/* Local functions: */
-static void nofp_registers_info (char *, int);
+static void info_registers_command (char *, int);
static void until_next_command (int);
static void unset_command (char *, int);
-static void float_info (char *, int);
+static void info_float_command (char *, int);
static void disconnect_command (char *, int);
static void environment_info (char *, int);
-static void program_info (char *, int);
+static void info_program_command (char *, int);
static void finish_command (char *, int);
static void run_command (char *, int);
-void _initialize_infcmd (void);
-
#define ERROR_NO_INFERIOR \
if (!target_has_execution) error (_("The program is not being run."));
{
/* Be sure we own the terminal in case write operations are performed. */
- target_terminal_ours_for_output ();
+ target_terminal::ours_for_output ();
/* If the target hasn't taken care of this already, do it now.
Targets which need to access registers during to_open,
}
}
-/* Implement the "run" command. If TBREAK_AT_MAIN is set, then insert
- a temporary breakpoint at the begining of the main program before
- running the program. */
+/* Determine how the new inferior will behave. */
+
+enum run_how
+ {
+ /* Run program without any explicit stop during startup. */
+ RUN_NORMAL,
+
+ /* Stop at the beginning of the program's main function. */
+ RUN_STOP_AT_MAIN,
+
+ /* Stop at the first instruction of the program. */
+ RUN_STOP_AT_FIRST_INSN
+ };
+
+/* Implement the "run" command. Force a stop during program start if
+ requested by RUN_HOW. */
static void
-run_command_1 (char *args, int from_tty, int tbreak_at_main)
+run_command_1 (char *args, int from_tty, enum run_how run_how)
{
const char *exec_file;
struct cleanup *old_chain;
struct target_ops *run_target;
int async_exec;
struct cleanup *args_chain;
+ CORE_ADDR pc;
dont_repeat ();
/* Done. Can now set breakpoints, change inferior args, etc. */
- /* Insert the temporary breakpoint if a location was specified. */
- if (tbreak_at_main)
+ /* Insert temporary breakpoint in main function if requested. */
+ if (run_how == RUN_STOP_AT_MAIN)
tbreak_command (main_name (), 0);
exec_file = get_exec_file (0);
has done its thing; now we are setting up the running program. */
post_create_inferior (¤t_target, 0);
+ /* Queue a pending event so that the program stops immediately. */
+ if (run_how == RUN_STOP_AT_FIRST_INSN)
+ {
+ thread_info *thr = inferior_thread ();
+ thr->suspend.waitstatus_pending_p = 1;
+ thr->suspend.waitstatus.kind = TARGET_WAITKIND_STOPPED;
+ thr->suspend.waitstatus.value.sig = GDB_SIGNAL_0;
+ }
+
/* Start the target running. Do not use -1 continuation as it would skip
breakpoint right at the entry point. */
proceed (regcache_read_pc (get_current_regcache ()), GDB_SIGNAL_0);
static void
run_command (char *args, int from_tty)
{
- run_command_1 (args, from_tty, 0);
+ run_command_1 (args, from_tty, RUN_NORMAL);
}
/* Start the execution of the program up until the beginning of the main
error (_("No symbol table loaded. Use the \"file\" command."));
/* Run the program until reaching the main procedure... */
- run_command_1 (args, from_tty, 1);
+ run_command_1 (args, from_tty, RUN_STOP_AT_MAIN);
+}
+
+/* Start the execution of the program stopping at the first
+ instruction. */
+
+static void
+starti_command (char *args, int from_tty)
+{
+ run_command_1 (args, from_tty, RUN_STOP_AT_FIRST_INSN);
}
static int
Continuing.
<no thread was resumed, but the inferior now owns the terminal>
*/
- target_terminal_inferior ();
+ target_terminal::inferior ();
}
}
else
static void
set_step_frame (void)
{
- struct symtab_and_line sal;
- CORE_ADDR pc;
- struct frame_info *frame = get_current_frame ();
- struct thread_info *tp = inferior_thread ();
+ frame_info *frame = get_current_frame ();
- find_frame_sal (frame, &sal);
+ symtab_and_line sal = find_frame_sal (frame);
set_step_info (frame, sal);
- pc = get_frame_pc (frame);
+
+ CORE_ADDR pc = get_frame_pc (frame);
+ thread_info *tp = inferior_thread ();
tp->control.step_start_function = find_pc_function (pc);
}
&tp->control.step_range_end) == 0)
error (_("Cannot find bounds of current function"));
- target_terminal_ours_for_output ();
+ target_terminal::ours_for_output ();
printf_filtered (_("Single stepping until exit from function %s,"
"\nwhich has no line number information.\n"),
name);
{
struct gdbarch *gdbarch = get_current_arch ();
CORE_ADDR addr;
- struct symtabs_and_lines sals;
- struct symtab_and_line sal;
struct symbol *fn;
struct symbol *sfn;
int async_exec;
if (!arg)
error_no_arg (_("starting address"));
- sals = decode_line_with_last_displayed (arg, DECODE_LINE_FUNFIRSTLINE);
- if (sals.nelts != 1)
- {
- error (_("Unreasonable jump request"));
- }
-
- sal = sals.sals[0];
- xfree (sals.sals);
+ std::vector<symtab_and_line> sals
+ = decode_line_with_last_displayed (arg, DECODE_LINE_FUNFIRSTLINE);
+ if (sals.size () != 1)
+ error (_("Unreasonable jump request"));
/* Done with ARGS. */
do_cleanups (args_chain);
+ symtab_and_line &sal = sals[0];
+
if (sal.symtab == 0 && sal.pc == 0)
error (_("No source file has been specified."));
{
struct frame_info *frame = get_selected_frame (NULL);
struct gdbarch *gdbarch = get_frame_arch (frame);
- struct symtab_and_line sr_sal;
/* Set a step-resume at the function's entry point. Once that's
hit, we'll do one more step backwards. */
- init_sal (&sr_sal);
+ symtab_and_line sr_sal;
