#!/bin/sh -u
# Architecture commands for GDB, the GNU debugger.
-# Copyright 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+#
+# Copyright 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software
+# Foundation, Inc.
+#
#
# This file is part of GDB.
#
M ) staticdefault="0" ;;
* ) test "${staticdefault}" || staticdefault=0 ;;
esac
- # NOT YET: Breaks BELIEVE_PCC_PROMOTION and confuses non-
- # multi-arch defaults.
- # test "${predefault}" || predefault=0
# come up with a format, use a few guesses for variables
case ":${class}:${fmt}:${print}:" in
F | V | M )
case "${invalid_p}" in
"" )
- if test -n "${predefault}" -a "${predefault}" != "0"
+ if test -n "${predefault}"
then
#invalid_p="gdbarch->${function} == ${predefault}"
predicate="gdbarch->${function} != ${predefault}"
- else
- # filled in later
- predicate=""
+ elif class_is_variable_p
+ then
+ predicate="gdbarch->${function} != 0"
+ elif class_is_function_p
+ then
+ predicate="gdbarch->${function} != NULL"
fi
;;
* )
# You cannot specify both a zero INVALID_P and a POSTDEFAULT.
- # Variable declarations can refer to ``gdbarch'' which will
- # contain the current architecture. Care should be taken.
+ # Variable declarations can refer to ``current_gdbarch'' which
+ # will contain the current architecture. Care should be
+ # taken.
invalid_p ) : ;;
# serious shakedown.
f:2:TARGET_VIRTUAL_FRAME_POINTER:void:virtual_frame_pointer:CORE_ADDR pc, int *frame_regnum, LONGEST *frame_offset:pc, frame_regnum, frame_offset::0:legacy_virtual_frame_pointer::0
#
-M:::void:pseudo_register_read:struct regcache *regcache, int cookednum, void *buf:regcache, cookednum, buf:
-M:::void:pseudo_register_write:struct regcache *regcache, int cookednum, const void *buf:regcache, cookednum, buf:
+M:::void:pseudo_register_read:struct regcache *regcache, int cookednum, void *buf:regcache, cookednum, buf
+M:::void:pseudo_register_write:struct regcache *regcache, int cookednum, const void *buf:regcache, cookednum, buf
#
v:2:NUM_REGS:int:num_regs::::0:-1
# This macro gives the number of pseudo-registers that live in the
v:2:PC_REGNUM:int:pc_regnum::::-1:-1::0
v:2:PS_REGNUM:int:ps_regnum::::-1:-1::0
v:2:FP0_REGNUM:int:fp0_regnum::::0:-1::0
-v:2:NPC_REGNUM:int:npc_regnum::::0:-1::0
# Convert stab register number (from \`r\' declaration) to a gdb REGNUM.
f:2:STAB_REG_TO_REGNUM:int:stab_reg_to_regnum:int stab_regnr:stab_regnr:::no_op_reg_to_regnum::0
# Provide a default mapping from a ecoff register number to a gdb REGNUM.
# Provide a default mapping from a DWARF register number to a gdb REGNUM.
f:2:DWARF_REG_TO_REGNUM:int:dwarf_reg_to_regnum:int dwarf_regnr:dwarf_regnr:::no_op_reg_to_regnum::0
# Convert from an sdb register number to an internal gdb register number.
-# This should be defined in tm.h, if REGISTER_NAMES is not set up
-# to map one to one onto the sdb register numbers.
f:2:SDB_REG_TO_REGNUM:int:sdb_reg_to_regnum:int sdb_regnr:sdb_regnr:::no_op_reg_to_regnum::0
f:2:DWARF2_REG_TO_REGNUM:int:dwarf2_reg_to_regnum:int dwarf2_regnr:dwarf2_regnr:::no_op_reg_to_regnum::0
-f:2:REGISTER_NAME:const char *:register_name:int regnr:regnr:::legacy_register_name::0
+f::REGISTER_NAME:const char *:register_name:int regnr:regnr
-# REGISTER_TYPE is a direct replacement for REGISTER_VIRTUAL_TYPE.
-M:2:REGISTER_TYPE:struct type *:register_type:int reg_nr:reg_nr::0:
-# REGISTER_TYPE is a direct replacement for REGISTER_VIRTUAL_TYPE.
-F:2:REGISTER_VIRTUAL_TYPE:struct type *:deprecated_register_virtual_type:int reg_nr:reg_nr::0:0
+# REGISTER_TYPE is a direct replacement for DEPRECATED_REGISTER_VIRTUAL_TYPE.
+M:2:REGISTER_TYPE:struct type *:register_type:int reg_nr:reg_nr
+# REGISTER_TYPE is a direct replacement for DEPRECATED_REGISTER_VIRTUAL_TYPE.
+F:2:DEPRECATED_REGISTER_VIRTUAL_TYPE:struct type *:deprecated_register_virtual_type:int reg_nr:reg_nr
# DEPRECATED_REGISTER_BYTES can be deleted. The value is computed
# from REGISTER_TYPE.
v::DEPRECATED_REGISTER_BYTES:int:deprecated_register_bytes
# consequence, even when the predicate is false, the corresponding
# function works. This simplifies the migration process - old code,
# calling DEPRECATED_REGISTER_BYTE, doesn't need to be modified.
-F::REGISTER_BYTE:int:deprecated_register_byte:int reg_nr:reg_nr::generic_register_byte:generic_register_byte
+F::DEPRECATED_REGISTER_BYTE:int:deprecated_register_byte:int reg_nr:reg_nr::generic_register_byte:generic_register_byte
# If all registers have identical raw and virtual sizes and those
# sizes agree with the value computed from REGISTER_TYPE,
# DEPRECATED_REGISTER_RAW_SIZE can be deleted. See: maint print
# registers.
-f:2:REGISTER_RAW_SIZE:int:deprecated_register_raw_size:int reg_nr:reg_nr::generic_register_size:generic_register_size::0
+F:2:DEPRECATED_REGISTER_RAW_SIZE:int:deprecated_register_raw_size:int reg_nr:reg_nr::generic_register_size:generic_register_size
# If all registers have identical raw and virtual sizes and those
# sizes agree with the value computed from REGISTER_TYPE,
# DEPRECATED_REGISTER_VIRTUAL_SIZE can be deleted. See: maint print
# registers.
-f:2:REGISTER_VIRTUAL_SIZE:int:deprecated_register_virtual_size:int reg_nr:reg_nr::generic_register_size:generic_register_size::0
+F:2:DEPRECATED_REGISTER_VIRTUAL_SIZE:int:deprecated_register_virtual_size:int reg_nr:reg_nr::generic_register_size:generic_register_size
# DEPRECATED_MAX_REGISTER_RAW_SIZE can be deleted. It has been
# replaced by the constant MAX_REGISTER_SIZE.
V:2:DEPRECATED_MAX_REGISTER_RAW_SIZE:int:deprecated_max_register_raw_size
V:2:DEPRECATED_MAX_REGISTER_VIRTUAL_SIZE:int:deprecated_max_register_virtual_size
# See gdbint.texinfo, and PUSH_DUMMY_CALL.
-M::UNWIND_DUMMY_ID:struct frame_id:unwind_dummy_id:struct frame_info *info:info::0:0
+M::UNWIND_DUMMY_ID:struct frame_id:unwind_dummy_id:struct frame_info *info:info
# Implement UNWIND_DUMMY_ID and PUSH_DUMMY_CALL, then delete
# SAVE_DUMMY_FRAME_TOS.
-F:2:SAVE_DUMMY_FRAME_TOS:void:save_dummy_frame_tos:CORE_ADDR sp:sp::0:0
+F:2:DEPRECATED_SAVE_DUMMY_FRAME_TOS:void:deprecated_save_dummy_frame_tos:CORE_ADDR sp:sp
# Implement UNWIND_DUMMY_ID and PUSH_DUMMY_CALL, then delete
# DEPRECATED_FP_REGNUM.
v:2:DEPRECATED_FP_REGNUM:int:deprecated_fp_regnum::::-1:-1::0
v::DEPRECATED_USE_GENERIC_DUMMY_FRAMES:int:deprecated_use_generic_dummy_frames:::::1::0
# Implement PUSH_RETURN_ADDRESS, and then merge in
# DEPRECATED_PUSH_RETURN_ADDRESS.
-F:2:DEPRECATED_PUSH_RETURN_ADDRESS:CORE_ADDR:deprecated_push_return_address:CORE_ADDR pc, CORE_ADDR sp:pc, sp:::0
+F:2:DEPRECATED_PUSH_RETURN_ADDRESS:CORE_ADDR:deprecated_push_return_address:CORE_ADDR pc, CORE_ADDR sp:pc, sp
