/* Low level interface to ptrace, for GDB when running under Unix.
- Copyright (C) 1986-2015 Free Software Foundation, Inc.
+ Copyright (C) 1986-2017 Free Software Foundation, Inc.
This file is part of GDB.
#include "inflow.h"
#include "gdbcmd.h"
+#ifdef HAVE_TERMIOS_H
+#include <termios.h>
+#endif
+#include "job-control.h"
#ifdef HAVE_SYS_IOCTL_H
#include <sys/ioctl.h>
#define O_NOCTTY 0
#endif
-extern void _initialize_inflow (void);
-
static void pass_signal (int);
static void child_terminal_ours_1 (int);
it when it resumes. */
serial_ttystate ttystate;
-#ifdef PROCESS_GROUP_TYPE
+#ifdef HAVE_TERMIOS_H
/* Process group. Saved and restored just like ttystate. */
- PROCESS_GROUP_TYPE process_group;
+ pid_t process_group;
#endif
/* fcntl flags. Saved and restored just like ttystate. */
};
/* Our own tty state, which we restore every time we need to deal with
- the terminal. This is only set once, when GDB first starts. The
- settings of flags which readline saves and restores and
+ the terminal. This is set once, when GDB first starts, and then
+ whenever we enter/leave TUI mode (gdb_save_tty_state). The
+ settings of flags which readline saves and restores are
unimportant. */
static struct terminal_info our_terminal_info;
-/* Snapshot of our own tty state taken during initialization of GDB.
- This is used as the initial tty state given to each new inferior. */
+/* Snapshot of the initial tty state taken during initialization of
+ GDB, before readline/ncurses have had a chance to change it. This
+ is used as the initial tty state given to each new spawned
+ inferior. Unlike our_terminal_info, this is only ever set
+ once. */
static serial_ttystate initial_gdb_ttystate;
static struct terminal_info *get_inflow_inferior_data (struct inferior *);
-#ifdef PROCESS_GROUP_TYPE
+/* RAII class used to ignore SIGTTOU in a scope. */
+
+class scoped_ignore_sigttou
+{
+public:
+ scoped_ignore_sigttou ()
+ {
+#ifdef SIGTTOU
+ if (job_control)
+ m_osigttou = signal (SIGTTOU, SIG_IGN);
+#endif
+ }
+
+ ~scoped_ignore_sigttou ()
+ {
+#ifdef SIGTTOU
+ if (job_control)
+ signal (SIGTTOU, m_osigttou);
+#endif
+ }
+
+ DISABLE_COPY_AND_ASSIGN (scoped_ignore_sigttou);
+
+private:
+#ifdef SIGTTOU
+ sighandler_t m_osigttou = NULL;
+#endif
+};
+
+#ifdef HAVE_TERMIOS_H
/* Return the process group of the current inferior. */
-PROCESS_GROUP_TYPE
+pid_t
inferior_process_group (void)
{
return get_inflow_inferior_data (current_inferior ())->process_group;
we save our handlers in these two variables and set SIGINT and SIGQUIT
to SIG_IGN. */
-static void (*sigint_ours) ();
-static void (*sigquit_ours) ();
+static sighandler_t sigint_ours;
+static sighandler_t sigquit_ours;
/* The name of the tty (from the `tty' command) that we're giving to
the inferior when starting it up. This is only (and should only
int terminal_is_ours;
-#ifdef PROCESS_GROUP_TYPE
-static PROCESS_GROUP_TYPE
-gdb_getpgrp (void)
-{
- int process_group = -1;
-
-#ifdef HAVE_TERMIOS
- process_group = tcgetpgrp (0);
-#endif
-#ifdef HAVE_TERMIO
- process_group = getpgrp ();
-#endif
-#ifdef HAVE_SGTTY
- ioctl (0, TIOCGPGRP, &process_group);
-#endif
- return process_group;
-}
-#endif
-
-enum gdb_has_a_terminal_flag_enum
- {
- yes, no, have_not_checked
- }
-gdb_has_a_terminal_flag = have_not_checked;
-
-/* The value of the "interactive-mode" setting. */
-static enum auto_boolean interactive_mode = AUTO_BOOLEAN_AUTO;
-
-/* Implement the "show interactive-mode" option. */
-
-static void
-show_interactive_mode (struct ui_file *file, int from_tty,
