+2014-06-05 Joel Brobecker <brobecker@adacore.com>
+
+ * development.sh: Delete.
+ * Makefile.in (config.status): Adjust dependency on development.sh.
+ * configure.ac: Adjust development.sh source call.
+ * configure: Regenerate.
+
+2014-06-02 Pedro Alves <palves@redhat.com>
+
+ * ax.c (gdb_free_agent_expr): New function.
+ * ax.h (gdb_free_agent_expr): New declaration.
+ * mem-break.c (delete_gdb_breakpoint_1): Also clear the commands
+ list.
+ (clear_breakpoint_conditions, clear_breakpoint_commands): Make
+ static.
+ (clear_breakpoint_conditions_and_commands): New function.
+ * mem-break.h (clear_breakpoint_conditions): Delete declaration.
+ (clear_breakpoint_conditions_and_commands): New declaration.
+
+2014-05-23 Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
+
+ * linux-aarch64-low.c (asm/ptrace.h): Include.
+
+2014-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
+
+ Fix TLS access for -static -pthread.
+ * gdbserver/thread-db.c (struct thread_db): Add td_thr_tlsbase_p.
+ (thread_db_get_tls_address): Call it if LOAD_MODULE is zero.
+ (thread_db_load_search, try_thread_db_load_1): Initialize it.
+
+2014-05-20 Pedro Alves <palves@redhat.com>
+
+ * linux-aarch64-low.c (aarch64_insert_point)
+ (aarch64_remove_point): No longer check whether the type is
+ supported here. Adjust to new interface.
+ (the_low_target): Install aarch64_supports_z_point_type as
+ supports_z_point_type method.
+ * linux-arm-low.c (raw_bkpt_type_to_arm_hwbp_type): New function.
+ (arm_linux_hw_point_initialize): Take an enum raw_bkpt_type
+ instead of a Z packet char. Adjust.
+ (arm_supports_z_point_type): New function.
+ (arm_insert_point, arm_remove_point): Adjust to new interface.
+ (the_low_target): Install arm_supports_z_point_type.
+ * linux-crisv32-low.c (cris_supports_z_point_type): New function.
+ (cris_insert_point, cris_remove_point): Adjust to new interface.
+ Don't check whether the type is supported here.
+ (the_low_target): Install cris_supports_z_point_type.
+ * linux-low.c (linux_supports_z_point_type): New function.
+ (linux_insert_point, linux_remove_point): Adjust to new interface.
+ * linux-low.h (struct linux_target_ops) <insert_point,
+ remove_point>: Take an enum raw_bkpt_type instead of a char. Add
+ raw_breakpoint pointer parameter.
+ <supports_z_point_type>: New method.
+ * linux-mips-low.c (mips_supports_z_point_type): New function.
+ (mips_insert_point, mips_remove_point): Adjust to new interface.
+ Use mips_supports_z_point_type.
+ (the_low_target): Install mips_supports_z_point_type.
+ * linux-ppc-low.c (the_low_target): Install NULL as
+ supports_z_point_type method.
+ * linux-s390-low.c (the_low_target): Install NULL as
+ supports_z_point_type method.
+ * linux-sparc-low.c (the_low_target): Install NULL as
+ supports_z_point_type method.
+ * linux-x86-low.c (x86_supports_z_point_type): New function.
+ (x86_insert_point): Adjust to new insert_point interface. Use
+ insert_memory_breakpoint. Adjust to new
+ i386_low_insert_watchpoint interface.
+ (x86_remove_point): Adjust to remove_point interface. Use
+ remove_memory_breakpoint. Adjust to new
+ i386_low_remove_watchpoint interface.
+ (the_low_target): Install x86_supports_z_point_type.
+ * lynx-low.c (lynx_target_ops): Install NULL as
+ supports_z_point_type callback.
+ * nto-low.c (nto_supports_z_point_type): New.
+ (nto_insert_point, nto_remove_point): Adjust to new interface.
+ (nto_target_ops): Install nto_supports_z_point_type.
+ * mem-break.c: Adjust intro comment.
+ (struct raw_breakpoint) <raw_type, size>: New fields.
+ <inserted>: Update comment.
+ <shlib_disabled>: Delete field.
+ (enum bkpt_type) <gdb_breakpoint>: Delete value.
+ <gdb_breakpoint_Z0, gdb_breakpoint_Z1, gdb_breakpoint_Z2,
+ gdb_breakpoint_Z3, gdb_breakpoint_Z4>: New values.
+ (raw_bkpt_type_to_target_hw_bp_type): New function.
+ (find_enabled_raw_code_breakpoint_at): New function.
+ (find_raw_breakpoint_at): New type and size parameters. Use them.
+ (insert_memory_breakpoint): New function, based off
+ set_raw_breakpoint_at.
+ (remove_memory_breakpoint): New function.
+ (set_raw_breakpoint_at): Reimplement.
+ (set_breakpoint): New, based on set_breakpoint_at.
+ (set_breakpoint_at): Reimplement.
+ (delete_raw_breakpoint): Go through the_target->remove_point
+ instead of assuming memory breakpoints.
+ (find_gdb_breakpoint_at): Delete.
+ (Z_packet_to_bkpt_type, Z_packet_to_raw_bkpt_type): New functions.
+ (find_gdb_breakpoint): New function.
+ (set_gdb_breakpoint_at): Delete.
+ (z_type_supported): New function.
+ (set_gdb_breakpoint_1): New function, loosely based off
+ set_gdb_breakpoint_at.
+ (check_gdb_bp_preconditions, set_gdb_breakpoint): New functions.
+ (delete_gdb_breakpoint_at): Delete.
+ (delete_gdb_breakpoint_1): New function, loosely based off
+ delete_gdb_breakpoint_at.
+ (delete_gdb_breakpoint): New function.
+ (clear_gdb_breakpoint_conditions): Rename to ...
+ (clear_breakpoint_conditions): ... this. Don't handle a NULL
+ breakpoint.
+ (add_condition_to_breakpoint): Make static.
+ (add_breakpoint_condition): Take a struct breakpoint pointer
+ instead of an address. Adjust.
+ (gdb_condition_true_at_breakpoint): Rename to ...
+ (gdb_condition_true_at_breakpoint_z_type): ... this, and add
+ z_type parameter.
+ (gdb_condition_true_at_breakpoint): Reimplement.
+ (add_breakpoint_commands): Take a struct breakpoint pointer
+ instead of an address. Adjust.
+ (gdb_no_commands_at_breakpoint): Rename to ...
+ (gdb_no_commands_at_breakpoint_z_type): ... this. Add z_type
+ parameter. Return true if no breakpoint was found. Change debug
+ output.
+ (gdb_no_commands_at_breakpoint): Reimplement.
+ (run_breakpoint_commands): Rename to ...
+ (run_breakpoint_commands_z_type): ... this. Add z_type parameter,
+ and change return type to boolean.
+ (run_breakpoint_commands): New function.
+ (gdb_breakpoint_here): Also check for Z1 breakpoints.
+ (uninsert_raw_breakpoint): Don't try to reinsert a disabled
+ breakpoint. Go through the_target->remove_point instead of
+ assuming memory breakpoint.
