/* Target-struct-independent code to start (run) and stop an inferior
process.
- Copyright (C) 1986-2015 Free Software Foundation, Inc.
+ Copyright (C) 1986-2016 Free Software Foundation, Inc.
This file is part of GDB.
fprintf_filtered (file, _("Mode of the step operation is %s.\n"), value);
}
-/* In asynchronous mode, but simulating synchronous execution. */
-
-int sync_execution = 0;
-
/* proceed and normal_stop use this to notify the user when the
inferior stopped in a different thread than it had been running
in. */
if (has_vforked
&& !non_stop /* Non-stop always resumes both branches. */
- && (!target_is_async_p () || sync_execution)
+ && current_ui->prompt_state == PROMPT_BLOCKED
&& !(follow_child || detach_fork || sched_multi))
{
/* The parent stays blocked inside the vfork syscall until the
/* Detach new forked process? */
if (detach_fork)
{
- struct cleanup *old_chain;
-
/* Before detaching from the child, remove all breakpoints
from it. If we forked, then this has already been taken
care of by infrun.c. If we vforked however, any
CORE_ADDR step_range_start = 0;
CORE_ADDR step_range_end = 0;
struct frame_id step_frame_id = { 0 };
- struct interp *command_interp = NULL;
+ struct thread_fsm *thread_fsm = NULL;
if (!non_stop)
{
step_frame_id = tp->control.step_frame_id;
exception_resume_breakpoint
= clone_momentary_breakpoint (tp->control.exception_resume_breakpoint);
- command_interp = tp->control.command_interp;
+ thread_fsm = tp->thread_fsm;
/* For now, delete the parent's sr breakpoint, otherwise,
parent/child sr breakpoints are considered duplicates,
tp->control.step_range_end = 0;
tp->control.step_frame_id = null_frame_id;
delete_exception_resume_breakpoint (tp);
- tp->control.command_interp = NULL;
+ tp->thread_fsm = NULL;
}
parent = inferior_ptid;
tp->control.step_frame_id = step_frame_id;
tp->control.exception_resume_breakpoint
= exception_resume_breakpoint;
- tp->control.command_interp = command_interp;
+ tp->thread_fsm = thread_fsm;
}
else
{
fprintf_filtered (file, _("Follow exec mode is \"%s\".\n"), value);
}
-/* EXECD_PATHNAME is assumed to be non-NULL. */
+/* EXEC_FILE_TARGET is assumed to be non-NULL. */
static void
-follow_exec (ptid_t ptid, char *execd_pathname)
+follow_exec (ptid_t ptid, char *exec_file_target)
{
struct thread_info *th, *tmp;
struct inferior *inf = current_inferior ();
int pid = ptid_get_pid (ptid);
ptid_t process_ptid;
+ char *exec_file_host;
+ struct cleanup *old_chain;
/* This is an exec event that we actually wish to pay attention to.
