-/* Low level Unix child interface to ptrace, for GDB when running under Unix.
+/* Low-level child interface to ptrace.
- Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
- 1998, 1999, 2000, 2001, 2002, 2004 Free Software Foundation, Inc.
+ Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
+ 1998, 1999, 2000, 2001, 2002, 2004, 2005, 2006
+ Free Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
#include "defs.h"
-#include "observer.h"
-#include "gdb_ptrace.h"
-#include "inflow.h"
-#include "inferior.h"
-#include "regcache.h"
#include "command.h"
+#include "inferior.h"
+#include "inflow.h"
#include "gdbcore.h"
-#include "inf-child.h"
-#include "gdbcmd.h"
-#include "gdb_string.h"
+#include "regcache.h"
-#include <sys/wait.h>
+#include "gdb_assert.h"
+#include "gdb_string.h"
+#include "gdb_ptrace.h"
+#include "gdb_wait.h"
#include <signal.h>
-/* HACK: Save the ptrace ops returned by ptrace_target. */
-static struct target_ops *ptrace_ops_hack;
-
-static void
-inf_ptrace_kill_inferior (void)
-{
- int status;
- int pid = PIDGET (inferior_ptid);
-
- if (pid == 0)
- return;
-
- /* This once used to call "kill" to kill the inferior just in case
- the inferior was still running. As others have noted in the past
- (kingdon) there shouldn't be any way to get here if the inferior
- is still running -- else there's a major problem elsewere in gdb
- and it needs to be fixed.
-
- The kill call causes problems under hpux10, so it's been removed;
- if this causes problems we'll deal with them as they arise. */
- ptrace (PT_KILL, pid, (PTRACE_TYPE_ARG3) 0, 0);
- wait (&status);
- target_mourn_inferior ();
-}
-
-/* Resume execution of the inferior process. If STEP is nonzero,
- single-step it. If SIGNAL is nonzero, give it that signal. */
-
-static void
-inf_ptrace_resume (ptid_t ptid, int step, enum target_signal signal)
-{
- int request = PT_CONTINUE;
- int pid = PIDGET (ptid);
-
- if (pid == -1)
- /* Resume all threads. */
- /* I think this only gets used in the non-threaded case, where
- "resume all threads" and "resume inferior_ptid" are the
- same. */
- pid = PIDGET (inferior_ptid);
-
- if (step)
- {
- /* If this system does not support PT_STEP, a higher level
- function will have called single_step() to transmute the step
- request into a continue request (by setting breakpoints on
- all possible successor instructions), so we don't have to
- worry about that here. */
- request = PT_STEP;
- }
-
- /* An address of (PTRACE_TYPE_ARG3)1 tells ptrace to continue from
- where it was. If GDB wanted it to start some other way, we have
- already written a new PC value to the child. */
- errno = 0;
- ptrace (request, pid, (PTRACE_TYPE_ARG3) 1, target_signal_to_host (signal));
- if (errno != 0)
- perror_with_name ("ptrace");
-}
-
-/* Set an upper limit on alloca. */
-#define GDB_MAX_ALLOCA 0x1000
-
-/* NOTE! I tried using PTRACE_READDATA, etc., to read and write memory
- in the NEW_SUN_PTRACE case. It ought to be straightforward. But
- it appears that writing did not write the data that I specified. I
- cannot understand where it got the data that it actually did
- write. */
+#include "inf-child.h"
-/* Copy LEN bytes to or from inferior's memory starting at MEMADDR to
- debugger memory starting at MYADDR. Copy to inferior if WRITE is
- nonzero. TARGET is ignored.
+/* HACK: Save the ptrace ops returned by inf_ptrace_target. */
+static struct target_ops *ptrace_ops_hack;
+\f
- Returns the length copied, which is either the LEN argument or
- zero. This xfer function does not do partial moves, since
- ptrace_ops_hack doesn't allow memory operations to cross below us in the
- target stack anyway. */
+#ifdef PT_GET_PROCESS_STATE
-int
-inf_ptrace_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write,
- struct mem_attrib *attrib, struct target_ops *target)
+static int
+inf_ptrace_follow_fork (struct target_ops *ops, int follow_child)
{
- int i;
- /* Round starting address down to longword boundary. */
- CORE_ADDR addr = memaddr & -(CORE_ADDR) sizeof (PTRACE_TYPE_RET);
- /* Round ending address up; get number of longwords that makes. */
- int count = ((((memaddr + len) - addr) + sizeof (PTRACE_TYPE_RET) - 1)
- / sizeof (PTRACE_TYPE_RET));
- int alloc = count * sizeof (PTRACE_TYPE_RET);
- PTRACE_TYPE_RET *buffer;
- struct cleanup *old_chain = NULL;
-
-#ifdef PT_IO
- /* OpenBSD 3.1, NetBSD 1.6 and FreeBSD 5.0 have a new PT_IO request
- that promises to be much more efficient in reading and writing
- data in the traced process's address space. */
+ pid_t pid, fpid;
+ ptrace_state_t pe;
+ /* FIXME: kettenis/20050720: This stuff should really be passed as
+ an argument by our caller. */
{
- struct ptrace_io_desc piod;
+ ptid_t ptid;
+ struct target_waitstatus status;
- /* NOTE: We assume that there are no distinct address spaces for
- instruction and data. */
- piod.piod_op = write ? PIOD_WRITE_D : PIOD_READ_D;
- piod.piod_offs = (void *) memaddr;
- piod.piod_addr = myaddr;
- piod.piod_len = len;
