.
-@example
-#ifdef WRANGLE_SIGNALS
- WRANGLE_SIGNALS (signo);
-#endif
-@end example
+@item DO_DEFERRED_STORES
+@item CLEAR_DEFERRED_STORES
+Define this to execute any deferred stores of registers into the inferior,
+and to cancel any deferred stores.
+
+Currently only implemented correctly for native Sparc configurations?
+
+@item COERCE_FLOAT_TO_DOUBLE (@var{formal}, @var{actual})
+If we are calling a function by hand, and the function was declared
+(according to the debug info) without a prototype, should we
+automatically promote floats to doubles? This macro must evaluate to
+non-zero if we should, or zero if we should leave the value alone.
+
+The argument @var{actual} is the type of the value we want to pass to
+the function. The argument @var{formal} is the type of this argument,
+as it appears in the function's definition. Note that @var{formal} may
+be zero if we have no debugging information for the function, or if
+we're passing more arguments than are officially declared (for example,
+varargs). This macro is never invoked if the function definitely has a
+prototype.
+
+The default behavior is to promote only when we have no type information
+for the formal parameter. This is different from the obvious behavior,
+which would be to promote whenever we have no prototype, just as the
+compiler does. It's annoying, but some older targets rely on this. If
+you want @value{GDBN} to follow the typical compiler behavior --- to always
+promote when there is no prototype in scope --- your gdbarch init
+function can call @code{set_gdbarch_coerce_float_to_double} and select
+the @code{standard_coerce_float_to_double} function.
-In your host, target, or native configuration file, as appropriate,
-define @code{WRANGLE_SIGNALS} to do the machine-dependent thing. Take
-a bit of care in defining the hook, so that it can be used by other
-ports in the future, if they need a hook in the same place.
+@item CPLUS_MARKER
+Define this to expand into the character that G++ uses to distinguish
+compiler-generated identifiers from programmer-specified identifiers.
+By default, this expands into @code{'$'}. Most System V targets should
+define this to @code{'.'}.
-If the hook is not defined, the code should do whatever "most" machines
-want. Using @code{#ifdef}, as above, is the preferred way to do this,
-but sometimes that gets convoluted, in which case use
+@item DBX_PARM_SYMBOL_CLASS
+Hook for the @code{SYMBOL_CLASS} of a parameter when decoding DBX symbol
+information. In the i960, parameters can be stored as locals or as
+args, depending on the type of the debug record.
-@example
-#ifndef SPECIAL_FOO_HANDLING
-#define SPECIAL_FOO_HANDLING(pc, sp) (0)
-#endif
-@end example
+@item DECR_PC_AFTER_BREAK
+Define this to be the amount by which to decrement the PC after the
+program encounters a breakpoint. This is often the number of bytes in
+BREAKPOINT, though not always. For most targets this value will be 0.
-where the macro is used or in an appropriate header file.
+@item DECR_PC_AFTER_HW_BREAK
+Similarly, for hardware breakpoints.
-Whether to include a @dfn{small} hook, a hook around the exact pieces of
-code which are system-dependent, or whether to replace a whole function
-with a hook depends on the case. A good example of this dilemma can be
-found in @code{get_saved_register}. All machines that GDB 2.8 ran on
-just needed the @code{FRAME_FIND_SAVED_REGS} hook to find the saved
-registers. Then the SPARC and Pyramid came along, and
-@code{HAVE_REGISTER_WINDOWS} and @code{REGISTER_IN_WINDOW_P} were
-introduced. Then the 29k and 88k required the @code{GET_SAVED_REGISTER}
-hook. The first three are examples of small hooks; the latter replaces
-a whole function. In this specific case, it is useful to have both
-kinds; it would be a bad idea to replace all the uses of the small hooks
-with @code{GET_SAVED_REGISTER}, since that would result in much
-duplicated code. Other times, duplicating a few lines of code here or
-there is much cleaner than introducing a large number of small hooks.
+@item DISABLE_UNSETTABLE_BREAK addr
+If defined, this should evaluate to 1 if @var{addr} is in a shared
+library in which breakpoints cannot be set and so should be disabled.
-Another way to generalize GDB along a particular interface is with an
-attribute struct. For example, GDB has been generalized to handle
-multiple kinds of remote interfaces -- not by #ifdef's everywhere, but
-by defining the "target_ops" structure and having a current target (as
-well as a stack of targets below it, for memory references). Whenever
-something needs to be done that depends on which remote interface we are
-using, a flag in the current target_ops structure is tested (e.g.
-`target_has_stack'), or a function is called through a pointer in the
-current target_ops structure. In this way, when a new remote interface
-is added, only one module needs to be touched -- the one that actually
-implements the new remote interface. Other examples of
-attribute-structs are BFD access to multiple kinds of object file
-formats, or GDB's access to multiple source languages.
+@item DO_REGISTERS_INFO
+If defined, use this to print the value of a register or all registers.
-Please avoid duplicating code. For example, in GDB 3.x all the code
-interfacing between @code{ptrace} and the rest of GDB was duplicated in
-@file{*-dep.c}, and so changing something was very painful. In GDB 4.x,
-these have all been consolidated into @file{infptrace.c}.
-@file{infptrace.c} can deal with variations between systems the same way
-any system-independent file would (hooks, #if defined, etc.), and
-machines which are radically different don't need to use infptrace.c at
-all.
+@item DWARF_REG_TO_REGNUM
+Convert DWARF register number into @value{GDBN} regnum. If not defined,
+no conversion will be performed.
-@item
-@emph{Do} write code that doesn't depend on the sizes of C data types,
-the format of the host's floating point numbers, the alignment of anything,
-or the order of evaluation of expressions. In short, follow good
-programming practices for writing portable C code.
+@item DWARF2_REG_TO_REGNUM
+Convert DWARF2 register number into @value{GDBN} regnum. If not
+defined, no conversion will be performed.
-@end table
+@item ECOFF_REG_TO_REGNUM
+Convert ECOFF register number into @value{GDBN} regnum. If not defined,
+no conversion will be performed.
-@node Submitting Patches
-@chapter Submitting Patches
+@item END_OF_TEXT_DEFAULT
+This is an expression that should designate the end of the text section
+(? FIXME ?)
-Thanks for thinking of offering your changes back to the community of
-GDB users. In general we like to get well designed enhancements.
-Thanks also for checking in advance about the best way to transfer the
-changes.
+@item EXTRACT_RETURN_VALUE(type,regbuf,valbuf)
+Define this to extract a function's return value of type @var{type} from
+the raw register state @var{regbuf} and copy that, in virtual format,
+into @var{valbuf}.
+
+@item EXTRACT_STRUCT_VALUE_ADDRESS(regbuf)
+When @var{EXTRACT_STRUCT_VALUE_ADDRESS_P} this is used to to extract
+from an array @var{regbuf} (containing the raw register state) the
+address in which a function should return its structure value, as a
+CORE_ADDR (or an expression that can be used as one).
-The two main problems with getting your patches in are,
+@item EXTRACT_STRUCT_VALUE_ADDRESS_P
+Predicate for @var{EXTRACT_STRUCT_VALUE_ADDRESS}.
-@table @bullet
-@item
-The GDB maintainers will only install ``cleanly designed'' patches.
-You may not always agree on what is clean design.
-@pxref{Coding Style}, @pxref{Clean Design}.
+@item FLOAT_INFO
+If defined, then the `info float' command will print information about
+the processor's floating point unit.
-@item
-If the maintainers don't have time to put the patch in when it
-arrives, or if there is any question about a patch, it
-goes into a large queue with everyone else's patches and
-bug reports.
-@end table
+@item FP_REGNUM
+If the virtual frame pointer is kept in a register, then define this
+macro to be the number (greater than or equal to zero) of that register.
-I don't know how to get past these problems except by continuing to try.
+This should only need to be defined if @code{TARGET_READ_FP} and
+@code{TARGET_WRITE_FP} are not defined.
-There are two issues here -- technical and legal.
+@item FRAMELESS_FUNCTION_INVOCATION(fi)
+Define this to an expression that returns 1 if the function invocation
+represented by @var{fi} does not have a stack frame associated with it.
+Otherwise return 0.
-The legal issue is that to incorporate substantial changes requires a
-copyright assignment from you and/or your employer, granting ownership
-of the changes to the Free Software Foundation. You can get the
-standard document for doing this by sending mail to
-@code{gnu@@prep.ai.mit.edu} and asking for it. I recommend that people
-write in "All programs owned by the Free Software Foundation" as "NAME
-OF PROGRAM", so that changes in many programs (not just GDB, but GAS,
-Emacs, GCC, etc) can be contributed with only one piece of legalese
-pushed through the bureacracy and filed with the FSF. I can't start
-merging changes until this paperwork is received by the FSF (their
-rules, which I follow since I maintain it for them).
+@item FRAME_ARGS_ADDRESS_CORRECT
+stack.c
-Technically, the easiest way to receive changes is to receive each
-feature as a small context diff or unidiff, suitable for "patch".
-Each message sent to me should include the changes to C code and
-header files for a single feature, plus ChangeLog entries for each
-directory where files were modified, and diffs for any changes needed
-to the manuals (gdb/doc/gdb.texi or gdb/doc/gdbint.texi). If there
-are a lot of changes for a single feature, they can be split down
-into multiple messages.
-
-In this way, if I read and like the feature, I can add it to the
-sources with a single patch command, do some testing, and check it in.
-If you leave out the ChangeLog, I have to write one. If you leave
-out the doc, I have to puzzle out what needs documenting. Etc.
+@item FRAME_CHAIN(frame)
+Given @var{frame}, return a pointer to the calling frame.
-The reason to send each change in a separate message is that I will
-not install some of the changes. They'll be returned to you with
-questions or comments. If I'm doing my job, my message back to you
-will say what you have to fix in order to make the change acceptable.
-The reason to have separate messages for separate features is so
-that other changes (which I @emph{am} willing to accept) can be installed
-while one or more changes are being reworked. If multiple features
-are sent in a single message, I tend to not put in the effort to sort
-out the acceptable changes from the unacceptable, so none of the
-features get installed until all are acceptable.
-
-If this sounds painful or authoritarian, well, it is. But I get a lot
-of bug reports and a lot of patches, and most of them don't get
-installed because I don't have the time to finish the job that the bug
-reporter or the contributor could have done. Patches that arrive
-complete, working, and well designed, tend to get installed on the day
-they arrive. The others go into a queue and get installed if and when
-I scan back over the queue -- which can literally take months
-sometimes. It's in both our interests to make patch installation easy
--- you get your changes installed, and I make some forward progress on
-GDB in a normal 12-hour day (instead of them having to wait until I
-have a 14-hour or 16-hour day to spend cleaning up patches before I
-can install them).
-
-Please send patches to @code{bug-gdb@@prep.ai.mit.edu}, if they are less
-than about 25,000 characters. If longer than that, either make them
-available somehow (e.g. anonymous FTP), and announce it on
-@code{bug-gdb}, or send them directly to the GDB maintainers at
-@code{gdb-patches@@cygnus.com}.
-
-@node Host Conditionals
-@chapter Host Conditionals
-
-When GDB is configured and compiled, various macros are defined or left
-undefined, to control compilation based on the attributes of the host
-system. These macros and their meanings (or if the meaning is not
-documented here, then one of the source files where they are used is
-indicated) are:
+@item FRAME_CHAIN_COMBINE(chain,frame)
+Define this to take the frame chain pointer and the frame's nominal
+address and produce the nominal address of the caller's frame.
+Presently only defined for HP PA.
-@emph{NOTE: For now, both host and target conditionals are here.
-Eliminate target conditionals from this list as they are identified.}
+@item FRAME_CHAIN_VALID(chain,thisframe)
-@table @code
+Define this to be an expression that returns zero if the given frame is
+an outermost frame, with no caller, and nonzero otherwise. Several
+common definitions are available.
-@item BLOCK_ADDRESS_FUNCTION_RELATIVE
-dbxread.c
+@code{file_frame_chain_valid} is nonzero if the chain pointer is nonzero
+and given frame's PC is not inside the startup file (such as
+@file{crt0.o}). @code{func_frame_chain_valid} is nonzero if the chain
+pointer is nonzero and the given frame's PC is not in @code{main()} or a
+known entry point function (such as @code{_start()}).
+@code{generic_file_frame_chain_valid} and
+@code{generic_func_frame_chain_valid} are equivalent implementations for
+targets using generic dummy frames.
-@item GDBINIT_FILENAME
-The default name of GDB's initialization file (normally @file{.gdbinit}).
+@item FRAME_INIT_SAVED_REGS(frame)
+See @file{frame.h}. Determines the address of all registers in the
+current stack frame storing each in @code{frame->saved_regs}. Space for
+@code{frame->saved_regs} shall be allocated by
+@code{FRAME_INIT_SAVED_REGS} using either
+@code{frame_saved_regs_zalloc} or @code{frame_obstack_alloc}.
-@item KERNELDEBUG
-tm-hppa.h
+@var{FRAME_FIND_SAVED_REGS} and @var{EXTRA_FRAME_INFO} are deprecated.
-@item MEM_FNS_DECLARED
-Your host config file defines this if it includes
-declarations of @code{memcpy} and @code{memset}. Define this
-to avoid conflicts between the native include
-files and the declarations in @file{defs.h}.
+@item FRAME_NUM_ARGS (fi)
+For the frame described by @var{fi} return the number of arguments that
+are being passed. If the number of arguments is not known, return
+@code{-1}.