+ (uninsert_breakpoints_at, uninsert_all_breakpoints): Uninsert
+ software and hardware breakpoints.
+ (reinsert_raw_breakpoint): Go through the_target->insert_point
+ instead of assuming memory breakpoint.
+ (reinsert_breakpoints_at, reinsert_all_breakpoints): Reinsert
+ software and hardware breakpoints.
+ (check_breakpoints, breakpoint_here, breakpoint_inserted_here):
+ Check both software and hardware breakpoints.
+ (validate_inserted_breakpoint): Assert the breakpoint is a
+ software breakpoint. Set the inserted flag to -1 instead of
+ setting shlib_disabled.
+ (delete_disabled_breakpoints): Adjust.
+ (validate_breakpoints): Only validate software breakpoints.
+ Adjust to inserted flag change.
+ (check_mem_read, check_mem_write): Skip breakpoint types other
+ than software breakpoints. Adjust to inserted flag change.
+ * mem-break.h (enum raw_bkpt_type): New enum.
+ (raw_breakpoint, struct process_info): Forward declare.
+ (Z_packet_to_target_hw_bp_type): Delete declaration.
+ (raw_bkpt_type_to_target_hw_bp_type, Z_packet_to_raw_bkpt_type)
+ (set_gdb_breakpoint, delete_gdb_breakpoint)
+ (clear_breakpoint_conditions): New declarations.
+ (set_gdb_breakpoint_at, clear_gdb_breakpoint_conditions): Delete.
+ (breakpoint_inserted_here): Update comment.
+ (add_breakpoint_condition, add_breakpoint_commands): Replace
+ address parameter with a breakpoint pointer parameter.
+ (gdb_breakpoint_here): Update comment.
+ (delete_gdb_breakpoint_at): Delete.
+ (insert_memory_breakpoint, remove_memory_breakpoint): Declare.
+ * server.c (process_point_options): Take a struct breakpoint
+ pointer instead of an address. Adjust.
+ (process_serial_event) <Z/z packets>: Use set_gdb_breakpoint and
+ delete_gdb_breakpoint.
+ * spu-low.c (spu_target_ops): Install NULL as
+ supports_z_point_type method.
+ * target.h: Include mem-break.h.
+ (struct target_ops) <prepare_to_access_memory>: Update comment.
+ <supports_z_point_type>: New field.
+ <insert_point, remove_point>: Take an enum raw_bkpt_type argument
+ instead of a char. Also take a raw breakpoint pointer.
+ * win32-arm-low.c (the_low_target): Install NULL as
+ supports_z_point_type.
+ * win32-i386-low.c (i386_supports_z_point_type): New function.
+ (i386_insert_point, i386_remove_point): Adjust to new interface.
+ (the_low_target): Install i386_supports_z_point_type.
+ * win32-low.c (win32_supports_z_point_type): New function.
+ (win32_insert_point, win32_remove_point): Adjust to new interface.
+ (win32_target_ops): Install win32_supports_z_point_type.
+ * win32-low.h (struct win32_target_ops):
+ <supports_z_point_type>: New method.
+ <insert_point, remove_point>: Take an enum raw_bkpt_type argument
+ instead of a char. Also take a raw breakpoint pointer.
+
+2014-05-20 Pedro Alves <palves@redhat.com>
+
+ * mem-break.h: Include break-common.h.
+ (Z_PACKET_SW_BP, Z_PACKET_HW_BP, Z_PACKET_WRITE_WP)
+ (Z_PACKET_READ_WP, Z_PACKET_ACCESS_WP): New defines.
+ (Z_packet_to_target_hw_bp_type): New declaration.
+ * mem-break.c (Z_packet_to_target_hw_bp_type): New function.
+ * i386-low.c (Z_PACKET_HW_BP, Z_PACKET_WRITE_WP, Z_PACKET_READ_WP)
+ (Z_PACKET_ACCESS_WP): Delete macros.
+ (Z_packet_to_hw_type): Delete function.
+ * i386-low.h: Don't include break-common.h here.
+ (Z_packet_to_hw_type): Delete declaration.
+ * linux-x86-low.c (x86_insert_point, x86_insert_point): Call
+ Z_packet_to_target_hw_bp_type instead of Z_packet_to_hw_type.
+ * win32-i386-low.c (i386_insert_point, i386_remove_point): Call
+ Z_packet_to_target_hw_bp_type instead of Z_packet_to_hw_type.
+ * linux-aarch64-low.c: Don't include break-common.h here.
+ (Z_PACKET_SW_BP, Z_PACKET_HW_BP, Z_PACKET_WRITE_WP)
+ (Z_PACKET_READ_WP, Z_PACKET_ACCESS_WP): Delete macros.
+ (Z_packet_to_target_hw_bp_type): Delete function.
+ * linux-mips-low.c (rsp_bp_type_to_target_hw_bp_type): Delete
+ function.
+ (mips_insert_point, mips_remove_point): Use
+ Z_packet_to_target_hw_bp_type.
+
+2014-05-20 Pedro Alves <palves@redhat.com>
+
+ * linux-aarch64-low.c: Include break-common.h.
+ (enum target_point_type): Delete.
+ (Z_packet_to_point_type): Rename to ...
+ (Z_packet_to_target_hw_bp_type): ... this, and return a
+ target_hw_bp_type instead.
+ (aarch64_show_debug_reg_state): Take an enum target_hw_bp_type
+ instead of an enum target_point_type.
+ (aarch64_point_encode_ctrl_reg): Likewise. Compute type mask from
+ breakpoint type.
+ (aarch64_dr_state_insert_one_point)
+ (aarch64_dr_state_remove_one_point, aarch64_handle_breakpoint)
+ (aarch64_handle_aligned_watchpoint)
+ (aarch64_handle_unaligned_watchpoint, aarch64_handle_watchpoint):
+ Take an enum target_hw_bp_type instead of an enum
+ target_point_type.
+ (aarch64_supports_z_point_type): New function.
+ (aarch64_insert_point, aarch64_remove_point): Use it. Adjust to
+ use Z_packet_to_target_hw_bp_type.
+
+2014-05-20 Joel Brobecker <brobecker@adacore.com>
+
+ * configure.ac: Only use -Werror by default when DEVELOPMENT
+ is true.
+ * configure: Regenerate.
+
+2014-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
+
+ Fix gdbserver qGetTLSAddr for x86_64 -m32.
+ * linux-x86-low.c (X86_64_USER_REGS): New.
+ (x86_fill_gregset): Call memset for BUF first in x86_64 -m32 case.
+
+2014-04-28 Yao Qi <yao@codesourcery.com>
+
+ * Makefile.in (i386-avx512.c): Fix the typo of generated file
+ name.
+
+2014-04-25 Pedro Alves <palves@redhat.com>
+
+ PR server/16255
+ * linux-low.c (linux_attach_fail_reason_string): New function.
+ (linux_attach_lwp): Delete.
+ (linux_attach_lwp_1): Rename to ...