+ get_last_target_status (&ptid, &status);
+ gdb_assert (status.kind == TARGET_WAITKIND_FORKED);
- if (ptrace (PT_IO, PIDGET (inferior_ptid), (caddr_t) &piod, 0) == -1)
- {
- /* If the PT_IO request is somehow not supported, fallback on
- using PT_WRITE_D/PT_READ_D. Otherwise we will return zero
- to indicate failure. */
- if (errno != EINVAL)
- return 0;
- }
- else
- {
- /* Return the actual number of bytes read or written. */
- return piod.piod_len;
- }
+ pid = ptid_get_pid (ptid);
}
-#endif
- /* Allocate buffer of that many longwords. */
- if (len < GDB_MAX_ALLOCA)
- {
- buffer = (PTRACE_TYPE_RET *) alloca (alloc);
- }
- else
- {
- buffer = (PTRACE_TYPE_RET *) xmalloc (alloc);
- old_chain = make_cleanup (xfree, buffer);
- }
+ if (ptrace (PT_GET_PROCESS_STATE, pid,
+ (PTRACE_TYPE_ARG3)&pe, sizeof pe) == -1)
+ perror_with_name (("ptrace"));
- if (write)
- {
- /* Fill start and end extra bytes of buffer with existing memory
- data. */
- if (addr != memaddr || len < (int) sizeof (PTRACE_TYPE_RET))
- {
- /* Need part of initial word -- fetch it. */
- buffer[0] = ptrace (PT_READ_I, PIDGET (inferior_ptid),
- (PTRACE_TYPE_ARG3) addr, 0);
- }
+ gdb_assert (pe.pe_report_event == PTRACE_FORK);
+ fpid = pe.pe_other_pid;
- if (count > 1) /* FIXME, avoid if even boundary. */
- {
- buffer[count - 1] =
- ptrace (PT_READ_I, PIDGET (inferior_ptid),
- ((PTRACE_TYPE_ARG3)
- (addr + (count - 1) * sizeof (PTRACE_TYPE_RET))), 0);
- }
+ if (follow_child)
+ {
+ inferior_ptid = pid_to_ptid (fpid);
+ detach_breakpoints (pid);
- /* Copy data to be written over corresponding part of buffer. */
- memcpy ((char *) buffer + (memaddr & (sizeof (PTRACE_TYPE_RET) - 1)),
- myaddr, len);
+ /* Reset breakpoints in the child as appropriate. */
+ follow_inferior_reset_breakpoints ();
- /* Write the entire buffer. */
- for (i = 0; i < count; i++, addr += sizeof (PTRACE_TYPE_RET))
- {
- errno = 0;
- ptrace (PT_WRITE_D, PIDGET (inferior_ptid),
- (PTRACE_TYPE_ARG3) addr, buffer[i]);
- if (errno)
- {
- /* Using the appropriate one (I or D) is necessary for
- Gould NP1, at least. */
- errno = 0;
- ptrace (PT_WRITE_I, PIDGET (inferior_ptid),
- (PTRACE_TYPE_ARG3) addr, buffer[i]);
- }
- if (errno)
- return 0;
- }
+ if (ptrace (PT_DETACH, pid, (PTRACE_TYPE_ARG3)1, 0) == -1)
+ perror_with_name (("ptrace"));
}
else
{
- /* Read all the longwords. */
- for (i = 0; i < count; i++, addr += sizeof (PTRACE_TYPE_RET))
- {
- errno = 0;
- buffer[i] = ptrace (PT_READ_I, PIDGET (inferior_ptid),
- (PTRACE_TYPE_ARG3) addr, 0);
- if (errno)
- return 0;
- QUIT;
- }
+ inferior_ptid = pid_to_ptid (pid);
+ detach_breakpoints (fpid);
- /* Copy appropriate bytes out of the buffer. */
- memcpy (myaddr,
- (char *) buffer + (memaddr & (sizeof (PTRACE_TYPE_RET) - 1)),
- len);
+ if (ptrace (PT_DETACH, fpid, (PTRACE_TYPE_ARG3)1, 0) == -1)
+ perror_with_name (("ptrace"));
}
- if (old_chain != NULL)
- do_cleanups (old_chain);
- return len;
+ return 0;
}
-/* Wait for child to do something. Return pid of child, or -1 in case
- of error; store status through argument pointer OURSTATUS. */
+#endif /* PT_GET_PROCESS_STATE */
+\f
-static ptid_t
-inf_ptrace_wait (ptid_t ptid, struct target_waitstatus *ourstatus)
-{
- int save_errno;
- int status;
- char *execd_pathname = NULL;
- int exit_status;
- int related_pid;
- int syscall_id;
- enum target_waitkind kind;
- int pid;
+/* Prepare to be traced. */
- do
- {
- set_sigint_trap (); /* Causes SIGINT to be passed on to the
- attached process. */
- set_sigio_trap ();
+static void
+inf_ptrace_me (void)
+{
+ /* "Trace me, Dr. Memory!" */
+ ptrace (PT_TRACE_ME, 0, (PTRACE_TYPE_ARG3)0, 0);
+}
- pid = wait (&status);
+/* Start tracing PID. */
- save_errno = errno;
+static void
+inf_ptrace_him (int pid)
+{
+ push_target (ptrace_ops_hack);
- clear_sigio_trap ();
+ /* On some targets, there must be some explicit synchronization
+ between the parent and child processes after the debugger
+ forks, and before the child execs the debuggee program. This
+ call basically gives permission for the child to exec. */
- clear_sigint_trap ();
+ target_acknowledge_created_inferior (pid);
- if (pid == -1)
- {
- if (save_errno == EINTR)
- continue;
+ /* START_INFERIOR_TRAPS_EXPECTED is defined in inferior.h, and will
+ be 1 or 2 depending on whether we're starting without or with a
+ shell. */
+ startup_inferior (START_INFERIOR_TRAPS_EXPECTED);
- fprintf_unfiltered (gdb_stderr,
- "Child process unexpectedly missing: %s.\n",
- safe_strerror (save_errno));
+ /* On some targets, there must be some explicit actions taken after
+ the inferior has been started up. */
+ target_post_startup_inferior (pid_to_ptid (pid));
+}
- /* Claim it exited with unknown signal. */
- ourstatus->kind = TARGET_WAITKIND_SIGNALLED;
- ourstatus->value.sig = TARGET_SIGNAL_UNKNOWN;
- return pid_to_ptid (-1);
- }
+/* Start a new inferior Unix child process. EXEC_FILE is the file to
+ run, ALLARGS is a string containing the arguments to the program.
