/* Target-struct-independent code to start (run) and stop an inferior process.
- Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
- 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
+
+ Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994,
+ 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 Free Software
+ Foundation, Inc.
This file is part of GDB.
#include <signal.h>
#include "inf-loop.h"
#include "regcache.h"
+#include "value.h"
/* Prototypes for local functions */
#endif
-/* Some machines have trampoline code that sits between function callers
- and the actual functions themselves. If this machine doesn't have
- such things, disable their processing. */
-
-#ifndef SKIP_TRAMPOLINE_CODE
-#define SKIP_TRAMPOLINE_CODE(pc) 0
-#endif
-
/* Dynamic function trampolines are similar to solib trampolines in that they
are between the caller and the callee. The difference is that when you
enter a dynamic trampoline, you can't determine the callee's address. Some
#define SKIP_SOLIB_RESOLVER(pc) 0
#endif
-/* For SVR4 shared libraries, each call goes through a small piece of
- trampoline code in the ".plt" section. IN_SOLIB_CALL_TRAMPOLINE evaluates
- to nonzero if we are current stopped in one of these. */
-
-#ifndef IN_SOLIB_CALL_TRAMPOLINE
-#define IN_SOLIB_CALL_TRAMPOLINE(pc,name) 0
-#endif
-
/* In some shared library schemes, the return path from a shared library
call may need to go through a trampoline too. */
static void
default_skip_permanent_breakpoint (void)
{
- error_begin ();
- fprintf_filtered (gdb_stderr, "\
+ error ("\
The program is stopped at a permanent breakpoint, but GDB does not know\n\
how to step past a permanent breakpoint on this architecture. Try using\n\
-a command like `return' or `jump' to continue execution.\n");
- return_to_top_level (RETURN_ERROR);
+a command like `return' or `jump' to continue execution.");
}
#endif
{
add_thread (ecs->ptid);
-#ifdef UI_OUT
ui_out_text (uiout, "[New ");
ui_out_text (uiout, target_pid_or_tid_to_str (ecs->ptid));
ui_out_text (uiout, "]\n");
-#else
- printf_filtered ("[New %s]\n", target_pid_or_tid_to_str (ecs->ptid));
-#endif
#if 0
/* NOTE: This block is ONLY meant to be invoked in case of a
remove_breakpoints ();
/* Check for any newly added shared libraries if we're
- supposed to be adding them automatically. */
- if (auto_solib_add)
- {
- /* Switch terminal for any messages produced by
- breakpoint_re_set. */
- target_terminal_ours_for_output ();
- SOLIB_ADD (NULL, 0, NULL);
- target_terminal_inferior ();
- }
+ supposed to be adding them automatically. Switch
+ terminal for any messages produced by
+ breakpoint_re_set. */
+ target_terminal_ours_for_output ();
+ SOLIB_ADD (NULL, 0, NULL, auto_solib_add);
+ target_terminal_inferior ();
/* Reinsert breakpoints and continue. */
if (breakpoints_inserted)
breakpoints_inserted = 0;
/* Check for any newly added shared libraries if we're
- supposed to be adding them automatically. */
- if (auto_solib_add)
- {
- /* Switch terminal for any messages produced by
- breakpoint_re_set. */
- target_terminal_ours_for_output ();
- SOLIB_ADD (NULL, 0, NULL);
- target_terminal_inferior ();
- }
+ supposed to be adding them automatically. Switch
+ terminal for any messages produced by
+ breakpoint_re_set. */
+ target_terminal_ours_for_output ();
+ SOLIB_ADD (NULL, 0, NULL, auto_solib_add);
+ target_terminal_inferior ();
/* Try to reenable shared library breakpoints, additional
code segments in shared libraries might be mapped in now. */
case END_STEPPING_RANGE:
/* We are done with a step/next/si/ni command. */
/* For now print nothing. */
-#ifdef UI_OUT
/* Print a message only if not in the middle of doing a "step n"
operation for n > 1 */
if (!step_multi || !stop_step)
if (ui_out_is_mi_like_p (uiout))
ui_out_field_string (uiout, "reason", "end-stepping-range");
-#endif
break;
case BREAKPOINT_HIT:
/* We found a breakpoint. */
break;
case SIGNAL_EXITED:
/* The inferior was terminated by a signal. */
-#ifdef UI_OUT
annotate_signalled ();
if (ui_out_is_mi_like_p (uiout))
ui_out_field_string (uiout, "reason", "exited-signalled");
annotate_signal_string_end ();
ui_out_text (uiout, ".\n");
ui_out_text (uiout, "The program no longer exists.\n");
-#else
- annotate_signalled ();
- printf_filtered ("\nProgram terminated with signal ");
- annotate_signal_name ();
- printf_filtered ("%s", target_signal_to_name (stop_info));
- annotate_signal_name_end ();
- printf_filtered (", ");
- annotate_signal_string ();
- printf_filtered ("%s", target_signal_to_string (stop_info));
- annotate_signal_string_end ();
- printf_filtered (".\n");
-
- printf_filtered ("The program no longer exists.\n");
- gdb_flush (gdb_stdout);
-#endif
break;
case EXITED:
/* The inferior program is finished. */
-#ifdef UI_OUT
annotate_exited (stop_info);
if (stop_info)
{
ui_out_field_string (uiout, "reason", "exited-normally");
ui_out_text (uiout, "\nProgram exited normally.\n");
}
-#else
- annotate_exited (stop_info);
- if (stop_info)
- printf_filtered ("\nProgram exited with code 0%o.\n",
- (unsigned int) stop_info);
- else
- printf_filtered ("\nProgram exited normally.\n");
-#endif
break;
case SIGNAL_RECEIVED:
/* Signal received. The signal table tells us to print about
it. */
-#ifdef UI_OUT
annotate_signal ();
ui_out_text (uiout, "\nProgram received signal ");
annotate_signal_name ();
ui_out_field_string (uiout, "signal-meaning", target_signal_to_string (stop_info));
annotate_signal_string_end ();
ui_out_text (uiout, ".\n");
-#else
- annotate_signal ();
- printf_filtered ("\nProgram received signal ");
- annotate_signal_name ();
- printf_filtered ("%s", target_signal_to_name (stop_info));
- annotate_signal_name_end ();
- printf_filtered (", ");
- annotate_signal_string ();
- printf_filtered ("%s", target_signal_to_string (stop_info));
- annotate_signal_string_end ();
- printf_filtered (".\n");
- gdb_flush (gdb_stdout);
-#endif
break;
default:
internal_error (__FILE__, __LINE__,
internal_error (__FILE__, __LINE__,
"Unknown value.");
}
-#ifdef UI_OUT
/* For mi, have the same behavior every time we stop:
print everything but the source line. */
if (ui_out_is_mi_like_p (uiout))
source_flag = LOC_AND_ADDRESS;
-#endif
-#ifdef UI_OUT
if (ui_out_is_mi_like_p (uiout))
ui_out_field_int (uiout, "thread-id",
pid_to_thread_id (inferior_ptid));
-#endif
/* The behavior of this routine with respect to the source
flag is:
SRC_LINE: Print only source line
projects / deliverable / binutils-gdb.git / blobdiff