#include "symtab.h"
#include "frame.h"
#include "inferior.h"
+#include "exceptions.h"
#include "breakpoint.h"
#include "gdb_wait.h"
#include "gdbcore.h"
static int hook_stop_stub (void *);
-static void delete_breakpoint_current_contents (void *);
-
static int restore_selected_frame (void *);
static void build_infrun (void);
static int may_follow_exec = MAY_FOLLOW_EXEC;
+static int debug_infrun = 0;
+
/* If the program uses ELF-style shared libraries, then calls to
functions in shared libraries go through stubs, which live in a
table called the PLT (Procedure Linkage Table). The first time the
#define SOLIB_IN_DYNAMIC_LINKER(pid,pc) 0
#endif
-/* On MIPS16, a function that returns a floating point value may call
- a library helper function to copy the return value to a floating point
- register. The IGNORE_HELPER_CALL macro returns non-zero if we
- should ignore (i.e. step over) this function call. */
-#ifndef IGNORE_HELPER_CALL
-#define IGNORE_HELPER_CALL(pc) 0
-#endif
-
-/* On some systems, the PC may be left pointing at an instruction that won't
- actually be executed. This is usually indicated by a bit in the PSW. If
- we find ourselves in such a state, then we step the target beyond the
- nullified instruction before returning control to the user so as to avoid
- confusion. */
-
-#ifndef INSTRUCTION_NULLIFIED
-#define INSTRUCTION_NULLIFIED 0
-#endif
-
/* We can't step off a permanent breakpoint in the ordinary way, because we
can't remove it. Instead, we have to advance the PC to the next
instruction. This macro should expand to a pointer to a function that
static int stop_on_solib_events;
#endif
-#ifdef HP_OS_BUG
-/* Nonzero if the next time we try to continue the inferior, it will
- step one instruction and generate a spurious trace trap.
- This is used to compensate for a bug in HP-UX. */
-
-static int trap_expected_after_continue;
-#endif
-
/* Nonzero means expecting a trace trap
and should stop the inferior and return silently when it happens. */
static int stop_print_frame;
static struct breakpoint *step_resume_breakpoint = NULL;
-static struct breakpoint *through_sigtramp_breakpoint = NULL;
-
-/* On some platforms (e.g., HP-UX), hardware watchpoints have bad
- interactions with an inferior that is running a kernel function
- (aka, a system call or "syscall"). wait_for_inferior therefore
- may have a need to know when the inferior is in a syscall. This
- is a count of the number of inferior threads which are known to
- currently be running in a syscall. */
-static int number_of_threads_in_syscalls;
/* This is a cached copy of the pid/waitstatus of the last event
- returned by target_wait()/target_wait_hook(). This information is
- returned by get_last_target_status(). */
+ returned by target_wait()/deprecated_target_wait_hook(). This
+ information is returned by get_last_target_status(). */
static ptid_t target_last_wait_ptid;
static struct target_waitstatus target_last_waitstatus;
step_range_start = 0;
step_range_end = 0;
- /* If there was one, it's gone now. */
- through_sigtramp_breakpoint = NULL;
-
/* What is this a.out's name? */
printf_unfiltered ("Executing new program: %s\n", execd_pathname);
static void
set_schedlock_func (char *args, int from_tty, struct cmd_list_element *c)
{
- /* NOTE: cagney/2002-03-17: The add_show_from_set() function clones
- the set command passed as a parameter. The clone operation will
- include (BUG?) any ``set'' command callback, if present.
- Commands like ``info set'' call all the ``show'' command
- callbacks. Unfortunately, for ``show'' commands cloned from
- ``set'', this includes callbacks belonging to ``set'' commands.
- Making this worse, this only occures if add_show_from_set() is
- called after add_cmd_sfunc() (BUG?). */
+ /* NOTE: cagney/2002-03-17: The deprecated_add_show_from_set()
+ function clones the set command passed as a parameter. The clone
+ operation will include (BUG?) any ``set'' command callback, if
+ present. Commands like ``info set'' call all the ``show''
+ command callbacks. Unfortunately, for ``show'' commands cloned
+ from ``set'', this includes callbacks belonging to ``set''
+ commands. Making this worse, this only occures if
+ deprecated_add_show_from_set() is called after add_cmd_sfunc()
+ (BUG?). */
if (cmd_type (c) == set_cmd)
if (!target_can_lock_scheduler)
{
struct cleanup *old_cleanups = make_cleanup (resume_cleanups, 0);
QUIT;
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: resume (step=%d, signal=%d)\n",
+ step, sig);
+
/* FIXME: calling breakpoint_here_p (read_pc ()) three times! */
singlestep_ptid = inferior_ptid;
}
- /* Handle any optimized stores to the inferior NOW... */
-#ifdef DO_DEFERRED_STORES
- DO_DEFERRED_STORES;
-#endif
-
/* If there were any forks/vforks/execs that were caught and are
now to be followed, then do so. */
switch (pending_follow.kind)
resume_ptid = RESUME_ALL; /* Default */
- if ((step || singlestep_breakpoints_inserted_p) &&
- (stepping_past_singlestep_breakpoint
- || (!breakpoints_inserted && breakpoint_here_p (read_pc ()))))
+ if ((step || singlestep_breakpoints_inserted_p)
+ && (stepping_past_singlestep_breakpoint
+ || (!breakpoints_inserted && breakpoint_here_p (read_pc ()))))
{
/* Stepping past a breakpoint without inserting breakpoints.
Make sure only the current thread gets to step, so that
resume_ptid = inferior_ptid;
}
- if ((scheduler_mode == schedlock_on) ||
- (scheduler_mode == schedlock_step &&
- (step || singlestep_breakpoints_inserted_p)))
+ if ((scheduler_mode == schedlock_on)
+ || (scheduler_mode == schedlock_step
+ && (step || singlestep_breakpoints_inserted_p)))
{
/* User-settable 'scheduler' mode requires solo thread resume. */
resume_ptid = inferior_ptid;
/* Make sure we were stopped either at a breakpoint, or because
of a Ctrl-C. */
if (wait_status.kind != TARGET_WAITKIND_STOPPED
- || (wait_status.value.sig != TARGET_SIGNAL_TRAP &&
- wait_status.value.sig != TARGET_SIGNAL_INT))
+ || (wait_status.value.sig != TARGET_SIGNAL_TRAP
+ && wait_status.value.sig != TARGET_SIGNAL_INT))
{
return 0;
}
select_frame (get_current_frame ());
}
- /* We return 1 to indicate that there is a breakpoint here,
- so we need to step over it before continuing to avoid
- hitting it straight away. */
- if (breakpoint_here_p (wait_pc))
- return 1;
+ /* We return 1 to indicate that there is a breakpoint here,
+ so we need to step over it before continuing to avoid
+ hitting it straight away. */
+ if (breakpoint_here_p (wait_pc))
+ return 1;
}
return 0;
-
+
}
/* Record the pc of the program the last time it stopped. This is
if (addr == (CORE_ADDR) -1)
{
- /* If there is a breakpoint at the address we will resume at,
- step one instruction before inserting breakpoints
- so that we do not stop right away (and report a second
- hit at this breakpoint). */
-
if (read_pc () == stop_pc && breakpoint_here_p (read_pc ()))
+ /* There is a breakpoint at the address we will resume at,
+ step one instruction before inserting breakpoints so that
+ we do not stop right away (and report a second hit at this
+ breakpoint). */
oneproc = 1;
-
-#ifndef STEP_SKIPS_DELAY
-#define STEP_SKIPS_DELAY(pc) (0)
-#define STEP_SKIPS_DELAY_P (0)
-#endif
- /* Check breakpoint_here_p first, because breakpoint_here_p is fast
- (it just checks internal GDB data structures) and STEP_SKIPS_DELAY
- is slow (it needs to read memory from the target). */
- if (STEP_SKIPS_DELAY_P
- && breakpoint_here_p (read_pc () + 4)
- && STEP_SKIPS_DELAY (read_pc ()))
+ else if (gdbarch_single_step_through_delay_p (current_gdbarch)
+ && gdbarch_single_step_through_delay (current_gdbarch,
+ get_current_frame ()))
+ /* We stepped onto an instruction that needs to be stepped
+ again before re-inserting the breakpoint, do so. */
oneproc = 1;
}
else
write_pc (addr);
}
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: proceed (addr=0x%s, signal=%d, step=%d)\n",
+ paddr_nz (addr), siggnal, step);
+
/* In a multi-threaded task we may select another thread
and then continue or step.
if (prepare_to_proceed () && breakpoint_here_p (read_pc ()))
oneproc = 1;
-#ifdef HP_OS_BUG
- if (trap_expected_after_continue)
- {
- /* If (step == 0), a trap will be automatically generated after
- the first instruction is executed. Force step one
- instruction to clear this condition. This should not occur
- if step is nonzero, but it is harmless in that case. */
- oneproc = 1;
- trap_expected_after_continue = 0;
- }
-#endif /* HP_OS_BUG */
-
if (oneproc)
/* We will get a trace trap after one instruction.