+ ENV is the environment vector to pass. If FROM_TTY is non-zero, be
+ chatty about it. */
- /* Did it exit?
- */
- if (target_has_exited (pid, status, &exit_status))
- {
- /* ??rehrauer: For now, ignore this. */
- continue;
- }
+static void
+inf_ptrace_create_inferior (char *exec_file, char *allargs, char **env,
+ int from_tty)
+{
+ fork_inferior (exec_file, allargs, env, inf_ptrace_me, inf_ptrace_him,
+ NULL, NULL);
+}
- if (!target_thread_alive (pid_to_ptid (pid)))
- {
- ourstatus->kind = TARGET_WAITKIND_SPURIOUS;
- return pid_to_ptid (pid);
- }
- }
- while (pid != PIDGET (inferior_ptid)); /* Some other child died or stopped */
+#ifdef PT_GET_PROCESS_STATE
- store_waitstatus (ourstatus, status);
- return pid_to_ptid (pid);
+static void
+inf_ptrace_post_startup_inferior (ptid_t pid)
+{
+ ptrace_event_t pe;
+
+ /* Set the initial event mask. */
+ memset (&pe, 0, sizeof pe);
+ pe.pe_set_event |= PTRACE_FORK;
+ if (ptrace (PT_SET_EVENT_MASK, ptid_get_pid (pid),
+ (PTRACE_TYPE_ARG3)&pe, sizeof pe) == -1)
+ perror_with_name (("ptrace"));
}
-/* Check to see if the given thread is alive.
+#endif
- FIXME: Is kill() ever the right way to do this? I doubt it, but
- for now we're going to try and be compatable with the old thread
- code. */
+/* Clean up a rotting corpse of an inferior after it died. */
-static int
-inf_ptrace_thread_alive (ptid_t ptid)
+static void
+inf_ptrace_mourn_inferior (void)
{
- pid_t pid = PIDGET (ptid);
+ int status;
- return (kill (pid, 0) != -1);
+ /* Wait just one more time to collect the inferior's exit status.
+ Do not check whether this succeeds though, since we may be
+ dealing with a process that we attached to. Such a process will
+ only report its exit status to its original parent. */
+ waitpid (ptid_get_pid (inferior_ptid), &status, 0);
+
+ unpush_target (ptrace_ops_hack);
+ generic_mourn_inferior ();
}
-/* Attach to process PID, then initialize for debugging it. */
+/* Attach to the process specified by ARGS. If FROM_TTY is non-zero,
+ be chatty about it. */
static void
inf_ptrace_attach (char *args, int from_tty)
{
char *exec_file;
- int pid;
+ pid_t pid;
char *dummy;
if (!args)
- error_no_arg ("process-id to attach");
+ error_no_arg (_("process-id to attach"));
dummy = args;
pid = strtol (args, &dummy, 0);
- /* Some targets don't set errno on errors, grrr! */
+ /* Some targets don't set errno on errors, grrr! */
if (pid == 0 && args == dummy)
- error ("Illegal process-id: %s\n", args);
+ error (_("Illegal process-id: %s."), args);
- if (pid == getpid ()) /* Trying to masturbate? */
- error ("I refuse to debug myself!");
+ if (pid == getpid ()) /* Trying to masturbate? */
+ error (_("I refuse to debug myself!"));
if (from_tty)
{
- exec_file = (char *) get_exec_file (0);
+ exec_file = get_exec_file (0);
if (exec_file)
- printf_unfiltered ("Attaching to program: %s, %s\n", exec_file,
+ printf_unfiltered (_("Attaching to program: %s, %s\n"), exec_file,
target_pid_to_str (pid_to_ptid (pid)));
else
- printf_unfiltered ("Attaching to %s\n",
+ printf_unfiltered (_("Attaching to %s\n"),
target_pid_to_str (pid_to_ptid (pid)));
gdb_flush (gdb_stdout);
#ifdef PT_ATTACH
errno = 0;
- ptrace (PT_ATTACH, pid, (PTRACE_TYPE_ARG3) 0, 0);
+ ptrace (PT_ATTACH, pid, (PTRACE_TYPE_ARG3)0, 0);
if (errno != 0)
- perror_with_name ("ptrace");
+ perror_with_name (("ptrace"));
attach_flag = 1;
#else
- error ("This system does not support attaching to a process");
+ error (_("This system does not support attaching to a process"));
#endif
inferior_ptid = pid_to_ptid (pid);
push_target (ptrace_ops_hack);
}
-static void
+#ifdef PT_GET_PROCESS_STATE
+
+void
inf_ptrace_post_attach (int pid)
{
- /* This version of Unix doesn't require a meaningful "post attach"
- operation by a debugger. */
+ ptrace_event_t pe;
+
+ /* Set the initial event mask. */
+ memset (&pe, 0, sizeof pe);
