Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
- 2008 Free Software Foundation, Inc.
+ 2008, 2009 Free Software Foundation, Inc.
This file is part of GDB.
#include "language.h"
#include "solib.h"
#include "main.h"
-
#include "gdb_assert.h"
#include "mi/mi-common.h"
#include "event-top.h"
+#include "record.h"
/* Prototypes for local functions */
static int currently_stepping (struct thread_info *tp);
+static int currently_stepping_or_nexting_callback (struct thread_info *tp,
+ void *data);
+
static void xdb_handle_command (char *args, int from_tty);
static int prepare_to_proceed (int);
void _initialize_infrun (void);
+void nullify_last_target_wait_ptid (void);
+
/* When set, stop the 'step' command if we enter a function which has
no line number information. The normal behavior is that we step
over such function. */
int stop_after_trap;
-/* Save register contents here when about to pop a stack dummy frame,
- if-and-only-if proceed_to_finish is set.
+/* Save register contents here when executing a "finish" command or are
+ about to pop a stack dummy frame, if-and-only-if proceed_to_finish is set.
Thus this contains the return value from the called function (assuming
values are returned in a register). */
void init_infwait_state (void);
-/* This is used to remember when a fork, vfork or exec event
- was caught by a catchpoint, and thus the event is to be
- followed at the next resume of the inferior, and not
- immediately. */
-static struct
-{
- enum target_waitkind kind;
- struct
- {
- ptid_t parent_pid;
- ptid_t child_pid;
- }
- fork_event;
- char *execd_pathname;
-}
-pending_follow;
-
static const char follow_fork_mode_child[] = "child";
static const char follow_fork_mode_parent[] = "parent";
}
\f
+/* Tell the target to follow the fork we're stopped at. Returns true
+ if the inferior should be resumed; false, if the target for some
+ reason decided it's best not to resume. */
+
static int
follow_fork (void)
{
int follow_child = (follow_fork_mode_string == follow_fork_mode_child);
+ int should_resume = 1;
+ struct thread_info *tp;
+
+ /* Copy user stepping state to the new inferior thread. FIXME: the
+ followed fork child thread should have a copy of most of the
+ parent thread structure's run control related fields, not just these.
+ Initialized to avoid "may be used uninitialized" warnings from gcc. */
+ struct breakpoint *step_resume_breakpoint = NULL;
+ CORE_ADDR step_range_start = 0;
+ CORE_ADDR step_range_end = 0;
+ struct frame_id step_frame_id = { 0 };
+
+ if (!non_stop)
+ {
+ ptid_t wait_ptid;
+ struct target_waitstatus wait_status;
+
+ /* Get the last target status returned by target_wait(). */
+ get_last_target_status (&wait_ptid, &wait_status);
+
+ /* If not stopped at a fork event, then there's nothing else to
+ do. */
+ if (wait_status.kind != TARGET_WAITKIND_FORKED
+ && wait_status.kind != TARGET_WAITKIND_VFORKED)
+ return 1;
+
+ /* Check if we switched over from WAIT_PTID, since the event was
+ reported. */
+ if (!ptid_equal (wait_ptid, minus_one_ptid)
+ && !ptid_equal (inferior_ptid, wait_ptid))
+ {
+ /* We did. Switch back to WAIT_PTID thread, to tell the
+ target to follow it (in either direction). We'll
+ afterwards refuse to resume, and inform the user what
+ happened. */
+ switch_to_thread (wait_ptid);
+ should_resume = 0;
+ }
+ }
+
+ tp = inferior_thread ();
+
+ /* If there were any forks/vforks that were caught and are now to be
+ followed, then do so now. */
+ switch (tp->pending_follow.kind)
+ {
+ case TARGET_WAITKIND_FORKED:
+ case TARGET_WAITKIND_VFORKED:
+ {
+ ptid_t parent, child;
+
+ /* If the user did a next/step, etc, over a fork call,
+ preserve the stepping state in the fork child. */
+ if (follow_child && should_resume)
+ {
+ step_resume_breakpoint
+ = clone_momentary_breakpoint (tp->step_resume_breakpoint);
+ step_range_start = tp->step_range_start;
+ step_range_end = tp->step_range_end;
+ step_frame_id = tp->step_frame_id;
+
+ /* For now, delete the parent's sr breakpoint, otherwise,
+ parent/child sr breakpoints are considered duplicates,
+ and the child version will not be installed. Remove
+ this when the breakpoints module becomes aware of
+ inferiors and address spaces. */
+ delete_step_resume_breakpoint (tp);
+ tp->step_range_start = 0;
+ tp->step_range_end = 0;
+ tp->step_frame_id = null_frame_id;
+ }
+
+ parent = inferior_ptid;
+ child = tp->pending_follow.value.related_pid;
+
+ /* Tell the target to do whatever is necessary to follow
+ either parent or child. */
+ if (target_follow_fork (follow_child))
+ {
+ /* Target refused to follow, or there's some other reason
+ we shouldn't resume. */
+ should_resume = 0;
+ }
+ else
+ {
+ /* This pending follow fork event is now handled, one way
+ or another. The previous selected thread may be gone
+ from the lists by now, but if it is still around, need
+ to clear the pending follow request. */
+ tp = find_thread_ptid (parent);
+ if (tp)
+ tp->pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
+
+ /* This makes sure we don't try to apply the "Switched
+ over from WAIT_PID" logic above. */
+ nullify_last_target_wait_ptid ();
+
+ /* If we followed the child, switch to it... */
+ if (follow_child)
+ {
+ switch_to_thread (child);
+
+ /* ... and preserve the stepping state, in case the
+ user was stepping over the fork call. */
+ if (should_resume)
+ {
+ tp = inferior_thread ();
+ tp->step_resume_breakpoint = step_resume_breakpoint;
+ tp->step_range_start = step_range_start;
+ tp->step_range_end = step_range_end;
+ tp->step_frame_id = step_frame_id;
+ }
+ else
+ {
+ /* If we get here, it was because we're trying to
+ resume from a fork catchpoint, but, the user
+ has switched threads away from the thread that
+ forked. In that case, the resume command
+ issued is most likely not applicable to the
+ child, so just warn, and refuse to resume. */
+ warning (_("\
+Not resuming: switched threads before following fork child.\n"));
+ }
+
+ /* Reset breakpoints in the child as appropriate. */
+ follow_inferior_reset_breakpoints ();
+ }
+ else
+ switch_to_thread (parent);
+ }
+ }
+ break;
+ case TARGET_WAITKIND_SPURIOUS:
+ /* Nothing to follow. */
+ break;
+ default:
+ internal_error (__FILE__, __LINE__,
+ "Unexpected pending_follow.kind %d\n",
+ tp->pending_follow.kind);
+ break;
+ }
- return target_follow_fork (follow_child);
+ return should_resume;
}
void
th->step_range_start = 0;
th->step_range_end = 0;
+ /* The target reports the exec event to the main thread, even if
+ some other thread does the exec, and even if the main thread was
+ already stopped --- if debugging in non-stop mode, it's possible
+ the user had the main thread held stopped in the previous image
+ --- release it now. This is the same behavior as step-over-exec
+ with scheduler-locking on in all-stop mode. */
+ th->stop_requested = 0;
+
/* What is this a.out's name? */
printf_unfiltered (_("Executing new program: %s\n"), execd_pathname);
/* Saved contents of copy area. */
static gdb_byte *displaced_step_saved_copy;
-/* When this is non-zero, we are allowed to use displaced stepping, if
- the architecture supports it. When this is zero, we use
- traditional the hold-and-step approach. */
-int can_use_displaced_stepping = 1;
+/* Enum strings for "set|show displaced-stepping". */
+
+static const char can_use_displaced_stepping_auto[] = "auto";
+static const char can_use_displaced_stepping_on[] = "on";
+static const char can_use_displaced_stepping_off[] = "off";
+static const char *can_use_displaced_stepping_enum[] =
+{
+ can_use_displaced_stepping_auto,
+ can_use_displaced_stepping_on,
+ can_use_displaced_stepping_off,
+ NULL,
+};
+
+/* If ON, and the architecture supports it, GDB will use displaced
+ stepping to step over breakpoints. If OFF, or if the architecture
+ doesn't support it, GDB will instead use the traditional
+ hold-and-step approach. If AUTO (which is the default), GDB will
+ decide which technique to use to step over breakpoints depending on
+ which of all-stop or non-stop mode is active --- displaced stepping
+ in non-stop mode; hold-and-step in all-stop mode. */
+
+static const char *can_use_displaced_stepping =
+ can_use_displaced_stepping_auto;
+
static void
show_can_use_displaced_stepping (struct ui_file *file, int from_tty,
struct cmd_list_element *c,
const char *value)
{
- fprintf_filtered (file, _("\
-Debugger's willingness to use displaced stepping to step over "
-"breakpoints is %s.\n"), value);
+ if (can_use_displaced_stepping == can_use_displaced_stepping_auto)
+ fprintf_filtered (file, _("\
+Debugger's willingness to use displaced stepping to step over \
+breakpoints is %s (currently %s).\n"),
+ value, non_stop ? "on" : "off");
+ else
+ fprintf_filtered (file, _("\
+Debugger's willingness to use displaced stepping to step over \
+breakpoints is %s.\n"), value);
}
-/* Return non-zero if displaced stepping is enabled, and can be used
- with GDBARCH. */
+/* Return non-zero if displaced stepping can/should be used to step
+ over breakpoints. */
+
static int
use_displaced_stepping (struct gdbarch *gdbarch)
{
- return (can_use_displaced_stepping
- && gdbarch_displaced_step_copy_insn_p (gdbarch));
+ return (((can_use_displaced_stepping == can_use_displaced_stepping_auto
+ && non_stop)
+ || can_use_displaced_stepping == can_use_displaced_stepping_on)
+ && gdbarch_displaced_step_copy_insn_p (gdbarch)
+ && !RECORD_IS_USED);
}
/* Clean out any stray displaced stepping state. */
context_switch (ptid);
- actual_pc = read_pc ();
+ actual_pc = regcache_read_pc (get_thread_regcache (ptid));
if (breakpoint_here_p (actual_pc))
{
}
}
+/* Try to setup for software single stepping over the specified location.
