process.
Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994,
- 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 Free Software
- Foundation, Inc.
+ 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free
+ Software Foundation, Inc.
This file is part of GDB.
#include "inf-loop.h"
#include "regcache.h"
#include "value.h"
+#include "observer.h"
+#include "language.h"
+#include "gdb_assert.h"
/* Prototypes for local functions */
static void delete_breakpoint_current_contents (void *);
-static void set_follow_fork_mode_command (char *arg, int from_tty,
- struct cmd_list_element *c);
-
static int restore_selected_frame (void *);
static void build_infrun (void);
-static void follow_inferior_fork (int parent_pid, int child_pid,
- int has_forked, int has_vforked);
-
-static void follow_fork (int parent_pid, int child_pid);
-
-static void follow_vfork (int parent_pid, int child_pid);
+static int follow_fork (void);
static void set_schedlock_func (char *args, int from_tty,
struct cmd_list_element *c);
static void xdb_handle_command (char *args, int from_tty);
+static int prepare_to_proceed (void);
+
void _initialize_infrun (void);
int inferior_ignoring_startup_exec_events = 0;
static int may_follow_exec = MAY_FOLLOW_EXEC;
-/* Dynamic function trampolines are similar to solib trampolines in that they
- are between the caller and the callee. The difference is that when you
- enter a dynamic trampoline, you can't determine the callee's address. Some
- (usually complex) code needs to run in the dynamic trampoline to figure out
- the callee's address. This macro is usually called twice. First, when we
- enter the trampoline (looks like a normal function call at that point). It
- should return the PC of a point within the trampoline where the callee's
- address is known. Second, when we hit the breakpoint, this routine returns
- the callee's address. At that point, things proceed as per a step resume
- breakpoint. */
-
-#ifndef DYNAMIC_TRAMPOLINE_NEXTPC
-#define DYNAMIC_TRAMPOLINE_NEXTPC(pc) 0
-#endif
-
/* If the program uses ELF-style shared libraries, then calls to
functions in shared libraries go through stubs, which live in a
table called the PLT (Procedure Linkage Table). The first time the
#define IN_SOLIB_DYNSYM_RESOLVE_CODE(pc) 0
#endif
-#ifndef SKIP_SOLIB_RESOLVER
-#define SKIP_SOLIB_RESOLVER(pc) 0
-#endif
-
/* This function returns TRUE if pc is the address of an instruction
that lies within the dynamic linker (such as the event hook, or the
dld itself).
#define HAVE_STEPPABLE_WATCHPOINT 1
#endif
-#ifndef HAVE_NONSTEPPABLE_WATCHPOINT
-#define HAVE_NONSTEPPABLE_WATCHPOINT 0
-#else
-#undef HAVE_NONSTEPPABLE_WATCHPOINT
-#define HAVE_NONSTEPPABLE_WATCHPOINT 1
-#endif
-
-#ifndef HAVE_CONTINUABLE_WATCHPOINT
-#define HAVE_CONTINUABLE_WATCHPOINT 0
-#else
-#undef HAVE_CONTINUABLE_WATCHPOINT
-#define HAVE_CONTINUABLE_WATCHPOINT 1
-#endif
-
#ifndef CANNOT_STEP_HW_WATCHPOINTS
#define CANNOT_STEP_HW_WATCHPOINTS 0
#else
when running in the shell before the child program has been exec'd;
and when running some kinds of remote stuff (FIXME?). */
-int stop_soon_quietly;
+enum stop_kind stop_soon;
/* Nonzero if proceed is being used for a "finish" command or a similar
situation when stop_registers should be saved. */
struct
{
int parent_pid;
- int saw_parent_fork;
int child_pid;
- int saw_child_fork;
- int saw_child_exec;
}
fork_event;
char *execd_pathname;
}
pending_follow;
-/* Some platforms don't allow us to do anything meaningful with a
- vforked child until it has exec'd. Vforked processes on such
- platforms can only be followed after they've exec'd.
-
- When this is set to 0, a vfork can be immediately followed,
- and an exec can be followed merely as an exec. When this is
- set to 1, a vfork event has been seen, but cannot be followed
- until the exec is seen.
-
- (In the latter case, inferior_ptid is still the parent of the
- vfork, and pending_follow.fork_event.child_pid is the child. The
- appropriate process is followed, according to the setting of
- follow-fork-mode.) */
-static int follow_vfork_when_exec;
-
-static const char follow_fork_mode_ask[] = "ask";
-static const char follow_fork_mode_both[] = "both";
static const char follow_fork_mode_child[] = "child";
static const char follow_fork_mode_parent[] = "parent";
static const char *follow_fork_mode_kind_names[] = {
- follow_fork_mode_ask,
- /* ??rehrauer: The "both" option is broken, by what may be a 10.20
- kernel problem. It's also not terribly useful without a GUI to
- help the user drive two debuggers. So for now, I'm disabling the
- "both" option. */
- /* follow_fork_mode_both, */
follow_fork_mode_child,
follow_fork_mode_parent,
NULL
static const char *follow_fork_mode_string = follow_fork_mode_parent;
\f
-static void
-follow_inferior_fork (int parent_pid, int child_pid, int has_forked,
- int has_vforked)
+static int
+follow_fork (void)
{
- int followed_parent = 0;
- int followed_child = 0;
-
- /* Which process did the user want us to follow? */
- const char *follow_mode = follow_fork_mode_string;
-
- /* Or, did the user not know, and want us to ask? */
- if (follow_fork_mode_string == follow_fork_mode_ask)
- {
- internal_error (__FILE__, __LINE__,
- "follow_inferior_fork: \"ask\" mode not implemented");
- /* follow_mode = follow_fork_mode_...; */
- }
-
- /* If we're to be following the parent, then detach from child_pid.
- We're already following the parent, so need do nothing explicit
- for it. */
- if (follow_mode == follow_fork_mode_parent)
- {
- followed_parent = 1;
-
- /* We're already attached to the parent, by default. */
-
- /* Before detaching from the child, remove all breakpoints from
- it. (This won't actually modify the breakpoint list, but will
- physically remove the breakpoints from the child.) */
- if (!has_vforked || !follow_vfork_when_exec)
- {
- detach_breakpoints (child_pid);
-#ifdef SOLIB_REMOVE_INFERIOR_HOOK
- SOLIB_REMOVE_INFERIOR_HOOK (child_pid);
-#endif
- }
-
- /* Detach from the child. */
- dont_repeat ();
-
- target_require_detach (child_pid, "", 1);
- }
-
- /* If we're to be following the child, then attach to it, detach
- from inferior_ptid, and set inferior_ptid to child_pid. */
- else if (follow_mode == follow_fork_mode_child)
- {
- char child_pid_spelling[100]; /* Arbitrary length. */
-
- followed_child = 1;
-
- /* Before detaching from the parent, detach all breakpoints from
- the child. But only if we're forking, or if we follow vforks
- as soon as they happen. (If we're following vforks only when
- the child has exec'd, then it's very wrong to try to write
- back the "shadow contents" of inserted breakpoints now -- they
- belong to the child's pre-exec'd a.out.) */
- if (!has_vforked || !follow_vfork_when_exec)
- {
- detach_breakpoints (child_pid);
- }
-
- /* Before detaching from the parent, remove all breakpoints from it. */
- remove_breakpoints ();
-
- /* Also reset the solib inferior hook from the parent. */
-#ifdef SOLIB_REMOVE_INFERIOR_HOOK
- SOLIB_REMOVE_INFERIOR_HOOK (PIDGET (inferior_ptid));
-#endif
-
- /* Detach from the parent. */
- dont_repeat ();
- target_detach (NULL, 1);
-
- /* Attach to the child. */
- inferior_ptid = pid_to_ptid (child_pid);
- sprintf (child_pid_spelling, "%d", child_pid);
- dont_repeat ();
-
- target_require_attach (child_pid_spelling, 1);
-
- /* Was there a step_resume breakpoint? (There was if the user
- did a "next" at the fork() call.) If so, explicitly reset its
- thread number.
-
- step_resumes are a form of bp that are made to be per-thread.
- Since we created the step_resume bp when the parent process
- was being debugged, and now are switching to the child process,
- from the breakpoint package's viewpoint, that's a switch of
- "threads". We must update the bp's notion of which thread
- it is for, or it'll be ignored when it triggers... */
- if (step_resume_breakpoint && (!has_vforked || !follow_vfork_when_exec))
- breakpoint_re_set_thread (step_resume_breakpoint);
-
- /* Reinsert all breakpoints in the child. (The user may've set
- breakpoints after catching the fork, in which case those
- actually didn't get set in the child, but only in the parent.) */
- if (!has_vforked || !follow_vfork_when_exec)
- {
- breakpoint_re_set ();
- insert_breakpoints ();
- }
- }
-
- /* If we're to be following both parent and child, then fork ourselves,
- and attach the debugger clone to the child. */
- else if (follow_mode == follow_fork_mode_both)
- {
- char pid_suffix[100]; /* Arbitrary length. */
-
- /* Clone ourselves to follow the child. This is the end of our
- involvement with child_pid; our clone will take it from here... */
- dont_repeat ();
- target_clone_and_follow_inferior (child_pid, &followed_child);
- followed_parent = !followed_child;
-
- /* We continue to follow the parent. To help distinguish the two
- debuggers, though, both we and our clone will reset our prompts. */
- sprintf (pid_suffix, "[%d] ", PIDGET (inferior_ptid));
- set_prompt (strcat (get_prompt (), pid_suffix));
- }
-
- /* The parent and child of a vfork share the same address space.
- Also, on some targets the order in which vfork and exec events
- are received for parent in child requires some delicate handling
- of the events.
-
- For instance, on ptrace-based HPUX we receive the child's vfork
- event first, at which time the parent has been suspended by the
- OS and is essentially untouchable until the child's exit or second
- exec event arrives. At that time, the parent's vfork event is
- delivered to us, and that's when we see and decide how to follow
- the vfork. But to get to that point, we must continue the child
- until it execs or exits. To do that smoothly, all breakpoints
- must be removed from the child, in case there are any set between
- the vfork() and exec() calls. But removing them from the child
- also removes them from the parent, due to the shared-address-space
- nature of a vfork'd parent and child. On HPUX, therefore, we must
- take care to restore the bp's to the parent before we continue it.
- Else, it's likely that we may not stop in the expected place. (The
- worst scenario is when the user tries to step over a vfork() call;
- the step-resume bp must be restored for the step to properly stop
- in the parent after the call completes!)
-
- Sequence of events, as reported to gdb from HPUX:
-
- Parent Child Action for gdb to take
- -------------------------------------------------------
- 1 VFORK Continue child
- 2 EXEC
- 3 EXEC or EXIT
- 4 VFORK */
- if (has_vforked)
- {
- target_post_follow_vfork (parent_pid,
- followed_parent, child_pid, followed_child);
- }
+ int follow_child = (follow_fork_mode_string == follow_fork_mode_child);
- pending_follow.fork_event.saw_parent_fork = 0;
- pending_follow.fork_event.saw_child_fork = 0;
+ return target_follow_fork (follow_child);
}
-static void
-follow_fork (int parent_pid, int child_pid)
+void
+follow_inferior_reset_breakpoints (void)
{
- follow_inferior_fork (parent_pid, child_pid, 1, 0);
-}
+ /* Was there a step_resume breakpoint? (There was if the user
+ did a "next" at the fork() call.) If so, explicitly reset its
+ thread number.
+ step_resumes are a form of bp that are made to be per-thread.
