/* Target-struct-independent code to start (run) and stop an inferior
process.
- Copyright (C) 1986-2015 Free Software Foundation, Inc.
+ Copyright (C) 1986-2016 Free Software Foundation, Inc.
This file is part of GDB.
fprintf_filtered (file, _("Mode of the step operation is %s.\n"), value);
}
-/* In asynchronous mode, but simulating synchronous execution. */
-
-int sync_execution = 0;
-
/* proceed and normal_stop use this to notify the user when the
inferior stopped in a different thread than it had been running
in. */
if (has_vforked
&& !non_stop /* Non-stop always resumes both branches. */
- && (!target_is_async_p () || sync_execution)
+ && current_ui->prompt_state == PROMPT_BLOCKED
&& !(follow_child || detach_fork || sched_multi))
{
/* The parent stays blocked inside the vfork syscall until the
/* Detach new forked process? */
if (detach_fork)
{
- struct cleanup *old_chain;
-
/* Before detaching from the child, remove all breakpoints
from it. If we forked, then this has already been taken
care of by infrun.c. If we vforked however, any
CORE_ADDR step_range_start = 0;
CORE_ADDR step_range_end = 0;
struct frame_id step_frame_id = { 0 };
- struct interp *command_interp = NULL;
+ struct thread_fsm *thread_fsm = NULL;
if (!non_stop)
{
step_frame_id = tp->control.step_frame_id;
exception_resume_breakpoint
= clone_momentary_breakpoint (tp->control.exception_resume_breakpoint);
- command_interp = tp->control.command_interp;
+ thread_fsm = tp->thread_fsm;
/* For now, delete the parent's sr breakpoint, otherwise,
parent/child sr breakpoints are considered duplicates,
tp->control.step_range_end = 0;
tp->control.step_frame_id = null_frame_id;
delete_exception_resume_breakpoint (tp);
- tp->control.command_interp = NULL;
+ tp->thread_fsm = NULL;
}
parent = inferior_ptid;
tp->control.step_frame_id = step_frame_id;
tp->control.exception_resume_breakpoint
= exception_resume_breakpoint;
- tp->control.command_interp = command_interp;
+ tp->thread_fsm = thread_fsm;
}
else
{
/* The instruction being stepped over triggers a nonsteppable
watchpoint. If true, we'll skip inserting watchpoints. */
int nonsteppable_watchpoint_p;
+
+ /* The thread's global number. */
+ int thread;
};
/* The step-over info of the location that is being stepped over.
static void
set_step_over_info (struct address_space *aspace, CORE_ADDR address,
- int nonsteppable_watchpoint_p)
+ int nonsteppable_watchpoint_p,
+ int thread)
{
step_over_info.aspace = aspace;
step_over_info.address = address;
step_over_info.nonsteppable_watchpoint_p = nonsteppable_watchpoint_p;
+ step_over_info.thread = thread;
}
/* Called when we're not longer stepping over a breakpoint / an
step_over_info.aspace = NULL;
step_over_info.address = 0;
step_over_info.nonsteppable_watchpoint_p = 0;
+ step_over_info.thread = -1;
}
/* See infrun.h. */
/* See infrun.h. */
+int
+thread_is_stepping_over_breakpoint (int thread)
+{
+ return (step_over_info.thread != -1
+ && thread == step_over_info.thread);
+}
+
+/* See infrun.h. */
+
int
stepping_past_nonsteppable_watchpoint (void)
{
{
struct displaced_step_inferior_state *displaced_state;
- if (ex.error != MEMORY_ERROR)
+ if (ex.error != MEMORY_ERROR
+ && ex.error != NOT_SUPPORTED_ERROR)
throw_exception (ex);
if (debug_infrun)
static void
infrun_thread_ptid_changed (ptid_t old_ptid, ptid_t new_ptid)
{
- struct displaced_step_request *it;
struct displaced_step_inferior_state *displaced;
if (ptid_equal (inferior_ptid, old_ptid))
stop_all_threads ();
set_step_over_info (get_regcache_aspace (regcache),
- regcache_read_pc (regcache), 0);
+ regcache_read_pc (regcache), 0, tp->global_num);