Continue it automatically and insert breakpoints then. */
{
insert_breakpoints ();
/* If we get here there was no call to error() in
- insert breakpoints -- so they were inserted. */
+ insert breakpoints -- so they were inserted. */
breakpoints_inserted = 1;
}
cannot be read unless the inferior is stopped. At that point, we
are not guaranteed the inferior is stopped and so the read_pc ()
call can fail. Setting the prev_pc value here ensures the value is
- updated correctly when the inferior is stopped. */
+ updated correctly when the inferior is stopped. */
prev_pc = read_pc ();
/* Resume inferior. */
and in any case decode why it stopped, and act accordingly. */
/* Do this only if we are not using the event loop, or if the target
does not support asynchronous execution. */
- if (!event_loop_p || !target_can_async_p ())
+ if (!target_can_async_p ())
{
wait_for_inferior ();
normal_stop ();
/* These are meaningless until the first time through wait_for_inferior. */
prev_pc = 0;
-#ifdef HP_OS_BUG
- trap_expected_after_continue = 0;
-#endif
breakpoints_inserted = 0;
breakpoint_init_inferior (inf_starting);
/* The first resume is not following a fork/vfork/exec. */
pending_follow.kind = TARGET_WAITKIND_SPURIOUS; /* I.e., none. */
- /* See wait_for_inferior's handling of SYSCALL_ENTRY/RETURN events. */
- number_of_threads_in_syscalls = 0;
-
clear_proceed_status ();
stepping_past_singlestep_breakpoint = 0;
}
-
-static void
-delete_breakpoint_current_contents (void *arg)
-{
- struct breakpoint **breakpointp = (struct breakpoint **) arg;
- if (*breakpointp != NULL)
- {
- delete_breakpoint (*breakpointp);
- *breakpointp = NULL;
- }
-}
\f
/* This enum encodes possible reasons for doing a target_wait, so that
wfi can call target_wait in one place. (Ultimately the call will be
{
infwait_normal_state,
infwait_thread_hop_state,
- infwait_nullified_state,
infwait_nonstep_watch_state
};
CORE_ADDR stop_func_end;
char *stop_func_name;
struct symtab_and_line sal;
- int remove_breakpoints_on_following_step;
int current_line;
struct symtab *current_symtab;
int handling_longjmp; /* FIXME */
ptid_t ptid;
ptid_t saved_inferior_ptid;
- int update_step_sp;
+ int step_after_step_resume_breakpoint;
int stepping_through_solib_after_catch;
bpstat stepping_through_solib_catchpoints;
- int enable_hw_watchpoints_after_wait;
- int stepping_through_sigtramp;
int new_thread_event;
struct target_waitstatus tmpstatus;
enum infwait_states infwait_state;
void init_execution_control_state (struct execution_control_state *ecs);
-static void handle_step_into_function (struct execution_control_state *ecs);
void handle_inferior_event (struct execution_control_state *ecs);
-static void check_sigtramp2 (struct execution_control_state *ecs);
static void step_into_function (struct execution_control_state *ecs);
-static void step_over_function (struct execution_control_state *ecs);
+static void insert_step_resume_breakpoint_at_frame (struct frame_info *step_frame);
+static void insert_step_resume_breakpoint_at_sal (struct symtab_and_line sr_sal,
+ struct frame_id sr_id);
static void stop_stepping (struct execution_control_state *ecs);
static void prepare_to_wait (struct execution_control_state *ecs);
static void keep_going (struct execution_control_state *ecs);
struct execution_control_state ecss;
struct execution_control_state *ecs;
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: wait_for_inferior\n");
+
old_cleanups = make_cleanup (delete_step_resume_breakpoint,
&step_resume_breakpoint);
- make_cleanup (delete_breakpoint_current_contents,
- &through_sigtramp_breakpoint);
/* wfi still stays in a loop, so it's OK just to take the address of
a local to get the ecs pointer. */
while (1)
{
- if (target_wait_hook)
- ecs->ptid = target_wait_hook (ecs->waiton_ptid, ecs->wp);
+ if (deprecated_target_wait_hook)
+ ecs->ptid = deprecated_target_wait_hook (ecs->waiton_ptid, ecs->wp);
else
ecs->ptid = target_wait (ecs->waiton_ptid, ecs->wp);
{
old_cleanups = make_exec_cleanup (delete_step_resume_breakpoint,
&step_resume_breakpoint);
- make_exec_cleanup (delete_breakpoint_current_contents,
- &through_sigtramp_breakpoint);
/* Fill in with reasonable starting values. */
init_execution_control_state (async_ecs);
registers_changed ();
}
- if (target_wait_hook)
+ if (deprecated_target_wait_hook)
async_ecs->ptid =
- target_wait_hook (async_ecs->waiton_ptid, async_ecs->wp);
+ deprecated_target_wait_hook (async_ecs->waiton_ptid, async_ecs->wp);
else
async_ecs->ptid = target_wait (async_ecs->waiton_ptid, async_ecs->wp);
{
/* ecs->another_trap? */
ecs->random_signal = 0;
- ecs->remove_breakpoints_on_following_step = 0;
+ ecs->step_after_step_resume_breakpoint = 0;
ecs->handling_longjmp = 0; /* FIXME */
- ecs->update_step_sp = 0;
ecs->stepping_through_solib_after_catch = 0;
ecs->stepping_through_solib_catchpoints = NULL;
- ecs->enable_hw_watchpoints_after_wait = 0;
- ecs->stepping_through_sigtramp = 0;
ecs->sal = find_pc_line (prev_pc, 0);
ecs->current_line = ecs->sal.line;
ecs->current_symtab = ecs->sal.symtab;
ecs->wp = &(ecs->ws);
}
-/* Call this function before setting step_resume_breakpoint, as a
- sanity check. There should never be more than one step-resume
- breakpoint per thread, so we should never be setting a new
- step_resume_breakpoint when one is already active. */
-static void
-check_for_old_step_resume_breakpoint (void)
-{
- if (step_resume_breakpoint)
- warning
- ("GDB bug: infrun.c (wait_for_inferior): dropping old step_resume breakpoint");
-}
-
/* Return the cached copy of the last pid/waitstatus returned by
- target_wait()/target_wait_hook(). The data is actually cached by
- handle_inferior_event(), which gets called immediately after
- target_wait()/target_wait_hook(). */
+ target_wait()/deprecated_target_wait_hook(). The data is actually
+ cached by handle_inferior_event(), which gets called immediately
+ after target_wait()/deprecated_target_wait_hook(). */
void
get_last_target_status (ptid_t *ptidp, struct target_waitstatus *status)
/* Save infrun state for the old thread. */
save_infrun_state (inferior_ptid, prev_pc,
trap_expected, step_resume_breakpoint,
- through_sigtramp_breakpoint, step_range_start,
+ step_range_start,
step_range_end, &step_frame_id,
ecs->handling_longjmp, ecs->another_trap,
ecs->stepping_through_solib_after_catch,
ecs->stepping_through_solib_catchpoints,
- ecs->stepping_through_sigtramp,
- ecs->current_line, ecs->current_symtab, step_sp);
+ ecs->current_line, ecs->current_symtab);
/* Load infrun state for the new thread. */
load_infrun_state (ecs->ptid, &prev_pc,
&trap_expected, &step_resume_breakpoint,
- &through_sigtramp_breakpoint, &step_range_start,
+ &step_range_start,
&step_range_end, &step_frame_id,
&ecs->handling_longjmp, &ecs->another_trap,
&ecs->stepping_through_solib_after_catch,
&ecs->stepping_through_solib_catchpoints,
- &ecs->stepping_through_sigtramp,
- &ecs->current_line, &ecs->current_symtab, &step_sp);
+ &ecs->current_line, &ecs->current_symtab);
}
inferior_ptid = ecs->ptid;
}
-/* Wrapper for DEPRECATED_PC_IN_SIGTRAMP that takes care of the need
- to find the function's name.
-
- In a classic example of "left hand VS right hand", "infrun.c" was
- trying to improve GDB's performance by caching the result of calls
- to calls to find_pc_partial_funtion, while at the same time
- find_pc_partial_function was also trying to ramp up performance by
- caching its most recent return value. The below makes the the
- function find_pc_partial_function solely responsibile for
- performance issues (the local cache that relied on a global
- variable - arrrggg - deleted).
-
- Using the testsuite and gcov, it was found that dropping the local
- "infrun.c" cache and instead relying on find_pc_partial_function
- increased the number of calls to 12000 (from 10000), but the number
- of times find_pc_partial_function's cache missed (this is what
- matters) was only increased by only 4 (to 3569). (A quick back of
- envelope caculation suggests that the extra 2000 function calls
- @1000 extra instructions per call make the 1 MIP VAX testsuite run
- take two extra seconds, oops :-)
-
- Long term, this function can be eliminated, replaced by the code:
- get_frame_type(current_frame()) == SIGTRAMP_FRAME (for new
- architectures this is very cheap). */
-
-static int
-pc_in_sigtramp (CORE_ADDR pc)
-{
- char *name;
- find_pc_partial_function (pc, &name, NULL, NULL);
- return DEPRECATED_PC_IN_SIGTRAMP (pc, name);
-}
-
-/* Handle the inferior event in the cases when we just stepped
- into a function. */
-
-static void
-handle_step_into_function (struct execution_control_state *ecs)
-{
- CORE_ADDR real_stop_pc;
-
- if ((step_over_calls == STEP_OVER_NONE)
- || ((step_range_end == 1)
- && in_prologue (prev_pc, ecs->stop_func_start)))
- {
- /* I presume that step_over_calls is only 0 when we're
- supposed to be stepping at the assembly language level
- ("stepi"). Just stop. */
- /* Also, maybe we just did a "nexti" inside a prolog,
- so we thought it was a subroutine call but it was not.
- Stop as well. FENN */
- stop_step = 1;
- print_stop_reason (END_STEPPING_RANGE, 0);
- stop_stepping (ecs);
- return;
- }
-
- if (step_over_calls == STEP_OVER_ALL || IGNORE_HELPER_CALL (stop_pc))
- {
- /* We're doing a "next". */
-
- if (legacy_frame_p (current_gdbarch)
- && pc_in_sigtramp (stop_pc)
- && frame_id_inner (step_frame_id,
- frame_id_build (read_sp (), 0)))
- /* NOTE: cagney/2004-03-15: This is only needed for legacy
- systems. On non-legacy systems step_over_function doesn't
- use STEP_FRAME_ID and hence the below update "hack" isn't
- needed. */
- /* We stepped out of a signal handler, and into its calling
- trampoline. This is misdetected as a subroutine call, but
- stepping over the signal trampoline isn't such a bad idea.
- In order to do that, we have to ignore the value in
- step_frame_id, since that doesn't represent the frame
- that'll reach when we return from the signal trampoline.
- Otherwise we'll probably continue to the end of the
- program. */
- step_frame_id = null_frame_id;
-
- step_over_function (ecs);
- keep_going (ecs);
- return;
- }
-
- /* If we are in a function call trampoline (a stub between
- the calling routine and the real function), locate the real
- function. That's what tells us (a) whether we want to step
- into it at all, and (b) what prologue we want to run to
- the end of, if we do step into it. */
- real_stop_pc = skip_language_trampoline (stop_pc);
- if (real_stop_pc == 0)
- real_stop_pc = SKIP_TRAMPOLINE_CODE (stop_pc);
- if (real_stop_pc != 0)
- ecs->stop_func_start = real_stop_pc;
-
- /* If we have line number information for the function we
- are thinking of stepping into, step into it.
-
- If there are several symtabs at that PC (e.g. with include
- files), just want to know whether *any* of them have line
- numbers. find_pc_line handles this. */
- {
- struct symtab_and_line tmp_sal;
-
- tmp_sal = find_pc_line (ecs->stop_func_start, 0);
- if (tmp_sal.line != 0)
- {
- step_into_function (ecs);
- return;
- }
- }
-
- /* If we have no line number and the step-stop-if-no-debug
- is set, we stop the step so that the user has a chance to
- switch in assembly mode. */
- if (step_over_calls == STEP_OVER_UNDEBUGGABLE && step_stop_if_no_debug)
- {
- stop_step = 1;
- print_stop_reason (END_STEPPING_RANGE, 0);
- stop_stepping (ecs);
- return;
- }
-
- step_over_function (ecs);
- keep_going (ecs);
- return;
-}
-
static void
adjust_pc_after_break (struct execution_control_state *ecs)
{
- CORE_ADDR stop_pc;
+ CORE_ADDR breakpoint_pc;
/* If this target does not decrement the PC after breakpoints, then
we have nothing to do. */
affected by DECR_PC_AFTER_BREAK. Other waitkinds which are implemented
by software breakpoints should be handled through the normal breakpoint
layer.