+ Since we created the step_resume bp when the parent process
+ was being debugged, and now are switching to the child process,
+ from the breakpoint package's viewpoint, that's a switch of
+ "threads". We must update the bp's notion of which thread
+ it is for, or it'll be ignored when it triggers. */
-/* Forward declaration. */
-static void follow_exec (int, char *);
+ if (step_resume_breakpoint)
+ breakpoint_re_set_thread (step_resume_breakpoint);
-static void
-follow_vfork (int parent_pid, int child_pid)
-{
- follow_inferior_fork (parent_pid, child_pid, 0, 1);
+ /* Reinsert all breakpoints in the child. The user may have set
+ breakpoints after catching the fork, in which case those
+ were never set in the child, but only in the parent. This makes
+ sure the inserted breakpoints match the breakpoint list. */
- /* Did we follow the child? Had it exec'd before we saw the parent vfork? */
- if (pending_follow.fork_event.saw_child_exec
- && (PIDGET (inferior_ptid) == child_pid))
- {
- pending_follow.fork_event.saw_child_exec = 0;
- pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
- follow_exec (PIDGET (inferior_ptid), pending_follow.execd_pathname);
- xfree (pending_follow.execd_pathname);
- }
+ breakpoint_re_set ();
+ insert_breakpoints ();
}
/* EXECD_PATHNAME is assumed to be non-NULL. */
if (!may_follow_exec)
return;
- /* Did this exec() follow a vfork()? If so, we must follow the
- vfork now too. Do it before following the exec. */
- if (follow_vfork_when_exec &&
- (pending_follow.kind == TARGET_WAITKIND_VFORKED))
- {
- pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
- follow_vfork (PIDGET (inferior_ptid),
- pending_follow.fork_event.child_pid);
- follow_vfork_when_exec = 0;
- saved_pid = PIDGET (inferior_ptid);
-
- /* Did we follow the parent? If so, we're done. If we followed
- the child then we must also follow its exec(). */
- if (PIDGET (inferior_ptid) == pending_follow.fork_event.parent_pid)
- return;
- }
-
/* This is an exec event that we actually wish to pay attention to.
Refresh our symbol table to the newly exec'd program, remove any
momentary bp's, etc.
because we cannot remove the breakpoints in the inferior process
until after the `wait' in `wait_for_inferior'. */
static int singlestep_breakpoints_inserted_p = 0;
+
+/* The thread we inserted single-step breakpoints for. */
+static ptid_t singlestep_ptid;
+
+/* If another thread hit the singlestep breakpoint, we save the original
+ thread here so that we can resume single-stepping it later. */
+static ptid_t saved_singlestep_ptid;
+static int stepping_past_singlestep_breakpoint;
\f
/* Things to clean up if we QUIT out of resume (). */
-/* ARGSUSED */
static void
resume_cleanups (void *ignore)
{
the set command passed as a parameter. The clone operation will
include (BUG?) any ``set'' command callback, if present.
Commands like ``info set'' call all the ``show'' command
- callbacks. Unfortunatly, for ``show'' commands cloned from
+ callbacks. Unfortunately, for ``show'' commands cloned from
``set'', this includes callbacks belonging to ``set'' commands.
Making this worse, this only occures if add_show_from_set() is
called after add_cmd_sfunc() (BUG?). */
/* and do not pull these breakpoints until after a `wait' in
`wait_for_inferior' */
singlestep_breakpoints_inserted_p = 1;
+ singlestep_ptid = inferior_ptid;
}
/* Handle any optimized stores to the inferior NOW... */
#endif
/* If there were any forks/vforks/execs that were caught and are
- now to be followed, then do so. */
+ now to be followed, then do so. */
switch (pending_follow.kind)
{
- case (TARGET_WAITKIND_FORKED):
+ case TARGET_WAITKIND_FORKED:
+ case TARGET_WAITKIND_VFORKED:
pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
- follow_fork (PIDGET (inferior_ptid),
- pending_follow.fork_event.child_pid);
+ if (follow_fork ())
+ should_resume = 0;
break;
- case (TARGET_WAITKIND_VFORKED):
- {
- int saw_child_exec = pending_follow.fork_event.saw_child_exec;
-
- pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
- follow_vfork (PIDGET (inferior_ptid),
- pending_follow.fork_event.child_pid);
-
- /* Did we follow the child, but not yet see the child's exec event?
- If so, then it actually ought to be waiting for us; we respond to
- parent vfork events. We don't actually want to resume the child
- in this situation; we want to just get its exec event. */
- if (!saw_child_exec &&
- (PIDGET (inferior_ptid) == pending_follow.fork_event.child_pid))
- should_resume = 0;
- }
- break;
-
- case (TARGET_WAITKIND_EXECD):
- /* If we saw a vfork event but couldn't follow it until we saw
- an exec, then now might be the time! */
- pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
+ case TARGET_WAITKIND_EXECD:
/* follow_exec is called as soon as the exec event is seen. */
+ pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
break;
default:
resume_ptid = RESUME_ALL; /* Default */
if ((step || singlestep_breakpoints_inserted_p) &&
- !breakpoints_inserted && breakpoint_here_p (read_pc ()))
+ (stepping_past_singlestep_breakpoint
+ || (!breakpoints_inserted && breakpoint_here_p (read_pc ()))))
{
/* Stepping past a breakpoint without inserting breakpoints.
Make sure only the current thread gets to step, so that
resume_ptid = inferior_ptid;
}
-#ifdef CANNOT_STEP_BREAKPOINT
- /* Most targets can step a breakpoint instruction, thus executing it
- normally. But if this one cannot, just continue and we will hit
- it anyway. */
- if (step && breakpoints_inserted && breakpoint_here_p (read_pc ()))
- step = 0;
-#endif
+ if (CANNOT_STEP_BREAKPOINT)
+ {
+ /* Most targets can step a breakpoint instruction, thus
+ executing it normally. But if this one cannot, just
+ continue and we will hit it anyway. */
+ if (step && breakpoints_inserted && breakpoint_here_p (read_pc ()))
+ step = 0;
+ }
target_resume (resume_ptid, step, sig);
}
trap_expected = 0;
step_range_start = 0;
step_range_end = 0;
- step_frame_address = 0;
+ step_frame_id = null_frame_id;
step_over_calls = STEP_OVER_UNDEBUGGABLE;
stop_after_trap = 0;
- stop_soon_quietly = 0;
+ stop_soon = NO_STOP_QUIETLY;
proceed_to_finish = 0;
breakpoint_proceeded = 1; /* We're about to proceed... */
bpstat_clear (&stop_bpstat);
}
+/* This should be suitable for any targets that support threads. */
+
+static int
+prepare_to_proceed (void)
+{
+ ptid_t wait_ptid;
+ struct target_waitstatus wait_status;
+
+ /* Get the last target status returned by target_wait(). */
+ get_last_target_status (&wait_ptid, &wait_status);
+
+ /* Make sure we were stopped either at a breakpoint, or because
+ of a Ctrl-C. */
+ if (wait_status.kind != TARGET_WAITKIND_STOPPED
+ || (wait_status.value.sig != TARGET_SIGNAL_TRAP &&
+ wait_status.value.sig != TARGET_SIGNAL_INT))
+ {
+ return 0;
+ }
+
+ if (!ptid_equal (wait_ptid, minus_one_ptid)
+ && !ptid_equal (inferior_ptid, wait_ptid))
+ {
+ /* Switched over from WAIT_PID. */
+ CORE_ADDR wait_pc = read_pc_pid (wait_ptid);
+
+ if (wait_pc != read_pc ())
+ {
+ /* Switch back to WAIT_PID thread. */
+ inferior_ptid = wait_ptid;
+
+ /* FIXME: This stuff came from switch_to_thread() in
+ thread.c (which should probably be a public function). */
+ flush_cached_frames ();
+ registers_changed ();
+ stop_pc = wait_pc;
+ select_frame (get_current_frame ());
+ }
+
+ /* We return 1 to indicate that there is a breakpoint here,
+ so we need to step over it before continuing to avoid
+ hitting it straight away. */
+ if (breakpoint_here_p (wait_pc))
+ return 1;
+ }
+
+ return 0;
+
+}
+
+/* Record the pc of the program the last time it stopped. This is
+ just used internally by wait_for_inferior, but need to be preserved
+ over calls to it and cleared when the inferior is started. */
+static CORE_ADDR prev_pc;
+
/* Basic routine for continuing the program in various fashions.
ADDR is the address to resume at, or -1 for resume where stopped.
write_pc (addr);
}
-#ifdef PREPARE_TO_PROCEED
/* In a multi-threaded task we may select another thread
and then continue or step.
any execution (i.e. it will report a breakpoint hit
incorrectly). So we must step over it first.
- PREPARE_TO_PROCEED checks the current thread against the thread
+ prepare_to_proceed checks the current thread against the thread
that reported the most recent event. If a step-over is required
it returns TRUE and sets the current thread to the old thread. */
- if (PREPARE_TO_PROCEED (1) && breakpoint_here_p (read_pc ()))
- {
- oneproc = 1;
- }
-
-#endif /* PREPARE_TO_PROCEED */
+ if (prepare_to_proceed () && breakpoint_here_p (read_pc ()))
+ oneproc = 1;
#ifdef HP_OS_BUG
if (trap_expected_after_continue)
inferior. */
gdb_flush (gdb_stdout);
+ /* Refresh prev_pc value just prior to resuming. This used to be
+ done in stop_stepping, however, setting prev_pc there did not handle
+ scenarios such as inferior function calls or returning from
+ a function via the return command. In those cases, the prev_pc
+ value was not set properly for subsequent commands. The prev_pc value
+ is used to initialize the starting line number in the ecs. With an
+ invalid value, the gdb next command ends up stopping at the position
+ represented by the next line table entry past our start position.
+ On platforms that generate one line table entry per line, this
+ is not a problem. However, on the ia64, the compiler generates
+ extraneous line table entries that do not increase the line number.
+ When we issue the gdb next command on the ia64 after an inferior call
+ or a return command, we often end up a few instructions forward, still
+ within the original line we started.
+
+ An attempt was made to have init_execution_control_state () refresh
+ the prev_pc value before calculating the line number. This approach
+ did not work because on platforms that use ptrace, the pc register
+ cannot be read unless the inferior is stopped. At that point, we
+ are not guaranteed the inferior is stopped and so the read_pc ()
+ call can fail. Setting the prev_pc value here ensures the value is
+ updated correctly when the inferior is stopped. */
+ prev_pc = read_pc ();
+
/* Resume inferior. */
resume (oneproc || step || bpstat_should_step (), stop_signal);
normal_stop ();
}
}
-
-/* Record the pc and sp of the program the last time it stopped.