+ Return 1 if target_resume() should use hardware single step.
+
+ GDBARCH the current gdbarch.
+ PC the location to step over. */
+
+static int
+maybe_software_singlestep (struct gdbarch *gdbarch, CORE_ADDR pc)
+{
+ int hw_step = 1;
+
+ if (gdbarch_software_single_step_p (gdbarch)
+ && gdbarch_software_single_step (gdbarch, get_current_frame ()))
+ {
+ hw_step = 0;
+ /* Do not pull these breakpoints until after a `wait' in
+ `wait_for_inferior' */
+ singlestep_breakpoints_inserted_p = 1;
+ singlestep_ptid = inferior_ptid;
+ singlestep_pc = pc;
+ }
+ return hw_step;
+}
/* Resume the inferior, but allow a QUIT. This is useful if the user
wants to interrupt some lengthy single-stepping operation
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct thread_info *tp = inferior_thread ();
CORE_ADDR pc = regcache_read_pc (regcache);
+
QUIT;
if (debug_infrun)
}
}
- if (step && gdbarch_software_single_step_p (gdbarch))
- {
- /* Do it the hard way, w/temp breakpoints */
- if (gdbarch_software_single_step (gdbarch, get_current_frame ()))
- {
- /* ...and don't ask hardware to do it. */
- step = 0;
- /* and do not pull these breakpoints until after a `wait' in
- `wait_for_inferior' */
- singlestep_breakpoints_inserted_p = 1;
- singlestep_ptid = inferior_ptid;
- singlestep_pc = pc;
- }
- }
-
- /* If there were any forks/vforks/execs that were caught and are
- now to be followed, then do so. */
- switch (pending_follow.kind)
- {
- case TARGET_WAITKIND_FORKED:
- case TARGET_WAITKIND_VFORKED:
- pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
- if (follow_fork ())
- should_resume = 0;
- break;
-
- case TARGET_WAITKIND_EXECD:
- /* follow_exec is called as soon as the exec event is seen. */
- pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
- break;
-
- default:
- break;
- }
-
- /* Install inferior's terminal modes. */
- target_terminal_inferior ();
+ /* Do we need to do it the hard way, w/temp breakpoints? */
+ if (step)
+ step = maybe_software_singlestep (gdbarch, pc);
if (should_resume)
{
displaced_step_dump_bytes (gdb_stdlog, buf, sizeof (buf));
}
- target_resume (resume_ptid, step, sig);
+ /* Install inferior's terminal modes. */
+ target_terminal_inferior ();
/* Avoid confusing the next resume, if the next stop/resume
happens to apply to another thread. */
tp->stop_signal = TARGET_SIGNAL_0;
+
+ target_resume (resume_ptid, step, sig);
}
discard_cleanups (old_cleanups);
/* Clear out all variables saying what to do when inferior is continued.
First do this, then set the ones you want, then call `proceed'. */
-void
-clear_proceed_status (void)
+static void
+clear_proceed_status_thread (struct thread_info *tp)
{
- if (!ptid_equal (inferior_ptid, null_ptid))
- {
- struct thread_info *tp;
- struct inferior *inferior;
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: clear_proceed_status_thread (%s)\n",
+ target_pid_to_str (tp->ptid));
- tp = inferior_thread ();
+ tp->trap_expected = 0;
+ tp->step_range_start = 0;
+ tp->step_range_end = 0;
+ tp->step_frame_id = null_frame_id;
+ tp->step_over_calls = STEP_OVER_UNDEBUGGABLE;
+ tp->stop_requested = 0;
- tp->trap_expected = 0;
- tp->step_range_start = 0;
- tp->step_range_end = 0;
- tp->step_frame_id = null_frame_id;
- tp->step_over_calls = STEP_OVER_UNDEBUGGABLE;
+ tp->stop_step = 0;
- tp->stop_step = 0;
+ tp->proceed_to_finish = 0;
- tp->proceed_to_finish = 0;
+ /* Discard any remaining commands or status from previous stop. */
+ bpstat_clear (&tp->stop_bpstat);
+}
- /* Discard any remaining commands or status from previous
- stop. */
- bpstat_clear (&tp->stop_bpstat);
+static int
+clear_proceed_status_callback (struct thread_info *tp, void *data)
+{
+ if (is_exited (tp->ptid))
+ return 0;
+ clear_proceed_status_thread (tp);
+ return 0;
+}
+
+void
+clear_proceed_status (void)
+{
+ if (!ptid_equal (inferior_ptid, null_ptid))
+ {
+ struct inferior *inferior;
+
+ if (non_stop)
+ {
+ /* If in non-stop mode, only delete the per-thread status
+ of the current thread. */
+ clear_proceed_status_thread (inferior_thread ());
+ }
+ else
+ {
+ /* In all-stop mode, delete the per-thread status of
+ *all* threads. */
+ iterate_over_threads (clear_proceed_status_callback, NULL);
+ }
+
inferior = current_inferior ();
inferior->stop_soon = NO_STOP_QUIETLY;
}
stop_after_trap = 0;
- breakpoint_proceeded = 1; /* We're about to proceed... */
+
+ observer_notify_about_to_proceed ();
if (stop_registers)
{
}
}
-/* This should be suitable for any targets that support threads. */
+/* Check the current thread against the thread that reported the most recent
+ event. If a step-over is required return TRUE and set the current thread
+ to the old thread. Otherwise return FALSE.
