# Architecture commands for GDB, the GNU debugger.
#
-# Copyright (C) 1998-2012 Free Software Foundation, Inc.
+# Copyright (C) 1998-2014 Free Software Foundation, Inc.
#
# This file is part of GDB.
#
{
comment=""
class=""
- while read line
+ # On some SH's, 'read' trims leading and trailing whitespace by
+ # default (e.g., bash), while on others (e.g., dash), it doesn't.
+ # Set IFS to empty to disable the trimming everywhere.
+ while IFS='' read line
do
if test "${line}" = ""
then
cat <<EOF
i:const struct bfd_arch_info *:bfd_arch_info:::&bfd_default_arch_struct::::gdbarch_bfd_arch_info (gdbarch)->printable_name
#
-i:int:byte_order:::BFD_ENDIAN_BIG
-i:int:byte_order_for_code:::BFD_ENDIAN_BIG
+i:enum bfd_endian:byte_order:::BFD_ENDIAN_BIG
+i:enum bfd_endian:byte_order_for_code:::BFD_ENDIAN_BIG
#
i:enum gdb_osabi:osabi:::GDB_OSABI_UNKNOWN
#
# use "register_type".
M:struct type *:register_type:int reg_nr:reg_nr
-# See gdbint.texinfo, and PUSH_DUMMY_CALL.
M:struct frame_id:dummy_id:struct frame_info *this_frame:this_frame
# Implement DUMMY_ID and PUSH_DUMMY_CALL, then delete
# deprecated_fp_regnum.
v:int:deprecated_fp_regnum:::-1:-1::0
-# See gdbint.texinfo. See infcall.c.
M:CORE_ADDR:push_dummy_call:struct value *function, struct regcache *regcache, CORE_ADDR bp_addr, int nargs, struct value **args, CORE_ADDR sp, int struct_return, CORE_ADDR struct_addr:function, regcache, bp_addr, nargs, args, sp, struct_return, struct_addr
v:int:call_dummy_location::::AT_ENTRY_POINT::0
M:CORE_ADDR:push_dummy_code:CORE_ADDR sp, CORE_ADDR funaddr, struct value **args, int nargs, struct type *value_type, CORE_ADDR *real_pc, CORE_ADDR *bp_addr, struct regcache *regcache:sp, funaddr, args, nargs, value_type, real_pc, bp_addr, regcache
m:int:register_sim_regno:int reg_nr:reg_nr::legacy_register_sim_regno::0
m:int:cannot_fetch_register:int regnum:regnum::cannot_register_not::0
m:int:cannot_store_register:int regnum:regnum::cannot_register_not::0
-# setjmp/longjmp support.
+
+# Determine the address where a longjmp will land and save this address
+# in PC. Return nonzero on success.
+#
+# FRAME corresponds to the longjmp frame.
F:int:get_longjmp_target:struct frame_info *frame, CORE_ADDR *pc:frame, pc
+
#
v:int:believe_pcc_promotion:::::::
#
f:int:register_to_value:struct frame_info *frame, int regnum, struct type *type, gdb_byte *buf, int *optimizedp, int *unavailablep:frame, regnum, type, buf, optimizedp, unavailablep:0
f:void:value_to_register:struct frame_info *frame, int regnum, struct type *type, const gdb_byte *buf:frame, regnum, type, buf:0
# Construct a value representing the contents of register REGNUM in
-# frame FRAME, interpreted as type TYPE. The routine needs to
+# frame FRAME_ID, interpreted as type TYPE. The routine needs to
# allocate and return a struct value with all value attributes
# (but not the value contents) filled in.
-f:struct value *:value_from_register:struct type *type, int regnum, struct frame_info *frame:type, regnum, frame::default_value_from_register::0
+m:struct value *:value_from_register:struct type *type, int regnum, struct frame_id frame_id:type, regnum, frame_id::default_value_from_register::0
#
m:CORE_ADDR:pointer_to_address:struct type *type, const gdb_byte *buf:type, buf::unsigned_pointer_to_address::0
m:void:address_to_pointer:struct type *type, gdb_byte *buf, CORE_ADDR addr:type, buf, addr::unsigned_address_to_pointer::0
