struct symtab_and_line;
struct frame_unwind;
+struct frame_base;
+struct block;
-/* The traditional frame unwinder. */
-extern const struct frame_unwind *trad_frame_unwind;
+/* A legacy unwinder to prop up architectures using the old style
+ saved regs array. */
+extern const struct frame_unwind *legacy_saved_regs_unwind;
/* The frame object. */
this frame. */
extern CORE_ADDR get_frame_pc (struct frame_info *);
+/* Following on from the `resume' address. Return the entry point
+ address of the function containing that resume address, or zero if
+ that function isn't known. */
+extern CORE_ADDR frame_func_unwind (struct frame_info *fi);
+extern CORE_ADDR get_frame_func (struct frame_info *fi);
+
/* Closely related to the resume address, various symbol table
attributes that are determined by the PC. Note that for a normal
frame, the PC refers to the resume address after the return, and
extern void find_frame_sal (struct frame_info *frame,
struct symtab_and_line *sal);
-/* Return the frame address from FI. Except in the machine-dependent
- *FRAME* macros, a frame address has no defined meaning other than
- as a magic cookie which identifies a frame over calls to the
- inferior (um, SEE NOTE BELOW). The only known exception is
- inferior.h (DEPRECATED_PC_IN_CALL_DUMMY) [ON_STACK]; see comments
- there. You cannot assume that a frame address contains enough
- information to reconstruct the frame; if you want more than just to
- identify the frame (e.g. be able to fetch variables relative to
- that frame), then save the whole struct frame_info (and the next
- struct frame_info, since the latter is used for fetching variables
- on some machines) (um, again SEE NOTE BELOW).
-
- NOTE: cagney/2002-11-18: Actually, the frame address isn't
- sufficient for identifying a frame, and the counter examples are
- wrong!
-
- Code that needs to (re)identify a frame must use get_frame_id() and
- frame_find_by_id() (and in the future, a frame_compare() function
- instead of INNER_THAN()). Two reasons: an architecture (e.g.,
- ia64) can have more than one frame address (due to multiple stack
- pointers) (frame ID is going to be expanded to accomodate this);
- successive frameless function calls can only be differientated by
- comparing both the frame's base and the frame's enclosing function
- (frame_find_by_id() is going to be modified to perform this test).
-
- The generic dummy frame version of DEPRECATED_PC_IN_CALL_DUMMY() is
- able to identify a dummy frame using only the PC value. So the
- frame address is not needed. In fact, most
- DEPRECATED_PC_IN_CALL_DUMMY() calls now pass zero as the frame/sp
- values as the caller knows that those values won't be used. Once
- all architectures are using generic dummy frames,
- DEPRECATED_PC_IN_CALL_DUMMY() can drop the sp/frame parameters.
- When it comes to finding a dummy frame, the next frame's frame ID
- (with out duing an unwind) can be used (ok, could if it wasn't for
- the need to change the way the PPC defined frame base in a strange
- way).
-
- Modern architectures should be using something like dwarf2's
- location expression to describe where a variable lives. Such
- expressions specify their own debug info centric frame address.
- Consequently, a generic frame address is pretty meaningless. */
+/* Return the frame base (what ever that is) (DEPRECATED).
+
+ Old code was trying to use this single method for two conflicting
+ purposes. Such code needs to be updated to use either of:
+
+ get_frame_id: A low level frame unique identifier, that consists of
+ both a stack and a function address, that can be used to uniquely
+ identify a frame. This value is determined by the frame's
+ low-level unwinder, the stack part [typically] being the
+ top-of-stack of the previous frame, and the function part being the
+ function's start address. Since the correct identification of a
+ frameless function requires both the a stack and function address,
+ the old get_frame_base method was not sufficient.