-
+
NOTE drow/2004-01-31: On some targets, breakpoints may generate
different signals (SIGILL or SIGEMT for instance), but it is less
clear where the PC is pointing afterwards. It may not match
DECR_PC_AFTER_BREAK. I don't know any specific target that generates
these signals at breakpoints (the code has been in GDB since at least
1992) so I can not guess how to handle them here.
-
+
In earlier versions of GDB, a target with HAVE_NONSTEPPABLE_WATCHPOINTS
would have the PC after hitting a watchpoint affected by
DECR_PC_AFTER_BREAK. I haven't found any target with both of these set
if (ecs->ws.value.sig != TARGET_SIGNAL_TRAP)
return;
- /* Find the location where (if we've hit a breakpoint) the breakpoint would
- be. */
- stop_pc = read_pc_pid (ecs->ptid) - DECR_PC_AFTER_BREAK;
-
- /* If we're software-single-stepping, then assume this is a breakpoint.
- NOTE drow/2004-01-17: This doesn't check that the PC matches, or that
- we're even in the right thread. The software-single-step code needs
- some modernization.
-
- If we're not software-single-stepping, then we first check that there
- is an enabled software breakpoint at this address. If there is, and
- we weren't using hardware-single-step, then we've hit the breakpoint.
-
- If we were using hardware-single-step, we check prev_pc; if we just
- stepped over an inserted software breakpoint, then we should decrement
- the PC and eventually report hitting the breakpoint. The prev_pc check
- prevents us from decrementing the PC if we just stepped over a jump
- instruction and landed on the instruction after a breakpoint.
-
- The last bit checks that we didn't hit a breakpoint in a signal handler
- without an intervening stop in sigtramp, which is detected by a new
- stack pointer value below any usual function calling stack adjustments.
-
- NOTE drow/2004-01-17: I'm not sure that this is necessary. The check
- predates checking for software single step at the same time. Also,
- if we've moved into a signal handler we should have seen the
- signal. */
-
- if ((SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
- || (software_breakpoint_inserted_here_p (stop_pc)
- && !(currently_stepping (ecs)
- && prev_pc != stop_pc
- && !(step_range_end && INNER_THAN (read_sp (), (step_sp - 16))))))
- write_pc_pid (stop_pc, ecs->ptid);
+ /* Find the location where (if we've hit a breakpoint) the
+ breakpoint would be. */
+ breakpoint_pc = read_pc_pid (ecs->ptid) - DECR_PC_AFTER_BREAK;
+
+ if (SOFTWARE_SINGLE_STEP_P ())
+ {
+ /* When using software single-step, a SIGTRAP can only indicate
+ an inserted breakpoint. This actually makes things
+ easier. */
+ if (singlestep_breakpoints_inserted_p)
+ /* When software single stepping, the instruction at [prev_pc]
+ is never a breakpoint, but the instruction following
+ [prev_pc] (in program execution order) always is. Assume
+ that following instruction was reached and hence a software
+ breakpoint was hit. */
+ write_pc_pid (breakpoint_pc, ecs->ptid);
+ else if (software_breakpoint_inserted_here_p (breakpoint_pc))
+ /* The inferior was free running (i.e., no single-step
+ breakpoints inserted) and it hit a software breakpoint. */
+ write_pc_pid (breakpoint_pc, ecs->ptid);
+ }
+ else
+ {
+ /* When using hardware single-step, a SIGTRAP is reported for
+ both a completed single-step and a software breakpoint. Need
+ to differentiate between the two as the latter needs
+ adjusting but the former does not. */
+ if (currently_stepping (ecs))
+ {
+ if (prev_pc == breakpoint_pc
+ && software_breakpoint_inserted_here_p (breakpoint_pc))
+ /* Hardware single-stepped a software breakpoint (as
+ occures when the inferior is resumed with PC pointing
+ at not-yet-hit software breakpoint). Since the
+ breakpoint really is executed, the inferior needs to be
+ backed up to the breakpoint address. */
+ write_pc_pid (breakpoint_pc, ecs->ptid);
+ }
+ else
+ {
+ if (software_breakpoint_inserted_here_p (breakpoint_pc))
+ /* The inferior was free running (i.e., no hardware
+ single-step and no possibility of a false SIGTRAP) and
+ hit a software breakpoint. */
+ write_pc_pid (breakpoint_pc, ecs->ptid);
+ }
+ }
}
/* Given an execution control state that has been freshly filled in
by an event from the inferior, figure out what it means and take
appropriate action. */
+int stepped_after_stopped_by_watchpoint;
+
void
handle_inferior_event (struct execution_control_state *ecs)
{
isn't used, then you're wrong! The macro STOPPED_BY_WATCHPOINT,
defined in the file "config/pa/nm-hppah.h", accesses the variable
indirectly. Mutter something rude about the HP merge. */
- int stepped_after_stopped_by_watchpoint;
int sw_single_step_trap_p = 0;
+ int stopped_by_watchpoint = -1; /* Mark as unknown. */
/* Cache the last pid/waitstatus. */
target_last_wait_ptid = ecs->ptid;
switch (ecs->infwait_state)
{
case infwait_thread_hop_state:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: infwait_thread_hop_state\n");
/* Cancel the waiton_ptid. */
ecs->waiton_ptid = pid_to_ptid (-1);
- /* See comments where a TARGET_WAITKIND_SYSCALL_RETURN event
- is serviced in this loop, below. */
- if (ecs->enable_hw_watchpoints_after_wait)
- {
- TARGET_ENABLE_HW_WATCHPOINTS (PIDGET (inferior_ptid));
- ecs->enable_hw_watchpoints_after_wait = 0;
- }
- stepped_after_stopped_by_watchpoint = 0;
break;
case infwait_normal_state:
- /* See comments where a TARGET_WAITKIND_SYSCALL_RETURN event
- is serviced in this loop, below. */
- if (ecs->enable_hw_watchpoints_after_wait)
- {
- TARGET_ENABLE_HW_WATCHPOINTS (PIDGET (inferior_ptid));
- ecs->enable_hw_watchpoints_after_wait = 0;
- }
- stepped_after_stopped_by_watchpoint = 0;
- break;
-
- case infwait_nullified_state:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: infwait_normal_state\n");
stepped_after_stopped_by_watchpoint = 0;
break;
case infwait_nonstep_watch_state:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: infwait_nonstep_watch_state\n");
insert_breakpoints ();
/* FIXME-maybe: is this cleaner than setting a flag? Does it
/* If it's a new process, add it to the thread database */
ecs->new_thread_event = (!ptid_equal (ecs->ptid, inferior_ptid)
+ && !ptid_equal (ecs->ptid, minus_one_ptid)
&& !in_thread_list (ecs->ptid));
if (ecs->ws.kind != TARGET_WAITKIND_EXITED
ui_out_text (uiout, "[New ");
ui_out_text (uiout, target_pid_or_tid_to_str (ecs->ptid));
ui_out_text (uiout, "]\n");
-
-#if 0
- /* NOTE: This block is ONLY meant to be invoked in case of a
- "thread creation event"! If it is invoked for any other
- sort of event (such as a new thread landing on a breakpoint),
- the event will be discarded, which is almost certainly
- a bad thing!
-
- To avoid this, the low-level module (eg. target_wait)
- should call in_thread_list and add_thread, so that the
- new thread is known by the time we get here. */
-
- /* We may want to consider not doing a resume here in order
- to give the user a chance to play with the new thread.
- It might be good to make that a user-settable option. */
-
- /* At this point, all threads are stopped (happens
- automatically in either the OS or the native code).
- Therefore we need to continue all threads in order to
- make progress. */
-
- target_resume (RESUME_ALL, 0, TARGET_SIGNAL_0);
- prepare_to_wait (ecs);
- return;
-#endif
}
switch (ecs->ws.kind)
{
case TARGET_WAITKIND_LOADED:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_LOADED\n");
/* Ignore gracefully during startup of the inferior, as it
might be the shell which has just loaded some objects,
otherwise add the symbols for the newly loaded objects. */
breakpoint_re_set. */
target_terminal_ours_for_output ();
/* NOTE: cagney/2003-11-25: Make certain that the target
- stack's section table is kept up-to-date. Architectures,
- (e.g., PPC64), use the section table to perform
- operations such as address => section name and hence
- require the table to contain all sections (including
- those found in shared libraries). */
+ stack's section table is kept up-to-date. Architectures,
+ (e.g., PPC64), use the section table to perform
+ operations such as address => section name and hence
+ require the table to contain all sections (including
+ those found in shared libraries). */
/* NOTE: cagney/2003-11-25: Pass current_target and not
- exec_ops to SOLIB_ADD. This is because current GDB is
- only tooled to propagate section_table changes out from
- the "current_target" (see target_resize_to_sections), and
- not up from the exec stratum. This, of course, isn't
- right. "infrun.c" should only interact with the
- exec/process stratum, instead relying on the target stack
- to propagate relevant changes (stop, section table
- changed, ...) up to other layers. */
+ exec_ops to SOLIB_ADD. This is because current GDB is
+ only tooled to propagate section_table changes out from
+ the "current_target" (see target_resize_to_sections), and
+ not up from the exec stratum. This, of course, isn't
+ right. "infrun.c" should only interact with the
+ exec/process stratum, instead relying on the target stack
+ to propagate relevant changes (stop, section table
+ changed, ...) up to other layers. */
SOLIB_ADD (NULL, 0, ¤t_target, auto_solib_add);
target_terminal_inferior ();
return;
case TARGET_WAITKIND_SPURIOUS:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SPURIOUS\n");
resume (0, TARGET_SIGNAL_0);
prepare_to_wait (ecs);
return;
case TARGET_WAITKIND_EXITED:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_EXITED\n");
target_terminal_ours (); /* Must do this before mourn anyway */
print_stop_reason (EXITED, ecs->ws.value.integer);
return;
case TARGET_WAITKIND_SIGNALLED:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SIGNALLED\n");
stop_print_frame = 0;
stop_signal = ecs->ws.value.sig;
target_terminal_ours (); /* Must do this before mourn anyway */
the above cases end in a continue or goto. */
case TARGET_WAITKIND_FORKED:
case TARGET_WAITKIND_VFORKED:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_FORKED\n");
stop_signal = TARGET_SIGNAL_TRAP;
pending_follow.kind = ecs->ws.kind;
stop_pc = read_pc ();
- stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid);
+ stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid, 0);
ecs->random_signal = !bpstat_explains_signal (stop_bpstat);
goto process_event_stop_test;
case TARGET_WAITKIND_EXECD:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_EXECED\n");
stop_signal = TARGET_SIGNAL_TRAP;
/* NOTE drow/2002-12-05: This code should be pushed down into the
- target_wait function. Until then following vfork on HP/UX 10.20
- is probably broken by this. Of course, it's broken anyway. */
+ target_wait function. Until then following vfork on HP/UX 10.20
+ is probably broken by this. Of course, it's broken anyway. */
/* Is this a target which reports multiple exec events per actual
call to exec()? (HP-UX using ptrace does, for example.) If so,
ignore all but the last one. Just resume the exec'r, and wait
ecs->saved_inferior_ptid = inferior_ptid;
inferior_ptid = ecs->ptid;
- stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid);
+ stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid, 0);
ecs->random_signal = !bpstat_explains_signal (stop_bpstat);
inferior_ptid = ecs->saved_inferior_ptid;
}
goto process_event_stop_test;
- /* These syscall events are returned on HP-UX, as part of its
- implementation of page-protection-based "hardware" watchpoints.
