Boston, MA 02111-1307, USA. */
#include "defs.h"
-#include "frame.h"
#include "bfd.h"
#include "inferior.h"
-#include "value.h"
#include "regcache.h"
#include "completer.h"
-#include "language.h"
#include "osabi.h"
#include "gdb_assert.h"
-#include "infttrace.h"
+#include "arch-utils.h"
/* For argument passing to the inferior */
#include "symtab.h"
-#include "infcall.h"
#include "dis-asm.h"
-
-#ifdef USG
-#include <sys/types.h>
-#endif
-
-#include <dl.h>
-#include <sys/param.h>
-#include <signal.h>
-
-#include <sys/ptrace.h>
-#include <machine/save_state.h>
-
-#ifdef COFF_ENCAPSULATE
-#include "a.out.encap.h"
-#else
-#endif
-
-/*#include <sys/user.h> After a.out.h */
-#include <sys/file.h>
-#include "gdb_stat.h"
-#include "gdb_wait.h"
+#include "trad-frame.h"
+#include "frame-unwind.h"
+#include "frame-base.h"
#include "gdbcore.h"
#include "gdbcmd.h"
-#include "target.h"
-#include "symfile.h"
#include "objfiles.h"
#include "hppa-tdep.h"
+static int hppa_debug = 0;
+
/* Some local constants. */
static const int hppa32_num_regs = 128;
static const int hppa64_num_regs = 96;
-static const int hppa64_call_dummy_breakpoint_offset = 22 * 4;
-
-/* DEPRECATED_CALL_DUMMY_LENGTH is computed based on the size of a
- word on the target machine, not the size of an instruction. Since
- a word on this target holds two instructions we have to divide the
- instruction size by two to get the word size of the dummy. */
-static const int hppa32_call_dummy_length = INSTRUCTION_SIZE * 28;
-static const int hppa64_call_dummy_length = INSTRUCTION_SIZE * 26 / 2;
+/* hppa-specific object data -- unwind and solib info.
+ TODO/maybe: think about splitting this into two parts; the unwind data is
+ common to all hppa targets, but is only used in this file; we can register
+ that separately and make this static. The solib data is probably hpux-
+ specific, so we can create a separate extern objfile_data that is registered
+ by hppa-hpux-tdep.c and shared with pa64solib.c and somsolib.c. */
+const struct objfile_data *hppa_objfile_priv_data = NULL;
/* Get at various relevent fields of an instruction word. */
#define MASK_5 0x1f
#define MASK_14 0x3fff
#define MASK_21 0x1fffff
-/* Define offsets into the call dummy for the target function address.
- See comments related to CALL_DUMMY for more info. */
-#define FUNC_LDIL_OFFSET (INSTRUCTION_SIZE * 9)
-#define FUNC_LDO_OFFSET (INSTRUCTION_SIZE * 10)
-
-/* Define offsets into the call dummy for the _sr4export address.
- See comments related to CALL_DUMMY for more info. */
-#define SR4EXPORT_LDIL_OFFSET (INSTRUCTION_SIZE * 12)
-#define SR4EXPORT_LDO_OFFSET (INSTRUCTION_SIZE * 13)
-
-/* To support detection of the pseudo-initial frame
- that threads have. */
-#define THREAD_INITIAL_FRAME_SYMBOL "__pthread_exit"
-#define THREAD_INITIAL_FRAME_SYM_LEN sizeof(THREAD_INITIAL_FRAME_SYMBOL)
-
/* Sizes (in bytes) of the native unwind entries. */
#define UNWIND_ENTRY_SIZE 16
#define STUB_UNWIND_ENTRY_SIZE 8
-static int get_field (unsigned word, int from, int to);
-
-static int extract_5_load (unsigned int);
-
-static unsigned extract_5R_store (unsigned int);
-
-static unsigned extract_5r_store (unsigned int);
-
-static void find_dummy_frame_regs (struct frame_info *, CORE_ADDR *);
-
-static int find_proc_framesize (CORE_ADDR);
-
-static int find_return_regnum (CORE_ADDR);
-
-struct unwind_table_entry *find_unwind_entry (CORE_ADDR);
-
-static int extract_17 (unsigned int);
-
-static unsigned deposit_21 (unsigned int, unsigned int);
-
-static int extract_21 (unsigned);
-
-static unsigned deposit_14 (int, unsigned int);
-
-static int extract_14 (unsigned);
-
-static void unwind_command (char *, int);
-
-static int low_sign_extend (unsigned int, unsigned int);
-
-static int sign_extend (unsigned int, unsigned int);
-
-static int restore_pc_queue (CORE_ADDR *);
-
-static int hppa_alignof (struct type *);
-
-static int prologue_inst_adjust_sp (unsigned long);
-
-static int is_branch (unsigned long);
-
-static int inst_saves_gr (unsigned long);
-
-static int inst_saves_fr (unsigned long);
-
-static int pc_in_interrupt_handler (CORE_ADDR);
-
-static int pc_in_linker_stub (CORE_ADDR);
-
-static int compare_unwind_entries (const void *, const void *);
-
-static void read_unwind_info (struct objfile *);
-
-static void internalize_unwinds (struct objfile *,
- struct unwind_table_entry *,
- asection *, unsigned int,
- unsigned int, CORE_ADDR);
-static void pa_print_registers (char *, int, int);
-static void pa_strcat_registers (char *, int, int, struct ui_file *);
-static void pa_register_look_aside (char *, int, long *);
-static void pa_print_fp_reg (int);
-static void pa_strcat_fp_reg (int, struct ui_file *, enum precision_type);
-static void record_text_segment_lowaddr (bfd *, asection *, void *);
/* FIXME: brobecker 2002-11-07: We will likely be able to make the
following functions static, once we hppa is partially multiarched. */
-int hppa_reg_struct_has_addr (int gcc_p, struct type *type);
-CORE_ADDR hppa_skip_prologue (CORE_ADDR pc);
-CORE_ADDR hppa_skip_trampoline_code (CORE_ADDR pc);
-int hppa_in_solib_call_trampoline (CORE_ADDR pc, char *name);
-int hppa_in_solib_return_trampoline (CORE_ADDR pc, char *name);
-CORE_ADDR hppa_saved_pc_after_call (struct frame_info *frame);
-int hppa_inner_than (CORE_ADDR lhs, CORE_ADDR rhs);
-CORE_ADDR hppa32_stack_align (CORE_ADDR sp);
-CORE_ADDR hppa64_stack_align (CORE_ADDR sp);
int hppa_pc_requires_run_before_use (CORE_ADDR pc);
-int hppa_instruction_nullified (void);
-int hppa_register_raw_size (int reg_nr);
-int hppa_register_byte (int reg_nr);
-struct type * hppa32_register_virtual_type (int reg_nr);
-struct type * hppa64_register_virtual_type (int reg_nr);
-void hppa_store_struct_return (CORE_ADDR addr, CORE_ADDR sp);
-void hppa32_extract_return_value (struct type *type, char *regbuf,
- char *valbuf);
-void hppa64_extract_return_value (struct type *type, char *regbuf,
- char *valbuf);
-int hppa32_use_struct_convention (int gcc_p, struct type *type);
-int hppa64_use_struct_convention (int gcc_p, struct type *type);
-void hppa32_store_return_value (struct type *type, char *valbuf);
-void hppa64_store_return_value (struct type *type, char *valbuf);
-int hppa_cannot_store_register (int regnum);
-void hppa_init_extra_frame_info (int fromleaf, struct frame_info *frame);
-CORE_ADDR hppa_frame_chain (struct frame_info *frame);
-int hppa_frame_chain_valid (CORE_ADDR chain, struct frame_info *thisframe);
-int hppa_frameless_function_invocation (struct frame_info *frame);
-CORE_ADDR hppa_frame_saved_pc (struct frame_info *frame);
-CORE_ADDR hppa_frame_args_address (struct frame_info *fi);
-int hppa_frame_num_args (struct frame_info *frame);
-void hppa_push_dummy_frame (void);
-void hppa_pop_frame (void);
-CORE_ADDR hppa_fix_call_dummy (char *dummy, CORE_ADDR pc, CORE_ADDR fun,
- int nargs, struct value **args,
- struct type *type, int gcc_p);
-CORE_ADDR hppa_push_arguments (int nargs, struct value **args, CORE_ADDR sp,
- int struct_return, CORE_ADDR struct_addr);
-CORE_ADDR hppa_smash_text_address (CORE_ADDR addr);
-CORE_ADDR hppa_target_read_pc (ptid_t ptid);
-void hppa_target_write_pc (CORE_ADDR v, ptid_t ptid);
-CORE_ADDR hppa_target_read_fp (void);
-
-typedef struct
- {
- struct minimal_symbol *msym;
- CORE_ADDR solib_handle;
- CORE_ADDR return_val;
- }
-args_for_find_stub;
-
-static int cover_find_stub_with_shl_get (void *);
-
-static int is_pa_2 = 0; /* False */
-/* This is declared in symtab.c; set to 1 in hp-symtab-read.c */
-extern int hp_som_som_object_present;
+/* Handle 32/64-bit struct return conventions. */
-/* In breakpoint.c */
-extern int exception_catchpoints_are_fragile;
-
-/* Should call_function allocate stack space for a struct return? */
-
-int
-hppa32_use_struct_convention (int gcc_p, struct type *type)
-{
- return (TYPE_LENGTH (type) > 2 * DEPRECATED_REGISTER_SIZE);
-}
-
-/* Same as hppa32_use_struct_convention() for the PA64 ABI. */
-
-int
-hppa64_use_struct_convention (int gcc_p, struct type *type)
+static enum return_value_convention
+hppa32_return_value (struct gdbarch *gdbarch,
+ struct type *type, struct regcache *regcache,
+ void *readbuf, const void *writebuf)
{
- /* RM: struct upto 128 bits are returned in registers */
- return TYPE_LENGTH (type) > 16;
+ if (TYPE_LENGTH (type) <= 2 * 4)
+ {
+ /* The value always lives in the right hand end of the register
+ (or register pair)? */
+ int b;
+ int reg = TYPE_CODE (type) == TYPE_CODE_FLT ? HPPA_FP4_REGNUM : 28;
+ int part = TYPE_LENGTH (type) % 4;
+ /* The left hand register contains only part of the value,
+ transfer that first so that the rest can be xfered as entire
+ 4-byte registers. */
+ if (part > 0)
+ {
+ if (readbuf != NULL)
+ regcache_cooked_read_part (regcache, reg, 4 - part,
+ part, readbuf);
+ if (writebuf != NULL)
+ regcache_cooked_write_part (regcache, reg, 4 - part,
+ part, writebuf);
+ reg++;
+ }
+ /* Now transfer the remaining register values. */
+ for (b = part; b < TYPE_LENGTH (type); b += 4)
+ {
+ if (readbuf != NULL)
+ regcache_cooked_read (regcache, reg, (char *) readbuf + b);
+ if (writebuf != NULL)
+ regcache_cooked_write (regcache, reg, (const char *) writebuf + b);
+ reg++;
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+ else
+ return RETURN_VALUE_STRUCT_CONVENTION;
+}
+
+static enum return_value_convention
+hppa64_return_value (struct gdbarch *gdbarch,
+ struct type *type, struct regcache *regcache,
+ void *readbuf, const void *writebuf)
+{
+ /* RM: Floats are returned in FR4R, doubles in FR4. Integral values
+ are in r28, padded on the left. Aggregates less that 65 bits are
+ in r28, right padded. Aggregates upto 128 bits are in r28 and
+ r29, right padded. */
+ if (TYPE_CODE (type) == TYPE_CODE_FLT
+ && TYPE_LENGTH (type) <= 8)
+ {
+ /* Floats are right aligned? */
+ int offset = register_size (gdbarch, HPPA_FP4_REGNUM) - TYPE_LENGTH (type);
+ if (readbuf != NULL)
+ regcache_cooked_read_part (regcache, HPPA_FP4_REGNUM, offset,
+ TYPE_LENGTH (type), readbuf);
+ if (writebuf != NULL)
+ regcache_cooked_write_part (regcache, HPPA_FP4_REGNUM, offset,
+ TYPE_LENGTH (type), writebuf);
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+ else if (TYPE_LENGTH (type) <= 8 && is_integral_type (type))
+ {
+ /* Integrals are right aligned. */
+ int offset = register_size (gdbarch, HPPA_FP4_REGNUM) - TYPE_LENGTH (type);
+ if (readbuf != NULL)
+ regcache_cooked_read_part (regcache, 28, offset,
+ TYPE_LENGTH (type), readbuf);
+ if (writebuf != NULL)
+ regcache_cooked_write_part (regcache, 28, offset,
+ TYPE_LENGTH (type), writebuf);
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+ else if (TYPE_LENGTH (type) <= 2 * 8)
+ {
+ /* Composite values are left aligned. */
+ int b;
+ for (b = 0; b < TYPE_LENGTH (type); b += 8)
+ {
+ int part = min (8, TYPE_LENGTH (type) - b);
+ if (readbuf != NULL)
+ regcache_cooked_read_part (regcache, 28 + b / 8, 0, part,
+ (char *) readbuf + b);
+ if (writebuf != NULL)
+ regcache_cooked_write_part (regcache, 28 + b / 8, 0, part,
+ (const char *) writebuf + b);
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+ else
+ return RETURN_VALUE_STRUCT_CONVENTION;
}
/* Routines to extract various sized constants out of hppa
/* This assumes that no garbage lies outside of the lower bits of
value. */
-static int
-sign_extend (unsigned val, unsigned bits)
+int
+hppa_sign_extend (unsigned val, unsigned bits)
{
return (int) (val >> (bits - 1) ? (-1 << bits) | val : val);
}
/* For many immediate values the sign bit is the low bit! */
-static int
-low_sign_extend (unsigned val, unsigned bits)
+int
+hppa_low_hppa_sign_extend (unsigned val, unsigned bits)
{
return (int) ((val & 0x1 ? (-1 << (bits - 1)) : 0) | val >> 1);
}
/* Extract the bits at positions between FROM and TO, using HP's numbering
(MSB = 0). */
-static int
-get_field (unsigned word, int from, int to)
+int
+hppa_get_field (unsigned word, int from, int to)
{
return ((word) >> (31 - (to)) & ((1 << ((to) - (from) + 1)) - 1));
}
/* extract the immediate field from a ld{bhw}s instruction */
-static int
-extract_5_load (unsigned word)
+int
+hppa_extract_5_load (unsigned word)
{
- return low_sign_extend (word >> 16 & MASK_5, 5);
+ return hppa_low_hppa_sign_extend (word >> 16 & MASK_5, 5);
}
/* extract the immediate field from a break instruction */
-static unsigned
-extract_5r_store (unsigned word)
+unsigned
+hppa_extract_5r_store (unsigned word)
{
return (word & MASK_5);
}
/* extract the immediate field from a {sr}sm instruction */
-static unsigned
-extract_5R_store (unsigned word)
+unsigned
+hppa_extract_5R_store (unsigned word)
{
return (word >> 16 & MASK_5);
}
/* extract a 14 bit immediate field */
-static int
-extract_14 (unsigned word)
-{
- return low_sign_extend (word & MASK_14, 14);
-}
-
-/* deposit a 14 bit constant in a word */
-
-static unsigned
-deposit_14 (int opnd, unsigned word)
+int
+hppa_extract_14 (unsigned word)
{
- unsigned sign = (opnd < 0 ? 1 : 0);
-
- return word | ((unsigned) opnd << 1 & MASK_14) | sign;
+ return hppa_low_hppa_sign_extend (word & MASK_14, 14);
}
/* extract a 21 bit constant */
-static int
-extract_21 (unsigned word)
+int
+hppa_extract_21 (unsigned word)
{
int val;
word &= MASK_21;
word <<= 11;
- val = get_field (word, 20, 20);
+ val = hppa_get_field (word, 20, 20);
val <<= 11;
- val |= get_field (word, 9, 19);
+ val |= hppa_get_field (word, 9, 19);
val <<= 2;
- val |= get_field (word, 5, 6);
+ val |= hppa_get_field (word, 5, 6);
val <<= 5;
- val |= get_field (word, 0, 4);
- val <<= 2;
- val |= get_field (word, 7, 8);
- return sign_extend (val, 21) << 11;
-}
-
-/* deposit a 21 bit constant in a word. Although 21 bit constants are
- usually the top 21 bits of a 32 bit constant, we assume that only
- the low 21 bits of opnd are relevant */
-
-static unsigned
-deposit_21 (unsigned opnd, unsigned word)
-{
- unsigned val = 0;
-
- val |= get_field (opnd, 11 + 14, 11 + 18);
+ val |= hppa_get_field (word, 0, 4);
val <<= 2;
- val |= get_field (opnd, 11 + 12, 11 + 13);
- val <<= 2;
- val |= get_field (opnd, 11 + 19, 11 + 20);
- val <<= 11;
- val |= get_field (opnd, 11 + 1, 11 + 11);
- val <<= 1;
- val |= get_field (opnd, 11 + 0, 11 + 0);
- return word | val;
+ val |= hppa_get_field (word, 7, 8);
+ return hppa_sign_extend (val, 21) << 11;
}
/* extract a 17 bit constant from branch instructions, returning the
19 bit signed value. */
-static int
-extract_17 (unsigned word)
+int
+hppa_extract_17 (unsigned word)
{
- return sign_extend (get_field (word, 19, 28) |
- get_field (word, 29, 29) << 10 |
- get_field (word, 11, 15) << 11 |
+ return hppa_sign_extend (hppa_get_field (word, 19, 28) |
+ hppa_get_field (word, 29, 29) << 10 |
+ hppa_get_field (word, 11, 15) << 11 |
(word & 0x1) << 16, 17) << 2;
}
+
+CORE_ADDR
+hppa_symbol_address(const char *sym)
+{
+ struct minimal_symbol *minsym;
+
+ minsym = lookup_minimal_symbol (sym, NULL, NULL);
+ if (minsym)
+ return SYMBOL_VALUE_ADDRESS (minsym);
+ else
+ return (CORE_ADDR)-1;
+}
\f
/* Compare the start address for two unwind entries returning 1 if
return 0;
}
-static CORE_ADDR low_text_segment_address;
-
static void
-record_text_segment_lowaddr (bfd *abfd, asection *section, void *ignored)
+record_text_segment_lowaddr (bfd *abfd, asection *section, void *data)
{
- if (((section->flags & (SEC_ALLOC | SEC_LOAD | SEC_READONLY))
+ if ((section->flags & (SEC_ALLOC | SEC_LOAD | SEC_READONLY))
== (SEC_ALLOC | SEC_LOAD | SEC_READONLY))
- && section->vma < low_text_segment_address)
- low_text_segment_address = section->vma;
+ {
+ bfd_vma value = section->vma - section->filepos;
+ CORE_ADDR *low_text_segment_address = (CORE_ADDR *)data;
+
+ if (value < *low_text_segment_address)
+ *low_text_segment_address = value;
+ }
}
static void
{
/* We will read the unwind entries into temporary memory, then
fill in the actual unwind table. */
+
if (size > 0)
{
unsigned long tmp;
unsigned i;
char *buf = alloca (size);
+ CORE_ADDR low_text_segment_address;
- low_text_segment_address = -1;
-
- /* If addresses are 64 bits wide, then unwinds are supposed to
+ /* For ELF targets, then unwinds are supposed to
be segment relative offsets instead of absolute addresses.
Note that when loading a shared library (text_offset != 0) the
unwinds are already relative to the text_offset that will be
passed in. */
- if (TARGET_PTR_BIT == 64 && text_offset == 0)
+ if (gdbarch_tdep (current_gdbarch)->is_elf && text_offset == 0)
{
+ low_text_segment_address = -1;
+
bfd_map_over_sections (objfile->obfd,
- record_text_segment_lowaddr, NULL);
+ record_text_segment_lowaddr,
+ &low_text_segment_address);
- /* ?!? Mask off some low bits. Should this instead subtract
- out the lowest section's filepos or something like that?
- This looks very hokey to me. */
- low_text_segment_address &= ~0xfff;
- text_offset += low_text_segment_address;
+ text_offset = low_text_segment_address;
+ }
+ else if (gdbarch_tdep (current_gdbarch)->solib_get_text_base)
+ {
+ text_offset = gdbarch_tdep (current_gdbarch)->solib_get_text_base (objfile);
}
bfd_get_section_contents (objfile->obfd, section, buf, 0, size);
unsigned index, unwind_entries;
unsigned stub_entries, total_entries;
CORE_ADDR text_offset;
- struct obj_unwind_info *ui;
- obj_private_data_t *obj_private;
+ struct hppa_unwind_info *ui;
+ struct hppa_objfile_private *obj_private;
text_offset = ANOFFSET (objfile->section_offsets, 0);
- ui = (struct obj_unwind_info *) obstack_alloc (&objfile->objfile_obstack,
- sizeof (struct obj_unwind_info));
+ ui = (struct hppa_unwind_info *) obstack_alloc (&objfile->objfile_obstack,
+ sizeof (struct hppa_unwind_info));
ui->table = NULL;
ui->cache = NULL;
compare_unwind_entries);
/* Keep a pointer to the unwind information. */
- if (objfile->obj_private == NULL)
- {
- obj_private = (obj_private_data_t *)
- obstack_alloc (&objfile->objfile_obstack,
- sizeof (obj_private_data_t));
+ obj_private = (struct hppa_objfile_private *)
+ objfile_data (objfile, hppa_objfile_priv_data);
+ if (obj_private == NULL)
+ {
+ obj_private = (struct hppa_objfile_private *)
+ obstack_alloc (&objfile->objfile_obstack,
+ sizeof (struct hppa_objfile_private));
+ set_objfile_data (objfile, hppa_objfile_priv_data, obj_private);
obj_private->unwind_info = NULL;
obj_private->so_info = NULL;
obj_private->dp = 0;
-
- objfile->obj_private = obj_private;
}
- obj_private = (obj_private_data_t *) objfile->obj_private;
obj_private->unwind_info = ui;
}
{
int first, middle, last;
struct objfile *objfile;
+ struct hppa_objfile_private *priv;
+
+ if (hppa_debug)
+ fprintf_unfiltered (gdb_stdlog, "{ find_unwind_entry 0x%s -> ",
+ paddr_nz (pc));
/* A function at address 0? Not in HP-UX! */
if (pc == (CORE_ADDR) 0)
- return NULL;
+ {
+ if (hppa_debug)
+ fprintf_unfiltered (gdb_stdlog, "NULL }\n");
+ return NULL;
+ }
ALL_OBJFILES (objfile)
{
- struct obj_unwind_info *ui;
+ struct hppa_unwind_info *ui;
ui = NULL;
- if (objfile->obj_private)
- ui = ((obj_private_data_t *) (objfile->obj_private))->unwind_info;
+ priv = objfile_data (objfile, hppa_objfile_priv_data);
+ if (priv)
+ ui = ((struct hppa_objfile_private *) priv)->unwind_info;
if (!ui)
{
read_unwind_info (objfile);
- if (objfile->obj_private == NULL)
+ priv = objfile_data (objfile, hppa_objfile_priv_data);
+ if (priv == NULL)
error ("Internal error reading unwind information.");
- ui = ((obj_private_data_t *) (objfile->obj_private))->unwind_info;
+ ui = ((struct hppa_objfile_private *) priv)->unwind_info;
}
/* First, check the cache */
if (ui->cache
&& pc >= ui->cache->region_start
&& pc <= ui->cache->region_end)
- return ui->cache;
+ {
+ if (hppa_debug)
+ fprintf_unfiltered (gdb_stdlog, "0x%s (cached) }\n",
+ paddr_nz ((CORE_ADDR) ui->cache));
+ return ui->cache;
+ }
/* Not in the cache, do a binary search */
&& pc <= ui->table[middle].region_end)
{
ui->cache = &ui->table[middle];
+ if (hppa_debug)
+ fprintf_unfiltered (gdb_stdlog, "0x%s }\n",
+ paddr_nz ((CORE_ADDR) ui->cache));
return &ui->table[middle];
}
first = middle + 1;
}
} /* ALL_OBJFILES() */
+
+ if (hppa_debug)
+ fprintf_unfiltered (gdb_stdlog, "NULL (not found) }\n");
+
return NULL;
}
-const unsigned char *
+/* The epilogue is defined here as the area either on the `bv' instruction
+ itself or an instruction which destroys the function's stack frame.
+
+ We do not assume that the epilogue is at the end of a function as we can
+ also have return sequences in the middle of a function. */
+static int
+hppa_in_function_epilogue_p (struct gdbarch *gdbarch, CORE_ADDR pc)
+{
+ unsigned long status;
+ unsigned int inst;
+ char buf[4];
+ int off;
+
+ status = deprecated_read_memory_nobpt (pc, buf, 4);
+ if (status != 0)
+ return 0;
+
+ inst = extract_unsigned_integer (buf, 4);
+
+ /* The most common way to perform a stack adjustment ldo X(sp),sp
+ We are destroying a stack frame if the offset is negative. */
+ if ((inst & 0xffffc000) == 0x37de0000
+ && hppa_extract_14 (inst) < 0)
+ return 1;
+
+ /* ldw,mb D(sp),X or ldd,mb D(sp),X */
+ if (((inst & 0x0fc010e0) == 0x0fc010e0
+ || (inst & 0x0fc010e0) == 0x0fc010e0)
+ && hppa_extract_14 (inst) < 0)
+ return 1;
+
+ /* bv %r0(%rp) or bv,n %r0(%rp) */
+ if (inst == 0xe840c000 || inst == 0xe840c002)
+ return 1;
+
+ return 0;
+}
+
+static const unsigned char *
hppa_breakpoint_from_pc (CORE_ADDR *pc, int *len)
{
- static const char breakpoint[] = {0x00, 0x01, 0x00, 0x04};
+ static const unsigned char breakpoint[] = {0x00, 0x01, 0x00, 0x04};
(*len) = sizeof (breakpoint);
return breakpoint;
}
/* Return the name of a register. */
-const char *
+static const char *
hppa32_register_name (int i)
{
static char *names[] = {
return names[i];
}
-const char *
+static const char *
hppa64_register_name (int i)
{
static char *names[] = {
return names[i];
}
+/* This function pushes a stack frame with arguments as part of the
+ inferior function calling mechanism.
+ This is the version of the function for the 32-bit PA machines, in
+ which later arguments appear at lower addresses. (The stack always
+ grows towards higher addresses.)
-/* Return the adjustment necessary to make for addresses on the stack
- as presented by hpread.c.
-
- This is necessary because of the stack direction on the PA and the
- bizarre way in which someone (?) decided they wanted to handle
- frame pointerless code in GDB. */
-int
-hpread_adjust_stack_address (CORE_ADDR func_addr)
-{
- struct unwind_table_entry *u;
-
- u = find_unwind_entry (func_addr);
- if (!u)
- return 0;
- else
- return u->Total_frame_size << 3;
-}
+ We simply allocate the appropriate amount of stack space and put
+ arguments into their proper slots. */
+
+static CORE_ADDR
+hppa32_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
+ struct regcache *regcache, CORE_ADDR bp_addr,
+ int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
+{
+ /* Stack base address at which any pass-by-reference parameters are
+ stored. */
+ CORE_ADDR struct_end = 0;
+ /* Stack base address at which the first parameter is stored. */
+ CORE_ADDR param_end = 0;
+
+ /* The inner most end of the stack after all the parameters have
+ been pushed. */
+ CORE_ADDR new_sp = 0;
+
+ /* Two passes. First pass computes the location of everything,
+ second pass writes the bytes out. */
+ int write_pass;
+
+ /* Global pointer (r19) of the function we are trying to call. */
+ CORE_ADDR gp;
+
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
+ for (write_pass = 0; write_pass < 2; write_pass++)
+ {
+ CORE_ADDR struct_ptr = 0;
+ /* The first parameter goes into sp-36, each stack slot is 4-bytes.
