static void pa_register_look_aside PARAMS ((char *, int, long *));
static void pa_print_fp_reg PARAMS ((int));
static void pa_strcat_fp_reg PARAMS ((int, GDB_FILE *, enum precision_type));
+static void record_text_segment_lowaddr PARAMS ((bfd *, asection *, void *));
typedef struct
{
return 0;
}
+static CORE_ADDR low_text_segment_address;
+
+static void
+record_text_segment_lowaddr (abfd, section, ignored)
+ bfd *abfd ATTRIBUTE_UNUSED;
+ asection *section;
+ PTR ignored ATTRIBUTE_UNUSED;
+{
+ if ((section->flags & (SEC_ALLOC | SEC_LOAD | SEC_READONLY)
+ == (SEC_ALLOC | SEC_LOAD | SEC_READONLY))
+ && section->vma < low_text_segment_address)
+ low_text_segment_address = section->vma;
+}
+
static void
internalize_unwinds (objfile, table, section, entries, size, text_offset)
struct objfile *objfile;
unsigned i;
char *buf = alloca (size);
+ low_text_segment_address = -1;
+
+ /* If addresses are 64 bits wide, then unwinds are supposed to
+ be segment relative offsets instead of absolute addresses. */
+ if (TARGET_PTR_BIT == 64)
+ {
+ bfd_map_over_sections (objfile->obfd,
+ record_text_segment_lowaddr, (PTR) NULL);
+
+ /* ?!? Mask off some low bits. Should this instead subtract
+ out the lowest section's filepos or something like that?
+ This looks very hokey to me. */
+ low_text_segment_address &= ~0xfff;
+ text_offset += low_text_segment_address;
+ }
+
bfd_get_section_contents (objfile->obfd, section, buf, 0, size);
/* Now internalize the information being careful to handle host/target
sizeof (obj_private_data_t));
obj_private->unwind_info = NULL;
obj_private->so_info = NULL;
+ obj_private->dp = 0;
objfile->obj_private = (PTR) obj_private;
}
}
if (u->Save_RP)
- return -20;
+ return (TARGET_PTR_BIT == 64 ? -16 : -20);
else if (u->stub_unwind.stub_type != 0)
{
switch (u->stub_unwind.stub_type)
are saved in the exact same order as GDB numbers registers. How
convienent. */
if (pc_in_interrupt_handler (pc))
- return read_memory_integer (frame->frame + PC_REGNUM * 4, 4) & ~0x3;
+ return read_memory_integer (frame->frame + PC_REGNUM * 4,
+ TARGET_PTR_BIT / 8) & ~0x3;
#ifdef FRAME_SAVED_PC_IN_SIGTRAMP
/* Deal with signal handler caller frames too. */
struct frame_saved_regs saved_regs;
get_frame_saved_regs (frame->next, &saved_regs);
- if (read_memory_integer (saved_regs.regs[FLAGS_REGNUM], 4) & 0x2)
+ if (read_memory_integer (saved_regs.regs[FLAGS_REGNUM],
+ TARGET_PTR_BIT / 8) & 0x2)
{
- pc = read_memory_integer (saved_regs.regs[31], 4) & ~0x3;
+ pc = read_memory_integer (saved_regs.regs[31],
+ TARGET_PTR_BIT / 8) & ~0x3;
/* Syscalls are really two frames. The syscall stub itself
with a return pointer in %rp and the kernel call with
a return pointer in %r31. We return the %rp variant
if %r31 is the same as frame->pc. */
if (pc == frame->pc)
- pc = read_memory_integer (saved_regs.regs[RP_REGNUM], 4) & ~0x3;
+ pc = read_memory_integer (saved_regs.regs[RP_REGNUM],
+ TARGET_PTR_BIT / 8) & ~0x3;
}
else
- pc = read_memory_integer (saved_regs.regs[RP_REGNUM], 4) & ~0x3;
+ pc = read_memory_integer (saved_regs.regs[RP_REGNUM],
