# Architecture commands for GDB, the GNU debugger.
#
-# Copyright (C) 1998-2014 Free Software Foundation, Inc.
+# Copyright (C) 1998-2015 Free Software Foundation, Inc.
#
# This file is part of GDB.
#
M:CORE_ADDR:push_dummy_code:CORE_ADDR sp, CORE_ADDR funaddr, struct value **args, int nargs, struct type *value_type, CORE_ADDR *real_pc, CORE_ADDR *bp_addr, struct regcache *regcache:sp, funaddr, args, nargs, value_type, real_pc, bp_addr, regcache
m:void:print_registers_info:struct ui_file *file, struct frame_info *frame, int regnum, int all:file, frame, regnum, all::default_print_registers_info::0
-M:void:print_float_info:struct ui_file *file, struct frame_info *frame, const char *args:file, frame, args
+m:void:print_float_info:struct ui_file *file, struct frame_info *frame, const char *args:file, frame, args::default_print_float_info::0
M:void:print_vector_info:struct ui_file *file, struct frame_info *frame, const char *args:file, frame, args
# MAP a GDB RAW register number onto a simulator register number. See
# also include/...-sim.h.
# A target might have problems with watchpoints as soon as the stack
# frame of the current function has been destroyed. This mostly happens
-# as the first action in a funtion's epilogue. in_function_epilogue_p()
+# as the first action in a function's epilogue. stack_frame_destroyed_p()
# is defined to return a non-zero value if either the given addr is one
# instruction after the stack destroying instruction up to the trailing
# return instruction or if we can figure out that the stack frame has
# already been invalidated regardless of the value of addr. Targets
# which don't suffer from that problem could just let this functionality
# untouched.
-m:int:in_function_epilogue_p:CORE_ADDR addr:addr:0:generic_in_function_epilogue_p::0
-f:void:elf_make_msymbol_special:asymbol *sym, struct minimal_symbol *msym:sym, msym::default_elf_make_msymbol_special::0
+m:int:stack_frame_destroyed_p:CORE_ADDR addr:addr:0:generic_stack_frame_destroyed_p::0
+# Process an ELF symbol in the minimal symbol table in a backend-specific
+# way. Normally this hook is supposed to do nothing, however if required,
+# then this hook can be used to apply tranformations to symbols that are
+# considered special in some way. For example the MIPS backend uses it
+# to interpret \`st_other' information to mark compressed code symbols so
+# that they can be treated in the appropriate manner in the processing of
+# the main symbol table and DWARF-2 records.
+F:void:elf_make_msymbol_special:asymbol *sym, struct minimal_symbol *msym:sym, msym
f:void:coff_make_msymbol_special:int val, struct minimal_symbol *msym:val, msym::default_coff_make_msymbol_special::0
+# Process a symbol in the main symbol table in a backend-specific way.
+# Normally this hook is supposed to do nothing, however if required,
+# then this hook can be used to apply tranformations to symbols that
+# are considered special in some way. This is currently used by the
+# MIPS backend to make sure compressed code symbols have the ISA bit
+# set. This in turn is needed for symbol values seen in GDB to match
+# the values used at the runtime by the program itself, for function
+# and label references.
+f:void:make_symbol_special:struct symbol *sym, struct objfile *objfile:sym, objfile::default_make_symbol_special::0
+# Adjust the address retrieved from a DWARF-2 record other than a line
+# entry in a backend-specific way. Normally this hook is supposed to
+# return the address passed unchanged, however if that is incorrect for
+# any reason, then this hook can be used to fix the address up in the
+# required manner. This is currently used by the MIPS backend to make
+# sure addresses in FDE, range records, etc. referring to compressed
+# code have the ISA bit set, matching line information and the symbol
+# table.
+f:CORE_ADDR:adjust_dwarf2_addr:CORE_ADDR pc:pc::default_adjust_dwarf2_addr::0
+# Adjust the address updated by a line entry in a backend-specific way.
+# Normally this hook is supposed to return the address passed unchanged,
+# however in the case of inconsistencies in these records, this hook can
+# be used to fix them up in the required manner. This is currently used
+# by the MIPS backend to make sure all line addresses in compressed code
+# are presented with the ISA bit set, which is not always the case. This
+# in turn ensures breakpoint addresses are correctly matched against the
+# stop PC.
