/* Target-machine dependent code for the Intel 960
- Copyright (C) 1991 Free Software Foundation, Inc.
+ Copyright 1991, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
Contributed by Intel Corporation.
examine_prologue and other parts contributed by Wind River Systems.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-
-/* Miscellaneous i80960-dependent routines.
- Most are called from macros defined in "tm-i960.h". */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include "defs.h"
-#include <signal.h>
#include "symtab.h"
#include "value.h"
#include "frame.h"
-#include "ieee-float.h"
-
-/* Structure of i960 extended floating point format. */
+#include "floatformat.h"
+#include "target.h"
+#include "gdbcore.h"
-const struct ext_format ext_format_i960 = {
-/* tot sbyte smask expbyte manbyte */
- 12, 9, 0x80, 9,8, 4,0, /* i960 */
-};
+static CORE_ADDR next_insn PARAMS ((CORE_ADDR memaddr,
+ unsigned int *pword1,
+ unsigned int *pword2));
/* gdb960 is always running on a non-960 host. Check its characteristics.
This routine must be called as part of gdb initialization. */
*/
for ( i = 0; i < TYPELEN; i++ ){
if ( types[i].hostsize != types[i].i960size ){
- printf("sizeof(%s) != %d: PROCEED AT YOUR OWN RISK!\n",
+ printf_unfiltered("sizeof(%s) != %d: PROCEED AT YOUR OWN RISK!\n",
types[i].typename, types[i].i960size );
}
examine_prologue (ip, limit, frame_addr, fsr)
register CORE_ADDR ip;
register CORE_ADDR limit;
- FRAME_ADDR frame_addr;
+ CORE_ADDR frame_addr;
struct frame_saved_regs *fsr;
{
register CORE_ADDR next_ip;
sal = find_pc_line (ip, 0);
limit = (sal.end) ? sal.end : 0xffffffff;
- return (examine_prologue (ip, limit, (FRAME_ADDR) 0, &saved_regs_dummy));
+ return (examine_prologue (ip, limit, (CORE_ADDR) 0, &saved_regs_dummy));
}
/* Put here the code to store, into a struct frame_saved_regs,
cache_fsr = (struct frame_saved_regs *)
obstack_alloc (&frame_cache_obstack,
sizeof (struct frame_saved_regs));
- bzero (cache_fsr, sizeof (struct frame_saved_regs));
+ memset (cache_fsr, '\0', sizeof (struct frame_saved_regs));
fi->fsr = cache_fsr;
/* Find the start and end of the function prologue. If the PC
frame_args_address (fi, must_be_correct)
struct frame_info *fi;
{
- register FRAME frame;
struct frame_saved_regs fsr;
CORE_ADDR ap;
the saved value. If the frame is current and we are being sloppy,
return the value of g14. Otherwise, return zero. */
- frame = FRAME_INFO_ID (fi);
get_frame_saved_regs (fi, &fsr);
if (fsr.regs[G14_REGNUM])
ap = read_memory_integer (fsr.regs[G14_REGNUM],4);
- else {
- if (must_be_correct)
- return 0; /* Don't cache this result */
- if (get_next_frame (frame))
- ap = 0;
- else
- ap = read_register (G14_REGNUM);
- if (ap == 0)
- ap = fi->frame;
- }
+ else
+ {
+ if (must_be_correct)
+ return 0; /* Don't cache this result */
+ if (get_next_frame (fi))
+ ap = 0;
+ else
+ ap = read_register (G14_REGNUM);
+ if (ap == 0)
+ ap = fi->frame;
+ }
fi->arg_pointer = ap; /* Cache it for next time */
return ap;
}
frame_struct_result_address (fi)
struct frame_info *fi;
{
- register FRAME frame;
struct frame_saved_regs fsr;
CORE_ADDR ap;
the function prologue, and only use the current value if we have
no saved value and are at TOS? -- gnu@cygnus.com */
- frame = FRAME_INFO_ID (fi);
- if (get_next_frame (frame)) {
- get_frame_saved_regs (fi, &fsr);
- if (fsr.regs[G13_REGNUM])
- ap = read_memory_integer (fsr.regs[G13_REGNUM],4);
- else
- ap = 0;
- } else {
+ if (get_next_frame (fi))
+ {
+ get_frame_saved_regs (fi, &fsr);
+ if (fsr.regs[G13_REGNUM])