+ TARGET_PTR_BIT / 8) & ~0x3;
}
else
pc = read_register (ret_regnum) & ~0x3;
struct frame_saved_regs saved_regs;
get_frame_saved_regs (frame->next, &saved_regs);
- if (read_memory_integer (saved_regs.regs[FLAGS_REGNUM], 4) & 0x2)
+ if (read_memory_integer (saved_regs.regs[FLAGS_REGNUM],
+ TARGET_PTR_BIT / 8) & 0x2)
{
- pc = read_memory_integer (saved_regs.regs[31], 4) & ~0x3;
+ pc = read_memory_integer (saved_regs.regs[31],
+ TARGET_PTR_BIT / 8) & ~0x3;
/* Syscalls are really two frames. The syscall stub itself
with a return pointer in %rp and the kernel call with
a return pointer in %r31. We return the %rp variant
if %r31 is the same as frame->pc. */
if (pc == frame->pc)
- pc = read_memory_integer (saved_regs.regs[RP_REGNUM], 4) & ~0x3;
+ pc = read_memory_integer (saved_regs.regs[RP_REGNUM],
+ TARGET_PTR_BIT / 8) & ~0x3;
}
else
- pc = read_memory_integer (saved_regs.regs[RP_REGNUM], 4) & ~0x3;
+ pc = read_memory_integer (saved_regs.regs[RP_REGNUM],
+ TARGET_PTR_BIT / 8) & ~0x3;
}
else if (rp_offset == 0)
{
else
{
old_pc = pc;
- pc = read_memory_integer (frame->frame + rp_offset, 4) & ~0x3;
+ pc = read_memory_integer (frame->frame + rp_offset,
+ TARGET_PTR_BIT / 8) & ~0x3;
}
}
pull the old stack pointer from. Also see frame_saved_pc for
code to dig a saved PC out of the save state structure. */
if (pc_in_interrupt_handler (frame->pc))
- frame_base = read_memory_integer (frame->frame + SP_REGNUM * 4, 4);
+ frame_base = read_memory_integer (frame->frame + SP_REGNUM * 4,
+ TARGET_PTR_BIT / 8);
#ifdef FRAME_BASE_BEFORE_SIGTRAMP
else if (frame->signal_handler_caller)
{
The previous frame pointer is found at the top of the current frame. */
if (caller_framesize == -1 && my_framesize == -1)
{
- return read_memory_integer (frame_base, 4);
+ return read_memory_integer (frame_base, TARGET_PTR_BIT / 8);
}
/* Caller has a frame pointer, but callee does not. This is a little
more difficult as GCC and HP C lay out locals and callee register save
&& !tmp_frame->signal_handler_caller
&& !pc_in_interrupt_handler (tmp_frame->pc))
{
- return read_memory_integer (tmp_frame->frame, 4);
+ return read_memory_integer (tmp_frame->frame, TARGET_PTR_BIT / 8);
}
/* %r3 was saved somewhere in the stack. Dig it out. */
else
/* Abominable hack. */
if (current_target.to_has_execution == 0
&& ((saved_regs.regs[FLAGS_REGNUM]
- && (read_memory_integer (saved_regs.regs[FLAGS_REGNUM], 4)
+ && (read_memory_integer (saved_regs.regs[FLAGS_REGNUM],
+ TARGET_PTR_BIT / 8)
& 0x2))
|| (saved_regs.regs[FLAGS_REGNUM] == 0
&& read_register (FLAGS_REGNUM) & 0x2)))
u = find_unwind_entry (FRAME_SAVED_PC (frame));
if (!u)
{
- return read_memory_integer (saved_regs.regs[FP_REGNUM], 4);
+ return read_memory_integer (saved_regs.regs[FP_REGNUM],
+ TARGET_PTR_BIT / 8);
}
else
{
}
}
- return read_memory_integer (saved_regs.regs[FP_REGNUM], 4);
+ return read_memory_integer (saved_regs.regs[FP_REGNUM],
+ TARGET_PTR_BIT / 8);
}
}
else
/* Abominable hack. See above. */
if (current_target.to_has_execution == 0
&& ((saved_regs.regs[FLAGS_REGNUM]