- HP-UX has unfortunate interactions between page-protections and
- some system calls. Our solution is to disable hardware watches
- when a system call is entered, and reenable them when the syscall
- completes. The downside of this is that we may miss the precise
- point at which a watched piece of memory is modified. "Oh well."
-
- Note that we may have multiple threads running, which may each
- enter syscalls at roughly the same time. Since we don't have a
- good notion currently of whether a watched piece of memory is
- thread-private, we'd best not have any page-protections active
- when any thread is in a syscall. Thus, we only want to reenable
- hardware watches when no threads are in a syscall.
-
- Also, be careful not to try to gather much state about a thread
- that's in a syscall. It's frequently a losing proposition. */
+ /* Be careful not to try to gather much state about a thread
+ that's in a syscall. It's frequently a losing proposition. */
case TARGET_WAITKIND_SYSCALL_ENTRY:
- number_of_threads_in_syscalls++;
- if (number_of_threads_in_syscalls == 1)
- {
- TARGET_DISABLE_HW_WATCHPOINTS (PIDGET (inferior_ptid));
- }
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SYSCALL_ENTRY\n");
resume (0, TARGET_SIGNAL_0);
prepare_to_wait (ecs);
return;
get it entirely out of the syscall. (We get notice of the
event when the thread is just on the verge of exiting a
syscall. Stepping one instruction seems to get it back
- into user code.)
-
- Note that although the logical place to reenable h/w watches
- is here, we cannot. We cannot reenable them before stepping
- the thread (this causes the next wait on the thread to hang).
-
- Nor can we enable them after stepping until we've done a wait.
- Thus, we simply set the flag ecs->enable_hw_watchpoints_after_wait
- here, which will be serviced immediately after the target
- is waited on. */
+ into user code.) */
case TARGET_WAITKIND_SYSCALL_RETURN:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SYSCALL_RETURN\n");
target_resume (ecs->ptid, 1, TARGET_SIGNAL_0);
-
- if (number_of_threads_in_syscalls > 0)
- {
- number_of_threads_in_syscalls--;
- ecs->enable_hw_watchpoints_after_wait =
- (number_of_threads_in_syscalls == 0);
- }
prepare_to_wait (ecs);
return;
case TARGET_WAITKIND_STOPPED:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_STOPPED\n");
stop_signal = ecs->ws.value.sig;
break;
/* We had an event in the inferior, but we are not interested
in handling it at this level. The lower layers have already
done what needs to be done, if anything.
-
- One of the possible circumstances for this is when the
- inferior produces output for the console. The inferior has
- not stopped, and we are ignoring the event. Another possible
- circumstance is any event which the lower level knows will be
- reported multiple times without an intervening resume. */
+
+ One of the possible circumstances for this is when the
+ inferior produces output for the console. The inferior has
+ not stopped, and we are ignoring the event. Another possible
+ circumstance is any event which the lower level knows will be
+ reported multiple times without an intervening resume. */
case TARGET_WAITKIND_IGNORE:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_IGNORE\n");
prepare_to_wait (ecs);
return;
}
stop_pc = read_pc_pid (ecs->ptid);
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stop_pc = 0x%s\n", paddr_nz (stop_pc));
+
if (stepping_past_singlestep_breakpoint)
{
- gdb_assert (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p);
+ gdb_assert (SOFTWARE_SINGLE_STEP_P ()
+ && singlestep_breakpoints_inserted_p);
gdb_assert (ptid_equal (singlestep_ptid, ecs->ptid));
gdb_assert (!ptid_equal (singlestep_ptid, saved_singlestep_ptid));
stepping_past_singlestep_breakpoint = 0;
/* We've either finished single-stepping past the single-step
- breakpoint, or stopped for some other reason. It would be nice if
- we could tell, but we can't reliably. */
+ breakpoint, or stopped for some other reason. It would be nice if
+ we could tell, but we can't reliably. */
if (stop_signal == TARGET_SIGNAL_TRAP)
- {
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepping_past_singlestep_breakpoint\n");
/* Pull the single step breakpoints out of the target. */
SOFTWARE_SINGLE_STEP (0, 0);
singlestep_breakpoints_inserted_p = 0;
ecs->ptid = saved_singlestep_ptid;
context_switch (ecs);
- if (context_hook)
- context_hook (pid_to_thread_id (ecs->ptid));
+ if (deprecated_context_hook)
+ deprecated_context_hook (pid_to_thread_id (ecs->ptid));
resume (1, TARGET_SIGNAL_0);
prepare_to_wait (ecs);
}
if (thread_hop_needed)
- {
- int remove_status;
+ {
+ int remove_status;
- /* Saw a breakpoint, but it was hit by the wrong thread.
- Just continue. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: thread_hop_needed\n");
- if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
- {
- /* Pull the single step breakpoints out of the target. */
- SOFTWARE_SINGLE_STEP (0, 0);
- singlestep_breakpoints_inserted_p = 0;
- }
+ /* Saw a breakpoint, but it was hit by the wrong thread.
+ Just continue. */
- remove_status = remove_breakpoints ();
- /* Did we fail to remove breakpoints? If so, try
- to set the PC past the bp. (There's at least
- one situation in which we can fail to remove
- the bp's: On HP-UX's that use ttrace, we can't
- change the address space of a vforking child
- process until the child exits (well, okay, not
- then either :-) or execs. */
- if (remove_status != 0)
- {
- /* FIXME! This is obviously non-portable! */
- write_pc_pid (stop_pc + 4, ecs->ptid);
- /* We need to restart all the threads now,
- * unles we're running in scheduler-locked mode.
- * Use currently_stepping to determine whether to
- * step or continue.
- */
- /* FIXME MVS: is there any reason not to call resume()? */
- if (scheduler_mode == schedlock_on)
- target_resume (ecs->ptid,
- currently_stepping (ecs), TARGET_SIGNAL_0);
- else
- target_resume (RESUME_ALL,
- currently_stepping (ecs), TARGET_SIGNAL_0);
- prepare_to_wait (ecs);
- return;
- }
+ if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
+ {
+ /* Pull the single step breakpoints out of the target. */
+ SOFTWARE_SINGLE_STEP (0, 0);
+ singlestep_breakpoints_inserted_p = 0;
+ }
+
+ remove_status = remove_breakpoints ();
+ /* Did we fail to remove breakpoints? If so, try
+ to set the PC past the bp. (There's at least
+ one situation in which we can fail to remove
+ the bp's: On HP-UX's that use ttrace, we can't
+ change the address space of a vforking child
+ process until the child exits (well, okay, not
+ then either :-) or execs. */
+ if (remove_status != 0)
+ {
+ /* FIXME! This is obviously non-portable! */
+ write_pc_pid (stop_pc + 4, ecs->ptid);
+ /* We need to restart all the threads now,
+ * unles we're running in scheduler-locked mode.
+ * Use currently_stepping to determine whether to
+ * step or continue.
+ */
+ /* FIXME MVS: is there any reason not to call resume()? */
+ if (scheduler_mode == schedlock_on)
+ target_resume (ecs->ptid,
+ currently_stepping (ecs), TARGET_SIGNAL_0);
else
- { /* Single step */
- breakpoints_inserted = 0;
- if (!ptid_equal (inferior_ptid, ecs->ptid))
- context_switch (ecs);
- ecs->waiton_ptid = ecs->ptid;
- ecs->wp = &(ecs->ws);
- ecs->another_trap = 1;
-
- ecs->infwait_state = infwait_thread_hop_state;
- keep_going (ecs);
- registers_changed ();
- return;
- }
+ target_resume (RESUME_ALL,
+ currently_stepping (ecs), TARGET_SIGNAL_0);
+ prepare_to_wait (ecs);
+ return;
+ }
+ else
+ { /* Single step */
+ breakpoints_inserted = 0;
+ if (!ptid_equal (inferior_ptid, ecs->ptid))
+ context_switch (ecs);
+ ecs->waiton_ptid = ecs->ptid;
+ ecs->wp = &(ecs->ws);
+ ecs->another_trap = 1;
+
+ ecs->infwait_state = infwait_thread_hop_state;
+ keep_going (ecs);
+ registers_changed ();
+ return;
+ }
}
else if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
- {
- sw_single_step_trap_p = 1;
- ecs->random_signal = 0;
- }
+ {
+ sw_single_step_trap_p = 1;
+ ecs->random_signal = 0;
+ }
}
else
ecs->random_signal = 1;
so, then switch to that thread. */
if (!ptid_equal (ecs->ptid, inferior_ptid))
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: context switch\n");
+
context_switch (ecs);
- if (context_hook)
- context_hook (pid_to_thread_id (ecs->ptid));
+ if (deprecated_context_hook)
+ deprecated_context_hook (pid_to_thread_id (ecs->ptid));
flush_cached_frames ();
}
singlestep_breakpoints_inserted_p = 0;
}
- /* If PC is pointing at a nullified instruction, then step beyond
- it so that the user won't be confused when GDB appears to be ready
- to execute it. */
-
- /* if (INSTRUCTION_NULLIFIED && currently_stepping (ecs)) */
- if (INSTRUCTION_NULLIFIED)
- {
- registers_changed ();
- target_resume (ecs->ptid, 1, TARGET_SIGNAL_0);
-
- /* We may have received a signal that we want to pass to
- the inferior; therefore, we must not clobber the waitstatus
- in WS. */
-
- ecs->infwait_state = infwait_nullified_state;
- ecs->waiton_ptid = ecs->ptid;
- ecs->wp = &(ecs->tmpstatus);
- prepare_to_wait (ecs);
- return;
- }
-
/* It may not be necessary to disable the watchpoint to stop over
it. For example, the PA can (with some kernel cooperation)
single step over a watchpoint without disabling the watchpoint. */
if (HAVE_STEPPABLE_WATCHPOINT && STOPPED_BY_WATCHPOINT (ecs->ws))
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: STOPPED_BY_WATCHPOINT\n");
resume (1, 0);
prepare_to_wait (ecs);
return;
includes evaluating watchpoints, things will come to a
stop in the correct manner. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: STOPPED_BY_WATCHPOINT\n");
remove_breakpoints ();
registers_changed ();
target_resume (ecs->ptid, 1, TARGET_SIGNAL_0); /* Single step */
/* It may be possible to simply continue after a watchpoint. */
if (HAVE_CONTINUABLE_WATCHPOINT)
- STOPPED_BY_WATCHPOINT (ecs->ws);
+ stopped_by_watchpoint = STOPPED_BY_WATCHPOINT (ecs->ws);
ecs->stop_func_start = 0;
ecs->stop_func_end = 0;
will both be 0 if it doesn't work. */
find_pc_partial_function (stop_pc, &ecs->stop_func_name,
&ecs->stop_func_start, &ecs->stop_func_end);
- ecs->stop_func_start += FUNCTION_START_OFFSET;
+ ecs->stop_func_start += DEPRECATED_FUNCTION_START_OFFSET;
ecs->another_trap = 0;
bpstat_clear (&stop_bpstat);
stop_step = 0;
stopped_by_random_signal = 0;
breakpoints_failed = 0;
+ if (stop_signal == TARGET_SIGNAL_TRAP
+ && trap_expected
+ && gdbarch_single_step_through_delay_p (current_gdbarch)
+ && currently_stepping (ecs))
+ {
+ /* We're trying to step of a breakpoint. Turns out that we're
+ also on an instruction that needs to be stepped multiple
+ times before it's been fully executing. E.g., architectures
+ with a delay slot. It needs to be stepped twice, once for
+ the instruction and once for the delay slot. */
+ int step_through_delay
+ = gdbarch_single_step_through_delay (current_gdbarch,
+ get_current_frame ());
+ if (debug_infrun && step_through_delay)
+ fprintf_unfiltered (gdb_stdlog, "infrun: step through delay\n");
+ if (step_range_end == 0 && step_through_delay)
+ {
+ /* The user issued a continue when stopped at a breakpoint.