# Implement PUSH_DUMMY_CALL, then merge in DEPRECATED_DUMMY_WRITE_SP.
F:2:DEPRECATED_DUMMY_WRITE_SP:void:deprecated_dummy_write_sp:CORE_ADDR val:val
# DEPRECATED_REGISTER_SIZE can be deleted.
v::DEPRECATED_REGISTER_SIZE:int:deprecated_register_size
v::CALL_DUMMY_LOCATION:int:call_dummy_location:::::AT_ENTRY_POINT::0
-f::CALL_DUMMY_ADDRESS:CORE_ADDR:call_dummy_address:void::::entry_point_address::0
+F::DEPRECATED_CALL_DUMMY_ADDRESS:CORE_ADDR:deprecated_call_dummy_address:void
# DEPRECATED_CALL_DUMMY_START_OFFSET can be deleted.
v::DEPRECATED_CALL_DUMMY_START_OFFSET:CORE_ADDR:deprecated_call_dummy_start_offset
# DEPRECATED_CALL_DUMMY_BREAKPOINT_OFFSET can be deleted.
# Implement PUSH_DUMMY_CALL, then delete DEPRECATED_SIZEOF_CALL_DUMMY_WORDS.
v::DEPRECATED_SIZEOF_CALL_DUMMY_WORDS:int:deprecated_sizeof_call_dummy_words::::0:legacy_sizeof_call_dummy_words::0
# Implement PUSH_DUMMY_CALL, then delete DEPRECATED_CALL_DUMMY_STACK_ADJUST.
-V:2:DEPRECATED_CALL_DUMMY_STACK_ADJUST:int:deprecated_call_dummy_stack_adjust::::0
+V:2:DEPRECATED_CALL_DUMMY_STACK_ADJUST:int:deprecated_call_dummy_stack_adjust
# DEPRECATED_FIX_CALL_DUMMY can be deleted. For the SPARC, implement
# PUSH_DUMMY_CODE and set CALL_DUMMY_LOCATION to ON_STACK.
F::DEPRECATED_FIX_CALL_DUMMY:void:deprecated_fix_call_dummy:char *dummy, CORE_ADDR pc, CORE_ADDR fun, int nargs, struct value **args, struct type *type, int gcc_p:dummy, pc, fun, nargs, args, type, gcc_p
# This is a replacement for DEPRECATED_FIX_CALL_DUMMY et.al.
-M::PUSH_DUMMY_CODE:CORE_ADDR:push_dummy_code:CORE_ADDR sp, CORE_ADDR funaddr, int using_gcc, struct value **args, int nargs, struct type *value_type, CORE_ADDR *real_pc, CORE_ADDR *bp_addr:sp, funaddr, using_gcc, args, nargs, value_type, real_pc, bp_addr:
+M::PUSH_DUMMY_CODE:CORE_ADDR:push_dummy_code:CORE_ADDR sp, CORE_ADDR funaddr, int using_gcc, struct value **args, int nargs, struct type *value_type, CORE_ADDR *real_pc, CORE_ADDR *bp_addr:sp, funaddr, using_gcc, args, nargs, value_type, real_pc, bp_addr
# Implement PUSH_DUMMY_CALL, then delete DEPRECATED_PUSH_DUMMY_FRAME.
-F:2:DEPRECATED_PUSH_DUMMY_FRAME:void:deprecated_push_dummy_frame:void:-:::0
+F:2:DEPRECATED_PUSH_DUMMY_FRAME:void:deprecated_push_dummy_frame:void:-
# Implement PUSH_DUMMY_CALL, then delete
# DEPRECATED_EXTRA_STACK_ALIGNMENT_NEEDED.
v:2:DEPRECATED_EXTRA_STACK_ALIGNMENT_NEEDED:int:deprecated_extra_stack_alignment_needed::::0:0::0:::
# MAP a GDB RAW register number onto a simulator register number. See
# also include/...-sim.h.
f:2:REGISTER_SIM_REGNO:int:register_sim_regno:int reg_nr:reg_nr:::legacy_register_sim_regno::0
-F:2:REGISTER_BYTES_OK:int:register_bytes_ok:long nr_bytes:nr_bytes::0:0
+F:2:REGISTER_BYTES_OK:int:register_bytes_ok:long nr_bytes:nr_bytes
f:2:CANNOT_FETCH_REGISTER:int:cannot_fetch_register:int regnum:regnum:::cannot_register_not::0
f:2:CANNOT_STORE_REGISTER:int:cannot_store_register:int regnum:regnum:::cannot_register_not::0
# setjmp/longjmp support.
-F:2:GET_LONGJMP_TARGET:int:get_longjmp_target:CORE_ADDR *pc:pc::0:0
+F:2:GET_LONGJMP_TARGET:int:get_longjmp_target:CORE_ADDR *pc:pc
# NOTE: cagney/2002-11-24: This function with predicate has a valid
# (callable) initial value. As a consequence, even when the predicate
# is false, the corresponding function works. This simplifies the
f:2:ADDRESS_TO_POINTER:void:address_to_pointer:struct type *type, void *buf, CORE_ADDR addr:type, buf, addr:::unsigned_address_to_pointer::0
F:2:INTEGER_TO_ADDRESS:CORE_ADDR:integer_to_address:struct type *type, void *buf:type, buf
#
-f:2:RETURN_VALUE_ON_STACK:int:return_value_on_stack:struct type *type:type:::generic_return_value_on_stack_not::0
-F:2:DEPRECATED_POP_FRAME:void:deprecated_pop_frame:void:-:::0
+F:2:DEPRECATED_POP_FRAME:void:deprecated_pop_frame:void:-
# NOTE: cagney/2003-03-24: Replaced by PUSH_ARGUMENTS.
-F:2:DEPRECATED_STORE_STRUCT_RETURN:void:deprecated_store_struct_return:CORE_ADDR addr, CORE_ADDR sp:addr, sp:::0
-#
+F:2:DEPRECATED_STORE_STRUCT_RETURN:void:deprecated_store_struct_return:CORE_ADDR addr, CORE_ADDR sp:addr, sp
+
+# It has been suggested that this, well actually its predecessor,
+# should take the type/value of the function to be called and not the
+# return type. This is left as an exercise for the reader.
+
+M:::enum return_value_convention:return_value:struct type *valtype, struct regcache *regcache, void *readbuf, const void *writebuf:valtype, regcache, readbuf, writebuf
+
+# The deprecated methods RETURN_VALUE_ON_STACK, EXTRACT_RETURN_VALUE,
+# STORE_RETURN_VALUE and USE_STRUCT_CONVENTION have all been folded
+# into RETURN_VALUE.
+
+f:2:RETURN_VALUE_ON_STACK:int:return_value_on_stack:struct type *type:type:::generic_return_value_on_stack_not::0
f:2:EXTRACT_RETURN_VALUE:void:extract_return_value:struct type *type, struct regcache *regcache, void *valbuf:type, regcache, valbuf:::legacy_extract_return_value::0
f:2:STORE_RETURN_VALUE:void:store_return_value:struct type *type, struct regcache *regcache, const void *valbuf:type, regcache, valbuf:::legacy_store_return_value::0
f:2:DEPRECATED_EXTRACT_RETURN_VALUE:void:deprecated_extract_return_value:struct type *type, char *regbuf, char *valbuf:type, regbuf, valbuf
f:2:DEPRECATED_STORE_RETURN_VALUE:void:deprecated_store_return_value:struct type *type, char *valbuf:type, valbuf
-#
-F:2:EXTRACT_STRUCT_VALUE_ADDRESS:CORE_ADDR:extract_struct_value_address:struct regcache *regcache:regcache:::0
-F:2:DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS:CORE_ADDR:deprecated_extract_struct_value_address:char *regbuf:regbuf:::0
f:2:USE_STRUCT_CONVENTION:int:use_struct_convention:int gcc_p, struct type *value_type:gcc_p, value_type:::generic_use_struct_convention::0
-#
-F:2:DEPRECATED_FRAME_INIT_SAVED_REGS:void:deprecated_frame_init_saved_regs:struct frame_info *frame:frame:::0
-F:2:DEPRECATED_INIT_EXTRA_FRAME_INFO:void:deprecated_init_extra_frame_info:int fromleaf, struct frame_info *frame:fromleaf, frame:::0
+
+# As of 2004-01-17 only the 32-bit SPARC ABI has been identified as an
+# ABI suitable for the implementation of a robust extract
+# struct-convention return-value address method (the sparc saves the
+# address in the callers frame). All the other cases so far examined,
+# the DEPRECATED_EXTRACT_STRUCT_VALUE implementation has been
+# erreneous - the code was incorrectly assuming that the return-value
+# address, stored in a register, was preserved across the entire
+# function call.
+
+# For the moment retain DEPRECATED_EXTRACT_STRUCT_VALUE as a marker of
+# the ABIs that are still to be analyzed - perhaps this should simply
+# be deleted. The commented out extract_returned_value_address method
+# is provided as a starting point for the 32-bit SPARC. It, or
+# something like it, along with changes to both infcmd.c and stack.c
+# will be needed for that case to work. NB: It is passed the callers
+# frame since it is only after the callee has returned that this
+# function is used.