+
+ get_frame_base_address: get_frame_locals_address:
+ get_frame_args_address: A set of high-level debug-info dependant
+ addresses that fall within the frame. These addresses almost
+ certainly will not match the stack address part of a frame ID (as
+ returned by get_frame_base). */
extern CORE_ADDR get_frame_base (struct frame_info *);
FI is NULL, return the null_frame_id. */
extern struct frame_id get_frame_id (struct frame_info *fi);
+/* Assuming that a frame is `normal', return its base-address, or 0 if
+ the information isn't available. NOTE: This address is really only
+ meaningful to the frame's high-level debug info. */
+extern CORE_ADDR get_frame_base_address (struct frame_info *);
+
+/* Assuming that a frame is `normal', return the base-address of the
+ local variables, or 0 if the information isn't available. NOTE:
+ This address is really only meaningful to the frame's high-level
+ debug info. Typically, the argument and locals share a single
+ base-address. */
+extern CORE_ADDR get_frame_locals_address (struct frame_info *);
+
+/* Assuming that a frame is `normal', return the base-address of the
+ parameter list, or 0 if that information isn't available. NOTE:
+ This address is really only meaningful to the frame's high-level
+ debug info. Typically, the argument and locals share a single
+ base-address. */
+extern CORE_ADDR get_frame_args_address (struct frame_info *);
+
/* The frame's level: 0 for innermost, 1 for its caller, ...; or -1
for an invalid frame). */
extern int frame_relative_level (struct frame_info *fi);
enum frame_type
{
+ /* The frame's type hasn't yet been defined. This is a catch-all
+ for legacy code that uses really strange technicques, such as
+ deprecated_set_frame_type, to set the frame's type. New code
+ should not use this value. */
+ UNKNOWN_FRAME,
/* A true stack frame, created by the target program during normal
execution. */
NORMAL_FRAME,
PC_IN_SIGTRAMP() indicates a SIGTRAMP_FRAME and
DEPRECATED_PC_IN_CALL_DUMMY() indicates a DUMMY_FRAME. I suspect
the real problem here is that get_prev_frame() only sets
- initialized after INIT_EXTRA_FRAME_INFO as been called.
+ initialized after DEPRECATED_INIT_EXTRA_FRAME_INFO as been called.
Consequently, some targets found that the frame's type was wrong
and tried to fix it. The correct fix is to modify get_prev_frame()
so that it initializes the frame's type before calling any other
extern CORE_ADDR frame_pc_unwind (struct frame_info *frame);
-/* Unwind the frame ID. Return an ID that uniquely identifies the
- caller's frame. */
-extern struct frame_id frame_id_unwind (struct frame_info *frame);
-
/* Discard the specified frame. Restoring the registers to the state
of the caller. */
extern void frame_pop (struct frame_info *frame);
-/* Describe the saved registers of a frame. */
-
-#if defined (EXTRA_FRAME_INFO) || defined (FRAME_FIND_SAVED_REGS)
-/* XXXX - deprecated */
-struct frame_saved_regs
- {
- /* For each register R (except the SP), regs[R] is the address at
- which it was saved on entry to the frame, or zero if it was not
- saved on entry to this frame. This includes special registers
- such as pc and fp saved in special ways in the stack frame.
-
- regs[SP_REGNUM] is different. It holds the actual SP, not the
- address at which it was saved. */
-
- CORE_ADDR regs[NUM_REGS];
- };
-#endif
-
/* We keep a cache of stack frames, each of which is a "struct
frame_info". The innermost one gets allocated (in
wait_for_inferior) each time the inferior stops; current_frame
int level;
/* The frame's type. */
+ /* FIXME: cagney/2003-04-02: Should instead be returning
+ ->unwind->type. Unfortunatly, legacy code is still explicitly
+ setting the type using the method deprecated_set_frame_type.
+ Eliminate that method and this field can be eliminated. */
enum frame_type type;
/* For each register, address of where it was saved on entry to
special, the address here is the sp for the previous frame, not
the address where the sp was saved. */
/* Allocated by frame_saved_regs_zalloc () which is called /
- initialized by FRAME_INIT_SAVED_REGS(). */
+ initialized by DEPRECATED_FRAME_INIT_SAVED_REGS(). */
CORE_ADDR *saved_regs; /*NUM_REGS + NUM_PSEUDO_REGS*/
-#ifdef EXTRA_FRAME_INFO
- /* XXXX - deprecated */
- /* Anything extra for this structure that may have been defined
- in the machine dependent files. */
- EXTRA_FRAME_INFO
-#endif
-
/* Anything extra for this structure that may have been defined
in the machine dependent files. */
/* Allocated by frame_extra_info_zalloc () which is called /
- initialized by INIT_EXTRA_FRAME_INFO */
+ initialized by DEPRECATED_INIT_EXTRA_FRAME_INFO */
struct frame_extra_info *extra_info;
/* If dwarf2 unwind frame informations is used, this structure holds all
related unwind data. */
struct context *context;
- /* Unwind cache shared between the unwind functions - they had
- better all agree as to the contents. */
- void *unwind_cache;
-
- /* The frame's unwinder. */
+ /* The frame's low-level unwinder and corresponding cache. The
+ low-level unwinder is responsible for unwinding register values
+ for the previous frame. The low-level unwind methods are
+ selected based on the presence, or otherwize, of register
+ unwind information such as CFI. */
+ void *prologue_cache;
const struct frame_unwind *unwind;
/* Cached copy of the previous frame's resume address. */
int pc_unwind_cache_p;
CORE_ADDR pc_unwind_cache;
- /* Cached copy of the previous frame's ID. */
- int id_unwind_cache_p;
- struct frame_id id_unwind_cache;
+ /* Cached copy of the previous frame's function address. */
+ struct
+ {
+ CORE_ADDR addr;
+ int p;
+ } prev_func;
+
+ /* This frame's ID. Note that the frame's ID, base and PC contain
+ redundant information. */
+ int id_p;
+ struct frame_id id;
+
+ /* The frame's high-level base methods, and corresponding cache.