- && (read_memory_integer (saved_regs.regs[FLAGS_REGNUM], 4)
+ && (read_memory_integer (saved_regs.regs[FLAGS_REGNUM],
+ TARGET_PTR_BIT / 8)
& 0x2))
|| (saved_regs.regs[FLAGS_REGNUM] == 0
&& read_register (FLAGS_REGNUM) & 0x2)))
u = find_unwind_entry (FRAME_SAVED_PC (frame));
if (!u)
{
- return read_memory_integer (saved_regs.regs[FP_REGNUM], 4);
+ return read_memory_integer (saved_regs.regs[FP_REGNUM],
+ TARGET_PTR_BIT / 8);
}
else
{
{
CORE_ADDR sp, pc, pcspace;
register int regnum;
- int int_buffer;
+ CORE_ADDR int_buffer;
double freg_buffer;
/* Oh, what a hack. If we're trying to perform an inferior call
/* Space for "arguments"; the RP goes in here. */
sp = read_register (SP_REGNUM) + 48;
int_buffer = read_register (RP_REGNUM) | 0x3;
- write_memory (sp - 20, (char *) &int_buffer, 4);
+
+ /* The 32bit and 64bit ABIs save the return pointer into different
+ stack slots. */
+ if (REGISTER_SIZE == 8)
+ write_memory (sp - 16, (char *) &int_buffer, REGISTER_SIZE);
+ else
+ write_memory (sp - 20, (char *) &int_buffer, REGISTER_SIZE);
int_buffer = TARGET_READ_FP ();
- write_memory (sp, (char *) &int_buffer, 4);
+ write_memory (sp, (char *) &int_buffer, REGISTER_SIZE);
write_register (FP_REGNUM, sp);
- sp += 8;
+ sp += 2 * REGISTER_SIZE;
for (regnum = 1; regnum < 32; regnum++)
if (regnum != RP_REGNUM && regnum != FP_REGNUM)
sp = push_word (sp, read_register (regnum));
- sp += 4;
+ /* This is not necessary for the 64bit ABI. In fact it is dangerous. */
+ if (REGISTER_SIZE != 8)
+ sp += 4;
for (regnum = FP0_REGNUM; regnum < NUM_REGS; regnum++)
{
CORE_ADDR fp = frame->frame;
int i;
- frame_saved_regs->regs[RP_REGNUM] = (fp - 20) & ~0x3;
+ /* The 32bit and 64bit ABIs save RP into different locations. */
+ if (REGISTER_SIZE == 8)
+ frame_saved_regs->regs[RP_REGNUM] = (fp - 16) & ~0x3;
+ else
+ frame_saved_regs->regs[RP_REGNUM] = (fp - 20) & ~0x3;
+
frame_saved_regs->regs[FP_REGNUM] = fp;
- frame_saved_regs->regs[1] = fp + 8;
- for (fp += 12, i = 3; i < 32; i++)
+ frame_saved_regs->regs[1] = fp + (2 * REGISTER_SIZE);
+
+ for (fp += 3 * REGISTER_SIZE, i = 3; i < 32; i++)
{
if (i != FP_REGNUM)
{
frame_saved_regs->regs[i] = fp;
- fp += 4;
+ fp += REGISTER_SIZE;
}
}
- fp += 4;
+ /* This is not necessary or desirable for the 64bit ABI. */
+ if (REGISTER_SIZE != 8)
+ fp += 4;
+
for (i = FP0_REGNUM; i < NUM_REGS; i++, fp += 8)
frame_saved_regs->regs[i] = fp;
frame_saved_regs->regs[IPSW_REGNUM] = fp;
- frame_saved_regs->regs[SAR_REGNUM] = fp + 4;
- frame_saved_regs->regs[PCOQ_HEAD_REGNUM] = fp + 8;
- frame_saved_regs->regs[PCSQ_HEAD_REGNUM] = fp + 12;
- frame_saved_regs->regs[PCOQ_TAIL_REGNUM] = fp + 16;
- frame_saved_regs->regs[PCSQ_TAIL_REGNUM] = fp + 20;
+ frame_saved_regs->regs[SAR_REGNUM] = fp + REGISTER_SIZE;
+ frame_saved_regs->regs[PCOQ_HEAD_REGNUM] = fp + 2 * REGISTER_SIZE;
+ frame_saved_regs->regs[PCSQ_HEAD_REGNUM] = fp + 3 * REGISTER_SIZE;
+ frame_saved_regs->regs[PCOQ_TAIL_REGNUM] = fp + 4 * REGISTER_SIZE;
+ frame_saved_regs->regs[PCSQ_TAIL_REGNUM] = fp + 5 * REGISTER_SIZE;
}
void
for (regnum = 31; regnum > 0; regnum--)
if (fsr.regs[regnum])