+ (linux_attach_lwp): ... this. Take a ptid instead of a pid as
+ argument. Remove "initial" parameter. Return int instead of
+ void. Don't error or warn here.
+ (linux_attach): Adjust to call linux_attach_lwp. Call error on
+ failure to attach to the tgid. Call warning when failing to
+ attach to an lwp.
+ * linux-low.h (linux_attach_lwp): Take a ptid instead of a pid as
+ argument. Remove "initial" parameter. Return int instead of
+ void. Don't error or warn here.
+ (linux_attach_fail_reason_string): New declaration.
+ * thread-db.c (attach_thread): Adjust to linux_attach_lwp's
+ interface change. Use linux_attach_fail_reason_string.
+
+2014-04-24 Michael Sturm <michael.sturm@mintel.com>
+ Walfred Tedeschi <walfred.tedeschi@intel.com>
+
+ * Makefile.in: Added rules to handle new files
+ i386-avx512.c i386-avx512-linux.c amd64-avx512.c
+ amd64-avx512-linux.c x32-avx512.c x32-avx512-linux.c.
+ * configure.srv (srv_i386_regobj): Add i386-avx512.o.
+ (srv_i386_linux_regobj): Add i386-avx512-linux.o.
+ (srv_amd64_regobj): Add amd64-avx512.o and x32-avx512.o.
+ (srv_amd64_linux_regobj): Add amd64-avx512-linux.o and
+ x32-avx512-linux.o.
+ (srv_i386_32bit_xmlfiles): Add i386/32bit-avx512.xml.
+ (srv_i386_64bit_xmlfiles): Add i386/64bit-avx512.xml.
+ (srv_amd64_xmlfiles): Add i386/amd64-avx512.xml and
+ i386/x32-avx512.xml.
+ (srv_i386_linux_xmlfiles): Add i386/i386-avx512-linux.xml.
+ (srv_amd64_linux_xmlfiles): Add i386/amd64-avx512-linux.xml and
+ i386/x32-avx512-linux.xml.
+ * i387-fp.c (num_avx512_k_registers): New constant for number
+ of K registers.
+ (num_avx512_zmmh_low_registers): New constant for number of
+ lower ZMM registers (0-15).
+ (num_avx512_zmmh_high_registers): New constant for number of
+ higher ZMM registers (16-31).
+ (num_avx512_ymmh_registers): New contant for number of higher
+ YMM registers (ymm16-31 added by avx521 on x86_64).
+ (num_avx512_xmm_registers): New constant for number of higher
+ XMM registers (xmm16-31 added by AVX512 on x86_64).
+ (struct i387_xsave): Add space for AVX512 registers.
+ (i387_cache_to_xsave): Change raw buffer size to 64 characters.
+ Add code to handle AVX512 registers.
+ (i387_xsave_to_cache): Add code to handle AVX512 registers.
+ * linux-x86-low.c (init_registers_amd64_avx512_linux): New
+ prototypei from generated file.
+ (tdesc_amd64_avx512_linux): Likewise.
+ (init_registers_x32_avx512_linux): Likewise.
+ (tdesc_x32_avx512_linux): Likewise.
+ (init_registers_i386_avx512_linux): Likewise.
+ (tdesc_i386_avx512_linux): Likewise.
+ (x86_64_regmap): Add AVX512 registers.
+ (x86_linux_read_description): Add code to handle AVX512 XSTATE
+ mask.
+ (initialize_low_arch): Add code to initialize AVX512 registers.
+
+2014-04-23 Pedro Alves <palves@redhat.com>
+
+ * mem-break.c (find_gdb_breakpoint_at): Make static.
+ * mem-break.h (find_gdb_breakpoint_at): Delete declaration.
+
+2014-04-23 Pedro Alves <palves@redhat.com>
+
+ * i386-low.c: Don't include break-common.h here.
+ (i386_low_insert_watchpoint, i386_low_remove_watchpoint): Change
+ prototype to take target_hw_bp_type as argument instead of a Z
+ packet char.
+ * i386-low.h: Include break-common.h here.
+ (Z_packet_to_hw_type): Declare.
+ (i386_low_insert_watchpoint, i386_low_remove_watchpoint): Change
+ prototypes.
+ * linux-x86-low.c (x86_insert_point): Convert the packet number to
+ a target_hw_bp_type before calling i386_low_insert_watchpoint.
+ (x86_remove_point): Convert the packet number to a
+ target_hw_bp_type before calling i386_low_remove_watchpoint.
+ * win32-i386-low.c (i386_insert_point): Convert the packet number
+ to a target_hw_bp_type before calling i386_low_insert_watchpoint.
+ (i386_remove_point): Convert the packet number to a
+ target_hw_bp_type before calling i386_low_remove_watchpoint.
+
+2014-04-23 Pedro Alves <palves@redhat.com>
+
+ * utils.h (perror_with_name): Add ATTRIBUTE_NORETURN.
+
+2014-04-10 Pedro Alves <palves@redhat.com>
+
+ * mem-break.c (add_breakpoint_condition, add_breakpoint_commands):
+ Check if the condition or command is NULL before checking if the
+ breakpoint is known. On success, return true.
+ * mem-break.h (add_breakpoint_condition): Document return.
+ (add_breakpoint_commands): Add describing comment.
+ * server.c (skip_to_semicolon): New function.
+ (process_point_options): Use it.
+
+2014-04-09 Pedro Alves <palves@redhat.com>
+
+ * linux-low.c (linux_read_loadmap): Pass current_inferior directly
+ to lwpid_of.
+
+2014-02-27 Pedro Alves <palves@redhat.com>
+
+ PR 12702
+ * inferiors.h (A_I_NEXT, ALL_INFERIORS_TYPE, ALL_PROCESSES): New
+ macros.
+ * linux-low.c (delete_lwp, handle_extended_wait): Add debug
+ output.
+ (last_thread_of_process_p): Take a PID argument instead of a
+ thread pointer.
+ (linux_wait_for_lwp): Delete.
+ (num_lwps, check_zombie_leaders, not_stopped_callback): New
+ functions.
+ (linux_low_filter_event): New function, party factored out from
+ linux_wait_for_event.
+ (linux_wait_for_event): Rename to ...
+ (linux_wait_for_event_filtered): ... this. Add new filter ptid
+ argument. Partly rewrite. Always use waitpid(-1, WNOHANG) and
+ sigsuspend. Check for zombie leaders.
+ (linux_wait_for_event): Reimplement as wrapper around
+ linux_wait_for_event_filtered.
+ (linux_wait_1): Handle TARGET_WAITKIND_NO_RESUMED. Assume that if
+ a normal or signal exit is seen, it's the whole process exiting.
+ (wait_for_sigstop): No longer a for_each_inferior callback.
+ Rewrite on top of linux_wait_for_event_filtered.
+ (stop_all_lwps): Call wait_for_sigstop directly.
+ * server.c (resume, handle_target_event): Handle
+ TARGET_WAITKIND_NO_RESUMED.
+
+2014-02-26 Joel Brobecker <brobecker@adacore.com>
+
+ * win32-low.c (psapi_get_dll_name,
+ * win32_CreateToolhelp32Snapshot): Delete.