-@item NO_SYS_FILE
-dbxread.c
-@item PYRAMID_CONTROL_FRAME_DEBUGGING
-pyr-xdep.c
-@item SIGWINCH_HANDLER_BODY
-utils.c
-@item ADDITIONAL_OPTIONS
-main.c
-@item ADDITIONAL_OPTION_CASES
-main.c
-@item ADDITIONAL_OPTION_HANDLER
-main.c
-@item ADDITIONAL_OPTION_HELP
-main.c
-@item ADDR_BITS_REMOVE
-defs.h
-@item AIX_BUGGY_PTRACE_CONTINUE
-infptrace.c
-@item ALIGN_STACK_ON_STARTUP
-main.c
-@item ALTOS
-altos-xdep.c
-@item ALTOS_AS
-xm-altos.h
-@item ASCII_COFF
-remote-adapt.c
-@item BCS
-tm-delta88.h
-@item BEFORE_MAIN_LOOP_HOOK
-main.c
-@item BELIEVE_PCC_PROMOTION
-coffread.c
-@item BELIEVE_PCC_PROMOTION_TYPE
-stabsread.c
-@item BITS_BIG_ENDIAN
-defs.h
-@item BKPT_AT_MAIN
-solib.c
-@item BLOCK_ADDRESS_ABSOLUTE
-dbxread.c
-@item BPT_VECTOR
-tm-m68k.h
+@item FRAME_SAVED_PC(frame)
+Given @var{frame}, return the pc saved there. That is, the return
+address.
-@item BROKEN_LARGE_ALLOCA
-Avoid large @code{alloca}'s. For example, on sun's, Large alloca's fail
-because the attempt to increase the stack limit in main() fails because
-shared libraries are allocated just below the initial stack limit. The
-SunOS kernel will not allow the stack to grow into the area occupied by
-the shared libraries.
+@item FUNCTION_EPILOGUE_SIZE
+For some COFF targets, the @code{x_sym.x_misc.x_fsize} field of the
+function end symbol is 0. For such targets, you must define
+@code{FUNCTION_EPILOGUE_SIZE} to expand into the standard size of a
+function's epilogue.
+
+@item FUNCTION_START_OFFSET
+An integer, giving the offset in bytes from a function's address (as
+used in the values of symbols, function pointers, etc.), and the
+function's first genuine instruction.
+
+This is zero on almost all machines: the function's address is usually
+the address of its first instruction. However, on the VAX, for example,
+each function starts with two bytes containing a bitmask indicating
+which registers to save upon entry to the function. The VAX @code{call}
+instructions check this value, and save the appropriate registers
+automatically. Thus, since the offset from the function's address to
+its first instruction is two bytes, @code{FUNCTION_START_OFFSET} would
+be 2 on the VAX.
-@item CALL_DUMMY
-valops.c
-@item CALL_DUMMY_LOCATION
-inferior.h
-@item CALL_DUMMY_STACK_ADJUST
-valops.c
-@item CANNOT_FETCH_REGISTER
-hppabsd-xdep.c
-@item CANNOT_STORE_REGISTER
-findvar.c
-@item CFRONT_PRODUCER
-dwarfread.c
-@item CHILD_PREPARE_TO_STORE
-inftarg.c
-@item CLEAR_DEFERRED_STORES
-inflow.c
-@item CLEAR_SOLIB
-objfiles.c
-@item COFF_ENCAPSULATE
-hppabsd-tdep.c
-@item COFF_FORMAT
-symm-tdep.c
-@item CORE_NEEDS_RELOCATION
-stack.c
-@item CPLUS_MARKER
-cplus-dem.c
-@item C_ALLOCA
-regex.c
-@item C_GLBLREG
-coffread.c
-@item DBXREAD_ONLY
-partial-stab.h
-@item DBX_PARM_SYMBOL_CLASS
-stabsread.c
-@item DEBUG
-remote-adapt.c
-@item DEBUG_INFO
-partial-stab.h
-@item DEBUG_PTRACE
-hppabsd-xdep.c
-@item DECR_PC_AFTER_BREAK
-breakpoint.c
+@item GCC_COMPILED_FLAG_SYMBOL
+@item GCC2_COMPILED_FLAG_SYMBOL
+If defined, these are the names of the symbols that @value{GDBN} will look for to
+detect that GCC compiled the file. The default symbols are
+@code{gcc_compiled.} and @code{gcc2_compiled.}, respectively. (Currently
+only defined for the Delta 68.)
+
+@item @value{GDBN}_MULTI_ARCH
+If defined and non-zero, enables suport for multiple architectures
+within @value{GDBN}.
+
+The support can be enabled at two levels. At level one, only
+definitions for previously undefined macros are provided; at level two,
+a multi-arch definition of all architecture dependant macros will be
+defined.
+
+@item @value{GDBN}_TARGET_IS_HPPA
+This determines whether horrible kludge code in dbxread.c and
+partial-stab.h is used to mangle multiple-symbol-table files from
+HPPA's. This should all be ripped out, and a scheme like elfread.c
+used.
-@item DEFAULT_PROMPT
-The default value of the prompt string (normally @code{"(gdb) "}).
+@item GET_LONGJMP_TARGET
+For most machines, this is a target-dependent parameter. On the
+DECstation and the Iris, this is a native-dependent parameter, since
+<setjmp.h> is needed to define it.
-@item DELTA88
-m88k-xdep.c
-@item DEV_TTY
-symmisc.c
-@item DGUX
-m88k-xdep.c
-@item DISABLE_UNSETTABLE_BREAK
-breakpoint.c
-@item DONT_USE_REMOTE
-remote.c
-@item DO_DEFERRED_STORES
-infrun.c
-@item DO_REGISTERS_INFO
-infcmd.c
-@item EXTRACT_RETURN_VALUE
-tm-m68k.h
-@item EXTRACT_STRUCT_VALUE_ADDRESS
-values.c
-@item EXTRA_FRAME_INFO
-frame.h
-@item EXTRA_SYMTAB_INFO
-symtab.h
-@item FILES_INFO_HOOK
-target.c
-@item FLOAT_INFO
-infcmd.c
-@item FOPEN_RB
-defs.h
-@item FUNCTION_EPILOGUE_SIZE
-coffread.c
-@item F_OK
-xm-ultra3.h
-@item GCC2_COMPILED_FLAG_SYMBOL
-dbxread.c
-@item GCC_COMPILED_FLAG_SYMBOL
-dbxread.c
-@item GCC_MANGLE_BUG
-symtab.c
-@item GCC_PRODUCER
-dwarfread.c
-@item GET_SAVED_REGISTER
-findvar.c
-@item GPLUS_PRODUCER
-dwarfread.c
-@item HANDLE_RBRAC
-partial-stab.h
+This macro determines the target PC address that longjmp() will jump to,
+assuming that we have just stopped at a longjmp breakpoint. It takes a
+CORE_ADDR * as argument, and stores the target PC value through this
+pointer. It examines the current state of the machine as needed.
-@item HAVE_MMAP
-In some cases, use the system call @code{mmap} for reading symbol
-tables. For some machines this allows for sharing and quick updates.
+@item GET_SAVED_REGISTER
+Define this if you need to supply your own definition for the function
+@code{get_saved_register}.
@item HAVE_REGISTER_WINDOWS
-findvar.c
-@item HAVE_SIGSETMASK
-main.c
-@item HAVE_TERMIO
-inflow.c
-@item HEADER_SEEK_FD
-arm-tdep.c
-@item HOSTING_ONLY
-xm-rtbsd.h
-@item HOST_BYTE_ORDER
-findvar.c
-@item HPUX_ASM
-xm-hp300hpux.h
-@item HPUX_VERSION_5
-hp300ux-xdep.c
-@item HP_OS_BUG
-infrun.c
-@item I80960
-remote-vx.c
-@item IEEE_FLOAT
-valprint.c
-@item IGNORE_SYMBOL
-dbxread.c
-@item INIT_EXTRA_FRAME_INFO
-blockframe.c
-@item INIT_EXTRA_SYMTAB_INFO
-symfile.c
-@item INIT_FRAME_PC
-blockframe.c
-@item INNER_THAN
-valops.c
-@item INT_MAX
-defs.h
-@item INT_MIN
-defs.h
-@item IN_GDB
-i960-pinsn.c
-@item IN_SIGTRAMP
-infrun.c
-@item IN_SOLIB_TRAMPOLINE
-infrun.c
-@item ISATTY
-main.c
-@item IS_TRAPPED_INTERNALVAR
-values.c
-@item KERNELDEBUG
-dbxread.c
-@item KERNEL_DEBUGGING
-tm-ultra3.h
+Define this if the target has register windows.
+@item REGISTER_IN_WINDOW_P (regnum)
+Define this to be an expression that is 1 if the given register is in
+the window.
-@item KERNEL_U_ADDR
-Define this to the address of the @code{u} structure (the ``user struct'',
-also known as the ``u-page'') in kernel virtual memory. GDB needs to know
-this so that it can subtract this address from absolute addresses in
-the upage, that are obtained via ptrace or from core files. On systems
-that don't need this value, set it to zero.
+@item IBM6000_TARGET
+Shows that we are configured for an IBM RS/6000 target. This
+conditional should be eliminated (FIXME) and replaced by
+feature-specific macros. It was introduced in haste and we are
+repenting at leisure.
-@item KERNEL_U_ADDR_BSD
-Define this to cause GDB to determine the address of @code{u} at runtime,
-by using Berkeley-style @code{nlist} on the kernel's image in the root
-directory.
+@item SYMBOLS_CAN_START_WITH_DOLLAR
+Some systems have routines whose names start with @samp{$}. Giving this
+macro a non-zero value tells @value{GDBN}'s expression parser to check for such
+routines when parsing tokens that begin with @samp{$}.
-@item KERNEL_U_ADDR_HPUX
-Define this to cause GDB to determine the address of @code{u} at runtime,
-by using HP-style @code{nlist} on the kernel's image in the root
-directory.
-
-@item LCC_PRODUCER
-dwarfread.c
-@item LOG_FILE
-remote-adapt.c
-@item LONGERNAMES
-cplus-dem.c
-@item LONGEST
-defs.h
-@item CC_HAS_LONG_LONG
-defs.h
-@item PRINTF_HAS_LONG_LONG
-defs.h
-@item LONG_MAX
-defs.h
-@item LSEEK_NOT_LINEAR
-source.c
-@item L_LNNO32
-coffread.c
+On HP-UX, certain system routines (millicode) have names beginning with
+@samp{$} or @samp{$$}. For example, @code{$$dyncall} is a millicode
+routine that handles inter-space procedure calls on PA-RISC.
-@item L_SET
-This macro is used as the argument to lseek (or, most commonly, bfd_seek).
-FIXME, should be replaced by SEEK_SET instead, which is the POSIX equivalent.
+@item IEEE_FLOAT
+Define this if the target system uses IEEE-format floating point numbers.
+
+@item INIT_EXTRA_FRAME_INFO (fromleaf, frame)
+If additional information about the frame is required this should be
+stored in @code{frame->extra_info}. Space for @code{frame->extra_info}
+is allocated using @code{frame_obstack_alloc}.
+
+@item INIT_FRAME_PC (fromleaf, prev)
+This is a C statement that sets the pc of the frame pointed to by
+@var{prev}. [By default...]
+
+@item INNER_THAN (lhs,rhs)
+Returns non-zero if stack address @var{lhs} is inner than (nearer to the
+stack top) stack address @var{rhs}. Define this as @code{lhs < rhs} if
+the target's stack grows downward in memory, or @code{lhs > rsh} if the
+stack grows upward.
+
+@item IN_SIGTRAMP (pc, name)
+Define this to return true if the given @var{pc} and/or @var{name}
+indicates that the current function is a sigtramp.
+
+@item SIGTRAMP_START (pc)
+@item SIGTRAMP_END (pc)
+Define these to be the start and end address of the sigtramp for the
+given @var{pc}. On machines where the address is just a compile time
+constant, the macro expansion will typically just ignore the supplied
+@var{pc}.
+
+@item IN_SOLIB_CALL_TRAMPOLINE pc name
+Define this to evaluate to nonzero if the program is stopped in the
+trampoline that connects to a shared library.
+
+@item IN_SOLIB_RETURN_TRAMPOLINE pc name
+Define this to evaluate to nonzero if the program is stopped in the
+trampoline that returns from a shared library.
+
+@item IN_SOLIB_DYNSYM_RESOLVE_CODE pc
+Define this to evaluate to nonzero if the program is stopped in the
+dynamic linker.
+
+@item SKIP_SOLIB_RESOLVER pc
+Define this to evaluate to the (nonzero) address at which execution
+should continue to get past the dynamic linker's symbol resolution
+function. A zero value indicates that it is not important or necessary
+to set a breakpoint to get through the dynamic linker and that single
+stepping will suffice.
+
+@item IS_TRAPPED_INTERNALVAR (name)
+This is an ugly hook to allow the specification of special actions that
+should occur as a side-effect of setting the value of a variable
+internal to @value{GDBN}. Currently only used by the h8500. Note that this
+could be either a host or target conditional.
-@item MACHKERNELDEBUG
-hppabsd-tdep.c
-@item MAINTENANCE
-dwarfread.c
+@item NEED_TEXT_START_END
+Define this if @value{GDBN} should determine the start and end addresses of the
+text section. (Seems dubious.)
-@item MAINTENANCE_CMDS
-If the value of this is 1, then a number of optional maintenance commands
-are compiled in.
+@item NO_HIF_SUPPORT
+(Specific to the a29k.)
+
+@item POINTER_TO_ADDRESS (@var{type}, @var{buf})
+Assume that @var{buf} holds a pointer of type @var{type}, in the
+appropriate format for the current architecture. Return the byte
+address the pointer refers to.
+@xref{Target Architecture Definition, , Pointers Are Not Always Addresses}.
+
+@item REGISTER_CONVERTIBLE (@var{reg})
+Return non-zero if @var{reg} uses different raw and virtual formats.
+@xref{Target Architecture Definition, , Using Different Register and Memory Data Representations}.
+
+@item REGISTER_RAW_SIZE (@var{reg})
+Return the raw size of @var{reg}.
+@xref{Target Architecture Definition, , Using Different Register and Memory Data Representations}.
+
+@item REGISTER_VIRTUAL_SIZE (@var{reg})
+Return the virtual size of @var{reg}.
+@xref{Target Architecture Definition, , Using Different Register and Memory Data Representations}.
+
+@item REGISTER_VIRTUAL_TYPE (@var{reg})
+Return the virtual type of @var{reg}.
+@xref{Target Architecture Definition, , Using Different Register and Memory Data Representations}.