M:CORE_ADDR:integer_to_address:struct type *type, const gdb_byte *buf:type, buf
-# Return the return-value convention that will be used by FUNCTYPE
-# to return a value of type VALTYPE. FUNCTYPE may be NULL in which
+# Return the return-value convention that will be used by FUNCTION
+# to return a value of type VALTYPE. FUNCTION may be NULL in which
# case the return convention is computed based only on VALTYPE.
#
# If READBUF is not NULL, extract the return value and save it in this buffer.
# stored into the appropriate register. This can be used when we want
# to force the value returned by a function (see the "return" command
# for instance).
-M:enum return_value_convention:return_value:struct type *functype, struct type *valtype, struct regcache *regcache, gdb_byte *readbuf, const gdb_byte *writebuf:functype, valtype, regcache, readbuf, writebuf
+M:enum return_value_convention:return_value:struct value *function, struct type *valtype, struct regcache *regcache, gdb_byte *readbuf, const gdb_byte *writebuf:function, valtype, regcache, readbuf, writebuf
+
+# Return true if the return value of function is stored in the first hidden
+# parameter. In theory, this feature should be language-dependent, specified
+# by language and its ABI, such as C++. Unfortunately, compiler may
+# implement it to a target-dependent feature. So that we need such hook here
+# to be aware of this in GDB.
+m:int:return_in_first_hidden_param_p:struct type *type:type::default_return_in_first_hidden_param_p::0
m:CORE_ADDR:skip_prologue:CORE_ADDR ip:ip:0:0
M:CORE_ADDR:skip_main_prologue:CORE_ADDR ip:ip
+# On some platforms, a single function may provide multiple entry points,
+# e.g. one that is used for function-pointer calls and a different one
+# that is used for direct function calls.
+# In order to ensure that breakpoints set on the function will trigger
+# no matter via which entry point the function is entered, a platform
+# may provide the skip_entrypoint callback. It is called with IP set
+# to the main entry point of a function (as determined by the symbol table),
+# and should return the address of the innermost entry point, where the
+# actual breakpoint needs to be set. Note that skip_entrypoint is used
+# by GDB common code even when debugging optimized code, where skip_prologue
+# is not used.
+M:CORE_ADDR:skip_entrypoint:CORE_ADDR ip:ip
+
f:int:inner_than:CORE_ADDR lhs, CORE_ADDR rhs:lhs, rhs:0:0
m:const gdb_byte *:breakpoint_from_pc:CORE_ADDR *pcptr, int *lenptr:pcptr, lenptr::0:
# Return the adjusted address and kind to use for Z0/Z1 packets.
# sort of generic thing to handle alignment or segmentation (it's
# possible it should be in TARGET_READ_PC instead).
m:CORE_ADDR:addr_bits_remove:CORE_ADDR addr:addr::core_addr_identity::0
-# It is not at all clear why gdbarch_smash_text_address is not folded into
-# gdbarch_addr_bits_remove.
-m:CORE_ADDR:smash_text_address:CORE_ADDR addr:addr::core_addr_identity::0
# FIXME/cagney/2001-01-18: This should be split in two. A target method that
# indicates if the target needs software single step. An ISA method to
# FIXME/cagney/2001-01-18: The logic is backwards. It should be asking if the
# target can single step. If not, then implement single step using breakpoints.
#
-# A return value of 1 means that the software_single_step breakpoints
+# A return value of 1 means that the software_single_step breakpoints
# were inserted; 0 means they were not.
F:int:software_single_step:struct frame_info *frame:frame
# a step-resume breakpoint to get us past the dynamic linker.
m:CORE_ADDR:skip_solib_resolver:CORE_ADDR pc:pc::generic_skip_solib_resolver::0
# Some systems also have trampoline code for returning from shared libs.
-m:int:in_solib_return_trampoline:CORE_ADDR pc, char *name:pc, name::generic_in_solib_return_trampoline::0
+m:int:in_solib_return_trampoline:CORE_ADDR pc, const char *name:pc, name::generic_in_solib_return_trampoline::0
# A target might have problems with watchpoints as soon as the stack
# frame of the current function has been destroyed. This mostly happens
# which don't suffer from that problem could just let this functionality
# untouched.
m:int:in_function_epilogue_p:CORE_ADDR addr:addr:0:generic_in_function_epilogue_p::0
-f:void:elf_make_msymbol_special:asymbol *sym, struct minimal_symbol *msym:sym, msym::default_elf_make_msymbol_special::0
+# Process an ELF symbol in the minimal symbol table in a backend-specific
+# way. Normally this hook is supposed to do nothing, however if required,
+# then this hook can be used to apply tranformations to symbols that are
+# considered special in some way. For example the MIPS backend uses it
+# to interpret \`st_other' information to mark compressed code symbols so
+# that they can be treated in the appropriate manner in the processing of
+# the main symbol table and DWARF-2 records.