- struct cmd_list_element *c,
- const char *value)
-{
- if (interactive_mode == AUTO_BOOLEAN_AUTO)
- fprintf_filtered (file, "Debugger's interactive mode "
- "is %s (currently %s).\n",
- value, gdb_has_a_terminal () ? "on" : "off");
- else
- fprintf_filtered (file, "Debugger's interactive mode is %s.\n", value);
-}
-
-/* Set the initial tty state that is to be inherited by new inferiors. */
+/* See terminal.h. */
void
set_initial_gdb_ttystate (void)
{
- initial_gdb_ttystate = serial_get_tty_state (stdin_serial);
-}
+ /* Note we can't do any of this in _initialize_inflow because at
+ that point stdin_serial has not been created yet. */
-/* Does GDB have a terminal (on stdin)? */
-int
-gdb_has_a_terminal (void)
-{
- if (interactive_mode != AUTO_BOOLEAN_AUTO)
- return interactive_mode == AUTO_BOOLEAN_TRUE;
+ initial_gdb_ttystate = serial_get_tty_state (stdin_serial);
- switch (gdb_has_a_terminal_flag)
+ if (initial_gdb_ttystate != NULL)
{
- case yes:
- return 1;
- case no:
- return 0;
- case have_not_checked:
- /* Get all the current tty settings (including whether we have a
- tty at all!). Can't do this in _initialize_inflow because
- serial_fdopen() won't work until the serial_ops_list is
- initialized. */
-
+ our_terminal_info.ttystate
+ = serial_copy_tty_state (stdin_serial, initial_gdb_ttystate);
#ifdef F_GETFL
our_terminal_info.tflags = fcntl (0, F_GETFL, 0);
#endif
-
- gdb_has_a_terminal_flag = no;
- if (stdin_serial != NULL)
- {
- our_terminal_info.ttystate = serial_get_tty_state (stdin_serial);
-
- if (our_terminal_info.ttystate != NULL)
- {
- gdb_has_a_terminal_flag = yes;
-#ifdef PROCESS_GROUP_TYPE
- our_terminal_info.process_group = gdb_getpgrp ();
+#ifdef HAVE_TERMIOS_H
+ our_terminal_info.process_group = tcgetpgrp (0);
#endif
- }
- }
-
- return gdb_has_a_terminal_flag == yes;
- default:
- /* "Can't happen". */
- return 0;
}
}
+/* Does GDB have a terminal (on stdin)? */
+
+static int
+gdb_has_a_terminal (void)
+{
+ return initial_gdb_ttystate != NULL;
+}
+
/* Macro for printing errors from ioctl operations */
#define OOPSY(what) \
before we actually run the inferior. */
void
-child_terminal_init_with_pgrp (int pgrp)
+child_terminal_init (struct target_ops *self)
{
struct inferior *inf = current_inferior ();
struct terminal_info *tinfo = get_inflow_inferior_data (inf);
-#ifdef PROCESS_GROUP_TYPE
+#ifdef HAVE_TERMIOS_H
/* Store the process group even without a terminal as it is used not
only to reset the tty foreground process group, but also to
- interrupt the inferior. */
- tinfo->process_group = pgrp;
+ interrupt the inferior. A child we spawn should be a process
+ group leader (PGID==PID) at this point, though that may not be
+ true if we're attaching to an existing process. */
+ tinfo->process_group = inf->pid;
#endif
if (gdb_has_a_terminal ())
}
}
-void
-child_terminal_init (struct target_ops *self)
-{
-#ifdef PROCESS_GROUP_TYPE
- /* This is for Lynx, and should be cleaned up by having Lynx be a
- separate debugging target with a version of target_terminal_init
- which passes in the process group to a generic routine which does
- all the work (and the non-threaded child_terminal_init can just
- pass in inferior_ptid to the same routine). */
- /* We assume INFERIOR_PID is also the child's process group. */
- child_terminal_init_with_pgrp (ptid_get_pid (inferior_ptid));
-#endif /* PROCESS_GROUP_TYPE */
-}
-
/* Put the inferior's terminal settings into effect.
This is preparation for starting or resuming the inferior.
