# Architecture commands for GDB, the GNU debugger.
#
-# Copyright (C) 1998-2015 Free Software Foundation, Inc.
+# Copyright (C) 1998-2017 Free Software Foundation, Inc.
#
# This file is part of GDB.
#
v:int:long_double_bit:::8 * sizeof (long double):8*TARGET_CHAR_BIT::0
v:const struct floatformat **:long_double_format:::::floatformats_ieee_double::pformat (gdbarch->long_double_format)
+# Returns the floating-point format to be used for values of length LENGTH.
+# NAME, if non-NULL, is the type name, which may be used to distinguish
+# different target formats of the same length.
+m:const struct floatformat **:floatformat_for_type:const char *name, int length:name, length:0:default_floatformat_for_type::0
+
# For most targets, a pointer on the target and its representation as an
# address in GDB have the same size and "look the same". For such a
# target, you need only set gdbarch_ptr_bit and gdbarch_addr_bit
# Return -1 if something goes wrong, 0 otherwise.
M:int:ax_pseudo_register_push_stack:struct agent_expr *ax, int reg:ax, reg
+# Some targets/architectures can do extra processing/display of
+# segmentation faults. E.g., Intel MPX boundary faults.
+# Call the architecture dependent function to handle the fault.
+# UIOUT is the output stream where the handler will place information.
+M:void:handle_segmentation_fault:struct ui_out *uiout:uiout
+
# GDB's standard (or well known) register numbers. These can map onto
# a real register or a pseudo (computed) register or not be defined at
# all (-1).
# Convert from an sdb register number to an internal gdb register number.
m:int:sdb_reg_to_regnum:int sdb_regnr:sdb_regnr::no_op_reg_to_regnum::0
# Provide a default mapping from a DWARF2 register number to a gdb REGNUM.
+# Return -1 for bad REGNUM. Note: Several targets get this wrong.
m:int:dwarf2_reg_to_regnum:int dwarf2_regnr:dwarf2_regnr::no_op_reg_to_regnum::0
m:const char *:register_name:int regnr:regnr::0
v:int:call_dummy_location::::AT_ENTRY_POINT::0
M:CORE_ADDR:push_dummy_code:CORE_ADDR sp, CORE_ADDR funaddr, struct value **args, int nargs, struct type *value_type, CORE_ADDR *real_pc, CORE_ADDR *bp_addr, struct regcache *regcache:sp, funaddr, args, nargs, value_type, real_pc, bp_addr, regcache
+# Return true if the code of FRAME is writable.
+m:int:code_of_frame_writable:struct frame_info *frame:frame::default_code_of_frame_writable::0
+
m:void:print_registers_info:struct ui_file *file, struct frame_info *frame, int regnum, int all:file, frame, regnum, all::default_print_registers_info::0
m:void:print_float_info:struct ui_file *file, struct frame_info *frame, const char *args:file, frame, args::default_print_float_info::0
M:void:print_vector_info:struct ui_file *file, struct frame_info *frame, const char *args:file, frame, args
M:CORE_ADDR:skip_entrypoint:CORE_ADDR ip:ip
f:int:inner_than:CORE_ADDR lhs, CORE_ADDR rhs:lhs, rhs:0:0
-m:const gdb_byte *:breakpoint_from_pc:CORE_ADDR *pcptr, int *lenptr:pcptr, lenptr::0:
-# Return the adjusted address and kind to use for Z0/Z1 packets.
-# KIND is usually the memory length of the breakpoint, but may have a
-# different target-specific meaning.
-m:void:remote_breakpoint_from_pc:CORE_ADDR *pcptr, int *kindptr:pcptr, kindptr:0:default_remote_breakpoint_from_pc::0
+m:const gdb_byte *:breakpoint_from_pc:CORE_ADDR *pcptr, int *lenptr:pcptr, lenptr:0:default_breakpoint_from_pc::0
+
+# Return the breakpoint kind for this target based on *PCPTR.
+m:int:breakpoint_kind_from_pc:CORE_ADDR *pcptr:pcptr::0:
+
+# Return the software breakpoint from KIND. KIND can have target
+# specific meaning like the Z0 kind parameter.
+# SIZE is set to the software breakpoint's length in memory.
+m:const gdb_byte *:sw_breakpoint_from_kind:int kind, int *size:kind, size::NULL::0
+
+# Return the breakpoint kind for this target based on the current
+# processor state (e.g. the current instruction mode on ARM) and the
+# *PCPTR. In default, it is gdbarch->breakpoint_kind_from_pc.
