/* S-record download support for GDB, the GNU debugger.
- Copyright 1995, 1996, 1997, 1999, 2000, 2001
- Free Software Foundation, Inc.
+ Copyright (C) 1995-2013 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "serial.h"
#include "srec.h"
+#include <sys/time.h>
#include <time.h>
-
-extern void report_transfer_performance (unsigned long, time_t, time_t);
+#include "gdb_assert.h"
+#include "gdb_string.h"
+#include "gdb_bfd.h"
extern int remote_debug;
char *srec;
int i;
int reclen;
- time_t start_time, end_time;
+ struct timeval start_time, end_time;
unsigned long data_count = 0;
+ struct cleanup *cleanup;
srec = (char *) alloca (maxrecsize + 1);
- abfd = bfd_openr (file, 0);
+ abfd = gdb_bfd_open (file, NULL, -1);
if (!abfd)
{
- printf_filtered ("Unable to open file %s\n", file);
+ printf_filtered (_("Unable to open file %s\n"), file);
return;
}
+ cleanup = make_cleanup_bfd_unref (abfd);
if (bfd_check_format (abfd, bfd_object) == 0)
{
- printf_filtered ("File is not an object file\n");
+ printf_filtered (_("File is not an object file\n"));
+ do_cleanups (cleanup);
return;
}
- start_time = time (NULL);
+ gettimeofday (&start_time, NULL);
/* Write a type 0 header record. no data for a type 0, and there
is no data, so len is 0. */
if (s->flags & SEC_LOAD)
{
int numbytes;
+
bfd_vma addr = bfd_get_section_vma (abfd, s) + load_offset;
- bfd_size_type size = bfd_get_section_size_before_reloc (s);
+ bfd_size_type size = bfd_get_section_size (s);
char *section_name = (char *) bfd_get_section_name (abfd, s);
/* Both GDB and BFD have mechanisms for printing addresses.
In the below, GDB's is used so that the address is
consistent with the rest of GDB. BFD's printf_vma() could
- have also been used. cagney 1999-09-01 */
- printf_filtered ("%s\t: 0x%s .. 0x%s ",
+ have also been used. cagney 1999-09-01 */
+ printf_filtered ("%s\t: %s .. %s ",
section_name,
- paddr (addr),
- paddr (addr + size));
+ paddress (target_gdbarch (), addr),
+ paddress (target_gdbarch (), addr + size));
gdb_flush (gdb_stdout);
data_count += size;
do
{
serial_write (desc, srec, reclen);
- if (ui_load_progress_hook)
- if (ui_load_progress_hook (section_name, (unsigned long) i))
- error ("Canceled the download");
+ if (deprecated_ui_load_progress_hook)
+ if (deprecated_ui_load_progress_hook (section_name,
+ (unsigned long) i))
+ error (_("Canceled the download"));
}
while (waitack != NULL && !waitack ());
putchar_unfiltered ('#');
gdb_flush (gdb_stdout);
}
- } /* Per-packet (or S-record) loop */
+ } /* Per-packet (or S-record) loop. */
- if (ui_load_progress_hook)
- if (ui_load_progress_hook (section_name, (unsigned long) i))
- error ("Canceled the download");
+ if (deprecated_ui_load_progress_hook)
+ if (deprecated_ui_load_progress_hook (section_name,
+ (unsigned long) i))
+ error (_("Canceled the download"));
putchar_unfiltered ('\n');
}
if (hashmark)
putchar_unfiltered ('\n');
- end_time = time (NULL);
+ gettimeofday (&end_time, NULL);
/* Write a terminator record. */
serial_flush_input (desc);
- report_transfer_performance (data_count, start_time, end_time);
+ print_transfer_performance (gdb_stdout, data_count, 0,
+ &start_time, &end_time);
+ do_cleanups (cleanup);
}
/*
- * make_srec -- make an srecord. This writes each line, one at a
+ * make_srec -- make an srecord. This writes each line, one at a
* time, each with it's own header and trailer line.
* An srecord looks like this:
*
*
* Where
* - length
- * is the number of bytes following upto the checksum. Note that
- * this is not the number of chars following, since it takes two
- * chars to represent a byte.
+ * is the number of bytes following upto the checksum. Note
+ * that this is not the number of chars following, since it
+ * takes two chars to represent a byte.
* - type
* is one of:
* 0) header record
const static char data_code_table[] = "123";
const static char term_code_table[] = "987";
const static char header_code_table[] = "000";
- const static char *formats[] =
- {"S%c%02X%04X",
- "S%c%02X%06X",
- "S%c%02X%08X"};
char const *code_table;
int addr_size;
int payload_size;
addr_size = 4;
else
internal_error (__FILE__, __LINE__,
- "make_srec: Bad address (0x%s), or bad flags (0x%x).",
- paddr (targ_addr), flags);
+ _("make_srec: Bad address (%s), or bad flags (0x%x)."),
+ paddress (target_gdbarch (), targ_addr), flags);
/* Now that we know the address size, we can figure out how much
data this record can hold. */
if (sect && abfd)
{
payload_size = (*maxrecsize - (1 + 1 + 2 + addr_size * 2 + 2)) / 2;
- payload_size = min (payload_size, sect->_raw_size - sectoff);
+ payload_size = min (payload_size, bfd_get_section_size (sect) - sectoff);
bfd_get_section_contents (abfd, sect, binbuf, sectoff, payload_size);
}
else
- payload_size = 0; /* Term or header packets have no payload */
+ payload_size = 0; /* Term or header packets have no payload. */
/* Output the header. */
-
- sprintf (srec, formats[addr_size - 2], code_table[addr_size - 2],
- addr_size + payload_size + 1, (int) targ_addr);
+ snprintf (srec, (*maxrecsize) + 1, "S%c%02X%0*X",
+ code_table[addr_size - 2],
+ addr_size + payload_size + 1,
+ addr_size * 2, (int) targ_addr);
/* Note that the checksum is calculated on the raw data, not the
hexified data. It includes the length, address and the data
checksum = 0;
checksum += (payload_size + addr_size + 1 /* Packet length */
- + (targ_addr & 0xff) /* Address... */
+ + (targ_addr & 0xff) /* Address... */
+ ((targ_addr >> 8) & 0xff)
+ ((targ_addr >> 16) & 0xff)
+ ((targ_addr >> 24) & 0xff));
+ /* NOTE: cagney/2003-08-10: The equation is old. Check that the
+ recent snprintf changes match that equation. */
+ gdb_assert (strlen (srec) == 1 + 1 + 2 + addr_size * 2);
p = srec + 1 + 1 + 2 + addr_size * 2;
/* Build the Srecord. */
projects / deliverable / binutils-gdb.git / blobdiff