-/* Target-dependent code for Linux running on i386's, for GDB.
- Copyright (C) 2000 Free Software Foundation, Inc.
+/* Target-dependent code for GNU/Linux running on i386's, for GDB.
+
+ Copyright 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
This file is part of GDB.
#include "gdbcore.h"
#include "frame.h"
#include "value.h"
+#include "regcache.h"
+#include "inferior.h"
+#include "reggroups.h"
/* For i386_linux_skip_solib_resolver. */
#include "symtab.h"
#include "symfile.h"
#include "objfiles.h"
+#include "solib-svr4.h" /* For struct link_map_offsets. */
+
+#include "osabi.h"
+
+#include "i386-tdep.h"
+#include "i386-linux-tdep.h"
+
+/* Return the name of register REG. */
+
+static const char *
+i386_linux_register_name (int reg)
+{
+ /* Deal with the extra "orig_eax" pseudo register. */
+ if (reg == I386_LINUX_ORIG_EAX_REGNUM)
+ return "orig_eax";
+
+ return i386_register_name (reg);
+}
+
+/* Return non-zero, when the register is in the corresponding register
+ group. Put the LINUX_ORIG_EAX register in the system group. */
+static int
+i386_linux_register_reggroup_p (struct gdbarch *gdbarch, int regnum,
+ struct reggroup *group)
+{
+ if (regnum == I386_LINUX_ORIG_EAX_REGNUM)
+ return (group == system_reggroup
+ || group == save_reggroup
+ || group == restore_reggroup);
+ return i386_register_reggroup_p (gdbarch, regnum, group);
+}
+
\f
/* Recognizing signal handler frames. */
-/* Linux has two flavors of signals. Normal signal handlers, and
+/* GNU/Linux has two flavors of signals. Normal signal handlers, and
"realtime" (RT) signals. The RT signals can provide additional
information to the signal handler if the SA_SIGINFO flag is set
when establishing a signal handler using `sigaction'. It is not
- unlikely that future versions of Linux will support SA_SIGINFO for
- normal signals too. */
+ unlikely that future versions of GNU/Linux will support SA_SIGINFO
+ for normal signals too. */
/* When the i386 Linux kernel calls a signal handler and the
SA_RESTORER flag isn't set, the return address points to a bit of
It kind of sucks that we have to read memory from the process in
order to identify a signal trampoline, but there doesn't seem to be
- any other way. The IN_SIGTRAMP macro in tm-linux.h arranges to
+ any other way. The PC_IN_SIGTRAMP macro in tm-linux.h arranges to
only call us if no function name could be identified, which should
be the case since the code is on the stack.
return pc;
}
-/* Return whether PC is in a Linux sigtramp routine. */
+/* Return whether PC is in a GNU/Linux sigtramp routine. */
-int
-i386_linux_in_sigtramp (CORE_ADDR pc, char *name)
+static int
+i386_linux_pc_in_sigtramp (CORE_ADDR pc, char *name)
{
- if (name)
- return STREQ ("__restore", name) || STREQ ("__restore_rt", name);
-
- return (i386_linux_sigtramp_start (pc) != 0
- || i386_linux_rt_sigtramp_start (pc) != 0);
+ /* If we have NAME, we can optimize the search. The trampolines are
+ named __restore and __restore_rt. However, they aren't dynamically
+ exported from the shared C library, so the trampoline may appear to
+ be part of the preceding function. This should always be sigaction,
+ __sigaction, or __libc_sigaction (all aliases to the same function). */
+ if (name == NULL || strstr (name, "sigaction") != NULL)
+ return (i386_linux_sigtramp_start (pc) != 0
+ || i386_linux_rt_sigtramp_start (pc) != 0);
+
+ return (strcmp ("__restore", name) == 0
+ || strcmp ("__restore_rt", name) == 0);
}
-/* Assuming FRAME is for a Linux sigtramp routine, return the address
- of the associated sigcontext structure. */
+/* Assuming FRAME is for a GNU/Linux sigtramp routine, return the
+ address of the associated sigcontext structure. */
-CORE_ADDR
+static CORE_ADDR
i386_linux_sigcontext_addr (struct frame_info *frame)
{
CORE_ADDR pc;
- pc = i386_linux_sigtramp_start (frame->pc);
+ pc = i386_linux_sigtramp_start (get_frame_pc (frame));
if (pc)
{
CORE_ADDR sp;
- if (frame->next)
+ if (get_next_frame (frame))
/* If this isn't the top frame, the next frame must be for the
signal handler itself. The sigcontext structure lives on
the stack, right after the signum argument. */
- return frame->next->frame + 12;
+ return get_frame_base (get_next_frame (frame)) + 12;
/* This is the top frame. We'll have to find the address of the
sigcontext structure by looking at the stack pointer. Keep