+
+#M:::CORE_ADDR:extract_returned_value_address:struct frame_info *caller_frame:caller_frame
+F:2:DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS:CORE_ADDR:deprecated_extract_struct_value_address:struct regcache *regcache:regcache
+
+F:2:DEPRECATED_FRAME_INIT_SAVED_REGS:void:deprecated_frame_init_saved_regs:struct frame_info *frame:frame
+F:2:DEPRECATED_INIT_EXTRA_FRAME_INFO:void:deprecated_init_extra_frame_info:int fromleaf, struct frame_info *frame:fromleaf, frame
#
f:2:SKIP_PROLOGUE:CORE_ADDR:skip_prologue:CORE_ADDR ip:ip::0:0
-f:2:PROLOGUE_FRAMELESS_P:int:prologue_frameless_p:CORE_ADDR ip:ip::0:generic_prologue_frameless_p::0
f:2:INNER_THAN:int:inner_than:CORE_ADDR lhs, CORE_ADDR rhs:lhs, rhs::0:0
f::BREAKPOINT_FROM_PC:const unsigned char *:breakpoint_from_pc:CORE_ADDR *pcptr, int *lenptr:pcptr, lenptr:::0:
+M:2:ADJUST_BREAKPOINT_ADDRESS:CORE_ADDR:adjust_breakpoint_address:CORE_ADDR bpaddr:bpaddr
f:2:MEMORY_INSERT_BREAKPOINT:int:memory_insert_breakpoint:CORE_ADDR addr, char *contents_cache:addr, contents_cache::0:default_memory_insert_breakpoint::0
f:2:MEMORY_REMOVE_BREAKPOINT:int:memory_remove_breakpoint:CORE_ADDR addr, char *contents_cache:addr, contents_cache::0:default_memory_remove_breakpoint::0
-v:2:DECR_PC_AFTER_BREAK:CORE_ADDR:decr_pc_after_break::::0:-1
-f:2:PREPARE_TO_PROCEED:int:prepare_to_proceed:int select_it:select_it::0:default_prepare_to_proceed::0
-v:2:FUNCTION_START_OFFSET:CORE_ADDR:function_start_offset::::0:-1
+v:2:DECR_PC_AFTER_BREAK:CORE_ADDR:decr_pc_after_break::::0:::0
+v:2:FUNCTION_START_OFFSET:CORE_ADDR:function_start_offset::::0:::0
#
m::REMOTE_TRANSLATE_XFER_ADDRESS:void:remote_translate_xfer_address:struct regcache *regcache, CORE_ADDR gdb_addr, int gdb_len, CORE_ADDR *rem_addr, int *rem_len:regcache, gdb_addr, gdb_len, rem_addr, rem_len:::generic_remote_translate_xfer_address::0
#
-v:2:FRAME_ARGS_SKIP:CORE_ADDR:frame_args_skip::::0:-1
+v::FRAME_ARGS_SKIP:CORE_ADDR:frame_args_skip::::0:::0
f:2:FRAMELESS_FUNCTION_INVOCATION:int:frameless_function_invocation:struct frame_info *fi:fi:::generic_frameless_function_invocation_not::0
-F:2:DEPRECATED_FRAME_CHAIN:CORE_ADDR:deprecated_frame_chain:struct frame_info *frame:frame::0:0
-F:2:DEPRECATED_FRAME_CHAIN_VALID:int:deprecated_frame_chain_valid:CORE_ADDR chain, struct frame_info *thisframe:chain, thisframe::0:0
+F:2:DEPRECATED_FRAME_CHAIN:CORE_ADDR:deprecated_frame_chain:struct frame_info *frame:frame
+F:2:DEPRECATED_FRAME_CHAIN_VALID:int:deprecated_frame_chain_valid:CORE_ADDR chain, struct frame_info *thisframe:chain, thisframe
# DEPRECATED_FRAME_SAVED_PC has been replaced by UNWIND_PC. Please
# note, per UNWIND_PC's doco, that while the two have similar
# interfaces they have very different underlying implementations.
-F:2:DEPRECATED_FRAME_SAVED_PC:CORE_ADDR:deprecated_frame_saved_pc:struct frame_info *fi:fi::0:0
-M::UNWIND_PC:CORE_ADDR:unwind_pc:struct frame_info *next_frame:next_frame:
-M::UNWIND_SP:CORE_ADDR:unwind_sp:struct frame_info *next_frame:next_frame:
-f:2:FRAME_ARGS_ADDRESS:CORE_ADDR:frame_args_address:struct frame_info *fi:fi::0:get_frame_base::0
-f:2:FRAME_LOCALS_ADDRESS:CORE_ADDR:frame_locals_address:struct frame_info *fi:fi::0:get_frame_base::0
+F:2:DEPRECATED_FRAME_SAVED_PC:CORE_ADDR:deprecated_frame_saved_pc:struct frame_info *fi:fi
+M::UNWIND_PC:CORE_ADDR:unwind_pc:struct frame_info *next_frame:next_frame
+M::UNWIND_SP:CORE_ADDR:unwind_sp:struct frame_info *next_frame:next_frame
+# DEPRECATED_FRAME_ARGS_ADDRESS as been replaced by the per-frame
+# frame-base. Enable frame-base before frame-unwind.
+F::DEPRECATED_FRAME_ARGS_ADDRESS:CORE_ADDR:deprecated_frame_args_address:struct frame_info *fi:fi::get_frame_base:get_frame_base
+# DEPRECATED_FRAME_LOCALS_ADDRESS as been replaced by the per-frame
+# frame-base. Enable frame-base before frame-unwind.
+F::DEPRECATED_FRAME_LOCALS_ADDRESS:CORE_ADDR:deprecated_frame_locals_address:struct frame_info *fi:fi::get_frame_base:get_frame_base
F::DEPRECATED_SAVED_PC_AFTER_CALL:CORE_ADDR:deprecated_saved_pc_after_call:struct frame_info *frame:frame
F:2:FRAME_NUM_ARGS:int:frame_num_args:struct frame_info *frame:frame
#
-F:2:STACK_ALIGN:CORE_ADDR:stack_align:CORE_ADDR sp:sp::0:0
+# DEPRECATED_STACK_ALIGN has been replaced by an initial aligning call
+# to frame_align and the requirement that methods such as
+# push_dummy_call and frame_red_zone_size maintain correct stack/frame
+# alignment.
+F:2:DEPRECATED_STACK_ALIGN:CORE_ADDR:deprecated_stack_align:CORE_ADDR sp:sp
M:::CORE_ADDR:frame_align:CORE_ADDR address:address
-F:2:REG_STRUCT_HAS_ADDR:int:reg_struct_has_addr:int gcc_p, struct type *type:gcc_p, type::0:0
+# DEPRECATED_REG_STRUCT_HAS_ADDR has been replaced by
+# stabs_argument_has_addr.
+F:2:DEPRECATED_REG_STRUCT_HAS_ADDR:int:deprecated_reg_struct_has_addr:int gcc_p, struct type *type:gcc_p, type
+m:::int:stabs_argument_has_addr:struct type *type:type:::default_stabs_argument_has_addr::0
+v::FRAME_RED_ZONE_SIZE:int:frame_red_zone_size
v:2:PARM_BOUNDARY:int:parm_boundary
#
-v:2:TARGET_FLOAT_FORMAT:const struct floatformat *:float_format::::::default_float_format (gdbarch)::%s:(TARGET_FLOAT_FORMAT)->name
-v:2:TARGET_DOUBLE_FORMAT:const struct floatformat *:double_format::::::default_double_format (gdbarch)::%s:(TARGET_DOUBLE_FORMAT)->name
-v:2:TARGET_LONG_DOUBLE_FORMAT:const struct floatformat *:long_double_format::::::default_double_format (gdbarch)::%s:(TARGET_LONG_DOUBLE_FORMAT)->name
-f:2:CONVERT_FROM_FUNC_PTR_ADDR:CORE_ADDR:convert_from_func_ptr_addr:CORE_ADDR addr:addr:::core_addr_identity::0
+v:2:TARGET_FLOAT_FORMAT:const struct floatformat *:float_format::::::default_float_format (current_gdbarch)::%s:(TARGET_FLOAT_FORMAT)->name
+v:2:TARGET_DOUBLE_FORMAT:const struct floatformat *:double_format::::::default_double_format (current_gdbarch)::%s:(TARGET_DOUBLE_FORMAT)->name
+v:2:TARGET_LONG_DOUBLE_FORMAT:const struct floatformat *:long_double_format::::::default_double_format (current_gdbarch)::%s:(TARGET_LONG_DOUBLE_FORMAT)->name
+m:::CORE_ADDR:convert_from_func_ptr_addr:CORE_ADDR addr, struct target_ops *targ:addr, targ:::convert_from_func_ptr_addr_identity::0
