-/* Start (run) and stop the inferior process, for GDB.
- Copyright 1986, 1987, 1988, 1989, 1991, 1992 Free Software Foundation, Inc.
+/* Target-struct-independent code to start (run) and stop an inferior process.
+ Copyright 1986, 87, 88, 89, 91, 92, 93, 94, 95, 96, 97, 1998
+ Free Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-
-/* Notes on the algorithm used in wait_for_inferior to determine if we
- just did a subroutine call when stepping. We have the following
- information at that point:
-
- Current and previous (just before this step) pc.
- Current and previous sp.
- Current and previous start of current function.
-
- If the starts of the functions don't match, then
-
- a) We did a subroutine call.
-
- In this case, the pc will be at the beginning of a function.
-
- b) We did a subroutine return.
-
- Otherwise.
-
- c) We did a longjmp.
-
- If we did a longjump, we were doing "nexti", since a next would
- have attempted to skip over the assembly language routine in which
- the longjmp is coded and would have simply been the equivalent of a
- continue. I consider this ok behaivior. We'd like one of two
- things to happen if we are doing a nexti through the longjmp()
- routine: 1) It behaves as a stepi, or 2) It acts like a continue as
- above. Given that this is a special case, and that anybody who
- thinks that the concept of sub calls is meaningful in the context
- of a longjmp, I'll take either one. Let's see what happens.
-
- Acts like a subroutine return. I can handle that with no problem
- at all.
-
- -->So: If the current and previous beginnings of the current
- function don't match, *and* the pc is at the start of a function,
- we've done a subroutine call. If the pc is not at the start of a
- function, we *didn't* do a subroutine call.
-
- -->If the beginnings of the current and previous function do match,
- either:
-
- a) We just did a recursive call.
-
- In this case, we would be at the very beginning of a
- function and 1) it will have a prologue (don't jump to
- before prologue, or 2) (we assume here that it doesn't have
- a prologue) there will have been a change in the stack
- pointer over the last instruction. (Ie. it's got to put
- the saved pc somewhere. The stack is the usual place. In
- a recursive call a register is only an option if there's a
- prologue to do something with it. This is even true on
- register window machines; the prologue sets up the new
- window. It might not be true on a register window machine
- where the call instruction moved the register window
- itself. Hmmm. One would hope that the stack pointer would
- also change. If it doesn't, somebody send me a note, and
- I'll work out a more general theory.
- bug-gdb@prep.ai.mit.edu). This is true (albeit slipperly
- so) on all machines I'm aware of:
-
- m68k: Call changes stack pointer. Regular jumps don't.
-
- sparc: Recursive calls must have frames and therefor,
- prologues.
-
- vax: All calls have frames and hence change the
- stack pointer.
-
- b) We did a return from a recursive call. I don't see that we
- have either the ability or the need to distinguish this
- from an ordinary jump. The stack frame will be printed
- when and if the frame pointer changes; if we are in a
- function without a frame pointer, it's the users own
- lookout.
-
- c) We did a jump within a function. We assume that this is
- true if we didn't do a recursive call.
-
- d) We are in no-man's land ("I see no symbols here"). We
- don't worry about this; it will make calls look like simple
- jumps (and the stack frames will be printed when the frame
- pointer moves), which is a reasonably non-violent response.
-*/
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include "defs.h"
-#include <string.h>
+#include "gdb_string.h"
+#include <ctype.h>
#include "symtab.h"
#include "frame.h"
#include "inferior.h"
#include "breakpoint.h"
#include "wait.h"
#include "gdbcore.h"
-#include "signame.h"
-#include "command.h"
-#include "terminal.h" /* For #ifdef TIOCGPGRP and new_tty */
+#include "gdbcmd.h"
#include "target.h"
+#include "gdbthread.h"
+#include "annotate.h"
+#include "symfile.h" /* for overlay functions */
#include <signal.h>
-/* unistd.h is needed to #define X_OK */
-#ifdef USG
-#include <unistd.h>
-#else
-#include <sys/file.h>
-#endif
-
-#ifdef SET_STACK_LIMIT_HUGE
-#include <sys/time.h>
-#include <sys/resource.h>
-
-extern int original_stack_limit;
-#endif /* SET_STACK_LIMIT_HUGE */
-
/* Prototypes for local functions */
-static void
-signals_info PARAMS ((char *));
+static void signals_info PARAMS ((char *, int));
-static void
-handle_command PARAMS ((char *, int));
+static void handle_command PARAMS ((char *, int));
-static void
-sig_print_info PARAMS ((int));
+static void sig_print_info PARAMS ((enum target_signal));
-static void
-sig_print_header PARAMS ((void));
+static void sig_print_header PARAMS ((void));
-static void
-remove_step_breakpoint PARAMS ((void));
+static void resume_cleanups PARAMS ((int));
-static void
-insert_step_breakpoint PARAMS ((void));
+static int hook_stop_stub PARAMS ((char *));
-static void
-resume PARAMS ((int, int));
+static void delete_breakpoint_current_contents PARAMS ((PTR));
-static void
-resume_cleanups PARAMS ((int));
+int inferior_ignoring_startup_exec_events = 0;
+int inferior_ignoring_leading_exec_events = 0;
-extern char **environ;
+#ifdef HPUXHPPA
+/* wait_for_inferior and normal_stop use this to notify the user
+ when the inferior stopped in a different thread than it had been
+ running in. */
+static int switched_from_inferior_pid;
+#endif
-extern struct target_ops child_ops; /* In inftarg.c */
+/* resume and wait_for_inferior use this to ensure that when
+ stepping over a hit breakpoint in a threaded application
+ only the thread that hit the breakpoint is stepped and the
+ other threads don't continue. This prevents having another
+ thread run past the breakpoint while it is temporarily
+ removed.
-/* Sigtramp is a routine that the kernel calls (which then calls the
- signal handler). On most machines it is a library routine that
- is linked into the executable.
+ This is not thread-specific, so it isn't saved as part of
+ the infrun state.
- This macro, given a program counter value and the name of the
- function in which that PC resides (which can be null if the
- name is not known), returns nonzero if the PC and name show
- that we are in sigtramp.
+ Versions of gdb which don't use the "step == this thread steps
+ and others continue" model but instead use the "step == this
+ thread steps and others wait" shouldn't do this. */
+static int thread_step_needed = 0;
- On most machines just see if the name is sigtramp (and if we have
- no name, assume we are not in sigtramp). */
-#if !defined (IN_SIGTRAMP)
-#define IN_SIGTRAMP(pc, name) \
- (name && !strcmp ("_sigtramp", name))
-#endif
+void _initialize_infrun PARAMS ((void));
/* GET_LONGJMP_TARGET returns the PC at which longjmp() will resume the
program. It needs to examine the jmp_buf argument and extract the PC
from it. The return value is non-zero on success, zero otherwise. */
+
#ifndef GET_LONGJMP_TARGET
#define GET_LONGJMP_TARGET(PC_ADDR) 0
#endif
/* Some machines have trampoline code that sits between function callers
and the actual functions themselves. If this machine doesn't have
such things, disable their processing. */
+
#ifndef SKIP_TRAMPOLINE_CODE
#define SKIP_TRAMPOLINE_CODE(pc) 0
#endif
+/* Dynamic function trampolines are similar to solib trampolines in that they
+ are between the caller and the callee. The difference is that when you
+ enter a dynamic trampoline, you can't determine the callee's address. Some
+ (usually complex) code needs to run in the dynamic trampoline to figure out
+ the callee's address. This macro is usually called twice. First, when we
+ enter the trampoline (looks like a normal function call at that point). It
+ should return the PC of a point within the trampoline where the callee's
+ address is known. Second, when we hit the breakpoint, this routine returns
+ the callee's address. At that point, things proceed as per a step resume
+ breakpoint. */
+
+#ifndef DYNAMIC_TRAMPOLINE_NEXTPC
+#define DYNAMIC_TRAMPOLINE_NEXTPC(pc) 0
+#endif
+
+/* On SVR4 based systems, determining the callee's address is exceedingly
+ difficult and depends on the implementation of the run time loader.
+ If we are stepping at the source level, we single step until we exit
+ the run time loader code and reach the callee's address. */
-#ifdef TDESC
-#include "tdesc.h"
-int safe_to_init_tdesc_context = 0;
-extern dc_dcontext_t current_context;
+#ifndef IN_SOLIB_DYNSYM_RESOLVE_CODE
+#define IN_SOLIB_DYNSYM_RESOLVE_CODE(pc) 0
#endif
-/* Tables of how to react to signals; the user sets them. */
+/* For SVR4 shared libraries, each call goes through a small piece of
+ trampoline code in the ".plt" section. IN_SOLIB_CALL_TRAMPOLINE evaluates
+ to nonzero if we are current stopped in one of these. */
+
+#ifndef IN_SOLIB_CALL_TRAMPOLINE
+#define IN_SOLIB_CALL_TRAMPOLINE(pc,name) 0
+#endif
-static char signal_stop[NSIG];
-static char signal_print[NSIG];
-static char signal_program[NSIG];
+/* In some shared library schemes, the return path from a shared library
+ call may need to go through a trampoline too. */
-/* Nonzero if breakpoints are now inserted in the inferior. */
-/* Nonstatic for initialization during xxx_create_inferior. FIXME. */
+#ifndef IN_SOLIB_RETURN_TRAMPOLINE
+#define IN_SOLIB_RETURN_TRAMPOLINE(pc,name) 0
+#endif
-/*static*/ int breakpoints_inserted;
+/* On MIPS16, a function that returns a floating point value may call
+ a library helper function to copy the return value to a floating point
+ register. The IGNORE_HELPER_CALL macro returns non-zero if we
+ should ignore (i.e. step over) this function call. */
+#ifndef IGNORE_HELPER_CALL
+#define IGNORE_HELPER_CALL(pc) 0
+#endif
-/* Function inferior was in as of last step command. */
+/* On some systems, the PC may be left pointing at an instruction that won't
+ actually be executed. This is usually indicated by a bit in the PSW. If
+ we find ourselves in such a state, then we step the target beyond the
+ nullified instruction before returning control to the user so as to avoid
+ confusion. */
-static struct symbol *step_start_function;
+#ifndef INSTRUCTION_NULLIFIED
+#define INSTRUCTION_NULLIFIED 0
+#endif
+
+/* Tables of how to react to signals; the user sets them. */
+
+static unsigned char *signal_stop;
+static unsigned char *signal_print;
+static unsigned char *signal_program;
-/* Nonzero => address for special breakpoint for resuming stepping. */
+#define SET_SIGS(nsigs,sigs,flags) \
+ do { \
+ int signum = (nsigs); \
+ while (signum-- > 0) \
+ if ((sigs)[signum]) \
+ (flags)[signum] = 1; \
+ } while (0)
-static CORE_ADDR step_resume_break_address;
+#define UNSET_SIGS(nsigs,sigs,flags) \
+ do { \
+ int signum = (nsigs); \
+ while (signum-- > 0) \
+ if ((sigs)[signum]) \
+ (flags)[signum] = 0; \
+ } while (0)
-/* Pointer to orig contents of the byte where the special breakpoint is. */
-static char step_resume_break_shadow[BREAKPOINT_MAX];
+/* Command list pointer for the "stop" placeholder. */
-/* Nonzero means the special breakpoint is a duplicate
- so it has not itself been inserted. */
+static struct cmd_list_element *stop_command;
-static int step_resume_break_duplicate;
+/* Nonzero if breakpoints are now inserted in the inferior. */
+
+static int breakpoints_inserted;
+
+/* Function inferior was in as of last step command. */
+
+static struct symbol *step_start_function;
/* Nonzero if we are expecting a trace trap and should proceed from it. */
static int trap_expected;
+#ifdef SOLIB_ADD
+/* Nonzero if we want to give control to the user when we're notified
+ of shared library events by the dynamic linker. */
+static int stop_on_solib_events;
+#endif
+
+#ifdef HP_OS_BUG
/* Nonzero if the next time we try to continue the inferior, it will
step one instruction and generate a spurious trace trap.
This is used to compensate for a bug in HP-UX. */
static int trap_expected_after_continue;
+#endif
/* Nonzero means expecting a trace trap
and should stop the inferior and return silently when it happens. */
int stop_soon_quietly;
-/* Nonzero if pc has been changed by the debugger
- since the inferior stopped. */
-
-int pc_changed;
-
/* Nonzero if proceed is being used for a "finish" command or a similar
situation when stop_registers should be saved. */
static int stop_print_frame;
-#ifdef NO_SINGLE_STEP
-extern int one_stepped; /* From machine dependent code */
-extern void single_step (); /* Same. */
-#endif /* NO_SINGLE_STEP */
+static struct breakpoint *step_resume_breakpoint = NULL;
+static struct breakpoint *through_sigtramp_breakpoint = NULL;
+
+/* On some platforms (e.g., HP-UX), hardware watchpoints have bad
+ interactions with an inferior that is running a kernel function
+ (aka, a system call or "syscall"). wait_for_inferior therefore
+ may have a need to know when the inferior is in a syscall. This
+ is a count of the number of inferior threads which are known to
+ currently be running in a syscall. */
+static int number_of_threads_in_syscalls;
+
+/* This is used to remember when a fork, vfork or exec event
+ was caught by a catchpoint, and thus the event is to be
+ followed at the next resume of the inferior, and not
+ immediately. */
+static struct {
+ enum target_waitkind kind;
+ struct {
+ int parent_pid;
+ int saw_parent_fork;
+ int child_pid;
+ int saw_child_fork;
+ int saw_child_exec;
+ } fork_event;
+ char * execd_pathname;
+} pending_follow;
+
+/* Some platforms don't allow us to do anything meaningful with a
+ vforked child until it has exec'd. Vforked processes on such
+ platforms can only be followed after they've exec'd.
+
+ When this is set to 0, a vfork can be immediately followed,
+ and an exec can be followed merely as an exec. When this is
+ set to 1, a vfork event has been seen, but cannot be followed
+ until the exec is seen.
+
+ (In the latter case, inferior_pid is still the parent of the
+ vfork, and pending_follow.fork_event.child_pid is the child. The
+ appropriate process is followed, according to the setting of
+ follow-fork-mode.) */
+static int follow_vfork_when_exec;
+
+static char * follow_fork_mode_kind_names [] = {
+/* ??rehrauer: The "both" option is broken, by what may be a 10.20
+ kernel problem. It's also not terribly useful without a GUI to
+ help the user drive two debuggers. So for now, I'm disabling
+ the "both" option.
+ "parent", "child", "both", "ask" };
+ */
+ "parent", "child", "ask" };
+
+static char * follow_fork_mode_string = NULL;
+
+\f
+#if defined(HPUXHPPA)
+static void
+follow_inferior_fork (parent_pid, child_pid, has_forked, has_vforked)
+ int parent_pid;
+ int child_pid;
+ int has_forked;
+ int has_vforked;
+{
+ int followed_parent = 0;
+ int followed_child = 0;
+ int ima_clone = 0;
+
+ /* Which process did the user want us to follow? */
+ char * follow_mode =
+ savestring (follow_fork_mode_string, strlen (follow_fork_mode_string));
+
+ /* Or, did the user not know, and want us to ask? */
+ if (STREQ (follow_fork_mode_string, "ask"))
+ {
+ char requested_mode[100];
+
+ free (follow_mode);
+ error ("\"ask\" mode NYI");
+ follow_mode = savestring (requested_mode, strlen (requested_mode));
+ }
+
+ /* If we're to be following the parent, then detach from child_pid.
+ We're already following the parent, so need do nothing explicit
+ for it. */
+ if (STREQ (follow_mode, "parent"))
+ {
+ followed_parent = 1;
+
+ /* We're already attached to the parent, by default. */
+
+ /* Before detaching from the child, remove all breakpoints from
+ it. (This won't actually modify the breakpoint list, but will
+ physically remove the breakpoints from the child.) */
+ if (! has_vforked || ! follow_vfork_when_exec)
+ {
+ detach_breakpoints (child_pid);
+ SOLIB_REMOVE_INFERIOR_HOOK (child_pid);
+ }
+
+ /* Detach from the child. */
+ dont_repeat ();
+
+ target_require_detach (child_pid, "", 1);
+ }
+
+ /* If we're to be following the child, then attach to it, detach
+ from inferior_pid, and set inferior_pid to child_pid. */
+ else if (STREQ (follow_mode, "child"))
+ {
+ char child_pid_spelling [100]; /* Arbitrary length. */
+
+ followed_child = 1;
+
+ /* Before detaching from the parent, detach all breakpoints from
+ the child. But only if we're forking, or if we follow vforks
+ as soon as they happen. (If we're following vforks only when
+ the child has exec'd, then it's very wrong to try to write
+ back the "shadow contents" of inserted breakpoints now -- they
+ belong to the child's pre-exec'd a.out.) */
+ if (! has_vforked || ! follow_vfork_when_exec)
+ {
+ detach_breakpoints (child_pid);
+ }
+
+ /* Before detaching from the parent, remove all breakpoints from it. */
+ remove_breakpoints ();
+
+ /* Also reset the solib inferior hook from the parent. */
+ SOLIB_REMOVE_INFERIOR_HOOK (inferior_pid);
+
+ /* Detach from the parent. */
+ dont_repeat ();
+ target_detach (NULL, 1);
+
+ /* Attach to the child. */
+ inferior_pid = child_pid;
+ sprintf (child_pid_spelling, "%d", child_pid);
+ dont_repeat ();
+
+ target_require_attach (child_pid_spelling, 1);
+
+ /* Was there a step_resume breakpoint? (There was if the user
+ did a "next" at the fork() call.) If so, explicitly reset its
+ thread number.
+
+ step_resumes are a form of bp that are made to be per-thread.
+ Since we created the step_resume bp when the parent process
+ was being debugged, and now are switching to the child process,
+ from the breakpoint package's viewpoint, that's a switch of
+ "threads". We must update the bp's notion of which thread
+ it is for, or it'll be ignored when it triggers... */
+ if (step_resume_breakpoint && (! has_vforked || ! follow_vfork_when_exec))
+ breakpoint_re_set_thread (step_resume_breakpoint);
+
+ /* Reinsert all breakpoints in the child. (The user may've set
+ breakpoints after catching the fork, in which case those
+ actually didn't get set in the child, but only in the parent.) */
+ if (! has_vforked || ! follow_vfork_when_exec)
+ {
+ breakpoint_re_set ();
+ insert_breakpoints ();
+ }
+ }
+
+ /* If we're to be following both parent and child, then fork ourselves,
+ and attach the debugger clone to the child. */
+ else if (STREQ (follow_mode, "both"))
+ {
+ char pid_suffix [100]; /* Arbitrary length. */
+
+ /* Clone ourselves to follow the child. This is the end of our
+ involvement with child_pid; our clone will take it from here... */
+ dont_repeat ();
+ target_clone_and_follow_inferior (child_pid, &followed_child);
+ followed_parent = !followed_child;
+
+ /* We continue to follow the parent. To help distinguish the two
+ debuggers, though, both we and our clone will reset our prompts. */
+ sprintf (pid_suffix, "[%d] ", inferior_pid);
+ set_prompt (strcat (get_prompt (), pid_suffix));
+ }
+
+ /* The parent and child of a vfork share the same address space.
+ Also, on some targets the order in which vfork and exec events
+ are received for parent in child requires some delicate handling
+ of the events.
+
+ For instance, on ptrace-based HPUX we receive the child's vfork
+ event first, at which time the parent has been suspended by the
+ OS and is essentially untouchable until the child's exit or second
+ exec event arrives. At that time, the parent's vfork event is
+ delivered to us, and that's when we see and decide how to follow
+ the vfork. But to get to that point, we must continue the child
+ until it execs or exits. To do that smoothly, all breakpoints
+ must be removed from the child, in case there are any set between
+ the vfork() and exec() calls. But removing them from the child
+ also removes them from the parent, due to the shared-address-space
+ nature of a vfork'd parent and child. On HPUX, therefore, we must
+ take care to restore the bp's to the parent before we continue it.