+ Set up for another trap and get out of here. */
+ ecs->another_trap = 1;
+ keep_going (ecs);
+ return;
+ }
+ else if (step_through_delay)
+ {
+ /* The user issued a step when stopped at a breakpoint.
+ Maybe we should stop, maybe we should not - the delay
+ slot *might* correspond to a line of source. In any
+ case, don't decide that here, just set ecs->another_trap,
+ making sure we single-step again before breakpoints are
+ re-inserted. */
+ ecs->another_trap = 1;
+ }
+ }
+
/* Look at the cause of the stop, and decide what to do.
The alternatives are:
1) break; to really stop and return to the debugger,
stack. */
if (stop_signal == TARGET_SIGNAL_TRAP
- || (breakpoints_inserted &&
- (stop_signal == TARGET_SIGNAL_ILL
- || stop_signal == TARGET_SIGNAL_SEGV
- || stop_signal == TARGET_SIGNAL_EMT))
- || stop_soon == STOP_QUIETLY
- || stop_soon == STOP_QUIETLY_NO_SIGSTOP)
+ || (breakpoints_inserted
+ && (stop_signal == TARGET_SIGNAL_ILL
+ || stop_signal == TARGET_SIGNAL_SEGV
+ || stop_signal == TARGET_SIGNAL_EMT))
+ || stop_soon == STOP_QUIETLY || stop_soon == STOP_QUIETLY_NO_SIGSTOP)
{
if (stop_signal == TARGET_SIGNAL_TRAP && stop_after_trap)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stopped\n");
stop_print_frame = 0;
stop_stepping (ecs);
return;
shared libraries hook functions. */
if (stop_soon == STOP_QUIETLY)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: quietly stopped\n");
stop_stepping (ecs);
return;
}
return;
}
- /* Don't even think about breakpoints
- if just proceeded over a breakpoint.
-
- However, if we are trying to proceed over a breakpoint
- and end up in sigtramp, then through_sigtramp_breakpoint
- will be set and we should check whether we've hit the
- step breakpoint. */
- if (stop_signal == TARGET_SIGNAL_TRAP && trap_expected
- && through_sigtramp_breakpoint == NULL)
- bpstat_clear (&stop_bpstat);
+ /* Don't even think about breakpoints if just proceeded over a
+ breakpoint. */
+ if (stop_signal == TARGET_SIGNAL_TRAP && trap_expected)
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: trap expected\n");
+ bpstat_clear (&stop_bpstat);
+ }
else
{
/* See if there is a breakpoint at the current PC. */
- stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid);
+ stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid,
+ stopped_by_watchpoint);
/* Following in case break condition called a
function. */
}
/* NOTE: cagney/2003-03-29: These two checks for a random signal
- at one stage in the past included checks for an inferior
- function call's call dummy's return breakpoint. The original
- comment, that went with the test, read:
+ at one stage in the past included checks for an inferior
+ function call's call dummy's return breakpoint. The original
+ comment, that went with the test, read:
- ``End of a stack dummy. Some systems (e.g. Sony news) give
- another signal besides SIGTRAP, so check here as well as
- above.''
+ ``End of a stack dummy. Some systems (e.g. Sony news) give
+ another signal besides SIGTRAP, so check here as well as
+ above.''
If someone ever tries to get get call dummys on a
non-executable stack to work (where the target would stop
enabled when momentary breakpoints were not being used, I
suspect that it won't be the case.
- NOTE: kettenis/2004-02-05: Indeed such checks don't seem to
- be necessary for call dummies on a non-executable stack on
- SPARC. */
+ NOTE: kettenis/2004-02-05: Indeed such checks don't seem to
+ be necessary for call dummies on a non-executable stack on
+ SPARC. */
if (stop_signal == TARGET_SIGNAL_TRAP)
ecs->random_signal
/* Signal not for debugging purposes. */
int printed = 0;
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: random signal %d\n", stop_signal);
+
stopped_by_random_signal = 1;
if (signal_print[stop_signal])
if (signal_program[stop_signal] == 0)
stop_signal = TARGET_SIGNAL_0;
- /* I'm not sure whether this needs to be check_sigtramp2 or
- whether it could/should be keep_going.
-
- This used to jump to step_over_function if we are stepping,
- which is wrong.
-
- Suppose the user does a `next' over a function call, and while
- that call is in progress, the inferior receives a signal for
- which GDB does not stop (i.e., signal_stop[SIG] is false). In
- that case, when we reach this point, there is already a
- step-resume breakpoint established, right where it should be:
- immediately after the function call the user is "next"-ing
- over. If we call step_over_function now, two bad things
- happen:
-
- - we'll create a new breakpoint, at wherever the current
- frame's return address happens to be. That could be
- anywhere, depending on what function call happens to be on
- the top of the stack at that point. Point is, it's probably
- not where we need it.
-
- - the existing step-resume breakpoint (which is at the correct
- address) will get orphaned: step_resume_breakpoint will point
- to the new breakpoint, and the old step-resume breakpoint
- will never be cleaned up.
-
- The old behavior was meant to help HP-UX single-step out of
- sigtramps. It would place the new breakpoint at prev_pc, which
- was certainly wrong. I don't know the details there, so fixing
- this probably breaks that. As with anything else, it's up to
- the HP-UX maintainer to furnish a fix that doesn't break other
- platforms. --JimB, 20 May 1999 */
- check_sigtramp2 (ecs);
+ if (prev_pc == read_pc ()
+ && !breakpoints_inserted
+ && breakpoint_here_p (read_pc ())
+ && step_resume_breakpoint == NULL)
+ {
+ /* We were just starting a new sequence, attempting to
+ single-step off of a breakpoint and expecting a SIGTRAP.
+ Intead this signal arrives. This signal will take us out
+ of the stepping range so GDB needs to remember to, when
+ the signal handler returns, resume stepping off that
+ breakpoint. */
+ /* To simplify things, "continue" is forced to use the same
+ code paths as single-step - set a breakpoint at the
+ signal return address and then, once hit, step off that
+ breakpoint. */
+ insert_step_resume_breakpoint_at_frame (get_current_frame ());
+ ecs->step_after_step_resume_breakpoint = 1;
+ }
+ else if (step_range_end != 0
+ && stop_signal != TARGET_SIGNAL_0
+ && stop_pc >= step_range_start && stop_pc < step_range_end
+ && frame_id_eq (get_frame_id (get_current_frame ()),
+ step_frame_id))
+ {
+ /* The inferior is about to take a signal that will take it
+ out of the single step range. Set a breakpoint at the
+ current PC (which is presumably where the signal handler
+ will eventually return) and then allow the inferior to
+ run free.