+
+@item REGISTER_CONVERT_TO_VIRTUAL(@var{reg}, @var{type}, @var{from}, @var{to})
+Convert the value of register @var{reg} from its raw form to its virtual
+form.
+@xref{Target Architecture Definition, , Using Different Register and Memory Data Representations}.
+
+@item REGISTER_CONVERT_TO_RAW(@var{type}, @var{reg}, @var{from}, @var{to})
+Convert the value of register @var{reg} from its virtual form to its raw
+form.
+@xref{Target Architecture Definition, , Using Different Register and Memory Data Representations}.
+
+@item RETURN_VALUE_ON_STACK(@var{type})
+@findex RETURN_VALUE_ON_STACK
+@cindex returning structures by value
+@cindex structures, returning by value
+
+Return non-zero if values of type TYPE are returned on the stack, using
+the ``struct convention'' (i.e., the caller provides a pointer to a
+buffer in which the callee should store the return value). This
+controls how the @samp{finish} command finds a function's return value,
+and whether an inferior function call reserves space on the stack for
+the return value.
+
+The full logic @value{GDBN} uses here is kind of odd.
+@itemize @bullet
-@item MALLOC_INCOMPATIBLE
-Define this if the system's prototype for @code{malloc} differs from the
-@sc{ANSI} definition.
+@item
+If the type being returned by value is not a structure, union, or array,
+and @code{RETURN_VALUE_ON_STACK} returns zero, then @value{GDBN}
+concludes the value is not returned using the struct convention.
-@item MIPSEL
-mips-tdep.c
+@item
+Otherwise, @value{GDBN} calls @code{USE_STRUCT_CONVENTION} (see below).
+If that returns non-zero, @value{GDBN} assumes the struct convention is
+in use.
-@item MMAP_BASE_ADDRESS
-When using HAVE_MMAP, the first mapping should go at this address.
+@end itemize
-@item MMAP_INCREMENT
-when using HAVE_MMAP, this is the increment between mappings.
+In other words, to indicate that a given type is returned by value using
+the struct convention, that type must be either a struct, union, array,
+or something @code{RETURN_VALUE_ON_STACK} likes, @emph{and} something
+that @code{USE_STRUCT_CONVENTION} likes.
+
+Note that, in C and C++, arrays are never returned by value. In those
+languages, these predicates will always see a pointer type, never an
+array type. All the references above to arrays being returned by value
+apply only to other languages.
+
+@item SOFTWARE_SINGLE_STEP_P
+Define this as 1 if the target does not have a hardware single-step
+mechanism. The macro @code{SOFTWARE_SINGLE_STEP} must also be defined.
+
+@item SOFTWARE_SINGLE_STEP(signal,insert_breapoints_p)
+A function that inserts or removes (dependant on
+@var{insert_breapoints_p}) breakpoints at each possible destinations of
+the next instruction. See @code{sparc-tdep.c} and @code{rs6000-tdep.c}
+for examples.
+
+@item SOFUN_ADDRESS_MAYBE_MISSING
+
+Somebody clever observed that, the more actual addresses you have in the
+debug information, the more time the linker has to spend relocating
+them. So whenever there's some other way the debugger could find the
+address it needs, you should omit it from the debug info, to make
+linking faster.
+
+@code{SOFUN_ADDRESS_MAYBE_MISSING} indicates that a particular set of
+hacks of this sort are in use, affecting @code{N_SO} and @code{N_FUN}
+entries in stabs-format debugging information. @code{N_SO} stabs mark
+the beginning and ending addresses of compilation units in the text
+segment. @code{N_FUN} stabs mark the starts and ends of functions.
+
+@code{SOFUN_ADDRESS_MAYBE_MISSING} means two things:
+@itemize @bullet
-@item MONO
-ser-go32.c
-@item MOTOROLA
-xm-altos.h
-@item NBPG
-altos-xdep.c
-@item NEED_POSIX_SETPGID
-infrun.c
-@item NEED_TEXT_START_END
-exec.c
-@item NFAILURES
-regex.c
+@item
+@code{N_FUN} stabs have an address of zero. Instead, you should find the
+addresses where the function starts by taking the function name from
+the stab, and then looking that up in the minsyms (the linker/
+assembler symbol table). In other words, the stab has the name, and
+the linker / assembler symbol table is the only place that carries
+the address.
-@item NORETURN
-(in defs.h - is this really useful to define/undefine?)
-
-@item NOTDEF
-regex.c
-@item NOTDEF
-remote-adapt.c
-@item NOTDEF
-remote-mm.c
-@item NOTICE_SIGNAL_HANDLING_CHANGE
-infrun.c
-@item NO_HIF_SUPPORT
-remote-mm.c
-@item NO_JOB_CONTROL
-signals.h
-
-@item NO_MMALLOC
-GDB will use the @code{mmalloc} library for memory allocation for symbol
-reading, unless this symbol is defined. Define it on systems
-on which @code{mmalloc} does not
-work for some reason. One example is the DECstation, where its RPC
-library can't cope with our redefinition of @code{malloc} to call
-@code{mmalloc}. When defining @code{NO_MMALLOC}, you will also have
-to override the setting of @code{MMALLOC_LIB} to empty, in the Makefile.
-Therefore, this define is usually set on the command line by overriding
-@code{MMALLOC_DISABLE} in @file{config/*/*.mh}, rather than by defining
-it in @file{xm-*.h}.
-
-@item NO_MMALLOC_CHECK
-Define this if you are using @code{mmalloc}, but don't want the overhead
-of checking the heap with @code{mmcheck}.
+@item
+@code{N_SO} stabs have an address of zero, too. You just look at the
+@code{N_FUN} stabs that appear before and after the @code{N_SO} stab,
+and guess the starting and ending addresses of the compilation unit from
+them.
+
+@end itemize
-@item NO_SIGINTERRUPT
-remote-adapt.c
-@item NO_SINGLE_STEP
-infptrace.c
-@item NS32K_SVC_IMMED_OPERANDS
-ns32k-opcode.h
-@item NUMERIC_REG_NAMES
-mips-tdep.c
-@item N_SETV
-dbxread.c
-@item N_SET_MAGIC
-hppabsd-tdep.c
-@item NaN
-tm-umax.h
-@item ONE_PROCESS_WRITETEXT
-breakpoint.c
-@item O_BINARY
-exec.c
-@item O_RDONLY
-xm-ultra3.h
-@item PC
-convx-opcode.h
@item PCC_SOL_BROKEN
-dbxread.c
+(Used only in the Convex target.)
+
@item PC_IN_CALL_DUMMY
inferior.h
+
@item PC_LOAD_SEGMENT
-stack.c
-@item PRINT_RANDOM_SIGNAL
-infcmd.c
-@item PRINT_REGISTER_HOOK
-infcmd.c
+If defined, print information about the load segment for the program
+counter. (Defined only for the RS/6000.)
+
+@item PC_REGNUM
+If the program counter is kept in a register, then define this macro to
+be the number (greater than or equal to zero) of that register.
+
+This should only need to be defined if @code{TARGET_READ_PC} and
+@code{TARGET_WRITE_PC} are not defined.
+
+@item NPC_REGNUM
+The number of the ``next program counter'' register, if defined.
+
+@item NNPC_REGNUM
+The number of the ``next next program counter'' register, if defined.
+Currently, this is only defined for the Motorola 88K.
+
+@item PARM_BOUNDARY
+If non-zero, round arguments to a boundary of this many bits before
+pushing them on the stack.
+
+@item PRINT_REGISTER_HOOK (regno)
+If defined, this must be a function that prints the contents of the
+given register to standard output.
+
@item PRINT_TYPELESS_INTEGER
-valprint.c
+This is an obscure substitute for @code{print_longest} that seems to
+have been defined for the Convex target.
+
@item PROCESS_LINENUMBER_HOOK
-buildsym.c
+A hook defined for XCOFF reading.
+
@item PROLOGUE_FIRSTLINE_OVERLAP
-infrun.c
-@item PSIGNAL_IN_SIGNAL_H
-defs.h
-@item PUSH_ARGUMENTS
-valops.c
-@item PYRAMID_CONTROL_FRAME_DEBUGGING
-pyr-xdep.c
-@item PYRAMID_CORE
-pyr-xdep.c
-@item PYRAMID_PTRACE
-pyr-xdep.c
-@item REGISTER_BYTES
-remote.c
-@item REGISTER_NAMES
-tm-a29k.h
-@item REG_STACK_SEGMENT
-exec.c
-@item REG_STRUCT_HAS_ADDR
-findvar.c
-@item RE_NREGS
-regex.h
-@item R_FP
-dwarfread.c
-@item R_OK
-xm-altos.h
-@item SEEK_END
-state.c
-@item SEEK_SET
-state.c
-@item SEM
-coffread.c
+(Only used in unsupported Convex configuration.)
-@item SET_STACK_LIMIT_HUGE
-When defined, stack limits will be raised to their maximum. Use this
-if your host supports @code{setrlimit} and you have trouble with
-@code{stringtab} in @file{dbxread.c}.
-
-Also used in @file{fork-child.c} to return stack limits before child
-processes are forked.
-
-@item SHELL_COMMAND_CONCAT
-infrun.c
-@item SHELL_FILE
-infrun.c
-@item SHIFT_INST_REGS
-breakpoint.c
-@item SIGN_EXTEND_CHAR
-regex.c
-@item SIGTRAP_STOP_AFTER_LOAD
-infrun.c
-@item SKIP_TRAMPOLINE_CODE
-infrun.c
-@item SOLIB_ADD
-core.c
-@item STACK_ALIGN
-valops.c
-@item START_INFERIOR_TRAPS_EXPECTED
-infrun.c
-@item STOP_SIGNAL
-main.c
-@item SUN4_COMPILER_FEATURE
-infrun.c
-@item SUN_FIXED_LBRAC_BUG
-dbxread.c
-@item SVR4_SHARED_LIBS
-solib.c
-@item SWITCH_ENUM_BUG
-regex.c
-@item SYM1
-tm-ultra3.h
-@item SYMBOL_RELOADING_DEFAULT
-symfile.c
-@item SYNTAX_TABLE
-regex.c
-@item Sword
-regex.c
-@item TIOCGETC
-inflow.c
-@item TIOCGLTC
-inflow.c
-@item TIOCGPGRP
-inflow.c
-@item TIOCLGET
-inflow.c
-@item TIOCLSET
-inflow.c
-@item TIOCNOTTY
-inflow.c
-@item T_ARG
-coffread.c
-@item T_VOID
-coffread.c
-@item UINT_MAX
-defs.h
-@item UPAGES
-altos-xdep.c
-@item USER
-m88k-tdep.c
-@item USE_GAS
-xm-news.h
-@item USE_O_NOCTTY
-inflow.c
-@item USE_STRUCT_CONVENTION
-values.c
-
-@item USG
-Means that System V (prior to SVR4) include files are in use.
-(FIXME: This symbol is abused in @file{infrun.c}, @file{regex.c},
-@file{remote-nindy.c}, and @file{utils.c} for other things, at the moment.)
-
-@item USIZE
-xm-m88k.h
-@item U_FPSTATE
-i386-xdep.c
-@item VARIABLES_INSIDE_BLOCK
-dbxread.c
-@item WRS_ORIG
-remote-vx.c
-@item __GNUC__
-news-xdep.c
-@item __GO32__
-inflow.c
-@item __HPUX_ASM__
-xm-hp300hpux.h
-@item __INT_VARARGS_H
-printcmd.c
-@item __not_on_pyr_yet
-pyr-xdep.c
-@item alloca
-defs.h
-@item const
-defs.h
-@item GOULD_PN
-gould-pinsn.c
-@item hp800
-xm-hppabsd.h
-@item hpux
-hppabsd-core.c
-@item lint
-valarith.c
-@item longest_to_int
-defs.h
-@item mc68020
-m68k-stub.c
-@item notdef
-gould-pinsn.c
-@item ns32k_opcodeT
-ns32k-opcode.h
-@item sgi
-mips-tdep.c
-@item sparc
-regex.c
-@item sun
-m68k-tdep.c
-@item sun386
-tm-sun386.h
-@item test
-regex.c
-@item ultrix
-xm-mips.h
-@item volatile
-defs.h
-@end table
-
-@node Target Conditionals
-@chapter Target Conditionals
-
-When GDB is configured and compiled, various macros are defined or left
-undefined, to control compilation based on the attributes of the target
-system. These macros and their meanings are:
+@item PS_REGNUM
+If defined, this is the number of the processor status register. (This
+definition is only used in generic code when parsing "$ps".)
-@emph{NOTE: For now, both host and target conditionals are here.
-Eliminate host conditionals from this list as they are identified.}
+@item POP_FRAME
+Used in @samp{call_function_by_hand} to remove an artificial stack
+frame and in @samp{return_command} to remove a real stack frame.
-@table @code
+@item PUSH_ARGUMENTS (nargs, args, sp, struct_return, struct_addr)
+Define this to push arguments onto the stack for inferior function
+call. Return the updated stack pointer value.
@item PUSH_DUMMY_FRAME
Used in @samp{call_function_by_hand} to create an artificial stack frame.
-@item POP_FRAME
-Used in @samp{call_function_by_hand} to remove an artificial stack frame.