+
+ This should be suitable for any targets that support threads. */
static int
prepare_to_proceed (int step)
{
ptid_t wait_ptid;
struct target_waitstatus wait_status;
+ int schedlock_enabled;
+
+ /* With non-stop mode on, threads are always handled individually. */
+ gdb_assert (! non_stop);
/* Get the last target status returned by target_wait(). */
get_last_target_status (&wait_ptid, &wait_status);
return 0;
}
+ schedlock_enabled = (scheduler_mode == schedlock_on
+ || (scheduler_mode == schedlock_step
+ && step));
+
/* Switched over from WAIT_PID. */
if (!ptid_equal (wait_ptid, minus_one_ptid)
- && !ptid_equal (inferior_ptid, wait_ptid))
+ && !ptid_equal (inferior_ptid, wait_ptid)
+ /* Don't single step WAIT_PID if scheduler locking is on. */
+ && !schedlock_enabled)
{
struct regcache *regcache = get_thread_regcache (wait_ptid);
void
proceed (CORE_ADDR addr, enum target_signal siggnal, int step)
{
- struct regcache *regcache = get_current_regcache ();
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct regcache *regcache;
+ struct gdbarch *gdbarch;
struct thread_info *tp;
- CORE_ADDR pc = regcache_read_pc (regcache);
+ CORE_ADDR pc;
int oneproc = 0;
- enum target_signal stop_signal;
+
+ /* If we're stopped at a fork/vfork, follow the branch set by the
+ "set follow-fork-mode" command; otherwise, we'll just proceed
+ resuming the current thread. */
+ if (!follow_fork ())
+ {
+ /* The target for some reason decided not to resume. */
+ normal_stop ();
+ return;
+ }
+
+ regcache = get_current_regcache ();
+ gdbarch = get_regcache_arch (regcache);
+ pc = regcache_read_pc (regcache);
if (step > 0)
step_start_function = find_pc_function (pc);
&& !ptid_equal (last_ptid, null_ptid)
&& !ptid_equal (last_ptid, minus_one_ptid))
{
- last_thread = find_thread_pid (last_ptid);
+ last_thread = find_thread_ptid (last_ptid);
if (last_thread)
{
tp->stop_signal = last_thread->stop_signal;
breakpoint_init_inferior (inf_starting);
- /* The first resume is not following a fork/vfork/exec. */
- pending_follow.kind = TARGET_WAITKIND_SPURIOUS; /* I.e., none. */
-
clear_proceed_status ();
stepping_past_singlestep_breakpoint = 0;
static void print_stop_reason (enum inferior_stop_reason stop_reason,
int stop_info);
+/* Callback for iterate over threads. If the thread is stopped, but
+ the user/frontend doesn't know about that yet, go through
+ normal_stop, as if the thread had just stopped now. ARG points at
+ a ptid. If PTID is MINUS_ONE_PTID, applies to all threads. If
+ ptid_is_pid(PTID) is true, applies to all threads of the process
+ pointed at by PTID. Otherwise, apply only to the thread pointed by
+ PTID. */
+
+static int
+infrun_thread_stop_requested_callback (struct thread_info *info, void *arg)
+{
+ ptid_t ptid = * (ptid_t *) arg;
+
+ if ((ptid_equal (info->ptid, ptid)
+ || ptid_equal (minus_one_ptid, ptid)
+ || (ptid_is_pid (ptid)
+ && ptid_get_pid (ptid) == ptid_get_pid (info->ptid)))
+ && is_running (info->ptid)
+ && !is_executing (info->ptid))
+ {
+ struct cleanup *old_chain;
+ struct execution_control_state ecss;
+ struct execution_control_state *ecs = &ecss;
+
+ memset (ecs, 0, sizeof (*ecs));
+
+ old_chain = make_cleanup_restore_current_thread ();
+
+ switch_to_thread (info->ptid);
+
+ /* Go through handle_inferior_event/normal_stop, so we always
+ have consistent output as if the stop event had been
+ reported. */
+ ecs->ptid = info->ptid;
+ ecs->event_thread = find_thread_ptid (info->ptid);
+ ecs->ws.kind = TARGET_WAITKIND_STOPPED;
+ ecs->ws.value.sig = TARGET_SIGNAL_0;
+
+ handle_inferior_event (ecs);
+
+ if (!ecs->wait_some_more)
+ {
+ struct thread_info *tp;
+
+ normal_stop ();
+
+ /* Finish off the continuations. The continations
+ themselves are responsible for realising the thread
+ didn't finish what it was supposed to do. */
+ tp = inferior_thread ();
+ do_all_intermediate_continuations_thread (tp);
+ do_all_continuations_thread (tp);
+ }
+
+ do_cleanups (old_chain);
+ }
+
+ return 0;
+}
+
+/* This function is attached as a "thread_stop_requested" observer.
+ Cleanup local state that assumed the PTID was to be resumed, and
+ report the stop to the frontend. */
+
+static void
+infrun_thread_stop_requested (ptid_t ptid)
+{
+ struct displaced_step_request *it, *next, *prev = NULL;
+
+ /* PTID was requested to stop. Remove it from the displaced
+ stepping queue, so we don't try to resume it automatically. */
+ for (it = displaced_step_request_queue; it; it = next)
+ {
+ next = it->next;
+
+ if (ptid_equal (it->ptid, ptid)
+ || ptid_equal (minus_one_ptid, ptid)
+ || (ptid_is_pid (ptid)
+ && ptid_get_pid (ptid) == ptid_get_pid (it->ptid)))
+ {
+ if (displaced_step_request_queue == it)
+ displaced_step_request_queue = it->next;
+ else
+ prev->next = it->next;
+
+ xfree (it);
+ }
+ else
+ prev = it;
+ }
+
+ iterate_over_threads (infrun_thread_stop_requested_callback, &ptid);
+}
+
+static void
+infrun_thread_thread_exit (struct thread_info *tp, int silent)
+{
+ if (ptid_equal (target_last_wait_ptid, tp->ptid))
+ nullify_last_target_wait_ptid ();
+}
+
/* Callback for iterate_over_threads. */
static int
delete_step_thread_step_resume_breakpoint ();
}
+/* Pretty print the results of target_wait, for debugging purposes. */
+
+static void
+print_target_wait_results (ptid_t waiton_ptid, ptid_t result_ptid,
+ const struct target_waitstatus *ws)
+{
+ char *status_string = target_waitstatus_to_string (ws);
+ struct ui_file *tmp_stream = mem_fileopen ();
+ char *text;
+ long len;
+
+ /* The text is split over several lines because it was getting too long.
+ Call fprintf_unfiltered (gdb_stdlog) once so that the text is still
+ output as a unit; we want only one timestamp printed if debug_timestamp
+ is set. */
+
+ fprintf_unfiltered (tmp_stream,
+ "infrun: target_wait (%d", PIDGET (waiton_ptid));
+ if (PIDGET (waiton_ptid) != -1)
+ fprintf_unfiltered (tmp_stream,
+ " [%s]", target_pid_to_str (waiton_ptid));
+ fprintf_unfiltered (tmp_stream, ", status) =\n");
+ fprintf_unfiltered (tmp_stream,
+ "infrun: %d [%s],\n",
+ PIDGET (result_ptid), target_pid_to_str (result_ptid));
+ fprintf_unfiltered (tmp_stream,
+ "infrun: %s\n",
+ status_string);
+
+ text = ui_file_xstrdup (tmp_stream, &len);
+
+ /* This uses %s in part to handle %'s in the text, but also to avoid
+ a gcc error: the format attribute requires a string literal. */
+ fprintf_unfiltered (gdb_stdlog, "%s", text);
+
+ xfree (status_string);
+ xfree (text);
+ ui_file_delete (tmp_stream);
+}
+
/* Wait for control to return from inferior to debugger.
If TREAT_EXEC_AS_SIGTRAP is non-zero, then handle EXEC signals
while (1)
{
+ struct cleanup *old_chain;
+
if (deprecated_target_wait_hook)
- ecs->ptid = deprecated_target_wait_hook (waiton_ptid, &ecs->ws);
+ ecs->ptid = deprecated_target_wait_hook (waiton_ptid, &ecs->ws, 0);
else
- ecs->ptid = target_wait (waiton_ptid, &ecs->ws);
+ ecs->ptid = target_wait (waiton_ptid, &ecs->ws, 0);
+
+ if (debug_infrun)
+ print_target_wait_results (waiton_ptid, ecs->ptid, &ecs->ws);
if (treat_exec_as_sigtrap && ecs->ws.kind == TARGET_WAITKIND_EXECD)
{
ecs->ws.value.sig = TARGET_SIGNAL_TRAP;
}
+ /* If an error happens while handling the event, propagate GDB's
+ knowledge of the executing state to the frontend/user running
+ state. */
+ old_chain = make_cleanup (finish_thread_state_cleanup, &minus_one_ptid);
+
/* Now figure out what to do with the result of the result. */
handle_inferior_event (ecs);
+ /* No error, don't finish the state yet. */
+ discard_cleanups (old_chain);
+
if (!ecs->wait_some_more)
break;
}
struct execution_control_state ecss;
struct execution_control_state *ecs = &ecss;
struct cleanup *old_chain = make_cleanup (null_cleanup, NULL);
+ struct cleanup *ts_old_chain;
int was_sync = sync_execution;
memset (ecs, 0, sizeof (*ecs));
if (deprecated_target_wait_hook)
ecs->ptid =
- deprecated_target_wait_hook (waiton_ptid, &ecs->ws);
+ deprecated_target_wait_hook (waiton_ptid, &ecs->ws, TARGET_WNOHANG);
else
- ecs->ptid = target_wait (waiton_ptid, &ecs->ws);
+ ecs->ptid = target_wait (waiton_ptid, &ecs->ws, TARGET_WNOHANG);
+
+ if (debug_infrun)
+ print_target_wait_results (waiton_ptid, ecs->ptid, &ecs->ws);
if (non_stop
&& ecs->ws.kind != TARGET_WAITKIND_IGNORE
thread. */
context_switch (ecs->ptid);
+ /* If an error happens while handling the event, propagate GDB's
+ knowledge of the executing state to the frontend/user running
+ state. */
+ if (!non_stop)
+ ts_old_chain = make_cleanup (finish_thread_state_cleanup, &minus_one_ptid);
+ else
+ ts_old_chain = make_cleanup (finish_thread_state_cleanup, &ecs->ptid);
+
/* Now figure out what to do with the result of the result. */
handle_inferior_event (ecs);
inferior_event_handler (INF_EXEC_COMPLETE, NULL);
}
+ /* No error, don't finish the thread states yet. */
+ discard_cleanups (ts_old_chain);
+
/* Revert thread and frame. */
do_cleanups (old_chain);
if (ecs->ws.value.sig != TARGET_SIGNAL_TRAP)
return;
+ /* In reverse execution, when a breakpoint is hit, the instruction
+ under it has already been de-executed. The reported PC always
+ points at the breakpoint address, so adjusting it further would
+ be wrong. E.g., consider this case on a decr_pc_after_break == 1
+ architecture:
+
+ B1 0x08000000 : INSN1
+ B2 0x08000001 : INSN2
+ 0x08000002 : INSN3
+ PC -> 0x08000003 : INSN4
+
+ Say you're stopped at 0x08000003 as above. Reverse continuing
+ from that point should hit B2 as below. Reading the PC when the
+ SIGTRAP is reported should read 0x08000001 and INSN2 should have
+ been de-executed already.