Refresh our symbol table to the newly exec'd program, remove any
process_ptid = pid_to_ptid (pid);
printf_unfiltered (_("%s is executing new program: %s\n"),
target_pid_to_str (process_ptid),
- execd_pathname);
+ exec_file_target);
/* We've followed the inferior through an exec. Therefore, the
inferior has essentially been killed & reborn. */
breakpoint_init_inferior (inf_execd);
- if (*gdb_sysroot != '\0')
- {
- char *name = exec_file_find (execd_pathname, NULL);
+ exec_file_host = exec_file_find (exec_file_target, NULL);
+ old_chain = make_cleanup (xfree, exec_file_host);
- execd_pathname = (char *) alloca (strlen (name) + 1);
- strcpy (execd_pathname, name);
- xfree (name);
- }
+ /* If we were unable to map the executable target pathname onto a host
+ pathname, tell the user that. Otherwise GDB's subsequent behavior
+ is confusing. Maybe it would even be better to stop at this point
+ so that the user can specify a file manually before continuing. */
+ if (exec_file_host == NULL)
+ warning (_("Could not load symbols for executable %s.\n"
+ "Do you need \"set sysroot\"?"),
+ exec_file_target);
/* Reset the shared library package. This ensures that we get a
shlib event when the child reaches "_start", at which point the
inf = add_inferior_with_spaces ();
inf->pid = pid;
- target_follow_exec (inf, execd_pathname);
+ target_follow_exec (inf, exec_file_target);
set_current_inferior (inf);
set_current_program_space (inf->pspace);
gdb_assert (current_program_space == inf->pspace);
- /* That a.out is now the one to use. */
- exec_file_attach (execd_pathname, 0);
-
- /* SYMFILE_DEFER_BP_RESET is used as the proper displacement for PIE
- (Position Independent Executable) main symbol file will get applied by
- solib_create_inferior_hook below. breakpoint_re_set would fail to insert
- the breakpoints with the zero displacement. */
-
- symbol_file_add (execd_pathname,
- (inf->symfile_flags
- | SYMFILE_MAINLINE | SYMFILE_DEFER_BP_RESET),
- NULL, 0);
+ /* Attempt to open the exec file. SYMFILE_DEFER_BP_RESET is used
+ because the proper displacement for a PIE (Position Independent
+ Executable) main symbol file will only be computed by
+ solib_create_inferior_hook below. breakpoint_re_set would fail
+ to insert the breakpoints with the zero displacement. */
+ try_open_exec_file (exec_file_host, inf, SYMFILE_DEFER_BP_RESET);
- if ((inf->symfile_flags & SYMFILE_NO_READ) == 0)
- set_initial_language ();
+ do_cleanups (old_chain);
/* If the target can specify a description, read it. Must do this
after flipping to the new executable (because the target supplied
/* The instruction being stepped over triggers a nonsteppable
watchpoint. If true, we'll skip inserting watchpoints. */
int nonsteppable_watchpoint_p;
+
+ /* The thread's global number. */
+ int thread;
};
/* The step-over info of the location that is being stepped over.
static void
set_step_over_info (struct address_space *aspace, CORE_ADDR address,
- int nonsteppable_watchpoint_p)
+ int nonsteppable_watchpoint_p,
+ int thread)
{
step_over_info.aspace = aspace;
step_over_info.address = address;
step_over_info.nonsteppable_watchpoint_p = nonsteppable_watchpoint_p;
+ step_over_info.thread = thread;
}
/* Called when we're not longer stepping over a breakpoint / an
step_over_info.aspace = NULL;
step_over_info.address = 0;
step_over_info.nonsteppable_watchpoint_p = 0;
+ step_over_info.thread = -1;
}
/* See infrun.h. */
/* See infrun.h. */
+int
+thread_is_stepping_over_breakpoint (int thread)
+{
+ return (step_over_info.thread != -1
+ && thread == step_over_info.thread);
+}
+
+/* See infrun.h. */
+
int
stepping_past_nonsteppable_watchpoint (void)
{
{
struct displaced_step_inferior_state *displaced_state;
- if (ex.error != MEMORY_ERROR)
+ if (ex.error != MEMORY_ERROR
+ && ex.error != NOT_SUPPORTED_ERROR)
throw_exception (ex);
if (debug_infrun)
static void prepare_to_wait (struct execution_control_state *ecs);
static int keep_going_stepped_thread (struct thread_info *tp);
static step_over_what thread_still_needs_step_over (struct thread_info *tp);
-static void stop_all_threads (void);
/* Are there any pending step-over requests? If so, run all we can
now and return true. Otherwise, return false. */
static void
infrun_thread_ptid_changed (ptid_t old_ptid, ptid_t new_ptid)
{
- struct displaced_step_request *it;
struct displaced_step_inferior_state *displaced;
if (ptid_equal (inferior_ptid, old_ptid))
int hw_step = 1;
if (execution_direction == EXEC_FORWARD
- && gdbarch_software_single_step_p (gdbarch)
- && gdbarch_software_single_step (gdbarch, get_current_frame ()))
- {
- hw_step = 0;
- }
+ && gdbarch_software_single_step_p (gdbarch))
+ hw_step = !insert_single_step_breakpoints (gdbarch);
+
return hw_step;
}
target_pass_signals ((int) GDB_SIGNAL_LAST, signal_pass);
target_resume (resume_ptid, step, sig);
+
+ target_commit_resume ();
}
/* Resume the inferior, but allow a QUIT. This is useful if the user
stop_all_threads ();
set_step_over_info (get_regcache_aspace (regcache),
- regcache_read_pc (regcache), 0);
+ regcache_read_pc (regcache), 0, tp->global_num);
step = maybe_software_singlestep (gdbarch, pc);
gdb_assert (!(thread_has_single_step_breakpoints_set (tp) && step));
/* Decide the set of threads to ask the target to resume. */
- if ((step || thread_has_single_step_breakpoints_set (tp))
- && tp->control.trap_expected)
+ if (tp->control.trap_expected)
{
/* We're allowing a thread to run past a breakpoint it has
- hit, by single-stepping the thread with the breakpoint
- removed. In which case, we need to single-step only this
- thread, and keep others stopped, as they can miss this
- breakpoint if allowed to run. */
+ hit, either by single-stepping the thread with the breakpoint
+ removed, or by displaced stepping, with the breakpoint inserted.