- These are just used internally by wait_for_inferior, but need
- to be preserved over calls to it and cleared when the inferior
- is started. */
-static CORE_ADDR prev_pc;
-static CORE_ADDR prev_func_start;
-static char *prev_func_name;
\f
/* Start remote-debugging of a machine over a serial link. */
{
init_thread_list ();
init_wait_for_inferior ();
- stop_soon_quietly = 1;
+ stop_soon = STOP_QUIETLY;
trap_expected = 0;
/* Always go on waiting for the target, regardless of the mode. */
{
/* These are meaningless until the first time through wait_for_inferior. */
prev_pc = 0;
- prev_func_start = 0;
- prev_func_name = NULL;
#ifdef HP_OS_BUG
trap_expected_after_continue = 0;
/* The first resume is not following a fork/vfork/exec. */
pending_follow.kind = TARGET_WAITKIND_SPURIOUS; /* I.e., none. */
- pending_follow.fork_event.saw_parent_fork = 0;
- pending_follow.fork_event.saw_child_fork = 0;
- pending_follow.fork_event.saw_child_exec = 0;
/* See wait_for_inferior's handling of SYSCALL_ENTRY/RETURN events. */
number_of_threads_in_syscalls = 0;
clear_proceed_status ();
+
+ stepping_past_singlestep_breakpoint = 0;
}
static void
void init_execution_control_state (struct execution_control_state *ecs);
+static void handle_step_into_function (struct execution_control_state *ecs);
void handle_inferior_event (struct execution_control_state *ecs);
static void check_sigtramp2 (struct execution_control_state *ecs);
{ /* Perform infrun state context switch: */
/* Save infrun state for the old thread. */
save_infrun_state (inferior_ptid, prev_pc,
- prev_func_start, prev_func_name,
trap_expected, step_resume_breakpoint,
through_sigtramp_breakpoint, step_range_start,
- step_range_end, step_frame_address,
+ step_range_end, &step_frame_id,
ecs->handling_longjmp, ecs->another_trap,
ecs->stepping_through_solib_after_catch,
ecs->stepping_through_solib_catchpoints,
/* Load infrun state for the new thread. */
load_infrun_state (ecs->ptid, &prev_pc,
- &prev_func_start, &prev_func_name,
&trap_expected, &step_resume_breakpoint,
&through_sigtramp_breakpoint, &step_range_start,
- &step_range_end, &step_frame_address,
+ &step_range_end, &step_frame_id,
&ecs->handling_longjmp, &ecs->another_trap,
&ecs->stepping_through_solib_after_catch,
&ecs->stepping_through_solib_catchpoints,
inferior_ptid = ecs->ptid;
}
+/* Wrapper for DEPRECATED_PC_IN_SIGTRAMP that takes care of the need
+ to find the function's name.
+
+ In a classic example of "left hand VS right hand", "infrun.c" was
+ trying to improve GDB's performance by caching the result of calls
+ to calls to find_pc_partial_funtion, while at the same time
+ find_pc_partial_function was also trying to ramp up performance by
+ caching its most recent return value. The below makes the the
+ function find_pc_partial_function solely responsibile for
+ performance issues (the local cache that relied on a global
+ variable - arrrggg - deleted).
+
+ Using the testsuite and gcov, it was found that dropping the local
+ "infrun.c" cache and instead relying on find_pc_partial_function
+ increased the number of calls to 12000 (from 10000), but the number
+ of times find_pc_partial_function's cache missed (this is what
+ matters) was only increased by only 4 (to 3569). (A quick back of
+ envelope caculation suggests that the extra 2000 function calls
+ @1000 extra instructions per call make the 1 MIP VAX testsuite run
+ take two extra seconds, oops :-)
+
+ Long term, this function can be eliminated, replaced by the code:
+ get_frame_type(current_frame()) == SIGTRAMP_FRAME (for new
+ architectures this is very cheap). */
+
+static int
+pc_in_sigtramp (CORE_ADDR pc)
+{
+ char *name;
+ find_pc_partial_function (pc, &name, NULL, NULL);
+ return DEPRECATED_PC_IN_SIGTRAMP (pc, name);
+}
+
+/* Handle the inferior event in the cases when we just stepped
+ into a function. */
+
+static void
+handle_step_into_function (struct execution_control_state *ecs)
+{
+ CORE_ADDR real_stop_pc;
+
+ if ((step_over_calls == STEP_OVER_NONE)
+ || ((step_range_end == 1)
+ && in_prologue (prev_pc, ecs->stop_func_start)))
+ {
+ /* I presume that step_over_calls is only 0 when we're
+ supposed to be stepping at the assembly language level
+ ("stepi"). Just stop. */
+ /* Also, maybe we just did a "nexti" inside a prolog,
+ so we thought it was a subroutine call but it was not.
+ Stop as well. FENN */
+ stop_step = 1;
+ print_stop_reason (END_STEPPING_RANGE, 0);
+ stop_stepping (ecs);
+ return;
+ }
+
+ if (step_over_calls == STEP_OVER_ALL || IGNORE_HELPER_CALL (stop_pc))
+ {
+ /* We're doing a "next". */
+
+ if (legacy_frame_p (current_gdbarch)
+ && pc_in_sigtramp (stop_pc)
+ && frame_id_inner (step_frame_id,
+ frame_id_build (read_sp (), 0)))
+ /* NOTE: cagney/2004-03-15: This is only needed for legacy
+ systems. On non-legacy systems step_over_function doesn't
+ use STEP_FRAME_ID and hence the below update "hack" isn't
+ needed. */
+ /* We stepped out of a signal handler, and into its calling
+ trampoline. This is misdetected as a subroutine call, but
+ stepping over the signal trampoline isn't such a bad idea.
+ In order to do that, we have to ignore the value in
+ step_frame_id, since that doesn't represent the frame
+ that'll reach when we return from the signal trampoline.
+ Otherwise we'll probably continue to the end of the
+ program. */
+ step_frame_id = null_frame_id;
+
+ step_over_function (ecs);
+ keep_going (ecs);
+ return;
+ }
+
+ /* If we are in a function call trampoline (a stub between
+ the calling routine and the real function), locate the real
+ function. That's what tells us (a) whether we want to step
+ into it at all, and (b) what prologue we want to run to
+ the end of, if we do step into it. */
+ real_stop_pc = skip_language_trampoline (stop_pc);
+ if (real_stop_pc == 0)
+ real_stop_pc = SKIP_TRAMPOLINE_CODE (stop_pc);
+ if (real_stop_pc != 0)
+ ecs->stop_func_start = real_stop_pc;
+
+ /* If we have line number information for the function we
+ are thinking of stepping into, step into it.
+
+ If there are several symtabs at that PC (e.g. with include
+ files), just want to know whether *any* of them have line
+ numbers. find_pc_line handles this. */
+ {
+ struct symtab_and_line tmp_sal;
+
+ tmp_sal = find_pc_line (ecs->stop_func_start, 0);
+ if (tmp_sal.line != 0)
+ {
+ step_into_function (ecs);
+ return;
+ }
+ }
+
+ /* If we have no line number and the step-stop-if-no-debug
+ is set, we stop the step so that the user has a chance to
+ switch in assembly mode. */
+ if (step_over_calls == STEP_OVER_UNDEBUGGABLE && step_stop_if_no_debug)
+ {
+ stop_step = 1;
+ print_stop_reason (END_STEPPING_RANGE, 0);
+ stop_stepping (ecs);
+ return;
+ }
+
+ step_over_function (ecs);
+ keep_going (ecs);
+ return;
+}
+
+static void
+adjust_pc_after_break (struct execution_control_state *ecs)
+{
+ CORE_ADDR stop_pc;
+
+ /* If this target does not decrement the PC after breakpoints, then
+ we have nothing to do. */
+ if (DECR_PC_AFTER_BREAK == 0)
+ return;
+
+ /* If we've hit a breakpoint, we'll normally be stopped with SIGTRAP. If
+ we aren't, just return.
+
+ We assume that waitkinds other than TARGET_WAITKIND_STOPPED are not
+ affected by DECR_PC_AFTER_BREAK. Other waitkinds which are implemented
+ by software breakpoints should be handled through the normal breakpoint
+ layer.
+
+ NOTE drow/2004-01-31: On some targets, breakpoints may generate
+ different signals (SIGILL or SIGEMT for instance), but it is less
+ clear where the PC is pointing afterwards. It may not match
+ DECR_PC_AFTER_BREAK. I don't know any specific target that generates
+ these signals at breakpoints (the code has been in GDB since at least
+ 1992) so I can not guess how to handle them here.
+
+ In earlier versions of GDB, a target with HAVE_NONSTEPPABLE_WATCHPOINTS
+ would have the PC after hitting a watchpoint affected by
+ DECR_PC_AFTER_BREAK. I haven't found any target with both of these set
+ in GDB history, and it seems unlikely to be correct, so
+ HAVE_NONSTEPPABLE_WATCHPOINTS is not checked here. */
+
+ if (ecs->ws.kind != TARGET_WAITKIND_STOPPED)
+ return;
+
+ if (ecs->ws.value.sig != TARGET_SIGNAL_TRAP)
+ return;
+
+ /* Find the location where (if we've hit a breakpoint) the breakpoint would
+ be. */
+ stop_pc = read_pc_pid (ecs->ptid) - DECR_PC_AFTER_BREAK;
+
+ /* If we're software-single-stepping, then assume this is a breakpoint.
+ NOTE drow/2004-01-17: This doesn't check that the PC matches, or that
+ we're even in the right thread. The software-single-step code needs
+ some modernization.
+
+ If we're not software-single-stepping, then we first check that there
+ is an enabled software breakpoint at this address. If there is, and
+ we weren't using hardware-single-step, then we've hit the breakpoint.
+
+ If we were using hardware-single-step, we check prev_pc; if we just
+ stepped over an inserted software breakpoint, then we should decrement
+ the PC and eventually report hitting the breakpoint. The prev_pc check
+ prevents us from decrementing the PC if we just stepped over a jump
+ instruction and landed on the instruction after a breakpoint.
+
+ The last bit checks that we didn't hit a breakpoint in a signal handler
+ without an intervening stop in sigtramp, which is detected by a new
+ stack pointer value below any usual function calling stack adjustments.
+
+ NOTE drow/2004-01-17: I'm not sure that this is necessary. The check
+ predates checking for software single step at the same time. Also,
+ if we've moved into a signal handler we should have seen the
+ signal. */
+
+ if ((SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
+ || (software_breakpoint_inserted_here_p (stop_pc)
+ && !(currently_stepping (ecs)
+ && prev_pc != stop_pc
+ && !(step_range_end && INNER_THAN (read_sp (), (step_sp - 16))))))
+ write_pc_pid (stop_pc, ecs->ptid);
+}
/* Given an execution control state that has been freshly filled in
by an event from the inferior, figure out what it means and take
void
handle_inferior_event (struct execution_control_state *ecs)
{
- CORE_ADDR tmp;
+ /* NOTE: cagney/2003-03-28: If you're looking at this code and
+ thinking that the variable stepped_after_stopped_by_watchpoint
+ isn't used, then you're wrong! The macro STOPPED_BY_WATCHPOINT,
+ defined in the file "config/pa/nm-hppah.h", accesses the variable
+ indirectly. Mutter something rude about the HP merge. */
int stepped_after_stopped_by_watchpoint;
int sw_single_step_trap_p = 0;
target_last_wait_ptid = ecs->ptid;
target_last_waitstatus = *ecs->wp;
+ adjust_pc_after_break (ecs);
+
switch (ecs->infwait_state)
{
case infwait_thread_hop_state:
/* Cancel the waiton_ptid. */
ecs->waiton_ptid = pid_to_ptid (-1);
- /* Fall thru to the normal_state case. */
+ /* See comments where a TARGET_WAITKIND_SYSCALL_RETURN event
+ is serviced in this loop, below. */
+ if (ecs->enable_hw_watchpoints_after_wait)
+ {
+ TARGET_ENABLE_HW_WATCHPOINTS (PIDGET (inferior_ptid));
+ ecs->enable_hw_watchpoints_after_wait = 0;
+ }
+ stepped_after_stopped_by_watchpoint = 0;
+ break;
case infwait_normal_state:
/* See comments where a TARGET_WAITKIND_SYSCALL_RETURN event
break;
case infwait_nullified_state:
+ stepped_after_stopped_by_watchpoint = 0;
break;
case infwait_nonstep_watch_state:
in combination correctly? */
stepped_after_stopped_by_watchpoint = 1;
break;
+
+ default:
+ internal_error (__FILE__, __LINE__, "bad switch");
}
ecs->infwait_state = infwait_normal_state;
might be the shell which has just loaded some objects,
otherwise add the symbols for the newly loaded objects. */
#ifdef SOLIB_ADD
- if (!stop_soon_quietly)
+ if (stop_soon == NO_STOP_QUIETLY)
{
/* Remove breakpoints, SOLIB_ADD might adjust
breakpoint addresses via breakpoint_re_set. */
terminal for any messages produced by
breakpoint_re_set. */
target_terminal_ours_for_output ();
- SOLIB_ADD (NULL, 0, NULL, auto_solib_add);
+ /* NOTE: cagney/2003-11-25: Make certain that the target
+ stack's section table is kept up-to-date. Architectures,
+ (e.g., PPC64), use the section table to perform
+ operations such as address => section name and hence
+ require the table to contain all sections (including
+ those found in shared libraries). */
+ /* NOTE: cagney/2003-11-25: Pass current_target and not
+ exec_ops to SOLIB_ADD. This is because current GDB is
+ only tooled to propagate section_table changes out from
+ the "current_target" (see target_resize_to_sections), and
+ not up from the exec stratum. This, of course, isn't
+ right. "infrun.c" should only interact with the
+ exec/process stratum, instead relying on the target stack
+ to propagate relevant changes (stop, section table
+ changed, ...) up to other layers. */
+ SOLIB_ADD (NULL, 0, ¤t_target, auto_solib_add);
target_terminal_inferior ();
/* Reinsert breakpoints and continue. */
/* The following are the only cases in which we keep going;
the above cases end in a continue or goto. */
case TARGET_WAITKIND_FORKED:
+ case TARGET_WAITKIND_VFORKED:
stop_signal = TARGET_SIGNAL_TRAP;
pending_follow.kind = ecs->ws.kind;
- /* Ignore fork events reported for the parent; we're only
- interested in reacting to forks of the child. Note that
- we expect the child's fork event to be available if we
- waited for it now. */
- if (ptid_equal (inferior_ptid, ecs->ptid))
- {
- pending_follow.fork_event.saw_parent_fork = 1;
- pending_follow.fork_event.parent_pid = PIDGET (ecs->ptid);
- pending_follow.fork_event.child_pid = ecs->ws.value.related_pid;
- prepare_to_wait (ecs);
- return;
- }
- else
- {
- pending_follow.fork_event.saw_child_fork = 1;
- pending_follow.fork_event.child_pid = PIDGET (ecs->ptid);
- pending_follow.fork_event.parent_pid = ecs->ws.value.related_pid;
- }
+ pending_follow.fork_event.parent_pid = PIDGET (ecs->ptid);
+ pending_follow.fork_event.child_pid = ecs->ws.value.related_pid;
- stop_pc = read_pc_pid (ecs->ptid);
- ecs->saved_inferior_ptid = inferior_ptid;
- inferior_ptid = ecs->ptid;
- /* The second argument of bpstat_stop_status is meant to help
- distinguish between a breakpoint trap and a singlestep trap.
