/* Target-struct-independent code to start (run) and stop an inferior
process.
- Copyright (C) 1986-2012 Free Software Foundation, Inc.
+ Copyright (C) 1986-2013 Free Software Foundation, Inc.
This file is part of GDB.
#include "mi/mi-common.h"
#include "event-top.h"
#include "record.h"
+#include "record-full.h"
#include "inline-frame.h"
#include "jit.h"
#include "tracepoint.h"
#include "continuations.h"
#include "interps.h"
#include "skip.h"
+#include "probe.h"
+#include "objfiles.h"
+#include "completer.h"
+#include "target-descriptions.h"
/* Prototypes for local functions */
static void handle_command (char *, int);
-static void sig_print_info (enum target_signal);
+static void sig_print_info (enum gdb_signal);
static void sig_print_header (void);
static void print_exited_reason (int exitstatus);
-static void print_signal_exited_reason (enum target_signal siggnal);
+static void print_signal_exited_reason (enum gdb_signal siggnal);
static void print_no_history_reason (void);
-static void print_signal_received_reason (enum target_signal siggnal);
+static void print_signal_received_reason (enum gdb_signal siggnal);
static void print_end_stepping_range_reason (void);
fprintf_filtered (file, _("Displace stepping debugging is %s.\n"), value);
}
-int debug_infrun = 0;
+unsigned int debug_infrun = 0;
static void
show_debug_infrun (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
static unsigned char *signal_print;
static unsigned char *signal_program;
+/* Table of signals that are registered with "catch signal". A
+ non-zero entry indicates that the signal is caught by some "catch
+ signal" command. This has size GDB_SIGNAL_LAST, to accommodate all
+ signals. */
+static unsigned char *signal_catch;
+
/* Table of signals that the target may silently handle.
This is automatically determined from the flags above,
and simply cached here. */
(flags)[signum] = 0; \
} while (0)
+/* Update the target's copy of SIGNAL_PROGRAM. The sole purpose of
+ this function is to avoid exporting `signal_program'. */
+
+void
+update_signals_program_target (void)
+{
+ target_program_signals ((int) GDB_SIGNAL_LAST, signal_program);
+}
+
/* Value to pass to target_resume() to cause all threads to resume. */
#define RESUME_ALL minus_one_ptid
void init_thread_stepping_state (struct thread_info *tss);
-void init_infwait_state (void);
+static void init_infwait_state (void);
static const char follow_fork_mode_child[] = "child";
static const char follow_fork_mode_parent[] = "parent";
&& is_running (thread->ptid)
&& !is_executing (thread->ptid)
&& !thread->stop_requested
- && thread->suspend.stop_signal == TARGET_SIGNAL_0)
+ && thread->suspend.stop_signal == GDB_SIGNAL_0)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
switch_to_thread (thread->ptid);
clear_proceed_status ();
- proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
+ proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT, 0);
}
return 0;
/* follow-fork child, detach-on-fork on. */
- old_chain = make_cleanup_restore_current_thread ();
+ inf->vfork_parent->pending_detach = 0;
+
+ if (!exec)
+ {
+ /* If we're handling a child exit, then inferior_ptid
+ points at the inferior's pid, not to a thread. */
+ old_chain = save_inferior_ptid ();
+ save_current_program_space ();
+ save_current_inferior ();
+ }
+ else
+ old_chain = save_current_space_and_thread ();
/* We're letting loose of the parent. */
tp = any_live_thread_of_process (inf->vfork_parent->pid);
pspace = add_program_space (maybe_new_address_space ());
set_current_program_space (pspace);
inf->removable = 1;
+ inf->symfile_flags = SYMFILE_NO_READ;
clone_program_space (pspace, inf->vfork_parent->pspace);
inf->pspace = pspace;
inf->aspace = pspace->aspace;
}
}
-/* Enum strings for "set|show displaced-stepping". */
+/* Enum strings for "set|show follow-exec-mode". */
static const char follow_exec_mode_new[] = "new";
static const char follow_exec_mode_same[] = "same";
set_current_inferior (inf);
set_current_program_space (pspace);
}
+ else
+ {
+ /* The old description may no longer be fit for the new image.
+ E.g, a 64-bit process exec'ed a 32-bit process. Clear the
+ old description; we'll read a new one below. No need to do
+ this on "follow-exec-mode new", as the old inferior stays
+ around (its description is later cleared/refetched on
+ restart). */
+ target_clear_description ();
+ }
gdb_assert (current_program_space == inf->pspace);
solib_create_inferior_hook below. breakpoint_re_set would fail to insert
the breakpoints with the zero displacement. */
- symbol_file_add (execd_pathname, SYMFILE_MAINLINE | SYMFILE_DEFER_BP_RESET,
+ symbol_file_add (execd_pathname,
+ (inf->symfile_flags
+ | SYMFILE_MAINLINE | SYMFILE_DEFER_BP_RESET),
NULL, 0);
- set_initial_language ();
+ if ((inf->symfile_flags & SYMFILE_NO_READ) == 0)
+ set_initial_language ();
+
+ /* If the target can specify a description, read it. Must do this
+ after flipping to the new executable (because the target supplied
+ description must be compatible with the executable's
+ architecture, and the old executable may e.g., be 32-bit, while
+ the new one 64-bit), and before anything involving memory or
+ registers. */
+ target_find_description ();
-#ifdef SOLIB_CREATE_INFERIOR_HOOK
- SOLIB_CREATE_INFERIOR_HOOK (PIDGET (inferior_ptid));
-#else
solib_create_inferior_hook (0);
-#endif
jit_inferior_created_hook ();
remove_displaced_stepping_state (inf->pid);
}
-/* Enum strings for "set|show displaced-stepping". */
-
-static const char can_use_displaced_stepping_auto[] = "auto";
-static const char can_use_displaced_stepping_on[] = "on";
-static const char can_use_displaced_stepping_off[] = "off";
-static const char *const can_use_displaced_stepping_enum[] =
-{
- can_use_displaced_stepping_auto,
- can_use_displaced_stepping_on,
- can_use_displaced_stepping_off,
- NULL,
-};
-
/* If ON, and the architecture supports it, GDB will use displaced
stepping to step over breakpoints. If OFF, or if the architecture
doesn't support it, GDB will instead use the traditional
which of all-stop or non-stop mode is active --- displaced stepping
in non-stop mode; hold-and-step in all-stop mode. */
-static const char *can_use_displaced_stepping =
- can_use_displaced_stepping_auto;
+static enum auto_boolean can_use_displaced_stepping = AUTO_BOOLEAN_AUTO;
static void
show_can_use_displaced_stepping (struct ui_file *file, int from_tty,
struct cmd_list_element *c,
const char *value)
{
- if (can_use_displaced_stepping == can_use_displaced_stepping_auto)
+ if (can_use_displaced_stepping == AUTO_BOOLEAN_AUTO)
fprintf_filtered (file,
_("Debugger's willingness to use displaced stepping "
"to step over breakpoints is %s (currently %s).\n"),
static int
use_displaced_stepping (struct gdbarch *gdbarch)
{
- return (((can_use_displaced_stepping == can_use_displaced_stepping_auto
- && non_stop)
- || can_use_displaced_stepping == can_use_displaced_stepping_on)
+ return (((can_use_displaced_stepping == AUTO_BOOLEAN_AUTO && non_stop)
+ || can_use_displaced_stepping == AUTO_BOOLEAN_TRUE)
&& gdbarch_displaced_step_copy_insn_p (gdbarch)
&& !RECORD_IS_USED);
}
ULONGEST len;
struct displaced_step_closure *closure;
struct displaced_step_inferior_state *displaced;
+ int status;
/* We should never reach this function if the architecture does not
support displaced stepping. */
displaced->step_saved_copy = xmalloc (len);
ignore_cleanups = make_cleanup (free_current_contents,
&displaced->step_saved_copy);
- read_memory (copy, displaced->step_saved_copy, len);
+ status = target_read_memory (copy, displaced->step_saved_copy, len);
+ if (status != 0)
+ throw_error (MEMORY_ERROR,
+ _("Error accessing memory address %s (%s) for "
+ "displaced-stepping scratch space."),
+ paddress (gdbarch, copy), safe_strerror (status));
if (debug_displaced)
{
fprintf_unfiltered (gdb_stdlog, "displaced: saved %s: ",
}
static void
-displaced_step_fixup (ptid_t event_ptid, enum target_signal signal)
+displaced_step_fixup (ptid_t event_ptid, enum gdb_signal signal)
{
struct cleanup *old_cleanups;
struct displaced_step_inferior_state *displaced
displaced_step_restore (displaced, displaced->step_ptid);
/* Did the instruction complete successfully? */
- if (signal == TARGET_SIGNAL_TRAP)
+ if (signal == GDB_SIGNAL_TRAP)
{
/* Fix up the resulting state. */
gdbarch_displaced_step_fixup (displaced->step_gdbarch,
if (gdbarch_displaced_step_hw_singlestep (gdbarch,
displaced->step_closure))
- target_resume (ptid, 1, TARGET_SIGNAL_0);
+ target_resume (ptid, 1, GDB_SIGNAL_0);
else
- target_resume (ptid, 0, TARGET_SIGNAL_0);
+ target_resume (ptid, 0, GDB_SIGNAL_0);
/* Done, we're stepping a thread. */
break;
if (debug_displaced)
fprintf_unfiltered (gdb_stdlog,
- "breakpoint is gone %s: step(%d)\n",
+ "displaced: breakpoint is gone: %s, step(%d)\n",
target_pid_to_str (tp->ptid), step);
- target_resume (ptid, step, TARGET_SIGNAL_0);
- tp->suspend.stop_signal = TARGET_SIGNAL_0;
+ target_resume (ptid, step, GDB_SIGNAL_0);
+ tp->suspend.stop_signal = GDB_SIGNAL_0;
/* This request was discarded. See if there's any other
thread waiting for its turn. */
STEP nonzero if we should step (zero to continue instead).