+ struct_ptr is adjusted for each argument below, so the first
+ argument will end up at sp-36. */
+ CORE_ADDR param_ptr = 32;
+ int i;
+ int small_struct = 0;
+
+ for (i = 0; i < nargs; i++)
+ {
+ struct value *arg = args[i];
+ struct type *type = check_typedef (value_type (arg));
+ /* The corresponding parameter that is pushed onto the
+ stack, and [possibly] passed in a register. */
+ char param_val[8];
+ int param_len;
+ memset (param_val, 0, sizeof param_val);
+ if (TYPE_LENGTH (type) > 8)
+ {
+ /* Large parameter, pass by reference. Store the value
+ in "struct" area and then pass its address. */
+ param_len = 4;
+ struct_ptr += align_up (TYPE_LENGTH (type), 8);
+ if (write_pass)
+ write_memory (struct_end - struct_ptr, VALUE_CONTENTS (arg),
+ TYPE_LENGTH (type));
+ store_unsigned_integer (param_val, 4, struct_end - struct_ptr);
+ }
+ else if (TYPE_CODE (type) == TYPE_CODE_INT
+ || TYPE_CODE (type) == TYPE_CODE_ENUM)
+ {
+ /* Integer value store, right aligned. "unpack_long"
+ takes care of any sign-extension problems. */
+ param_len = align_up (TYPE_LENGTH (type), 4);
+ store_unsigned_integer (param_val, param_len,
+ unpack_long (type,
+ VALUE_CONTENTS (arg)));
+ }
+ else if (TYPE_CODE (type) == TYPE_CODE_FLT)
+ {
+ /* Floating point value store, right aligned. */
+ param_len = align_up (TYPE_LENGTH (type), 4);
+ memcpy (param_val, VALUE_CONTENTS (arg), param_len);
+ }
+ else
+ {
+ param_len = align_up (TYPE_LENGTH (type), 4);
+
+ /* Small struct value are stored right-aligned. */
+ memcpy (param_val + param_len - TYPE_LENGTH (type),
+ VALUE_CONTENTS (arg), TYPE_LENGTH (type));
+
+ /* Structures of size 5, 6 and 7 bytes are special in that
+ the higher-ordered word is stored in the lower-ordered
+ argument, and even though it is a 8-byte quantity the
+ registers need not be 8-byte aligned. */
+ if (param_len > 4 && param_len < 8)
+ small_struct = 1;
+ }
-/* Called to determine if PC is in an interrupt handler of some
- kind. */
+ param_ptr += param_len;
+ if (param_len == 8 && !small_struct)
+ param_ptr = align_up (param_ptr, 8);
-static int
-pc_in_interrupt_handler (CORE_ADDR pc)
-{
- struct unwind_table_entry *u;
- struct minimal_symbol *msym_us;
+ /* First 4 non-FP arguments are passed in gr26-gr23.
+ First 4 32-bit FP arguments are passed in fr4L-fr7L.
+ First 2 64-bit FP arguments are passed in fr5 and fr7.
- u = find_unwind_entry (pc);
- if (!u)
- return 0;
+ The rest go on the stack, starting at sp-36, towards lower
+ addresses. 8-byte arguments must be aligned to a 8-byte
+ stack boundary. */
+ if (write_pass)
+ {
+ write_memory (param_end - param_ptr, param_val, param_len);
- /* Oh joys. HPUX sets the interrupt bit for _sigreturn even though
- its frame isn't a pure interrupt frame. Deal with this. */
- msym_us = lookup_minimal_symbol_by_pc (pc);
+ /* There are some cases when we don't know the type
+ expected by the callee (e.g. for variadic functions), so
+ pass the parameters in both general and fp regs. */
+ if (param_ptr <= 48)
+ {
+ int grreg = 26 - (param_ptr - 36) / 4;
+ int fpLreg = 72 + (param_ptr - 36) / 4 * 2;
+ int fpreg = 74 + (param_ptr - 32) / 8 * 4;
+
+ regcache_cooked_write (regcache, grreg, param_val);
+ regcache_cooked_write (regcache, fpLreg, param_val);
+
+ if (param_len > 4)
+ {
+ regcache_cooked_write (regcache, grreg + 1,
+ param_val + 4);
+
+ regcache_cooked_write (regcache, fpreg, param_val);
+ regcache_cooked_write (regcache, fpreg + 1,
+ param_val + 4);
+ }
+ }
+ }
+ }
- return (u->HP_UX_interrupt_marker
- && !PC_IN_SIGTRAMP (pc, DEPRECATED_SYMBOL_NAME (msym_us)));
-}
+ /* Update the various stack pointers. */
+ if (!write_pass)
+ {
+ struct_end = sp + align_up (struct_ptr, 64);
+ /* PARAM_PTR already accounts for all the arguments passed
+ by the user. However, the ABI mandates minimum stack
+ space allocations for outgoing arguments. The ABI also
+ mandates minimum stack alignments which we must
+ preserve. */
+ param_end = struct_end + align_up (param_ptr, 64);
+ }
+ }
-/* Called when no unwind descriptor was found for PC. Returns 1 if it
- appears that PC is in a linker stub.
+ /* If a structure has to be returned, set up register 28 to hold its
+ address */
+ if (struct_return)
+ write_register (28, struct_addr);
- ?!? Need to handle stubs which appear in PA64 code. */
+ gp = tdep->find_global_pointer (function);
-static int
-pc_in_linker_stub (CORE_ADDR pc)
-{
- int found_magic_instruction = 0;
- int i;
- char buf[4];
+ if (gp != 0)
+ write_register (19, gp);
- /* If unable to read memory, assume pc is not in a linker stub. */
- if (target_read_memory (pc, buf, 4) != 0)
- return 0;
+ /* Set the return address. */
+ regcache_cooked_write_unsigned (regcache, HPPA_RP_REGNUM, bp_addr);
- /* We are looking for something like
+ /* Update the Stack Pointer. */
+ regcache_cooked_write_unsigned (regcache, HPPA_SP_REGNUM, param_end);
- ; $$dyncall jams RP into this special spot in the frame (RP')
- ; before calling the "call stub"
- ldw -18(sp),rp
+ return param_end;
+}
- ldsid (rp),r1 ; Get space associated with RP into r1
- mtsp r1,sp ; Move it into space register 0
- be,n 0(sr0),rp) ; back to your regularly scheduled program */
+/* This function pushes a stack frame with arguments as part of the
+ inferior function calling mechanism.
- /* Maximum known linker stub size is 4 instructions. Search forward
- from the given PC, then backward. */
- for (i = 0; i < 4; i++)
- {
- /* If we hit something with an unwind, stop searching this direction. */
+ This is the version for the PA64, in which later arguments appear
+ at higher addresses. (The stack always grows towards higher
+ addresses.)
- if (find_unwind_entry (pc + i * 4) != 0)
- break;
+ We simply allocate the appropriate amount of stack space and put
+ arguments into their proper slots.
- /* Check for ldsid (rp),r1 which is the magic instruction for a
- return from a cross-space function call. */
- if (read_memory_integer (pc + i * 4, 4) == 0x004010a1)
+ This ABI also requires that the caller provide an argument pointer
+ to the callee, so we do that too. */
+
+static CORE_ADDR
+hppa64_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
+ struct regcache *regcache, CORE_ADDR bp_addr,
+ int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
+{
+ /* NOTE: cagney/2004-02-27: This is a guess - its implemented by
+ reverse engineering testsuite failures. */
+
+ /* Stack base address at which any pass-by-reference parameters are
+ stored. */
+ CORE_ADDR struct_end = 0;
+ /* Stack base address at which the first parameter is stored. */
+ CORE_ADDR param_end = 0;
+
+ /* The inner most end of the stack after all the parameters have
+ been pushed. */
+ CORE_ADDR new_sp = 0;
+
+ /* Two passes. First pass computes the location of everything,
+ second pass writes the bytes out. */
+ int write_pass;
+ for (write_pass = 0; write_pass < 2; write_pass++)
+ {
+ CORE_ADDR struct_ptr = 0;
+ CORE_ADDR param_ptr = 0;
+ int i;
+ for (i = 0; i < nargs; i++)
+ {
+ struct value *arg = args[i];
+ struct type *type = check_typedef (value_type (arg));
+ if ((TYPE_CODE (type) == TYPE_CODE_INT
+ || TYPE_CODE (type) == TYPE_CODE_ENUM)
+ && TYPE_LENGTH (type) <= 8)
+ {
+ /* Integer value store, right aligned. "unpack_long"
+ takes care of any sign-extension problems. */
+ param_ptr += 8;
+ if (write_pass)
+ {
+ ULONGEST val = unpack_long (type, VALUE_CONTENTS (arg));
+ int reg = 27 - param_ptr / 8;
+ write_memory_unsigned_integer (param_end - param_ptr,
+ val, 8);
+ if (reg >= 19)
+ regcache_cooked_write_unsigned (regcache, reg, val);
+ }
+ }
+ else
+ {
+ /* Small struct value, store left aligned? */
+ int reg;
+ if (TYPE_LENGTH (type) > 8)
+ {
+ param_ptr = align_up (param_ptr, 16);
+ reg = 26 - param_ptr / 8;
+ param_ptr += align_up (TYPE_LENGTH (type), 16);
+ }
+ else
+ {
+ param_ptr = align_up (param_ptr, 8);
+ reg = 26 - param_ptr / 8;
+ param_ptr += align_up (TYPE_LENGTH (type), 8);
+ }
+ if (write_pass)
+ {
+ int byte;
+ write_memory (param_end - param_ptr, VALUE_CONTENTS (arg),
+ TYPE_LENGTH (type));
+ for (byte = 0; byte < TYPE_LENGTH (type); byte += 8)
+ {
+ if (reg >= 19)
+ {
+ int len = min (8, TYPE_LENGTH (type) - byte);
+ regcache_cooked_write_part (regcache, reg, 0, len,
+ VALUE_CONTENTS (arg) + byte);
+ }
+ reg--;
+ }
+ }
+ }
+ }
+ /* Update the various stack pointers. */
+ if (!write_pass)
{
- found_magic_instruction = 1;
- break;
+ struct_end = sp + struct_ptr;
+ /* PARAM_PTR already accounts for all the arguments passed
+ by the user. However, the ABI mandates minimum stack
+ space allocations for outgoing arguments. The ABI also
+ mandates minimum stack alignments which we must
+ preserve. */
+ param_end = struct_end + max (align_up (param_ptr, 16), 64);
}
- /* Add code to handle long call/branch and argument relocation stubs
- here. */
}
- if (found_magic_instruction != 0)
- return 1;
+ /* If a structure has to be returned, set up register 28 to hold its
+ address */
+ if (struct_return)
+ write_register (28, struct_addr);
- /* Now look backward. */
- for (i = 0; i < 4; i++)
- {
- /* If we hit something with an unwind, stop searching this direction. */
+ /* Set the return address. */
+ regcache_cooked_write_unsigned (regcache, HPPA_RP_REGNUM, bp_addr);
- if (find_unwind_entry (pc - i * 4) != 0)
- break;
+ /* Update the Stack Pointer. */
+ regcache_cooked_write_unsigned (regcache, HPPA_SP_REGNUM, param_end + 64);
- /* Check for ldsid (rp),r1 which is the magic instruction for a
- return from a cross-space function call. */
- if (read_memory_integer (pc - i * 4, 4) == 0x004010a1)
- {
- found_magic_instruction = 1;
- break;
- }
- /* Add code to handle long call/branch and argument relocation stubs
- here. */
- }
- return found_magic_instruction;
+ /* The stack will have 32 bytes of additional space for a frame marker. */
+ return param_end + 64;
}
-static int
-find_return_regnum (CORE_ADDR pc)
+static CORE_ADDR
+hppa32_convert_from_func_ptr_addr (struct gdbarch *gdbarch,
+ CORE_ADDR addr,
+ struct target_ops *targ)
{
- struct unwind_table_entry *u;
-
- u = find_unwind_entry (pc);
-
- if (!u)
- return RP_REGNUM;
+ if (addr & 2)
+ {
+ CORE_ADDR plabel;
- if (u->Millicode)
- return 31;
+ plabel = addr & ~3;
+ target_read_memory(plabel, (char *)&addr, 4);
+ }
- return RP_REGNUM;
+ return addr;
}
-/* Return size of frame, or -1 if we should use a frame pointer. */
-static int
-find_proc_framesize (CORE_ADDR pc)
+static CORE_ADDR
+hppa32_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr)
{
- struct unwind_table_entry *u;
- struct minimal_symbol *msym_us;
+ /* HP frames are 64-byte (or cache line) aligned (yes that's _byte_
+ and not _bit_)! */
+ return align_up (addr, 64);
+}
- /* This may indicate a bug in our callers... */
- if (pc == (CORE_ADDR) 0)
- return -1;
+/* Force all frames to 16-byte alignment. Better safe than sorry. */
- u = find_unwind_entry (pc);
+static CORE_ADDR
+hppa64_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr)
+{
+ /* Just always 16-byte align. */
+ return align_up (addr, 16);
+}
- if (!u)
- {
- if (pc_in_linker_stub (pc))
- /* Linker stubs have a zero size frame. */
- return 0;
- else
- return -1;
- }
+CORE_ADDR
+hppa_read_pc (ptid_t ptid)
+{
+ ULONGEST ipsw;
+ CORE_ADDR pc;
- msym_us = lookup_minimal_symbol_by_pc (pc);
+ ipsw = read_register_pid (HPPA_IPSW_REGNUM, ptid);
+ pc = read_register_pid (HPPA_PCOQ_HEAD_REGNUM, ptid);
- /* If Save_SP is set, and we're not in an interrupt or signal caller,
- then we have a frame pointer. Use it. */
- if (u->Save_SP
- && !pc_in_interrupt_handler (pc)
- && msym_us
- && !PC_IN_SIGTRAMP (pc, DEPRECATED_SYMBOL_NAME (msym_us)))
- return -1;
+ /* If the current instruction is nullified, then we are effectively
+ still executing the previous instruction. Pretend we are still
+ there. This is needed when single stepping; if the nullified
+ instruction is on a different line, we don't want GDB to think
+ we've stepped onto that line. */
+ if (ipsw & 0x00200000)
+ pc -= 4;
- return u->Total_frame_size << 3;
+ return pc & ~0x3;
}
-/* Return offset from sp at which rp is saved, or 0 if not saved. */
-static int rp_saved (CORE_ADDR);
-
-static int
-rp_saved (CORE_ADDR pc)
+void
+hppa_write_pc (CORE_ADDR pc, ptid_t ptid)
{
- struct unwind_table_entry *u;
-
- /* A function at, and thus a return PC from, address 0? Not in HP-UX! */
- if (pc == (CORE_ADDR) 0)
- return 0;
+ write_register_pid (HPPA_PCOQ_HEAD_REGNUM, pc, ptid);
+ write_register_pid (HPPA_PCOQ_TAIL_REGNUM, pc + 4, ptid);
+}
- u = find_unwind_entry (pc);
+/* return the alignment of a type in bytes. Structures have the maximum
+ alignment required by their fields. */
- if (!u)
- {
- if (pc_in_linker_stub (pc))
- /* This is the so-called RP'. */
- return -24;
- else
- return 0;
- }
-
- if (u->Save_RP)
- return (TARGET_PTR_BIT == 64 ? -16 : -20);
- else if (u->stub_unwind.stub_type != 0)
- {
- switch (u->stub_unwind.stub_type)
- {
- case EXPORT:
- case IMPORT:
- return -24;
- case PARAMETER_RELOCATION:
- return -8;
- default:
- return 0;
- }
- }
- else
- return 0;
-}
-\f
-int
-hppa_frameless_function_invocation (struct frame_info *frame)
-{
- struct unwind_table_entry *u;
-
- u = find_unwind_entry (get_frame_pc (frame));
-
- if (u == 0)
- return 0;
-
- return (u->Total_frame_size == 0 && u->stub_unwind.stub_type == 0);
-}
-
-/* Immediately after a function call, return the saved pc.
- Can't go through the frames for this because on some machines
- the new frame is not set up until the new function executes
- some instructions. */
-
-CORE_ADDR
-hppa_saved_pc_after_call (struct frame_info *frame)
-{
- int ret_regnum;
- CORE_ADDR pc;
- struct unwind_table_entry *u;
-
- ret_regnum = find_return_regnum (get_frame_pc (frame));
- pc = read_register (ret_regnum) & ~0x3;
-
- /* If PC is in a linker stub, then we need to dig the address
- the stub will return to out of the stack. */
- u = find_unwind_entry (pc);
- if (u && u->stub_unwind.stub_type != 0)
- return DEPRECATED_FRAME_SAVED_PC (frame);
- else
- return pc;
-}
-\f
-CORE_ADDR
-hppa_frame_saved_pc (struct frame_info *frame)
-{
- CORE_ADDR pc = get_frame_pc (frame);
- struct unwind_table_entry *u;
- CORE_ADDR old_pc = 0;
- int spun_around_loop = 0;
- int rp_offset = 0;
-
- /* BSD, HPUX & OSF1 all lay out the hardware state in the same manner
- at the base of the frame in an interrupt handler. Registers within
- are saved in the exact same order as GDB numbers registers. How
- convienent. */
- if (pc_in_interrupt_handler (pc))
- return read_memory_integer (get_frame_base (frame) + PC_REGNUM * 4,
- TARGET_PTR_BIT / 8) & ~0x3;
-
- if ((get_frame_pc (frame) >= get_frame_base (frame)
- && (get_frame_pc (frame)
- <= (get_frame_base (frame)
- /* A call dummy is sized in words, but it is actually a
- series of instructions. Account for that scaling
- factor. */
- + ((DEPRECATED_REGISTER_SIZE / INSTRUCTION_SIZE)
- * DEPRECATED_CALL_DUMMY_LENGTH)
- /* Similarly we have to account for 64bit wide register
- saves. */
- + (32 * DEPRECATED_REGISTER_SIZE)
- /* We always consider FP regs 8 bytes long. */
- + (NUM_REGS - FP0_REGNUM) * 8
- /* Similarly we have to account for 64bit wide register
- saves. */
- + (6 * DEPRECATED_REGISTER_SIZE)))))
- {
- return read_memory_integer ((get_frame_base (frame)
- + (TARGET_PTR_BIT == 64 ? -16 : -20)),
- TARGET_PTR_BIT / 8) & ~0x3;
- }
-
-#ifdef FRAME_SAVED_PC_IN_SIGTRAMP
- /* Deal with signal handler caller frames too. */
- if ((get_frame_type (frame) == SIGTRAMP_FRAME))
- {
- CORE_ADDR rp;
- FRAME_SAVED_PC_IN_SIGTRAMP (frame, &rp);
- return rp & ~0x3;
- }
-#endif
-
- if (hppa_frameless_function_invocation (frame))
- {
- int ret_regnum;
-
- ret_regnum = find_return_regnum (pc);
-
- /* If the next frame is an interrupt frame or a signal
- handler caller, then we need to look in the saved
- register area to get the return pointer (the values
- in the registers may not correspond to anything useful). */
- if (get_next_frame (frame)
- && ((get_frame_type (get_next_frame (frame)) == SIGTRAMP_FRAME)
- || pc_in_interrupt_handler (get_frame_pc (get_next_frame (frame)))))
- {
- CORE_ADDR *saved_regs;
- hppa_frame_init_saved_regs (get_next_frame (frame));
- saved_regs = deprecated_get_frame_saved_regs (get_next_frame (frame));
- if (read_memory_integer (saved_regs[FLAGS_REGNUM],
- TARGET_PTR_BIT / 8) & 0x2)
- {
- pc = read_memory_integer (saved_regs[31],
- TARGET_PTR_BIT / 8) & ~0x3;
-
- /* Syscalls are really two frames. The syscall stub itself
- with a return pointer in %rp and the kernel call with
- a return pointer in %r31. We return the %rp variant
- if %r31 is the same as frame->pc. */
- if (pc == get_frame_pc (frame))
- pc = read_memory_integer (saved_regs[RP_REGNUM],
- TARGET_PTR_BIT / 8) & ~0x3;
- }
- else
- pc = read_memory_integer (saved_regs[RP_REGNUM],
- TARGET_PTR_BIT / 8) & ~0x3;
- }
- else
- pc = read_register (ret_regnum) & ~0x3;
- }
- else
- {
- spun_around_loop = 0;
- old_pc = pc;
-
- restart:
- rp_offset = rp_saved (pc);
-
- /* Similar to code in frameless function case. If the next
- frame is a signal or interrupt handler, then dig the right
- information out of the saved register info. */
- if (rp_offset == 0
- && get_next_frame (frame)
- && ((get_frame_type (get_next_frame (frame)) == SIGTRAMP_FRAME)
- || pc_in_interrupt_handler (get_frame_pc (get_next_frame (frame)))))
- {
- CORE_ADDR *saved_regs;
- hppa_frame_init_saved_regs (get_next_frame (frame));
- saved_regs = deprecated_get_frame_saved_regs (get_next_frame (frame));
- if (read_memory_integer (saved_regs[FLAGS_REGNUM],
- TARGET_PTR_BIT / 8) & 0x2)
- {
- pc = read_memory_integer (saved_regs[31],
- TARGET_PTR_BIT / 8) & ~0x3;
-
- /* Syscalls are really two frames. The syscall stub itself
- with a return pointer in %rp and the kernel call with
- a return pointer in %r31. We return the %rp variant
- if %r31 is the same as frame->pc. */
- if (pc == get_frame_pc (frame))
- pc = read_memory_integer (saved_regs[RP_REGNUM],
- TARGET_PTR_BIT / 8) & ~0x3;
- }
- else
- pc = read_memory_integer (saved_regs[RP_REGNUM],
- TARGET_PTR_BIT / 8) & ~0x3;
- }
- else if (rp_offset == 0)
- {
- old_pc = pc;
- pc = read_register (RP_REGNUM) & ~0x3;
- }
- else
- {
- old_pc = pc;
- pc = read_memory_integer (get_frame_base (frame) + rp_offset,
- TARGET_PTR_BIT / 8) & ~0x3;
- }
- }
-
- /* If PC is inside a linker stub, then dig out the address the stub
- will return to.
-
- Don't do this for long branch stubs. Why? For some unknown reason
- _start is marked as a long branch stub in hpux10. */
- u = find_unwind_entry (pc);
- if (u && u->stub_unwind.stub_type != 0
- && u->stub_unwind.stub_type != LONG_BRANCH)
- {
- unsigned int insn;
-
- /* If this is a dynamic executable, and we're in a signal handler,
- then the call chain will eventually point us into the stub for
- _sigreturn. Unlike most cases, we'll be pointed to the branch
- to the real sigreturn rather than the code after the real branch!.
-
- Else, try to dig the address the stub will return to in the normal
- fashion. */
- insn = read_memory_integer (pc, 4);
- if ((insn & 0xfc00e000) == 0xe8000000)
- return (pc + extract_17 (insn) + 8) & ~0x3;
- else
- {
- if (old_pc == pc)
- spun_around_loop++;
-
- if (spun_around_loop > 1)
- {
- /* We're just about to go around the loop again with
- no more hope of success. Die. */
- error ("Unable to find return pc for this frame");
- }
- else
- goto restart;
- }
- }
-
- return pc;
-}
-\f
-/* We need to correct the PC and the FP for the outermost frame when we are
- in a system call. */
-
-void
-hppa_init_extra_frame_info (int fromleaf, struct frame_info *frame)
-{
- int flags;
- int framesize;
-
- if (get_next_frame (frame) && !fromleaf)
- return;
-
- /* If the next frame represents a frameless function invocation then
- we have to do some adjustments that are normally done by
- DEPRECATED_FRAME_CHAIN. (DEPRECATED_FRAME_CHAIN is not called in
- this case.) */
- if (fromleaf)
- {
- /* Find the framesize of *this* frame without peeking at the PC
- in the current frame structure (it isn't set yet). */
- framesize = find_proc_framesize (DEPRECATED_FRAME_SAVED_PC (get_next_frame (frame)));
-
- /* Now adjust our base frame accordingly. If we have a frame pointer
- use it, else subtract the size of this frame from the current
- frame. (we always want frame->frame to point at the lowest address
- in the frame). */
- if (framesize == -1)
- deprecated_update_frame_base_hack (frame, deprecated_read_fp ());
- else
- deprecated_update_frame_base_hack (frame, get_frame_base (frame) - framesize);
- return;
- }
-
- flags = read_register (FLAGS_REGNUM);
- if (flags & 2) /* In system call? */
- deprecated_update_frame_pc_hack (frame, read_register (31) & ~0x3);
-
- /* The outermost frame is always derived from PC-framesize
-
- One might think frameless innermost frames should have
- a frame->frame that is the same as the parent's frame->frame.
- That is wrong; frame->frame in that case should be the *high*
- address of the parent's frame. It's complicated as hell to
- explain, but the parent *always* creates some stack space for
- the child. So the child actually does have a frame of some
- sorts, and its base is the high address in its parent's frame. */
- framesize = find_proc_framesize (get_frame_pc (frame));
- if (framesize == -1)
- deprecated_update_frame_base_hack (frame, deprecated_read_fp ());
- else
- deprecated_update_frame_base_hack (frame, read_register (SP_REGNUM) - framesize);
-}
-\f
-/* Given a GDB frame, determine the address of the calling function's
- frame. This will be used to create a new GDB frame struct, and
- then DEPRECATED_INIT_EXTRA_FRAME_INFO and DEPRECATED_INIT_FRAME_PC
- will be called for the new frame.
-
- This may involve searching through prologues for several functions
- at boundaries where GCC calls HP C code, or where code which has
- a frame pointer calls code without a frame pointer. */
-
-CORE_ADDR
-hppa_frame_chain (struct frame_info *frame)
-{
- int my_framesize, caller_framesize;
- struct unwind_table_entry *u;
- CORE_ADDR frame_base;
- struct frame_info *tmp_frame;
-
- /* A frame in the current frame list, or zero. */
- struct frame_info *saved_regs_frame = 0;
- /* Where the registers were saved in saved_regs_frame. If
- saved_regs_frame is zero, this is garbage. */
- CORE_ADDR *saved_regs = NULL;
-
- CORE_ADDR caller_pc;
-
- struct minimal_symbol *min_frame_symbol;
- struct symbol *frame_symbol;
- char *frame_symbol_name;
-
- /* If this is a threaded application, and we see the
- routine "__pthread_exit", treat it as the stack root
- for this thread. */
- min_frame_symbol = lookup_minimal_symbol_by_pc (get_frame_pc (frame));
- frame_symbol = find_pc_function (get_frame_pc (frame));
-
- if ((min_frame_symbol != 0) /* && (frame_symbol == 0) */ )
- {
- /* The test above for "no user function name" would defend
- against the slim likelihood that a user might define a
- routine named "__pthread_exit" and then try to debug it.
-
- If it weren't commented out, and you tried to debug the
- pthread library itself, you'd get errors.