step = maybe_software_singlestep (gdbarch, pc);
tp->control.proceed_to_finish = 0;
- tp->control.command_interp = NULL;
tp->control.stepping_command = 0;
/* Discard any remaining commands or status from previous stop. */
static step_over_what
thread_still_needs_step_over (struct thread_info *tp)
{
- struct inferior *inf = find_inferior_ptid (tp->ptid);
step_over_what what = 0;
if (thread_still_needs_step_over_bp (tp))
if (siggnal != GDB_SIGNAL_DEFAULT)
tp->suspend.stop_signal = siggnal;
- /* Record the interpreter that issued the execution command that
- caused this thread to resume. If the top level interpreter is
- MI/async, and the execution command was a CLI command
- (next/step/etc.), we'll want to print stop event output to the MI
- console channel (the stepped-to line, etc.), as if the user
- entered the execution command on a real GDB console. */
- tp->control.command_interp = command_interp ();
-
resume_ptid = user_visible_resume_ptid (tp->control.stepping_command);
/* If an exception is thrown from this point on, make sure to
static void
reinstall_readline_callback_handler_cleanup (void *arg)
{
- if (!interpreter_async)
+ struct ui *ui = current_ui;
+
+ if (!ui->async)
{
/* We're not going back to the top level event loop yet. Don't
install the readline callback, as it'd prep the terminal,
return;
}
- if (async_command_editing_p && !sync_execution)
+ if (ui->command_editing && ui->prompt_state != PROMPT_BLOCKED)
gdb_rl_callback_handler_reinstall ();
}
struct thread_info *thr = ecs->event_thread;
if (thr != NULL && thr->thread_fsm != NULL)
- thread_fsm_clean_up (thr->thread_fsm);
+ thread_fsm_clean_up (thr->thread_fsm, thr);
if (!non_stop)
{
continue;
switch_to_thread (thr->ptid);
- thread_fsm_clean_up (thr->thread_fsm);
+ thread_fsm_clean_up (thr->thread_fsm, thr);
}
if (ecs->event_thread != NULL)
}
}
-/* A cleanup that restores the execution direction to the value saved
- in *ARG. */
+/* Helper for all_uis_check_sync_execution_done that works on the
+ current UI. */
static void
-restore_execution_direction (void *arg)
+check_curr_ui_sync_execution_done (void)
+{
+ struct ui *ui = current_ui;
+
+ if (ui->prompt_state == PROMPT_NEEDED
+ && ui->async
+ && !gdb_in_secondary_prompt_p (ui))
+ {
+ target_terminal_ours ();
+ observer_notify_sync_execution_done ();
+ ui_register_input_event_handler (ui);
+ }
+}
+
+/* See infrun.h. */
+
+void
+all_uis_check_sync_execution_done (void)
{
- enum exec_direction_kind *save_exec_dir = (enum exec_direction_kind *) arg;
+ struct switch_thru_all_uis state;
- execution_direction = *save_exec_dir;
+ SWITCH_THRU_ALL_UIS (state)
+ {
+ check_curr_ui_sync_execution_done ();
+ }
+}
+
+/* See infrun.h. */
+
+void
+all_uis_on_sync_execution_starting (void)
+{
+ struct switch_thru_all_uis state;
+
+ SWITCH_THRU_ALL_UIS (state)
+ {
+ if (current_ui->prompt_state == PROMPT_NEEDED)
+ async_disable_stdin ();
+ }
}
/* Asynchronous version of wait_for_inferior. It is called by the
struct execution_control_state *ecs = &ecss;
struct cleanup *old_chain = make_cleanup (null_cleanup, NULL);
struct cleanup *ts_old_chain;
- int was_sync = sync_execution;
- enum exec_direction_kind save_exec_dir = execution_direction;
int cmd_done = 0;
ptid_t waiton_ptid = minus_one_ptid;
memset (ecs, 0, sizeof (*ecs));
+ /* Events are always processed with the main UI as current UI. This
+ way, warnings, debug output, etc. are always consistently sent to
+ the main console. */
+ scoped_restore save_ui = make_scoped_restore (¤t_ui, main_ui);
+
/* End up with readline processing input, if necessary. */