+ (win32_CreateToolhelp32Snapshot, win32_Module32First)
+ (win32_Module32Next, load_toolhelp, toolhelp_get_dll_name):
+ Delete.
+ (handle_load_dll): Add function description.
+ Remove code using psapi_get_dll_name and toolhelp_get_dll_name.
+
+2014-02-26 Joel Brobecker <brobecker@adacore.com>
+
+ * win32-low.c (win32_add_one_solib): Add 0x1000 to load_addr.
+ Add comment.
+ (win32_add_all_dlls): Remove 0x1000 offset applied to DLL
+ base address when calling win32_add_one_solib.
+ (handle_load_dll): Delete local variable load_addr.
+ Remove 0x1000 offset applied to DLL base address when calling
+ win32_add_one_solib.
+ (handle_unload_dll): Add comment.
+
+2014-02-26 Joel Brobecker <brobecker@adacore.com>
+
+ * win32-low.c (win32_add_all_dlls): Renames
+ win32_ensure_ntdll_loaded. Rewrite function documentation.
+ Adjust implementation to always load all DLLs.
+ Add 0x1000 offset to DLL base address when calling
+ win32_add_one_solib.
+ (child_initialization_done): New static global.
+ (do_initial_child_stuff): Set child_initialization_done to
+ zero during child initialization, and 1 after. Replace call
+ to win32_ensure_ntdll_loaded by call to win32_add_all_dlls.
+ Add comment.
+ (match_dll_by_basename, dll_is_loaded_by_basename): Delete.
+ (handle_unload_dll): Add function documentation.
+ (get_child_debug_event): Ignore load and unload DLL events
+ during child initialization.
+
+2014-02-20 Doug Evans <dje@google.com>
+
+ Remove global all_lwps.
+ * inferiors.h (ptid_of): Move here from linux-low.h.
+ (pid_of, lwpid_of): Ditto.
+ * linux-aarch64-low.c (debug_reg_change_callback): Update, "entry"
+ parameter is a struct thread_info * now.
+ (aarch64_notify_debug_reg_change): Fetch pid from current_inferior
+ directly. Pass &all_threads to find_inferior instead of &all_lwps.
+ (aarch64_stopped_data_address): Fetch lwpid from current_inferior
+ directly.
+ (aarch64_linux_prepare_to_resume): Fetch ptid from thread.
+ (aarch64_arch_setup): Fetch lwpid from current_inferior directly.
+ * linux-arm-low.c (update_registers_callback): Update, "entry"
+ parameter is a struct thread_info * now.
+ Fetch lwpid from current_inferior directly.
+ (arm_insert_point): Pass &all_threads to find_inferior instead of
+ &all_lwps.
+ (arm_remove_point): Ditto.
+ (arm_stopped_by_watchpoint): Fetch lwp from current_inferior.
+ (arm_prepare_to_resume): Fetch pid from thread.
+ (arm_read_description): Fetch lwpid from current_inferior directly.
+ * linux-low.c (all_lwps): Delete.
+ (delete_lwp): Delete call to remove_inferior.
+ (handle_extended_wait): Fetch lwpid from thread.
+ (add_lwp): Don't set lwp->entry.id. Remove call to
+ add_inferior_to_list.
+ (linux_attach_lwp_1): Fetch pid from current_inferior directly.
+ (linux_kill_one_lwp): Fetch ptid,lwpid from thread.
+ (kill_one_lwp_callback): Ditto.
+ (linux_kill): Don't dereference NULL pointer.
+ Fetch ptid,lwpid from thread.
+ (get_detach_signal): Fetch ptid from thread.
+ (linux_detach_one_lwp): Fetch ptid,lwpid from thread.
+ Simplify call to regcache_invalidate_thread.
+ (delete_lwp_callback): Update, "entry" parameter is a
+ struct thread_info * now. Fetch pid from thread.
+ (linux_mourn): Pass &all_threads to find_inferior instead of &all_lwps.
+ (status_pending_p_callback): Update, "entry" parameter is a
+ struct thread_info * now. Fetch ptid from thread.
+ (find_lwp_pid): Update, "entry" parameter is a
+ struct thread_info * now.
+ (linux_wait_for_lwp): Fetch pid from thread.
+ (linux_fast_tracepoint_collecting): Fetch lwpid from thread.
+ (maybe_move_out_of_jump_pad): Fetch lwpid from current_inferior.
+ (enqueue_one_deferred_signal): Fetch lwpid from thread.
+ (dequeue_one_deferred_signal): Ditto.
+ (cancel_breakpoint): Fetch ptid from current_inferior.
+ (linux_wait_for_event): Pass &all_threads to find_inferior,
+ not &all_lwps. Fetch ptid, lwpid from thread.
+ (count_events_callback): Update, "entry" parameter is a
+ struct thread_info * now.
+ (select_singlestep_lwp_callback): Ditto.
+ (select_event_lwp_callback): Ditto.
+ (cancel_breakpoints_callback): Ditto.
+ (linux_cancel_breakpoints): Pass &all_threads to find_inferior,
+ not &all_lwps.
+ (select_event_lwp): Ditto. Fetch ptid from event_thread.
+ (unsuspend_one_lwp): Update, "entry" parameter is a
+ struct thread_info * now.
+ (unsuspend_all_lwps): Pass &all_threads to find_inferior,
+ not &all_lwps.
+ (linux_stabilize_threads): Ditto. And for for_each_inferior.
+ Fetch lwpid from thread, not lwp.
+ (linux_wait_1): Fetch ptid, lwpid from current_inferior.
+ Pass &all_threads to find_inferior, not &all_lwps.
+ (send_sigstop): Fetch lwpid from thread, not lwp.
+ (send_sigstop_callback): Update, "entry" parameter is a
+ struct thread_info * now.
+ (suspend_and_send_sigstop_callback): Ditto.
+ (wait_for_sigstop): Ditto. Fetch ptid, lwpid from thread, lwp.
+ (stuck_in_jump_pad_callback): Update, "entry" parameter is a
+ struct thread_info * now.
+ (move_out_of_jump_pad_callback): Ditto. Fetch ptid, lwpid
+ from thread, lwp.
+ (lwp_running): Update, "entry" parameter is a
+ struct thread_info * now.
+ (stop_all_lwps): Fetch ptid from thread.
+ Pass &all_threads to find_inferior, for_each_inferior, not &all_lwps.
+ (linux_resume_one_lwp): Fetch lwpid from thread.
+ (linux_set_resume_request): Update, "entry" parameter is a
+ struct thread_info * now. Fetch pid, lwpid from thread.
+ (resume_status_pending_p): Update, "entry" parameter is a
+ struct thread_info * now.
+ (need_step_over_p): Ditto. Fetch lwpid from thread.
+ (start_step_over): Fetch lwpid from thread.
+ (linux_resume_one_thread): Update, "entry" parameter is a
+ struct thread_info * now. Fetch lwpid from thread.
+ (linux_resume): Pass &all_threads to find_inferior, not &all_lwps.
+ (proceed_one_lwp): Update, "entry" parameter is a
+ struct thread_info * now. Fetch lwpid from thread.
