# Architecture commands for GDB, the GNU debugger.
#
-# Copyright (C) 1998-2012 Free Software Foundation, Inc.
+# Copyright (C) 1998-2020 Free Software Foundation, Inc.
#
# This file is part of GDB.
#
LANG=C ; export LANG
LC_ALL=C ; export LC_ALL
-
-compare_new ()
-{
- file=$1
- if test ! -r ${file}
- then
- echo "${file} missing? cp new-${file} ${file}" 1>&2
- elif diff -u ${file} new-${file}
- then
- echo "${file} unchanged" 1>&2
- else
- echo "${file} has changed? cp new-${file} ${file}" 1>&2
- fi
-}
-
-
# Format of the input table
read="class returntype function formal actual staticdefault predefault postdefault invalid_p print garbage_at_eol"
{
comment=""
class=""
- while read line
+ # On some SH's, 'read' trims leading and trailing whitespace by
+ # default (e.g., bash), while on others (e.g., dash), it doesn't.
+ # Set IFS to empty to disable the trimming everywhere.
+ # shellcheck disable=SC2162
+ while IFS='' read line
do
if test "${line}" = ""
then
else
# The semantics of IFS varies between different SH's. Some
- # treat ``::' as three fields while some treat it as just too.
- # Work around this by eliminating ``::'' ....
- line="`echo "${line}" | sed -e 's/::/: :/g' -e 's/::/: :/g'`"
+ # treat ``;;' as three fields while some treat it as just two.
+ # Work around this by eliminating ``;;'' ....
+ line="$(echo "${line}" | sed -e 's/;;/; ;/g' -e 's/;;/; ;/g')"
- OFS="${IFS}" ; IFS="[:]"
- eval read ${read} <<EOF
+ OFS="${IFS}" ; IFS="[;]"
+ eval read "${read}" <<EOF
${line}
EOF
IFS="${OFS}"
- if test -n "${garbage_at_eol}"
+ if test -n "${garbage_at_eol:-}"
then
echo "Garbage at end-of-line in ${line}" 1>&2
kill $$
# that ended up with just that space character.
for r in ${read}
do
- if eval test \"\${${r}}\" = \"\ \"
+ if eval test "\"\${${r}}\" = ' '"
then
- eval ${r}=""
+ eval "${r}="
fi
done
case "${class}" in
- m ) staticdefault="${predefault}" ;;
+ m ) staticdefault="${predefault:-}" ;;
M ) staticdefault="0" ;;
* ) test "${staticdefault}" || staticdefault=0 ;;
esac
case "${class}" in
F | V | M )
- case "${invalid_p}" in
+ case "${invalid_p:-}" in
"" )
if test -n "${predefault}"
then
#invalid_p="gdbarch->${function} == ${predefault}"
- predicate="gdbarch->${function} != ${predefault}"
+ predicate="gdbarch->${function:-} != ${predefault}"
elif class_is_variable_p
then
predicate="gdbarch->${function} != 0"
esac
esac
- # PREDEFAULT is a valid fallback definition of MEMBER when
- # multi-arch is not enabled. This ensures that the
- # default value, when multi-arch is the same as the
- # default value when not multi-arch. POSTDEFAULT is
- # always a valid definition of MEMBER as this again
- # ensures consistency.
-
- if [ -n "${postdefault}" ]
- then
- fallbackdefault="${postdefault}"
- elif [ -n "${predefault}" ]
- then
- fallbackdefault="${predefault}"
- else
- fallbackdefault="0"
- fi
-
#NOT YET: See gdbarch.log for basic verification of
# database
fallback_default_p ()
{
- [ -n "${postdefault}" -a "x${invalid_p}" != "x0" ] \
- || [ -n "${predefault}" -a "x${invalid_p}" = "x0" ]
+ { [ -n "${postdefault:-}" ] && [ "x${invalid_p}" != "x0" ]; } \
+ || { [ -n "${predefault}" ] && [ "x${invalid_p}" = "x0" ]; }
}
class_is_variable_p ()
{
# See below (DOCO) for description of each field
cat <<EOF
-i:const struct bfd_arch_info *:bfd_arch_info:::&bfd_default_arch_struct::::gdbarch_bfd_arch_info (gdbarch)->printable_name
+i;const struct bfd_arch_info *;bfd_arch_info;;;&bfd_default_arch_struct;;;;gdbarch_bfd_arch_info (gdbarch)->printable_name
#
-i:int:byte_order:::BFD_ENDIAN_BIG
-i:int:byte_order_for_code:::BFD_ENDIAN_BIG
+i;enum bfd_endian;byte_order;;;BFD_ENDIAN_BIG
+i;enum bfd_endian;byte_order_for_code;;;BFD_ENDIAN_BIG
#
-i:enum gdb_osabi:osabi:::GDB_OSABI_UNKNOWN
+i;enum gdb_osabi;osabi;;;GDB_OSABI_UNKNOWN
#
-i:const struct target_desc *:target_desc:::::::host_address_to_string (gdbarch->target_desc)
+i;const struct target_desc *;target_desc;;;;;;;host_address_to_string (gdbarch->target_desc)
-# The bit byte-order has to do just with numbering of bits in debugging symbols
-# and such. Conceptually, it's quite separate from byte/word byte order.
-v:int:bits_big_endian:::1:(gdbarch->byte_order == BFD_ENDIAN_BIG)::0
-
-# Number of bits in a char or unsigned char for the target machine.
-# Just like CHAR_BIT in <limits.h> but describes the target machine.
-# v:TARGET_CHAR_BIT:int:char_bit::::8 * sizeof (char):8::0:
-#
# Number of bits in a short or unsigned short for the target machine.
-v:int:short_bit:::8 * sizeof (short):2*TARGET_CHAR_BIT::0
+v;int;short_bit;;;8 * sizeof (short);2*TARGET_CHAR_BIT;;0
# Number of bits in an int or unsigned int for the target machine.
-v:int:int_bit:::8 * sizeof (int):4*TARGET_CHAR_BIT::0
+v;int;int_bit;;;8 * sizeof (int);4*TARGET_CHAR_BIT;;0
# Number of bits in a long or unsigned long for the target machine.
-v:int:long_bit:::8 * sizeof (long):4*TARGET_CHAR_BIT::0
+v;int;long_bit;;;8 * sizeof (long);4*TARGET_CHAR_BIT;;0
# Number of bits in a long long or unsigned long long for the target
# machine.
-v:int:long_long_bit:::8 * sizeof (LONGEST):2*gdbarch->long_bit::0
-# Alignment of a long long or unsigned long long for the target
-# machine.
-v:int:long_long_align_bit:::8 * sizeof (LONGEST):2*gdbarch->long_bit::0
+v;int;long_long_bit;;;8 * sizeof (LONGEST);2*gdbarch->long_bit;;0
# The ABI default bit-size and format for "half", "float", "double", and
# "long double". These bit/format pairs should eventually be combined
# Each format describes both the big and little endian layouts (if
# useful).
-v:int:half_bit:::16:2*TARGET_CHAR_BIT::0
-v:const struct floatformat **:half_format:::::floatformats_ieee_half::pformat (gdbarch->half_format)
-v:int:float_bit:::8 * sizeof (float):4*TARGET_CHAR_BIT::0
-v:const struct floatformat **:float_format:::::floatformats_ieee_single::pformat (gdbarch->float_format)
-v:int:double_bit:::8 * sizeof (double):8*TARGET_CHAR_BIT::0
-v:const struct floatformat **:double_format:::::floatformats_ieee_double::pformat (gdbarch->double_format)
-v:int:long_double_bit:::8 * sizeof (long double):8*TARGET_CHAR_BIT::0
-v:const struct floatformat **:long_double_format:::::floatformats_ieee_double::pformat (gdbarch->long_double_format)
+v;int;half_bit;;;16;2*TARGET_CHAR_BIT;;0
+v;const struct floatformat **;half_format;;;;;floatformats_ieee_half;;pformat (gdbarch->half_format)
+v;int;float_bit;;;8 * sizeof (float);4*TARGET_CHAR_BIT;;0
+v;const struct floatformat **;float_format;;;;;floatformats_ieee_single;;pformat (gdbarch->float_format)
+v;int;double_bit;;;8 * sizeof (double);8*TARGET_CHAR_BIT;;0
+v;const struct floatformat **;double_format;;;;;floatformats_ieee_double;;pformat (gdbarch->double_format)
+v;int;long_double_bit;;;8 * sizeof (long double);8*TARGET_CHAR_BIT;;0
+v;const struct floatformat **;long_double_format;;;;;floatformats_ieee_double;;pformat (gdbarch->long_double_format)
+
+# The ABI default bit-size for "wchar_t". wchar_t is a built-in type
+# starting with C++11.
+v;int;wchar_bit;;;8 * sizeof (wchar_t);4*TARGET_CHAR_BIT;;0
+# One if \`wchar_t' is signed, zero if unsigned.
+v;int;wchar_signed;;;1;-1;1
+
+# Returns the floating-point format to be used for values of length LENGTH.
+# NAME, if non-NULL, is the type name, which may be used to distinguish
+# different target formats of the same length.
+m;const struct floatformat **;floatformat_for_type;const char *name, int length;name, length;0;default_floatformat_for_type;;0
# For most targets, a pointer on the target and its representation as an
# address in GDB have the same size and "look the same". For such a
# gdbarch_address_to_pointer as well.
#
# ptr_bit is the size of a pointer on the target
-v:int:ptr_bit:::8 * sizeof (void*):gdbarch->int_bit::0
+v;int;ptr_bit;;;8 * sizeof (void*);gdbarch->int_bit;;0
# addr_bit is the size of a target address as represented in gdb
-v:int:addr_bit:::8 * sizeof (void*):0:gdbarch_ptr_bit (gdbarch):
+v;int;addr_bit;;;8 * sizeof (void*);0;gdbarch_ptr_bit (gdbarch);
#
# dwarf2_addr_size is the target address size as used in the Dwarf debug
# info. For .debug_frame FDEs, this is supposed to be the target address
# Note that dwarf2_addr_size only needs to be redefined by a target if the
# GCC back-end defines a DWARF2_ADDR_SIZE other than the target pointer size,
# and if Dwarf versions < 4 need to be supported.
-v:int:dwarf2_addr_size:::sizeof (void*):0:gdbarch_ptr_bit (gdbarch) / TARGET_CHAR_BIT:
+v;int;dwarf2_addr_size;;;sizeof (void*);0;gdbarch_ptr_bit (gdbarch) / TARGET_CHAR_BIT;
#
# One if \`char' acts like \`signed char', zero if \`unsigned char'.
-v:int:char_signed:::1:-1:1
+v;int;char_signed;;;1;-1;1
#
-F:CORE_ADDR:read_pc:struct regcache *regcache:regcache
-F:void:write_pc:struct regcache *regcache, CORE_ADDR val:regcache, val
+F;CORE_ADDR;read_pc;readable_regcache *regcache;regcache
+F;void;write_pc;struct regcache *regcache, CORE_ADDR val;regcache, val
# Function for getting target's idea of a frame pointer. FIXME: GDB's
# whole scheme for dealing with "frames" and "frame pointers" needs a
# serious shakedown.
-m:void:virtual_frame_pointer:CORE_ADDR pc, int *frame_regnum, LONGEST *frame_offset:pc, frame_regnum, frame_offset:0:legacy_virtual_frame_pointer::0
+m;void;virtual_frame_pointer;CORE_ADDR pc, int *frame_regnum, LONGEST *frame_offset;pc, frame_regnum, frame_offset;0;legacy_virtual_frame_pointer;;0
#
-M:enum register_status:pseudo_register_read:struct regcache *regcache, int cookednum, gdb_byte *buf:regcache, cookednum, buf
+M;enum register_status;pseudo_register_read;readable_regcache *regcache, int cookednum, gdb_byte *buf;regcache, cookednum, buf
# Read a register into a new struct value. If the register is wholly
# or partly unavailable, this should call mark_value_bytes_unavailable
# as appropriate. If this is defined, then pseudo_register_read will
# never be called.
-M:struct value *:pseudo_register_read_value:struct regcache *regcache, int cookednum:regcache, cookednum
-M:void:pseudo_register_write:struct regcache *regcache, int cookednum, const gdb_byte *buf:regcache, cookednum, buf
+M;struct value *;pseudo_register_read_value;readable_regcache *regcache, int cookednum;regcache, cookednum
+M;void;pseudo_register_write;struct regcache *regcache, int cookednum, const gdb_byte *buf;regcache, cookednum, buf
#
-v:int:num_regs:::0:-1
+v;int;num_regs;;;0;-1
# This macro gives the number of pseudo-registers that live in the
# register namespace but do not get fetched or stored on the target.
# These pseudo-registers may be aliases for other registers,
# combinations of other registers, or they may be computed by GDB.
-v:int:num_pseudo_regs:::0:0::0
+v;int;num_pseudo_regs;;;0;0;;0
# Assemble agent expression bytecode to collect pseudo-register REG.
# Return -1 if something goes wrong, 0 otherwise.
-M:int:ax_pseudo_register_collect:struct agent_expr *ax, int reg:ax, reg
+M;int;ax_pseudo_register_collect;struct agent_expr *ax, int reg;ax, reg
# Assemble agent expression bytecode to push the value of pseudo-register
# REG on the interpreter stack.
# Return -1 if something goes wrong, 0 otherwise.
-M:int:ax_pseudo_register_push_stack:struct agent_expr *ax, int reg:ax, reg
+M;int;ax_pseudo_register_push_stack;struct agent_expr *ax, int reg;ax, reg
+
+# Some targets/architectures can do extra processing/display of
+# segmentation faults. E.g., Intel MPX boundary faults.