+ Else, it's likely that we may not stop in the expected place. (The
+ worst scenario is when the user tries to step over a vfork() call;
+ the step-resume bp must be restored for the step to properly stop
+ in the parent after the call completes!)
+
+ Sequence of events, as reported to gdb from HPUX:
+
+ Parent Child Action for gdb to take
+ -------------------------------------------------------
+ 1 VFORK Continue child
+ 2 EXEC
+ 3 EXEC or EXIT
+ 4 VFORK */
+ if (has_vforked)
+ {
+ target_post_follow_vfork (parent_pid,
+ followed_parent,
+ child_pid,
+ followed_child);
+ }
+
+ pending_follow.fork_event.saw_parent_fork = 0;
+ pending_follow.fork_event.saw_child_fork = 0;
+
+ free (follow_mode);
+}
+
+static void
+follow_fork (parent_pid, child_pid)
+ int parent_pid;
+ int child_pid;
+{
+ follow_inferior_fork (parent_pid, child_pid, 1, 0);
+}
+
+
+/* Forward declaration. */
+static void follow_exec PARAMS((int, char *));
+
+static void
+follow_vfork (parent_pid, child_pid)
+ int parent_pid;
+ int child_pid;
+{
+ follow_inferior_fork (parent_pid, child_pid, 0, 1);
+
+ /* Did we follow the child? Had it exec'd before we saw the parent vfork? */
+ if (pending_follow.fork_event.saw_child_exec && (inferior_pid == child_pid))
+ {
+ pending_follow.fork_event.saw_child_exec = 0;
+ pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
+ follow_exec (inferior_pid, pending_follow.execd_pathname);
+ free (pending_follow.execd_pathname);
+ }
+}
+#endif /* HPUXHPPA */
+
+static void
+follow_exec (pid, execd_pathname)
+ int pid;
+ char * execd_pathname;
+{
+#ifdef HPUXHPPA
+ int saved_pid = pid;
+ extern struct target_ops child_ops;
+
+ /* Did this exec() follow a vfork()? If so, we must follow the
+ vfork now too. Do it before following the exec. */
+ if (follow_vfork_when_exec && (pending_follow.kind == TARGET_WAITKIND_VFORKED))
+ {
+ pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
+ follow_vfork (inferior_pid, pending_follow.fork_event.child_pid);
+ follow_vfork_when_exec = 0;
+ saved_pid = inferior_pid;
+
+ /* Did we follow the parent? If so, we're done. If we followed
+ the child then we must also follow its exec(). */
+ if (inferior_pid == pending_follow.fork_event.parent_pid)
+ return;
+ }
+
+ /* This is an exec event that we actually wish to pay attention to.
+ Refresh our symbol table to the newly exec'd program, remove any
+ momentary bp's, etc.
+
+ If there are breakpoints, they aren't really inserted now,
+ since the exec() transformed our inferior into a fresh set
+ of instructions.
+
+ We want to preserve symbolic breakpoints on the list, since
+ we have hopes that they can be reset after the new a.out's
+ symbol table is read.
+
+ However, any "raw" breakpoints must be removed from the list
+ (e.g., the solib bp's), since their address is probably invalid
+ now.
+
+ And, we DON'T want to call delete_breakpoints() here, since
+ that may write the bp's "shadow contents" (the instruction
+ value that was overwritten witha TRAP instruction). Since
+ we now have a new a.out, those shadow contents aren't valid. */
+ update_breakpoints_after_exec ();
+
+ /* If there was one, it's gone now. We cannot truly step-to-next
+ statement through an exec(). */
+ step_resume_breakpoint = NULL;
+ step_range_start = 0;
+ step_range_end = 0;
+
+ /* If there was one, it's gone now. */
+ through_sigtramp_breakpoint = NULL;
+
+ /* What is this a.out's name? */
+ printf_unfiltered ("Executing new program: %s\n", execd_pathname);
+
+ /* We've followed the inferior through an exec. Therefore, the
+ inferior has essentially been killed & reborn. */
+ gdb_flush (gdb_stdout);
+ target_mourn_inferior ();
+ inferior_pid = saved_pid; /* Because mourn_inferior resets inferior_pid. */
+ push_target (&child_ops);
+
+ /* That a.out is now the one to use. */
+ exec_file_attach (execd_pathname, 0);
+
+ /* And also is where symbols can be found. */
+ symbol_file_command (execd_pathname, 0);
+
+ /* Reset the shared library package. This ensures that we get
+ a shlib event when the child reaches "_start", at which point
+ the dld will have had a chance to initialize the child. */
+ SOLIB_RESTART ();
+ SOLIB_CREATE_INFERIOR_HOOK (inferior_pid);
+
+ /* Reinsert all breakpoints. (Those which were symbolic have
+ been reset to the proper address in the new a.out, thanks
+ to symbol_file_command...) */
+ insert_breakpoints ();
+
+ /* The next resume of this inferior should bring it to the shlib
+ startup breakpoints. (If the user had also set bp's on
+ "main" from the old (parent) process, then they'll auto-
+ matically get reset there in the new process.) */
+#endif
+}
+
+/* Non-zero if we just simulating a single-step. This is needed
+ because we cannot remove the breakpoints in the inferior process
+ until after the `wait' in `wait_for_inferior'. */
+static int singlestep_breakpoints_inserted_p = 0;
\f
/* Things to clean up if we QUIT out of resume (). */
STEP nonzero if we should step (zero to continue instead).
SIG is the signal to give the inferior (zero for none). */
-static void
+void
resume (step, sig)
int step;
- int sig;
+ enum target_signal sig;
{
- struct cleanup *old_cleanups = make_cleanup (resume_cleanups, 0);
+ int should_resume = 1;
+ struct cleanup *old_cleanups = make_cleanup ((make_cleanup_func)
+ resume_cleanups, 0);
QUIT;
-#ifdef NO_SINGLE_STEP
- if (step) {
- single_step(sig); /* Do it the hard way, w/temp breakpoints */
- step = 0; /* ...and don't ask hardware to do it. */
- }
+#ifdef CANNOT_STEP_BREAKPOINT
+ /* Most targets can step a breakpoint instruction, thus executing it
+ normally. But if this one cannot, just continue and we will hit
+ it anyway. */
+ if (step && breakpoints_inserted && breakpoint_here_p (read_pc ()))
+ step = 0;
#endif
+ if (SOFTWARE_SINGLE_STEP_P && step)
+ {
+ /* Do it the hard way, w/temp breakpoints */
+ SOFTWARE_SINGLE_STEP (sig, 1 /*insert-breakpoints*/);
+ /* ...and don't ask hardware to do it. */
+ step = 0;
+ /* and do not pull these breakpoints until after a `wait' in
+ `wait_for_inferior' */
+ singlestep_breakpoints_inserted_p = 1;
+ }
+
/* Handle any optimized stores to the inferior NOW... */
#ifdef DO_DEFERRED_STORES
DO_DEFERRED_STORES;
#endif
- target_resume (step, sig);
+#ifdef HPUXHPPA
+ /* If there were any forks/vforks/execs that were caught and are
+ now to be followed, then do so. */
+ switch (pending_follow.kind)
+ {
+ case (TARGET_WAITKIND_FORKED):
+ pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
+ follow_fork (inferior_pid, pending_follow.fork_event.child_pid);
+ break;
+
+ case (TARGET_WAITKIND_VFORKED):
+ {
+ int saw_child_exec = pending_follow.fork_event.saw_child_exec;
+
+ pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
+ follow_vfork (inferior_pid, pending_follow.fork_event.child_pid);
+
+ /* Did we follow the child, but not yet see the child's exec event?
+ If so, then it actually ought to be waiting for us; we respond to
+ parent vfork events. We don't actually want to resume the child
+ in this situation; we want to just get its exec event. */
+ if (! saw_child_exec && (inferior_pid == pending_follow.fork_event.child_pid))
+ should_resume = 0;
+ }
+ break;
+
+ case (TARGET_WAITKIND_EXECD):
+ /* If we saw a vfork event but couldn't follow it until we saw
+ an exec, then now might be the time! */
+ pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
+ /* follow_exec is called as soon as the exec event is seen. */
+ break;
+
+ default:
+ break;
+ }
+#endif /* HPUXHPPA */
+
+ /* Install inferior's terminal modes. */
+ target_terminal_inferior ();
+
+ if (should_resume)
+ {
+#ifdef HPUXHPPA
+ if (thread_step_needed)
+ {
+ /* We stopped on a BPT instruction;
+ don't continue other threads and
+ just step this thread. */
+ thread_step_needed = 0;
+
+ if (!breakpoint_here_p(read_pc()))
+ {
+ /* Breakpoint deleted: ok to do regular resume
+ where all the threads either step or continue. */
+ target_resume (-1, step, sig);
+ }
+ else
+ {
+ if (!step)
+ {
+ warning ( "Internal error, changing continue to step." );
+ remove_breakpoints ();
+ breakpoints_inserted = 0;
+ trap_expected = 1;
+ step = 1;
+ }
+
+ target_resume (inferior_pid, step, sig);
+ }
+ }
+ else
+#endif /* HPUXHPPA */
+
+ /* Vanilla resume. */
+ target_resume (-1, step, sig);
+ }
+
discard_cleanups (old_cleanups);
}
step_range_end = 0;
step_frame_address = 0;
step_over_calls = -1;
- step_resume_break_address = 0;
stop_after_trap = 0;
stop_soon_quietly = 0;
proceed_to_finish = 0;
void
proceed (addr, siggnal, step)
CORE_ADDR addr;
- int siggnal;
+ enum target_signal siggnal;
int step;
{
int oneproc = 0;
{
/* If there is a breakpoint at the address we will resume at,
step one instruction before inserting breakpoints
- so that we do not stop right away. */
+ so that we do not stop right away (and report a second
+ hit at this breakpoint). */
+
+ if (read_pc () == stop_pc && breakpoint_here_p (read_pc ()))
+ oneproc = 1;
- if (!pc_changed && breakpoint_here_p (read_pc ()))
+#ifndef STEP_SKIPS_DELAY
+#define STEP_SKIPS_DELAY(pc) (0)
+#define STEP_SKIPS_DELAY_P (0)
+#endif
+ /* Check breakpoint_here_p first, because breakpoint_here_p is fast
+ (it just checks internal GDB data structures) and STEP_SKIPS_DELAY
+ is slow (it needs to read memory from the target). */
+ if (STEP_SKIPS_DELAY_P
+ && breakpoint_here_p (read_pc () + 4)
+ && STEP_SKIPS_DELAY (read_pc ()))
oneproc = 1;
}
else
{
- write_register (PC_REGNUM, addr);
-#ifdef NPC_REGNUM
- write_register (NPC_REGNUM, addr + 4);
-#ifdef NNPC_REGNUM
- write_register (NNPC_REGNUM, addr + 8);
-#endif
-#endif
+ write_pc (addr);
+
+ /* New address; we don't need to single-step a thread
+ over a breakpoint we just hit, 'cause we aren't
+ continuing from there.
+
+ It's not worth worrying about the case where a user
+ asks for a "jump" at the current PC--if they get the
+ hiccup of re-hiting a hit breakpoint, what else do
+ they expect? */
+ thread_step_needed = 0;
+ }
+
+#ifdef PREPARE_TO_PROCEED
+ /* In a multi-threaded task we may select another thread
+ and then continue or step.
+
+ But if the old thread was stopped at a breakpoint, it
+ will immediately cause another breakpoint stop without
+ any execution (i.e. it will report a breakpoint hit
+ incorrectly). So we must step over it first.
+
+ PREPARE_TO_PROCEED checks the current thread against the thread
+ that reported the most recent event. If a step-over is required
+ it returns TRUE and sets the current thread to the old thread. */
+ if (PREPARE_TO_PROCEED() && breakpoint_here_p (read_pc()))
+ {
+ oneproc = 1;
+ thread_step_needed = 1;
}
+#endif /* PREPARE_TO_PROCEED */
+
+#ifdef HP_OS_BUG
if (trap_expected_after_continue)
{
/* If (step == 0), a trap will be automatically generated after
oneproc = 1;
trap_expected_after_continue = 0;
}
+#endif /* HP_OS_BUG */
if (oneproc)
/* We will get a trace trap after one instruction.
error ("Cannot insert breakpoints.\n\
The same program may be running in another process.");
}
+
breakpoints_inserted = 1;
}
- /* Install inferior's terminal modes. */
- target_terminal_inferior ();
-
- if (siggnal >= 0)
+ if (siggnal != TARGET_SIGNAL_DEFAULT)
stop_signal = siggnal;
/* If this signal should not be seen by program,
give it zero. Used for debugging signals. */
- else if (stop_signal < NSIG && !signal_program[stop_signal])
- stop_signal= 0;
+ else if (!signal_program[stop_signal])
+ stop_signal = TARGET_SIGNAL_0;
+
+ annotate_starting ();
+
+ /* Make sure that output from GDB appears before output from the
+ inferior. */
+ gdb_flush (gdb_stdout);
/* Resume inferior. */
resume (oneproc || step || bpstat_should_step (), stop_signal);
to be preserved over calls to it and cleared when the inferior
is started. */
static CORE_ADDR prev_pc;
-static CORE_ADDR prev_sp;
static CORE_ADDR prev_func_start;
static char *prev_func_name;
\f
-/* Start an inferior Unix child process and sets inferior_pid to its pid.
- EXEC_FILE is the file to run.
- ALLARGS is a string containing the arguments to the program.
- ENV is the environment vector to pass. Errors reported with error(). */
-
-#ifndef SHELL_FILE
-#define SHELL_FILE "/bin/sh"
-#endif
-
-void
-child_create_inferior (exec_file, allargs, env)
- char *exec_file;
- char *allargs;
- char **env;
-{
- int pid;
- char *shell_command;
- extern int sys_nerr;
- extern char *sys_errlist[];
- char *shell_file;
- static char default_shell_file[] = SHELL_FILE;
- int len;
- int pending_execs;
- /* Set debug_fork then attach to the child while it sleeps, to debug. */
- static int debug_fork = 0;
- /* This is set to the result of setpgrp, which if vforked, will be visible
- to you in the parent process. It's only used by humans for debugging. */
- static int debug_setpgrp = 657473;
- char **save_our_env;
-
- /* The user might want tilde-expansion, and in general probably wants
- the program to behave the same way as if run from
- his/her favorite shell. So we let the shell run it for us.
- FIXME, this should probably search the local environment (as
- modified by the setenv command), not the env gdb inherited. */
- shell_file = getenv ("SHELL");
- if (shell_file == NULL)
- shell_file = default_shell_file;
-
- len = 5 + strlen (exec_file) + 1 + strlen (allargs) + 1 + /*slop*/ 10;
- /* If desired, concat something onto the front of ALLARGS.
- SHELL_COMMAND is the result. */
-#ifdef SHELL_COMMAND_CONCAT
- shell_command = (char *) alloca (strlen (SHELL_COMMAND_CONCAT) + len);
- strcpy (shell_command, SHELL_COMMAND_CONCAT);
-#else
- shell_command = (char *) alloca (len);
- shell_command[0] = '\0';
-#endif
- strcat (shell_command, "exec ");
- strcat (shell_command, exec_file);
- strcat (shell_command, " ");
- strcat (shell_command, allargs);
-
- /* exec is said to fail if the executable is open. */
- close_exec_file ();
-
- /* Retain a copy of our environment variables, since the child will
- replace the value of environ and if we're vforked, we have to
- restore it. */
- save_our_env = environ;
-
- /* Tell the terminal handling subsystem what tty we plan to run on;
- it will just record the information for later. */
-
- new_tty_prefork (inferior_io_terminal);
-
- /* It is generally good practice to flush any possible pending stdio
- output prior to doing a fork, to avoid the possibility of both the
- parent and child flushing the same data after the fork. */
-
- fflush (stdout);
- fflush (stderr);
-
-#if defined(USG) && !defined(HAVE_VFORK)
- pid = fork ();
-#else
- if (debug_fork)
- pid = fork ();
- else
- pid = vfork ();
-#endif
-
- if (pid < 0)
- perror_with_name ("vfork");
-
- if (pid == 0)
- {
- if (debug_fork)
- sleep (debug_fork);
-
-#ifdef TIOCGPGRP
- /* Run inferior in a separate process group. */
-#ifdef NEED_POSIX_SETPGID
- debug_setpgrp = setpgid (0, 0);
-#else
-#if defined(USG) && !defined(SETPGRP_ARGS)
- debug_setpgrp = setpgrp ();
-#else
- debug_setpgrp = setpgrp (getpid (), getpid ());
-#endif /* USG */
-#endif /* NEED_POSIX_SETPGID */
- if (debug_setpgrp == -1)
- perror("setpgrp failed in child");
-#endif /* TIOCGPGRP */
-
-#ifdef SET_STACK_LIMIT_HUGE
- /* Reset the stack limit back to what it was. */
- {
- struct rlimit rlim;
-
- getrlimit (RLIMIT_STACK, &rlim);
- rlim.rlim_cur = original_stack_limit;
- setrlimit (RLIMIT_STACK, &rlim);
- }
-#endif /* SET_STACK_LIMIT_HUGE */
-
- /* Ask the tty subsystem to switch to the one we specified earlier
- (or to share the current terminal, if none was specified). */
-
- new_tty ();
-
- /* Changing the signal handlers for the inferior after
- a vfork can also change them for the superior, so we don't mess
- with signals here. See comments in
- initialize_signals for how we get the right signal handlers
- for the inferior. */
-
-#ifdef USE_PROC_FS
- proc_set_exec_trap (); /* Use SVR4 /proc interface */
-#else
- call_ptrace (0, 0, 0, 0); /* "Trace me, Dr. Memory!" */
-#endif
-
- /* There is no execlpe call, so we have to set the environment
- for our child in the global variable. If we've vforked, this
- clobbers the parent, but environ is restored a few lines down
- in the parent. By the way, yes we do need to look down the
- path to find $SHELL. Rich Pixley says so, and I agree. */
- environ = env;
- execlp (shell_file, shell_file, "-c", shell_command, (char *)0);
-
- fprintf (stderr, "Cannot exec %s: %s.\n", shell_file,
- errno < sys_nerr ? sys_errlist[errno] : "unknown error");
- fflush (stderr);
- _exit (0177);
- }
-
- /* Restore our environment in case a vforked child clob'd it. */
- environ = save_our_env;
-
- /* Now that we have a child process, make it our target. */
- push_target (&child_ops);
-
-#ifdef CREATE_INFERIOR_HOOK
- CREATE_INFERIOR_HOOK (pid);
-#endif
-
-/* The process was started by the fork that created it,
- but it will have stopped one instruction after execing the shell.
- Here we must get it up to actual execution of the real program. */
-
- inferior_pid = pid; /* Needed for wait_for_inferior stuff below */
-
- clear_proceed_status ();
-
- /* We will get a trace trap after one instruction.
