-/* Copyright (C) 1988, 1990 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-
-#include <stdio.h>
-#include "defs.h"
-#include "param.h"
-#include "frame.h"
-#include "inferior.h"
-#include "value.h"
-
-#ifdef USG
-#include <sys/types.h>
-#endif
-
-#include <sys/param.h>
-#include <sys/dir.h>
-#include <signal.h>
-#include "gdbcore.h"
-#include <sys/user.h>
-#ifndef USER /* added to support BCS ptrace_user */
-
-#define USER ptrace_user
-#endif
-#include <sys/ioctl.h>
-#include <fcntl.h>
-
-#include <sys/file.h>
-#include <sys/stat.h>
-
-#include "symtab.h"
-#include "setjmp.h"
-#include "value.h"
-
-int stack_error;
-jmp_buf stack_jmp;
-
-void
-tdesc_error_function (environment, continuable, message)
-dc_word_t environment;
-dc_boolean_t continuable;
-char *message;
-{
- if (stack_error) longjmp (stack_jmp, 1);
- if (!continuable)
- {
- printf("%s\n",message);
- abort();
- }
-}
-
-
-void
-tdesc_read_function (environment, memory, length, buffer)
-dc_word_t environment;
-dc_word_t memory;
-int length;
-char *buffer;
-{
- int ptrace_code;
- errno = 0;
- if (memory < 2048)
-#if 0
- /* This is a no-op! It sets buffer, but doesn't do anything to
- what buffer points to. What does this function do anyway?
- And this is wrong for cross-debugging. */
- buffer = ptrace (3, inferior_pid, memory, 0);
-#else
- return;
-#endif
- else
- read_memory (memory, buffer, length);
-}
-
-/* Map function for tdesc */
-void
-tdesc_map_function (map_env, loc, map_info_in, map_info_out)
-dc_word_t map_env;
-dc_word_t loc;
-dc_map_info_in_t map_info_in;
-dc_map_info_out_t *map_info_out;
-{
-int map_flags = DC_MIO_ENTRY_POINT | DC_MIO_IMPLICIT_PROLOGUE_END;
-int entry_point = get_pc_function_start(loc);
-map_info_out->flags = map_flags;
-map_info_out->entry_point = entry_point;
-}
-
-dc_handle_t tdesc_handle;
-
-extern int debug_info;
-
-void
-init_tdesc ()
-{
- tdesc_handle = dc_initiate (debug_info, tdesc_error_function,
- 0,tdesc_read_function,0,0,0,0,0,tdesc_map_function,0);
-}
-dc_dcontext_t current_context;
-
-/* setup current context, called from wait_for_inferior */
-
-dc_dcontext_t
-init_dcontext()
-{
- dc_word_t reg_info[DC_NUM_REG];
- dc_word_t reg_flags[2] = {0,-1};
- dc_word_t aux_info[DC_NUM_AUX];
- dc_word_t aux_flags[2] = {0,-1};
- dc_exactness_t loc_exact = DC_NO;
- dc_word_t psr_info;
- dc_boolean_t psr_ind = 0;
- dc_word_t psr_flags[2] = {0,-1};
-
- bcopy (®isters, reg_info, DC_NUM_REG * 4);
- aux_info[DC_AUX_LOC] = read_register(SXIP_REGNUM);
- aux_info[DC_AUX_SXIP] = read_register(SXIP_REGNUM);
- aux_info[DC_AUX_SNIP] = read_register(SNIP_REGNUM);
- aux_info[DC_AUX_SFIP] = read_register(SFIP_REGNUM);
- aux_info[DC_AUX_FPSR] = read_register(FPSR_REGNUM);
- aux_info[DC_AUX_FPCR] = read_register(FPCR_REGNUM);
-
- psr_info = read_register(PSR_REGNUM);
-
- return dc_make_dcontext (tdesc_handle, reg_info, reg_flags, aux_info,
- aux_flags, loc_exact, psr_info, psr_ind, psr_flags);
-}
-
-
-dc_dcontext_t
-get_prev_context (context)
- dc_dcontext_t context;
-{
- return current_context = dc_previous_dcontext (context);
-}
-
-
-
-
-/* Determine frame base for this file's frames. This will be either
- the CFA or the old style FP_REGNUM; the symtab for the current pc's
- file has the information */
-
-CORE_ADDR
-get_frame_base(pc)
-CORE_ADDR pc;
-{
- struct symtab *this_file = find_pc_symtab(pc);
- int coffsem_frame_position;
-
- /* If this_file is null, there's a good chance the file was compiled
- without -g. If that's the case, use CFA (canonical frame addr)
- as the default frame pointer. */
-
- if (this_file)
- {
- coffsem_frame_position = this_file->coffsem & 3;
- if (coffsem_frame_position == 1)
- return (CORE_ADDR) dc_general_register (current_context, FP_REGNUM);
- else
- /* default is CFA, as well as if coffsem==2 */
- return (CORE_ADDR) dc_frame_address (current_context);
- }
-
- return (CORE_ADDR) dc_frame_address (current_context);
-}
-
-#if TARGET_BYTE_ORDER != HOST_BYTE_ORDER
-you lose
-#else /* Host and target byte order the same. */
-#define SINGLE_EXP_BITS 8
-#define DOUBLE_EXP_BITS 11
-int
-IEEE_isNAN(fp, len)
- int *fp, len;
- /* fp points to a single precision OR double precision
- * floating point value; len is the number of bytes, either 4 or 8.
- * Returns 1 iff fp points to a valid IEEE floating point number.