make_cleanup (reinstall_readline_callback_handler_cleanup, NULL);
event. */
target_dcache_invalidate ();
- make_cleanup (restore_execution_direction, &save_exec_dir);
- execution_direction = target_execution_direction ();
+ scoped_restore save_exec_dir
+ = make_scoped_restore (&execution_direction, target_execution_direction ());
ecs->ptid = do_target_wait (waiton_ptid, &ecs->ws,
target_can_async_p () ? TARGET_WNOHANG : 0);
struct thread_fsm *thread_fsm = thr->thread_fsm;
if (thread_fsm != NULL)
- should_stop = thread_fsm_should_stop (thread_fsm);
+ should_stop = thread_fsm_should_stop (thread_fsm, thr);
}
if (!should_stop)
/* Revert thread and frame. */
do_cleanups (old_chain);
- /* If the inferior was in sync execution mode, and now isn't,
- restore the prompt (a synchronous execution command has finished,
- and we're ready for input). */
- if (interpreter_async && was_sync && !sync_execution)
- observer_notify_sync_execution_done ();
+ /* If a UI was in sync execution mode, and now isn't, restore its
+ prompt (a synchronous execution command has finished, and we're
+ ready for input). */
+ all_uis_check_sync_execution_done ();
if (cmd_done
- && !was_sync
&& exec_done_display_p
&& (ptid_equal (inferior_ptid, null_ptid)
|| !is_running (inferior_ptid)))
}
}
+/* A cleanup that disables thread create/exit events. */
+
+static void
+disable_thread_events (void *arg)
+{
+ target_thread_events (0);
+}
+
/* See infrun.h. */
void
entry_ptid = inferior_ptid;
old_chain = make_cleanup (switch_to_thread_cleanup, &entry_ptid);
+ target_thread_events (1);
+ make_cleanup (disable_thread_events, NULL);
+
/* Request threads to stop, and then wait for the stops. Because
threads we already know about can spawn more threads while we're
trying to stop them, and we only learn about new threads when we
{
/* All resumed threads exited. */
}
- else if (ws.kind == TARGET_WAITKIND_EXITED
+ else if (ws.kind == TARGET_WAITKIND_THREAD_EXITED
+ || ws.kind == TARGET_WAITKIND_EXITED
|| ws.kind == TARGET_WAITKIND_SIGNALLED)
{
if (debug_infrun)
{
enum gdb_signal sig;
struct regcache *regcache;
- struct address_space *aspace;
if (debug_infrun)
{
fprintf_unfiltered (gdb_stdlog, "infrun: stop_all_threads done\n");
}
+/* Handle a TARGET_WAITKIND_NO_RESUMED event. */
+
+static int
+handle_no_resumed (struct execution_control_state *ecs)
+{
+ struct inferior *inf;
+ struct thread_info *thread;
+
+ if (target_can_async_p ())
+ {
+ struct ui *ui;
+ int any_sync = 0;
+
+ ALL_UIS (ui)
+ {
+ if (ui->prompt_state == PROMPT_BLOCKED)
+ {
+ any_sync = 1;
+ break;
+ }
+ }
+ if (!any_sync)
+ {
+ /* There were no unwaited-for children left in the target, but,
+ we're not synchronously waiting for events either. Just
+ ignore. */
+
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: TARGET_WAITKIND_NO_RESUMED "
+ "(ignoring: bg)\n");
+ prepare_to_wait (ecs);
+ return 1;
+ }
+ }
+
+ /* Otherwise, if we were running a synchronous execution command, we
+ may need to cancel it and give the user back the terminal.
+
+ In non-stop mode, the target can't tell whether we've already
+ consumed previous stop events, so it can end up sending us a
+ no-resumed event like so:
+
+ #0 - thread 1 is left stopped
+
+ #1 - thread 2 is resumed and hits breakpoint
+ -> TARGET_WAITKIND_STOPPED
+
+ #2 - thread 3 is resumed and exits
+ this is the last resumed thread, so
+ -> TARGET_WAITKIND_NO_RESUMED
+
+ #3 - gdb processes stop for thread 2 and decides to re-resume
+ it.
+
+ #4 - gdb processes the TARGET_WAITKIND_NO_RESUMED event.
+ thread 2 is now resumed, so the event should be ignored.