+ pe.pe_set_event |= PTRACE_FORK;
+ if (ptrace (PT_SET_EVENT_MASK, pid,
+ (PTRACE_TYPE_ARG3)&pe, sizeof pe) == -1)
+ perror_with_name (("ptrace"));
}
-/* Take a program previously attached to and detaches it. The program
- resumes execution and will no longer stop on signals, etc. We'd
- better not have left any breakpoints in the program or it'll die
- when it hits one. For this to work, it may be necessary for the
- process to have been previously attached. It *might* work if the
- program was started via the normal ptrace (PTRACE_TRACEME). */
+#endif
+
+/* Detach from the inferior, optionally passing it the signal
+ specified by ARGS. If FROM_TTY is non-zero, be chatty about it. */
static void
inf_ptrace_detach (char *args, int from_tty)
{
+ pid_t pid = ptid_get_pid (inferior_ptid);
int sig = 0;
- int pid = PIDGET (inferior_ptid);
if (from_tty)
{
char *exec_file = get_exec_file (0);
if (exec_file == 0)
exec_file = "";
- printf_unfiltered ("Detaching from program: %s, %s\n", exec_file,
+ printf_unfiltered (_("Detaching from program: %s, %s\n"), exec_file,
target_pid_to_str (pid_to_ptid (pid)));
gdb_flush (gdb_stdout);
}
sig = atoi (args);
#ifdef PT_DETACH
+ /* We'd better not have left any breakpoints in the program or it'll
+ die when it hits one. Also note that this may only work if we
+ previously attached to the inferior. It *might* work if we
+ started the process ourselves. */
errno = 0;
- ptrace (PT_DETACH, pid, (PTRACE_TYPE_ARG3) 1, sig);
+ ptrace (PT_DETACH, pid, (PTRACE_TYPE_ARG3)1, sig);
if (errno != 0)
- perror_with_name ("ptrace");
+ perror_with_name (("ptrace"));
attach_flag = 0;
#else
- error ("This system does not support detaching from a process");
+ error (_("This system does not support detaching from a process"));
#endif
inferior_ptid = null_ptid;
unpush_target (ptrace_ops_hack);
}
-/* Get ready to modify the registers array. On machines which store
- individual registers, this doesn't need to do anything. On
- machines which store all the registers in one fell swoop, this
- makes sure that registers contains all the registers from the
- program being debugged. */
+/* Kill the inferior. */
static void
-inf_ptrace_prepare_to_store (void)
+inf_ptrace_kill (void)
{
-}
-
-/* Print status information about what we're accessing. */
-
-static void
-inf_ptrace_files_info (struct target_ops *ignore)
-{
- printf_unfiltered ("\tUsing the running image of %s %s.\n",
- attach_flag ? "attached" : "child",
- target_pid_to_str (inferior_ptid));
-}
+ pid_t pid = ptid_get_pid (inferior_ptid);
+ int status;
-static void
-inf_ptrace_open (char *arg, int from_tty)
-{
- error ("Use the \"run\" command to start a Unix child process.");
-}
+ if (pid == 0)
+ return;
-/* Stub function which causes the inferior that runs it, to be ptrace-able
- by its parent process. */
+ ptrace (PT_KILL, pid, (PTRACE_TYPE_ARG3)0, 0);
+ waitpid (pid, &status, 0);
-static void
-inf_ptrace_me (void)
-{
- /* "Trace me, Dr. Memory!" */
- ptrace (0, 0, (PTRACE_TYPE_ARG3) 0, 0);
+ target_mourn_inferior ();
}
-/* Stub function which causes the GDB that runs it, to start ptrace-ing
- the child process. */
+/* Stop the inferior. */
static void
-inf_ptrace_him (int pid)
+inf_ptrace_stop (void)
{
- push_target (ptrace_ops_hack);
-
- /* On some targets, there must be some explicit synchronization
- between the parent and child processes after the debugger
- forks, and before the child execs the debuggee program. This
- call basically gives permission for the child to exec.
- */
-
- target_acknowledge_created_inferior (pid);
-
- /* START_INFERIOR_TRAPS_EXPECTED is defined in inferior.h,
- * and will be 1 or 2 depending on whether we're starting
- * without or with a shell.
- */
- startup_inferior (START_INFERIOR_TRAPS_EXPECTED);
-
- /* On some targets, there must be some explicit actions taken after
- the inferior has been started up.
