/* Definitions for expressions stored in reversed prefix form, for GDB.
- Copyright 1986, 1989, 1992, 1994, 2000 Free Software Foundation, Inc.
+
+ Copyright (C) 1986-2015 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#if !defined (EXPRESSION_H)
#define EXPRESSION_H 1
-#include "symtab.h" /* Needed for "struct block" type. */
+#include "symtab.h" /* Needed for "struct block" type. */
+#include "doublest.h" /* Needed for DOUBLEST. */
/* Definitions for saved C expressions. */
enum exp_opcode
{
- /* Used when it's necessary to pass an opcode which will be ignored,
- or to catch uninitialized values. */
- OP_NULL,
-
-/* BINOP_... operate on two values computed by following subexpressions,
- replacing them by one result value. They take no immediate arguments. */
-
- BINOP_ADD, /* + */
- BINOP_SUB, /* - */
- BINOP_MUL, /* * */
- BINOP_DIV, /* / */
- BINOP_REM, /* % */
- BINOP_MOD, /* mod (Knuth 1.2.4) */
- BINOP_LSH, /* << */
- BINOP_RSH, /* >> */
- BINOP_LOGICAL_AND, /* && */
- BINOP_LOGICAL_OR, /* || */
- BINOP_BITWISE_AND, /* & */
- BINOP_BITWISE_IOR, /* | */
- BINOP_BITWISE_XOR, /* ^ */
- BINOP_EQUAL, /* == */
- BINOP_NOTEQUAL, /* != */
- BINOP_LESS, /* < */
- BINOP_GTR, /* > */
- BINOP_LEQ, /* <= */
- BINOP_GEQ, /* >= */
- BINOP_REPEAT, /* @ */
- BINOP_ASSIGN, /* = */
- BINOP_COMMA, /* , */
- BINOP_SUBSCRIPT, /* x[y] */
- BINOP_EXP, /* Exponentiation */
-
- /* C++. */
-
- BINOP_MIN, /* <? */
- BINOP_MAX, /* >? */
-
- /* STRUCTOP_MEMBER is used for pointer-to-member constructs.
- X . * Y translates into X STRUCTOP_MEMBER Y. */
- STRUCTOP_MEMBER,
-
- /* STRUCTOP_MPTR is used for pointer-to-member constructs
- when X is a pointer instead of an aggregate. */
- STRUCTOP_MPTR,
-
- /* end of C++. */
-
- /* For Modula-2 integer division DIV */
- BINOP_INTDIV,
-
- BINOP_ASSIGN_MODIFY, /* +=, -=, *=, and so on.
- The following exp_element is another opcode,
- a BINOP_, saying how to modify.
- Then comes another BINOP_ASSIGN_MODIFY,
- making three exp_elements in total. */
-
- /* Modula-2 standard (binary) procedures */
- BINOP_VAL,
- BINOP_INCL,
- BINOP_EXCL,
-
- /* Concatenate two operands, such as character strings or bitstrings.
- If the first operand is a integer expression, then it means concatenate
- the second operand with itself that many times. */
- BINOP_CONCAT,
-
- /* For Chill and Pascal. */
- BINOP_IN, /* Returns 1 iff ARG1 IN ARG2. */
-
- /* This is the "colon operator" used various places in Chill. */
- BINOP_RANGE,
-
- /* This must be the highest BINOP_ value, for expprint.c. */
- BINOP_END,
-
- /* Operates on three values computed by following subexpressions. */
- TERNOP_COND, /* ?: */
-
- /* A sub-string/sub-array. Chill syntax: OP1(OP2:OP3).
- Return elements OP2 through OP3 of OP1. */
- TERNOP_SLICE,
-
- /* A sub-string/sub-array. Chill syntax: OP1(OP2 UP OP3).
- Return OP3 elements of OP1, starting with element OP2. */
- TERNOP_SLICE_COUNT,
-
- /* Multidimensional subscript operator, such as Modula-2 x[a,b,...].
- The dimensionality is encoded in the operator, like the number of
- function arguments in OP_FUNCALL, I.E. <OP><dimension><OP>.
- The value of the first following subexpression is subscripted
- by each of the next following subexpressions, one per dimension. */
- MULTI_SUBSCRIPT,
-
- /* The OP_... series take immediate following arguments.
- After the arguments come another OP_... (the same one)
- so that the grouping can be recognized from the end. */
-
- /* OP_LONG is followed by a type pointer in the next exp_element
- and the long constant value in the following exp_element.
- Then comes another OP_LONG.
