# An optional indicator for any predicte to wrap around the
# print member code.
+ # () -> Call a custom function to do the dump.
# exp -> Wrap print up in ``if (${print_p}) ...
# ``'' -> No predicate
f:2:REGISTER_CONVERT_TO_VIRTUAL:void:register_convert_to_virtual:int regnum, struct type *type, char *from, char *to:regnum, type, from, to:::0::0
f:2:REGISTER_CONVERT_TO_RAW:void:register_convert_to_raw:struct type *type, int regnum, char *from, char *to:type, regnum, from, to:::0::0
#
-f:2:POINTER_TO_ADDRESS:CORE_ADDR:pointer_to_address:struct type *type, char *buf:type, buf:::generic_pointer_to_address::0
-f:2:ADDRESS_TO_POINTER:void:address_to_pointer:struct type *type, char *buf, CORE_ADDR addr:type, buf, addr:::generic_address_to_pointer::0
+f:2:POINTER_TO_ADDRESS:CORE_ADDR:pointer_to_address:struct type *type, void *buf:type, buf:::unsigned_pointer_to_address::0
+f:2:ADDRESS_TO_POINTER:void:address_to_pointer:struct type *type, void *buf, CORE_ADDR addr:type, buf, addr:::unsigned_address_to_pointer::0
#
f:2:RETURN_VALUE_ON_STACK:int:return_value_on_stack:struct type *type:type:::generic_return_value_on_stack_not::0
f:2:EXTRACT_RETURN_VALUE:void:extract_return_value:struct type *type, char *regbuf, char *valbuf:type, regbuf, valbuf::0:0
gdbarch'' from the ARCHES list - indicating that the new
architecture is just a synonym for an earlier architecture (see
gdbarch_list_lookup_by_info()); a newly created \`\`struct gdbarch''
- - that describes the selected architecture (see
- gdbarch_alloc()). */
+ - that describes the selected architecture (see gdbarch_alloc()).
+
+ The DUMP_TDEP function shall print out all target specific values.
+ Care should be taken to ensure that the function works in both the
+ multi-arch and non- multi-arch cases. */
struct gdbarch_list
{
};
typedef struct gdbarch *(gdbarch_init_ftype) (struct gdbarch_info info, struct gdbarch_list *arches);
+typedef void (gdbarch_dump_tdep_ftype) (struct gdbarch *gdbarch, struct ui_file *file);
+/* DEPRECATED - use gdbarch_register() */
extern void register_gdbarch_init (enum bfd_architecture architecture, gdbarch_init_ftype *);
+extern void gdbarch_register (enum bfd_architecture architecture,
+ gdbarch_init_ftype *,
+ gdbarch_dump_tdep_ftype *);
+
+
+/* Return a freshly allocated, NULL terminated, array of the valid
+ architecture names. Since architectures are registered during the
+ _initialize phase this function only returns useful information
+ once initialization has been completed. */
+
+extern const char **gdbarch_printable_names (void);
+
/* Helper function. Search the list of ARCHES for a GDBARCH that
matches the information provided by INFO. */
extern struct gdbarch *gdbarch_alloc (const struct gdbarch_info *info, struct gdbarch_tdep *tdep);
-/* Helper function. Free a partially-constructed \`\`struct gdbarch''. */
+/* Helper function. Free a partially-constructed \`\`struct gdbarch''.