- * Returns 0 if fp points to a denormalized number or a NaN
- */
-{
- int exponent;
- if (len == 4)
- {
- exponent = *fp;
- exponent = exponent << 1 >> (32 - SINGLE_EXP_BITS - 1);
- return ((exponent == -1) || (! exponent && *fp));
- }
- else if (len == 8)
- {
- exponent = *(fp+1);
- exponent = exponent << 1 >> (32 - DOUBLE_EXP_BITS - 1);
- return ((exponent == -1) || (! exponent && *fp * *(fp+1)));
- }
- else return 1;
-}
-#endif /* Host and target byte order the same. */
-
-#define FIRST_PRESERVED_REGNUM 14
-#define LAST_PRESERVED_REGNUM 25
-#define FIRST_PARM_REGNUM 2
-#define LAST_PARM_REGNUM 9
-
-#define MAX_REG_PARMS (LAST_PARM_REGNUM - FIRST_PARM_REGNUM + 1)
-
-void
-frame_find_saved_regs (fi, fsr)
- struct frame_info *fi;
- struct frame_saved_regs *fsr;
-{
- register int regnum;
-
- error ("Feature not implemented for the 88k yet.");
- return;
-
-#if 0
- for (regnum = FIRST_PARM_REGNUM; regnum <= LAST_PARM_REGNUM; regnum++)
- fsr->regs[regnum]
- = (unsigned) fi->frame - ((regnum - FIRST_PARM_REGNUM) * 4);
-
- fsr->regs[SP_REGNUM] = 0; /* SP not saved in frames */
- fsr->regs[FP_REGNUM] = fi->frame;
- fsr->regs[PC_REGNUM] = fi->frame + 4;
-#endif
-}
-
-static int
-pushed_size (prev_words, v)
- int prev_words;
- struct value *v;
-{
- switch (TYPE_CODE (VALUE_TYPE (v)))
- {
- case TYPE_CODE_VOID: /* Void type (values zero length) */
-
- return 0; /* That was easy! */
-
- case TYPE_CODE_PTR: /* Pointer type */
- case TYPE_CODE_ENUM: /* Enumeration type */
- case TYPE_CODE_INT: /* Integer type */
- case TYPE_CODE_REF: /* C++ Reference types */
- case TYPE_CODE_ARRAY: /* Array type, lower bound zero */
-
- return 1;
-
- case TYPE_CODE_FLT: /* Floating type */
-
- if (TYPE_LENGTH (VALUE_TYPE (v)) == 4)
- return 1;
- else
- /* Assume that it must be a double. */
- if (prev_words & 1) /* at an odd-word boundary */
- return 3; /* round to 8-byte boundary */
- else
- return 2;
-
- case TYPE_CODE_STRUCT: /* C struct or Pascal record */
- case TYPE_CODE_UNION: /* C union or Pascal variant part */
-
- return (((TYPE_LENGTH (VALUE_TYPE (v)) + 3) / 4) * 4);
-
- case TYPE_CODE_FUNC: /* Function type */
- case TYPE_CODE_SET: /* Pascal sets */
- case TYPE_CODE_RANGE: /* Range (integers within bounds) */
- case TYPE_CODE_PASCAL_ARRAY: /* Array with explicit type of index */
- case TYPE_CODE_MEMBER: /* Member type */
- case TYPE_CODE_METHOD: /* Method type */
- /* Don't know how to pass these yet. */
-
- case TYPE_CODE_UNDEF: /* Not used; catches errors */
- default:
- abort ();
- }
-}
-
-static void
-store_parm_word (address, val)
- CORE_ADDR address;
- int val;
-{
- write_memory (address, &val, 4);
-}
-
-static int
-store_parm (prev_words, left_parm_addr, v)
- unsigned int prev_words;
- CORE_ADDR left_parm_addr;
- struct value *v;
-{
- CORE_ADDR start = left_parm_addr + (prev_words * 4);
- int *val_addr = (int *)VALUE_CONTENTS(v);
-
- switch (TYPE_CODE (VALUE_TYPE (v)))
- {
- case TYPE_CODE_VOID: /* Void type (values zero length) */
-
- return 0;
-
- case TYPE_CODE_PTR: /* Pointer type */
- case TYPE_CODE_ENUM: /* Enumeration type */
- case TYPE_CODE_INT: /* Integer type */
- case TYPE_CODE_ARRAY: /* Array type, lower bound zero */
- case TYPE_CODE_REF: /* C++ Reference types */
-
- store_parm_word (start, *val_addr);
- return 1;
-
- case TYPE_CODE_FLT: /* Floating type */
-
- if (TYPE_LENGTH (VALUE_TYPE (v)) == 4)
- {
- store_parm_word (start, *val_addr);
- return 1;
- }
- else
- {
- store_parm_word (start + ((prev_words & 1) * 4), val_addr[0]);
- store_parm_word (start + ((prev_words & 1) * 4) + 4, val_addr[1]);
- return 2 + (prev_words & 1);
- }
-
- case TYPE_CODE_STRUCT: /* C struct or Pascal record */
- case TYPE_CODE_UNION: /* C union or Pascal variant part */
-
- {
- unsigned int words = (((TYPE_LENGTH (VALUE_TYPE (v)) + 3) / 4) * 4);
- unsigned int word;
-
- for (word = 0; word < words; word++)
- store_parm_word (start + (word * 4), val_addr[word]);
- return words;
- }
-
- default:
- abort ();
- }
-}
-
- /* This routine sets up all of the parameter values needed to make a pseudo
- call. The name "push_parameters" is a misnomer on some archs,
- because (on the m88k) most parameters generally end up being passed in
- registers rather than on the stack. In this routine however, we do
- end up storing *all* parameter values onto the stack (even if we will
- realize later that some of these stores were unnecessary). */
-
-void
-push_parameters (return_type, struct_conv, nargs, args)
- struct type *return_type;
- int struct_conv;
- int nargs;
- value *args;
- {
- int parm_num;
- unsigned int p_words = 0;
- CORE_ADDR left_parm_addr;
-
- /* Start out by creating a space for the return value (if need be). We
- only need to do this if the return value is a struct or union. If we
- do make a space for a struct or union return value, then we must also
- arrange for the base address of that space to go into r12, which is the
- standard place to pass the address of the return value area to the
- callee. Note that only structs and unions are returned in this fashion.