-
- So for today, we don't make that check. */
- frame_symbol_name = DEPRECATED_SYMBOL_NAME (min_frame_symbol);
- if (frame_symbol_name != 0)
- {
- if (0 == strncmp (frame_symbol_name,
- THREAD_INITIAL_FRAME_SYMBOL,
- THREAD_INITIAL_FRAME_SYM_LEN))
- {
- /* Pretend we've reached the bottom of the stack. */
- return (CORE_ADDR) 0;
- }
- }
- } /* End of hacky code for threads. */
-
- /* Handle HPUX, BSD, and OSF1 style interrupt frames first. These
- are easy; at *sp we have a full save state strucutre which we can
- pull the old stack pointer from. Also see frame_saved_pc for
- code to dig a saved PC out of the save state structure. */
- if (pc_in_interrupt_handler (get_frame_pc (frame)))
- frame_base = read_memory_integer (get_frame_base (frame) + SP_REGNUM * 4,
- TARGET_PTR_BIT / 8);
-#ifdef FRAME_BASE_BEFORE_SIGTRAMP
- else if ((get_frame_type (frame) == SIGTRAMP_FRAME))
- {
- FRAME_BASE_BEFORE_SIGTRAMP (frame, &frame_base);
- }
-#endif
- else
- frame_base = get_frame_base (frame);
-
- /* Get frame sizes for the current frame and the frame of the
- caller. */
- my_framesize = find_proc_framesize (get_frame_pc (frame));
- caller_pc = DEPRECATED_FRAME_SAVED_PC (frame);
-
- /* If we can't determine the caller's PC, then it's not likely we can
- really determine anything meaningful about its frame. We'll consider
- this to be stack bottom. */
- if (caller_pc == (CORE_ADDR) 0)
- return (CORE_ADDR) 0;
-
- caller_framesize = find_proc_framesize (DEPRECATED_FRAME_SAVED_PC (frame));
-
- /* If caller does not have a frame pointer, then its frame
- can be found at current_frame - caller_framesize. */
- if (caller_framesize != -1)
- {
- return frame_base - caller_framesize;
- }
- /* Both caller and callee have frame pointers and are GCC compiled
- (SAVE_SP bit in unwind descriptor is on for both functions.
- The previous frame pointer is found at the top of the current frame. */
- if (caller_framesize == -1 && my_framesize == -1)
- {
- return read_memory_integer (frame_base, TARGET_PTR_BIT / 8);
- }
- /* Caller has a frame pointer, but callee does not. This is a little
- more difficult as GCC and HP C lay out locals and callee register save
- areas very differently.
-
- The previous frame pointer could be in a register, or in one of
- several areas on the stack.
-
- Walk from the current frame to the innermost frame examining
- unwind descriptors to determine if %r3 ever gets saved into the
- stack. If so return whatever value got saved into the stack.
- If it was never saved in the stack, then the value in %r3 is still
- valid, so use it.
-
- We use information from unwind descriptors to determine if %r3
- is saved into the stack (Entry_GR field has this information). */
-
- for (tmp_frame = frame; tmp_frame; tmp_frame = get_next_frame (tmp_frame))
- {
- u = find_unwind_entry (get_frame_pc (tmp_frame));
-
- if (!u)
- {
- /* We could find this information by examining prologues. I don't
- think anyone has actually written any tools (not even "strip")
- which leave them out of an executable, so maybe this is a moot
- point. */
- /* ??rehrauer: Actually, it's quite possible to stepi your way into
- code that doesn't have unwind entries. For example, stepping into
- the dynamic linker will give you a PC that has none. Thus, I've
- disabled this warning. */
-#if 0
- warning ("Unable to find unwind for PC 0x%x -- Help!", get_frame_pc (tmp_frame));
-#endif
- return (CORE_ADDR) 0;
- }
-
- if (u->Save_SP
- || (get_frame_type (tmp_frame) == SIGTRAMP_FRAME)
- || pc_in_interrupt_handler (get_frame_pc (tmp_frame)))
- break;
-
- /* Entry_GR specifies the number of callee-saved general registers
- saved in the stack. It starts at %r3, so %r3 would be 1. */
- if (u->Entry_GR >= 1)
- {
- /* The unwind entry claims that r3 is saved here. However,
- in optimized code, GCC often doesn't actually save r3.
- We'll discover this if we look at the prologue. */
- hppa_frame_init_saved_regs (tmp_frame);
- saved_regs = deprecated_get_frame_saved_regs (tmp_frame);
- saved_regs_frame = tmp_frame;
-
- /* If we have an address for r3, that's good. */
- if (saved_regs[DEPRECATED_FP_REGNUM])
- break;
- }
- }
-
- if (tmp_frame)
- {
- /* We may have walked down the chain into a function with a frame
- pointer. */
- if (u->Save_SP
- && !(get_frame_type (tmp_frame) == SIGTRAMP_FRAME)
- && !pc_in_interrupt_handler (get_frame_pc (tmp_frame)))
- {
- return read_memory_integer (get_frame_base (tmp_frame), TARGET_PTR_BIT / 8);
- }
- /* %r3 was saved somewhere in the stack. Dig it out. */
- else
- {
- /* Sick.
-
- For optimization purposes many kernels don't have the
- callee saved registers into the save_state structure upon
- entry into the kernel for a syscall; the optimization
- is usually turned off if the process is being traced so
- that the debugger can get full register state for the
- process.
-
- This scheme works well except for two cases:
-
- * Attaching to a process when the process is in the
- kernel performing a system call (debugger can't get
- full register state for the inferior process since
- the process wasn't being traced when it entered the
- system call).
-
- * Register state is not complete if the system call
- causes the process to core dump.
-
-
- The following heinous code is an attempt to deal with
- the lack of register state in a core dump. It will
- fail miserably if the function which performs the
- system call has a variable sized stack frame. */
-
- if (tmp_frame != saved_regs_frame)
- {
- hppa_frame_init_saved_regs (tmp_frame);
- saved_regs = deprecated_get_frame_saved_regs (tmp_frame);
- }
-
- /* Abominable hack. */
- if (current_target.to_has_execution == 0
- && ((saved_regs[FLAGS_REGNUM]
- && (read_memory_integer (saved_regs[FLAGS_REGNUM],
- TARGET_PTR_BIT / 8)
- & 0x2))
- || (saved_regs[FLAGS_REGNUM] == 0
- && read_register (FLAGS_REGNUM) & 0x2)))
- {
- u = find_unwind_entry (DEPRECATED_FRAME_SAVED_PC (frame));
- if (!u)
- {
- return read_memory_integer (saved_regs[DEPRECATED_FP_REGNUM],
- TARGET_PTR_BIT / 8);
- }
- else
- {
- return frame_base - (u->Total_frame_size << 3);
- }
- }
-
- return read_memory_integer (saved_regs[DEPRECATED_FP_REGNUM],
- TARGET_PTR_BIT / 8);
- }
- }
- else
- {
- /* Get the innermost frame. */
- tmp_frame = frame;
- while (get_next_frame (tmp_frame) != NULL)
- tmp_frame = get_next_frame (tmp_frame);
-
- if (tmp_frame != saved_regs_frame)
- {
- hppa_frame_init_saved_regs (tmp_frame);
- saved_regs = deprecated_get_frame_saved_regs (tmp_frame);
- }
-
- /* Abominable hack. See above. */
- if (current_target.to_has_execution == 0
- && ((saved_regs[FLAGS_REGNUM]
- && (read_memory_integer (saved_regs[FLAGS_REGNUM],
- TARGET_PTR_BIT / 8)
- & 0x2))
- || (saved_regs[FLAGS_REGNUM] == 0
- && read_register (FLAGS_REGNUM) & 0x2)))
- {
- u = find_unwind_entry (DEPRECATED_FRAME_SAVED_PC (frame));
- if (!u)
- {
- return read_memory_integer (saved_regs[DEPRECATED_FP_REGNUM],
- TARGET_PTR_BIT / 8);
- }
- else
- {
- return frame_base - (u->Total_frame_size << 3);
- }
- }
-
- /* The value in %r3 was never saved into the stack (thus %r3 still
- holds the value of the previous frame pointer). */
- return deprecated_read_fp ();
- }
-}
-\f
-
-/* To see if a frame chain is valid, see if the caller looks like it
- was compiled with gcc. */
-
-int
-hppa_frame_chain_valid (CORE_ADDR chain, struct frame_info *thisframe)
-{
- struct minimal_symbol *msym_us;
- struct minimal_symbol *msym_start;
- struct unwind_table_entry *u, *next_u = NULL;
- struct frame_info *next;
-
- u = find_unwind_entry (get_frame_pc (thisframe));
-
- if (u == NULL)
- return 1;
-
- /* We can't just check that the same of msym_us is "_start", because
- someone idiotically decided that they were going to make a Ltext_end
- symbol with the same address. This Ltext_end symbol is totally
- indistinguishable (as nearly as I can tell) from the symbol for a function
- which is (legitimately, since it is in the user's namespace)
- named Ltext_end, so we can't just ignore it. */
- msym_us = lookup_minimal_symbol_by_pc (DEPRECATED_FRAME_SAVED_PC (thisframe));
- msym_start = lookup_minimal_symbol ("_start", NULL, NULL);
- if (msym_us
- && msym_start
- && SYMBOL_VALUE_ADDRESS (msym_us) == SYMBOL_VALUE_ADDRESS (msym_start))
- return 0;
-
- /* Grrrr. Some new idiot decided that they don't want _start for the
- PRO configurations; $START$ calls main directly.... Deal with it. */
- msym_start = lookup_minimal_symbol ("$START$", NULL, NULL);
- if (msym_us
- && msym_start
- && SYMBOL_VALUE_ADDRESS (msym_us) == SYMBOL_VALUE_ADDRESS (msym_start))
- return 0;
-
- next = get_next_frame (thisframe);
- if (next)
- next_u = find_unwind_entry (get_frame_pc (next));
-
- /* If this frame does not save SP, has no stack, isn't a stub,
- and doesn't "call" an interrupt routine or signal handler caller,
- then its not valid. */
- if (u->Save_SP || u->Total_frame_size || u->stub_unwind.stub_type != 0
- || (get_next_frame (thisframe) && (get_frame_type (get_next_frame (thisframe)) == SIGTRAMP_FRAME))
- || (next_u && next_u->HP_UX_interrupt_marker))
- return 1;
-
- if (pc_in_linker_stub (get_frame_pc (thisframe)))
- return 1;
-
- return 0;
-}
-
-/* These functions deal with saving and restoring register state
- around a function call in the inferior. They keep the stack
- double-word aligned; eventually, on an hp700, the stack will have
- to be aligned to a 64-byte boundary. */
-
-void
-hppa_push_dummy_frame (void)
-{
- CORE_ADDR sp, pc, pcspace;
- int regnum;
- CORE_ADDR int_buffer;
- double freg_buffer;
-
- pc = hppa_target_read_pc (inferior_ptid);
- int_buffer = read_register (FLAGS_REGNUM);
- if (int_buffer & 0x2)
- {
- const unsigned int sid = (pc >> 30) & 0x3;
- if (sid == 0)
- pcspace = read_register (SR4_REGNUM);
- else
- pcspace = read_register (SR4_REGNUM + 4 + sid);
- }
- else
- pcspace = read_register (PCSQ_HEAD_REGNUM);
-
- /* Space for "arguments"; the RP goes in here. */
- sp = read_register (SP_REGNUM) + 48;
- int_buffer = read_register (RP_REGNUM) | 0x3;
-
- /* The 32bit and 64bit ABIs save the return pointer into different
- stack slots. */
- if (DEPRECATED_REGISTER_SIZE == 8)
- write_memory (sp - 16, (char *) &int_buffer, DEPRECATED_REGISTER_SIZE);
- else
- write_memory (sp - 20, (char *) &int_buffer, DEPRECATED_REGISTER_SIZE);
-
- int_buffer = deprecated_read_fp ();
- write_memory (sp, (char *) &int_buffer, DEPRECATED_REGISTER_SIZE);
-
- write_register (DEPRECATED_FP_REGNUM, sp);
-
- sp += 2 * DEPRECATED_REGISTER_SIZE;
-
- for (regnum = 1; regnum < 32; regnum++)
- if (regnum != RP_REGNUM && regnum != DEPRECATED_FP_REGNUM)
- sp = push_word (sp, read_register (regnum));
-
- /* This is not necessary for the 64bit ABI. In fact it is dangerous. */
- if (DEPRECATED_REGISTER_SIZE != 8)
- sp += 4;
-
- for (regnum = FP0_REGNUM; regnum < NUM_REGS; regnum++)
- {
- deprecated_read_register_bytes (DEPRECATED_REGISTER_BYTE (regnum),
- (char *) &freg_buffer, 8);
- sp = push_bytes (sp, (char *) &freg_buffer, 8);
- }
- sp = push_word (sp, read_register (IPSW_REGNUM));
- sp = push_word (sp, read_register (SAR_REGNUM));
- sp = push_word (sp, pc);
- sp = push_word (sp, pcspace);
- sp = push_word (sp, pc + 4);
- sp = push_word (sp, pcspace);
- write_register (SP_REGNUM, sp);
-}
-
-static void
-find_dummy_frame_regs (struct frame_info *frame,
- CORE_ADDR frame_saved_regs[])
-{
- CORE_ADDR fp = get_frame_base (frame);
- int i;
-
- /* The 32bit and 64bit ABIs save RP into different locations. */
- if (DEPRECATED_REGISTER_SIZE == 8)
- frame_saved_regs[RP_REGNUM] = (fp - 16) & ~0x3;
- else
- frame_saved_regs[RP_REGNUM] = (fp - 20) & ~0x3;
-
- frame_saved_regs[DEPRECATED_FP_REGNUM] = fp;
-
- frame_saved_regs[1] = fp + (2 * DEPRECATED_REGISTER_SIZE);
-
- for (fp += 3 * DEPRECATED_REGISTER_SIZE, i = 3; i < 32; i++)
- {
- if (i != DEPRECATED_FP_REGNUM)
- {
- frame_saved_regs[i] = fp;
- fp += DEPRECATED_REGISTER_SIZE;
- }
- }
-
- /* This is not necessary or desirable for the 64bit ABI. */
- if (DEPRECATED_REGISTER_SIZE != 8)
- fp += 4;
-
- for (i = FP0_REGNUM; i < NUM_REGS; i++, fp += 8)
- frame_saved_regs[i] = fp;
-
- frame_saved_regs[IPSW_REGNUM] = fp;
- frame_saved_regs[SAR_REGNUM] = fp + DEPRECATED_REGISTER_SIZE;
- frame_saved_regs[PCOQ_HEAD_REGNUM] = fp + 2 * DEPRECATED_REGISTER_SIZE;
- frame_saved_regs[PCSQ_HEAD_REGNUM] = fp + 3 * DEPRECATED_REGISTER_SIZE;
- frame_saved_regs[PCOQ_TAIL_REGNUM] = fp + 4 * DEPRECATED_REGISTER_SIZE;
- frame_saved_regs[PCSQ_TAIL_REGNUM] = fp + 5 * DEPRECATED_REGISTER_SIZE;
-}
-
-void
-hppa_pop_frame (void)
-{
- struct frame_info *frame = get_current_frame ();
- CORE_ADDR fp, npc, target_pc;
- int regnum;
- CORE_ADDR *fsr;
- double freg_buffer;
-
- fp = get_frame_base (frame);
- hppa_frame_init_saved_regs (frame);
- fsr = deprecated_get_frame_saved_regs (frame);
-
-#ifndef NO_PC_SPACE_QUEUE_RESTORE
- if (fsr[IPSW_REGNUM]) /* Restoring a call dummy frame */
- restore_pc_queue (fsr);
-#endif
-
- for (regnum = 31; regnum > 0; regnum--)
- if (fsr[regnum])
- write_register (regnum, read_memory_integer (fsr[regnum],
- DEPRECATED_REGISTER_SIZE));
-
- for (regnum = NUM_REGS - 1; regnum >= FP0_REGNUM; regnum--)
- if (fsr[regnum])
- {
- read_memory (fsr[regnum], (char *) &freg_buffer, 8);
- deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (regnum),
- (char *) &freg_buffer, 8);
- }
-
- if (fsr[IPSW_REGNUM])
- write_register (IPSW_REGNUM,
- read_memory_integer (fsr[IPSW_REGNUM],
- DEPRECATED_REGISTER_SIZE));
-
- if (fsr[SAR_REGNUM])
- write_register (SAR_REGNUM,
- read_memory_integer (fsr[SAR_REGNUM],
- DEPRECATED_REGISTER_SIZE));
-
- /* If the PC was explicitly saved, then just restore it. */
- if (fsr[PCOQ_TAIL_REGNUM])
- {
- npc = read_memory_integer (fsr[PCOQ_TAIL_REGNUM],
- DEPRECATED_REGISTER_SIZE);
- write_register (PCOQ_TAIL_REGNUM, npc);
- }
- /* Else use the value in %rp to set the new PC. */
- else
- {
- npc = read_register (RP_REGNUM);
- write_pc (npc);
- }
-
- write_register (DEPRECATED_FP_REGNUM, read_memory_integer (fp, DEPRECATED_REGISTER_SIZE));
-
- if (fsr[IPSW_REGNUM]) /* call dummy */
- write_register (SP_REGNUM, fp - 48);
- else
- write_register (SP_REGNUM, fp);
-
- /* The PC we just restored may be inside a return trampoline. If so
- we want to restart the inferior and run it through the trampoline.
-
- Do this by setting a momentary breakpoint at the location the
- trampoline returns to.
-
- Don't skip through the trampoline if we're popping a dummy frame. */
- target_pc = SKIP_TRAMPOLINE_CODE (npc & ~0x3) & ~0x3;
- if (target_pc && !fsr[IPSW_REGNUM])
- {
- struct symtab_and_line sal;
- struct breakpoint *breakpoint;
- struct cleanup *old_chain;
-
- /* Set up our breakpoint. Set it to be silent as the MI code
- for "return_command" will print the frame we returned to. */
- sal = find_pc_line (target_pc, 0);
- sal.pc = target_pc;
- breakpoint = set_momentary_breakpoint (sal, null_frame_id, bp_finish);
- breakpoint->silent = 1;
-
- /* So we can clean things up. */
- old_chain = make_cleanup_delete_breakpoint (breakpoint);
-
- /* Start up the inferior. */
- clear_proceed_status ();
- proceed_to_finish = 1;
- proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
-
- /* Perform our cleanups. */
- do_cleanups (old_chain);
- }
- flush_cached_frames ();
-}
-
-/* After returning to a dummy on the stack, restore the instruction
- queue space registers. */
-
-static int
-restore_pc_queue (CORE_ADDR *fsr)
-{
- CORE_ADDR pc = read_pc ();
- CORE_ADDR new_pc = read_memory_integer (fsr[PCOQ_HEAD_REGNUM],
- TARGET_PTR_BIT / 8);
- struct target_waitstatus w;
- int insn_count;
-
- /* Advance past break instruction in the call dummy. */
- write_register (PCOQ_HEAD_REGNUM, pc + 4);
- write_register (PCOQ_TAIL_REGNUM, pc + 8);
-
- /* HPUX doesn't let us set the space registers or the space
- registers of the PC queue through ptrace. Boo, hiss.
- Conveniently, the call dummy has this sequence of instructions
- after the break:
- mtsp r21, sr0
- ble,n 0(sr0, r22)
-
- So, load up the registers and single step until we are in the
- right place. */
-
- write_register (21, read_memory_integer (fsr[PCSQ_HEAD_REGNUM],
- DEPRECATED_REGISTER_SIZE));
- write_register (22, new_pc);
-
- for (insn_count = 0; insn_count < 3; insn_count++)
- {
- /* FIXME: What if the inferior gets a signal right now? Want to
- merge this into wait_for_inferior (as a special kind of
- watchpoint? By setting a breakpoint at the end? Is there
- any other choice? Is there *any* way to do this stuff with
- ptrace() or some equivalent?). */
- resume (1, 0);
- target_wait (inferior_ptid, &w);
-
- if (w.kind == TARGET_WAITKIND_SIGNALLED)
- {
- stop_signal = w.value.sig;
- terminal_ours_for_output ();
- printf_unfiltered ("\nProgram terminated with signal %s, %s.\n",
- target_signal_to_name (stop_signal),
- target_signal_to_string (stop_signal));
- gdb_flush (gdb_stdout);
- return 0;
- }
- }
- target_terminal_ours ();
- target_fetch_registers (-1);
- return 1;
-}
-
-
-#ifdef PA20W_CALLING_CONVENTIONS
-
-/* This function pushes a stack frame with arguments as part of the
- inferior function calling mechanism.
-
- This is the version for the PA64, in which later arguments appear
- at higher addresses. (The stack always grows towards higher
- addresses.)
-
- We simply allocate the appropriate amount of stack space and put
- arguments into their proper slots. The call dummy code will copy
- arguments into registers as needed by the ABI.
-
- This ABI also requires that the caller provide an argument pointer
- to the callee, so we do that too. */
-
-CORE_ADDR
-hppa_push_arguments (int nargs, struct value **args, CORE_ADDR sp,
- int struct_return, CORE_ADDR struct_addr)
-{
- /* array of arguments' offsets */
- int *offset = (int *) alloca (nargs * sizeof (int));
-
- /* array of arguments' lengths: real lengths in bytes, not aligned to
- word size */
- int *lengths = (int *) alloca (nargs * sizeof (int));
-
- /* The value of SP as it was passed into this function after
- aligning. */
- CORE_ADDR orig_sp = DEPRECATED_STACK_ALIGN (sp);
-
- /* The number of stack bytes occupied by the current argument. */
- int bytes_reserved;
-
- /* The total number of bytes reserved for the arguments. */
- int cum_bytes_reserved = 0;
-
- /* Similarly, but aligned. */
- int cum_bytes_aligned = 0;
- int i;
-
- /* Iterate over each argument provided by the user. */
- for (i = 0; i < nargs; i++)
- {
- struct type *arg_type = VALUE_TYPE (args[i]);
-
- /* Integral scalar values smaller than a register are padded on
- the left. We do this by promoting them to full-width,
- although the ABI says to pad them with garbage. */
- if (is_integral_type (arg_type)
- && TYPE_LENGTH (arg_type) < DEPRECATED_REGISTER_SIZE)
- {
- args[i] = value_cast ((TYPE_UNSIGNED (arg_type)
- ? builtin_type_unsigned_long
- : builtin_type_long),
- args[i]);
- arg_type = VALUE_TYPE (args[i]);
- }
-
- lengths[i] = TYPE_LENGTH (arg_type);
-
- /* Align the size of the argument to the word size for this
- target. */
- bytes_reserved = (lengths[i] + DEPRECATED_REGISTER_SIZE - 1) & -DEPRECATED_REGISTER_SIZE;
-
- offset[i] = cum_bytes_reserved;
-
- /* Aggregates larger than eight bytes (the only types larger
- than eight bytes we have) are aligned on a 16-byte boundary,
- possibly padded on the right with garbage. This may leave an
- empty word on the stack, and thus an unused register, as per
- the ABI. */
- if (bytes_reserved > 8)
- {
- /* Round up the offset to a multiple of two slots. */
- int new_offset = ((offset[i] + 2*DEPRECATED_REGISTER_SIZE-1)
- & -(2*DEPRECATED_REGISTER_SIZE));
-
- /* Note the space we've wasted, if any. */
- bytes_reserved += new_offset - offset[i];
- offset[i] = new_offset;
- }
-
- cum_bytes_reserved += bytes_reserved;
- }
-
- /* CUM_BYTES_RESERVED already accounts for all the arguments
- passed by the user. However, the ABIs mandate minimum stack space
- allocations for outgoing arguments.
-
- The ABIs also mandate minimum stack alignments which we must
- preserve. */
- cum_bytes_aligned = DEPRECATED_STACK_ALIGN (cum_bytes_reserved);
- sp += max (cum_bytes_aligned, REG_PARM_STACK_SPACE);
-
- /* Now write each of the args at the proper offset down the stack. */
- for (i = 0; i < nargs; i++)
- write_memory (orig_sp + offset[i], VALUE_CONTENTS (args[i]), lengths[i]);
-
- /* If a structure has to be returned, set up register 28 to hold its
- address */
- if (struct_return)
- write_register (28, struct_addr);
-
- /* For the PA64 we must pass a pointer to the outgoing argument list.
- The ABI mandates that the pointer should point to the first byte of
- storage beyond the register flushback area.
-
- However, the call dummy expects the outgoing argument pointer to
- be passed in register %r4. */
- write_register (4, orig_sp + REG_PARM_STACK_SPACE);
-
- /* ?!? This needs further work. We need to set up the global data
- pointer for this procedure. This assumes the same global pointer
- for every procedure. The call dummy expects the dp value to
- be passed in register %r6. */
- write_register (6, read_register (27));
-
- /* The stack will have 64 bytes of additional space for a frame marker. */
- return sp + 64;
-}
-
-#else
-
-/* This function pushes a stack frame with arguments as part of the
- inferior function calling mechanism.
-
- This is the version of the function for the 32-bit PA machines, in
- which later arguments appear at lower addresses. (The stack always
- grows towards higher addresses.)
-
- We simply allocate the appropriate amount of stack space and put
- arguments into their proper slots. The call dummy code will copy
- arguments into registers as needed by the ABI. */
-
-CORE_ADDR
-hppa_push_arguments (int nargs, struct value **args, CORE_ADDR sp,
- int struct_return, CORE_ADDR struct_addr)
-{
- /* array of arguments' offsets */
- int *offset = (int *) alloca (nargs * sizeof (int));
-
- /* array of arguments' lengths: real lengths in bytes, not aligned to
- word size */
- int *lengths = (int *) alloca (nargs * sizeof (int));
-
- /* The number of stack bytes occupied by the current argument. */
- int bytes_reserved;
-
- /* The total number of bytes reserved for the arguments. */
- int cum_bytes_reserved = 0;
-
- /* Similarly, but aligned. */
- int cum_bytes_aligned = 0;
- int i;
-
- /* Iterate over each argument provided by the user. */
- for (i = 0; i < nargs; i++)
- {
- lengths[i] = TYPE_LENGTH (VALUE_TYPE (args[i]));
-
- /* Align the size of the argument to the word size for this
- target. */
- bytes_reserved = (lengths[i] + DEPRECATED_REGISTER_SIZE - 1) & -DEPRECATED_REGISTER_SIZE;
-
- offset[i] = (cum_bytes_reserved
- + (lengths[i] > 4 ? bytes_reserved : lengths[i]));
-
- /* If the argument is a double word argument, then it needs to be
- double word aligned. */
- if ((bytes_reserved == 2 * DEPRECATED_REGISTER_SIZE)
- && (offset[i] % 2 * DEPRECATED_REGISTER_SIZE))
- {
- int new_offset = 0;
- /* BYTES_RESERVED is already aligned to the word, so we put
- the argument at one word more down the stack.
-
- This will leave one empty word on the stack, and one unused
- register as mandated by the ABI. */
- new_offset = ((offset[i] + 2 * DEPRECATED_REGISTER_SIZE - 1)
- & -(2 * DEPRECATED_REGISTER_SIZE));
-
- if ((new_offset - offset[i]) >= 2 * DEPRECATED_REGISTER_SIZE)
- {
- bytes_reserved += DEPRECATED_REGISTER_SIZE;
- offset[i] += DEPRECATED_REGISTER_SIZE;
- }
- }
-
- cum_bytes_reserved += bytes_reserved;
-
- }
-
- /* CUM_BYTES_RESERVED already accounts for all the arguments passed
- by the user. However, the ABI mandates minimum stack space
- allocations for outgoing arguments.
-
- The ABI also mandates minimum stack alignments which we must
- preserve. */
- cum_bytes_aligned = DEPRECATED_STACK_ALIGN (cum_bytes_reserved);
- sp += max (cum_bytes_aligned, REG_PARM_STACK_SPACE);
-
- /* Now write each of the args at the proper offset down the stack.