+# Call the architecture dependent function to handle the fault.
+# UIOUT is the output stream where the handler will place information.
+M;void;handle_segmentation_fault;struct ui_out *uiout;uiout
# GDB's standard (or well known) register numbers. These can map onto
# a real register or a pseudo (computed) register or not be defined at
# all (-1).
# gdbarch_sp_regnum will hopefully be replaced by UNWIND_SP.
-v:int:sp_regnum:::-1:-1::0
-v:int:pc_regnum:::-1:-1::0
-v:int:ps_regnum:::-1:-1::0
-v:int:fp0_regnum:::0:-1::0
+v;int;sp_regnum;;;-1;-1;;0
+v;int;pc_regnum;;;-1;-1;;0
+v;int;ps_regnum;;;-1;-1;;0
+v;int;fp0_regnum;;;0;-1;;0
# Convert stab register number (from \`r\' declaration) to a gdb REGNUM.
-m:int:stab_reg_to_regnum:int stab_regnr:stab_regnr::no_op_reg_to_regnum::0
+m;int;stab_reg_to_regnum;int stab_regnr;stab_regnr;;no_op_reg_to_regnum;;0
# Provide a default mapping from a ecoff register number to a gdb REGNUM.
-m:int:ecoff_reg_to_regnum:int ecoff_regnr:ecoff_regnr::no_op_reg_to_regnum::0
+m;int;ecoff_reg_to_regnum;int ecoff_regnr;ecoff_regnr;;no_op_reg_to_regnum;;0
# Convert from an sdb register number to an internal gdb register number.
-m:int:sdb_reg_to_regnum:int sdb_regnr:sdb_regnr::no_op_reg_to_regnum::0
+m;int;sdb_reg_to_regnum;int sdb_regnr;sdb_regnr;;no_op_reg_to_regnum;;0
# Provide a default mapping from a DWARF2 register number to a gdb REGNUM.
-m:int:dwarf2_reg_to_regnum:int dwarf2_regnr:dwarf2_regnr::no_op_reg_to_regnum::0
-m:const char *:register_name:int regnr:regnr::0
+# Return -1 for bad REGNUM. Note: Several targets get this wrong.
+m;int;dwarf2_reg_to_regnum;int dwarf2_regnr;dwarf2_regnr;;no_op_reg_to_regnum;;0
+m;const char *;register_name;int regnr;regnr;;0
# Return the type of a register specified by the architecture. Only
# the register cache should call this function directly; others should
# use "register_type".
-M:struct type *:register_type:int reg_nr:reg_nr
-
-# See gdbint.texinfo, and PUSH_DUMMY_CALL.
-M:struct frame_id:dummy_id:struct frame_info *this_frame:this_frame
+M;struct type *;register_type;int reg_nr;reg_nr
+
+# Generate a dummy frame_id for THIS_FRAME assuming that the frame is
+# a dummy frame. A dummy frame is created before an inferior call,
+# the frame_id returned here must match the frame_id that was built
+# for the inferior call. Usually this means the returned frame_id's
+# stack address should match the address returned by
+# gdbarch_push_dummy_call, and the returned frame_id's code address
+# should match the address at which the breakpoint was set in the dummy
+# frame.
+m;struct frame_id;dummy_id;struct frame_info *this_frame;this_frame;;default_dummy_id;;0
# Implement DUMMY_ID and PUSH_DUMMY_CALL, then delete
# deprecated_fp_regnum.
-v:int:deprecated_fp_regnum:::-1:-1::0
+v;int;deprecated_fp_regnum;;;-1;-1;;0
-# See gdbint.texinfo. See infcall.c.
-M:CORE_ADDR:push_dummy_call:struct value *function, struct regcache *regcache, CORE_ADDR bp_addr, int nargs, struct value **args, CORE_ADDR sp, int struct_return, CORE_ADDR struct_addr:function, regcache, bp_addr, nargs, args, sp, struct_return, struct_addr
-v:int:call_dummy_location::::AT_ENTRY_POINT::0
-M:CORE_ADDR:push_dummy_code:CORE_ADDR sp, CORE_ADDR funaddr, struct value **args, int nargs, struct type *value_type, CORE_ADDR *real_pc, CORE_ADDR *bp_addr, struct regcache *regcache:sp, funaddr, args, nargs, value_type, real_pc, bp_addr, regcache
+M;CORE_ADDR;push_dummy_call;struct value *function, struct regcache *regcache, CORE_ADDR bp_addr, int nargs, struct value **args, CORE_ADDR sp, function_call_return_method return_method, CORE_ADDR struct_addr;function, regcache, bp_addr, nargs, args, sp, return_method, struct_addr
+v;int;call_dummy_location;;;;AT_ENTRY_POINT;;0
+M;CORE_ADDR;push_dummy_code;CORE_ADDR sp, CORE_ADDR funaddr, struct value **args, int nargs, struct type *value_type, CORE_ADDR *real_pc, CORE_ADDR *bp_addr, struct regcache *regcache;sp, funaddr, args, nargs, value_type, real_pc, bp_addr, regcache
-m:void:print_registers_info:struct ui_file *file, struct frame_info *frame, int regnum, int all:file, frame, regnum, all::default_print_registers_info::0
-M:void:print_float_info:struct ui_file *file, struct frame_info *frame, const char *args:file, frame, args
-M:void:print_vector_info:struct ui_file *file, struct frame_info *frame, const char *args:file, frame, args
+# Return true if the code of FRAME is writable.
+m;int;code_of_frame_writable;struct frame_info *frame;frame;;default_code_of_frame_writable;;0
+
+m;void;print_registers_info;struct ui_file *file, struct frame_info *frame, int regnum, int all;file, frame, regnum, all;;default_print_registers_info;;0
+m;void;print_float_info;struct ui_file *file, struct frame_info *frame, const char *args;file, frame, args;;default_print_float_info;;0
+M;void;print_vector_info;struct ui_file *file, struct frame_info *frame, const char *args;file, frame, args
# MAP a GDB RAW register number onto a simulator register number. See
# also include/...-sim.h.
-m:int:register_sim_regno:int reg_nr:reg_nr::legacy_register_sim_regno::0
-m:int:cannot_fetch_register:int regnum:regnum::cannot_register_not::0
-m:int:cannot_store_register:int regnum:regnum::cannot_register_not::0
-# setjmp/longjmp support.
-F:int:get_longjmp_target:struct frame_info *frame, CORE_ADDR *pc:frame, pc
+m;int;register_sim_regno;int reg_nr;reg_nr;;legacy_register_sim_regno;;0
+m;int;cannot_fetch_register;int regnum;regnum;;cannot_register_not;;0
+m;int;cannot_store_register;int regnum;regnum;;cannot_register_not;;0
+
+# Determine the address where a longjmp will land and save this address
+# in PC. Return nonzero on success.
#
-v:int:believe_pcc_promotion:::::::
+# FRAME corresponds to the longjmp frame.
+F;int;get_longjmp_target;struct frame_info *frame, CORE_ADDR *pc;frame, pc
+
+#
+v;int;believe_pcc_promotion;;;;;;;
#
-m:int:convert_register_p:int regnum, struct type *type:regnum, type:0:generic_convert_register_p::0
-f:int:register_to_value:struct frame_info *frame, int regnum, struct type *type, gdb_byte *buf, int *optimizedp, int *unavailablep:frame, regnum, type, buf, optimizedp, unavailablep:0
-f:void:value_to_register:struct frame_info *frame, int regnum, struct type *type, const gdb_byte *buf:frame, regnum, type, buf:0
+m;int;convert_register_p;int regnum, struct type *type;regnum, type;0;generic_convert_register_p;;0
+f;int;register_to_value;struct frame_info *frame, int regnum, struct type *type, gdb_byte *buf, int *optimizedp, int *unavailablep;frame, regnum, type, buf, optimizedp, unavailablep;0
+f;void;value_to_register;struct frame_info *frame, int regnum, struct type *type, const gdb_byte *buf;frame, regnum, type, buf;0
# Construct a value representing the contents of register REGNUM in
-# frame FRAME, interpreted as type TYPE. The routine needs to
+# frame FRAME_ID, interpreted as type TYPE. The routine needs to
# allocate and return a struct value with all value attributes
# (but not the value contents) filled in.
-f:struct value *:value_from_register:struct type *type, int regnum, struct frame_info *frame:type, regnum, frame::default_value_from_register::0
+m;struct value *;value_from_register;struct type *type, int regnum, struct frame_id frame_id;type, regnum, frame_id;;default_value_from_register;;0
#
-m:CORE_ADDR:pointer_to_address:struct type *type, const gdb_byte *buf:type, buf::unsigned_pointer_to_address::0
-m:void:address_to_pointer:struct type *type, gdb_byte *buf, CORE_ADDR addr:type, buf, addr::unsigned_address_to_pointer::0
-M:CORE_ADDR:integer_to_address:struct type *type, const gdb_byte *buf:type, buf
+m;CORE_ADDR;pointer_to_address;struct type *type, const gdb_byte *buf;type, buf;;unsigned_pointer_to_address;;0
+m;void;address_to_pointer;struct type *type, gdb_byte *buf, CORE_ADDR addr;type, buf, addr;;unsigned_address_to_pointer;;0
+M;CORE_ADDR;integer_to_address;struct type *type, const gdb_byte *buf;type, buf
# Return the return-value convention that will be used by FUNCTION
# to return a value of type VALTYPE. FUNCTION may be NULL in which
# stored into the appropriate register. This can be used when we want
# to force the value returned by a function (see the "return" command
# for instance).
-M:enum return_value_convention:return_value:struct value *function, struct type *valtype, struct regcache *regcache, gdb_byte *readbuf, const gdb_byte *writebuf:function, valtype, regcache, readbuf, writebuf
-
-m:CORE_ADDR:skip_prologue:CORE_ADDR ip:ip:0:0
-M:CORE_ADDR:skip_main_prologue:CORE_ADDR ip:ip
-f:int:inner_than:CORE_ADDR lhs, CORE_ADDR rhs:lhs, rhs:0:0
-m:const gdb_byte *:breakpoint_from_pc:CORE_ADDR *pcptr, int *lenptr:pcptr, lenptr::0:
-# Return the adjusted address and kind to use for Z0/Z1 packets.
-# KIND is usually the memory length of the breakpoint, but may have a
-# different target-specific meaning.
-m:void:remote_breakpoint_from_pc:CORE_ADDR *pcptr, int *kindptr:pcptr, kindptr:0:default_remote_breakpoint_from_pc::0
-M:CORE_ADDR:adjust_breakpoint_address:CORE_ADDR bpaddr:bpaddr
-m:int:memory_insert_breakpoint:struct bp_target_info *bp_tgt:bp_tgt:0:default_memory_insert_breakpoint::0
-m:int:memory_remove_breakpoint:struct bp_target_info *bp_tgt:bp_tgt:0:default_memory_remove_breakpoint::0
-v:CORE_ADDR:decr_pc_after_break:::0:::0
+M;enum return_value_convention;return_value;struct value *function, struct type *valtype, struct regcache *regcache, gdb_byte *readbuf, const gdb_byte *writebuf;function, valtype, regcache, readbuf, writebuf
+
+# Return true if the return value of function is stored in the first hidden
+# parameter. In theory, this feature should be language-dependent, specified
+# by language and its ABI, such as C++. Unfortunately, compiler may
+# implement it to a target-dependent feature. So that we need such hook here
+# to be aware of this in GDB.