+
+ B1 0x08000000 : INSN1
+ B2 PC -> 0x08000001 : INSN2
+ 0x08000002 : INSN3
+ 0x08000003 : INSN4
+
+ We can't apply the same logic as for forward execution, because
+ we would wrongly adjust the PC to 0x08000000, since there's a
+ breakpoint at PC - 1. We'd then report a hit on B1, although
+ INSN1 hadn't been de-executed yet. Doing nothing is the correct
+ behaviour. */
+ if (execution_direction == EXEC_REVERSE)
+ return;
+
/* If this target does not decrement the PC after breakpoints, then
we have nothing to do. */
regcache = get_thread_regcache (ecs->ptid);
if (software_breakpoint_inserted_here_p (breakpoint_pc)
|| (non_stop && moribund_breakpoint_here_p (breakpoint_pc)))
{
+ struct cleanup *old_cleanups = NULL;
+ if (RECORD_IS_USED)
+ old_cleanups = record_gdb_operation_disable_set ();
+
/* When using hardware single-step, a SIGTRAP is reported for both
a completed single-step and a software breakpoint. Need to
differentiate between the two, as the latter needs adjusting
|| !currently_stepping (ecs->event_thread)
|| ecs->event_thread->prev_pc == breakpoint_pc)
regcache_write_pc (regcache, breakpoint_pc);
+
+ if (RECORD_IS_USED)
+ do_cleanups (old_cleanups);
}
}
&& ecs->ws.kind != TARGET_WAITKIND_SIGNALLED && ecs->new_thread_event)
add_thread (ecs->ptid);
- ecs->event_thread = find_thread_pid (ecs->ptid);
+ ecs->event_thread = find_thread_ptid (ecs->ptid);
/* Dependent on valid ECS->EVENT_THREAD. */
adjust_pc_after_break (ecs);
{
breakpoint_retire_moribund ();
- /* Mark the non-executing threads accordingly. */
- if (!non_stop
- || ecs->ws.kind == TARGET_WAITKIND_EXITED
- || ecs->ws.kind == TARGET_WAITKIND_SIGNALLED)
- set_executing (pid_to_ptid (-1), 0);
- else
- set_executing (ecs->ptid, 0);
+ /* Mark the non-executing threads accordingly. In all-stop, all
+ threads of all processes are stopped when we get any event
+ reported. In non-stop mode, only the event thread stops. If
+ we're handling a process exit in non-stop mode, there's
+ nothing to do, as threads of the dead process are gone, and
+ threads of any other process were left running. */
+ if (!non_stop)
+ set_executing (minus_one_ptid, 0);
+ else if (ecs->ws.kind != TARGET_WAITKIND_SIGNALLED
+ && ecs->ws.kind != TARGET_WAITKIND_EXITED)
+ set_executing (inferior_ptid, 0);
}
switch (infwait_state)
case TARGET_WAITKIND_EXITED:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_EXITED\n");
+ inferior_ptid = ecs->ptid;
target_terminal_ours (); /* Must do this before mourn anyway */
print_stop_reason (EXITED, ecs->ws.value.integer);
/* Record the exit code in the convenience variable $_exitcode, so
that the user can inspect this again later. */
- set_internalvar (lookup_internalvar ("_exitcode"),
- value_from_longest (builtin_type_int32,
- (LONGEST) ecs->ws.value.integer));
+ set_internalvar_integer (lookup_internalvar ("_exitcode"),
+ (LONGEST) ecs->ws.value.integer);
gdb_flush (gdb_stdout);
target_mourn_inferior ();
singlestep_breakpoints_inserted_p = 0;
case TARGET_WAITKIND_SIGNALLED:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SIGNALLED\n");
+ inferior_ptid = ecs->ptid;
stop_print_frame = 0;
target_terminal_ours (); /* Must do this before mourn anyway */
case TARGET_WAITKIND_VFORKED:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_FORKED\n");
- pending_follow.kind = ecs->ws.kind;
-
- pending_follow.fork_event.parent_pid = ecs->ptid;
- pending_follow.fork_event.child_pid = ecs->ws.value.related_pid;
if (!ptid_equal (ecs->ptid, inferior_ptid))
{
reinit_frame_cache ();
}
- stop_pc = read_pc ();
+ /* Immediately detach breakpoints from the child before there's
+ any chance of letting the user delete breakpoints from the
+ breakpoint lists. If we don't do this early, it's easy to
+ leave left over traps in the child, vis: "break foo; catch
+ fork; c; <fork>; del; c; <child calls foo>". We only follow
+ the fork on the last `continue', and by that time the
+ breakpoint at "foo" is long gone from the breakpoint table.
+ If we vforked, then we don't need to unpatch here, since both
+ parent and child are sharing the same memory pages; we'll
+ need to unpatch at follow/detach time instead to be certain
+ that new breakpoints added between catchpoint hit time and
+ vfork follow are detached. */
+ if (ecs->ws.kind != TARGET_WAITKIND_VFORKED)
+ {
+ int child_pid = ptid_get_pid (ecs->ws.value.related_pid);
+
+ /* This won't actually modify the breakpoint list, but will
+ physically remove the breakpoints from the child. */
+ detach_breakpoints (child_pid);
+ }
+
+ /* In case the event is caught by a catchpoint, remember that
+ the event is to be followed at the next resume of the thread,
+ and not immediately. */
+ ecs->event_thread->pending_follow = ecs->ws;
+
+ stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid));
ecs->event_thread->stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid);
/* If no catchpoint triggered for this, then keep going. */
if (ecs->random_signal)
{
+ int should_resume;
+
ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
- keep_going (ecs);
+
+ should_resume = follow_fork ();
+
+ ecs->event_thread = inferior_thread ();
+ ecs->ptid = inferior_ptid;
+
+ if (should_resume)
+ keep_going (ecs);
+ else
+ stop_stepping (ecs);
return;
}
ecs->event_thread->stop_signal = TARGET_SIGNAL_TRAP;
case TARGET_WAITKIND_EXECD:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_EXECD\n");
- pending_follow.execd_pathname =
- savestring (ecs->ws.value.execd_pathname,
- strlen (ecs->ws.value.execd_pathname));
if (!ptid_equal (ecs->ptid, inferior_ptid))
{
reinit_frame_cache ();
}
- stop_pc = read_pc ();
+ stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid));
/* This causes the eventpoints and symbol table to be reset.