- write_register (regnum, read_memory_integer (fsr.regs[regnum], 4));
+ write_register (regnum, read_memory_integer (fsr.regs[regnum],
+ REGISTER_SIZE));
for (regnum = NUM_REGS - 1; regnum >= FP0_REGNUM; regnum--)
if (fsr.regs[regnum])
if (fsr.regs[IPSW_REGNUM])
write_register (IPSW_REGNUM,
- read_memory_integer (fsr.regs[IPSW_REGNUM], 4));
+ read_memory_integer (fsr.regs[IPSW_REGNUM],
+ REGISTER_SIZE));
if (fsr.regs[SAR_REGNUM])
write_register (SAR_REGNUM,
- read_memory_integer (fsr.regs[SAR_REGNUM], 4));
+ read_memory_integer (fsr.regs[SAR_REGNUM],
+ REGISTER_SIZE));
/* If the PC was explicitly saved, then just restore it. */
if (fsr.regs[PCOQ_TAIL_REGNUM])
{
- npc = read_memory_integer (fsr.regs[PCOQ_TAIL_REGNUM], 4);
+ npc = read_memory_integer (fsr.regs[PCOQ_TAIL_REGNUM],
+ REGISTER_SIZE);
write_register (PCOQ_TAIL_REGNUM, npc);
}
/* Else use the value in %rp to set the new PC. */
write_pc (npc);
}
- write_register (FP_REGNUM, read_memory_integer (fp, 4));
+ write_register (FP_REGNUM, read_memory_integer (fp, REGISTER_SIZE));
if (fsr.regs[IPSW_REGNUM]) /* call dummy */
write_register (SP_REGNUM, fp - 48);
struct frame_saved_regs *fsr;
{
CORE_ADDR pc = read_pc ();
- CORE_ADDR new_pc = read_memory_integer (fsr->regs[PCOQ_HEAD_REGNUM], 4);
+ CORE_ADDR new_pc = read_memory_integer (fsr->regs[PCOQ_HEAD_REGNUM],
+ TARGET_PTR_BIT / 8);
struct target_waitstatus w;
int insn_count;
So, load up the registers and single step until we are in the
right place. */
- write_register (21, read_memory_integer (fsr->regs[PCSQ_HEAD_REGNUM], 4));
+ write_register (21, read_memory_integer (fsr->regs[PCSQ_HEAD_REGNUM],
+ REGISTER_SIZE));
write_register (22, new_pc);
for (insn_count = 0; insn_count < 3; insn_count++)
return 1;
}
-#if 0
-CORE_ADDR
-hppa_push_arguments (nargs, args, sp, struct_return, struct_addr)
- int nargs;
- value_ptr *args;
- CORE_ADDR sp;
- int struct_return;
- CORE_ADDR struct_addr;
-{
- /* array of arguments' offsets */
- int *offset = (int *) alloca (nargs * sizeof (int));
- int cum = 0;
- int i, alignment;
-
- for (i = 0; i < nargs; i++)
- {
- int x = 0;
- /* cum is the sum of the lengths in bytes of
- the arguments seen so far */
- cum += TYPE_LENGTH (VALUE_TYPE (args[i]));
+/* This function pushes a stack frame with arguments as part of the
+ inferior function calling mechanism.
- /* value must go at proper alignment. Assume alignment is a
- power of two. */
- alignment = hppa_alignof (VALUE_TYPE (args[i]));
+ For PAs the stack always grows to higher addresses. However the arguments
+ may grow to either higher or lower addresses depending on which ABI is
+ currently in use.
- if (cum % alignment)
- cum = (cum + alignment) & -alignment;
- offset[i] = -cum;
-
- }
- sp += max ((cum + 7) & -8, 16);
-
- for (i = 0; i < nargs; i++)
- write_memory (sp + offset[i], VALUE_CONTENTS (args[i]),
- TYPE_LENGTH (VALUE_TYPE (args[i])));
-
- if (struct_return)
- write_register (28, struct_addr);
- return sp + 32;
-}
-#endif
-
-/* elz: I am rewriting this function, because the one above is a very
- obscure piece of code.