+F:void:elf_make_msymbol_special:asymbol *sym, struct minimal_symbol *msym:sym, msym
f:void:coff_make_msymbol_special:int val, struct minimal_symbol *msym:val, msym::default_coff_make_msymbol_special::0
+# Process a symbol in the main symbol table in a backend-specific way.
+# Normally this hook is supposed to do nothing, however if required,
+# then this hook can be used to apply tranformations to symbols that
+# are considered special in some way. This is currently used by the
+# MIPS backend to make sure compressed code symbols have the ISA bit
+# set. This in turn is needed for symbol values seen in GDB to match
+# the values used at the runtime by the program itself, for function
+# and label references.
+f:void:make_symbol_special:struct symbol *sym, struct objfile *objfile:sym, objfile::default_make_symbol_special::0
+# Adjust the address retrieved from a DWARF-2 record other than a line
+# entry in a backend-specific way. Normally this hook is supposed to
+# return the address passed unchanged, however if that is incorrect for
+# any reason, then this hook can be used to fix the address up in the
+# required manner. This is currently used by the MIPS backend to make
+# sure addresses in FDE, range records, etc. referring to compressed
+# code have the ISA bit set, matching line information and the symbol
+# table.
+f:CORE_ADDR:adjust_dwarf2_addr:CORE_ADDR pc:pc::default_adjust_dwarf2_addr::0
+# Adjust the address updated by a line entry in a backend-specific way.
+# Normally this hook is supposed to return the address passed unchanged,
+# however in the case of inconsistencies in these records, this hook can
+# be used to fix them up in the required manner. This is currently used
+# by the MIPS backend to make sure all line addresses in compressed code
+# are presented with the ISA bit set, which is not always the case. This
+# in turn ensures breakpoint addresses are correctly matched against the
+# stop PC.
+f:CORE_ADDR:adjust_dwarf2_line:CORE_ADDR addr, int rel:addr, rel::default_adjust_dwarf2_line::0
v:int:cannot_step_breakpoint:::0:0::0
v:int:have_nonsteppable_watchpoint:::0:0::0
F:int:address_class_type_flags:int byte_size, int dwarf2_addr_class:byte_size, dwarf2_addr_class
M:const char *:address_class_type_flags_to_name:int type_flags:type_flags
+
+# Return the appropriate type_flags for the supplied address class.
+# This function should return 1 if the address class was recognized and
+# type_flags was set, zero otherwise.
M:int:address_class_name_to_type_flags:const char *name, int *type_flags_ptr:name, type_flags_ptr
# Is a register in a group
m:int:register_reggroup_p:int regnum, struct reggroup *reggroup:regnum, reggroup::default_register_reggroup_p::0
# Fetch the pointer to the ith function argument.
F:CORE_ADDR:fetch_pointer_argument:struct frame_info *frame, int argi, struct type *type:frame, argi, type
-# Return the appropriate register set for a core file section with
-# name SECT_NAME and size SECT_SIZE.
-M:const struct regset *:regset_from_core_section:const char *sect_name, size_t sect_size:sect_name, sect_size
+# Iterate over all supported register notes in a core file. For each
+# supported register note section, the iterator must call CB and pass
+# CB_DATA unchanged. If REGCACHE is not NULL, the iterator can limit
+# the supported register note sections based on the current register
+# values. Otherwise it should enumerate all supported register note
+# sections.
+M:void:iterate_over_regset_sections:iterate_over_regset_sections_cb *cb, void *cb_data, const struct regcache *regcache:cb, cb_data, regcache
+
+# Create core file notes
+M:char *:make_corefile_notes:bfd *obfd, int *note_size:obfd, note_size
-# Supported register notes in a core file.
-v:struct core_regset_section *:core_regset_sections:const char *name, int len::::::host_address_to_string (gdbarch->core_regset_sections)
+# The elfcore writer hook to use to write Linux prpsinfo notes to core
+# files. Most Linux architectures use the same prpsinfo32 or
+# prpsinfo64 layouts, and so won't need to provide this hook, as we
+# call the Linux generic routines in bfd to write prpsinfo notes by
+# default.
+F:char *:elfcore_write_linux_prpsinfo:bfd *obfd, char *note_data, int *note_size, const struct elf_internal_linux_prpsinfo *info:obfd, note_data, note_size, info
+
+# Find core file memory regions
+M:int:find_memory_regions:find_memory_region_ftype func, void *data:func, data
# Read offset OFFSET of TARGET_OBJECT_LIBRARIES formatted shared libraries list from
-# core file into buffer READBUF with length LEN.