SIG is the signal to give the inferior (zero for none). */
void
-resume (int step, enum target_signal sig)
+resume (int step, enum gdb_signal sig)
{
int should_resume = 1;
struct cleanup *old_cleanups = make_cleanup (resume_cleanups, 0);
if (use_displaced_stepping (gdbarch)
&& (tp->control.trap_expected
|| (step && gdbarch_software_single_step_p (gdbarch)))
- && sig == TARGET_SIGNAL_0
+ && sig == GDB_SIGNAL_0
&& !current_inferior ()->waiting_for_vfork_done)
{
struct displaced_step_inferior_state *displaced;
return;
}
+ /* Update pc to reflect the new address from which we will execute
+ instructions due to displaced stepping. */
+ pc = regcache_read_pc (get_thread_regcache (inferior_ptid));
+
displaced = get_displaced_stepping_state (ptid_get_pid (inferior_ptid));
step = gdbarch_displaced_step_hw_singlestep (gdbarch,
displaced->step_closure);
once we arrive back at the step-resume breakpoint, actually step
over the breakpoint we originally wanted to step over. */
if (singlestep_breakpoints_inserted_p
- && tp->control.trap_expected && sig != TARGET_SIGNAL_0)
+ && tp->control.trap_expected && sig != GDB_SIGNAL_0)
{
/* If we have nested signals or a pending signal is delivered
immediately after a handler returns, might might already have
/* Avoid confusing the next resume, if the next stop/resume
happens to apply to another thread. */
- tp->suspend.stop_signal = TARGET_SIGNAL_0;
+ tp->suspend.stop_signal = GDB_SIGNAL_0;
/* Advise target which signals may be handled silently. If we have
removed breakpoints because we are stepping over one (which can
&& !use_displaced_stepping (gdbarch))
target_pass_signals (0, NULL);
else
- target_pass_signals ((int) TARGET_SIGNAL_LAST, signal_pass);
+ target_pass_signals ((int) GDB_SIGNAL_LAST, signal_pass);
target_resume (resume_ptid, step, sig);
}
/* Make sure we were stopped at a breakpoint. */
if (wait_status.kind != TARGET_WAITKIND_STOPPED
- || (wait_status.value.sig != TARGET_SIGNAL_TRAP
- && wait_status.value.sig != TARGET_SIGNAL_ILL
- && wait_status.value.sig != TARGET_SIGNAL_SEGV
- && wait_status.value.sig != TARGET_SIGNAL_EMT))
+ || (wait_status.value.sig != GDB_SIGNAL_TRAP
+ && wait_status.value.sig != GDB_SIGNAL_ILL
+ && wait_status.value.sig != GDB_SIGNAL_SEGV
+ && wait_status.value.sig != GDB_SIGNAL_EMT))
{
return 0;
}
You should call clear_proceed_status before calling proceed. */
void
-proceed (CORE_ADDR addr, enum target_signal siggnal, int step)
+proceed (CORE_ADDR addr, enum gdb_signal siggnal, int step)
{
struct regcache *regcache;
struct gdbarch *gdbarch;
struct thread_info *tp;
CORE_ADDR pc;
struct address_space *aspace;
- int oneproc = 0;
+ /* GDB may force the inferior to step due to various reasons. */
+ int force_step = 0;
/* If we're stopped at a fork/vfork, follow the branch set by the
"set follow-fork-mode" command; otherwise, we'll just proceed
actually be executing the breakpoint insn anyway.
We'll be (un-)executing the previous instruction. */
- oneproc = 1;
+ force_step = 1;
else if (gdbarch_single_step_through_delay_p (gdbarch)
&& gdbarch_single_step_through_delay (gdbarch,
get_current_frame ()))
/* We stepped onto an instruction that needs to be stepped
again before re-inserting the breakpoint, do so. */
- oneproc = 1;
+ force_step = 1;
}
else
{
is required it returns TRUE and sets the current thread to
the old thread. */
if (prepare_to_proceed (step))
- oneproc = 1;
+ force_step = 1;
}
/* prepare_to_proceed may change the current thread. */
tp = inferior_thread ();
- if (oneproc)
+ if (force_step)
{
tp->control.trap_expected = 1;
/* If displaced stepping is enabled, we can step over the
if (last_thread)
{
tp->suspend.stop_signal = last_thread->suspend.stop_signal;
- last_thread->suspend.stop_signal = TARGET_SIGNAL_0;
+ last_thread->suspend.stop_signal = GDB_SIGNAL_0;
}
}
}
- if (siggnal != TARGET_SIGNAL_DEFAULT)
+ if (siggnal != GDB_SIGNAL_DEFAULT)
tp->suspend.stop_signal = siggnal;
/* If this signal should not be seen by program,
give it zero. Used for debugging signals. */
else if (!signal_program[tp->suspend.stop_signal])
- tp->suspend.stop_signal = TARGET_SIGNAL_0;
+ tp->suspend.stop_signal = GDB_SIGNAL_0;
annotate_starting ();
init_infwait_state ();
/* Resume inferior. */
- resume (oneproc || step || bpstat_should_step (), tp->suspend.stop_signal);
+ resume (force_step || step || bpstat_should_step (),
+ tp->suspend.stop_signal);
/* Wait for it to stop (if not standalone)
and in any case decode why it stopped, and act accordingly. */
ptid_t waiton_ptid;
/* Current inferior wait state. */
-enum infwait_states infwait_state;
+static enum infwait_states infwait_state;
/* Data to be passed around while handling an event. This data is
discarded between events. */
int stop_func_filled_in;
CORE_ADDR stop_func_start;
CORE_ADDR stop_func_end;
- char *stop_func_name;
- int new_thread_event;
+ const char *stop_func_name;
int wait_some_more;
};
static void handle_step_into_function_backward (struct gdbarch *gdbarch,
struct execution_control_state *ecs);
static void check_exception_resume (struct execution_control_state *,
- struct frame_info *, struct symbol *);
+ struct frame_info *);
static void stop_stepping (struct execution_control_state *ecs);
static void prepare_to_wait (struct execution_control_state *ecs);
old_chain = make_cleanup_restore_current_thread ();
- switch_to_thread (info->ptid);
-
/* Go through handle_inferior_event/normal_stop, so we always
have consistent output as if the stop event had been
reported. */
ecs->ptid = info->ptid;
ecs->event_thread = find_thread_ptid (info->ptid);
ecs->ws.kind = TARGET_WAITKIND_STOPPED;
- ecs->ws.value.sig = TARGET_SIGNAL_0;
+ ecs->ws.value.sig = GDB_SIGNAL_0;
handle_inferior_event (ecs);
old_chain_2 = make_cleanup (finish_thread_state_cleanup,
&minus_one_ptid);
- /* In non-stop mode, each thread is handled individually.
- Switch early, so the global state is set correctly for this
- thread. */
- if (non_stop
- && ecs->ws.kind != TARGET_WAITKIND_EXITED
- && ecs->ws.kind != TARGET_WAITKIND_SIGNALLED)
- context_switch (ecs->ptid);
-
/* Now figure out what to do with the result of the result. */
handle_inferior_event (ecs);
wait_for_inferior (void)
{
struct cleanup *old_cleanups;
- struct execution_control_state ecss;
- struct execution_control_state *ecs;
if (debug_infrun)
fprintf_unfiltered
old_cleanups =
make_cleanup (delete_step_thread_step_resume_breakpoint_cleanup, NULL);
- ecs = &ecss;
- memset (ecs, 0, sizeof (*ecs));
-
while (1)
{
+ struct execution_control_state ecss;
+ struct execution_control_state *ecs = &ecss;
struct cleanup *old_chain;
+ memset (ecs, 0, sizeof (*ecs));
+
overlay_cache_invalid = 1;
if (deprecated_target_wait_hook)
if (debug_infrun)
print_target_wait_results (waiton_ptid, ecs->ptid, &ecs->ws);
- if (non_stop
- && ecs->ws.kind != TARGET_WAITKIND_IGNORE
- && ecs->ws.kind != TARGET_WAITKIND_NO_RESUMED
- && ecs->ws.kind != TARGET_WAITKIND_EXITED
- && ecs->ws.kind != TARGET_WAITKIND_SIGNALLED)
- /* In non-stop mode, each thread is handled individually. Switch
- early, so the global state is set correctly for this
- thread. */
- context_switch (ecs->ptid);
-
/* If an error happens while handling the event, propagate GDB's
knowledge of the executing state to the frontend/user running
state. */
if (ecs->ws.kind != TARGET_WAITKIND_STOPPED)
return;
- if (ecs->ws.value.sig != TARGET_SIGNAL_TRAP)
+ if (ecs->ws.value.sig != GDB_SIGNAL_TRAP)
return;
/* In reverse execution, when a breakpoint is hit, the instruction
struct cleanup *old_cleanups = NULL;
if (RECORD_IS_USED)
- old_cleanups = record_gdb_operation_disable_set ();
+ old_cleanups = record_full_gdb_operation_disable_set ();
/* When using hardware single-step, a SIGTRAP is reported for both
a completed single-step and a software breakpoint. Need to
}
}
-void
+static void
init_infwait_state (void)
{
waiton_ptid = pid_to_ptid (-1);
infwait_state = infwait_normal_state;
}
-void
-error_is_running (void)
-{
- error (_("Cannot execute this command while "
- "the selected thread is running."));
-}
-
-void
-ensure_not_running (void)
-{
- if (is_running (inferior_ptid))
- error_is_running ();
-}
-
static int
stepped_in_from (struct frame_info *frame, struct frame_id step_frame_id)
{
handle_syscall_event (struct execution_control_state *ecs)
{
struct regcache *regcache;
- struct gdbarch *gdbarch;
int syscall_number;
if (!ptid_equal (ecs->ptid, inferior_ptid))
context_switch (ecs->ptid);
regcache = get_thread_regcache (ecs->ptid);
- gdbarch = get_regcache_arch (regcache);
syscall_number = ecs->ws.value.syscall_number;
stop_pc = regcache_read_pc (regcache);
if (catch_syscall_enabled () > 0
&& catching_syscall_number (syscall_number) > 0)
{
+ enum bpstat_signal_value sval;
+
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: syscall number = '%d'\n",
syscall_number);
ecs->event_thread->control.stop_bpstat
= bpstat_stop_status (get_regcache_aspace (regcache),
stop_pc, ecs->ptid, &ecs->ws);
- ecs->random_signal
- = !bpstat_explains_signal (ecs->event_thread->control.stop_bpstat);
+
+ sval = bpstat_explains_signal (ecs->event_thread->control.stop_bpstat);
+ ecs->random_signal = sval == BPSTAT_SIGNAL_NO;
if (!ecs->random_signal)
{
/* Catchpoint hit. */
- ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_TRAP;
+ ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_TRAP;
return 0;
}
}
/* If no catchpoint triggered for this, then keep going. */
- ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0;
+ ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
keep_going (ecs);
return 1;
}
return;
}
- /* If it's a new process, add it to the thread database. */
-
- ecs->new_thread_event = (!ptid_equal (ecs->ptid, inferior_ptid)
- && !ptid_equal (ecs->ptid, minus_one_ptid)
- && !in_thread_list (ecs->ptid));
-
if (ecs->ws.kind != TARGET_WAITKIND_EXITED
- && ecs->ws.kind != TARGET_WAITKIND_SIGNALLED && ecs->new_thread_event)
- add_thread (ecs->ptid);
-
- ecs->event_thread = find_thread_ptid (ecs->ptid);
+ && ecs->ws.kind != TARGET_WAITKIND_SIGNALLED)
+ {
+ ecs->event_thread = find_thread_ptid (ecs->ptid);
+ /* If it's a new thread, add it to the thread database. */
+ if (ecs->event_thread == NULL)
+ ecs->event_thread = add_thread (ecs->ptid);
+ }
/* Dependent on valid ECS->EVENT_THREAD. */
adjust_pc_after_break (ecs);
for architectures like SPARC that place call dummies on the
stack. */
if (ecs->ws.kind == TARGET_WAITKIND_STOPPED
- && (ecs->ws.value.sig == TARGET_SIGNAL_ILL
- || ecs->ws.value.sig == TARGET_SIGNAL_SEGV
- || ecs->ws.value.sig == TARGET_SIGNAL_EMT))
+ && (ecs->ws.value.sig == GDB_SIGNAL_ILL
+ || ecs->ws.value.sig == GDB_SIGNAL_SEGV
+ || ecs->ws.value.sig == GDB_SIGNAL_EMT))
{
struct regcache *regcache = get_thread_regcache (ecs->ptid);