+ In the former case, we need to single-step only this thread,
+ and keep others stopped, as they can miss this breakpoint if
+ allowed to run. That's not really a problem for displaced
+ stepping, but, we still keep other threads stopped, in case
+ another thread is also stopped for a breakpoint waiting for
+ its turn in the displaced stepping queue. */
resume_ptid = inferior_ptid;
}
else
tp->control.proceed_to_finish = 0;
- tp->control.command_interp = NULL;
tp->control.stepping_command = 0;
/* Discard any remaining commands or status from previous stop. */
static step_over_what
thread_still_needs_step_over (struct thread_info *tp)
{
- struct inferior *inf = find_inferior_ptid (tp->ptid);
step_over_what what = 0;
if (thread_still_needs_step_over_bp (tp))
struct execution_control_state ecss;
struct execution_control_state *ecs = &ecss;
struct cleanup *old_chain;
+ struct cleanup *defer_resume_cleanup;
int started;
/* If we're stopped at a fork/vfork, follow the branch set by the
if (siggnal != GDB_SIGNAL_DEFAULT)
tp->suspend.stop_signal = siggnal;
- /* Record the interpreter that issued the execution command that
- caused this thread to resume. If the top level interpreter is
- MI/async, and the execution command was a CLI command
- (next/step/etc.), we'll want to print stop event output to the MI
- console channel (the stepped-to line, etc.), as if the user
- entered the execution command on a real GDB console. */
- tp->control.command_interp = command_interp ();
-
resume_ptid = user_visible_resume_ptid (tp->control.stepping_command);
/* If an exception is thrown from this point on, make sure to
until the target stops again. */
tp->prev_pc = regcache_read_pc (regcache);
+ defer_resume_cleanup = make_cleanup_defer_target_commit_resume ();
+
started = start_step_over ();
if (step_over_info_valid_p ())
error (_("Command aborted."));
}
+ do_cleanups (defer_resume_cleanup);
+ target_commit_resume ();
+
discard_cleanups (old_chain);
/* Tell the event loop to wait for it to stop. If the target
static void
reinstall_readline_callback_handler_cleanup (void *arg)
{
- if (!interpreter_async)
+ struct ui *ui = current_ui;
+
+ if (!ui->async)
{
/* We're not going back to the top level event loop yet. Don't
install the readline callback, as it'd prep the terminal,
return;
}
- if (async_command_editing_p && !sync_execution)
+ if (ui->command_editing && ui->prompt_state != PROMPT_BLOCKED)
gdb_rl_callback_handler_reinstall ();
}
struct thread_info *thr = ecs->event_thread;
if (thr != NULL && thr->thread_fsm != NULL)
- thread_fsm_clean_up (thr->thread_fsm);
+ thread_fsm_clean_up (thr->thread_fsm, thr);
if (!non_stop)
{
continue;
switch_to_thread (thr->ptid);
- thread_fsm_clean_up (thr->thread_fsm);
+ thread_fsm_clean_up (thr->thread_fsm, thr);
}
if (ecs->event_thread != NULL)
}
}
-/* A cleanup that restores the execution direction to the value saved
- in *ARG. */
+/* Helper for all_uis_check_sync_execution_done that works on the
+ current UI. */
static void