-
-@item BLOCK_ADDRESS_FUNCTION_RELATIVE
-dbxread.c
-@item KERNELDEBUG
-tm-hppa.h
-@item NO_SYS_FILE
-dbxread.c
-@item PYRAMID_CONTROL_FRAME_DEBUGGING
-pyr-xdep.c
-@item SIGWINCH_HANDLER_BODY
-utils.c
-@item ADDITIONAL_OPTIONS
-main.c
-@item ADDITIONAL_OPTION_CASES
-main.c
-@item ADDITIONAL_OPTION_HANDLER
-main.c
-@item ADDITIONAL_OPTION_HELP
-main.c
-@item ADDR_BITS_REMOVE
-defs.h
-@item ALIGN_STACK_ON_STARTUP
-main.c
-@item ALTOS
-altos-xdep.c
-@item ALTOS_AS
-xm-altos.h
-@item ASCII_COFF
-remote-adapt.c
-@item BCS
-tm-delta88.h
-@item BELIEVE_PCC_PROMOTION
-coffread.c
-@item BELIEVE_PCC_PROMOTION_TYPE
-stabsread.c
-@item BITS_BIG_ENDIAN
-defs.h
-@item BKPT_AT_MAIN
-solib.c
-@item BLOCK_ADDRESS_ABSOLUTE
-dbxread.c
-@item BPT_VECTOR
-tm-m68k.h
-@item BREAKPOINT
-tm-m68k.h
-@item CALL_DUMMY
-valops.c
-@item CALL_DUMMY_LOCATION
-inferior.h
-@item CALL_DUMMY_STACK_ADJUST
-valops.c
-@item CANNOT_FETCH_REGISTER
-hppabsd-xdep.c
-@item CANNOT_STORE_REGISTER
-findvar.c
-@item CFRONT_PRODUCER
-dwarfread.c
-@item CHILD_PREPARE_TO_STORE
-inftarg.c
-@item CLEAR_DEFERRED_STORES
-inflow.c
-@item CLEAR_SOLIB
-objfiles.c
-@item COFF_ENCAPSULATE
-hppabsd-tdep.c
-@item COFF_FORMAT
-symm-tdep.c
-@item CORE_NEEDS_RELOCATION
-stack.c
-@item CPLUS_MARKER
-cplus-dem.c
-@item C_GLBLREG
-coffread.c
-@item DBXREAD_ONLY
-partial-stab.h
-@item DBX_PARM_SYMBOL_CLASS
-stabsread.c
-@item DEBUG
-remote-adapt.c
-@item DEBUG_INFO
-partial-stab.h
-@item DEBUG_PTRACE
-hppabsd-xdep.c
-@item DECR_PC_AFTER_BREAK
-breakpoint.c
-@item DELTA88
-m88k-xdep.c
-@item DEV_TTY
-symmisc.c
-@item DGUX
-m88k-xdep.c
-@item DISABLE_UNSETTABLE_BREAK
-breakpoint.c
-@item DONT_USE_REMOTE
-remote.c
-@item DO_DEFERRED_STORES
-infrun.c
-@item DO_REGISTERS_INFO
-infcmd.c
-
-@item END_OF_TEXT_DEFAULT
-This is an expression that should designate the end of the text section
-(? FIXME ?)
-
-@item EXTRACT_RETURN_VALUE
-tm-m68k.h
-@item EXTRACT_STRUCT_VALUE_ADDRESS
-values.c
-@item EXTRA_FRAME_INFO
-frame.h
-@item EXTRA_SYMTAB_INFO
-symtab.h
-@item FILES_INFO_HOOK
-target.c
-@item FLOAT_INFO
-infcmd.c
-@item FOPEN_RB
-defs.h
-@item FP0_REGNUM
-a68v-xdep.c
-@item FPC_REGNUM
-mach386-xdep.c
-@item FP_REGNUM
-parse.c
-@item FRAMELESS_FUNCTION_INVOCATION
-blockframe.c
-@item FRAME_ARGS_ADDRESS_CORRECT
-stack.c
-
-@item FRAME_CHAIN
-Given FRAME, return a pointer to the calling frame.
-
-@item FRAME_CHAIN_COMBINE
-blockframe.c
-@item FRAME_CHAIN_VALID
-frame.h
-@item FRAME_CHAIN_VALID_ALTERNATE
-frame.h
-@item FRAME_FIND_SAVED_REGS
-stack.c
-@item FRAME_GET_BASEREG_VALUE
-frame.h
-
-@item FRAME_NUM_ARGS (val, fi)
-For the frame described by fi, set val to the number of arguments
-that are being passed.
-
-@item FRAME_SPECIFICATION_DYADIC
-stack.c
-
-@item FRAME_SAVED_PC
-Given FRAME, return the pc saved there. That is, the return address.
-
-@item FUNCTION_EPILOGUE_SIZE
-coffread.c
-@item F_OK
-xm-ultra3.h
-@item GCC2_COMPILED_FLAG_SYMBOL
-dbxread.c
-@item GCC_COMPILED_FLAG_SYMBOL
-dbxread.c
-@item GCC_MANGLE_BUG
-symtab.c
-@item GCC_PRODUCER
-dwarfread.c
-
-@item GDB_TARGET_IS_HPPA
-This determines whether horrible kludge code in dbxread.c and partial-stab.h
-is used to mangle multiple-symbol-table files from HPPA's. This should all
-be ripped out, and a scheme like elfread.c used.
-
-@item GDB_TARGET_IS_MACH386
-mach386-xdep.c
-@item GDB_TARGET_IS_SUN3
-a68v-xdep.c
-@item GDB_TARGET_IS_SUN386
-sun386-xdep.c
-
-@item GET_LONGJMP_TARGET
-For most machines, this is a target-dependent parameter. On the DECstation
-and the Iris, this is a native-dependent parameter, since <setjmp.h> is
-needed to define it.
+@item REGISTER_BYTES
+The total amount of space needed to store @value{GDBN}'s copy of the machine's
+register state.
-This macro determines the target PC address that longjmp() will jump
-to, assuming that we have just stopped at a longjmp breakpoint. It
-takes a CORE_ADDR * as argument, and stores the target PC value through
-this pointer. It examines the current state of the machine as needed.
+@item REGISTER_NAME(i)
+Return the name of register @var{i} as a string. May return @var{NULL}
+or @var{NUL} to indicate that register @var{i} is not valid.
-@item GET_SAVED_REGISTER
-findvar.c
-@item GPLUS_PRODUCER
-dwarfread.c
-@item GR64_REGNUM
-remote-adapt.c
-@item GR64_REGNUM
-remote-mm.c
-@item HANDLE_RBRAC
-partial-stab.h
-@item HAVE_68881
-m68k-tdep.c
-@item HAVE_REGISTER_WINDOWS
-findvar.c
-@item HAVE_SIGSETMASK
-main.c
-@item HAVE_TERMIO
-inflow.c
-@item HEADER_SEEK_FD
-arm-tdep.c
-@item HOSTING_ONLY
-xm-rtbsd.h
-@item HPUX_ASM
-xm-hp300hpux.h
-@item HPUX_VERSION_5
-hp300ux-xdep.c
-@item HP_OS_BUG
-infrun.c
-@item I80960
-remote-vx.c
+@item REGISTER_NAMES
+Deprecated in favor of @var{REGISTER_NAME}.
-@item IBM6000_TARGET
-Shows that we are configured for an IBM RS/6000 target. This conditional
-should be eliminated (FIXME) and replaced by feature-specific macros.
-It was introduced in haste and we are repenting at leisure.
+@item REG_STRUCT_HAS_ADDR (gcc_p, type)
+Define this to return 1 if the given type will be passed by pointer
+rather than directly.
-@item IEEE_FLOAT
-valprint.c
-@item IGNORE_SYMBOL
-dbxread.c
-@item INIT_EXTRA_FRAME_INFO
-blockframe.c
-@item INIT_EXTRA_SYMTAB_INFO
-symfile.c
-@item INIT_FRAME_PC
-blockframe.c
-@item INNER_THAN
-valops.c
-@item INT_MAX
-defs.h
-@item INT_MIN
-defs.h
-@item IN_GDB
-i960-pinsn.c
-@item IN_SIGTRAMP
-infrun.c
-@item IN_SOLIB_TRAMPOLINE
-infrun.c
-@item ISATTY
-main.c
-@item IS_TRAPPED_INTERNALVAR
-values.c
-@item KERNELDEBUG
-dbxread.c
-@item KERNEL_DEBUGGING
-tm-ultra3.h
-@item LCC_PRODUCER
-dwarfread.c
-@item LOG_FILE
-remote-adapt.c
-@item LONGERNAMES
-cplus-dem.c
-@item LONGEST
-defs.h
-@item CC_HAS_LONG_LONG
-defs.h
-@item PRINTF_HAS_LONG_LONG
-defs.h
-@item LONG_MAX
-defs.h
-@item L_LNNO32
-coffread.c
-@item MACHKERNELDEBUG
-hppabsd-tdep.c
-@item MAINTENANCE
-dwarfread.c
-@item MIPSEL
-mips-tdep.c
-@item MOTOROLA
-xm-altos.h
-@item NBPG
-altos-xdep.c
-@item NEED_POSIX_SETPGID
-infrun.c
-@item NEED_TEXT_START_END
-exec.c
-@item NNPC_REGNUM
-infrun.c
-@item NOTDEF
-remote-adapt.c
-@item NOTDEF
-remote-mm.c
-@item NOTICE_SIGNAL_HANDLING_CHANGE
-infrun.c
-@item NO_HIF_SUPPORT
-remote-mm.c
-@item NO_SIGINTERRUPT
-remote-adapt.c
-@item NO_SINGLE_STEP
-infptrace.c
-@item NPC_REGNUM
-infcmd.c
-@item NS32K_SVC_IMMED_OPERANDS
-ns32k-opcode.h
-@item NUMERIC_REG_NAMES
-mips-tdep.c
-@item N_SETV
-dbxread.c
-@item N_SET_MAGIC
-hppabsd-tdep.c
-@item NaN
-tm-umax.h
-@item ONE_PROCESS_WRITETEXT
-breakpoint.c
-@item PC
-convx-opcode.h
-@item PCC_SOL_BROKEN
-dbxread.c
-@item PC_IN_CALL_DUMMY
-inferior.h
-@item PC_LOAD_SEGMENT
-stack.c
-@item PC_REGNUM
-parse.c
-@item PRINT_RANDOM_SIGNAL
-infcmd.c
-@item PRINT_REGISTER_HOOK
-infcmd.c
-@item PRINT_TYPELESS_INTEGER
-valprint.c
-@item PROCESS_LINENUMBER_HOOK
-buildsym.c
-@item PROLOGUE_FIRSTLINE_OVERLAP
-infrun.c
-@item PSIGNAL_IN_SIGNAL_H
-defs.h
-@item PS_REGNUM
-parse.c
-@item PUSH_ARGUMENTS
-valops.c
-@item REGISTER_BYTES
-remote.c
-@item REGISTER_NAMES
-tm-a29k.h
-@item REG_STACK_SEGMENT
-exec.c
-@item REG_STRUCT_HAS_ADDR
-findvar.c
-@item R_FP
-dwarfread.c
-@item R_OK
-xm-altos.h
+@item SAVE_DUMMY_FRAME_TOS (sp)
+Used in @samp{call_function_by_hand} to notify the target dependent code
+of the top-of-stack value that will be passed to the the inferior code.
+This is the value of the @var{SP} after both the dummy frame and space
+for parameters/results have been allocated on the stack.
@item SDB_REG_TO_REGNUM
-Define this to convert sdb register numbers
-into gdb regnums. If not defined, no conversion will be done.
+Define this to convert sdb register numbers into @value{GDBN} regnums. If not
+defined, no conversion will be done.
-@item SEEK_END
-state.c
-@item SEEK_SET
-state.c
-@item SEM
-coffread.c
-@item SHELL_COMMAND_CONCAT
-infrun.c
-@item SHELL_FILE
-infrun.c
@item SHIFT_INST_REGS
-breakpoint.c
-@item SIGTRAP_STOP_AFTER_LOAD
-infrun.c
-
-@item SKIP_PROLOGUE
-A C statement that advances the PC across any function entry
-prologue instructions so as to reach ``real'' code.
+(Only used for m88k targets.)
+
+@item SKIP_PERMANENT_BREAKPOINT
+Advance the inferior's PC past a permanent breakpoint. @value{GDBN} normally
+steps over a breakpoint by removing it, stepping one instruction, and
+re-inserting the breakpoint. However, permanent breakpoints are
+hardwired into the inferior, and can't be removed, so this strategy
+doesn't work. Calling SKIP_PERMANENT_BREAKPOINT adjusts the processor's
+state so that execution will resume just after the breakpoint. This
+macro does the right thing even when the breakpoint is in the delay slot
+of a branch or jump.
+
+@item SKIP_PROLOGUE (pc)
+A C expression that returns the address of the ``real'' code beyond the
+function entry prologue found at @var{pc}.
@item SKIP_PROLOGUE_FRAMELESS_P
-A C statement that should behave similarly, but that can stop
-as soon as the function is known to have a frame.
-If not defined, @code{SKIP_PROLOGUE} will be used instead.
-
-@item SKIP_TRAMPOLINE_CODE
-infrun.c
-@item SOLIB_ADD
-core.c
+A C expression that should behave similarly, but that can stop as soon
+as the function is known to have a frame. If not defined,
+@code{SKIP_PROLOGUE} will be used instead.
+
+@item SKIP_TRAMPOLINE_CODE (pc)
+If the target machine has trampoline code that sits between callers and
+the functions being called, then define this macro to return a new PC
+that is at the start of the real function.
+
@item SP_REGNUM
-parse.c
+If the stack-pointer is kept in a register, then define this macro to be
+the number (greater than or equal to zero) of that register.
+
+This should only need to be defined if @code{TARGET_WRITE_SP} and
+@code{TARGET_WRITE_SP} are not defined.
@item STAB_REG_TO_REGNUM
-Define this to convert stab register numbers (as gotten from `r' declarations)
-into gdb regnums. If not defined, no conversion will be done.
+Define this to convert stab register numbers (as gotten from `r'
+declarations) into @value{GDBN} regnums. If not defined, no conversion will be
+done.
-@item STACK_ALIGN
-valops.c
-@item START_INFERIOR_TRAPS_EXPECTED
-infrun.c
-@item STOP_SIGNAL
-main.c
+@item STACK_ALIGN (addr)
+Define this to adjust the address to the alignment required for the
+processor's stack.
+
+@item STEP_SKIPS_DELAY (addr)
+Define this to return true if the address is of an instruction with a
+delay slot. If a breakpoint has been placed in the instruction's delay
+slot, @value{GDBN} will single-step over that instruction before resuming
+normally. Currently only defined for the Mips.
@item STORE_RETURN_VALUE (type, valbuf)
A C expression that stores a function return value of type @var{type},
where @var{valbuf} is the address of the value to be stored.