- ?!? We need to promote values to a full register instead of skipping
- words in the stack. */
- for (i = 0; i < nargs; i++)
- write_memory (sp - offset[i], VALUE_CONTENTS (args[i]), lengths[i]);
-
- /* If a structure has to be returned, set up register 28 to hold its
- address */
- if (struct_return)
- write_register (28, struct_addr);
-
- /* The stack will have 32 bytes of additional space for a frame marker. */
- return sp + 32;
-}
-
-#endif
-
-/* elz: Used to lookup a symbol in the shared libraries.
- This function calls shl_findsym, indirectly through a
- call to __d_shl_get. __d_shl_get is in end.c, which is always
- linked in by the hp compilers/linkers.
- The call to shl_findsym cannot be made directly because it needs
- to be active in target address space.
- inputs: - minimal symbol pointer for the function we want to look up
- - address in target space of the descriptor for the library
- where we want to look the symbol up.
- This address is retrieved using the
- som_solib_get_solib_by_pc function (somsolib.c).
- output: - real address in the library of the function.
- note: the handle can be null, in which case shl_findsym will look for
- the symbol in all the loaded shared libraries.
- files to look at if you need reference on this stuff:
- dld.c, dld_shl_findsym.c
- end.c
- man entry for shl_findsym */
-
-CORE_ADDR
-find_stub_with_shl_get (struct minimal_symbol *function, CORE_ADDR handle)
-{
- struct symbol *get_sym, *symbol2;
- struct minimal_symbol *buff_minsym, *msymbol;
- struct type *ftype;
- struct value **args;
- struct value *funcval;
- struct value *val;
-
- int x, namelen, err_value, tmp = -1;
- CORE_ADDR endo_buff_addr, value_return_addr, errno_return_addr;
- CORE_ADDR stub_addr;
-
-
- args = alloca (sizeof (struct value *) * 8); /* 6 for the arguments and one null one??? */
- funcval = find_function_in_inferior ("__d_shl_get");
- get_sym = lookup_symbol ("__d_shl_get", NULL, VAR_DOMAIN, NULL, NULL);
- buff_minsym = lookup_minimal_symbol ("__buffer", NULL, NULL);
- msymbol = lookup_minimal_symbol ("__shldp", NULL, NULL);
- symbol2 = lookup_symbol ("__shldp", NULL, VAR_DOMAIN, NULL, NULL);
- endo_buff_addr = SYMBOL_VALUE_ADDRESS (buff_minsym);
- namelen = strlen (DEPRECATED_SYMBOL_NAME (function));
- value_return_addr = endo_buff_addr + namelen;
- ftype = check_typedef (SYMBOL_TYPE (get_sym));
-
- /* do alignment */
- if ((x = value_return_addr % 64) != 0)
- value_return_addr = value_return_addr + 64 - x;
-
- errno_return_addr = value_return_addr + 64;
-
-
- /* set up stuff needed by __d_shl_get in buffer in end.o */
-
- target_write_memory (endo_buff_addr, DEPRECATED_SYMBOL_NAME (function), namelen);
-
- target_write_memory (value_return_addr, (char *) &tmp, 4);
-
- target_write_memory (errno_return_addr, (char *) &tmp, 4);
-
- target_write_memory (SYMBOL_VALUE_ADDRESS (msymbol),
- (char *) &handle, 4);
-
- /* now prepare the arguments for the call */
-
- args[0] = value_from_longest (TYPE_FIELD_TYPE (ftype, 0), 12);
- args[1] = value_from_pointer (TYPE_FIELD_TYPE (ftype, 1), SYMBOL_VALUE_ADDRESS (msymbol));
- args[2] = value_from_pointer (TYPE_FIELD_TYPE (ftype, 2), endo_buff_addr);
- args[3] = value_from_longest (TYPE_FIELD_TYPE (ftype, 3), TYPE_PROCEDURE);
- args[4] = value_from_pointer (TYPE_FIELD_TYPE (ftype, 4), value_return_addr);
- args[5] = value_from_pointer (TYPE_FIELD_TYPE (ftype, 5), errno_return_addr);
-
- /* now call the function */
-
- val = call_function_by_hand (funcval, 6, args);
-
- /* now get the results */
-
- target_read_memory (errno_return_addr, (char *) &err_value, sizeof (err_value));
-
- target_read_memory (value_return_addr, (char *) &stub_addr, sizeof (stub_addr));
- if (stub_addr <= 0)
- error ("call to __d_shl_get failed, error code is %d", err_value);
-
- return (stub_addr);
-}
-
-/* Cover routine for find_stub_with_shl_get to pass to catch_errors */
-static int
-cover_find_stub_with_shl_get (void *args_untyped)
-{
- args_for_find_stub *args = args_untyped;
- args->return_val = find_stub_with_shl_get (args->msym, args->solib_handle);
- return 0;
-}
-
-/* Insert the specified number of args and function address
- into a call sequence of the above form stored at DUMMYNAME.
-
- On the hppa we need to call the stack dummy through $$dyncall.
- Therefore our version of DEPRECATED_FIX_CALL_DUMMY takes an extra
- argument, real_pc, which is the location where gdb should start up
- the inferior to do the function call.
-
- This has to work across several versions of hpux, bsd, osf1. It has to
- work regardless of what compiler was used to build the inferior program.
- It should work regardless of whether or not end.o is available. It has
- to work even if gdb can not call into the dynamic loader in the inferior
- to query it for symbol names and addresses.
-
- Yes, all those cases should work. Luckily code exists to handle most
- of them. The complexity is in selecting exactly what scheme should
- be used to perform the inferior call.
-
- At the current time this routine is known not to handle cases where
- the program was linked with HP's compiler without including end.o.
-
- Please contact Jeff Law (law@cygnus.com) before changing this code. */
-
-CORE_ADDR
-hppa_fix_call_dummy (char *dummy, CORE_ADDR pc, CORE_ADDR fun, int nargs,
- struct value **args, struct type *type, int gcc_p)
-{
- CORE_ADDR dyncall_addr;
- struct minimal_symbol *msymbol;
- struct minimal_symbol *trampoline;
- int flags = read_register (FLAGS_REGNUM);
- struct unwind_table_entry *u = NULL;
- CORE_ADDR new_stub = 0;
- CORE_ADDR solib_handle = 0;
-
- /* Nonzero if we will use GCC's PLT call routine. This routine must be
- passed an import stub, not a PLABEL. It is also necessary to set %r19
- (the PIC register) before performing the call.
-
- If zero, then we are using __d_plt_call (HP's PLT call routine) or we
- are calling the target directly. When using __d_plt_call we want to
- use a PLABEL instead of an import stub. */
- int using_gcc_plt_call = 1;
-
-#ifdef GDB_TARGET_IS_HPPA_20W
- /* We currently use completely different code for the PA2.0W inferior
- function call sequences. This needs to be cleaned up. */
- {
- CORE_ADDR pcsqh, pcsqt, pcoqh, pcoqt, sr5;
- struct target_waitstatus w;
- int inst1, inst2;
- char buf[4];
- int status;
- struct objfile *objfile;
-
- /* We can not modify the PC space queues directly, so we start
- up the inferior and execute a couple instructions to set the
- space queues so that they point to the call dummy in the stack. */
- pcsqh = read_register (PCSQ_HEAD_REGNUM);
- sr5 = read_register (SR5_REGNUM);
- if (1)
- {
- pcoqh = read_register (PCOQ_HEAD_REGNUM);
- pcoqt = read_register (PCOQ_TAIL_REGNUM);
- if (target_read_memory (pcoqh, buf, 4) != 0)
- error ("Couldn't modify space queue\n");
- inst1 = extract_unsigned_integer (buf, 4);
-
- if (target_read_memory (pcoqt, buf, 4) != 0)
- error ("Couldn't modify space queue\n");
- inst2 = extract_unsigned_integer (buf, 4);
-
- /* BVE (r1) */
- *((int *) buf) = 0xe820d000;
- if (target_write_memory (pcoqh, buf, 4) != 0)
- error ("Couldn't modify space queue\n");
-
- /* NOP */
- *((int *) buf) = 0x08000240;
- if (target_write_memory (pcoqt, buf, 4) != 0)
- {
- *((int *) buf) = inst1;
- target_write_memory (pcoqh, buf, 4);
- error ("Couldn't modify space queue\n");
- }
-
- write_register (1, pc);
-
- /* Single step twice, the BVE instruction will set the space queue
- such that it points to the PC value written immediately above
- (ie the call dummy). */
- resume (1, 0);
- target_wait (inferior_ptid, &w);
- resume (1, 0);
- target_wait (inferior_ptid, &w);
-
- /* Restore the two instructions at the old PC locations. */
- *((int *) buf) = inst1;
- target_write_memory (pcoqh, buf, 4);
- *((int *) buf) = inst2;
- target_write_memory (pcoqt, buf, 4);
- }
-
- /* The call dummy wants the ultimate destination address initially
- in register %r5. */
- write_register (5, fun);
-
- /* We need to see if this objfile has a different DP value than our
- own (it could be a shared library for example). */
- ALL_OBJFILES (objfile)
- {
- struct obj_section *s;
- obj_private_data_t *obj_private;
-
- /* See if FUN is in any section within this shared library. */
- for (s = objfile->sections; s < objfile->sections_end; s++)
- if (s->addr <= fun && fun < s->endaddr)
- break;
-
- if (s >= objfile->sections_end)
- continue;
-
- obj_private = (obj_private_data_t *) objfile->obj_private;
-
- /* The DP value may be different for each objfile. But within an
- objfile each function uses the same dp value. Thus we do not need
- to grope around the opd section looking for dp values.
-
- ?!? This is not strictly correct since we may be in a shared library
- and want to call back into the main program. To make that case
- work correctly we need to set obj_private->dp for the main program's
- objfile, then remove this conditional. */
- if (obj_private->dp)
- write_register (27, obj_private->dp);
- break;
- }
- return pc;
- }
-#endif
-
-#ifndef GDB_TARGET_IS_HPPA_20W
- /* Prefer __gcc_plt_call over the HP supplied routine because
- __gcc_plt_call works for any number of arguments. */
- trampoline = NULL;
- if (lookup_minimal_symbol ("__gcc_plt_call", NULL, NULL) == NULL)
- using_gcc_plt_call = 0;
-
- msymbol = lookup_minimal_symbol ("$$dyncall", NULL, NULL);
- if (msymbol == NULL)
- error ("Can't find an address for $$dyncall trampoline");
-
- dyncall_addr = SYMBOL_VALUE_ADDRESS (msymbol);
-
- /* FUN could be a procedure label, in which case we have to get
- its real address and the value of its GOT/DP if we plan to
- call the routine via gcc_plt_call. */
- if ((fun & 0x2) && using_gcc_plt_call)
- {
- /* Get the GOT/DP value for the target function. It's
- at *(fun+4). Note the call dummy is *NOT* allowed to
- trash %r19 before calling the target function. */
- write_register (19, read_memory_integer ((fun & ~0x3) + 4,
- DEPRECATED_REGISTER_SIZE));
-
- /* Now get the real address for the function we are calling, it's
- at *fun. */
- fun = (CORE_ADDR) read_memory_integer (fun & ~0x3,
- TARGET_PTR_BIT / 8);
- }
- else
- {
-
-#ifndef GDB_TARGET_IS_PA_ELF
- /* FUN could be an export stub, the real address of a function, or
- a PLABEL. When using gcc's PLT call routine we must call an import
- stub rather than the export stub or real function for lazy binding
- to work correctly
-
- If we are using the gcc PLT call routine, then we need to
- get the import stub for the target function. */
- if (using_gcc_plt_call && som_solib_get_got_by_pc (fun))
- {
- struct objfile *objfile;
- struct minimal_symbol *funsymbol, *stub_symbol;
- CORE_ADDR newfun = 0;
-
- funsymbol = lookup_minimal_symbol_by_pc (fun);
- if (!funsymbol)
- error ("Unable to find minimal symbol for target function.\n");
-
- /* Search all the object files for an import symbol with the
- right name. */
- ALL_OBJFILES (objfile)
- {
- stub_symbol
- = lookup_minimal_symbol_solib_trampoline
- (DEPRECATED_SYMBOL_NAME (funsymbol), objfile);
-
- if (!stub_symbol)
- stub_symbol = lookup_minimal_symbol (DEPRECATED_SYMBOL_NAME (funsymbol),
- NULL, objfile);
-
- /* Found a symbol with the right name. */
- if (stub_symbol)
- {
- struct unwind_table_entry *u;
- /* It must be a shared library trampoline. */
- if (MSYMBOL_TYPE (stub_symbol) != mst_solib_trampoline)
- continue;
-
- /* It must also be an import stub. */
- u = find_unwind_entry (SYMBOL_VALUE (stub_symbol));
- if (u == NULL
- || (u->stub_unwind.stub_type != IMPORT
-#ifdef GDB_NATIVE_HPUX_11
- /* Sigh. The hpux 10.20 dynamic linker will blow
- chunks if we perform a call to an unbound function
- via the IMPORT_SHLIB stub. The hpux 11.00 dynamic
- linker will blow chunks if we do not call the
- unbound function via the IMPORT_SHLIB stub.
-
- We currently have no way to select bevahior on just
- the target. However, we only support HPUX/SOM in
- native mode. So we conditinalize on a native
- #ifdef. Ugly. Ugly. Ugly */
- && u->stub_unwind.stub_type != IMPORT_SHLIB
-#endif
- ))
- continue;
-
- /* OK. Looks like the correct import stub. */
- newfun = SYMBOL_VALUE (stub_symbol);
- fun = newfun;
-
- /* If we found an IMPORT stub, then we want to stop
- searching now. If we found an IMPORT_SHLIB, we want
- to continue the search in the hopes that we will find
- an IMPORT stub. */
- if (u->stub_unwind.stub_type == IMPORT)
- break;
- }
- }
-
- /* Ouch. We did not find an import stub. Make an attempt to
- do the right thing instead of just croaking. Most of the
- time this will actually work. */
- if (newfun == 0)
- write_register (19, som_solib_get_got_by_pc (fun));
-
- u = find_unwind_entry (fun);
- if (u
- && (u->stub_unwind.stub_type == IMPORT
- || u->stub_unwind.stub_type == IMPORT_SHLIB))
- trampoline = lookup_minimal_symbol ("__gcc_plt_call", NULL, NULL);
-
- /* If we found the import stub in the shared library, then we have
- to set %r19 before we call the stub. */
- if (u && u->stub_unwind.stub_type == IMPORT_SHLIB)
- write_register (19, som_solib_get_got_by_pc (fun));
- }
-#endif
- }
-
- /* If we are calling into another load module then have sr4export call the
- magic __d_plt_call routine which is linked in from end.o.
-
- You can't use _sr4export to make the call as the value in sp-24 will get
- fried and you end up returning to the wrong location. You can't call the
- target as the code to bind the PLT entry to a function can't return to a
- stack address.
-
- Also, query the dynamic linker in the inferior to provide a suitable
- PLABEL for the target function. */
- if (!using_gcc_plt_call)
- {
- CORE_ADDR new_fun;
-
- /* Get a handle for the shared library containing FUN. Given the
- handle we can query the shared library for a PLABEL. */
- solib_handle = som_solib_get_solib_by_pc (fun);
-
- if (solib_handle)
- {
- struct minimal_symbol *fmsymbol = lookup_minimal_symbol_by_pc (fun);
-
- trampoline = lookup_minimal_symbol ("__d_plt_call", NULL, NULL);
-
- if (trampoline == NULL)
- {
- error ("Can't find an address for __d_plt_call or __gcc_plt_call trampoline\nSuggest linking executable with -g or compiling with gcc.");
- }
-
- /* This is where sr4export will jump to. */
- new_fun = SYMBOL_VALUE_ADDRESS (trampoline);
-
- /* If the function is in a shared library, then call __d_shl_get to
- get a PLABEL for the target function. */
- new_stub = find_stub_with_shl_get (fmsymbol, solib_handle);
-
- if (new_stub == 0)
- error ("Can't find an import stub for %s", DEPRECATED_SYMBOL_NAME (fmsymbol));
-
- /* We have to store the address of the stub in __shlib_funcptr. */
- msymbol = lookup_minimal_symbol ("__shlib_funcptr", NULL,
- (struct objfile *) NULL);
-
- if (msymbol == NULL)
- error ("Can't find an address for __shlib_funcptr");
- target_write_memory (SYMBOL_VALUE_ADDRESS (msymbol),
- (char *) &new_stub, 4);
-
- /* We want sr4export to call __d_plt_call, so we claim it is
- the final target. Clear trampoline. */
- fun = new_fun;
- trampoline = NULL;
- }
- }
-
- /* Store upper 21 bits of function address into ldil. fun will either be
- the final target (most cases) or __d_plt_call when calling into a shared
- library and __gcc_plt_call is not available. */
- store_unsigned_integer
- (&dummy[FUNC_LDIL_OFFSET],
- INSTRUCTION_SIZE,
- deposit_21 (fun >> 11,
- extract_unsigned_integer (&dummy[FUNC_LDIL_OFFSET],
- INSTRUCTION_SIZE)));
-
- /* Store lower 11 bits of function address into ldo */
- store_unsigned_integer
- (&dummy[FUNC_LDO_OFFSET],
- INSTRUCTION_SIZE,
- deposit_14 (fun & MASK_11,
- extract_unsigned_integer (&dummy[FUNC_LDO_OFFSET],
- INSTRUCTION_SIZE)));
-#ifdef SR4EXPORT_LDIL_OFFSET
-
- {
- CORE_ADDR trampoline_addr;
-
- /* We may still need sr4export's address too. */
-
- if (trampoline == NULL)
- {
- msymbol = lookup_minimal_symbol ("_sr4export", NULL, NULL);
- if (msymbol == NULL)
- error ("Can't find an address for _sr4export trampoline");
-
- trampoline_addr = SYMBOL_VALUE_ADDRESS (msymbol);
- }
- else
- trampoline_addr = SYMBOL_VALUE_ADDRESS (trampoline);
-
-
- /* Store upper 21 bits of trampoline's address into ldil */
- store_unsigned_integer
- (&dummy[SR4EXPORT_LDIL_OFFSET],
- INSTRUCTION_SIZE,
- deposit_21 (trampoline_addr >> 11,
- extract_unsigned_integer (&dummy[SR4EXPORT_LDIL_OFFSET],
- INSTRUCTION_SIZE)));
-
- /* Store lower 11 bits of trampoline's address into ldo */
- store_unsigned_integer
- (&dummy[SR4EXPORT_LDO_OFFSET],
- INSTRUCTION_SIZE,
- deposit_14 (trampoline_addr & MASK_11,
- extract_unsigned_integer (&dummy[SR4EXPORT_LDO_OFFSET],
- INSTRUCTION_SIZE)));
- }
-#endif
-
- write_register (22, pc);
-
- /* If we are in a syscall, then we should call the stack dummy
- directly. $$dyncall is not needed as the kernel sets up the
- space id registers properly based on the value in %r31. In
- fact calling $$dyncall will not work because the value in %r22
- will be clobbered on the syscall exit path.
-
- Similarly if the current PC is in a shared library. Note however,
- this scheme won't work if the shared library isn't mapped into
- the same space as the stack. */
- if (flags & 2)
- return pc;
-#ifndef GDB_TARGET_IS_PA_ELF
- else if (som_solib_get_got_by_pc (hppa_target_read_pc (inferior_ptid)))
- return pc;
-#endif
- else
- return dyncall_addr;
-#endif
-}
-
-/* If the pid is in a syscall, then the FP register is not readable.
- We'll return zero in that case, rather than attempting to read it
- and cause a warning. */
-
-CORE_ADDR
-hppa_read_fp (int pid)
-{
- int flags = read_register (FLAGS_REGNUM);
-
- if (flags & 2)
- {
- return (CORE_ADDR) 0;
- }
-
- /* This is the only site that may directly read_register () the FP
- register. All others must use deprecated_read_fp (). */
- return read_register (DEPRECATED_FP_REGNUM);
-}
-
-CORE_ADDR
-hppa_target_read_fp (void)
-{
- return hppa_read_fp (PIDGET (inferior_ptid));
-}
-
-/* Get the PC from %r31 if currently in a syscall. Also mask out privilege
- bits. */
-
-CORE_ADDR
-hppa_target_read_pc (ptid_t ptid)
-{
- int flags = read_register_pid (FLAGS_REGNUM, ptid);
-
- /* The following test does not belong here. It is OS-specific, and belongs
- in native code. */
- /* Test SS_INSYSCALL */
- if (flags & 2)
- return read_register_pid (31, ptid) & ~0x3;
-
- return read_register_pid (PC_REGNUM, ptid) & ~0x3;
-}
-
-/* Write out the PC. If currently in a syscall, then also write the new
- PC value into %r31. */
-
-void
-hppa_target_write_pc (CORE_ADDR v, ptid_t ptid)
-{
- int flags = read_register_pid (FLAGS_REGNUM, ptid);
-
- /* The following test does not belong here. It is OS-specific, and belongs
- in native code. */
- /* If in a syscall, then set %r31. Also make sure to get the
- privilege bits set correctly. */
- /* Test SS_INSYSCALL */
- if (flags & 2)
- write_register_pid (31, v | 0x3, ptid);
-
- write_register_pid (PC_REGNUM, v, ptid);
- write_register_pid (PCOQ_TAIL_REGNUM, v + 4, ptid);
-}
-
-/* return the alignment of a type in bytes. Structures have the maximum
- alignment required by their fields. */
-
-static int
-hppa_alignof (struct type *type)
-{
- int max_align, align, i;
- CHECK_TYPEDEF (type);
- switch (TYPE_CODE (type))
- {
- case TYPE_CODE_PTR:
- case TYPE_CODE_INT:
- case TYPE_CODE_FLT:
- return TYPE_LENGTH (type);
- case TYPE_CODE_ARRAY:
- return hppa_alignof (TYPE_FIELD_TYPE (type, 0));
- case TYPE_CODE_STRUCT:
- case TYPE_CODE_UNION:
- max_align = 1;
- for (i = 0; i < TYPE_NFIELDS (type); i++)
- {
- /* Bit fields have no real alignment. */
- /* if (!TYPE_FIELD_BITPOS (type, i)) */
- if (!TYPE_FIELD_BITSIZE (type, i)) /* elz: this should be bitsize */
- {
- align = hppa_alignof (TYPE_FIELD_TYPE (type, i));
- max_align = max (max_align, align);
- }
- }
- return max_align;
- default:
- return 4;
- }
-}
-
-/* Print the register regnum, or all registers if regnum is -1 */
-
-void
-pa_do_registers_info (int regnum, int fpregs)
-{
- char *raw_regs = alloca (DEPRECATED_REGISTER_BYTES);
- int i;
-
- /* Make a copy of gdb's save area (may cause actual
- reads from the target). */
- for (i = 0; i < NUM_REGS; i++)
- frame_register_read (deprecated_selected_frame, i,
- raw_regs + DEPRECATED_REGISTER_BYTE (i));
-
- if (regnum == -1)
- pa_print_registers (raw_regs, regnum, fpregs);
- else if (regnum < FP4_REGNUM)
- {
- long reg_val[2];
-
- /* Why is the value not passed through "extract_signed_integer"
- as in "pa_print_registers" below? */
- pa_register_look_aside (raw_regs, regnum, ®_val[0]);
-
- if (!is_pa_2)
- {
- printf_unfiltered ("%s %lx\n", REGISTER_NAME (regnum), reg_val[1]);
- }
- else
- {
- /* Fancy % formats to prevent leading zeros. */
- if (reg_val[0] == 0)
- printf_unfiltered ("%s %lx\n", REGISTER_NAME (regnum), reg_val[1]);
- else
- printf_unfiltered ("%s %lx%8.8lx\n", REGISTER_NAME (regnum),
- reg_val[0], reg_val[1]);
- }
- }
- else
- /* Note that real floating point values only start at
- FP4_REGNUM. FP0 and up are just status and error
- registers, which have integral (bit) values. */
- pa_print_fp_reg (regnum);
-}
-
-/********** new function ********************/
-void
-pa_do_strcat_registers_info (int regnum, int fpregs, struct ui_file *stream,
- enum precision_type precision)
-{
- char *raw_regs = alloca (DEPRECATED_REGISTER_BYTES);
- int i;
-
- /* Make a copy of gdb's save area (may cause actual
- reads from the target). */
- for (i = 0; i < NUM_REGS; i++)
- frame_register_read (deprecated_selected_frame, i,
- raw_regs + DEPRECATED_REGISTER_BYTE (i));
-
- if (regnum == -1)
- pa_strcat_registers (raw_regs, regnum, fpregs, stream);
-
- else if (regnum < FP4_REGNUM)
- {
- long reg_val[2];
-
- /* Why is the value not passed through "extract_signed_integer"
- as in "pa_print_registers" below? */
- pa_register_look_aside (raw_regs, regnum, ®_val[0]);
-
- if (!is_pa_2)
- {
- fprintf_unfiltered (stream, "%s %lx", REGISTER_NAME (regnum), reg_val[1]);
- }
- else
- {
- /* Fancy % formats to prevent leading zeros. */
- if (reg_val[0] == 0)
- fprintf_unfiltered (stream, "%s %lx", REGISTER_NAME (regnum),
- reg_val[1]);
- else
- fprintf_unfiltered (stream, "%s %lx%8.8lx", REGISTER_NAME (regnum),
- reg_val[0], reg_val[1]);
- }
- }
- else
- /* Note that real floating point values only start at
- FP4_REGNUM. FP0 and up are just status and error
- registers, which have integral (bit) values. */
- pa_strcat_fp_reg (regnum, stream, precision);
-}
-
-/* If this is a PA2.0 machine, fetch the real 64-bit register
- value. Otherwise use the info from gdb's saved register area.
-
- Note that reg_val is really expected to be an array of longs,
- with two elements. */
-static void
-pa_register_look_aside (char *raw_regs, int regnum, long *raw_val)
-{
- static int know_which = 0; /* False */
-
- int regaddr;
- unsigned int offset;
- int i;
- int start;
-
-
- char buf[MAX_REGISTER_SIZE];
- long long reg_val;
-
- if (!know_which)
- {
- if (CPU_PA_RISC2_0 == sysconf (_SC_CPU_VERSION))
- {
- is_pa_2 = (1 == 1);
- }
-
- know_which = 1; /* True */
- }
-
- raw_val[0] = 0;
- raw_val[1] = 0;
-
- if (!is_pa_2)
- {
- raw_val[1] = *(long *) (raw_regs + DEPRECATED_REGISTER_BYTE (regnum));
- return;
- }
-
- /* Code below copied from hppah-nat.c, with fixes for wide
- registers, using different area of save_state, etc. */
- if (regnum == FLAGS_REGNUM || regnum >= FP0_REGNUM ||
- !HAVE_STRUCT_SAVE_STATE_T || !HAVE_STRUCT_MEMBER_SS_WIDE)
- {
- /* Use narrow regs area of save_state and default macro. */
- offset = U_REGS_OFFSET;
- regaddr = register_addr (regnum, offset);
- start = 1;
- }
- else
- {
- /* Use wide regs area, and calculate registers as 8 bytes wide.
-
- We'd like to do this, but current version of "C" doesn't
- permit "offsetof":
-
- offset = offsetof(save_state_t, ss_wide);
-
- Note that to avoid "C" doing typed pointer arithmetic, we
- have to cast away the type in our offset calculation:
- otherwise we get an offset of 1! */
-
- /* NB: save_state_t is not available before HPUX 9.