- */
- target_post_startup_inferior (pid_to_ptid (pid));
+ /* Send a SIGINT to the process group. This acts just like the user
+ typed a ^C on the controlling terminal. Note that using a
+ negative process number in kill() is a System V-ism. The proper
+ BSD interface is killpg(). However, all modern BSDs support the
+ System V interface too. */
+ kill (-inferior_process_group, SIGINT);
}
-/* Start an inferior Unix child process and sets inferior_ptid to its
- pid. EXEC_FILE is the file to run. ALLARGS is a string containing
- the arguments to the program. ENV is the environment vector to
- pass. Errors reported with error(). */
+/* Resume execution of thread PTID, or all threads if PTID is -1. If
+ STEP is nonzero, single-step it. If SIGNAL is nonzero, give it
+ that signal. */
static void
-inf_ptrace_create_inferior (char *exec_file, char *allargs, char **env,
- int from_tty)
+inf_ptrace_resume (ptid_t ptid, int step, enum target_signal signal)
{
- fork_inferior (exec_file, allargs, env, inf_ptrace_me, inf_ptrace_him,
- NULL, NULL);
- /* We are at the first instruction we care about. */
- observer_notify_inferior_created (¤t_target, from_tty);
- /* Pedal to the metal... */
- proceed ((CORE_ADDR) -1, TARGET_SIGNAL_0, 0);
-}
+ pid_t pid = ptid_get_pid (ptid);
+ int request = PT_CONTINUE;
-static void
-inf_ptrace_post_startup_inferior (ptid_t ptid)
-{
- /* This version of Unix doesn't require a meaningful "post startup inferior"
- operation by a debugger.
- */
-}
+ if (pid == -1)
+ /* Resume all threads. Traditionally ptrace() only supports
+ single-threaded processes, so simply resume the inferior. */
+ pid = ptid_get_pid (inferior_ptid);
-static void
-inf_ptrace_acknowledge_created_inferior (int pid)
-{
- /* This version of Unix doesn't require a meaningful "acknowledge created inferior"
- operation by a debugger.
- */
-}
+ if (step)
+ {
+ /* If this system does not support PT_STEP, a higher level
+ function will have called single_step() to transmute the step
+ request into a continue request (by setting breakpoints on
+ all possible successor instructions), so we don't have to
+ worry about that here. */
+ request = PT_STEP;
+ }
-static int
-inf_ptrace_insert_fork_catchpoint (int pid)
-{
- /* This version of Unix doesn't support notification of fork events. */
- return 0;
+ /* An address of (PTRACE_TYPE_ARG3)1 tells ptrace to continue from
+ where it was. If GDB wanted it to start some other way, we have
+ already written a new program counter value to the child. */
+ errno = 0;
+ ptrace (request, pid, (PTRACE_TYPE_ARG3)1, target_signal_to_host (signal));
+ if (errno != 0)
+ perror_with_name (("ptrace"));
}
-static int
-inf_ptrace_remove_fork_catchpoint (int pid)
-{
- /* This version of Unix doesn't support notification of fork events. */
- return 0;
-}
+/* Wait for the child specified by PTID to do something. Return the
+ process ID of the child, or MINUS_ONE_PTID in case of error; store
+ the status in *OURSTATUS. */
-static int
-inf_ptrace_insert_vfork_catchpoint (int pid)
+static ptid_t
+inf_ptrace_wait (ptid_t ptid, struct target_waitstatus *ourstatus)
{
- /* This version of Unix doesn't support notification of vfork events. */
- return 0;
-}
+ pid_t pid;
+ int status, save_errno;
-static int
-inf_ptrace_remove_vfork_catchpoint (int pid)
-{
- /* This version of Unix doesn't support notification of vfork events. */
- return 0;
-}
+ do
+ {
+ set_sigint_trap ();
+ set_sigio_trap ();
-static int
-inf_ptrace_follow_fork (int follow_child)
-{
- /* This version of Unix doesn't support following fork or vfork events. */
- return 0;
-}
+ do
+ {
+ pid = waitpid (ptid_get_pid (ptid), &status, 0);
+ save_errno = errno;
+ }
+ while (pid == -1 && errno == EINTR);
-static int
-inf_ptrace_insert_exec_catchpoint (int pid)
-{
- /* This version of Unix doesn't support notification of exec events. */
- return 0;
-}
+ clear_sigio_trap ();
+ clear_sigint_trap ();
-static int
-inf_ptrace_remove_exec_catchpoint (int pid)
-{
- /* This version of Unix doesn't support notification of exec events. */
- return 0;
-}
+ if (pid == -1)
+ {
+ fprintf_unfiltered (gdb_stderr,
+ _("Child process unexpectedly missing: %s.\n"),
+ safe_strerror (save_errno));
-static int
-inf_ptrace_reported_exec_events_per_exec_call (void)
-{
- /* This version of Unix doesn't support notification of exec events.