-@item SUN4_COMPILER_FEATURE
-infrun.c
@item SUN_FIXED_LBRAC_BUG
-dbxread.c
-@item SVR4_SHARED_LIBS
-solib.c
-@item SYM1
-tm-ultra3.h
+(Used only for Sun-3 and Sun-4 targets.)
+
@item SYMBOL_RELOADING_DEFAULT
-symfile.c
+The default value of the `symbol-reloading' variable. (Never defined in
+current sources.)
+
+@item TARGET_BYTE_ORDER_DEFAULT
+The ordering of bytes in the target. This must be either
+@code{BIG_ENDIAN} or @code{LITTLE_ENDIAN}. This macro replaces
+@var{TARGET_BYTE_ORDER} which is deprecated.
-@item TARGET_BYTE_ORDER
-The ordering of bytes in the target.
-This must be defined to be either @code{BIG_ENDIAN} or @code{LITTLE_ENDIAN}.
+@item TARGET_BYTE_ORDER_SELECTABLE_P
+Non-zero if the target has both @code{BIG_ENDIAN} and
+@code{LITTLE_ENDIAN} variants. This macro replaces
+@var{TARGET_BYTE_ORDER_SELECTABLE} which is deprecated.
@item TARGET_CHAR_BIT
Number of bits in a char; defaults to 8.
@item TARGET_COMPLEX_BIT
Number of bits in a complex number; defaults to @code{2 * TARGET_FLOAT_BIT}.
+At present this macro is not used.
+
@item TARGET_DOUBLE_BIT
Number of bits in a double float; defaults to @code{8 * TARGET_CHAR_BIT}.
@item TARGET_DOUBLE_COMPLEX_BIT
Number of bits in a double complex; defaults to @code{2 * TARGET_DOUBLE_BIT}.
+At present this macro is not used.
+
@item TARGET_FLOAT_BIT
Number of bits in a float; defaults to @code{4 * TARGET_CHAR_BIT}.
Number of bits in a short integer; defaults to @code{2 * TARGET_CHAR_BIT}.
@item TARGET_READ_PC
-@item TARGET_WRITE_PC
+@item TARGET_WRITE_PC (val, pid)
@item TARGET_READ_SP
@item TARGET_WRITE_SP
@item TARGET_READ_FP
@item TARGET_WRITE_FP
These change the behavior of @code{read_pc}, @code{write_pc},
@code{read_sp}, @code{write_sp}, @code{read_fp} and @code{write_fp}.
-For most targets, these may be left undefined. GDB will call the
-read and write register functions with the relevant @code{_REGNUM} argument.
+For most targets, these may be left undefined. @value{GDBN} will call the read
+and write register functions with the relevant @code{_REGNUM} argument.
These macros are useful when a target keeps one of these registers in a
-hard to get at place; for example, part in a segment register and part
+hard to get at place; for example, part in a segment register and part
in an ordinary register.
-@item T_ARG
-coffread.c
-@item T_VOID
-coffread.c
-@item UINT_MAX
-defs.h
-@item USER
-m88k-tdep.c
-@item USE_GAS
-xm-news.h
-@item USE_STRUCT_CONVENTION
-values.c
-@item USIZE
-xm-m88k.h
-@item U_FPSTATE
-i386-xdep.c
-@item VARIABLES_INSIDE_BLOCK
-dbxread.c
-@item WRS_ORIG
-remote-vx.c
-@item __GO32__
-inflow.c
-@item __HPUX_ASM__
-xm-hp300hpux.h
-@item __INT_VARARGS_H
-printcmd.c
-@item __not_on_pyr_yet
-pyr-xdep.c
-@item GOULD_PN
-gould-pinsn.c
-@item hp800
-xm-hppabsd.h
-@item hpux
-hppabsd-core.c
-@item longest_to_int
-defs.h
-@item mc68020
-m68k-stub.c
-@item ns32k_opcodeT
-ns32k-opcode.h
-@item sgi
-mips-tdep.c
-@item sun
-m68k-tdep.c
-@item sun386
-tm-sun386.h
-
-@item test
-(Define this to enable testing code in regex.c.)
+@item TARGET_VIRTUAL_FRAME_POINTER(pc,regp,offsetp)
+Returns a @code{(register, offset)} pair representing the virtual
+frame pointer in use at the code address @code{"pc"}. If virtual
+frame pointers are not used, a default definition simply returns
+@code{FP_REGNUM}, with an offset of zero.
+
+@item USE_STRUCT_CONVENTION (gcc_p, type)
+If defined, this must be an expression that is nonzero if a value of the
+given @var{type} being returned from a function must have space
+allocated for it on the stack. @var{gcc_p} is true if the function
+being considered is known to have been compiled by GCC; this is helpful
+for systems where GCC is known to use different calling convention than
+other compilers.
+
+@item VARIABLES_INSIDE_BLOCK (desc, gcc_p)
+For dbx-style debugging information, if the compiler puts variable
+declarations inside LBRAC/RBRAC blocks, this should be defined to be
+nonzero. @var{desc} is the value of @code{n_desc} from the
+@code{N_RBRAC} symbol, and @var{gcc_p} is true if @value{GDBN} has noticed the
+presence of either the @code{GCC_COMPILED_SYMBOL} or the
+@code{GCC2_COMPILED_SYMBOL}. By default, this is 0.
+
+@item OS9K_VARIABLES_INSIDE_BLOCK (desc, gcc_p)
+Similarly, for OS/9000. Defaults to 1.
@end table
-@node Native Conditionals
-@chapter Native Conditionals
-
-When GDB is configured and compiled, various macros are defined or left
-undefined, to control compilation when the host and target systems
-are the same. These macros should be defined (or left undefined)
-in @file{nm-@var{system}.h}.
+Motorola M68K target conditionals.
@table @code
-@item ATTACH_DETACH
-If defined, then gdb will include support for the @code{attach} and
-@code{detach} commands.
+@item BPT_VECTOR
+Define this to be the 4-bit location of the breakpoint trap vector. If
+not defined, it will default to @code{0xf}.
-@item FETCH_INFERIOR_REGISTERS
-Define this if the native-dependent code will provide its
-own routines
-@code{fetch_inferior_registers} and @code{store_inferior_registers} in
-@file{@var{HOST}-nat.c}.
-If this symbol is @emph{not} defined, and @file{infptrace.c}
-is included in this configuration, the default routines in
-@file{infptrace.c} are used for these functions.
+@item REMOTE_BPT_VECTOR
+Defaults to @code{1}.
-@item GET_LONGJMP_TARGET
-For most machines, this is a target-dependent parameter. On the DECstation
-and the Iris, this is a native-dependent parameter, since <setjmp.h> is
-needed to define it.
+@end table
-This macro determines the target PC address that longjmp() will jump
-to, assuming that we have just stopped at a longjmp breakpoint. It
-takes a CORE_ADDR * as argument, and stores the target PC value through
-this pointer. It examines the current state of the machine as needed.
+@section Adding a New Target
-@item PROC_NAME_FMT
-Defines the format for the name of a @file{/proc} device. Should be
-defined in @file{nm.h} @emph{only} in order to override the default
-definition in @file{procfs.c}.
+The following files define a target to @value{GDBN}:
-@item PTRACE_FP_BUG
-mach386-xdep.c
+@table @file
-@item PTRACE_ARG3_TYPE
-The type of the third argument to the @code{ptrace} system call, if it exists
-and is different from @code{int}.
+@item gdb/config/@var{arch}/@var{ttt}.mt
+Contains a Makefile fragment specific to this target. Specifies what
+object files are needed for target @var{ttt}, by defining
+@samp{TDEPFILES=@dots{}} and @samp{TDEPLIBS=@dots{}}. Also specifies
+the header file which describes @var{ttt}, by defining @samp{TM_FILE=
+tm-@var{ttt}.h}.
-@item REGISTER_U_ADDR
-Defines the offset of the registers in the ``u area''; @pxref{Host}.
+You can also define @samp{TM_CFLAGS}, @samp{TM_CLIBS}, @samp{TM_CDEPS},
+but these are now deprecated, replaced by autoconf, and may go away in
+future versions of @value{GDBN}.
-@item SOLIB_CREATE_INFERIOR_HOOK
-Define this to expand into any shared-library-relocation code
-that you want to be run just after the child process has been forked.
+@item gdb/config/@var{arch}/tm-@var{ttt}.h
+(@file{tm.h} is a link to this file, created by configure). Contains
+macro definitions about the target machine's registers, stack frame
+format and instructions.
-@item USE_PROC_FS
-This determines whether small routines in @file{*-tdep.c}, which
-translate register values
-between GDB's internal representation and the /proc representation,
-are compiled.
+@item gdb/@var{ttt}-tdep.c
+Contains any miscellaneous code required for this target machine. On
+some machines it doesn't exist at all. Sometimes the macros in
+@file{tm-@var{ttt}.h} become very complicated, so they are implemented
+as functions here instead, and the macro is simply defined to call the
+function. This is vastly preferable, since it is easier to understand
+and debug.
-@item U_REGS_OFFSET
-This is the offset of the registers in the upage. It need only be
-defined if the generic ptrace register access routines in
-@file{infptrace.c} are being used (that is,
-@file{infptrace.c} is configured in, and
-@code{FETCH_INFERIOR_REGISTERS} is not defined). If the default value
-from @file{infptrace.c} is good enough, leave it undefined.
+@item gdb/config/@var{arch}/tm-@var{arch}.h
+This often exists to describe the basic layout of the target machine's
+processor chip (registers, stack, etc). If used, it is included by
+@file{tm-@var{ttt}.h}. It can be shared among many targets that use the
+same processor.
-The default value means that u.u_ar0 @emph{points to} the location of the
-registers. I'm guessing that @code{#define U_REGS_OFFSET 0} means that
-u.u_ar0 @emph{is} the location of the registers.
+@item gdb/@var{arch}-tdep.c
+Similarly, there are often common subroutines that are shared by all
+target machines that use this particular architecture.
@end table
-@node Obsolete Conditionals
-@chapter Obsolete Conditionals
+If you are adding a new operating system for an existing CPU chip, add a
+@file{config/tm-@var{os}.h} file that describes the operating system
+facilities that are unusual (extra symbol table info; the breakpoint
+instruction needed; etc). Then write a @file{@var{arch}/tm-@var{os}.h}
+that just @code{#include}s @file{tm-@var{arch}.h} and
+@file{config/tm-@var{os}.h}.
-Fragments of old code in GDB sometimes reference or set the following
-configuration macros. They should not be used by new code, and
-old uses should be removed as those parts of the debugger are
-otherwise touched.
-@table @code
-@item STACK_END_ADDR
-This macro used to define where the end of the stack appeared, for use
-in interpreting core file formats that don't record this address in the
-core file itself. This information is now configured in BFD, and GDB
-gets the info portably from there. The values in GDB's configuration
-files should be moved into BFD configuration files (if needed there),
-and deleted from all of GDB's config files.
+@node Target Vector Definition
+
+@chapter Target Vector Definition
+
+The target vector defines the interface between @value{GDBN}'s abstract handling
+of target systems, and the nitty-gritty code that actually exercises
+control over a process or a serial port. @value{GDBN} includes some 30-40
+different target vectors; however, each configuration of @value{GDBN} includes
+only a few of them.
+
+@section File Targets
+
+Both executables and core files have target vectors.
+
+@section Standard Protocol and Remote Stubs
+
+@value{GDBN}'s file @file{remote.c} talks a serial protocol to code that runs in
+the target system. @value{GDBN} provides several sample ``stubs'' that can be
+integrated into target programs or operating systems for this purpose;
+they are named @file{*-stub.c}.
+
+The @value{GDBN} user's manual describes how to put such a stub into your target
+code. What follows is a discussion of integrating the SPARC stub into a
+complicated operating system (rather than a simple program), by Stu
+Grossman, the author of this stub.
+
+The trap handling code in the stub assumes the following upon entry to
+trap_low:
+
+@enumerate
+
+@item %l1 and %l2 contain pc and npc respectively at the time of the trap
+
+@item traps are disabled
+
+@item you are in the correct trap window
+
+@end enumerate
+
+As long as your trap handler can guarantee those conditions, then there
+is no reason why you shouldn't be able to `share' traps with the stub.
+The stub has no requirement that it be jumped to directly from the
+hardware trap vector. That is why it calls @code{exceptionHandler()},
+which is provided by the external environment. For instance, this could
+setup the hardware traps to actually execute code which calls the stub
+first, and then transfers to its own trap handler.
+
+For the most point, there probably won't be much of an issue with
+`sharing' traps, as the traps we use are usually not used by the kernel,
+and often indicate unrecoverable error conditions. Anyway, this is all
+controlled by a table, and is trivial to modify. The most important
+trap for us is for @code{ta 1}. Without that, we can't single step or
+do breakpoints. Everything else is unnecessary for the proper operation
+of the debugger/stub.
+
+From reading the stub, it's probably not obvious how breakpoints work.
+They are simply done by deposit/examine operations from @value{GDBN}.
+
+@section ROM Monitor Interface
+
+@section Custom Protocols
+
+@section Transport Layer
+
+@section Builtin Simulator
+
+
+@node Native Debugging
+
+@chapter Native Debugging
+
+Several files control @value{GDBN}'s configuration for native support:
+
+@table @file
+
+@item gdb/config/@var{arch}/@var{xyz}.mh
+Specifies Makefile fragments needed when hosting @emph{or native} on
+machine @var{xyz}. In particular, this lists the required
+native-dependent object files, by defining @samp{NATDEPFILES=@dots{}}.
+Also specifies the header file which describes native support on
+@var{xyz}, by defining @samp{NAT_FILE= nm-@var{xyz}.h}. You can also
+define @samp{NAT_CFLAGS}, @samp{NAT_ADD_FILES}, @samp{NAT_CLIBS},
+@samp{NAT_CDEPS}, etc.; see @file{Makefile.in}.
+
+@item gdb/config/@var{arch}/nm-@var{xyz}.h
+(@file{nm.h} is a link to this file, created by configure). Contains C
+macro definitions describing the native system environment, such as
+child process control and core file support.