- Continue it automatically. Eventually (after shell does an exec)
- it will get another trace trap. Then insert breakpoints and continue. */
-
-#ifdef START_INFERIOR_TRAPS_EXPECTED
- pending_execs = START_INFERIOR_TRAPS_EXPECTED;
-#else
- pending_execs = 2;
-#endif
-
- init_wait_for_inferior ();
-
- /* Set up the "saved terminal modes" of the inferior
- based on what modes we are starting it with. */
- target_terminal_init ();
-
- /* Install inferior's terminal modes. */
- target_terminal_inferior ();
-
- while (1)
- {
- stop_soon_quietly = 1; /* Make wait_for_inferior be quiet */
- wait_for_inferior ();
- if (stop_signal != SIGTRAP)
- {
- /* Let shell child handle its own signals in its own way */
- /* FIXME, what if child has exit()ed? Must exit loop somehow */
- resume (0, stop_signal);
- }
- else
- {
- /* We handle SIGTRAP, however; it means child did an exec. */
- if (0 == --pending_execs)
- break;
- resume (0, 0); /* Just make it go on */
- }
- }
- stop_soon_quietly = 0;
-
- /* We are now in the child process of interest, having exec'd the
- correct program, and are poised at the first instruction of the
- new program. */
-#ifdef SOLIB_CREATE_INFERIOR_HOOK
- SOLIB_CREATE_INFERIOR_HOOK (pid);
-#endif
-
- /* Should this perhaps just be a "proceed" call? FIXME */
- insert_step_breakpoint ();
- breakpoints_failed = insert_breakpoints ();
- if (!breakpoints_failed)
- {
- breakpoints_inserted = 1;
- target_terminal_inferior();
- /* Start the child program going on its first instruction, single-
- stepping if we need to. */
- resume (bpstat_should_step (), 0);
- wait_for_inferior ();
- normal_stop ();
- }
-}
-
/* Start remote-debugging of a machine over a serial link. */
void
start_remote ()
{
+ init_thread_list ();
init_wait_for_inferior ();
- clear_proceed_status ();
stop_soon_quietly = 1;
trap_expected = 0;
wait_for_inferior ();
{
/* These are meaningless until the first time through wait_for_inferior. */
prev_pc = 0;
- prev_sp = 0;
prev_func_start = 0;
prev_func_name = NULL;
+#ifdef HP_OS_BUG
trap_expected_after_continue = 0;
+#endif
breakpoints_inserted = 0;
- mark_breakpoints_out ();
- stop_signal = 0; /* Don't confuse first call to proceed(). */
-}
+ breakpoint_init_inferior (inf_starting);
+ /* Don't confuse first call to proceed(). */
+ stop_signal = TARGET_SIGNAL_0;
-/* Attach to process PID, then initialize for debugging it
- and wait for the trace-trap that results from attaching. */
+ /* The first resume is not following a fork/vfork/exec. */
+ pending_follow.kind = TARGET_WAITKIND_SPURIOUS; /* I.e., none. */
+ pending_follow.fork_event.saw_parent_fork = 0;
+ pending_follow.fork_event.saw_child_fork = 0;
+ pending_follow.fork_event.saw_child_exec = 0;
-void
-child_attach (args, from_tty)
- char *args;
- int from_tty;
-{
- char *exec_file;
- int pid;
-
- dont_repeat();
-
- if (!args)
- error_no_arg ("process-id to attach");
-
-#ifndef ATTACH_DETACH
- error ("Can't attach to a process on this machine.");
-#else
- pid = atoi (args);
-
- if (target_has_execution)
- {
- if (query ("A program is being debugged already. Kill it? "))
- target_kill ();
- else
- error ("Inferior not killed.");
- }
+ /* See wait_for_inferior's handling of SYSCALL_ENTRY/RETURN events. */
+ number_of_threads_in_syscalls = 0;
- exec_file = (char *) get_exec_file (1);
+ clear_proceed_status ();
+}
- if (from_tty)
+static void
+delete_breakpoint_current_contents (arg)
+ PTR arg;
+{
+ struct breakpoint **breakpointp = (struct breakpoint **)arg;
+ if (*breakpointp != NULL)
{
- printf ("Attaching program: %s pid %d\n",
- exec_file, pid);
- fflush (stdout);
+ delete_breakpoint (*breakpointp);
+ *breakpointp = NULL;
}
-
- attach (pid);
- inferior_pid = pid;
- push_target (&child_ops);
-
- mark_breakpoints_out ();
- target_terminal_init ();
- clear_proceed_status ();
- stop_soon_quietly = 1;
- /*proceed (-1, 0, -2);*/
- target_terminal_inferior ();
- wait_for_inferior ();
-#ifdef SOLIB_ADD
- SOLIB_ADD ((char *)0, from_tty, (struct target_ops *)0);
-#endif
- normal_stop ();
-#endif /* ATTACH_DETACH */
}
\f
/* Wait for control to return from inferior to debugger.
void
wait_for_inferior ()
{
- WAITTYPE w;
+ struct cleanup *old_cleanups;
+ struct target_waitstatus w;
int another_trap;
- int random_signal;
- CORE_ADDR stop_sp;
+ int random_signal = 0;
CORE_ADDR stop_func_start;
+ CORE_ADDR stop_func_end;
char *stop_func_name;
- CORE_ADDR prologue_pc, tmp;
- int stop_step_resume_break;
+#if 0
+ CORE_ADDR prologue_pc = 0;
+#endif
+ CORE_ADDR tmp;
struct symtab_and_line sal;
int remove_breakpoints_on_following_step = 0;
int current_line;
+ struct symtab *current_symtab;
int handling_longjmp = 0; /* FIXME */
-
+ int pid;
+ int saved_inferior_pid;
+ int update_step_sp = 0;
+ int stepping_through_solib_after_catch = 0;
+ bpstat stepping_through_solib_catchpoints = NULL;
+ int enable_hw_watchpoints_after_wait = 0;
+ int stepping_through_sigtramp = 0;
+ int new_thread_event;
+
+#ifdef HAVE_NONSTEPPABLE_WATCHPOINT
+ int stepped_after_stopped_by_watchpoint;
+#endif
+
+ old_cleanups = make_cleanup (delete_breakpoint_current_contents,
+ &step_resume_breakpoint);
+ make_cleanup (delete_breakpoint_current_contents,
+ &through_sigtramp_breakpoint);
sal = find_pc_line(prev_pc, 0);
current_line = sal.line;
+ current_symtab = sal.symtab;
+
+ /* Are we stepping? */
+#define CURRENTLY_STEPPING() \
+ ((through_sigtramp_breakpoint == NULL \
+ && !handling_longjmp \
+ && ((step_range_end && step_resume_breakpoint == NULL) \
+ || trap_expected)) \
+ || stepping_through_solib_after_catch \
+ || bpstat_should_step ())
+
+thread_step_needed = 0;
+
+#ifdef HPUXHPPA
+ /* We'll update this if & when we switch to a new thread. */
+ switched_from_inferior_pid = inferior_pid;
+#endif
while (1)
{
- /* Clean up saved state that will become invalid. */
- pc_changed = 0;
- flush_cached_frames ();
+ extern int overlay_cache_invalid; /* declared in symfile.h */
+
+ overlay_cache_invalid = 1;
+
+ /* We have to invalidate the registers BEFORE calling target_wait because
+ they can be loaded from the target while in target_wait. This makes
+ remote debugging a bit more efficient for those targets that provide
+ critical registers as part of their normal status mechanism. */
+
registers_changed ();
- target_wait (&w);
+ if (target_wait_hook)
+ pid = target_wait_hook (-1, &w);
+ else
+ pid = target_wait (-1, &w);
+
+ /* Since we've done a wait, we have a new event. Don't carry
+ over any expectations about needing to step over a
+ breakpoint. */
+ thread_step_needed = 0;
+
+ /* See comments where a TARGET_WAITKIND_SYSCALL_RETURN event is
+ serviced in this loop, below. */
+ if (enable_hw_watchpoints_after_wait)
+ {
+ TARGET_ENABLE_HW_WATCHPOINTS(inferior_pid);
+ enable_hw_watchpoints_after_wait = 0;
+ }
+
+
+#ifdef HAVE_NONSTEPPABLE_WATCHPOINT
+stepped_after_stopped_by_watchpoint = 0;
+#endif
+
+ /* Gross.
+
+ We goto this label from elsewhere in wait_for_inferior when we want
+ to continue the main loop without calling "wait" and trashing the
+ waitstatus contained in W. */
+ have_waited:
+
+ flush_cached_frames ();
+
+ /* If it's a new process, add it to the thread database */
- /* See if the process still exists; clean up if it doesn't. */
- if (WIFEXITED (w))
+ new_thread_event = ((pid != inferior_pid) && !in_thread_list (pid));
+
+ if (w.kind != TARGET_WAITKIND_EXITED
+ && w.kind != TARGET_WAITKIND_SIGNALLED
+ && new_thread_event)
{
+ add_thread (pid);
+
+
+#ifdef HPUXHPPA
+ fprintf_unfiltered (gdb_stderr, "[New %s]\n", target_pid_or_tid_to_str (pid));
+
+#else
+ printf_filtered ("[New %s]\n", target_pid_to_str (pid));
+#endif
+
+#if 0
+ /* We may want to consider not doing a resume here in order to give
+ the user a chance to play with the new thread. It might be good
+ to make that a user-settable option. */
+
+ /* At this point, all threads are stopped (happens automatically in
+ either the OS or the native code). Therefore we need to continue
+ all threads in order to make progress. */
+
+ target_resume (-1, 0, TARGET_SIGNAL_0);
+ continue;
+#endif
+ }
+
+ switch (w.kind)
+ {
+ case TARGET_WAITKIND_LOADED:
+ /* Ignore gracefully during startup of the inferior, as it
+ might be the shell which has just loaded some objects,
+ otherwise add the symbols for the newly loaded objects. */
+#ifdef SOLIB_ADD
+ if (!stop_soon_quietly)
+ {
+ extern int auto_solib_add;
+
+ /* Remove breakpoints, SOLIB_ADD might adjust
+ breakpoint addresses via breakpoint_re_set. */
+ if (breakpoints_inserted)
+ remove_breakpoints ();
+
+ /* Check for any newly added shared libraries if we're
+ supposed to be adding them automatically. */
+ if (auto_solib_add)
+ {
+ /* Switch terminal for any messages produced by
+ breakpoint_re_set. */
+ target_terminal_ours_for_output ();
+ SOLIB_ADD (NULL, 0, NULL);
+ target_terminal_inferior ();
+ }
+
+ /* Reinsert breakpoints and continue. */
+ if (breakpoints_inserted)
+ insert_breakpoints ();
+ }
+#endif
+ resume (0, TARGET_SIGNAL_0);
+ continue;
+
+ case TARGET_WAITKIND_SPURIOUS:
+ resume (0, TARGET_SIGNAL_0);
+ continue;
+
+ case TARGET_WAITKIND_EXITED:
target_terminal_ours (); /* Must do this before mourn anyway */
- if (WEXITSTATUS (w))
- printf ("\nProgram exited with code 0%o.\n",
- (unsigned int)WEXITSTATUS (w));
+ annotate_exited (w.value.integer);
+ if (w.value.integer)
+ printf_filtered ("\nProgram exited with code 0%o.\n",
+ (unsigned int)w.value.integer);
else
- if (!batch_mode())
- printf ("\nProgram exited normally.\n");
- fflush (stdout);
+ printf_filtered ("\nProgram exited normally.\n");
+
+ /* Record the exit code in the convenience variable $_exitcode, so
+ that the user can inspect this again later. */
+ set_internalvar (lookup_internalvar ("_exitcode"),
+ value_from_longest (builtin_type_int,
+ (LONGEST) w.value.integer));
+ gdb_flush (gdb_stdout);
target_mourn_inferior ();
-#ifdef NO_SINGLE_STEP
- one_stepped = 0;
-#endif
+ singlestep_breakpoints_inserted_p = 0; /*SOFTWARE_SINGLE_STEP_P*/
stop_print_frame = 0;
- break;
- }
- else if (!WIFSTOPPED (w))
- {
+ goto stop_stepping;
+
+ case TARGET_WAITKIND_SIGNALLED:
stop_print_frame = 0;
- stop_signal = WTERMSIG (w);
+ stop_signal = w.value.sig;
target_terminal_ours (); /* Must do this before mourn anyway */
+ annotate_signalled ();
+
+ /* This looks pretty bogus to me. Doesn't TARGET_WAITKIND_SIGNALLED
+ mean it is already dead? This has been here since GDB 2.8, so
+ perhaps it means rms didn't understand unix waitstatuses?
+ For the moment I'm just kludging around this in remote.c
+ rather than trying to change it here --kingdon, 5 Dec 1994. */
target_kill (); /* kill mourns as well */
-#ifdef PRINT_RANDOM_SIGNAL
- printf ("\nProgram terminated: ");
- PRINT_RANDOM_SIGNAL (stop_signal);
-#else
- printf ("\nProgram terminated with signal %d, %s\n",
- stop_signal,
- stop_signal < NSIG
- ? sys_siglist[stop_signal]
- : "(undocumented)");
+
+ printf_filtered ("\nProgram terminated with signal ");
+ annotate_signal_name ();
+ printf_filtered ("%s", target_signal_to_name (stop_signal));
+ annotate_signal_name_end ();
+ printf_filtered (", ");
+ annotate_signal_string ();
+ printf_filtered ("%s", target_signal_to_string (stop_signal));
+ annotate_signal_string_end ();
+ printf_filtered (".\n");
+
+ printf_filtered ("The program no longer exists.\n");
+ gdb_flush (gdb_stdout);
+ singlestep_breakpoints_inserted_p = 0; /*SOFTWARE_SINGLE_STEP_P*/
+ goto stop_stepping;
+
+ /* The following are the only cases in which we keep going;
+ the above cases end in a continue or goto. */
+ case TARGET_WAITKIND_FORKED:
+ stop_signal = TARGET_SIGNAL_TRAP;
+ pending_follow.kind = w.kind;
+
+ /* Ignore fork events reported for the parent; we're only
+ interested in reacting to forks of the child. Note that
+ we expect the child's fork event to be available if we
+ waited for it now. */
+ if (inferior_pid == pid)
+ {
+ pending_follow.fork_event.saw_parent_fork = 1;
+ pending_follow.fork_event.parent_pid = pid;
+ pending_follow.fork_event.child_pid = w.value.related_pid;
+ continue;
+ }
+ else
+ {
+ pending_follow.fork_event.saw_child_fork = 1;
+ pending_follow.fork_event.child_pid = pid;
+ pending_follow.fork_event.parent_pid = w.value.related_pid;
+ }
+
+ stop_pc = read_pc_pid (pid);
+ saved_inferior_pid = inferior_pid;
+ inferior_pid = pid;
+ stop_bpstat = bpstat_stop_status (&stop_pc,
+#if DECR_PC_AFTER_BREAK
+ (prev_pc != stop_pc - DECR_PC_AFTER_BREAK
+ && CURRENTLY_STEPPING ())
+#else /* DECR_PC_AFTER_BREAK zero */
+ 0
+#endif /* DECR_PC_AFTER_BREAK zero */
+ );
+ random_signal = ! bpstat_explains_signal (stop_bpstat);
+ inferior_pid = saved_inferior_pid;
+ goto process_event_stop_test;
+
+ /* If this a platform which doesn't allow a debugger to touch a
+ vfork'd inferior until after it exec's, then we'd best keep
+ our fingers entirely off the inferior, other than continuing
+ it. This has the unfortunate side-effect that catchpoints
+ of vforks will be ignored. But since the platform doesn't
+ allow the inferior be touched at vfork time, there's really
+ little choice. */
+ case TARGET_WAITKIND_VFORKED:
+ stop_signal = TARGET_SIGNAL_TRAP;
+ pending_follow.kind = w.kind;
+
+ /* Is this a vfork of the parent? If so, then give any
+ vfork catchpoints a chance to trigger now. (It's
+ dangerous to do so if the child canot be touched until
+ it execs, and the child has not yet exec'd. We probably
+ should warn the user to that effect when the catchpoint
+ triggers...) */
+ if (pid == inferior_pid)
+ {
+ pending_follow.fork_event.saw_parent_fork = 1;
+ pending_follow.fork_event.parent_pid = pid;
+ pending_follow.fork_event.child_pid = w.value.related_pid;
+ }
+
+ /* If we've seen the child's vfork event but cannot really touch
+ the child until it execs, then we must continue the child now.
+ Else, give any vfork catchpoints a chance to trigger now. */
+ else
+ {
+ pending_follow.fork_event.saw_child_fork = 1;
+ pending_follow.fork_event.child_pid = pid;
+ pending_follow.fork_event.parent_pid = w.value.related_pid;
+ target_post_startup_inferior (pending_follow.fork_event.child_pid);
+ follow_vfork_when_exec = ! target_can_follow_vfork_prior_to_exec ();
+ if (follow_vfork_when_exec)
+ {
+ target_resume (pid, 0, TARGET_SIGNAL_0);
+ continue;
+ }
+ }
+
+ stop_pc = read_pc ();
+ stop_bpstat = bpstat_stop_status (&stop_pc,
+#if DECR_PC_AFTER_BREAK
+ (prev_pc != stop_pc - DECR_PC_AFTER_BREAK
+ && CURRENTLY_STEPPING ())
+#else /* DECR_PC_AFTER_BREAK zero */
+ 0
+#endif /* DECR_PC_AFTER_BREAK zero */
+ );
+ random_signal = ! bpstat_explains_signal (stop_bpstat);
+ goto process_event_stop_test;
+
+ case TARGET_WAITKIND_EXECD:
+ stop_signal = TARGET_SIGNAL_TRAP;
+
+ /* Is this a target which reports multiple exec events per actual
+ call to exec()? (HP-UX using ptrace does, for example.) If so,
+ ignore all but the last one. Just resume the exec'r, and wait
+ for the next exec event. */
+ if (inferior_ignoring_leading_exec_events)
+ {
+ inferior_ignoring_leading_exec_events--;
+ if (pending_follow.kind == TARGET_WAITKIND_VFORKED)
+ ENSURE_VFORKING_PARENT_REMAINS_STOPPED(pending_follow.fork_event.parent_pid);
+ target_resume (pid, 0, TARGET_SIGNAL_0);
+ continue;
+ }
+ inferior_ignoring_leading_exec_events =
+ target_reported_exec_events_per_exec_call () - 1;
+
+ pending_follow.execd_pathname = savestring (w.value.execd_pathname,
+ strlen (w.value.execd_pathname));
+
+ /* Did inferior_pid exec, or did a (possibly not-yet-followed)
+ child of a vfork exec?
+
+ ??rehrauer: This is unabashedly an HP-UX specific thing. On
+ HP-UX, events associated with a vforking inferior come in
+ threes: a vfork event for the child (always first), followed
+ a vfork event for the parent and an exec event for the child.
+ The latter two can come in either order.
+
+ If we get the parent vfork event first, life's good: We follow
+ either the parent or child, and then the child's exec event is
+ a "don't care".
+
+ But if we get the child's exec event first, then we delay
+ responding to it until we handle the parent's vfork. Because,
+ otherwise we can't satisfy a "catch vfork". */
+ if (pending_follow.kind == TARGET_WAITKIND_VFORKED)
+ {
+ pending_follow.fork_event.saw_child_exec = 1;
+
+ /* On some targets, the child must be resumed before
+ the parent vfork event is delivered. A single-step
+ suffices. */
+ if (RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK())
+ target_resume (pid, 1, TARGET_SIGNAL_0);
+ continue; /* We expect the parent vfork event to be available now. */
+ }
+
+ /* This causes the eventpoints and symbol table to be reset. Must
+ do this now, before trying to determine whether to stop. */
+ follow_exec (inferior_pid, pending_follow.execd_pathname);
+ free (pending_follow.execd_pathname);
+
+ stop_pc = read_pc_pid (pid);
+ saved_inferior_pid = inferior_pid;
+ inferior_pid = pid;
+ stop_bpstat = bpstat_stop_status (&stop_pc,
+#if DECR_PC_AFTER_BREAK
+ (prev_pc != stop_pc - DECR_PC_AFTER_BREAK
+ && CURRENTLY_STEPPING ())
+#else /* DECR_PC_AFTER_BREAK zero */
+ 0
+#endif /* DECR_PC_AFTER_BREAK zero */
+ );
+ random_signal = ! bpstat_explains_signal (stop_bpstat);
+ inferior_pid = saved_inferior_pid;
+ goto process_event_stop_test;
+
+ /* These syscall events are returned on HP-UX, as part of its
+ implementation of page-protection-based "hardware" watchpoints.
+ HP-UX has unfortunate interactions between page-protections and
+ some system calls. Our solution is to disable hardware watches
+ when a system call is entered, and reenable them when the syscall
+ completes. The downside of this is that we may miss the precise
+ point at which a watched piece of memory is modified. "Oh well."