- Ints, enums, pointers, and floats are returned into r2. Doubles are
- returned into the register pair {r2,r3}. Note also that the space
- reserved for a struct or union return value only has to be word aligned
- (not double-word) but it is double-word aligned here anyway (just in
- case that becomes important someday). */
-
- switch (TYPE_CODE (return_type))
- {
- case TYPE_CODE_STRUCT:
- case TYPE_CODE_UNION:
- {
- int return_bytes = ((TYPE_LENGTH (return_type) + 7) / 8) * 8;
- CORE_ADDR rv_addr;
-
- rv_addr = read_register (SP_REGNUM) - return_bytes;
-
- write_register (SP_REGNUM, rv_addr); /* push space onto the stack */
- write_register (SRA_REGNUM, rv_addr);/* set return value register */
- }
- }
-
- /* Here we make a pre-pass on the whole parameter list to figure out exactly
- how many words worth of stuff we are going to pass. */
-
- for (p_words = 0, parm_num = 0; parm_num < nargs; parm_num++)
- p_words += pushed_size (p_words, value_arg_coerce (args[parm_num]));
-
- /* Now, check to see if we have to round up the number of parameter words
- to get up to the next 8-bytes boundary. This may be necessary because
- of the software convention to always keep the stack aligned on an 8-byte
- boundary. */
-
- if (p_words & 1)
- p_words++; /* round to 8-byte boundary */
-
- /* Now figure out the absolute address of the leftmost parameter, and update
- the stack pointer to point at that address. */
-
- left_parm_addr = read_register (SP_REGNUM) - (p_words * 4);
- write_register (SP_REGNUM, left_parm_addr);
-
- /* Now we can go through all of the parameters (in left-to-right order)
- and write them to their parameter stack slots. Note that we are not
- really "pushing" the parameter values. The stack space for these values
- was already allocated above. Now we are just filling it up. */
-
- for (p_words = 0, parm_num = 0; parm_num < nargs; parm_num++)
- p_words +=
- store_parm (p_words, left_parm_addr, value_arg_coerce (args[parm_num]));
-
- /* Now that we are all done storing the parameter values into the stack, we
- must go back and load up the parameter registers with the values from the
- corresponding stack slots. Note that in the two cases of (a) gaps in the
- parameter word sequence causes by (otherwise) misaligned doubles, and (b)
- slots correcponding to structs or unions, the work we do here in loading
- some parameter registers may be unnecessary, but who cares? */
-
- for (p_words = 0; p_words < 8; p_words++)
- {
- write_register (FIRST_PARM_REGNUM + p_words,
- read_memory_integer (left_parm_addr + (p_words * 4), 4));
- }
-}
-
-void
-pop_frame ()
-{
- error ("Feature not implemented for the m88k yet.");
- return;
-}
-
- void
- collect_returned_value (rval, value_type, struct_return, nargs, args)
- value *rval;
- struct type *value_type;
- int struct_return;
- int nargs;
- value *args;
- {
- char retbuf[REGISTER_BYTES];
-
- bcopy (registers, retbuf, REGISTER_BYTES);
- *rval = value_being_returned (value_type, retbuf, struct_return);
- return;
- }
-
-#if 0
-/* Now handled in a machine independent way with CALL_DUMMY_LOCATION. */
- /* Stuff a breakpoint instruction onto the stack (or elsewhere if the stack
- is not a good place for it). Return the address at which the instruction
- got stuffed, or zero if we were unable to stuff it anywhere. */
-
- CORE_ADDR
- push_breakpoint ()
- {
- static char breakpoint_insn[] = BREAKPOINT;
- extern CORE_ADDR text_end; /* of inferior */
- static char readback_buffer[] = BREAKPOINT;
- int i;
-
- /* With a little bit of luck, we can just stash the breakpoint instruction
- in the word just beyond the end of normal text space. For systems on
- which the hardware will not allow us to execute out of the stack segment,
- we have to hope that we *are* at least allowed to effectively extend the
- text segment by one word. If the actual end of user's the text segment
- happens to fall right at a page boundary this trick may fail. Note that
- we check for this by reading after writing, and comparing in order to
- be sure that the write worked. */
-
- write_memory (text_end, &breakpoint_insn, 4);
-
- /* Fill the readback buffer with some garbage which is certain to be
- unequal to the breakpoint insn. That way we can tell if the
- following read doesn't actually succeed. */
-
- for (i = 0; i < sizeof (readback_buffer); i++)
- readback_buffer[i] = ~ readback_buffer[i]; /* Invert the bits */
-
- /* Now check that the breakpoint insn was successfully installed. */
-
- read_memory (text_end, readback_buffer, sizeof (readback_buffer));
- for (i = 0; i < sizeof (readback_buffer); i++)
- if (readback_buffer[i] != breakpoint_insn[i])
- return 0; /* Failed to install! */
-
- return text_end;
- }
-#endif
-
-/* Like dc_psr_register but takes an extra int arg. */
-static dc_word_t
-psr_register (context, dummy)
- dc_dcontext_t context;
- int dummy;
-{
- return dc_psr_register (context);
-}
-
-/* Same functionality as get_saved_register in findvar.c, but implemented
- to use tdesc. */
-void
-get_saved_register (raw_buffer, optim, addrp, frame, regnum, lvalp)
- char *raw_buffer;
- int *optim;
- CORE_ADDR *addrp;
- FRAME frame;
- int regnum;
- enum lval_type *lvalp;
-{
- struct frame_info *fi = get_frame_info (frame);
-
- /* Functions to say whether a register is optimized out, and
- if not, to get the value. Take as args a context and the
- value of get_reg_arg. */
- int (*get_reg_state) ();
- dc_word_t (*get_reg) ();
- int get_reg_arg;
-
- /* Because tdesc doesn't tell us whether it got it from a register
- or memory, always say we don't have an address for it. */
- if (addrp != NULL)
- *addrp = 0;
-
- if (regnum < DC_NUM_REG)
- {
- get_reg_state = dc_general_register_state;
- get_reg = dc_general_register;
- get_reg_arg = regnum;
- }
- else
- {
- get_reg_state = dc_auxiliary_register_state;
- get_reg = dc_auxiliary_register;
- switch (regnum)
- {
- case SXIP_REGNUM:
- get_reg_arg = DC_AUX_SXIP;
- break;
- case SNIP_REGNUM:
- get_reg_arg = DC_AUX_SNIP;
- break;
- case FPSR_REGNUM:
- get_reg_arg = DC_AUX_FPSR;
- break;
- case FPCR_REGNUM:
- get_reg_arg = DC_AUX_FPCR;
- break;
- case PSR_REGNUM:
- get_reg_state = dc_psr_register_bit_state;
- get_reg = psr_register;
- get_reg_arg = 0;
- break;
- default:
- if (optim != NULL)
- *optim = 1;
- return;
- }
- }
-
- if ((*get_reg_state) (fi->frame_context, get_reg_arg))
- {
- if (raw_buffer != NULL)
- *(int *)raw_buffer = (*get_reg) (fi->frame_context, get_reg_arg);
- if (optim != NULL)
- *optim = 0;
- return;
- }
- else
- {
- if (optim != NULL)
- *optim = 1;
- return;
- }
-
- /* Well, the caller can't treat it as a register or memory... */
- if (lvalp != NULL)
- *lvalp = not_lval;
-}
+// OBSOLETE /* Target-machine dependent code for Motorola 88000 series, for GDB.
+// OBSOLETE
+// OBSOLETE Copyright 1988, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998,
+// OBSOLETE 2000, 2001, 2002 Free Software Foundation, Inc.
+// OBSOLETE
+// OBSOLETE This file is part of GDB.
+// OBSOLETE
+// OBSOLETE This program is free software; you can redistribute it and/or modify
+// OBSOLETE it under the terms of the GNU General Public License as published by
+// OBSOLETE the Free Software Foundation; either version 2 of the License, or
+// OBSOLETE (at your option) any later version.
+// OBSOLETE
+// OBSOLETE This program is distributed in the hope that it will be useful,
+// OBSOLETE but WITHOUT ANY WARRANTY; without even the implied warranty of
+// OBSOLETE MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// OBSOLETE GNU General Public License for more details.