+m:int:breakpoint_kind_from_current_state:struct regcache *regcache, CORE_ADDR *pcptr:regcache, pcptr:0:default_breakpoint_kind_from_current_state::0
+
M:CORE_ADDR:adjust_breakpoint_address:CORE_ADDR bpaddr:bpaddr
m:int:memory_insert_breakpoint:struct bp_target_info *bp_tgt:bp_tgt:0:default_memory_insert_breakpoint::0
m:int:memory_remove_breakpoint:struct bp_target_info *bp_tgt:bp_tgt:0:default_memory_remove_breakpoint::0
# indicates if the target needs software single step. An ISA method to
# implement it.
#
-# FIXME/cagney/2001-01-18: This should be replaced with something that inserts
-# breakpoints using the breakpoint system instead of blatting memory directly
-# (as with rs6000).
-#
# FIXME/cagney/2001-01-18: The logic is backwards. It should be asking if the
# target can single step. If not, then implement single step using breakpoints.
#
-# A return value of 1 means that the software_single_step breakpoints
-# were inserted; 0 means they were not.
-F:int:software_single_step:struct frame_info *frame:frame
+# Return a vector of addresses on which the software single step
+# breakpoints should be inserted. NULL means software single step is
+# not used.
+# Multiple breakpoints may be inserted for some instructions such as
+# conditional branch. However, each implementation must always evaluate
+# the condition and only put the breakpoint at the branch destination if
+# the condition is true, so that we ensure forward progress when stepping
+# past a conditional branch to self.
+F:VEC (CORE_ADDR) *:software_single_step:struct regcache *regcache:regcache
# Return non-zero if the processor is executing a delay slot and a
# further single-step is needed before the instruction finishes.
# A target might have problems with watchpoints as soon as the stack
# frame of the current function has been destroyed. This mostly happens
-# as the first action in a funtion's epilogue. in_function_epilogue_p()
+# as the first action in a function's epilogue. stack_frame_destroyed_p()
# is defined to return a non-zero value if either the given addr is one
# instruction after the stack destroying instruction up to the trailing
# return instruction or if we can figure out that the stack frame has
# already been invalidated regardless of the value of addr. Targets
# which don't suffer from that problem could just let this functionality
# untouched.
-m:int:in_function_epilogue_p:CORE_ADDR addr:addr:0:generic_in_function_epilogue_p::0
+m:int:stack_frame_destroyed_p:CORE_ADDR addr:addr:0:generic_stack_frame_destroyed_p::0
# Process an ELF symbol in the minimal symbol table in a backend-specific
# way. Normally this hook is supposed to do nothing, however if required,
# then this hook can be used to apply tranformations to symbols that are
# How the core target converts a PTID from a core file to a string.
M:char *:core_pid_to_str:ptid_t ptid:ptid
+# How the core target extracts the name of a thread from a core file.
+M:const char *:core_thread_name:struct thread_info *thr:thr
+
# BFD target to use when generating a core file.
V:const char *:gcore_bfd_target:::0:0:::pstring (gdbarch->gcore_bfd_target)
# If your architecture doesn't need to adjust instructions before
# single-stepping them, consider using simple_displaced_step_copy_insn
# here.
+#
+# If the instruction cannot execute out of line, return NULL. The
+# core falls back to stepping past the instruction in-line instead in
+# that case.
M:struct displaced_step_closure *:displaced_step_copy_insn:CORE_ADDR from, CORE_ADDR to, struct regcache *regs:from, to, regs
# Return true if GDB should use hardware single-stepping to execute
m:int:has_shared_address_space:void:::default_has_shared_address_space::0
# True if a fast tracepoint can be set at an address.
-m:int:fast_tracepoint_valid_at:CORE_ADDR addr, int *isize, char **msg:addr, isize, msg::default_fast_tracepoint_valid_at::0
+m:int:fast_tracepoint_valid_at:CORE_ADDR addr, char **msg:addr, msg::default_fast_tracepoint_valid_at::0
+
+# Guess register state based on tracepoint location. Used for tracepoints
+# where no registers have been collected, but there's only one location,
+# allowing us to guess the PC value, and perhaps some other registers.
+# On entry, regcache has all registers marked as unavailable.
+m:void:guess_tracepoint_registers:struct regcache *regcache, CORE_ADDR addr:regcache, addr::default_guess_tracepoint_registers::0
# Return the "auto" target charset.
f:const char *:auto_charset:void::default_auto_charset:default_auto_charset::0
# Return 1 if an entry was read into *TYPEP and *VALP.
M:int:auxv_parse:gdb_byte **readptr, gdb_byte *endptr, CORE_ADDR *typep, CORE_ADDR *valp:readptr, endptr, typep, valp
+# Print the description of a single auxv entry described by TYPE and VAL
+# to FILE.