- */
- return 1;
-}
+ /* Claim it exited with unknown signal. */
+ ourstatus->kind = TARGET_WAITKIND_SIGNALLED;
+ ourstatus->value.sig = TARGET_SIGNAL_UNKNOWN;
+ return minus_one_ptid;
+ }
-static int
-inf_ptrace_has_exited (int pid, int wait_status, int *exit_status)
-{
- if (WIFEXITED (wait_status))
- {
- *exit_status = WEXITSTATUS (wait_status);
- return 1;
+ /* Ignore terminated detached child processes. */
+ if (!WIFSTOPPED (status) && pid != ptid_get_pid (inferior_ptid))
+ pid = -1;
}
+ while (pid == -1);
- if (WIFSIGNALED (wait_status))
+#ifdef PT_GET_PROCESS_STATE
+ if (WIFSTOPPED (status))
{
- *exit_status = 0; /* ?? Don't know what else to say here. */
- return 1;
- }
-
- /* ?? Do we really need to consult the event state, too? Assume the
- wait_state alone suffices.
- */
- return 0;
-}
+ ptrace_state_t pe;
+ pid_t fpid;
-static void
-inf_ptrace_mourn_inferior (void)
-{
- unpush_target (ptrace_ops_hack);
- generic_mourn_inferior ();
-}
+ if (ptrace (PT_GET_PROCESS_STATE, pid,
+ (PTRACE_TYPE_ARG3)&pe, sizeof pe) == -1)
+ perror_with_name (("ptrace"));
-static int
-inf_ptrace_can_run (void)
-{
- return 1;
-}
-
-/* Send a SIGINT to the process group. This acts just like the user
- typed a ^C on the controlling terminal.
+ switch (pe.pe_report_event)
+ {
+ case PTRACE_FORK:
+ ourstatus->kind = TARGET_WAITKIND_FORKED;
+ ourstatus->value.related_pid = pe.pe_other_pid;
+
+ /* Make sure the other end of the fork is stopped too. */
+ fpid = waitpid (pe.pe_other_pid, &status, 0);
+ if (fpid == -1)
+ perror_with_name (("waitpid"));
+
+ if (ptrace (PT_GET_PROCESS_STATE, fpid,
+ (PTRACE_TYPE_ARG3)&pe, sizeof pe) == -1)
+ perror_with_name (("ptrace"));
+
+ gdb_assert (pe.pe_report_event == PTRACE_FORK);
+ gdb_assert (pe.pe_other_pid == pid);
+ if (fpid == ptid_get_pid (inferior_ptid))
+ {
+ ourstatus->value.related_pid = pe.pe_other_pid;
+ return pid_to_ptid (fpid);
+ }
- XXX - This may not be correct for all systems. Some may want to
- use killpg() instead of kill (-pgrp). */
+ return pid_to_ptid (pid);
+ }
+ }
+#endif
-static void
-inf_ptrace_stop (void)
-{
- kill (-inferior_process_group, SIGINT);
+ store_waitstatus (ourstatus, status);
+ return pid_to_ptid (pid);
}
-/* Perform a partial transfer to/from the specified object. For
- memory transfers, fall back to the old memory xfer functions. */
+/* Attempt a transfer all LEN bytes starting at OFFSET between the
+ inferior's OBJECT:ANNEX space and GDB's READBUF/WRITEBUF buffer.
+ Return the number of bytes actually transferred. */
static LONGEST
inf_ptrace_xfer_partial (struct target_ops *ops, enum target_object object,
- const char *annex, void *readbuf,
- const void *writebuf, ULONGEST offset, LONGEST len)
+ const char *annex, gdb_byte *readbuf,
+ const gdb_byte *writebuf,
+ ULONGEST offset, LONGEST len)
{
+ pid_t pid = ptid_get_pid (inferior_ptid);
+
switch (object)
{
case TARGET_OBJECT_MEMORY:
- if (readbuf)
- return inf_ptrace_xfer_memory (offset, readbuf, len, 0 /*write */ ,
- NULL, ops);
- if (writebuf)
- return inf_ptrace_xfer_memory (offset, readbuf, len, 1 /*write */ ,
- NULL, ops);
- return -1;
+#ifdef PT_IO
+ /* OpenBSD 3.1, NetBSD 1.6 and FreeBSD 5.0 have a new PT_IO
+ request that promises to be much more efficient in reading
+ and writing data in the traced process's address space. */
+ {
+ struct ptrace_io_desc piod;
+
+ /* NOTE: We assume that there are no distinct address spaces
+ for instruction and data. However, on OpenBSD 3.9 and
+ later, PIOD_WRITE_D doesn't allow changing memory that's
+ mapped read-only. Since most code segments will be
+ read-only, using PIOD_WRITE_D will prevent us from
+ inserting breakpoints, so we use PIOD_WRITE_I instead. */
+ piod.piod_op = writebuf ? PIOD_WRITE_I : PIOD_READ_D;
+ piod.piod_addr = writebuf ? (void *) writebuf : readbuf;
+ piod.piod_offs = (void *) (long) offset;
+ piod.piod_len = len;
+
+ errno = 0;
+ if (ptrace (PT_IO, pid, (caddr_t)&piod, 0) == 0)
+ /* Return the actual number of bytes read or written. */
+ return piod.piod_len;
+ /* If the PT_IO request is somehow not supported, fallback on
+ using PT_WRITE_D/PT_READ_D. Otherwise we will return zero
+ to indicate failure. */
+ if (errno != EINVAL)
+ return 0;
+ }
+#endif
+ {
+ union
+ {
+ PTRACE_TYPE_RET word;
+ gdb_byte byte[sizeof (PTRACE_TYPE_RET)];
+ } buffer;
+ ULONGEST rounded_offset;
+ LONGEST partial_len;
+
+ /* Round the start offset down to the next long word
+ boundary. */
+ rounded_offset = offset & -(ULONGEST) sizeof (PTRACE_TYPE_RET);
+
+ /* Since ptrace will transfer a single word starting at that
+ rounded_offset the partial_len needs to be adjusted down to
+ that (remember this function only does a single transfer).