- This function pushes the arguments on the stack. The stack grows up
- on the PA.
- Each argument goes in one (or more) word (4 bytes) on the stack.
- The first four words for the args must be allocated, even if they
- are not used.
- The 'topmost' arg is arg0, the 'bottom-most' is arg3. (if you think of
- them as 1 word long).
- Below these there can be any number of arguments, as needed by the function.
- If an arg is bigger than one word, it will be written on the stack
- occupying as many words as needed. Args that are bigger than 64bits
- are not copied on the stack, a pointer is passed instead.
-
- On top of the arg0 word there are other 8 words (32bytes) which are used
- for other purposes */
+ We simply allocate the appropriate amount of stack space and put
+ arguments into their proper slots. The call dummy code will copy
+ arguments into registers as needed by the ABI.
+ Note for the PA64 ABI we load up the argument pointer since the caller
+ must provide the argument pointer to the callee. */
+
CORE_ADDR
hppa_push_arguments (nargs, args, sp, struct_return, struct_addr)
int nargs;
{
/* array of arguments' offsets */
int *offset = (int *) alloca (nargs * sizeof (int));
- /* array of arguments' lengths: real lengths in bytes, not aligned to word size */
+
+ /* array of arguments' lengths: real lengths in bytes, not aligned to
+ word size */
int *lengths = (int *) alloca (nargs * sizeof (int));
- int bytes_reserved; /* this is the number of bytes on the stack occupied by an
- argument. This will be always a multiple of 4 */
+ /* The value of SP as it was passed into this function after
+ aligning. */
+ CORE_ADDR orig_sp = STACK_ALIGN (sp);
- int cum_bytes_reserved = 0; /* this is the total number of bytes reserved by the args
- seen so far. It is a multiple of 4 always */
- int cum_bytes_aligned = 0; /* same as above, but aligned on 8 bytes */
- int i;
+ /* The number of stack bytes occupied by the current argument. */
+ int bytes_reserved;
+
+ /* The total number of bytes reserved for the arguments. */
+ int cum_bytes_reserved = 0;
- /* When an arg does not occupy a whole word, for instance in bitfields:
- if the arg is x bits (0<x<32), it must be written
- starting from the (x-1)-th position down until the 0-th position.
- It is enough to align it to the word. */
- /* if an arg occupies 8 bytes, it must be aligned on the 64-bits
- high order word in odd arg word. */
- /* if an arg is larger than 64 bits, we need to pass a pointer to it, and
- copy the actual value on the stack, so that the callee can play with it.
- This is taken care of in valops.c in the call_function_by_hand function.
- The argument that is received in this function here has already be converted
- to a pointer to whatever is needed, so that it just can be pushed
- as a word argument */
+ /* Similarly, but aligned. */
+ int cum_bytes_aligned = 0;
+ int i;
+ /* Iterate over each argument provided by the user. */
for (i = 0; i < nargs; i++)
{
-
lengths[i] = TYPE_LENGTH (VALUE_TYPE (args[i]));
- if (lengths[i] % 4)
- bytes_reserved = (lengths[i] / 4) * 4 + 4;
- else
- bytes_reserved = lengths[i];
+ /* Align the size of the argument to the word size for this
+ target. */
+ bytes_reserved = (lengths[i] + REGISTER_SIZE - 1) & -REGISTER_SIZE;
+#ifdef ARGS_GROW_DOWNWARD
offset[i] = cum_bytes_reserved + lengths[i];
+#else
+ /* If the arguments grow towards lower addresses, then we want
+ offset[i] to point to the start of the argument rather than
+ the end of the argument. */
+ offset[i] = cum_bytes_reserved;
+
+ offset[i] += (lengths[i] < REGISTER_SIZE
+ ? REGISTER_SIZE - lengths[i] : 0);
+#endif
- if ((bytes_reserved == 8) && (offset[i] % 8)) /* if 64-bit arg is not 64 bit aligned */
+ /* If the argument is a double word argument, then it needs to be
+ double word aligned.