-M:LONGEST:core_xfer_shared_libraries:gdb_byte *readbuf, ULONGEST offset, LONGEST len:readbuf, offset, len
+# core file into buffer READBUF with length LEN. Return the number of bytes read
+# (zero indicates failure).
+# failed, otherwise, return the red length of READBUF.
+M:ULONGEST:core_xfer_shared_libraries:gdb_byte *readbuf, ULONGEST offset, ULONGEST len:readbuf, offset, len
+
+# Read offset OFFSET of TARGET_OBJECT_LIBRARIES_AIX formatted shared
+# libraries list from core file into buffer READBUF with length LEN.
+# Return the number of bytes read (zero indicates failure).
+M:ULONGEST:core_xfer_shared_libraries_aix:gdb_byte *readbuf, ULONGEST offset, ULONGEST len:readbuf, offset, len
# How the core target converts a PTID from a core file to a string.
M:char *:core_pid_to_str:ptid_t ptid:ptid
v:int:vbit_in_delta:::0:0::0
# Advance PC to next instruction in order to skip a permanent breakpoint.
-F:void:skip_permanent_breakpoint:struct regcache *regcache:regcache
+f:void:skip_permanent_breakpoint:struct regcache *regcache:regcache:default_skip_permanent_breakpoint:default_skip_permanent_breakpoint::0
# The maximum length of an instruction on this architecture in bytes.
V:ULONGEST:max_insn_length:::0:0
M:const struct target_desc *:core_read_description:struct target_ops *target, bfd *abfd:target, abfd
# Handle special encoding of static variables in stabs debug info.
-F:char *:static_transform_name:char *name:name
+F:const char *:static_transform_name:const char *name:name
# Set if the address in N_SO or N_FUN stabs may be zero.
v:int:sofun_address_maybe_missing:::0:0::0
# Save process state after a signal.
# Return -1 if something goes wrong, 0 otherwise.
-M:int:process_record_signal:struct regcache *regcache, enum target_signal signal:regcache, signal
-
-# Signal translation: translate inferior's signal (host's) number into
-# GDB's representation.
-m:enum target_signal:target_signal_from_host:int signo:signo::default_target_signal_from_host::0
-# Signal translation: translate GDB's signal number into inferior's host
-# signal number.
-m:int:target_signal_to_host:enum target_signal ts:ts::default_target_signal_to_host::0
+M:int:process_record_signal:struct regcache *regcache, enum gdb_signal signal:regcache, signal
+
+# Signal translation: translate inferior's signal (target's) number
+# into GDB's representation. The implementation of this method must
+# be host independent. IOW, don't rely on symbols of the NAT_FILE
+# header (the nm-*.h files), the host <signal.h> header, or similar
+# headers. This is mainly used when cross-debugging core files ---
+# "Live" targets hide the translation behind the target interface
+# (target_wait, target_resume, etc.).
+M:enum gdb_signal:gdb_signal_from_target:int signo:signo
+
+# Signal translation: translate the GDB's internal signal number into
+# the inferior's signal (target's) representation. The implementation
+# of this method must be host independent. IOW, don't rely on symbols
+# of the NAT_FILE header (the nm-*.h files), the host <signal.h>
+# header, or similar headers.
+# Return the target signal number if found, or -1 if the GDB internal
+# signal number is invalid.
+M:int:gdb_signal_to_target:enum gdb_signal signal:signal
# Extra signal info inspection.
#
# Get architecture-specific system calls information from registers.
M:LONGEST:get_syscall_number:ptid_t ptid:ptid
+# The filename of the XML syscall for this architecture.
+v:const char *:xml_syscall_file:::0:0::0:pstring (gdbarch->xml_syscall_file)
+
+# Information about system calls from this architecture
+v:struct syscalls_info *:syscalls_info:::0:0::0:host_address_to_string (gdbarch->syscalls_info)
+
+# SystemTap related fields and functions.
+
+# A NULL-terminated array of prefixes used to mark an integer constant
+# on the architecture's assembly.
+# For example, on x86 integer constants are written as:
+#
+# \$10 ;; integer constant 10
+#
+# in this case, this prefix would be the character \`\$\'.
+v:const char *const *:stap_integer_prefixes:::0:0::0:pstring_list (gdbarch->stap_integer_prefixes)
+
+# A NULL-terminated array of suffixes used to mark an integer constant
+# on the architecture's assembly.
