if (background && !target->to_can_async_p (target))
error (_("Asynchronous execution not supported on this target."));
- /* If we don't get a request of running in the bg, then we need
- to simulate synchronous (fg) execution. */
- if (!background && target->to_can_async_p (target))
+ if (!background)
{
- /* Simulate synchronous execution. Note no cleanup is necessary
- for this. stdin is re-enabled whenever an error reaches the
- top level. */
+ /* If we get a request for running in the fg, then we need to
+ simulate synchronous (fg) execution. Note no cleanup is
+ necessary for this. stdin is re-enabled whenever an error
+ reaches the top level. */
async_disable_stdin ();
}
}
make_cleanup (delete_longjmp_breakpoint_cleanup, &thread);
}
- /* In synchronous case, all is well; each step_once call will step once. */
- if (!target_can_async_p ())
- {
- for (; count > 0; count--)
- {
- step_once (skip_subroutines, single_inst, count, thread);
-
- if (!target_has_execution)
- break;
- else
- {
- struct thread_info *tp = inferior_thread ();
+ /* Do only one step for now, before returning control to the event
+ loop. Let the continuation figure out how many other steps we
+ need to do, and handle them one at the time, through
+ step_once. */
+ step_once (skip_subroutines, single_inst, count, thread);
- if (!tp->control.stop_step || !tp->step_multi)
- {
- /* If we stopped for some reason that is not stepping
- there are no further steps to make. */
- tp->step_multi = 0;
- break;
- }
- }
- }
-
- do_cleanups (cleanups);
- }
- else
- {
- /* In the case of an asynchronous target things get complicated;
- do only one step for now, before returning control to the
- event loop. Let the continuation figure out how many other
- steps we need to do, and handle them one at the time, through
- step_once. */
- step_once (skip_subroutines, single_inst, count, thread);
-
- /* We are running, and the continuation is installed. It will
- disable the longjmp breakpoint as appropriate. */
- discard_cleanups (cleanups);
- }
+ /* We are running, and the continuation is installed. It will
+ disable the longjmp breakpoint as appropriate. */
+ discard_cleanups (cleanups);
}
struct step_1_continuation_args
if (count > 0)
{
+ struct step_1_continuation_args *args;
/* Don't assume THREAD is a valid thread id. It is set to -1 if
the longjmp breakpoint was not required. Use the
INFERIOR_PTID thread instead, which is the same thread when
tp->control.stepping_command = 1;
proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT);
- /* For async targets, register a continuation to do any
- additional steps. For sync targets, the caller will handle
- further stepping. */
- if (target_can_async_p ())
- {
- struct step_1_continuation_args *args;
-
- args = xmalloc (sizeof (*args));
- args->skip_subroutines = skip_subroutines;
- args->single_inst = single_inst;
- args->count = count;
- args->thread = thread;
+ /* Register a continuation to do any additional steps. */
+ args = XNEW (struct step_1_continuation_args);
+ args = xmalloc (sizeof (*args));
+ args->skip_subroutines = skip_subroutines;
+ args->single_inst = single_inst;
+ args->count = count;
+ args->thread = thread;
- add_intermediate_continuation (tp, step_1_continuation, args, xfree);
- }
+ add_intermediate_continuation (tp, step_1_continuation, args, xfree);
}
}
proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT);
- if (target_can_async_p () && is_running (inferior_ptid))
+ if (is_running (inferior_ptid))
{
struct until_next_continuation_args *cont_args;
{
struct value *func;
- func = read_var_value (a->function, get_current_frame ());
+ func = read_var_value (a->function, NULL, get_current_frame ());
TRY
{
/* print_return_value can throw an exception in some
/* We want to print return value, please... */
tp->control.proceed_to_finish = 1;
- cargs = xmalloc (sizeof (*cargs));
+ cargs = XNEW (struct finish_command_continuation_args);
cargs->thread = thread;
cargs->breakpoint = breakpoint;
proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT);
discard_cleanups (old_chain);
- if (!target_can_async_p ())
- do_all_continuations (0);
}
/* "finish": Set a temporary breakpoint at the place the selected
/* The user requested a plain `attach', so be sure to leave
the inferior stopped. */
- if (target_can_async_p ())
- async_enable_stdin ();
+ async_enable_stdin ();
/* At least the current thread is already stopped. */
E.g. Mach 3 or GNU hurd. */
if (!target_attach_no_wait)
{
+ struct attach_command_continuation_args *a;
struct inferior *inferior = current_inferior ();
/* Careful here. See comments in inferior.h. Basically some
STOP_QUIETLY_NO_SIGSTOP is for. */
inferior->control.stop_soon = STOP_QUIETLY_NO_SIGSTOP;
- if (target_can_async_p ())
- {
- /* sync_execution mode. Wait for stop. */
- struct attach_command_continuation_args *a;
-
- a = xmalloc (sizeof (*a));
- a->args = xstrdup (args);
- a->from_tty = from_tty;
- a->async_exec = async_exec;
- add_inferior_continuation (attach_command_continuation, a,
- attach_command_continuation_free_args);
-
- /* Done with ARGS. */
- do_cleanups (args_chain);
-
- return;
- }
-
- wait_for_inferior ();
+ /* sync_execution mode. Wait for stop. */
+ a = XNEW (struct attach_command_continuation_args);
+ a->args = xstrdup (args);
+ a->from_tty = from_tty;
+ a->async_exec = async_exec;
+ add_inferior_continuation (attach_command_continuation, a,
+ attach_command_continuation_free_args);
+ /* Done with ARGS. */
+ do_cleanups (args_chain);
+
+ if (!target_is_async_p ())
+ mark_infrun_async_event_handler ();
+ return;
}
/* Done with ARGS. */
if (is_executing (inferior_ptid))
{
+ struct attach_command_continuation_args *a;
struct inferior *inferior = current_inferior ();
/* We're going to install breakpoints, and poke at memory,
inferior->control.stop_soon = STOP_QUIETLY_REMOTE;
/* Wait for stop before proceeding. */
- if (target_can_async_p ())
- {
- struct attach_command_continuation_args *a;
+ a = XNEW (struct attach_command_continuation_args);
+ a->args = xstrdup ("");
+ a->from_tty = from_tty;
+ a->async_exec = async_exec;
+ add_inferior_continuation (attach_command_continuation, a,
+ attach_command_continuation_free_args);
- a = xmalloc (sizeof (*a));
- a->args = xstrdup ("");
- a->from_tty = from_tty;
- a->async_exec = async_exec;
- add_inferior_continuation (attach_command_continuation, a,
- attach_command_continuation_free_args);
-
- do_cleanups (old_chain);
- return;
- }
- else
- wait_for_inferior ();
+ do_cleanups (old_chain);
+ return;
}
async_exec = leave_running;
ptid = minus_one_ptid;
else
ptid = inferior_ptid;
- target_stop (ptid);
+ target_interrupt (ptid);
/* Tag the thread as having been explicitly requested to stop, so
other parts of gdb know not to resume this thread automatically,
projects / deliverable / binutils-gdb.git / blobdiff