+// OBSOLETE
+// OBSOLETE You should have received a copy of the GNU General Public License
+// OBSOLETE along with this program; if not, write to the Free Software
+// OBSOLETE Foundation, Inc., 59 Temple Place - Suite 330,
+// OBSOLETE Boston, MA 02111-1307, USA. */
+// OBSOLETE
+// OBSOLETE #include "defs.h"
+// OBSOLETE #include "frame.h"
+// OBSOLETE #include "inferior.h"
+// OBSOLETE #include "value.h"
+// OBSOLETE #include "gdbcore.h"
+// OBSOLETE #include "symtab.h"
+// OBSOLETE #include "setjmp.h"
+// OBSOLETE #include "value.h"
+// OBSOLETE #include "regcache.h"
+// OBSOLETE
+// OBSOLETE /* Size of an instruction */
+// OBSOLETE #define BYTES_PER_88K_INSN 4
+// OBSOLETE
+// OBSOLETE void frame_find_saved_regs ();
+// OBSOLETE
+// OBSOLETE /* Is this target an m88110? Otherwise assume m88100. This has
+// OBSOLETE relevance for the ways in which we screw with instruction pointers. */
+// OBSOLETE
+// OBSOLETE int target_is_m88110 = 0;
+// OBSOLETE
+// OBSOLETE void
+// OBSOLETE m88k_target_write_pc (CORE_ADDR pc, ptid_t ptid)
+// OBSOLETE {
+// OBSOLETE /* According to the MC88100 RISC Microprocessor User's Manual,
+// OBSOLETE section 6.4.3.1.2:
+// OBSOLETE
+// OBSOLETE ... can be made to return to a particular instruction by placing
+// OBSOLETE a valid instruction address in the SNIP and the next sequential
+// OBSOLETE instruction address in the SFIP (with V bits set and E bits
+// OBSOLETE clear). The rte resumes execution at the instruction pointed to
+// OBSOLETE by the SNIP, then the SFIP.
+// OBSOLETE
+// OBSOLETE The E bit is the least significant bit (bit 0). The V (valid)
+// OBSOLETE bit is bit 1. This is why we logical or 2 into the values we are
+// OBSOLETE writing below. It turns out that SXIP plays no role when
+// OBSOLETE returning from an exception so nothing special has to be done
+// OBSOLETE with it. We could even (presumably) give it a totally bogus
+// OBSOLETE value.
+// OBSOLETE
+// OBSOLETE -- Kevin Buettner */
+// OBSOLETE
+// OBSOLETE write_register_pid (SXIP_REGNUM, pc, ptid);
+// OBSOLETE write_register_pid (SNIP_REGNUM, (pc | 2), ptid);
+// OBSOLETE write_register_pid (SFIP_REGNUM, (pc | 2) + 4, ptid);
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* The type of a register. */
+// OBSOLETE struct type *
+// OBSOLETE m88k_register_type (int regnum)
+// OBSOLETE {
+// OBSOLETE if (regnum >= XFP_REGNUM)
+// OBSOLETE return builtin_type_m88110_ext;
+// OBSOLETE else if (regnum == PC_REGNUM || regnum == FP_REGNUM || regnum == SP_REGNUM)
+// OBSOLETE return builtin_type_void_func_ptr;
+// OBSOLETE else
+// OBSOLETE return builtin_type_int32;
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE
+// OBSOLETE /* The m88k kernel aligns all instructions on 4-byte boundaries. The
+// OBSOLETE kernel also uses the least significant two bits for its own hocus
+// OBSOLETE pocus. When gdb receives an address from the kernel, it needs to
+// OBSOLETE preserve those right-most two bits, but gdb also needs to be careful
+// OBSOLETE to realize that those two bits are not really a part of the address
+// OBSOLETE of an instruction. Shrug. */
+// OBSOLETE
+// OBSOLETE CORE_ADDR
+// OBSOLETE m88k_addr_bits_remove (CORE_ADDR addr)
+// OBSOLETE {
+// OBSOLETE return ((addr) & ~3);
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE
+// OBSOLETE /* Given a GDB frame, determine the address of the calling function's frame.
+// OBSOLETE This will be used to create a new GDB frame struct, and then
+// OBSOLETE INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame.
+// OBSOLETE
+// OBSOLETE For us, the frame address is its stack pointer value, so we look up
+// OBSOLETE the function prologue to determine the caller's sp value, and return it. */
+// OBSOLETE
+// OBSOLETE CORE_ADDR
+// OBSOLETE frame_chain (struct frame_info *thisframe)
+// OBSOLETE {
+// OBSOLETE
+// OBSOLETE frame_find_saved_regs (thisframe, (struct frame_saved_regs *) 0);
+// OBSOLETE /* NOTE: this depends on frame_find_saved_regs returning the VALUE, not
+// OBSOLETE the ADDRESS, of SP_REGNUM. It also depends on the cache of
+// OBSOLETE frame_find_saved_regs results. */
+// OBSOLETE if (thisframe->fsr->regs[SP_REGNUM])
+// OBSOLETE return thisframe->fsr->regs[SP_REGNUM];
+// OBSOLETE else
+// OBSOLETE return thisframe->frame; /* Leaf fn -- next frame up has same SP. */
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE int
+// OBSOLETE frameless_function_invocation (struct frame_info *frame)
+// OBSOLETE {
+// OBSOLETE
+// OBSOLETE frame_find_saved_regs (frame, (struct frame_saved_regs *) 0);
+// OBSOLETE /* NOTE: this depends on frame_find_saved_regs returning the VALUE, not
+// OBSOLETE the ADDRESS, of SP_REGNUM. It also depends on the cache of
+// OBSOLETE frame_find_saved_regs results. */
+// OBSOLETE if (frame->fsr->regs[SP_REGNUM])
+// OBSOLETE return 0; /* Frameful -- return addr saved somewhere */
+// OBSOLETE else
+// OBSOLETE return 1; /* Frameless -- no saved return address */
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE void
+// OBSOLETE init_extra_frame_info (int fromleaf, struct frame_info *frame)
+// OBSOLETE {
+// OBSOLETE frame->fsr = 0; /* Not yet allocated */
+// OBSOLETE frame->args_pointer = 0; /* Unknown */
+// OBSOLETE frame->locals_pointer = 0; /* Unknown */
+// OBSOLETE }
+// OBSOLETE \f
+// OBSOLETE /* Examine an m88k function prologue, recording the addresses at which
+// OBSOLETE registers are saved explicitly by the prologue code, and returning
+// OBSOLETE the address of the first instruction after the prologue (but not
+// OBSOLETE after the instruction at address LIMIT, as explained below).
+// OBSOLETE
+// OBSOLETE LIMIT places an upper bound on addresses of the instructions to be
+// OBSOLETE examined. If the prologue code scan reaches LIMIT, the scan is
+// OBSOLETE aborted and LIMIT is returned. This is used, when examining the
+// OBSOLETE prologue for the current frame, to keep examine_prologue () from
+// OBSOLETE claiming that a given register has been saved when in fact the
+// OBSOLETE instruction that saves it has not yet been executed. LIMIT is used
+// OBSOLETE at other times to stop the scan when we hit code after the true
+// OBSOLETE function prologue (e.g. for the first source line) which might
+// OBSOLETE otherwise be mistaken for function prologue.
+// OBSOLETE
+// OBSOLETE The format of the function prologue matched by this routine is
+// OBSOLETE derived from examination of the source to gcc 1.95, particularly
+// OBSOLETE the routine output_prologue () in config/out-m88k.c.