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: Treating signal as SIGTRAP\n");
- ecs->ws.value.sig = TARGET_SIGNAL_TRAP;
+ ecs->ws.value.sig = GDB_SIGNAL_TRAP;
}
}
if (stop_soon == NO_STOP_QUIETLY)
{
struct regcache *regcache;
+ enum bpstat_signal_value sval;
if (!ptid_equal (ecs->ptid, inferior_ptid))
context_switch (ecs->ptid);
ecs->event_thread->control.stop_bpstat
= bpstat_stop_status (get_regcache_aspace (regcache),
stop_pc, ecs->ptid, &ecs->ws);
- ecs->random_signal
- = !bpstat_explains_signal (ecs->event_thread->control.stop_bpstat);
+
+ sval
+ = bpstat_explains_signal (ecs->event_thread->control.stop_bpstat);
+ ecs->random_signal = sval == BPSTAT_SIGNAL_NO;
if (!ecs->random_signal)
{
/* A catchpoint triggered. */
- ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_TRAP;
+ ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_TRAP;
goto process_event_stop_test;
}
gdb of events. This allows the user to get control
and place breakpoints in initializer routines for
dynamically loaded objects (among other things). */
- ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0;
+ ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
if (stop_on_solib_events)
{
/* Make sure we print "Stopped due to solib-event" in
we're attaching or setting up a remote connection. */
if (stop_soon == STOP_QUIETLY || stop_soon == NO_STOP_QUIETLY)
{
+ if (!ptid_equal (ecs->ptid, inferior_ptid))
+ context_switch (ecs->ptid);
+
/* Loading of shared libraries might have changed breakpoint
addresses. Make sure new breakpoints are inserted. */
if (stop_soon == NO_STOP_QUIETLY
&& !breakpoints_always_inserted_mode ())
insert_breakpoints ();
- resume (0, TARGET_SIGNAL_0);
+ resume (0, GDB_SIGNAL_0);
prepare_to_wait (ecs);
return;
}
case TARGET_WAITKIND_SPURIOUS:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SPURIOUS\n");
- resume (0, TARGET_SIGNAL_0);
+ if (!ptid_equal (ecs->ptid, inferior_ptid))
+ context_switch (ecs->ptid);
+ resume (0, GDB_SIGNAL_0);
prepare_to_wait (ecs);
return;
case TARGET_WAITKIND_EXITED:
+ case TARGET_WAITKIND_SIGNALLED:
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_EXITED\n");
+ {
+ if (ecs->ws.kind == TARGET_WAITKIND_EXITED)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: TARGET_WAITKIND_EXITED\n");
+ else
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: TARGET_WAITKIND_SIGNALLED\n");
+ }
+
inferior_ptid = ecs->ptid;
set_current_inferior (find_inferior_pid (ptid_get_pid (ecs->ptid)));
set_current_program_space (current_inferior ()->pspace);
handle_vfork_child_exec_or_exit (0);
target_terminal_ours (); /* Must do this before mourn anyway. */
- print_exited_reason (ecs->ws.value.integer);
- /* Record the exit code in the convenience variable $_exitcode, so
- that the user can inspect this again later. */
- set_internalvar_integer (lookup_internalvar ("_exitcode"),
- (LONGEST) ecs->ws.value.integer);
+ if (ecs->ws.kind == TARGET_WAITKIND_EXITED)
+ {
+ /* Record the exit code in the convenience variable $_exitcode, so
+ that the user can inspect this again later. */
+ set_internalvar_integer (lookup_internalvar ("_exitcode"),
+ (LONGEST) ecs->ws.value.integer);
- /* Also record this in the inferior itself. */
- current_inferior ()->has_exit_code = 1;
- current_inferior ()->exit_code = (LONGEST) ecs->ws.value.integer;
+ /* Also record this in the inferior itself. */
+ current_inferior ()->has_exit_code = 1;
+ current_inferior ()->exit_code = (LONGEST) ecs->ws.value.integer;
+
+ print_exited_reason (ecs->ws.value.integer);
+ }
+ else
+ print_signal_exited_reason (ecs->ws.value.sig);
gdb_flush (gdb_stdout);
target_mourn_inferior ();
stop_stepping (ecs);
return;
- case TARGET_WAITKIND_SIGNALLED:
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SIGNALLED\n");
- inferior_ptid = ecs->ptid;
- set_current_inferior (find_inferior_pid (ptid_get_pid (ecs->ptid)));
- set_current_program_space (current_inferior ()->pspace);
- handle_vfork_child_exec_or_exit (0);
- stop_print_frame = 0;
- target_terminal_ours (); /* Must do this before mourn anyway. */
-
- /* Note: By definition of TARGET_WAITKIND_SIGNALLED, we shouldn't
- reach here unless the inferior is dead. However, for years
- target_kill() was called here, which hints that fatal signals aren't
- really fatal on some systems. If that's true, then some changes
- may be needed. */
- target_mourn_inferior ();
-
- print_signal_exited_reason (ecs->ws.value.sig);
- singlestep_breakpoints_inserted_p = 0;
- cancel_single_step_breakpoints ();
- stop_stepping (ecs);
- return;
-
/* The following are the only cases in which we keep going;
the above cases end in a continue or goto. */
case TARGET_WAITKIND_FORKED:
case TARGET_WAITKIND_VFORKED:
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_FORKED\n");
+ {
+ if (ecs->ws.kind == TARGET_WAITKIND_FORKED)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_FORKED\n");
+ else
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_VFORKED\n");
+ }
/* Check whether the inferior is displaced stepping. */
{
has been done. Perform cleanup for parent process here. Note
that this operation also cleans up the child process for vfork,
because their pages are shared. */
- displaced_step_fixup (ecs->ptid, TARGET_SIGNAL_TRAP);
+ displaced_step_fixup (ecs->ptid, GDB_SIGNAL_TRAP);
if (ecs->ws.kind == TARGET_WAITKIND_FORKED)
{
}
if (!ptid_equal (ecs->ptid, inferior_ptid))
- {
- context_switch (ecs->ptid);
- reinit_frame_cache ();
- }
+ context_switch (ecs->ptid);
/* Immediately detach breakpoints from the child before there's
any chance of letting the user delete breakpoints from the
vfork follow are detached. */
if (ecs->ws.kind != TARGET_WAITKIND_VFORKED)
{
- int child_pid = ptid_get_pid (ecs->ws.value.related_pid);
-
/* This won't actually modify the breakpoint list, but will
physically remove the breakpoints from the child. */
- detach_breakpoints (child_pid);
+ detach_breakpoints (ecs->ws.value.related_pid);
}
if (singlestep_breakpoints_inserted_p)
int follow_child
= (follow_fork_mode_string == follow_fork_mode_child);
- ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0;
+ ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
should_resume = follow_fork ();
stop_stepping (ecs);
return;
}
- ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_TRAP;
+ ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_TRAP;
goto process_event_stop_test;
case TARGET_WAITKIND_VFORK_DONE:
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_EXECD\n");
if (!ptid_equal (ecs->ptid, inferior_ptid))
- {
- context_switch (ecs->ptid);
- reinit_frame_cache ();
- }
+ context_switch (ecs->ptid);
singlestep_breakpoints_inserted_p = 0;
cancel_single_step_breakpoints ();
= bpstat_stop_status (get_regcache_aspace (get_current_regcache ()),
stop_pc, ecs->ptid, &ecs->ws);
ecs->random_signal
- = !bpstat_explains_signal (ecs->event_thread->control.stop_bpstat);
+ = (bpstat_explains_signal (ecs->event_thread->control.stop_bpstat)
+ == BPSTAT_SIGNAL_NO);
/* Note that this may be referenced from inside
bpstat_stop_status above, through inferior_has_execd. */
/* If no catchpoint triggered for this, then keep going. */
if (ecs->random_signal)
{
- ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0;
+ ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
keep_going (ecs);
return;
}
- ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_TRAP;
+ ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_TRAP;
goto process_event_stop_test;
/* Be careful not to try to gather much state about a thread
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_NO_HISTORY\n");
/* Reverse execution: target ran out of history info. */
+
+ /* Pull the single step breakpoints out of the target. */
+ if (singlestep_breakpoints_inserted_p)
+ {
+ if (!ptid_equal (ecs->ptid, inferior_ptid))
+ context_switch (ecs->ptid);
+ remove_single_step_breakpoints ();
+ singlestep_breakpoints_inserted_p = 0;
+ }
stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid));
print_no_history_reason ();
stop_stepping (ecs);
return;
}
- if (ecs->new_thread_event)
- {
- if (non_stop)
- /* Non-stop assumes that the target handles adding new threads
- to the thread list. */
- internal_error (__FILE__, __LINE__,
- "targets should add new threads to the thread "
- "list themselves in non-stop mode.");
-
- /* We may want to consider not doing a resume here in order to
- give the user a chance to play with the new thread. It might
- be good to make that a user-settable option. */
-
- /* At this point, all threads are stopped (happens automatically
- in either the OS or the native code). Therefore we need to
- continue all threads in order to make progress. */
-
- if (!ptid_equal (ecs->ptid, inferior_ptid))
- context_switch (ecs->ptid);
- target_resume (RESUME_ALL, 0, TARGET_SIGNAL_0);
- prepare_to_wait (ecs);
- return;
- }
-
if (ecs->ws.kind == TARGET_WAITKIND_STOPPED)
{
/* Do we need to clean up the state of a thread that has
SIG0 (generic unsignaled stop). */
if (ecs->event_thread->stop_requested
- && ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP)
- ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0;
+ && ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP)
+ ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
}
stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid));
/* We've either finished single-stepping past the single-step
breakpoint, or stopped for some other reason. It would be nice if
we could tell, but we can't reliably. */
- if (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP)
+ if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: stepping_past_"
"singlestep_breakpoint\n");
/* Pull the single step breakpoints out of the target. */
+ if (!ptid_equal (ecs->ptid, inferior_ptid))
+ context_switch (ecs->ptid);
remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
context_switch (saved_singlestep_ptid);
if (deprecated_context_hook)
- deprecated_context_hook (pid_to_thread_id (ecs->ptid));
+ deprecated_context_hook (pid_to_thread_id (saved_singlestep_ptid));
- resume (1, TARGET_SIGNAL_0);
+ resume (1, GDB_SIGNAL_0);
prepare_to_wait (ecs);
return;
}
/* If we stopped for some other reason than single-stepping, ignore
the fact that we were supposed to switch back. */
- if (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP)
+ if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
/* Pull the single step breakpoints out of the target. */
if (singlestep_breakpoints_inserted_p)
{
+ if (!ptid_equal (ecs->ptid, inferior_ptid))
+ context_switch (ecs->ptid);
remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
}
ecs->event_thread->control.trap_expected = 0;
- /* Note: We do not call context_switch at this point, as the