-restore_execution_direction (void *arg)
+check_curr_ui_sync_execution_done (void)
+{
+ struct ui *ui = current_ui;
+
+ if (ui->prompt_state == PROMPT_NEEDED
+ && ui->async
+ && !gdb_in_secondary_prompt_p (ui))
+ {
+ target_terminal_ours ();
+ observer_notify_sync_execution_done ();
+ ui_register_input_event_handler (ui);
+ }
+}
+
+/* See infrun.h. */
+
+void
+all_uis_check_sync_execution_done (void)
{
- enum exec_direction_kind *save_exec_dir = (enum exec_direction_kind *) arg;
+ SWITCH_THRU_ALL_UIS ()
+ {
+ check_curr_ui_sync_execution_done ();
+ }
+}
+
+/* See infrun.h. */
- execution_direction = *save_exec_dir;
+void
+all_uis_on_sync_execution_starting (void)
+{
+ SWITCH_THRU_ALL_UIS ()
+ {
+ if (current_ui->prompt_state == PROMPT_NEEDED)
+ async_disable_stdin ();
+ }
}
/* Asynchronous version of wait_for_inferior. It is called by the
struct execution_control_state *ecs = &ecss;
struct cleanup *old_chain = make_cleanup (null_cleanup, NULL);
struct cleanup *ts_old_chain;
- int was_sync = sync_execution;
- enum exec_direction_kind save_exec_dir = execution_direction;
int cmd_done = 0;
ptid_t waiton_ptid = minus_one_ptid;
memset (ecs, 0, sizeof (*ecs));
+ /* Events are always processed with the main UI as current UI. This
+ way, warnings, debug output, etc. are always consistently sent to
+ the main console. */
+ scoped_restore save_ui = make_scoped_restore (¤t_ui, main_ui);
+
/* End up with readline processing input, if necessary. */
make_cleanup (reinstall_readline_callback_handler_cleanup, NULL);
event. */
target_dcache_invalidate ();
- make_cleanup (restore_execution_direction, &save_exec_dir);
- execution_direction = target_execution_direction ();
+ scoped_restore save_exec_dir
+ = make_scoped_restore (&execution_direction, target_execution_direction ());
ecs->ptid = do_target_wait (waiton_ptid, &ecs->ws,
target_can_async_p () ? TARGET_WNOHANG : 0);
struct thread_fsm *thread_fsm = thr->thread_fsm;
if (thread_fsm != NULL)
- should_stop = thread_fsm_should_stop (thread_fsm);
+ should_stop = thread_fsm_should_stop (thread_fsm, thr);
}
if (!should_stop)
/* Revert thread and frame. */
do_cleanups (old_chain);
- /* If the inferior was in sync execution mode, and now isn't,
- restore the prompt (a synchronous execution command has finished,
- and we're ready for input). */
- if (interpreter_async && was_sync && !sync_execution)
- observer_notify_sync_execution_done ();
+ /* If a UI was in sync execution mode, and now isn't, restore its
+ prompt (a synchronous execution command has finished, and we're
+ ready for input). */
+ all_uis_check_sync_execution_done ();
if (cmd_done
- && !was_sync
&& exec_done_display_p
&& (ptid_equal (inferior_ptid, null_ptid)
|| !is_running (inferior_ptid)))
/* Set the cached copy of the last ptid/waitstatus. */
-static void
+void
set_last_target_status (ptid_t ptid, struct target_waitstatus status)
{
target_last_wait_ptid = ptid;
}
}
-/* Stop all threads. */
+/* A cleanup that disables thread create/exit events. */
static void