# On some machines there are bits in addresses which are not really
# part of the address, but are used by the kernel, the hardware, etc.
# for special purposes. ADDR_BITS_REMOVE takes out any such bits so
# sort of generic thing to handle alignment or segmentation (it's
# possible it should be in TARGET_READ_PC instead).
f:2:ADDR_BITS_REMOVE:CORE_ADDR:addr_bits_remove:CORE_ADDR addr:addr:::core_addr_identity::0
-# It is not at all clear why SMASH_TEXT_ADDRESS is not folded into
+# It is not at all clear why SMASH_TEXT_ADDRESS is not folded into
# ADDR_BITS_REMOVE.
f:2:SMASH_TEXT_ADDRESS:CORE_ADDR:smash_text_address:CORE_ADDR addr:addr:::core_addr_identity::0
# FIXME/cagney/2001-01-18: This should be split in two. A target method that indicates if
#
# FIXME/cagney/2001-01-18: The logic is backwards. It should be asking if the target can
# single step. If not, then implement single step using breakpoints.
-F:2:SOFTWARE_SINGLE_STEP:void:software_single_step:enum target_signal sig, int insert_breakpoints_p:sig, insert_breakpoints_p::0:0
-f:2:TARGET_PRINT_INSN:int:print_insn:bfd_vma vma, disassemble_info *info:vma, info:::legacy_print_insn::0
+F:2:SOFTWARE_SINGLE_STEP:void:software_single_step:enum target_signal sig, int insert_breakpoints_p:sig, insert_breakpoints_p
+# FIXME: cagney/2003-08-28: Need to find a better way of selecting the
+# disassembler. Perhaphs objdump can handle it?
+f::TARGET_PRINT_INSN:int:print_insn:bfd_vma vma, struct disassemble_info *info:vma, info:::0:
f:2:SKIP_TRAMPOLINE_CODE:CORE_ADDR:skip_trampoline_code:CORE_ADDR pc:pc:::generic_skip_trampoline_code::0
+# If IN_SOLIB_DYNSYM_RESOLVE_CODE returns true, and SKIP_SOLIB_RESOLVER
+# evaluates non-zero, this is the address where the debugger will place
+# a step-resume breakpoint to get us past the dynamic linker.
+m:2:SKIP_SOLIB_RESOLVER:CORE_ADDR:skip_solib_resolver:CORE_ADDR pc:pc:::generic_skip_solib_resolver::0
# For SVR4 shared libraries, each call goes through a small piece of
# trampoline code in the ".plt" section. IN_SOLIB_CALL_TRAMPOLINE evaluates
# to nonzero if we are currently stopped in one of these.
# ARGC is the number of elements in the vector.
# ARGV is an array of strings, one per argument.
m::CONSTRUCT_INFERIOR_ARGUMENTS:char *:construct_inferior_arguments:int argc, char **argv:argc, argv:::construct_inferior_arguments::0
-F:2:DWARF2_BUILD_FRAME_INFO:void:dwarf2_build_frame_info:struct objfile *objfile:objfile:::0
f:2:ELF_MAKE_MSYMBOL_SPECIAL:void:elf_make_msymbol_special:asymbol *sym, struct minimal_symbol *msym:sym, msym:::default_elf_make_msymbol_special::0
f:2:COFF_MAKE_MSYMBOL_SPECIAL:void:coff_make_msymbol_special:int val, struct minimal_symbol *msym:val, msym:::default_coff_make_msymbol_special::0
v:2:NAME_OF_MALLOC:const char *:name_of_malloc::::"malloc":"malloc"::0:%s:NAME_OF_MALLOC
v:2:CANNOT_STEP_BREAKPOINT:int:cannot_step_breakpoint::::0:0::0
v:2:HAVE_NONSTEPPABLE_WATCHPOINT:int:have_nonsteppable_watchpoint::::0:0::0
F:2:ADDRESS_CLASS_TYPE_FLAGS:int:address_class_type_flags:int byte_size, int dwarf2_addr_class:byte_size, dwarf2_addr_class
-M:2:ADDRESS_CLASS_TYPE_FLAGS_TO_NAME:const char *:address_class_type_flags_to_name:int type_flags:type_flags:
+M:2:ADDRESS_CLASS_TYPE_FLAGS_TO_NAME:const char *:address_class_type_flags_to_name:int type_flags:type_flags
M:2:ADDRESS_CLASS_NAME_TO_TYPE_FLAGS:int:address_class_name_to_type_flags:const char *name, int *type_flags_ptr:name, type_flags_ptr
# Is a register in a group
m:::int:register_reggroup_p:int regnum, struct reggroup *reggroup:regnum, reggroup:::default_register_reggroup_p::0
-# Fetch the pointer to the ith function argument.
-F::FETCH_POINTER_ARGUMENT:CORE_ADDR:fetch_pointer_argument:struct frame_info *frame, int argi, struct type *type:frame, argi, type:::::::::
+# Fetch the pointer to the ith function argument.
+F::FETCH_POINTER_ARGUMENT:CORE_ADDR:fetch_pointer_argument:struct frame_info *frame, int argi, struct type *type:frame, argi, type
+
+# Return the appropriate register set for a core file section with
+# name SECT_NAME and size SECT_SIZE.
+M:::const struct regset *:regset_from_core_section:const char *sect_name, size_t sect_size:sect_name, sect_size
EOF
}
/* *INDENT-OFF* */ /* THIS FILE IS GENERATED */
/* Dynamic architecture support for GDB, the GNU debugger.
- Copyright 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+
+ Copyright 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free
+ Software Foundation, Inc.
This file is part of GDB.
#ifndef GDBARCH_H
#define GDBARCH_H
-#include "dis-asm.h" /* Get defs for disassemble_info, which unfortunately is a typedef. */
-#if !GDB_MULTI_ARCH
-/* Pull in function declarations refered to, indirectly, via macros. */
-#include "inferior.h" /* For unsigned_address_to_pointer(). */
-#include "symfile.h" /* For entry_point_address(). */
-#endif
-
struct floatformat;
struct ui_file;
struct frame_info;
struct minimal_symbol;
struct regcache;
struct reggroup;
+struct regset;
+struct disassemble_info;
+struct target_ops;
extern struct gdbarch *current_gdbarch;
printf "#endif\n"
printf "#endif\n"
printf "\n"
- printf "/* Default predicate for non- multi-arch targets. */\n"
- printf "#if (!GDB_MULTI_ARCH) && !defined (${macro}_P)\n"
- printf "#define ${macro}_P() (0)\n"
- printf "#endif\n"
- printf "\n"
printf "extern int gdbarch_${function}_p (struct gdbarch *gdbarch);\n"
printf "#if (GDB_MULTI_ARCH ${gt_level}) && defined (${macro}_P)\n"
printf "#error \"Non multi-arch definition of ${macro}\"\n"
fi
if class_is_variable_p
then
- if fallback_default_p || class_is_predicate_p
- then
- printf "\n"
- printf "/* Default (value) for non- multi-arch platforms. */\n"
- printf "#if (!GDB_MULTI_ARCH) && !defined (${macro})\n"
- echo "#define ${macro} (${fallbackdefault})" \
- | sed -e 's/\([^a-z_]\)\(gdbarch[^a-z_]\)/\1current_\2/g'
- printf "#endif\n"
- fi
printf "\n"
printf "extern ${returntype} gdbarch_${function} (struct gdbarch *gdbarch);\n"
printf "extern void set_gdbarch_${function} (struct gdbarch *gdbarch, ${returntype} ${function});\n"
fi
if class_is_function_p
then
- if class_is_multiarch_p ; then :
- elif fallback_default_p || class_is_predicate_p
- then
- printf "\n"
- printf "/* Default (function) for non- multi-arch platforms. */\n"
- printf "#if (!GDB_MULTI_ARCH) && !defined (${macro})\n"
- if [ "x${fallbackdefault}" = "x0" ]
- then
- if [ "x${actual}" = "x-" ]
- then
- printf "#define ${macro} (internal_error (__FILE__, __LINE__, \"${macro}\"), 0)\n"
- else
- printf "#define ${macro}(${actual}) (internal_error (__FILE__, __LINE__, \"${macro}\"), 0)\n"
- fi
- else
- # FIXME: Should be passing current_gdbarch through!
- echo "#define ${macro}(${actual}) (${fallbackdefault} (${actual}))" \
- | sed -e 's/\([^a-z_]\)\(gdbarch[^a-z_]\)/\1current_\2/g'
- fi
- printf "#endif\n"
- fi
printf "\n"
if [ "x${formal}" = "xvoid" ] && class_is_multiarch_p
then
extern void gdbarch_free (struct gdbarch *);
+/* Helper function. Allocate memory from the \`\`struct gdbarch''
+ obstack. The memory is freed when the corresponding architecture
+ is also freed. */
+
+extern void *gdbarch_obstack_zalloc (struct gdbarch *gdbarch, long size);
+#define GDBARCH_OBSTACK_CALLOC(GDBARCH, NR, TYPE) ((TYPE *) gdbarch_obstack_zalloc ((GDBARCH), (NR) * sizeof (TYPE)))
+#define GDBARCH_OBSTACK_ZALLOC(GDBARCH, TYPE) ((TYPE *) gdbarch_obstack_zalloc ((GDBARCH), sizeof (TYPE)))
+
+
/* Helper function. Force an update of the current architecture.