+v:const char *const *:stap_integer_suffixes:::0:0::0:pstring_list (gdbarch->stap_integer_suffixes)
+
+# A NULL-terminated array of prefixes used to mark a register name on
+# the architecture's assembly.
+# For example, on x86 the register name is written as:
+#
+# \%eax ;; register eax
+#
+# in this case, this prefix would be the character \`\%\'.
+v:const char *const *:stap_register_prefixes:::0:0::0:pstring_list (gdbarch->stap_register_prefixes)
+
+# A NULL-terminated array of suffixes used to mark a register name on
+# the architecture's assembly.
+v:const char *const *:stap_register_suffixes:::0:0::0:pstring_list (gdbarch->stap_register_suffixes)
+
+# A NULL-terminated array of prefixes used to mark a register
+# indirection on the architecture's assembly.
+# For example, on x86 the register indirection is written as:
+#
+# \(\%eax\) ;; indirecting eax
+#
+# in this case, this prefix would be the charater \`\(\'.
+#
+# Please note that we use the indirection prefix also for register
+# displacement, e.g., \`4\(\%eax\)\' on x86.
+v:const char *const *:stap_register_indirection_prefixes:::0:0::0:pstring_list (gdbarch->stap_register_indirection_prefixes)
+
+# A NULL-terminated array of suffixes used to mark a register
+# indirection on the architecture's assembly.
+# For example, on x86 the register indirection is written as:
+#
+# \(\%eax\) ;; indirecting eax
+#
+# in this case, this prefix would be the charater \`\)\'.
+#
+# Please note that we use the indirection suffix also for register
+# displacement, e.g., \`4\(\%eax\)\' on x86.
+v:const char *const *:stap_register_indirection_suffixes:::0:0::0:pstring_list (gdbarch->stap_register_indirection_suffixes)
+
+# Prefix(es) used to name a register using GDB's nomenclature.
+#
+# For example, on PPC a register is represented by a number in the assembly
+# language (e.g., \`10\' is the 10th general-purpose register). However,
+# inside GDB this same register has an \`r\' appended to its name, so the 10th
+# register would be represented as \`r10\' internally.
+v:const char *:stap_gdb_register_prefix:::0:0::0:pstring (gdbarch->stap_gdb_register_prefix)
+
+# Suffix used to name a register using GDB's nomenclature.
+v:const char *:stap_gdb_register_suffix:::0:0::0:pstring (gdbarch->stap_gdb_register_suffix)
+
+# Check if S is a single operand.
+#
+# Single operands can be:
+# \- Literal integers, e.g. \`\$10\' on x86
+# \- Register access, e.g. \`\%eax\' on x86
+# \- Register indirection, e.g. \`\(\%eax\)\' on x86
+# \- Register displacement, e.g. \`4\(\%eax\)\' on x86
+#
+# This function should check for these patterns on the string
+# and return 1 if some were found, or zero otherwise. Please try to match
+# as much info as you can from the string, i.e., if you have to match
+# something like \`\(\%\', do not match just the \`\(\'.
+M:int:stap_is_single_operand:const char *s:s
+
+# Function used to handle a "special case" in the parser.
+#
+# A "special case" is considered to be an unknown token, i.e., a token
+# that the parser does not know how to parse. A good example of special
+# case would be ARM's register displacement syntax:
+#
+# [R0, #4] ;; displacing R0 by 4
+#
+# Since the parser assumes that a register displacement is of the form:
+#
+# <number> <indirection_prefix> <register_name> <indirection_suffix>
+#
+# it means that it will not be able to recognize and parse this odd syntax.
+# Therefore, we should add a special case function that will handle this token.
+#
+# This function should generate the proper expression form of the expression
+# using GDB\'s internal expression mechanism (e.g., \`write_exp_elt_opcode\'
+# and so on). It should also return 1 if the parsing was successful, or zero
+# if the token was not recognized as a special token (in this case, returning
+# zero means that the special parser is deferring the parsing to the generic
+# parser), and should advance the buffer pointer (p->arg).
+M:int:stap_parse_special_token:struct stap_parse_info *p:p
+
+
# True if the list of shared libraries is one and only for all
# processes, as opposed to a list of shared libraries per inferior.
# This usually means that all processes, although may or may not share
# places that the return address may be found.
m:void:gen_return_address:struct agent_expr *ax, struct axs_value *value, CORE_ADDR scope:ax, value, scope::default_gen_return_address::0
+# Implement the "info proc" command.