+m;int;return_in_first_hidden_param_p;struct type *type;type;;default_return_in_first_hidden_param_p;;0
+
+m;CORE_ADDR;skip_prologue;CORE_ADDR ip;ip;0;0
+M;CORE_ADDR;skip_main_prologue;CORE_ADDR ip;ip
+# On some platforms, a single function may provide multiple entry points,
+# e.g. one that is used for function-pointer calls and a different one
+# that is used for direct function calls.
+# In order to ensure that breakpoints set on the function will trigger
+# no matter via which entry point the function is entered, a platform
+# may provide the skip_entrypoint callback. It is called with IP set
+# to the main entry point of a function (as determined by the symbol table),
+# and should return the address of the innermost entry point, where the
+# actual breakpoint needs to be set. Note that skip_entrypoint is used
+# by GDB common code even when debugging optimized code, where skip_prologue
+# is not used.
+M;CORE_ADDR;skip_entrypoint;CORE_ADDR ip;ip
+
+f;int;inner_than;CORE_ADDR lhs, CORE_ADDR rhs;lhs, rhs;0;0
+m;const gdb_byte *;breakpoint_from_pc;CORE_ADDR *pcptr, int *lenptr;pcptr, lenptr;0;default_breakpoint_from_pc;;0
+
+# Return the breakpoint kind for this target based on *PCPTR.
+m;int;breakpoint_kind_from_pc;CORE_ADDR *pcptr;pcptr;;0;
+
+# Return the software breakpoint from KIND. KIND can have target
+# specific meaning like the Z0 kind parameter.
+# SIZE is set to the software breakpoint's length in memory.
+m;const gdb_byte *;sw_breakpoint_from_kind;int kind, int *size;kind, size;;NULL;;0
+
+# Return the breakpoint kind for this target based on the current
+# processor state (e.g. the current instruction mode on ARM) and the
+# *PCPTR. In default, it is gdbarch->breakpoint_kind_from_pc.
+m;int;breakpoint_kind_from_current_state;struct regcache *regcache, CORE_ADDR *pcptr;regcache, pcptr;0;default_breakpoint_kind_from_current_state;;0
+
+M;CORE_ADDR;adjust_breakpoint_address;CORE_ADDR bpaddr;bpaddr
+m;int;memory_insert_breakpoint;struct bp_target_info *bp_tgt;bp_tgt;0;default_memory_insert_breakpoint;;0
+m;int;memory_remove_breakpoint;struct bp_target_info *bp_tgt;bp_tgt;0;default_memory_remove_breakpoint;;0
+v;CORE_ADDR;decr_pc_after_break;;;0;;;0
# A function can be addressed by either it's "pointer" (possibly a
# descriptor address) or "entry point" (first executable instruction).
# corresponds to the "function pointer" and the function's start
# corresponds to the "function entry point" - and hence is redundant.
-v:CORE_ADDR:deprecated_function_start_offset:::0:::0
+v;CORE_ADDR;deprecated_function_start_offset;;;0;;;0
# Return the remote protocol register number associated with this
# register. Normally the identity mapping.
-m:int:remote_register_number:int regno:regno::default_remote_register_number::0
+m;int;remote_register_number;int regno;regno;;default_remote_register_number;;0
# Fetch the target specific address used to represent a load module.
-F:CORE_ADDR:fetch_tls_load_module_address:struct objfile *objfile:objfile
+F;CORE_ADDR;fetch_tls_load_module_address;struct objfile *objfile;objfile
+
+# Return the thread-local address at OFFSET in the thread-local
+# storage for the thread PTID and the shared library or executable
+# file given by LM_ADDR. If that block of thread-local storage hasn't
+# been allocated yet, this function may throw an error. LM_ADDR may
+# be zero for statically linked multithreaded inferiors.
+
+M;CORE_ADDR;get_thread_local_address;ptid_t ptid, CORE_ADDR lm_addr, CORE_ADDR offset;ptid, lm_addr, offset
#
-v:CORE_ADDR:frame_args_skip:::0:::0
-M:CORE_ADDR:unwind_pc:struct frame_info *next_frame:next_frame
-M:CORE_ADDR:unwind_sp:struct frame_info *next_frame:next_frame
+v;CORE_ADDR;frame_args_skip;;;0;;;0
+m;CORE_ADDR;unwind_pc;struct frame_info *next_frame;next_frame;;default_unwind_pc;;0
+m;CORE_ADDR;unwind_sp;struct frame_info *next_frame;next_frame;;default_unwind_sp;;0
# DEPRECATED_FRAME_LOCALS_ADDRESS as been replaced by the per-frame
# frame-base. Enable frame-base before frame-unwind.
-F:int:frame_num_args:struct frame_info *frame:frame
+F;int;frame_num_args;struct frame_info *frame;frame
#
-M:CORE_ADDR:frame_align:CORE_ADDR address:address
-m:int:stabs_argument_has_addr:struct type *type:type::default_stabs_argument_has_addr::0
-v:int:frame_red_zone_size
+M;CORE_ADDR;frame_align;CORE_ADDR address;address
+m;int;stabs_argument_has_addr;struct type *type;type;;default_stabs_argument_has_addr;;0
+v;int;frame_red_zone_size
#
-m:CORE_ADDR:convert_from_func_ptr_addr:CORE_ADDR addr, struct target_ops *targ:addr, targ::convert_from_func_ptr_addr_identity::0
+m;CORE_ADDR;convert_from_func_ptr_addr;CORE_ADDR addr, struct target_ops *targ;addr, targ;;convert_from_func_ptr_addr_identity;;0
# On some machines there are bits in addresses which are not really
# part of the address, but are used by the kernel, the hardware, etc.
# for special purposes. gdbarch_addr_bits_remove takes out any such bits so
# being a few stray bits in the PC which would mislead us, not as some
# sort of generic thing to handle alignment or segmentation (it's
# possible it should be in TARGET_READ_PC instead).
-m:CORE_ADDR:addr_bits_remove:CORE_ADDR addr:addr::core_addr_identity::0
-# It is not at all clear why gdbarch_smash_text_address is not folded into
-# gdbarch_addr_bits_remove.
-m:CORE_ADDR:smash_text_address:CORE_ADDR addr:addr::core_addr_identity::0
+m;CORE_ADDR;addr_bits_remove;CORE_ADDR addr;addr;;core_addr_identity;;0
+
+# On some machines, not all bits of an address word are significant.
+# For example, on AArch64, the top bits of an address known as the "tag"
+# are ignored by the kernel, the hardware, etc. and can be regarded as
+# additional data associated with the address.
+v;int;significant_addr_bit;;;;;;0
# FIXME/cagney/2001-01-18: This should be split in two. A target method that
# indicates if the target needs software single step. An ISA method to
# implement it.
#
-# FIXME/cagney/2001-01-18: This should be replaced with something that inserts
-# breakpoints using the breakpoint system instead of blatting memory directly
-# (as with rs6000).
-#
# FIXME/cagney/2001-01-18: The logic is backwards. It should be asking if the
# target can single step. If not, then implement single step using breakpoints.
#
-# A return value of 1 means that the software_single_step breakpoints
-# were inserted; 0 means they were not.
-F:int:software_single_step:struct frame_info *frame:frame
+# Return a vector of addresses on which the software single step
+# breakpoints should be inserted. NULL means software single step is
+# not used.
+# Multiple breakpoints may be inserted for some instructions such as
+# conditional branch. However, each implementation must always evaluate
+# the condition and only put the breakpoint at the branch destination if
+# the condition is true, so that we ensure forward progress when stepping
+# past a conditional branch to self.
+F;std::vector<CORE_ADDR>;software_single_step;struct regcache *regcache;regcache
# Return non-zero if the processor is executing a delay slot and a
# further single-step is needed before the instruction finishes.
-M:int:single_step_through_delay:struct frame_info *frame:frame
+M;int;single_step_through_delay;struct frame_info *frame;frame
# FIXME: cagney/2003-08-28: Need to find a better way of selecting the
# disassembler. Perhaps objdump can handle it?
-f:int:print_insn:bfd_vma vma, struct disassemble_info *info:vma, info::0:
-f:CORE_ADDR:skip_trampoline_code:struct frame_info *frame, CORE_ADDR pc:frame, pc::generic_skip_trampoline_code::0
+f;int;print_insn;bfd_vma vma, struct disassemble_info *info;vma, info;;default_print_insn;;0
+f;CORE_ADDR;skip_trampoline_code;struct frame_info *frame, CORE_ADDR pc;frame, pc;;generic_skip_trampoline_code;;0
# If in_solib_dynsym_resolve_code() returns true, and SKIP_SOLIB_RESOLVER
# evaluates non-zero, this is the address where the debugger will place
# a step-resume breakpoint to get us past the dynamic linker.
-m:CORE_ADDR:skip_solib_resolver:CORE_ADDR pc:pc::generic_skip_solib_resolver::0
+m;CORE_ADDR;skip_solib_resolver;CORE_ADDR pc;pc;;generic_skip_solib_resolver;;0
# Some systems also have trampoline code for returning from shared libs.
-m:int:in_solib_return_trampoline:CORE_ADDR pc, const char *name:pc, name::generic_in_solib_return_trampoline::0
+m;int;in_solib_return_trampoline;CORE_ADDR pc, const char *name;pc, name;;generic_in_solib_return_trampoline;;0
+
+# Return true if PC lies inside an indirect branch thunk.
+m;bool;in_indirect_branch_thunk;CORE_ADDR pc;pc;;default_in_indirect_branch_thunk;;0
# A target might have problems with watchpoints as soon as the stack
# frame of the current function has been destroyed. This mostly happens
-# as the first action in a funtion's epilogue. in_function_epilogue_p()
+# as the first action in a function's epilogue. stack_frame_destroyed_p()
# is defined to return a non-zero value if either the given addr is one
# instruction after the stack destroying instruction up to the trailing
# return instruction or if we can figure out that the stack frame has
# already been invalidated regardless of the value of addr. Targets
# which don't suffer from that problem could just let this functionality
# untouched.
-m:int:in_function_epilogue_p:CORE_ADDR addr:addr:0:generic_in_function_epilogue_p::0
-f:void:elf_make_msymbol_special:asymbol *sym, struct minimal_symbol *msym:sym, msym::default_elf_make_msymbol_special::0
-f:void:coff_make_msymbol_special:int val, struct minimal_symbol *msym:val, msym::default_coff_make_msymbol_special::0
-v:int:cannot_step_breakpoint:::0:0::0
-v:int:have_nonsteppable_watchpoint:::0:0::0
-F:int:address_class_type_flags:int byte_size, int dwarf2_addr_class:byte_size, dwarf2_addr_class
-M:const char *:address_class_type_flags_to_name:int type_flags:type_flags
-M:int:address_class_name_to_type_flags:const char *name, int *type_flags_ptr:name, type_flags_ptr
+m;int;stack_frame_destroyed_p;CORE_ADDR addr;addr;0;generic_stack_frame_destroyed_p;;0
+# Process an ELF symbol in the minimal symbol table in a backend-specific
+# way. Normally this hook is supposed to do nothing, however if required,
+# then this hook can be used to apply tranformations to symbols that are
+# considered special in some way. For example the MIPS backend uses it
+# to interpret \`st_other' information to mark compressed code symbols so
+# that they can be treated in the appropriate manner in the processing of
+# the main symbol table and DWARF-2 records.
+F;void;elf_make_msymbol_special;asymbol *sym, struct minimal_symbol *msym;sym, msym
+f;void;coff_make_msymbol_special;int val, struct minimal_symbol *msym;val, msym;;default_coff_make_msymbol_special;;0
+# Process a symbol in the main symbol table in a backend-specific way.
+# Normally this hook is supposed to do nothing, however if required,
+# then this hook can be used to apply tranformations to symbols that
+# are considered special in some way. This is currently used by the
+# MIPS backend to make sure compressed code symbols have the ISA bit
+# set. This in turn is needed for symbol values seen in GDB to match
+# the values used at the runtime by the program itself, for function
+# and label references.