+
+ Note that this is only needed for a signal delivered
+ while in the single-step range. Nested signals aren't a
+ problem as they eventually all return. */
+ insert_step_resume_breakpoint_at_frame (get_current_frame ());
+ }
keep_going (ecs);
return;
}
if (what.call_dummy)
{
stop_stack_dummy = 1;
-#ifdef HP_OS_BUG
- trap_expected_after_continue = 1;
-#endif
}
switch (what.main_action)
/* If we hit the breakpoint at longjmp, disable it for the
duration of this command. Then, install a temporary
breakpoint at the target of the jmp_buf. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTATE_WHAT_SET_LONGJMP_RESUME\n");
disable_longjmp_breakpoint ();
remove_breakpoints ();
breakpoints_inserted = 0;
{
delete_step_resume_breakpoint (&step_resume_breakpoint);
}
- /* Not sure whether we need to blow this away too, but probably
- it is like the step-resume breakpoint. */
- if (through_sigtramp_breakpoint != NULL)
- {
- delete_breakpoint (through_sigtramp_breakpoint);
- through_sigtramp_breakpoint = NULL;
- }
-#if 0
- /* FIXME - Need to implement nested temporary breakpoints */
- if (step_over_calls > 0)
- set_longjmp_resume_breakpoint (jmp_buf_pc, get_current_frame ());
- else
-#endif /* 0 */
- set_longjmp_resume_breakpoint (jmp_buf_pc, null_frame_id);
+ set_longjmp_resume_breakpoint (jmp_buf_pc, null_frame_id);
ecs->handling_longjmp = 1; /* FIXME */
keep_going (ecs);
return;
case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME:
case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTATE_WHAT_CLEAR_LONGJMP_RESUME\n");
remove_breakpoints ();
breakpoints_inserted = 0;
-#if 0
- /* FIXME - Need to implement nested temporary breakpoints */
- if (step_over_calls
- && (frame_id_inner (get_frame_id (get_current_frame ()),
- step_frame_id)))
- {
- ecs->another_trap = 1;
- keep_going (ecs);
- return;
- }
-#endif /* 0 */
disable_longjmp_breakpoint ();
ecs->handling_longjmp = 0; /* FIXME */
if (what.main_action == BPSTAT_WHAT_CLEAR_LONGJMP_RESUME)
/* else fallthrough */
case BPSTAT_WHAT_SINGLE:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTATE_WHAT_SINGLE\n");
if (breakpoints_inserted)
{
remove_breakpoints ();
break;
case BPSTAT_WHAT_STOP_NOISY:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTATE_WHAT_STOP_NOISY\n");
stop_print_frame = 1;
- /* We are about to nuke the step_resume_breakpoint and
- through_sigtramp_breakpoint via the cleanup chain, so
- no need to worry about it here. */
+ /* We are about to nuke the step_resume_breakpointt via the
+ cleanup chain, so no need to worry about it here. */
stop_stepping (ecs);
return;
case BPSTAT_WHAT_STOP_SILENT:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTATE_WHAT_STOP_SILENT\n");
stop_print_frame = 0;
- /* We are about to nuke the step_resume_breakpoint and
- through_sigtramp_breakpoint via the cleanup chain, so
- no need to worry about it here. */
+ /* We are about to nuke the step_resume_breakpoin via the
+ cleanup chain, so no need to worry about it here. */
stop_stepping (ecs);
return;
step-resume bp, but it makes no effort to ensure that
the one deleted is the one currently stopped at. MVS */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTATE_WHAT_STEP_RESUME\n");
+
if (step_resume_breakpoint == NULL)
{
step_resume_breakpoint =
bpstat_find_step_resume_breakpoint (stop_bpstat);
}
delete_step_resume_breakpoint (&step_resume_breakpoint);
+ if (ecs->step_after_step_resume_breakpoint)
+ {
+ /* Back when the step-resume breakpoint was inserted, we
+ were trying to single-step off a breakpoint. Go back
+ to doing that. */
+ ecs->step_after_step_resume_breakpoint = 0;
+ remove_breakpoints ();
+ breakpoints_inserted = 0;
+ ecs->another_trap = 1;
+ keep_going (ecs);
+ return;
+ }
break;
case BPSTAT_WHAT_THROUGH_SIGTRAMP:
- if (through_sigtramp_breakpoint)
- delete_breakpoint (through_sigtramp_breakpoint);
- through_sigtramp_breakpoint = NULL;
-
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTATE_WHAT_THROUGH_SIGTRAMP\n");
/* If were waiting for a trap, hitting the step_resume_break
doesn't count as getting it. */
if (trap_expected)
case BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK:
#ifdef SOLIB_ADD
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTATE_WHAT_CHECK_SHLIBS\n");
/* Remove breakpoints, we eventually want to step over the
shlib event breakpoint, and SOLIB_ADD might adjust
breakpoint addresses via breakpoint_re_set. */
breakpoint_re_set. */
target_terminal_ours_for_output ();
/* NOTE: cagney/2003-11-25: Make certain that the target
- stack's section table is kept up-to-date. Architectures,
- (e.g., PPC64), use the section table to perform
- operations such as address => section name and hence
- require the table to contain all sections (including
- those found in shared libraries). */
+ stack's section table is kept up-to-date. Architectures,
+ (e.g., PPC64), use the section table to perform
+ operations such as address => section name and hence
+ require the table to contain all sections (including
+ those found in shared libraries). */
/* NOTE: cagney/2003-11-25: Pass current_target and not
- exec_ops to SOLIB_ADD. This is because current GDB is
- only tooled to propagate section_table changes out from
- the "current_target" (see target_resize_to_sections), and
- not up from the exec stratum. This, of course, isn't
- right. "infrun.c" should only interact with the
- exec/process stratum, instead relying on the target stack
- to propagate relevant changes (stop, section table
- changed, ...) up to other layers. */
+ exec_ops to SOLIB_ADD. This is because current GDB is
+ only tooled to propagate section_table changes out from
+ the "current_target" (see target_resize_to_sections), and
+ not up from the exec stratum. This, of course, isn't
+ right. "infrun.c" should only interact with the
+ exec/process stratum, instead relying on the target stack
+ to propagate relevant changes (stop, section table
+ changed, ...) up to other layers. */
SOLIB_ADD (NULL, 0, ¤t_target, auto_solib_add);
target_terminal_inferior ();
the call that caused this catchpoint to trigger. That
gives the user a more useful vantage from which to
examine their program's state. */
- else if (what.main_action ==
- BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK)
+ else if (what.main_action
+ == BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK)
{
/* ??rehrauer: If I could figure out how to get the
right return PC from here, we could just set a temp
test for stepping. But, if not stepping,
do not stop. */
- /* Are we stepping to get the inferior out of the dynamic
- linker's hook (and possibly the dld itself) after catching
- a shlib event? */
+ /* Are we stepping to get the inferior out of the dynamic linker's
+ hook (and possibly the dld itself) after catching a shlib
+ event? */
if (ecs->stepping_through_solib_after_catch)
{
#if defined(SOLIB_ADD)
/* Have we reached our destination? If not, keep going. */
if (SOLIB_IN_DYNAMIC_LINKER (PIDGET (ecs->ptid), stop_pc))
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepping in dynamic linker\n");
ecs->another_trap = 1;
keep_going (ecs);
return;
}
#endif
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: step past dynamic linker\n");
/* Else, stop and report the catchpoint(s) whose triggering
caused us to begin stepping. */
ecs->stepping_through_solib_after_catch = 0;
if (step_resume_breakpoint)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: step-resume breakpoint\n");
+
/* Having a step-resume breakpoint overrides anything
else having to do with stepping commands until
that breakpoint is reached. */
- /* I'm not sure whether this needs to be check_sigtramp2 or
- whether it could/should be keep_going. */
- check_sigtramp2 (ecs);
keep_going (ecs);
return;
}
if (step_range_end == 0)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: no stepping, continue\n");
/* Likewise if we aren't even stepping. */
- /* I'm not sure whether this needs to be check_sigtramp2 or
- whether it could/should be keep_going. */
- check_sigtramp2 (ecs);
keep_going (ecs);
return;
}
within it! */
if (stop_pc >= step_range_start && stop_pc < step_range_end)
{
- /* We might be doing a BPSTAT_WHAT_SINGLE and getting a signal.
- So definately need to check for sigtramp here. */
- check_sigtramp2 (ecs);
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepping inside range [0x%s-0x%s]\n",
+ paddr_nz (step_range_start),
+ paddr_nz (step_range_end));
keep_going (ecs);
return;
}
CORE_ADDR pc_after_resolver =
gdbarch_skip_solib_resolver (current_gdbarch, stop_pc);
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped into dynsym resolve code\n");
+
if (pc_after_resolver)
{
/* Set up a step-resume breakpoint at the address
init_sal (&sr_sal);
sr_sal.pc = pc_after_resolver;
- check_for_old_step_resume_breakpoint ();
- step_resume_breakpoint =
- set_momentary_breakpoint (sr_sal, null_frame_id, bp_step_resume);
- if (breakpoints_inserted)
- insert_breakpoints ();
+ insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
}
keep_going (ecs);
return;
}
- /* We can't update step_sp every time through the loop, because
- reading the stack pointer would slow down stepping too much.
- But we can update it every time we leave the step range. */
- ecs->update_step_sp = 1;
-
- /* Did we just step into a singal trampoline (either by stepping out
- of a handler, or by taking a signal)? */
- /* NOTE: cagney/2004-03-16: Replaced (except for legacy) a check for
- "pc_in_sigtramp(stop_pc) != pc_in_sigtramp(step_pc)" with
- frame_type == SIGTRAMP && !frame_id_eq. The latter is far more
- robust as it will correctly handle nested signal trampolines. */
- if (legacy_frame_p (current_gdbarch)
- ? (pc_in_sigtramp (stop_pc)
- && !pc_in_sigtramp (prev_pc)
- && INNER_THAN (read_sp (), step_sp))
- : (get_frame_type (get_current_frame ()) == SIGTRAMP_FRAME
- && !frame_id_eq (get_frame_id (get_current_frame ()), step_frame_id)))
+ if (step_range_end != 1
+ && (step_over_calls == STEP_OVER_UNDEBUGGABLE
+ || step_over_calls == STEP_OVER_ALL)
+ && get_frame_type (get_current_frame ()) == SIGTRAMP_FRAME)
{
- {
- struct frame_id current_frame = get_frame_id (get_current_frame ());
-
- if (frame_id_inner (current_frame, step_frame_id))
- {
- /* We have just taken a signal; go until we are back to
- the point where we took it and one more. */
-
- /* This code is needed at least in the following case:
- The user types "next" and then a signal arrives (before
- the "next" is done). */
-
- /* Note that if we are stopped at a breakpoint, then we need
- the step_resume breakpoint to override any breakpoints at
- the same location, so that we will still step over the
- breakpoint even though the signal happened. */
- struct symtab_and_line sr_sal;
-
- init_sal (&sr_sal);
- sr_sal.symtab = NULL;
- sr_sal.line = 0;
- sr_sal.pc = prev_pc;
- /* We could probably be setting the frame to
- step_frame_id; I don't think anyone thought to try it. */
- check_for_old_step_resume_breakpoint ();
- step_resume_breakpoint =
- set_momentary_breakpoint (sr_sal, null_frame_id, bp_step_resume);
- if (breakpoints_inserted)
- insert_breakpoints ();
- }
- else
- {
- /* We just stepped out of a signal handler and into
- its calling trampoline.
-
- Normally, we'd call step_over_function from
- here, but for some reason GDB can't unwind the
- stack correctly to find the real PC for the point
- user code where the signal trampoline will return
- -- FRAME_SAVED_PC fails, at least on HP-UX 10.20.
- But signal trampolines are pretty small stubs of
- code, anyway, so it's OK instead to just
- single-step out. Note: assuming such trampolines
- don't exhibit recursion on any platform... */
- find_pc_partial_function (stop_pc, &ecs->stop_func_name,
- &ecs->stop_func_start,
- &ecs->stop_func_end);
- /* Readjust stepping range */
- step_range_start = ecs->stop_func_start;
- step_range_end = ecs->stop_func_end;
- ecs->stepping_through_sigtramp = 1;
- }
- }
-
-
- /* If this is stepi or nexti, make sure that the stepping range
- gets us past that instruction. */
- if (step_range_end == 1)
- /* FIXME: Does this run afoul of the code below which, if
- we step into the middle of a line, resets the stepping
- range? */
- step_range_end = (step_range_start = prev_pc) + 1;
-
- ecs->remove_breakpoints_on_following_step = 1;
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped into signal trampoline\n");
+ /* The inferior, while doing a "step" or "next", has ended up in
+ a signal trampoline (either by a signal being delivered or by
+ the signal handler returning). Just single-step until the
+ inferior leaves the trampoline (either by calling the handler
+ or returning). */
keep_going (ecs);
return;
}
- if (((stop_pc == ecs->stop_func_start /* Quick test */
- || in_prologue (stop_pc, ecs->stop_func_start))
- && !IN_SOLIB_RETURN_TRAMPOLINE (stop_pc, ecs->stop_func_name))
- || IN_SOLIB_CALL_TRAMPOLINE (stop_pc, ecs->stop_func_name)
- || ecs->stop_func_name == 0)
+ if (frame_id_eq (frame_unwind_id (get_current_frame ()), step_frame_id))
{
/* It's a subroutine call. */
- handle_step_into_function (ecs);
- return;
- }
+ CORE_ADDR real_stop_pc;
- /* We've wandered out of the step range. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped into subroutine\n");
- ecs->sal = find_pc_line (stop_pc, 0);
+ if ((step_over_calls == STEP_OVER_NONE)
+ || ((step_range_end == 1)
+ && in_prologue (prev_pc, ecs->stop_func_start)))
+ {
+ /* I presume that step_over_calls is only 0 when we're
+ supposed to be stepping at the assembly language level
+ ("stepi"). Just stop. */
+ /* Also, maybe we just did a "nexti" inside a prolog, so we
+ thought it was a subroutine call but it was not. Stop as
+ well. FENN */
+ stop_step = 1;
+ print_stop_reason (END_STEPPING_RANGE, 0);
+ stop_stepping (ecs);
+ return;
+ }
- if (step_range_end == 1)
- {
- /* It is stepi or nexti. We always want to stop stepping after
- one instruction. */
- stop_step = 1;
- print_stop_reason (END_STEPPING_RANGE, 0);
- stop_stepping (ecs);
+ if (step_over_calls == STEP_OVER_ALL)
+ {
+ /* We're doing a "next", set a breakpoint at callee's return
+ address (the address at which the caller will
+ resume). */
+ insert_step_resume_breakpoint_at_frame (get_prev_frame (get_current_frame ()));
+ keep_going (ecs);
+ return;
+ }
+
+ /* If we are in a function call trampoline (a stub between the
+ calling routine and the real function), locate the real
+ function. That's what tells us (a) whether we want to step
+ into it at all, and (b) what prologue we want to run to the
+ end of, if we do step into it. */
+ real_stop_pc = skip_language_trampoline (stop_pc);
+ if (real_stop_pc == 0)
+ real_stop_pc = SKIP_TRAMPOLINE_CODE (stop_pc);
+ if (real_stop_pc != 0)
+ ecs->stop_func_start = real_stop_pc;
+
+ if (IN_SOLIB_DYNSYM_RESOLVE_CODE (ecs->stop_func_start))
+ {
+ struct symtab_and_line sr_sal;
+ init_sal (&sr_sal);
+ sr_sal.pc = ecs->stop_func_start;
+
+ insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
+ keep_going (ecs);
+ return;
+ }
+
+ /* If we have line number information for the function we are
+ thinking of stepping into, step into it.