+m:void:print_auxv_entry:struct ui_file *file, CORE_ADDR type, CORE_ADDR val:file, type, val::default_print_auxv_entry::0
+
# Find the address range of the current inferior's vsyscall/vDSO, and
# write it to *RANGE. If the vsyscall's length can't be determined, a
# range with zero length is returned. Returns true if the vsyscall is
# Throw an error if it is not possible. Returned address is always valid.
f:CORE_ADDR:infcall_mmap:CORE_ADDR size, unsigned prot:size, prot::default_infcall_mmap::0
+# Deallocate SIZE bytes of memory at ADDR in inferior from gdbarch_infcall_mmap.
+# Print a warning if it is not possible.
+f:void:infcall_munmap:CORE_ADDR addr, CORE_ADDR size:addr, size::default_infcall_munmap::0
+
# Return string (caller has to use xfree for it) with options for GCC
# to produce code for this target, typically "-m64", "-m32" or "-m31".
# These options are put before CU's DW_AT_producer compilation options so that
# returns the BFD architecture name, which is correct in nearly every
# case.
m:const char *:gnu_triplet_regexp:void:::default_gnu_triplet_regexp::0
+
+# Return the size in 8-bit bytes of an addressable memory unit on this
+# architecture. This corresponds to the number of 8-bit bytes associated to
+# each address in memory.
+m:int:addressable_memory_unit_size:void:::default_addressable_memory_unit_size::0
+
EOF
}
/* Dynamic architecture support for GDB, the GNU debugger.
- Copyright (C) 1998-2015 Free Software Foundation, Inc.
+ Copyright (C) 1998-2017 Free Software Foundation, Inc.
This file is part of GDB.
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
-
+
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
+
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
struct objfile;
struct symbol;
struct displaced_step_closure;
-struct core_regset_section;
struct syscall;
struct agent_expr;
struct axs_value;
struct elf_internal_linux_prpsinfo;
struct mem_range;
struct syscalls_info;
+struct thread_info;
+struct ui_out;
+
+#include "regcache.h"
/* The architecture associated with the inferior through the
connection to the target.
bfd *abfd;
/* Use default: NULL (ZERO). */
- struct gdbarch_tdep_info *tdep_info;
+ void *tdep_info;
/* Use default: GDB_OSABI_UNINITIALIZED (-1). */
enum gdb_osabi osabi;
#define GDBARCH_OBSTACK_CALLOC(GDBARCH, NR, TYPE) ((TYPE *) gdbarch_obstack_zalloc ((GDBARCH), (NR) * sizeof (TYPE)))
#define GDBARCH_OBSTACK_ZALLOC(GDBARCH, TYPE) ((TYPE *) gdbarch_obstack_zalloc ((GDBARCH), sizeof (TYPE)))
+/* Duplicate STRING, returning an equivalent string that's allocated on the
+ obstack associated with GDBARCH. The string is freed when the corresponding
+ architecture is also freed. */
+
+extern char *gdbarch_obstack_strdup (struct gdbarch *arch, const char *string);
/* Helper function. Force an update of the current architecture.
#include "observer.h"
#include "regcache.h"
#include "objfiles.h"
+#include "auxv.h"
/* Static function declarations */
then use that to allocate the architecture vector. */
struct obstack *obstack = XNEW (struct obstack);
obstack_init (obstack);
- gdbarch = obstack_alloc (obstack, sizeof (*gdbarch));
+ gdbarch = XOBNEW (obstack, struct gdbarch);
memset (gdbarch, 0, sizeof (*gdbarch));
gdbarch->obstack = obstack;
return data;
}
+/* See gdbarch.h. */
+
+char *
+gdbarch_obstack_strdup (struct gdbarch *arch, const char *string)
+{
+ return obstack_strdup (arch->obstack, string);
+}
+
/* Free a gdbarch struct. This should never happen in normal
operation --- once you've created a gdbarch, you keep it around.
struct ui_file *log;
struct cleanup *cleanups;
long length;
- char *buf;
log = mem_fileopen ();
cleanups = make_cleanup_ui_file_delete (log);
fi
done
cat <<EOF
- buf = ui_file_xstrdup (log, &length);
- make_cleanup (xfree, buf);
- if (length > 0)
+ std::string buf = ui_file_as_string (log);
+ if (!buf.empty ())
internal_error (__FILE__, __LINE__,
_("verify_gdbarch: the following are invalid ...%s"),
- buf);
+ buf.c_str ());
do_cleanups (cleanups);
}
EOF
static void
append_name (const char ***buf, int *nr, const char *name)
{
- *buf = xrealloc (*buf, sizeof (char**) * (*nr + 1));
+ *buf = XRESIZEVEC (const char *, *buf, *nr + 1);
(*buf)[*nr] = name;
*nr += 1;
}
projects / deliverable / binutils-gdb.git / blobdiff