+f;void;make_symbol_special;struct symbol *sym, struct objfile *objfile;sym, objfile;;default_make_symbol_special;;0
+# Adjust the address retrieved from a DWARF-2 record other than a line
+# entry in a backend-specific way. Normally this hook is supposed to
+# return the address passed unchanged, however if that is incorrect for
+# any reason, then this hook can be used to fix the address up in the
+# required manner. This is currently used by the MIPS backend to make
+# sure addresses in FDE, range records, etc. referring to compressed
+# code have the ISA bit set, matching line information and the symbol
+# table.
+f;CORE_ADDR;adjust_dwarf2_addr;CORE_ADDR pc;pc;;default_adjust_dwarf2_addr;;0
+# Adjust the address updated by a line entry in a backend-specific way.
+# Normally this hook is supposed to return the address passed unchanged,
+# however in the case of inconsistencies in these records, this hook can
+# be used to fix them up in the required manner. This is currently used
+# by the MIPS backend to make sure all line addresses in compressed code
+# are presented with the ISA bit set, which is not always the case. This
+# in turn ensures breakpoint addresses are correctly matched against the
+# stop PC.
+f;CORE_ADDR;adjust_dwarf2_line;CORE_ADDR addr, int rel;addr, rel;;default_adjust_dwarf2_line;;0
+v;int;cannot_step_breakpoint;;;0;0;;0
+# See comment in target.h about continuable, steppable and
+# non-steppable watchpoints.
+v;int;have_nonsteppable_watchpoint;;;0;0;;0
+F;int;address_class_type_flags;int byte_size, int dwarf2_addr_class;byte_size, dwarf2_addr_class
+M;const char *;address_class_type_flags_to_name;int type_flags;type_flags
+# Execute vendor-specific DWARF Call Frame Instruction. OP is the instruction.
+# FS are passed from the generic execute_cfa_program function.
+m;bool;execute_dwarf_cfa_vendor_op;gdb_byte op, struct dwarf2_frame_state *fs;op, fs;;default_execute_dwarf_cfa_vendor_op;;0
+
+# Return the appropriate type_flags for the supplied address class.
+# This function should return 1 if the address class was recognized and
+# type_flags was set, zero otherwise.
+M;int;address_class_name_to_type_flags;const char *name, int *type_flags_ptr;name, type_flags_ptr
# Is a register in a group
-m:int:register_reggroup_p:int regnum, struct reggroup *reggroup:regnum, reggroup::default_register_reggroup_p::0
+m;int;register_reggroup_p;int regnum, struct reggroup *reggroup;regnum, reggroup;;default_register_reggroup_p;;0
# Fetch the pointer to the ith function argument.
-F:CORE_ADDR:fetch_pointer_argument:struct frame_info *frame, int argi, struct type *type:frame, argi, type
-
-# Return the appropriate register set for a core file section with
-# name SECT_NAME and size SECT_SIZE.
-M:const struct regset *:regset_from_core_section:const char *sect_name, size_t sect_size:sect_name, sect_size
+F;CORE_ADDR;fetch_pointer_argument;struct frame_info *frame, int argi, struct type *type;frame, argi, type
-# Supported register notes in a core file.
-v:struct core_regset_section *:core_regset_sections:const char *name, int len::::::host_address_to_string (gdbarch->core_regset_sections)
+# Iterate over all supported register notes in a core file. For each
+# supported register note section, the iterator must call CB and pass
+# CB_DATA unchanged. If REGCACHE is not NULL, the iterator can limit
+# the supported register note sections based on the current register
+# values. Otherwise it should enumerate all supported register note
+# sections.
+M;void;iterate_over_regset_sections;iterate_over_regset_sections_cb *cb, void *cb_data, const struct regcache *regcache;cb, cb_data, regcache
# Create core file notes
-M:char *:make_corefile_notes:bfd *obfd, int *note_size:obfd, note_size
+M;char *;make_corefile_notes;bfd *obfd, int *note_size;obfd, note_size
# Find core file memory regions
-M:int:find_memory_regions:find_memory_region_ftype func, void *data:func, data
+M;int;find_memory_regions;find_memory_region_ftype func, void *data;func, data
# Read offset OFFSET of TARGET_OBJECT_LIBRARIES formatted shared libraries list from
-# core file into buffer READBUF with length LEN.
-M:LONGEST:core_xfer_shared_libraries:gdb_byte *readbuf, ULONGEST offset, LONGEST len:readbuf, offset, len
+# core file into buffer READBUF with length LEN. Return the number of bytes read
+# (zero indicates failure).
+# failed, otherwise, return the red length of READBUF.
+M;ULONGEST;core_xfer_shared_libraries;gdb_byte *readbuf, ULONGEST offset, ULONGEST len;readbuf, offset, len
+
+# Read offset OFFSET of TARGET_OBJECT_LIBRARIES_AIX formatted shared
+# libraries list from core file into buffer READBUF with length LEN.
+# Return the number of bytes read (zero indicates failure).
+M;ULONGEST;core_xfer_shared_libraries_aix;gdb_byte *readbuf, ULONGEST offset, ULONGEST len;readbuf, offset, len
# How the core target converts a PTID from a core file to a string.
-M:char *:core_pid_to_str:ptid_t ptid:ptid
+M;std::string;core_pid_to_str;ptid_t ptid;ptid
+
+# How the core target extracts the name of a thread from a core file.
+M;const char *;core_thread_name;struct thread_info *thr;thr
+
+# Read offset OFFSET of TARGET_OBJECT_SIGNAL_INFO signal information
+# from core file into buffer READBUF with length LEN. Return the number
+# of bytes read (zero indicates EOF, a negative value indicates failure).
+M;LONGEST;core_xfer_siginfo;gdb_byte *readbuf, ULONGEST offset, ULONGEST len; readbuf, offset, len
# BFD target to use when generating a core file.
-V:const char *:gcore_bfd_target:::0:0:::pstring (gdbarch->gcore_bfd_target)
+V;const char *;gcore_bfd_target;;;0;0;;;pstring (gdbarch->gcore_bfd_target)
# If the elements of C++ vtables are in-place function descriptors rather
# than normal function pointers (which may point to code or a descriptor),
# set this to one.
-v:int:vtable_function_descriptors:::0:0::0
+v;int;vtable_function_descriptors;;;0;0;;0
# Set if the least significant bit of the delta is used instead of the least
# significant bit of the pfn for pointers to virtual member functions.
-v:int:vbit_in_delta:::0:0::0
+v;int;vbit_in_delta;;;0;0;;0
# Advance PC to next instruction in order to skip a permanent breakpoint.
-F:void:skip_permanent_breakpoint:struct regcache *regcache:regcache
+f;void;skip_permanent_breakpoint;struct regcache *regcache;regcache;default_skip_permanent_breakpoint;default_skip_permanent_breakpoint;;0
# The maximum length of an instruction on this architecture in bytes.
-V:ULONGEST:max_insn_length:::0:0
+V;ULONGEST;max_insn_length;;;0;0
# Copy the instruction at FROM to TO, and make any adjustments
# necessary to single-step it at that address.
# If you do not provide this function, GDB assumes that the
# architecture does not support displaced stepping.
#
-# If your architecture doesn't need to adjust instructions before
-# single-stepping them, consider using simple_displaced_step_copy_insn
-# here.
-M:struct displaced_step_closure *:displaced_step_copy_insn:CORE_ADDR from, CORE_ADDR to, struct regcache *regs:from, to, regs
+# If the instruction cannot execute out of line, return NULL. The
+# core falls back to stepping past the instruction in-line instead in
+# that case.
+M;displaced_step_copy_insn_closure_up;displaced_step_copy_insn;CORE_ADDR from, CORE_ADDR to, struct regcache *regs;from, to, regs
# Return true if GDB should use hardware single-stepping to execute
# the displaced instruction identified by CLOSURE. If false,
#
# The default implementation returns false on all targets that
# provide a gdbarch_software_single_step routine, and true otherwise.
-m:int:displaced_step_hw_singlestep:struct displaced_step_closure *closure:closure::default_displaced_step_hw_singlestep::0
+m;int;displaced_step_hw_singlestep;struct displaced_step_copy_insn_closure *closure;closure;;default_displaced_step_hw_singlestep;;0
# Fix up the state resulting from successfully single-stepping a
# displaced instruction, to give the result we would have gotten from
#
# For a general explanation of displaced stepping and how GDB uses it,
# see the comments in infrun.c.
-M:void:displaced_step_fixup:struct displaced_step_closure *closure, CORE_ADDR from, CORE_ADDR to, struct regcache *regs:closure, from, to, regs::NULL
-
-# Free a closure returned by gdbarch_displaced_step_copy_insn.
-#
-# If you provide gdbarch_displaced_step_copy_insn, you must provide
-# this function as well.
-#
-# If your architecture uses closures that don't need to be freed, then
-# you can use simple_displaced_step_free_closure here.
-#
-# For a general explanation of displaced stepping and how GDB uses it,
-# see the comments in infrun.c.
-m:void:displaced_step_free_closure:struct displaced_step_closure *closure:closure::NULL::(! gdbarch->displaced_step_free_closure) != (! gdbarch->displaced_step_copy_insn)
+M;void;displaced_step_fixup;struct displaced_step_copy_insn_closure *closure, CORE_ADDR from, CORE_ADDR to, struct regcache *regs;closure, from, to, regs;;NULL
# Return the address of an appropriate place to put displaced
# instructions while we step over them. There need only be one such
#
# For a general explanation of displaced stepping and how GDB uses it,
# see the comments in infrun.c.
-m:CORE_ADDR:displaced_step_location:void:::NULL::(! gdbarch->displaced_step_location) != (! gdbarch->displaced_step_copy_insn)
+#m;CORE_ADDR;displaced_step_location;thread_info *;thread;;NULL;;(! gdbarch->displaced_step_location) != (! gdbarch->displaced_step_copy_insn)
+#m;CORE_ADDR;displaced_step_release_location;CORE_ADDR;addr;;NULL;;(! gdbarch->displaced_step_location) != (! gdbarch->displaced_step_copy_insn)
+M;displaced_step_prepare_status;displaced_step_prepare;thread_info *thread;thread
+m;displaced_step_finish_status;displaced_step_finish;thread_info *thread, gdb_signal sig;thread, sig;;NULL;;(! gdbarch->displaced_step_finish) != (! gdbarch->displaced_step_prepare)
# Relocate an instruction to execute at a different address. OLDLOC
# is the address in the inferior memory where the instruction to
# should be adjusted to return to the instruction after OLDLOC;
# relative branches, and other PC-relative instructions need the
# offset adjusted; etc.
-M:void:relocate_instruction:CORE_ADDR *to, CORE_ADDR from:to, from::NULL
+M;void;relocate_instruction;CORE_ADDR *to, CORE_ADDR from;to, from;;NULL
# Refresh overlay mapped state for section OSECT.
-F:void:overlay_update:struct obj_section *osect:osect
+F;void;overlay_update;struct obj_section *osect;osect
-M:const struct target_desc *:core_read_description:struct target_ops *target, bfd *abfd:target, abfd
+M;const struct target_desc *;core_read_description;struct target_ops *target, bfd *abfd;target, abfd
# Handle special encoding of static variables in stabs debug info.
-F:const char *:static_transform_name:const char *name:name
+F;const char *;static_transform_name;const char *name;name
# Set if the address in N_SO or N_FUN stabs may be zero.
-v:int:sofun_address_maybe_missing:::0:0::0
+v;int;sofun_address_maybe_missing;;;0;0;;0
# Parse the instruction at ADDR storing in the record execution log
# the registers REGCACHE and memory ranges that will be affected when
# the instruction executes, along with their current values.
# Return -1 if something goes wrong, 0 otherwise.
-M:int:process_record:struct regcache *regcache, CORE_ADDR addr:regcache, addr
+M;int;process_record;struct regcache *regcache, CORE_ADDR addr;regcache, addr
# Save process state after a signal.
# Return -1 if something goes wrong, 0 otherwise.
-M:int:process_record_signal:struct regcache *regcache, enum gdb_signal signal:regcache, signal
+M;int;process_record_signal;struct regcache *regcache, enum gdb_signal signal;regcache, signal
# Signal translation: translate inferior's signal (target's) number
-# into GDB's representation. This is mainly used when cross-debugging
-# core files --- "Live" targets hide the translation behind the target
-# interface (target_wait, target_resume, etc.). The default is to do
-# the translation using host signal numbers.
-m:enum gdb_signal:gdb_signal_from_target:int signo:signo::default_gdb_signal_from_target::0
+# into GDB's representation. The implementation of this method must
+# be host independent. IOW, don't rely on symbols of the NAT_FILE
+# header (the nm-*.h files), the host <signal.h> header, or similar
+# headers. This is mainly used when cross-debugging core files ---
+# "Live" targets hide the translation behind the target interface
+# (target_wait, target_resume, etc.).