+
+ Note that we may have multiple threads running, which may each
+ enter syscalls at roughly the same time. Since we don't have a
+ good notion currently of whether a watched piece of memory is
+ thread-private, we'd best not have any page-protections active
+ when any thread is in a syscall. Thus, we only want to reenable
+ hardware watches when no threads are in a syscall.
+
+ Also, be careful not to try to gather much state about a thread
+ that's in a syscall. It's frequently a losing proposition. */
+ case TARGET_WAITKIND_SYSCALL_ENTRY:
+ number_of_threads_in_syscalls++;
+ if (number_of_threads_in_syscalls == 1)
+ {
+ TARGET_DISABLE_HW_WATCHPOINTS(inferior_pid);
+ }
+ resume (0, TARGET_SIGNAL_0);
+ continue;
+
+ /* Before examining the threads further, step this thread to
+ get it entirely out of the syscall. (We get notice of the
+ event when the thread is just on the verge of exiting a
+ syscall. Stepping one instruction seems to get it back
+ into user code.)
+
+ Note that although the logical place to reenable h/w watches
+ is here, we cannot. We cannot reenable them before stepping
+ the thread (this causes the next wait on the thread to hang).
+
+ Nor can we enable them after stepping until we've done a
+ wait. Thus, we simply set the flag enable_hw_watchpoints_after_wait
+ here, which will be serviced immediately after the target
+ is waited on. */
+ case TARGET_WAITKIND_SYSCALL_RETURN:
+ target_resume (pid, 1, TARGET_SIGNAL_0);
+
+ if (number_of_threads_in_syscalls > 0)
+ {
+ number_of_threads_in_syscalls--;
+ enable_hw_watchpoints_after_wait =
+ (number_of_threads_in_syscalls == 0);
+ }
+ continue;
+
+ case TARGET_WAITKIND_STOPPED:
+ stop_signal = w.value.sig;
+ break;
+ }
+
+ /* We may want to consider not doing a resume here in order to give
+ the user a chance to play with the new thread. It might be good
+ to make that a user-settable option. */
+
+ /* At this point, all threads are stopped (happens automatically in
+ either the OS or the native code). Therefore we need to continue
+ all threads in order to make progress. */
+ if (new_thread_event)
+ {
+ target_resume (-1, 0, TARGET_SIGNAL_0);
+ continue;
+ }
+
+ stop_pc = read_pc_pid (pid);
+
+ /* See if a thread hit a thread-specific breakpoint that was meant for
+ another thread. If so, then step that thread past the breakpoint,
+ and continue it. */
+
+ if (stop_signal == TARGET_SIGNAL_TRAP)
+ {
+ if (SOFTWARE_SINGLE_STEP_P && singlestep_breakpoints_inserted_p)
+ random_signal = 0;
+ else
+ if (breakpoints_inserted
+ && breakpoint_here_p (stop_pc - DECR_PC_AFTER_BREAK))
+ {
+ random_signal = 0;
+ if (!breakpoint_thread_match (stop_pc - DECR_PC_AFTER_BREAK, pid))
+ {
+ int remove_status;
+
+ /* Saw a breakpoint, but it was hit by the wrong thread. Just continue. */
+ write_pc_pid (stop_pc - DECR_PC_AFTER_BREAK, pid);
+
+ remove_status = remove_breakpoints ();
+ /* Did we fail to remove breakpoints? If so, try to set the
+ PC past the bp. (There's at least one situation in which
+ we can fail to remove the bp's: On HP-UX's that use ttrace,
+ we can't change the address space of a vforking child process
+ until the child exits (well, okay, not then either :-) or
+ execs. */
+ if (remove_status != 0)
+ {
+ write_pc_pid (stop_pc - DECR_PC_AFTER_BREAK + 4, pid);
+ }
+ else
+ {
+ target_resume (pid, 1, TARGET_SIGNAL_0); /* Single step */
+ /* FIXME: What if a signal arrives instead of the single-step
+ happening? */
+
+ if (target_wait_hook)
+ target_wait_hook (pid, &w);
+ else
+ target_wait (pid, &w);
+ insert_breakpoints ();
+ }
+
+ /* We need to restart all the threads now. */
+ target_resume (-1, 0, TARGET_SIGNAL_0);
+ continue;
+ }
+ else
+ {
+ /* This breakpoint matches--either it is the right
+ thread or it's a generic breakpoint for all threads.
+ Remember that we'll need to step just _this_ thread
+ on any following user continuation! */
+ thread_step_needed = 1;
+ }
+ }
+ }
+ else
+ random_signal = 1;
+
+ /* See if something interesting happened to the non-current thread. If
+ so, then switch to that thread, and eventually give control back to
+ the user.
+
+ Note that if there's any kind of pending follow (i.e., of a fork,
+ vfork or exec), we don't want to do this now. Rather, we'll let
+ the next resume handle it. */
+ if ((pid != inferior_pid) &&
+ (pending_follow.kind == TARGET_WAITKIND_SPURIOUS))
+ {
+ int printed = 0;
+
+ /* If it's a random signal for a non-current thread, notify user
+ if he's expressed an interest. */
+ if (random_signal
+ && signal_print[stop_signal])
+ {
+/* ??rehrauer: I don't understand the rationale for this code. If the
+ inferior will stop as a result of this signal, then the act of handling
+ the stop ought to print a message that's couches the stoppage in user
+ terms, e.g., "Stopped for breakpoint/watchpoint". If the inferior
+ won't stop as a result of the signal -- i.e., if the signal is merely
+ a side-effect of something GDB's doing "under the covers" for the
+ user, such as stepping threads over a breakpoint they shouldn't stop
+ for -- then the message seems to be a serious annoyance at best.
+
+ For now, remove the message altogether. */
+#if 0
+ printed = 1;
+ target_terminal_ours_for_output ();
+ printf_filtered ("\nProgram received signal %s, %s.\n",
+ target_signal_to_name (stop_signal),
+ target_signal_to_string (stop_signal));
+ gdb_flush (gdb_stdout);
#endif
- printf ("The inferior process no longer exists.\n");
- fflush (stdout);
-#ifdef NO_SINGLE_STEP
- one_stepped = 0;
+ }
+
+ /* If it's not SIGTRAP and not a signal we want to stop for, then
+ continue the thread. */
+
+ if (stop_signal != TARGET_SIGNAL_TRAP
+ && !signal_stop[stop_signal])
+ {
+ if (printed)
+ target_terminal_inferior ();
+
+ /* Clear the signal if it should not be passed. */
+ if (signal_program[stop_signal] == 0)
+ stop_signal = TARGET_SIGNAL_0;
+
+ target_resume (pid, 0, stop_signal);
+ continue;
+ }
+
+ /* It's a SIGTRAP or a signal we're interested in. Switch threads,
+ and fall into the rest of wait_for_inferior(). */
+
+ /* Save infrun state for the old thread. */
+ save_infrun_state (inferior_pid, prev_pc,
+ prev_func_start, prev_func_name,
+ trap_expected, step_resume_breakpoint,
+ through_sigtramp_breakpoint,
+ step_range_start, step_range_end,
+ step_frame_address, handling_longjmp,
+ another_trap,
+ stepping_through_solib_after_catch,
+ stepping_through_solib_catchpoints,
+ stepping_through_sigtramp);
+
+#ifdef HPUXHPPA
+ switched_from_inferior_pid = inferior_pid;
#endif
- break;
+
+ inferior_pid = pid;
+
+ /* Load infrun state for the new thread. */
+ load_infrun_state (inferior_pid, &prev_pc,
+ &prev_func_start, &prev_func_name,
+ &trap_expected, &step_resume_breakpoint,
+ &through_sigtramp_breakpoint,
+ &step_range_start, &step_range_end,
+ &step_frame_address, &handling_longjmp,
+ &another_trap,
+ &stepping_through_solib_after_catch,
+ &stepping_through_solib_catchpoints,
+ &stepping_through_sigtramp);
+
+ if (context_hook)
+ context_hook (pid_to_thread_id (pid));
+
+ printf_filtered ("[Switching to %s]\n", target_pid_to_str (pid));
+ flush_cached_frames ();
+ }
+
+ if (SOFTWARE_SINGLE_STEP_P && singlestep_breakpoints_inserted_p)
+ {
+ /* Pull the single step breakpoints out of the target. */
+ SOFTWARE_SINGLE_STEP (0, 0);
+ singlestep_breakpoints_inserted_p = 0;
}
-#ifdef NO_SINGLE_STEP
- if (one_stepped)
- single_step (0); /* This actually cleans up the ss */
-#endif /* NO_SINGLE_STEP */
-
- stop_pc = read_pc ();
- set_current_frame ( create_new_frame (read_register (FP_REGNUM),
- read_pc ()));
-
- stop_frame_address = FRAME_FP (get_current_frame ());
- stop_sp = read_register (SP_REGNUM);
+ /* If PC is pointing at a nullified instruction, then step beyond
+ it so that the user won't be confused when GDB appears to be ready
+ to execute it. */
+
+#if 0 /* XXX DEBUG */
+ printf ("infrun.c:1607: pc = 0x%x\n", read_pc ());
+#endif
+ /* if (INSTRUCTION_NULLIFIED && CURRENTLY_STEPPING ()) */
+ if (INSTRUCTION_NULLIFIED)
+ {
+ struct target_waitstatus tmpstatus;
+#if 0
+ all_registers_info ((char *)0, 0);
+#endif
+ registers_changed ();
+ target_resume (pid, 1, TARGET_SIGNAL_0);
+
+ /* We may have received a signal that we want to pass to
+ the inferior; therefore, we must not clobber the waitstatus
+ in W. So we call wait ourselves, then continue the loop
+ at the "have_waited" label. */
+ if (target_wait_hook)
+ target_wait_hook (pid, &tmpstatus);
+ else
+ target_wait (pid, &tmpstatus);
+
+ goto have_waited;
+ }
+
+#ifdef HAVE_STEPPABLE_WATCHPOINT
+ /* It may not be necessary to disable the watchpoint to stop over
+ it. For example, the PA can (with some kernel cooperation)
+ single step over a watchpoint without disabling the watchpoint. */
+ if (STOPPED_BY_WATCHPOINT (w))
+ {
+ resume (1, 0);
+ continue;
+ }
+#endif
+
+#ifdef HAVE_NONSTEPPABLE_WATCHPOINT
+ /* It is far more common to need to disable a watchpoint
+ to step the inferior over it. FIXME. What else might
+ a debug register or page protection watchpoint scheme need
+ here? */
+ if (STOPPED_BY_WATCHPOINT (w))
+ {
+/* At this point, we are stopped at an instruction which has attempted to write
+ to a piece of memory under control of a watchpoint. The instruction hasn't
+ actually executed yet. If we were to evaluate the watchpoint expression
+ now, we would get the old value, and therefore no change would seem to have
+ occurred.
+
+ In order to make watchpoints work `right', we really need to complete the
+ memory write, and then evaluate the watchpoint expression. The following
+ code does that by removing the watchpoint (actually, all watchpoints and
+ breakpoints), single-stepping the target, re-inserting watchpoints, and then
+ falling through to let normal single-step processing handle proceed. Since
+ this includes evaluating watchpoints, things will come to a stop in the
+ correct manner. */
+
+ write_pc (stop_pc - DECR_PC_AFTER_BREAK);
+
+ remove_breakpoints ();
+ registers_changed();
+ target_resume (pid, 1, TARGET_SIGNAL_0); /* Single step */
+
+ if (target_wait_hook)
+ target_wait_hook (pid, &w);
+ else
+ target_wait (pid, &w);
+ insert_breakpoints ();
+
+ /* FIXME-maybe: is this cleaner than setting a flag? Does it
+ handle things like signals arriving and other things happening
+ in combination correctly? */
+ stepped_after_stopped_by_watchpoint = 1;
+ goto have_waited;
+ }
+#endif
+
+#ifdef HAVE_CONTINUABLE_WATCHPOINT
+ /* It may be possible to simply continue after a watchpoint. */
+ STOPPED_BY_WATCHPOINT (w);
+#endif
+
stop_func_start = 0;
+ stop_func_end = 0;
stop_func_name = 0;
/* Don't care about return value; stop_func_start and stop_func_name
will both be 0 if it doesn't work. */
- (void) find_pc_partial_function (stop_pc, &stop_func_name,
- &stop_func_start);
+ find_pc_partial_function (stop_pc, &stop_func_name, &stop_func_start,
+ &stop_func_end);
stop_func_start += FUNCTION_START_OFFSET;
another_trap = 0;
bpstat_clear (&stop_bpstat);
stop_step = 0;
stop_stack_dummy = 0;
stop_print_frame = 1;
- stop_step_resume_break = 0;
random_signal = 0;
stopped_by_random_signal = 0;
breakpoints_failed = 0;
3) set random_signal to 1, and the decision between 1 and 2
will be made according to the signal handling tables. */
- stop_signal = WSTOPSIG (w);
-
/* First, distinguish signals caused by the debugger from signals
that have to do with the program's own actions.
Note that breakpoint insns may cause SIGTRAP or SIGILL
Here we detect when a SIGILL or SIGEMT is really a breakpoint
and change it to SIGTRAP. */
- if (stop_signal == SIGTRAP
+ if (stop_signal == TARGET_SIGNAL_TRAP
|| (breakpoints_inserted &&
- (stop_signal == SIGILL
- || stop_signal == SIGEMT))
+ (stop_signal == TARGET_SIGNAL_ILL
+ || stop_signal == TARGET_SIGNAL_EMT
+ ))
|| stop_soon_quietly)
{
- if (stop_signal == SIGTRAP && stop_after_trap)
+ if (stop_signal == TARGET_SIGNAL_TRAP && stop_after_trap)
{
stop_print_frame = 0;
break;
if just proceeded over a breakpoint.
However, if we are trying to proceed over a breakpoint
- and end up in sigtramp, then step_resume_break_address
+ and end up in sigtramp, then through_sigtramp_breakpoint
will be set and we should check whether we've hit the
step breakpoint. */
- if (stop_signal == SIGTRAP && trap_expected
- && step_resume_break_address == 0)
+ if (stop_signal == TARGET_SIGNAL_TRAP && trap_expected
+ && through_sigtramp_breakpoint == NULL)
bpstat_clear (&stop_bpstat);
else
{
/* See if there is a breakpoint at the current PC. */
-#if DECR_PC_AFTER_BREAK
- /* Notice the case of stepping through a jump
- that lands just after a breakpoint.
- Don't confuse that with hitting the breakpoint.
- What we check for is that 1) stepping is going on
- and 2) the pc before the last insn does not match
- the address of the breakpoint before the current pc. */
- if (prev_pc == stop_pc - DECR_PC_AFTER_BREAK
- || !step_range_end
- || step_resume_break_address
- || handling_longjmp /* FIXME */)
-#endif /* DECR_PC_AFTER_BREAK not zero */
- {
- /* See if we stopped at the special breakpoint for
- stepping over a subroutine call. If both are zero,
- this wasn't the reason for the stop. */
- if (step_resume_break_address
- && stop_pc - DECR_PC_AFTER_BREAK
- == step_resume_break_address)
- {
- stop_step_resume_break = 1;
- if (DECR_PC_AFTER_BREAK)
- {
- stop_pc -= DECR_PC_AFTER_BREAK;
- write_register (PC_REGNUM, stop_pc);
- pc_changed = 0;
- }
- }
- else
- {
- stop_bpstat =
- bpstat_stop_status (&stop_pc, stop_frame_address);
- /* Following in case break condition called a
- function. */
- stop_print_frame = 1;
- }
- }
+ stop_bpstat = bpstat_stop_status
+ (&stop_pc,
+ (DECR_PC_AFTER_BREAK ?
+ /* Notice the case of stepping through a jump
+ that lands just after a breakpoint.
+ Don't confuse that with hitting the breakpoint.
+ What we check for is that 1) stepping is going on
+ and 2) the pc before the last insn does not match
+ the address of the breakpoint before the current pc
+ and 3) we didn't hit a breakpoint in a signal handler
+ without an intervening stop in sigtramp, which is
+ detected by a new stack pointer value below
+ any usual function calling stack adjustments. */
+ (CURRENTLY_STEPPING ()
+ && prev_pc != stop_pc - DECR_PC_AFTER_BREAK
+ && !(step_range_end
+ && INNER_THAN (read_sp (), (step_sp - 16)))) :
+ 0)
+ );
+ /* Following in case break condition called a
+ function. */
+ stop_print_frame = 1;
}
-
- if (stop_signal == SIGTRAP)
+
+ if (stop_signal == TARGET_SIGNAL_TRAP)
random_signal
= !(bpstat_explains_signal (stop_bpstat)
|| trap_expected
- || stop_step_resume_break
- || PC_IN_CALL_DUMMY (stop_pc, stop_sp, stop_frame_address)
- || (step_range_end && !step_resume_break_address));
+#ifndef CALL_DUMMY_BREAKPOINT_OFFSET
+ || PC_IN_CALL_DUMMY (stop_pc, read_sp (),
+ FRAME_FP (get_current_frame ()))
+#endif /* No CALL_DUMMY_BREAKPOINT_OFFSET. */
+ || (step_range_end && step_resume_breakpoint == NULL));
+
else
{
random_signal
= !(bpstat_explains_signal (stop_bpstat)
- || stop_step_resume_break
/* End of a stack dummy. Some systems (e.g. Sony
news) give another signal besides SIGTRAP,
so check here as well as above. */
- || PC_IN_CALL_DUMMY (stop_pc, stop_sp, stop_frame_address)
+#ifndef CALL_DUMMY_BREAKPOINT_OFFSET
+ || PC_IN_CALL_DUMMY (stop_pc, read_sp (),
+ FRAME_FP (get_current_frame ()))
+#endif /* No CALL_DUMMY_BREAKPOINT_OFFSET. */
);
if (!random_signal)
- stop_signal = SIGTRAP;
+ stop_signal = TARGET_SIGNAL_TRAP;
}
}
+
+ /* When we reach this point, we've pretty much decided
+ that the reason for stopping must've been a random
+ (unexpected) signal. */
+
else
random_signal = 1;
-
+ /* If a fork, vfork or exec event was seen, then there are two
+ possible responses we can make:
+
+ 1. If a catchpoint triggers for the event (random_signal == 0),
+ then we must stop now and issue a prompt. We will resume
+ the inferior when the user tells us to.
+ 2. If no catchpoint triggers for the event (random_signal == 1),
+ then we must resume the inferior now and keep checking.
+
+ In either case, we must take appropriate steps to "follow" the
+ the fork/vfork/exec when the inferior is resumed. For example,
+ if follow-fork-mode is "child", then we must detach from the
+ parent inferior and follow the new child inferior.
+
+ In either case, setting pending_follow causes the next resume()
+ to take the appropriate following action. */
+process_event_stop_test:
+ if (w.kind == TARGET_WAITKIND_FORKED)
+ {
+ if (random_signal) /* I.e., no catchpoint triggered for this. */
+ {
+ trap_expected = 1;
+ stop_signal = TARGET_SIGNAL_0;
+ goto keep_going;
+ }
+ }
+ else if (w.kind == TARGET_WAITKIND_VFORKED)
+ {
+ if (random_signal) /* I.e., no catchpoint triggered for this. */
+ {
+ stop_signal = TARGET_SIGNAL_0;
+ goto keep_going;
+ }
+ }
+ else if (w.kind == TARGET_WAITKIND_EXECD)
+ {
+ pending_follow.kind = w.kind;
+ if (random_signal) /* I.e., no catchpoint triggered for this. */
+ {
+ trap_expected = 1;
+ stop_signal = TARGET_SIGNAL_0;
+ goto keep_going;
+ }
+ }
+
/* For the program's own signals, act according to
the signal handling tables. */
-
+
if (random_signal)
{
/* Signal not for debugging purposes. */
stopped_by_random_signal = 1;
- if (stop_signal >= NSIG
- || signal_print[stop_signal])
+ if (signal_print[stop_signal])
{
printed = 1;
target_terminal_ours_for_output ();
-#ifdef PRINT_RANDOM_SIGNAL
- PRINT_RANDOM_SIGNAL (stop_signal);
-#else
- printf ("\nProgram received signal %d, %s\n",
- stop_signal,
- stop_signal < NSIG
- ? sys_siglist[stop_signal]
- : "(undocumented)");
-#endif /* PRINT_RANDOM_SIGNAL */
- fflush (stdout);
+ annotate_signal ();
+ printf_filtered ("\nProgram received signal ");
+ annotate_signal_name ();
+ printf_filtered ("%s", target_signal_to_name (stop_signal));
+ annotate_signal_name_end ();
+ printf_filtered (", ");
+ annotate_signal_string ();
+ printf_filtered ("%s", target_signal_to_string (stop_signal));
+ annotate_signal_string_end ();
+ printf_filtered (".\n");
+ gdb_flush (gdb_stdout);
}
- if (stop_signal >= NSIG
- || signal_stop[stop_signal])
+ if (signal_stop[stop_signal])
break;
/* If not going to stop, give terminal back
if we took it away. */
else if (printed)
target_terminal_inferior ();
- /* Note that virtually all the code below does `if !random_signal'.