- The ss_wide field is not available previous to HPUX 10.20,
- so to avoid compile-time warnings, we only compile this for
- PA 2.0 processors. This control path should only be followed
- if we're debugging a PA 2.0 processor, so this should not cause
- problems. */
-
- /* #if the following code out so that this file can still be
- compiled on older HPUX boxes (< 10.20) which don't have
- this structure/structure member. */
-#if HAVE_STRUCT_SAVE_STATE_T == 1 && HAVE_STRUCT_MEMBER_SS_WIDE == 1
- save_state_t temp;
-
- offset = ((int) &temp.ss_wide) - ((int) &temp);
- regaddr = offset + regnum * 8;
- start = 0;
-#endif
- }
-
- for (i = start; i < 2; i++)
- {
- errno = 0;
- raw_val[i] = call_ptrace (PT_RUREGS, PIDGET (inferior_ptid),
- (PTRACE_ARG3_TYPE) regaddr, 0);
- if (errno != 0)
- {
- /* Warning, not error, in case we are attached; sometimes the
- kernel doesn't let us at the registers. */
- char *err = safe_strerror (errno);
- char *msg = alloca (strlen (err) + 128);
- sprintf (msg, "reading register %s: %s", REGISTER_NAME (regnum), err);
- warning (msg);
- goto error_exit;
- }
-
- regaddr += sizeof (long);
- }
-
- if (regnum == PCOQ_HEAD_REGNUM || regnum == PCOQ_TAIL_REGNUM)
- raw_val[1] &= ~0x3; /* I think we're masking out space bits */
-
-error_exit:
- ;
-}
-
-/* "Info all-reg" command */
-
-static void
-pa_print_registers (char *raw_regs, int regnum, int fpregs)
-{
- int i, j;
- /* Alas, we are compiled so that "long long" is 32 bits */
- long raw_val[2];
- long long_val;
- int rows = 48, columns = 2;
-
- for (i = 0; i < rows; i++)
- {
- for (j = 0; j < columns; j++)
- {
- /* We display registers in column-major order. */
- int regnum = i + j * rows;
-
- /* Q: Why is the value passed through "extract_signed_integer",
- while above, in "pa_do_registers_info" it isn't?
- A: ? */
- pa_register_look_aside (raw_regs, regnum, &raw_val[0]);
-
- /* Even fancier % formats to prevent leading zeros
- and still maintain the output in columns. */
- if (!is_pa_2)
- {
- /* Being big-endian, on this machine the low bits
- (the ones we want to look at) are in the second longword. */
- long_val = extract_signed_integer (&raw_val[1], 4);
- printf_filtered ("%10.10s: %8lx ",
- REGISTER_NAME (regnum), long_val);
- }
- else
- {
- /* raw_val = extract_signed_integer(&raw_val, 8); */
- if (raw_val[0] == 0)
- printf_filtered ("%10.10s: %8lx ",
- REGISTER_NAME (regnum), raw_val[1]);
- else
- printf_filtered ("%10.10s: %8lx%8.8lx ",
- REGISTER_NAME (regnum),
- raw_val[0], raw_val[1]);
- }
- }
- printf_unfiltered ("\n");
- }
-
- if (fpregs)
- for (i = FP4_REGNUM; i < NUM_REGS; i++) /* FP4_REGNUM == 72 */
- pa_print_fp_reg (i);
-}
-
-/************* new function ******************/
-static void
-pa_strcat_registers (char *raw_regs, int regnum, int fpregs,
- struct ui_file *stream)
-{
- int i, j;
- long raw_val[2]; /* Alas, we are compiled so that "long long" is 32 bits */
- long long_val;
- enum precision_type precision;
-
- precision = unspecified_precision;
-
- for (i = 0; i < 18; i++)
- {
- for (j = 0; j < 4; j++)
- {
- /* Q: Why is the value passed through "extract_signed_integer",
- while above, in "pa_do_registers_info" it isn't?
- A: ? */
- pa_register_look_aside (raw_regs, i + (j * 18), &raw_val[0]);
-
- /* Even fancier % formats to prevent leading zeros
- and still maintain the output in columns. */
- if (!is_pa_2)
- {
- /* Being big-endian, on this machine the low bits
- (the ones we want to look at) are in the second longword. */
- long_val = extract_signed_integer (&raw_val[1], 4);
- fprintf_filtered (stream, "%8.8s: %8lx ",
- REGISTER_NAME (i + (j * 18)), long_val);
- }
- else
- {
- /* raw_val = extract_signed_integer(&raw_val, 8); */
- if (raw_val[0] == 0)
- fprintf_filtered (stream, "%8.8s: %8lx ",
- REGISTER_NAME (i + (j * 18)), raw_val[1]);
- else
- fprintf_filtered (stream, "%8.8s: %8lx%8.8lx ",
- REGISTER_NAME (i + (j * 18)), raw_val[0],
- raw_val[1]);
- }
- }
- fprintf_unfiltered (stream, "\n");
- }
-
- if (fpregs)
- for (i = FP4_REGNUM; i < NUM_REGS; i++) /* FP4_REGNUM == 72 */
- pa_strcat_fp_reg (i, stream, precision);
-}
-
-static void
-pa_print_fp_reg (int i)
-{
- char raw_buffer[MAX_REGISTER_SIZE];
- char virtual_buffer[MAX_REGISTER_SIZE];
-
- /* Get 32bits of data. */
- frame_register_read (deprecated_selected_frame, i, raw_buffer);
-
- /* Put it in the buffer. No conversions are ever necessary. */
- memcpy (virtual_buffer, raw_buffer, DEPRECATED_REGISTER_RAW_SIZE (i));
-
- fputs_filtered (REGISTER_NAME (i), gdb_stdout);
- print_spaces_filtered (8 - strlen (REGISTER_NAME (i)), gdb_stdout);
- fputs_filtered ("(single precision) ", gdb_stdout);
-
- val_print (DEPRECATED_REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, 0, gdb_stdout, 0,
- 1, 0, Val_pretty_default);
- printf_filtered ("\n");
-
- /* If "i" is even, then this register can also be a double-precision
- FP register. Dump it out as such. */
- if ((i % 2) == 0)
- {
- /* Get the data in raw format for the 2nd half. */
- frame_register_read (deprecated_selected_frame, i + 1, raw_buffer);
-
- /* Copy it into the appropriate part of the virtual buffer. */
- memcpy (virtual_buffer + DEPRECATED_REGISTER_RAW_SIZE (i), raw_buffer,
- DEPRECATED_REGISTER_RAW_SIZE (i));
-
- /* Dump it as a double. */
- fputs_filtered (REGISTER_NAME (i), gdb_stdout);
- print_spaces_filtered (8 - strlen (REGISTER_NAME (i)), gdb_stdout);
- fputs_filtered ("(double precision) ", gdb_stdout);
-
- val_print (builtin_type_double, virtual_buffer, 0, 0, gdb_stdout, 0,
- 1, 0, Val_pretty_default);
- printf_filtered ("\n");
- }
-}
-
-/*************** new function ***********************/
-static void
-pa_strcat_fp_reg (int i, struct ui_file *stream, enum precision_type precision)
-{
- char raw_buffer[MAX_REGISTER_SIZE];
- char virtual_buffer[MAX_REGISTER_SIZE];
-
- fputs_filtered (REGISTER_NAME (i), stream);
- print_spaces_filtered (8 - strlen (REGISTER_NAME (i)), stream);
-
- /* Get 32bits of data. */
- frame_register_read (deprecated_selected_frame, i, raw_buffer);
-
- /* Put it in the buffer. No conversions are ever necessary. */
- memcpy (virtual_buffer, raw_buffer, DEPRECATED_REGISTER_RAW_SIZE (i));
-
- if (precision == double_precision && (i % 2) == 0)
- {
-
- char raw_buf[MAX_REGISTER_SIZE];
-
- /* Get the data in raw format for the 2nd half. */
- frame_register_read (deprecated_selected_frame, i + 1, raw_buf);
-
- /* Copy it into the appropriate part of the virtual buffer. */
- memcpy (virtual_buffer + DEPRECATED_REGISTER_RAW_SIZE (i), raw_buf,
- DEPRECATED_REGISTER_RAW_SIZE (i));
-
- val_print (builtin_type_double, virtual_buffer, 0, 0, stream, 0,
- 1, 0, Val_pretty_default);
-
- }
- else
- {
- val_print (DEPRECATED_REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, 0, stream, 0,
- 1, 0, Val_pretty_default);
- }
-
-}
-
-/* Return one if PC is in the call path of a trampoline, else return zero.
-
- Note we return one for *any* call trampoline (long-call, arg-reloc), not
- just shared library trampolines (import, export). */
-
-int
-hppa_in_solib_call_trampoline (CORE_ADDR pc, char *name)
-{
- struct minimal_symbol *minsym;
- struct unwind_table_entry *u;
- static CORE_ADDR dyncall = 0;
- static CORE_ADDR sr4export = 0;
-
-#ifdef GDB_TARGET_IS_HPPA_20W
- /* PA64 has a completely different stub/trampoline scheme. Is it
- better? Maybe. It's certainly harder to determine with any
- certainty that we are in a stub because we can not refer to the
- unwinders to help.
-
- The heuristic is simple. Try to lookup the current PC value in th
- minimal symbol table. If that fails, then assume we are not in a
- stub and return.
-
- Then see if the PC value falls within the section bounds for the
- section containing the minimal symbol we found in the first
- step. If it does, then assume we are not in a stub and return.
-
- Finally peek at the instructions to see if they look like a stub. */
- {
- struct minimal_symbol *minsym;
- asection *sec;
- CORE_ADDR addr;
- int insn, i;
-
- minsym = lookup_minimal_symbol_by_pc (pc);
- if (! minsym)
- return 0;
-
- sec = SYMBOL_BFD_SECTION (minsym);
-
- if (bfd_get_section_vma (sec->owner, sec) <= pc
- && pc < (bfd_get_section_vma (sec->owner, sec)
- + bfd_section_size (sec->owner, sec)))
- return 0;
-
- /* We might be in a stub. Peek at the instructions. Stubs are 3
- instructions long. */
- insn = read_memory_integer (pc, 4);
-
- /* Find out where we think we are within the stub. */
- if ((insn & 0xffffc00e) == 0x53610000)
- addr = pc;
- else if ((insn & 0xffffffff) == 0xe820d000)
- addr = pc - 4;
- else if ((insn & 0xffffc00e) == 0x537b0000)
- addr = pc - 8;
- else
- return 0;
-
- /* Now verify each insn in the range looks like a stub instruction. */
- insn = read_memory_integer (addr, 4);
- if ((insn & 0xffffc00e) != 0x53610000)
- return 0;
-
- /* Now verify each insn in the range looks like a stub instruction. */
- insn = read_memory_integer (addr + 4, 4);
- if ((insn & 0xffffffff) != 0xe820d000)
- return 0;
-
- /* Now verify each insn in the range looks like a stub instruction. */
- insn = read_memory_integer (addr + 8, 4);
- if ((insn & 0xffffc00e) != 0x537b0000)
- return 0;
-
- /* Looks like a stub. */
- return 1;
- }
-#endif
-
- /* FIXME XXX - dyncall and sr4export must be initialized whenever we get a
- new exec file */
-
- /* First see if PC is in one of the two C-library trampolines. */
- if (!dyncall)
- {
- minsym = lookup_minimal_symbol ("$$dyncall", NULL, NULL);
- if (minsym)
- dyncall = SYMBOL_VALUE_ADDRESS (minsym);
- else
- dyncall = -1;
- }
-
- if (!sr4export)
- {
- minsym = lookup_minimal_symbol ("_sr4export", NULL, NULL);
- if (minsym)
- sr4export = SYMBOL_VALUE_ADDRESS (minsym);
- else
- sr4export = -1;
- }
-
- if (pc == dyncall || pc == sr4export)
- return 1;
-
- minsym = lookup_minimal_symbol_by_pc (pc);
- if (minsym && strcmp (DEPRECATED_SYMBOL_NAME (minsym), ".stub") == 0)
- return 1;
-
- /* Get the unwind descriptor corresponding to PC, return zero
- if no unwind was found. */
- u = find_unwind_entry (pc);
- if (!u)
- return 0;
-
- /* If this isn't a linker stub, then return now. */
- if (u->stub_unwind.stub_type == 0)
- return 0;
-
- /* By definition a long-branch stub is a call stub. */
- if (u->stub_unwind.stub_type == LONG_BRANCH)
- return 1;
-
- /* The call and return path execute the same instructions within
- an IMPORT stub! So an IMPORT stub is both a call and return
- trampoline. */
- if (u->stub_unwind.stub_type == IMPORT)
- return 1;
-
- /* Parameter relocation stubs always have a call path and may have a
- return path. */
- if (u->stub_unwind.stub_type == PARAMETER_RELOCATION
- || u->stub_unwind.stub_type == EXPORT)
- {
- CORE_ADDR addr;
-
- /* Search forward from the current PC until we hit a branch
- or the end of the stub. */
- for (addr = pc; addr <= u->region_end; addr += 4)
- {
- unsigned long insn;
-
- insn = read_memory_integer (addr, 4);
-
- /* Does it look like a bl? If so then it's the call path, if
- we find a bv or be first, then we're on the return path. */
- if ((insn & 0xfc00e000) == 0xe8000000)
- return 1;
- else if ((insn & 0xfc00e001) == 0xe800c000
- || (insn & 0xfc000000) == 0xe0000000)
- return 0;
- }
-
- /* Should never happen. */
- warning ("Unable to find branch in parameter relocation stub.\n");
- return 0;
- }
-
- /* Unknown stub type. For now, just return zero. */
- return 0;
-}
-
-/* Return one if PC is in the return path of a trampoline, else return zero.
-
- Note we return one for *any* call trampoline (long-call, arg-reloc), not
- just shared library trampolines (import, export). */
-
-int
-hppa_in_solib_return_trampoline (CORE_ADDR pc, char *name)
-{
- struct unwind_table_entry *u;
-
- /* Get the unwind descriptor corresponding to PC, return zero
- if no unwind was found. */
- u = find_unwind_entry (pc);
- if (!u)
- return 0;
-
- /* If this isn't a linker stub or it's just a long branch stub, then
- return zero. */
- if (u->stub_unwind.stub_type == 0 || u->stub_unwind.stub_type == LONG_BRANCH)
- return 0;
-
- /* The call and return path execute the same instructions within
- an IMPORT stub! So an IMPORT stub is both a call and return
- trampoline. */
- if (u->stub_unwind.stub_type == IMPORT)
- return 1;
-
- /* Parameter relocation stubs always have a call path and may have a
- return path. */
- if (u->stub_unwind.stub_type == PARAMETER_RELOCATION
- || u->stub_unwind.stub_type == EXPORT)
- {
- CORE_ADDR addr;
-
- /* Search forward from the current PC until we hit a branch
- or the end of the stub. */
- for (addr = pc; addr <= u->region_end; addr += 4)
- {
- unsigned long insn;
-
- insn = read_memory_integer (addr, 4);
-
- /* Does it look like a bl? If so then it's the call path, if
- we find a bv or be first, then we're on the return path. */
- if ((insn & 0xfc00e000) == 0xe8000000)
- return 0;
- else if ((insn & 0xfc00e001) == 0xe800c000
- || (insn & 0xfc000000) == 0xe0000000)
- return 1;
- }
-
- /* Should never happen. */
- warning ("Unable to find branch in parameter relocation stub.\n");
- return 0;
- }
-
- /* Unknown stub type. For now, just return zero. */
- return 0;
-
-}
-
-/* Figure out if PC is in a trampoline, and if so find out where
- the trampoline will jump to. If not in a trampoline, return zero.
-
- Simple code examination probably is not a good idea since the code
- sequences in trampolines can also appear in user code.
-
- We use unwinds and information from the minimal symbol table to
- determine when we're in a trampoline. This won't work for ELF
- (yet) since it doesn't create stub unwind entries. Whether or
- not ELF will create stub unwinds or normal unwinds for linker
- stubs is still being debated.
-
- This should handle simple calls through dyncall or sr4export,
- long calls, argument relocation stubs, and dyncall/sr4export
- calling an argument relocation stub. It even handles some stubs
- used in dynamic executables. */
-
-CORE_ADDR
-hppa_skip_trampoline_code (CORE_ADDR pc)
+static int
+hppa_alignof (struct type *type)
{
- long orig_pc = pc;
- long prev_inst, curr_inst, loc;
- static CORE_ADDR dyncall = 0;
- static CORE_ADDR dyncall_external = 0;
- static CORE_ADDR sr4export = 0;
- struct minimal_symbol *msym;
- struct unwind_table_entry *u;
-
- /* FIXME XXX - dyncall and sr4export must be initialized whenever we get a
- new exec file */
-
- if (!dyncall)
- {
- msym = lookup_minimal_symbol ("$$dyncall", NULL, NULL);
- if (msym)
- dyncall = SYMBOL_VALUE_ADDRESS (msym);
- else
- dyncall = -1;
- }
-
- if (!dyncall_external)
- {
- msym = lookup_minimal_symbol ("$$dyncall_external", NULL, NULL);
- if (msym)
- dyncall_external = SYMBOL_VALUE_ADDRESS (msym);
- else
- dyncall_external = -1;
- }
-
- if (!sr4export)
- {
- msym = lookup_minimal_symbol ("_sr4export", NULL, NULL);
- if (msym)
- sr4export = SYMBOL_VALUE_ADDRESS (msym);
- else
- sr4export = -1;
- }
-
- /* Addresses passed to dyncall may *NOT* be the actual address
- of the function. So we may have to do something special. */
- if (pc == dyncall)
- {
- pc = (CORE_ADDR) read_register (22);
-
- /* If bit 30 (counting from the left) is on, then pc is the address of
- the PLT entry for this function, not the address of the function
- itself. Bit 31 has meaning too, but only for MPE. */
- if (pc & 0x2)
- pc = (CORE_ADDR) read_memory_integer (pc & ~0x3, TARGET_PTR_BIT / 8);
- }
- if (pc == dyncall_external)
- {
- pc = (CORE_ADDR) read_register (22);
- pc = (CORE_ADDR) read_memory_integer (pc & ~0x3, TARGET_PTR_BIT / 8);
- }
- else if (pc == sr4export)
- pc = (CORE_ADDR) (read_register (22));
-
- /* Get the unwind descriptor corresponding to PC, return zero
- if no unwind was found. */
- u = find_unwind_entry (pc);
- if (!u)
- return 0;
-
- /* If this isn't a linker stub, then return now. */
- /* elz: attention here! (FIXME) because of a compiler/linker
- error, some stubs which should have a non zero stub_unwind.stub_type
- have unfortunately a value of zero. So this function would return here
- as if we were not in a trampoline. To fix this, we go look at the partial
- symbol information, which reports this guy as a stub.
- (FIXME): Unfortunately, we are not that lucky: it turns out that the
- partial symbol information is also wrong sometimes. This is because
- when it is entered (somread.c::som_symtab_read()) it can happen that
- if the type of the symbol (from the som) is Entry, and the symbol is
- in a shared library, then it can also be a trampoline. This would
- be OK, except that I believe the way they decide if we are ina shared library
- does not work. SOOOO..., even if we have a regular function w/o trampolines
- its minimal symbol can be assigned type mst_solib_trampoline.
- Also, if we find that the symbol is a real stub, then we fix the unwind
- descriptor, and define the stub type to be EXPORT.
- Hopefully this is correct most of the times. */
- if (u->stub_unwind.stub_type == 0)
- {
-
-/* elz: NOTE (FIXME!) once the problem with the unwind information is fixed
- we can delete all the code which appears between the lines */
-/*--------------------------------------------------------------------------*/
- msym = lookup_minimal_symbol_by_pc (pc);
-
- if (msym == NULL || MSYMBOL_TYPE (msym) != mst_solib_trampoline)
- return orig_pc == pc ? 0 : pc & ~0x3;
-
- else if (msym != NULL && MSYMBOL_TYPE (msym) == mst_solib_trampoline)
- {
- struct objfile *objfile;
- struct minimal_symbol *msymbol;
- int function_found = 0;
-
- /* go look if there is another minimal symbol with the same name as
- this one, but with type mst_text. This would happen if the msym
- is an actual trampoline, in which case there would be another
- symbol with the same name corresponding to the real function */
-
- ALL_MSYMBOLS (objfile, msymbol)
- {
- if (MSYMBOL_TYPE (msymbol) == mst_text
- && DEPRECATED_STREQ (DEPRECATED_SYMBOL_NAME (msymbol), DEPRECATED_SYMBOL_NAME (msym)))
- {
- function_found = 1;
- break;
- }
- }
-
- if (function_found)
- /* the type of msym is correct (mst_solib_trampoline), but
- the unwind info is wrong, so set it to the correct value */
- u->stub_unwind.stub_type = EXPORT;
- else
- /* the stub type info in the unwind is correct (this is not a
- trampoline), but the msym type information is wrong, it
- should be mst_text. So we need to fix the msym, and also
- get out of this function */
- {
- MSYMBOL_TYPE (msym) = mst_text;
- return orig_pc == pc ? 0 : pc & ~0x3;
- }
- }
-
-/*--------------------------------------------------------------------------*/
- }
-
- /* It's a stub. Search for a branch and figure out where it goes.
- Note we have to handle multi insn branch sequences like ldil;ble.
- Most (all?) other branches can be determined by examining the contents
- of certain registers and the stack. */
-
- loc = pc;
- curr_inst = 0;
- prev_inst = 0;
- while (1)
+ int max_align, align, i;
+ CHECK_TYPEDEF (type);
+ switch (TYPE_CODE (type))
{
- /* Make sure we haven't walked outside the range of this stub. */
- if (u != find_unwind_entry (loc))
- {
- warning ("Unable to find branch in linker stub");
- return orig_pc == pc ? 0 : pc & ~0x3;
- }
-
- prev_inst = curr_inst;
- curr_inst = read_memory_integer (loc, 4);
-
- /* Does it look like a branch external using %r1? Then it's the
- branch from the stub to the actual function. */
- if ((curr_inst & 0xffe0e000) == 0xe0202000)
- {
- /* Yup. See if the previous instruction loaded
- a value into %r1. If so compute and return the jump address. */
- if ((prev_inst & 0xffe00000) == 0x20200000)
- return (extract_21 (prev_inst) + extract_17 (curr_inst)) & ~0x3;
- else
- {
- warning ("Unable to find ldil X,%%r1 before ble Y(%%sr4,%%r1).");
- return orig_pc == pc ? 0 : pc & ~0x3;
- }
- }
-
- /* Does it look like a be 0(sr0,%r21)? OR
- Does it look like a be, n 0(sr0,%r21)? OR
- Does it look like a bve (r21)? (this is on PA2.0)
- Does it look like a bve, n(r21)? (this is also on PA2.0)
- That's the branch from an
- import stub to an export stub.
-
- It is impossible to determine the target of the branch via
- simple examination of instructions and/or data (consider
- that the address in the plabel may be the address of the
- bind-on-reference routine in the dynamic loader).
-
- So we have try an alternative approach.
-
- Get the name of the symbol at our current location; it should
- be a stub symbol with the same name as the symbol in the
- shared library.
-
- Then lookup a minimal symbol with the same name; we should
- get the minimal symbol for the target routine in the shared
- library as those take precedence of import/export stubs. */
- if ((curr_inst == 0xe2a00000) ||
- (curr_inst == 0xe2a00002) ||
- (curr_inst == 0xeaa0d000) ||
- (curr_inst == 0xeaa0d002))
- {
- struct minimal_symbol *stubsym, *libsym;
-
- stubsym = lookup_minimal_symbol_by_pc (loc);
- if (stubsym == NULL)
- {
- warning ("Unable to find symbol for 0x%lx", loc);
- return orig_pc == pc ? 0 : pc & ~0x3;
- }
-
- libsym = lookup_minimal_symbol (DEPRECATED_SYMBOL_NAME (stubsym), NULL, NULL);
- if (libsym == NULL)
- {
- warning ("Unable to find library symbol for %s\n",
- DEPRECATED_SYMBOL_NAME (stubsym));
- return orig_pc == pc ? 0 : pc & ~0x3;
- }
-
- return SYMBOL_VALUE (libsym);
- }
-
- /* Does it look like bl X,%rp or bl X,%r0? Another way to do a
- branch from the stub to the actual function. */
- /*elz */
- else if ((curr_inst & 0xffe0e000) == 0xe8400000
- || (curr_inst & 0xffe0e000) == 0xe8000000
- || (curr_inst & 0xffe0e000) == 0xe800A000)
- return (loc + extract_17 (curr_inst) + 8) & ~0x3;
-
- /* Does it look like bv (rp)? Note this depends on the
- current stack pointer being the same as the stack
- pointer in the stub itself! This is a branch on from the
- stub back to the original caller. */
- /*else if ((curr_inst & 0xffe0e000) == 0xe840c000) */
- else if ((curr_inst & 0xffe0f000) == 0xe840c000)
+ case TYPE_CODE_PTR:
+ case TYPE_CODE_INT:
+ case TYPE_CODE_FLT:
+ return TYPE_LENGTH (type);
+ case TYPE_CODE_ARRAY:
+ return hppa_alignof (TYPE_FIELD_TYPE (type, 0));
+ case TYPE_CODE_STRUCT:
+ case TYPE_CODE_UNION:
+ max_align = 1;
+ for (i = 0; i < TYPE_NFIELDS (type); i++)
{
- /* Yup. See if the previous instruction loaded
- rp from sp - 8. */
- if (prev_inst == 0x4bc23ff1)
- return (read_memory_integer
- (read_register (SP_REGNUM) - 8, 4)) & ~0x3;
- else
+ /* Bit fields have no real alignment. */
+ /* if (!TYPE_FIELD_BITPOS (type, i)) */
+ if (!TYPE_FIELD_BITSIZE (type, i)) /* elz: this should be bitsize */
{
- warning ("Unable to find restore of %%rp before bv (%%rp).");
- return orig_pc == pc ? 0 : pc & ~0x3;
+ align = hppa_alignof (TYPE_FIELD_TYPE (type, i));
+ max_align = max (max_align, align);
}
}
-
- /* elz: added this case to capture the new instruction
- at the end of the return part of an export stub used by
- the PA2.0: BVE, n (rp) */
- else if ((curr_inst & 0xffe0f000) == 0xe840d000)
- {
- return (read_memory_integer
- (read_register (SP_REGNUM) - 24, TARGET_PTR_BIT / 8)) & ~0x3;
- }
-
- /* What about be,n 0(sr0,%rp)? It's just another way we return to
- the original caller from the stub. Used in dynamic executables. */
- else if (curr_inst == 0xe0400002)
- {
- /* The value we jump to is sitting in sp - 24. But that's
- loaded several instructions before the be instruction.
- I guess we could check for the previous instruction being
- mtsp %r1,%sr0 if we want to do sanity checking. */
- return (read_memory_integer
- (read_register (SP_REGNUM) - 24, TARGET_PTR_BIT / 8)) & ~0x3;
- }
-
- /* Haven't found the branch yet, but we're still in the stub.
- Keep looking. */
- loc += 4;
+ return max_align;
+ default:
+ return 4;
}
}
-
/* For the given instruction (INST), return any adjustment it makes
to the stack pointer or zero for no adjustment.