+
+ IOW, if the stop for thread 2 doesn't end a foreground command,
+ then we need to ignore the following TARGET_WAITKIND_NO_RESUMED
+ event. But it could be that the event meant that thread 2 itself
+ (or whatever other thread was the last resumed thread) exited.
+
+ To address this we refresh the thread list and check whether we
+ have resumed threads _now_. In the example above, this removes
+ thread 3 from the thread list. If thread 2 was re-resumed, we
+ ignore this event. If we find no thread resumed, then we cancel
+ the synchronous command show "no unwaited-for " to the user. */
+ update_thread_list ();
+
+ ALL_NON_EXITED_THREADS (thread)
+ {
+ if (thread->executing
+ || thread->suspend.waitstatus_pending_p)
+ {
+ /* There were no unwaited-for children left in the target at
+ some point, but there are now. Just ignore. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: TARGET_WAITKIND_NO_RESUMED "
+ "(ignoring: found resumed)\n");
+ prepare_to_wait (ecs);
+ return 1;
+ }
+ }
+
+ /* Note however that we may find no resumed thread because the whole
+ process exited meanwhile (thus updating the thread list results
+ in an empty thread list). In this case we know we'll be getting
+ a process exit event shortly. */
+ ALL_INFERIORS (inf)
+ {
+ if (inf->pid == 0)
+ continue;
+
+ thread = any_live_thread_of_process (inf->pid);
+ if (thread == NULL)
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: TARGET_WAITKIND_NO_RESUMED "
+ "(expect process exit)\n");
+ prepare_to_wait (ecs);
+ return 1;
+ }
+ }
+
+ /* Go ahead and report the event. */
+ return 0;
+}
+
/* Given an execution control state that has been freshly filled in by
an event from the inferior, figure out what it means and take
appropriate action.
return;
}
- if (ecs->ws.kind == TARGET_WAITKIND_NO_RESUMED
- && target_can_async_p () && !sync_execution)
+ if (ecs->ws.kind == TARGET_WAITKIND_THREAD_EXITED)
{
- /* There were no unwaited-for children left in the target, but,
- we're not synchronously waiting for events either. Just
- ignore. Otherwise, if we were running a synchronous
- execution command, we need to cancel it and give the user
- back the terminal. */
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog,
- "infrun: TARGET_WAITKIND_NO_RESUMED (ignoring)\n");
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_THREAD_EXITED\n");
prepare_to_wait (ecs);
return;
}
+ if (ecs->ws.kind == TARGET_WAITKIND_NO_RESUMED
+ && handle_no_resumed (ecs))
+ return;
+
/* Cache the last pid/waitstatus. */
set_last_target_status (ecs->ptid, ecs->ws);
prepare_to_wait (ecs);
return;
+ case TARGET_WAITKIND_THREAD_CREATED:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_THREAD_CREATED\n");
+ if (!ptid_equal (ecs->ptid, inferior_ptid))
+ context_switch (ecs->ptid);
+ if (!switch_back_to_stepped_thread (ecs))
+ keep_going (ecs);
+ return;
+
case TARGET_WAITKIND_EXITED:
case TARGET_WAITKIND_SIGNALLED:
if (debug_infrun)
}
gdb_flush (gdb_stdout);
- target_mourn_inferior ();
+ target_mourn_inferior (inferior_ptid);
stop_print_frame = 0;
stop_waiting (ecs);
return;
parent = ecs->ptid;
child = ecs->ws.value.related_pid;
+ /* At this point, the parent is marked running, and the
+ child is marked stopped. */
+
+ /* If not resuming the parent, mark it stopped. */
+ if (follow_child && !detach_fork && !non_stop && !sched_multi)
+ set_running (parent, 0);
+
+ /* If resuming the child, mark it running. */
+ if (follow_child || (!detach_fork && (non_stop || sched_multi)))
+ set_running (child, 1);
+
/* In non-stop mode, also resume the other branch. */
if (!detach_fork && (non_stop