The actual architecture selected is determined by INFO, \`\`(gdb) set
extern int gdbarch_update_p (struct gdbarch_info info);
+/* Helper function. Find an architecture matching info.
+
+ INFO should be initialized using gdbarch_info_init, relevant fields
+ set, and then finished using gdbarch_info_fill.
+
+ Returns the corresponding architecture, or NULL if no matching
+ architecture was found. "current_gdbarch" is not updated. */
+
+extern struct gdbarch *gdbarch_find_by_info (struct gdbarch_info info);
+
+
+/* Helper function. Set the global "current_gdbarch" to "gdbarch".
+
+ FIXME: kettenis/20031124: Of the functions that follow, only
+ gdbarch_from_bfd is supposed to survive. The others will
+ dissappear since in the future GDB will (hopefully) be truly
+ multi-arch. However, for now we're still stuck with the concept of
+ a single active architecture. */
+
+extern void deprecated_current_gdbarch_select_hack (struct gdbarch *gdbarch);
+
/* Register per-architecture data-pointer.
The per-architecture data-pointer is either initialized explicitly
(set_gdbarch_data()) or implicitly (by INIT() via a call to
- gdbarch_data()). FREE() is called to delete either an existing
- data-pointer overridden by set_gdbarch_data() or when the
- architecture object is being deleted.
+ gdbarch_data()).
+
+ Memory for the per-architecture data shall be allocated using
+ gdbarch_obstack_zalloc. That memory will be deleted when the
+ corresponding architecture object is deleted.
When a previously created architecture is re-selected, the
per-architecture data-pointer for that previous architecture is
struct gdbarch_data;
typedef void *(gdbarch_data_init_ftype) (struct gdbarch *gdbarch);
-typedef void (gdbarch_data_free_ftype) (struct gdbarch *gdbarch,
- void *pointer);
-extern struct gdbarch_data *register_gdbarch_data (gdbarch_data_init_ftype *init,
- gdbarch_data_free_ftype *free);
+extern struct gdbarch_data *register_gdbarch_data (gdbarch_data_init_ftype *init);
extern void set_gdbarch_data (struct gdbarch *gdbarch,
struct gdbarch_data *data,
void *pointer);
extern void *gdbarch_data (struct gdbarch *gdbarch, struct gdbarch_data *);
+
/* Register per-architecture memory region.
Provide a memory-region swap mechanism. Per-architecture memory
-/* The target-system-dependent byte order is dynamic */
-
-extern int target_byte_order;
-#ifndef TARGET_BYTE_ORDER
-#define TARGET_BYTE_ORDER (target_byte_order + 0)
-#endif
-
-extern int target_byte_order_auto;
-#ifndef TARGET_BYTE_ORDER_AUTO
-#define TARGET_BYTE_ORDER_AUTO (target_byte_order_auto + 0)
-#endif
-
-
-
-/* The target-system-dependent BFD architecture is dynamic */
-
-extern int target_architecture_auto;
-#ifndef TARGET_ARCHITECTURE_AUTO
-#define TARGET_ARCHITECTURE_AUTO (target_architecture_auto + 0)
-#endif
-
-extern const struct bfd_arch_info *target_architecture;
-#ifndef TARGET_ARCHITECTURE
-#define TARGET_ARCHITECTURE (target_architecture + 0)
-#endif
-
-
-/* The target-system-dependent disassembler is semi-dynamic */
-
-/* Use gdb_disassemble, and gdbarch_print_insn instead. */
-extern int (*deprecated_tm_print_insn) (bfd_vma, disassemble_info*);
-
-/* Use set_gdbarch_print_insn instead. */
-extern disassemble_info deprecated_tm_print_insn_info;
-
/* Set the dynamic target-system-dependent parameters (architecture,
byte-order, ...) using information found in the BFD */
extern void initialize_current_architecture (void);
-/* For non-multiarched targets, do any initialization of the default
- gdbarch object necessary after the _initialize_MODULE functions
- have run. */
-extern void initialize_non_multiarch (void);
-
/* gdbarch trace variable */
extern int gdbarch_debug;
#include "defs.h"
#include "arch-utils.h"
-#if GDB_MULTI_ARCH
#include "gdbcmd.h"
#include "inferior.h" /* enum CALL_DUMMY_LOCATION et.al. */
-#else
-/* Just include everything in sight so that the every old definition
- of macro is visible. */
-#include "gdb_string.h"
-#include <ctype.h>
-#include "symtab.h"
-#include "frame.h"
-#include "inferior.h"
-#include "breakpoint.h"
-#include "gdb_wait.h"
-#include "gdbcore.h"
-#include "gdbcmd.h"
-#include "target.h"
-#include "gdbthread.h"
-#include "annotate.h"
-#include "symfile.h" /* for overlay functions */
-#include "value.h" /* For old tm.h/nm.h macros. */
-#endif
#include "symcat.h"
#include "floatformat.h"
#include "reggroups.h"
#include "osabi.h"
#include "symfile.h" /* For entry_point_address. */
+#include "gdb_obstack.h"
/* Static function declarations */
-static void verify_gdbarch (struct gdbarch *gdbarch);
static void alloc_gdbarch_data (struct gdbarch *);
-static void free_gdbarch_data (struct gdbarch *);
-static void init_gdbarch_swap (struct gdbarch *);
-static void clear_gdbarch_swap (struct gdbarch *);
-static void swapout_gdbarch_swap (struct gdbarch *);
-static void swapin_gdbarch_swap (struct gdbarch *);
/* Non-zero if we want to trace architecture code. */
printf "{\n"
printf " /* Has this architecture been fully initialized? */\n"
printf " int initialized_p;\n"
+printf "\n"
+printf " /* An obstack bound to the lifetime of the architecture. */\n"
+printf " struct obstack *obstack;\n"
+printf "\n"
printf " /* basic architectural information */\n"
function_list | while do_read
do
printf "struct gdbarch startup_gdbarch =\n"
printf "{\n"
printf " 1, /* Always initialized. */\n"
+printf " NULL, /* The obstack. */\n"
printf " /* basic architecture information */\n"
function_list | while do_read
do
};
struct gdbarch *current_gdbarch = &startup_gdbarch;
-
-/* Do any initialization needed for a non-multiarch configuration
- after the _initialize_MODULE functions have been run. */
-void
-initialize_non_multiarch (void)
-{
- alloc_gdbarch_data (&startup_gdbarch);
- /* Ensure that all swap areas are zeroed so that they again think
- they are starting from scratch. */
- clear_gdbarch_swap (&startup_gdbarch);
- init_gdbarch_swap (&startup_gdbarch);
-}
EOF
# Create a new gdbarch struct
-printf "\n"
-printf "\n"
cat <<EOF
+
/* Create a new \`\`struct gdbarch'' based on information provided by
\`\`struct gdbarch_info''. */
EOF
architecture. This ensures that the new architectures initial
values are not influenced by the previous architecture. Once
everything is parameterised with gdbarch, this will go away. */
- struct gdbarch *current_gdbarch = XMALLOC (struct gdbarch);
+ struct gdbarch *current_gdbarch;
+
+ /* Create an obstack for allocating all the per-architecture memory,
+ then use that to allocate the architecture vector. */
+ struct obstack *obstack = XMALLOC (struct obstack);
+ obstack_init (obstack);
+ current_gdbarch = obstack_alloc (obstack, sizeof (*current_gdbarch));
memset (current_gdbarch, 0, sizeof (*current_gdbarch));
+ current_gdbarch->obstack = obstack;
alloc_gdbarch_data (current_gdbarch);
printf "\n"
printf "\n"
cat <<EOF
+/* Allocate extra space using the per-architecture obstack. */
+
+void *
+gdbarch_obstack_zalloc (struct gdbarch *arch, long size)
+{
+ void *data = obstack_alloc (arch->obstack, size);
+ memset (data, 0, size);
+ return data;
+}
+
+
/* Free a gdbarch struct. This should never happen in normal
operation --- once you've created a gdbarch, you keep it around.
