struct i386_frame_cache *cache)
{
unsigned char op;
+ int skip = 0;
if (current_pc <= pc)
return current_pc;
if (current_pc <= pc + 1)
return current_pc;
- /* Check for `movl %esp, %ebp' -- can be written in two ways. */
op = read_memory_unsigned_integer (pc + 1, 1);
+
+ /* Check for some special instructions that might be migrated
+ by GCC into the prologue. We check for
+
+ xorl %ebx, %ebx
+ xorl %ecx, %ecx
+ xorl %edx, %edx
+
+ and the equivalent
+
+ subl %ebx, %ebx
+ subl %ecx, %ecx
+ subl %edx, %edx
+
+ Make sure we only skip these instructions if we later see the
+ `movl %esp, %ebp' that actually sets up the frame. */
+ while (op == 0x29 || op == 0x31)
+ {
+ op = read_memory_unsigned_integer (pc + skip + 2, 1);
+ switch (op)
+ {
+ case 0xdb: /* %ebx */
+ case 0xc9: /* %ecx */
+ case 0xd2: /* %edx */
+ skip += 2;
+ break;
+ default:
+ return pc + 1;
+ }
+
+ op = read_memory_unsigned_integer (pc + skip + 1, 1);
+ }
+
+ /* Check for `movl %esp, %ebp' -- can be written in two ways. */
switch (op)
{
case 0x8b:
- if (read_memory_unsigned_integer (pc + 2, 1) != 0xec)
+ if (read_memory_unsigned_integer (pc + skip + 2, 1) != 0xec)
return pc + 1;
break;
case 0x89:
- if (read_memory_unsigned_integer (pc + 2, 1) != 0xe5)
+ if (read_memory_unsigned_integer (pc + skip + 2, 1) != 0xe5)
return pc + 1;
break;
default:
return pc + 1;
}
- /* OK, we actually have a frame. We just don't know how large it is
- yet. Set its size to zero. We'll adjust it if necessary. */
+ /* OK, we actually have a frame. We just don't know how large
+ it is yet. Set its size to zero. We'll adjust it if
+ necessary. We also now commit to skipping the special
+ instructions mentioned before. */
cache->locals = 0;
+ pc += skip;
/* If that's all, return now. */
if (current_pc <= pc + 3)
i386_analyze_register_saves (CORE_ADDR pc, CORE_ADDR current_pc,
struct i386_frame_cache *cache)
{
- if (cache->locals >= 0)
- {
- CORE_ADDR offset;
- unsigned char op;
- int i;
+ CORE_ADDR offset = 0;
+ unsigned char op;
+ int i;
- offset = - 4 - cache->locals;
- for (i = 0; i < 8 && pc < current_pc; i++)
- {
- op = read_memory_unsigned_integer (pc, 1);
- if (op < 0x50 || op > 0x57)
- break;
+ if (cache->locals > 0)
+ offset -= cache->locals;
+ for (i = 0; i < 8 && pc < current_pc; i++)
+ {
+ op = read_memory_unsigned_integer (pc, 1);
+ if (op < 0x50 || op > 0x57)
+ break;
- cache->saved_regs[op - 0x50] = offset;
- offset -= 4;
- pc++;
- }
+ offset -= 4;
+ cache->saved_regs[op - 0x50] = offset;
+ cache->sp_offset += 4;
+ pc++;
}
return pc;
ULONGEST val;
/* Clear the direction flag. */
- frame_unwind_unsigned_register (next_frame, PS_REGNUM, &val);
+ val = frame_unwind_register_unsigned (next_frame,
+ I386_EFLAGS_REGNUM);
val &= ~(1 << 10);
store_unsigned_integer (valuep, 4, val);
}
if (jb_pc_offset == -1)
return 0;
- sp = read_register (SP_REGNUM);
+ /* Don't use I386_ESP_REGNUM here, since this function is also used
+ for AMD64. */
+ regcache_cooked_read (current_regcache, SP_REGNUM, buf);
+ sp = extract_typed_address (buf, builtin_type_void_data_ptr);
if (target_read_memory (sp + len, buf, len))
return 0;
- jb_addr = extract_typed_address (buf, builtin_type_void_func_ptr);
+ jb_addr = extract_typed_address (buf, builtin_type_void_data_ptr);
if (target_read_memory (jb_addr + jb_pc_offset, buf, len))
return 0;
}
else
{
- int low_size = REGISTER_RAW_SIZE (LOW_RETURN_REGNUM);
- int high_size = REGISTER_RAW_SIZE (HIGH_RETURN_REGNUM);
+ int low_size = register_size (current_gdbarch, LOW_RETURN_REGNUM);
