Remove too simple breakpoint_reinsert_addr implementations.
[deliverable/binutils-gdb.git] / gdb / gdbserver / linux-crisv32-low.c
index efe50a76e5356c93bb95a2a6bb966d12099677b4..2404d0e1f04128c64b9f9a3a6eae628368349048 100644 (file)
@@ -1,5 +1,5 @@
 /* GNU/Linux/CRIS specific low level interface, for the remote server for GDB.
-   Copyright (C) 1995-2013 Free Software Foundation, Inc.
+   Copyright (C) 1995-2015 Free Software Foundation, Inc.
 
    This file is part of GDB.
 
@@ -18,7 +18,7 @@
 
 #include "server.h"
 #include "linux-low.h"
-#include <sys/ptrace.h>
+#include "nat/gdb_ptrace.h"
 
 /* Defined in auto-generated file reg-crisv32.c.  */
 void init_registers_crisv32 (void);
@@ -27,6 +27,10 @@ extern const struct target_desc *tdesc_crisv32;
 /* CRISv32 */
 #define cris_num_regs 49
 
+#ifndef PTRACE_GET_THREAD_AREA
+#define PTRACE_GET_THREAD_AREA 25
+#endif
+
 /* Note: Ignoring USP (having the stack pointer in two locations causes trouble
    without any significant gain).  */
 
@@ -59,7 +63,7 @@ cris_get_pc (struct regcache *regcache)
   unsigned long pc;
   collect_register_by_name (regcache, "pc", &pc);
   if (debug_threads)
-    fprintf (stderr, "stop pc is %08lx\n", pc);
+    debug_printf ("stop pc is %08lx\n", pc);
   return pc;
 }
 
@@ -73,6 +77,15 @@ cris_set_pc (struct regcache *regcache, CORE_ADDR pc)
 static const unsigned short cris_breakpoint = 0xe938;
 #define cris_breakpoint_len 2
 
+/* Implementation of linux_target_ops method "sw_breakpoint_from_kind".  */
+
+static const gdb_byte *
+cris_sw_breakpoint_from_kind (int kind, int *size)
+{
+  *size = cris_breakpoint_len;
+  return (const gdb_byte *) &cris_breakpoint;
+}
+
 static int
 cris_breakpoint_at (CORE_ADDR where)
 {
@@ -88,23 +101,6 @@ cris_breakpoint_at (CORE_ADDR where)
   return 0;
 }
 
-/* We only place breakpoints in empty marker functions, and thread locking
-   is outside of the function.  So rather than importing software single-step,
-   we can just run until exit.  */
-
-/* FIXME: This function should not be needed, since we have PTRACE_SINGLESTEP
-   for CRISv32.  Without it, td_ta_event_getmsg in thread_db_create_event
-   will fail when debugging multi-threaded applications.  */
-
-static CORE_ADDR
-cris_reinsert_addr (void)
-{
-  struct regcache *regcache = get_thread_regcache (current_inferior, 1);
-  unsigned long pc;
-  collect_register_by_name (regcache, "srp", &pc);
-  return pc;
-}
-
 static void
 cris_write_data_breakpoint (struct regcache *regcache,
                            int bp, unsigned long start, unsigned long end)
@@ -139,7 +135,22 @@ cris_write_data_breakpoint (struct regcache *regcache,
 }
 
 static int
-cris_insert_point (char type, CORE_ADDR addr, int len)
+cris_supports_z_point_type (char z_type)
+{
+  switch (z_type)
+    {
+    case Z_PACKET_WRITE_WP:
+    case Z_PACKET_READ_WP:
+    case Z_PACKET_ACCESS_WP:
+      return 1;
+    default:
+      return 0;
+    }
+}
+
+static int
+cris_insert_point (enum raw_bkpt_type type, CORE_ADDR addr,
+                  int len, struct raw_breakpoint *bp)
 {
   int bp;
   unsigned long bp_ctrl;
@@ -147,26 +158,12 @@ cris_insert_point (char type, CORE_ADDR addr, int len)
   unsigned long ccs;
   struct regcache *regcache;
 