|| (sched_multi && target_is_non_stop_p ())))
restart_threads (struct thread_info *event_thread)
{
struct thread_info *tp;
- struct thread_info *step_over = NULL;
/* In case the instruction just stepped spawned a new thread. */
update_thread_list ();
context_switch (ecs->ptid);
if (deprecated_context_hook)
- deprecated_context_hook (pid_to_thread_id (ecs->ptid));
+ deprecated_context_hook (ptid_to_global_thread_id (ecs->ptid));
}
/* At this point, get hold of the now-current thread's frame. */
keep_going_stepped_thread (struct thread_info *tp)
{
struct frame_info *frame;
- struct gdbarch *gdbarch;
struct execution_control_state ecss;
struct execution_control_state *ecs = &ecss;
stop_pc = regcache_read_pc (get_thread_regcache (tp->ptid));
frame = get_current_frame ();
- gdbarch = get_frame_arch (frame);
/* If the PC of the thread we were trying to single-step has
changed, then that thread has trapped or been signaled, but the
/* set_momentary_breakpoint_at_pc invalidates FRAME. */
frame = NULL;
- bp->thread = tp->num;
+ bp->thread = tp->global_num;
inferior_thread ()->control.exception_resume_breakpoint = bp;
}
}
bp = set_momentary_breakpoint_at_pc (get_frame_arch (frame),
handler, bp_exception_resume);
- bp->thread = tp->num;
+ bp->thread = tp->global_num;
inferior_thread ()->control.exception_resume_breakpoint = bp;
}
&& (remove_wps || !use_displaced_stepping (ecs->event_thread)))
{
set_step_over_info (get_regcache_aspace (regcache),
- regcache_read_pc (regcache), remove_wps);
+ regcache_read_pc (regcache), remove_wps,
+ ecs->event_thread->global_num);
}
else if (remove_wps)
- set_step_over_info (NULL, 0, remove_wps);
+ set_step_over_info (NULL, 0, remove_wps, -1);
/* If we now need to do an in-line step-over, we need to stop
all other threads. Note this must be done before
}
}
+/* Some targets/architectures can do extra processing/display of
+ segmentation faults. E.g., Intel MPX boundary faults.
+ Call the architecture dependent function to handle the fault. */
+
+static void
+handle_segmentation_fault (struct ui_out *uiout)
+{
+ struct regcache *regcache = get_current_regcache ();
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+
+ if (gdbarch_handle_segmentation_fault_p (gdbarch))
+ gdbarch_handle_segmentation_fault (gdbarch, uiout);
+}
+
void
print_signal_received_reason (struct ui_out *uiout, enum gdb_signal siggnal)
{
+ struct thread_info *thr = inferior_thread ();
+
annotate_signal ();
- if (siggnal == GDB_SIGNAL_0 && !ui_out_is_mi_like_p (uiout))
+ if (ui_out_is_mi_like_p (uiout))
+ ;
+ else if (show_thread_that_caused_stop ())
{
- struct thread_info *t = inferior_thread ();
+ const char *name;
- ui_out_text (uiout, "\n[");
- ui_out_field_string (uiout, "thread-name",
- target_pid_to_str (t->ptid));
- ui_out_field_fmt (uiout, "thread-id", "] #%d", t->num);
- ui_out_text (uiout, " stopped");
+ ui_out_text (uiout, "\nThread ");
+ ui_out_field_fmt (uiout, "thread-id", "%s", print_thread_id (thr));
+
+ name = thr->name != NULL ? thr->name : target_thread_name (thr);
+ if (name != NULL)
+ {
+ ui_out_text (uiout, " \"");
+ ui_out_field_fmt (uiout, "name", "%s", name);
+ ui_out_text (uiout, "\"");
+ }
}
+ else
+ ui_out_text (uiout, "\nProgram");
+
+ if (siggnal == GDB_SIGNAL_0 && !ui_out_is_mi_like_p (uiout))
+ ui_out_text (uiout, " stopped");
else
{
- ui_out_text (uiout, "\nProgram received signal ");
+ ui_out_text (uiout, " received signal ");
annotate_signal_name ();
if (ui_out_is_mi_like_p (uiout))
ui_out_field_string
annotate_signal_string ();
ui_out_field_string (uiout, "signal-meaning",