- Thus, the operation occupies four exp_elements. */
- OP_LONG,
-
- /* OP_DOUBLE is similar but takes a DOUBLEST constant instead of a long. */
- OP_DOUBLE,
-
- /* OP_VAR_VALUE takes one struct block * in the following element,
- and one struct symbol * in the following exp_element, followed by
- another OP_VAR_VALUE, making four exp_elements. If the block is
- non-NULL, evaluate the symbol relative to the innermost frame
- executing in that block; if the block is NULL use the selected frame. */
- OP_VAR_VALUE,
-
- /* OP_LAST is followed by an integer in the next exp_element.
- The integer is zero for the last value printed,
- or it is the absolute number of a history element.
- With another OP_LAST at the end, this makes three exp_elements. */
- OP_LAST,
-
- /* OP_REGISTER is followed by an integer in the next exp_element.
- This is the number of a register to fetch (as an int).
- With another OP_REGISTER at the end, this makes three exp_elements. */
- OP_REGISTER,
-
- /* OP_INTERNALVAR is followed by an internalvar ptr in the next exp_element.
- With another OP_INTERNALVAR at the end, this makes three exp_elements. */
- OP_INTERNALVAR,
-
- /* OP_FUNCALL is followed by an integer in the next exp_element.
- The integer is the number of args to the function call.
- That many plus one values from following subexpressions
- are used, the first one being the function.
- The integer is followed by a repeat of OP_FUNCALL,
- making three exp_elements. */
- OP_FUNCALL,
-
- /* This is EXACTLY like OP_FUNCALL but is semantically different.
- In F77, array subscript expressions, substring expressions
- and function calls are all exactly the same syntactically. They may
- only be dismabiguated at runtime. Thus this operator, which
- indicates that we have found something of the form <name> ( <stuff> ) */
- OP_F77_UNDETERMINED_ARGLIST,
-
- /* The following OP is a special one, it introduces a F77 complex
- literal. It is followed by exactly two args that are doubles. */
- OP_COMPLEX,
-
- /* OP_STRING represents a string constant.
- Its format is the same as that of a STRUCTOP, but the string
- data is just made into a string constant when the operation
- is executed. */
- OP_STRING,
-
- /* OP_BITSTRING represents a packed bitstring constant.
- Its format is the same as that of a STRUCTOP, but the bitstring
- data is just made into a bitstring constant when the operation
- is executed. */
- OP_BITSTRING,
-
- /* OP_ARRAY creates an array constant out of the following subexpressions.
- It is followed by two exp_elements, the first containing an integer
- that is the lower bound of the array and the second containing another
- integer that is the upper bound of the array. The second integer is
- followed by a repeat of OP_ARRAY, making four exp_elements total.
- The bounds are used to compute the number of following subexpressions
- to consume, as well as setting the bounds in the created array constant.
- The type of the elements is taken from the type of the first subexp,
- and they must all match. */
- OP_ARRAY,
-
- /* UNOP_CAST is followed by a type pointer in the next exp_element.
- With another UNOP_CAST at the end, this makes three exp_elements.
- It casts the value of the following subexpression. */
- UNOP_CAST,
-
- /* UNOP_MEMVAL is followed by a type pointer in the next exp_element
- With another UNOP_MEMVAL at the end, this makes three exp_elements.
- It casts the contents of the word addressed by the value of the
- following subexpression. */
- UNOP_MEMVAL,
-
- /* UNOP_... operate on one value from a following subexpression
- and replace it with a result. They take no immediate arguments. */
-
- UNOP_NEG, /* Unary - */
- UNOP_LOGICAL_NOT, /* Unary ! */
- UNOP_COMPLEMENT, /* Unary ~ */
- UNOP_IND, /* Unary * */
- UNOP_ADDR, /* Unary & */
- UNOP_PREINCREMENT, /* ++ before an expression */
- UNOP_POSTINCREMENT, /* ++ after an expression */
- UNOP_PREDECREMENT, /* -- before an expression */
- UNOP_POSTDECREMENT, /* -- after an expression */
- UNOP_SIZEOF, /* Unary sizeof (followed by expression) */
-
- UNOP_PLUS, /* Unary plus */
-
- UNOP_CAP, /* Modula-2 standard (unary) procedures */
- UNOP_CHR,
- UNOP_ORD,
- UNOP_ABS,
- UNOP_FLOAT,
- UNOP_HIGH,
- UNOP_MAX,
- UNOP_MIN,
- UNOP_ODD,
- UNOP_TRUNC,
-
- /* Chill builtin functions. */
- UNOP_LOWER, UNOP_UPPER, UNOP_LENGTH, UNOP_CARD, UNOP_CHMAX, UNOP_CHMIN,
-
- OP_BOOL, /* Modula-2 builtin BOOLEAN type */
- OP_M2_STRING, /* Modula-2 string constants */
-
- /* STRUCTOP_... operate on a value from a following subexpression
- by extracting a structure component specified by a string
- that appears in the following exp_elements (as many as needed).