+disable_thread_events (void *arg)
+{
+ target_thread_events (0);
+}
+
+/* See infrun.h. */
+
+void
stop_all_threads (void)
{
/* We may need multiple passes to discover all threads. */
entry_ptid = inferior_ptid;
old_chain = make_cleanup (switch_to_thread_cleanup, &entry_ptid);
+ target_thread_events (1);
+ make_cleanup (disable_thread_events, NULL);
+
/* Request threads to stop, and then wait for the stops. Because
threads we already know about can spawn more threads while we're
trying to stop them, and we only learn about new threads when we
{
/* All resumed threads exited. */
}
- else if (ws.kind == TARGET_WAITKIND_EXITED
+ else if (ws.kind == TARGET_WAITKIND_THREAD_EXITED
+ || ws.kind == TARGET_WAITKIND_EXITED
|| ws.kind == TARGET_WAITKIND_SIGNALLED)
{
if (debug_infrun)
}
else
{
+ struct inferior *inf;
+
t = find_thread_ptid (event_ptid);
if (t == NULL)
t = add_thread (event_ptid);
t->resumed = 0;
t->control.may_range_step = 0;
+ /* This may be the first time we see the inferior report
+ a stop. */
+ inf = find_inferior_ptid (event_ptid);
+ if (inf->needs_setup)
+ {
+ switch_to_thread_no_regs (t);
+ setup_inferior (0);
+ }
+
if (ws.kind == TARGET_WAITKIND_STOPPED
&& ws.value.sig == GDB_SIGNAL_0)
{
{
enum gdb_signal sig;
struct regcache *regcache;
- struct address_space *aspace;
if (debug_infrun)
{
fprintf_unfiltered (gdb_stdlog, "infrun: stop_all_threads done\n");
}
+/* Handle a TARGET_WAITKIND_NO_RESUMED event. */
+
+static int
+handle_no_resumed (struct execution_control_state *ecs)
+{
+ struct inferior *inf;
+ struct thread_info *thread;
+
+ if (target_can_async_p ())
+ {
+ struct ui *ui;
+ int any_sync = 0;
+
+ ALL_UIS (ui)
+ {
+ if (ui->prompt_state == PROMPT_BLOCKED)
+ {
+ any_sync = 1;
+ break;
+ }
+ }
+ if (!any_sync)
+ {
+ /* There were no unwaited-for children left in the target, but,
+ we're not synchronously waiting for events either. Just
+ ignore. */
+
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: TARGET_WAITKIND_NO_RESUMED "
+ "(ignoring: bg)\n");
+ prepare_to_wait (ecs);
+ return 1;
+ }
+ }
+
+ /* Otherwise, if we were running a synchronous execution command, we
+ may need to cancel it and give the user back the terminal.
+
+ In non-stop mode, the target can't tell whether we've already
+ consumed previous stop events, so it can end up sending us a
+ no-resumed event like so:
+
+ #0 - thread 1 is left stopped
+
+ #1 - thread 2 is resumed and hits breakpoint
+ -> TARGET_WAITKIND_STOPPED
+
+ #2 - thread 3 is resumed and exits
+ this is the last resumed thread, so
+ -> TARGET_WAITKIND_NO_RESUMED
+
+ #3 - gdb processes stop for thread 2 and decides to re-resume
+ it.
+
+ #4 - gdb processes the TARGET_WAITKIND_NO_RESUMED event.
+ thread 2 is now resumed, so the event should be ignored.
+
+ IOW, if the stop for thread 2 doesn't end a foreground command,
+ then we need to ignore the following TARGET_WAITKIND_NO_RESUMED
+ event. But it could be that the event meant that thread 2 itself
+ (or whatever other thread was the last resumed thread) exited.