- context is already set up for stepping the original thread. */
- switch_to_thread (deferred_step_ptid);
+ context_switch (deferred_step_ptid);
deferred_step_ptid = null_ptid;
/* Suppress spurious "Switching to ..." message. */
previous_inferior_ptid = inferior_ptid;
- resume (1, TARGET_SIGNAL_0);
+ resume (1, GDB_SIGNAL_0);
prepare_to_wait (ecs);
return;
}
another thread. If so, then step that thread past the breakpoint,
and continue it. */
- if (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP)
+ if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP)
{
int thread_hop_needed = 0;
struct address_space *aspace =
if (new_singlestep_pc != singlestep_pc)
{
- enum target_signal stop_signal;
+ enum gdb_signal stop_signal;
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: unexpected thread,"
the context we want to use. Just fudge our
state and continue. */
stop_signal = ecs->event_thread->suspend.stop_signal;
- ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0;
+ ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
ecs->ptid = singlestep_ptid;
ecs->event_thread = find_thread_ptid (ecs->ptid);
ecs->event_thread->suspend.stop_signal = stop_signal;
}
/* Single step */
hw_step = maybe_software_singlestep (gdbarch, stop_pc);
- target_resume (ecs->ptid, hw_step, TARGET_SIGNAL_0);
+ target_resume (ecs->ptid, hw_step, GDB_SIGNAL_0);
waiton_ptid = ecs->ptid;
if (target_have_steppable_watchpoint)
infwait_state = infwait_step_watch_state;
skip_inline_frames call would break things. Fortunately
that's an extremely unlikely scenario. */
if (!pc_at_non_inline_function (aspace, stop_pc, &ecs->ws)
- && !(ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP
- && ecs->event_thread->control.trap_expected
- && pc_at_non_inline_function (aspace,
- ecs->event_thread->prev_pc,
+ && !(ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP
+ && ecs->event_thread->control.trap_expected
+ && pc_at_non_inline_function (aspace,
+ ecs->event_thread->prev_pc,
&ecs->ws)))
- skip_inline_frames (ecs->ptid);
+ {
+ skip_inline_frames (ecs->ptid);
+
+ /* Re-fetch current thread's frame in case that invalidated
+ the frame cache. */
+ frame = get_current_frame ();
+ gdbarch = get_frame_arch (frame);
+ }
}
- if (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP
+ if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP
&& ecs->event_thread->control.trap_expected
&& gdbarch_single_step_through_delay_p (gdbarch)
&& currently_stepping (ecs->event_thread))
3) set ecs->random_signal to 1, and the decision between 1 and 2
will be made according to the signal handling tables. */
- if (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP
- || stop_soon == STOP_QUIETLY || stop_soon == STOP_QUIETLY_NO_SIGSTOP
- || stop_soon == STOP_QUIETLY_REMOTE)
+ if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP
+ && stop_after_trap)
{
- if (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP
- && stop_after_trap)
- {
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: stopped\n");
- stop_print_frame = 0;
- stop_stepping (ecs);
- return;
- }
-
- /* This is originated from start_remote(), start_inferior() and
- shared libraries hook functions. */
- if (stop_soon == STOP_QUIETLY || stop_soon == STOP_QUIETLY_REMOTE)
- {
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: quietly stopped\n");
- stop_stepping (ecs);
- return;
- }
-
- /* This originates from attach_command(). We need to overwrite
- the stop_signal here, because some kernels don't ignore a
- SIGSTOP in a subsequent ptrace(PTRACE_CONT,SIGSTOP) call.
- See more comments in inferior.h. On the other hand, if we
- get a non-SIGSTOP, report it to the user - assume the backend
- will handle the SIGSTOP if it should show up later.
-
- Also consider that the attach is complete when we see a
- SIGTRAP. Some systems (e.g. Windows), and stubs supporting
- target extended-remote report it instead of a SIGSTOP
- (e.g. gdbserver). We already rely on SIGTRAP being our
- signal, so this is no exception.
-
- Also consider that the attach is complete when we see a
- TARGET_SIGNAL_0. In non-stop mode, GDB will explicitly tell
- the target to stop all threads of the inferior, in case the
- low level attach operation doesn't stop them implicitly. If
- they weren't stopped implicitly, then the stub will report a
- TARGET_SIGNAL_0, meaning: stopped for no particular reason
- other than GDB's request. */
- if (stop_soon == STOP_QUIETLY_NO_SIGSTOP
- && (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_STOP
- || ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP
- || ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_0))
- {
- stop_stepping (ecs);
- ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0;
- return;
- }
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stopped\n");
+ stop_print_frame = 0;
+ stop_stepping (ecs);
+ return;
+ }
- /* See if there is a breakpoint/watchpoint/catchpoint/etc. that
- handles this event. */
- ecs->event_thread->control.stop_bpstat
- = bpstat_stop_status (get_regcache_aspace (get_current_regcache ()),
- stop_pc, ecs->ptid, &ecs->ws);
+ /* This is originated from start_remote(), start_inferior() and
+ shared libraries hook functions. */
+ if (stop_soon == STOP_QUIETLY || stop_soon == STOP_QUIETLY_REMOTE)
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: quietly stopped\n");
+ stop_stepping (ecs);
+ return;
+ }
- /* Following in case break condition called a
- function. */
- stop_print_frame = 1;
-
- /* This is where we handle "moribund" watchpoints. Unlike
- software breakpoints traps, hardware watchpoint traps are
- always distinguishable from random traps. If no high-level
- watchpoint is associated with the reported stop data address
- anymore, then the bpstat does not explain the signal ---
- simply make sure to ignore it if `stopped_by_watchpoint' is
- set. */
-
- if (debug_infrun
- && ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP
- && !bpstat_explains_signal (ecs->event_thread->control.stop_bpstat)
- && stopped_by_watchpoint)
- fprintf_unfiltered (gdb_stdlog,
- "infrun: no user watchpoint explains "
- "watchpoint SIGTRAP, ignoring\n");
-
- /* NOTE: cagney/2003-03-29: These two checks for a random signal
- at one stage in the past included checks for an inferior
- function call's call dummy's return breakpoint. The original
- comment, that went with the test, read:
-
- ``End of a stack dummy. Some systems (e.g. Sony news) give
- another signal besides SIGTRAP, so check here as well as
- above.''
-
- If someone ever tries to get call dummys on a
- non-executable stack to work (where the target would stop
- with something like a SIGSEGV), then those tests might need
- to be re-instated. Given, however, that the tests were only
- enabled when momentary breakpoints were not being used, I
- suspect that it won't be the case.
-
- NOTE: kettenis/2004-02-05: Indeed such checks don't seem to
- be necessary for call dummies on a non-executable stack on
- SPARC. */
-
- if (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP)
- ecs->random_signal
- = !(bpstat_explains_signal (ecs->event_thread->control.stop_bpstat)
- || stopped_by_watchpoint
- || ecs->event_thread->control.trap_expected
- || (ecs->event_thread->control.step_range_end
- && (ecs->event_thread->control.step_resume_breakpoint
- == NULL)));
- else
- {
- ecs->random_signal = !bpstat_explains_signal
- (ecs->event_thread->control.stop_bpstat);
- if (!ecs->random_signal)
- ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_TRAP;
- }
+ /* This originates from attach_command(). We need to overwrite
+ the stop_signal here, because some kernels don't ignore a
+ SIGSTOP in a subsequent ptrace(PTRACE_CONT,SIGSTOP) call.
+ See more comments in inferior.h. On the other hand, if we
+ get a non-SIGSTOP, report it to the user - assume the backend
+ will handle the SIGSTOP if it should show up later.
+
+ Also consider that the attach is complete when we see a
+ SIGTRAP. Some systems (e.g. Windows), and stubs supporting
+ target extended-remote report it instead of a SIGSTOP
+ (e.g. gdbserver). We already rely on SIGTRAP being our
+ signal, so this is no exception.
+
+ Also consider that the attach is complete when we see a
+ GDB_SIGNAL_0. In non-stop mode, GDB will explicitly tell
+ the target to stop all threads of the inferior, in case the
+ low level attach operation doesn't stop them implicitly. If
+ they weren't stopped implicitly, then the stub will report a
+ GDB_SIGNAL_0, meaning: stopped for no particular reason
+ other than GDB's request. */
+ if (stop_soon == STOP_QUIETLY_NO_SIGSTOP
+ && (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_STOP
+ || ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP
+ || ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_0))
+ {
+ stop_stepping (ecs);
+ ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
+ return;
}
- /* When we reach this point, we've pretty much decided
- that the reason for stopping must've been a random
- (unexpected) signal. */
+ /* See if there is a breakpoint/watchpoint/catchpoint/etc. that
+ handles this event. */
+ ecs->event_thread->control.stop_bpstat
+ = bpstat_stop_status (get_regcache_aspace (get_current_regcache ()),
+ stop_pc, ecs->ptid, &ecs->ws);
+
+ /* Following in case break condition called a
+ function. */
+ stop_print_frame = 1;
+ /* This is where we handle "moribund" watchpoints. Unlike
+ software breakpoints traps, hardware watchpoint traps are
+ always distinguishable from random traps. If no high-level
+ watchpoint is associated with the reported stop data address
+ anymore, then the bpstat does not explain the signal ---
+ simply make sure to ignore it if `stopped_by_watchpoint' is
+ set. */
+
+ if (debug_infrun
+ && ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP
+ && (bpstat_explains_signal (ecs->event_thread->control.stop_bpstat)
+ == BPSTAT_SIGNAL_NO)
+ && stopped_by_watchpoint)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: no user watchpoint explains "
+ "watchpoint SIGTRAP, ignoring\n");
+
+ /* NOTE: cagney/2003-03-29: These two checks for a random signal
+ at one stage in the past included checks for an inferior
+ function call's call dummy's return breakpoint. The original
+ comment, that went with the test, read:
+
+ ``End of a stack dummy. Some systems (e.g. Sony news) give
+ another signal besides SIGTRAP, so check here as well as
+ above.''
+
+ If someone ever tries to get call dummys on a
+ non-executable stack to work (where the target would stop
+ with something like a SIGSEGV), then those tests might need
+ to be re-instated. Given, however, that the tests were only
+ enabled when momentary breakpoints were not being used, I
+ suspect that it won't be the case.