+
+ If there are several symtabs at that PC (e.g. with include
+ files), just want to know whether *any* of them have line
+ numbers. find_pc_line handles this. */
+ {
+ struct symtab_and_line tmp_sal;
+
+ tmp_sal = find_pc_line (ecs->stop_func_start, 0);
+ if (tmp_sal.line != 0)
+ {
+ step_into_function (ecs);
+ return;
+ }
+ }
+
+ /* If we have no line number and the step-stop-if-no-debug is
+ set, we stop the step so that the user has a chance to switch
+ in assembly mode. */
+ if (step_over_calls == STEP_OVER_UNDEBUGGABLE && step_stop_if_no_debug)
+ {
+ stop_step = 1;
+ print_stop_reason (END_STEPPING_RANGE, 0);
+ stop_stepping (ecs);
+ return;
+ }
+
+ /* Set a breakpoint at callee's return address (the address at
+ which the caller will resume). */
+ insert_step_resume_breakpoint_at_frame (get_prev_frame (get_current_frame ()));
+ keep_going (ecs);
return;
}
/* Determine where this trampoline returns. */
CORE_ADDR real_stop_pc = SKIP_TRAMPOLINE_CODE (stop_pc);
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped into solib return tramp\n");
+
/* Only proceed through if we know where it's going. */
if (real_stop_pc)
{
init_sal (&sr_sal); /* initialize to zeroes */
sr_sal.pc = real_stop_pc;
sr_sal.section = find_pc_overlay (sr_sal.pc);
- /* Do not specify what the fp should be when we stop
- since on some machines the prologue
- is where the new fp value is established. */
- check_for_old_step_resume_breakpoint ();
- step_resume_breakpoint =
- set_momentary_breakpoint (sr_sal, null_frame_id, bp_step_resume);
- if (breakpoints_inserted)
- insert_breakpoints ();
+
+ /* Do not specify what the fp should be when we stop since
+ on some machines the prologue is where the new fp value
+ is established. */
+ insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
/* Restart without fiddling with the step ranges or
other state. */
}
}
+ /* NOTE: tausq/2004-05-24: This if block used to be done before all
+ the trampoline processing logic, however, there are some trampolines
+ that have no names, so we should do trampoline handling first. */
+ if (step_over_calls == STEP_OVER_UNDEBUGGABLE
+ && ecs->stop_func_name == NULL)
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped into undebuggable function\n");
+
+ /* The inferior just stepped into, or returned to, an
+ undebuggable function (where there is no symbol, not even a
+ minimal symbol, corresponding to the address where the
+ inferior stopped). Since we want to skip this kind of code,
+ we keep going until the inferior returns from this
+ function. */
+ if (step_stop_if_no_debug)
+ {
+ /* If we have no line number and the step-stop-if-no-debug
+ is set, we stop the step so that the user has a chance to
+ switch in assembly mode. */
+ stop_step = 1;
+ print_stop_reason (END_STEPPING_RANGE, 0);
+ stop_stepping (ecs);
+ return;
+ }
+ else
+ {
+ /* Set a breakpoint at callee's return address (the address
+ at which the caller will resume). */
+ insert_step_resume_breakpoint_at_frame (get_prev_frame (get_current_frame ()));
+ keep_going (ecs);
+ return;
+ }
+ }
+
+ if (step_range_end == 1)
+ {
+ /* It is stepi or nexti. We always want to stop stepping after
+ one instruction. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepi/nexti\n");
+ stop_step = 1;
+ print_stop_reason (END_STEPPING_RANGE, 0);
+ stop_stepping (ecs);
+ return;
+ }
+
+ ecs->sal = find_pc_line (stop_pc, 0);
+
if (ecs->sal.line == 0)
{
/* We have no line number information. That means to stop
stepping (does this always happen right after one instruction,
when we do "s" in a function with no line numbers,
or can this happen as a result of a return or longjmp?). */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: no line number info\n");
stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
we don't stop if we step into the middle of a different line.
That is said to make things like for (;;) statements work
better. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped to a different line\n");
stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
This is particularly necessary for a one-line function,
in which after skipping the prologue we better stop even though
we will be in mid-line. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped to a different function\n");
stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
stackless leaf function. I think the logic should instead look
at the unwound frame ID has that should give a more robust
indication of what happened. */
- if (step-ID == current-ID)
- still stepping in same function;
- else if (step-ID == unwind (current-ID))
- stepped into a function;
- else
- stepped out of a function;
- /* Of course this assumes that the frame ID unwind code is robust
- and we're willing to introduce frame unwind logic into this
- function. Fortunately, those days are nearly upon us. */
+ if (step - ID == current - ID)
+ still stepping in same function;
+ else if (step - ID == unwind (current - ID))
+ stepped into a function;
+ else
+ stepped out of a function;
+ /* Of course this assumes that the frame ID unwind code is robust
+ and we're willing to introduce frame unwind logic into this
+ function. Fortunately, those days are nearly upon us. */
#endif
{
struct frame_id current_frame = get_frame_id (get_current_frame ());
step_frame_id = current_frame;
}
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: keep going\n");
keep_going (ecs);
}
static int
currently_stepping (struct execution_control_state *ecs)
{
- return ((through_sigtramp_breakpoint == NULL
- && !ecs->handling_longjmp
+ return ((!ecs->handling_longjmp
&& ((step_range_end && step_resume_breakpoint == NULL)
|| trap_expected))
|| ecs->stepping_through_solib_after_catch
|| bpstat_should_step ());
}
-static void
-check_sigtramp2 (struct execution_control_state *ecs)
-{
- if (trap_expected
- && pc_in_sigtramp (stop_pc)
- && !pc_in_sigtramp (prev_pc)
- && INNER_THAN (read_sp (), step_sp))
- {
- /* What has happened here is that we have just stepped the
- inferior with a signal (because it is a signal which
- shouldn't make us stop), thus stepping into sigtramp.
-
- So we need to set a step_resume_break_address breakpoint and
- continue until we hit it, and then step. FIXME: This should
- be more enduring than a step_resume breakpoint; we should
- know that we will later need to keep going rather than
- re-hitting the breakpoint here (see the testsuite,
- gdb.base/signals.exp where it says "exceedingly difficult"). */
-
- struct symtab_and_line sr_sal;
-
- init_sal (&sr_sal); /* initialize to zeroes */
- sr_sal.pc = prev_pc;
- sr_sal.section = find_pc_overlay (sr_sal.pc);
- /* We perhaps could set the frame if we kept track of what the
- frame corresponding to prev_pc was. But we don't, so don't. */
- through_sigtramp_breakpoint =
- set_momentary_breakpoint (sr_sal, null_frame_id, bp_through_sigtramp);
- if (breakpoints_inserted)
- insert_breakpoints ();
-
- ecs->remove_breakpoints_on_following_step = 1;
- ecs->another_trap = 1;
- }
-}
-
/* Subroutine call with source code we should not step over. Do step
to the first line of code in it. */
``ecs->stop_func_start == stop_pc'' will never succeed. Adjust
ecs->stop_func_start to an address at which a breakpoint may be
legitimately placed.
-
+
Note: kevinb/2004-01-19: On FR-V, if this adjustment is not
made, GDB will enter an infinite loop when stepping through
optimized code consisting of VLIW instructions which contain
set, GDB will adjust the breakpoint address to the beginning of
the VLIW instruction. Thus, we need to make the corresponding
adjustment here when computing the stop address. */
-
+
if (gdbarch_adjust_breakpoint_address_p (current_gdbarch))
{
ecs->stop_func_start
= gdbarch_adjust_breakpoint_address (current_gdbarch,
- ecs->stop_func_start);
+ ecs->stop_func_start);
}
if (ecs->stop_func_start == stop_pc)
init_sal (&sr_sal); /* initialize to zeroes */
sr_sal.pc = ecs->stop_func_start;
sr_sal.section = find_pc_overlay (ecs->stop_func_start);
+
/* Do not specify what the fp should be when we stop since on
some machines the prologue is where the new fp value is
established. */
- check_for_old_step_resume_breakpoint ();
- step_resume_breakpoint =
- set_momentary_breakpoint (sr_sal, null_frame_id, bp_step_resume);
- if (breakpoints_inserted)
- insert_breakpoints ();
+ insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
/* And make sure stepping stops right away then. */
step_range_end = step_range_start;
keep_going (ecs);
}
-/* We've just entered a callee, and we wish to resume until it returns
- to the caller. Setting a step_resume breakpoint on the return
- address will catch a return from the callee.
-
- However, if the callee is recursing, we want to be careful not to
- catch returns of those recursive calls, but only of THIS instance
- of the caller.
+/* Insert a "step resume breakpoint" at SR_SAL with frame ID SR_ID.