- This is only important on targets where DECR_PC_AFTER_BREAK
- is non-zero. The prev_pc test is meant to distinguish between
- singlestepping a trap instruction, and singlestepping thru a
- jump to the instruction following a trap instruction. */
-
- stop_bpstat = bpstat_stop_status (&stop_pc,
- currently_stepping (ecs) &&
- prev_pc !=
- stop_pc - DECR_PC_AFTER_BREAK);
- ecs->random_signal = !bpstat_explains_signal (stop_bpstat);
- inferior_ptid = ecs->saved_inferior_ptid;
- goto process_event_stop_test;
+ stop_pc = read_pc ();
- /* If this a platform which doesn't allow a debugger to touch a
- vfork'd inferior until after it exec's, then we'd best keep
- our fingers entirely off the inferior, other than continuing
- it. This has the unfortunate side-effect that catchpoints
- of vforks will be ignored. But since the platform doesn't
- allow the inferior be touched at vfork time, there's really
- little choice. */
- case TARGET_WAITKIND_VFORKED:
- stop_signal = TARGET_SIGNAL_TRAP;
- pending_follow.kind = ecs->ws.kind;
+ stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid);
- /* Is this a vfork of the parent? If so, then give any
- vfork catchpoints a chance to trigger now. (It's
- dangerous to do so if the child canot be touched until
- it execs, and the child has not yet exec'd. We probably
- should warn the user to that effect when the catchpoint
- triggers...) */
- if (ptid_equal (ecs->ptid, inferior_ptid))
- {
- pending_follow.fork_event.saw_parent_fork = 1;
- pending_follow.fork_event.parent_pid = PIDGET (ecs->ptid);
- pending_follow.fork_event.child_pid = ecs->ws.value.related_pid;
- }
+ ecs->random_signal = !bpstat_explains_signal (stop_bpstat);
- /* If we've seen the child's vfork event but cannot really touch
- the child until it execs, then we must continue the child now.
- Else, give any vfork catchpoints a chance to trigger now. */
- else
+ /* If no catchpoint triggered for this, then keep going. */
+ if (ecs->random_signal)
{
- pending_follow.fork_event.saw_child_fork = 1;
- pending_follow.fork_event.child_pid = PIDGET (ecs->ptid);
- pending_follow.fork_event.parent_pid = ecs->ws.value.related_pid;
- target_post_startup_inferior (pid_to_ptid
- (pending_follow.fork_event.
- child_pid));
- follow_vfork_when_exec = !target_can_follow_vfork_prior_to_exec ();
- if (follow_vfork_when_exec)
- {
- target_resume (ecs->ptid, 0, TARGET_SIGNAL_0);
- prepare_to_wait (ecs);
- return;
- }
+ stop_signal = TARGET_SIGNAL_0;
+ keep_going (ecs);
+ return;
}
-
- stop_pc = read_pc ();
- /* The second argument of bpstat_stop_status is meant to help
- distinguish between a breakpoint trap and a singlestep trap.
- This is only important on targets where DECR_PC_AFTER_BREAK
- is non-zero. The prev_pc test is meant to distinguish between
- singlestepping a trap instruction, and singlestepping thru a
- jump to the instruction following a trap instruction. */
-
- stop_bpstat = bpstat_stop_status (&stop_pc,
- currently_stepping (ecs) &&
- prev_pc !=
- stop_pc - DECR_PC_AFTER_BREAK);
- ecs->random_signal = !bpstat_explains_signal (stop_bpstat);
goto process_event_stop_test;
case TARGET_WAITKIND_EXECD:
stop_signal = TARGET_SIGNAL_TRAP;
+ /* NOTE drow/2002-12-05: This code should be pushed down into the
+ target_wait function. Until then following vfork on HP/UX 10.20
+ is probably broken by this. Of course, it's broken anyway. */
/* Is this a target which reports multiple exec events per actual
call to exec()? (HP-UX using ptrace does, for example.) If so,
ignore all but the last one. Just resume the exec'r, and wait
savestring (ecs->ws.value.execd_pathname,
strlen (ecs->ws.value.execd_pathname));
- /* Did inferior_ptid exec, or did a (possibly not-yet-followed)
- child of a vfork exec?
-
- ??rehrauer: This is unabashedly an HP-UX specific thing. On
- HP-UX, events associated with a vforking inferior come in
- threes: a vfork event for the child (always first), followed
- a vfork event for the parent and an exec event for the child.
- The latter two can come in either order.
-
- If we get the parent vfork event first, life's good: We follow
- either the parent or child, and then the child's exec event is
- a "don't care".
-
- But if we get the child's exec event first, then we delay
- responding to it until we handle the parent's vfork. Because,
- otherwise we can't satisfy a "catch vfork". */
- if (pending_follow.kind == TARGET_WAITKIND_VFORKED)
- {
- pending_follow.fork_event.saw_child_exec = 1;
-
- /* On some targets, the child must be resumed before
- the parent vfork event is delivered. A single-step
- suffices. */
- if (RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK ())
- target_resume (ecs->ptid, 1, TARGET_SIGNAL_0);
- /* We expect the parent vfork event to be available now. */
- prepare_to_wait (ecs);
- return;
- }
-
/* This causes the eventpoints and symbol table to be reset. Must
do this now, before trying to determine whether to stop. */
follow_exec (PIDGET (inferior_ptid), pending_follow.execd_pathname);
stop_pc = read_pc_pid (ecs->ptid);
ecs->saved_inferior_ptid = inferior_ptid;
inferior_ptid = ecs->ptid;
- /* The second argument of bpstat_stop_status is meant to help
- distinguish between a breakpoint trap and a singlestep trap.
- This is only important on targets where DECR_PC_AFTER_BREAK
- is non-zero. The prev_pc test is meant to distinguish between
- singlestepping a trap instruction, and singlestepping thru a
- jump to the instruction following a trap instruction. */
-
- stop_bpstat = bpstat_stop_status (&stop_pc,
- currently_stepping (ecs) &&
- prev_pc !=
- stop_pc - DECR_PC_AFTER_BREAK);
+
+ stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid);
+
ecs->random_signal = !bpstat_explains_signal (stop_bpstat);
inferior_ptid = ecs->saved_inferior_ptid;
+
+ /* If no catchpoint triggered for this, then keep going. */
+ if (ecs->random_signal)
+ {
+ stop_signal = TARGET_SIGNAL_0;
+ keep_going (ecs);
+ return;
+ }
goto process_event_stop_test;
/* These syscall events are returned on HP-UX, as part of its
/* We had an event in the inferior, but we are not interested
in handling it at this level. The lower layers have already
- done what needs to be done, if anything. This case can
- occur only when the target is async or extended-async. One
- of the circumstamces for this to happen is when the
- inferior produces output for the console. The inferior has
- not stopped, and we are ignoring the event. */
+ done what needs to be done, if anything.
+
+ One of the possible circumstances for this is when the
+ inferior produces output for the console. The inferior has
+ not stopped, and we are ignoring the event. Another possible
+ circumstance is any event which the lower level knows will be
+ reported multiple times without an intervening resume. */
case TARGET_WAITKIND_IGNORE:
- ecs->wait_some_more = 1;
+ prepare_to_wait (ecs);
return;
}
stop_pc = read_pc_pid (ecs->ptid);
+ if (stepping_past_singlestep_breakpoint)
+ {
+ gdb_assert (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p);
+ gdb_assert (ptid_equal (singlestep_ptid, ecs->ptid));
+ gdb_assert (!ptid_equal (singlestep_ptid, saved_singlestep_ptid));
+
+ stepping_past_singlestep_breakpoint = 0;
+
+ /* We've either finished single-stepping past the single-step
+ breakpoint, or stopped for some other reason. It would be nice if
+ we could tell, but we can't reliably. */
+ if (stop_signal == TARGET_SIGNAL_TRAP)
+ {
+ /* Pull the single step breakpoints out of the target. */
+ SOFTWARE_SINGLE_STEP (0, 0);
+ singlestep_breakpoints_inserted_p = 0;
+
+ ecs->random_signal = 0;
+
+ ecs->ptid = saved_singlestep_ptid;
+ context_switch (ecs);
+ if (context_hook)
+ context_hook (pid_to_thread_id (ecs->ptid));
+
+ resume (1, TARGET_SIGNAL_0);
+ prepare_to_wait (ecs);
+ return;
+ }
+ }
+
+ stepping_past_singlestep_breakpoint = 0;
+
/* See if a thread hit a thread-specific breakpoint that was meant for
another thread. If so, then step that thread past the breakpoint,
and continue it. */
if (stop_signal == TARGET_SIGNAL_TRAP)
{
+ int thread_hop_needed = 0;
+
/* Check if a regular breakpoint has been hit before checking
for a potential single step breakpoint. Otherwise, GDB will
not see this breakpoint hit when stepping onto breakpoints. */
- if (breakpoints_inserted
- && breakpoint_here_p (stop_pc - DECR_PC_AFTER_BREAK))
+ if (breakpoints_inserted && breakpoint_here_p (stop_pc))
+ {
+ ecs->random_signal = 0;
+ if (!breakpoint_thread_match (stop_pc, ecs->ptid))
+ thread_hop_needed = 1;
+ }
+ else if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
{
ecs->random_signal = 0;
- if (!breakpoint_thread_match (stop_pc - DECR_PC_AFTER_BREAK,
- ecs->ptid))
+ /* The call to in_thread_list is necessary because PTIDs sometimes
+ change when we go from single-threaded to multi-threaded. If
+ the singlestep_ptid is still in the list, assume that it is
+ really different from ecs->ptid. */
+ if (!ptid_equal (singlestep_ptid, ecs->ptid)
+ && in_thread_list (singlestep_ptid))
+ {
+ thread_hop_needed = 1;
+ stepping_past_singlestep_breakpoint = 1;
+ saved_singlestep_ptid = singlestep_ptid;
+ }
+ }
+
+ if (thread_hop_needed)
{
int remove_status;
/* Saw a breakpoint, but it was hit by the wrong thread.