+
+ NOTE: kettenis/2004-02-05: Indeed such checks don't seem to
+ be necessary for call dummies on a non-executable stack on
+ SPARC. */
+
+ if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP)
+ ecs->random_signal
+ = !((bpstat_explains_signal (ecs->event_thread->control.stop_bpstat)
+ != BPSTAT_SIGNAL_NO)
+ || stopped_by_watchpoint
+ || ecs->event_thread->control.trap_expected
+ || (ecs->event_thread->control.step_range_end
+ && (ecs->event_thread->control.step_resume_breakpoint
+ == NULL)));
else
- ecs->random_signal = 1;
+ {
+ enum bpstat_signal_value sval;
+
+ sval = bpstat_explains_signal (ecs->event_thread->control.stop_bpstat);
+ ecs->random_signal = (sval == BPSTAT_SIGNAL_NO);
+
+ if (sval == BPSTAT_SIGNAL_HIDE)
+ ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_TRAP;
+ }
process_event_stop_test:
/* Clear the signal if it should not be passed. */
if (signal_program[ecs->event_thread->suspend.stop_signal] == 0)
- ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0;
+ ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
if (ecs->event_thread->prev_pc == stop_pc
&& ecs->event_thread->control.trap_expected
}
if (ecs->event_thread->control.step_range_end != 0
- && ecs->event_thread->suspend.stop_signal != TARGET_SIGNAL_0
- && (ecs->event_thread->control.step_range_start <= stop_pc
- && stop_pc < ecs->event_thread->control.step_range_end)
+ && ecs->event_thread->suspend.stop_signal != GDB_SIGNAL_0
+ && pc_in_thread_step_range (stop_pc, ecs->event_thread)
&& frame_id_eq (get_stack_frame_id (frame),
ecs->event_thread->control.step_stack_frame_id)
&& ecs->event_thread->control.step_resume_breakpoint == NULL)
(leaving the inferior at the step-resume-breakpoint without
actually executing it). Either way continue until the
breakpoint is really hit. */
- keep_going (ecs);
- return;
}
+ else
+ {
+ /* Handle cases caused by hitting a breakpoint. */
- /* Handle cases caused by hitting a breakpoint. */
- {
- CORE_ADDR jmp_buf_pc;
- struct bpstat_what what;
+ CORE_ADDR jmp_buf_pc;
+ struct bpstat_what what;
- what = bpstat_what (ecs->event_thread->control.stop_bpstat);
+ what = bpstat_what (ecs->event_thread->control.stop_bpstat);
- if (what.call_dummy)
- {
- stop_stack_dummy = what.call_dummy;
- }
+ if (what.call_dummy)
+ {
+ stop_stack_dummy = what.call_dummy;
+ }
- /* If we hit an internal event that triggers symbol changes, the
- current frame will be invalidated within bpstat_what (e.g., if
- we hit an internal solib event). Re-fetch it. */
- frame = get_current_frame ();
- gdbarch = get_frame_arch (frame);
+ /* If we hit an internal event that triggers symbol changes, the
+ current frame will be invalidated within bpstat_what (e.g.,
+ if we hit an internal solib event). Re-fetch it. */
+ frame = get_current_frame ();
+ gdbarch = get_frame_arch (frame);
- switch (what.main_action)
- {
- case BPSTAT_WHAT_SET_LONGJMP_RESUME:
- /* If we hit the breakpoint at longjmp while stepping, we
- install a momentary breakpoint at the target of the
- jmp_buf. */
+ switch (what.main_action)
+ {
+ case BPSTAT_WHAT_SET_LONGJMP_RESUME:
+ /* If we hit the breakpoint at longjmp while stepping, we
+ install a momentary breakpoint at the target of the
+ jmp_buf. */
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog,
- "infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME\n");
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME\n");
- ecs->event_thread->stepping_over_breakpoint = 1;
+ ecs->event_thread->stepping_over_breakpoint = 1;
- if (what.is_longjmp)
- {
- if (!gdbarch_get_longjmp_target_p (gdbarch)
- || !gdbarch_get_longjmp_target (gdbarch,
- frame, &jmp_buf_pc))
- {
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog,
- "infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME "
- "(!gdbarch_get_longjmp_target)\n");
- keep_going (ecs);
- return;
- }
+ if (what.is_longjmp)
+ {
+ struct value *arg_value;
+
+ /* If we set the longjmp breakpoint via a SystemTap
+ probe, then use it to extract the arguments. The
+ destination PC is the third argument to the
+ probe. */
+ arg_value = probe_safe_evaluate_at_pc (frame, 2);
+ if (arg_value)
+ jmp_buf_pc = value_as_address (arg_value);
+ else if (!gdbarch_get_longjmp_target_p (gdbarch)
+ || !gdbarch_get_longjmp_target (gdbarch,
+ frame, &jmp_buf_pc))
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME "
+ "(!gdbarch_get_longjmp_target)\n");
+ keep_going (ecs);
+ return;
+ }
- /* We're going to replace the current step-resume breakpoint
- with a longjmp-resume breakpoint. */
- delete_step_resume_breakpoint (ecs->event_thread);
+ /* Insert a breakpoint at resume address. */
+ insert_longjmp_resume_breakpoint (gdbarch, jmp_buf_pc);
+ }
+ else
+ check_exception_resume (ecs, frame);
+ keep_going (ecs);
+ return;
- /* Insert a breakpoint at resume address. */
- insert_longjmp_resume_breakpoint (gdbarch, jmp_buf_pc);
- }
- else
+ case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME:
{
- struct symbol *func = get_frame_function (frame);
-
- if (func)
- check_exception_resume (ecs, frame, func);
- }
- keep_going (ecs);
- return;
-
- case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME:
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog,
- "infrun: BPSTAT_WHAT_CLEAR_LONGJMP_RESUME\n");
+ struct frame_info *init_frame;
- if (what.is_longjmp)
- {
- gdb_assert (ecs->event_thread->control.step_resume_breakpoint
- != NULL);
- delete_step_resume_breakpoint (ecs->event_thread);
- }
- else
- {
/* There are several cases to consider.
1. The initiating frame no longer exists. In this case
- we must stop, because the exception has gone too far.
+ we must stop, because the exception or longjmp has gone
+ too far.
2. The initiating frame exists, and is the same as the
- current frame. We stop, because the exception has been
- caught.
+ current frame. We stop, because the exception or
+ longjmp has been caught.
3. The initiating frame exists and is different from
- the current frame. This means the exception has been
- caught beneath the initiating frame, so keep going. */
- struct frame_info *init_frame
- = frame_find_by_id (ecs->event_thread->initiating_frame);
+ the current frame. This means the exception or longjmp
+ has been caught beneath the initiating frame, so keep
+ going.
+
+ 4. longjmp breakpoint has been placed just to protect
+ against stale dummy frames and user is not interested
+ in stopping around longjmps. */
+
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: BPSTAT_WHAT_CLEAR_LONGJMP_RESUME\n");
gdb_assert (ecs->event_thread->control.exception_resume_breakpoint
!= NULL);
delete_exception_resume_breakpoint (ecs->event_thread);
+ if (what.is_longjmp)
+ {
+ check_longjmp_breakpoint_for_call_dummy (ecs->event_thread->num);
+
+ if (!frame_id_p (ecs->event_thread->initiating_frame))
+ {
+ /* Case 4. */
+ keep_going (ecs);
+ return;
+ }
+ }
+
+ init_frame = frame_find_by_id (ecs->event_thread->initiating_frame);
+
if (init_frame)
{
struct frame_id current_id
/* For Cases 1 and 2, remove the step-resume breakpoint,
if it exists. */
delete_step_resume_breakpoint (ecs->event_thread);
+
+ ecs->event_thread->control.stop_step = 1;
+ print_end_stepping_range_reason ();
+ stop_stepping (ecs);
}
+ return;
- ecs->event_thread->control.stop_step = 1;
- print_end_stepping_range_reason ();
- stop_stepping (ecs);
- return;
-
- case BPSTAT_WHAT_SINGLE:
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_SINGLE\n");
- ecs->event_thread->stepping_over_breakpoint = 1;
- /* Still need to check other stuff, at least the case
- where we are stepping and step out of the right range. */
- break;
+ case BPSTAT_WHAT_SINGLE:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_SINGLE\n");
+ ecs->event_thread->stepping_over_breakpoint = 1;
+ /* Still need to check other stuff, at least the case where
+ we are stepping and step out of the right range. */
+ break;
- case BPSTAT_WHAT_STEP_RESUME:
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STEP_RESUME\n");
+ case BPSTAT_WHAT_STEP_RESUME:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STEP_RESUME\n");
- delete_step_resume_breakpoint (ecs->event_thread);
- if (ecs->event_thread->control.proceed_to_finish
- && execution_direction == EXEC_REVERSE)
- {
- struct thread_info *tp = ecs->event_thread;
-
- /* We are finishing a function in reverse, and just hit
- the step-resume breakpoint at the start address of the
- function, and we're almost there -- just need to back
- up by one more single-step, which should take us back
- to the function call. */
- tp->control.step_range_start = tp->control.step_range_end = 1;
- keep_going (ecs);
- return;
- }
- fill_in_stop_func (gdbarch, ecs);
- if (stop_pc == ecs->stop_func_start
- && execution_direction == EXEC_REVERSE)
- {
- /* We are stepping over a function call in reverse, and
- just hit the step-resume breakpoint at the start
- address of the function. Go back to single-stepping,
- which should take us back to the function call. */
- ecs->event_thread->stepping_over_breakpoint = 1;
- keep_going (ecs);
- return;
- }
- break;
+ delete_step_resume_breakpoint (ecs->event_thread);
+ if (ecs->event_thread->control.proceed_to_finish
+ && execution_direction == EXEC_REVERSE)
+ {
+ struct thread_info *tp = ecs->event_thread;
+
+ /* We are finishing a function in reverse, and just hit
+ the step-resume breakpoint at the start address of
+ the function, and we're almost there -- just need to
+ back up by one more single-step, which should take us