+ It is assumed that the caller freeds the \`\`struct
+ gdbarch_tdep''. */
+
extern void gdbarch_free (struct gdbarch *);
#define TARGET_ARCHITECTURE (target_architecture + 0)
#endif
-/* Notify the target dependant backend of a change to the selected
- architecture. A zero return status indicates that the target did
- not like the change. */
-
-extern int (*target_architecture_hook) (const struct bfd_arch_info *);
-
-
/* The target-system-dependant disassembler is semi-dynamic */
extern void set_gdbarch_from_file (bfd *);
-/* Explicitly set the dynamic target-system-dependant parameters based
- on bfd_architecture and machine. */
-
-extern void set_architecture_from_arch_mach (enum bfd_architecture, unsigned long);
-
-
/* Initialize the current architecture to the "first" one we find on
our list. */
extern void initialize_current_architecture (void);
-/* Helper function for targets that don't know how my arguments are
- being passed */
-
-extern int frame_num_args_unknown (struct frame_info *fi);
-
/* gdbarch trace variable */
extern int gdbarch_debug;
-extern void gdbarch_dump (void);
+extern void gdbarch_dump (struct gdbarch *gdbarch, struct ui_file *file);
#endif
EOF
echo ""
echo " /* target specific vector. */"
echo " struct gdbarch_tdep *tdep;"
+echo " gdbarch_dump_tdep_ftype *dump_tdep;"
echo ""
echo " /* per-architecture data-pointers */"
echo " int nr_data;"
echo ""
echo "extern const struct bfd_arch_info bfd_default_arch_struct;"
echo ""
-echo "struct gdbarch startup_gdbarch = {"
+echo "struct gdbarch startup_gdbarch ="
+echo "{"
echo " /* basic architecture information */"
-function_list | while do_read # eval read $read
+function_list | while do_read
do
if class_is_info_p
then
fi
done
cat <<EOF
- /* target specific vector */
- NULL,
+ /* target specific vector and its dump routine */
+ NULL, NULL,
/*per-architecture data-pointers and swap regions */
0, NULL, NULL,
/* Multi-arch values */
cat <<EOF
/* startup_gdbarch() */
};
+
struct gdbarch *current_gdbarch = &startup_gdbarch;
EOF
However, if an architecture's init function encounters an error
building the structure, it may need to clean up a partially
constructed gdbarch. */
+
void
gdbarch_free (struct gdbarch *arch)
{
# dump the structure
echo ""
echo ""
-echo "/* Print out the details of the current architecture. */"
-echo ""
cat <<EOF
+/* Print out the details of the current architecture. */
+
+/* NOTE/WARNING: The parameter is called \`\`current_gdbarch'' so that it
+ just happens to match the global variable \`\`current_gdbarch''. That
+ way macros refering to that variable get the local and not the global
+ version - ulgh. Once everything is parameterised with gdbarch, this
+ will go away. */
+
void
-gdbarch_dump (void)
+gdbarch_dump (struct gdbarch *gdbarch, struct ui_file *file)
{
+ fprintf_unfiltered (file,
+ "gdbarch_dump: GDB_MULTI_ARCH = %d\\n",
+ GDB_MULTI_ARCH);
EOF
-function_list | while do_read # eval read $read
+function_list | while do_read
do
- echo "#ifdef ${macro}"
+ if [ ${returntype} == "void" ]
+ then
+ echo "#if defined (${macro}) && GDB_MULTI_ARCH"
+ echo " /* Macro might contain \`[{}]' when not multi-arch */"
+ else
+ echo "#ifdef ${macro}"
+ fi
if class_is_function_p
then
- echo " fprintf_unfiltered (gdb_stdlog,"
- echo " \"gdbarch_update: ${macro} = 0x%08lx\\n\","
- echo " (long) current_gdbarch->${function}"
- echo " /*${macro} ()*/);"
+ echo " fprintf_unfiltered (file,"
+ echo " \"gdbarch_dump: %s # %s\\n\","
+ echo " \"${macro}(${actual})\","
+ echo " XSTRING (${macro} (${actual})));"