- Perhaps this code should end with a goto or continue. At least
- one (now fixed) bug was caused by this -- a !random_signal was
- missing in one of the tests below. */
+ /* Clear the signal if it should not be passed. */
+ if (signal_program[stop_signal] == 0)
+ stop_signal = TARGET_SIGNAL_0;
+
+ /* If we're in the middle of a "next" command, let the code for
+ stepping over a function handle this. pai/1997-09-10
+
+ A previous comment here suggested it was possible to change
+ this to jump to keep_going in all cases. */
+
+ if (step_over_calls > 0)
+ goto step_over_function;
+ else
+ goto check_sigtramp2;
}
/* Handle cases caused by hitting a breakpoint. */
+ {
+ CORE_ADDR jmp_buf_pc;
+ struct bpstat_what what;
- if (!random_signal)
- if (bpstat_explains_signal (stop_bpstat))
+ what = bpstat_what (stop_bpstat);
+
+ if (what.call_dummy)
{
- CORE_ADDR jmp_buf_pc;
+ stop_stack_dummy = 1;
+#ifdef HP_OS_BUG
+ trap_expected_after_continue = 1;
+#endif
+ }
- switch (stop_bpstat->breakpoint_at->type) /* FIXME */
+ switch (what.main_action)
+ {
+ case BPSTAT_WHAT_SET_LONGJMP_RESUME:
+ /* If we hit the breakpoint at longjmp, disable it for the
+ duration of this command. Then, install a temporary
+ breakpoint at the target of the jmp_buf. */
+ disable_longjmp_breakpoint();
+ remove_breakpoints ();
+ breakpoints_inserted = 0;
+ if (!GET_LONGJMP_TARGET(&jmp_buf_pc)) goto keep_going;
+
+ /* Need to blow away step-resume breakpoint, as it
+ interferes with us */
+ if (step_resume_breakpoint != NULL)
{
- /* If we hit the breakpoint at longjmp, disable it for the
- duration of this command. Then, install a temporary
- breakpoint at the target of the jmp_buf. */
- case bp_longjmp:
- disable_longjmp_breakpoint();
- remove_breakpoints ();
- breakpoints_inserted = 0;
- if (!GET_LONGJMP_TARGET(&jmp_buf_pc)) goto keep_going;
-
- /* Need to blow away step-resume breakpoint, as it
- interferes with us */
- remove_step_breakpoint ();
- step_resume_break_address = 0;
- stop_step_resume_break = 0;
-
-#if 0 /* FIXME - Need to implement nested temporary breakpoints */
- if (step_over_calls > 0)
- set_longjmp_resume_breakpoint(jmp_buf_pc,
- get_current_frame());
- else
+ delete_breakpoint (step_resume_breakpoint);
+ step_resume_breakpoint = NULL;
+ }
+ /* Not sure whether we need to blow this away too, but probably
+ it is like the step-resume breakpoint. */
+ if (through_sigtramp_breakpoint != NULL)
+ {
+ delete_breakpoint (through_sigtramp_breakpoint);
+ through_sigtramp_breakpoint = NULL;
+ }
+
+#if 0
+ /* FIXME - Need to implement nested temporary breakpoints */
+ if (step_over_calls > 0)
+ set_longjmp_resume_breakpoint(jmp_buf_pc,
+ get_current_frame());
+ else
#endif /* 0 */
- set_longjmp_resume_breakpoint(jmp_buf_pc, NULL);
- handling_longjmp = 1; /* FIXME */
+ set_longjmp_resume_breakpoint(jmp_buf_pc, NULL);
+ handling_longjmp = 1; /* FIXME */
+ goto keep_going;
+
+ case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME:
+ case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE:
+ remove_breakpoints ();
+ breakpoints_inserted = 0;
+#if 0
+ /* FIXME - Need to implement nested temporary breakpoints */
+ if (step_over_calls
+ && (INNER_THAN (FRAME_FP (get_current_frame ()),
+ step_frame_address)))
+ {
+ another_trap = 1;
goto keep_going;
+ }
+#endif /* 0 */
+ disable_longjmp_breakpoint();
+ handling_longjmp = 0; /* FIXME */
+ if (what.main_action == BPSTAT_WHAT_CLEAR_LONGJMP_RESUME)
+ break;
+ /* else fallthrough */
+
+ case BPSTAT_WHAT_SINGLE:
+ if (breakpoints_inserted)
+ {
+ thread_step_needed = 1;
+ remove_breakpoints ();
+ }
+ breakpoints_inserted = 0;
+ another_trap = 1;
+ /* Still need to check other stuff, at least the case
+ where we are stepping and step out of the right range. */
+ break;
+
+ case BPSTAT_WHAT_STOP_NOISY:
+ stop_print_frame = 1;
+
+ /* We are about to nuke the step_resume_breakpoint and
+ through_sigtramp_breakpoint via the cleanup chain, so
+ no need to worry about it here. */
+
+ goto stop_stepping;
+
+ case BPSTAT_WHAT_STOP_SILENT:
+ stop_print_frame = 0;
+
+ /* We are about to nuke the step_resume_breakpoint and
+ through_sigtramp_breakpoint via the cleanup chain, so
+ no need to worry about it here. */
+
+ goto stop_stepping;
+
+ case BPSTAT_WHAT_STEP_RESUME:
+ /* This proably demands a more elegant solution, but, yeah
+ right...
+
+ This function's use of the simple variable step_resume_breakpoint
+ doesn't seem to accomodate simultaneously active step-resume bp's,
+ although the breakpoint list certainly can.
+
+ If we reach here and step_resume_breakpoint is already NULL, then
+ apparently we have multiple active step-resume bp's. We'll just
+ delete the breakpoint we stopped at, and carry on. */
+ if (step_resume_breakpoint == NULL)
+ {
+ step_resume_breakpoint =
+ bpstat_find_step_resume_breakpoint (stop_bpstat);
+ }
+ delete_breakpoint (step_resume_breakpoint);
+ step_resume_breakpoint = NULL;
+ break;
- case bp_longjmp_resume:
+ case BPSTAT_WHAT_THROUGH_SIGTRAMP:
+ if (through_sigtramp_breakpoint)
+ delete_breakpoint (through_sigtramp_breakpoint);
+ through_sigtramp_breakpoint = NULL;
+
+ /* If were waiting for a trap, hitting the step_resume_break
+ doesn't count as getting it. */
+ if (trap_expected)
+ another_trap = 1;
+ break;
+
+ case BPSTAT_WHAT_CHECK_SHLIBS:
+ case BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK:
+#ifdef SOLIB_ADD
+ {
+ extern int auto_solib_add;
+
+ /* Remove breakpoints, we eventually want to step over the
+ shlib event breakpoint, and SOLIB_ADD might adjust
+ breakpoint addresses via breakpoint_re_set. */
+ if (breakpoints_inserted)
remove_breakpoints ();
- breakpoints_inserted = 0;
-#if 0 /* FIXME - Need to implement nested temporary breakpoints */
- if (step_over_calls
- && (stop_frame_address
- INNER_THAN step_frame_address))
- {
- another_trap = 1;
- goto keep_going;
- }
-#endif /* 0 */
- disable_longjmp_breakpoint();
- handling_longjmp = 0; /* FIXME */
- break;
+ breakpoints_inserted = 0;
- default:
- fprintf(stderr, "Unknown breakpoint type %d\n",
- stop_bpstat->breakpoint_at->type);
- case bp_watchpoint:
- case bp_breakpoint:
- case bp_until:
- case bp_finish:
- /* Does a breakpoint want us to stop? */
- if (bpstat_stop (stop_bpstat))
- {
- stop_print_frame = bpstat_should_print (stop_bpstat);
- goto stop_stepping;
- }
- /* Otherwise, must remove breakpoints and single-step
- to get us past the one we hit. */
- else
- {
- remove_breakpoints ();
- remove_step_breakpoint ();
- breakpoints_inserted = 0;
- another_trap = 1;
- }
- break;
- }
- }
- else if (stop_step_resume_break)
- {
- /* But if we have hit the step-resumption breakpoint,
- remove it. It has done its job getting us here.
- The sp test is to make sure that we don't get hung
- up in recursive calls in functions without frame
- pointers. If the stack pointer isn't outside of
- where the breakpoint was set (within a routine to be
- stepped over), we're in the middle of a recursive
- call. Not true for reg window machines (sparc)
- because the must change frames to call things and
- the stack pointer doesn't have to change if it
- the bp was set in a routine without a frame (pc can
- be stored in some other window).
-
- The removal of the sp test is to allow calls to
- alloca. Nasty things were happening. Oh, well,
- gdb can only handle one level deep of lack of
- frame pointer. */
-
- /*
- Disable test for step_frame_address match so that we always stop even if the
- frames don't match. Reason: if we hit the step_resume_breakpoint, there is
- no way to temporarily disable it so that we can step past it. If we leave
- the breakpoint in, then we loop forever repeatedly hitting, but never
- getting past the breakpoint. This change keeps nexting over recursive
- function calls from hanging gdb.
- */
-#if 0
- if (* step_frame_address == 0
- || (step_frame_address == stop_frame_address))
-#endif 0
- {
- remove_step_breakpoint ();
- step_resume_break_address = 0;
+ /* Check for any newly added shared libraries if we're
+ supposed to be adding them automatically. */
+ if (auto_solib_add)
+ {
+ /* Switch terminal for any messages produced by
+ breakpoint_re_set. */
+ target_terminal_ours_for_output ();
+ SOLIB_ADD (NULL, 0, NULL);
+ target_terminal_inferior ();
+ }
+
+ /* Try to reenable shared library breakpoints, additional
+ code segments in shared libraries might be mapped in now. */
+ re_enable_breakpoints_in_shlibs ();
+
+ /* If requested, stop when the dynamic linker notifies
+ gdb of events. This allows the user to get control
+ and place breakpoints in initializer routines for
+ dynamically loaded objects (among other things). */
+ if (stop_on_solib_events)
+ {
+ stop_print_frame = 0;
+ goto stop_stepping;
+ }
- /* If were waiting for a trap, hitting the step_resume_break
- doesn't count as getting it. */
- if (trap_expected)
+ /* If we stopped due to an explicit catchpoint, then the
+ (see above) call to SOLIB_ADD pulled in any symbols
+ from a newly-loaded library, if appropriate.
+
+ We do want the inferior to stop, but not where it is
+ now, which is in the dynamic linker callback. Rather,
+ we would like it stop in the user's program, just after
+ the call that caused this catchpoint to trigger. That
+ gives the user a more useful vantage from which to
+ examine their program's state. */
+ else if (what.main_action == BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK)
+ {
+ /* ??rehrauer: If I could figure out how to get the
+ right return PC from here, we could just set a temp
+ breakpoint and resume. I'm not sure we can without
+ cracking open the dld's shared libraries and sniffing
+ their unwind tables and text/data ranges, and that's
+ not a terribly portable notion.
+
+ Until that time, we must step the inferior out of the
+ dld callback, and also out of the dld itself (and any
+ code or stubs in libdld.sl, such as "shl_load" and
+ friends) until we reach non-dld code. At that point,
+ we can stop stepping. */
+ bpstat_get_triggered_catchpoints (stop_bpstat,
+ &stepping_through_solib_catchpoints);
+ stepping_through_solib_after_catch = 1;
+
+ /* Be sure to lift all breakpoints, so the inferior does
+ actually step past this point... */
another_trap = 1;
- }
+ break;
+ }
+ else
+ {
+ /* We want to step over this breakpoint, then keep going. */
+ another_trap = 1;
+ break;
+ }
+ }
+#endif
+ break;
+
+ case BPSTAT_WHAT_LAST:
+ /* Not a real code, but listed here to shut up gcc -Wall. */
+
+ case BPSTAT_WHAT_KEEP_CHECKING:
+ break;
}
+ }
/* We come here if we hit a breakpoint but should not
stop for it. Possibly we also were stepping
test for stepping. But, if not stepping,
do not stop. */
+ /* Are we stepping to get the inferior out of the dynamic
+ linker's hook (and possibly the dld itself) after catching
+ a shlib event? */
+ if (stepping_through_solib_after_catch)
+ {
+#if defined(SOLIB_ADD)
+ /* Have we reached our destination? If not, keep going. */
+ if (SOLIB_IN_DYNAMIC_LINKER (pid, stop_pc))
+ {
+ another_trap = 1;
+ goto keep_going;
+ }
+#endif
+ /* Else, stop and report the catchpoint(s) whose triggering
+ caused us to begin stepping. */
+ stepping_through_solib_after_catch = 0;
+ bpstat_clear (&stop_bpstat);
+ stop_bpstat = bpstat_copy (stepping_through_solib_catchpoints);
+ bpstat_clear (&stepping_through_solib_catchpoints);
+ stop_print_frame = 1;
+ goto stop_stepping;
+ }
+
+#ifndef CALL_DUMMY_BREAKPOINT_OFFSET
+ /* This is the old way of detecting the end of the stack dummy.
+ An architecture which defines CALL_DUMMY_BREAKPOINT_OFFSET gets
+ handled above. As soon as we can test it on all of them, all
+ architectures should define it. */
+
/* If this is the breakpoint at the end of a stack dummy,
- just stop silently. */
- if (!random_signal
- && PC_IN_CALL_DUMMY (stop_pc, stop_sp, stop_frame_address))
- {
- stop_print_frame = 0;
- stop_stack_dummy = 1;
+ just stop silently, unless the user was doing an si/ni, in which
+ case she'd better know what she's doing. */
+
+ if (CALL_DUMMY_HAS_COMPLETED (stop_pc, read_sp (), FRAME_FP (get_current_frame ()))
+ && !step_range_end)
+ {
+ stop_print_frame = 0;
+ stop_stack_dummy = 1;
#ifdef HP_OS_BUG
- trap_expected_after_continue = 1;
+ trap_expected_after_continue = 1;
#endif
- break;
- }
-
- if (step_resume_break_address)
+ break;
+ }
+#endif /* No CALL_DUMMY_BREAKPOINT_OFFSET. */
+
+ if (step_resume_breakpoint)
/* Having a step-resume breakpoint overrides anything
else having to do with stepping commands until
that breakpoint is reached. */
- ;
- /* If stepping through a line, keep going if still within it. */
- else if (!random_signal
- && step_range_end
- && stop_pc >= step_range_start
- && stop_pc < step_range_end
- /* The step range might include the start of the
- function, so if we are at the start of the
- step range and either the stack or frame pointers
- just changed, we've stepped outside */
- && !(stop_pc == step_range_start
- && stop_frame_address
- && (stop_sp INNER_THAN prev_sp
- || stop_frame_address != step_frame_address)))
+ /* I'm not sure whether this needs to be check_sigtramp2 or
+ whether it could/should be keep_going. */
+ goto check_sigtramp2;
+
+ if (step_range_end == 0)
+ /* Likewise if we aren't even stepping. */
+ /* I'm not sure whether this needs to be check_sigtramp2 or
+ whether it could/should be keep_going. */
+ goto check_sigtramp2;
+
+ /* If stepping through a line, keep going if still within it.
+
+ Note that step_range_end is the address of the first instruction
+ beyond the step range, and NOT the address of the last instruction
+ within it! */
+ if (stop_pc >= step_range_start
+ && stop_pc < step_range_end
+#if 0
+/* I haven't a clue what might trigger this clause, and it seems wrong anyway,
+ so I've disabled it until someone complains. -Stu 10/24/95 */
+
+ /* The step range might include the start of the
+ function, so if we are at the start of the
+ step range and either the stack or frame pointers
+ just changed, we've stepped outside */
+ && !(stop_pc == step_range_start
+ && FRAME_FP (get_current_frame ())
+ && (INNER_THAN (read_sp (), step_sp)
+ || FRAME_FP (get_current_frame ()) != step_frame_address))
+#endif
+)
{
- ;
+ /* We might be doing a BPSTAT_WHAT_SINGLE and getting a signal.
+ So definately need to check for sigtramp here. */
+ goto check_sigtramp2;
}
-
- /* We stepped out of the stepping range. See if that was due
- to a subroutine call that we should proceed to the end of. */
- else if (!random_signal && step_range_end)
+
+ /* We stepped out of the stepping range. */
+
+ /* If we are stepping at the source level and entered the runtime
+ loader dynamic symbol resolution code, we keep on single stepping
+ until we exit the run time loader code and reach the callee's
+ address. */
+ if (step_over_calls < 0 && IN_SOLIB_DYNSYM_RESOLVE_CODE (stop_pc))
+ goto keep_going;
+
+ /* We can't update step_sp every time through the loop, because
+ reading the stack pointer would slow down stepping too much.
+ But we can update it every time we leave the step range. */
+ update_step_sp = 1;
+
+ /* Did we just take a signal? */
+ if (IN_SIGTRAMP (stop_pc, stop_func_name)
+ && !IN_SIGTRAMP (prev_pc, prev_func_name)
+ && INNER_THAN (read_sp (), step_sp))
+ {
+ /* We've just taken a signal; go until we are back to
+ the point where we took it and one more. */
+
+ /* Note: The test above succeeds not only when we stepped
+ into a signal handler, but also when we step past the last
+ statement of a signal handler and end up in the return stub
+ of the signal handler trampoline. To distinguish between
+ these two cases, check that the frame is INNER_THAN the
+ previous one below. pai/1997-09-11 */
+
+
+ {
+ CORE_ADDR current_frame = FRAME_FP (get_current_frame());
+
+ if (INNER_THAN (current_frame, step_frame_address))
+ {
+ /* We have just taken a signal; go until we are back to
+ the point where we took it and one more. */
+
+ /* This code is needed at least in the following case:
+ The user types "next" and then a signal arrives (before
+ the "next" is done). */
+
+ /* Note that if we are stopped at a breakpoint, then we need
+ the step_resume breakpoint to override any breakpoints at
+ the same location, so that we will still step over the
+ breakpoint even though the signal happened. */
+ struct symtab_and_line sr_sal;
+
+ INIT_SAL(&sr_sal);
+ sr_sal.symtab = NULL;
+ sr_sal.line = 0;
+ sr_sal.pc = prev_pc;
+ /* We could probably be setting the frame to
+ step_frame_address; I don't think anyone thought to try it. */
+ step_resume_breakpoint =
+ set_momentary_breakpoint (sr_sal, NULL, bp_step_resume);
+ if (breakpoints_inserted)
+ insert_breakpoints ();
+ }
+ else
+ {
+ /* We just stepped out of a signal handler and into its calling
+ trampoline.