+M:void:info_proc:const char *args, enum info_proc_what what:args, what
+
+# Implement the "info proc" command for core files. Noe that there
+# are two "info_proc"-like methods on gdbarch -- one for core files,
+# one for live targets.
+M:void:core_info_proc:const char *args, enum info_proc_what what:args, what
+
+# Iterate over all objfiles in the order that makes the most sense
+# for the architecture to make global symbol searches.
+#
+# CB is a callback function where OBJFILE is the objfile to be searched,
+# and CB_DATA a pointer to user-defined data (the same data that is passed
+# when calling this gdbarch method). The iteration stops if this function
+# returns nonzero.
+#
+# CB_DATA is a pointer to some user-defined data to be passed to
+# the callback.
+#
+# If not NULL, CURRENT_OBJFILE corresponds to the objfile being
+# inspected when the symbol search was requested.
+m:void:iterate_over_objfiles_in_search_order:iterate_over_objfiles_in_search_order_cb_ftype *cb, void *cb_data, struct objfile *current_objfile:cb, cb_data, current_objfile:0:default_iterate_over_objfiles_in_search_order::0
+
+# Ravenscar arch-dependent ops.
+v:struct ravenscar_arch_ops *:ravenscar_ops:::NULL:NULL::0:host_address_to_string (gdbarch->ravenscar_ops)
+
+# Return non-zero if the instruction at ADDR is a call; zero otherwise.
+m:int:insn_is_call:CORE_ADDR addr:addr::default_insn_is_call::0
+
+# Return non-zero if the instruction at ADDR is a return; zero otherwise.
+m:int:insn_is_ret:CORE_ADDR addr:addr::default_insn_is_ret::0
+
+# Return non-zero if the instruction at ADDR is a jump; zero otherwise.
+m:int:insn_is_jump:CORE_ADDR addr:addr::default_insn_is_jump::0
+
+# Read one auxv entry from *READPTR, not reading locations >= ENDPTR.
+# Return 0 if *READPTR is already at the end of the buffer.
+# Return -1 if there is insufficient buffer for a whole entry.
+# Return 1 if an entry was read into *TYPEP and *VALP.
+M:int:auxv_parse:gdb_byte **readptr, gdb_byte *endptr, CORE_ADDR *typep, CORE_ADDR *valp:readptr, endptr, typep, valp
+
+# Find the address range of the current inferior's vsyscall/vDSO, and
+# write it to *RANGE. If the vsyscall's length can't be determined, a
+# range with zero length is returned. Returns true if the vsyscall is
+# found, false otherwise.
+m:int:vsyscall_range:struct mem_range *range:range::default_vsyscall_range::0
+
+# Allocate SIZE bytes of PROT protected page aligned memory in inferior.
+# PROT has GDB_MMAP_PROT_* bitmask format.
+# Throw an error if it is not possible. Returned address is always valid.
+f:CORE_ADDR:infcall_mmap:CORE_ADDR size, unsigned prot:size, prot::default_infcall_mmap::0
+
+# Return string (caller has to use xfree for it) with options for GCC
+# to produce code for this target, typically "-m64", "-m32" or "-m31".
+# These options are put before CU's DW_AT_producer compilation options so that
+# they can override it. Method may also return NULL.
+m:char *:gcc_target_options:void:::default_gcc_target_options::0
+
+# Return a regular expression that matches names used by this
+# architecture in GNU configury triplets. The result is statically
+# allocated and must not be freed. The default implementation simply
+# returns the BFD architecture name, which is correct in nearly every
+# case.
+m:const char *:gnu_triplet_regexp:void:::default_gnu_triplet_regexp::0
EOF
}
copyright ()
{
cat <<EOF
-/* *INDENT-OFF* */ /* THIS FILE IS GENERATED */
+/* *INDENT-OFF* */ /* THIS FILE IS GENERATED -*- buffer-read-only: t -*- */
+/* vi:set ro: */
/* Dynamic architecture support for GDB, the GNU debugger.
- Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
- 2007, 2008, 2009 Free Software Foundation, Inc.
+ Copyright (C) 1998-2014 Free Software Foundation, Inc.
This file is part of GDB.
#ifndef GDBARCH_H
#define GDBARCH_H
+#include "frame.h"
+
struct floatformat;
struct ui_file;
-struct frame_info;
struct value;
struct objfile;
struct obj_section;
struct obstack;
struct bp_target_info;
struct target_desc;
+struct objfile;
+struct symbol;
struct displaced_step_closure;
struct core_regset_section;
struct syscall;
struct agent_expr;
struct axs_value;
-
-/* The architecture associated with the connection to the target.