+ (unsuspend_and_proceed_one_lwp): Update, "entry" parameter is a
+ struct thread_info * now.
+ (proceed_all_lwps): Pass &all_threads to find_inferior, not &all_lwps.
+ (unstop_all_lwps): Ditto. Fetch lwpid from thread.
+ (regsets_fetch_inferior_registers): Fetch lwpid from current_inferior
+ directly.
+ (regsets_store_inferior_registers): Ditto.
+ (fetch_register, store_register): Ditto.
+ (linux_read_memory, linux_write_memory): Ditto.
+ (linux_request_interrupt): Ditto.
+ (linux_read_auxv): Ditto.
+ (linux_xfer_siginfo): Ditto.
+ (linux_qxfer_spu): Ditto.
+ (linux_qxfer_libraries_svr4): Ditto.
+ * linux-low.h (ptid_of, pid_of, lwpid_of): Delete,
+ moved to inferiors.h.
+ (get_lwp): Delete.
+ (get_thread_lwp): Update.
+ (struct lwp_info): Delete member "entry". Simplify comment for
+ member "thread".
+ (all_lwps): Delete.
+ * linux-mips-low.c (mips_read_description): Fetch lwpid from
+ current_inferior directly.
+ (update_watch_registers_callback): Update, "entry" parameter is a
+ struct thread_info * now. Fetch pid from thread.
+ (mips_linux_prepare_to_resume): Fetch ptid from thread.
+ (mips_insert_point): Fetch lwpid from current_inferior.
+ Pass &all_threads to find_inferior, not &all_lwps.
+ (mips_remove_point): Pass &all_threads to find_inferior, not &all_lwps.
+ (mips_stopped_by_watchpoint): Fetch lwpid from current_inferior
+ directly.
+ (mips_stopped_data_address): Ditto.
+ * linux-s390-low.c (s390_arch_setup): Fetch pid from current_inferior
+ directly.
+ * linux-tile-low.c (tile_arch_setup): Ditto.
+ * linux-x86-low.c (x86_get_thread_area): Fetch lwpid from thread.
+ (update_debug_registers_callback): Update, "entry" parameter is a
+ struct thread_info * now. Fetch pid from thread.
+ (i386_dr_low_set_addr): Fetch pid from current_inferior directly.
+ Pass &all_threads to find_inferior, not &all_lwps.
+ (i386_dr_low_get_addr): Fetch ptid from current_inferior directly.
+ (i386_dr_low_set_control): Fetch pid from current_inferior directly.
+ Pass &all_threads to find_inferior, not &all_lwps.
+ (i386_dr_low_get_control): Fetch ptid from current_inferior directly.
+ (i386_dr_low_get_status): Ditto.
+ (x86_linux_prepare_to_resume): Fetch ptid from thread.
+ (x86_siginfo_fixup): Fetch lwpid from current_inferior directly.
+ (x86_linux_read_description): Ditto.
+ * proc-service.c (ps_getpid): Fetch pid from current_inferior directly.
+
+2014-02-20 Doug Evans <dje@google.com>
+
+ * inferiors.c (get_first_inferior): Fix buglet.
+
+2014-02-19 Doug Evans <dje@google.com>
+
+ * gdbthread.h (add_thread): Change result type to struct thread_info *.
+ * inferiors.c (add_thread): Change result type to struct thread_info *.
+ All callers updated.
+ (add_lwp): Call add_thread here instead of in callers.
+ All callers updated.
+ * linux-low.h (get_lwp_thread): Rewrite.
+ (struct lwp_info): New member "thread".
+
+2014-02-19 Doug Evans <dje@google.com>
+
+ * linux-low.c (add_lwp): Change result to struct lwp_info *.
+ All callers updated.
+
+2014-02-19 Doug Evans <dje@google.com>
+
+ * inferiors.c (add_thread): Fix whitespace.
+
+2014-02-19 Doug Evans <dje@google.com>
+
+ * dll.c (clear_dlls): Replace accessing list implemention details
+ with API function.
+ * gdbthread.h (get_first_thread): Declare.
+ * inferiors.c (for_each_inferior_with_data): New function.
+ (get_first_thread): New function.
+ (find_thread_ptid): Simplify.
+ (get_first_inferior): New function.
+ (clear_list): Delete.
+ (one_inferior_p): New function.
+ (clear_inferior_list): New function.
+ (clear_inferiors): Update.
+ * inferiors.h (for_each_inferior_with_data): Declare.
+ (clear_inferior_list): Declare.
+ (one_inferior_p): Declare.
+ (get_first_inferior): Declare.
+ * linux-low.c (linux_wait_for_event): Replace accessing list
+ implemention details with API function.
+ * server.c (target_running): Ditto.
+ (accumulate_file_name_length): New function.
+ (emit_dll_description): New function.
+ (handle_qxfer_libraries): Replace accessing list implemention
+ details with API function.
+ (handle_qxfer_threads_worker): New function.
+ (handle_qxfer_threads_proper): Replace accessing list implemention
+ details with API function.
+ (handle_query): Ditto.
+ (visit_actioned_threads_callback_ftype): New typedef.
+ (visit_actioned_threads_data): New struct.
+ (visit_actioned_threads): Rewrite to be find_inferior callback.
+ (resume): Call find_inferior.
+ (handle_status): Replace accessing list implemention
+ details with API function.
+ (process_serial_event): Replace accessing list implemention details
+ with API function.
+ * target.c (set_desired_inferior): Replace accessing list implemention
+ details with API function.
+ * tracepoint.c (same_process_p): New function.
+ (gdb_agent_about_to_close): Replace accessing list implemention
+ details with API function.
+ * win32-low.c (child_delete_thread): Replace accessing list
+ implemention details with API function.
+ (match_dll_by_basename): New function.
+ (dll_is_loaded_by_basename): New function.
+ (win32_ensure_ntdll_loaded): Replace accessing list implemention
+ details call to dll_is_loaded_by_basename.
+
+2014-02-19 Doug Evans <dje@google.com>
+
+ * dll.h (struct dll_info): Add comment.
+ * gdbthread.h (struct thread_info): Add comment.
+ (current_ptid): Simplify.
+ * inferiors.c (add_process): Update.
+ (remove_process): Update.
+ * inferiors.h (struct process_info): Rename member "head" to "entry".
+ * linux-low.c (delete_lwp): Update.
+ (add_lwp): Update.
+ (last_thread_of_process_p): Update.
+ (kill_one_lwp_callback, linux_kill): Update.
+ (status_pending_p_callback): Update.
+ (wait_for_sigstop): Update. Simplify read of ptid.
+ (start_step_over): Update.
+ * linux-low.h (ptid_of, pid_of, lwpid_of): Update.
+ (get_lwp_thread): Update.
+ (struct lwp_info): Rename member "head" to "entry".
+ * regcache.h (inferior_list_entry): Delete.
+ * server.c (kill_inferior_callback): Update.
+ (detach_or_kill_inferior_callback): Update.
+ (print_started_pid): Update.
+ (print_attached_pid): Update.
+ (process_serial_event): Simplify read of ptid.