+
+ To address this we refresh the thread list and check whether we
+ have resumed threads _now_. In the example above, this removes
+ thread 3 from the thread list. If thread 2 was re-resumed, we
+ ignore this event. If we find no thread resumed, then we cancel
+ the synchronous command show "no unwaited-for " to the user. */
+ update_thread_list ();
+
+ ALL_NON_EXITED_THREADS (thread)
+ {
+ if (thread->executing
+ || thread->suspend.waitstatus_pending_p)
+ {
+ /* There were no unwaited-for children left in the target at
+ some point, but there are now. Just ignore. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: TARGET_WAITKIND_NO_RESUMED "
+ "(ignoring: found resumed)\n");
+ prepare_to_wait (ecs);
+ return 1;
+ }
+ }
+
+ /* Note however that we may find no resumed thread because the whole
+ process exited meanwhile (thus updating the thread list results
+ in an empty thread list). In this case we know we'll be getting
+ a process exit event shortly. */
+ ALL_INFERIORS (inf)
+ {
+ if (inf->pid == 0)
+ continue;
+
+ thread = any_live_thread_of_process (inf->pid);
+ if (thread == NULL)
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: TARGET_WAITKIND_NO_RESUMED "
+ "(expect process exit)\n");
+ prepare_to_wait (ecs);
+ return 1;
+ }
+ }
+
+ /* Go ahead and report the event. */
+ return 0;
+}
+
/* Given an execution control state that has been freshly filled in by
an event from the inferior, figure out what it means and take
appropriate action.
return;
}
- if (ecs->ws.kind == TARGET_WAITKIND_NO_RESUMED
- && target_can_async_p () && !sync_execution)
+ if (ecs->ws.kind == TARGET_WAITKIND_THREAD_EXITED)
{
- /* There were no unwaited-for children left in the target, but,
- we're not synchronously waiting for events either. Just
- ignore. Otherwise, if we were running a synchronous
- execution command, we need to cancel it and give the user
- back the terminal. */
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog,
- "infrun: TARGET_WAITKIND_NO_RESUMED (ignoring)\n");
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_THREAD_EXITED\n");
prepare_to_wait (ecs);
return;
}
+ if (ecs->ws.kind == TARGET_WAITKIND_NO_RESUMED
+ && handle_no_resumed (ecs))
+ return;
+
/* Cache the last pid/waitstatus. */
set_last_target_status (ecs->ptid, ecs->ws);
prepare_to_wait (ecs);
return;
+ case TARGET_WAITKIND_THREAD_CREATED:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_THREAD_CREATED\n");
+ if (!ptid_equal (ecs->ptid, inferior_ptid))
+ context_switch (ecs->ptid);
+ if (!switch_back_to_stepped_thread (ecs))
+ keep_going (ecs);
+ return;
+
case TARGET_WAITKIND_EXITED:
case TARGET_WAITKIND_SIGNALLED:
if (debug_infrun)
}
gdb_flush (gdb_stdout);
- target_mourn_inferior ();
+ target_mourn_inferior (inferior_ptid);
stop_print_frame = 0;
stop_waiting (ecs);
return;
parent = ecs->ptid;
child = ecs->ws.value.related_pid;
+ /* At this point, the parent is marked running, and the
+ child is marked stopped. */
+
+ /* If not resuming the parent, mark it stopped. */
+ if (follow_child && !detach_fork && !non_stop && !sched_multi)
+ set_running (parent, 0);
+
+ /* If resuming the child, mark it running. */
+ if (follow_child || (!detach_fork && (non_stop || sched_multi)))
+ set_running (child, 1);
+
/* In non-stop mode, also resume the other branch. */
if (!detach_fork && (non_stop
|| (sched_multi && target_is_non_stop_p ())))
restart_threads (struct thread_info *event_thread)
{
struct thread_info *tp;
- struct thread_info *step_over = NULL;
/* In case the instruction just stepped spawned a new thread. */