- STRUCTOP_STRUCT is used for "." and STRUCTOP_PTR for "->".
- They differ only in the error message given in case the value is
- not suitable or the structure component specified is not found.
-
- The length of the string follows the opcode, followed by
- BYTES_TO_EXP_ELEM(length) elements containing the data of the
- string, followed by the length again and the opcode again. */
-
- STRUCTOP_STRUCT,
- STRUCTOP_PTR,
-
- /* C++ */
- /* OP_THIS is just a placeholder for the class instance variable.
- It just comes in a tight (OP_THIS, OP_THIS) pair. */
- OP_THIS,
-
- /* OP_SCOPE surrounds a type name and a field name. The type
- name is encoded as one element, but the field name stays as
- a string, which, of course, is variable length. */
- OP_SCOPE,
-
- /* Used to represent named structure field values in brace initializers
- (or tuples as they are called in Chill).
- The gcc C syntax is NAME:VALUE or .NAME=VALUE, the Chill syntax is
- .NAME:VALUE. Multiple labels (as in the Chill syntax
- .NAME1,.NAME2:VALUE) is represented as if it were
- .NAME1:(.NAME2:VALUE) (though that is not valid Chill syntax).
-
- The NAME is represented as for STRUCTOP_STRUCT; VALUE follows. */
- OP_LABELED,
-
- /* OP_TYPE is for parsing types, and used with the "ptype" command
- so we can look up types that are qualified by scope, either with
- the GDB "::" operator, or the Modula-2 '.' operator. */
- OP_TYPE,
-
- /* An un-looked-up identifier. */
- OP_NAME,
-
- /* An unparsed expression. Used for Scheme (for now at least) */
- OP_EXPRSTRING
+#define OP(name) name ,
+
+#include "std-operator.def"
+
+ /* First extension operator. Individual language modules define extra
+ operators in *.def include files below with numbers higher than
+ OP_EXTENDED0. */
+ OP (OP_EXTENDED0)
+
+/* Language specific operators. */
+#include "ada-operator.def"
+
+#undef OP
+
+ /* Existing only to swallow the last comma (',') from last .inc file. */
+ OP_UNUSED_LAST
};
union exp_element
struct symbol *symbol;
LONGEST longconst;
DOUBLEST doubleconst;
+ gdb_byte decfloatconst[16];
/* Really sizeof (union exp_element) characters (or less for the last
element of a string). */
char string;
struct type *type;
struct internalvar *internalvar;
- struct block *block;
+ const struct block *block;
+ struct objfile *objfile;
};
struct expression
{
- const struct language_defn *language_defn; /* language it was entered in */
+ const struct language_defn *language_defn; /* language it was
+ entered in. */
+ struct gdbarch *gdbarch; /* architecture it was parsed in. */
int nelts;
union exp_element elts[1];
};
/* Macros for converting between number of expression elements and bytes
- to store that many expression elements. */
+ to store that many expression elements. */
#define EXP_ELEM_TO_BYTES(elements) \
((elements) * sizeof (union exp_element))
/* From parse.c */
-extern struct expression *parse_expression (char *);
+extern struct expression *parse_expression (const char *);
+
+extern struct expression *parse_expression_with_language (const char *string,
+ enum language lang);
+
+extern struct type *parse_expression_for_completion (const char *, char **,
+ enum type_code *);
-extern struct expression *parse_exp_1 (char **, struct block *, int);
+extern struct expression *parse_exp_1 (const char **, CORE_ADDR pc,
+ const struct block *, int);
+
+/* For use by parsers; set if we want to parse an expression and
+ attempt completion. */
+extern int parse_completion;
/* The innermost context required by the stack and register variables
we've encountered so far. To use this, set it to NULL, then call
parse_<whatever>, then look at it. */
-extern struct block *innermost_block;
+extern const struct block *innermost_block;
/* From eval.c */
type (inaccuracy: anything that is
listed as being in a register in
the function in which it was
- declared will be lval_register). */
+ declared will be lval_register).
+ Ideally this would not even read
+ target memory, but currently it
+ does in many situations. */
};
extern struct value *evaluate_subexp_standard
extern void print_expression (struct expression *, struct ui_file *);
+extern char *op_name (struct expression *exp, enum exp_opcode opcode);
+
extern char *op_string (enum exp_opcode);
-extern void dump_prefix_expression (struct expression *,
- struct ui_file *,
- char *);
-extern void dump_postfix_expression (struct expression *,
- struct ui_file *,
- char *);
+extern void dump_raw_expression (struct expression *,
+ struct ui_file *, char *);
+extern void dump_prefix_expression (struct expression *, struct ui_file *);
#endif /* !defined (EXPRESSION_H) */
projects / deliverable / binutils-gdb.git / blobdiff