/* The most common way to perform a stack adjustment ldo X(sp),sp */
if ((inst & 0xffffc000) == 0x37de0000)
- return extract_14 (inst);
+ return hppa_extract_14 (inst);
/* stwm X,D(sp) */
if ((inst & 0xffe00000) == 0x6fc00000)
- return extract_14 (inst);
+ return hppa_extract_14 (inst);
/* std,ma X,D(sp) */
if ((inst & 0xffe00008) == 0x73c00008)
save high bits in save_high21 for later use. */
if ((inst & 0xffe00000) == 0x28200000)
{
- save_high21 = extract_21 (inst);
+ save_high21 = hppa_extract_21 (inst);
return 0;
}
if ((inst & 0xffff0000) == 0x343e0000)
- return save_high21 + extract_14 (inst);
+ return save_high21 + hppa_extract_14 (inst);
/* fstws as used by the HP compilers. */
if ((inst & 0xffffffe0) == 0x2fd01220)
- return extract_5_load (inst);
+ return hppa_extract_5_load (inst);
/* No adjustment. */
return 0;
|| (inst >> 26) == 0x1f
|| ((inst >> 26) == 0x1f
&& ((inst >> 6) == 0xa)))
- return extract_5R_store (inst);
+ return hppa_extract_5R_store (inst);
/* Does it look like a std? */
if ((inst >> 26) == 0x1c
|| ((inst >> 26) == 0x03
&& ((inst >> 6) & 0xf) == 0xb))
- return extract_5R_store (inst);
+ return hppa_extract_5R_store (inst);
/* Does it look like a stwm? GCC & HPC may use this in prologues. */
if ((inst >> 26) == 0x1b)
- return extract_5R_store (inst);
+ return hppa_extract_5R_store (inst);
/* Does it look like sth or stb? HPC versions 9.0 and later use these
too. */
|| ((inst >> 26) == 0x3
&& (((inst >> 6) & 0xf) == 0x8
|| (inst >> 6) & 0xf) == 0x9))
- return extract_5R_store (inst);
+ return hppa_extract_5R_store (inst);
return 0;
}
{
/* is this an FSTD ? */
if ((inst & 0xfc00dfc0) == 0x2c001200)
- return extract_5r_store (inst);
+ return hppa_extract_5r_store (inst);
if ((inst & 0xfc000002) == 0x70000002)
- return extract_5R_store (inst);
+ return hppa_extract_5R_store (inst);
/* is this an FSTW ? */
if ((inst & 0xfc00df80) == 0x24001200)
- return extract_5r_store (inst);
+ return hppa_extract_5r_store (inst);
if ((inst & 0xfc000002) == 0x7c000000)
- return extract_5R_store (inst);
+ return hppa_extract_5R_store (inst);
return 0;
}
be in the prologue. */
-CORE_ADDR
-skip_prologue_hard_way (CORE_ADDR pc)
+static CORE_ADDR
+skip_prologue_hard_way (CORE_ADDR pc, int stop_before_branch)
{
char buf[4];
CORE_ADDR orig_pc = pc;
unsigned long inst, stack_remaining, save_gr, save_fr, save_rp, save_sp;
unsigned long args_stored, status, i, restart_gr, restart_fr;
struct unwind_table_entry *u;
+ int final_iteration;
restart_gr = 0;
restart_fr = 0;
for (i = 3; i < u->Entry_GR + 3; i++)
{
/* Frame pointer gets saved into a special location. */
- if (u->Save_SP && i == DEPRECATED_FP_REGNUM)
+ if (u->Save_SP && i == HPPA_FP_REGNUM)
continue;
save_gr |= (1 << i);
save_fr |= (1 << i);
save_fr &= ~restart_fr;
+ final_iteration = 0;
+
/* Loop until we find everything of interest or hit a branch.
For unoptimized GCC code and for any HP CC code this will never ever
old_save_sp = save_sp;
old_stack_remaining = stack_remaining;
- status = target_read_memory (pc, buf, 4);
+ status = deprecated_read_memory_nobpt (pc, buf, 4);
inst = extract_unsigned_integer (buf, 4);
/* Yow! */
while (reg_num >= (TARGET_PTR_BIT == 64 ? 19 : 23) && reg_num <= 26)
{
pc += 4;
- status = target_read_memory (pc, buf, 4);
+ status = deprecated_read_memory_nobpt (pc, buf, 4);
inst = extract_unsigned_integer (buf, 4);
if (status != 0)
return pc;
reg_num = inst_saves_fr (inst);
save_fr &= ~(1 << reg_num);
- status = target_read_memory (pc + 4, buf, 4);
+ status = deprecated_read_memory_nobpt (pc + 4, buf, 4);
next_inst = extract_unsigned_integer (buf, 4);
/* Yow! */
while (reg_num >= 4 && reg_num <= (TARGET_PTR_BIT == 64 ? 11 : 7))
{
pc += 8;
- status = target_read_memory (pc, buf, 4);
+ status = deprecated_read_memory_nobpt (pc, buf, 4);
inst = extract_unsigned_integer (buf, 4);
if (status != 0)
return pc;
if ((inst & 0xfc000000) != 0x34000000)
break;
- status = target_read_memory (pc + 4, buf, 4);
+ status = deprecated_read_memory_nobpt (pc + 4, buf, 4);
next_inst = extract_unsigned_integer (buf, 4);
if (status != 0)
return pc;
/* Quit if we hit any kind of branch. This can happen if a prologue
instruction is in the delay slot of the first call/branch. */
- if (is_branch (inst))
+ if (is_branch (inst) && stop_before_branch)
break;
/* What a crock. The HP compilers set args_stored even if no
/* Bump the PC. */
pc += 4;
+
+ /* !stop_before_branch, so also look at the insn in the delay slot
+ of the branch. */
+ if (final_iteration)
+ break;
+ if (is_branch (inst))
+ final_iteration = 1;
}
/* We've got a tenative location for the end of the prologue. However
/* To skip prologues, I use this predicate. Returns either PC itself
if the code at PC does not look like a function prologue; otherwise
- returns an address that (if we're lucky) follows the prologue. If
- LENIENT, then we must skip everything which is involved in setting
- up the frame (it's OK to skip more, just so long as we don't skip
- anything which might clobber the registers which are being saved.
- Currently we must not skip more on the alpha, but we might the lenient
- stuff some day. */
+ returns an address that (if we're lucky) follows the prologue.
+
+ hppa_skip_prologue is called by gdb to place a breakpoint in a function.
+ It doesn't necessarily skips all the insns in the prologue. In fact
+ we might not want to skip all the insns because a prologue insn may
+ appear in the delay slot of the first branch, and we don't want to
+ skip over the branch in that case. */
-CORE_ADDR
+static CORE_ADDR
hppa_skip_prologue (CORE_ADDR pc)
{
unsigned long inst;
if (post_prologue_pc != 0)
return max (pc, post_prologue_pc);
else
- return (skip_prologue_hard_way (pc));
+ return (skip_prologue_hard_way (pc, 1));
}
-/* Put here the code to store, into the SAVED_REGS, the addresses of
- the saved registers of frame described by FRAME_INFO. This
- includes special registers such as pc and fp saved in special ways
- in the stack frame. sp is even more special: the address we return
- for it IS the sp for the next frame. */
+struct hppa_frame_cache
+{
+ CORE_ADDR base;
+ struct trad_frame_saved_reg *saved_regs;
+};
-void
-hppa_frame_find_saved_regs (struct frame_info *frame_info,
- CORE_ADDR frame_saved_regs[])
+static struct hppa_frame_cache *
+hppa_frame_cache (struct frame_info *next_frame, void **this_cache)
{
- CORE_ADDR pc;
+ struct hppa_frame_cache *cache;
+ long saved_gr_mask;
+ long saved_fr_mask;
+ CORE_ADDR this_sp;
+ long frame_size;
struct unwind_table_entry *u;
- unsigned long inst, stack_remaining, save_gr, save_fr, save_rp, save_sp;
- int status, i, reg;
- char buf[4];
- int fp_loc = -1;
- int final_iteration;
+ CORE_ADDR prologue_end;
+ int fp_in_r1 = 0;
+ int i;
- /* Zero out everything. */
- memset (frame_saved_regs, '\0', SIZEOF_FRAME_SAVED_REGS);
-
- /* Call dummy frames always look the same, so there's no need to
- examine the dummy code to determine locations of saved registers;
- instead, let find_dummy_frame_regs fill in the correct offsets
- for the saved registers. */
- if ((get_frame_pc (frame_info) >= get_frame_base (frame_info)
- && (get_frame_pc (frame_info)
- <= (get_frame_base (frame_info)
- /* A call dummy is sized in words, but it is actually a
- series of instructions. Account for that scaling
- factor. */
- + ((DEPRECATED_REGISTER_SIZE / INSTRUCTION_SIZE)
- * DEPRECATED_CALL_DUMMY_LENGTH)
- /* Similarly we have to account for 64bit wide register
- saves. */
- + (32 * DEPRECATED_REGISTER_SIZE)
- /* We always consider FP regs 8 bytes long. */
- + (NUM_REGS - FP0_REGNUM) * 8
- /* Similarly we have to account for 64bit wide register
- saves. */
- + (6 * DEPRECATED_REGISTER_SIZE)))))
- find_dummy_frame_regs (frame_info, frame_saved_regs);
-
- /* Interrupt handlers are special too. They lay out the register
- state in the exact same order as the register numbers in GDB. */
- if (pc_in_interrupt_handler (get_frame_pc (frame_info)))
- {
- for (i = 0; i < NUM_REGS; i++)
- {
- /* SP is a little special. */
- if (i == SP_REGNUM)
- frame_saved_regs[SP_REGNUM]
- = read_memory_integer (get_frame_base (frame_info) + SP_REGNUM * 4,
- TARGET_PTR_BIT / 8);
- else
- frame_saved_regs[i] = get_frame_base (frame_info) + i * 4;
- }
- return;
- }
+ if (hppa_debug)
+ fprintf_unfiltered (gdb_stdlog, "{ hppa_frame_cache (frame=%d) -> ",
+ frame_relative_level(next_frame));
-#ifdef FRAME_FIND_SAVED_REGS_IN_SIGTRAMP
- /* Handle signal handler callers. */
- if ((get_frame_type (frame_info) == SIGTRAMP_FRAME))
+ if ((*this_cache) != NULL)
{
- FRAME_FIND_SAVED_REGS_IN_SIGTRAMP (frame_info, frame_saved_regs);
- return;
+ if (hppa_debug)
+ fprintf_unfiltered (gdb_stdlog, "base=0x%s (cached) }",
+ paddr_nz (((struct hppa_frame_cache *)*this_cache)->base));
+ return (*this_cache);
}
-#endif
-
- /* Get the starting address of the function referred to by the PC
- saved in frame. */
- pc = get_frame_func (frame_info);
+ cache = FRAME_OBSTACK_ZALLOC (struct hppa_frame_cache);
+ (*this_cache) = cache;
+ cache->saved_regs = trad_frame_alloc_saved_regs (next_frame);
/* Yow! */
- u = find_unwind_entry (pc);
+ u = find_unwind_entry (frame_pc_unwind (next_frame));
if (!u)
- return;
-
- /* This is how much of a frame adjustment we need to account for. */
- stack_remaining = u->Total_frame_size << 3;
-
- /* Magic register saves we want to know about. */
- save_rp = u->Save_RP;
- save_sp = u->Save_SP;
+ {
+ if (hppa_debug)
+ fprintf_unfiltered (gdb_stdlog, "base=NULL (no unwind entry) }");
+ return (*this_cache);
+ }
/* Turn the Entry_GR field into a bitmask. */
- save_gr = 0;
+ saved_gr_mask = 0;
for (i = 3; i < u->Entry_GR + 3; i++)
{
/* Frame pointer gets saved into a special location. */
- if (u->Save_SP && i == DEPRECATED_FP_REGNUM)
+ if (u->Save_SP && i == HPPA_FP_REGNUM)
continue;
-
- save_gr |= (1 << i);
+
+ saved_gr_mask |= (1 << i);
}
/* Turn the Entry_FR field into a bitmask too. */
- save_fr = 0;
+ saved_fr_mask = 0;
for (i = 12; i < u->Entry_FR + 12; i++)
- save_fr |= (1 << i);
-
- /* The frame always represents the value of %sp at entry to the
- current function (and is thus equivalent to the "saved" stack
- pointer. */
- frame_saved_regs[SP_REGNUM] = get_frame_base (frame_info);
+ saved_fr_mask |= (1 << i);
/* Loop until we find everything of interest or hit a branch.
Some unexpected things are expected with debugging optimized code, so
we allow this routine to walk past user instructions in optimized
GCC code. */
- final_iteration = 0;
- while ((save_gr || save_fr || save_rp || save_sp || stack_remaining > 0)
- && pc <= get_frame_pc (frame_info))
- {
- status = target_read_memory (pc, buf, 4);
- inst = extract_unsigned_integer (buf, 4);
+ {
+ int final_iteration = 0;
+ CORE_ADDR pc, end_pc;
+ int looking_for_sp = u->Save_SP;
+ int looking_for_rp = u->Save_RP;
+ int fp_loc = -1;
+
+ /* We have to use skip_prologue_hard_way instead of just
+ skip_prologue_using_sal, in case we stepped into a function without
+ symbol information. hppa_skip_prologue also bounds the returned
+ pc by the passed in pc, so it will not return a pc in the next
+ function.
+
+ We used to call hppa_skip_prologue to find the end of the prologue,
+ but if some non-prologue instructions get scheduled into the prologue,
+ and the program is compiled with debug information, the "easy" way
+ in hppa_skip_prologue will return a prologue end that is too early
+ for us to notice any potential frame adjustments. */
+
+ /* We used to use frame_func_unwind () to locate the beginning of the
+ function to pass to skip_prologue (). However, when objects are
+ compiled without debug symbols, frame_func_unwind can return the wrong
+ function (or 0). We can do better than that by using unwind records. */
+
+ prologue_end = skip_prologue_hard_way (u->region_start, 0);
+ end_pc = frame_pc_unwind (next_frame);
+
+ if (prologue_end != 0 && end_pc > prologue_end)
+ end_pc = prologue_end;
+
+ frame_size = 0;
+
+ for (pc = u->region_start;
+ ((saved_gr_mask || saved_fr_mask
+ || looking_for_sp || looking_for_rp
+ || frame_size < (u->Total_frame_size << 3))
+ && pc < end_pc);
+ pc += 4)
+ {
+ int reg;
+ char buf4[4];
+ long inst;
- /* Yow! */
- if (status != 0)
- return;
+ if (!safe_frame_unwind_memory (next_frame, pc, buf4,
+ sizeof buf4))
+ {
+ error ("Cannot read instruction at 0x%s\n", paddr_nz (pc));
+ return (*this_cache);
+ }
- /* Note the interesting effects of this instruction. */
- stack_remaining -= prologue_inst_adjust_sp (inst);
+ inst = extract_unsigned_integer (buf4, sizeof buf4);
- /* There are limited ways to store the return pointer into the
- stack. */
- if (inst == 0x6bc23fd9) /* stw rp,-0x14(sr0,sp) */
- {
- save_rp = 0;
- frame_saved_regs[RP_REGNUM] = get_frame_base (frame_info) - 20;
- }
- else if (inst == 0x0fc212c1) /* std rp,-0x10(sr0,sp) */
- {
- save_rp = 0;
- frame_saved_regs[RP_REGNUM] = get_frame_base (frame_info) - 16;
- }
+ /* Note the interesting effects of this instruction. */
+ frame_size += prologue_inst_adjust_sp (inst);
+
+ /* There are limited ways to store the return pointer into the
+ stack. */
+ if (inst == 0x6bc23fd9) /* stw rp,-0x14(sr0,sp) */
+ {
+ looking_for_rp = 0;
+ cache->saved_regs[HPPA_RP_REGNUM].addr = -20;
+ }
+ else if (inst == 0x6bc23fd1) /* stw rp,-0x18(sr0,sp) */
+ {
+ looking_for_rp = 0;
+ cache->saved_regs[HPPA_RP_REGNUM].addr = -24;
+ }
+ else if (inst == 0x0fc212c1) /* std rp,-0x10(sr0,sp) */
+ {
+ looking_for_rp = 0;
+ cache->saved_regs[HPPA_RP_REGNUM].addr = -16;
+ }
+
+ /* Check to see if we saved SP into the stack. This also
+ happens to indicate the location of the saved frame
+ pointer. */
+ if ((inst & 0xffffc000) == 0x6fc10000 /* stw,ma r1,N(sr0,sp) */
+ || (inst & 0xffffc00c) == 0x73c10008) /* std,ma r1,N(sr0,sp) */
+ {
+ looking_for_sp = 0;
+ cache->saved_regs[HPPA_FP_REGNUM].addr = 0;
+ }
+ else if (inst == 0x08030241) /* copy %r3, %r1 */
+ {
+ fp_in_r1 = 1;
+ }
+
+ /* Account for general and floating-point register saves. */
+ reg = inst_saves_gr (inst);
+ if (reg >= 3 && reg <= 18
+ && (!u->Save_SP || reg != HPPA_FP_REGNUM))
+ {
+ saved_gr_mask &= ~(1 << reg);
+ if ((inst >> 26) == 0x1b && hppa_extract_14 (inst) >= 0)
+ /* stwm with a positive displacement is a _post_
+ _modify_. */
+ cache->saved_regs[reg].addr = 0;
+ else if ((inst & 0xfc00000c) == 0x70000008)
+ /* A std has explicit post_modify forms. */
+ cache->saved_regs[reg].addr = 0;
+ else
+ {
+ CORE_ADDR offset;
+
+ if ((inst >> 26) == 0x1c)
+ offset = (inst & 0x1 ? -1 << 13 : 0) | (((inst >> 4) & 0x3ff) << 3);
+ else if ((inst >> 26) == 0x03)
+ offset = hppa_low_hppa_sign_extend (inst & 0x1f, 5);
+ else
+ offset = hppa_extract_14 (inst);
+
+ /* Handle code with and without frame pointers. */
+ if (u->Save_SP)
+ cache->saved_regs[reg].addr = offset;
+ else
+ cache->saved_regs[reg].addr = (u->Total_frame_size << 3) + offset;
+ }
+ }
- /* Note if we saved SP into the stack. This also happens to indicate
- the location of the saved frame pointer. */
- if ( (inst & 0xffffc000) == 0x6fc10000 /* stw,ma r1,N(sr0,sp) */
- || (inst & 0xffffc00c) == 0x73c10008) /* std,ma r1,N(sr0,sp) */
- {
- frame_saved_regs[DEPRECATED_FP_REGNUM] = get_frame_base (frame_info);
- save_sp = 0;
- }
+ /* GCC handles callee saved FP regs a little differently.
+
+ It emits an instruction to put the value of the start of
+ the FP store area into %r1. It then uses fstds,ma with a
+ basereg of %r1 for the stores.
- /* Account for general and floating-point register saves. */
- reg = inst_saves_gr (inst);
- if (reg >= 3 && reg <= 18
- && (!u->Save_SP || reg != DEPRECATED_FP_REGNUM))
- {
- save_gr &= ~(1 << reg);
-
- /* stwm with a positive displacement is a *post modify*. */
- if ((inst >> 26) == 0x1b
- && extract_14 (inst) >= 0)
- frame_saved_regs[reg] = get_frame_base (frame_info);
- /* A std has explicit post_modify forms. */
- else if ((inst & 0xfc00000c0) == 0x70000008)
- frame_saved_regs[reg] = get_frame_base (frame_info);
- else
- {
- CORE_ADDR offset;
+ HP CC emits them at the current stack pointer modifying the
+ stack pointer as it stores each register. */
+
+ /* ldo X(%r3),%r1 or ldo X(%r30),%r1. */
+ if ((inst & 0xffffc000) == 0x34610000
+ || (inst & 0xffffc000) == 0x37c10000)
+ fp_loc = hppa_extract_14 (inst);
+
+ reg = inst_saves_fr (inst);
+ if (reg >= 12 && reg <= 21)
+ {
+ /* Note +4 braindamage below is necessary because the FP
+ status registers are internally 8 registers rather than
+ the expected 4 registers. */
+ saved_fr_mask &= ~(1 << reg);
+ if (fp_loc == -1)
+ {
+ /* 1st HP CC FP register store. After this
+ instruction we've set enough state that the GCC and
+ HPCC code are both handled in the same manner. */
+ cache->saved_regs[reg + HPPA_FP4_REGNUM + 4].addr = 0;
+ fp_loc = 8;
+ }
+ else
+ {
+ cache->saved_regs[reg + HPPA_FP0_REGNUM + 4].addr = fp_loc;
+ fp_loc += 8;
+ }
+ }
+
+ /* Quit if we hit any kind of branch the previous iteration. */
+ if (final_iteration)
+ break;
+ /* We want to look precisely one instruction beyond the branch
+ if we have not found everything yet. */
+ if (is_branch (inst))
+ final_iteration = 1;
+ }
+ }
- if ((inst >> 26) == 0x1c)
- offset = (inst & 0x1 ? -1 << 13 : 0) | (((inst >> 4) & 0x3ff) << 3);
- else if ((inst >> 26) == 0x03)
- offset = low_sign_extend (inst & 0x1f, 5);
- else
- offset = extract_14 (inst);
+ {
+ /* The frame base always represents the value of %sp at entry to
+ the current function (and is thus equivalent to the "saved"
+ stack pointer. */
+ CORE_ADDR this_sp = frame_unwind_register_unsigned (next_frame, HPPA_SP_REGNUM);
+ CORE_ADDR fp;
+
+ if (hppa_debug)
+ fprintf_unfiltered (gdb_stdlog, " (this_sp=0x%s, pc=0x%s, "
+ "prologue_end=0x%s) ",
+ paddr_nz (this_sp),
+ paddr_nz (frame_pc_unwind (next_frame)),
+ paddr_nz (prologue_end));
+
+ /* Check to see if a frame pointer is available, and use it for
+ frame unwinding if it is.
+
+ There are some situations where we need to rely on the frame
+ pointer to do stack unwinding. For example, if a function calls
+ alloca (), the stack pointer can get adjusted inside the body of
+ the function. In this case, the ABI requires that the compiler
+ maintain a frame pointer for the function.
+
+ The unwind record has a flag (alloca_frame) that indicates that
+ a function has a variable frame; unfortunately, gcc/binutils
+ does not set this flag. Instead, whenever a frame pointer is used
+ and saved on the stack, the Save_SP flag is set. We use this to
+ decide whether to use the frame pointer for unwinding.
+
+ TODO: For the HP compiler, maybe we should use the alloca_frame flag
+ instead of Save_SP. */
+
+ fp = frame_unwind_register_unsigned (next_frame, HPPA_FP_REGNUM);
+
+ if (frame_pc_unwind (next_frame) >= prologue_end
+ && u->Save_SP && fp != 0)
+ {
+ cache->base = fp;
+
+ if (hppa_debug)
+ fprintf_unfiltered (gdb_stdlog, " (base=0x%s) [frame pointer] }",
+ paddr_nz (cache->base));
+ }
+ else if (u->Save_SP
+ && trad_frame_addr_p (cache->saved_regs, HPPA_SP_REGNUM))
+ {
+ /* Both we're expecting the SP to be saved and the SP has been
+ saved. The entry SP value is saved at this frame's SP
+ address. */
+ cache->base = read_memory_integer (this_sp, TARGET_PTR_BIT / 8);
+
+ if (hppa_debug)
+ fprintf_unfiltered (gdb_stdlog, " (base=0x%s) [saved] }",
+ paddr_nz (cache->base));
+ }
+ else
+ {
+ /* The prologue has been slowly allocating stack space. Adjust
+ the SP back. */
+ cache->base = this_sp - frame_size;
+ if (hppa_debug)
+ fprintf_unfiltered (gdb_stdlog, " (base=0x%s) [unwind adjust] } ",
+ paddr_nz (cache->base));
- /* Handle code with and without frame pointers. */
- if (u->Save_SP)
- frame_saved_regs[reg]
- = get_frame_base (frame_info) + offset;
- else
- frame_saved_regs[reg]
- = (get_frame_base (frame_info) + (u->Total_frame_size << 3)
- + offset);
- }
- }
+ }
+ trad_frame_set_value (cache->saved_regs, HPPA_SP_REGNUM, cache->base);
+ }
+ /* The PC is found in the "return register", "Millicode" uses "r31"
+ as the return register while normal code uses "rp". */
+ if (u->Millicode)
+ {
+ if (trad_frame_addr_p (cache->saved_regs, 31))
+ cache->saved_regs[HPPA_PCOQ_HEAD_REGNUM] = cache->saved_regs[31];
+ else
+ {
+ ULONGEST r31 = frame_unwind_register_unsigned (next_frame, 31);
+ trad_frame_set_value (cache->saved_regs, HPPA_PCOQ_HEAD_REGNUM, r31);
+ }
+ }
+ else
+ {
+ if (trad_frame_addr_p (cache->saved_regs, HPPA_RP_REGNUM))
+ cache->saved_regs[HPPA_PCOQ_HEAD_REGNUM] = cache->saved_regs[HPPA_RP_REGNUM];
+ else
+ {
+ ULONGEST rp = frame_unwind_register_unsigned (next_frame, HPPA_RP_REGNUM);
+ trad_frame_set_value (cache->saved_regs, HPPA_PCOQ_HEAD_REGNUM, rp);
+ }
+ }
- /* GCC handles callee saved FP regs a little differently.
+ /* If Save_SP is set, then we expect the frame pointer to be saved in the
+ frame. However, there is a one-insn window where we haven't saved it
+ yet, but we've already clobbered it. Detect this case and fix it up.
- It emits an instruction to put the value of the start of
- the FP store area into %r1. It then uses fstds,ma with
- a basereg of %r1 for the stores.