+M;enum gdb_signal;gdb_signal_from_target;int signo;signo
+
+# Signal translation: translate the GDB's internal signal number into
+# the inferior's signal (target's) representation. The implementation
+# of this method must be host independent. IOW, don't rely on symbols
+# of the NAT_FILE header (the nm-*.h files), the host <signal.h>
+# header, or similar headers.
+# Return the target signal number if found, or -1 if the GDB internal
+# signal number is invalid.
+M;int;gdb_signal_to_target;enum gdb_signal signal;signal
# Extra signal info inspection.
#
# Return a type suitable to inspect extra signal information.
-M:struct type *:get_siginfo_type:void:
+M;struct type *;get_siginfo_type;void;
# Record architecture-specific information from the symbol table.
-M:void:record_special_symbol:struct objfile *objfile, asymbol *sym:objfile, sym
+M;void;record_special_symbol;struct objfile *objfile, asymbol *sym;objfile, sym
# Function for the 'catch syscall' feature.
# Get architecture-specific system calls information from registers.
-M:LONGEST:get_syscall_number:ptid_t ptid:ptid
+M;LONGEST;get_syscall_number;thread_info *thread;thread
+
+# The filename of the XML syscall for this architecture.
+v;const char *;xml_syscall_file;;;0;0;;0;pstring (gdbarch->xml_syscall_file)
+
+# Information about system calls from this architecture
+v;struct syscalls_info *;syscalls_info;;;0;0;;0;host_address_to_string (gdbarch->syscalls_info)
# SystemTap related fields and functions.
-# Prefix used to mark an integer constant on the architecture's assembly
+# A NULL-terminated array of prefixes used to mark an integer constant
+# on the architecture's assembly.
# For example, on x86 integer constants are written as:
#
# \$10 ;; integer constant 10
#
# in this case, this prefix would be the character \`\$\'.
-v:const char *:stap_integer_prefix:::0:0::0:gdbarch->stap_integer_prefix
+v;const char *const *;stap_integer_prefixes;;;0;0;;0;pstring_list (gdbarch->stap_integer_prefixes)
-# Suffix used to mark an integer constant on the architecture's assembly.
-v:const char *:stap_integer_suffix:::0:0::0:gdbarch->stap_integer_suffix
+# A NULL-terminated array of suffixes used to mark an integer constant
+# on the architecture's assembly.
+v;const char *const *;stap_integer_suffixes;;;0;0;;0;pstring_list (gdbarch->stap_integer_suffixes)
-# Prefix used to mark a register name on the architecture's assembly.
+# A NULL-terminated array of prefixes used to mark a register name on
+# the architecture's assembly.
# For example, on x86 the register name is written as:
#
# \%eax ;; register eax
#
# in this case, this prefix would be the character \`\%\'.
-v:const char *:stap_register_prefix:::0:0::0:gdbarch->stap_register_prefix
+v;const char *const *;stap_register_prefixes;;;0;0;;0;pstring_list (gdbarch->stap_register_prefixes)
-# Suffix used to mark a register name on the architecture's assembly
-v:const char *:stap_register_suffix:::0:0::0:gdbarch->stap_register_suffix
+# A NULL-terminated array of suffixes used to mark a register name on
+# the architecture's assembly.
+v;const char *const *;stap_register_suffixes;;;0;0;;0;pstring_list (gdbarch->stap_register_suffixes)
-# Prefix used to mark a register indirection on the architecture's assembly.
+# A NULL-terminated array of prefixes used to mark a register
+# indirection on the architecture's assembly.
# For example, on x86 the register indirection is written as:
#
# \(\%eax\) ;; indirecting eax
#
# Please note that we use the indirection prefix also for register
# displacement, e.g., \`4\(\%eax\)\' on x86.
-v:const char *:stap_register_indirection_prefix:::0:0::0:gdbarch->stap_register_indirection_prefix
+v;const char *const *;stap_register_indirection_prefixes;;;0;0;;0;pstring_list (gdbarch->stap_register_indirection_prefixes)
-# Suffix used to mark a register indirection on the architecture's assembly.
+# A NULL-terminated array of suffixes used to mark a register
+# indirection on the architecture's assembly.
# For example, on x86 the register indirection is written as:
#
# \(\%eax\) ;; indirecting eax
#
# Please note that we use the indirection suffix also for register
# displacement, e.g., \`4\(\%eax\)\' on x86.
-v:const char *:stap_register_indirection_suffix:::0:0::0:gdbarch->stap_register_indirection_suffix
+v;const char *const *;stap_register_indirection_suffixes;;;0;0;;0;pstring_list (gdbarch->stap_register_indirection_suffixes)
-# Prefix used to name a register using GDB's nomenclature.
+# Prefix(es) used to name a register using GDB's nomenclature.
#
# For example, on PPC a register is represented by a number in the assembly
# language (e.g., \`10\' is the 10th general-purpose register). However,
# inside GDB this same register has an \`r\' appended to its name, so the 10th
# register would be represented as \`r10\' internally.
-v:const char *:stap_gdb_register_prefix:::0:0::0:gdbarch->stap_gdb_register_prefix
+v;const char *;stap_gdb_register_prefix;;;0;0;;0;pstring (gdbarch->stap_gdb_register_prefix)
# Suffix used to name a register using GDB's nomenclature.
-v:const char *:stap_gdb_register_suffix:::0:0::0:gdbarch->stap_gdb_register_suffix
+v;const char *;stap_gdb_register_suffix;;;0;0;;0;pstring (gdbarch->stap_gdb_register_suffix)
# Check if S is a single operand.
#
# and return 1 if some were found, or zero otherwise. Please try to match
# as much info as you can from the string, i.e., if you have to match
# something like \`\(\%\', do not match just the \`\(\'.
-M:int:stap_is_single_operand:const char *s:s
+M;int;stap_is_single_operand;const char *s;s
# Function used to handle a "special case" in the parser.
#
# if the token was not recognized as a special token (in this case, returning
# zero means that the special parser is deferring the parsing to the generic
# parser), and should advance the buffer pointer (p->arg).
-M:int:stap_parse_special_token:struct stap_parse_info *p:p
+M;int;stap_parse_special_token;struct stap_parse_info *p;p
+
+# Perform arch-dependent adjustments to a register name.
+#
+# In very specific situations, it may be necessary for the register
+# name present in a SystemTap probe's argument to be handled in a
+# special way. For example, on i386, GCC may over-optimize the
+# register allocation and use smaller registers than necessary. In
+# such cases, the client that is reading and evaluating the SystemTap
+# probe (ourselves) will need to actually fetch values from the wider
+# version of the register in question.
+#
+# To illustrate the example, consider the following probe argument
+# (i386):
+#
+# 4@%ax
+#
+# This argument says that its value can be found at the %ax register,
+# which is a 16-bit register. However, the argument's prefix says
+# that its type is "uint32_t", which is 32-bit in size. Therefore, in
+# this case, GDB should actually fetch the probe's value from register
+# %eax, not %ax. In this scenario, this function would actually
+# replace the register name from %ax to %eax.
+#
+# The rationale for this can be found at PR breakpoints/24541.
+M;std::string;stap_adjust_register;struct stap_parse_info *p, const std::string \®name, int regnum;p, regname, regnum
+
+# DTrace related functions.
+
+# The expression to compute the NARTGth+1 argument to a DTrace USDT probe.
+# NARG must be >= 0.
+M;void;dtrace_parse_probe_argument;struct expr_builder *builder, int narg;builder, narg
+
+# True if the given ADDR does not contain the instruction sequence
+# corresponding to a disabled DTrace is-enabled probe.
+M;int;dtrace_probe_is_enabled;CORE_ADDR addr;addr
+
+# Enable a DTrace is-enabled probe at ADDR.
+M;void;dtrace_enable_probe;CORE_ADDR addr;addr
+# Disable a DTrace is-enabled probe at ADDR.
+M;void;dtrace_disable_probe;CORE_ADDR addr;addr
# True if the list of shared libraries is one and only for all
# processes, as opposed to a list of shared libraries per inferior.
# This usually means that all processes, although may or may not share
# an address space, will see the same set of symbols at the same
# addresses.
-v:int:has_global_solist:::0:0::0
+v;int;has_global_solist;;;0;0;;0
# On some targets, even though each inferior has its own private
# address space, the debug interface takes care of making breakpoints
# visible to all address spaces automatically. For such cases,
# this property should be set to true.
-v:int:has_global_breakpoints:::0:0::0
+v;int;has_global_breakpoints;;;0;0;;0
# True if inferiors share an address space (e.g., uClinux).
-m:int:has_shared_address_space:void:::default_has_shared_address_space::0
+m;int;has_shared_address_space;void;;;default_has_shared_address_space;;0
# True if a fast tracepoint can be set at an address.
-m:int:fast_tracepoint_valid_at:CORE_ADDR addr, int *isize, char **msg:addr, isize, msg::default_fast_tracepoint_valid_at::0
+m;int;fast_tracepoint_valid_at;CORE_ADDR addr, std::string *msg;addr, msg;;default_fast_tracepoint_valid_at;;0
+
+# Guess register state based on tracepoint location. Used for tracepoints
+# where no registers have been collected, but there's only one location,
+# allowing us to guess the PC value, and perhaps some other registers.
+# On entry, regcache has all registers marked as unavailable.
+m;void;guess_tracepoint_registers;struct regcache *regcache, CORE_ADDR addr;regcache, addr;;default_guess_tracepoint_registers;;0
# Return the "auto" target charset.
-f:const char *:auto_charset:void::default_auto_charset:default_auto_charset::0
+f;const char *;auto_charset;void;;default_auto_charset;default_auto_charset;;0
# Return the "auto" target wide charset.
-f:const char *:auto_wide_charset:void::default_auto_wide_charset:default_auto_wide_charset::0
+f;const char *;auto_wide_charset;void;;default_auto_wide_charset;default_auto_wide_charset;;0
# If non-empty, this is a file extension that will be opened in place
# of the file extension reported by the shared library list.
# This is most useful for toolchains that use a post-linker tool,
# where the names of the files run on the target differ in extension
# compared to the names of the files GDB should load for debug info.
-v:const char *:solib_symbols_extension:::::::pstring (gdbarch->solib_symbols_extension)
+v;const char *;solib_symbols_extension;;;;;;;pstring (gdbarch->solib_symbols_extension)
# If true, the target OS has DOS-based file system semantics. That
# is, absolute paths include a drive name, and the backslash is
# considered a directory separator.
-v:int:has_dos_based_file_system:::0:0::0
+v;int;has_dos_based_file_system;;;0;0;;0
# Generate bytecodes to collect the return address in a frame.
# Since the bytecodes run on the target, possibly with GDB not even
# connected, the full unwinding machinery is not available, and
# typically this function will issue bytecodes for one or more likely
# places that the return address may be found.
-m:void:gen_return_address:struct agent_expr *ax, struct axs_value *value, CORE_ADDR scope:ax, value, scope::default_gen_return_address::0
+m;void;gen_return_address;struct agent_expr *ax, struct axs_value *value, CORE_ADDR scope;ax, value, scope;;default_gen_return_address;;0
# Implement the "info proc" command.
-M:void:info_proc:char *args, enum info_proc_what what:args, what
+M;void;info_proc;const char *args, enum info_proc_what what;args, what
+
+# Implement the "info proc" command for core files. Noe that there
+# are two "info_proc"-like methods on gdbarch -- one for core files,
+# one for live targets.
+M;void;core_info_proc;const char *args, enum info_proc_what what;args, what
+
+# Iterate over all objfiles in the order that makes the most sense
+# for the architecture to make global symbol searches.
+#
+# CB is a callback function where OBJFILE is the objfile to be searched,
+# and CB_DATA a pointer to user-defined data (the same data that is passed
+# when calling this gdbarch method). The iteration stops if this function
+# returns nonzero.
+#
+# CB_DATA is a pointer to some user-defined data to be passed to
+# the callback.
+#
+# If not NULL, CURRENT_OBJFILE corresponds to the objfile being
+# inspected when the symbol search was requested.
+m;void;iterate_over_objfiles_in_search_order;iterate_over_objfiles_in_search_order_cb_ftype *cb, void *cb_data, struct objfile *current_objfile;cb, cb_data, current_objfile;0;default_iterate_over_objfiles_in_search_order;;0
+
+# Ravenscar arch-dependent ops.