+// OBSOLETE
+// OBSOLETE subu r31,r31,n # stack pointer update
+// OBSOLETE
+// OBSOLETE (st rn,r31,offset)? # save incoming regs
+// OBSOLETE (st.d rn,r31,offset)?
+// OBSOLETE
+// OBSOLETE (addu r30,r31,n)? # frame pointer update
+// OBSOLETE
+// OBSOLETE (pic sequence)? # PIC code prologue
+// OBSOLETE
+// OBSOLETE (or rn,rm,0)? # Move parameters to other regs
+// OBSOLETE */
+// OBSOLETE
+// OBSOLETE /* Macros for extracting fields from instructions. */
+// OBSOLETE
+// OBSOLETE #define BITMASK(pos, width) (((0x1 << (width)) - 1) << (pos))
+// OBSOLETE #define EXTRACT_FIELD(val, pos, width) ((val) >> (pos) & BITMASK (0, width))
+// OBSOLETE #define SUBU_OFFSET(x) ((unsigned)(x & 0xFFFF))
+// OBSOLETE #define ST_OFFSET(x) ((unsigned)((x) & 0xFFFF))
+// OBSOLETE #define ST_SRC(x) EXTRACT_FIELD ((x), 21, 5)
+// OBSOLETE #define ADDU_OFFSET(x) ((unsigned)(x & 0xFFFF))
+// OBSOLETE
+// OBSOLETE /*
+// OBSOLETE * prologue_insn_tbl is a table of instructions which may comprise a
+// OBSOLETE * function prologue. Associated with each table entry (corresponding
+// OBSOLETE * to a single instruction or group of instructions), is an action.
+// OBSOLETE * This action is used by examine_prologue (below) to determine
+// OBSOLETE * the state of certain machine registers and where the stack frame lives.
+// OBSOLETE */
+// OBSOLETE
+// OBSOLETE enum prologue_insn_action
+// OBSOLETE {
+// OBSOLETE PIA_SKIP, /* don't care what the instruction does */
+// OBSOLETE PIA_NOTE_ST, /* note register stored and where */
+// OBSOLETE PIA_NOTE_STD, /* note pair of registers stored and where */
+// OBSOLETE PIA_NOTE_SP_ADJUSTMENT, /* note stack pointer adjustment */
+// OBSOLETE PIA_NOTE_FP_ASSIGNMENT, /* note frame pointer assignment */
+// OBSOLETE PIA_NOTE_PROLOGUE_END, /* no more prologue */
+// OBSOLETE };
+// OBSOLETE
+// OBSOLETE struct prologue_insns
+// OBSOLETE {
+// OBSOLETE unsigned long insn;
+// OBSOLETE unsigned long mask;
+// OBSOLETE enum prologue_insn_action action;
+// OBSOLETE };
+// OBSOLETE
+// OBSOLETE struct prologue_insns prologue_insn_tbl[] =
+// OBSOLETE {
+// OBSOLETE /* Various register move instructions */
+// OBSOLETE {0x58000000, 0xf800ffff, PIA_SKIP}, /* or/or.u with immed of 0 */
+// OBSOLETE {0xf4005800, 0xfc1fffe0, PIA_SKIP}, /* or rd, r0, rs */
+// OBSOLETE {0xf4005800, 0xfc00ffff, PIA_SKIP}, /* or rd, rs, r0 */
+// OBSOLETE
+// OBSOLETE /* Stack pointer setup: "subu sp, sp, n" where n is a multiple of 8 */
+// OBSOLETE {0x67ff0000, 0xffff0007, PIA_NOTE_SP_ADJUSTMENT},
+// OBSOLETE
+// OBSOLETE /* Frame pointer assignment: "addu r30, r31, n" */
+// OBSOLETE {0x63df0000, 0xffff0000, PIA_NOTE_FP_ASSIGNMENT},
+// OBSOLETE
+// OBSOLETE /* Store to stack instructions; either "st rx, sp, n" or "st.d rx, sp, n" */
+// OBSOLETE {0x241f0000, 0xfc1f0000, PIA_NOTE_ST}, /* st rx, sp, n */
+// OBSOLETE {0x201f0000, 0xfc1f0000, PIA_NOTE_STD}, /* st.d rs, sp, n */
+// OBSOLETE
+// OBSOLETE /* Instructions needed for setting up r25 for pic code. */
+// OBSOLETE {0x5f200000, 0xffff0000, PIA_SKIP}, /* or.u r25, r0, offset_high */
+// OBSOLETE {0xcc000002, 0xffffffff, PIA_SKIP}, /* bsr.n Lab */
+// OBSOLETE {0x5b390000, 0xffff0000, PIA_SKIP}, /* or r25, r25, offset_low */
+// OBSOLETE {0xf7396001, 0xffffffff, PIA_SKIP}, /* Lab: addu r25, r25, r1 */
+// OBSOLETE
+// OBSOLETE /* Various branch or jump instructions which have a delay slot -- these
+// OBSOLETE do not form part of the prologue, but the instruction in the delay
+// OBSOLETE slot might be a store instruction which should be noted. */
+// OBSOLETE {0xc4000000, 0xe4000000, PIA_NOTE_PROLOGUE_END},
+// OBSOLETE /* br.n, bsr.n, bb0.n, or bb1.n */
+// OBSOLETE {0xec000000, 0xfc000000, PIA_NOTE_PROLOGUE_END}, /* bcnd.n */
+// OBSOLETE {0xf400c400, 0xfffff7e0, PIA_NOTE_PROLOGUE_END} /* jmp.n or jsr.n */
+// OBSOLETE
+// OBSOLETE };
+// OBSOLETE
+// OBSOLETE
+// OBSOLETE /* Fetch the instruction at ADDR, returning 0 if ADDR is beyond LIM or
+// OBSOLETE is not the address of a valid instruction, the address of the next
+// OBSOLETE instruction beyond ADDR otherwise. *PWORD1 receives the first word
+// OBSOLETE of the instruction. */
+// OBSOLETE
+// OBSOLETE #define NEXT_PROLOGUE_INSN(addr, lim, pword1) \
+// OBSOLETE (((addr) < (lim)) ? next_insn (addr, pword1) : 0)
+// OBSOLETE
+// OBSOLETE /* Read the m88k instruction at 'memaddr' and return the address of
+// OBSOLETE the next instruction after that, or 0 if 'memaddr' is not the
+// OBSOLETE address of a valid instruction. The instruction
+// OBSOLETE is stored at 'pword1'. */
+// OBSOLETE
+// OBSOLETE CORE_ADDR
+// OBSOLETE next_insn (CORE_ADDR memaddr, unsigned long *pword1)
+// OBSOLETE {
+// OBSOLETE *pword1 = read_memory_integer (memaddr, BYTES_PER_88K_INSN);
+// OBSOLETE return memaddr + BYTES_PER_88K_INSN;
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Read a register from frames called by us (or from the hardware regs). */
+// OBSOLETE
+// OBSOLETE static int
+// OBSOLETE read_next_frame_reg (struct frame_info *frame, int regno)
+// OBSOLETE {
+// OBSOLETE for (; frame; frame = frame->next)
+// OBSOLETE {
+// OBSOLETE if (regno == SP_REGNUM)
+// OBSOLETE return FRAME_FP (frame);
+// OBSOLETE else if (frame->fsr->regs[regno])
+// OBSOLETE return read_memory_integer (frame->fsr->regs[regno], 4);
+// OBSOLETE }
+// OBSOLETE return read_register (regno);
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Examine the prologue of a function. `ip' points to the first instruction.