"pop %eax". If the PC is at this instruction, adjust the
returned value accordingly. */
sp = read_register (SP_REGNUM);
- if (pc == frame->pc)
+ if (pc == get_frame_pc (frame))
return sp + 4;
return sp;
}
- pc = i386_linux_rt_sigtramp_start (frame->pc);
+ pc = i386_linux_rt_sigtramp_start (get_frame_pc (frame));
if (pc)
{
- if (frame->next)
+ if (get_next_frame (frame))
/* If this isn't the top frame, the next frame must be for the
signal handler itself. The sigcontext structure is part of
the user context. A pointer to the user context is passed
as the third argument to the signal handler. */
- return read_memory_integer (frame->next->frame + 16, 4) + 20;
+ return read_memory_integer (get_frame_base (get_next_frame (frame))
+ + 16, 4) + 20;
/* This is the top frame. Again, use the stack pointer to find
the address of the sigcontext structure. */
return 0;
}
-/* Offset to saved PC in sigcontext, from <asm/sigcontext.h>. */
-#define LINUX_SIGCONTEXT_PC_OFFSET (56)
-
-/* Assuming FRAME is for a Linux sigtramp routine, return the saved
- program counter. */
+/* Set the program counter for process PTID to PC. */
-CORE_ADDR
-i386_linux_sigtramp_saved_pc (struct frame_info *frame)
-{
- CORE_ADDR addr;
- addr = i386_linux_sigcontext_addr (frame);
- return read_memory_integer (addr + LINUX_SIGCONTEXT_PC_OFFSET, 4);
-}
-
-/* Offset to saved SP in sigcontext, from <asm/sigcontext.h>. */
-#define LINUX_SIGCONTEXT_SP_OFFSET (28)
-
-/* Assuming FRAME is for a Linux sigtramp routine, return the saved
- stack pointer. */
-
-CORE_ADDR
-i386_linux_sigtramp_saved_sp (struct frame_info *frame)
+static void
+i386_linux_write_pc (CORE_ADDR pc, ptid_t ptid)
{
- CORE_ADDR addr;
- addr = i386_linux_sigcontext_addr (frame);
- return read_memory_integer (addr + LINUX_SIGCONTEXT_SP_OFFSET, 4);
+ write_register_pid (PC_REGNUM, pc, ptid);
+
+ /* We must be careful with modifying the program counter. If we
+ just interrupted a system call, the kernel might try to restart
+ it when we resume the inferior. On restarting the system call,
+ the kernel will try backing up the program counter even though it
+ no longer points at the system call. This typically results in a
+ SIGSEGV or SIGILL. We can prevent this by writing `-1' in the
+ "orig_eax" pseudo-register.
+
+ Note that "orig_eax" is saved when setting up a dummy call frame.
+ This means that it is properly restored when that frame is
+ popped, and that the interrupted system call will be restarted
+ when we resume the inferior on return from a function call from
+ within GDB. In all other cases the system call will not be
+ restarted. */
+ write_register_pid (I386_LINUX_ORIG_EAX_REGNUM, -1, ptid);
}
-
-/* Immediately after a function call, return the saved pc. */
-
-CORE_ADDR
-i386_linux_saved_pc_after_call (struct frame_info *frame)
-{
- if (frame->signal_handler_caller)
- return i386_linux_sigtramp_saved_pc (frame);
-
- return read_memory_integer (read_register (SP_REGNUM), 4);
-}
-
\f
-
/* Calling functions in shared libraries. */
+
/* Find the minimal symbol named NAME, and return both the minsym
struct and its objfile. This probably ought to be in minsym.c, but
everything there is trying to deal with things like C++ and
ALL_OBJFILE_MSYMBOLS (objfile, msym)
{
- if (SYMBOL_NAME (msym)
- && STREQ (SYMBOL_NAME (msym), name))
+ if (SYMBOL_LINKAGE_NAME (msym)
+ && strcmp (SYMBOL_LINKAGE_NAME (msym), name) == 0)
{
*objfile_p = objfile;
return msym;
It's kind of gross to do all these checks every time we're
called, since they don't change once the executable has gotten
started. But this is only a temporary hack --- upcoming versions
- of Linux will provide a portable, efficient interface for
+ of GNU/Linux will provide a portable, efficient interface for
debugging programs that use shared libraries. */
struct objfile *objfile;
if (resolver)
{
struct minimal_symbol *fixup
- = lookup_minimal_symbol ("fixup", 0, objfile);
+ = lookup_minimal_symbol ("fixup", NULL, objfile);
if (fixup && SYMBOL_VALUE_ADDRESS (fixup) == pc)
- return (SAVED_PC_AFTER_CALL (get_current_frame ()));
+ return (DEPRECATED_SAVED_PC_AFTER_CALL (get_current_frame ()));
}
return 0;
return 0;
}
+
+/* Fetch (and possibly build) an appropriate link_map_offsets
+ structure for native GNU/Linux x86 targets using the struct offsets
+ defined in link.h (but without actual reference to that file).