+
+ Normally, we'd jump to step_over_function from here,
+ but for some reason GDB can't unwind the stack correctly to find
+ the real PC for the point user code where the signal trampoline will
+ return -- FRAME_SAVED_PC fails, at least on HP-UX 10.20. But signal
+ trampolines are pretty small stubs of code, anyway, so it's OK instead
+ to just single-step out. Note: assuming such trampolines don't
+ exhibit recursion on any platform... */
+ find_pc_partial_function (stop_pc, &stop_func_name, &stop_func_start,
+ &stop_func_end);
+ /* Readjust stepping range */
+ step_range_start = stop_func_start;
+ step_range_end = stop_func_end;
+ stepping_through_sigtramp = 1;
+ }
+ }
+
+
+ /* If this is stepi or nexti, make sure that the stepping range
+ gets us past that instruction. */
+ if (step_range_end == 1)
+ /* FIXME: Does this run afoul of the code below which, if
+ we step into the middle of a line, resets the stepping
+ range? */
+ step_range_end = (step_range_start = prev_pc) + 1;
+
+ remove_breakpoints_on_following_step = 1;
+ goto keep_going;
+ }
+
+#if 0
+ /* I disabled this test because it was too complicated and slow. The
+ SKIP_PROLOGUE was especially slow, because it caused unnecessary
+ prologue examination on various architectures. The code in the #else
+ clause has been tested on the Sparc, Mips, PA, and Power
+ architectures, so it's pretty likely to be correct. -Stu 10/24/95 */
+
+ /* See if we left the step range due to a subroutine call that
+ we should proceed to the end of. */
+
+ if (stop_func_start)
+ {
+ struct symtab *s;
+
+ /* Do this after the IN_SIGTRAMP check; it might give
+ an error. */
+ prologue_pc = stop_func_start;
+
+ /* Don't skip the prologue if this is assembly source */
+ s = find_pc_symtab (stop_pc);
+ if (s && s->language != language_asm)
+ SKIP_PROLOGUE (prologue_pc);
+ }
+
+ if (!(INNER_THAN (step_sp, read_sp ())) /* don't mistake (sig)return as a call */
+ && (/* Might be a non-recursive call. If the symbols are missing
+ enough that stop_func_start == prev_func_start even though
+ they are really two functions, we will treat some calls as
+ jumps. */
+ stop_func_start != prev_func_start
+
+ /* Might be a recursive call if either we have a prologue
+ or the call instruction itself saves the PC on the stack. */
+ || prologue_pc != stop_func_start
+ || read_sp () != step_sp)
+ && (/* PC is completely out of bounds of any known objfiles. Treat
+ like a subroutine call. */
+ ! stop_func_start
+
+ /* If we do a call, we will be at the start of a function... */
+ || stop_pc == stop_func_start
+
+ /* ...except on the Alpha with -O (and also Irix 5 and
+ perhaps others), in which we might call the address
+ after the load of gp. Since prologues don't contain
+ calls, we can't return to within one, and we don't
+ jump back into them, so this check is OK. */
+
+ || stop_pc < prologue_pc
+
+ /* ...and if it is a leaf function, the prologue might
+ consist of gp loading only, so the call transfers to
+ the first instruction after the prologue. */
+ || (stop_pc == prologue_pc
+
+ /* Distinguish this from the case where we jump back
+ to the first instruction after the prologue,
+ within a function. */
+ && stop_func_start != prev_func_start)
+
+ /* If we end up in certain places, it means we did a subroutine
+ call. I'm not completely sure this is necessary now that we
+ have the above checks with stop_func_start (and now that
+ find_pc_partial_function is pickier). */
+ || IN_SOLIB_CALL_TRAMPOLINE (stop_pc, stop_func_name)
+
+ /* If none of the above apply, it is a jump within a function,
+ or a return from a subroutine. The other case is longjmp,
+ which can no longer happen here as long as the
+ handling_longjmp stuff is working. */
+ ))
+#else
+ /* This test is a much more streamlined, (but hopefully correct)
+ replacement for the code above. It's been tested on the Sparc,
+ Mips, PA, and Power architectures with good results. */
+
+ if (stop_pc == stop_func_start /* Quick test */
+ || (in_prologue (stop_pc, stop_func_start) &&
+ ! IN_SOLIB_RETURN_TRAMPOLINE (stop_pc, stop_func_name))
+ || IN_SOLIB_CALL_TRAMPOLINE (stop_pc, stop_func_name)
+ || stop_func_name == 0)
+#endif
+
{
- if (stop_func_start)
- {
- prologue_pc = stop_func_start;
- SKIP_PROLOGUE (prologue_pc);
- }
+ /* It's a subroutine call. */
- /* Did we just take a signal? */
- if (IN_SIGTRAMP (stop_pc, stop_func_name)
- && !IN_SIGTRAMP (prev_pc, prev_func_name))
+ if (step_over_calls == 0)
{
- /* This code is needed at least in the following case:
- The user types "next" and then a signal arrives (before
- the "next" is done). */
- /* We've just taken a signal; go until we are back to
- the point where we took it and one more. */
- step_resume_break_address = prev_pc;
- step_resume_break_duplicate =
- breakpoint_here_p (step_resume_break_address);
- if (breakpoints_inserted)
- insert_step_breakpoint ();
- /* Make sure that the stepping range gets us past
- that instruction. */
- if (step_range_end == 1)
- step_range_end = (step_range_start = prev_pc) + 1;
- remove_breakpoints_on_following_step = 1;
- goto save_pc;
+ /* I presume that step_over_calls is only 0 when we're
+ supposed to be stepping at the assembly language level
+ ("stepi"). Just stop. */
+ stop_step = 1;
+ break;
}
- /* ==> See comments at top of file on this algorithm. <==*/
-
- if (stop_pc == stop_func_start
- && (stop_func_start != prev_func_start
- || prologue_pc != stop_func_start
- || stop_sp != prev_sp))
+ if (step_over_calls > 0 || IGNORE_HELPER_CALL (stop_pc))
+ /* We're doing a "next". */
+ goto step_over_function;
+
+ /* If we are in a function call trampoline (a stub between
+ the calling routine and the real function), locate the real
+ function. That's what tells us (a) whether we want to step
+ into it at all, and (b) what prologue we want to run to
+ the end of, if we do step into it. */
+ tmp = SKIP_TRAMPOLINE_CODE (stop_pc);
+ if (tmp != 0)
+ stop_func_start = tmp;
+ else
{
- /* It's a subroutine call.
- (0) If we are not stepping over any calls ("stepi"), we
- just stop.
- (1) If we're doing a "next", we want to continue through
- the call ("step over the call").
- (2) If we are in a function-call trampoline (a stub between
- the calling routine and the real function), locate
- the real function and change stop_func_start.
- (3) If we're doing a "step", and there are no debug symbols
- at the target of the call, we want to continue through
- it ("step over the call").
- (4) Otherwise, we want to stop soon, after the function
- prologue ("step into the call"). */
-
- if (step_over_calls == 0)
+ tmp = DYNAMIC_TRAMPOLINE_NEXTPC (stop_pc);
+ if (tmp)
{
- /* I presume that step_over_calls is only 0 when we're
- supposed to be stepping at the assembly language level. */
- stop_step = 1;
- break;
+ struct symtab_and_line xxx;
+ /* Why isn't this s_a_l called "sr_sal", like all of the
+ other s_a_l's where this code is duplicated? */
+ INIT_SAL (&xxx); /* initialize to zeroes */
+ xxx.pc = tmp;
+ xxx.section = find_pc_overlay (xxx.pc);
+ step_resume_breakpoint =
+ set_momentary_breakpoint (xxx, NULL, bp_step_resume);
+ insert_breakpoints ();
+ goto keep_going;
}
+ }
- if (step_over_calls > 0)
- goto step_over_function;
+ /* If we have line number information for the function we
+ are thinking of stepping into, step into it.
- tmp = SKIP_TRAMPOLINE_CODE (stop_pc);
- if (tmp != 0)
- stop_func_start = tmp;
+ If there are several symtabs at that PC (e.g. with include
+ files), just want to know whether *any* of them have line
+ numbers. find_pc_line handles this. */
+ {
+ struct symtab_and_line tmp_sal;
- if (find_pc_function (stop_func_start) != 0)
- goto step_into_function;
+ tmp_sal = find_pc_line (stop_func_start, 0);
+ if (tmp_sal.line != 0)
+ goto step_into_function;
+ }
step_over_function:
- /* A subroutine call has happened. */
- /* Set a special breakpoint after the return */
- step_resume_break_address =
- ADDR_BITS_REMOVE
- (SAVED_PC_AFTER_CALL (get_current_frame ()));
- step_resume_break_duplicate
- = breakpoint_here_p (step_resume_break_address);
- if (breakpoints_inserted)
- insert_step_breakpoint ();
- goto save_pc;
+ /* A subroutine call has happened. */
+ {
+ /* Set a special breakpoint after the return */
+ struct symtab_and_line sr_sal;
+
+ INIT_SAL(&sr_sal);
+ sr_sal.symtab = NULL;
+ sr_sal.line = 0;
+
+ /* If we came here after encountering a signal in the middle of
+ a "next", use the stashed-away previous frame pc */
+ sr_sal.pc
+ = stopped_by_random_signal
+ ? prev_pc
+ : ADDR_BITS_REMOVE (SAVED_PC_AFTER_CALL (get_current_frame ()));
+
+ step_resume_breakpoint =
+ set_momentary_breakpoint (sr_sal,
+ stopped_by_random_signal ? NULL : get_current_frame (),
+ bp_step_resume);
+
+ /* We've just entered a callee, and we wish to resume until
+ it returns to the caller. Setting a step_resume bp on
+ the return PC will catch a return from the callee.
+
+ However, if the callee is recursing, we want to be careful
+ not to catch returns of those recursive calls, but of THIS
+ instance of the call.
+
+ To do this, we set the step_resume bp's frame to our current
+ caller's frame (step_frame_address, which is set by the "next"
+ or "until" command, before execution begins).
+
+ But ... don't do it if we're single-stepping out of a sigtramp,
+ because the reason we're single-stepping is precisely because
+ unwinding is a problem (HP-UX 10.20, e.g.) and the frame address
+ is likely to be incorrect. No danger of sigtramp recursion */
+
+ if (stepping_through_sigtramp)
+ {
+ step_resume_breakpoint->frame = NULL;
+ stepping_through_sigtramp = 0;
+ }
+ else if (!IN_SOLIB_DYNSYM_RESOLVE_CODE (sr_sal.pc))
+ step_resume_breakpoint->frame = step_frame_address;
+
+ if (breakpoints_inserted)
+ insert_breakpoints ();
+ }
+ goto keep_going;
step_into_function:
- /* Subroutine call with source code we should not step over.
- Do step to the first line of code in it. */
+ /* Subroutine call with source code we should not step over.
+ Do step to the first line of code in it. */
+ {
+ struct symtab *s;
+
+ s = find_pc_symtab (stop_pc);
+ if (s && s->language != language_asm)
SKIP_PROLOGUE (stop_func_start);
- sal = find_pc_line (stop_func_start, 0);
- /* Use the step_resume_break to step until
- the end of the prologue, even if that involves jumps
- (as it seems to on the vax under 4.2). */
- /* If the prologue ends in the middle of a source line,
- continue to the end of that source line.
- Otherwise, just go to end of prologue. */
+ }
+ sal = find_pc_line (stop_func_start, 0);
+ /* Use the step_resume_break to step until
+ the end of the prologue, even if that involves jumps
+ (as it seems to on the vax under 4.2). */
+ /* If the prologue ends in the middle of a source line,
+ continue to the end of that source line (if it is still
+ within the function). Otherwise, just go to end of prologue. */
#ifdef PROLOGUE_FIRSTLINE_OVERLAP
- /* no, don't either. It skips any code that's
- legitimately on the first line. */
+ /* no, don't either. It skips any code that's
+ legitimately on the first line. */
#else
- if (sal.end && sal.pc != stop_func_start)
- stop_func_start = sal.end;
+ if (sal.end && sal.pc != stop_func_start && sal.end < stop_func_end)
+ stop_func_start = sal.end;
#endif
- if (stop_func_start == stop_pc)
- {
- /* We are already there: stop now. */
- stop_step = 1;
- break;
- }
- else
- /* Put the step-breakpoint there and go until there. */
- {
- step_resume_break_address = stop_func_start;
-
- step_resume_break_duplicate
- = breakpoint_here_p (step_resume_break_address);
- if (breakpoints_inserted)
- insert_step_breakpoint ();
- /* Do not specify what the fp should be when we stop
- since on some machines the prologue
- is where the new fp value is established. */
- step_frame_address = 0;
- /* And make sure stepping stops right away then. */
- step_range_end = step_range_start;
- }
- goto save_pc;
+ if (stop_func_start == stop_pc)
+ {
+ /* We are already there: stop now. */
+ stop_step = 1;
+ break;
+ }
+ else
+ /* Put the step-breakpoint there and go until there. */
+ {
+ struct symtab_and_line sr_sal;
+
+ INIT_SAL (&sr_sal); /* initialize to zeroes */
+ sr_sal.pc = stop_func_start;
+ sr_sal.section = find_pc_overlay (stop_func_start);
+ /* Do not specify what the fp should be when we stop
+ since on some machines the prologue
+ is where the new fp value is established. */
+ step_resume_breakpoint =
+ set_momentary_breakpoint (sr_sal, NULL, bp_step_resume);
+ if (breakpoints_inserted)
+ insert_breakpoints ();
+
+ /* And make sure stepping stops right away then. */
+ step_range_end = step_range_start;
}
+ goto keep_going;
+ }
- /* We've wandered out of the step range (but haven't done a
- subroutine call or return). */
+ /* We've wandered out of the step range. */
- sal = find_pc_line(stop_pc, 0);
-
- if (step_range_end == 1 || /* stepi or nexti */
- sal.line == 0 || /* ...or no line # info */
- (stop_pc == sal.pc /* ...or we're at the start */
- && current_line != sal.line)) { /* of a different line */
- /* Stop because we're done stepping. */
- stop_step = 1;
- break;
- } else {
- /* We aren't done stepping, and we have line number info for $pc.
- Optimize by setting the step_range for the line.
- (We might not be in the original line, but if we entered a
- new line in mid-statement, we continue stepping. This makes
- things like for(;;) statements work better.) */
- step_range_start = sal.pc;
- step_range_end = sal.end;
- goto save_pc;
- }
- /* We never fall through here */
+ sal = find_pc_line(stop_pc, 0);
+
+ if (step_range_end == 1)
+ {
+ /* It is stepi or nexti. We always want to stop stepping after
+ one instruction. */
+ stop_step = 1;
+ break;
+ }
+
+ /* If we're in the return path from a shared library trampoline,
+ we want to proceed through the trampoline when stepping. */
+ if (IN_SOLIB_RETURN_TRAMPOLINE(stop_pc, stop_func_name))
+ {
+ CORE_ADDR tmp;
+
+ /* Determine where this trampoline returns. */
+ tmp = SKIP_TRAMPOLINE_CODE (stop_pc);
+
+ /* Only proceed through if we know where it's going. */
+ if (tmp)
+ {
+ /* And put the step-breakpoint there and go until there. */
+ struct symtab_and_line sr_sal;
+
+ INIT_SAL (&sr_sal); /* initialize to zeroes */
+ sr_sal.pc = tmp;
+ sr_sal.section = find_pc_overlay (sr_sal.pc);
+ /* Do not specify what the fp should be when we stop
+ since on some machines the prologue
+ is where the new fp value is established. */
+ step_resume_breakpoint =
+ set_momentary_breakpoint (sr_sal, NULL, bp_step_resume);
+ if (breakpoints_inserted)
+ insert_breakpoints ();
+
+ /* Restart without fiddling with the step ranges or
+ other state. */
+ goto keep_going;
+ }
+ }
+
+ if (sal.line == 0)
+ {
+ /* We have no line number information. That means to stop
+ stepping (does this always happen right after one instruction,
+ when we do "s" in a function with no line numbers,
+ or can this happen as a result of a return or longjmp?). */
+ stop_step = 1;
+ break;
+ }
+
+ if ((stop_pc == sal.pc)
+ && (current_line != sal.line || current_symtab != sal.symtab))
+ {
+ /* We are at the start of a different line. So stop. Note that
+ we don't stop if we step into the middle of a different line.
+ That is said to make things like for (;;) statements work
+ better. */
+ stop_step = 1;
+ break;
}
+ /* We aren't done stepping.
+
+ Optimize by setting the stepping range to the line.
+ (We might not be in the original line, but if we entered a
+ new line in mid-statement, we continue stepping. This makes
+ things like for(;;) statements work better.) */
+
+ if (stop_func_end && sal.end >= stop_func_end)
+ {
+ /* If this is the last line of the function, don't keep stepping
+ (it would probably step us out of the function).
+ This is particularly necessary for a one-line function,
+ in which after skipping the prologue we better stop even though
+ we will be in mid-line. */
+ stop_step = 1;
+ break;
+ }
+ step_range_start = sal.pc;
+ step_range_end = sal.end;
+ step_frame_address = FRAME_FP (get_current_frame ());
+ current_line = sal.line;
+ current_symtab = sal.symtab;
+
+ /* In the case where we just stepped out of a function into the middle
+ of a line of the caller, continue stepping, but step_frame_address
+ must be modified to current frame */
+ {
+ CORE_ADDR current_frame = FRAME_FP (get_current_frame());
+ if (!(INNER_THAN (current_frame, step_frame_address)))
+ step_frame_address = current_frame;
+ }
+
+
+ goto keep_going;
+
+ check_sigtramp2:
if (trap_expected
&& IN_SIGTRAMP (stop_pc, stop_func_name)
- && !IN_SIGTRAMP (prev_pc, prev_func_name))
+ && !IN_SIGTRAMP (prev_pc, prev_func_name)
+ && INNER_THAN (read_sp (), step_sp))
{
/* What has happened here is that we have just stepped the inferior
with a signal (because it is a signal which shouldn't make
us stop), thus stepping into sigtramp.
So we need to set a step_resume_break_address breakpoint
- and continue until we hit it, and then step. */
- step_resume_break_address = prev_pc;
- /* Always 1, I think, but it's probably easier to have
- the step_resume_break as usual rather than trying to
- re-use the breakpoint which is already there. */
- step_resume_break_duplicate =
- breakpoint_here_p (step_resume_break_address);
+ and continue until we hit it, and then step. FIXME: This should
+ be more enduring than a step_resume breakpoint; we should know
+ that we will later need to keep going rather than re-hitting
+ the breakpoint here (see testsuite/gdb.t06/signals.exp where
+ it says "exceedingly difficult"). */
+ struct symtab_and_line sr_sal;
+
+ INIT_SAL (&sr_sal); /* initialize to zeroes */
+ sr_sal.pc = prev_pc;
+ sr_sal.section = find_pc_overlay (sr_sal.pc);
+ /* We perhaps could set the frame if we kept track of what
+ the frame corresponding to prev_pc was. But we don't,
+ so don't. */
+ through_sigtramp_breakpoint =
+ set_momentary_breakpoint (sr_sal, NULL, bp_through_sigtramp);
if (breakpoints_inserted)
- insert_step_breakpoint ();
+ insert_breakpoints ();
+
remove_breakpoints_on_following_step = 1;
another_trap = 1;
}
-/* My apologies to the gods of structured programming. */
-/* Come to this label when you need to resume the inferior. It's really much
- cleaner at this time to do a goto than to try and figure out what the
- if-else chain ought to look like!! */
-
keep_going:
+ /* Come to this label when you need to resume the inferior.
+ It's really much cleaner to do a goto than a maze of if-else
+ conditions. */
+
+ /* ??rehrauer: ttrace on HP-UX theoretically allows one to debug
+ a vforked child beetween its creation and subsequent exit or
+ call to exec(). However, I had big problems in this rather
+ creaky exec engine, getting that to work. The fundamental
+ problem is that I'm trying to debug two processes via an
+ engine that only understands a single process with possibly
+ multiple threads.