+ The prologue sequence for frame-pointer functions is:
+ 0: stw %rp, -20(%sp)
+ 4: copy %r3, %r1
+ 8: copy %sp, %r3
+ c: stw,ma %r1, XX(%sp)
- HP CC emits them at the current stack pointer modifying
- the stack pointer as it stores each register. */
+ So if we are at offset c, the r3 value that we want is not yet saved
+ on the stack, but it's been overwritten. The prologue analyzer will
+ set fp_in_r1 when it sees the copy insn so we know to get the value
+ from r1 instead. */
+ if (u->Save_SP && !trad_frame_addr_p (cache->saved_regs, HPPA_FP_REGNUM)
+ && fp_in_r1)
+ {
+ ULONGEST r1 = frame_unwind_register_unsigned (next_frame, 1);
+ trad_frame_set_value (cache->saved_regs, HPPA_FP_REGNUM, r1);
+ }
- /* ldo X(%r3),%r1 or ldo X(%r30),%r1. */
- if ((inst & 0xffffc000) == 0x34610000
- || (inst & 0xffffc000) == 0x37c10000)
- fp_loc = extract_14 (inst);
+ {
+ /* Convert all the offsets into addresses. */
+ int reg;
+ for (reg = 0; reg < NUM_REGS; reg++)
+ {
+ if (trad_frame_addr_p (cache->saved_regs, reg))
+ cache->saved_regs[reg].addr += cache->base;
+ }
+ }
- reg = inst_saves_fr (inst);
- if (reg >= 12 && reg <= 21)
- {
- /* Note +4 braindamage below is necessary because the FP status
- registers are internally 8 registers rather than the expected
- 4 registers. */
- save_fr &= ~(1 << reg);
- if (fp_loc == -1)
- {
- /* 1st HP CC FP register store. After this instruction
- we've set enough state that the GCC and HPCC code are
- both handled in the same manner. */
- frame_saved_regs[reg + FP4_REGNUM + 4] = get_frame_base (frame_info);
- fp_loc = 8;
- }
- else
- {
- frame_saved_regs[reg + FP0_REGNUM + 4]
- = get_frame_base (frame_info) + fp_loc;
- fp_loc += 8;
- }
- }
+ {
+ struct gdbarch *gdbarch;
+ struct gdbarch_tdep *tdep;
- /* Quit if we hit any kind of branch the previous iteration. */
- if (final_iteration)
- break;
+ gdbarch = get_frame_arch (next_frame);
+ tdep = gdbarch_tdep (gdbarch);
- /* We want to look precisely one instruction beyond the branch
- if we have not found everything yet. */
- if (is_branch (inst))
- final_iteration = 1;
+ if (tdep->unwind_adjust_stub)
+ {
+ tdep->unwind_adjust_stub (next_frame, cache->base, cache->saved_regs);
+ }
+ }
- /* Bump the PC. */
- pc += 4;
- }
+ if (hppa_debug)
+ fprintf_unfiltered (gdb_stdlog, "base=0x%s }",
+ paddr_nz (((struct hppa_frame_cache *)*this_cache)->base));
+ return (*this_cache);
}
-/* XXX - deprecated. This is a compatibility function for targets
- that do not yet implement DEPRECATED_FRAME_INIT_SAVED_REGS. */
-/* Find the addresses in which registers are saved in FRAME. */
+static void
+hppa_frame_this_id (struct frame_info *next_frame, void **this_cache,
+ struct frame_id *this_id)
+{
+ struct hppa_frame_cache *info;
+ CORE_ADDR pc = frame_pc_unwind (next_frame);
+ struct unwind_table_entry *u;
+
+ info = hppa_frame_cache (next_frame, this_cache);
+ u = find_unwind_entry (pc);
-void
-hppa_frame_init_saved_regs (struct frame_info *frame)
+ (*this_id) = frame_id_build (info->base, u->region_start);
+}
+
+static void
+hppa_frame_prev_register (struct frame_info *next_frame,
+ void **this_cache,
+ int regnum, int *optimizedp,
+ enum lval_type *lvalp, CORE_ADDR *addrp,
+ int *realnump, void *valuep)
{
- if (deprecated_get_frame_saved_regs (frame) == NULL)
- frame_saved_regs_zalloc (frame);
- hppa_frame_find_saved_regs (frame, deprecated_get_frame_saved_regs (frame));
+ struct hppa_frame_cache *info = hppa_frame_cache (next_frame, this_cache);
+ hppa_frame_prev_register_helper (next_frame, info->saved_regs, regnum,
+ optimizedp, lvalp, addrp, realnump, valuep);
}
-/* Exception handling support for the HP-UX ANSI C++ compiler.
- The compiler (aCC) provides a callback for exception events;
- GDB can set a breakpoint on this callback and find out what
- exception event has occurred. */
-
-/* The name of the hook to be set to point to the callback function */
-static char HP_ACC_EH_notify_hook[] = "__eh_notify_hook";
-/* The name of the function to be used to set the hook value */
-static char HP_ACC_EH_set_hook_value[] = "__eh_set_hook_value";
-/* The name of the callback function in end.o */
-static char HP_ACC_EH_notify_callback[] = "__d_eh_notify_callback";
-/* Name of function in end.o on which a break is set (called by above) */
-static char HP_ACC_EH_break[] = "__d_eh_break";
-/* Name of flag (in end.o) that enables catching throws */
-static char HP_ACC_EH_catch_throw[] = "__d_eh_catch_throw";
-/* Name of flag (in end.o) that enables catching catching */
-static char HP_ACC_EH_catch_catch[] = "__d_eh_catch_catch";
-/* The enum used by aCC */
-typedef enum
- {
- __EH_NOTIFY_THROW,
- __EH_NOTIFY_CATCH
- }
-__eh_notification;
-
-/* Is exception-handling support available with this executable? */
-static int hp_cxx_exception_support = 0;
-/* Has the initialize function been run? */
-int hp_cxx_exception_support_initialized = 0;
-/* Similar to above, but imported from breakpoint.c -- non-target-specific */
-extern int exception_support_initialized;
-/* Address of __eh_notify_hook */
-static CORE_ADDR eh_notify_hook_addr = 0;
-/* Address of __d_eh_notify_callback */
-static CORE_ADDR eh_notify_callback_addr = 0;
-/* Address of __d_eh_break */
-static CORE_ADDR eh_break_addr = 0;
-/* Address of __d_eh_catch_catch */
-static CORE_ADDR eh_catch_catch_addr = 0;
-/* Address of __d_eh_catch_throw */
-static CORE_ADDR eh_catch_throw_addr = 0;
-/* Sal for __d_eh_break */
-static struct symtab_and_line *break_callback_sal = 0;
-
-/* Code in end.c expects __d_pid to be set in the inferior,
- otherwise __d_eh_notify_callback doesn't bother to call
- __d_eh_break! So we poke the pid into this symbol
- ourselves.
- 0 => success
- 1 => failure */
-int
-setup_d_pid_in_inferior (void)
+static const struct frame_unwind hppa_frame_unwind =
{
- CORE_ADDR anaddr;
- struct minimal_symbol *msymbol;
- char buf[4]; /* FIXME 32x64? */
+ NORMAL_FRAME,
+ hppa_frame_this_id,
+ hppa_frame_prev_register
+};
- /* Slam the pid of the process into __d_pid; failing is only a warning! */
- msymbol = lookup_minimal_symbol ("__d_pid", NULL, symfile_objfile);
- if (msymbol == NULL)
- {
- warning ("Unable to find __d_pid symbol in object file.");
- warning ("Suggest linking executable with -g (links in /opt/langtools/lib/end.o).");
- return 1;
- }
+static const struct frame_unwind *
+hppa_frame_unwind_sniffer (struct frame_info *next_frame)
+{
+ CORE_ADDR pc = frame_pc_unwind (next_frame);
- anaddr = SYMBOL_VALUE_ADDRESS (msymbol);
- store_unsigned_integer (buf, 4, PIDGET (inferior_ptid)); /* FIXME 32x64? */
- if (target_write_memory (anaddr, buf, 4)) /* FIXME 32x64? */
- {
- warning ("Unable to write __d_pid");
- warning ("Suggest linking executable with -g (links in /opt/langtools/lib/end.o).");
- return 1;
- }
- return 0;
-}
+ if (find_unwind_entry (pc))
+ return &hppa_frame_unwind;
-/* Initialize exception catchpoint support by looking for the
- necessary hooks/callbacks in end.o, etc., and set the hook value to
- point to the required debug function
+ return NULL;
+}
- Return 0 => failure
- 1 => success */
+/* This is a generic fallback frame unwinder that kicks in if we fail all
+ the other ones. Normally we would expect the stub and regular unwinder
+ to work, but in some cases we might hit a function that just doesn't
+ have any unwind information available. In this case we try to do
+ unwinding solely based on code reading. This is obviously going to be
+ slow, so only use this as a last resort. Currently this will only
+ identify the stack and pc for the frame. */
-static int
-initialize_hp_cxx_exception_support (void)
+static struct hppa_frame_cache *
+hppa_fallback_frame_cache (struct frame_info *next_frame, void **this_cache)
{
- struct symtabs_and_lines sals;
- struct cleanup *old_chain;
- struct cleanup *canonical_strings_chain = NULL;
- int i;
- char *addr_start;
- char *addr_end = NULL;
- char **canonical = (char **) NULL;
- int thread = -1;
- struct symbol *sym = NULL;
- struct minimal_symbol *msym = NULL;
- struct objfile *objfile;
- asection *shlib_info;
+ struct hppa_frame_cache *cache;
+ unsigned int frame_size;
+ int found_rp;
+ CORE_ADDR pc, start_pc, end_pc, cur_pc;
- /* Detect and disallow recursion. On HP-UX with aCC, infinite
- recursion is a possibility because finding the hook for exception
- callbacks involves making a call in the inferior, which means
- re-inserting breakpoints which can re-invoke this code */
+ if (hppa_debug)
+ fprintf_unfiltered (gdb_stdlog, "{ hppa_fallback_frame_cache (frame=%d)-> ",
+ frame_relative_level(next_frame));
- static int recurse = 0;
- if (recurse > 0)
- {
- hp_cxx_exception_support_initialized = 0;
- exception_support_initialized = 0;
- return 0;
- }
+ cache = FRAME_OBSTACK_ZALLOC (struct hppa_frame_cache);
+ (*this_cache) = cache;
+ cache->saved_regs = trad_frame_alloc_saved_regs (next_frame);
- hp_cxx_exception_support = 0;
+ pc = frame_func_unwind (next_frame);
+ cur_pc = frame_pc_unwind (next_frame);
+ frame_size = 0;
+ found_rp = 0;
- /* First check if we have seen any HP compiled objects; if not,
- it is very unlikely that HP's idiosyncratic callback mechanism
- for exception handling debug support will be available!
- This will percolate back up to breakpoint.c, where our callers
- will decide to try the g++ exception-handling support instead. */
- if (!hp_som_som_object_present)
- return 0;
+ find_pc_partial_function (pc, NULL, &start_pc, &end_pc);
- /* We have a SOM executable with SOM debug info; find the hooks */
-
- /* First look for the notify hook provided by aCC runtime libs */
- /* If we find this symbol, we conclude that the executable must
- have HP aCC exception support built in. If this symbol is not
- found, even though we're a HP SOM-SOM file, we may have been
- built with some other compiler (not aCC). This results percolates
- back up to our callers in breakpoint.c which can decide to
- try the g++ style of exception support instead.
- If this symbol is found but the other symbols we require are
- not found, there is something weird going on, and g++ support
- should *not* be tried as an alternative.
-
- ASSUMPTION: Only HP aCC code will have __eh_notify_hook defined.
- ASSUMPTION: HP aCC and g++ modules cannot be linked together. */
-
- /* libCsup has this hook; it'll usually be non-debuggable */
- msym = lookup_minimal_symbol (HP_ACC_EH_notify_hook, NULL, NULL);
- if (msym)
+ if (start_pc == 0 || end_pc == 0)
{
- eh_notify_hook_addr = SYMBOL_VALUE_ADDRESS (msym);
- hp_cxx_exception_support = 1;
+ error ("Cannot find bounds of current function (@0x%s), unwinding will "
+ "fail.", paddr_nz (pc));
+ return cache;
}
- else
+
+ if (end_pc > cur_pc)
+ end_pc = cur_pc;
+
+ for (pc = start_pc; pc < end_pc; pc += 4)
{
- warning ("Unable to find exception callback hook (%s).", HP_ACC_EH_notify_hook);
- warning ("Executable may not have been compiled debuggable with HP aCC.");
- warning ("GDB will be unable to intercept exception events.");
- eh_notify_hook_addr = 0;
- hp_cxx_exception_support = 0;
- return 0;
+ unsigned int insn;
+
+ insn = read_memory_unsigned_integer (pc, 4);
+
+ frame_size += prologue_inst_adjust_sp (insn);
+
+ /* There are limited ways to store the return pointer into the
+ stack. */
+ if (insn == 0x6bc23fd9) /* stw rp,-0x14(sr0,sp) */
+ {
+ cache->saved_regs[HPPA_RP_REGNUM].addr = -20;
+ found_rp = 1;
+ }
+ else if (insn == 0x0fc212c1) /* std rp,-0x10(sr0,sp) */
+ {
+ cache->saved_regs[HPPA_RP_REGNUM].addr = -16;
+ found_rp = 1;
+ }
}
- /* Next look for the notify callback routine in end.o */
- /* This is always available in the SOM symbol dictionary if end.o is linked in */
- msym = lookup_minimal_symbol (HP_ACC_EH_notify_callback, NULL, NULL);
- if (msym)
+ if (hppa_debug)
+ fprintf_unfiltered (gdb_stdlog, " frame_size = %d, found_rp = %d }\n",
+ frame_size, found_rp);
+
+ cache->base = frame_unwind_register_unsigned (next_frame, HPPA_SP_REGNUM) - frame_size;
+ trad_frame_set_value (cache->saved_regs, HPPA_SP_REGNUM, cache->base);
+
+ if (trad_frame_addr_p (cache->saved_regs, HPPA_RP_REGNUM))
{
- eh_notify_callback_addr = SYMBOL_VALUE_ADDRESS (msym);
- hp_cxx_exception_support = 1;
+ cache->saved_regs[HPPA_RP_REGNUM].addr += cache->base;
+ cache->saved_regs[HPPA_PCOQ_HEAD_REGNUM] = cache->saved_regs[HPPA_RP_REGNUM];
}
else
{
- warning ("Unable to find exception callback routine (%s).", HP_ACC_EH_notify_callback);
- warning ("Suggest linking executable with -g (links in /opt/langtools/lib/end.o).");
- warning ("GDB will be unable to intercept exception events.");
- eh_notify_callback_addr = 0;
- return 0;
+ ULONGEST rp = frame_unwind_register_unsigned (next_frame, HPPA_RP_REGNUM);
+ trad_frame_set_value (cache->saved_regs, HPPA_PCOQ_HEAD_REGNUM, rp);
}
-#ifndef GDB_TARGET_IS_HPPA_20W
- /* Check whether the executable is dynamically linked or archive bound */
- /* With an archive-bound executable we can use the raw addresses we find
- for the callback function, etc. without modification. For an executable
- with shared libraries, we have to do more work to find the plabel, which
- can be the target of a call through $$dyncall from the aCC runtime support
- library (libCsup) which is linked shared by default by aCC. */
- /* This test below was copied from somsolib.c/somread.c. It may not be a very
- reliable one to test that an executable is linked shared. pai/1997-07-18 */
- shlib_info = bfd_get_section_by_name (symfile_objfile->obfd, "$SHLIB_INFO$");
- if (shlib_info && (bfd_section_size (symfile_objfile->obfd, shlib_info) != 0))
- {
- /* The minsym we have has the local code address, but that's not the
- plabel that can be used by an inter-load-module call. */
- /* Find solib handle for main image (which has end.o), and use that
- and the min sym as arguments to __d_shl_get() (which does the equivalent
- of shl_findsym()) to find the plabel. */
+ return cache;
+}
- args_for_find_stub args;
- static char message[] = "Error while finding exception callback hook:\n";
+static void
+hppa_fallback_frame_this_id (struct frame_info *next_frame, void **this_cache,
+ struct frame_id *this_id)
+{
+ struct hppa_frame_cache *info =
+ hppa_fallback_frame_cache (next_frame, this_cache);
+ (*this_id) = frame_id_build (info->base, frame_func_unwind (next_frame));
+}
- args.solib_handle = som_solib_get_solib_by_pc (eh_notify_callback_addr);
- args.msym = msym;
- args.return_val = 0;
+static void
+hppa_fallback_frame_prev_register (struct frame_info *next_frame,
+ void **this_cache,
+ int regnum, int *optimizedp,
+ enum lval_type *lvalp, CORE_ADDR *addrp,
+ int *realnump, void *valuep)
+{
+ struct hppa_frame_cache *info =
+ hppa_fallback_frame_cache (next_frame, this_cache);
+ hppa_frame_prev_register_helper (next_frame, info->saved_regs, regnum,
+ optimizedp, lvalp, addrp, realnump, valuep);
+}
- recurse++;
- catch_errors (cover_find_stub_with_shl_get, &args, message,
- RETURN_MASK_ALL);
- eh_notify_callback_addr = args.return_val;
- recurse--;
+static const struct frame_unwind hppa_fallback_frame_unwind =
+{
+ NORMAL_FRAME,
+ hppa_fallback_frame_this_id,
+ hppa_fallback_frame_prev_register
+};
- exception_catchpoints_are_fragile = 1;
+static const struct frame_unwind *
+hppa_fallback_unwind_sniffer (struct frame_info *next_frame)
+{
+ return &hppa_fallback_frame_unwind;
+}
- if (!eh_notify_callback_addr)
- {
- /* We can get here either if there is no plabel in the export list
- for the main image, or if something strange happened (?) */
- warning ("Couldn't find a plabel (indirect function label) for the exception callback.");
- warning ("GDB will not be able to intercept exception events.");
- return 0;
- }
- }
- else
- exception_catchpoints_are_fragile = 0;
-#endif
+/* Stub frames, used for all kinds of call stubs. */
+struct hppa_stub_unwind_cache
+{
+ CORE_ADDR base;
+ struct trad_frame_saved_reg *saved_regs;
+};
- /* Now, look for the breakpointable routine in end.o */
- /* This should also be available in the SOM symbol dict. if end.o linked in */
- msym = lookup_minimal_symbol (HP_ACC_EH_break, NULL, NULL);
- if (msym)
- {
- eh_break_addr = SYMBOL_VALUE_ADDRESS (msym);
- hp_cxx_exception_support = 1;
- }
- else
- {
- warning ("Unable to find exception callback routine to set breakpoint (%s).", HP_ACC_EH_break);
- warning ("Suggest linking executable with -g (link in /opt/langtools/lib/end.o).");
- warning ("GDB will be unable to intercept exception events.");
- eh_break_addr = 0;
- return 0;
- }
+static struct hppa_stub_unwind_cache *
+hppa_stub_frame_unwind_cache (struct frame_info *next_frame,
+ void **this_cache)
+{
+ struct gdbarch *gdbarch = get_frame_arch (next_frame);
+ struct hppa_stub_unwind_cache *info;
+ struct unwind_table_entry *u;
- /* Next look for the catch enable flag provided in end.o */
- sym = lookup_symbol (HP_ACC_EH_catch_catch, (struct block *) NULL,
- VAR_DOMAIN, 0, (struct symtab **) NULL);
- if (sym) /* sometimes present in debug info */
- {
- eh_catch_catch_addr = SYMBOL_VALUE_ADDRESS (sym);
- hp_cxx_exception_support = 1;
- }
- else
- /* otherwise look in SOM symbol dict. */
- {
- msym = lookup_minimal_symbol (HP_ACC_EH_catch_catch, NULL, NULL);
- if (msym)
- {
- eh_catch_catch_addr = SYMBOL_VALUE_ADDRESS (msym);
- hp_cxx_exception_support = 1;
- }
- else
- {
- warning ("Unable to enable interception of exception catches.");
- warning ("Executable may not have been compiled debuggable with HP aCC.");
- warning ("Suggest linking executable with -g (link in /opt/langtools/lib/end.o).");
- return 0;
- }
- }
+ if (*this_cache)
+ return *this_cache;
- /* Next look for the catch enable flag provided end.o */
- sym = lookup_symbol (HP_ACC_EH_catch_catch, (struct block *) NULL,
- VAR_DOMAIN, 0, (struct symtab **) NULL);
- if (sym) /* sometimes present in debug info */
- {
- eh_catch_throw_addr = SYMBOL_VALUE_ADDRESS (sym);
- hp_cxx_exception_support = 1;
- }
- else
- /* otherwise look in SOM symbol dict. */
+ info = FRAME_OBSTACK_ZALLOC (struct hppa_stub_unwind_cache);
+ *this_cache = info;
+ info->saved_regs = trad_frame_alloc_saved_regs (next_frame);
+
+ info->base = frame_unwind_register_unsigned (next_frame, HPPA_SP_REGNUM);
+
+ if (gdbarch_osabi (gdbarch) == GDB_OSABI_HPUX_SOM)
{
- msym = lookup_minimal_symbol (HP_ACC_EH_catch_throw, NULL, NULL);
- if (msym)
- {
- eh_catch_throw_addr = SYMBOL_VALUE_ADDRESS (msym);
- hp_cxx_exception_support = 1;
- }
- else
+ /* HPUX uses export stubs in function calls; the export stub clobbers
+ the return value of the caller, and, later restores it from the
+ stack. */
+ u = find_unwind_entry (frame_pc_unwind (next_frame));
+
+ if (u && u->stub_unwind.stub_type == EXPORT)
{
- warning ("Unable to enable interception of exception throws.");
- warning ("Executable may not have been compiled debuggable with HP aCC.");
- warning ("Suggest linking executable with -g (link in /opt/langtools/lib/end.o).");
- return 0;
+ info->saved_regs[HPPA_PCOQ_HEAD_REGNUM].addr = info->base - 24;
+
+ return info;
}
}
- /* Set the flags */
- hp_cxx_exception_support = 2; /* everything worked so far */
- hp_cxx_exception_support_initialized = 1;
- exception_support_initialized = 1;
+ /* By default we assume that stubs do not change the rp. */
+ info->saved_regs[HPPA_PCOQ_HEAD_REGNUM].realreg = HPPA_RP_REGNUM;
- return 1;
+ return info;
}
-/* Target operation for enabling or disabling interception of
- exception events.
- KIND is either EX_EVENT_THROW or EX_EVENT_CATCH
- ENABLE is either 0 (disable) or 1 (enable).
- Return value is NULL if no support found;
- -1 if something went wrong,
- or a pointer to a symtab/line struct if the breakpointable
- address was found. */
-
-struct symtab_and_line *
-child_enable_exception_callback (enum exception_event_kind kind, int enable)
+static void
+hppa_stub_frame_this_id (struct frame_info *next_frame,
+ void **this_prologue_cache,
+ struct frame_id *this_id)
{
- char buf[4];
+ struct hppa_stub_unwind_cache *info
+ = hppa_stub_frame_unwind_cache (next_frame, this_prologue_cache);
- if (!exception_support_initialized || !hp_cxx_exception_support_initialized)
- if (!initialize_hp_cxx_exception_support ())
- return NULL;
+ if (info)
+ *this_id = frame_id_build (info->base, frame_func_unwind (next_frame));
+ else
+ *this_id = null_frame_id;
+}
- switch (hp_cxx_exception_support)
- {
- case 0:
- /* Assuming no HP support at all */
- return NULL;
- case 1:
- /* HP support should be present, but something went wrong */
- return (struct symtab_and_line *) -1; /* yuck! */
- /* there may be other cases in the future */
- }
+static void
+hppa_stub_frame_prev_register (struct frame_info *next_frame,
+ void **this_prologue_cache,
+ int regnum, int *optimizedp,
+ enum lval_type *lvalp, CORE_ADDR *addrp,
+ int *realnump, void *valuep)
+{
+ struct hppa_stub_unwind_cache *info
+ = hppa_stub_frame_unwind_cache (next_frame, this_prologue_cache);
+
+ if (info)
+ hppa_frame_prev_register_helper (next_frame, info->saved_regs, regnum,
+ optimizedp, lvalp, addrp, realnump,
+ valuep);
+ else
+ error ("Requesting registers from null frame.\n");
+}
- /* Set the EH hook to point to the callback routine */
- store_unsigned_integer (buf, 4, enable ? eh_notify_callback_addr : 0); /* FIXME 32x64 problem */
- /* pai: (temp) FIXME should there be a pack operation first? */
- if (target_write_memory (eh_notify_hook_addr, buf, 4)) /* FIXME 32x64 problem */
- {
- warning ("Could not write to target memory for exception event callback.");
- warning ("Interception of exception events may not work.");
- return (struct symtab_and_line *) -1;
- }
- if (enable)
- {
- /* Ensure that __d_pid is set up correctly -- end.c code checks this. :-( */
- if (PIDGET (inferior_ptid) > 0)
- {
- if (setup_d_pid_in_inferior ())
- return (struct symtab_and_line *) -1;
- }
- else
- {
- warning ("Internal error: Invalid inferior pid? Cannot intercept exception events.");
- return (struct symtab_and_line *) -1;
- }
- }
+static const struct frame_unwind hppa_stub_frame_unwind = {
+ NORMAL_FRAME,
+ hppa_stub_frame_this_id,
+ hppa_stub_frame_prev_register
+};
- switch (kind)
- {
- case EX_EVENT_THROW:
- store_unsigned_integer (buf, 4, enable ? 1 : 0);
- if (target_write_memory (eh_catch_throw_addr, buf, 4)) /* FIXME 32x64? */
- {
- warning ("Couldn't enable exception throw interception.");
- return (struct symtab_and_line *) -1;
- }
- break;
- case EX_EVENT_CATCH:
- store_unsigned_integer (buf, 4, enable ? 1 : 0);
- if (target_write_memory (eh_catch_catch_addr, buf, 4)) /* FIXME 32x64? */
- {
- warning ("Couldn't enable exception catch interception.");
- return (struct symtab_and_line *) -1;
- }
- break;
- default:
- error ("Request to enable unknown or unsupported exception event.");
- }
+static const struct frame_unwind *
+hppa_stub_unwind_sniffer (struct frame_info *next_frame)
+{
+ CORE_ADDR pc = frame_pc_unwind (next_frame);
+ struct gdbarch *gdbarch = get_frame_arch (next_frame);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
- /* Copy break address into new sal struct, malloc'ing if needed. */
- if (!break_callback_sal)
- {
- break_callback_sal = (struct symtab_and_line *) xmalloc (sizeof (struct symtab_and_line));
- }
- init_sal (break_callback_sal);
- break_callback_sal->symtab = NULL;
- break_callback_sal->pc = eh_break_addr;
- break_callback_sal->line = 0;
- break_callback_sal->end = eh_break_addr;
+ if (pc == 0
+ || (tdep->in_solib_call_trampoline != NULL
+ && tdep->in_solib_call_trampoline (pc, NULL))
+ || IN_SOLIB_RETURN_TRAMPOLINE (pc, NULL))
+ return &hppa_stub_frame_unwind;
+ return NULL;
+}
+
+static struct frame_id
+hppa_unwind_dummy_id (struct gdbarch *gdbarch, struct frame_info *next_frame)
+{
+ return frame_id_build (frame_unwind_register_unsigned (next_frame,
+ HPPA_SP_REGNUM),
+ frame_pc_unwind (next_frame));
+}
+
+CORE_ADDR
+hppa_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)
+{
+ ULONGEST ipsw;
+ CORE_ADDR pc;
+
+ ipsw = frame_unwind_register_unsigned (next_frame, HPPA_IPSW_REGNUM);
+ pc = frame_unwind_register_unsigned (next_frame, HPPA_PCOQ_HEAD_REGNUM);
- return break_callback_sal;
+ /* If the current instruction is nullified, then we are effectively
+ still executing the previous instruction. Pretend we are still
+ there. This is needed when single stepping; if the nullified
+ instruction is on a different line, we don't want GDB to think
+ we've stepped onto that line. */
+ if (ipsw & 0x00200000)
+ pc -= 4;
+
+ return pc & ~0x3;
}
-/* Record some information about the current exception event */
-static struct exception_event_record current_ex_event;
-/* Convenience struct */
-static struct symtab_and_line null_symtab_and_line =
-{NULL, 0, 0, 0};
-
-/* Report current exception event. Returns a pointer to a record
- that describes the kind of the event, where it was thrown from,
- and where it will be caught. More information may be reported
- in the future */
-struct exception_event_record *
-child_get_current_exception_event (void)
+/* Return the minimal symbol whose name is NAME and stub type is STUB_TYPE.
+ Return NULL if no such symbol was found. */
+
+struct minimal_symbol *
+hppa_lookup_stub_minimal_symbol (const char *name,
+ enum unwind_stub_types stub_type)
{
- CORE_ADDR event_kind;
- CORE_ADDR throw_addr;
- CORE_ADDR catch_addr;
- struct frame_info *fi, *curr_frame;
- int level = 1;
-
- curr_frame = get_current_frame ();
- if (!curr_frame)
- return (struct exception_event_record *) NULL;
-
- /* Go up one frame to __d_eh_notify_callback, because at the
- point when this code is executed, there's garbage in the
- arguments of __d_eh_break. */
- fi = find_relative_frame (curr_frame, &level);
- if (level != 0)
- return (struct exception_event_record *) NULL;
-
- select_frame (fi);
-
- /* Read in the arguments */
- /* __d_eh_notify_callback() is called with 3 arguments:
- 1. event kind catch or throw
- 2. the target address if known
- 3. a flag -- not sure what this is. pai/1997-07-17 */
- event_kind = read_register (ARG0_REGNUM);
- catch_addr = read_register (ARG1_REGNUM);
-
- /* Now go down to a user frame */
- /* For a throw, __d_eh_break is called by
- __d_eh_notify_callback which is called by
- __notify_throw which is called
- from user code.