+
+ This makes it possible to access GNU/Linux x86 shared libraries
+ from a GDB that was not built on an GNU/Linux x86 host (for cross
+ debugging). */
+
+static struct link_map_offsets *
+i386_linux_svr4_fetch_link_map_offsets (void)
+{
+ static struct link_map_offsets lmo;
+ static struct link_map_offsets *lmp = NULL;
+
+ if (lmp == NULL)
+ {
+ lmp = &lmo;
+
+ lmo.r_debug_size = 8; /* The actual size is 20 bytes, but
+ this is all we need. */
+ lmo.r_map_offset = 4;
+ lmo.r_map_size = 4;
+
+ lmo.link_map_size = 20; /* The actual size is 552 bytes, but
+ this is all we need. */
+ lmo.l_addr_offset = 0;
+ lmo.l_addr_size = 4;
+
+ lmo.l_name_offset = 4;
+ lmo.l_name_size = 4;
+
+ lmo.l_next_offset = 12;
+ lmo.l_next_size = 4;
+
+ lmo.l_prev_offset = 16;
+ lmo.l_prev_size = 4;
+ }
+
+ return lmp;
+}
+\f
+
+static void
+i386_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
+ /* GNU/Linux uses ELF. */
+ i386_elf_init_abi (info, gdbarch);
+
+ /* We support the SSE registers on GNU/Linux. */
+ tdep->num_xmm_regs = I386_NUM_XREGS - 1;
+ /* set_gdbarch_num_regs (gdbarch, I386_SSE_NUM_REGS); */
+
+ /* Since we have the extra "orig_eax" register on GNU/Linux, we have
+ to adjust a few things. */
+
+ set_gdbarch_write_pc (gdbarch, i386_linux_write_pc);
+ set_gdbarch_num_regs (gdbarch, I386_SSE_NUM_REGS + 1);
+ set_gdbarch_register_name (gdbarch, i386_linux_register_name);
+ set_gdbarch_register_reggroup_p (gdbarch, i386_linux_register_reggroup_p);
+ set_gdbarch_register_bytes (gdbarch, I386_SSE_SIZEOF_REGS + 4);
+
+ tdep->jb_pc_offset = 20; /* From <bits/setjmp.h>. */
+
+ tdep->sigcontext_addr = i386_linux_sigcontext_addr;
+ tdep->sc_pc_offset = 14 * 4; /* From <asm/sigcontext.h>. */
+ tdep->sc_sp_offset = 7 * 4;
+
+ /* When the i386 Linux kernel calls a signal handler, the return
+ address points to a bit of code on the stack. This function is
+ used to identify this bit of code as a signal trampoline in order
+ to support backtracing through calls to signal handlers. */
+ set_gdbarch_pc_in_sigtramp (gdbarch, i386_linux_pc_in_sigtramp);
+
+ set_solib_svr4_fetch_link_map_offsets (gdbarch,
+ i386_linux_svr4_fetch_link_map_offsets);
+}
+
+/* Provide a prototype to silence -Wmissing-prototypes. */
+extern void _initialize_i386_linux_tdep (void);
+
+void
+_initialize_i386_linux_tdep (void)
+{
+ gdbarch_register_osabi (bfd_arch_i386, 0, GDB_OSABI_LINUX,
+ i386_linux_init_abi);
+}
projects / deliverable / binutils-gdb.git / blobdiff