else
- if [ "${print_p}" ]
- then
- echo " if (${print_p})"
- echo " fprintf_unfiltered (gdb_stdlog,"
- echo " \"gdbarch_update: ${macro} = ${fmt}\\n\","
- echo " ${print});"
- else
- echo " fprintf_unfiltered (gdb_stdlog,"
- echo " \"gdbarch_update: ${macro} = ${fmt}\\n\","
- echo " ${print});"
- fi
+ echo " fprintf_unfiltered (file,"
+ echo " \"gdbarch_dump: ${macro} # %s\\n\","
+ echo " XSTRING (${macro}));"
+ fi
+ echo "#endif"
+done
+function_list | while do_read
+do
+ echo "#ifdef ${macro}"
+ if [ "${print_p}" = "()" ]
+ then
+ echo " gdbarch_dump_${function} (current_gdbarch);"
+ elif [ "${print_p}" = "0" ]
+ then
+ echo " /* skip print of ${macro}, print_p == 0. */"
+ elif [ "${print_p}" ]
+ then
+ echo " if (${print_p})"
+ echo " fprintf_unfiltered (file,"
+ echo " \"gdbarch_dump: ${macro} = ${fmt}\\n\","
+ echo " ${print});"
+ elif class_is_function_p
+ then
+ echo " if (GDB_MULTI_ARCH)"
+ echo " fprintf_unfiltered (file,"
+ echo " \"gdbarch_dump: ${macro} = 0x%08lx\\n\","
+ echo " (long) current_gdbarch->${function}"
+ echo " /*${macro} ()*/);"
+ else
+ echo " fprintf_unfiltered (file,"
+ echo " \"gdbarch_dump: ${macro} = ${fmt}\\n\","
+ echo " ${print});"
fi
echo "#endif"
done
cat <<EOF
- fprintf_unfiltered (gdb_stdlog,
- "gdbarch_update: GDB_MULTI_ARCH = %d\\n",
- GDB_MULTI_ARCH);
+ if (current_gdbarch->dump_tdep != NULL)
+ current_gdbarch->dump_tdep (current_gdbarch, file);
}
EOF
/* Keep a registrary of the architectures known by GDB. */
-struct gdbarch_init_registration
+struct gdbarch_registration
{
enum bfd_architecture bfd_architecture;
gdbarch_init_ftype *init;
+ gdbarch_dump_tdep_ftype *dump_tdep;
struct gdbarch_list *arches;
- struct gdbarch_init_registration *next;
+ struct gdbarch_registration *next;
};
-static struct gdbarch_init_registration *gdbarch_init_registrary = NULL;
+static struct gdbarch_registration *gdbarch_registrary = NULL;
+
+static void
+append_name (const char ***buf, int *nr, const char *name)
+{
+ *buf = xrealloc (*buf, sizeof (char**) * (*nr + 1));
+ (*buf)[*nr] = name;
+ *nr += 1;
+}
+
+const char **
+gdbarch_printable_names (void)
+{
+ if (GDB_MULTI_ARCH)
+ {
+ /* Accumulate a list of names based on the registed list of
+ architectures. */
+ enum bfd_architecture a;
+ int nr_arches = 0;
+ const char **arches = NULL;
+ struct gdbarch_registration *rego;
+ for (rego = gdbarch_registrary;
+ rego != NULL;
+ rego = rego->next)
+ {
+ const struct bfd_arch_info *ap;
+ ap = bfd_lookup_arch (rego->bfd_architecture, 0);
+ if (ap == NULL)
+ internal_error ("gdbarch_architecture_names: multi-arch unknown");
+ do
+ {
+ append_name (&arches, &nr_arches, ap->printable_name);
+ ap = ap->next;
+ }
+ while (ap != NULL);
+ }
+ append_name (&arches, &nr_arches, NULL);
+ return arches;
+ }
+ else
+ /* Just return all the architectures that BFD knows. Assume that
+ the legacy architecture framework supports them. */
+ return bfd_arch_list ();
+}
+
void
-register_gdbarch_init (enum bfd_architecture bfd_architecture,
- gdbarch_init_ftype *init)
+gdbarch_register (enum bfd_architecture bfd_architecture,
+ gdbarch_init_ftype *init,
+ gdbarch_dump_tdep_ftype *dump_tdep)
{
- struct gdbarch_init_registration **curr;
+ struct gdbarch_registration **curr;
const struct bfd_arch_info *bfd_arch_info;
/* Check that BFD reconizes this architecture */
bfd_arch_info = bfd_lookup_arch (bfd_architecture, 0);
internal_error ("gdbarch: Attempt to register unknown architecture (%d)", bfd_architecture);
}
/* Check that we haven't seen this architecture before */