-  /* Breakpoint/watchpoint types (GDB terminology):
-     0 = memory breakpoint for instructions
-     (not supported; done via memory write instead)
-     1 = hardware breakpoint for instructions (not supported)
-     2 = write watchpoint (supported)
-     3 = read watchpoint (supported)
-     4 = access watchpoint (supported).  */
-
-  if (type < '2' || type > '4')
-    {
-      /* Unsupported.  */
-      return 1;
-    }
-
-  regcache = get_thread_regcache (current_inferior, 1);
+  regcache = get_thread_regcache (current_thread, 1);
 
   /* Read watchpoints are set as access watchpoints, because of GDB's
      inability to deal with pure read watchpoints.  */
-  if (type == '3')
-    type = '4';
+  if (type == raw_bkpt_type_read_wp)
+    type = raw_bkpt_type_access_wp;
 
   /* Get the configuration register.  */
   collect_register_by_name (regcache, "s0", &bp_ctrl);
@@ -195,12 +192,12 @@ cris_insert_point (char type, CORE_ADDR addr, int len)
     }
 
   /* Configure the control register first.  */
-  if (type == '3' || type == '4')
+  if (type == raw_bkpt_type_read_wp || type == raw_bkpt_type_access_wp)
     {
       /* Trigger on read.  */
       bp_ctrl |= (1 << (2 + bp * 4));
     }
-  if (type == '2' || type == '4')
+  if (type == raw_bkpt_type_write_wp || type == raw_bkpt_type_access_wp)
     {
       /* Trigger on write.  */
       bp_ctrl |= (2 << (2 + bp * 4));
@@ -225,7 +222,8 @@ cris_insert_point (char type, CORE_ADDR addr, int len)
 }
 
 static int
-cris_remove_point (char type, CORE_ADDR addr, int len)
+cris_remove_point (enum raw_bkpt_type type, CORE_ADDR addr, int len,
+                  struct raw_breakpoint *bp)
 {
   int bp;
   unsigned long bp_ctrl;
@@ -233,22 +231,12 @@ cris_remove_point (char type, CORE_ADDR addr, int len)
   struct regcache *regcache;
   unsigned long bp_d_regs[12];
 
-  /* Breakpoint/watchpoint types:
-     0 = memory breakpoint for instructions
-     (not supported; done via memory write instead)
-     1 = hardware breakpoint for instructions (not supported)
-     2 = write watchpoint (supported)
-     3 = read watchpoint (supported)
-     4 = access watchpoint (supported).  */
-  if (type < '2' || type > '4')
-    return -1;
-
-  regcache = get_thread_regcache (current_inferior, 1);
+  regcache = get_thread_regcache (current_thread, 1);
 
   /* Read watchpoints are set as access watchpoints, because of GDB's
      inability to deal with pure read watchpoints.  */
-  if (type == '3')
-    type = '4';
+  if (type == raw_bkpt_type_read_wp)
+    type = raw_bkpt_type_access_wp;
 
   /* Get the configuration register.  */
   collect_register_by_name (regcache, "s0", &bp_ctrl);
@@ -285,9 +273,9 @@ cris_remove_point (char type, CORE_ADDR addr, int len)
        /* Read/write bits for this BP.  */
        rw_bits = (bp_ctrl & (0x3 << bitpos)) >> bitpos;
 