+ back to the function call. */
+ tp->control.step_range_start = tp->control.step_range_end = 1;
+ keep_going (ecs);
+ return;
+ }
+ fill_in_stop_func (gdbarch, ecs);
+ if (stop_pc == ecs->stop_func_start
+ && execution_direction == EXEC_REVERSE)
+ {
+ /* We are stepping over a function call in reverse, and
+ just hit the step-resume breakpoint at the start
+ address of the function. Go back to single-stepping,
+ which should take us back to the function call. */
+ ecs->event_thread->stepping_over_breakpoint = 1;
+ keep_going (ecs);
+ return;
+ }
+ break;
- case BPSTAT_WHAT_STOP_NOISY:
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_NOISY\n");
- stop_print_frame = 1;
+ case BPSTAT_WHAT_STOP_NOISY:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_NOISY\n");
+ stop_print_frame = 1;
- /* We are about to nuke the step_resume_breakpointt via the
- cleanup chain, so no need to worry about it here. */
+ /* We are about to nuke the step_resume_breakpointt via the
+ cleanup chain, so no need to worry about it here. */
- stop_stepping (ecs);
- return;
+ stop_stepping (ecs);
+ return;
- case BPSTAT_WHAT_STOP_SILENT:
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_SILENT\n");
- stop_print_frame = 0;
+ case BPSTAT_WHAT_STOP_SILENT:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_SILENT\n");
+ stop_print_frame = 0;
- /* We are about to nuke the step_resume_breakpoin via the
- cleanup chain, so no need to worry about it here. */
+ /* We are about to nuke the step_resume_breakpoin via the
+ cleanup chain, so no need to worry about it here. */
- stop_stepping (ecs);
- return;
+ stop_stepping (ecs);
+ return;
- case BPSTAT_WHAT_HP_STEP_RESUME:
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_HP_STEP_RESUME\n");
+ case BPSTAT_WHAT_HP_STEP_RESUME:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_HP_STEP_RESUME\n");
- delete_step_resume_breakpoint (ecs->event_thread);
- if (ecs->event_thread->step_after_step_resume_breakpoint)
- {
- /* Back when the step-resume breakpoint was inserted, we
- were trying to single-step off a breakpoint. Go back
- to doing that. */
- ecs->event_thread->step_after_step_resume_breakpoint = 0;
- ecs->event_thread->stepping_over_breakpoint = 1;
- keep_going (ecs);
- return;
- }
- break;
+ delete_step_resume_breakpoint (ecs->event_thread);
+ if (ecs->event_thread->step_after_step_resume_breakpoint)
+ {
+ /* Back when the step-resume breakpoint was inserted, we
+ were trying to single-step off a breakpoint. Go back
+ to doing that. */
+ ecs->event_thread->step_after_step_resume_breakpoint = 0;
+ ecs->event_thread->stepping_over_breakpoint = 1;
+ keep_going (ecs);
+ return;
+ }
+ break;
- case BPSTAT_WHAT_KEEP_CHECKING:
- break;
- }
- }
+ case BPSTAT_WHAT_KEEP_CHECKING:
+ break;
+ }
+ }
/* We come here if we hit a breakpoint but should not
stop for it. Possibly we also were stepping
breakpoint, and we simply need to step over that breakpoint
to get it going again, do that first. */
if ((ecs->event_thread->control.trap_expected
- && ecs->event_thread->suspend.stop_signal != TARGET_SIGNAL_TRAP)
+ && ecs->event_thread->suspend.stop_signal != GDB_SIGNAL_TRAP)
|| ecs->event_thread->stepping_over_breakpoint)
{
keep_going (ecs);
through a function epilogue and therefore must detect when
the current-frame changes in the middle of a line. */
- if (stop_pc >= ecs->event_thread->control.step_range_start
- && stop_pc < ecs->event_thread->control.step_range_end
+ if (pc_in_thread_step_range (stop_pc, ecs->event_thread)
&& (execution_direction != EXEC_REVERSE
|| frame_id_eq (get_frame_id (frame),
ecs->event_thread->control.step_frame_id)))
return;
}
+ /* If we're in the return path from a shared library trampoline,
+ we want to proceed through the trampoline when stepping. */
+ /* macro/2012-04-25: This needs to come before the subroutine
+ call check below as on some targets return trampolines look
+ like subroutine calls (MIPS16 return thunks). */
+ if (gdbarch_in_solib_return_trampoline (gdbarch,
+ stop_pc, ecs->stop_func_name)
+ && ecs->event_thread->control.step_over_calls != STEP_OVER_NONE)
+ {
+ /* Determine where this trampoline returns. */
+ CORE_ADDR real_stop_pc;
+
+ real_stop_pc = gdbarch_skip_trampoline_code (gdbarch, frame, stop_pc);
+
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: stepped into solib return tramp\n");
+
+ /* Only proceed through if we know where it's going. */
+ if (real_stop_pc)
+ {
+ /* And put the step-breakpoint there and go until there. */
+ struct symtab_and_line sr_sal;
+
+ init_sal (&sr_sal); /* initialize to zeroes */
+ sr_sal.pc = real_stop_pc;
+ sr_sal.section = find_pc_overlay (sr_sal.pc);
+ sr_sal.pspace = get_frame_program_space (frame);
+
+ /* Do not specify what the fp should be when we stop since
+ on some machines the prologue is where the new fp value
+ is established. */
+ insert_step_resume_breakpoint_at_sal (gdbarch,
+ sr_sal, null_frame_id);
+
+ /* Restart without fiddling with the step ranges or
+ other state. */
+ keep_going (ecs);
+ return;
+ }
+ }
+
/* Check for subroutine calls. The check for the current frame
equalling the step ID is not necessary - the check of the
previous frame's ID is sufficient - but it is a common case and
if (execution_direction == EXEC_REVERSE)
{
- struct symtab_and_line sr_sal;
-
- /* Normal function call return (static or dynamic). */
- init_sal (&sr_sal);
- sr_sal.pc = ecs->stop_func_start;
- sr_sal.pspace = get_frame_program_space (frame);
- insert_step_resume_breakpoint_at_sal (gdbarch,
- sr_sal, null_frame_id);
+ /* If we're already at the start of the function, we've either
+ just stepped backward into a single instruction function,
+ or stepped back out of a signal handler to the first instruction
+ of the function. Just keep going, which will single-step back
+ to the caller. */
+ if (ecs->stop_func_start != stop_pc)
+ {
+ struct symtab_and_line sr_sal;
+
+ /* Normal function call return (static or dynamic). */
+ init_sal (&sr_sal);
+ sr_sal.pc = ecs->stop_func_start;
+ sr_sal.pspace = get_frame_program_space (frame);
+ insert_step_resume_breakpoint_at_sal (gdbarch,
+ sr_sal, null_frame_id);
+ }
}
else
insert_step_resume_breakpoint_at_caller (frame);
tmp_sal = find_pc_line (ecs->stop_func_start, 0);
if (tmp_sal.line != 0
- && !function_pc_is_marked_for_skip (ecs->stop_func_start))
+ && !function_name_is_marked_for_skip (ecs->stop_func_name,
+ &tmp_sal))
{
if (execution_direction == EXEC_REVERSE)
handle_step_into_function_backward (gdbarch, ecs);
if (execution_direction == EXEC_REVERSE)
{
- /* Set a breakpoint at callee's start address.
- From there we can step once and be back in the caller. */
- struct symtab_and_line sr_sal;
+ /* If we're already at the start of the function, we've either just
+ stepped backward into a single instruction function without line
+ number info, or stepped back out of a signal handler to the first
+ instruction of the function without line number info. Just keep
+ going, which will single-step back to the caller. */
+ if (ecs->stop_func_start != stop_pc)
+ {
+ /* Set a breakpoint at callee's start address.
+ From there we can step once and be back in the caller. */
+ struct symtab_and_line sr_sal;
- init_sal (&sr_sal);
- sr_sal.pc = ecs->stop_func_start;
- sr_sal.pspace = get_frame_program_space (frame);
- insert_step_resume_breakpoint_at_sal (gdbarch,
- sr_sal, null_frame_id);
+ init_sal (&sr_sal);
+ sr_sal.pc = ecs->stop_func_start;
+ sr_sal.pspace = get_frame_program_space (frame);
+ insert_step_resume_breakpoint_at_sal (gdbarch,
+ sr_sal, null_frame_id);
+ }
}
else
/* Set a breakpoint at callee's return address (the address
}
}
- /* If we're in the return path from a shared library trampoline,
- we want to proceed through the trampoline when stepping. */
- if (gdbarch_in_solib_return_trampoline (gdbarch,
- stop_pc, ecs->stop_func_name))
- {
- /* Determine where this trampoline returns. */
- CORE_ADDR real_stop_pc;
-
- real_stop_pc = gdbarch_skip_trampoline_code (gdbarch, frame, stop_pc);
-
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog,
- "infrun: stepped into solib return tramp\n");
-
- /* Only proceed through if we know where it's going. */
- if (real_stop_pc)
- {
- /* And put the step-breakpoint there and go until there. */
- struct symtab_and_line sr_sal;
-
- init_sal (&sr_sal); /* initialize to zeroes */
- sr_sal.pc = real_stop_pc;
- sr_sal.section = find_pc_overlay (sr_sal.pc);
- sr_sal.pspace = get_frame_program_space (frame);
-
- /* Do not specify what the fp should be when we stop since
- on some machines the prologue is where the new fp value
- is established. */
- insert_step_resume_breakpoint_at_sal (gdbarch,
- sr_sal, null_frame_id);
-
- /* Restart without fiddling with the step ranges or
- other state. */
- keep_going (ecs);
- return;
- }
- }
-
stop_pc_sal = find_pc_line (stop_pc, 0);
/* NOTE: tausq/2004-05-24: This if block used to be done before all
static void
insert_longjmp_resume_breakpoint (struct gdbarch *gdbarch, CORE_ADDR pc)
{
- /* There should never be more than one step-resume or longjmp-resume
- breakpoint per thread, so we should never be setting a new
+ /* There should never be more than one longjmp-resume breakpoint per
+ thread, so we should never be setting a new
longjmp_resume_breakpoint when one is already active. */
- gdb_assert (inferior_thread ()->control.step_resume_breakpoint == NULL);
+ gdb_assert (inferior_thread ()->control.exception_resume_breakpoint == NULL);