- for (curr = &gdbarch_init_registrary;
+ for (curr = &gdbarch_registrary;
(*curr) != NULL;
curr = &(*curr)->next)
{
bfd_arch_info->printable_name,
(long) init);
/* Append it */
- (*curr) = XMALLOC (struct gdbarch_init_registration);
+ (*curr) = XMALLOC (struct gdbarch_registration);
(*curr)->bfd_architecture = bfd_architecture;
(*curr)->init = init;
+ (*curr)->dump_tdep = dump_tdep;
(*curr)->arches = NULL;
(*curr)->next = NULL;
+ /* When non- multi-arch, install what ever target dump routine we've
+ been provided - hopefully that routine has been writen correct
+ and works regardless of multi-arch. */
+ if (!GDB_MULTI_ARCH && dump_tdep != NULL
+ && startup_gdbarch.dump_tdep == NULL)
+ startup_gdbarch.dump_tdep = dump_tdep;
+}
+
+void
+register_gdbarch_init (enum bfd_architecture bfd_architecture,
+ gdbarch_init_ftype *init)
+{
+ gdbarch_register (bfd_architecture, init, NULL);
}
-
/* Look for an architecture using gdbarch_info. Base search on only
{
struct gdbarch *new_gdbarch;
struct gdbarch_list **list;
- struct gdbarch_init_registration *rego;
+ struct gdbarch_registration *rego;
/* Fill in any missing bits. Most important is the bfd_architecture
which is used to select the target architecture. */
/* A default for abfd? */
/* Find the target that knows about this architecture. */
- for (rego = gdbarch_init_registrary;
- rego != NULL && rego->bfd_architecture != info.bfd_architecture;
- rego = rego->next);
+ for (rego = gdbarch_registrary;
+ rego != NULL;
+ rego = rego->next)
+ if (rego->bfd_architecture == info.bfd_architecture)
+ break;
if (rego == NULL)
{
if (gdbarch_debug)
if ((*list)->gdbarch == new_gdbarch)
{
if (gdbarch_debug)
- fprintf_unfiltered (gdb_stdlog, "gdbarch_update: Previous architecture 0x%08lx (%s) selected\n",
+ fprintf_unfiltered (gdb_stdlog,
+ "gdbarch_update: Previous architecture 0x%08lx (%s) selected\n",
(long) new_gdbarch,
new_gdbarch->bfd_arch_info->printable_name);
current_gdbarch = new_gdbarch;
return 1;
}
}
-
+
/* Append this new architecture to this targets list. */
(*list) = XMALLOC (struct gdbarch_list);
(*list)->next = NULL;
"gdbarch_update: New architecture 0x%08lx (%s) selected\n",
(long) new_gdbarch,
new_gdbarch->bfd_arch_info->printable_name);
- gdbarch_dump ();
}
- /* Check that the newly installed architecture is valid. */
+ /* Check that the newly installed architecture is valid. Plug in
+ any post init values. */
+ new_gdbarch->dump_tdep = rego->dump_tdep;
verify_gdbarch (new_gdbarch);
/* Initialize the per-architecture memory (swap) areas.
must be updated before these modules are called. */
init_gdbarch_data (new_gdbarch);
- return 1;
-}
-
-
-
-/* Functions to manipulate the endianness of the target. */
-
-#ifdef TARGET_BYTE_ORDER_SELECTABLE
-/* compat - Catch old targets that expect a selectable byte-order to
- default to BIG_ENDIAN */
-#ifndef TARGET_BYTE_ORDER_DEFAULT
-#define TARGET_BYTE_ORDER_DEFAULT BIG_ENDIAN
-#endif
-#endif
-#if !TARGET_BYTE_ORDER_SELECTABLE_P
-#ifndef TARGET_BYTE_ORDER_DEFAULT
-/* compat - Catch old non byte-order selectable targets that do not
- define TARGET_BYTE_ORDER_DEFAULT and instead expect
- TARGET_BYTE_ORDER to be used as the default. For targets that
- defined neither TARGET_BYTE_ORDER nor TARGET_BYTE_ORDER_DEFAULT the
- below will get a strange compiler warning. */
-#define TARGET_BYTE_ORDER_DEFAULT TARGET_BYTE_ORDER
-#endif
-#endif
-#ifndef TARGET_BYTE_ORDER_DEFAULT
-#define TARGET_BYTE_ORDER_DEFAULT BIG_ENDIAN /* arbitrary */
-#endif
-int target_byte_order = TARGET_BYTE_ORDER_DEFAULT;