However, if an architecture's init function encounters an error
void
gdbarch_free (struct gdbarch *arch)
{
+ struct obstack *obstack;
gdb_assert (arch != NULL);
- free_gdbarch_data (arch);
- xfree (arch);
+ gdb_assert (!arch->initialized_p);
+ obstack = arch->obstack;
+ obstack_free (obstack, 0); /* Includes the ARCH. */
+ xfree (obstack);
}
EOF
# verify a new architecture
-printf "\n"
-printf "\n"
-printf "/* Ensure that all values in a GDBARCH are reasonable. */\n"
-printf "\n"
cat <<EOF
+
+
+/* Ensure that all values in a GDBARCH are reasonable. */
+
+/* NOTE/WARNING: The parameter is called \`\`current_gdbarch'' so that it
+ just happens to match the global variable \`\`current_gdbarch''. That
+ way macros refering to that variable get the local and not the global
+ version - ulgh. Once everything is parameterised with gdbarch, this
+ will go away. */
+
static void
-verify_gdbarch (struct gdbarch *gdbarch)
+verify_gdbarch (struct gdbarch *current_gdbarch)
{
struct ui_file *log;
struct cleanup *cleanups;
long dummy;
char *buf;
- /* Only perform sanity checks on a multi-arch target. */
- if (!GDB_MULTI_ARCH)
- return;
log = mem_fileopen ();
cleanups = make_cleanup_ui_file_delete (log);
/* fundamental */
- if (gdbarch->byte_order == BFD_ENDIAN_UNKNOWN)
+ if (current_gdbarch->byte_order == BFD_ENDIAN_UNKNOWN)
fprintf_unfiltered (log, "\n\tbyte-order");
- if (gdbarch->bfd_arch_info == NULL)
+ if (current_gdbarch->bfd_arch_info == NULL)
fprintf_unfiltered (log, "\n\tbfd_arch_info");
/* Check those that need to be defined for the given multi-arch level. */
EOF
elif [ -n "${invalid_p}" -a -n "${postdefault}" ]
then
printf " if (${invalid_p})\n"
- printf " gdbarch->${function} = ${postdefault};\n"
+ printf " current_gdbarch->${function} = ${postdefault};\n"
elif [ -n "${predefault}" -a -n "${postdefault}" ]
then
- printf " if (gdbarch->${function} == ${predefault})\n"
- printf " gdbarch->${function} = ${postdefault};\n"
+ printf " if (current_gdbarch->${function} == ${predefault})\n"
+ printf " current_gdbarch->${function} = ${postdefault};\n"
elif [ -n "${postdefault}" ]
then
- printf " if (gdbarch->${function} == 0)\n"
- printf " gdbarch->${function} = ${postdefault};\n"
+ printf " if (current_gdbarch->${function} == 0)\n"
+ printf " current_gdbarch->${function} = ${postdefault};\n"
elif [ -n "${invalid_p}" ]
then
printf " if ((GDB_MULTI_ARCH ${gt_level})\n"
elif [ -n "${predefault}" ]
then
printf " if ((GDB_MULTI_ARCH ${gt_level})\n"
- printf " && (gdbarch->${function} == ${predefault}))\n"
+ printf " && (current_gdbarch->${function} == ${predefault}))\n"
printf " fprintf_unfiltered (log, \"\\\\n\\\\t${function}\");\n"
fi
fi
will go away. */
void
-gdbarch_dump (struct gdbarch *gdbarch, struct ui_file *file)
+gdbarch_dump (struct gdbarch *current_gdbarch, struct ui_file *file)
{
fprintf_unfiltered (file,
"gdbarch_dump: GDB_MULTI_ARCH = %d\\n",
then
if class_is_multiarch_p
then
- printf " if (GDB_MULTI_ARCH)\n"
- printf " fprintf_unfiltered (file,\n"
- printf " \"gdbarch_dump: gdbarch_${function}_p() = %%d\\\\n\",\n"
- printf " gdbarch_${function}_p (current_gdbarch));\n"
+ printf " fprintf_unfiltered (file,\n"
+ printf " \"gdbarch_dump: gdbarch_${function}_p() = %%d\\\\n\",\n"
+ printf " gdbarch_${function}_p (current_gdbarch));\n"
else
printf "#ifdef ${macro}_P\n"
printf " fprintf_unfiltered (file,\n"
# multiarch functions don't have macros.
if class_is_multiarch_p
then
- printf " if (GDB_MULTI_ARCH)\n"
- printf " fprintf_unfiltered (file,\n"
- printf " \"gdbarch_dump: ${function} = 0x%%08lx\\\\n\",\n"
- printf " (long) current_gdbarch->${function});\n"
+ printf " fprintf_unfiltered (file,\n"
+ printf " \"gdbarch_dump: ${function} = 0x%%08lx\\\\n\",\n"
+ printf " (long) current_gdbarch->${function});\n"
continue
fi
# Print the macro definition.
printf "#ifdef ${macro}\n"
- if [ "x${returntype}" = "xvoid" ]
- then
- printf "#if GDB_MULTI_ARCH\n"
- printf " /* Macro might contain \`[{}]' when not multi-arch */\n"
- fi
if class_is_function_p
then
printf " fprintf_unfiltered (file,\n"
printf " \"gdbarch_dump: ${macro} # %%s\\\\n\",\n"
printf " XSTRING (${macro}));\n"
fi
- # Print the architecture vector value
- if [ "x${returntype}" = "xvoid" ]
- then
- printf "#endif\n"
- fi
if [ "x${print_p}" = "x()" ]
then
printf " gdbarch_dump_${function} (current_gdbarch);\n"
printf " ${print});\n"
elif class_is_function_p
then
- printf " if (GDB_MULTI_ARCH)\n"
- printf " fprintf_unfiltered (file,\n"
- printf " \"gdbarch_dump: ${macro} = <0x%%08lx>\\\\n\",\n"
- printf " (long) current_gdbarch->${function}\n"
- printf " /*${macro} ()*/);\n"
+ printf " fprintf_unfiltered (file,\n"
+ printf " \"gdbarch_dump: ${macro} = <0x%%08lx>\\\\n\",\n"
+ printf " (long) current_gdbarch->${function}\n"
+ printf " /*${macro} ()*/);\n"
else
printf " fprintf_unfiltered (file,\n"
printf " \"gdbarch_dump: ${macro} = %s\\\\n\",\n" "${fmt}"
printf "gdbarch_${function}_p (struct gdbarch *gdbarch)\n"
printf "{\n"
printf " gdb_assert (gdbarch != NULL);\n"
- if [ -n "${predicate}" ]
- then
- printf " return ${predicate};\n"
- else
- printf " return gdbarch->${function} != 0;\n"
- fi
+ printf " return ${predicate};\n"
printf "}\n"
fi
if class_is_function_p
fi
printf "{\n"
printf " gdb_assert (gdbarch != NULL);\n"
- printf " if (gdbarch->${function} == 0)\n"
- printf " internal_error (__FILE__, __LINE__,\n"
- printf " \"gdbarch: gdbarch_${function} invalid\");\n"
- if class_is_predicate_p && test -n "${predicate}"
+ printf " gdb_assert (gdbarch->${function} != NULL);\n"
+ if class_is_predicate_p && test -n "${predefault}"