+ ap = read_memory_integer (fsr.regs[G13_REGNUM],4);
+ else
+ ap = 0;
+ }
+ else
ap = read_register (G13_REGNUM);
- }
+
return ap;
}
int dst;
unsigned int insn1, insn2;
CORE_ADDR return_addr;
- char *index ();
if ((msymbol = lookup_minimal_symbol_by_pc (ip)) != NULL)
{
- if ((p = index (SYMBOL_NAME (msymbol), '.')) && STREQ (p, ".lf"))
+ if ((p = strchr(SYMBOL_NAME (msymbol), '.')) && STREQ (p, ".lf"))
{
if (next_insn (SYMBOL_VALUE_ADDRESS (msymbol), &insn1, &insn2)
&& (insn1 & 0xff87ffff) == 0x5c80161e /* mov g14, gx */
CORE_ADDR
saved_pc_after_call (frame)
- FRAME frame;
+ struct frame_info *frame;
{
CORE_ADDR saved_pc;
- CORE_ADDR get_frame_pc ();
saved_pc = leafproc_return (get_frame_pc (frame));
if (!saved_pc)
saved_pc = FRAME_SAVED_PC (frame);
- return (saved_pc);
+ return saved_pc;
}
/* Discard from the stack the innermost frame,
struct frame_saved_regs fsr;
char local_regs_buf[16 * 4];
- current_fi = get_frame_info (get_current_frame ());
+ current_fi = get_current_frame ();
/* First, undo what the hardware does when we return.
If this is a non-leaf procedure, restore local registers from
if (!leaf_return_addr)
{
/* Non-leaf procedure. Restore local registers, incl IP. */
- prev_fi = get_frame_info (get_prev_frame (FRAME_INFO_ID (current_fi)));
+ prev_fi = get_prev_frame (current_fi);
read_memory (prev_fi->frame, local_regs_buf, sizeof (local_regs_buf));
write_register_bytes (REGISTER_BYTE (R0_REGNUM), local_regs_buf,
sizeof (local_regs_buf));
and make it the current frame. */
flush_cached_frames ();
- set_current_frame (create_new_frame (read_register (FP_REGNUM), read_pc ()));
}
-/* Print out text describing a "signal number" with which the i80960 halted.
-
- See the file "fault.c" in the nindy monitor source code for a list
- of stop codes. */
+/* Given a 960 stop code (fault or trace), return the signal which
+ corresponds. */
-void
-print_fault( siggnal )
- int siggnal; /* Signal number, as returned by target_wait() */
+enum target_signal
+i960_fault_to_signal (fault)
+ int fault;
{
- static char unknown[] = "Unknown fault or trace";
- static char *sigmsgs[] = {
- /* FAULTS */
- "parallel fault", /* 0x00 */
- unknown, /* 0x01 */
- "operation fault", /* 0x02 */
- "arithmetic fault", /* 0x03 */
- "floating point fault", /* 0x04 */
- "constraint fault", /* 0x05 */
- "virtual memory fault", /* 0x06 */
- "protection fault", /* 0x07 */
- "machine fault", /* 0x08 */
- "structural fault", /* 0x09 */
- "type fault", /* 0x0a */
- "reserved (0xb) fault", /* 0x0b */
- "process fault", /* 0x0c */
- "descriptor fault", /* 0x0d */
- "event fault", /* 0x0e */
- "reserved (0xf) fault", /* 0x0f */
-
- /* TRACES */
- "single-step trace", /* 0x10 */
- "branch trace", /* 0x11 */
- "call trace", /* 0x12 */
- "return trace", /* 0x13 */
- "pre-return trace", /* 0x14 */
- "supervisor call trace",/* 0x15 */
- "breakpoint trace", /* 0x16 */
+ switch (fault)
+ {
+ case 0: return TARGET_SIGNAL_BUS; /* parallel fault */
+ case 1: return TARGET_SIGNAL_UNKNOWN;
+ case 2: return TARGET_SIGNAL_ILL; /* operation fault */
+ case 3: return TARGET_SIGNAL_FPE; /* arithmetic fault */
+ case 4: return TARGET_SIGNAL_FPE; /* floating point fault */
+
+ /* constraint fault. This appears not to distinguish between
+ a range constraint fault (which should be SIGFPE) and a privileged
+ fault (which should be SIGILL). */
+ case 5: return TARGET_SIGNAL_ILL;
+
+ case 6: return TARGET_SIGNAL_SEGV; /* virtual memory fault */
+
+ /* protection fault. This is for an out-of-range argument to
+ "calls". I guess it also could be SIGILL. */