+// OBSOLETE `limit' is the limit of the prologue (e.g. the addr of the first
+// OBSOLETE linenumber, or perhaps the program counter if we're stepping through).
+// OBSOLETE `frame_sp' is the stack pointer value in use in this frame.
+// OBSOLETE `fsr' is a pointer to a frame_saved_regs structure into which we put
+// OBSOLETE info about the registers saved by this frame.
+// OBSOLETE `fi' is a struct frame_info pointer; we fill in various fields in it
+// OBSOLETE to reflect the offsets of the arg pointer and the locals pointer. */
+// OBSOLETE
+// OBSOLETE static CORE_ADDR
+// OBSOLETE examine_prologue (register CORE_ADDR ip, register CORE_ADDR limit,
+// OBSOLETE CORE_ADDR frame_sp, struct frame_saved_regs *fsr,
+// OBSOLETE struct frame_info *fi)
+// OBSOLETE {
+// OBSOLETE register CORE_ADDR next_ip;
+// OBSOLETE register int src;
+// OBSOLETE unsigned long insn;
+// OBSOLETE int size, offset;
+// OBSOLETE char must_adjust[32]; /* If set, must adjust offsets in fsr */
+// OBSOLETE int sp_offset = -1; /* -1 means not set (valid must be mult of 8) */
+// OBSOLETE int fp_offset = -1; /* -1 means not set */
+// OBSOLETE CORE_ADDR frame_fp;
+// OBSOLETE CORE_ADDR prologue_end = 0;
+// OBSOLETE
+// OBSOLETE memset (must_adjust, '\0', sizeof (must_adjust));
+// OBSOLETE next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn);
+// OBSOLETE
+// OBSOLETE while (next_ip)
+// OBSOLETE {
+// OBSOLETE struct prologue_insns *pip;
+// OBSOLETE
+// OBSOLETE for (pip = prologue_insn_tbl; (insn & pip->mask) != pip->insn;)
+// OBSOLETE if (++pip >= prologue_insn_tbl + sizeof prologue_insn_tbl)
+// OBSOLETE goto end_of_prologue_found; /* not a prologue insn */
+// OBSOLETE
+// OBSOLETE switch (pip->action)
+// OBSOLETE {
+// OBSOLETE case PIA_NOTE_ST:
+// OBSOLETE case PIA_NOTE_STD:
+// OBSOLETE if (sp_offset != -1)
+// OBSOLETE {
+// OBSOLETE src = ST_SRC (insn);
+// OBSOLETE offset = ST_OFFSET (insn);
+// OBSOLETE must_adjust[src] = 1;
+// OBSOLETE fsr->regs[src++] = offset; /* Will be adjusted later */
+// OBSOLETE if (pip->action == PIA_NOTE_STD && src < 32)
+// OBSOLETE {
+// OBSOLETE offset += 4;
+// OBSOLETE must_adjust[src] = 1;
+// OBSOLETE fsr->regs[src++] = offset;
+// OBSOLETE }
+// OBSOLETE }
+// OBSOLETE else
+// OBSOLETE goto end_of_prologue_found;
+// OBSOLETE break;
+// OBSOLETE case PIA_NOTE_SP_ADJUSTMENT:
+// OBSOLETE if (sp_offset == -1)
+// OBSOLETE sp_offset = -SUBU_OFFSET (insn);
+// OBSOLETE else
+// OBSOLETE goto end_of_prologue_found;
+// OBSOLETE break;
+// OBSOLETE case PIA_NOTE_FP_ASSIGNMENT:
+// OBSOLETE if (fp_offset == -1)
+// OBSOLETE fp_offset = ADDU_OFFSET (insn);
+// OBSOLETE else
+// OBSOLETE goto end_of_prologue_found;
+// OBSOLETE break;
+// OBSOLETE case PIA_NOTE_PROLOGUE_END:
+// OBSOLETE if (!prologue_end)
+// OBSOLETE prologue_end = ip;
+// OBSOLETE break;
+// OBSOLETE case PIA_SKIP:
+// OBSOLETE default:
+// OBSOLETE /* Do nothing */
+// OBSOLETE break;
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE ip = next_ip;
+// OBSOLETE next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn);
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE end_of_prologue_found:
+// OBSOLETE
+// OBSOLETE if (prologue_end)
+// OBSOLETE ip = prologue_end;
+// OBSOLETE
+// OBSOLETE /* We're done with the prologue. If we don't care about the stack
+// OBSOLETE frame itself, just return. (Note that fsr->regs has been trashed,
+// OBSOLETE but the one caller who calls with fi==0 passes a dummy there.) */
+// OBSOLETE
+// OBSOLETE if (fi == 0)
+// OBSOLETE return ip;
+// OBSOLETE
+// OBSOLETE /*
+// OBSOLETE OK, now we have:
+// OBSOLETE
+// OBSOLETE sp_offset original (before any alloca calls) displacement of SP
+// OBSOLETE (will be negative).
+// OBSOLETE
+// OBSOLETE fp_offset displacement from original SP to the FP for this frame
+// OBSOLETE or -1.
+// OBSOLETE
+// OBSOLETE fsr->regs[0..31] displacement from original SP to the stack
+// OBSOLETE location where reg[0..31] is stored.
+// OBSOLETE
+// OBSOLETE must_adjust[0..31] set if corresponding offset was set.
+// OBSOLETE
+// OBSOLETE If alloca has been called between the function prologue and the current
+// OBSOLETE IP, then the current SP (frame_sp) will not be the original SP as set by
+// OBSOLETE the function prologue. If the current SP is not the original SP, then the
+// OBSOLETE compiler will have allocated an FP for this frame, fp_offset will be set,
+// OBSOLETE and we can use it to calculate the original SP.