- For a catch, __d_eh_break is called by
- __d_eh_notify_callback which is called by
- <stackwalking stuff> which is called by
- __throw__<stuff> or __rethrow_<stuff> which is called
- from user code. */
- /* FIXME: Don't use such magic numbers; search for the frames */
- level = (event_kind == EX_EVENT_THROW) ? 3 : 4;
- fi = find_relative_frame (curr_frame, &level);
- if (level != 0)
- return (struct exception_event_record *) NULL;
-
- select_frame (fi);
- throw_addr = get_frame_pc (fi);
-
- /* Go back to original (top) frame */
- select_frame (curr_frame);
-
- current_ex_event.kind = (enum exception_event_kind) event_kind;
- current_ex_event.throw_sal = find_pc_line (throw_addr, 1);
- current_ex_event.catch_sal = find_pc_line (catch_addr, 1);
-
- return ¤t_ex_event;
+ struct objfile *objfile;
+ struct minimal_symbol *msym;
+
+ ALL_MSYMBOLS (objfile, msym)
+ {
+ if (strcmp (SYMBOL_LINKAGE_NAME (msym), name) == 0)
+ {
+ struct unwind_table_entry *u;
+
+ u = find_unwind_entry (SYMBOL_VALUE (msym));
+ if (u != NULL && u->stub_unwind.stub_type == stub_type)
+ return msym;
+ }
+ }
+
+ return NULL;
}
/* Instead of this nasty cast, add a method pvoid() that prints out a
printf_unfiltered ("\tregion_start = ");
print_address (u->region_start, gdb_stdout);
+ gdb_flush (gdb_stdout);
printf_unfiltered ("\n\tregion_end = ");
print_address (u->region_end, gdb_stdout);
+ gdb_flush (gdb_stdout);
#define pif(FLD) if (u->FLD) printf_unfiltered (" "#FLD);
pin (Entry_FR);
pin (Entry_GR);
pin (Total_frame_size);
-}
-
-void
-hppa_skip_permanent_breakpoint (void)
-{
- /* To step over a breakpoint instruction on the PA takes some
- fiddling with the instruction address queue.
-
- When we stop at a breakpoint, the IA queue front (the instruction
- we're executing now) points at the breakpoint instruction, and
- the IA queue back (the next instruction to execute) points to
- whatever instruction we would execute after the breakpoint, if it
- were an ordinary instruction. This is the case even if the
- breakpoint is in the delay slot of a branch instruction.
-
- Clearly, to step past the breakpoint, we need to set the queue
- front to the back. But what do we put in the back? What
- instruction comes after that one? Because of the branch delay
- slot, the next insn is always at the back + 4. */
- write_register (PCOQ_HEAD_REGNUM, read_register (PCOQ_TAIL_REGNUM));
- write_register (PCSQ_HEAD_REGNUM, read_register (PCSQ_TAIL_REGNUM));
-
- write_register (PCOQ_TAIL_REGNUM, read_register (PCOQ_TAIL_REGNUM) + 4);
- /* We can leave the tail's space the same, since there's no jump. */
-}
-
-/* Copy the function value from VALBUF into the proper location
- for a function return.
-
- Called only in the context of the "return" command. */
-
-void
-hppa32_store_return_value (struct type *type, char *valbuf)
-{
- /* For software floating point, the return value goes into the
- integer registers. But we do not have any flag to key this on,
- so we always store the value into the integer registers.
-
- If its a float value, then we also store it into the floating
- point registers. */
- deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (28)
- + (TYPE_LENGTH (type) > 4
- ? (8 - TYPE_LENGTH (type))
- : (4 - TYPE_LENGTH (type))),
- valbuf, TYPE_LENGTH (type));
- if (TYPE_CODE (type) == TYPE_CODE_FLT)
- deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (FP4_REGNUM),
- valbuf, TYPE_LENGTH (type));
-}
-
-/* Same as hppa32_store_return_value(), but for the PA64 ABI. */
-
-void
-hppa64_store_return_value (struct type *type, char *valbuf)
-{
- if (TYPE_CODE (type) == TYPE_CODE_FLT)
- deprecated_write_register_bytes
- (DEPRECATED_REGISTER_BYTE (FP4_REGNUM)
- + DEPRECATED_REGISTER_SIZE - TYPE_LENGTH (type),
- valbuf, TYPE_LENGTH (type));
- else if (is_integral_type(type))
- deprecated_write_register_bytes
- (DEPRECATED_REGISTER_BYTE (28)
- + DEPRECATED_REGISTER_SIZE - TYPE_LENGTH (type),
- valbuf, TYPE_LENGTH (type));
- else if (TYPE_LENGTH (type) <= 8)
- deprecated_write_register_bytes
- (DEPRECATED_REGISTER_BYTE (28),valbuf, TYPE_LENGTH (type));
- else if (TYPE_LENGTH (type) <= 16)
- {
- deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (28),valbuf, 8);
- deprecated_write_register_bytes
- (DEPRECATED_REGISTER_BYTE (29), valbuf + 8, TYPE_LENGTH (type) - 8);
- }
-}
-
-/* Copy the function's return value into VALBUF.
-
- This function is called only in the context of "target function calls",
- ie. when the debugger forces a function to be called in the child, and
- when the debugger forces a fucntion to return prematurely via the
- "return" command. */
-
-void
-hppa32_extract_return_value (struct type *type, char *regbuf, char *valbuf)
-{
- if (TYPE_CODE (type) == TYPE_CODE_FLT)
- memcpy (valbuf, regbuf + DEPRECATED_REGISTER_BYTE (FP4_REGNUM), TYPE_LENGTH (type));
- else
- memcpy (valbuf,
- (regbuf
- + DEPRECATED_REGISTER_BYTE (28)
- + (TYPE_LENGTH (type) > 4
- ? (8 - TYPE_LENGTH (type))
- : (4 - TYPE_LENGTH (type)))),
- TYPE_LENGTH (type));
-}
-
-/* Same as hppa32_extract_return_value but for the PA64 ABI case. */
-void
-hppa64_extract_return_value (struct type *type, char *regbuf, char *valbuf)
-{
- /* RM: Floats are returned in FR4R, doubles in FR4.
- Integral values are in r28, padded on the left.
- Aggregates less that 65 bits are in r28, right padded.
- Aggregates upto 128 bits are in r28 and r29, right padded. */
- if (TYPE_CODE (type) == TYPE_CODE_FLT)
- memcpy (valbuf,
- regbuf + DEPRECATED_REGISTER_BYTE (FP4_REGNUM)
- + DEPRECATED_REGISTER_SIZE - TYPE_LENGTH (type),
- TYPE_LENGTH (type));
- else if (is_integral_type(type))
- memcpy (valbuf,
- regbuf + DEPRECATED_REGISTER_BYTE (28)
- + DEPRECATED_REGISTER_SIZE - TYPE_LENGTH (type),
- TYPE_LENGTH (type));
- else if (TYPE_LENGTH (type) <= 8)
- memcpy (valbuf, regbuf + DEPRECATED_REGISTER_BYTE (28),
- TYPE_LENGTH (type));
- else if (TYPE_LENGTH (type) <= 16)
+ if (u->stub_unwind.stub_type)
{
- memcpy (valbuf, regbuf + DEPRECATED_REGISTER_BYTE (28), 8);
- memcpy (valbuf + 8, regbuf + DEPRECATED_REGISTER_BYTE (29),
- TYPE_LENGTH (type) - 8);
+ printf_unfiltered ("\tstub type = ");
+ switch (u->stub_unwind.stub_type)
+ {
+ case LONG_BRANCH:
+ printf_unfiltered ("long branch\n");
+ break;
+ case PARAMETER_RELOCATION:
+ printf_unfiltered ("parameter relocation\n");
+ break;
+ case EXPORT:
+ printf_unfiltered ("export\n");
+ break;
+ case IMPORT:
+ printf_unfiltered ("import\n");
+ break;
+ case IMPORT_SHLIB:
+ printf_unfiltered ("import shlib\n");
+ break;
+ default:
+ printf_unfiltered ("unknown (%d)\n", u->stub_unwind.stub_type);
+ }
}
}
-int
-hppa_reg_struct_has_addr (int gcc_p, struct type *type)
-{
- /* On the PA, any pass-by-value structure > 8 bytes is actually passed
- via a pointer regardless of its type or the compiler used. */
- return (TYPE_LENGTH (type) > 8);
-}
-
-int
-hppa_inner_than (CORE_ADDR lhs, CORE_ADDR rhs)
-{
- /* Stack grows upward */
- return (lhs > rhs);
-}
-
-CORE_ADDR
-hppa32_stack_align (CORE_ADDR sp)
-{
- /* elz: adjust the quantity to the next highest value which is
- 64-bit aligned. This is used in valops.c, when the sp is adjusted.
- On hppa the sp must always be kept 64-bit aligned */
- return ((sp % 8) ? (sp + 7) & -8 : sp);
-}
-
-CORE_ADDR
-hppa64_stack_align (CORE_ADDR sp)
-{
- /* The PA64 ABI mandates a 16 byte stack alignment. */
- return ((sp % 16) ? (sp + 15) & -16 : sp);
-}
-
int
hppa_pc_requires_run_before_use (CORE_ADDR pc)
{
return (!target_has_stack && (pc & 0xFF000000));
}
-int
-hppa_instruction_nullified (void)
-{
- /* brobecker 2002/11/07: Couldn't we use a ULONGEST here? It would
- avoid the type cast. I'm leaving it as is for now as I'm doing
- semi-mechanical multiarching-related changes. */
- const int ipsw = (int) read_register (IPSW_REGNUM);
- const int flags = (int) read_register (FLAGS_REGNUM);
-
- return ((ipsw & 0x00200000) && !(flags & 0x2));
-}
-
-int
-hppa_register_raw_size (int reg_nr)
-{
- /* All registers have the same size. */
- return DEPRECATED_REGISTER_SIZE;
-}
-
-/* Index within the register vector of the first byte of the space i
- used for register REG_NR. */
-
-int
-hppa_register_byte (int reg_nr)
-{
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
-
- return reg_nr * tdep->bytes_per_address;
-}
-
/* Return the GDB type object for the "standard" data type of data
in register N. */
-struct type *
-hppa32_register_virtual_type (int reg_nr)
+static struct type *
+hppa32_register_type (struct gdbarch *gdbarch, int reg_nr)
{
- if (reg_nr < FP4_REGNUM)
- return builtin_type_int;
+ if (reg_nr < HPPA_FP4_REGNUM)
+ return builtin_type_uint32;
else
- return builtin_type_float;
+ return builtin_type_ieee_single_big;
}
/* Return the GDB type object for the "standard" data type of data
in register N. hppa64 version. */
-struct type *
-hppa64_register_virtual_type (int reg_nr)
+static struct type *
+hppa64_register_type (struct gdbarch *gdbarch, int reg_nr)
{
- if (reg_nr < FP4_REGNUM)
- return builtin_type_unsigned_long_long;
+ if (reg_nr < HPPA_FP4_REGNUM)
+ return builtin_type_uint64;
else
- return builtin_type_double;
+ return builtin_type_ieee_double_big;
}
-/* Store the address of the place in which to copy the structure the
- subroutine will return. This is called from call_function. */
-
-void
-hppa_store_struct_return (CORE_ADDR addr, CORE_ADDR sp)
-{
- write_register (28, addr);
-}
/* Return True if REGNUM is not a register available to the user
through ptrace(). */
-int
+static int
hppa_cannot_store_register (int regnum)
{
return (regnum == 0
- || regnum == PCSQ_HEAD_REGNUM
- || (regnum >= PCSQ_TAIL_REGNUM && regnum < IPSW_REGNUM)
- || (regnum > IPSW_REGNUM && regnum < FP4_REGNUM));
+ || regnum == HPPA_PCSQ_HEAD_REGNUM
+ || (regnum >= HPPA_PCSQ_TAIL_REGNUM && regnum < HPPA_IPSW_REGNUM)
+ || (regnum > HPPA_IPSW_REGNUM && regnum < HPPA_FP4_REGNUM));
}
-CORE_ADDR
+static CORE_ADDR
hppa_smash_text_address (CORE_ADDR addr)
{
/* The low two bits of the PC on the PA contain the privilege level.
}
/* Get the ith function argument for the current function. */
-CORE_ADDR
+static CORE_ADDR
hppa_fetch_pointer_argument (struct frame_info *frame, int argi,
struct type *type)
{
CORE_ADDR addr;
- get_frame_register (frame, R0_REGNUM + 26 - argi, &addr);
+ get_frame_register (frame, HPPA_R0_REGNUM + 26 - argi, &addr);
return addr;
}
+static void
+hppa_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache,
+ int regnum, void *buf)
+{
+ ULONGEST tmp;
+
+ regcache_raw_read_unsigned (regcache, regnum, &tmp);
+ if (regnum == HPPA_PCOQ_HEAD_REGNUM || regnum == HPPA_PCOQ_TAIL_REGNUM)
+ tmp &= ~0x3;
+ store_unsigned_integer (buf, sizeof(tmp), tmp);
+}
+
+static CORE_ADDR
+hppa_find_global_pointer (struct value *function)
+{
+ return 0;
+}
+
+void
+hppa_frame_prev_register_helper (struct frame_info *next_frame,
+ struct trad_frame_saved_reg saved_regs[],
+ int regnum, int *optimizedp,
+ enum lval_type *lvalp, CORE_ADDR *addrp,
+ int *realnump, void *valuep)
+{
+ if (regnum == HPPA_PCOQ_TAIL_REGNUM)
+ {
+ if (valuep)
+ {
+ CORE_ADDR pc;
+
+ trad_frame_get_prev_register (next_frame, saved_regs,
+ HPPA_PCOQ_HEAD_REGNUM, optimizedp,
+ lvalp, addrp, realnump, valuep);
+
+ pc = extract_unsigned_integer (valuep, 4);
+ store_unsigned_integer (valuep, 4, pc + 4);
+ }
+
+ /* It's a computed value. */
+ *optimizedp = 0;
+ *lvalp = not_lval;
+ *addrp = 0;
+ *realnump = -1;
+ return;
+ }
+
+ /* Make sure the "flags" register is zero in all unwound frames.
+ The "flags" registers is a HP-UX specific wart, and only the code
+ in hppa-hpux-tdep.c depends on it. However, it is easier to deal
+ with it here. This shouldn't affect other systems since those
+ should provide zero for the "flags" register anyway. */
+ if (regnum == HPPA_FLAGS_REGNUM)
+ {
+ if (valuep)
+ store_unsigned_integer (valuep,
+ register_size (get_frame_arch (next_frame),
+ regnum),
+ 0);
+
+ /* It's a computed value. */
+ *optimizedp = 0;
+ *lvalp = not_lval;
+ *addrp = 0;
+ *realnump = -1;
+ return;
+ }
+
+ trad_frame_get_prev_register (next_frame, saved_regs, regnum,
+ optimizedp, lvalp, addrp, realnump, valuep);
+}
+\f
+
/* Here is a table of C type sizes on hppa with various compiles
and options. I measured this on PA 9000/800 with HP-UX 11.11
and these compilers:
return (arches->gdbarch);
/* If none found, then allocate and initialize one. */
- tdep = XMALLOC (struct gdbarch_tdep);
+ tdep = XZALLOC (struct gdbarch_tdep);
gdbarch = gdbarch_alloc (&info, tdep);
/* Determine from the bfd_arch_info structure if we are dealing with
else
tdep->bytes_per_address = 4;
+ tdep->find_global_pointer = hppa_find_global_pointer;
+
/* Some parts of the gdbarch vector depend on whether we are running
on a 32 bits or 64 bits target. */
switch (tdep->bytes_per_address)
case 4:
set_gdbarch_num_regs (gdbarch, hppa32_num_regs);
set_gdbarch_register_name (gdbarch, hppa32_register_name);
- set_gdbarch_deprecated_register_virtual_type
- (gdbarch, hppa32_register_virtual_type);
+ set_gdbarch_register_type (gdbarch, hppa32_register_type);
break;
case 8:
set_gdbarch_num_regs (gdbarch, hppa64_num_regs);
set_gdbarch_register_name (gdbarch, hppa64_register_name);
- set_gdbarch_deprecated_register_virtual_type
- (gdbarch, hppa64_register_virtual_type);
+ set_gdbarch_register_type (gdbarch, hppa64_register_type);
break;
default:
internal_error (__FILE__, __LINE__, "Unsupported address size: %d",
tdep->bytes_per_address);
}
- /* The following gdbarch vector elements depend on other parts of this
- vector which have been set above, depending on the ABI. */
- set_gdbarch_deprecated_register_bytes
- (gdbarch, gdbarch_num_regs (gdbarch) * tdep->bytes_per_address);
set_gdbarch_long_bit (gdbarch, tdep->bytes_per_address * TARGET_CHAR_BIT);
set_gdbarch_ptr_bit (gdbarch, tdep->bytes_per_address * TARGET_CHAR_BIT);
/* The following gdbarch vector elements do not depend on the address
size, or in any other gdbarch element previously set. */
set_gdbarch_skip_prologue (gdbarch, hppa_skip_prologue);
- set_gdbarch_skip_trampoline_code (gdbarch, hppa_skip_trampoline_code);
- set_gdbarch_in_solib_call_trampoline (gdbarch, hppa_in_solib_call_trampoline);
- set_gdbarch_in_solib_return_trampoline (gdbarch,
- hppa_in_solib_return_trampoline);
- set_gdbarch_inner_than (gdbarch, hppa_inner_than);
- set_gdbarch_deprecated_register_size (gdbarch, tdep->bytes_per_address);
- set_gdbarch_deprecated_fp_regnum (gdbarch, 3);
- set_gdbarch_sp_regnum (gdbarch, 30);
- set_gdbarch_fp0_regnum (gdbarch, 64);
- set_gdbarch_pc_regnum (gdbarch, PCOQ_HEAD_REGNUM);
- set_gdbarch_deprecated_register_raw_size (gdbarch, hppa_register_raw_size);
- set_gdbarch_deprecated_register_byte (gdbarch, hppa_register_byte);
- set_gdbarch_deprecated_register_virtual_size (gdbarch, hppa_register_raw_size);
- set_gdbarch_deprecated_max_register_raw_size (gdbarch, tdep->bytes_per_address);
- set_gdbarch_deprecated_max_register_virtual_size (gdbarch, 8);
+ set_gdbarch_in_function_epilogue_p (gdbarch,
+ hppa_in_function_epilogue_p);
+ set_gdbarch_inner_than (gdbarch, core_addr_greaterthan);
+ set_gdbarch_sp_regnum (gdbarch, HPPA_SP_REGNUM);
+ set_gdbarch_fp0_regnum (gdbarch, HPPA_FP0_REGNUM);
set_gdbarch_cannot_store_register (gdbarch, hppa_cannot_store_register);
+ set_gdbarch_cannot_fetch_register (gdbarch, hppa_cannot_store_register);
set_gdbarch_addr_bits_remove (gdbarch, hppa_smash_text_address);
set_gdbarch_smash_text_address (gdbarch, hppa_smash_text_address);
set_gdbarch_believe_pcc_promotion (gdbarch, 1);
- set_gdbarch_read_pc (gdbarch, hppa_target_read_pc);
- set_gdbarch_write_pc (gdbarch, hppa_target_write_pc);
- set_gdbarch_deprecated_target_read_fp (gdbarch, hppa_target_read_fp);
+ set_gdbarch_read_pc (gdbarch, hppa_read_pc);
+ set_gdbarch_write_pc (gdbarch, hppa_write_pc);
/* Helper for function argument information. */
set_gdbarch_fetch_pointer_argument (gdbarch, hppa_fetch_pointer_argument);
set_gdbarch_have_nonsteppable_watchpoint (gdbarch, 1);
/* Inferior function call methods. */
-#if 0
-#else
switch (tdep->bytes_per_address)
{
case 4:
- set_gdbarch_deprecated_call_dummy_length (gdbarch, hppa32_call_dummy_length);
- set_gdbarch_deprecated_stack_align (gdbarch, hppa32_stack_align);
- set_gdbarch_deprecated_reg_struct_has_addr (gdbarch, hppa_reg_struct_has_addr);
- set_gdbarch_deprecated_extract_return_value (gdbarch, hppa32_extract_return_value);
- set_gdbarch_use_struct_convention (gdbarch, hppa32_use_struct_convention);
- set_gdbarch_deprecated_store_return_value (gdbarch, hppa32_store_return_value);
+ set_gdbarch_push_dummy_call (gdbarch, hppa32_push_dummy_call);
+ set_gdbarch_frame_align (gdbarch, hppa32_frame_align);
+ set_gdbarch_convert_from_func_ptr_addr
+ (gdbarch, hppa32_convert_from_func_ptr_addr);
+ break;
+ case 8:
+ set_gdbarch_push_dummy_call (gdbarch, hppa64_push_dummy_call);
+ set_gdbarch_frame_align (gdbarch, hppa64_frame_align);
+ break;
+ default:
+ internal_error (__FILE__, __LINE__, "bad switch");
+ }
+
+ /* Struct return methods. */
+ switch (tdep->bytes_per_address)
+ {
+ case 4:
+ set_gdbarch_return_value (gdbarch, hppa32_return_value);
break;
case 8:
- set_gdbarch_deprecated_call_dummy_breakpoint_offset (gdbarch, hppa64_call_dummy_breakpoint_offset);
- set_gdbarch_deprecated_call_dummy_length (gdbarch, hppa64_call_dummy_length);
- set_gdbarch_deprecated_stack_align (gdbarch, hppa64_stack_align);
- set_gdbarch_deprecated_extract_return_value (gdbarch, hppa64_extract_return_value);
- set_gdbarch_use_struct_convention (gdbarch, hppa64_use_struct_convention);
- set_gdbarch_deprecated_store_return_value (gdbarch, hppa64_store_return_value);
+ set_gdbarch_return_value (gdbarch, hppa64_return_value);
break;
+ default:
+ internal_error (__FILE__, __LINE__, "bad switch");
}
- set_gdbarch_deprecated_store_struct_return (gdbarch, hppa_store_struct_return);
- set_gdbarch_deprecated_push_dummy_frame (gdbarch, hppa_push_dummy_frame);
- /* set_gdbarch_deprecated_fix_call_dummy (gdbarch, hppa_fix_call_dummy); */
- set_gdbarch_deprecated_push_arguments (gdbarch, hppa_push_arguments);
-#endif
+
+ set_gdbarch_breakpoint_from_pc (gdbarch, hppa_breakpoint_from_pc);
+ set_gdbarch_pseudo_register_read (gdbarch, hppa_pseudo_register_read);
/* Frame unwind methods. */
-#if 0
-#else
- set_gdbarch_deprecated_saved_pc_after_call (gdbarch, hppa_saved_pc_after_call);
- set_gdbarch_deprecated_init_extra_frame_info (gdbarch, hppa_init_extra_frame_info);
- set_gdbarch_deprecated_frame_chain (gdbarch, hppa_frame_chain);
- set_gdbarch_deprecated_frame_chain_valid (gdbarch, hppa_frame_chain_valid);
- set_gdbarch_deprecated_frameless_function_invocation (gdbarch, hppa_frameless_function_invocation);
- set_gdbarch_deprecated_frame_saved_pc (gdbarch, hppa_frame_saved_pc);
- set_gdbarch_deprecated_pop_frame (gdbarch, hppa_pop_frame);
-#endif
+ set_gdbarch_unwind_dummy_id (gdbarch, hppa_unwind_dummy_id);
+ set_gdbarch_unwind_pc (gdbarch, hppa_unwind_pc);
/* Hook in ABI-specific overrides, if they have been registered. */
gdbarch_init_osabi (info, gdbarch);
+ /* Hook in the default unwinders. */
+ frame_unwind_append_sniffer (gdbarch, hppa_stub_unwind_sniffer);
+ frame_unwind_append_sniffer (gdbarch, hppa_frame_unwind_sniffer);
+ frame_unwind_append_sniffer (gdbarch, hppa_fallback_unwind_sniffer);
+
return gdbarch;
}
static void
hppa_dump_tdep (struct gdbarch *current_gdbarch, struct ui_file *file)
{
- /* Nothing to print for the moment. */
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+
+ fprintf_unfiltered (file, "bytes_per_address = %d\n",
+ tdep->bytes_per_address);
+ fprintf_unfiltered (file, "elf = %s\n", tdep->is_elf ? "yes" : "no");
}
void
_initialize_hppa_tdep (void)
{
struct cmd_list_element *c;
- void break_at_finish_command (char *arg, int from_tty);
- void tbreak_at_finish_command (char *arg, int from_tty);
- void break_at_finish_at_depth_command (char *arg, int from_tty);
gdbarch_register (bfd_arch_hppa, hppa_gdbarch_init, hppa_dump_tdep);
+ hppa_objfile_priv_data = register_objfile_data ();
+
add_cmd ("unwind", class_maintenance, unwind_command,
"Print unwind table entry at given address.",
&maintenanceprintlist);
- deprecate_cmd (add_com ("xbreak", class_breakpoint,
- break_at_finish_command,
- concat ("Set breakpoint at procedure exit. \n\
-Argument may be function name, or \"*\" and an address.\n\
-If function is specified, break at end of code for that function.\n\
-If an address is specified, break at the end of the function that contains \n\
-that exact address.\n",
- "With no arg, uses current execution address of selected stack frame.\n\
-This is useful for breaking on return to a stack frame.\n\
-\n\
-Multiple breakpoints at one place are permitted, and useful if conditional.\n\
-\n\
-Do \"help breakpoints\" for info on other commands dealing with breakpoints.", NULL)), NULL);
- deprecate_cmd (add_com_alias ("xb", "xbreak", class_breakpoint, 1), NULL);
- deprecate_cmd (add_com_alias ("xbr", "xbreak", class_breakpoint, 1), NULL);
- deprecate_cmd (add_com_alias ("xbre", "xbreak", class_breakpoint, 1), NULL);
- deprecate_cmd (add_com_alias ("xbrea", "xbreak", class_breakpoint, 1), NULL);
-
- deprecate_cmd (c = add_com ("txbreak", class_breakpoint,
- tbreak_at_finish_command,
-"Set temporary breakpoint at procedure exit. Either there should\n\
-be no argument or the argument must be a depth.\n"), NULL);
- set_cmd_completer (c, location_completer);
-
- if (xdb_commands)
- deprecate_cmd (add_com ("bx", class_breakpoint,
- break_at_finish_at_depth_command,
-"Set breakpoint at procedure exit. Either there should\n\
-be no argument or the argument must be a depth.\n"), NULL);
+ /* Debug this files internals. */
+ add_setshow_boolean_cmd ("hppa", class_maintenance, &hppa_debug, "\
+Set whether hppa target specific debugging information should be displayed.", "\
+Show whether hppa target specific debugging information is displayed.", "\
+This flag controls whether hppa target specific debugging information is\n\
+displayed. This information is particularly useful for debugging frame\n\
+unwinding problems.", "hppa debug flag is %s.",
+ NULL, NULL, &setdebuglist, &showdebuglist);
}
-
projects / deliverable / binutils-gdb.git / blobdiff