/* Low level interface to ptrace, for GDB when running under Unix.
- Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
- 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008,
- 2009, 2010 Free Software Foundation, Inc.
+ Copyright (C) 1986-2014 Free Software Foundation, Inc.
This file is part of GDB.
#include "gdbthread.h"
#include "observer.h"
-#include "gdb_string.h"
+#include <string.h>
#include <signal.h>
#include <fcntl.h>
#include "gdb_select.h"
#include "inflow.h"
+#include "gdbcmd.h"
#ifdef HAVE_SYS_IOCTL_H
#include <sys/ioctl.h>
gdb_getpgrp (void)
{
int process_group = -1;
+
#ifdef HAVE_TERMIOS
process_group = tcgetpgrp (0);
#endif
}
gdb_has_a_terminal_flag = have_not_checked;
+/* The value of the "interactive-mode" setting. */
+static enum auto_boolean interactive_mode = AUTO_BOOLEAN_AUTO;
+
+/* Implement the "show interactive-mode" option. */
+
+static void
+show_interactive_mode (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c,
+ const char *value)
+{
+ if (interactive_mode == AUTO_BOOLEAN_AUTO)
+ fprintf_filtered (file, "Debugger's interactive mode "
+ "is %s (currently %s).\n",
+ value, gdb_has_a_terminal () ? "on" : "off");
+ else
+ fprintf_filtered (file, "Debugger's interactive mode is %s.\n", value);
+}
+
/* Does GDB have a terminal (on stdin)? */
int
gdb_has_a_terminal (void)
{
+ if (interactive_mode != AUTO_BOOLEAN_AUTO)
+ return interactive_mode == AUTO_BOOLEAN_TRUE;
+
switch (gdb_has_a_terminal_flag)
{
case yes:
void
terminal_init_inferior_with_pgrp (int pgrp)
{
- if (gdb_has_a_terminal ())
- {
- struct inferior *inf = current_inferior ();
- struct terminal_info *tinfo = get_inflow_inferior_data (inf);
-
- /* We could just as well copy our_ttystate (if we felt like
- adding a new function serial_copy_tty_state()). */
- xfree (tinfo->ttystate);
- tinfo->ttystate = serial_get_tty_state (stdin_serial);
+ struct inferior *inf = current_inferior ();
+ struct terminal_info *tinfo = get_inflow_inferior_data (inf);
#ifdef PROCESS_GROUP_TYPE
- tinfo->process_group = pgrp;
+ /* Store the process group even without a terminal as it is used not
+ only to reset the tty foreground process group, but also to
+ interrupt the inferior. */
+ tinfo->process_group = pgrp;
#endif
+ if (gdb_has_a_terminal ())
+ {
+ xfree (tinfo->ttystate);
+ tinfo->ttystate = serial_copy_tty_state (stdin_serial,
+ our_terminal_info.ttystate);
+
/* Make sure that next time we call terminal_inferior (which will be
before the program runs, as it needs to be), we install the new
process group. */
and gdb must be able to restore it correctly. */
void
-terminal_save_ours (void)
+terminal_save_ours (struct target_ops *self)
{
if (gdb_has_a_terminal ())
{
- /* We could just as well copy our_ttystate (if we felt like adding
- a new function serial_copy_tty_state). */
xfree (our_terminal_info.ttystate);
our_terminal_info.ttystate = serial_get_tty_state (stdin_serial);
}
}
void
-terminal_init_inferior (void)
+terminal_init_inferior (struct target_ops *self)
{
#ifdef PROCESS_GROUP_TYPE
/* This is for Lynx, and should be cleaned up by having Lynx be a separate
(and the non-threaded child_terminal_init_inferior can just pass in
inferior_ptid to the same routine). */
/* We assume INFERIOR_PID is also the child's process group. */
- terminal_init_inferior_with_pgrp (PIDGET (inferior_ptid));
+ terminal_init_inferior_with_pgrp (ptid_get_pid (inferior_ptid));
#endif /* PROCESS_GROUP_TYPE */
}
This is preparation for starting or resuming the inferior. */
void
-terminal_inferior (void)
+terminal_inferior (struct target_ops *self)
{
struct inferior *inf;
struct terminal_info *tinfo;
should be called to get back to a normal state of affairs. */
void
-terminal_ours_for_output (void)
+terminal_ours_for_output (struct target_ops *self)
{
terminal_ours_1 (1);
}
so they can be restored properly later. */
void
-terminal_ours (void)
+terminal_ours (struct target_ops *self)
{
terminal_ours_1 (0);
}
mode, to avoid flushing input. We need to do the same thing
regardless of output_only, because we don't have separate
terminal_is_ours and terminal_is_ours_for_output flags. It's OK,
- though, since readline will deal with raw mode when/if it needs to.