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: inserting longjmp-resume breakpoint at %s\n",
paddress (gdbarch, pc));
- inferior_thread ()->control.step_resume_breakpoint =
+ inferior_thread ()->control.exception_resume_breakpoint =
set_momentary_breakpoint_at_pc (gdbarch, pc, bp_longjmp_resume);
}
bp = set_momentary_breakpoint_at_pc (get_frame_arch (frame),
handler, bp_exception_resume);
+
+ /* set_momentary_breakpoint_at_pc invalidates FRAME. */
+ frame = NULL;
+
bp->thread = tp->num;
inferior_thread ()->control.exception_resume_breakpoint = bp;
}
}
}
+/* A helper for check_exception_resume that sets an
+ exception-breakpoint based on a SystemTap probe. */
+
+static void
+insert_exception_resume_from_probe (struct thread_info *tp,
+ const struct probe *probe,
+ struct frame_info *frame)
+{
+ struct value *arg_value;
+ CORE_ADDR handler;
+ struct breakpoint *bp;
+
+ arg_value = probe_safe_evaluate_at_pc (frame, 1);
+ if (!arg_value)
+ return;
+
+ handler = value_as_address (arg_value);
+
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: exception resume at %s\n",
+ paddress (get_objfile_arch (probe->objfile),
+ handler));
+
+ bp = set_momentary_breakpoint_at_pc (get_frame_arch (frame),
+ handler, bp_exception_resume);
+ bp->thread = tp->num;
+ inferior_thread ()->control.exception_resume_breakpoint = bp;
+}
+
/* This is called when an exception has been intercepted. Check to
see whether the exception's destination is of interest, and if so,
set an exception resume breakpoint there. */
static void
check_exception_resume (struct execution_control_state *ecs,
- struct frame_info *frame, struct symbol *func)
+ struct frame_info *frame)
{
volatile struct gdb_exception e;
+ const struct probe *probe;
+ struct symbol *func;
+
+ /* First see if this exception unwinding breakpoint was set via a
+ SystemTap probe point. If so, the probe has two arguments: the
+ CFA and the HANDLER. We ignore the CFA, extract the handler, and
+ set a breakpoint there. */
+ probe = find_probe_by_pc (get_frame_pc (frame));
+ if (probe)
+ {
+ insert_exception_resume_from_probe (ecs->event_thread, probe, frame);
+ return;
+ }
+
+ func = get_frame_function (frame);
+ if (!func)
+ return;
TRY_CATCH (e, RETURN_MASK_ERROR)
{
struct block *b;
- struct dict_iterator iter;
+ struct block_iterator iter;
struct symbol *sym;
int argno = 0;
inferior and not return to debugger. */
if (ecs->event_thread->control.trap_expected
- && ecs->event_thread->suspend.stop_signal != TARGET_SIGNAL_TRAP)
+ && ecs->event_thread->suspend.stop_signal != GDB_SIGNAL_TRAP)
{
/* We took a signal (which we are supposed to pass through to
the inferior, else we'd not get here) and we haven't yet
simulator; the simulator then delivers the hardware
equivalent of a SIGNAL_TRAP to the program being debugged. */
- if (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP
+ if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP
&& !signal_program[ecs->event_thread->suspend.stop_signal])
- ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0;
+ ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
discard_cleanups (old_cleanups);
resume (currently_stepping (ecs->event_thread),
/* The inferior was terminated by a signal, print why it stopped. */
static void
-print_signal_exited_reason (enum target_signal siggnal)
+print_signal_exited_reason (enum gdb_signal siggnal)
{
struct ui_out *uiout = current_uiout;
ui_out_text (uiout, "\nProgram terminated with signal ");
annotate_signal_name ();
ui_out_field_string (uiout, "signal-name",
- target_signal_to_name (siggnal));
+ gdb_signal_to_name (siggnal));
annotate_signal_name_end ();
ui_out_text (uiout, ", ");
annotate_signal_string ();
ui_out_field_string (uiout, "signal-meaning",
- target_signal_to_string (siggnal));
+ gdb_signal_to_string (siggnal));
annotate_signal_string_end ();
ui_out_text (uiout, ".\n");
ui_out_text (uiout, "The program no longer exists.\n");
tells us to print about it. */
static void
-print_signal_received_reason (enum target_signal siggnal)
+print_signal_received_reason (enum gdb_signal siggnal)
{
struct ui_out *uiout = current_uiout;
annotate_signal ();
- if (siggnal == TARGET_SIGNAL_0 && !ui_out_is_mi_like_p (uiout))
+ if (siggnal == GDB_SIGNAL_0 && !ui_out_is_mi_like_p (uiout))
{
struct thread_info *t = inferior_thread ();
ui_out_field_string
(uiout, "reason", async_reason_lookup (EXEC_ASYNC_SIGNAL_RECEIVED));
ui_out_field_string (uiout, "signal-name",
- target_signal_to_name (siggnal));
+ gdb_signal_to_name (siggnal));
annotate_signal_name_end ();
ui_out_text (uiout, ", ");
annotate_signal_string ();
ui_out_field_string (uiout, "signal-meaning",
- target_signal_to_string (siggnal));
+ gdb_signal_to_string (siggnal));
annotate_signal_string_end ();
}
ui_out_text (uiout, ".\n");
{
if (signo == -1)
{
- for (signo = 0; signo < (int) TARGET_SIGNAL_LAST; signo++)
+ for (signo = 0; signo < (int) GDB_SIGNAL_LAST; signo++)
signal_cache_update (signo);
return;
signal_pass[signo] = (signal_stop[signo] == 0
&& signal_print[signo] == 0
- && signal_program[signo] == 1);
+ && signal_program[signo] == 1
+ && signal_catch[signo] == 0);
}
int
return ret;
}
+/* Update the global 'signal_catch' from INFO and notify the
+ target. */
+
+void
+signal_catch_update (const unsigned int *info)
+{
+ int i;
+
+ for (i = 0; i < GDB_SIGNAL_LAST; ++i)
+ signal_catch[i] = info[i] > 0;
+ signal_cache_update (-1);
+ target_pass_signals ((int) GDB_SIGNAL_LAST, signal_pass);
+}
+
static void
sig_print_header (void)
{
}
static void
-sig_print_info (enum target_signal oursig)
+sig_print_info (enum gdb_signal oursig)
{
- const char *name = target_signal_to_name (oursig);
+ const char *name = gdb_signal_to_name (oursig);
int name_padding = 13 - strlen (name);
if (name_padding <= 0)
printf_filtered ("%s\t", signal_stop[oursig] ? "Yes" : "No");
printf_filtered ("%s\t", signal_print[oursig] ? "Yes" : "No");
printf_filtered ("%s\t\t", signal_program[oursig] ? "Yes" : "No");
- printf_filtered ("%s\n", target_signal_to_string (oursig));
+ printf_filtered ("%s\n", gdb_signal_to_string (oursig));
}
/* Specify how various signals in the inferior should be handled. */
char **argv;
int digits, wordlen;
int sigfirst, signum, siglast;
- enum target_signal oursig;
+ enum gdb_signal oursig;
int allsigs;
int nsigs;
unsigned char *sigs;
/* Allocate and zero an array of flags for which signals to handle. */
- nsigs = (int) TARGET_SIGNAL_LAST;
+ nsigs = (int) GDB_SIGNAL_LAST;
sigs = (unsigned char *) alloca (nsigs);
memset (sigs, 0, nsigs);
SIGHUP, SIGINT, SIGALRM, etc. will work right anyway. */
sigfirst = siglast = (int)
- target_signal_from_command (atoi (*argv));
+ gdb_signal_from_command (atoi (*argv));
if ((*argv)[digits] == '-')
{
siglast = (int)
- target_signal_from_command (atoi ((*argv) + digits + 1));
+ gdb_signal_from_command (atoi ((*argv) + digits + 1));
}
if (sigfirst > siglast)
{
}
else
{
- oursig = target_signal_from_name (*argv);
- if (oursig != TARGET_SIGNAL_UNKNOWN)
+ oursig = gdb_signal_from_name (*argv);
+ if (oursig != GDB_SIGNAL_UNKNOWN)
{
sigfirst = siglast = (int) oursig;
}
for (signum = sigfirst; signum >= 0 && signum <= siglast; signum++)
{
- switch ((enum target_signal) signum)
+ switch ((enum gdb_signal) signum)
{
- case TARGET_SIGNAL_TRAP:
- case TARGET_SIGNAL_INT:
+ case GDB_SIGNAL_TRAP:
+ case GDB_SIGNAL_INT:
if (!allsigs && !sigs[signum])
{
if (query (_("%s is used by the debugger.\n\
Are you sure you want to change it? "),
- target_signal_to_name ((enum target_signal) signum)))
+ gdb_signal_to_name ((enum gdb_signal) signum)))
{
sigs[signum] = 1;
}
}
}
break;
- case TARGET_SIGNAL_0:
- case TARGET_SIGNAL_DEFAULT:
- case TARGET_SIGNAL_UNKNOWN:
+ case GDB_SIGNAL_0:
+ case GDB_SIGNAL_DEFAULT:
+ case GDB_SIGNAL_UNKNOWN:
/* Make sure that "all" doesn't print these. */
break;
default:
if (sigs[signum])
{
signal_cache_update (-1);
- target_pass_signals ((int) TARGET_SIGNAL_LAST, signal_pass);
+ target_pass_signals ((int) GDB_SIGNAL_LAST, signal_pass);
+ target_program_signals ((int) GDB_SIGNAL_LAST, signal_program);
if (from_tty)
{
do_cleanups (old_chain);
}
+/* Complete the "handle" command. */
+
+static VEC (char_ptr) *
+handle_completer (struct cmd_list_element *ignore,
+ const char *text, const char *word)
+{
+ VEC (char_ptr) *vec_signals, *vec_keywords, *return_val;
+ static const char * const keywords[] =
+ {
+ "all",
+ "stop",
+ "ignore",
+ "print",
+ "pass",
+ "nostop",
+ "noignore",
+ "noprint",
+ "nopass",
+ NULL,
+ };
+
+ vec_signals = signal_completer (ignore, text, word);
+ vec_keywords = complete_on_enum (keywords, word, word);
+
+ return_val = VEC_merge (char_ptr, vec_signals, vec_keywords);
+ VEC_free (char_ptr, vec_signals);
+ VEC_free (char_ptr, vec_keywords);
+ return return_val;
+}
+
static void
xdb_handle_command (char *args, int from_tty)
{
if (argBuf)
{
int validFlag = 1;
- enum target_signal oursig;
+ enum gdb_signal oursig;
- oursig = target_signal_from_name (argv[0]);
+ oursig = gdb_signal_from_name (argv[0]);
memset (argBuf, 0, bufLen);
if (strcmp (argv[1], "Q") == 0)
sprintf (argBuf, "%s %s", argv[0], "noprint");
do_cleanups (old_chain);
}
+enum gdb_signal
+gdb_signal_from_command (int num)
+{
+ if (num >= 1 && num <= 15)
+ return (enum gdb_signal) num;
+ error (_("Only signals 1-15 are valid as numeric signals.\n\
+Use \"info signals\" for a list of symbolic signals."));
+}
+
/* Print current contents of the tables set by the handle command.