+f:CORE_ADDR:adjust_dwarf2_line:CORE_ADDR addr, int rel:addr, rel::default_adjust_dwarf2_line::0
v:int:cannot_step_breakpoint:::0:0::0
v:int:have_nonsteppable_watchpoint:::0:0::0
F:int:address_class_type_flags:int byte_size, int dwarf2_addr_class:byte_size, dwarf2_addr_class
v:int:vbit_in_delta:::0:0::0
# Advance PC to next instruction in order to skip a permanent breakpoint.
-F:void:skip_permanent_breakpoint:struct regcache *regcache:regcache
+f:void:skip_permanent_breakpoint:struct regcache *regcache:regcache:default_skip_permanent_breakpoint:default_skip_permanent_breakpoint::0
# The maximum length of an instruction on this architecture in bytes.
V:ULONGEST:max_insn_length:::0:0
# If your architecture doesn't need to adjust instructions before
# single-stepping them, consider using simple_displaced_step_copy_insn
# here.
+#
+# If the instruction cannot execute out of line, return NULL. The
+# core falls back to stepping past the instruction in-line instead in
+# that case.
M:struct displaced_step_closure *:displaced_step_copy_insn:CORE_ADDR from, CORE_ADDR to, struct regcache *regs:from, to, regs
# Return true if GDB should use hardware single-stepping to execute
# Get architecture-specific system calls information from registers.
M:LONGEST:get_syscall_number:ptid_t ptid:ptid
+# The filename of the XML syscall for this architecture.
+v:const char *:xml_syscall_file:::0:0::0:pstring (gdbarch->xml_syscall_file)
+
+# Information about system calls from this architecture
+v:struct syscalls_info *:syscalls_info:::0:0::0:host_address_to_string (gdbarch->syscalls_info)
+
# SystemTap related fields and functions.
# A NULL-terminated array of prefixes used to mark an integer constant
# parser), and should advance the buffer pointer (p->arg).
M:int:stap_parse_special_token:struct stap_parse_info *p:p
+# DTrace related functions.
+
+# The expression to compute the NARTGth+1 argument to a DTrace USDT probe.
+# NARG must be >= 0.
+M:void:dtrace_parse_probe_argument:struct parser_state *pstate, int narg:pstate, narg
+
+# True if the given ADDR does not contain the instruction sequence
+# corresponding to a disabled DTrace is-enabled probe.
+M:int:dtrace_probe_is_enabled:CORE_ADDR addr:addr
+
+# Enable a DTrace is-enabled probe at ADDR.
+M:void:dtrace_enable_probe:CORE_ADDR addr:addr
+
+# Disable a DTrace is-enabled probe at ADDR.
+M:void:dtrace_disable_probe:CORE_ADDR addr:addr
# True if the list of shared libraries is one and only for all
# processes, as opposed to a list of shared libraries per inferior.
m:int:has_shared_address_space:void:::default_has_shared_address_space::0
# True if a fast tracepoint can be set at an address.
-m:int:fast_tracepoint_valid_at:CORE_ADDR addr, int *isize, char **msg:addr, isize, msg::default_fast_tracepoint_valid_at::0
+m:int:fast_tracepoint_valid_at:CORE_ADDR addr, char **msg:addr, msg::default_fast_tracepoint_valid_at::0
# Return the "auto" target charset.
f:const char *:auto_charset:void::default_auto_charset:default_auto_charset::0
# range with zero length is returned. Returns true if the vsyscall is
# found, false otherwise.
m:int:vsyscall_range:struct mem_range *range:range::default_vsyscall_range::0
+
+# Allocate SIZE bytes of PROT protected page aligned memory in inferior.
+# PROT has GDB_MMAP_PROT_* bitmask format.
+# Throw an error if it is not possible. Returned address is always valid.
+f:CORE_ADDR:infcall_mmap:CORE_ADDR size, unsigned prot:size, prot::default_infcall_mmap::0
+
+# Deallocate SIZE bytes of memory at ADDR in inferior from gdbarch_infcall_mmap.
+# Print a warning if it is not possible.
+f:void:infcall_munmap:CORE_ADDR addr, CORE_ADDR size:addr, size::default_infcall_munmap::0
+
+# Return string (caller has to use xfree for it) with options for GCC
+# to produce code for this target, typically "-m64", "-m32" or "-m31".
+# These options are put before CU's DW_AT_producer compilation options so that
+# they can override it. Method may also return NULL.
+m:char *:gcc_target_options:void:::default_gcc_target_options::0
+
+# Return a regular expression that matches names used by this
+# architecture in GNU configury triplets. The result is statically
+# allocated and must not be freed. The default implementation simply
+# returns the BFD architecture name, which is correct in nearly every
+# case.
+m:const char *:gnu_triplet_regexp:void:::default_gnu_triplet_regexp::0
+
+# Return the size in 8-bit bytes of an addressable memory unit on this
+# architecture. This corresponds to the number of 8-bit bytes associated to
+# each address in memory.
+m:int:addressable_memory_unit_size:void:::default_addressable_memory_unit_size::0
+
EOF
}
/* Dynamic architecture support for GDB, the GNU debugger.