int result;
#ifdef F_GETFL
- /* Is there a reason this is being done twice? It happens both
- places we use F_SETFL, so I'm inclined to think perhaps there
- is some reason, however perverse. Perhaps not though... */
- result = fcntl (0, F_SETFL, tinfo->tflags);
result = fcntl (0, F_SETFL, tinfo->tflags);
OOPSY ("fcntl F_SETFL");
#endif
- /* Because we were careful to not change in or out of raw mode in
- terminal_ours, we will not change in our out of raw mode with
- this call, so we don't flush any input. */
- result = serial_set_tty_state (stdin_serial,
- tinfo->ttystate);
+ result = serial_set_tty_state (stdin_serial, tinfo->ttystate);
OOPSY ("setting tty state");
if (!job_control)
{
- sigint_ours = (void (*)()) signal (SIGINT, SIG_IGN);
+ sigint_ours = signal (SIGINT, SIG_IGN);
#ifdef SIGQUIT
- sigquit_ours = (void (*)()) signal (SIGQUIT, SIG_IGN);
+ sigquit_ours = signal (SIGQUIT, SIG_IGN);
#endif
}
if (job_control)
{
-#ifdef HAVE_TERMIOS
+#ifdef HAVE_TERMIOS_H
result = tcsetpgrp (0, tinfo->process_group);
if (!inf->attach_flag)
OOPSY ("tcsetpgrp");
#endif
-
-#ifdef HAVE_SGTTY
- result = ioctl (0, TIOCSPGRP, &tinfo->process_group);
- if (!inf->attach_flag)
- OOPSY ("TIOCSPGRP");
-#endif
}
-
}
terminal_is_ours = 0;
}
if (tinfo->run_terminal != NULL || gdb_has_a_terminal () == 0)
return;
-
+ else
{
-#ifdef SIGTTOU
- /* Ignore this signal since it will happen when we try to set the
- pgrp. */
- void (*osigttou) () = NULL;
-#endif
- int result;
+ int result ATTRIBUTE_UNUSED;
-#ifdef SIGTTOU
- if (job_control)
- osigttou = (void (*)()) signal (SIGTTOU, SIG_IGN);
-#endif
+ /* Ignore SIGTTOU since it will happen when we try to set the
+ terminal's pgrp. */
+ scoped_ignore_sigttou ignore_sigttou;
xfree (tinfo->ttystate);
tinfo->ttystate = serial_get_tty_state (stdin_serial);
-#ifdef PROCESS_GROUP_TYPE
+#ifdef HAVE_TERMIOS_H
if (!inf->attach_flag)
- /* If setpgrp failed in terminal_inferior, this would give us
+ /* If tcsetpgrp failed in terminal_inferior, this would give us
our process group instead of the inferior's. See
terminal_inferior for details. */
- tinfo->process_group = gdb_getpgrp ();
+ tinfo->process_group = tcgetpgrp (0);
#endif
- /* Here we used to set ICANON in our ttystate, but I believe this
- was an artifact from before when we used readline. Readline sets
- the tty state when it needs to.
- FIXME-maybe: However, query() expects non-raw mode and doesn't
- use readline. Maybe query should use readline (on the other hand,
- this only matters for HAVE_SGTTY, not termio or termios, I think). */
-
- /* Set tty state to our_ttystate. We don't change in our out of raw
- mode, to avoid flushing input. We need to do the same thing
- regardless of output_only, because we don't have separate
- terminal_is_ours and terminal_is_ours_for_output flags. It's OK,
- though, since readline will deal with raw mode when/if it needs
- to. */
-
- serial_noflush_set_tty_state (stdin_serial, our_terminal_info.ttystate,
- tinfo->ttystate);
+ /* Set tty state to our_ttystate. */
+ serial_set_tty_state (stdin_serial, our_terminal_info.ttystate);
if (job_control)
{
-#ifdef HAVE_TERMIOS
+#ifdef HAVE_TERMIOS_H
result = tcsetpgrp (0, our_terminal_info.process_group);
#if 0
/* This fails on Ultrix with EINVAL if you run the testsuite
safe_strerror (errno));
#endif
#endif /* termios */
-
-#ifdef HAVE_SGTTY
- result = ioctl (0, TIOCSPGRP, &our_terminal_info.process_group);
-#endif
}
-#ifdef SIGTTOU
- if (job_control)
- signal (SIGTTOU, osigttou);
-#endif
-
if (!job_control)
{
signal (SIGINT, sigint_ours);
#ifdef F_GETFL
tinfo->tflags = fcntl (0, F_GETFL, 0);
-
- /* Is there a reason this is being done twice? It happens both
- places we use F_SETFL, so I'm inclined to think perhaps there
- is some reason, however perverse. Perhaps not though... */
- result = fcntl (0, F_SETFL, our_terminal_info.tflags);
result = fcntl (0, F_SETFL, our_terminal_info.tflags);
#endif
}
static void
inflow_inferior_data_cleanup (struct inferior *inf, void *arg)
{
- struct terminal_info *info = arg;
+ struct terminal_info *info = (struct terminal_info *) arg;
xfree (info->run_terminal);
xfree (info->ttystate);
{
struct terminal_info *info;
- info = inferior_data (inf, inflow_inferior_data);