update_thread_list ();
context_switch (ecs->ptid);
if (deprecated_context_hook)
- deprecated_context_hook (pid_to_thread_id (ecs->ptid));
+ deprecated_context_hook (ptid_to_global_thread_id (ecs->ptid));
}
/* At this point, get hold of the now-current thread's frame. */
keep_going_stepped_thread (struct thread_info *tp)
{
struct frame_info *frame;
- struct gdbarch *gdbarch;
struct execution_control_state ecss;
struct execution_control_state *ecs = &ecss;
stop_pc = regcache_read_pc (get_thread_regcache (tp->ptid));
frame = get_current_frame ();
- gdbarch = get_frame_arch (frame);
/* If the PC of the thread we were trying to single-step has
changed, then that thread has trapped or been signaled, but the
/* set_momentary_breakpoint_at_pc invalidates FRAME. */
frame = NULL;
- bp->thread = tp->num;
+ bp->thread = tp->global_num;
inferior_thread ()->control.exception_resume_breakpoint = bp;
}
}
bp = set_momentary_breakpoint_at_pc (get_frame_arch (frame),
handler, bp_exception_resume);
- bp->thread = tp->num;
+ bp->thread = tp->global_num;
inferior_thread ()->control.exception_resume_breakpoint = bp;
}
&& (remove_wps || !use_displaced_stepping (ecs->event_thread)))
{
set_step_over_info (get_regcache_aspace (regcache),
- regcache_read_pc (regcache), remove_wps);
+ regcache_read_pc (regcache), remove_wps,
+ ecs->event_thread->global_num);
}
else if (remove_wps)
- set_step_over_info (NULL, 0, remove_wps);
+ set_step_over_info (NULL, 0, remove_wps, -1);
/* If we now need to do an in-line step-over, we need to stop
all other threads. Note this must be done before
}
}
+/* Some targets/architectures can do extra processing/display of
+ segmentation faults. E.g., Intel MPX boundary faults.
+ Call the architecture dependent function to handle the fault. */
+
+static void
+handle_segmentation_fault (struct ui_out *uiout)
+{
+ struct regcache *regcache = get_current_regcache ();
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+
+ if (gdbarch_handle_segmentation_fault_p (gdbarch))
+ gdbarch_handle_segmentation_fault (gdbarch, uiout);
+}
+
void
print_signal_received_reason (struct ui_out *uiout, enum gdb_signal siggnal)
{
+ struct thread_info *thr = inferior_thread ();
+
annotate_signal ();
- if (siggnal == GDB_SIGNAL_0 && !ui_out_is_mi_like_p (uiout))
+ if (ui_out_is_mi_like_p (uiout))
+ ;
+ else if (show_thread_that_caused_stop ())
{
- struct thread_info *t = inferior_thread ();
+ const char *name;
- ui_out_text (uiout, "\n[");
- ui_out_field_string (uiout, "thread-name",
- target_pid_to_str (t->ptid));
- ui_out_field_fmt (uiout, "thread-id", "] #%d", t->num);
- ui_out_text (uiout, " stopped");
+ ui_out_text (uiout, "\nThread ");
+ ui_out_field_fmt (uiout, "thread-id", "%s", print_thread_id (thr));
+
+ name = thr->name != NULL ? thr->name : target_thread_name (thr);
+ if (name != NULL)
+ {
+ ui_out_text (uiout, " \"");
+ ui_out_field_fmt (uiout, "name", "%s", name);
+ ui_out_text (uiout, "\"");
+ }
}
+ else
+ ui_out_text (uiout, "\nProgram");
+
+ if (siggnal == GDB_SIGNAL_0 && !ui_out_is_mi_like_p (uiout))
+ ui_out_text (uiout, " stopped");
else
{
- ui_out_text (uiout, "\nProgram received signal ");
+ ui_out_text (uiout, " received signal ");
annotate_signal_name ();
if (ui_out_is_mi_like_p (uiout))
ui_out_field_string
annotate_signal_string ();
ui_out_field_string (uiout, "signal-meaning",
gdb_signal_to_string (siggnal));
+
+ if (siggnal == GDB_SIGNAL_SEGV)
+ handle_segmentation_fault (uiout);
+
annotate_signal_string_end ();
}
ui_out_text (uiout, ".\n");
print_stack_frame (get_selected_frame (NULL), 0, source_flag, 1);
}