Just continue. */
- if (DECR_PC_AFTER_BREAK)
- write_pc_pid (stop_pc - DECR_PC_AFTER_BREAK, ecs->ptid);
+
+ if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
+ {
+ /* Pull the single step breakpoints out of the target. */
+ SOFTWARE_SINGLE_STEP (0, 0);
+ singlestep_breakpoints_inserted_p = 0;
+ }
remove_status = remove_breakpoints ();
/* Did we fail to remove breakpoints? If so, try
if (remove_status != 0)
{
/* FIXME! This is obviously non-portable! */
- write_pc_pid (stop_pc - DECR_PC_AFTER_BREAK + 4, ecs->ptid);
+ write_pc_pid (stop_pc + 4, ecs->ptid);
/* We need to restart all the threads now,
* unles we're running in scheduler-locked mode.
* Use currently_stepping to determine whether to
registers_changed ();
return;
}
- }
}
else if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
{
- /* Readjust the stop_pc as it is off by DECR_PC_AFTER_BREAK
- compared to the value it would have if the system stepping
- capability was used. This allows the rest of the code in
- this function to use this address without having to worry
- whether software single step is in use or not. */
- if (DECR_PC_AFTER_BREAK)
- {
- stop_pc -= DECR_PC_AFTER_BREAK;
- write_pc_pid (stop_pc, ecs->ptid);
- }
-
sw_single_step_trap_p = 1;
ecs->random_signal = 0;
}
ecs->random_signal = 1;
/* See if something interesting happened to the non-current thread. If
- so, then switch to that thread, and eventually give control back to
- the user.
-
- Note that if there's any kind of pending follow (i.e., of a fork,
- vfork or exec), we don't want to do this now. Rather, we'll let
- the next resume handle it. */
- if (!ptid_equal (ecs->ptid, inferior_ptid) &&
- (pending_follow.kind == TARGET_WAITKIND_SPURIOUS))
+ so, then switch to that thread. */
+ if (!ptid_equal (ecs->ptid, inferior_ptid))
{
- int printed = 0;
-
- /* If it's a random signal for a non-current thread, notify user
- if he's expressed an interest. */
- if (ecs->random_signal && signal_print[stop_signal])
- {
-/* ??rehrauer: I don't understand the rationale for this code. If the
- inferior will stop as a result of this signal, then the act of handling
- the stop ought to print a message that's couches the stoppage in user
- terms, e.g., "Stopped for breakpoint/watchpoint". If the inferior
- won't stop as a result of the signal -- i.e., if the signal is merely
- a side-effect of something GDB's doing "under the covers" for the
- user, such as stepping threads over a breakpoint they shouldn't stop
- for -- then the message seems to be a serious annoyance at best.
-
- For now, remove the message altogether. */
-#if 0
- printed = 1;
- target_terminal_ours_for_output ();
- printf_filtered ("\nProgram received signal %s, %s.\n",
- target_signal_to_name (stop_signal),
- target_signal_to_string (stop_signal));
- gdb_flush (gdb_stdout);
-#endif
- }
-
- /* If it's not SIGTRAP and not a signal we want to stop for, then
- continue the thread. */
-
- if (stop_signal != TARGET_SIGNAL_TRAP && !signal_stop[stop_signal])
- {
- if (printed)
- target_terminal_inferior ();
-
- /* Clear the signal if it should not be passed. */
- if (signal_program[stop_signal] == 0)
- stop_signal = TARGET_SIGNAL_0;
-
- target_resume (ecs->ptid, 0, stop_signal);
- prepare_to_wait (ecs);
- return;
- }
-
- /* It's a SIGTRAP or a signal we're interested in. Switch threads,
- and fall into the rest of wait_for_inferior(). */
-
context_switch (ecs);
if (context_hook)
includes evaluating watchpoints, things will come to a
stop in the correct manner. */
- if (DECR_PC_AFTER_BREAK)
- write_pc (stop_pc - DECR_PC_AFTER_BREAK);
-
remove_breakpoints ();
registers_changed ();
target_resume (ecs->ptid, 1, TARGET_SIGNAL_0); /* Single step */
will be made according to the signal handling tables. */
/* First, distinguish signals caused by the debugger from signals
- that have to do with the program's own actions.
- Note that breakpoint insns may cause SIGTRAP or SIGILL
- or SIGEMT, depending on the operating system version.
- Here we detect when a SIGILL or SIGEMT is really a breakpoint
- and change it to SIGTRAP. */
+ that have to do with the program's own actions. Note that
+ breakpoint insns may cause SIGTRAP or SIGILL or SIGEMT, depending
+ on the operating system version. Here we detect when a SIGILL or
+ SIGEMT is really a breakpoint and change it to SIGTRAP. We do
+ something similar for SIGSEGV, since a SIGSEGV will be generated
+ when we're trying to execute a breakpoint instruction on a
+ non-executable stack. This happens for call dummy breakpoints
+ for architectures like SPARC that place call dummies on the
+ stack. */
if (stop_signal == TARGET_SIGNAL_TRAP
|| (breakpoints_inserted &&
(stop_signal == TARGET_SIGNAL_ILL
- || stop_signal == TARGET_SIGNAL_EMT)) || stop_soon_quietly)
+ || stop_signal == TARGET_SIGNAL_SEGV
+ || stop_signal == TARGET_SIGNAL_EMT))
+ || stop_soon == STOP_QUIETLY
+ || stop_soon == STOP_QUIETLY_NO_SIGSTOP)
{
if (stop_signal == TARGET_SIGNAL_TRAP && stop_after_trap)
{
stop_stepping (ecs);
return;
}
- if (stop_soon_quietly)
+
+ /* This is originated from start_remote(), start_inferior() and
+ shared libraries hook functions. */
+ if (stop_soon == STOP_QUIETLY)
{
stop_stepping (ecs);
return;
}
+ /* This originates from attach_command(). We need to overwrite
+ the stop_signal here, because some kernels don't ignore a
+ SIGSTOP in a subsequent ptrace(PTRACE_SONT,SOGSTOP) call.
+ See more comments in inferior.h. */
+ if (stop_soon == STOP_QUIETLY_NO_SIGSTOP)
+ {
+ stop_stepping (ecs);
+ if (stop_signal == TARGET_SIGNAL_STOP)
+ stop_signal = TARGET_SIGNAL_0;
+ return;
+ }
+
/* Don't even think about breakpoints
if just proceeded over a breakpoint.
else
{
/* See if there is a breakpoint at the current PC. */
+ stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid);
- /* The second argument of bpstat_stop_status is meant to help
- distinguish between a breakpoint trap and a singlestep trap.
- This is only important on targets where DECR_PC_AFTER_BREAK
- is non-zero. The prev_pc test is meant to distinguish between
- singlestepping a trap instruction, and singlestepping thru a
- jump to the instruction following a trap instruction.
-
- Therefore, pass TRUE if our reason for stopping is
- something other than hitting a breakpoint. We do this by
- checking that either: we detected earlier a software single
- step trap or, 1) stepping is going on and 2) we didn't hit
- a breakpoint in a signal handler without an intervening stop
- in sigtramp, which is detected by a new stack pointer value
- below any usual function calling stack adjustments. */
- stop_bpstat =
- bpstat_stop_status
- (&stop_pc,
- sw_single_step_trap_p
- || (currently_stepping (ecs)
- && prev_pc != stop_pc - DECR_PC_AFTER_BREAK
- && !(step_range_end
- && INNER_THAN (read_sp (), (step_sp - 16)))));
/* Following in case break condition called a
function. */
stop_print_frame = 1;
}
+ /* NOTE: cagney/2003-03-29: These two checks for a random signal
+ at one stage in the past included checks for an inferior
+ function call's call dummy's return breakpoint. The original
+ comment, that went with the test, read:
+
+ ``End of a stack dummy. Some systems (e.g. Sony news) give
+ another signal besides SIGTRAP, so check here as well as
+ above.''
+
+ If someone ever tries to get get call dummys on a
+ non-executable stack to work (where the target would stop
+ with something like a SIGSEGV), then those tests might need
+ to be re-instated. Given, however, that the tests were only
+ enabled when momentary breakpoints were not being used, I
+ suspect that it won't be the case.
+
+ NOTE: kettenis/2004-02-05: Indeed such checks don't seem to
+ be necessary for call dummies on a non-executable stack on
+ SPARC. */
+
if (stop_signal == TARGET_SIGNAL_TRAP)
ecs->random_signal
= !(bpstat_explains_signal (stop_bpstat)
|| trap_expected
- || (!CALL_DUMMY_BREAKPOINT_OFFSET_P
- && PC_IN_CALL_DUMMY (stop_pc, read_sp (),
- FRAME_FP (get_current_frame ())))
|| (step_range_end && step_resume_breakpoint == NULL));
-
else
{
- ecs->random_signal = !(bpstat_explains_signal (stop_bpstat)
- /* End of a stack dummy. Some systems (e.g. Sony
- news) give another signal besides SIGTRAP, so
- check here as well as above. */
- || (!CALL_DUMMY_BREAKPOINT_OFFSET_P
- && PC_IN_CALL_DUMMY (stop_pc, read_sp (),
- FRAME_FP
- (get_current_frame
- ()))));
+ ecs->random_signal = !bpstat_explains_signal (stop_bpstat);
if (!ecs->random_signal)
stop_signal = TARGET_SIGNAL_TRAP;
}
else
ecs->random_signal = 1;
- /* If a fork, vfork or exec event was seen, then there are two
- possible responses we can make:
-
- 1. If a catchpoint triggers for the event (ecs->random_signal == 0),
- then we must stop now and issue a prompt. We will resume
- the inferior when the user tells us to.
- 2. If no catchpoint triggers for the event (ecs->random_signal == 1),
- then we must resume the inferior now and keep checking.
-
- In either case, we must take appropriate steps to "follow" the
- the fork/vfork/exec when the inferior is resumed. For example,
- if follow-fork-mode is "child", then we must detach from the
- parent inferior and follow the new child inferior.