+ Should the required length be even less, adjust it down
+ again. */
+ partial_len = (rounded_offset + sizeof (PTRACE_TYPE_RET)) - offset;
+ if (partial_len > len)
+ partial_len = len;
+
+ if (writebuf)
+ {
+ /* If OFFSET:PARTIAL_LEN is smaller than
+ ROUNDED_OFFSET:WORDSIZE then a read/modify write will
+ be needed. Read in the entire word. */
+ if (rounded_offset < offset
+ || (offset + partial_len
+ < rounded_offset + sizeof (PTRACE_TYPE_RET)))
+ /* Need part of initial word -- fetch it. */
+ buffer.word = ptrace (PT_READ_I, pid,
+ (PTRACE_TYPE_ARG3)(long)rounded_offset, 0);
+
+ /* Copy data to be written over corresponding part of
+ buffer. */
+ memcpy (buffer.byte + (offset - rounded_offset),
+ writebuf, partial_len);
+
+ errno = 0;
+ ptrace (PT_WRITE_D, pid,
+ (PTRACE_TYPE_ARG3)(long)rounded_offset, buffer.word);
+ if (errno)
+ {
+ /* Using the appropriate one (I or D) is necessary for
+ Gould NP1, at least. */
+ errno = 0;
+ ptrace (PT_WRITE_I, pid,
+ (PTRACE_TYPE_ARG3)(long)rounded_offset, buffer.word);
+ if (errno)
+ return 0;
+ }
+ }
+
+ if (readbuf)
+ {
+ errno = 0;
+ buffer.word = ptrace (PT_READ_I, pid,
+ (PTRACE_TYPE_ARG3)(long)rounded_offset, 0);
+ if (errno)
+ return 0;
+ /* Copy appropriate bytes out of the buffer. */
+ memcpy (readbuf, buffer.byte + (offset - rounded_offset),
+ partial_len);
+ }
+
+ return partial_len;
+ }
case TARGET_OBJECT_UNWIND_TABLE:
return -1;
}
}
-static char *
-inf_ptrace_pid_to_str (ptid_t ptid)
+/* Return non-zero if the thread specified by PTID is alive. */
+
+static int
+inf_ptrace_thread_alive (ptid_t ptid)
+{
+ /* ??? Is kill the right way to do this? */
+ return (kill (ptid_get_pid (ptid), 0) != -1);
+}
+
+/* Print status information about what we're accessing. */
+
+static void
+inf_ptrace_files_info (struct target_ops *ignore)
{
- return normal_pid_to_str (ptid);
+ printf_filtered (_("\tUsing the running image of %s %s.\n"),
+ attach_flag ? "attached" : "child",
+ target_pid_to_str (inferior_ptid));
}
+/* Create a prototype ptrace target. The client can override it with
+ local methods. */
+
struct target_ops *
inf_ptrace_target (void)
{
struct target_ops *t = inf_child_target ();
- t->to_open = inf_ptrace_open;
+
t->to_attach = inf_ptrace_attach;
- t->to_post_attach = inf_ptrace_post_attach;
t->to_detach = inf_ptrace_detach;
t->to_resume = inf_ptrace_resume;
t->to_wait = inf_ptrace_wait;
- t->to_prepare_to_store = inf_ptrace_prepare_to_store;
- t->to_xfer_memory = inf_ptrace_xfer_memory;
- t->to_xfer_partial = inf_ptrace_xfer_partial;
t->to_files_info = inf_ptrace_files_info;
- t->to_kill = inf_ptrace_kill_inferior;
+ t->to_kill = inf_ptrace_kill;
t->to_create_inferior = inf_ptrace_create_inferior;
- t->to_post_startup_inferior = inf_ptrace_post_startup_inferior;
- t->to_acknowledge_created_inferior =
- inf_ptrace_acknowledge_created_inferior;
- t->to_insert_fork_catchpoint = inf_ptrace_insert_fork_catchpoint;
- t->to_remove_fork_catchpoint = inf_ptrace_remove_fork_catchpoint;
- t->to_insert_vfork_catchpoint = inf_ptrace_insert_vfork_catchpoint;
- t->to_remove_vfork_catchpoint = inf_ptrace_remove_vfork_catchpoint;
+#ifdef PT_GET_PROCESS_STATE
t->to_follow_fork = inf_ptrace_follow_fork;
- t->to_insert_exec_catchpoint = inf_ptrace_insert_exec_catchpoint;
- t->to_remove_exec_catchpoint = inf_ptrace_remove_exec_catchpoint;
- t->to_reported_exec_events_per_exec_call =
- inf_ptrace_reported_exec_events_per_exec_call;
- t->to_has_exited = inf_ptrace_has_exited;
+ t->to_post_startup_inferior = inf_ptrace_post_startup_inferior;
+ t->to_post_attach = inf_ptrace_post_attach;
+#endif
t->to_mourn_inferior = inf_ptrace_mourn_inferior;
- t->to_can_run = inf_ptrace_can_run;
t->to_thread_alive = inf_ptrace_thread_alive;
- t->to_pid_to_str = inf_ptrace_pid_to_str;
+ t->to_pid_to_str = normal_pid_to_str;
t->to_stop = inf_ptrace_stop;
- t->to_stratum = process_stratum;