- */
+ though, since readline will deal with raw mode when/if it needs
+ to. */
serial_noflush_set_tty_state (stdin_serial, our_terminal_info.ttystate,
tinfo->ttystate);
used to check for an error here, so perhaps there are other
such situations as well. */
if (result == -1)
- fprintf_unfiltered (gdb_stderr, "[tcsetpgrp failed in terminal_ours: %s]\n",
+ fprintf_unfiltered (gdb_stderr,
+ "[tcsetpgrp failed in terminal_ours: %s]\n",
safe_strerror (errno));
#endif
#endif /* termios */
static void
inflow_inferior_data_cleanup (struct inferior *inf, void *arg)
{
- struct terminal_info *info;
+ struct terminal_info *info = arg;
- info = inferior_data (inf, inflow_inferior_data);
- if (info != NULL)
- {
- xfree (info->run_terminal);
- xfree (info);
- }
+ xfree (info->run_terminal);
+ xfree (info->ttystate);
+ xfree (info);
}
/* Get the current svr4 data. If none is found yet, add it now. This
info = inferior_data (inf, inflow_inferior_data);
if (info == NULL)
{
- info = XZALLOC (struct terminal_info);
+ info = XCNEW (struct terminal_info);
set_inferior_data (inf, inflow_inferior_data, info);
}
list. */
static void
-inflow_inferior_exit (int pid)
+inflow_inferior_exit (struct inferior *inf)
{
- struct inferior *inf = find_inferior_pid (pid);
struct terminal_info *info;
info = inferior_data (inf, inflow_inferior_data);
if (info != NULL)
{
xfree (info->run_terminal);
+ xfree (info->ttystate);
xfree (info);
set_inferior_data (inf, inflow_inferior_data, NULL);
}
tinfo_to = get_inflow_inferior_data (to);
tinfo_from = get_inflow_inferior_data (from);
+
+ xfree (tinfo_to->run_terminal);
+ xfree (tinfo_to->ttystate);
+
*tinfo_to = *tinfo_from;
+
if (tinfo_from->run_terminal)
tinfo_to->run_terminal
= xstrdup (tinfo_from->run_terminal);
+
+ if (tinfo_from->ttystate)
+ tinfo_to->ttystate
+ = serial_copy_tty_state (stdin_serial, tinfo_from->ttystate);
}
void
}
void
-child_terminal_info (char *args, int from_tty)
+child_terminal_info (struct target_ops *self, const char *args, int from_tty)
{
struct inferior *inf;
struct terminal_info *tinfo;
inf = current_inferior ();
tinfo = get_inflow_inferior_data (inf);
- printf_filtered (_("Inferior's terminal status (currently saved by GDB):\n"));
+ printf_filtered (_("Inferior's terminal status "
+ "(currently saved by GDB):\n"));
/* First the fcntl flags. */
{
#ifndef O_ACCMODE
#define O_ACCMODE (O_RDONLY | O_WRONLY | O_RDWR)
#endif
- /* (O_ACCMODE) parens are to avoid Ultrix header file bug */
+ /* (O_ACCMODE) parens are to avoid Ultrix header file bug. */
switch (flags & (O_ACCMODE))
{
case O_RDONLY:
#ifdef TIOCNOTTY
/* Disconnect the child process from our controlling terminal. On some
systems (SVR4 for example), this may cause a SIGTTOU, so temporarily
- ignore SIGTTOU. */
+ ignore SIGTTOU. */
tty = open ("/dev/tty", O_RDWR);
if (tty > 0)
{
if (ioctl (tty, TIOCSCTTY, 0) == -1)
/* Mention GDB in warning because it will appear in the inferior's
terminal instead of GDB's. */
- warning ("GDB: Failed to set controlling terminal: %s",
+ warning (_("GDB: Failed to set controlling terminal: %s"),
safe_strerror (errno));
#endif
\f
/* Call set_sigint_trap when you need to pass a signal on to an attached
- process when handling SIGINT */
+ process when handling SIGINT. */
static void
pass_signal (int signo)
{
#ifndef _WIN32
- kill (PIDGET (inferior_ptid), SIGINT);
+ kill (ptid_get_pid (inferior_ptid), SIGINT);
#endif
}
ret = setsid ();
if (ret == -1)
- warning ("Failed to create new terminal session: setsid: %s",
+ warning (_("Failed to create new terminal session: setsid: %s"),
safe_strerror (errno));
return ret;
add_info ("terminal", term_info,
_("Print inferior's saved terminal status."));
+ add_setshow_auto_boolean_cmd ("interactive-mode", class_support,
+ &interactive_mode, _("\
+Set whether GDB's standard input is a terminal."), _("\
+Show whether GDB's standard input is a terminal."), _("\
+If on, GDB assumes that standard input is a terminal. In practice, it\n\
+means that GDB should wait for the user to answer queries associated to\n\
+commands entered at the command prompt. If off, GDB assumes that standard\n\
+input is not a terminal, and uses the default answer to all queries.\n\
+If auto (the default), determine which mode to use based on the standard\n\
+input settings."),
+ NULL,
+ show_interactive_mode,
+ &setlist, &showlist);
+
terminal_is_ours = 1;
/* OK, figure out whether we have job control. If neither termios nor
#ifdef _SC_JOB_CONTROL
job_control = sysconf (_SC_JOB_CONTROL);
#else
- job_control = 0; /* have to assume the worst */
+ job_control = 0; /* Have to assume the worst. */
#endif /* _SC_JOB_CONTROL */
#endif /* _POSIX_JOB_CONTROL */
#endif /* HAVE_TERMIOS */
observer_attach_inferior_exit (inflow_inferior_exit);
inflow_inferior_data
- = register_inferior_data_with_cleanup (inflow_inferior_data_cleanup);
+ = register_inferior_data_with_cleanup (NULL, inflow_inferior_data_cleanup);
}
projects / deliverable / binutils-gdb.git / blobdiff