+ case 7: return TARGET_SIGNAL_SEGV;
+
+ case 8: return TARGET_SIGNAL_BUS; /* machine fault */
+ case 9: return TARGET_SIGNAL_BUS; /* structural fault */
+ case 0xa: return TARGET_SIGNAL_ILL; /* type fault */
+ case 0xb: return TARGET_SIGNAL_UNKNOWN; /* reserved fault */
+ case 0xc: return TARGET_SIGNAL_BUS; /* process fault */
+ case 0xd: return TARGET_SIGNAL_SEGV; /* descriptor fault */
+ case 0xe: return TARGET_SIGNAL_BUS; /* event fault */
+ case 0xf: return TARGET_SIGNAL_UNKNOWN; /* reserved fault */
+ case 0x10: return TARGET_SIGNAL_TRAP; /* single-step trace */
+ case 0x11: return TARGET_SIGNAL_TRAP; /* branch trace */
+ case 0x12: return TARGET_SIGNAL_TRAP; /* call trace */
+ case 0x13: return TARGET_SIGNAL_TRAP; /* return trace */
+ case 0x14: return TARGET_SIGNAL_TRAP; /* pre-return trace */
+ case 0x15: return TARGET_SIGNAL_TRAP; /* supervisor call trace */
+ case 0x16: return TARGET_SIGNAL_TRAP; /* breakpoint trace */
+ default: return TARGET_SIGNAL_UNKNOWN;
+ }
+}
+
+/****************************************/
+/* MEM format */
+/****************************************/
+
+struct tabent {
+ char *name;
+ char numops;
+};
+
+static int /* returns instruction length: 4 or 8 */
+mem( memaddr, word1, word2, noprint )
+ unsigned long memaddr;
+ unsigned long word1, word2;
+ int noprint; /* If TRUE, return instruction length, but
+ don't output any text. */
+{
+ int i, j;
+ int len;
+ int mode;
+ int offset;
+ const char *reg1, *reg2, *reg3;
+
+ /* This lookup table is too sparse to make it worth typing in, but not
+ * so large as to make a sparse array necessary. We allocate the
+ * table at runtime, initialize all entries to empty, and copy the
+ * real ones in from an initialization table.
+ *
+ * NOTE: In this table, the meaning of 'numops' is:
+ * 1: single operand
+ * 2: 2 operands, load instruction
+ * -2: 2 operands, store instruction
+ */
+ static struct tabent *mem_tab = NULL;
+/* Opcodes of 0x8X, 9X, aX, bX, and cX must be in the table. */
+#define MEM_MIN 0x80
+#define MEM_MAX 0xcf
+#define MEM_SIZ ((MEM_MAX-MEM_MIN+1) * sizeof(struct tabent))
+
+ static struct { int opcode; char *name; char numops; } mem_init[] = {
+ 0x80, "ldob", 2,
+ 0x82, "stob", -2,
+ 0x84, "bx", 1,
+ 0x85, "balx", 2,
+ 0x86, "callx", 1,
+ 0x88, "ldos", 2,
+ 0x8a, "stos", -2,
+ 0x8c, "lda", 2,
+ 0x90, "ld", 2,
+ 0x92, "st", -2,
+ 0x98, "ldl", 2,
+ 0x9a, "stl", -2,
+ 0xa0, "ldt", 2,
+ 0xa2, "stt", -2,
+ 0xb0, "ldq", 2,
+ 0xb2, "stq", -2,
+ 0xc0, "ldib", 2,
+ 0xc2, "stib", -2,
+ 0xc8, "ldis", 2,
+ 0xca, "stis", -2,
+ 0, NULL, 0
};
-# define NUMMSGS ((int)( sizeof(sigmsgs) / sizeof(sigmsgs[0]) ))
- if (siggnal < NSIG) {
- printf ("\nProgram received signal %d, %s\n",
- siggnal, safe_strsignal (siggnal));
+ if ( mem_tab == NULL ){
+ mem_tab = (struct tabent *) xmalloc( MEM_SIZ );
+ memset( mem_tab, '\0', MEM_SIZ );
+ for ( i = 0; mem_init[i].opcode != 0; i++ ){
+ j = mem_init[i].opcode - MEM_MIN;
+ mem_tab[j].name = mem_init[i].name;
+ mem_tab[j].numops = mem_init[i].numops;
+ }
+ }
+
+ i = ((word1 >> 24) & 0xff) - MEM_MIN;
+ mode = (word1 >> 10) & 0xf;
+
+ if ( (mem_tab[i].name != NULL) /* Valid instruction */
+ && ((mode == 5) || (mode >=12)) ){ /* With 32-bit displacement */
+ len = 8;
} else {
- /* The various target_wait()s bias the 80960 "signal number"
- by adding NSIG to it, so it won't get confused with any
- of the Unix signals elsewhere in GDB. We need to
- "unbias" it before using it. */
- siggnal -= NSIG;
-
- printf("Program stopped for reason #%d: %s.\n", siggnal,
- (siggnal < NUMMSGS && siggnal >= 0)?