-       if ((type == '3' && rw_bits == 0x1)
-           || (type == '2' && rw_bits == 0x2)
-           || (type == '4' && rw_bits == 0x3))
+       if ((type == raw_bkpt_type_read_wp && rw_bits == 0x1)
+           || (type == raw_bkpt_type_write_wp && rw_bits == 0x2)
+           || (type == raw_bkpt_type_access_wp && rw_bits == 0x3))
          {
            /* Read/write matched.  */
            break;
@@ -320,7 +308,7 @@ static int
 cris_stopped_by_watchpoint (void)
 {
   unsigned long exs;
-  struct regcache *regcache = get_thread_regcache (current_inferior, 1);
+  struct regcache *regcache = get_thread_regcache (current_thread, 1);
 
   collect_register_by_name (regcache, "exs", &exs);
 
@@ -331,7 +319,7 @@ static CORE_ADDR
 cris_stopped_data_address (void)
 {
   unsigned long eda;
-  struct regcache *regcache = get_thread_regcache (current_inferior, 1);
+  struct regcache *regcache = get_thread_regcache (current_thread, 1);
 
   collect_register_by_name (regcache, "eda", &eda);
 
@@ -339,6 +327,20 @@ cris_stopped_data_address (void)
   return eda;
 }
 
+ps_err_e
+ps_get_thread_area (const struct ps_prochandle *ph,
+                    lwpid_t lwpid, int idx, void **base)
+{
+  if (ptrace (PTRACE_GET_THREAD_AREA, lwpid, NULL, base) != 0)
+    return PS_ERR;
+
+  /* IDX is the bias from the thread pointer to the beginning of the
+     thread descriptor.  It has to be subtracted due to implementation
+     quirks in libthread_db.  */
+  *base = (void *) ((char *) *base - idx);
+  return PS_OK;
+}
+
 static void
 cris_fill_gregset (struct regcache *regcache, void *buf)
 {
@@ -369,12 +371,18 @@ cris_arch_setup (void)
   current_process ()->tdesc = tdesc_crisv32;
 }
 
-typedef unsigned long elf_gregset_t[cris_num_regs];
+/* Support for hardware single step.  */
+
+static int
+cris_supports_hardware_single_step (void)
+{
+  return 1;
+}
 
 static struct regset_info cris_regsets[] = {
   { PTRACE_GETREGS, PTRACE_SETREGS, 0, cris_num_regs * 4,
     GENERAL_REGS, cris_fill_gregset, cris_store_gregset },
-  { 0, 0, 0, -1, -1, NULL, NULL }
+  NULL_REGSET
 };
 
 
@@ -412,21 +420,38 @@ struct linux_target_ops the_low_target = {
   NULL, /* fetch_register */
   cris_get_pc,
   cris_set_pc,
-  (const unsigned char *) &cris_breakpoint,
-  cris_breakpoint_len,
-  cris_reinsert_addr,
+  NULL, /* breakpoint_kind_from_pc */
+  cris_sw_breakpoint_from_kind,
+  NULL, /* breakpoint_reinsert_addr */
   0,
   cris_breakpoint_at,
+  cris_supports_z_point_type,
   cris_insert_point,
   cris_remove_point,
   cris_stopped_by_watchpoint,
   cris_stopped_data_address,
+  NULL, /* collect_ptrace_register */
+  NULL, /* supply_ptrace_register */
+  NULL, /* siginfo_fixup */
+  NULL, /* new_process */
+  NULL, /* new_thread */
+  NULL, /* new_fork */
+  NULL, /* prepare_to_resume */
+  NULL, /* process_qsupported */
+  NULL, /* supports_tracepoints */
+  NULL, /* get_thread_area */
+  NULL, /* install_fast_tracepoint_jump_pad */
+  NULL, /* emit_ops */
+  NULL, /* get_min_fast_tracepoint_insn_len */
+  NULL, /* supports_range_stepping */
+  NULL, /* breakpoint_kind_from_current_state */
+  cris_supports_hardware_single_step,
 };
 
 void
 initialize_low_arch (void)
 {
-  init_register_crisv32 ();
+  init_registers_crisv32 ();
 
   initialize_regsets_info (&cris_regsets_info);
 }
This page took 0.027391 seconds and 4 git commands to generate.