+
+ ?!? I do not think this code is correct when !ARGS_GROW_DOWNWAR. */
+ if ((bytes_reserved == 2 * REGISTER_SIZE)
+ && (offset[i] % 2 * REGISTER_SIZE))
{
int new_offset = 0;
- /* bytes_reserved is already aligned to the word, so we put it at one word
- more down the stack. This will leave one empty word on the
- stack, and one unused register. This is OK, see the calling
- convention doc */
- /* the offset may have to be moved to the corresponding position
- one word down the stack, to maintain
- alignment. */
- new_offset = (offset[i] / 8) * 8 + 8;
- if ((new_offset - offset[i]) >= 4)
+ /* BYTES_RESERVED is already aligned to the word, so we put
+ the argument at one word more down the stack.
+
+ This will leave one empty word on the stack, and one unused
+ register as mandated by the ABI. */
+ new_offset = ((offset[i] + 2 * REGISTER_SIZE - 1)
+ & -(2 * REGISTER_SIZE));
+
+ if ((new_offset - offset[i]) >= 2 * REGISTER_SIZE)
{
- bytes_reserved += 4;
- offset[i] += 4;
+ bytes_reserved += REGISTER_SIZE;
+ offset[i] += REGISTER_SIZE;
}
}
}
- /* now move up the sp to reserve at least 4 words required for the args,
- or more than this if needed */
- /* wee also need to keep the sp aligned to 8 bytes */
+ /* CUM_BYTES_RESERVED already accounts for all the arguments
+ passed by the user. However, the ABIs mandate minimum stack space
+ allocations for outgoing arguments.
+
+ The ABIs also mandate minimum stack alignments which we must
+ preserve. */
cum_bytes_aligned = STACK_ALIGN (cum_bytes_reserved);
- sp += max (cum_bytes_aligned, 16);
+ sp += max (cum_bytes_aligned, REG_PARM_STACK_SPACE);
+
+ /* Now write each of the args at the proper offset down the stack.
+
+ The two ABIs write arguments in different directions using different
+ starting points. What fun.
- /* now write each of the args at the proper offset down the stack */
+ ?!? We need to promote values to a full register instead of skipping
+ words in the stack. */
+#ifndef ARGS_GROW_DOWNWARD
+ for (i = 0; i < nargs; i++)
+ write_memory (orig_sp + offset[i], VALUE_CONTENTS (args[i]), lengths[i]);
+#else
for (i = 0; i < nargs; i++)
write_memory (sp - offset[i], VALUE_CONTENTS (args[i]), lengths[i]);
+#endif
-
- /* if a structure has to be returned, set up register 28 to hold its address */
+ /* If a structure has to be returned, set up register 28 to hold its
+ address */
if (struct_return)
write_register (28, struct_addr);
- /* the stack will have other 8 words on top of the args */
+#ifndef ARGS_GROW_DOWNWARD
+ /* For the PA64 we must pass a pointer to the outgoing argument list.
+ The ABI mandates that the pointer should point to the first byte of
+ storage beyond the register flushback area.