gdb_signal_to_string (siggnal));
+
+ if (siggnal == GDB_SIGNAL_SEGV)
+ handle_segmentation_fault (uiout);
+
annotate_signal_string_end ();
}
ui_out_text (uiout, ".\n");
print_stack_frame (get_selected_frame (NULL), 0, source_flag, 1);
}
-/* Cleanup that restores a previous current uiout. */
-
-static void
-restore_current_uiout_cleanup (void *arg)
-{
- struct ui_out *saved_uiout = (struct ui_out *) arg;
-
- current_uiout = saved_uiout;
-}
-
/* See infrun.h. */
void
get_last_target_status (&last_ptid, &last);
- old_chain = make_cleanup (restore_current_uiout_cleanup, current_uiout);
+ old_chain = make_cleanup_restore_current_uiout ();
current_uiout = uiout;
print_stop_location (&last);
ptid_t last_ptid;
struct cleanup *old_chain = make_cleanup (null_cleanup, NULL);
ptid_t pid_ptid;
+ struct switch_thru_all_uis state;
get_last_target_status (&last_ptid, &last);
&& last.kind != TARGET_WAITKIND_EXITED
&& last.kind != TARGET_WAITKIND_NO_RESUMED)
{
- target_terminal_ours_for_output ();
- printf_filtered (_("[Switching to %s]\n"),
- target_pid_to_str (inferior_ptid));
- annotate_thread_changed ();
+ SWITCH_THRU_ALL_UIS (state)
+ {
+ target_terminal_ours_for_output ();
+ printf_filtered (_("[Switching to %s]\n"),
+ target_pid_to_str (inferior_ptid));
+ annotate_thread_changed ();
+ }
previous_inferior_ptid = inferior_ptid;
}
if (last.kind == TARGET_WAITKIND_NO_RESUMED)
{
- gdb_assert (sync_execution || !target_can_async_p ());
-
- target_terminal_ours_for_output ();
- printf_filtered (_("No unwaited-for children left.\n"));
+ SWITCH_THRU_ALL_UIS (state)
+ if (current_ui->prompt_state == PROMPT_BLOCKED)
+ {
+ target_terminal_ours_for_output ();
+ printf_filtered (_("No unwaited-for children left.\n"));
+ }
}
/* Note: this depends on the update_thread_list call above. */
if (stopped_by_random_signal)
disable_current_display ();
- target_terminal_ours ();
- async_enable_stdin ();
+ SWITCH_THRU_ALL_UIS (state)
+ {
+ async_enable_stdin ();
+ }
/* Let the user/frontend see the threads as stopped. */
do_cleanups (old_chain);
"to change these tables.\n"));
}
-/* Check if it makes sense to read $_siginfo from the current thread
- at this point. If not, throw an error. */
-
-static void
-validate_siginfo_access (void)
-{
- /* No current inferior, no siginfo. */
- if (ptid_equal (inferior_ptid, null_ptid))
- error (_("No thread selected."));
-
- /* Don't try to read from a dead thread. */
- if (is_exited (inferior_ptid))
- error (_("The current thread has terminated"));
-
- /* ... or from a spinning thread. */
- if (is_running (inferior_ptid))
- error (_("Selected thread is running."));
-}
-
/* The $_siginfo convenience variable is a bit special. We don't know
for sure the type of the value until we actually have a chance to
fetch the data. The type can change depending on gdbarch, so it is
{
LONGEST transferred;
- validate_siginfo_access ();
+ /* If we can access registers, so can we access $_siginfo. Likewise
+ vice versa. */
+ validate_registers_access ();
transferred =
target_read (¤t_target, TARGET_OBJECT_SIGNAL_INFO,
{
LONGEST transferred;
- validate_siginfo_access ();
+ /* If we can access registers, so can we access $_siginfo. Likewise
+ vice versa. */
+ validate_registers_access ();
transferred = target_write (¤t_target,
TARGET_OBJECT_SIGNAL_INFO,
signal_print[GDB_SIGNAL_WAITING] = 0;
signal_stop[GDB_SIGNAL_CANCEL] = 0;
signal_print[GDB_SIGNAL_CANCEL] = 0;
+ signal_stop[GDB_SIGNAL_LIBRT] = 0;
+ signal_print[GDB_SIGNAL_LIBRT] = 0;
/* Update cached state. */
signal_cache_update (-1);
projects / deliverable / binutils-gdb.git / blobdiff