then
# Allow a call to a function with a predicate.
- printf " /* Ignore predicate (${predicate}). */\n"
+ printf " /* Do not check predicate: ${predicate}, allow call. */\n"
fi
printf " if (gdbarch_debug >= 2)\n"
printf " fprintf_unfiltered (gdb_stdlog, \"gdbarch_${function} called\\\\n\");\n"
printf " /* Skip verify of ${function}, invalid_p == 0 */\n"
elif [ -n "${invalid_p}" ]
then
- printf " if (${invalid_p})\n"
- printf " internal_error (__FILE__, __LINE__,\n"
- printf " \"gdbarch: gdbarch_${function} invalid\");\n"
+ printf " /* Check variable is valid. */\n"
+ printf " gdb_assert (!(${invalid_p}));\n"
elif [ -n "${predefault}" ]
then
- printf " if (gdbarch->${function} == ${predefault})\n"
- printf " internal_error (__FILE__, __LINE__,\n"
- printf " \"gdbarch: gdbarch_${function} invalid\");\n"
+ printf " /* Check variable changed from pre-default. */\n"
+ printf " gdb_assert (gdbarch->${function} != ${predefault});\n"
fi
printf " if (gdbarch_debug >= 2)\n"
printf " fprintf_unfiltered (gdb_stdlog, \"gdbarch_${function} called\\\\n\");\n"
unsigned index;
int init_p;
gdbarch_data_init_ftype *init;
- gdbarch_data_free_ftype *free;
};
struct gdbarch_data_registration
};
struct gdbarch_data *
-register_gdbarch_data (gdbarch_data_init_ftype *init,
- gdbarch_data_free_ftype *free)
+register_gdbarch_data (gdbarch_data_init_ftype *init)
{
struct gdbarch_data_registration **curr;
/* Append the new registraration. */
(*curr)->data->index = gdbarch_data_registry.nr++;
(*curr)->data->init = init;
(*curr)->data->init_p = 1;
- (*curr)->data->free = free;
return (*curr)->data;
}
{
gdb_assert (gdbarch->data == NULL);
gdbarch->nr_data = gdbarch_data_registry.nr;
- gdbarch->data = xcalloc (gdbarch->nr_data, sizeof (void*));
-}
-
-static void
-free_gdbarch_data (struct gdbarch *gdbarch)
-{
- struct gdbarch_data_registration *rego;
- gdb_assert (gdbarch->data != NULL);
- for (rego = gdbarch_data_registry.registrations;
- rego != NULL;
- rego = rego->next)
- {
- struct gdbarch_data *data = rego->data;
- gdb_assert (data->index < gdbarch->nr_data);
- if (data->free != NULL && gdbarch->data[data->index] != NULL)
- {
- data->free (gdbarch, gdbarch->data[data->index]);
- gdbarch->data[data->index] = NULL;
- }
- }
- xfree (gdbarch->data);
- gdbarch->data = NULL;
+ gdbarch->data = GDBARCH_OBSTACK_CALLOC (gdbarch, gdbarch->nr_data, void *);
}
-
/* Initialize the current value of the specified per-architecture
data-pointer. */
void *pointer)
{
gdb_assert (data->index < gdbarch->nr_data);
- if (gdbarch->data[data->index] != NULL)
- {
- gdb_assert (data->free != NULL);
- data->free (gdbarch, gdbarch->data[data->index]);
- }
+ gdb_assert (gdbarch->data[data->index] == NULL);
gdbarch->data[data->index] = pointer;
}
}
static void
-clear_gdbarch_swap (struct gdbarch *gdbarch)
-{
- struct gdbarch_swap *curr;
- for (curr = gdbarch->swap;
- curr != NULL;
- curr = curr->next)
- {
- memset (curr->source->data, 0, curr->source->sizeof_data);
- }
-}
-
-static void
-init_gdbarch_swap (struct gdbarch *gdbarch)
+current_gdbarch_swap_init_hack (void)
{
struct gdbarch_swap_registration *rego;
- struct gdbarch_swap **curr = &gdbarch->swap;
+ struct gdbarch_swap **curr = ¤t_gdbarch->swap;
for (rego = gdbarch_swap_registry.registrations;
rego != NULL;
rego = rego->next)
{
if (rego->data != NULL)
{
- (*curr) = XMALLOC (struct gdbarch_swap);
+ (*curr) = GDBARCH_OBSTACK_ZALLOC (current_gdbarch,
+ struct gdbarch_swap);
(*curr)->source = rego;
- (*curr)->swap = xmalloc (rego->sizeof_data);
+ (*curr)->swap = gdbarch_obstack_zalloc (current_gdbarch,
+ rego->sizeof_data);
(*curr)->next = NULL;
curr = &(*curr)->next;
}
}
}
-static void
-swapout_gdbarch_swap (struct gdbarch *gdbarch)
+static struct gdbarch *
+current_gdbarch_swap_out_hack (void)
{
+ struct gdbarch *old_gdbarch = current_gdbarch;
struct gdbarch_swap *curr;
- for (curr = gdbarch->swap;
+
+ gdb_assert (old_gdbarch != NULL);
+ for (curr = old_gdbarch->swap;
curr != NULL;
curr = curr->next)
- memcpy (curr->swap, curr->source->data, curr->source->sizeof_data);
+ {
+ memcpy (curr->swap, curr->source->data, curr->source->sizeof_data);
+ memset (curr->source->data, 0, curr->source->sizeof_data);
+ }
+ current_gdbarch = NULL;
+ return old_gdbarch;
}
static void
-swapin_gdbarch_swap (struct gdbarch *gdbarch)
+current_gdbarch_swap_in_hack (struct gdbarch *new_gdbarch)
{
struct gdbarch_swap *curr;
- for (curr = gdbarch->swap;
+
+ gdb_assert (current_gdbarch == NULL);
+ for (curr = new_gdbarch->swap;
curr != NULL;
curr = curr->next)
memcpy (curr->source->data, curr->swap, curr->source->sizeof_data);
+ current_gdbarch = new_gdbarch;
}
const char **
gdbarch_printable_names (void)
{
- if (GDB_MULTI_ARCH)
+ /* Accumulate a list of names based on the registed list of
+ architectures. */
+ enum bfd_architecture a;
+ int nr_arches = 0;
+ const char **arches = NULL;
+ struct gdbarch_registration *rego;
+ for (rego = gdbarch_registry;
+ rego != NULL;
+ rego = rego->next)
{
- /* Accumulate a list of names based on the registed list of
- architectures. */
- enum bfd_architecture a;
- int nr_arches = 0;
- const char **arches = NULL;
- struct gdbarch_registration *rego;
- for (rego = gdbarch_registry;
- rego != NULL;
- rego = rego->next)
- {
- const struct bfd_arch_info *ap;
- ap = bfd_lookup_arch (rego->bfd_architecture, 0);
- if (ap == NULL)
- internal_error (__FILE__, __LINE__,
- "gdbarch_architecture_names: multi-arch unknown");
- do
- {
- append_name (&arches, &nr_arches, ap->printable_name);
- ap = ap->next;
- }
- while (ap != NULL);
- }
- append_name (&arches, &nr_arches, NULL);
- return arches;
+ const struct bfd_arch_info *ap;
+ ap = bfd_lookup_arch (rego->bfd_architecture, 0);
+ if (ap == NULL)
+ internal_error (__FILE__, __LINE__,
+ "gdbarch_architecture_names: multi-arch unknown");
+ do
+ {
+ append_name (&arches, &nr_arches, ap->printable_name);
+ ap = ap->next;
+ }
+ while (ap != NULL);
}
- else
- /* Just return all the architectures that BFD knows. Assume that
- the legacy architecture framework supports them. */
- return bfd_arch_list ();
+ append_name (&arches, &nr_arches, NULL);
+ return arches;
}
(*curr)->dump_tdep = dump_tdep;
(*curr)->arches = NULL;
(*curr)->next = NULL;
- /* When non- multi-arch, install whatever target dump routine we've
- been provided - hopefully that routine has been written correctly
- and works regardless of multi-arch. */
- if (!GDB_MULTI_ARCH && dump_tdep != NULL
- && startup_gdbarch.dump_tdep == NULL)
- startup_gdbarch.dump_tdep = dump_tdep;
}
void
}
-/* Update the current architecture. Return ZERO if the update request
- failed. */
+/* Find an architecture that matches the specified INFO. Create a new
+ architecture if needed. Return that new architecture. Assumes
+ that there is no current architecture. */
-int
-gdbarch_update_p (struct gdbarch_info info)
+static struct gdbarch *
+find_arch_by_info (struct gdbarch *old_gdbarch, struct gdbarch_info info)
{
struct gdbarch *new_gdbarch;
- struct gdbarch *old_gdbarch;
struct gdbarch_registration *rego;
+ /* The existing architecture has been swapped out - all this code
+ works from a clean slate. */
+ gdb_assert (current_gdbarch == NULL);
+
/* Fill in missing parts of the INFO struct using a number of
- sources: \`\`set ...''; INFOabfd supplied; existing target. */
-
- /* \`\`(gdb) set architecture ...'' */
- if (info.bfd_arch_info == NULL
- && !TARGET_ARCHITECTURE_AUTO)
- info.bfd_arch_info = TARGET_ARCHITECTURE;
- if (info.bfd_arch_info == NULL
- && info.abfd != NULL
- && bfd_get_arch (info.abfd) != bfd_arch_unknown
- && bfd_get_arch (info.abfd) != bfd_arch_obscure)
- info.bfd_arch_info = bfd_get_arch_info (info.abfd);
- if (info.bfd_arch_info == NULL)
- info.bfd_arch_info = TARGET_ARCHITECTURE;
-
- /* \`\`(gdb) set byte-order ...'' */
- if (info.byte_order == BFD_ENDIAN_UNKNOWN
- && !TARGET_BYTE_ORDER_AUTO)
- info.byte_order = TARGET_BYTE_ORDER;
- /* From the INFO struct. */
- if (info.byte_order == BFD_ENDIAN_UNKNOWN
- && info.abfd != NULL)
- info.byte_order = (bfd_big_endian (info.abfd) ? BFD_ENDIAN_BIG
- : bfd_little_endian (info.abfd) ? BFD_ENDIAN_LITTLE
- : BFD_ENDIAN_UNKNOWN);
- /* From the current target. */
- if (info.byte_order == BFD_ENDIAN_UNKNOWN)
- info.byte_order = TARGET_BYTE_ORDER;
-
- /* \`\`(gdb) set osabi ...'' is handled by gdbarch_lookup_osabi. */
- if (info.osabi == GDB_OSABI_UNINITIALIZED)