+
+ However, the call dummy expects the outgoing argument pointer to
+ be passed in register %r4. */
+ write_register (4, orig_sp + REG_PARM_STACK_SPACE);
+
+ /* ?!? This needs further work. We need to set up the global data
+ pointer for this procedure. This assumes the same global pointer
+ for every procedure. The call dummy expects the dp value to
+ be passed in register %r6. */
+ write_register (6, read_register (27));
+#endif
+
+ /* The stack will have 32 bytes of additional space for a frame marker. */
return sp + 32;
}
use a PLABEL instead of an import stub. */
int using_gcc_plt_call = 1;
+#ifdef GDB_TARGET_IS_HPPA_20W
+ /* We currently use completely different code for the PA2.0W inferior
+ function call sequences. This needs to be cleaned up. */
+ {
+ CORE_ADDR pcsqh, pcsqt, pcoqh, pcoqt, sr5;
+ struct target_waitstatus w;
+ int inst1, inst2;
+ char buf[4];
+ int status;
+ struct objfile *objfile;
+
+ /* We can not modify the PC space queues directly, so we start
+ up the inferior and execute a couple instructions to set the
+ space queues so that they point to the call dummy in the stack. */
+ pcsqh = read_register (PCSQ_HEAD_REGNUM);
+ sr5 = read_register (SR5_REGNUM);
+ if (1)
+ {
+ pcoqh = read_register (PCOQ_HEAD_REGNUM);
+ pcoqt = read_register (PCOQ_TAIL_REGNUM);
+ if (target_read_memory (pcoqh, buf, 4) != 0)
+ error ("Couldn't modify space queue\n");
+ inst1 = extract_unsigned_integer (buf, 4);
+
+ if (target_read_memory (pcoqt, buf, 4) != 0)
+ error ("Couldn't modify space queue\n");
+ inst2 = extract_unsigned_integer (buf, 4);
+
+ /* BVE (r1) */
+ *((int *) buf) = 0xe820d000;
+ if (target_write_memory (pcoqh, buf, 4) != 0)
+ error ("Couldn't modify space queue\n");
+
+ /* NOP */
+ *((int *) buf) = 0x08000240;
+ if (target_write_memory (pcoqt, buf, 4) != 0)
+ {
+ *((int *) buf) = inst1;
+ target_write_memory (pcoqh, buf, 4);
+ error ("Couldn't modify space queue\n");
+ }
+
+ write_register (1, pc);
+
+ /* Single step twice, the BVE instruction will set the space queue
+ such that it points to the PC value written immediately above
+ (ie the call dummy). */
+ resume (1, 0);
+ target_wait (inferior_pid, &w);
+ resume (1, 0);
+ target_wait (inferior_pid, &w);
+
+ /* Restore the two instructions at the old PC locations. */
+ *((int *) buf) = inst1;
+ target_write_memory (pcoqh, buf, 4);
+ *((int *) buf) = inst2;
+ target_write_memory (pcoqt, buf, 4);
+ }
+
+ /* The call dummy wants the ultimate destination address initially
+ in register %r5. */
+ write_register (5, fun);
+
+ /* We need to see if this objfile has a different DP value than our
+ own (it could be a shared library for example. */
+ ALL_OBJFILES (objfile)
+ {
+ struct obj_section *s;
+ obj_private_data_t *obj_private;
+
+ /* See if FUN is in any section within this shared library. */
+ for (s = objfile->sections; s < objfile->sections_end; s++)
+ if (s->addr <= fun && fun < s->endaddr)
+ break;
+
+ if (s >= objfile->sections_end)
+ continue;
+
+ obj_private = (obj_private_data_t *) objfile->obj_private;
+
+ /* The DP value may be different for each objfile. But within an
+ objfile each function uses the same dp value. Thus we do not need
+ to grope around the opd section looking for dp values.
+
+ ?!? This is not strictly correct since we may be in a shared library
+ and want to call back into the main program. To make that case
+ work correctly we need to set obj_private->dp for the main program's
+ objfile, then remove this conditional. */
+ if (obj_private->dp)
+ write_register (27, obj_private->dp);
+ break;
+ }
+ return pc;
+ }
+#endif
+
+#ifndef GDB_TARGET_IS_HPPA_20W
/* Prefer __gcc_plt_call over the HP supplied routine because
__gcc_plt_call works for any number of arguments. */
trampoline = NULL;
/* Get the GOT/DP value for the target function. It's
at *(fun+4). Note the call dummy is *NOT* allowed to