-int target_byte_order_auto = 1;
-
-/* Chain containing the \"set endian\" commands. */
-static struct cmd_list_element *endianlist = NULL;
-
-/* Called by \`\`show endian''. */
-static void
-show_endian (char *args, int from_tty)
-{
- char *msg =
- (TARGET_BYTE_ORDER_AUTO
- ? "The target endianness is set automatically (currently %s endian)\n"
- : "The target is assumed to be %s endian\n");
- printf_unfiltered (msg, (TARGET_BYTE_ORDER == BIG_ENDIAN ? "big" : "little"));
-}
-
-/* Called if the user enters \`\`set endian'' without an argument. */
-static void
-set_endian (char *args, int from_tty)
-{
- printf_unfiltered ("\"set endian\" must be followed by \"auto\", \"big\" or \"little\".\n");
- show_endian (args, from_tty);
-}
-
-/* Called by \`\`set endian big''. */
-static void
-set_endian_big (char *args, int from_tty)
-{
- if (TARGET_BYTE_ORDER_SELECTABLE_P)
- {
- target_byte_order = BIG_ENDIAN;
- target_byte_order_auto = 0;
- if (GDB_MULTI_ARCH)
- {
- struct gdbarch_info info;
- memset (&info, 0, sizeof info);
- info.byte_order = BIG_ENDIAN;
- gdbarch_update (info);
- }
- }
- else
- {
- printf_unfiltered ("Byte order is not selectable.");
- show_endian (args, from_tty);
- }
-}
-
-/* Called by \`\`set endian little''. */
-static void
-set_endian_little (char *args, int from_tty)
-{
- if (TARGET_BYTE_ORDER_SELECTABLE_P)
- {
- target_byte_order = LITTLE_ENDIAN;
- target_byte_order_auto = 0;
- if (GDB_MULTI_ARCH)
- {
- struct gdbarch_info info;
- memset (&info, 0, sizeof info);
- info.byte_order = LITTLE_ENDIAN;
- gdbarch_update (info);
- }
- }
- else
- {
- printf_unfiltered ("Byte order is not selectable.");
- show_endian (args, from_tty);
- }
-}
-
-/* Called by \`\`set endian auto''. */
-static void
-set_endian_auto (char *args, int from_tty)
-{
- if (TARGET_BYTE_ORDER_SELECTABLE_P)
- {
- target_byte_order_auto = 1;
- }
- else
- {
- printf_unfiltered ("Byte order is not selectable.");
- show_endian (args, from_tty);
- }
-}
-
-/* Set the endianness from a BFD. */
-static void
-set_endian_from_file (bfd *abfd)
-{
- if (TARGET_BYTE_ORDER_SELECTABLE_P)
- {
- int want;
-
- if (bfd_big_endian (abfd))
- want = BIG_ENDIAN;
- else
- want = LITTLE_ENDIAN;
- if (TARGET_BYTE_ORDER_AUTO)
- target_byte_order = want;
- else if (TARGET_BYTE_ORDER != want)
- warning ("%s endian file does not match %s endian target.",
- want == BIG_ENDIAN ? "big" : "little",
- TARGET_BYTE_ORDER == BIG_ENDIAN ? "big" : "little");
- }
- else
- {
- if (bfd_big_endian (abfd)
- ? TARGET_BYTE_ORDER != BIG_ENDIAN
- : TARGET_BYTE_ORDER == BIG_ENDIAN)
- warning ("%s endian file does not match %s endian target.",
- bfd_big_endian (abfd) ? "big" : "little",
- TARGET_BYTE_ORDER == BIG_ENDIAN ? "big" : "little");
- }
-}
-
-
-
-/* Functions to manipulate the architecture of the target */
-
-enum set_arch { set_arch_auto, set_arch_manual };
-
-int target_architecture_auto = 1;
-extern const struct bfd_arch_info bfd_default_arch_struct;
-const struct bfd_arch_info *target_architecture = &bfd_default_arch_struct;
-int (*target_architecture_hook) (const struct bfd_arch_info *ap);
-
-static void show_endian (char *, int);
-static void set_endian (char *, int);
-static void set_endian_big (char *, int);
-static void set_endian_little (char *, int);
-static void set_endian_auto (char *, int);
-static void set_endian_from_file (bfd *);
-static int arch_ok (const struct bfd_arch_info *arch);
-static void set_arch (const struct bfd_arch_info *arch, enum set_arch type);
-static void show_architecture (char *, int);