+v;struct ravenscar_arch_ops *;ravenscar_ops;;;NULL;NULL;;0;host_address_to_string (gdbarch->ravenscar_ops)
+
+# Return non-zero if the instruction at ADDR is a call; zero otherwise.
+m;int;insn_is_call;CORE_ADDR addr;addr;;default_insn_is_call;;0
+
+# Return non-zero if the instruction at ADDR is a return; zero otherwise.
+m;int;insn_is_ret;CORE_ADDR addr;addr;;default_insn_is_ret;;0
+
+# Return non-zero if the instruction at ADDR is a jump; zero otherwise.
+m;int;insn_is_jump;CORE_ADDR addr;addr;;default_insn_is_jump;;0
+
+# Return true if there's a program/permanent breakpoint planted in
+# memory at ADDRESS, return false otherwise.
+m;bool;program_breakpoint_here_p;CORE_ADDR address;address;;default_program_breakpoint_here_p;;0
+
+# Read one auxv entry from *READPTR, not reading locations >= ENDPTR.
+# Return 0 if *READPTR is already at the end of the buffer.
+# Return -1 if there is insufficient buffer for a whole entry.
+# Return 1 if an entry was read into *TYPEP and *VALP.
+M;int;auxv_parse;gdb_byte **readptr, gdb_byte *endptr, CORE_ADDR *typep, CORE_ADDR *valp;readptr, endptr, typep, valp
+
+# Print the description of a single auxv entry described by TYPE and VAL
+# to FILE.
+m;void;print_auxv_entry;struct ui_file *file, CORE_ADDR type, CORE_ADDR val;file, type, val;;default_print_auxv_entry;;0
+
+# Find the address range of the current inferior's vsyscall/vDSO, and
+# write it to *RANGE. If the vsyscall's length can't be determined, a
+# range with zero length is returned. Returns true if the vsyscall is
+# found, false otherwise.
+m;int;vsyscall_range;struct mem_range *range;range;;default_vsyscall_range;;0
+
+# Allocate SIZE bytes of PROT protected page aligned memory in inferior.
+# PROT has GDB_MMAP_PROT_* bitmask format.
+# Throw an error if it is not possible. Returned address is always valid.
+f;CORE_ADDR;infcall_mmap;CORE_ADDR size, unsigned prot;size, prot;;default_infcall_mmap;;0
+
+# Deallocate SIZE bytes of memory at ADDR in inferior from gdbarch_infcall_mmap.
+# Print a warning if it is not possible.
+f;void;infcall_munmap;CORE_ADDR addr, CORE_ADDR size;addr, size;;default_infcall_munmap;;0
+
+# Return string (caller has to use xfree for it) with options for GCC
+# to produce code for this target, typically "-m64", "-m32" or "-m31".
+# These options are put before CU's DW_AT_producer compilation options so that
+# they can override it.
+m;std::string;gcc_target_options;void;;;default_gcc_target_options;;0
+
+# Return a regular expression that matches names used by this
+# architecture in GNU configury triplets. The result is statically
+# allocated and must not be freed. The default implementation simply
+# returns the BFD architecture name, which is correct in nearly every
+# case.
+m;const char *;gnu_triplet_regexp;void;;;default_gnu_triplet_regexp;;0
+
+# Return the size in 8-bit bytes of an addressable memory unit on this
+# architecture. This corresponds to the number of 8-bit bytes associated to
+# each address in memory.
+m;int;addressable_memory_unit_size;void;;;default_addressable_memory_unit_size;;0
+
+# Functions for allowing a target to modify its disassembler options.
+v;const char *;disassembler_options_implicit;;;0;0;;0;pstring (gdbarch->disassembler_options_implicit)
+v;char **;disassembler_options;;;0;0;;0;pstring_ptr (gdbarch->disassembler_options)
+v;const disasm_options_and_args_t *;valid_disassembler_options;;;0;0;;0;host_address_to_string (gdbarch->valid_disassembler_options)
+
+# Type alignment override method. Return the architecture specific
+# alignment required for TYPE. If there is no special handling
+# required for TYPE then return the value 0, GDB will then apply the
+# default rules as laid out in gdbtypes.c:type_align.
+m;ULONGEST;type_align;struct type *type;type;;default_type_align;;0
+
+# Return a string containing any flags for the given PC in the given FRAME.
+f;std::string;get_pc_address_flags;frame_info *frame, CORE_ADDR pc;frame, pc;;default_get_pc_address_flags;;0
EOF
}
#
# The .log file
#
-exec > new-gdbarch.log
+exec > gdbarch.log
function_list | while do_read
do
cat <<EOF
-${class} ${returntype} ${function} ($formal)
+${class} ${returntype:-} ${function} (${formal:-})
EOF
for r in ${read}
do
- eval echo \"\ \ \ \ ${r}=\${${r}}\"
+ eval echo "\" ${r}=\${${r}}\""
done
if class_is_predicate_p && fallback_default_p
then
kill $$
exit 1
fi
- if [ "x${invalid_p}" = "x0" -a -n "${postdefault}" ]
+ if [ "x${invalid_p}" = "x0" ] && [ -n "${postdefault}" ]
then
echo "Error: postdefault is useless when invalid_p=0" 1>&2
kill $$
done
exec 1>&2
-compare_new gdbarch.log
copyright ()
{
cat <<EOF
-/* *INDENT-OFF* */ /* THIS FILE IS GENERATED */
+/* *INDENT-OFF* */ /* THIS FILE IS GENERATED -*- buffer-read-only: t -*- */
+/* vi:set ro: */
/* Dynamic architecture support for GDB, the GNU debugger.
- Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
- 2007, 2008, 2009 Free Software Foundation, Inc.
+ Copyright (C) 1998-2020 Free Software Foundation, Inc.
This file is part of GDB.
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
-
+
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
+
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
-/* This file was created with the aid of \`\`gdbarch.sh''.
-
- The Bourne shell script \`\`gdbarch.sh'' creates the files
- \`\`new-gdbarch.c'' and \`\`new-gdbarch.h and then compares them
- against the existing \`\`gdbarch.[hc]''. Any differences found
- being reported.
-
- If editing this file, please also run gdbarch.sh and merge any
- changes into that script. Conversely, when making sweeping changes
- to this file, modifying gdbarch.sh and using its output may prove
- easier. */
+/* This file was created with the aid of \`\`gdbarch.sh''. */
EOF
}
#ifndef GDBARCH_H
#define GDBARCH_H
+#include <vector>
+#include "frame.h"
+#include "dis-asm.h"
+#include "gdb_obstack.h"
+#include "infrun.h"
+#include "osabi.h"
+#include "displaced-stepping.h"
+
struct floatformat;
struct ui_file;
-struct frame_info;
struct value;
struct objfile;
struct obj_section;
struct obstack;
struct bp_target_info;
struct target_desc;
-struct displaced_step_closure;
-struct core_regset_section;
+struct symbol;
struct syscall;
struct agent_expr;
struct axs_value;
struct stap_parse_info;
+struct expr_builder;
+struct ravenscar_arch_ops;
+struct mem_range;
+struct syscalls_info;
+struct thread_info;
+struct ui_out;
+
+#include "regcache.h"
+
+/* The architecture associated with the inferior through the
+ connection to the target.
+
+ The architecture vector provides some information that is really a
+ property of the inferior, accessed through a particular target:
+ ptrace operations; the layout of certain RSP packets; the solib_ops
+ vector; etc. To differentiate architecture accesses to
+ per-inferior/target properties from
+ per-thread/per-frame/per-objfile properties, accesses to
+ per-inferior/target properties should be made through this
+ gdbarch. */
+
+/* This is a convenience wrapper for 'current_inferior ()->gdbarch'. */
+extern struct gdbarch *target_gdbarch (void);
+
+/* Callback type for the 'iterate_over_objfiles_in_search_order'
+ gdbarch method. */
+
+typedef int (iterate_over_objfiles_in_search_order_cb_ftype)
+ (struct objfile *objfile, void *cb_data);
+
+/* Callback type for regset section iterators. The callback usually
+ invokes the REGSET's supply or collect method, to which it must
+ pass a buffer - for collects this buffer will need to be created using
+ COLLECT_SIZE, for supply the existing buffer being read from should
+ be at least SUPPLY_SIZE. SECT_NAME is a BFD section name, and HUMAN_NAME
+ is used for diagnostic messages. CB_DATA should have been passed
+ unchanged through the iterator. */
+
+typedef void (iterate_over_regset_sections_cb)
+ (const char *sect_name, int supply_size, int collect_size,
+ const struct regset *regset, const char *human_name, void *cb_data);
+
+/* For a function call, does the function return a value using a
+ normal value return or a structure return - passing a hidden
+ argument pointing to storage. For the latter, there are two
+ cases: language-mandated structure return and target ABI
+ structure return. */
+
+enum function_call_return_method
+{
+ /* Standard value return. */
+ return_method_normal = 0,
+
+ /* Language ABI structure return. This is handled
+ by passing the return location as the first parameter to
+ the function, even preceding "this". */
+ return_method_hidden_param,
+
+ /* Target ABI struct return. This is target-specific; for instance,
+ on ia64 the first argument is passed in out0 but the hidden
+ structure return pointer would normally be passed in r8. */
+ return_method_struct,
+};
-/* The architecture associated with the connection to the target.
-
- The architecture vector provides some information that is really
- a property of the target: The layout of certain packets, for instance;
- or the solib_ops vector. Etc. To differentiate architecture accesses
- to per-target properties from per-thread/per-frame/per-objfile properties,
- accesses to per-target properties should be made through target_gdbarch.