Must do this now, before trying to determine whether to
stop. */
- follow_exec (inferior_ptid, pending_follow.execd_pathname);
- xfree (pending_follow.execd_pathname);
+ follow_exec (inferior_ptid, ecs->ws.value.execd_pathname);
ecs->event_thread->stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid);
ecs->random_signal = !bpstat_explains_signal (ecs->event_thread->stop_bpstat);
+ /* Note that this may be referenced from inside
+ bpstat_stop_status above, through inferior_has_execd. */
+ xfree (ecs->ws.value.execd_pathname);
+ ecs->ws.value.execd_pathname = NULL;
+
/* If no catchpoint triggered for this, then keep going. */
if (ecs->random_signal)
{
case TARGET_WAITKIND_NO_HISTORY:
/* Reverse execution: target ran out of history info. */
+ stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid));
print_stop_reason (NO_HISTORY, 0);
stop_stepping (ecs);
return;
return;
}
- /* Do we need to clean up the state of a thread that has completed a
- displaced single-step? (Doing so usually affects the PC, so do
- it here, before we set stop_pc.) */
if (ecs->ws.kind == TARGET_WAITKIND_STOPPED)
- displaced_step_fixup (ecs->ptid, ecs->event_thread->stop_signal);
+ {
+ /* Do we need to clean up the state of a thread that has
+ completed a displaced single-step? (Doing so usually affects
+ the PC, so do it here, before we set stop_pc.) */
+ displaced_step_fixup (ecs->ptid, ecs->event_thread->stop_signal);
+
+ /* If we either finished a single-step or hit a breakpoint, but
+ the user wanted this thread to be stopped, pretend we got a
+ SIG0 (generic unsignaled stop). */
+
+ if (ecs->event_thread->stop_requested
+ && ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP)
+ ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
+ }
stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid));
{
fprintf_unfiltered (gdb_stdlog, "infrun: stop_pc = 0x%s\n",
paddr_nz (stop_pc));
- if (STOPPED_BY_WATCHPOINT (&ecs->ws))
+ if (target_stopped_by_watchpoint ())
{
CORE_ADDR addr;
fprintf_unfiltered (gdb_stdlog, "infrun: stopped by watchpoint\n");
}
}
- stepping_past_singlestep_breakpoint = 0;
-
if (!ptid_equal (deferred_step_ptid, null_ptid))
{
/* In non-stop mode, there's never a deferred_step_ptid set. */
the fact that we were supposed to switch back. */
if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP)
{
- struct thread_info *tp;
-
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: handling deferred step\n");
stop_signal = ecs->event_thread->stop_signal;
ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
ecs->ptid = singlestep_ptid;
- ecs->event_thread = find_thread_pid (ecs->ptid);
+ ecs->event_thread = find_thread_ptid (ecs->ptid);
ecs->event_thread->stop_signal = stop_signal;
stop_pc = new_singlestep_pc;
}
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: thread_hop_needed\n");
+ /* Switch context before touching inferior memory, the
+ previous thread may have exited. */
+ if (!ptid_equal (inferior_ptid, ecs->ptid))
+ context_switch (ecs->ptid);
+
/* Saw a breakpoint, but it was hit by the wrong thread.
Just continue. */
error (_("Cannot step over breakpoint hit in wrong thread"));
else
{ /* Single step */
- if (!ptid_equal (inferior_ptid, ecs->ptid))
- context_switch (ecs->ptid);
-
if (!non_stop)
{
/* Only need to require the next event from this
/* If necessary, step over this watchpoint. We'll be back to display
it in a moment. */
if (stopped_by_watchpoint
- && (HAVE_STEPPABLE_WATCHPOINT
+ && (target_have_steppable_watchpoint
|| gdbarch_have_nonsteppable_watchpoint (current_gdbarch)))
{
/* At this point, we are stopped at an instruction which has
the inferior over it. If we have non-steppable watchpoints,
we must disable the current watchpoint; it's simplest to
disable all watchpoints and breakpoints. */
-
- if (!HAVE_STEPPABLE_WATCHPOINT)
+ int hw_step = 1;
+
+ if (!target_have_steppable_watchpoint)
remove_breakpoints ();
+ /* Single step */
+ hw_step = maybe_software_singlestep (current_gdbarch, stop_pc);
+ target_resume (ecs->ptid, hw_step, TARGET_SIGNAL_0);
registers_changed ();
- target_resume (ecs->ptid, 1, TARGET_SIGNAL_0); /* Single step */
waiton_ptid = ecs->ptid;
- if (HAVE_STEPPABLE_WATCHPOINT)
+ if (target_have_steppable_watchpoint)
infwait_state = infwait_step_watch_state;
else
infwait_state = infwait_nonstep_watch_state;
SIGTRAP. Some systems (e.g. Windows), and stubs supporting
target extended-remote report it instead of a SIGSTOP
(e.g. gdbserver). We already rely on SIGTRAP being our
- signal, so this is no exception. */
+ signal, so this is no exception.
+
+ Also consider that the attach is complete when we see a
+ TARGET_SIGNAL_0. In non-stop mode, GDB will explicitly tell
+ the target to stop all threads of the inferior, in case the
+ low level attach operation doesn't stop them implicitly. If
+ they weren't stopped implicitly, then the stub will report a
+ TARGET_SIGNAL_0, meaning: stopped for no particular reason
+ other than GDB's request. */
if (stop_soon == STOP_QUIETLY_NO_SIGSTOP
&& (ecs->event_thread->stop_signal == TARGET_SIGNAL_STOP
- || ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP))
+ || ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP
+ || ecs->event_thread->stop_signal == TARGET_SIGNAL_0))
{
stop_stepping (ecs);
ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
target_terminal_ours_for_output ();
print_stop_reason (SIGNAL_RECEIVED, ecs->event_thread->stop_signal);
}
- /* Always stop on signals if we're just gaining control of the
- program. */
+ /* Always stop on signals if we're either just gaining control
+ of the program, or the user explicitly requested this thread
+ to remain stopped. */
if (stop_soon != NO_STOP_QUIETLY
+ || ecs->event_thread->stop_requested
|| signal_stop_state (ecs->event_thread->stop_signal))
{
stop_stepping (ecs);
if (signal_program[ecs->event_thread->stop_signal] == 0)
ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
- if (ecs->event_thread->prev_pc == read_pc ()
+ if (ecs->event_thread->prev_pc == stop_pc
&& ecs->event_thread->trap_expected
&& ecs->event_thread->step_resume_breakpoint == NULL)
{
break;
case BPSTAT_WHAT_CHECK_SHLIBS:
- case BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK:
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_CHECK_SHLIBS\n");
stop_stepping (ecs);
return;
}
-
- /* If we stopped due to an explicit catchpoint, then the
- (see above) call to SOLIB_ADD pulled in any symbols
- from a newly-loaded library, if appropriate.
-
- We do want the inferior to stop, but not where it is
- now, which is in the dynamic linker callback. Rather,
- we would like it stop in the user's program, just after
- the call that caused this catchpoint to trigger. That
- gives the user a more useful vantage from which to
- examine their program's state. */
- else if (what.main_action
- == BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK)
- {
- /* ??rehrauer: If I could figure out how to get the
- right return PC from here, we could just set a temp
- breakpoint and resume. I'm not sure we can without
- cracking open the dld's shared libraries and sniffing
- their unwind tables and text/data ranges, and that's
- not a terribly portable notion.
-
- Until that time, we must step the inferior out of the
- dld callback, and also out of the dld itself (and any
- code or stubs in libdld.sl, such as "shl_load" and
- friends) until we reach non-dld code. At that point,
- we can stop stepping. */
- bpstat_get_triggered_catchpoints (ecs->event_thread->stop_bpstat,
- &ecs->
- event_thread->
- stepping_through_solib_catchpoints);
- ecs->event_thread->stepping_through_solib_after_catch = 1;
-
- /* Be sure to lift all breakpoints, so the inferior does
- actually step past this point... */
- ecs->event_thread->stepping_over_breakpoint = 1;
- break;
- }
else
{
/* We want to step over this breakpoint, then keep going. */
test for stepping. But, if not stepping,
do not stop. */
+ /* In all-stop mode, if we're currently stepping but have stopped in
+ some other thread, we need to switch back to the stepped thread. */
+ if (!non_stop)
+ {
+ struct thread_info *tp;
+ tp = iterate_over_threads (currently_stepping_or_nexting_callback,
+ ecs->event_thread);
+ if (tp)
+ {
+ /* However, if the current thread is blocked on some internal
+ breakpoint, and we simply need to step over that breakpoint
+ to get it going again, do that first. */
+ if ((ecs->event_thread->trap_expected
+ && ecs->event_thread->stop_signal != TARGET_SIGNAL_TRAP)
+ || ecs->event_thread->stepping_over_breakpoint)
+ {
+ keep_going (ecs);
+ return;
+ }
+
+ /* If the stepping thread exited, then don't try reverting
+ back to it, just keep going. We need to query the target
+ in case it doesn't support thread exit events. */
+ if (is_exited (tp->ptid)
+ || !target_thread_alive (tp->ptid))
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "\
+infrun: not switching back to stepped thread, it has vanished\n");
+
+ delete_thread (tp->ptid);
+ keep_going (ecs);
+ return;
+ }
+
+ /* Otherwise, we no longer expect a trap in the current thread.