-static void set_architecture (char *, int);
-static void info_architecture (char *, int);
-static void set_architecture_from_file (bfd *);
-
-/* Do the real work of changing the current architecture */
-
-static int
-arch_ok (const struct bfd_arch_info *arch)
-{
- /* Should be performing the more basic check that the binary is
- compatible with GDB. */
- /* Check with the target that the architecture is valid. */
- return (target_architecture_hook == NULL
- || target_architecture_hook (arch));
-}
-
-static void
-set_arch (const struct bfd_arch_info *arch,
- enum set_arch type)
-{
- switch (type)
- {
- case set_arch_auto:
- if (!arch_ok (arch))
- warning ("Target may not support %s architecture",
- arch->printable_name);
- target_architecture = arch;
- break;
- case set_arch_manual:
- if (!arch_ok (arch))
- {
- printf_unfiltered ("Target does not support \`%s' architecture.\n",
- arch->printable_name);
- }
- else
- {
- target_architecture_auto = 0;
- target_architecture = arch;
- }
- break;
- }
if (gdbarch_debug)
- gdbarch_dump ();
-}
-
-/* Called if the user enters \`\`show architecture'' without an argument. */
-static void
-show_architecture (char *args, int from_tty)
-{
- const char *arch;
- arch = TARGET_ARCHITECTURE->printable_name;
- if (target_architecture_auto)
- printf_filtered ("The target architecture is set automatically (currently %s)\n", arch);
- else
- printf_filtered ("The target architecture is assumed to be %s\n", arch);
-}
-
-/* Called if the user enters \`\`set architecture'' with or without an
- argument. */
-static void
-set_architecture (char *args, int from_tty)
-{
- if (args == NULL)
- {
- printf_unfiltered ("\"set architecture\" must be followed by \"auto\" or an architecture name.\n");
- }
- else if (strcmp (args, "auto") == 0)
- {
- target_architecture_auto = 1;
- }
- else if (GDB_MULTI_ARCH)
- {
- const struct bfd_arch_info *arch = bfd_scan_arch (args);
- if (arch == NULL)
- printf_unfiltered ("Architecture \`%s' not reconized.\n", args);
- else
- {
- struct gdbarch_info info;
- memset (&info, 0, sizeof info);
- info.bfd_arch_info = arch;
- if (gdbarch_update (info))
- target_architecture_auto = 0;
- else
- printf_unfiltered ("Architecture \`%s' not reconized.\n", args);
- }
- }
- else
- {
- const struct bfd_arch_info *arch = bfd_scan_arch (args);
- if (arch != NULL)
- set_arch (arch, set_arch_manual);
- else
- printf_unfiltered ("Architecture \`%s' not reconized.\n", args);
- }
-}
-
-/* Called if the user enters \`\`info architecture'' without an argument. */
-static void
-info_architecture (char *args, int from_tty)
-{
- enum bfd_architecture a;
- if (GDB_MULTI_ARCH)
- {
- if (gdbarch_init_registrary != NULL)
- {
- struct gdbarch_init_registration *rego;
- printf_filtered ("Available architectures are:\n");
- for (rego = gdbarch_init_registrary;
- rego != NULL;
- rego = rego->next)
- {
- const struct bfd_arch_info *ap;
- ap = bfd_lookup_arch (rego->bfd_architecture, 0);
- if (ap != NULL)
- {
- do
- {
- printf_filtered (" %s", ap->printable_name);
- ap = ap->next;
- }
- while (ap != NULL);
- printf_filtered ("\n");
- }
- }
- }
- else
- {
- printf_filtered ("There are no available architectures.\n");
- }
- return;
- }
- printf_filtered ("Available architectures are:\n");
- for (a = bfd_arch_obscure + 1; a < bfd_arch_last; a++)
- {
- const struct bfd_arch_info *ap = bfd_lookup_arch (a, 0);
- if (ap != NULL)
- {
- do
- {
- printf_filtered (" %s", ap->printable_name);
- ap = ap->next;
- }
- while (ap != NULL);
- printf_filtered ("\n");
- }
- }
-}
-