+ * thread-db.c (thread_db_create_event): Update.
+ (thread_db_get_tls_address): Update.
+ * win32-low.c (current_inferior_ptid): Simplify.
+
+2014-02-19 Tom Tromey <tromey@redhat.com>
+
+ * target.h (struct target_ops) <supports_btrace>: Add target_ops
+ argument.
+ (target_supports_btrace): Update.
+
+2014-02-14 Yao Qi <yao@codesourcery.com>
+
+ * Makefile.in (IPA_OBJS): Append rsp-low-ipa.o.
+ (rsp-low-ipa.o): New target.
+
+2014-02-12 Tom Tromey <tromey@redhat.com>
+
+ * ax.c (gdb_parse_agent_expr): Use hex2bin, not
+ convert_ascii_to_int.
+ * regcache.c (registers_to_string): Likewise.
+ * remote-utils.c (decode_M_packet): Likewise.
+ * server.c (process_serial_event): Likewise.
+
+2014-02-12 Tom Tromey <tromey@redhat.com>
+
+ * server.c (handle_query, handle_v_run): Use hex2bin, not
+ unhexify.
+ * tracepoint.c (cmd_qtdpsrc, cmd_qtdv, cmd_qtnotes): Likewise.
+
+2014-02-12 Tom Tromey <tromey@redhat.com>
+
+ * ax.c (gdb_unparse_agent_expr): Use bin2hex, not
+ convert_int_to_ascii.
+ * regcache.c (registers_to_string, collect_register_as_string):
+ Likewise.
+ * remote-utils.c (look_up_one_symbol, relocate_instruction):
+ Likewise.
+ * server.c (process_serial_event): Likewise.
+ * tracepoint.c (cmd_qtstatus, response_source, response_tsv)
+ (cmd_qtbuffer, cstr_to_hexstr): Likewise.
+
+2014-02-12 Tom Tromey <tromey@redhat.com>
+
+ * remote-utils.c (look_up_one_symbol, monitor_output): Use
+ bin2hex, not hexify.
+ * tracepoint.c (cmd_qtstatus): Likewise.
+
+2014-02-12 Tom Tromey <tromey@redhat.com>
+
+ * remote-utils.c (monitor_output): Pass explicit length to
+ hexify.
+
+2014-02-12 Tom Tromey <tromey@redhat.com>
+
+ * tracepoint.c: Include rsp-low.h.
+ * server.c: Include rsp-low.h.
+ * remote-utils.h (convert_ascii_to_int, convert_int_to_ascii)
+ (unhexify, hexify, remote_escape_output, unpack_varlen_hex): Don't
+ declare.
+ * remote-utils.c: Include rsp-low.h.
+ (fromhex, hexchars, ishex, unhexify, tohex, hexify)
+ (remote_escape_output, remote_unescape_input, unpack_varlen_hex)
+ (convert_int_to_ascii, convert_ascii_to_int): Move to
+ common/rsp-low.c.
+ * regcache.c: Include rsp-low.h.
+ * ax.c: Include rsp-low.h.
+ * Makefile.in (SFILES): Add common/rsp-low.c.
+ (OBS): Add rsp-low.o.
+ (rsp-low.o): New target.
+
+2014-02-12 Tom Tromey <tromey@redhat.com>
+
+ * utils.h (pulongest, plongest, phex_nz): Don't declare.
+ Include print-utils.h.
+ * utils.c (NUMCELLS, CELLSIZE, get_cell, decimal2str, pulongest)
+ (plongest, thirty_two, phex_nz): Remove.
+ * Makefile.in (SFILES): Add common/print-utils.c.
+ (OBS): Add print-utils.o.
+ (print-utils-ipa.o): New target.
+ (print-utils.o): New target.
+ (IPA_OBJS): Add print-utils-ipa.o.
+
+2014-02-06 Tom Tromey <tromey@redhat.com>
+
+ * Makefile.in (SFILES): Fix indentation.
+
+2014-02-05 Doug Evans <dje@google.com>
+
+ * linux-low.c (linux_wait_for_event): Improve comment.
+ (linux_wait_1): Keep current_inferior in sync with event_child.
+
+2014-01-22 Doug Evans <dje@google.com>
+
+ * gdbthread.h (gdb_id_to_thread): Delete, unused.
+
+2014-01-22 Doug Evans <dje@google.com>
+
+ * configure.ac (AC_CHECK_FUNCS): Add test for gettimeofday.
+ * configure: Regenerate.
+ * config.in: Regenerate.
+ * Makefile.in (SFILES): Add debug.c.
+ (OBS): Add debug.o.
+ * debug.c: New file.
+ * debug.h: New file.
+ * linux-aarch64-low.c (*): Update all debugging printfs to use
+ debug_printf instead of fprintf.
+ * linux-arm-low.c (*): Ditto.
+ * linux-cris-low.c (*): Ditto.
+ * linux-crisv32-low.c (*): Ditto.
+ * linux-m32r-low.c (*): Ditto.
+ * linux-sparc-low.c (*): Ditto.
+ * linux-x86.c (*): Ditto.
+ * linux-low.c (*): Ditto.
+ (linux_wait_1): Add calls to debug_enter, debug_exit.
+ (linux_wait): Remove redundant debugging printf.
+ (stop_all_lwps): Add calls to debug_enter, debug_exit.
+ (linux_resume, unstop_all_lwps): Ditto.
+ * mem-break.c (*): Update all debugging printfs to use
+ debug_printf instead of fprintf.
+ * remote-utils.c (*): Ditto.
+ * thread-db.c (*): Ditto.
+ * server.c #include <ctype.h>, "gdb_vecs.h".
+ (debug_threads): Moved to debug.c.
+ (*): Update all debugging printfs to use debug_printf instead of
+ fprintf.
+ (start_inferior): Replace call to fflush with call to debug_flush.
+ (monitor_show_help): Mention set debug-format.
+ (parse_debug_format_options): New function.
+ (handle_monitor_command): Handle "monitor set debug-format".
+ (gdbserver_usage): Mention --debug-format.
+ (main): Parse --debug-format.
+ * server.h (debug_threads): Declaration moved to debug.h.
+ #include "debug.h".
+ * tracepoint.c (trace_debug_1) [!IN_PROCESS_AGENT]: Add version of
+ trace_debug_1 that uses debug_printf.
+ (tracepoint_look_up_symbols): Update all debugging printfs to use
+ debug_printf instead of fprintf.
+
+2014-01-20 Baruch Siach <baruch@tkos.co.il>
+
+ * linux-xtensa-low.c: Include asm/ptrace.h instead of
+ sys/ptrace.h.
+
+2014-01-17 Pedro Alves <palves@redhat.com>
+
+ PR build/16445
+ * linux-x86-low.c: Don't include elf/common.h if ELFMAG0 is
+ defined after including gdb_proc_service.h.
+
+2014-01-16 Doug Evans <dje@google.com>
+
+ * dll.c (UNSPECIFIED_CORE_ADDR): New macro.
+ (match_dll): Use it.
+
+2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
+
+ * target.h (target_ops) <read_btrace>: Change parameters and
+ return type to allow error reporting.