+ This is used to both functions and to skip over code. */
- To do this, we set the step_resume bp's frame to our current
- caller's frame (obtained by doing a frame ID unwind). */
+static void
+insert_step_resume_breakpoint_at_sal (struct symtab_and_line sr_sal,
+ struct frame_id sr_id)
+{
+ /* There should never be more than one step-resume breakpoint per
+ thread, so we should never be setting a new
+ step_resume_breakpoint when one is already active. */
+ gdb_assert (step_resume_breakpoint == NULL);
+ step_resume_breakpoint = set_momentary_breakpoint (sr_sal, sr_id,
+ bp_step_resume);
+ if (breakpoints_inserted)
+ insert_breakpoints ();
+}
+
+/* Insert a "step resume breakpoint" at RETURN_FRAME.pc. This is used
+ to skip a function (next, skip-no-debug) or signal. It's assumed
+ that the function/signal handler being skipped eventually returns
+ to the breakpoint inserted at RETURN_FRAME.pc.
+
+ For the skip-function case, the function may have been reached by
+ either single stepping a call / return / signal-return instruction,
+ or by hitting a breakpoint. In all cases, the RETURN_FRAME belongs
+ to the skip-function's caller.
+
+ For the signals case, this is called with the interrupted
+ function's frame. The signal handler, when it returns, will resume
+ the interrupted function at RETURN_FRAME.pc. */
static void
-step_over_function (struct execution_control_state *ecs)
+insert_step_resume_breakpoint_at_frame (struct frame_info *return_frame)
{
struct symtab_and_line sr_sal;
- struct frame_id sr_id;
init_sal (&sr_sal); /* initialize to zeros */
- /* NOTE: cagney/2003-04-06:
-
- At this point the equality get_frame_pc() == get_frame_func()
- should hold. This may make it possible for this code to tell the
- frame where it's function is, instead of the reverse. This would
- avoid the need to search for the frame's function, which can get
- very messy when there is no debug info available (look at the
- heuristic find pc start code found in targets like the MIPS). */
-
- /* NOTE: cagney/2003-04-06:
-
- The intent of DEPRECATED_SAVED_PC_AFTER_CALL was to:
-
- - provide a very light weight equivalent to frame_unwind_pc()
- (nee FRAME_SAVED_PC) that avoids the prologue analyzer
-
- - avoid handling the case where the PC hasn't been saved in the
- prologue analyzer
-
- Unfortunately, not five lines further down, is a call to
- get_frame_id() and that is guarenteed to trigger the prologue
- analyzer.
-
- The `correct fix' is for the prologe analyzer to handle the case
- where the prologue is incomplete (PC in prologue) and,
- consequently, the return pc has not yet been saved. It should be
- noted that the prologue analyzer needs to handle this case
- anyway: frameless leaf functions that don't save the return PC;
- single stepping through a prologue.
-
- The d10v handles all this by bailing out of the prologue analsis
- when it reaches the current instruction. */
-
- if (DEPRECATED_SAVED_PC_AFTER_CALL_P ())
- sr_sal.pc = ADDR_BITS_REMOVE (DEPRECATED_SAVED_PC_AFTER_CALL (get_current_frame ()));
- else
- sr_sal.pc = ADDR_BITS_REMOVE (frame_pc_unwind (get_current_frame ()));
+ sr_sal.pc = ADDR_BITS_REMOVE (get_frame_pc (return_frame));
sr_sal.section = find_pc_overlay (sr_sal.pc);
- check_for_old_step_resume_breakpoint ();
-
- /* NOTE: cagney/2004-03-15: Code using the current value of
- "step_frame_id", instead of unwinding that frame ID, removed (at
- least for non-legacy platforms). On s390 GNU/Linux, after taking
- a signal, the program is directly resumed at the signal handler
- and, consequently, the PC would point at at the first instruction
- of that signal handler but STEP_FRAME_ID would [incorrectly] at
- the interrupted code when it should point at the signal
- trampoline. By always and locally doing a frame ID unwind, it's
- possible to assert that the code is always using the correct
- ID. */
- if (legacy_frame_p (current_gdbarch))
- {
- if (frame_id_p (step_frame_id)
- && !IN_SOLIB_DYNSYM_RESOLVE_CODE (sr_sal.pc))
- /* NOTE: cagney/2004-02-27: Use the global state's idea of the
- stepping frame ID. I suspect this is done as it is lighter
- weight than a call to get_prev_frame. */
- /* NOTE: cagney/2004-03-15: See comment above about how this
- is also broken. */
- sr_id = step_frame_id;
- else
- /* NOTE: cagney/2004-03-15: This is the way it was 'cos this
- is the way it always was. It should be using the unwound
- (or caller's) ID, and not this (or the callee's) ID. It
- appeared to work because: legacy architectures used the
- wrong end of the frame for the ID.stack (inner-most rather
- than outer-most) so that the callee's id.stack (un
- adjusted) matched the caller's id.stack giving the
- "correct" id; more often than not
- !IN_SOLIB_DYNSYM_RESOLVE_CODE and hence the code above (it
- was originally later in the function) fixed the ID by using
- global state. */
- sr_id = get_frame_id (get_current_frame ());
- }
- else
- sr_id = frame_unwind_id (get_current_frame ());
-
- step_resume_breakpoint = set_momentary_breakpoint (sr_sal, sr_id, bp_step_resume);
-
- if (breakpoints_inserted)
- insert_breakpoints ();
+ insert_step_resume_breakpoint_at_sal (sr_sal, get_frame_id (return_frame));
}
static void
stop_stepping (struct execution_control_state *ecs)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stop_stepping\n");
+
/* Let callers know we don't want to wait for the inferior anymore. */
ecs->wait_some_more = 0;
}
/* Save the pc before execution, to compare with pc after stop. */
prev_pc = read_pc (); /* Might have been DECR_AFTER_BREAK */
- if (ecs->update_step_sp)
- step_sp = read_sp ();
- ecs->update_step_sp = 0;
-
/* If we did not do break;, it means we should keep running the
inferior and not return to debugger. */
The signal was SIGTRAP, e.g. it was our signal, but we
decided we should resume from it.
- We're going to run this baby now!
+ We're going to run this baby now! */
- Insert breakpoints now, unless we are trying to one-proceed
- past a breakpoint. */
- /* If we've just finished a special step resume and we don't
- want to hit a breakpoint, pull em out. */
- if (step_resume_breakpoint == NULL
- && through_sigtramp_breakpoint == NULL
- && ecs->remove_breakpoints_on_following_step)
- {
- ecs->remove_breakpoints_on_following_step = 0;
- remove_breakpoints ();
- breakpoints_inserted = 0;
- }
- else if (!breakpoints_inserted &&
- (through_sigtramp_breakpoint != NULL || !ecs->another_trap))
+ if (!breakpoints_inserted && !ecs->another_trap)
{
breakpoints_failed = insert_breakpoints ();
if (breakpoints_failed)
static void
prepare_to_wait (struct execution_control_state *ecs)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: prepare_to_wait\n");
if (ecs->infwait_state == infwait_normal_state)
{
overlay_cache_invalid = 1;
{
case PRINT_UNKNOWN:
/* FIXME: cagney/2002-12-01: Given that a frame ID does
- (or should) carry around the function and does (or
- should) use that when doing a frame comparison. */
+ (or should) carry around the function and does (or
+ should) use that when doing a frame comparison. */
if (stop_step
&& frame_id_eq (step_frame_id,
get_frame_id (get_current_frame ()))
LOCATION: Print only location
SRC_AND_LOC: Print location and source line */
if (do_frame_printing)
- print_stack_frame (deprecated_selected_frame, -1, source_flag);
+ print_stack_frame (get_selected_frame (NULL), 0, source_flag);
/* Display the auto-display expressions. */
do_displays ();
done:
annotate_stopped ();
- observer_notify_normal_stop ();
+ observer_notify_normal_stop (stop_bpstat);
}
static int
write_inferior_status_register (struct inferior_status *inf_status, int regno,
LONGEST val)
{
- int size = DEPRECATED_REGISTER_RAW_SIZE (regno);
+ int size = register_size (current_gdbarch, regno);
void *buf = alloca (size);
store_signed_integer (buf, size, val);
regcache_raw_write (inf_status->registers, regno, buf);
if (!dbx_commands)
stop_command =
- add_cmd ("stop", class_obscure, not_just_help_class_command, "There is no `stop' command, but you can set a hook on `stop'.\n\
+ add_cmd ("stop", class_obscure, not_just_help_class_command,
+ "There is no `stop' command, but you can set a hook on `stop'.\n\
This allows you to set a list of commands to be run each time execution\n\
of the program stops.", &cmdlist);
+ add_set_cmd ("infrun", class_maintenance, var_zinteger,
+ &debug_infrun, "Set inferior debugging.\n\
+When non-zero, inferior specific debugging is enabled.", &setdebuglist);
+
numsigs = (int) TARGET_SIGNAL_LAST;
signal_stop = (unsigned char *) xmalloc (sizeof (signal_stop[0]) * numsigs);
signal_print = (unsigned char *)
signal_print[TARGET_SIGNAL_CANCEL] = 0;
#ifdef SOLIB_ADD
- add_show_from_set
+ deprecated_add_show_from_set
(add_set_cmd ("stop-on-solib-events", class_support, var_zinteger,
(char *) &stop_on_solib_events,
"Set stopping for shared library events.\n\
If nonzero, gdb will give control to the user when the dynamic linker\n\
notifies gdb of shared library events. The most common event of interest\n\
-to the user would be loading/unloading of a new library.\n", &setlist), &showlist);
+to the user would be loading/unloading of a new library.\n",
+ &setlist),
+ &showlist);
#endif
c = add_set_enum_cmd ("follow-fork-mode",
child - the new process is debugged after a fork\n\
The unfollowed process will continue to run.\n\
By default, the debugger will follow the parent process.", &setlist);
- add_show_from_set (c, &showlist);
+ deprecated_add_show_from_set (c, &showlist);
- c = add_set_enum_cmd ("scheduler-locking", class_run, scheduler_enums, /* array of string names */
+ c = add_set_enum_cmd ("scheduler-locking", class_run,
+ scheduler_enums, /* array of string names */
&scheduler_mode, /* current mode */
"Set mode for locking scheduler during execution.\n\
off == no locking (threads may preempt at any time)\n\
on == full locking (no thread except the current thread may run)\n\
step == scheduler locked during every single-step operation.\n\
In this mode, no other thread may run during a step command.\n\
- Other threads may run while stepping over a function call ('next').", &setlist);
+ Other threads may run while stepping over a function call ('next').",
+ &setlist);
set_cmd_sfunc (c, set_schedlock_func); /* traps on target vector */
- add_show_from_set (c, &showlist);
+ deprecated_add_show_from_set (c, &showlist);
c = add_set_cmd ("step-mode", class_run,
var_boolean, (char *) &step_stop_if_no_debug,
function without debug line information will stop at the first\n\
instruction of that function. Otherwise, the function is skipped and\n\
the step command stops at a different source line.", &setlist);
- add_show_from_set (c, &showlist);
+ deprecated_add_show_from_set (c, &showlist);
/* ptid initializations */
null_ptid = ptid_build (0, 0, 0);
projects / deliverable / binutils-gdb.git / blobdiff