+// OBSOLETE
+// OBSOLETE Then, we figure out where the arguments and locals are, and relocate the
+// OBSOLETE offsets in fsr->regs to absolute addresses. */
+// OBSOLETE
+// OBSOLETE if (fp_offset != -1)
+// OBSOLETE {
+// OBSOLETE /* We have a frame pointer, so get it, and base our calc's on it. */
+// OBSOLETE frame_fp = (CORE_ADDR) read_next_frame_reg (fi->next, ACTUAL_FP_REGNUM);
+// OBSOLETE frame_sp = frame_fp - fp_offset;
+// OBSOLETE }
+// OBSOLETE else
+// OBSOLETE {
+// OBSOLETE /* We have no frame pointer, therefore frame_sp is still the same value
+// OBSOLETE as set by prologue. But where is the frame itself? */
+// OBSOLETE if (must_adjust[SRP_REGNUM])
+// OBSOLETE {
+// OBSOLETE /* Function header saved SRP (r1), the return address. Frame starts
+// OBSOLETE 4 bytes down from where it was saved. */
+// OBSOLETE frame_fp = frame_sp + fsr->regs[SRP_REGNUM] - 4;
+// OBSOLETE fi->locals_pointer = frame_fp;
+// OBSOLETE }
+// OBSOLETE else
+// OBSOLETE {
+// OBSOLETE /* Function header didn't save SRP (r1), so we are in a leaf fn or
+// OBSOLETE are otherwise confused. */
+// OBSOLETE frame_fp = -1;
+// OBSOLETE }
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* The locals are relative to the FP (whether it exists as an allocated
+// OBSOLETE register, or just as an assumed offset from the SP) */
+// OBSOLETE fi->locals_pointer = frame_fp;
+// OBSOLETE
+// OBSOLETE /* The arguments are just above the SP as it was before we adjusted it
+// OBSOLETE on entry. */
+// OBSOLETE fi->args_pointer = frame_sp - sp_offset;
+// OBSOLETE
+// OBSOLETE /* Now that we know the SP value used by the prologue, we know where
+// OBSOLETE it saved all the registers. */
+// OBSOLETE for (src = 0; src < 32; src++)
+// OBSOLETE if (must_adjust[src])
+// OBSOLETE fsr->regs[src] += frame_sp;
+// OBSOLETE
+// OBSOLETE /* The saved value of the SP is always known. */
+// OBSOLETE /* (we hope...) */
+// OBSOLETE if (fsr->regs[SP_REGNUM] != 0
+// OBSOLETE && fsr->regs[SP_REGNUM] != frame_sp - sp_offset)
+// OBSOLETE fprintf_unfiltered (gdb_stderr, "Bad saved SP value %lx != %lx, offset %x!\n",
+// OBSOLETE fsr->regs[SP_REGNUM],
+// OBSOLETE frame_sp - sp_offset, sp_offset);
+// OBSOLETE
+// OBSOLETE fsr->regs[SP_REGNUM] = frame_sp - sp_offset;
+// OBSOLETE
+// OBSOLETE return (ip);
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Given an ip value corresponding to the start of a function,
+// OBSOLETE return the ip of the first instruction after the function
+// OBSOLETE prologue. */
+// OBSOLETE
+// OBSOLETE CORE_ADDR
+// OBSOLETE m88k_skip_prologue (CORE_ADDR ip)
+// OBSOLETE {
+// OBSOLETE struct frame_saved_regs saved_regs_dummy;
+// OBSOLETE struct symtab_and_line sal;
+// OBSOLETE CORE_ADDR limit;
+// OBSOLETE
+// OBSOLETE sal = find_pc_line (ip, 0);
+// OBSOLETE limit = (sal.end) ? sal.end : 0xffffffff;
+// OBSOLETE
+// OBSOLETE return (examine_prologue (ip, limit, (CORE_ADDR) 0, &saved_regs_dummy,
+// OBSOLETE (struct frame_info *) 0));
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Put here the code to store, into a struct frame_saved_regs,
+// OBSOLETE the addresses of the saved registers of frame described by FRAME_INFO.
+// OBSOLETE This includes special registers such as pc and fp saved in special
+// OBSOLETE ways in the stack frame. sp is even more special:
+// OBSOLETE the address we return for it IS the sp for the next frame.
+// OBSOLETE
+// OBSOLETE We cache the result of doing this in the frame_obstack, since it is
+// OBSOLETE fairly expensive. */
+// OBSOLETE
+// OBSOLETE void
+// OBSOLETE frame_find_saved_regs (struct frame_info *fi, struct frame_saved_regs *fsr)
+// OBSOLETE {
+// OBSOLETE register struct frame_saved_regs *cache_fsr;
+// OBSOLETE CORE_ADDR ip;
+// OBSOLETE struct symtab_and_line sal;
+// OBSOLETE CORE_ADDR limit;
+// OBSOLETE
+// OBSOLETE if (!fi->fsr)
+// OBSOLETE {
+// OBSOLETE cache_fsr = (struct frame_saved_regs *)
+// OBSOLETE frame_obstack_alloc (sizeof (struct frame_saved_regs));
+// OBSOLETE memset (cache_fsr, '\0', sizeof (struct frame_saved_regs));
+// OBSOLETE fi->fsr = cache_fsr;
+// OBSOLETE
+// OBSOLETE /* Find the start and end of the function prologue. If the PC
+// OBSOLETE is in the function prologue, we only consider the part that
+// OBSOLETE has executed already. In the case where the PC is not in
+// OBSOLETE the function prologue, we set limit to two instructions beyond
+// OBSOLETE where the prologue ends in case if any of the prologue instructions
+// OBSOLETE were moved into a delay slot of a branch instruction. */
+// OBSOLETE
+// OBSOLETE ip = get_pc_function_start (fi->pc);
+// OBSOLETE sal = find_pc_line (ip, 0);
+// OBSOLETE limit = (sal.end && sal.end < fi->pc) ? sal.end + 2 * BYTES_PER_88K_INSN
+// OBSOLETE : fi->pc;
+// OBSOLETE
+// OBSOLETE /* This will fill in fields in *fi as well as in cache_fsr. */
+// OBSOLETE #ifdef SIGTRAMP_FRAME_FIXUP
+// OBSOLETE if (fi->signal_handler_caller)
+// OBSOLETE SIGTRAMP_FRAME_FIXUP (fi->frame);
+// OBSOLETE #endif
+// OBSOLETE examine_prologue (ip, limit, fi->frame, cache_fsr, fi);
+// OBSOLETE #ifdef SIGTRAMP_SP_FIXUP
+// OBSOLETE if (fi->signal_handler_caller && fi->fsr->regs[SP_REGNUM])
+// OBSOLETE SIGTRAMP_SP_FIXUP (fi->fsr->regs[SP_REGNUM]);
+// OBSOLETE #endif
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE if (fsr)
+// OBSOLETE *fsr = *fi->fsr;
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Return the address of the locals block for the frame
+// OBSOLETE described by FI. Returns 0 if the address is unknown.