+ info = (struct terminal_info *) inferior_data (inf, inflow_inferior_data);
if (info == NULL)
{
info = XCNEW (struct terminal_info);
{
struct terminal_info *info;
- info = inferior_data (inf, inflow_inferior_data);
+ info = (struct terminal_info *) inferior_data (inf, inflow_inferior_data);
if (info != NULL)
{
xfree (info->run_terminal);
}
void
-term_info (char *arg, int from_tty)
+info_terminal_command (const char *arg, int from_tty)
{
- target_terminal_info (arg, from_tty);
+ target_terminal::info (arg, from_tty);
}
void
printf_filtered ("\n");
}
-#ifdef PROCESS_GROUP_TYPE
+#ifdef HAVE_TERMIOS_H
printf_filtered ("Process group = %d\n", (int) tinfo->process_group);
#endif
tty = open ("/dev/tty", O_RDWR);
if (tty > 0)
{
- void (*osigttou) ();
+ scoped_ignore_sigttou ignore_sigttou;
- osigttou = (void (*)()) signal (SIGTTOU, SIG_IGN);
ioctl (tty, TIOCNOTTY, 0);
close (tty);
- signal (SIGTTOU, osigttou);
}
#endif
#endif
}
-static void (*osig) ();
+static sighandler_t osig;
static int osig_set;
void
if (inf->attach_flag || tinfo->run_terminal)
{
- osig = (void (*)()) signal (SIGINT, pass_signal);
+ osig = signal (SIGINT, pass_signal);
osig_set = 1;
}
else
#endif /* HAVE_SETSID */
}
-/* This is here because this is where we figure out whether we (probably)
- have job control. Just using job_control only does part of it because
- setpgid or setpgrp might not exist on a system without job control.
- It might be considered misplaced (on the other hand, process groups and
- job control are closely related to ttys).
-
- For a more clean implementation, in libiberty, put a setpgid which merely
- calls setpgrp and a setpgrp which does nothing (any system with job control
- will have one or the other). */
-int
-gdb_setpgid (void)
-{
- int retval = 0;
-
- if (job_control)
- {
-#if defined (HAVE_TERMIOS) || defined (TIOCGPGRP)
-#ifdef HAVE_SETPGID
- /* The call setpgid (0, 0) is supposed to work and mean the same
- thing as this, but on Ultrix 4.2A it fails with EPERM (and
- setpgid (getpid (), getpid ()) succeeds). */
- retval = setpgid (getpid (), getpid ());
-#else
-#ifdef HAVE_SETPGRP
-#ifdef SETPGRP_VOID
- retval = setpgrp ();
-#else
- retval = setpgrp (getpid (), getpid ());
-#endif
-#endif /* HAVE_SETPGRP */
-#endif /* HAVE_SETPGID */
-#endif /* defined (HAVE_TERMIOS) || defined (TIOCGPGRP) */
- }
-
- return retval;
-}
-
/* Get all the current tty settings (including whether we have a
tty at all!). We can't do this in _initialize_inflow because
serial_fdopen() won't work until the serial_ops_list is
void
_initialize_inflow (void)
{
- add_info ("terminal", term_info,
+ add_info ("terminal", info_terminal_command,
_("Print inferior's saved terminal status."));
- add_setshow_auto_boolean_cmd ("interactive-mode", class_support,
- &interactive_mode, _("\
-Set whether GDB's standard input is a terminal."), _("\
-Show whether GDB's standard input is a terminal."), _("\
-If on, GDB assumes that standard input is a terminal. In practice, it\n\
-means that GDB should wait for the user to answer queries associated to\n\
-commands entered at the command prompt. If off, GDB assumes that standard\n\
-input is not a terminal, and uses the default answer to all queries.\n\
-If auto (the default), determine which mode to use based on the standard\n\
-input settings."),
- NULL,
- show_interactive_mode,
- &setlist, &showlist);
-
terminal_is_ours = 1;
- /* OK, figure out whether we have job control. If neither termios nor
- sgtty (i.e. termio or go32), leave job_control 0. */
-
-#if defined (HAVE_TERMIOS)
- /* Do all systems with termios have the POSIX way of identifying job
- control? I hope so. */
-#ifdef _POSIX_JOB_CONTROL
- job_control = 1;
-#else
-#ifdef _SC_JOB_CONTROL
- job_control = sysconf (_SC_JOB_CONTROL);
-#else
- job_control = 0; /* Have to assume the worst. */
-#endif /* _SC_JOB_CONTROL */
-#endif /* _POSIX_JOB_CONTROL */
-#endif /* HAVE_TERMIOS */
-
-#ifdef HAVE_SGTTY
-#ifdef TIOCGPGRP
- job_control = 1;
-#else
- job_control = 0;
-#endif /* TIOCGPGRP */
-#endif /* sgtty */
+ /* OK, figure out whether we have job control. */
+ have_job_control ();
observer_attach_inferior_exit (inflow_inferior_exit);
projects / deliverable / binutils-gdb.git / blobdiff