- info.osabi = gdbarch_lookup_osabi (info.abfd);
- if (info.osabi == GDB_OSABI_UNINITIALIZED)
- info.osabi = current_gdbarch->osabi;
+ sources: "set ..."; INFOabfd supplied; and the existing
+ architecture. */
+ gdbarch_info_fill (old_gdbarch, &info);
/* Must have found some sort of architecture. */
gdb_assert (info.bfd_arch_info != NULL);
if (gdbarch_debug)
{
fprintf_unfiltered (gdb_stdlog,
- "gdbarch_update: info.bfd_arch_info %s\n",
+ "find_arch_by_info: info.bfd_arch_info %s\n",
(info.bfd_arch_info != NULL
? info.bfd_arch_info->printable_name
: "(null)"));
fprintf_unfiltered (gdb_stdlog,
- "gdbarch_update: info.byte_order %d (%s)\n",
+ "find_arch_by_info: info.byte_order %d (%s)\n",
info.byte_order,
(info.byte_order == BFD_ENDIAN_BIG ? "big"
: info.byte_order == BFD_ENDIAN_LITTLE ? "little"
: "default"));
fprintf_unfiltered (gdb_stdlog,
- "gdbarch_update: info.osabi %d (%s)\n",
+ "find_arch_by_info: info.osabi %d (%s)\n",
info.osabi, gdbarch_osabi_name (info.osabi));
fprintf_unfiltered (gdb_stdlog,
- "gdbarch_update: info.abfd 0x%lx\n",
+ "find_arch_by_info: info.abfd 0x%lx\n",
(long) info.abfd);
fprintf_unfiltered (gdb_stdlog,
- "gdbarch_update: info.tdep_info 0x%lx\n",
+ "find_arch_by_info: info.tdep_info 0x%lx\n",
(long) info.tdep_info);
}
- /* Find the target that knows about this architecture. */
+ /* Find the tdep code that knows about this architecture. */
for (rego = gdbarch_registry;
rego != NULL;
rego = rego->next)
if (rego == NULL)
{
if (gdbarch_debug)
- fprintf_unfiltered (gdb_stdlog, "gdbarch_update: No matching architecture\\n");
+ fprintf_unfiltered (gdb_stdlog, "find_arch_by_info: "
+ "No matching architecture\n");
return 0;
}
- /* Swap the data belonging to the old target out setting the
- installed data to zero. This stops the ->init() function trying
- to refer to the previous architecture's global data structures. */
- swapout_gdbarch_swap (current_gdbarch);
- clear_gdbarch_swap (current_gdbarch);
-
- /* Save the previously selected architecture, setting the global to
- NULL. This stops ->init() trying to use the previous
- architecture's configuration. The previous architecture may not
- even be of the same architecture family. The most recent
- architecture of the same family is found at the head of the
- rego->arches list. */
- old_gdbarch = current_gdbarch;
- current_gdbarch = NULL;
-
- /* Ask the target for a replacement architecture. */
+ /* Ask the tdep code for an architecture that matches "info". */
new_gdbarch = rego->init (info, rego->arches);
- /* Did the target like it? No. Reject the change and revert to the
- old architecture. */
+ /* Did the tdep code like it? No. Reject the change and revert to
+ the old architecture. */
if (new_gdbarch == NULL)
{
if (gdbarch_debug)
- fprintf_unfiltered (gdb_stdlog, "gdbarch_update: Target rejected architecture\\n");
- swapin_gdbarch_swap (old_gdbarch);
- current_gdbarch = old_gdbarch;
- return 0;
+ fprintf_unfiltered (gdb_stdlog, "find_arch_by_info: "
+ "Target rejected architecture\n");
+ return NULL;
}
- /* Did the architecture change? No. Oops, put the old architecture
- back. */
- if (old_gdbarch == new_gdbarch)
+ /* Is this a pre-existing architecture (as determined by already
+ being initialized)? Move it to the front of the architecture
+ list (keeping the list sorted Most Recently Used). */
+ if (new_gdbarch->initialized_p)
{
+ struct gdbarch_list **list;
+ struct gdbarch_list *this;
if (gdbarch_debug)
- fprintf_unfiltered (gdb_stdlog, "gdbarch_update: Architecture 0x%08lx (%s) unchanged\\n",
+ fprintf_unfiltered (gdb_stdlog, "find_arch_by_info: "
+ "Previous architecture 0x%08lx (%s) selected\n",
(long) new_gdbarch,
new_gdbarch->bfd_arch_info->printable_name);
- swapin_gdbarch_swap (old_gdbarch);
- current_gdbarch = old_gdbarch;
- return 1;
+ /* Find the existing arch in the list. */
+ for (list = ®o->arches;
+ (*list) != NULL && (*list)->gdbarch != new_gdbarch;
+ list = &(*list)->next);
+ /* It had better be in the list of architectures. */
+ gdb_assert ((*list) != NULL && (*list)->gdbarch == new_gdbarch);
+ /* Unlink THIS. */
+ this = (*list);
+ (*list) = this->next;
+ /* Insert THIS at the front. */
+ this->next = rego->arches;
+ rego->arches = this;
+ /* Return it. */
+ return new_gdbarch;
}
- /* Is this a pre-existing architecture? Yes. Move it to the front
- of the list of architectures (keeping the list sorted Most
- Recently Used) and then copy it in. */
- {
- struct gdbarch_list **list;
- for (list = ®o->arches;
- (*list) != NULL;
- list = &(*list)->next)
- {
- if ((*list)->gdbarch == new_gdbarch)
- {
- struct gdbarch_list *this;
- if (gdbarch_debug)
- fprintf_unfiltered (gdb_stdlog,
- "gdbarch_update: Previous architecture 0x%08lx (%s) selected\n",
- (long) new_gdbarch,
- new_gdbarch->bfd_arch_info->printable_name);
- /* Unlink this. */
- this = (*list);
- (*list) = this->next;
- /* Insert in the front. */
- this->next = rego->arches;
- rego->arches = this;
- /* Copy the new architecture in. */
- current_gdbarch = new_gdbarch;
- swapin_gdbarch_swap (new_gdbarch);
- architecture_changed_event ();
- return 1;
- }
- }
- }
-
- /* Prepend this new architecture to the architecture list (keep the
- list sorted Most Recently Used). */
+ /* It's a new architecture. */
+ if (gdbarch_debug)
+ fprintf_unfiltered (gdb_stdlog, "find_arch_by_info: "
+ "New architecture 0x%08lx (%s) selected\n",
+ (long) new_gdbarch,
+ new_gdbarch->bfd_arch_info->printable_name);
+
+ /* Insert the new architecture into the front of the architecture
+ list (keep the list sorted Most Recently Used). */
{
struct gdbarch_list *this = XMALLOC (struct gdbarch_list);
this->next = rego->arches;
rego->arches = this;
}
- /* Switch to this new architecture marking it initialized. */
- current_gdbarch = new_gdbarch;
- current_gdbarch->initialized_p = 1;
- if (gdbarch_debug)
- {
- fprintf_unfiltered (gdb_stdlog,
- "gdbarch_update: New architecture 0x%08lx (%s) selected\\n",
- (long) new_gdbarch,
- new_gdbarch->bfd_arch_info->printable_name);
- }
-
/* Check that the newly installed architecture is valid. Plug in
any post init values. */
new_gdbarch->dump_tdep = rego->dump_tdep;
verify_gdbarch (new_gdbarch);
+ new_gdbarch->initialized_p = 1;
- /* Initialize the per-architecture memory (swap) areas.
- CURRENT_GDBARCH must be update before these modules are
- called. */
- init_gdbarch_swap (new_gdbarch);
-
- /* Initialize the per-architecture data. CURRENT_GDBARCH
- must be updated before these modules are called. */
- architecture_changed_event ();
+ /* Initialize any per-architecture swap areas. This phase requires
+ a valid global CURRENT_GDBARCH. Set it momentarially, and then
+ swap the entire architecture out. */
+ current_gdbarch = new_gdbarch;
+ current_gdbarch_swap_init_hack ();
+ current_gdbarch_swap_out_hack ();
if (gdbarch_debug)
- gdbarch_dump (current_gdbarch, gdb_stdlog);
+ gdbarch_dump (new_gdbarch, gdb_stdlog);
- return 1;
+ return new_gdbarch;
}
+struct gdbarch *
+gdbarch_find_by_info (struct gdbarch_info info)
+{
+ /* Save the previously selected architecture, setting the global to
+ NULL. This stops things like gdbarch->init() trying to use the
+ previous architecture's configuration. The previous architecture
+ may not even be of the same architecture family. The most recent
+ architecture of the same family is found at the head of the
+ rego->arches list. */
+ struct gdbarch *old_gdbarch = current_gdbarch_swap_out_hack ();
+
+ /* Find the specified architecture. */
+ struct gdbarch *new_gdbarch = find_arch_by_info (old_gdbarch, info);
+
+ /* Restore the existing architecture. */
+ gdb_assert (current_gdbarch == NULL);
+ current_gdbarch_swap_in_hack (old_gdbarch);
-/* Disassembler */
+ return new_gdbarch;
+}
-/* Pointer to the target-dependent disassembly function. */
-int (*deprecated_tm_print_insn) (bfd_vma, disassemble_info *);
+/* Make the specified architecture current, swapping the existing one
+ out. */
+
+void
+deprecated_current_gdbarch_select_hack (struct gdbarch *new_gdbarch)
+{
+ gdb_assert (new_gdbarch != NULL);
+ gdb_assert (current_gdbarch != NULL);
+ gdb_assert (new_gdbarch->initialized_p);
+ current_gdbarch_swap_out_hack ();
+ current_gdbarch_swap_in_hack (new_gdbarch);
+ architecture_changed_event ();
+}
extern void _initialize_gdbarch (void);
projects / deliverable / binutils-gdb.git / blobdiff