+
+ Hence, this spot is known to have problems when
+ target_can_follow_vfork_prior_to_exec returns 1. */
-save_pc:
/* Save the pc before execution, to compare with pc after stop. */
prev_pc = read_pc (); /* Might have been DECR_AFTER_BREAK */
prev_func_start = stop_func_start; /* Ok, since if DECR_PC_AFTER
been at the start of a
function. */
prev_func_name = stop_func_name;
- prev_sp = stop_sp;
+
+ if (update_step_sp)
+ step_sp = read_sp ();
+ update_step_sp = 0;
/* If we did not do break;, it means we should keep
running the inferior and not return to debugger. */
- if (trap_expected && stop_signal != SIGTRAP)
+ if (trap_expected && stop_signal != TARGET_SIGNAL_TRAP)
{
/* We took a signal (which we are supposed to pass through to
the inferior, else we'd have done a break above) and we
haven't yet gotten our trap. Simply continue. */
- resume ((step_range_end && !step_resume_break_address)
- || (trap_expected && !step_resume_break_address)
- || bpstat_should_step (),
- stop_signal);
+ resume (CURRENTLY_STEPPING (), stop_signal);
}
else
{
to one-proceed past a breakpoint. */
/* If we've just finished a special step resume and we don't
want to hit a breakpoint, pull em out. */
- if (!step_resume_break_address &&
- remove_breakpoints_on_following_step)
+ if (step_resume_breakpoint == NULL
+ && through_sigtramp_breakpoint == NULL
+ && remove_breakpoints_on_following_step)
{
remove_breakpoints_on_following_step = 0;
remove_breakpoints ();
breakpoints_inserted = 0;
}
else if (!breakpoints_inserted &&
- (step_resume_break_address != 0 || !another_trap))
+ (through_sigtramp_breakpoint != NULL || !another_trap))
{
- insert_step_breakpoint ();
breakpoints_failed = insert_breakpoints ();
if (breakpoints_failed)
break;
trap_expected = another_trap;
- if (stop_signal == SIGTRAP)
- stop_signal = 0;
+ if (stop_signal == TARGET_SIGNAL_TRAP)
+ stop_signal = TARGET_SIGNAL_0;
#ifdef SHIFT_INST_REGS
/* I'm not sure when this following segment applies. I do know, now,
that we shouldn't rewrite the regs when we were stopped by a
random signal from the inferior process. */
+ /* FIXME: Shouldn't this be based on the valid bit of the SXIP?
+ (this is only used on the 88k). */
if (!bpstat_explains_signal (stop_bpstat)
- && (stop_signal != SIGCLD)
+ && (stop_signal != TARGET_SIGNAL_CHLD)
&& !stopped_by_random_signal)
- {
- CORE_ADDR pc_contents = read_register (PC_REGNUM);
- CORE_ADDR npc_contents = read_register (NPC_REGNUM);
- if (pc_contents != npc_contents)
- {
- write_register (NNPC_REGNUM, npc_contents);
- write_register (NPC_REGNUM, pc_contents);
- }
- }
+ SHIFT_INST_REGS();
#endif /* SHIFT_INST_REGS */
- resume ((!step_resume_break_address
- && !handling_longjmp
- && (step_range_end
- || trap_expected))
- || bpstat_should_step (),
- stop_signal);
+ resume (CURRENTLY_STEPPING (), stop_signal);
}
}
stop_stepping:
if (target_has_execution)
{
+ /* Are we stopping for a vfork event? We only stop when we see
+ the child's event. However, we may not yet have seen the
+ parent's event. And, inferior_pid is still set to the parent's
+ pid, until we resume again and follow either the parent or child.
+
+ To ensure that we can really touch inferior_pid (aka, the
+ parent process) -- which calls to functions like read_pc
+ implicitly do -- wait on the parent if necessary. */
+ if ((pending_follow.kind == TARGET_WAITKIND_VFORKED)
+ && ! pending_follow.fork_event.saw_parent_fork)
+ {
+ int parent_pid;
+
+ do {
+ if (target_wait_hook)
+ parent_pid = target_wait_hook (-1, &w);
+ else
+ parent_pid = target_wait (-1, &w);
+ } while (parent_pid != inferior_pid);
+ }
+
+
/* Assuming the inferior still exists, set these up for next
time, just like we did above if we didn't break out of the
loop. */
prev_pc = read_pc ();
prev_func_start = stop_func_start;
prev_func_name = stop_func_name;
- prev_sp = stop_sp;
}
+ do_cleanups (old_cleanups);
+}
+
+/* This function returns TRUE if ep is an internal breakpoint
+ set to catch generic shared library (aka dynamically-linked
+ library) events. (This is *NOT* the same as a catchpoint for a
+ shlib event. The latter is something a user can set; this is
+ something gdb sets for its own use, and isn't ever shown to a
+ user.) */
+static int
+is_internal_shlib_eventpoint (ep)
+ struct breakpoint * ep;
+{
+ return
+ (ep->type == bp_shlib_event)
+ ;
+}
+
+/* This function returns TRUE if bs indicates that the inferior
+ stopped due to a shared library (aka dynamically-linked library)
+ event. */
+static int
+stopped_for_internal_shlib_event (bs)
+ bpstat bs;
+{
+ /* Note that multiple eventpoints may've caused the stop. Any
+ that are associated with shlib events will be accepted. */
+ for (;bs != NULL; bs = bs->next)
+ {
+ if ((bs->breakpoint_at != NULL)
+ && is_internal_shlib_eventpoint (bs->breakpoint_at))
+ return 1;
+ }
+
+ /* If we get here, then no candidate was found. */
+ return 0;
+}
+
+/* This function returns TRUE if bs indicates that the inferior
+ stopped due to a shared library (aka dynamically-linked library)
+ event caught by a catchpoint.
+
+ If TRUE, cp_p is set to point to the catchpoint.
+
+ Else, the value of cp_p is undefined. */
+static int
+stopped_for_shlib_catchpoint (bs, cp_p)
+ bpstat bs;
+ struct breakpoint ** cp_p;
+{
+ /* Note that multiple eventpoints may've caused the stop. Any
+ that are associated with shlib events will be accepted. */
+ *cp_p = NULL;
+
+ for (;bs != NULL; bs = bs->next)
+ {
+ if ((bs->breakpoint_at != NULL)
+ && ep_is_shlib_catchpoint (bs->breakpoint_at))
+ {
+ *cp_p = bs->breakpoint_at;
+ return 1;
+ }
+ }
+
+ /* If we get here, then no candidate was found. */
+ return 0;
}
+
\f
/* Here to return control to GDB when the inferior stops for real.
Print appropriate messages, remove breakpoints, give terminal our modes.
void
normal_stop ()
{
+
+#ifdef HPUXHPPA
+ /* As with the notification of thread events, we want to delay
+ notifying the user that we've switched thread context until
+ the inferior actually stops.
+
+ (Note that there's no point in saying anything if the inferior
+ has exited!) */
+ if ((switched_from_inferior_pid != inferior_pid) &&
+ target_has_execution)
+ {
+ target_terminal_ours_for_output ();
+ printf_filtered ("[Switched to %s]\n", target_pid_or_tid_to_str (inferior_pid));
+ switched_from_inferior_pid = inferior_pid;
+ }
+#endif
+
/* Make sure that the current_frame's pc is correct. This
is a correction for setting up the frame info before doing
DECR_PC_AFTER_BREAK */
- if (target_has_execution)
+ if (target_has_execution && get_current_frame())
(get_current_frame ())->pc = read_pc ();
if (breakpoints_failed)
{
target_terminal_ours_for_output ();
print_sys_errmsg ("ptrace", breakpoints_failed);
- printf ("Stopped; cannot insert breakpoints.\n\
+ printf_filtered ("Stopped; cannot insert breakpoints.\n\
The same program may be running in another process.\n");
}
- if (target_has_execution)
- remove_step_breakpoint ();
-
if (target_has_execution && breakpoints_inserted)
+ {
if (remove_breakpoints ())
{
target_terminal_ours_for_output ();
- printf ("Cannot remove breakpoints because program is no longer writable.\n\
+ printf_filtered ("Cannot remove breakpoints because program is no longer writable.\n\
It might be running in another process.\n\
Further execution is probably impossible.\n");
}
-
+ }
breakpoints_inserted = 0;
/* Delete the breakpoint we stopped at, if it wants to be deleted.
if (stopped_by_random_signal)
disable_current_display ();
+ /* Don't print a message if in the middle of doing a "step n"
+ operation for n > 1 */
if (step_multi && stop_step)
- return;
+ goto done;
target_terminal_ours ();
+ /* Did we stop because the user set the stop_on_solib_events
+ variable? (If so, we report this as a generic, "Stopped due
+ to shlib event" message.) */
+ if (stopped_for_internal_shlib_event (stop_bpstat))
+ {
+ printf_filtered ("Stopped due to shared library event\n");
+ }
+
+ /* Look up the hook_stop and run it if it exists. */
+
+ if (stop_command && stop_command->hook)
+ {
+ catch_errors (hook_stop_stub, (char *)stop_command->hook,
+ "Error while running hook_stop:\n", RETURN_MASK_ALL);
+ }
+
if (!target_has_stack)
- return;
+ {
+
+ goto done;
+ }
+
+ /* Select innermost stack frame - i.e., current frame is frame 0,
+ and current location is based on that.
+ Don't do this on return from a stack dummy routine,
+ or if the program has exited. */
- /* Select innermost stack frame except on return from a stack dummy routine,
- or if the program has exited. Print it without a level number if
- we have changed functions or hit a breakpoint. Print source line
- if we have one. */
if (!stop_stack_dummy)
{
select_frame (get_current_frame (), 0);
+ /* Print current location without a level number, if
+ we have changed functions or hit a breakpoint.
+ Print source line if we have one.
+ bpstat_print() contains the logic deciding in detail
+ what to print, based on the event(s) that just occurred. */
+
if (stop_print_frame)
{
- int source_only;
-
- source_only = bpstat_print (stop_bpstat);
- source_only = source_only ||
- ( stop_step
- && step_frame_address == stop_frame_address
- && step_start_function == find_pc_function (stop_pc));
-
- print_stack_frame (selected_frame, -1, source_only? -1: 1);
+ int bpstat_ret;
+ int source_flag;
+
+ bpstat_ret = bpstat_print (stop_bpstat);
+ /* bpstat_print() returned one of:
+ -1: Didn't print anything
+ 0: Printed preliminary "Breakpoint n, " message, desires
+ location tacked on
+ 1: Printed something, don't tack on location */
+
+ if (bpstat_ret == -1)
+ if ( stop_step
+ && step_frame_address == FRAME_FP (get_current_frame ())
+ && step_start_function == find_pc_function (stop_pc))
+ source_flag = -1; /* finished step, just print source line */
+ else
+ source_flag = 1; /* print location and source line */
+ else if (bpstat_ret == 0) /* hit bpt, desire location */
+ source_flag = 1; /* print location and source line */
+ else /* bpstat_ret == 1, hit bpt, do not desire location */
+ source_flag = -1; /* just print source line */
+
+ /* The behavior of this routine with respect to the source
+ flag is:
+ -1: Print only source line
+ 0: Print only location
+ 1: Print location and source line */
+ show_and_print_stack_frame (selected_frame, -1, source_flag);
/* Display the auto-display expressions. */
do_displays ();
POP_FRAME ends with a setting of the current frame, so we
can use that next. */
POP_FRAME;
+ /* Set stop_pc to what it was before we called the function. Can't rely
+ on restore_inferior_status because that only gets called if we don't
+ stop in the called function. */
+ stop_pc = read_pc();
select_frame (get_current_frame (), 0);
}
+
+
+ TUIDO (((TuiOpaqueFuncPtr)tui_vCheckDataValues, selected_frame));
+
+ done:
+ annotate_stopped ();
+}
+
+static int
+hook_stop_stub (cmd)
+ char *cmd;
+{
+ execute_user_command ((struct cmd_list_element *)cmd, 0);
+ return (0);
}
\f
-static void
-insert_step_breakpoint ()
+int signal_stop_state (signo)
+ int signo;
{
- if (step_resume_break_address && !step_resume_break_duplicate)
- target_insert_breakpoint (step_resume_break_address,
- step_resume_break_shadow);
+ return signal_stop[signo];
}
-static void
-remove_step_breakpoint ()
+int signal_print_state (signo)
+ int signo;
{
- if (step_resume_break_address && !step_resume_break_duplicate)
- target_remove_breakpoint (step_resume_break_address,
- step_resume_break_shadow);
+ return signal_print[signo];
}
-\f
+
+int signal_pass_state (signo)
+ int signo;
+{
+ return signal_program[signo];
+}
+
static void
sig_print_header ()
{
- printf_filtered ("Signal\t\tStop\tPrint\tPass to program\tDescription\n");
+ printf_filtered ("\
+Signal Stop\tPrint\tPass to program\tDescription\n");
}
static void
-sig_print_info (number)
- int number;
+sig_print_info (oursig)
+ enum target_signal oursig;
{
- char *abbrev = sig_abbrev(number);
- if (abbrev == NULL)
- printf_filtered ("%d\t\t", number);
- else
- printf_filtered ("SIG%s (%d)\t", abbrev, number);
- printf_filtered ("%s\t", signal_stop[number] ? "Yes" : "No");
- printf_filtered ("%s\t", signal_print[number] ? "Yes" : "No");
- printf_filtered ("%s\t\t", signal_program[number] ? "Yes" : "No");
- printf_filtered ("%s\n", sys_siglist[number]);
+ char *name = target_signal_to_name (oursig);
+ int name_padding = 13 - strlen (name);
+ if (name_padding <= 0)
+ name_padding = 0;
+
+ printf_filtered ("%s", name);
+ printf_filtered ("%*.*s ", name_padding, name_padding, " ");
+ printf_filtered ("%s\t", signal_stop[oursig] ? "Yes" : "No");
+ printf_filtered ("%s\t", signal_print[oursig] ? "Yes" : "No");
+ printf_filtered ("%s\t\t", signal_program[oursig] ? "Yes" : "No");
+ printf_filtered ("%s\n", target_signal_to_string (oursig));
}
/* Specify how various signals in the inferior should be handled. */
char *args;
int from_tty;
{
- register char *p = args;
- int signum = 0;
- register int digits, wordlen;
- char *nextarg;
+ char **argv;
+ int digits, wordlen;
+ int sigfirst, signum, siglast;
+ enum target_signal oursig;
+ int allsigs;
+ int nsigs;
+ unsigned char *sigs;
+ struct cleanup *old_chain;
+
+ if (args == NULL)
+ {
+ error_no_arg ("signal to handle");
+ }
+
+ /* Allocate and zero an array of flags for which signals to handle. */
- if (!args)
- error_no_arg ("signal to handle");
+ nsigs = (int)TARGET_SIGNAL_LAST;
+ sigs = (unsigned char *) alloca (nsigs);
+ memset (sigs, 0, nsigs);
- while (*p)
+ /* Break the command line up into args. */
+
+ argv = buildargv (args);
+ if (argv == NULL)
{
- /* Find the end of the next word in the args. */
- for (wordlen = 0;
- p[wordlen] && p[wordlen] != ' ' && p[wordlen] != '\t';
- wordlen++);
- /* Set nextarg to the start of the word after the one we just
- found, and null-terminate this one. */
- if (p[wordlen] == '\0')
- nextarg = p + wordlen;
- else
- {
- p[wordlen] = '\0';
- nextarg = p + wordlen + 1;
- }
-
+ nomem (0);
+ }
+ old_chain = make_cleanup ((make_cleanup_func) freeargv, (char *) argv);
- for (digits = 0; p[digits] >= '0' && p[digits] <= '9'; digits++);
+ /* Walk through the args, looking for signal oursigs, signal names, and
+ actions. Signal numbers and signal names may be interspersed with
+ actions, with the actions being performed for all signals cumulatively
+ specified. Signal ranges can be specified as <LOW>-<HIGH>. */
- if (signum == 0)
+ while (*argv != NULL)
+ {
+ wordlen = strlen (*argv);
+ for (digits = 0; isdigit ((*argv)[digits]); digits++) {;}
+ allsigs = 0;
+ sigfirst = siglast = -1;
+
+ if (wordlen >= 1 && !strncmp (*argv, "all", wordlen))
{
- /* It is the first argument--must be the signal to operate on. */
- if (digits == wordlen)
- {
- /* Numeric. */
- signum = atoi (p);
- if (signum <= 0 || signum >= NSIG)
- {
- p[wordlen] = '\0';
- error ("Invalid signal %s given as argument to \"handle\".", p);
- }
- }
- else
+ /* Apply action to all signals except those used by the
+ debugger. Silently skip those. */
+ allsigs = 1;
+ sigfirst = 0;
+ siglast = nsigs - 1;
+ }
+ else if (wordlen >= 1 && !strncmp (*argv, "stop", wordlen))
+ {
+ SET_SIGS (nsigs, sigs, signal_stop);
+ SET_SIGS (nsigs, sigs, signal_print);
+ }
+ else if (wordlen >= 1 && !strncmp (*argv, "ignore", wordlen))
+ {
+ UNSET_SIGS (nsigs, sigs, signal_program);
+ }
+ else if (wordlen >= 2 && !strncmp (*argv, "print", wordlen))
+ {
+ SET_SIGS (nsigs, sigs, signal_print);
+ }
+ else if (wordlen >= 2 && !strncmp (*argv, "pass", wordlen))
+ {
+ SET_SIGS (nsigs, sigs, signal_program);
+ }
+ else if (wordlen >= 3 && !strncmp (*argv, "nostop", wordlen))
+ {
+ UNSET_SIGS (nsigs, sigs, signal_stop);
+ }
+ else if (wordlen >= 3 && !strncmp (*argv, "noignore", wordlen))
+ {
+ SET_SIGS (nsigs, sigs, signal_program);
+ }
+ else if (wordlen >= 4 && !strncmp (*argv, "noprint", wordlen))
+ {
+ UNSET_SIGS (nsigs, sigs, signal_print);
+ UNSET_SIGS (nsigs, sigs, signal_stop);
+ }
+ else if (wordlen >= 4 && !strncmp (*argv, "nopass", wordlen))
+ {
+ UNSET_SIGS (nsigs, sigs, signal_program);
+ }
+ else if (digits > 0)
+ {
+ /* It is numeric. The numeric signal refers to our own internal
+ signal numbering from target.h, not to host/target signal number.
+ This is a feature; users really should be using symbolic names
+ anyway, and the common ones like SIGHUP, SIGINT, SIGALRM, etc.