-
- The architecture vector provides some information that is really
- a property of the target: The layout of certain packets, for instance;
- or the solib_ops vector. Etc. To differentiate architecture accesses
- to per-target properties from per-thread/per-frame/per-objfile properties,
- accesses to per-target properties should be made through target_gdbarch.
-
- Eventually, when support for multiple targets is implemented in
- GDB, this global should be made target-specific. */
-extern struct gdbarch *target_gdbarch;
+struct stap_parse_info;
+struct ravenscar_arch_ops;
+struct elf_internal_linux_prpsinfo;
+struct mem_range;
+struct syscalls_info;
+
+/* The architecture associated with the inferior through the
+ connection to the target.
+
+ The architecture vector provides some information that is really a
+ property of the inferior, accessed through a particular target:
+ ptrace operations; the layout of certain RSP packets; the solib_ops
+ vector; etc. To differentiate architecture accesses to
+ per-inferior/target properties from
+ per-thread/per-frame/per-objfile properties, accesses to
+ per-inferior/target properties should be made through this
+ gdbarch. */
+
+/* This is a convenience wrapper for 'current_inferior ()->gdbarch'. */
+extern struct gdbarch *target_gdbarch (void);
+
+/* Callback type for the 'iterate_over_objfiles_in_search_order'
+ gdbarch method. */
+
+typedef int (iterate_over_objfiles_in_search_order_cb_ftype)
+ (struct objfile *objfile, void *cb_data);
+
+typedef void (iterate_over_regset_sections_cb)
+ (const char *sect_name, int size, const struct regset *regset,
+ const char *human_name, void *cb_data);
EOF
# function typedef's
const struct bfd_arch_info *bfd_arch_info;
/* Use default: BFD_ENDIAN_UNKNOWN (NB: is not ZERO). */
- int byte_order;
+ enum bfd_endian byte_order;
- int byte_order_for_code;
+ enum bfd_endian byte_order_for_code;
/* Use default: NULL (ZERO). */
bfd *abfd;
extern struct gdbarch *gdbarch_find_by_info (struct gdbarch_info info);
-/* Helper function. Set the global "target_gdbarch" to "gdbarch".
-
- FIXME: kettenis/20031124: Of the functions that follow, only
- gdbarch_from_bfd is supposed to survive. The others will
- dissappear since in the future GDB will (hopefully) be truly
- multi-arch. However, for now we're still stuck with the concept of
- a single active architecture. */
+/* Helper function. Set the target gdbarch to "gdbarch". */
-extern void deprecated_target_gdbarch_select_hack (struct gdbarch *gdbarch);
+extern void set_target_gdbarch (struct gdbarch *gdbarch);
/* Register per-architecture data-pointer.
extern void initialize_current_architecture (void);
/* gdbarch trace variable */
-extern int gdbarch_debug;
+extern unsigned int gdbarch_debug;
extern void gdbarch_dump (struct gdbarch *gdbarch, struct ui_file *file);
#include "symcat.h"
#include "floatformat.h"
-
-#include "gdb_assert.h"
-#include "gdb_string.h"
#include "reggroups.h"
#include "osabi.h"
#include "gdb_obstack.h"
#include "observer.h"
#include "regcache.h"
+#include "objfiles.h"
/* Static function declarations */
#ifndef GDBARCH_DEBUG
#define GDBARCH_DEBUG 0
#endif
-int gdbarch_debug = GDBARCH_DEBUG;
+unsigned int gdbarch_debug = GDBARCH_DEBUG;
static void
show_gdbarch_debug (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
return string;
}
+/* Helper function to print a list of strings, represented as "const
+ char *const *". The list is printed comma-separated. */
+
+static char *
+pstring_list (const char *const *list)
+{
+ static char ret[100];
+ const char *const *p;
+ size_t offset = 0;
+
+ if (list == NULL)
+ return "(null)";
+
+ ret[0] = '\0';
+ for (p = list; *p != NULL && offset < sizeof (ret); ++p)
+ {
+ size_t s = xsnprintf (ret + offset, sizeof (ret) - offset, "%s, ", *p);
+ offset += 2 + s;
+ }
+
+ if (offset > 0)
+ {
+ gdb_assert (offset - 2 < sizeof (ret));
+ ret[offset - 2] = '\0';
+ }
+
+ return ret;
+}
+
EOF
# gdbarch open the gdbarch object
printf " unsigned nr_data;\n"
printf " void **data;\n"
printf "\n"
-printf " /* per-architecture swap-regions. */\n"
-printf " struct gdbarch_swap *swap;\n"
-printf "\n"
cat <<EOF
/* Multi-arch values.
gdbarch_dump(): Add a fprintf_unfiltered call so that the new
field is dumped out
- \`\`startup_gdbarch()'': Append an initial value to the static
- variable (base values on the host's c-type system).