sr_sal.pc = sal.pc;
sr_sal.pspace = get_frame_program_space (frame);
insert_step_resume_breakpoint_at_sal (gdbarch,
called by that frame. We don't use the magic "1" value for
step_range_end, because then infrun will think this is nexti,
and not step over the rest of this inlined function call. */
- struct symtab_and_line empty_sal;
-
- init_sal (&empty_sal);
- set_step_info (frame, empty_sal);
+ set_step_info (frame, {});
tp->control.step_range_start = get_frame_pc (frame);
tp->control.step_range_end = tp->control.step_range_start;
tp->control.step_over_calls = STEP_OVER_ALL;
\f
static void
-program_info (char *args, int from_tty)
+info_program_command (char *args, int from_tty)
{
bpstat bs;
int num, stat;
}
static void
-all_registers_info (char *addr_exp, int from_tty)
+info_all_registers_command (char *addr_exp, int from_tty)
{
registers_info (addr_exp, 1);
}
static void
-nofp_registers_info (char *addr_exp, int from_tty)
+info_registers_command (char *addr_exp, int from_tty)
{
registers_info (addr_exp, 0);
}
}
static void
-vector_info (char *args, int from_tty)
+info_vector_command (char *args, int from_tty)
{
if (!target_has_registers)
error (_("The program has no registers now."));
/* Set up the "saved terminal modes" of the inferior
based on what modes we are starting it with. */
- target_terminal_init ();
+ target_terminal::init ();
/* Install inferior's terminal modes. This may look like a no-op,
as we've just saved them above, however, this does more than
while we're in the event loop waiting for that stop. That is,
before the attach continuation runs and the command is really
finished. */
- target_terminal_inferior ();
+ target_terminal::inferior ();
/* Set up execution context to know that we should return from
wait_for_inferior as soon as the target reports a stop. */
}
static void
-float_info (char *args, int from_tty)
+info_float_command (char *args, int from_tty)
{
struct frame_info *frame;
info_proc_cmd_1 (args, IP_ALL, from_tty);
}
+/* This help string is used for the run, start, and starti commands.
+ It is defined as a macro to prevent duplication. */
+
+#define RUN_ARGS_HELP \
+"You may specify arguments to give it.\n\
+Args may include \"*\", or \"[...]\"; they are expanded using the\n\
+shell that will start the program (specified by the \"$SHELL\" environment\n\
+variable). Input and output redirection with \">\", \"<\", or \">>\"\n\
+are also allowed.\n\
+\n\
+With no arguments, uses arguments last specified (with \"run\" or \n\
+\"set args\"). To cancel previous arguments and run with no arguments,\n\
+use \"set args\" without arguments.\n\
+\n\
+To start the inferior without using a shell, use \"set startup-with-shell off\"."
+
void
_initialize_infcmd (void)
{
add_com_alias ("fg", "cont", class_run, 1);
c = add_com ("run", class_run, run_command, _("\
-Start debugged program. You may specify arguments to give it.\n\
-Args may include \"*\", or \"[...]\"; they are expanded using the\n\
-shell that will start the program (specified by the \"$SHELL\"\
-environment\nvariable). Input and output redirection with \">\",\
-\"<\", or \">>\"\nare also allowed.\n\n\
-With no arguments, uses arguments last specified (with \"run\" \
-or \"set args\").\n\
-To cancel previous arguments and run with no arguments,\n\
-use \"set args\" without arguments.\n\
-To start the inferior without using a shell, use \"set \
-startup-with-shell off\"."));
+Start debugged program.\n"
+RUN_ARGS_HELP));
set_cmd_completer (c, filename_completer);
add_com_alias ("r", "run", class_run, 1);
c = add_com ("start", class_run, start_command, _("\
-Run the debugged program until the beginning of the main procedure.\n\
-You may specify arguments to give to your program, just as with the\n\
-\"run\" command."));
+Start the debugged program stopping at the beginning of the main procedure.\n"
+RUN_ARGS_HELP));
+ set_cmd_completer (c, filename_completer);
+
+ c = add_com ("starti", class_run, starti_command, _("\
+Start the debugged program stopping at the first instruction.\n"
+RUN_ARGS_HELP));
set_cmd_completer (c, filename_completer);
add_com ("interrupt", class_run, interrupt_command,
otherwise all the threads in the program are stopped. To \n\
interrupt all running threads in non-stop mode, use the -a option."));
- c = add_info ("registers", nofp_registers_info, _("\
+ c = add_info ("registers", info_registers_command, _("\
List of integer registers and their contents, for selected stack frame.\n\
Register name as argument means describe only that register."));
add_info_alias ("r", "registers", 1);
set_cmd_completer (c, reg_or_group_completer);
- c = add_info ("all-registers", all_registers_info, _("\
+ c = add_info ("all-registers", info_all_registers_command, _("\
List of all registers and their contents, for selected stack frame.\n\
Register name as argument means describe only that register."));
set_cmd_completer (c, reg_or_group_completer);
- add_info ("program", program_info,
+ add_info ("program", info_program_command,
_("Execution status of the program."));
- add_info ("float", float_info,
+ add_info ("float", info_float_command,
_("Print the status of the floating point unit\n"));
- add_info ("vector", vector_info,
+ add_info ("vector", info_vector_command,
_("Print the status of the vector unit\n"));
add_prefix_cmd ("proc", class_info, info_proc_cmd,
projects / deliverable / binutils-gdb.git / blobdiff