+ * server.c (handle_qxfer_btrace): Support delta reads. Pass
+ trace reading errors on.
+ * linux-low.c (linux_low_read_btrace): Pass trace reading
+ errors on.
+ (linux_low_disable_btrace): New.
+
+2014-01-15 Doug Evans <dje@google.com>
+
+ * inferiors.c (thread_id_to_gdb_id): Delete.
+ * inferiors.h (thread_id_to_gdb_id): Delete.
+
+2014-01-13 Eli Zaretskii <eliz@gnu.org>
+
+ * Makefile.in (INCLUDE_CFLAGS): Remove trailing slash from
+ "-I$(srcdir)/../". Fixes MinGW compilation errors with old GCC
+ versions.
+
+2014-01-08 Pedro Alves <palves@redhat.com>
+
+ * server.c (handle_status): Don't discard previous queued stop
+ replies or thread's pending status here.
+ (main) <disconnection>: Do it here instead.
+
+2014-01-08 Pedro Alves <palves@redhat.com>
+
+ * gdbthread.h (struct thread_info) <status_pending_p>: New field.
+ * server.c (visit_actioned_threads, handle_pending_status): New
+ function.
+ (handle_v_cont): Factor out parts to ...
+ (resume): ... this new function. If in all-stop, and a thread
+ being resumed has a pending status, report it without actually
+ resuming.
+ (myresume): Adjust to use the new 'resume' function.
+ (clear_pending_status_callback, set_pending_status_callback)
+ (find_status_pending_thread_callback): New functions.
+ (handle_status): Handle the case of multiple threads having
+ interesting statuses to report. Report threads' real last signal
+ instead of always reporting GDB_SIGNAL_TRAP. Look for a thread
+ with an interesting thread to report the status for, instead of
+ always reporting the status of the first thread.
+
+2014-01-01 Joel Brobecker <brobecker@adacore.com>
+
+ * gdbserver.c (gdbserver_version): Set copyright year to 2014.
+ * gdbreplay.c (gdbreplay_version): Likewise.
+
+2013-12-18 Yufeng Zhang <yufeng.zhang@arm.com>
+
+ * linux-aarch64-low.c (aarch64_linux_set_debug_regs): Set
+ iov.iov_len with the real length in use.
+
+2013-12-13 Joel Brobecker <brobecker@adacore.com>
+
+ * Makefile.in (safe-ctype.o, lbasename.o): New rules.
+ * configure.srv: Add safe-ctype.o and lbasename.o to srv_tgtobj
+ for all targets that use win32-low.c.
+ * win32-low.c (win32_ensure_ntdll_loaded): New function.
+ (do_initial_child_stuff): Add call to win32_ensure_ntdll_loaded.
+
+2013-12-13 Pedro Alves <palves@redhat.com>
+
+ * target.c (mywait): Set OURSTATUS->KIND to TARGET_WAITKIND_STOPPED
+ if equal to TARGET_WAITKIND_LOADED.
+ * win32-low.c (cached_status): New static global.
+ (win32_wait): Add declaration.
+ (do_initial_child_stuff): Flush all initial pending debug events
+ up to the initial breakpoint.
+ (win32_wait): If CACHED_STATUS was set, return that instead
+ of doing a real wait. Remove the code resuming the execution
+ of the inferior after receiving a TARGET_WAITKIND_LOADED event
+ during the initial phase. Also remove the code changing
+ OURSTATUS->KIND from TARGET_WAITKIND_LOADED to
+ TARGET_WAITKIND_STOPPED.
+
+2013-12-11 Yao Qi <yao@codesourcery.com>
+
+ * notif.c (handle_notif_ack): Return 0 if no notification
+ matches.
+
+2013-11-20 Doug Evans <dje@google.com>
+
+ * linux-low.c (linux_set_resume_request): Fix comment.
+
+2013-11-20 Doug Evans <dje@google.com>
+
+ * linux-low.c (resume_status_pending_p): Tweak comment.
+
+2013-11-20 Walfred Tedeschi <walfred.tedeschi@intel.com>
+
+ * Makefile.in: Add i386-mpx.c, i386-mpx-linux.c, amd64-mpx.c,
+ amd64-mpx-linux.c, x32-mpx.c and x32-mpx-linux.c generation.
+ * configure.srv (srv_i386_regobj): Add i386-mpx.o.
+ (srv_i386_linux_regobj): Add i386-mpx-linux.o.
+ (srv_amd64_regobj): Add amd64-mpx.o.
+ (srv_amd64_linux_regobj): Add amd64-mpx-linux.o.
+ (srv_i386_32bit_xmlfiles): Add i386/32bit-mpx.xml.
+ (srv_i386_64bit_xmlfiles): Add i386/64bit-mpx.xml.
+ * i387-fp.c (num_pl_bnd_register) Added constant.
+ (num_pl_bnd_cfg_registers) Added constant.
+ (struct i387_xsave) Added reserved area and MPX fields.
+ (i387_cache_to_xsave, i387_xsave_to_cache) Add MPX.
+ * linux-x86-low.c (init_registers_i386_mpx_linux): Declare new
+ function.
+ (tdesc_i386_mpx_linux): Add MPX amd64 target.
+ (init_registers_amd64_mpx_linux): Declare new function.
+ (tdesc_amd64_mpx_linux): Add MPX amd64 target.
+ (x86_64_regmap): Add MPX registers.
+ (x86_linux_read_description): Add MPX case.
+ (initialize_low_arch): Initialize MPX targets.
+
+2013-11-18 Tom Tromey <tromey@redhat.com>
+
+ * configure: Rebuild.
+ * configure.ac: Don't check for stdlib.h.
+ * gdbreplay.c: Unconditionally include stdlib.h.
+
+2013-11-18 Tom Tromey <tromey@redhat.com>
+
+ * config.in: Rebuild.
+ * configure: Rebuild.
+ * configure.ac: Don't use AC_HEADER_DIRENT.
+
+2013-11-18 Tom Tromey <tromey@redhat.com>
+
+ * server.h: Don't check HAVE_STRING_H.
+ * gdbreplay.c: Don't check HAVE_STRING_H.
+ * configure: Rebuild.
+
+2013-11-18 Tom Tromey <tromey@redhat.com>
+
+ * Makefile.in (gdbreplay$(EXEEXT)): Depend on and link against
+ LIBGNU.
+
+2013-11-08 Tom Tromey <tromey@redhat.com>
+
+ * configure, config.in: Rebuild.
+ * configure.ac: Remove unused configury.
+
+2013-11-08 Tom Tromey <tromey@redhat.com>
+
+ * acinclude.m4: Include common.m4, codeset.m4.
+ * configure, config.in: Rebuild.
+ * configure.ac: Use GDB_AC_COMMON.
+
+2013-11-06 Andreas Arnez <arnez@linux.vnet.ibm.com>
+
+ * linux-s390-low.c (HWCAP_S390_TE): New define.
+ (s390_arch_setup): Consider the TE field in the HWCAP for
+ determining 'have_regset_tdb'.