-/* Set the architecture from arch/machine */
-void
-set_architecture_from_arch_mach (arch, mach)
- enum bfd_architecture arch;
- unsigned long mach;
-{
- const struct bfd_arch_info *wanted = bfd_lookup_arch (arch, mach);
- if (wanted != NULL)
- set_arch (wanted, set_arch_manual);
- else
- internal_error ("gdbarch: hardwired architecture/machine not reconized");
-}
-
-/* Set the architecture from a BFD */
-static void
-set_architecture_from_file (bfd *abfd)
-{
- const struct bfd_arch_info *wanted = bfd_get_arch_info (abfd);
- if (target_architecture_auto)
- {
- set_arch (wanted, set_arch_auto);
- }
- else if (wanted != target_architecture)
- {
- warning ("%s architecture file may be incompatible with %s target.",
- wanted->printable_name,
- target_architecture->printable_name);
- }
-}
-
+ gdbarch_dump (current_gdbarch, gdb_stdlog);
-/* Misc helper functions for targets. */
-
-int
-frame_num_args_unknown (fi)
- struct frame_info *fi;
-{
- return -1;
+ return 1;
}
-int
-generic_register_convertible_not (num)
- int num;
-{
- return 0;
-}
-
-
/* Disassembler */
/* Pointer to the target-dependent disassembly function. */
disassemble_info tm_print_insn_info;
-
-/* Set the dynamic target-system-dependant parameters (architecture,
- byte-order) using information found in the BFD */
-
-void
-set_gdbarch_from_file (abfd)
- bfd *abfd;
-{
- if (GDB_MULTI_ARCH)
- {
- struct gdbarch_info info;
- memset (&info, 0, sizeof info);
- info.abfd = abfd;
- gdbarch_update (info);
- return;
- }
- set_architecture_from_file (abfd);
- set_endian_from_file (abfd);
-}
-
-
-/* Initialize the current architecture. */
-void
-initialize_current_architecture ()
-{
- if (GDB_MULTI_ARCH)
- {
- struct gdbarch_init_registration *rego;
- const struct bfd_arch_info *chosen = NULL;
- for (rego = gdbarch_init_registrary; rego != NULL; rego = rego->next)
- {
- const struct bfd_arch_info *ap
- = bfd_lookup_arch (rego->bfd_architecture, 0);
-
- /* Choose the first architecture alphabetically. */
- if (chosen == NULL
- || strcmp (ap->printable_name, chosen->printable_name) < 0)
- chosen = ap;
- }
-
- if (chosen != NULL)
- {
- struct gdbarch_info info;
- memset (&info, 0, sizeof info);
- info.bfd_arch_info = chosen;
- gdbarch_update (info);
- }
- }
-}
-
extern void _initialize_gdbarch (void);
+
void
_initialize_gdbarch ()
{
struct cmd_list_element *c;
- add_prefix_cmd ("endian", class_support, set_endian,
- "Set endianness of target.",
- &endianlist, "set endian ", 0, &setlist);
- add_cmd ("big", class_support, set_endian_big,
- "Set target as being big endian.", &endianlist);
- add_cmd ("little", class_support, set_endian_little,
- "Set target as being little endian.", &endianlist);
- add_cmd ("auto", class_support, set_endian_auto,
- "Select target endianness automatically.", &endianlist);
- add_cmd ("endian", class_support, show_endian,
- "Show endianness of target.", &showlist);
-
- add_cmd ("architecture", class_support, set_architecture,
- "Set architecture of target.", &setlist);
- add_alias_cmd ("processor", "architecture", class_support, 1, &setlist);
- add_cmd ("architecture", class_support, show_architecture,
- "Show architecture of target.", &showlist);
- add_cmd ("architecture", class_support, info_architecture,
- "List supported target architectures", &infolist);
-
INIT_DISASSEMBLE_INFO_NO_ARCH (tm_print_insn_info, gdb_stdout, (fprintf_ftype)fprintf_filtered);
tm_print_insn_info.flavour = bfd_target_unknown_flavour;
tm_print_insn_info.read_memory_func = dis_asm_read_memory;
projects / deliverable / binutils-gdb.git / blobdiff