+ Clear the trap_expected flag before switching back -- this is
+ what keep_going would do as well, if we called it. */
+ ecs->event_thread->trap_expected = 0;
+
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: switching back to stepped thread\n");
+
+ ecs->event_thread = tp;
+ ecs->ptid = tp->ptid;
+ context_switch (ecs->ptid);
+ keep_going (ecs);
+ return;
+ }
+ }
+
/* Are we stepping to get the inferior out of the dynamic linker's
hook (and possibly the dld itself) after catching a shlib
event? */
Reverse (backward) execution. set the step-resume
breakpoint at the start of the function that we just
stepped into (backwards), and continue to there. When we
- get there, we'll need to single-step back to the
- caller. */
+ get there, we'll need to single-step back to the caller. */
if (execution_direction == EXEC_REVERSE)
{
struct symtab_and_line sr_sal;
+
+ if (ecs->stop_func_start == 0
+ && in_solib_dynsym_resolve_code (stop_pc))
+ {
+ /* Stepped into runtime loader dynamic symbol
+ resolution code. Since we're in reverse,
+ we have already backed up through the runtime
+ loader and the dynamic function. This is just
+ the trampoline (jump table).
+
+ Just keep stepping, we'll soon be home.
+ */
+ keep_going (ecs);
+ return;
+ }
+ /* Normal (staticly linked) function call return. */
init_sal (&sr_sal);
sr_sal.pc = ecs->stop_func_start;
insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
keep_going (ecs);
}
-/* Are we in the middle of stepping? */
+/* Is thread TP in the middle of single-stepping? */
static int
currently_stepping (struct thread_info *tp)
{
- return (((tp->step_range_end && tp->step_resume_breakpoint == NULL)
- || tp->trap_expected)
- || tp->stepping_through_solib_after_catch
- || bpstat_should_step ());
+ return ((tp->step_range_end && tp->step_resume_breakpoint == NULL)
+ || tp->trap_expected
+ || tp->stepping_through_solib_after_catch
+ || bpstat_should_step ());
+}
+
+/* Returns true if any thread *but* the one passed in "data" is in the
+ middle of stepping or of handling a "next". */
+
+static int
+currently_stepping_or_nexting_callback (struct thread_info *tp, void *data)
+{
+ if (tp == data)
+ return 0;
+
+ return (tp->step_range_end
+ || tp->trap_expected
+ || tp->stepping_through_solib_after_catch);
}
/* Inferior has stepped into a subroutine call with source code that
keep_going (struct execution_control_state *ecs)
{
/* Save the pc before execution, to compare with pc after stop. */
- ecs->event_thread->prev_pc = read_pc (); /* Might have been DECR_AFTER_BREAK */
+ ecs->event_thread->prev_pc
+ = regcache_read_pc (get_thread_regcache (ecs->ptid));
/* If we did not do break;, it means we should keep running the
inferior and not return to debugger. */
return_child_result_value = stop_info;
break;
case SIGNAL_RECEIVED:
- /* Signal received. The signal table tells us to print about
- it. */
+ /* Signal received. The signal table tells us to print about
+ it. */
annotate_signal ();
- ui_out_text (uiout, "\nProgram received signal ");
- annotate_signal_name ();
- if (ui_out_is_mi_like_p (uiout))
- ui_out_field_string
- (uiout, "reason", async_reason_lookup (EXEC_ASYNC_SIGNAL_RECEIVED));
- ui_out_field_string (uiout, "signal-name",
- target_signal_to_name (stop_info));
- annotate_signal_name_end ();
- ui_out_text (uiout, ", ");
- annotate_signal_string ();
- ui_out_field_string (uiout, "signal-meaning",
- target_signal_to_string (stop_info));
- annotate_signal_string_end ();
+
+ if (stop_info == TARGET_SIGNAL_0 && !ui_out_is_mi_like_p (uiout))
+ {
+ struct thread_info *t = inferior_thread ();
+
+ ui_out_text (uiout, "\n[");
+ ui_out_field_string (uiout, "thread-name",
+ target_pid_to_str (t->ptid));
+ ui_out_field_fmt (uiout, "thread-id", "] #%d", t->num);
+ ui_out_text (uiout, " stopped");
+ }
+ else
+ {
+ ui_out_text (uiout, "\nProgram received signal ");
+ annotate_signal_name ();
+ if (ui_out_is_mi_like_p (uiout))
+ ui_out_field_string
+ (uiout, "reason", async_reason_lookup (EXEC_ASYNC_SIGNAL_RECEIVED));
+ ui_out_field_string (uiout, "signal-name",
+ target_signal_to_name (stop_info));
+ annotate_signal_name_end ();
+ ui_out_text (uiout, ", ");
+ annotate_signal_string ();
+ ui_out_field_string (uiout, "signal-meaning",
+ target_signal_to_string (stop_info));
+ annotate_signal_string_end ();
+ }
ui_out_text (uiout, ".\n");
break;
case NO_HISTORY:
{
struct target_waitstatus last;
ptid_t last_ptid;
+ struct cleanup *old_chain = make_cleanup (null_cleanup, NULL);
get_last_target_status (&last_ptid, &last);
+ /* If an exception is thrown from this point on, make sure to
+ propagate GDB's knowledge of the executing state to the
+ frontend/user running state. A QUIT is an easy exception to see
+ here, so do this before any filtered output. */
+ if (target_has_execution)
+ {
+ if (!non_stop)
+ make_cleanup (finish_thread_state_cleanup, &minus_one_ptid);
+ else if (last.kind != TARGET_WAITKIND_SIGNALLED
+ && last.kind != TARGET_WAITKIND_EXITED)
+ make_cleanup (finish_thread_state_cleanup, &inferior_ptid);
+ }
+
/* In non-stop mode, we don't want GDB to switch threads behind the
user's back, to avoid races where the user is typing a command to
apply to thread x, but GDB switches to thread y before the user
previous_inferior_ptid = inferior_ptid;
}
- /* NOTE drow/2004-01-17: Is this still necessary? */
- /* Make sure that the current_frame's pc is correct. This
- is a correction for setting up the frame info before doing
- gdbarch_decr_pc_after_break */
- if (target_has_execution)
- /* FIXME: cagney/2002-12-06: Has the PC changed? Thanks to
- gdbarch_decr_pc_after_break, the program counter can change. Ask the
- frame code to check for this and sort out any resultant mess.
- gdbarch_decr_pc_after_break needs to just go away. */
- deprecated_update_frame_pc_hack (get_current_frame (), read_pc ());
-
if (!breakpoints_always_inserted_mode () && target_has_execution)
{
if (remove_breakpoints ())
target_terminal_ours_for_output ();
printf_filtered (_("\
Cannot remove breakpoints because program is no longer writable.\n\
-It might be running in another process.\n\
Further execution is probably impossible.\n"));
}
}
/* Set the current source location. This will also happen if we
display the frame below, but the current SAL will be incorrect
during a user hook-stop function. */
- if (target_has_stack && !stop_stack_dummy)
+ if (has_stack_frames () && !stop_stack_dummy)
set_current_sal_from_frame (get_current_frame (), 1);
- if (!target_has_stack)
+ /* Let the user/frontend see the threads as stopped. */
+ do_cleanups (old_chain);
+
+ /* Look up the hook_stop and run it (CLI internally handles problem
+ of stop_command's pre-hook not existing). */
+ if (stop_command)
+ catch_errors (hook_stop_stub, stop_command,
+ "Error while running hook_stop:\n", RETURN_MASK_ALL);
+
+ if (!has_stack_frames ())
goto done;
if (last.kind == TARGET_WAITKIND_SIGNALLED
internal_error (__FILE__, __LINE__, _("Unknown value."));
}
- if (ui_out_is_mi_like_p (uiout))
- {
-
- ui_out_field_int (uiout, "thread-id",
- pid_to_thread_id (inferior_ptid));
- if (non_stop)
- {
- struct cleanup *back_to = make_cleanup_ui_out_list_begin_end
- (uiout, "stopped-threads");
- ui_out_field_int (uiout, NULL,
- pid_to_thread_id (inferior_ptid));
- do_cleanups (back_to);
- }
- else
- ui_out_field_string (uiout, "stopped-threads", "all");
- }
/* The behavior of this routine with respect to the source
flag is:
SRC_LINE: Print only source line
if (stop_stack_dummy)
{
- /* Pop the empty frame that contains the stack dummy. POP_FRAME
- ends with a setting of the current frame, so we can use that
- next. */
- frame_pop (get_current_frame ());
- /* Set stop_pc to what it was before we called the function.