+
+@item gdb/@var{xyz}-nat.c
+Contains any miscellaneous C code required for this native support of
+this machine. On some machines it doesn't exist at all.
-Any @file{@var{foo}-xdep.c} file that references STACK_END_ADDR
-is so old that it has never been converted to use BFD. Now that's old!
@end table
-@node XCOFF
-@chapter The XCOFF Object File Format
+There are some ``generic'' versions of routines that can be used by
+various systems. These can be customized in various ways by macros
+defined in your @file{nm-@var{xyz}.h} file. If these routines work for
+the @var{xyz} host, you can just include the generic file's name (with
+@samp{.o}, not @samp{.c}) in @code{NATDEPFILES}.
-The IBM RS/6000 running AIX uses an object file format called xcoff.
-The COFF sections, symbols, and line numbers are used, but debugging
-symbols are dbx-style stabs whose strings are located in the
-@samp{.debug} section (rather than the string table). For more
-information, @xref{Top,,,stabs,The Stabs Debugging Format}, and search
-for XCOFF.
+Otherwise, if your machine needs custom support routines, you will need
+to write routines that perform the same functions as the generic file.
+Put them into @code{@var{xyz}-nat.c}, and put @code{@var{xyz}-nat.o}
+into @code{NATDEPFILES}.
-The shared library scheme has a nice clean interface for figuring out
-what shared libraries are in use, but the catch is that everything which
-refers to addresses (symbol tables and breakpoints at least) needs to be
-relocated for both shared libraries and the main executable. At least
-using the standard mechanism this can only be done once the program has
-been run (or the core file has been read).
+@table @file
+
+@item inftarg.c
+This contains the @emph{target_ops vector} that supports Unix child
+processes on systems which use ptrace and wait to control the child.
+
+@item procfs.c
+This contains the @emph{target_ops vector} that supports Unix child
+processes on systems which use /proc to control the child.
+
+@item fork-child.c
+This does the low-level grunge that uses Unix system calls to do a "fork
+and exec" to start up a child process.
+
+@item infptrace.c
+This is the low level interface to inferior processes for systems using
+the Unix @code{ptrace} call in a vanilla way.
+
+@end table
+
+@section Native core file Support
+
+@table @file
+
+@item core-aout.c::fetch_core_registers()
+Support for reading registers out of a core file. This routine calls
+@code{register_addr()}, see below. Now that BFD is used to read core
+files, virtually all machines should use @code{core-aout.c}, and should
+just provide @code{fetch_core_registers} in @code{@var{xyz}-nat.c} (or
+@code{REGISTER_U_ADDR} in @code{nm-@var{xyz}.h}).
+
+@item core-aout.c::register_addr()
+If your @code{nm-@var{xyz}.h} file defines the macro
+@code{REGISTER_U_ADDR(addr, blockend, regno)}, it should be defined to
+set @code{addr} to the offset within the @samp{user} struct of @value{GDBN}
+register number @code{regno}. @code{blockend} is the offset within the
+``upage'' of @code{u.u_ar0}. If @code{REGISTER_U_ADDR} is defined,
+@file{core-aout.c} will define the @code{register_addr()} function and
+use the macro in it. If you do not define @code{REGISTER_U_ADDR}, but
+you are using the standard @code{fetch_core_registers()}, you will need
+to define your own version of @code{register_addr()}, put it into your
+@code{@var{xyz}-nat.c} file, and be sure @code{@var{xyz}-nat.o} is in
+the @code{NATDEPFILES} list. If you have your own
+@code{fetch_core_registers()}, you may not need a separate
+@code{register_addr()}. Many custom @code{fetch_core_registers()}
+implementations simply locate the registers themselves.@refill
+
+@end table
+
+When making @value{GDBN} run native on a new operating system, to make it
+possible to debug core files, you will need to either write specific
+code for parsing your OS's core files, or customize
+@file{bfd/trad-core.c}. First, use whatever @code{#include} files your
+machine uses to define the struct of registers that is accessible
+(possibly in the u-area) in a core file (rather than
+@file{machine/reg.h}), and an include file that defines whatever header
+exists on a core file (e.g. the u-area or a @samp{struct core}). Then
+modify @code{trad_unix_core_file_p()} to use these values to set up the
+section information for the data segment, stack segment, any other
+segments in the core file (perhaps shared library contents or control
+information), ``registers'' segment, and if there are two discontiguous
+sets of registers (e.g. integer and float), the ``reg2'' segment. This
+section information basically delimits areas in the core file in a
+standard way, which the section-reading routines in BFD know how to seek
+around in.
+
+Then back in @value{GDBN}, you need a matching routine called
+@code{fetch_core_registers()}. If you can use the generic one, it's in
+@file{core-aout.c}; if not, it's in your @file{@var{xyz}-nat.c} file.
+It will be passed a char pointer to the entire ``registers'' segment,
+its length, and a zero; or a char pointer to the entire ``regs2''
+segment, its length, and a 2. The routine should suck out the supplied
+register values and install them into @value{GDBN}'s ``registers'' array.
+
+If your system uses @file{/proc} to control processes, and uses ELF
+format core files, then you may be able to use the same routines for
+reading the registers out of processes and out of core files.
+
+@section ptrace
+
+@section /proc
+
+@section win32
+
+@section shared libraries
+
+@section Native Conditionals
+
+When @value{GDBN} is configured and compiled, various macros are defined or left
+undefined, to control compilation when the host and target systems are
+the same. These macros should be defined (or left undefined) in
+@file{nm-@var{system}.h}.
+
+@table @code
+
+@item ATTACH_DETACH
+If defined, then @value{GDBN} will include support for the @code{attach} and
+@code{detach} commands.
+
+@item CHILD_PREPARE_TO_STORE
+If the machine stores all registers at once in the child process, then
+define this to ensure that all values are correct. This usually entails
+a read from the child.
+
+[Note that this is incorrectly defined in @file{xm-@var{system}.h} files
+currently.]
+
+@item FETCH_INFERIOR_REGISTERS
+Define this if the native-dependent code will provide its own routines
+@code{fetch_inferior_registers} and @code{store_inferior_registers} in
+@file{@var{HOST}-nat.c}. If this symbol is @emph{not} defined, and
+@file{infptrace.c} is included in this configuration, the default
+routines in @file{infptrace.c} are used for these functions.
+
+@item FILES_INFO_HOOK
+(Only defined for Convex.)
+
+@item FP0_REGNUM
+This macro is normally defined to be the number of the first floating
+point register, if the machine has such registers. As such, it would
+appear only in target-specific code. However, /proc support uses this
+to decide whether floats are in use on this target.
+
+@item GET_LONGJMP_TARGET
+For most machines, this is a target-dependent parameter. On the
+DECstation and the Iris, this is a native-dependent parameter, since
+<setjmp.h> is needed to define it.
+
+This macro determines the target PC address that longjmp() will jump to,
+assuming that we have just stopped at a longjmp breakpoint. It takes a
+CORE_ADDR * as argument, and stores the target PC value through this
+pointer. It examines the current state of the machine as needed.
+
+@item KERNEL_U_ADDR
+Define this to the address of the @code{u} structure (the ``user
+struct'', also known as the ``u-page'') in kernel virtual memory. @value{GDBN}
+needs to know this so that it can subtract this address from absolute
+addresses in the upage, that are obtained via ptrace or from core files.
+On systems that don't need this value, set it to zero.
+
+@item KERNEL_U_ADDR_BSD
+Define this to cause @value{GDBN} to determine the address of @code{u} at
+runtime, by using Berkeley-style @code{nlist} on the kernel's image in
+the root directory.
+
+@item KERNEL_U_ADDR_HPUX
+Define this to cause @value{GDBN} to determine the address of @code{u} at
+runtime, by using HP-style @code{nlist} on the kernel's image in the
+root directory.
+
+@item ONE_PROCESS_WRITETEXT
+Define this to be able to, when a breakpoint insertion fails, warn the
+user that another process may be running with the same executable.
+
+@item PREPARE_TO_PROCEED @var{select_it}
+This (ugly) macro allows a native configuration to customize the way the
+@code{proceed} function in @file{infrun.c} deals with switching between
+threads.
+
+In a multi-threaded task we may select another thread and then continue
+or step. But if the old thread was stopped at a breakpoint, it will
+immediately cause another breakpoint stop without any execution (i.e. it
+will report a breakpoint hit incorrectly). So @value{GDBN} must step over it
+first.
+
+If defined, @code{PREPARE_TO_PROCEED} should check the current thread
+against the thread that reported the most recent event. If a step-over
+is required, it returns TRUE. If @var{select_it} is non-zero, it should
+reselect the old thread.
+
+@item PROC_NAME_FMT
+Defines the format for the name of a @file{/proc} device. Should be
+defined in @file{nm.h} @emph{only} in order to override the default
+definition in @file{procfs.c}.
+
+@item PTRACE_FP_BUG
+mach386-xdep.c
+
+@item PTRACE_ARG3_TYPE
+The type of the third argument to the @code{ptrace} system call, if it
+exists and is different from @code{int}.
+
+@item REGISTER_U_ADDR
+Defines the offset of the registers in the ``u area''.
+
+@item SHELL_COMMAND_CONCAT
+If defined, is a string to prefix on the shell command used to start the
+inferior.
+
+@item SHELL_FILE
+If defined, this is the name of the shell to use to run the inferior.
+Defaults to @code{"/bin/sh"}.
+
+@item SOLIB_ADD (filename, from_tty, targ)
+Define this to expand into an expression that will cause the symbols in
+@var{filename} to be added to @value{GDBN}'s symbol table.
+
+@item SOLIB_CREATE_INFERIOR_HOOK
+Define this to expand into any shared-library-relocation code that you
+want to be run just after the child process has been forked.
+
+@item START_INFERIOR_TRAPS_EXPECTED
+When starting an inferior, @value{GDBN} normally expects to trap twice; once when
+the shell execs, and once when the program itself execs. If the actual
+number of traps is something other than 2, then define this macro to
+expand into the number expected.
+
+@item SVR4_SHARED_LIBS
+Define this to indicate that SVR4-style shared libraries are in use.
+
+@item USE_PROC_FS
+This determines whether small routines in @file{*-tdep.c}, which
+translate register values between @value{GDBN}'s internal representation and the
+/proc representation, are compiled.
+
+@item U_REGS_OFFSET
+This is the offset of the registers in the upage. It need only be
+defined if the generic ptrace register access routines in
+@file{infptrace.c} are being used (that is, @file{infptrace.c} is
+configured in, and @code{FETCH_INFERIOR_REGISTERS} is not defined). If
+the default value from @file{infptrace.c} is good enough, leave it
+undefined.
+
+The default value means that u.u_ar0 @emph{points to} the location of
+the registers. I'm guessing that @code{#define U_REGS_OFFSET 0} means
+that u.u_ar0 @emph{is} the location of the registers.
+
+@item CLEAR_SOLIB
+objfiles.c
+
+@item DEBUG_PTRACE
+Define this to debug ptrace calls.
+
+@end table
+
+
+@node Support Libraries
+
+@chapter Support Libraries
+
+@section BFD
+
+BFD provides support for @value{GDBN} in several ways:
+
+@table @emph
+
+@item identifying executable and core files
+BFD will identify a variety of file types, including a.out, coff, and
+several variants thereof, as well as several kinds of core files.
+
+@item access to sections of files
+BFD parses the file headers to determine the names, virtual addresses,
+sizes, and file locations of all the various named sections in files
+(such as the text section or the data section). @value{GDBN} simply calls BFD to
+read or write section X at byte offset Y for length Z.
+
+@item specialized core file support
+BFD provides routines to determine the failing command name stored in a
+core file, the signal with which the program failed, and whether a core
+file matches (i.e. could be a core dump of) a particular executable
+file.
+
+@item locating the symbol information
+@value{GDBN} uses an internal interface of BFD to determine where to find the
+symbol information in an executable file or symbol-file. @value{GDBN} itself
+handles the reading of symbols, since BFD does not ``understand'' debug
+symbols, but @value{GDBN} uses BFD's cached information to find the symbols,
+string table, etc.
+
+@end table
+
+@section opcodes
+
+The opcodes library provides @value{GDBN}'s disassembler. (It's a separate
+library because it's also used in binutils, for @file{objdump}).
+
+@section readline
+
+@section mmalloc
+
+@section libiberty
+
+@section gnu-regex
+
+Regex conditionals.
+
+@table @code
+
+@item C_ALLOCA
+
+@item NFAILURES
+
+@item RE_NREGS
+
+@item SIGN_EXTEND_CHAR
+
+@item SWITCH_ENUM_BUG
+
+@item SYNTAX_TABLE
+
+@item Sword
+
+@item sparc
+
+@end table
+
+@section include
+
+@node Coding
+
+@chapter Coding
+
+This chapter covers topics that are lower-level than the major
+algorithms of @value{GDBN}.
+
+@section Cleanups
+
+Cleanups are a structured way to deal with things that need to be done
+later. When your code does something (like @code{malloc} some memory,
+or open a file) that needs to be undone later (e.g. free the memory or
+close the file), it can make a cleanup. The cleanup will be done at
+some future point: when the command is finished, when an error occurs,
+or when your code decides it's time to do cleanups.
+
+You can also discard cleanups, that is, throw them away without doing
+what they say. This is only done if you ask that it be done.
+
+Syntax:
+
+@table @code
+
+@item struct cleanup *@var{old_chain};
+Declare a variable which will hold a cleanup chain handle.
+
+@item @var{old_chain} = make_cleanup (@var{function}, @var{arg});
+Make a cleanup which will cause @var{function} to be called with
+@var{arg} (a @code{char *}) later. The result, @var{old_chain}, is a
+handle that can be passed to @code{do_cleanups} or
+@code{discard_cleanups} later. Unless you are going to call
+@code{do_cleanups} or @code{discard_cleanups} yourself, you can ignore
+the result from @code{make_cleanup}.