trash %r19 before calling the target function. */
- write_register (19, read_memory_integer ((fun & ~0x3) + 4, 4));
+ write_register (19, read_memory_integer ((fun & ~0x3) + 4,
+ REGISTER_SIZE));
/* Now get the real address for the function we are calling, it's
at *fun. */
- fun = (CORE_ADDR) read_memory_integer (fun & ~0x3, 4);
+ fun = (CORE_ADDR) read_memory_integer (fun & ~0x3,
+ TARGET_PTR_BIT / 8);
}
else
{
}
}
-#ifndef GDB_TARGET_IS_HPPA_20W
/* Store upper 21 bits of function address into ldil. fun will either be
the final target (most cases) or __d_plt_call when calling into a shared
library and __gcc_plt_call is not available. */
deposit_14 (fun & MASK_11,
extract_unsigned_integer (&dummy[FUNC_LDO_OFFSET],
INSTRUCTION_SIZE)));
-#endif /* GDB_TARGET_IS_HPPA_20W */
#ifdef SR4EXPORT_LDIL_OFFSET
{
#endif
else
return dyncall_addr;
+#endif
}
calling an argument relocation stub. It even handles some stubs
used in dynamic executables. */
-#if 0
-CORE_ADDR
-skip_trampoline_code (pc, name)
- CORE_ADDR pc;
- char *name;
-{
- return find_solib_trampoline_target (pc);
-}
-
-#endif
-
CORE_ADDR
skip_trampoline_code (pc, name)
CORE_ADDR pc;
the PLT entry for this function, not the address of the function
itself. Bit 31 has meaning too, but only for MPE. */
if (pc & 0x2)
- pc = (CORE_ADDR) read_memory_integer (pc & ~0x3, 4);
+ pc = (CORE_ADDR) read_memory_integer (pc & ~0x3, TARGET_PTR_BIT / 8);
}
if (pc == dyncall_external)
{
pc = (CORE_ADDR) read_register (22);
- pc = (CORE_ADDR) read_memory_integer (pc & ~0x3, 4);
+ pc = (CORE_ADDR) read_memory_integer (pc & ~0x3, TARGET_PTR_BIT / 8);
}
else if (pc == sr4export)
pc = (CORE_ADDR) (read_register (22));
else if ((curr_inst & 0xffe0f000) == 0xe840d000)
{
return (read_memory_integer
- (read_register (SP_REGNUM) - 24, 4)) & ~0x3;
+ (read_register (SP_REGNUM) - 24, TARGET_PTR_BIT / 8)) & ~0x3;
}
/* What about be,n 0(sr0,%rp)? It's just another way we return to
I guess we could check for the previous instruction being
mtsp %r1,%sr0 if we want to do sanity checking. */
return (read_memory_integer
- (read_register (SP_REGNUM) - 24, 4)) & ~0x3;
+ (read_register (SP_REGNUM) - 24, TARGET_PTR_BIT / 8)) & ~0x3;
}
/* Haven't found the branch yet, but we're still in the stub.
instead, let find_dummy_frame_regs fill in the correct offsets
for the saved registers. */
if ((frame_info->pc >= frame_info->frame
- && frame_info->pc <= (frame_info->frame + CALL_DUMMY_LENGTH
- + 32 * 4 + (NUM_REGS - FP0_REGNUM) * 8
- + 6 * 4)))
+ && frame_info->pc <= (frame_info->frame
+ /* A call dummy is sized in words, but it is
+ actually a series of instructions. Account
+ for that scaling factor. */
+ + ((REGISTER_SIZE / INSTRUCTION_SIZE)
+ * CALL_DUMMY_LENGTH)
+ /* Similarly we have to account for 64bit
+ wide register saves. */
+ + (32 * REGISTER_SIZE)
+ /* We always consider FP regs 8 bytes long. */
+ + (NUM_REGS - FP0_REGNUM) * 8
+ /* Similarly we have to account for 64bit
+ wide register saves. */
+ + (6 * REGISTER_SIZE))))
find_dummy_frame_regs (frame_info, frame_saved_regs);
/* Interrupt handlers are special too. They lay out the register
/* SP is a little special. */
if (i == SP_REGNUM)
frame_saved_regs->regs[SP_REGNUM]
- = read_memory_integer (frame_info->frame + SP_REGNUM * 4, 4);
+ = read_memory_integer (frame_info->frame + SP_REGNUM * 4,
+ TARGET_PTR_BIT / 8);
else
frame_saved_regs->regs[i] = frame_info->frame + i * 4;
}
return 0;
}
+#ifndef GDB_TARGET_IS_HPPA_20W
/* Check whether the executable is dynamically linked or archive bound */
/* With an archive-bound executable we can use the raw addresses we find
for the callback function, etc. without modification. For an executable
}
else
exception_catchpoints_are_fragile = 0;
+#endif
/* Now, look for the breakpointable routine in end.o */
/* This should also be available in the SOM symbol dict. if end.o linked in */
projects / deliverable / binutils-gdb.git / blobdiff