-
- Eventually, when support for multiple targets is implemented in
- GDB, this global should be made target-specific. */
-extern struct gdbarch *target_gdbarch;
EOF
# function typedef's
if class_is_info_p
then
printf "\n"
- printf "extern ${returntype} gdbarch_${function} (struct gdbarch *gdbarch);\n"
- printf "/* set_gdbarch_${function}() - not applicable - pre-initialized. */\n"
+ printf "extern %s gdbarch_%s (struct gdbarch *gdbarch);\n" "$returntype" "$function"
+ printf "/* set_gdbarch_%s() - not applicable - pre-initialized. */\n" "$function"
fi
done
if class_is_predicate_p
then
printf "\n"
- printf "extern int gdbarch_${function}_p (struct gdbarch *gdbarch);\n"
+ printf "extern int gdbarch_%s_p (struct gdbarch *gdbarch);\n" "$function"
fi
if class_is_variable_p
then
printf "\n"
- printf "extern ${returntype} gdbarch_${function} (struct gdbarch *gdbarch);\n"
- printf "extern void set_gdbarch_${function} (struct gdbarch *gdbarch, ${returntype} ${function});\n"
+ printf "extern %s gdbarch_%s (struct gdbarch *gdbarch);\n" "$returntype" "$function"
+ printf "extern void set_gdbarch_%s (struct gdbarch *gdbarch, %s %s);\n" "$function" "$returntype" "$function"
fi
if class_is_function_p
then
printf "\n"
if [ "x${formal}" = "xvoid" ] && class_is_multiarch_p
then
- printf "typedef ${returntype} (gdbarch_${function}_ftype) (struct gdbarch *gdbarch);\n"
+ printf "typedef %s (gdbarch_%s_ftype) (struct gdbarch *gdbarch);\n" "$returntype" "$function"
elif class_is_multiarch_p
then
- printf "typedef ${returntype} (gdbarch_${function}_ftype) (struct gdbarch *gdbarch, ${formal});\n"
+ printf "typedef %s (gdbarch_%s_ftype) (struct gdbarch *gdbarch, %s);\n" "$returntype" "$function" "$formal"
else
- printf "typedef ${returntype} (gdbarch_${function}_ftype) (${formal});\n"
+ printf "typedef %s (gdbarch_%s_ftype) (%s);\n" "$returntype" "$function" "$formal"
fi
if [ "x${formal}" = "xvoid" ]
then
- printf "extern ${returntype} gdbarch_${function} (struct gdbarch *gdbarch);\n"
+ printf "extern %s gdbarch_%s (struct gdbarch *gdbarch);\n" "$returntype" "$function"
else
- printf "extern ${returntype} gdbarch_${function} (struct gdbarch *gdbarch, ${formal});\n"
+ printf "extern %s gdbarch_%s (struct gdbarch *gdbarch, %s);\n" "$returntype" "$function" "$formal"
fi
- printf "extern void set_gdbarch_${function} (struct gdbarch *gdbarch, gdbarch_${function}_ftype *${function});\n"
+ printf "extern void set_gdbarch_%s (struct gdbarch *gdbarch, gdbarch_%s_ftype *%s);\n" "$function" "$function" "$function"
fi
done
# close it off
cat <<EOF
-/* Definition for an unknown syscall, used basically in error-cases. */
-#define UNKNOWN_SYSCALL (-1)
-
extern struct gdbarch_tdep *gdbarch_tdep (struct gdbarch *gdbarch);
const struct bfd_arch_info *bfd_arch_info;
/* Use default: BFD_ENDIAN_UNKNOWN (NB: is not ZERO). */
- int byte_order;
+ enum bfd_endian byte_order;
- int byte_order_for_code;
+ enum bfd_endian byte_order_for_code;
/* Use default: NULL (ZERO). */
bfd *abfd;
/* Use default: NULL (ZERO). */
- struct gdbarch_tdep_info *tdep_info;
+ union
+ {
+ /* Architecture-specific information. The generic form for targets
+ that have extra requirements. */
+ struct gdbarch_tdep_info *tdep_info;
+
+ /* Architecture-specific target description data. Numerous targets
+ need only this, so give them an easy way to hold it. */
+ struct tdesc_arch_data *tdesc_data;
+
+ /* SPU file system ID. This is a single integer, so using the
+ generic form would only complicate code. Other targets may
+ reuse this member if suitable. */
+ int *id;
+ };
/* Use default: GDB_OSABI_UNINITIALIZED (-1). */
enum gdb_osabi osabi;
extern void gdbarch_free (struct gdbarch *);
+/* Get the obstack owned by ARCH. */
+
+extern obstack *gdbarch_obstack (gdbarch *arch);
/* Helper function. Allocate memory from the \`\`struct gdbarch''
obstack. The memory is freed when the corresponding architecture
is also freed. */
-extern void *gdbarch_obstack_zalloc (struct gdbarch *gdbarch, long size);
-#define GDBARCH_OBSTACK_CALLOC(GDBARCH, NR, TYPE) ((TYPE *) gdbarch_obstack_zalloc ((GDBARCH), (NR) * sizeof (TYPE)))
-#define GDBARCH_OBSTACK_ZALLOC(GDBARCH, TYPE) ((TYPE *) gdbarch_obstack_zalloc ((GDBARCH), sizeof (TYPE)))
+#define GDBARCH_OBSTACK_CALLOC(GDBARCH, NR, TYPE) \
+ obstack_calloc<TYPE> (gdbarch_obstack ((GDBARCH)), (NR))
+
+#define GDBARCH_OBSTACK_ZALLOC(GDBARCH, TYPE) \
+ obstack_zalloc<TYPE> (gdbarch_obstack ((GDBARCH)))
+/* Duplicate STRING, returning an equivalent string that's allocated on the
+ obstack associated with GDBARCH. The string is freed when the corresponding
+ architecture is also freed. */
+
+extern char *gdbarch_obstack_strdup (struct gdbarch *arch, const char *string);
/* Helper function. Force an update of the current architecture.
extern struct gdbarch *gdbarch_find_by_info (struct gdbarch_info info);
-/* Helper function. Set the global "target_gdbarch" to "gdbarch".
-
- FIXME: kettenis/20031124: Of the functions that follow, only
- gdbarch_from_bfd is supposed to survive. The others will
- dissappear since in the future GDB will (hopefully) be truly
- multi-arch. However, for now we're still stuck with the concept of
- a single active architecture. */
+/* Helper function. Set the target gdbarch to "gdbarch". */
-extern void deprecated_target_gdbarch_select_hack (struct gdbarch *gdbarch);
+extern void set_target_gdbarch (struct gdbarch *gdbarch);
/* Register per-architecture data-pointer.
extern void initialize_current_architecture (void);
/* gdbarch trace variable */
-extern int gdbarch_debug;
+extern unsigned int gdbarch_debug;
extern void gdbarch_dump (struct gdbarch *gdbarch, struct ui_file *file);
+/* Return the number of cooked registers (raw + pseudo) for ARCH. */
+
+static inline int
+gdbarch_num_cooked_regs (gdbarch *arch)
+{
+ return gdbarch_num_regs (arch) + gdbarch_num_pseudo_regs (arch);
+}
+
#endif
EOF
exec 1>&2
-#../move-if-change new-gdbarch.h gdbarch.h
-compare_new gdbarch.h
+../move-if-change new-gdbarch.h gdbarch.h
+rm -f new-gdbarch.h
#
#include "symcat.h"
#include "floatformat.h"
-
-#include "gdb_assert.h"
-#include "gdb_string.h"
#include "reggroups.h"
#include "osabi.h"
#include "gdb_obstack.h"
-#include "observer.h"
+#include "observable.h"
#include "regcache.h"
+#include "objfiles.h"
+#include "auxv.h"
+#include "frame-unwind.h"
+#include "dummy-frame.h"
/* Static function declarations */
#ifndef GDBARCH_DEBUG
#define GDBARCH_DEBUG 0
#endif
-int gdbarch_debug = GDBARCH_DEBUG;
+unsigned int gdbarch_debug = GDBARCH_DEBUG;
static void
show_gdbarch_debug (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
return string;
}
+static const char *
+pstring_ptr (char **string)
+{
+ if (string == NULL || *string == NULL)
+ return "(null)";
+ return *string;
+}
+
+/* Helper function to print a list of strings, represented as "const
+ char *const *". The list is printed comma-separated. */
+
+static const char *
+pstring_list (const char *const *list)
+{
+ static char ret[100];
+ const char *const *p;
+ size_t offset = 0;
+
+ if (list == NULL)
+ return "(null)";
+
+ ret[0] = '\0';
+ for (p = list; *p != NULL && offset < sizeof (ret); ++p)
+ {
+ size_t s = xsnprintf (ret + offset, sizeof (ret) - offset, "%s, ", *p);
+ offset += 2 + s;
+ }
+
+ if (offset > 0)
+ {
+ gdb_assert (offset - 2 < sizeof (ret));
+ ret[offset - 2] = '\0';
+ }
+
+ return ret;
+}
+
EOF
# gdbarch open the gdbarch object
do
if class_is_info_p
then
- printf " ${returntype} ${function};\n"
+ printf " %s %s;\n" "$returntype" "$function"
fi
done
printf "\n"
printf " unsigned nr_data;\n"
printf " void **data;\n"
printf "\n"
-printf " /* per-architecture swap-regions. */\n"
-printf " struct gdbarch_swap *swap;\n"
-printf "\n"
cat <<EOF
/* Multi-arch values.
gdbarch_dump(): Add a fprintf_unfiltered call so that the new
field is dumped out
- \`\`startup_gdbarch()'': Append an initial value to the static
- variable (base values on the host's c-type system).
-
get_gdbarch(): Implement the set/get functions (probably using
the macro's as shortcuts).
do
if class_is_variable_p
then
- printf " ${returntype} ${function};\n"
+ printf " %s %s;\n" "$returntype" "$function"
elif class_is_function_p
then
- printf " gdbarch_${function}_ftype *${function};\n"
+ printf " gdbarch_%s_ftype *%s;\n" "$function" "$function"
fi
done
printf "};\n"
-# A pre-initialized vector
-printf "\n"
-printf "\n"
-cat <<EOF
-/* The default architecture uses host values (for want of a better
- choice). */
-EOF
-printf "\n"
-printf "extern const struct bfd_arch_info bfd_default_arch_struct;\n"
-printf "\n"
-printf "struct gdbarch startup_gdbarch =\n"
-printf "{\n"
-printf " 1, /* Always initialized. */\n"
-printf " NULL, /* The obstack. */\n"
-printf " /* basic architecture information. */\n"
-function_list | while do_read
-do
- if class_is_info_p
- then
- printf " ${staticdefault}, /* ${function} */\n"
- fi
-done
-cat <<EOF
- /* target specific vector and its dump routine. */
- NULL, NULL,
- /*per-architecture data-pointers and swap regions. */
- 0, NULL, NULL,
- /* Multi-arch values */
-EOF
-function_list | while do_read
-do
- if class_is_function_p || class_is_variable_p
- then
- printf " ${staticdefault}, /* ${function} */\n"
- fi
-done
-cat <<EOF
- /* startup_gdbarch() */
-};
-
-struct gdbarch *target_gdbarch = &startup_gdbarch;
-EOF
-
# Create a new gdbarch struct
cat <<EOF
/* Create an obstack for allocating all the per-architecture memory,
then use that to allocate the architecture vector. */
- struct obstack *obstack = XMALLOC (struct obstack);
+ struct obstack *obstack = XNEW (struct obstack);
obstack_init (obstack);
- gdbarch = obstack_alloc (obstack, sizeof (*gdbarch));
+ gdbarch = XOBNEW (obstack, struct gdbarch);
memset (gdbarch, 0, sizeof (*gdbarch));
gdbarch->obstack = obstack;
do
if class_is_info_p
then
- printf " gdbarch->${function} = info->${function};\n"
+ printf " gdbarch->%s = info->%s;\n" "$function" "$function"
fi
done
printf "\n"
do
if class_is_function_p || class_is_variable_p
then
- if [ -n "${predefault}" -a "x${predefault}" != "x0" ]
+ if [ -n "${predefault}" ] && [ "x${predefault}" != "x0" ]
then
- printf " gdbarch->${function} = ${predefault};\n"
+ printf " gdbarch->%s = %s;\n" "$function" "$predefault"
fi
fi
done
printf "\n"
printf "\n"
cat <<EOF
-/* Allocate extra space using the per-architecture obstack. */
-void *
-gdbarch_obstack_zalloc (struct gdbarch *arch, long size)
+obstack *gdbarch_obstack (gdbarch *arch)
{
- void *data = obstack_alloc (arch->obstack, size);
+ return arch->obstack;
+}
- memset (data, 0, size);
- return data;
+/* See gdbarch.h. */
+
+char *
+gdbarch_obstack_strdup (struct gdbarch *arch, const char *string)
+{
+ return obstack_strdup (arch->obstack, string);
}
static void
verify_gdbarch (struct gdbarch *gdbarch)
{
- struct ui_file *log;
- struct cleanup *cleanups;
- long length;
- char *buf;
+ string_file log;
- log = mem_fileopen ();
- cleanups = make_cleanup_ui_file_delete (log);
/* fundamental */
if (gdbarch->byte_order == BFD_ENDIAN_UNKNOWN)
- fprintf_unfiltered (log, "\n\tbyte-order");
+ log.puts ("\n\tbyte-order");
if (gdbarch->bfd_arch_info == NULL)
- fprintf_unfiltered (log, "\n\tbfd_arch_info");
+ log.puts ("\n\tbfd_arch_info");
/* Check those that need to be defined for the given multi-arch level. */
EOF
function_list | while do_read
then
if [ "x${invalid_p}" = "x0" ]
then
- printf " /* Skip verify of ${function}, invalid_p == 0 */\n"
+ printf " /* Skip verify of %s, invalid_p == 0 */\n" "$function"
elif class_is_predicate_p
then
- printf " /* Skip verify of ${function}, has predicate. */\n"
+ printf " /* Skip verify of %s, has predicate. */\n" "$function"
# FIXME: See do_read for potential simplification
- elif [ -n "${invalid_p}" -a -n "${postdefault}" ]
+ elif [ -n "${invalid_p}" ] && [ -n "${postdefault}" ]
then
- printf " if (${invalid_p})\n"
- printf " gdbarch->${function} = ${postdefault};\n"
- elif [ -n "${predefault}" -a -n "${postdefault}" ]
+ printf " if (%s)\n" "$invalid_p"
+ printf " gdbarch->%s = %s;\n" "$function" "$postdefault"
+ elif [ -n "${predefault}" ] && [ -n "${postdefault}" ]
then
- printf " if (gdbarch->${function} == ${predefault})\n"
- printf " gdbarch->${function} = ${postdefault};\n"
+ printf " if (gdbarch->%s == %s)\n" "$function" "$predefault"
+ printf " gdbarch->%s = %s;\n" "$function" "$postdefault"
elif [ -n "${postdefault}" ]
then
- printf " if (gdbarch->${function} == 0)\n"
- printf " gdbarch->${function} = ${postdefault};\n"
+ printf " if (gdbarch->%s == 0)\n" "$function"
+ printf " gdbarch->%s = %s;\n" "$function" "$postdefault"
elif [ -n "${invalid_p}" ]
then
- printf " if (${invalid_p})\n"
- printf " fprintf_unfiltered (log, \"\\\\n\\\\t${function}\");\n"
+ printf " if (%s)\n" "$invalid_p"
+ printf " log.puts (\"\\\\n\\\\t%s\");\n" "$function"
elif [ -n "${predefault}" ]
then
- printf " if (gdbarch->${function} == ${predefault})\n"
- printf " fprintf_unfiltered (log, \"\\\\n\\\\t${function}\");\n"
+ printf " if (gdbarch->%s == %s)\n" "$function" "$predefault"
+ printf " log.puts (\"\\\\n\\\\t%s\");\n" "$function"
fi
fi
done
cat <<EOF
- buf = ui_file_xstrdup (log, &length);
- make_cleanup (xfree, buf);
- if (length > 0)
+ if (!log.empty ())
internal_error (__FILE__, __LINE__,
_("verify_gdbarch: the following are invalid ...%s"),
- buf);
- do_cleanups (cleanups);
+ log.c_str ());
}
EOF
"gdbarch_dump: GDB_NM_FILE = %s\\n",
gdb_nm_file);
EOF
-function_list | sort -t: -k 3 | while do_read
+function_list | sort '-t;' -k 3 | while do_read
do
# First the predicate
if class_is_predicate_p
then
printf " fprintf_unfiltered (file,\n"
- printf " \"gdbarch_dump: gdbarch_${function}_p() = %%d\\\\n\",\n"
- printf " gdbarch_${function}_p (gdbarch));\n"
+ printf " \"gdbarch_dump: gdbarch_%s_p() = %%d\\\\n\",\n" "$function"
+ printf " gdbarch_%s_p (gdbarch));\n" "$function"