+ will work right anyway. */
+
+ sigfirst = siglast = (int) target_signal_from_command (atoi (*argv));
+ if ((*argv)[digits] == '-')
{
- /* Symbolic. */
- signum = sig_number (p);
- if (signum == -1)
- error ("No such signal \"%s\"", p);
+ siglast =
+ (int) target_signal_from_command (atoi ((*argv) + digits + 1));
}
-
- if (signum == SIGTRAP || signum == SIGINT)
+ if (sigfirst > siglast)
{
- if (!query ("SIG%s is used by the debugger.\nAre you sure you want to change it? ", sig_abbrev (signum)))
- error ("Not confirmed.");
+ /* Bet he didn't figure we'd think of this case... */
+ signum = sigfirst;
+ sigfirst = siglast;
+ siglast = signum;
}
}
- /* Else, if already got a signal number, look for flag words
- saying what to do for it. */
- else if (!strncmp (p, "stop", wordlen))
- {
- signal_stop[signum] = 1;
- signal_print[signum] = 1;
- }
- else if (wordlen >= 2 && !strncmp (p, "print", wordlen))
- signal_print[signum] = 1;
- else if (wordlen >= 2 && !strncmp (p, "pass", wordlen))
- signal_program[signum] = 1;
- else if (!strncmp (p, "ignore", wordlen))
- signal_program[signum] = 0;
- else if (wordlen >= 3 && !strncmp (p, "nostop", wordlen))
- signal_stop[signum] = 0;
- else if (wordlen >= 4 && !strncmp (p, "noprint", wordlen))
+ else
{
- signal_print[signum] = 0;
- signal_stop[signum] = 0;
+ oursig = target_signal_from_name (*argv);
+ if (oursig != TARGET_SIGNAL_UNKNOWN)
+ {
+ sigfirst = siglast = (int)oursig;
+ }
+ else
+ {
+ /* Not a number and not a recognized flag word => complain. */
+ error ("Unrecognized or ambiguous flag word: \"%s\".", *argv);
+ }
}
- else if (wordlen >= 4 && !strncmp (p, "nopass", wordlen))
- signal_program[signum] = 0;
- else if (wordlen >= 3 && !strncmp (p, "noignore", wordlen))
- signal_program[signum] = 1;
- /* Not a number and not a recognized flag word => complain. */
- else
+
+ /* If any signal numbers or symbol names were found, set flags for
+ which signals to apply actions to. */
+
+ for (signum = sigfirst; signum >= 0 && signum <= siglast; signum++)
{
- error ("Unrecognized flag word: \"%s\".", p);
+ switch ((enum target_signal)signum)
+ {
+ case TARGET_SIGNAL_TRAP:
+ case TARGET_SIGNAL_INT:
+ if (!allsigs && !sigs[signum])
+ {
+ if (query ("%s is used by the debugger.\n\
+Are you sure you want to change it? ",
+ target_signal_to_name
+ ((enum target_signal)signum)))
+ {
+ sigs[signum] = 1;
+ }
+ else
+ {
+ printf_unfiltered ("Not confirmed, unchanged.\n");
+ gdb_flush (gdb_stdout);
+ }
+ }
+ break;
+ case TARGET_SIGNAL_0:
+ case TARGET_SIGNAL_DEFAULT:
+ case TARGET_SIGNAL_UNKNOWN:
+ /* Make sure that "all" doesn't print these. */
+ break;
+ default:
+ sigs[signum] = 1;
+ break;
+ }
}
- /* Find start of next word. */
- p = nextarg;
- while (*p == ' ' || *p == '\t') p++;
+ argv++;
}
+ target_notice_signals(inferior_pid);
+
if (from_tty)
{
/* Show the results. */
sig_print_header ();
- sig_print_info (signum);
+ for (signum = 0; signum < nsigs; signum++)
+ {
+ if (sigs[signum])
+ {
+ sig_print_info (signum);
+ }
+ }
+ }
+
+ do_cleanups (old_chain);
+}
+
+static void
+xdb_handle_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ char **argv;
+ struct cleanup *old_chain;
+
+ /* Break the command line up into args. */
+
+ argv = buildargv (args);
+ if (argv == NULL)
+ {
+ nomem (0);
+ }
+ old_chain = make_cleanup (freeargv, (char *) argv);
+ if (argv[1] != (char *)NULL)
+ {
+ char *argBuf;
+ int bufLen;
+
+ bufLen = strlen(argv[0]) + 20;
+ argBuf = (char *)xmalloc(bufLen);
+ if (argBuf)
+ {
+ int validFlag = 1;
+ enum target_signal oursig;
+
+ oursig = target_signal_from_name (argv[0]);
+ memset(argBuf, 0, bufLen);
+ if (strcmp(argv[1], "Q") == 0)
+ sprintf(argBuf, "%s %s", argv[0], "noprint");
+ else
+ {
+ if (strcmp(argv[1], "s") == 0)
+ {
+ if (!signal_stop[oursig])
+ sprintf(argBuf, "%s %s", argv[0], "stop");
+ else
+ sprintf(argBuf, "%s %s", argv[0], "nostop");
+ }
+ else if (strcmp(argv[1], "i") == 0)
+ {
+ if (!signal_program[oursig])
+ sprintf(argBuf, "%s %s", argv[0], "pass");
+ else
+ sprintf(argBuf, "%s %s", argv[0], "nopass");
+ }
+ else if (strcmp(argv[1], "r") == 0)
+ {
+ if (!signal_print[oursig])
+ sprintf(argBuf, "%s %s", argv[0], "print");
+ else
+ sprintf(argBuf, "%s %s", argv[0], "noprint");
+ }
+ else
+ validFlag = 0;
+ }
+ if (validFlag)
+ handle_command(argBuf, from_tty);
+ else
+ printf_filtered("Invalid signal handling flag.\n");
+ if (argBuf)
+ free(argBuf);
+ }
}
+ do_cleanups (old_chain);
}
-/* Print current contents of the tables set by the handle command. */
+/* Print current contents of the tables set by the handle command.
+ It is possible we should just be printing signals actually used
+ by the current target (but for things to work right when switching
+ targets, all signals should be in the signal tables). */
static void
-signals_info (signum_exp)
+signals_info (signum_exp, from_tty)
char *signum_exp;
+ int from_tty;
{
- register int i;
+ enum target_signal oursig;
sig_print_header ();
if (signum_exp)
{
/* First see if this is a symbol name. */
- i = sig_number (signum_exp);
- if (i == -1)
+ oursig = target_signal_from_name (signum_exp);
+ if (oursig == TARGET_SIGNAL_UNKNOWN)
{
- /* Nope, maybe it's an address which evaluates to a signal
- number. */
- i = parse_and_eval_address (signum_exp);
- if (i >= NSIG || i < 0)
- error ("Signal number out of bounds.");
+ /* No, try numeric. */
+ oursig =
+ target_signal_from_command (parse_and_eval_address (signum_exp));
}
- sig_print_info (i);
+ sig_print_info (oursig);
return;
}
printf_filtered ("\n");
- for (i = 0; i < NSIG; i++)
+ /* These ugly casts brought to you by the native VAX compiler. */
+ for (oursig = TARGET_SIGNAL_FIRST;
+ (int)oursig < (int)TARGET_SIGNAL_LAST;
+ oursig = (enum target_signal)((int)oursig + 1))
{
QUIT;
- sig_print_info (i);
+ if (oursig != TARGET_SIGNAL_UNKNOWN
+ && oursig != TARGET_SIGNAL_DEFAULT
+ && oursig != TARGET_SIGNAL_0)
+ sig_print_info (oursig);
}
printf_filtered ("\nUse the \"handle\" command to change these tables.\n");
struct inferior_status *inf_status;
int restore_stack_info;
{
- inf_status->pc_changed = pc_changed;
inf_status->stop_signal = stop_signal;
inf_status->stop_pc = stop_pc;
- inf_status->stop_frame_address = stop_frame_address;
inf_status->stop_step = stop_step;
inf_status->stop_stack_dummy = stop_stack_dummy;
inf_status->stopped_by_random_signal = stopped_by_random_signal;
inf_status->step_range_end = step_range_end;
inf_status->step_frame_address = step_frame_address;
inf_status->step_over_calls = step_over_calls;
- inf_status->step_resume_break_address = step_resume_break_address;
inf_status->stop_after_trap = stop_after_trap;
inf_status->stop_soon_quietly = stop_soon_quietly;
/* Save original bpstat chain here; replace it with copy of chain.
inf_status->restore_stack_info = restore_stack_info;
inf_status->proceed_to_finish = proceed_to_finish;
- bcopy (stop_registers, inf_status->stop_registers, REGISTER_BYTES);
-
+ memcpy (inf_status->stop_registers, stop_registers, REGISTER_BYTES);
+
+ read_register_bytes (0, inf_status->registers, REGISTER_BYTES);
+
record_selected_frame (&(inf_status->selected_frame_address),
&(inf_status->selected_level));
return;
}
+struct restore_selected_frame_args {
+ CORE_ADDR frame_address;
+ int level;
+};
+
+static int restore_selected_frame PARAMS ((char *));
+
+/* Restore the selected frame. args is really a struct
+ restore_selected_frame_args * (declared as char * for catch_errors)
+ telling us what frame to restore. Returns 1 for success, or 0 for
+ failure. An error message will have been printed on error. */
+
+static int
+restore_selected_frame (args)
+ char *args;
+{
+ struct restore_selected_frame_args *fr =
+ (struct restore_selected_frame_args *) args;
+ struct frame_info *frame;
+ int level = fr->level;
+
+ frame = find_relative_frame (get_current_frame (), &level);
+
+ /* If inf_status->selected_frame_address is NULL, there was no
+ previously selected frame. */
+ if (frame == NULL ||
+ /* FRAME_FP (frame) != fr->frame_address ||*/ /* elz: deleted this check as a quick fix
+ to the problem that for function called by hand
+ gdb creates no internal frame structure
+ and the real stack and gdb's idea of stack
+ are different if nested calls by hands are made*/
+ level != 0)
+ {
+ warning ("Unable to restore previously selected frame.\n");
+ return 0;
+ }
+
+ select_frame (frame, fr->level);
+
+ return(1);
+}
+
void
restore_inferior_status (inf_status)
struct inferior_status *inf_status;
{
- FRAME fid;
- int level = inf_status->selected_level;
-
- pc_changed = inf_status->pc_changed;
stop_signal = inf_status->stop_signal;
stop_pc = inf_status->stop_pc;
- stop_frame_address = inf_status->stop_frame_address;
stop_step = inf_status->stop_step;
stop_stack_dummy = inf_status->stop_stack_dummy;
stopped_by_random_signal = inf_status->stopped_by_random_signal;
step_range_end = inf_status->step_range_end;
step_frame_address = inf_status->step_frame_address;
step_over_calls = inf_status->step_over_calls;
- step_resume_break_address = inf_status->step_resume_break_address;
stop_after_trap = inf_status->stop_after_trap;
stop_soon_quietly = inf_status->stop_soon_quietly;
bpstat_clear (&stop_bpstat);
breakpoint_proceeded = inf_status->breakpoint_proceeded;
proceed_to_finish = inf_status->proceed_to_finish;
- bcopy (inf_status->stop_registers, stop_registers, REGISTER_BYTES);
+ memcpy (stop_registers, inf_status->stop_registers, REGISTER_BYTES);
+
+ /* The inferior can be gone if the user types "print exit(0)"
+ (and perhaps other times). */
+ if (target_has_execution)
+ write_register_bytes (0, inf_status->registers, REGISTER_BYTES);
/* The inferior can be gone if the user types "print exit(0)"
(and perhaps other times). */
+
+ /* FIXME: If we are being called after stopping in a function which
+ is called from gdb, we should not be trying to restore the
+ selected frame; it just prints a spurious error message (The
+ message is useful, however, in detecting bugs in gdb (like if gdb
+ clobbers the stack)). In fact, should we be restoring the
+ inferior status at all in that case? . */
+
if (target_has_stack && inf_status->restore_stack_info)
{
- fid = find_relative_frame (get_current_frame (),
- &level);
-
- /* If inf_status->selected_frame_address is NULL, there was no
- previously selected frame. */
- if (fid == 0 ||
- FRAME_FP (fid) != inf_status->selected_frame_address ||
- level != 0)
- {
-#if 1
- /* I'm not sure this error message is a good idea. I have
- only seen it occur after "Can't continue previously
- requested operation" (we get called from do_cleanups), in
- which case it just adds insult to injury (one confusing
- error message after another. Besides which, does the
- user really care if we can't restore the previously
- selected frame? */
- fprintf (stderr, "Unable to restore previously selected frame.\n");
-#endif
- select_frame (get_current_frame (), 0);
- return;
- }
-
- select_frame (fid, inf_status->selected_level);
+ struct restore_selected_frame_args fr;
+ fr.level = inf_status->selected_level;
+ fr.frame_address = inf_status->selected_frame_address;
+ /* The point of catch_errors is that if the stack is clobbered,
+ walking the stack might encounter a garbage pointer and error()
+ trying to dereference it. */
+ if (catch_errors (restore_selected_frame, &fr,
+ "Unable to restore previously selected frame:\n",
+ RETURN_MASK_ERROR) == 0)
+ /* Error in restoring the selected frame. Select the innermost
+ frame. */
+
+
+ select_frame (get_current_frame (), 0);
+
}
}
+
+\f
+void
+set_follow_fork_mode_command (arg, from_tty, c)
+ char * arg;
+ int from_tty;
+ struct cmd_list_element * c;
+{
+ if (! STREQ (arg, "parent") &&
+ ! STREQ (arg, "child") &&
+ ! STREQ (arg, "both") &&
+ ! STREQ (arg, "ask"))
+ error ("follow-fork-mode must be one of \"parent\", \"child\", \"both\" or \"ask\".");
+
+ if (follow_fork_mode_string != NULL)
+ free (follow_fork_mode_string);
+ follow_fork_mode_string = savestring (arg, strlen (arg));
+}
+
+
\f
void
_initialize_infrun ()
{
register int i;
+ register int numsigs;
+ struct cmd_list_element * c;
add_info ("signals", signals_info,
"What debugger does when program gets various signals.\n\
-Specify a signal number as argument to print info on that signal only.");
+Specify a signal as argument to print info on that signal only.");
+ add_info_alias ("handle", "signals", 0);
add_com ("handle", class_run, handle_command,
- "Specify how to handle a signal.\n\
-Args are signal number followed by flags.\n\
-Flags allowed are \"stop\", \"print\", \"pass\",\n\
- \"nostop\", \"noprint\" or \"nopass\".\n\
+ concat ("Specify how to handle a signal.\n\
+Args are signals and actions to apply to those signals.\n\
+Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\
+from 1-15 are allowed for compatibility with old versions of GDB.\n\
+Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\
+The special arg \"all\" is recognized to mean all signals except those\n\
+used by the debugger, typically SIGTRAP and SIGINT.\n",
+"Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\
+\"pass\", \"nopass\", \"ignore\", or \"noignore\".\n\
+Stop means reenter debugger if this signal happens (implies print).\n\
Print means print a message if this signal happens.\n\
+Pass means let program see this signal; otherwise program doesn't know.\n\
+Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
+Pass and Stop may be combined.", NULL));
+ if (xdb_commands)
+ {
+ add_com("lz", class_info, signals_info,
+ "What debugger does when program gets various signals.\n\
+Specify a signal as argument to print info on that signal only.");
+ add_com("z", class_run, xdb_handle_command,
+ concat ("Specify how to handle a signal.\n\
+Args are signals and actions to apply to those signals.\n\
+Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\
+from 1-15 are allowed for compatibility with old versions of GDB.\n\
+Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\
+The special arg \"all\" is recognized to mean all signals except those\n\
+used by the debugger, typically SIGTRAP and SIGINT.\n",
+"Recognized actions include \"s\" (toggles between stop and nostop), \n\
+\"r\" (toggles between print and noprint), \"i\" (toggles between pass and \
+nopass), \"Q\" (noprint)\n\
Stop means reenter debugger if this signal happens (implies print).\n\
+Print means print a message if this signal happens.\n\
Pass means let program see this signal; otherwise program doesn't know.\n\
-Pass and Stop may be combined.");
+Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
+Pass and Stop may be combined.", NULL));
+ }
- for (i = 0; i < NSIG; i++)
+ if (!dbx_commands)
+ stop_command = add_cmd ("stop", class_obscure, not_just_help_class_command,
+ "There is no `stop' command, but you can set a hook on `stop'.\n\
+This allows you to set a list of commands to be run each time execution\n\
+of the program stops.", &cmdlist);
+
+ numsigs = (int)TARGET_SIGNAL_LAST;
+ signal_stop = (unsigned char *)
+ xmalloc (sizeof (signal_stop[0]) * numsigs);
+ signal_print = (unsigned char *)
+ xmalloc (sizeof (signal_print[0]) * numsigs);
+ signal_program = (unsigned char *)
+ xmalloc (sizeof (signal_program[0]) * numsigs);
+ for (i = 0; i < numsigs; i++)
{
signal_stop[i] = 1;
signal_print[i] = 1;
/* Signals caused by debugger's own actions
should not be given to the program afterwards. */
- signal_program[SIGTRAP] = 0;
- signal_program[SIGINT] = 0;
+ signal_program[TARGET_SIGNAL_TRAP] = 0;
+ signal_program[TARGET_SIGNAL_INT] = 0;
/* Signals that are not errors should not normally enter the debugger. */
-#ifdef SIGALRM
- signal_stop[SIGALRM] = 0;
- signal_print[SIGALRM] = 0;
-#endif /* SIGALRM */
-#ifdef SIGVTALRM
- signal_stop[SIGVTALRM] = 0;
- signal_print[SIGVTALRM] = 0;
-#endif /* SIGVTALRM */
-#ifdef SIGPROF
- signal_stop[SIGPROF] = 0;
- signal_print[SIGPROF] = 0;
-#endif /* SIGPROF */
-#ifdef SIGCHLD
- signal_stop[SIGCHLD] = 0;
- signal_print[SIGCHLD] = 0;
-#endif /* SIGCHLD */
-#ifdef SIGCLD
- signal_stop[SIGCLD] = 0;
- signal_print[SIGCLD] = 0;
-#endif /* SIGCLD */
-#ifdef SIGIO
- signal_stop[SIGIO] = 0;
- signal_print[SIGIO] = 0;
-#endif /* SIGIO */
-#ifdef SIGURG
- signal_stop[SIGURG] = 0;
- signal_print[SIGURG] = 0;
-#endif /* SIGURG */
+ signal_stop[TARGET_SIGNAL_ALRM] = 0;
+ signal_print[TARGET_SIGNAL_ALRM] = 0;
+ signal_stop[TARGET_SIGNAL_VTALRM] = 0;
+ signal_print[TARGET_SIGNAL_VTALRM] = 0;
+ signal_stop[TARGET_SIGNAL_PROF] = 0;
+ signal_print[TARGET_SIGNAL_PROF] = 0;
+ signal_stop[TARGET_SIGNAL_CHLD] = 0;
+ signal_print[TARGET_SIGNAL_CHLD] = 0;
+ signal_stop[TARGET_SIGNAL_IO] = 0;
+ signal_print[TARGET_SIGNAL_IO] = 0;
+ signal_stop[TARGET_SIGNAL_POLL] = 0;
+ signal_print[TARGET_SIGNAL_POLL] = 0;
+ signal_stop[TARGET_SIGNAL_URG] = 0;
+ signal_print[TARGET_SIGNAL_URG] = 0;
+
+#ifdef SOLIB_ADD
+ add_show_from_set
+ (add_set_cmd ("stop-on-solib-events", class_support, var_zinteger,
+ (char *) &stop_on_solib_events,
+ "Set stopping for shared library events.\n\
+If nonzero, gdb will give control to the user when the dynamic linker\n\
+notifies gdb of shared library events. The most common event of interest\n\
+to the user would be loading/unloading of a new library.\n",
+ &setlist),
+ &showlist);
+#endif
+
+ c = add_set_enum_cmd ("follow-fork-mode",
+ class_run,
+ follow_fork_mode_kind_names,
+ (char *) &follow_fork_mode_string,
+/* ??rehrauer: The "both" option is broken, by what may be a 10.20
+ kernel problem. It's also not terribly useful without a GUI to
+ help the user drive two debuggers. So for now, I'm disabling
+ the "both" option.
+/* "Set debugger response to a program call of fork or vfork.\n\
+A fork or vfork creates a new process. follow-fork-mode can be:\n\
+ parent - the original process is debugged after a fork\n\
+ child - the new process is debugged after a fork\n\
+ both - both the parent and child are debugged after a fork\n\
+ ask - the debugger will ask for one of the above choices\n\
+For \"both\", another copy of the debugger will be started to follow\n\
+the new child process. The original debugger will continue to follow\n\
+the original parent process. To distinguish their prompts, the\n\
+debugger copy's prompt will be changed.\n\
+For \"parent\" or \"child\", the unfollowed process will run free.\n\
+By default, the debugger will follow the parent process.",
+*/
+ "Set debugger response to a program call of fork or vfork.\n\
+A fork or vfork creates a new process. follow-fork-mode can be:\n\
+ parent - the original process is debugged after a fork\n\
+ child - the new process is debugged after a fork\n\
+ ask - the debugger will ask for one of the above choices\n\
+For \"parent\" or \"child\", the unfollowed process will run free.\n\
+By default, the debugger will follow the parent process.",
+ &setlist);
+/* c->function.sfunc = ;*/
+ add_show_from_set (c, &showlist);
+
+ set_follow_fork_mode_command ("parent", 0, NULL);
}