+
+@item do_cleanups (@var{old_chain});
+Perform all cleanups done since @code{make_cleanup} returned
+@var{old_chain}. E.g.:
+@example
+make_cleanup (a, 0);
+old = make_cleanup (b, 0);
+do_cleanups (old);
+@end example
+@noindent
+will call @code{b()} but will not call @code{a()}. The cleanup that
+calls @code{a()} will remain in the cleanup chain, and will be done
+later unless otherwise discarded.@refill
+
+@item discard_cleanups (@var{old_chain});
+Same as @code{do_cleanups} except that it just removes the cleanups from
+the chain and does not call the specified functions.
+
+@end table
+
+Some functions, e.g. @code{fputs_filtered()} or @code{error()}, specify
+that they ``should not be called when cleanups are not in place''. This
+means that any actions you need to reverse in the case of an error or
+interruption must be on the cleanup chain before you call these
+functions, since they might never return to your code (they
+@samp{longjmp} instead).
+
+@section Wrapping Output Lines
+
+Output that goes through @code{printf_filtered} or @code{fputs_filtered}
+or @code{fputs_demangled} needs only to have calls to @code{wrap_here}
+added in places that would be good breaking points. The utility
+routines will take care of actually wrapping if the line width is
+exceeded.
+
+The argument to @code{wrap_here} is an indentation string which is
+printed @emph{only} if the line breaks there. This argument is saved
+away and used later. It must remain valid until the next call to
+@code{wrap_here} or until a newline has been printed through the
+@code{*_filtered} functions. Don't pass in a local variable and then
+return!
+
+It is usually best to call @code{wrap_here()} after printing a comma or
+space. If you call it before printing a space, make sure that your
+indentation properly accounts for the leading space that will print if
+the line wraps there.
+
+Any function or set of functions that produce filtered output must
+finish by printing a newline, to flush the wrap buffer, before switching
+to unfiltered (``@code{printf}'') output. Symbol reading routines that
+print warnings are a good example.
+
+@section @value{GDBN} Coding Standards
+
+@value{GDBN} follows the GNU coding standards, as described in
+@file{etc/standards.texi}. This file is also available for anonymous
+FTP from GNU archive sites. @value{GDBN} takes a strict interpretation of the
+standard; in general, when the GNU standard recommends a practice but
+does not require it, @value{GDBN} requires it.
+
+@value{GDBN} follows an additional set of coding standards specific to @value{GDBN},
+as described in the following sections.
+
+You can configure with @samp{--enable-build-warnings} or
+@samp{--enable-gdb-build-warnings} to get GCC to check on a number of
+these rules. @value{GDBN} sources ought not to engender any complaints,
+unless they are caused by bogus host systems. (The exact set of enabled
+warnings is currently @samp{-Wimplicit -Wreturn-type -Wcomment
+-Wtrigraphs -Wformat -Wparentheses -Wpointer-arith -Wuninitialized}.
+
+@subsection Formatting
+
+The standard GNU recommendations for formatting must be followed
+strictly.
+
+Note that while in a definition, the function's name must be in column
+zero; in a function declaration, the name must be on the same line as
+the return type.
+
+In addition, there must be a space between a function or macro name and
+the opening parenthesis of its argument list (except for macro
+definitions, as required by C). There must not be a space after an open
+paren/bracket or before a close paren/bracket.
+
+While additional whitespace is generally helpful for reading, do not use
+more than one blank line to separate blocks, and avoid adding whitespace
+after the end of a program line (as of 1/99, some 600 lines had whitespace
+after the semicolon). Excess whitespace causes difficulties for diff and
+patch.
+
+@subsection Comments
+
+The standard GNU requirements on comments must be followed strictly.
+
+Block comments must appear in the following form, with no `/*'- or
+'*/'-only lines, and no leading `*':
+
+@example @code
+/* Wait for control to return from inferior to debugger. If inferior
+ gets a signal, we may decide to start it up again instead of
+ returning. That is why there is a loop in this function. When
+ this function actually returns it means the inferior should be left
+ stopped and @value{GDBN} should read more commands. */
+@end example
+
+(Note that this format is encouraged by Emacs; tabbing for a multi-line
+comment works correctly, and M-Q fills the block consistently.)
+
+Put a blank line between the block comments preceding function or
+variable definitions, and the definition itself.
+
+In general, put function-body comments on lines by themselves, rather
+than trying to fit them into the 20 characters left at the end of a
+line, since either the comment or the code will inevitably get longer
+than will fit, and then somebody will have to move it anyhow.
+
+@subsection C Usage
+
+Code must not depend on the sizes of C data types, the format of the
+host's floating point numbers, the alignment of anything, or the order
+of evaluation of expressions.
+
+Use functions freely. There are only a handful of compute-bound areas
+in @value{GDBN} that might be affected by the overhead of a function call, mainly
+in symbol reading. Most of @value{GDBN}'s performance is limited by the target
+interface (whether serial line or system call).
+
+However, use functions with moderation. A thousand one-line functions
+are just as hard to understand as a single thousand-line function.
+
+@subsection Function Prototypes
+
+Prototypes must be used to @emph{declare} functions, and may be used to
+@emph{define} them. Prototypes for @value{GDBN} functions must include both the
+argument type and name, with the name matching that used in the actual
+function definition.
+
+All external functions should have a declaration in a header file that
+callers include, except for @code{_initialize_*} functions, which must
+be external so that @file{init.c} construction works, but shouldn't be
+visible to random source files.
+
+All static functions must be declared in a block near the top of the
+source file.
+
+@subsection Clean Design
+
+In addition to getting the syntax right, there's the little question of
+semantics. Some things are done in certain ways in @value{GDBN} because long
+experience has shown that the more obvious ways caused various kinds of
+trouble.
+
+You can't assume the byte order of anything that comes from a target
+(including @var{value}s, object files, and instructions). Such things
+must be byte-swapped using @code{SWAP_TARGET_AND_HOST} in @value{GDBN}, or one of
+the swap routines defined in @file{bfd.h}, such as @code{bfd_get_32}.
+
+You can't assume that you know what interface is being used to talk to
+the target system. All references to the target must go through the
+current @code{target_ops} vector.
+
+You can't assume that the host and target machines are the same machine
+(except in the ``native'' support modules). In particular, you can't
+assume that the target machine's header files will be available on the
+host machine. Target code must bring along its own header files --
+written from scratch or explicitly donated by their owner, to avoid
+copyright problems.
+
+Insertion of new @code{#ifdef}'s will be frowned upon. It's much better
+to write the code portably than to conditionalize it for various
+systems.
+
+New @code{#ifdef}'s which test for specific compilers or manufacturers
+or operating systems are unacceptable. All @code{#ifdef}'s should test
+for features. The information about which configurations contain which
+features should be segregated into the configuration files. Experience
+has proven far too often that a feature unique to one particular system
+often creeps into other systems; and that a conditional based on some
+predefined macro for your current system will become worthless over
+time, as new versions of your system come out that behave differently
+with regard to this feature.
+
+Adding code that handles specific architectures, operating systems,
+target interfaces, or hosts, is not acceptable in generic code. If a
+hook is needed at that point, invent a generic hook and define it for
+your configuration, with something like:
+
+@example
+#ifdef WRANGLE_SIGNALS
+ WRANGLE_SIGNALS (signo);
+#endif
+@end example
+
+In your host, target, or native configuration file, as appropriate,
+define @code{WRANGLE_SIGNALS} to do the machine-dependent thing. Take a
+bit of care in defining the hook, so that it can be used by other ports
+in the future, if they need a hook in the same place.
+
+If the hook is not defined, the code should do whatever "most" machines
+want. Using @code{#ifdef}, as above, is the preferred way to do this,
+but sometimes that gets convoluted, in which case use
+
+@example
+#ifndef SPECIAL_FOO_HANDLING
+#define SPECIAL_FOO_HANDLING(pc, sp) (0)
+#endif
+@end example
+
+where the macro is used or in an appropriate header file.
+
+Whether to include a @dfn{small} hook, a hook around the exact pieces of
+code which are system-dependent, or whether to replace a whole function
+with a hook depends on the case. A good example of this dilemma can be
+found in @code{get_saved_register}. All machines that @value{GDBN} 2.8 ran on
+just needed the @code{FRAME_FIND_SAVED_REGS} hook to find the saved
+registers. Then the SPARC and Pyramid came along, and
+@code{HAVE_REGISTER_WINDOWS} and @code{REGISTER_IN_WINDOW_P} were
+introduced. Then the 29k and 88k required the @code{GET_SAVED_REGISTER}
+hook. The first three are examples of small hooks; the latter replaces
+a whole function. In this specific case, it is useful to have both
+kinds; it would be a bad idea to replace all the uses of the small hooks
+with @code{GET_SAVED_REGISTER}, since that would result in much
+duplicated code. Other times, duplicating a few lines of code here or
+there is much cleaner than introducing a large number of small hooks.
+
+Another way to generalize @value{GDBN} along a particular interface is with an
+attribute struct. For example, @value{GDBN} has been generalized to handle
+multiple kinds of remote interfaces -- not by #ifdef's everywhere, but
+by defining the "target_ops" structure and having a current target (as
+well as a stack of targets below it, for memory references). Whenever
+something needs to be done that depends on which remote interface we are
+using, a flag in the current target_ops structure is tested (e.g.
+`target_has_stack'), or a function is called through a pointer in the
+current target_ops structure. In this way, when a new remote interface
+is added, only one module needs to be touched -- the one that actually
+implements the new remote interface. Other examples of
+attribute-structs are BFD access to multiple kinds of object file
+formats, or @value{GDBN}'s access to multiple source languages.
+
+Please avoid duplicating code. For example, in @value{GDBN} 3.x all the code
+interfacing between @code{ptrace} and the rest of @value{GDBN} was duplicated in
+@file{*-dep.c}, and so changing something was very painful. In @value{GDBN} 4.x,
+these have all been consolidated into @file{infptrace.c}.
+@file{infptrace.c} can deal with variations between systems the same way
+any system-independent file would (hooks, #if defined, etc.), and
+machines which are radically different don't need to use infptrace.c at
+all.
+
+Don't put debugging printfs in the code.
+
+@node Porting GDB
+
+@chapter Porting @value{GDBN}
+
+Most of the work in making @value{GDBN} compile on a new machine is in specifying
+the configuration of the machine. This is done in a dizzying variety of
+header files and configuration scripts, which we hope to make more
+sensible soon. Let's say your new host is called an @var{xyz} (e.g.
+@samp{sun4}), and its full three-part configuration name is
+@code{@var{arch}-@var{xvend}-@var{xos}} (e.g. @samp{sparc-sun-sunos4}).
+In particular:
+
+In the top level directory, edit @file{config.sub} and add @var{arch},
+@var{xvend}, and @var{xos} to the lists of supported architectures,
+vendors, and operating systems near the bottom of the file. Also, add
+@var{xyz} as an alias that maps to
+@code{@var{arch}-@var{xvend}-@var{xos}}. You can test your changes by
+running
+
+@example
+./config.sub @var{xyz}
+@end example
+@noindent
+and
+@example
+./config.sub @code{@var{arch}-@var{xvend}-@var{xos}}
+@end example
+@noindent
+which should both respond with @code{@var{arch}-@var{xvend}-@var{xos}}
+and no error messages.
+
+You need to port BFD, if that hasn't been done already. Porting BFD is
+beyond the scope of this manual.
+
+To configure @value{GDBN} itself, edit @file{gdb/configure.host} to recognize
+your system and set @code{gdb_host} to @var{xyz}, and (unless your
+desired target is already available) also edit @file{gdb/configure.tgt},
+setting @code{gdb_target} to something appropriate (for instance,
+@var{xyz}).
+
+Finally, you'll need to specify and define @value{GDBN}'s host-, native-, and
+target-dependent @file{.h} and @file{.c} files used for your
+configuration.
+
+@section Configuring @value{GDBN} for Release
+
+From the top level directory (containing @file{gdb}, @file{bfd},
+@file{libiberty}, and so on):
+@example
+make -f Makefile.in gdb.tar.gz
+@end example
+
+This will properly configure, clean, rebuild any files that are
+distributed pre-built (e.g. @file{c-exp.tab.c} or @file{refcard.ps}),
+and will then make a tarfile. (If the top level directory has already
+been configured, you can just do @code{make gdb.tar.gz} instead.)
+
+This procedure requires:
+@itemize @bullet
+@item symbolic links
+@item @code{makeinfo} (texinfo2 level)
+@item @TeX{}
+@item @code{dvips}
+@item @code{yacc} or @code{bison}
+@end itemize
+@noindent
+@dots{} and the usual slew of utilities (@code{sed}, @code{tar}, etc.).
+
+@subheading TEMPORARY RELEASE PROCEDURE FOR DOCUMENTATION
+
+@file{gdb.texinfo} is currently marked up using the texinfo-2 macros,
+which are not yet a default for anything (but we have to start using
+them sometime).
+
+For making paper, the only thing this implies is the right generation of
+@file{texinfo.tex} needs to be included in the distribution.
+
+For making info files, however, rather than duplicating the texinfo2
+distribution, generate @file{gdb-all.texinfo} locally, and include the
+files @file{gdb.info*} in the distribution. Note the plural;
+@code{makeinfo} will split the document into one overall file and five
+or so included files.
+
+@node Testsuite
+
+@chapter Testsuite
+
+The testsuite is an important component of the @value{GDBN} package. While it is
+always worthwhile to encourage user testing, in practice this is rarely
+sufficient; users typically use only a small subset of the available
+commands, and it has proven all too common for a change to cause a
+significant regression that went unnoticed for some time.
+
+The @value{GDBN} testsuite uses the DejaGNU testing framework. DejaGNU is built
+using tcl and expect. The tests themselves are calls to various tcl
+procs; the framework runs all the procs and summarizes the passes and
+fails.