-
get_gdbarch(): Implement the set/get functions (probably using
the macro's as shortcuts).
done
printf "};\n"
-# A pre-initialized vector
-printf "\n"
-printf "\n"
-cat <<EOF
-/* The default architecture uses host values (for want of a better
- choice). */
-EOF
-printf "\n"
-printf "extern const struct bfd_arch_info bfd_default_arch_struct;\n"
-printf "\n"
-printf "struct gdbarch startup_gdbarch =\n"
-printf "{\n"
-printf " 1, /* Always initialized. */\n"
-printf " NULL, /* The obstack. */\n"
-printf " /* basic architecture information. */\n"
-function_list | while do_read
-do
- if class_is_info_p
- then
- printf " ${staticdefault}, /* ${function} */\n"
- fi
-done
-cat <<EOF
- /* target specific vector and its dump routine. */
- NULL, NULL,
- /*per-architecture data-pointers and swap regions. */
- 0, NULL, NULL,
- /* Multi-arch values */
-EOF
-function_list | while do_read
-do
- if class_is_function_p || class_is_variable_p
- then
- printf " ${staticdefault}, /* ${function} */\n"
- fi
-done
-cat <<EOF
- /* startup_gdbarch() */
-};
-
-struct gdbarch *target_gdbarch = &startup_gdbarch;
-EOF
-
# Create a new gdbarch struct
cat <<EOF
/* Create an obstack for allocating all the per-architecture memory,
then use that to allocate the architecture vector. */
- struct obstack *obstack = XMALLOC (struct obstack);
+ struct obstack *obstack = XNEW (struct obstack);
obstack_init (obstack);
gdbarch = obstack_alloc (obstack, sizeof (*gdbarch));
memset (gdbarch, 0, sizeof (*gdbarch));
for (curr = &gdbarch_data_registry.registrations;
(*curr) != NULL;
curr = &(*curr)->next);
- (*curr) = XMALLOC (struct gdbarch_data_registration);
+ (*curr) = XNEW (struct gdbarch_data_registration);
(*curr)->next = NULL;
- (*curr)->data = XMALLOC (struct gdbarch_data);
+ (*curr)->data = XNEW (struct gdbarch_data);
(*curr)->data->index = gdbarch_data_registry.nr++;
(*curr)->data->pre_init = pre_init;
(*curr)->data->post_init = post_init;
bfd_arch_info->printable_name,
host_address_to_string (init));
/* Append it */
- (*curr) = XMALLOC (struct gdbarch_registration);
+ (*curr) = XNEW (struct gdbarch_registration);
(*curr)->bfd_architecture = bfd_architecture;
(*curr)->init = init;
(*curr)->dump_tdep = dump_tdep;
/* Insert the new architecture into the front of the architecture
list (keep the list sorted Most Recently Used). */
{
- struct gdbarch_list *this = XMALLOC (struct gdbarch_list);
+ struct gdbarch_list *this = XNEW (struct gdbarch_list);
this->next = rego->arches;
this->gdbarch = new_gdbarch;
rego->arches = this;
/* Make the specified architecture current. */
void
-deprecated_target_gdbarch_select_hack (struct gdbarch *new_gdbarch)
+set_target_gdbarch (struct gdbarch *new_gdbarch)
{
gdb_assert (new_gdbarch != NULL);
gdb_assert (new_gdbarch->initialized_p);
- target_gdbarch = new_gdbarch;
+ current_inferior ()->gdbarch = new_gdbarch;
observer_notify_architecture_changed (new_gdbarch);
registers_changed ();
}
+/* Return the current inferior's arch. */
+
+struct gdbarch *
+target_gdbarch (void)
+{
+ return current_inferior ()->gdbarch;
+}
+
extern void _initialize_gdbarch (void);
void
_initialize_gdbarch (void)
{
- add_setshow_zinteger_cmd ("arch", class_maintenance, &gdbarch_debug, _("\\
+ add_setshow_zuinteger_cmd ("arch", class_maintenance, &gdbarch_debug, _("\\
Set architecture debugging."), _("\\
Show architecture debugging."), _("\\
When non-zero, architecture debugging is enabled."),