-
- In either case, setting pending_follow causes the next resume()
- to take the appropriate following action. */
-process_event_stop_test:
- if (ecs->ws.kind == TARGET_WAITKIND_FORKED)
- {
- if (ecs->random_signal) /* I.e., no catchpoint triggered for this. */
- {
- trap_expected = 1;
- stop_signal = TARGET_SIGNAL_0;
- keep_going (ecs);
- return;
- }
- }
- else if (ecs->ws.kind == TARGET_WAITKIND_VFORKED)
- {
- if (ecs->random_signal) /* I.e., no catchpoint triggered for this. */
- {
- stop_signal = TARGET_SIGNAL_0;
- keep_going (ecs);
- return;
- }
- }
- else if (ecs->ws.kind == TARGET_WAITKIND_EXECD)
- {
- pending_follow.kind = ecs->ws.kind;
- if (ecs->random_signal) /* I.e., no catchpoint triggered for this. */
- {
- trap_expected = 1;
- stop_signal = TARGET_SIGNAL_0;
- keep_going (ecs);
- return;
- }
- }
+process_event_stop_test:
/* For the program's own signals, act according to
the signal handling tables. */
set_longjmp_resume_breakpoint (jmp_buf_pc, get_current_frame ());
else
#endif /* 0 */
- set_longjmp_resume_breakpoint (jmp_buf_pc, NULL);
+ set_longjmp_resume_breakpoint (jmp_buf_pc, null_frame_id);
ecs->handling_longjmp = 1; /* FIXME */
keep_going (ecs);
return;
#if 0
/* FIXME - Need to implement nested temporary breakpoints */
if (step_over_calls
- && (INNER_THAN (FRAME_FP (get_current_frame ()),
- step_frame_address)))
+ && (frame_id_inner (get_frame_id (get_current_frame ()),
+ step_frame_id)))
{
ecs->another_trap = 1;
keep_going (ecs);
terminal for any messages produced by
breakpoint_re_set. */
target_terminal_ours_for_output ();
- SOLIB_ADD (NULL, 0, NULL, auto_solib_add);
+ /* NOTE: cagney/2003-11-25: Make certain that the target
+ stack's section table is kept up-to-date. Architectures,
+ (e.g., PPC64), use the section table to perform
+ operations such as address => section name and hence
+ require the table to contain all sections (including
+ those found in shared libraries). */
+ /* NOTE: cagney/2003-11-25: Pass current_target and not
+ exec_ops to SOLIB_ADD. This is because current GDB is
+ only tooled to propagate section_table changes out from
+ the "current_target" (see target_resize_to_sections), and
+ not up from the exec stratum. This, of course, isn't
+ right. "infrun.c" should only interact with the
+ exec/process stratum, instead relying on the target stack
+ to propagate relevant changes (stop, section table
+ changed, ...) up to other layers. */
+ SOLIB_ADD (NULL, 0, ¤t_target, auto_solib_add);
target_terminal_inferior ();
/* Try to reenable shared library breakpoints, additional
gdb of events. This allows the user to get control
and place breakpoints in initializer routines for
dynamically loaded objects (among other things). */
- if (stop_on_solib_events)
+ if (stop_on_solib_events || stop_stack_dummy)
{
stop_stepping (ecs);
return;
return;
}
- if (!CALL_DUMMY_BREAKPOINT_OFFSET_P)
- {
- /* This is the old way of detecting the end of the stack dummy.
- An architecture which defines CALL_DUMMY_BREAKPOINT_OFFSET gets
- handled above. As soon as we can test it on all of them, all
- architectures should define it. */
-
- /* If this is the breakpoint at the end of a stack dummy,
- just stop silently, unless the user was doing an si/ni, in which
- case she'd better know what she's doing. */
-
- if (CALL_DUMMY_HAS_COMPLETED (stop_pc, read_sp (),
- FRAME_FP (get_current_frame ()))
- && !step_range_end)
- {
- stop_print_frame = 0;
- stop_stack_dummy = 1;
-#ifdef HP_OS_BUG
- trap_expected_after_continue = 1;
-#endif
- stop_stepping (ecs);
- return;
- }
- }
-
if (step_resume_breakpoint)
{
/* Having a step-resume breakpoint overrides anything
if (step_over_calls == STEP_OVER_UNDEBUGGABLE
&& IN_SOLIB_DYNSYM_RESOLVE_CODE (stop_pc))
{
- CORE_ADDR pc_after_resolver = SKIP_SOLIB_RESOLVER (stop_pc);
+ CORE_ADDR pc_after_resolver =
+ gdbarch_skip_solib_resolver (current_gdbarch, stop_pc);
if (pc_after_resolver)
{
/* Set up a step-resume breakpoint at the address
indicated by SKIP_SOLIB_RESOLVER. */
struct symtab_and_line sr_sal;
- INIT_SAL (&sr_sal);
+ init_sal (&sr_sal);
sr_sal.pc = pc_after_resolver;
check_for_old_step_resume_breakpoint ();
step_resume_breakpoint =
- set_momentary_breakpoint (sr_sal, NULL, bp_step_resume);
+ set_momentary_breakpoint (sr_sal, null_frame_id, bp_step_resume);
if (breakpoints_inserted)
insert_breakpoints ();
}
But we can update it every time we leave the step range. */
ecs->update_step_sp = 1;
- /* Did we just take a signal? */
- if (PC_IN_SIGTRAMP (stop_pc, ecs->stop_func_name)
- && !PC_IN_SIGTRAMP (prev_pc, prev_func_name)
- && INNER_THAN (read_sp (), step_sp))
+ /* Did we just step into a singal trampoline (either by stepping out
+ of a handler, or by taking a signal)? */
+ /* NOTE: cagney/2004-03-16: Replaced (except for legacy) a check for
+ "pc_in_sigtramp(stop_pc) != pc_in_sigtramp(step_pc)" with
+ frame_type == SIGTRAMP && !frame_id_eq. The latter is far more
+ robust as it will correctly handle nested signal trampolines. */
+ if (legacy_frame_p (current_gdbarch)
+ ? (pc_in_sigtramp (stop_pc)
+ && !pc_in_sigtramp (prev_pc)
+ && INNER_THAN (read_sp (), step_sp))
+ : (get_frame_type (get_current_frame ()) == SIGTRAMP_FRAME
+ && !frame_id_eq (get_frame_id (get_current_frame ()), step_frame_id)))
{
- /* We've just taken a signal; go until we are back to
- the point where we took it and one more. */
-
- /* Note: The test above succeeds not only when we stepped
- into a signal handler, but also when we step past the last
- statement of a signal handler and end up in the return stub
- of the signal handler trampoline. To distinguish between
- these two cases, check that the frame is INNER_THAN the
- previous one below. pai/1997-09-11 */
-
-
{
- CORE_ADDR current_frame = FRAME_FP (get_current_frame ());
+ struct frame_id current_frame = get_frame_id (get_current_frame ());
- if (INNER_THAN (current_frame, step_frame_address))
+ if (frame_id_inner (current_frame, step_frame_id))
{
/* We have just taken a signal; go until we are back to
the point where we took it and one more. */
breakpoint even though the signal happened. */
struct symtab_and_line sr_sal;
- INIT_SAL (&sr_sal);
+ init_sal (&sr_sal);
sr_sal.symtab = NULL;
sr_sal.line = 0;
sr_sal.pc = prev_pc;
/* We could probably be setting the frame to
- step_frame_address; I don't think anyone thought to
- try it. */
+ step_frame_id; I don't think anyone thought to try it. */
check_for_old_step_resume_breakpoint ();
step_resume_breakpoint =
- set_momentary_breakpoint (sr_sal, NULL, bp_step_resume);
+ set_momentary_breakpoint (sr_sal, null_frame_id, bp_step_resume);
if (breakpoints_inserted)
insert_breakpoints ();
}
return;
}
- if (stop_pc == ecs->stop_func_start /* Quick test */
- || (in_prologue (stop_pc, ecs->stop_func_start) &&
- !IN_SOLIB_RETURN_TRAMPOLINE (stop_pc, ecs->stop_func_name))
+ if (((stop_pc == ecs->stop_func_start /* Quick test */
+ || in_prologue (stop_pc, ecs->stop_func_start))
+ && !IN_SOLIB_RETURN_TRAMPOLINE (stop_pc, ecs->stop_func_name))
|| IN_SOLIB_CALL_TRAMPOLINE (stop_pc, ecs->stop_func_name)
|| ecs->stop_func_name == 0)
{
/* It's a subroutine call. */
-
- if ((step_over_calls == STEP_OVER_NONE)
- || ((step_range_end == 1)
- && in_prologue (prev_pc, ecs->stop_func_start)))
- {
- /* I presume that step_over_calls is only 0 when we're
- supposed to be stepping at the assembly language level
- ("stepi"). Just stop. */
- /* Also, maybe we just did a "nexti" inside a prolog,
- so we thought it was a subroutine call but it was not.
- Stop as well. FENN */
- stop_step = 1;
- print_stop_reason (END_STEPPING_RANGE, 0);
- stop_stepping (ecs);
- return;
- }
-
- if (step_over_calls == STEP_OVER_ALL || IGNORE_HELPER_CALL (stop_pc))
- {
- /* We're doing a "next". */
-
- if (PC_IN_SIGTRAMP (stop_pc, ecs->stop_func_name)
- && INNER_THAN (step_frame_address, read_sp ()))
- /* We stepped out of a signal handler, and into its
- calling trampoline. This is misdetected as a
- subroutine call, but stepping over the signal
- trampoline isn't such a bad idea. In order to do
- that, we have to ignore the value in
- step_frame_address, since that doesn't represent the
- frame that'll reach when we return from the signal
- trampoline. Otherwise we'll probably continue to the
- end of the program. */
- step_frame_address = 0;
-
- step_over_function (ecs);
- keep_going (ecs);
- return;
- }
-
- /* If we are in a function call trampoline (a stub between
- the calling routine and the real function), locate the real
- function. That's what tells us (a) whether we want to step
- into it at all, and (b) what prologue we want to run to
- the end of, if we do step into it. */
- tmp = SKIP_TRAMPOLINE_CODE (stop_pc);
- if (tmp != 0)
- ecs->stop_func_start = tmp;
- else
- {
- tmp = DYNAMIC_TRAMPOLINE_NEXTPC (stop_pc);
- if (tmp)
- {
- struct symtab_and_line xxx;
- /* Why isn't this s_a_l called "sr_sal", like all of the
- other s_a_l's where this code is duplicated? */
- INIT_SAL (&xxx); /* initialize to zeroes */
- xxx.pc = tmp;
- xxx.section = find_pc_overlay (xxx.pc);
- check_for_old_step_resume_breakpoint ();
- step_resume_breakpoint =
- set_momentary_breakpoint (xxx, NULL, bp_step_resume);
- insert_breakpoints ();
- keep_going (ecs);
- return;
- }
- }
-
- /* If we have line number information for the function we
- are thinking of stepping into, step into it.