+
+2013-10-16 Sergio Durigan Junior <sergiodj@redhat.com>
+
+ PR gdb/16014
+ * tracepoint.c (download_tracepoint_1): Remove unnecessary double
+ call to sizeof.
+
+2013-10-02 Pedro Alves <palves@redhat.com>
+
+ * server.c (process_serial_event): Don't output "GDBserver
+ exiting" if GDB is connected through stdio.
+ * target.c (mywait): Likewise, be silent if GDB is connected
+ through stdio.
+
+2013-10-01 Joel Brobecker <brobecker@adacore.com>
+
+ * lynx-low.c (lynx_add_threads_after_attach): New function.
+ (lynx_attach): Remove call to add_thread. Add call to
+ lynx_add_threads_after_attach instead.
+
+2013-09-28 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CHECK_HEADERS): Add sys/syscall.h
+ * config.in, configure: Regenerated.
+
+2013-09-18 Yao Qi <yao@codesourcery.com>
+
+ PR server/15959
+ * server.c (start_inferior): Clear 'resume_info'.
+
+2013-09-16 Jiong Wang <jiwang@tilera.com>
+
+ * linux-tile-low.c (tile_regsets): Modify the size field to 64-bit
+ for each register.
+
+2013-09-16 Jiong Wang <jiwang@tilera.com>
+
+ * configure.srv <tilegx*-*-linux*>: Remove linux-osdata.o from and add
+ linux-tile-low.o to srv_tgtobj.
+
+2013-09-16 Will Newton <will.newton@linaro.org>
+
+ * linux-aarch64-low.c (aarch64_linux_set_debug_regs): Zero
+ out regs.
+
+2013-09-06 Pedro Alves <palves@redhat.com>
+
+ * Makefile.in (gdb_proc_service_h, regdef_h, regcache_h)
+ (signals_def, signals_h, ptid_h, ax_h, agent_h, linux_btrace_h)
+ (linux_osdata_h, vec_h, gdb_vecs_h, host_defs_h, libiberty_h)
+ (server_h, gdbthread_h, linux_low_h, linux_ptrace_h)
+ (gdb_thread_db_h, linux_procfs_h, lynx_low_h, nto_low_h)
+ (mips_linux_watch_h, i386_low_h, win32_low_h): Delete.
+
+2013-09-06 Pedro Alves <palves@redhat.com>
+
+ * Makefile.in (linux-btrace.o, mips-linux-watch.o): Remove
+ explicit header dependencies and use $COMPILE/$POSTCOMPILE.
+
+2013-09-06 Pedro Alves <palves@redhat.com>
+
+ * linux-amd64-ipa.c: Include tracepoint.h.
+ * linux-i386-ipa.c: Include tracepoint.h.
+
+2013-09-06 Ricard Wanderlof <ricardw@axis.com>
+
+ * linux-crisv32-low.c (PTRACE_GET_THREAD_AREA): New macro.
+ (ps_get_thread_area): New function.
+
+2013-09-06 Ricard Wanderlof <ricardw@axis.com>
+
+ * linux-crisv32-low.c (elf_gregset_t): Delete typedef.
+ (initialize_low_arch): Call init_registers_crisv32 rather than
+ init_register_crisv32.
+
+2013-09-05 Pedro Alves <palves@redhat.com>
+
+ * server.h (handle_vFile, hostio_last_error_from_errno): Move
+ to ...
+ * hostio.h: ... this new file.
+ * hostio.c, server.c, linux-low.c, nto-low.c, spu-low,
+ win32-low.c: Include hostio.h.
+
+2013-09-05 Pedro Alves <palves@redhat.com>
+
+ * server.h (gdb_client_data, handler_func, callback_handler_func)
+ (delete_file_handler, add_file_handler, append_callback_event)
+ (delete_callback_event, start_event_loop, initialize_event_loop):
+ Move to event-loop.h and include it.
+ * event-loop.h: New file.
+
+2013-09-05 Pedro Alves <palves@redhat.com>
+
+ * dll.c, inferiors.c, remote-utils.c, server.c: Include "dll.h".
+ * server.h (struct dll_info, all_dlls, dlls_changed, clear_dlls)
+ (loaded_dll, unloaded_dll): Move to ...
+ * dll.h: ... this new file.
+ * inferiors.c, remote-utils.c, win32-low.c: Include "dll.h".
+
+2013-09-05 Pedro Alves <palves@redhat.com>
+
+ * server.h (current_process, get_thread_process, all_processes)
+ (add_inferior_to_list, for_each_inferior, current_inferior)
+ (remove_inferior, add_process, remove_process, find_process_pid)
+ (have_started_inferiors_p, have_attached_inferiors_p)
+ (thread_id_to_gdb_id, thread_to_gdb_id, gdb_id_to_thread_id)
+ (clear_inferiors, find_inferior, find_inferior_id)
+ (inferior_target_data, set_inferior_target_data)
+ (inferior_regcache_data, set_inferior_regcache_data): Move to
+ inferiors.h, and include it.
+ * inferiors.h: New file.
+
+2013-09-05 Pedro Alves <palves@redhat.com>
+
+ * server.h (struct emit_ops, current_insn_ptr, emit_error):
+ Move ...
+ * ax.h: ... here.
+
+2013-09-05 Pedro Alves <palves@redhat.com>
+
+ * ax.c, linux-low.c, linux-x86-low.c, server.c: Include
+ tracepoint.h.
+ * server.h (IPA_BUFSIZ, initialize_tracepoint, tracing)
+ (disconnected_tracing, tracepoint_look_up_symbols, stop_tracing
+ (handle_tracepoint_general_set, handle_tracepoint_query)
+ (tracepoint_finished_step, tracepoint_was_hit)
+ (release_while_stepping_state_list, current_traceframe)
+ (in_readonly_region, traceframe_read_mem)
+ (fetch_traceframe_registers, traceframe_read_sdata)
+ (traceframe_read_info, struct fast_tpoint_collect_status)
+ (fast_tracepoint_collecting, force_unlock_trace_buffer)
+ (handle_tracepoit_bkpts, initialize_low_tracepoint)
+ (supply_fast_tracepoint_registers)
+ (supply_static_tracepoint_registers, set_trampoline_buffer_space)
+ (ipa_tdesc, claim_trampoline_space)
+ (have_fast_tracepoint_trampoline_buffer, gdb_agent_about_to_close)
+ (agent_mem_read, agent_get_trace_state_variable_value)
+ (agent_set_trace_state_variable_value, agent_tsv_read)
+ (agent_mem_read_string, get_raw_reg_func_addr)
+ (get_get_tsv_func_addr, get_set_tsv_func_addr): Move to ...
+ * tracepoint.h: ... this new file.
+
+2013-09-05 Pedro Alves <palves@redhat.com>
+
+ * server.h (perror_with_name, error, fatal, warning, paddress)
+ (pulongest, plongest, phex_nz, pfildes): Move to utils.h, and
+ include it.
+ * utils.h: New file.
+
2013-09-05 Pedro Alves <palves@redhat.com>
* server.h (remote_debug, noack_mode, transport_is_reliable)
projects / deliverable / binutils-gdb.git / blobdiff