It is possible we should just be printing signals actually used
by the current target (but for things to work right when switching
static void
signals_info (char *signum_exp, int from_tty)
{
- enum target_signal oursig;
+ enum gdb_signal oursig;
sig_print_header ();
if (signum_exp)
{
/* First see if this is a symbol name. */
- oursig = target_signal_from_name (signum_exp);
- if (oursig == TARGET_SIGNAL_UNKNOWN)
+ oursig = gdb_signal_from_name (signum_exp);
+ if (oursig == GDB_SIGNAL_UNKNOWN)
{
/* No, try numeric. */
oursig =
- target_signal_from_command (parse_and_eval_long (signum_exp));
+ gdb_signal_from_command (parse_and_eval_long (signum_exp));
}
sig_print_info (oursig);
return;
printf_filtered ("\n");
/* These ugly casts brought to you by the native VAX compiler. */
- for (oursig = TARGET_SIGNAL_FIRST;
- (int) oursig < (int) TARGET_SIGNAL_LAST;
- oursig = (enum target_signal) ((int) oursig + 1))
+ for (oursig = GDB_SIGNAL_FIRST;
+ (int) oursig < (int) GDB_SIGNAL_LAST;
+ oursig = (enum gdb_signal) ((int) oursig + 1))
{
QUIT;
- if (oursig != TARGET_SIGNAL_UNKNOWN
- && oursig != TARGET_SIGNAL_DEFAULT && oursig != TARGET_SIGNAL_0)
+ if (oursig != GDB_SIGNAL_UNKNOWN
+ && oursig != GDB_SIGNAL_DEFAULT && oursig != GDB_SIGNAL_0)
sig_print_info (oursig);
}
if there's no object available. */
static struct value *
-siginfo_make_value (struct gdbarch *gdbarch, struct internalvar *var)
+siginfo_make_value (struct gdbarch *gdbarch, struct internalvar *var,
+ void *ignore)
{
if (target_has_stack
&& !ptid_equal (inferior_ptid, null_ptid)
struct infcall_suspend_state
{
struct thread_suspend_state thread_suspend;
+#if 0 /* Currently unused and empty structures are not valid C. */
struct inferior_suspend_state inferior_suspend;
+#endif
/* Other fields: */
CORE_ADDR stop_pc;
{
struct infcall_suspend_state *inf_state;
struct thread_info *tp = inferior_thread ();
+#if 0
struct inferior *inf = current_inferior ();
+#endif
struct regcache *regcache = get_current_regcache ();
struct gdbarch *gdbarch = get_regcache_arch (regcache);
gdb_byte *siginfo_data = NULL;
}
inf_state->thread_suspend = tp->suspend;
+#if 0 /* Currently unused and empty structures are not valid C. */
inf_state->inferior_suspend = inf->suspend;
+#endif
/* run_inferior_call will not use the signal due to its `proceed' call with
- TARGET_SIGNAL_0 anyway. */
- tp->suspend.stop_signal = TARGET_SIGNAL_0;
+ GDB_SIGNAL_0 anyway. */
+ tp->suspend.stop_signal = GDB_SIGNAL_0;
inf_state->stop_pc = stop_pc;
restore_infcall_suspend_state (struct infcall_suspend_state *inf_state)
{
struct thread_info *tp = inferior_thread ();
+#if 0
struct inferior *inf = current_inferior ();
+#endif
struct regcache *regcache = get_current_regcache ();
struct gdbarch *gdbarch = get_regcache_arch (regcache);
tp->suspend = inf_state->thread_suspend;
+#if 0 /* Currently unused and empty structures are not valid C. */
inf->suspend = inf_state->inferior_suspend;
+#endif
stop_pc = inf_state->stop_pc;
if (inf_state->siginfo_gdbarch == gdbarch)
{
struct type *type = gdbarch_get_siginfo_type (gdbarch);
- size_t len = TYPE_LENGTH (type);
/* Errors ignored. */
target_write (¤t_target, TARGET_OBJECT_SIGNAL_INFO, NULL,
- inf_state->siginfo_data, 0, len);
+ inf_state->siginfo_data, 0, TYPE_LENGTH (type));
}
/* The inferior can be gone if the user types "print exit(0)"
"of all processes is %s.\n"), value);
}
+/* Implementation of `siginfo' variable. */
+
+static const struct internalvar_funcs siginfo_funcs =
+{
+ siginfo_make_value,
+ NULL,
+ NULL
+};
+
void
_initialize_infrun (void)
{
int i;
int numsigs;
+ struct cmd_list_element *c;
add_info ("signals", signals_info, _("\
What debugger does when program gets various signals.\n\
Specify a signal as argument to print info on that signal only."));
add_info_alias ("handle", "signals", 0);
- add_com ("handle", class_run, handle_command, _("\
-Specify how to handle a signal.\n\
+ c = add_com ("handle", class_run, handle_command, _("\
+Specify how to handle signals.\n\
+Usage: handle SIGNAL [ACTIONS]\n\
Args are signals and actions to apply to those signals.\n\
+If no actions are specified, the current settings for the specified signals\n\
+will be displayed instead.\n\
+\n\
Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\
from 1-15 are allowed for compatibility with old versions of GDB.\n\
Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\
The special arg \"all\" is recognized to mean all signals except those\n\
used by the debugger, typically SIGTRAP and SIGINT.\n\
+\n\
Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\
\"pass\", \"nopass\", \"ignore\", or \"noignore\".\n\
Stop means reenter debugger if this signal happens (implies print).\n\
Print means print a message if this signal happens.\n\
Pass means let program see this signal; otherwise program doesn't know.\n\
Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
-Pass and Stop may be combined."));
+Pass and Stop may be combined.\n\
+\n\
+Multiple signals may be specified. Signal numbers and signal names\n\
+may be interspersed with actions, with the actions being performed for\n\
+all signals cumulatively specified."));
+ set_cmd_completer (c, handle_completer);
+
if (xdb_commands)
{
add_com ("lz", class_info, signals_info, _("\
This allows you to set a list of commands to be run each time execution\n\
of the program stops."), &cmdlist);
- add_setshow_zinteger_cmd ("infrun", class_maintenance, &debug_infrun, _("\
+ add_setshow_zuinteger_cmd ("infrun", class_maintenance, &debug_infrun, _("\
Set inferior debugging."), _("\
Show inferior debugging."), _("\
When non-zero, inferior specific debugging is enabled."),
- NULL,
- show_debug_infrun,
- &setdebuglist, &showdebuglist);
+ NULL,
+ show_debug_infrun,
+ &setdebuglist, &showdebuglist);
add_setshow_boolean_cmd ("displaced", class_maintenance,
&debug_displaced, _("\
&setlist,
&showlist);
- numsigs = (int) TARGET_SIGNAL_LAST;
+ numsigs = (int) GDB_SIGNAL_LAST;
signal_stop = (unsigned char *) xmalloc (sizeof (signal_stop[0]) * numsigs);
signal_print = (unsigned char *)
xmalloc (sizeof (signal_print[0]) * numsigs);
signal_program = (unsigned char *)
xmalloc (sizeof (signal_program[0]) * numsigs);
+ signal_catch = (unsigned char *)
+ xmalloc (sizeof (signal_catch[0]) * numsigs);
signal_pass = (unsigned char *)
xmalloc (sizeof (signal_program[0]) * numsigs);
for (i = 0; i < numsigs; i++)
signal_stop[i] = 1;
signal_print[i] = 1;
signal_program[i] = 1;
+ signal_catch[i] = 0;
}
/* Signals caused by debugger's own actions
should not be given to the program afterwards. */
- signal_program[TARGET_SIGNAL_TRAP] = 0;
- signal_program[TARGET_SIGNAL_INT] = 0;
+ signal_program[GDB_SIGNAL_TRAP] = 0;
+ signal_program[GDB_SIGNAL_INT] = 0;
/* Signals that are not errors should not normally enter the debugger. */
- signal_stop[TARGET_SIGNAL_ALRM] = 0;
- signal_print[TARGET_SIGNAL_ALRM] = 0;
- signal_stop[TARGET_SIGNAL_VTALRM] = 0;
- signal_print[TARGET_SIGNAL_VTALRM] = 0;
- signal_stop[TARGET_SIGNAL_PROF] = 0;
- signal_print[TARGET_SIGNAL_PROF] = 0;
- signal_stop[TARGET_SIGNAL_CHLD] = 0;
- signal_print[TARGET_SIGNAL_CHLD] = 0;
- signal_stop[TARGET_SIGNAL_IO] = 0;
- signal_print[TARGET_SIGNAL_IO] = 0;
- signal_stop[TARGET_SIGNAL_POLL] = 0;
- signal_print[TARGET_SIGNAL_POLL] = 0;
- signal_stop[TARGET_SIGNAL_URG] = 0;
- signal_print[TARGET_SIGNAL_URG] = 0;
- signal_stop[TARGET_SIGNAL_WINCH] = 0;
- signal_print[TARGET_SIGNAL_WINCH] = 0;
- signal_stop[TARGET_SIGNAL_PRIO] = 0;
- signal_print[TARGET_SIGNAL_PRIO] = 0;
+ signal_stop[GDB_SIGNAL_ALRM] = 0;
+ signal_print[GDB_SIGNAL_ALRM] = 0;
+ signal_stop[GDB_SIGNAL_VTALRM] = 0;
+ signal_print[GDB_SIGNAL_VTALRM] = 0;
+ signal_stop[GDB_SIGNAL_PROF] = 0;
+ signal_print[GDB_SIGNAL_PROF] = 0;
+ signal_stop[GDB_SIGNAL_CHLD] = 0;
+ signal_print[GDB_SIGNAL_CHLD] = 0;
+ signal_stop[GDB_SIGNAL_IO] = 0;
+ signal_print[GDB_SIGNAL_IO] = 0;
+ signal_stop[GDB_SIGNAL_POLL] = 0;
+ signal_print[GDB_SIGNAL_POLL] = 0;
+ signal_stop[GDB_SIGNAL_URG] = 0;
+ signal_print[GDB_SIGNAL_URG] = 0;
+ signal_stop[GDB_SIGNAL_WINCH] = 0;
+ signal_print[GDB_SIGNAL_WINCH] = 0;
+ signal_stop[GDB_SIGNAL_PRIO] = 0;
+ signal_print[GDB_SIGNAL_PRIO] = 0;
/* These signals are used internally by user-level thread
implementations. (See signal(5) on Solaris.) Like the above
signals, a healthy program receives and handles them as part of
its normal operation. */
- signal_stop[TARGET_SIGNAL_LWP] = 0;
- signal_print[TARGET_SIGNAL_LWP] = 0;
- signal_stop[TARGET_SIGNAL_WAITING] = 0;
- signal_print[TARGET_SIGNAL_WAITING] = 0;
- signal_stop[TARGET_SIGNAL_CANCEL] = 0;
- signal_print[TARGET_SIGNAL_CANCEL] = 0;
+ signal_stop[GDB_SIGNAL_LWP] = 0;
+ signal_print[GDB_SIGNAL_LWP] = 0;
+ signal_stop[GDB_SIGNAL_WAITING] = 0;
+ signal_print[GDB_SIGNAL_WAITING] = 0;
+ signal_stop[GDB_SIGNAL_CANCEL] = 0;
+ signal_print[GDB_SIGNAL_CANCEL] = 0;
/* Update cached state. */
signal_cache_update (-1);
show_step_stop_if_no_debug,
&setlist, &showlist);
- add_setshow_enum_cmd ("displaced-stepping", class_run,
- can_use_displaced_stepping_enum,
- &can_use_displaced_stepping, _("\
+ add_setshow_auto_boolean_cmd ("displaced-stepping", class_run,
+ &can_use_displaced_stepping, _("\
Set debugger's willingness to use displaced stepping."), _("\
Show debugger's willingness to use displaced stepping."), _("\
If on, gdb will use displaced stepping to step over breakpoints if it is\n\
architecture. If auto (which is the default), gdb will use displaced stepping\n\
if the target architecture supports it and non-stop mode is active, but will not\n\
use it in all-stop mode (see help set non-stop)."),
- NULL,
- show_can_use_displaced_stepping,
- &setlist, &showlist);
+ NULL,
+ show_can_use_displaced_stepping,
+ &setlist, &showlist);
add_setshow_enum_cmd ("exec-direction", class_run, exec_direction_names,
&exec_direction, _("Set direction of execution.\n\
value with a void typed value, and when we get here, gdbarch
isn't initialized yet. At this point, we're quite sure there
isn't another convenience variable of the same name. */
- create_internalvar_type_lazy ("_siginfo", siginfo_make_value);
+ create_internalvar_type_lazy ("_siginfo", &siginfo_funcs, NULL);
add_setshow_boolean_cmd ("observer", no_class,
&observer_mode_1, _("\