- sigmsgs[siggnal] : unknown );
+ len = 4;
+ }
+
+ if ( noprint ){
+ return len;
}
+ abort ();
}
-/* Initialization stub */
+/* Read the i960 instruction at 'memaddr' and return the address of
+ the next instruction after that, or 0 if 'memaddr' is not the
+ address of a valid instruction. The first word of the instruction
+ is stored at 'pword1', and the second word, if any, is stored at
+ 'pword2'. */
+static CORE_ADDR
+next_insn (memaddr, pword1, pword2)
+ unsigned int *pword1, *pword2;
+ CORE_ADDR memaddr;
+{
+ int len;
+ char buf[8];
+
+ /* Read the two (potential) words of the instruction at once,
+ to eliminate the overhead of two calls to read_memory ().
+ FIXME: Loses if the first one is readable but the second is not
+ (e.g. last word of the segment). */
+
+ read_memory (memaddr, buf, 8);
+ *pword1 = extract_unsigned_integer (buf, 4);
+ *pword2 = extract_unsigned_integer (buf + 4, 4);
+
+ /* Divide instruction set into classes based on high 4 bits of opcode*/
+
+ switch ((*pword1 >> 28) & 0xf)
+ {
+ case 0x0:
+ case 0x1: /* ctrl */
+
+ case 0x2:
+ case 0x3: /* cobr */
+
+ case 0x5:
+ case 0x6:
+ case 0x7: /* reg */
+ len = 4;
+ break;
+
+ case 0x8:
+ case 0x9:
+ case 0xa:
+ case 0xb:
+ case 0xc:
+ len = mem (memaddr, *pword1, *pword2, 1);
+ break;
+
+ default: /* invalid instruction */
+ len = 0;
+ break;
+ }
+
+ if (len)
+ return memaddr + len;
+ else
+ return 0;
+}
+
+/* 'start_frame' is a variable in the MON960 runtime startup routine
+ that contains the frame pointer of the 'start' routine (the routine
+ that calls 'main'). By reading its contents out of remote memory,
+ we can tell where the frame chain ends: backtraces should halt before
+ they display this frame. */
+
+int
+mon960_frame_chain_valid (chain, curframe)
+ unsigned int chain;
+ struct frame_info *curframe;
+{
+ struct symbol *sym;
+ struct minimal_symbol *msymbol;
+
+ /* crtmon960.o is an assembler module that is assumed to be linked
+ * first in an i80960 executable. It contains the true entry point;
+ * it performs startup up initialization and then calls 'main'.
+ *
+ * 'sf' is the name of a variable in crtmon960.o that is set
+ * during startup to the address of the first frame.
+ *
+ * 'a' is the address of that variable in 80960 memory.
+ */
+ static char sf[] = "start_frame";
+ CORE_ADDR a;
+
+
+ chain &= ~0x3f; /* Zero low 6 bits because previous frame pointers
+ contain return status info in them. */
+ if ( chain == 0 ){
+ return 0;
+ }
+
+ sym = lookup_symbol(sf, 0, VAR_NAMESPACE, (int *)NULL,
+ (struct symtab **)NULL);
+ if ( sym != 0 ){
+ a = SYMBOL_VALUE (sym);
+ } else {
+ msymbol = lookup_minimal_symbol (sf, NULL, NULL);
+ if (msymbol == NULL)
+ return 0;
+ a = SYMBOL_VALUE_ADDRESS (msymbol);
+ }
+
+ return ( chain != read_memory_integer(a,4) );
+}
+
+void
_initialize_i960_tdep ()
{
check_host ();
+
+ tm_print_insn = print_insn_i960;
}
projects / deliverable / binutils-gdb.git / blobdiff