-
- If there are several symtabs at that PC (e.g. with include
- files), just want to know whether *any* of them have line
- numbers. find_pc_line handles this. */
- {
- struct symtab_and_line tmp_sal;
-
- tmp_sal = find_pc_line (ecs->stop_func_start, 0);
- if (tmp_sal.line != 0)
- {
- step_into_function (ecs);
- return;
- }
- }
-
- /* If we have no line number and the step-stop-if-no-debug
- is set, we stop the step so that the user has a chance to
- switch in assembly mode. */
- if (step_over_calls == STEP_OVER_UNDEBUGGABLE && step_stop_if_no_debug)
- {
- stop_step = 1;
- print_stop_reason (END_STEPPING_RANGE, 0);
- stop_stepping (ecs);
- return;
- }
-
- step_over_function (ecs);
- keep_going (ecs);
+ handle_step_into_function (ecs);
return;
-
}
/* We've wandered out of the step range. */
we want to proceed through the trampoline when stepping. */
if (IN_SOLIB_RETURN_TRAMPOLINE (stop_pc, ecs->stop_func_name))
{
- CORE_ADDR tmp;
-
/* Determine where this trampoline returns. */
- tmp = SKIP_TRAMPOLINE_CODE (stop_pc);
+ CORE_ADDR real_stop_pc = SKIP_TRAMPOLINE_CODE (stop_pc);
/* Only proceed through if we know where it's going. */
- if (tmp)
+ if (real_stop_pc)
{
/* And put the step-breakpoint there and go until there. */
struct symtab_and_line sr_sal;
- INIT_SAL (&sr_sal); /* initialize to zeroes */
- sr_sal.pc = tmp;
+ init_sal (&sr_sal); /* initialize to zeroes */
+ sr_sal.pc = real_stop_pc;
sr_sal.section = find_pc_overlay (sr_sal.pc);
/* Do not specify what the fp should be when we stop
since on some machines the prologue
is where the new fp value is established. */
check_for_old_step_resume_breakpoint ();
step_resume_breakpoint =
- set_momentary_breakpoint (sr_sal, NULL, bp_step_resume);
+ set_momentary_breakpoint (sr_sal, null_frame_id, bp_step_resume);
if (breakpoints_inserted)
insert_breakpoints ();
}
step_range_start = ecs->sal.pc;
step_range_end = ecs->sal.end;
- step_frame_address = FRAME_FP (get_current_frame ());
+ step_frame_id = get_frame_id (get_current_frame ());
ecs->current_line = ecs->sal.line;
ecs->current_symtab = ecs->sal.symtab;
- /* In the case where we just stepped out of a function into the middle
- of a line of the caller, continue stepping, but step_frame_address
- must be modified to current frame */
+ /* In the case where we just stepped out of a function into the
+ middle of a line of the caller, continue stepping, but
+ step_frame_id must be modified to current frame */
+#if 0
+ /* NOTE: cagney/2003-10-16: I think this frame ID inner test is too
+ generous. It will trigger on things like a step into a frameless
+ stackless leaf function. I think the logic should instead look
+ at the unwound frame ID has that should give a more robust
+ indication of what happened. */
+ if (step-ID == current-ID)
+ still stepping in same function;
+ else if (step-ID == unwind (current-ID))
+ stepped into a function;
+ else
+ stepped out of a function;
+ /* Of course this assumes that the frame ID unwind code is robust
+ and we're willing to introduce frame unwind logic into this
+ function. Fortunately, those days are nearly upon us. */
+#endif
{
- CORE_ADDR current_frame = FRAME_FP (get_current_frame ());
- if (!(INNER_THAN (current_frame, step_frame_address)))
- step_frame_address = current_frame;
+ struct frame_id current_frame = get_frame_id (get_current_frame ());
+ if (!(frame_id_inner (current_frame, step_frame_id)))
+ step_frame_id = current_frame;
}
keep_going (ecs);
check_sigtramp2 (struct execution_control_state *ecs)
{
if (trap_expected
- && PC_IN_SIGTRAMP (stop_pc, ecs->stop_func_name)
- && !PC_IN_SIGTRAMP (prev_pc, prev_func_name)
+ && pc_in_sigtramp (stop_pc)
+ && !pc_in_sigtramp (prev_pc)
&& INNER_THAN (read_sp (), step_sp))
{
/* What has happened here is that we have just stepped the
struct symtab_and_line sr_sal;
- INIT_SAL (&sr_sal); /* initialize to zeroes */
+ init_sal (&sr_sal); /* initialize to zeroes */
sr_sal.pc = prev_pc;
sr_sal.section = find_pc_overlay (sr_sal.pc);
/* We perhaps could set the frame if we kept track of what the
frame corresponding to prev_pc was. But we don't, so don't. */
through_sigtramp_breakpoint =
- set_momentary_breakpoint (sr_sal, NULL, bp_through_sigtramp);
+ set_momentary_breakpoint (sr_sal, null_frame_id, bp_through_sigtramp);
if (breakpoints_inserted)
insert_breakpoints ();
/* If the prologue ends in the middle of a source line, continue to
the end of that source line (if it is still within the function).
Otherwise, just go to end of prologue. */
-#ifdef PROLOGUE_FIRSTLINE_OVERLAP
- /* no, don't either. It skips any code that's legitimately on the
- first line. */
-#else
if (ecs->sal.end
&& ecs->sal.pc != ecs->stop_func_start
&& ecs->sal.end < ecs->stop_func_end)
ecs->stop_func_start = ecs->sal.end;
-#endif
+
+ /* Architectures which require breakpoint adjustment might not be able
+ to place a breakpoint at the computed address. If so, the test
+ ``ecs->stop_func_start == stop_pc'' will never succeed. Adjust
+ ecs->stop_func_start to an address at which a breakpoint may be
+ legitimately placed.
+
+ Note: kevinb/2004-01-19: On FR-V, if this adjustment is not
+ made, GDB will enter an infinite loop when stepping through
+ optimized code consisting of VLIW instructions which contain
+ subinstructions corresponding to different source lines. On
+ FR-V, it's not permitted to place a breakpoint on any but the
+ first subinstruction of a VLIW instruction. When a breakpoint is
+ set, GDB will adjust the breakpoint address to the beginning of
+ the VLIW instruction. Thus, we need to make the corresponding
+ adjustment here when computing the stop address. */
+
+ if (gdbarch_adjust_breakpoint_address_p (current_gdbarch))
+ {
+ ecs->stop_func_start
+ = gdbarch_adjust_breakpoint_address (current_gdbarch,
+ ecs->stop_func_start);
+ }
if (ecs->stop_func_start == stop_pc)
{
else
{
/* Put the step-breakpoint there and go until there. */
- INIT_SAL (&sr_sal); /* initialize to zeroes */
+ init_sal (&sr_sal); /* initialize to zeroes */
sr_sal.pc = ecs->stop_func_start;
sr_sal.section = find_pc_overlay (ecs->stop_func_start);
/* Do not specify what the fp should be when we stop since on
established. */
check_for_old_step_resume_breakpoint ();
step_resume_breakpoint =
- set_momentary_breakpoint (sr_sal, NULL, bp_step_resume);
+ set_momentary_breakpoint (sr_sal, null_frame_id, bp_step_resume);
if (breakpoints_inserted)
insert_breakpoints ();
However, if the callee is recursing, we want to be careful not to
catch returns of those recursive calls, but only of THIS instance
- of the call.
+ of the caller.
To do this, we set the step_resume bp's frame to our current
- caller's frame (step_frame_address, which is set by the "next" or
- "until" command, before execution begins). */
+ caller's frame (obtained by doing a frame ID unwind). */
static void
step_over_function (struct execution_control_state *ecs)
{
struct symtab_and_line sr_sal;
+ struct frame_id sr_id;
+
+ init_sal (&sr_sal); /* initialize to zeros */
+
+ /* NOTE: cagney/2003-04-06:
- INIT_SAL (&sr_sal); /* initialize to zeros */
- sr_sal.pc = ADDR_BITS_REMOVE (SAVED_PC_AFTER_CALL (get_current_frame ()));
+ At this point the equality get_frame_pc() == get_frame_func()
+ should hold. This may make it possible for this code to tell the
+ frame where it's function is, instead of the reverse. This would
+ avoid the need to search for the frame's function, which can get
+ very messy when there is no debug info available (look at the
+ heuristic find pc start code found in targets like the MIPS). */
+
+ /* NOTE: cagney/2003-04-06:
+
+ The intent of DEPRECATED_SAVED_PC_AFTER_CALL was to:
+
+ - provide a very light weight equivalent to frame_unwind_pc()
+ (nee FRAME_SAVED_PC) that avoids the prologue analyzer
+
+ - avoid handling the case where the PC hasn't been saved in the
+ prologue analyzer
+
+ Unfortunately, not five lines further down, is a call to
+ get_frame_id() and that is guarenteed to trigger the prologue
+ analyzer.
+
+ The `correct fix' is for the prologe analyzer to handle the case
+ where the prologue is incomplete (PC in prologue) and,
+ consequently, the return pc has not yet been saved. It should be
+ noted that the prologue analyzer needs to handle this case
+ anyway: frameless leaf functions that don't save the return PC;
+ single stepping through a prologue.
+
+ The d10v handles all this by bailing out of the prologue analsis
+ when it reaches the current instruction. */
+
+ if (DEPRECATED_SAVED_PC_AFTER_CALL_P ())
+ sr_sal.pc = ADDR_BITS_REMOVE (DEPRECATED_SAVED_PC_AFTER_CALL (get_current_frame ()));
+ else
+ sr_sal.pc = ADDR_BITS_REMOVE (frame_pc_unwind (get_current_frame ()));
sr_sal.section = find_pc_overlay (sr_sal.pc);
check_for_old_step_resume_breakpoint ();
- step_resume_breakpoint =
- set_momentary_breakpoint (sr_sal, get_current_frame (), bp_step_resume);
- if (step_frame_address && !IN_SOLIB_DYNSYM_RESOLVE_CODE (sr_sal.pc))
- step_resume_breakpoint->frame = step_frame_address;
+ /* NOTE: cagney/2004-03-15: Code using the current value of
+ "step_frame_id", instead of unwinding that frame ID, removed (at
+ least for non-legacy platforms). On s390 GNU/Linux, after taking
+ a signal, the program is directly resumed at the signal handler
+ and, consequently, the PC would point at at the first instruction
+ of that signal handler but STEP_FRAME_ID would [incorrectly] at
+ the interrupted code when it should point at the signal
+ trampoline. By always and locally doing a frame ID unwind, it's
+ possible to assert that the code is always using the correct
+ ID. */
+ if (legacy_frame_p (current_gdbarch))
+ {
+ if (frame_id_p (step_frame_id)
+ && !IN_SOLIB_DYNSYM_RESOLVE_CODE (sr_sal.pc))
+ /* NOTE: cagney/2004-02-27: Use the global state's idea of the
+ stepping frame ID. I suspect this is done as it is lighter
+ weight than a call to get_prev_frame. */
+ /* NOTE: cagney/2004-03-15: See comment above about how this
+ is also broken. */
+ sr_id = step_frame_id;
+ else
+ /* NOTE: cagney/2004-03-15: This is the way it was 'cos this
+ is the way it always was. It should be using the unwound
+ (or caller's) ID, and not this (or the callee's) ID. It
+ appeared to work because: legacy architectures used the
+ wrong end of the frame for the ID.stack (inner-most rather
+ than outer-most) so that the callee's id.stack (un
+ adjusted) matched the caller's id.stack giving the
+ "correct" id; more often than not
+ !IN_SOLIB_DYNSYM_RESOLVE_CODE and hence the code above (it
+ was originally later in the function) fixed the ID by using
+ global state. */
+ sr_id = get_frame_id (get_current_frame ());
+ }
+ else
+ sr_id = get_frame_id (get_prev_frame (get_current_frame ()));
+
+ step_resume_breakpoint = set_momentary_breakpoint (sr_sal, sr_id, bp_step_resume);
if (breakpoints_inserted)
insert_breakpoints ();
static void
stop_stepping (struct execution_control_state *ecs)
{
- if (target_has_execution)
- {
- /* Are we stopping for a vfork event? We only stop when we see
- the child's event. However, we may not yet have seen the
- parent's event. And, inferior_ptid is still set to the
- parent's pid, until we resume again and follow either the
- parent or child.
-
- To ensure that we can really touch inferior_ptid (aka, the
- parent process) -- which calls to functions like read_pc
- implicitly do -- wait on the parent if necessary. */
- if ((pending_follow.kind == TARGET_WAITKIND_VFORKED)
- && !pending_follow.fork_event.saw_parent_fork)
- {
- ptid_t parent_ptid;
-
- do
- {
- if (target_wait_hook)
- parent_ptid = target_wait_hook (pid_to_ptid (-1), &(ecs->ws));
- else
- parent_ptid = target_wait (pid_to_ptid (-1), &(ecs->ws));
- }
- while (!ptid_equal (parent_ptid, inferior_ptid));
- }
-
- /* Assuming the inferior still exists, set these up for next
- time, just like we did above if we didn't break out of the
- loop. */
- prev_pc = read_pc ();
- prev_func_start = ecs->stop_func_start;
- prev_func_name = ecs->stop_func_name;
- }
-
/* Let callers know we don't want to wait for the inferior anymore. */
ecs->wait_some_more = 0;
}
static void
keep_going (struct execution_control_state *ecs)
{
- /* ??rehrauer: ttrace on HP-UX theoretically allows one to debug a
- vforked child between its creation and subsequent exit or call to
- exec(). However, I had big problems in this rather creaky exec
- engine, getting that to work. The fundamental problem is that
- I'm trying to debug two processes via an engine that only
- understands a single process with possibly multiple threads.