fi
# Print the corresponding value.
if class_is_function_p
then
printf " fprintf_unfiltered (file,\n"
- printf " \"gdbarch_dump: ${function} = <%%s>\\\\n\",\n"
- printf " host_address_to_string (gdbarch->${function}));\n"
+ printf " \"gdbarch_dump: %s = <%%s>\\\\n\",\n" "$function"
+ printf " host_address_to_string (gdbarch->%s));\n" "$function"
else
# It is a variable
case "${print}:${returntype}" in
;;
esac
printf " fprintf_unfiltered (file,\n"
- printf " \"gdbarch_dump: ${function} = %s\\\\n\",\n" "${fmt}"
- printf " ${print});\n"
+ printf " \"gdbarch_dump: %s = %s\\\\n\",\n" "$function" "$fmt"
+ printf " %s);\n" "$print"
fi
done
cat <<EOF
then
printf "\n"
printf "int\n"
- printf "gdbarch_${function}_p (struct gdbarch *gdbarch)\n"
+ printf "gdbarch_%s_p (struct gdbarch *gdbarch)\n" "$function"
printf "{\n"
printf " gdb_assert (gdbarch != NULL);\n"
- printf " return ${predicate};\n"
+ printf " return %s;\n" "$predicate"
printf "}\n"
fi
if class_is_function_p
then
printf "\n"
- printf "${returntype}\n"
+ printf "%s\n" "$returntype"
if [ "x${formal}" = "xvoid" ]
then
- printf "gdbarch_${function} (struct gdbarch *gdbarch)\n"
+ printf "gdbarch_%s (struct gdbarch *gdbarch)\n" "$function"
else
- printf "gdbarch_${function} (struct gdbarch *gdbarch, ${formal})\n"
+ printf "gdbarch_%s (struct gdbarch *gdbarch, %s)\n" "$function" "$formal"
fi
printf "{\n"
printf " gdb_assert (gdbarch != NULL);\n"
- printf " gdb_assert (gdbarch->${function} != NULL);\n"
+ printf " gdb_assert (gdbarch->%s != NULL);\n" "$function"
if class_is_predicate_p && test -n "${predefault}"
then
# Allow a call to a function with a predicate.
- printf " /* Do not check predicate: ${predicate}, allow call. */\n"
+ printf " /* Do not check predicate: %s, allow call. */\n" "$predicate"
fi
printf " if (gdbarch_debug >= 2)\n"
- printf " fprintf_unfiltered (gdb_stdlog, \"gdbarch_${function} called\\\\n\");\n"
- if [ "x${actual}" = "x-" -o "x${actual}" = "x" ]
+ printf " fprintf_unfiltered (gdb_stdlog, \"gdbarch_%s called\\\\n\");\n" "$function"
+ if [ "x${actual:-}" = "x-" ] || [ "x${actual:-}" = "x" ]
then
if class_is_multiarch_p
then
fi
if [ "x${returntype}" = "xvoid" ]
then
- printf " gdbarch->${function} (${params});\n"
+ printf " gdbarch->%s (%s);\n" "$function" "$params"
else
- printf " return gdbarch->${function} (${params});\n"
+ printf " return gdbarch->%s (%s);\n" "$function" "$params"
fi
printf "}\n"
printf "\n"
printf "void\n"
- printf "set_gdbarch_${function} (struct gdbarch *gdbarch,\n"
- printf " `echo ${function} | sed -e 's/./ /g'` gdbarch_${function}_ftype ${function})\n"
+ printf "set_gdbarch_%s (struct gdbarch *gdbarch,\n" "$function"
+ printf " %s gdbarch_%s_ftype %s)\n" "$(echo "$function" | sed -e 's/./ /g')" "$function" "$function"
printf "{\n"
- printf " gdbarch->${function} = ${function};\n"
+ printf " gdbarch->%s = %s;\n" "$function" "$function"
printf "}\n"
elif class_is_variable_p
then
printf "\n"
- printf "${returntype}\n"
- printf "gdbarch_${function} (struct gdbarch *gdbarch)\n"
+ printf "%s\n" "$returntype"
+ printf "gdbarch_%s (struct gdbarch *gdbarch)\n" "$function"
printf "{\n"
printf " gdb_assert (gdbarch != NULL);\n"
if [ "x${invalid_p}" = "x0" ]
then
- printf " /* Skip verify of ${function}, invalid_p == 0 */\n"
+ printf " /* Skip verify of %s, invalid_p == 0 */\n" "$function"
elif [ -n "${invalid_p}" ]
then
printf " /* Check variable is valid. */\n"
- printf " gdb_assert (!(${invalid_p}));\n"
+ printf " gdb_assert (!(%s));\n" "$invalid_p"
elif [ -n "${predefault}" ]
then
printf " /* Check variable changed from pre-default. */\n"
- printf " gdb_assert (gdbarch->${function} != ${predefault});\n"
+ printf " gdb_assert (gdbarch->%s != %s);\n" "$function" "$predefault"
fi
printf " if (gdbarch_debug >= 2)\n"
- printf " fprintf_unfiltered (gdb_stdlog, \"gdbarch_${function} called\\\\n\");\n"
- printf " return gdbarch->${function};\n"
+ printf " fprintf_unfiltered (gdb_stdlog, \"gdbarch_%s called\\\\n\");\n" "$function"
+ printf " return gdbarch->%s;\n" "$function"
printf "}\n"
printf "\n"
printf "void\n"
- printf "set_gdbarch_${function} (struct gdbarch *gdbarch,\n"
- printf " `echo ${function} | sed -e 's/./ /g'` ${returntype} ${function})\n"
+ printf "set_gdbarch_%s (struct gdbarch *gdbarch,\n" "$function"
+ printf " %s %s %s)\n" "$(echo "$function" | sed -e 's/./ /g')" "$returntype" "$function"
printf "{\n"
- printf " gdbarch->${function} = ${function};\n"
+ printf " gdbarch->%s = %s;\n" "$function" "$function"
printf "}\n"
elif class_is_info_p
then
printf "\n"
- printf "${returntype}\n"
- printf "gdbarch_${function} (struct gdbarch *gdbarch)\n"
+ printf "%s\n" "$returntype"
+ printf "gdbarch_%s (struct gdbarch *gdbarch)\n" "$function"
printf "{\n"
printf " gdb_assert (gdbarch != NULL);\n"
printf " if (gdbarch_debug >= 2)\n"
- printf " fprintf_unfiltered (gdb_stdlog, \"gdbarch_${function} called\\\\n\");\n"
- printf " return gdbarch->${function};\n"
+ printf " fprintf_unfiltered (gdb_stdlog, \"gdbarch_%s called\\\\n\");\n" "$function"
+ printf " return gdbarch->%s;\n" "$function"
printf "}\n"
fi
done
for (curr = &gdbarch_data_registry.registrations;
(*curr) != NULL;
curr = &(*curr)->next);
- (*curr) = XMALLOC (struct gdbarch_data_registration);
+ (*curr) = XNEW (struct gdbarch_data_registration);
(*curr)->next = NULL;
- (*curr)->data = XMALLOC (struct gdbarch_data);
+ (*curr)->data = XNEW (struct gdbarch_data);
(*curr)->data->index = gdbarch_data_registry.nr++;
(*curr)->data->pre_init = pre_init;
(*curr)->data->post_init = post_init;
static void
append_name (const char ***buf, int *nr, const char *name)
{
- *buf = xrealloc (*buf, sizeof (char**) * (*nr + 1));
+ *buf = XRESIZEVEC (const char *, *buf, *nr + 1);
(*buf)[*nr] = name;
*nr += 1;
}
bfd_arch_info->printable_name,
host_address_to_string (init));
/* Append it */
- (*curr) = XMALLOC (struct gdbarch_registration);
+ (*curr) = XNEW (struct gdbarch_registration);
(*curr)->bfd_architecture = bfd_architecture;
(*curr)->init = init;
(*curr)->dump_tdep = dump_tdep;
if (new_gdbarch->initialized_p)
{
struct gdbarch_list **list;
- struct gdbarch_list *this;
+ struct gdbarch_list *self;
if (gdbarch_debug)
fprintf_unfiltered (gdb_stdlog, "gdbarch_find_by_info: "
"Previous architecture %s (%s) selected\n",
list = &(*list)->next);
/* It had better be in the list of architectures. */
gdb_assert ((*list) != NULL && (*list)->gdbarch == new_gdbarch);
- /* Unlink THIS. */
- this = (*list);
- (*list) = this->next;
- /* Insert THIS at the front. */
- this->next = rego->arches;
- rego->arches = this;
+ /* Unlink SELF. */
+ self = (*list);
+ (*list) = self->next;
+ /* Insert SELF at the front. */
+ self->next = rego->arches;
+ rego->arches = self;
/* Return it. */
return new_gdbarch;
}
/* Insert the new architecture into the front of the architecture
list (keep the list sorted Most Recently Used). */
{
- struct gdbarch_list *this = XMALLOC (struct gdbarch_list);
- this->next = rego->arches;
- this->gdbarch = new_gdbarch;
- rego->arches = this;
+ struct gdbarch_list *self = XNEW (struct gdbarch_list);
+ self->next = rego->arches;
+ self->gdbarch = new_gdbarch;
+ rego->arches = self;
}
/* Check that the newly installed architecture is valid. Plug in
/* Make the specified architecture current. */
void
-deprecated_target_gdbarch_select_hack (struct gdbarch *new_gdbarch)
+set_target_gdbarch (struct gdbarch *new_gdbarch)
{
gdb_assert (new_gdbarch != NULL);
gdb_assert (new_gdbarch->initialized_p);
- target_gdbarch = new_gdbarch;
- observer_notify_architecture_changed (new_gdbarch);
+ current_inferior ()->gdbarch = new_gdbarch;
+ gdb::observers::architecture_changed.notify (new_gdbarch);
registers_changed ();
}
-extern void _initialize_gdbarch (void);
+/* Return the current inferior's arch. */
+
+struct gdbarch *
+target_gdbarch (void)
+{
+ return current_inferior ()->gdbarch;
+}
+void _initialize_gdbarch ();
void
-_initialize_gdbarch (void)
+_initialize_gdbarch ()
{
- add_setshow_zinteger_cmd ("arch", class_maintenance, &gdbarch_debug, _("\\
+ add_setshow_zuinteger_cmd ("arch", class_maintenance, &gdbarch_debug, _("\\
Set architecture debugging."), _("\\
Show architecture debugging."), _("\\
When non-zero, architecture debugging is enabled."),
# close things off
exec 1>&2
-#../move-if-change new-gdbarch.c gdbarch.c
-compare_new gdbarch.c
+../move-if-change new-gdbarch.c gdbarch.c
+rm -f new-gdbarch.c
projects / deliverable / binutils-gdb.git / blobdiff