+// OBSOLETE NOTE! Frame locals are referred to by negative offsets from the
+// OBSOLETE argument pointer, so this is the same as frame_args_address(). */
+// OBSOLETE
+// OBSOLETE CORE_ADDR
+// OBSOLETE frame_locals_address (struct frame_info *fi)
+// OBSOLETE {
+// OBSOLETE struct frame_saved_regs fsr;
+// OBSOLETE
+// OBSOLETE if (fi->args_pointer) /* Cached value is likely there. */
+// OBSOLETE return fi->args_pointer;
+// OBSOLETE
+// OBSOLETE /* Nope, generate it. */
+// OBSOLETE
+// OBSOLETE get_frame_saved_regs (fi, &fsr);
+// OBSOLETE
+// OBSOLETE return fi->args_pointer;
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Return the address of the argument block for the frame
+// OBSOLETE described by FI. Returns 0 if the address is unknown. */
+// OBSOLETE
+// OBSOLETE CORE_ADDR
+// OBSOLETE frame_args_address (struct frame_info *fi)
+// OBSOLETE {
+// OBSOLETE struct frame_saved_regs fsr;
+// OBSOLETE
+// OBSOLETE if (fi->args_pointer) /* Cached value is likely there. */
+// OBSOLETE return fi->args_pointer;
+// OBSOLETE
+// OBSOLETE /* Nope, generate it. */
+// OBSOLETE
+// OBSOLETE get_frame_saved_regs (fi, &fsr);
+// OBSOLETE
+// OBSOLETE return fi->args_pointer;
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Return the saved PC from this frame.
+// OBSOLETE
+// OBSOLETE If the frame has a memory copy of SRP_REGNUM, use that. If not,
+// OBSOLETE just use the register SRP_REGNUM itself. */
+// OBSOLETE
+// OBSOLETE CORE_ADDR
+// OBSOLETE frame_saved_pc (struct frame_info *frame)
+// OBSOLETE {
+// OBSOLETE return read_next_frame_reg (frame, SRP_REGNUM);
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE
+// OBSOLETE #define DUMMY_FRAME_SIZE 192
+// OBSOLETE
+// OBSOLETE static void
+// OBSOLETE write_word (CORE_ADDR sp, ULONGEST word)
+// OBSOLETE {
+// OBSOLETE register int len = REGISTER_SIZE;
+// OBSOLETE char buffer[MAX_REGISTER_RAW_SIZE];
+// OBSOLETE
+// OBSOLETE store_unsigned_integer (buffer, len, word);
+// OBSOLETE write_memory (sp, buffer, len);
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE void
+// OBSOLETE m88k_push_dummy_frame (void)
+// OBSOLETE {
+// OBSOLETE register CORE_ADDR sp = read_register (SP_REGNUM);
+// OBSOLETE register int rn;
+// OBSOLETE int offset;
+// OBSOLETE
+// OBSOLETE sp -= DUMMY_FRAME_SIZE; /* allocate a bunch of space */
+// OBSOLETE
+// OBSOLETE for (rn = 0, offset = 0; rn <= SP_REGNUM; rn++, offset += 4)
+// OBSOLETE write_word (sp + offset, read_register (rn));
+// OBSOLETE
+// OBSOLETE write_word (sp + offset, read_register (SXIP_REGNUM));
+// OBSOLETE offset += 4;
+// OBSOLETE
+// OBSOLETE write_word (sp + offset, read_register (SNIP_REGNUM));
+// OBSOLETE offset += 4;
+// OBSOLETE
+// OBSOLETE write_word (sp + offset, read_register (SFIP_REGNUM));
+// OBSOLETE offset += 4;
+// OBSOLETE
+// OBSOLETE write_word (sp + offset, read_register (PSR_REGNUM));
+// OBSOLETE offset += 4;
+// OBSOLETE
+// OBSOLETE write_word (sp + offset, read_register (FPSR_REGNUM));
+// OBSOLETE offset += 4;
+// OBSOLETE
+// OBSOLETE write_word (sp + offset, read_register (FPCR_REGNUM));
+// OBSOLETE offset += 4;
+// OBSOLETE
+// OBSOLETE write_register (SP_REGNUM, sp);
+// OBSOLETE write_register (ACTUAL_FP_REGNUM, sp);
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE void
+// OBSOLETE pop_frame (void)
+// OBSOLETE {
+// OBSOLETE register struct frame_info *frame = get_current_frame ();
+// OBSOLETE register int regnum;
+// OBSOLETE struct frame_saved_regs fsr;
+// OBSOLETE
+// OBSOLETE get_frame_saved_regs (frame, &fsr);
+// OBSOLETE
+// OBSOLETE if (PC_IN_CALL_DUMMY (read_pc (), read_register (SP_REGNUM), frame->frame))
+// OBSOLETE {
+// OBSOLETE /* FIXME: I think get_frame_saved_regs should be handling this so
+// OBSOLETE that we can deal with the saved registers properly (e.g. frame
+// OBSOLETE 1 is a call dummy, the user types "frame 2" and then "print $ps"). */
+// OBSOLETE register CORE_ADDR sp = read_register (ACTUAL_FP_REGNUM);
+// OBSOLETE int offset;
+// OBSOLETE
+// OBSOLETE for (regnum = 0, offset = 0; regnum <= SP_REGNUM; regnum++, offset += 4)
+// OBSOLETE (void) write_register (regnum, read_memory_integer (sp + offset, 4));
+// OBSOLETE
+// OBSOLETE write_register (SXIP_REGNUM, read_memory_integer (sp + offset, 4));
+// OBSOLETE offset += 4;
+// OBSOLETE
+// OBSOLETE write_register (SNIP_REGNUM, read_memory_integer (sp + offset, 4));
+// OBSOLETE offset += 4;
+// OBSOLETE
+// OBSOLETE write_register (SFIP_REGNUM, read_memory_integer (sp + offset, 4));
+// OBSOLETE offset += 4;
+// OBSOLETE
+// OBSOLETE write_register (PSR_REGNUM, read_memory_integer (sp + offset, 4));
+// OBSOLETE offset += 4;
+// OBSOLETE
+// OBSOLETE write_register (FPSR_REGNUM, read_memory_integer (sp + offset, 4));
+// OBSOLETE offset += 4;
+// OBSOLETE
+// OBSOLETE write_register (FPCR_REGNUM, read_memory_integer (sp + offset, 4));
+// OBSOLETE offset += 4;
+// OBSOLETE
+// OBSOLETE }
+// OBSOLETE else
+// OBSOLETE {
+// OBSOLETE for (regnum = FP_REGNUM; regnum > 0; regnum--)
+// OBSOLETE if (fsr.regs[regnum])
+// OBSOLETE write_register (regnum,
+// OBSOLETE read_memory_integer (fsr.regs[regnum], 4));
+// OBSOLETE write_pc (frame_saved_pc (frame));
+// OBSOLETE }
+// OBSOLETE reinit_frame_cache ();
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE void
+// OBSOLETE _initialize_m88k_tdep (void)
+// OBSOLETE {
+// OBSOLETE tm_print_insn = print_insn_m88k;
+// OBSOLETE }
projects / deliverable / binutils-gdb.git / blobdiff