+ int high_size = register_size (current_gdbarch, HIGH_RETURN_REGNUM);
if (len <= low_size)
{
}
else
{
- int low_size = REGISTER_RAW_SIZE (LOW_RETURN_REGNUM);
- int high_size = REGISTER_RAW_SIZE (HIGH_RETURN_REGNUM);
+ int low_size = register_size (current_gdbarch, LOW_RETURN_REGNUM);
+ int high_size = register_size (current_gdbarch, HIGH_RETURN_REGNUM);
if (len <= low_size)
regcache_raw_write_part (regcache, LOW_RETURN_REGNUM, 0, len, valbuf);
/* Extract (always little endian). */
regcache_raw_read (regcache, fpnum, mmx_buf);
- memcpy (buf, mmx_buf, REGISTER_RAW_SIZE (regnum));
+ memcpy (buf, mmx_buf, register_size (gdbarch, regnum));
}
else
regcache_raw_read (regcache, regnum, buf);
/* Read ... */
regcache_raw_read (regcache, fpnum, mmx_buf);
/* ... Modify ... (always little endian). */
- memcpy (mmx_buf, buf, REGISTER_RAW_SIZE (regnum));
+ memcpy (mmx_buf, buf, register_size (gdbarch, regnum));
/* ... Write. */
regcache_raw_write (regcache, fpnum, mmx_buf);
}
gdb_assert (regnum != -1);
gdb_assert (register_size (current_gdbarch, regnum) == 4);
- frame_read_register (frame, regnum, buf);
+ get_frame_register (frame, regnum, buf);
regnum = i386_next_regnum (regnum);
len -= 4;
buf += 4;
}
\f
-/* Get the ith function argument for the current function. */
+/* Get the ARGIth function argument for the current function. */
+
static CORE_ADDR
i386_fetch_pointer_argument (struct frame_info *frame, int argi,
struct type *type)
{
- CORE_ADDR stack;
- frame_read_register (frame, SP_REGNUM, &stack);
- return read_memory_unsigned_integer (stack + (4 * (argi + 1)), 4);
+ CORE_ADDR sp = get_frame_register_unsigned (frame, I386_ESP_REGNUM);
+ return read_memory_unsigned_integer (sp + (4 * (argi + 1)), 4);
}
\f
tdep = XMALLOC (struct gdbarch_tdep);
gdbarch = gdbarch_alloc (&info, tdep);
- /* The i386 default settings don't include the SSE registers.
+ /* The i386 default settings now include the SSE registers.
+ I386_NUM_XREGS includes mxcsr, and we don't want to count
+ this as one of the xmm regs -- which is why we subtract one.
+
+ Note: kevinb/2003-07-14: Whatever Mark's concerns are about the
+ FPU registers in the FIXME below apply to the SSE registers as well.
+ The only problem that I see is that these registers will show up
+ in "info all-registers" even on CPUs where they don't exist. IMO,
+ however, if it's a choice between printing them always (even when
+ they don't exist) or never showing them to the user (even when they
+ do exist), I prefer the former over the latter. Ideally, of course,
+ we'd somehow autodetect that we have them (or not) and display them
+ when we have them and suppress them when we don't.
+
FIXME: kettenis/20020614: They do include the FPU registers for
now, which probably is not quite right. */
- tdep->num_xmm_regs = 0;
+ tdep->num_xmm_regs = I386_NUM_XREGS - 1;
tdep->jb_pc_offset = -1;
tdep->struct_return = pcc_struct_return;
alignment. */
set_gdbarch_long_double_bit (gdbarch, 96);
- /* The default ABI includes general-purpose registers and
- floating-point registers. */
- set_gdbarch_num_regs (gdbarch, I386_NUM_GREGS + I386_NUM_FREGS);
+ /* The default ABI includes general-purpose registers,
+ floating-point registers, and the SSE registers. */
+ set_gdbarch_num_regs (gdbarch, I386_SSE_NUM_REGS);
set_gdbarch_register_name (gdbarch, i386_register_name);
set_gdbarch_register_type (gdbarch, i386_register_type);
projects / deliverable / binutils-gdb.git / blobdiff