-/* Cleanup that restores a previous current uiout. */
-
-static void
-restore_current_uiout_cleanup (void *arg)
-{
- struct ui_out *saved_uiout = (struct ui_out *) arg;
-
- current_uiout = saved_uiout;
-}
-
/* See infrun.h. */
void
print_stop_event (struct ui_out *uiout)
{
- struct cleanup *old_chain;
struct target_waitstatus last;
ptid_t last_ptid;
struct thread_info *tp;
get_last_target_status (&last_ptid, &last);
- old_chain = make_cleanup (restore_current_uiout_cleanup, current_uiout);
- current_uiout = uiout;
-
- print_stop_location (&last);
+ {
+ scoped_restore save_uiout = make_scoped_restore (¤t_uiout, uiout);
- /* Display the auto-display expressions. */
- do_displays ();
+ print_stop_location (&last);
- do_cleanups (old_chain);
+ /* Display the auto-display expressions. */
+ do_displays ();
+ }
tp = inferior_thread ();
if (tp->thread_fsm != NULL
&& last.kind != TARGET_WAITKIND_EXITED
&& last.kind != TARGET_WAITKIND_NO_RESUMED)
{
- target_terminal_ours_for_output ();
- printf_filtered (_("[Switching to %s]\n"),
- target_pid_to_str (inferior_ptid));
- annotate_thread_changed ();
+ SWITCH_THRU_ALL_UIS ()
+ {
+ target_terminal_ours_for_output ();
+ printf_filtered (_("[Switching to %s]\n"),
+ target_pid_to_str (inferior_ptid));
+ annotate_thread_changed ();
+ }
previous_inferior_ptid = inferior_ptid;
}
if (last.kind == TARGET_WAITKIND_NO_RESUMED)
{
- gdb_assert (sync_execution || !target_can_async_p ());
-
- target_terminal_ours_for_output ();
- printf_filtered (_("No unwaited-for children left.\n"));
+ SWITCH_THRU_ALL_UIS ()
+ if (current_ui->prompt_state == PROMPT_BLOCKED)
+ {
+ target_terminal_ours_for_output ();
+ printf_filtered (_("No unwaited-for children left.\n"));
+ }
}
/* Note: this depends on the update_thread_list call above. */
if (stopped_by_random_signal)
disable_current_display ();
- target_terminal_ours ();
- async_enable_stdin ();
+ SWITCH_THRU_ALL_UIS ()
+ {
+ async_enable_stdin ();
+ }
/* Let the user/frontend see the threads as stopped. */
do_cleanups (old_chain);
"to change these tables.\n"));
}
-/* Check if it makes sense to read $_siginfo from the current thread
- at this point. If not, throw an error. */
-
-static void
-validate_siginfo_access (void)
-{
- /* No current inferior, no siginfo. */
- if (ptid_equal (inferior_ptid, null_ptid))
- error (_("No thread selected."));
-
- /* Don't try to read from a dead thread. */
- if (is_exited (inferior_ptid))
- error (_("The current thread has terminated"));
-
- /* ... or from a spinning thread. */
- if (is_running (inferior_ptid))
- error (_("Selected thread is running."));
-}
-
/* The $_siginfo convenience variable is a bit special. We don't know
for sure the type of the value until we actually have a chance to
fetch the data. The type can change depending on gdbarch, so it is
{
LONGEST transferred;
- validate_siginfo_access ();
+ /* If we can access registers, so can we access $_siginfo. Likewise
+ vice versa. */
+ validate_registers_access ();
transferred =
target_read (¤t_target, TARGET_OBJECT_SIGNAL_INFO,
{
LONGEST transferred;
- validate_siginfo_access ();
+ /* If we can access registers, so can we access $_siginfo. Likewise
+ vice versa. */
+ validate_registers_access ();
transferred = target_write (¤t_target,
TARGET_OBJECT_SIGNAL_INFO,
signal_print[GDB_SIGNAL_WAITING] = 0;
signal_stop[GDB_SIGNAL_CANCEL] = 0;
signal_print[GDB_SIGNAL_CANCEL] = 0;
+ signal_stop[GDB_SIGNAL_LIBRT] = 0;
+ signal_print[GDB_SIGNAL_LIBRT] = 0;
/* Update cached state. */
signal_cache_update (-1);
projects / deliverable / binutils-gdb.git / blobdiff