- t->to_has_all_memory = 1;
- t->to_has_memory = 1;
- t->to_has_stack = 1;
- t->to_has_registers = 1;
- t->to_has_execution = 1;
- t->to_magic = OPS_MAGIC;
+ t->to_xfer_partial = inf_ptrace_xfer_partial;
+
ptrace_ops_hack = t;
return t;
}
+\f
+
+/* Pointer to a function that returns the offset within the user area
+ where a particular register is stored. */
+static CORE_ADDR (*inf_ptrace_register_u_offset)(int);
+
+/* Fetch register REGNUM from the inferior. */
+
+static void
+inf_ptrace_fetch_register (int regnum)
+{
+ CORE_ADDR addr;
+ size_t size;
+ PTRACE_TYPE_RET *buf;
+ int pid, i;
+
+ if (CANNOT_FETCH_REGISTER (regnum))
+ {
+ regcache_raw_supply (current_regcache, regnum, NULL);
+ return;
+ }
+
+ /* Cater for systems like GNU/Linux, that implement threads as
+ separate processes. */
+ pid = ptid_get_lwp (inferior_ptid);
+ if (pid == 0)
+ pid = ptid_get_pid (inferior_ptid);
+
+ /* This isn't really an address, but ptrace thinks of it as one. */
+ addr = inf_ptrace_register_u_offset (regnum);
+ size = register_size (current_gdbarch, regnum);
+
+ gdb_assert ((size % sizeof (PTRACE_TYPE_RET)) == 0);
+ buf = alloca (size);
+
+ /* Read the register contents from the inferior a chunk at a time. */
+ for (i = 0; i < size / sizeof (PTRACE_TYPE_RET); i++)
+ {
+ errno = 0;
+ buf[i] = ptrace (PT_READ_U, pid, (PTRACE_TYPE_ARG3)addr, 0);
+ if (errno != 0)
+ error (_("Couldn't read register %s (#%d): %s."),
+ REGISTER_NAME (regnum), regnum, safe_strerror (errno));
+
+ addr += sizeof (PTRACE_TYPE_RET);
+ }
+ regcache_raw_supply (current_regcache, regnum, buf);
+}
+
+/* Fetch register REGNUM from the inferior. If REGNUM is -1, do this
+ for all registers. */
+
+static void
+inf_ptrace_fetch_registers (int regnum)
+{
+ if (regnum == -1)
+ for (regnum = 0; regnum < NUM_REGS; regnum++)
+ inf_ptrace_fetch_register (regnum);
+ else
+ inf_ptrace_fetch_register (regnum);
+}
+
+/* Store register REGNUM into the inferior. */
+
+static void
+inf_ptrace_store_register (int regnum)
+{
+ CORE_ADDR addr;
+ size_t size;
+ PTRACE_TYPE_RET *buf;
+ int pid, i;
+
+ if (CANNOT_STORE_REGISTER (regnum))
+ return;
+
+ /* Cater for systems like GNU/Linux, that implement threads as
+ separate processes. */
+ pid = ptid_get_lwp (inferior_ptid);
+ if (pid == 0)
+ pid = ptid_get_pid (inferior_ptid);
+
+ /* This isn't really an address, but ptrace thinks of it as one. */
+ addr = inf_ptrace_register_u_offset (regnum);
+ size = register_size (current_gdbarch, regnum);
+
+ gdb_assert ((size % sizeof (PTRACE_TYPE_RET)) == 0);
+ buf = alloca (size);
+
+ /* Write the register contents into the inferior a chunk at a time. */
+ regcache_raw_collect (current_regcache, regnum, buf);
+ for (i = 0; i < size / sizeof (PTRACE_TYPE_RET); i++)
+ {
+ errno = 0;
+ ptrace (PT_WRITE_U, pid, (PTRACE_TYPE_ARG3)addr, buf[i]);
+ if (errno != 0)
+ error (_("Couldn't write register %s (#%d): %s."),
+ REGISTER_NAME (regnum), regnum, safe_strerror (errno));
+
+ addr += sizeof (PTRACE_TYPE_RET);
+ }
+}
+
+/* Store register REGNUM back into the inferior. If REGNUM is -1, do
+ this for all registers. */
+
+void
+inf_ptrace_store_registers (int regnum)
+{
+ if (regnum == -1)
+ for (regnum = 0; regnum < NUM_REGS; regnum++)
+ inf_ptrace_store_register (regnum);
+ else
+ inf_ptrace_store_register (regnum);
+}
+
+/* Create a "traditional" ptrace target. REGISTER_U_OFFSET should be
+ a function returning the offset within the user area where a
+ particular register is stored. */
+
+struct target_ops *
+inf_ptrace_trad_target (CORE_ADDR (*register_u_offset)(int))
+{
+ struct target_ops *t = inf_ptrace_target();
+
+ gdb_assert (register_u_offset);
+ inf_ptrace_register_u_offset = register_u_offset;
+ t->to_fetch_registers = inf_ptrace_fetch_registers;
+ t->to_store_registers = inf_ptrace_store_registers;
+
+ return t;
+}
projects / deliverable / binutils-gdb.git / blobdiff