-
- Hence, this spot is known to have problems when
- target_can_follow_vfork_prior_to_exec returns 1. */
-
/* Save the pc before execution, to compare with pc after stop. */
prev_pc = read_pc (); /* Might have been DECR_AFTER_BREAK */
- prev_func_start = ecs->stop_func_start; /* Ok, since if DECR_PC_AFTER
- BREAK is defined, the
- original pc would not have
- been at the start of a
- function. */
- prev_func_name = ecs->stop_func_name;
if (ecs->update_step_sp)
step_sp = read_sp ();
if (stop_signal == TARGET_SIGNAL_TRAP && !signal_program[stop_signal])
stop_signal = TARGET_SIGNAL_0;
-#ifdef SHIFT_INST_REGS
- /* I'm not sure when this following segment applies. I do know,
- now, that we shouldn't rewrite the regs when we were stopped
- by a random signal from the inferior process. */
- /* FIXME: Shouldn't this be based on the valid bit of the SXIP?
- (this is only used on the 88k). */
-
- if (!bpstat_explains_signal (stop_bpstat)
- && (stop_signal != TARGET_SIGNAL_CHLD) && !stopped_by_random_signal)
- SHIFT_INST_REGS ();
-#endif /* SHIFT_INST_REGS */
resume (currently_stepping (ecs), stop_signal);
}
void
normal_stop (void)
{
+ struct target_waitstatus last;
+ ptid_t last_ptid;
+
+ get_last_target_status (&last_ptid, &last);
+
/* As with the notification of thread events, we want to delay
notifying the user that we've switched thread context until
the inferior actually stops.
- (Note that there's no point in saying anything if the inferior
- has exited!) */
+ There's no point in saying anything if the inferior has exited.
+ Note that SIGNALLED here means "exited with a signal", not
+ "received a signal". */
if (!ptid_equal (previous_inferior_ptid, inferior_ptid)
- && target_has_execution)
+ && target_has_execution
+ && last.kind != TARGET_WAITKIND_SIGNALLED
+ && last.kind != TARGET_WAITKIND_EXITED)
{
target_terminal_ours_for_output ();
printf_filtered ("[Switching to %s]\n",
previous_inferior_ptid = inferior_ptid;
}
+ /* NOTE drow/2004-01-17: Is this still necessary? */
/* Make sure that the current_frame's pc is correct. This
is a correction for setting up the frame info before doing
DECR_PC_AFTER_BREAK */
- if (target_has_execution && get_current_frame ())
- (get_current_frame ())->pc = read_pc ();
+ if (target_has_execution)
+ /* FIXME: cagney/2002-12-06: Has the PC changed? Thanks to
+ DECR_PC_AFTER_BREAK, the program counter can change. Ask the
+ frame code to check for this and sort out any resultant mess.
+ DECR_PC_AFTER_BREAK needs to just go away. */
+ deprecated_update_frame_pc_hack (get_current_frame (), read_pc ());
if (target_has_execution && breakpoints_inserted)
{
bpstat_print() contains the logic deciding in detail
what to print, based on the event(s) that just occurred. */
- if (stop_print_frame && selected_frame)
+ if (stop_print_frame && deprecated_selected_frame)
{
int bpstat_ret;
int source_flag;
switch (bpstat_ret)
{
case PRINT_UNKNOWN:
+ /* FIXME: cagney/2002-12-01: Given that a frame ID does
+ (or should) carry around the function and does (or
+ should) use that when doing a frame comparison. */
if (stop_step
- && step_frame_address == FRAME_FP (get_current_frame ())
+ && frame_id_eq (step_frame_id,
+ get_frame_id (get_current_frame ()))
&& step_start_function == find_pc_function (stop_pc))
source_flag = SRC_LINE; /* finished step, just print source line */
else
LOCATION: Print only location
SRC_AND_LOC: Print location and source line */
if (do_frame_printing)
- show_and_print_stack_frame (selected_frame, -1, source_flag);
+ print_stack_frame (deprecated_selected_frame, -1, source_flag);
/* Display the auto-display expressions. */
do_displays ();
if (stop_stack_dummy)
{
- /* Pop the empty frame that contains the stack dummy.
- POP_FRAME ends with a setting of the current frame, so we
- can use that next. */
- POP_FRAME;
+ /* Pop the empty frame that contains the stack dummy. POP_FRAME
+ ends with a setting of the current frame, so we can use that
+ next. */
+ frame_pop (get_current_frame ());
/* Set stop_pc to what it was before we called the function.
Can't rely on restore_inferior_status because that only gets
called if we don't stop in the called function. */
done:
annotate_stopped ();
+ observer_notify_normal_stop ();
}
static int
}
int
-signal_stop_update (signo, state)
- int signo;
- int state;
+signal_stop_update (int signo, int state)
{
int ret = signal_stop[signo];
signal_stop[signo] = state;
}
int
-signal_print_update (signo, state)
- int signo;
- int state;
+signal_print_update (int signo, int state)
{
int ret = signal_print[signo];
signal_print[signo] = state;
}
int
-signal_pass_update (signo, state)
- int signo;
- int state;
+signal_pass_update (int signo, int state)
{
int ret = signal_program[signo];
signal_program[signo] = state;
int trap_expected;
CORE_ADDR step_range_start;
CORE_ADDR step_range_end;
- CORE_ADDR step_frame_address;
+ struct frame_id step_frame_id;
enum step_over_calls_kind step_over_calls;
CORE_ADDR step_resume_break_address;
int stop_after_trap;
- int stop_soon_quietly;
+ int stop_soon;
struct regcache *stop_registers;
/* These are here because if call_function_by_hand has written some
write_inferior_status_register (struct inferior_status *inf_status, int regno,
LONGEST val)
{
- int size = REGISTER_RAW_SIZE (regno);
+ int size = DEPRECATED_REGISTER_RAW_SIZE (regno);
void *buf = alloca (size);
store_signed_integer (buf, size, val);
regcache_raw_write (inf_status->registers, regno, buf);
inf_status->trap_expected = trap_expected;
inf_status->step_range_start = step_range_start;
inf_status->step_range_end = step_range_end;
- inf_status->step_frame_address = step_frame_address;
+ inf_status->step_frame_id = step_frame_id;
inf_status->step_over_calls = step_over_calls;
inf_status->stop_after_trap = stop_after_trap;
- inf_status->stop_soon_quietly = stop_soon_quietly;
+ inf_status->stop_soon = stop_soon;
/* Save original bpstat chain here; replace it with copy of chain.
If caller's caller is walking the chain, they'll be happier if we
hand them back the original chain when restore_inferior_status is
inf_status->registers = regcache_dup (current_regcache);
- get_frame_id (selected_frame, &inf_status->selected_frame_id);
+ inf_status->selected_frame_id = get_frame_id (deprecated_selected_frame);
return inf_status;
}
frame = frame_find_by_id (*fid);
- /* If inf_status->selected_frame_address is NULL, there was no
- previously selected frame. */
+ /* If inf_status->selected_frame_id is NULL, there was no previously
+ selected frame. */
if (frame == NULL)
{
warning ("Unable to restore previously selected frame.\n");
trap_expected = inf_status->trap_expected;
step_range_start = inf_status->step_range_start;
step_range_end = inf_status->step_range_end;
- step_frame_address = inf_status->step_frame_address;
+ step_frame_id = inf_status->step_frame_id;
step_over_calls = inf_status->step_over_calls;
stop_after_trap = inf_status->stop_after_trap;
- stop_soon_quietly = inf_status->stop_soon_quietly;
+ stop_soon = inf_status->stop_soon;
bpstat_clear (&stop_bpstat);
stop_bpstat = inf_status->stop_bpstat;
breakpoint_proceeded = inf_status->breakpoint_proceeded;
xfree (inf_status);
}
+int
+inferior_has_forked (int pid, int *child_pid)
+{
+ struct target_waitstatus last;
+ ptid_t last_ptid;
+
+ get_last_target_status (&last_ptid, &last);
+
+ if (last.kind != TARGET_WAITKIND_FORKED)
+ return 0;
+
+ if (ptid_get_pid (last_ptid) != pid)
+ return 0;
+
+ *child_pid = last.value.related_pid;
+ return 1;
+}
+
+int
+inferior_has_vforked (int pid, int *child_pid)
+{
+ struct target_waitstatus last;
+ ptid_t last_ptid;
+
+ get_last_target_status (&last_ptid, &last);
+
+ if (last.kind != TARGET_WAITKIND_VFORKED)
+ return 0;
+
+ if (ptid_get_pid (last_ptid) != pid)
+ return 0;
+
+ *child_pid = last.value.related_pid;
+ return 1;
+}
+
+int
+inferior_has_execd (int pid, char **execd_pathname)
+{
+ struct target_waitstatus last;
+ ptid_t last_ptid;
+
+ get_last_target_status (&last_ptid, &last);
+
+ if (last.kind != TARGET_WAITKIND_EXECD)
+ return 0;
+
+ if (ptid_get_pid (last_ptid) != pid)
+ return 0;
+
+ *execd_pathname = xstrdup (last.value.execd_pathname);
+ return 1;
+}
+
/* Oft used ptids */
ptid_t null_ptid;
ptid_t minus_one_ptid;
void
_initialize_infrun (void)
{
- register int i;
- register int numsigs;
+ int i;
+ int numsigs;
struct cmd_list_element *c;
- register_gdbarch_swap (&stop_registers, sizeof (stop_registers), NULL);
- register_gdbarch_swap (NULL, 0, build_infrun);
+ DEPRECATED_REGISTER_GDBARCH_SWAP (stop_registers);
+ deprecated_register_gdbarch_swap (NULL, 0, build_infrun);
add_info ("signals", signals_info,
"What debugger does when program gets various signals.\n\
c = add_set_enum_cmd ("follow-fork-mode",
class_run,
follow_fork_mode_kind_names, &follow_fork_mode_string,
-/* ??rehrauer: The "both" option is broken, by what may be a 10.20
- kernel problem. It's also not terribly useful without a GUI to
- help the user drive two debuggers. So for now, I'm disabling
- the "both" option. */
-/* "Set debugger response to a program call of fork \
- or vfork.\n\
- A fork or vfork creates a new process. follow-fork-mode can be:\n\
- parent - the original process is debugged after a fork\n\
- child - the new process is debugged after a fork\n\
- both - both the parent and child are debugged after a fork\n\
- ask - the debugger will ask for one of the above choices\n\
- For \"both\", another copy of the debugger will be started to follow\n\
- the new child process. The original debugger will continue to follow\n\
- the original parent process. To distinguish their prompts, the\n\
- debugger copy's prompt will be changed.\n\
- For \"parent\" or \"child\", the unfollowed process will run free.\n\
- By default, the debugger will follow the parent process.",
- */
"Set debugger response to a program call of fork \
or vfork.\n\
A fork or vfork creates a new process. follow-fork-mode can be:\n\
parent - the original process is debugged after a fork\n\
child - the new process is debugged after a fork\n\
- ask - the debugger will ask for one of the above choices\n\
-For \"parent\" or \"child\", the unfollowed process will run free.\n\
+The unfollowed process will continue to run.\n\
By default, the debugger will follow the parent process.", &setlist);
add_show_from_set (c, &showlist);