- Can't rely on restore_inferior_status because that only gets
- called if we don't stop in the called function. */
- stop_pc = read_pc ();
+ /* Pop the empty frame that contains the stack dummy.
+ This also restores inferior state prior to the call
+ (struct inferior_thread_state). */
+ struct frame_info *frame = get_current_frame ();
+ gdb_assert (get_frame_type (frame) == DUMMY_FRAME);
+ frame_pop (frame);
+ /* frame_pop() calls reinit_frame_cache as the last thing it does
+ which means there's currently no selected frame. We don't need
+ to re-establish a selected frame if the dummy call returns normally,
+ that will be done by restore_inferior_status. However, we do have
+ to handle the case where the dummy call is returning after being
+ stopped (e.g. the dummy call previously hit a breakpoint). We
+ can't know which case we have so just always re-establish a
+ selected frame here. */
select_frame (get_current_frame ());
}
done:
annotate_stopped ();
- if (!suppress_stop_observer
- && !(target_has_execution
- && last.kind != TARGET_WAITKIND_SIGNALLED
- && last.kind != TARGET_WAITKIND_EXITED
- && inferior_thread ()->step_multi))
+
+ /* Suppress the stop observer if we're in the middle of:
+
+ - a step n (n > 1), as there still more steps to be done.
+
+ - a "finish" command, as the observer will be called in
+ finish_command_continuation, so it can include the inferior
+ function's return value.
+
+ - calling an inferior function, as we pretend we inferior didn't
+ run at all. The return value of the call is handled by the
+ expression evaluator, through call_function_by_hand. */
+
+ if (!target_has_execution
+ || last.kind == TARGET_WAITKIND_SIGNALLED
+ || last.kind == TARGET_WAITKIND_EXITED
+ || (!inferior_thread ()->step_multi
+ && !(inferior_thread ()->stop_bpstat
+ && inferior_thread ()->proceed_to_finish)
+ && !inferior_thread ()->in_infcall))
{
if (!ptid_equal (inferior_ptid, null_ptid))
- observer_notify_normal_stop (inferior_thread ()->stop_bpstat);
+ observer_notify_normal_stop (inferior_thread ()->stop_bpstat,
+ stop_print_frame);
else
- observer_notify_normal_stop (NULL);
+ observer_notify_normal_stop (NULL, stop_print_frame);
}
- if (target_has_execution
- && last.kind != TARGET_WAITKIND_SIGNALLED
- && last.kind != TARGET_WAITKIND_EXITED)
- {
- /* Delete the breakpoint we stopped at, if it wants to be deleted.
- Delete any breakpoint that is to be deleted at the next stop. */
- breakpoint_auto_delete (inferior_thread ()->stop_bpstat);
- if (!non_stop)
- set_running (pid_to_ptid (-1), 0);
- else
- set_running (inferior_ptid, 0);
+ if (target_has_execution)
+ {
+ if (last.kind != TARGET_WAITKIND_SIGNALLED
+ && last.kind != TARGET_WAITKIND_EXITED)
+ /* Delete the breakpoint we stopped at, if it wants to be deleted.
+ Delete any breakpoint that is to be deleted at the next stop. */
+ breakpoint_auto_delete (inferior_thread ()->stop_bpstat);
}
-
- /* Look up the hook_stop and run it (CLI internally handles problem
- of stop_command's pre-hook not existing). */
- if (stop_command)
- catch_errors (hook_stop_stub, stop_command,
- "Error while running hook_stop:\n", RETURN_MASK_ALL);
-
}
static int
static void
sig_print_info (enum target_signal oursig)
{
- char *name = target_signal_to_name (oursig);
+ const char *name = target_signal_to_name (oursig);
int name_padding = 13 - strlen (name);
if (name_padding <= 0)
case TARGET_SIGNAL_INT:
if (!allsigs && !sigs[signum])
{
- if (query ("%s is used by the debugger.\n\
-Are you sure you want to change it? ", target_signal_to_name ((enum target_signal) signum)))
+ if (query (_("%s is used by the debugger.\n\
+Are you sure you want to change it? "), target_signal_to_name ((enum target_signal) signum)))
{
sigs[signum] = 1;
}
argv++;
}
- target_notice_signals (inferior_ptid);
+ for (signum = 0; signum < nsigs; signum++)
+ if (sigs[signum])
+ {
+ target_notice_signals (inferior_ptid);
- if (from_tty)
- {
- /* Show the results. */
- sig_print_header ();
- for (signum = 0; signum < nsigs; signum++)
- {
- if (sigs[signum])
- {
- sig_print_info (signum);
- }
- }
- }
+ if (from_tty)
+ {
+ /* Show the results. */
+ sig_print_header ();
+ for (; signum < nsigs; signum++)
+ if (sigs[signum])
+ sig_print_info (signum);
+ }
+
+ break;
+ }
do_cleanups (old_chain);
}
printf_filtered (_("\nUse the \"handle\" command to change these tables.\n"));
}
+
+/* The $_siginfo convenience variable is a bit special. We don't know
+ for sure the type of the value until we actually have a chance to
+ fetch the data. The type can change depending on gdbarch, so it it
+ also dependent on which thread you have selected.
+
+ 1. making $_siginfo be an internalvar that creates a new value on
+ access.
+
+ 2. making the value of $_siginfo be an lval_computed value. */
+
+/* This function implements the lval_computed support for reading a
+ $_siginfo value. */
+
+static void
+siginfo_value_read (struct value *v)
+{
+ LONGEST transferred;
+
+ transferred =
+ target_read (¤t_target, TARGET_OBJECT_SIGNAL_INFO,
+ NULL,
+ value_contents_all_raw (v),
+ value_offset (v),
+ TYPE_LENGTH (value_type (v)));
+
+ if (transferred != TYPE_LENGTH (value_type (v)))
+ error (_("Unable to read siginfo"));
+}
+
+/* This function implements the lval_computed support for writing a
+ $_siginfo value. */
+
+static void
+siginfo_value_write (struct value *v, struct value *fromval)
+{
+ LONGEST transferred;
+
+ transferred = target_write (¤t_target,
+ TARGET_OBJECT_SIGNAL_INFO,
+ NULL,
+ value_contents_all_raw (fromval),
+ value_offset (v),
+ TYPE_LENGTH (value_type (fromval)));
+
+ if (transferred != TYPE_LENGTH (value_type (fromval)))
+ error (_("Unable to write siginfo"));
+}
+
+static struct lval_funcs siginfo_value_funcs =
+ {
+ siginfo_value_read,
+ siginfo_value_write
+ };
+
+/* Return a new value with the correct type for the siginfo object of
+ the current thread. Return a void value if there's no object
+ available. */
+
+static struct value *
+siginfo_make_value (struct internalvar *var)
+{
+ struct type *type;
+ struct gdbarch *gdbarch;
+
+ if (target_has_stack
+ && !ptid_equal (inferior_ptid, null_ptid))
+ {
+ gdbarch = get_frame_arch (get_current_frame ());
+
+ if (gdbarch_get_siginfo_type_p (gdbarch))
+ {
+ type = gdbarch_get_siginfo_type (gdbarch);
+
+ return allocate_computed_value (type, &siginfo_value_funcs, NULL);
+ }
+ }
+
+ return allocate_value (builtin_type_void);
+}
+
\f
-struct inferior_status
+/* Inferior thread state.
+ These are details related to the inferior itself, and don't include
+ things like what frame the user had selected or what gdb was doing
+ with the target at the time.