- Copyright (C) 1998-2014 Free Software Foundation, Inc.
+ Copyright (C) 1998-2015 Free Software Foundation, Inc.
This file is part of GDB.
struct obstack;
struct bp_target_info;
struct target_desc;
+struct objfile;
+struct symbol;
struct displaced_step_closure;
-struct core_regset_section;
struct syscall;
struct agent_expr;
struct axs_value;
struct stap_parse_info;
+struct parser_state;
struct ravenscar_arch_ops;
struct elf_internal_linux_prpsinfo;
struct mem_range;
+struct syscalls_info;
+
+#include "regcache.h"
/* The architecture associated with the inferior through the
connection to the target.
typedef int (iterate_over_objfiles_in_search_order_cb_ftype)
(struct objfile *objfile, void *cb_data);
+/* Callback type for regset section iterators. The callback usually
+ invokes the REGSET's supply or collect method, to which it must
+ pass a buffer with at least the given SIZE. SECT_NAME is a BFD
+ section name, and HUMAN_NAME is used for diagnostic messages.
+ CB_DATA should have been passed unchanged through the iterator. */
+
typedef void (iterate_over_regset_sections_cb)
(const char *sect_name, int size, const struct regset *regset,
const char *human_name, void *cb_data);
bfd *abfd;
/* Use default: NULL (ZERO). */
- struct gdbarch_tdep_info *tdep_info;
+ void *tdep_info;
/* Use default: GDB_OSABI_UNINITIALIZED (-1). */
enum gdb_osabi osabi;
#define GDBARCH_OBSTACK_CALLOC(GDBARCH, NR, TYPE) ((TYPE *) gdbarch_obstack_zalloc ((GDBARCH), (NR) * sizeof (TYPE)))
#define GDBARCH_OBSTACK_ZALLOC(GDBARCH, TYPE) ((TYPE *) gdbarch_obstack_zalloc ((GDBARCH), sizeof (TYPE)))
+/* Duplicate STRING, returning an equivalent string that's allocated on the
+ obstack associated with GDBARCH. The string is freed when the corresponding
+ architecture is also freed. */
+
+extern char *gdbarch_obstack_strdup (struct gdbarch *arch, const char *string);
/* Helper function. Force an update of the current architecture.
then use that to allocate the architecture vector. */
struct obstack *obstack = XNEW (struct obstack);
obstack_init (obstack);
- gdbarch = obstack_alloc (obstack, sizeof (*gdbarch));
+ gdbarch = XOBNEW (obstack, struct gdbarch);
memset (gdbarch, 0, sizeof (*gdbarch));
gdbarch->obstack = obstack;
return data;
}
+/* See gdbarch.h. */
+
+char *
+gdbarch_obstack_strdup (struct gdbarch *arch, const char *string)
+{
+ return obstack_strdup (arch->obstack, string);
+}
+
/* Free a gdbarch struct. This should never happen in normal
operation --- once you've created a gdbarch, you keep it around.
static void
append_name (const char ***buf, int *nr, const char *name)
{
- *buf = xrealloc (*buf, sizeof (char**) * (*nr + 1));
+ *buf = XRESIZEVEC (const char *, *buf, *nr + 1);
(*buf)[*nr] = name;
*nr += 1;
}
if (new_gdbarch->initialized_p)
{
struct gdbarch_list **list;
- struct gdbarch_list *this;
+ struct gdbarch_list *self;
if (gdbarch_debug)
fprintf_unfiltered (gdb_stdlog, "gdbarch_find_by_info: "
"Previous architecture %s (%s) selected\n",
list = &(*list)->next);
/* It had better be in the list of architectures. */
gdb_assert ((*list) != NULL && (*list)->gdbarch == new_gdbarch);
- /* Unlink THIS. */
- this = (*list);
- (*list) = this->next;
- /* Insert THIS at the front. */
- this->next = rego->arches;
- rego->arches = this;
+ /* Unlink SELF. */
+ self = (*list);
+ (*list) = self->next;
+ /* Insert SELF at the front. */
+ self->next = rego->arches;
+ rego->arches = self;
/* Return it. */
return new_gdbarch;
}
/* Insert the new architecture into the front of the architecture
list (keep the list sorted Most Recently Used). */
{
- struct gdbarch_list *this = XNEW (struct gdbarch_list);
- this->next = rego->arches;
- this->gdbarch = new_gdbarch;
- rego->arches = this;
+ struct gdbarch_list *self = XNEW (struct gdbarch_list);
+ self->next = rego->arches;
+ self->gdbarch = new_gdbarch;
+ rego->arches = self;
}
/* Check that the newly installed architecture is valid. Plug in
projects / deliverable / binutils-gdb.git / blobdiff