+
+@section Using the Testsuite
+
+To run the testsuite, simply go to the @value{GDBN} object directory (or to the
+testsuite's objdir) and type @code{make check}. This just sets up some
+environment variables and invokes DejaGNU's @code{runtest} script. While
+the testsuite is running, you'll get mentions of which test file is in use,
+and a mention of any unexpected passes or fails. When the testsuite is
+finished, you'll get a summary that looks like this:
+@example
+ === gdb Summary ===
+
+# of expected passes 6016
+# of unexpected failures 58
+# of unexpected successes 5
+# of expected failures 183
+# of unresolved testcases 3
+# of untested testcases 5
+@end example
+The ideal test run consists of expected passes only; however, reality
+conspires to keep us from this ideal. Unexpected failures indicate
+real problems, whether in @value{GDBN} or in the testsuite. Expected failures
+are still failures, but ones which have been decided are too hard to
+deal with at the time; for instance, a test case might work everywhere
+except on AIX, and there is no prospect of the AIX case being fixed in
+the near future. Expected failures should not be added lightly, since
+you may be masking serious bugs in @value{GDBN}. Unexpected successes are expected
+fails that are passing for some reason, while unresolved and untested
+cases often indicate some minor catastrophe, such as the compiler being
+unable to deal with a test program.
+
+When making any significant change to @value{GDBN}, you should run the testsuite
+before and after the change, to confirm that there are no regressions.
+Note that truly complete testing would require that you run the
+testsuite with all supported configurations and a variety of compilers;
+however this is more than really necessary. In many cases testing with
+a single configuration is sufficient. Other useful options are to test
+one big-endian (Sparc) and one little-endian (x86) host, a cross config
+with a builtin simulator (powerpc-eabi, mips-elf), or a 64-bit host
+(Alpha).
+
+If you add new functionality to @value{GDBN}, please consider adding tests for it
+as well; this way future @value{GDBN} hackers can detect and fix their changes
+that break the functionality you added. Similarly, if you fix a bug
+that was not previously reported as a test failure, please add a test
+case for it. Some cases are extremely difficult to test, such as code
+that handles host OS failures or bugs in particular versions of
+compilers, and it's OK not to try to write tests for all of those.
+
+@section Testsuite Organization
+
+The testsuite is entirely contained in @file{gdb/testsuite}. While the
+testsuite includes some makefiles and configury, these are very minimal,
+and used for little besides cleaning up, since the tests themselves
+handle the compilation of the programs that @value{GDBN} will run. The file
+@file{testsuite/lib/gdb.exp} contains common utility procs useful for
+all @value{GDBN} tests, while the directory @file{testsuite/config} contains
+configuration-specific files, typically used for special-purpose
+definitions of procs like @code{gdb_load} and @code{gdb_start}.
+
+The tests themselves are to be found in @file{testsuite/gdb.*} and
+subdirectories of those. The names of the test files must always end
+with @file{.exp}. DejaGNU collects the test files by wildcarding
+in the test directories, so both subdirectories and individual files
+get chosen and run in alphabetical order.
+
+The following table lists the main types of subdirectories and what they
+are for. Since DejaGNU finds test files no matter where they are
+located, and since each test file sets up its own compilation and
+execution environment, this organization is simply for convenience and
+intelligibility.
+
+@table @code
+
+@item gdb.base
+
+This is the base testsuite. The tests in it should apply to all
+configurations of @value{GDBN} (but generic native-only tests may live here).
+The test programs should be in the subset of C that is valid K&R,
+ANSI/ISO, and C++ (ifdefs are allowed if necessary, for instance
+for prototypes).
+
+@item gdb.@var{lang}
+
+Language-specific tests for all languages besides C. Examples are
+@file{gdb.c++} and @file{gdb.java}.
+
+@item gdb.@var{platform}
+
+Non-portable tests. The tests are specific to a specific configuration
+(host or target), such as HP-UX or eCos. Example is @file{gdb.hp}, for
+HP-UX.
+
+@item gdb.@var{compiler}
+
+Tests specific to a particular compiler. As of this writing (June
+1999), there aren't currently any groups of tests in this category that
+couldn't just as sensibly be made platform-specific, but one could
+imagine a gdb.gcc, for tests of @value{GDBN}'s handling of GCC extensions.
+
+@item gdb.@var{subsystem}
+
+Tests that exercise a specific @value{GDBN} subsystem in more depth. For
+instance, @file{gdb.disasm} exercises various disassemblers, while
+@file{gdb.stabs} tests pathways through the stabs symbol reader.
+
+@end table
+
+@section Writing Tests
+
+In many areas, the @value{GDBN} tests are already quite comprehensive; you
+should be able to copy existing tests to handle new cases.
+
+You should try to use @code{gdb_test} whenever possible, since it
+includes cases to handle all the unexpected errors that might happen.
+However, it doesn't cost anything to add new test procedures; for
+instance, @file{gdb.base/exprs.exp} defines a @code{test_expr} that
+calls @code{gdb_test} multiple times.
+
+Only use @code{send_gdb} and @code{gdb_expect} when absolutely
+necessary, such as when @value{GDBN} has several valid responses to a command.
+
+The source language programs do @emph{not} need to be in a consistent
+style. Since @value{GDBN} is used to debug programs written in many different
+styles, it's worth having a mix of styles in the testsuite; for
+instance, some @value{GDBN} bugs involving the display of source lines would
+never manifest themselves if the programs used GNU coding style
+uniformly.
+
+@node Hints
+
+@chapter Hints
+
+Check the @file{README} file, it often has useful information that does not
+appear anywhere else in the directory.
+
+@menu
+* Getting Started:: Getting started working on @value{GDBN}
+* Debugging GDB:: Debugging @value{GDBN} with itself
+@end menu
+
+@node Getting Started,,, Hints
+
+@section Getting Started
+
+@value{GDBN} is a large and complicated program, and if you first starting to
+work on it, it can be hard to know where to start. Fortunately, if you
+know how to go about it, there are ways to figure out what is going on.
+
+This manual, the @value{GDBN} Internals manual, has information which applies
+generally to many parts of @value{GDBN}.
+
+Information about particular functions or data structures are located in
+comments with those functions or data structures. If you run across a
+function or a global variable which does not have a comment correctly
+explaining what is does, this can be thought of as a bug in @value{GDBN}; feel
+free to submit a bug report, with a suggested comment if you can figure
+out what the comment should say. If you find a comment which is
+actually wrong, be especially sure to report that.
+
+Comments explaining the function of macros defined in host, target, or
+native dependent files can be in several places. Sometimes they are
+repeated every place the macro is defined. Sometimes they are where the
+macro is used. Sometimes there is a header file which supplies a
+default definition of the macro, and the comment is there. This manual
+also documents all the available macros.
+@c (@pxref{Host Conditionals}, @pxref{Target
+@c Conditionals}, @pxref{Native Conditionals}, and @pxref{Obsolete
+@c Conditionals})
+
+Start with the header files. Once you have some idea of how @value{GDBN}'s internal
+symbol tables are stored (see @file{symtab.h}, @file{gdbtypes.h}), you
+will find it much easier to understand the code which uses and creates
+those symbol tables.
+
+You may wish to process the information you are getting somehow, to
+enhance your understanding of it. Summarize it, translate it to another
+language, add some (perhaps trivial or non-useful) feature to @value{GDBN}, use
+the code to predict what a test case would do and write the test case
+and verify your prediction, etc. If you are reading code and your eyes
+are starting to glaze over, this is a sign you need to use a more active
+approach.
+
+Once you have a part of @value{GDBN} to start with, you can find more
+specifically the part you are looking for by stepping through each
+function with the @code{next} command. Do not use @code{step} or you
+will quickly get distracted; when the function you are stepping through
+calls another function try only to get a big-picture understanding
+(perhaps using the comment at the beginning of the function being
+called) of what it does. This way you can identify which of the
+functions being called by the function you are stepping through is the
+one which you are interested in. You may need to examine the data
+structures generated at each stage, with reference to the comments in
+the header files explaining what the data structures are supposed to
+look like.
+
+Of course, this same technique can be used if you are just reading the
+code, rather than actually stepping through it. The same general
+principle applies---when the code you are looking at calls something
+else, just try to understand generally what the code being called does,
+rather than worrying about all its details.
+
+A good place to start when tracking down some particular area is with a
+command which invokes that feature. Suppose you want to know how
+single-stepping works. As a @value{GDBN} user, you know that the @code{step}
+command invokes single-stepping. The command is invoked via command
+tables (see @file{command.h}); by convention the function which actually
+performs the command is formed by taking the name of the command and
+adding @samp{_command}, or in the case of an @code{info} subcommand,
+@samp{_info}. For example, the @code{step} command invokes the
+@code{step_command} function and the @code{info display} command invokes
+@code{display_info}. When this convention is not followed, you might
+have to use @code{grep} or @kbd{M-x tags-search} in emacs, or run @value{GDBN} on
+itself and set a breakpoint in @code{execute_command}.
+
+If all of the above fail, it may be appropriate to ask for information
+on @code{bug-gdb}. But @emph{never} post a generic question like ``I was
+wondering if anyone could give me some tips about understanding
+@value{GDBN}''---if we had some magic secret we would put it in this manual.
+Suggestions for improving the manual are always welcome, of course.
+
+@node Debugging GDB,,,Hints
+
+@section Debugging @value{GDBN} with itself
+
+If @value{GDBN} is limping on your machine, this is the preferred way to get it
+fully functional. Be warned that in some ancient Unix systems, like
+Ultrix 4.2, a program can't be running in one process while it is being
+debugged in another. Rather than typing the command @code{@w{./gdb
+./gdb}}, which works on Suns and such, you can copy @file{gdb} to
+@file{gdb2} and then type @code{@w{./gdb ./gdb2}}.
+
+When you run @value{GDBN} in the @value{GDBN} source directory, it will read a
+@file{.gdbinit} file that sets up some simple things to make debugging
+gdb easier. The @code{info} command, when executed without a subcommand
+in a @value{GDBN} being debugged by gdb, will pop you back up to the top level
+gdb. See @file{.gdbinit} for details.
+
+If you use emacs, you will probably want to do a @code{make TAGS} after
+you configure your distribution; this will put the machine dependent
+routines for your local machine where they will be accessed first by
+@kbd{M-.}
+
+Also, make sure that you've either compiled @value{GDBN} with your local cc, or
+have run @code{fixincludes} if you are compiling with gcc.
+
+@section Submitting Patches
+
+Thanks for thinking of offering your changes back to the community of
+@value{GDBN} users. In general we like to get well designed enhancements.
+Thanks also for checking in advance about the best way to transfer the
+changes.
+
+The @value{GDBN} maintainers will only install ``cleanly designed'' patches.
+This manual summarizes what we believe to be clean design for @value{GDBN}.
+
+If the maintainers don't have time to put the patch in when it arrives,
+or if there is any question about a patch, it goes into a large queue
+with everyone else's patches and bug reports.
+
+The legal issue is that to incorporate substantial changes requires a
+copyright assignment from you and/or your employer, granting ownership
+of the changes to the Free Software Foundation. You can get the
+standard documents for doing this by sending mail to @code{gnu@@gnu.org}
+and asking for it. We recommend that people write in "All programs
+owned by the Free Software Foundation" as "NAME OF PROGRAM", so that
+changes in many programs (not just @value{GDBN}, but GAS, Emacs, GCC, etc) can be
+contributed with only one piece of legalese pushed through the
+bureacracy and filed with the FSF. We can't start merging changes until
+this paperwork is received by the FSF (their rules, which we follow
+since we maintain it for them).
+
+Technically, the easiest way to receive changes is to receive each
+feature as a small context diff or unidiff, suitable for "patch". Each
+message sent to me should include the changes to C code and header files
+for a single feature, plus ChangeLog entries for each directory where
+files were modified, and diffs for any changes needed to the manuals
+(gdb/doc/gdb.texinfo or gdb/doc/gdbint.texinfo). If there are a lot of
+changes for a single feature, they can be split down into multiple
+messages.
+
+In this way, if we read and like the feature, we can add it to the
+sources with a single patch command, do some testing, and check it in.
+If you leave out the ChangeLog, we have to write one. If you leave
+out the doc, we have to puzzle out what needs documenting. Etc.
+
+The reason to send each change in a separate message is that we will not
+install some of the changes. They'll be returned to you with questions
+or comments. If we're doing our job correctly, the message back to you
+will say what you have to fix in order to make the change acceptable.
+The reason to have separate messages for separate features is so that
+the acceptable changes can be installed while one or more changes are
+being reworked. If multiple features are sent in a single message, we
+tend to not put in the effort to sort out the acceptable changes from
+the unacceptable, so none of the features get installed until all are
+acceptable.
+
+If this sounds painful or authoritarian, well, it is. But we get a lot
+of bug reports and a lot of patches, and many of them don't get
+installed because we don't have the time to finish the job that the bug
+reporter or the contributor could have done. Patches that arrive
+complete, working, and well designed, tend to get installed on the day
+they arrive. The others go into a queue and get installed as time
+permits, which, since the maintainers have many demands to meet, may not
+be for quite some time.
+
+Please send patches directly to the @value{GDBN} maintainers at
+@code{gdb-patches@@sourceware.cygnus.com}.
+
+@section Obsolete Conditionals
+
+Fragments of old code in @value{GDBN} sometimes reference or set the following
+configuration macros. They should not be used by new code, and old uses
+should be removed as those parts of the debugger are otherwise touched.
+
+@table @code
+
+@item STACK_END_ADDR
+This macro used to define where the end of the stack appeared, for use
+in interpreting core file formats that don't record this address in the
+core file itself. This information is now configured in BFD, and @value{GDBN}
+gets the info portably from there. The values in @value{GDBN}'s configuration
+files should be moved into BFD configuration files (if needed there),
+and deleted from all of @value{GDBN}'s config files.
+
+Any @file{@var{foo}-xdep.c} file that references STACK_END_ADDR
+is so old that it has never been converted to use BFD. Now that's old!
+
+@item PYRAMID_CONTROL_FRAME_DEBUGGING
+pyr-xdep.c
+@item PYRAMID_CORE
+pyr-xdep.c
+@item PYRAMID_PTRACE
+pyr-xdep.c
+
+@item REG_STACK_SEGMENT
+exec.c
+
+@end table
+
+@c TeX can handle the contents at the start but makeinfo 3.12 can not
+@ifinfo
+@contents
+@end ifinfo
+@ifhtml
+@contents
+@end ifhtml
-@contents
@bye
projects / deliverable / binutils-gdb.git / blobdiff