+ The high level base methods are selected based on the frame's
+ debug info. */
+ const struct frame_base *base;
+ void *base_cache;
/* Pointers to the next (down, inner, younger) and previous (up,
outer, older) frame_info's in the frame cache. */
extern void *frame_obstack_zalloc (unsigned long size);
#define FRAME_OBSTACK_ZALLOC(TYPE) ((TYPE *) frame_obstack_zalloc (sizeof (TYPE)))
-/* If FRAME_CHAIN_VALID returns zero it means that the given frame
- is the outermost one and has no caller. */
+/* If legacy_frame_chain_valid() returns zero it means that the given
+ frame is the outermost one and has no caller.
-extern int frame_chain_valid (CORE_ADDR, struct frame_info *);
+ This method has been superseeded by the per-architecture
+ frame_unwind_pc() (returns 0 to indicate an invalid return address)
+ and per-frame this_id() (returns a NULL frame ID to indicate an
+ invalid frame). */
+extern int legacy_frame_chain_valid (CORE_ADDR, struct frame_info *);
extern void generic_save_dummy_frame_tos (CORE_ADDR sp);
-
-#ifdef FRAME_FIND_SAVED_REGS
-/* XXX - deprecated */
-#define FRAME_INIT_SAVED_REGS(FI) deprecated_get_frame_saved_regs (FI, NULL)
-extern void deprecated_get_frame_saved_regs (struct frame_info *,
- struct frame_saved_regs *);
-#endif
-
extern struct block *get_frame_block (struct frame_info *,
CORE_ADDR *addr_in_block);
extern CORE_ADDR get_pc_function_start (CORE_ADDR);
-extern struct block *block_for_pc (CORE_ADDR);
-
-extern struct block *block_for_pc_sect (CORE_ADDR, asection *);
-
extern int frameless_look_for_prologue (struct frame_info *);
extern void print_frame_args (struct symbol *, struct frame_info *,
/* NOTE: cagney/2002-06-26: Targets should no longer use this
function. Instead, the contents of a dummy frames registers can be
obtained by applying: frame_register_unwind to the dummy frame; or
- get_saved_register to the next outer frame. */
+ frame_register_unwind() to the next outer frame. */
extern char *deprecated_generic_find_dummy_frame (CORE_ADDR pc, CORE_ADDR fp);
-extern void generic_fix_call_dummy (char *dummy, CORE_ADDR pc, CORE_ADDR fun,
- int nargs, struct value **args,
- struct type *type, int gcc_p);
+void generic_unwind_get_saved_register (char *raw_buffer,
+ int *optimizedp,
+ CORE_ADDR *addrp,
+ struct frame_info *frame,
+ int regnum,
+ enum lval_type *lvalp);
/* The function generic_get_saved_register() has been made obsolete.
- GET_SAVED_REGISTER now defaults to the recursive equivalent -
- generic_unwind_get_saved_register() - so there is no need to even
- set GET_SAVED_REGISTER. Architectures that need to override the
- register unwind mechanism should modify frame->unwind(). */
+ DEPRECATED_GET_SAVED_REGISTER now defaults to the recursive
+ equivalent - generic_unwind_get_saved_register() - so there is no
+ need to even set DEPRECATED_GET_SAVED_REGISTER. Architectures that
+ need to override the register unwind mechanism should modify
+ frame->unwind(). */
extern void deprecated_generic_get_saved_register (char *, int *, CORE_ADDR *,
struct frame_info *, int,
enum lval_type *);
extern void generic_save_call_dummy_addr (CORE_ADDR lo, CORE_ADDR hi);
-extern void get_saved_register (char *raw_buffer, int *optimized,
- CORE_ADDR * addrp,
- struct frame_info *frame,
- int regnum, enum lval_type *lval);
-
/* FIXME: cagney/2003-02-02: Should be deprecated or replaced with a
function called frame_read_register_p(). This slightly weird (and
older) variant of frame_read_register() returns zero (indicating
extern void deprecated_set_frame_context (struct frame_info *fi,
struct context *context);
+/* Return non-zero if the architecture is relying on legacy frame
+ code. */
+extern int legacy_frame_p (struct gdbarch *gdbarch);
+
#endif /* !defined (FRAME_H) */
projects / deliverable / binutils-gdb.git / blobdiff