+ For inferior function calls these are things we want to restore
+ regardless of whether the function call successfully completes
+ or the dummy frame has to be manually popped. */
+
+struct inferior_thread_state
{
enum target_signal stop_signal;
CORE_ADDR stop_pc;
+ struct regcache *registers;
+};
+
+struct inferior_thread_state *
+save_inferior_thread_state (void)
+{
+ struct inferior_thread_state *inf_state = XMALLOC (struct inferior_thread_state);
+ struct thread_info *tp = inferior_thread ();
+
+ inf_state->stop_signal = tp->stop_signal;
+ inf_state->stop_pc = stop_pc;
+
+ inf_state->registers = regcache_dup (get_current_regcache ());
+
+ return inf_state;
+}
+
+/* Restore inferior session state to INF_STATE. */
+
+void
+restore_inferior_thread_state (struct inferior_thread_state *inf_state)
+{
+ struct thread_info *tp = inferior_thread ();
+
+ tp->stop_signal = inf_state->stop_signal;
+ stop_pc = inf_state->stop_pc;
+
+ /* The inferior can be gone if the user types "print exit(0)"
+ (and perhaps other times). */
+ if (target_has_execution)
+ /* NB: The register write goes through to the target. */
+ regcache_cpy (get_current_regcache (), inf_state->registers);
+ regcache_xfree (inf_state->registers);
+ xfree (inf_state);
+}
+
+static void
+do_restore_inferior_thread_state_cleanup (void *state)
+{
+ restore_inferior_thread_state (state);
+}
+
+struct cleanup *
+make_cleanup_restore_inferior_thread_state (struct inferior_thread_state *inf_state)
+{
+ return make_cleanup (do_restore_inferior_thread_state_cleanup, inf_state);
+}
+
+void
+discard_inferior_thread_state (struct inferior_thread_state *inf_state)
+{
+ regcache_xfree (inf_state->registers);
+ xfree (inf_state);
+}
+
+struct regcache *
+get_inferior_thread_state_regcache (struct inferior_thread_state *inf_state)
+{
+ return inf_state->registers;
+}
+
+/* Session related state for inferior function calls.
+ These are the additional bits of state that need to be restored
+ when an inferior function call successfully completes. */
+
+struct inferior_status
+{
bpstat stop_bpstat;
int stop_step;
int stop_stack_dummy;
int stop_after_trap;
int stop_soon;
- /* These are here because if call_function_by_hand has written some
- registers and then decides to call error(), we better not have changed
- any registers. */
- struct regcache *registers;
-
- /* A frame unique identifier. */
+ /* ID if the selected frame when the inferior function call was made. */
struct frame_id selected_frame_id;
- int breakpoint_proceeded;
- int restore_stack_info;
int proceed_to_finish;
+ int in_infcall;
};
-void
-write_inferior_status_register (struct inferior_status *inf_status, int regno,
- LONGEST val)
-{
- int size = register_size (current_gdbarch, regno);
- void *buf = alloca (size);
- store_signed_integer (buf, size, val);
- regcache_raw_write (inf_status->registers, regno, buf);
-}
-
/* Save all of the information associated with the inferior<==>gdb
- connection. INF_STATUS is a pointer to a "struct inferior_status"
- (defined in inferior.h). */
+ connection. */
struct inferior_status *
-save_inferior_status (int restore_stack_info)
+save_inferior_status (void)
{
struct inferior_status *inf_status = XMALLOC (struct inferior_status);
struct thread_info *tp = inferior_thread ();
struct inferior *inf = current_inferior ();
- inf_status->stop_signal = tp->stop_signal;
- inf_status->stop_pc = stop_pc;
inf_status->stop_step = tp->stop_step;
inf_status->stop_stack_dummy = stop_stack_dummy;
inf_status->stopped_by_random_signal = stopped_by_random_signal;
called. */
inf_status->stop_bpstat = tp->stop_bpstat;
tp->stop_bpstat = bpstat_copy (tp->stop_bpstat);
- inf_status->breakpoint_proceeded = breakpoint_proceeded;
- inf_status->restore_stack_info = restore_stack_info;
inf_status->proceed_to_finish = tp->proceed_to_finish;
-
- inf_status->registers = regcache_dup (get_current_regcache ());
+ inf_status->in_infcall = tp->in_infcall;
inf_status->selected_frame_id = get_frame_id (get_selected_frame (NULL));
+
return inf_status;
}
return (1);
}
+/* Restore inferior session state to INF_STATUS. */
+
void
restore_inferior_status (struct inferior_status *inf_status)
{
struct thread_info *tp = inferior_thread ();
struct inferior *inf = current_inferior ();
- tp->stop_signal = inf_status->stop_signal;
- stop_pc = inf_status->stop_pc;
tp->stop_step = inf_status->stop_step;
stop_stack_dummy = inf_status->stop_stack_dummy;
stopped_by_random_signal = inf_status->stopped_by_random_signal;
inf->stop_soon = inf_status->stop_soon;
bpstat_clear (&tp->stop_bpstat);
tp->stop_bpstat = inf_status->stop_bpstat;
- breakpoint_proceeded = inf_status->breakpoint_proceeded;
+ inf_status->stop_bpstat = NULL;
tp->proceed_to_finish = inf_status->proceed_to_finish;
+ tp->in_infcall = inf_status->in_infcall;
- /* The inferior can be gone if the user types "print exit(0)"
- (and perhaps other times). */
- if (target_has_execution)
- /* NB: The register write goes through to the target. */
- regcache_cpy (get_current_regcache (), inf_status->registers);
- regcache_xfree (inf_status->registers);
-
- /* FIXME: If we are being called after stopping in a function which
- is called from gdb, we should not be trying to restore the
- selected frame; it just prints a spurious error message (The
- message is useful, however, in detecting bugs in gdb (like if gdb
- clobbers the stack)). In fact, should we be restoring the
- inferior status at all in that case? . */
-
- if (target_has_stack && inf_status->restore_stack_info)
+ if (target_has_stack)
{
/* The point of catch_errors is that if the stack is clobbered,
walking the stack might encounter a garbage pointer and
/* Error in restoring the selected frame. Select the innermost
frame. */
select_frame (get_current_frame ());
-
}
xfree (inf_status);
{
/* See save_inferior_status for info on stop_bpstat. */
bpstat_clear (&inf_status->stop_bpstat);
- regcache_xfree (inf_status->registers);
xfree (inf_status);
}
-
+\f
int
inferior_has_forked (ptid_t pid, ptid_t *child_pid)
{
&& ptid1.tid == ptid2.tid);
}
+/* Returns true if PTID represents a process. */
+
+int
+ptid_is_pid (ptid_t ptid)
+{
+ if (ptid_equal (minus_one_ptid, ptid))
+ return 0;
+ if (ptid_equal (null_ptid, ptid))
+ return 0;
+
+ return (ptid_get_lwp (ptid) == 0 && ptid_get_tid (ptid) == 0);
+}
+
/* restore_inferior_ptid() will be used by the cleanup machinery
to restore the inferior_ptid value saved in a call to
save_inferior_ptid(). */
show_step_stop_if_no_debug,
&setlist, &showlist);
- add_setshow_boolean_cmd ("can-use-displaced-stepping", class_maintenance,
- &can_use_displaced_stepping, _("\
+ add_setshow_enum_cmd ("displaced-stepping", class_run,
+ can_use_displaced_stepping_enum,
+ &can_use_displaced_stepping, _("\
Set debugger's willingness to use displaced stepping."), _("\
Show debugger's willingness to use displaced stepping."), _("\
-If zero, gdb will not use displaced stepping to step over\n\
-breakpoints, even if such is supported by the target."),
- NULL,
- show_can_use_displaced_stepping,
- &maintenance_set_cmdlist,
- &maintenance_show_cmdlist);
+If on, gdb will use displaced stepping to step over breakpoints if it is\n\
+supported by the target architecture. If off, gdb will not use displaced\n\
+stepping to step over breakpoints, even if such is supported by the target\n\
+architecture. If auto (which is the default), gdb will use displaced stepping\n\
+if the target architecture supports it and non-stop mode is active, but will not\n\
+use it in all-stop mode (see help set non-stop)."),
+ NULL,
+ show_can_use_displaced_stepping,
+ &setlist, &showlist);
add_setshow_enum_cmd ("exec-direction", class_run, exec_direction_names,
&exec_direction, _("Set direction of execution.\n\
displaced_step_ptid = null_ptid;
observer_attach_thread_ptid_changed (infrun_thread_ptid_changed);
+ observer_attach_thread_stop_requested (infrun_thread_stop_requested);
+ observer_attach_thread_exit (infrun_thread_thread_exit);
+
+ /* Explicitly create without lookup, since that tries to create a
+ value with a void typed value, and when we get here, gdbarch
+ isn't initialized yet. At this point, we're quite sure there
+ isn't another convenience variable of the same name. */
+ create_internalvar_type_lazy ("_siginfo", siginfo_make_value);
}
projects / deliverable / binutils-gdb.git / blobdiff