/* MI Command Set - stack commands.
- Copyright (C) 2000, 2002, 2003, 2004, 2005, 2007, 2008, 2009, 2010, 2011
- Free Software Foundation, Inc.
+ Copyright (C) 2000-2013 Free Software Foundation, Inc.
Contributed by Cygnus Solutions (a Red Hat company).
This file is part of GDB.
#include "language.h"
#include "valprint.h"
#include "exceptions.h"
+#include "utils.h"
+#include "mi-getopt.h"
+#include "python/python.h"
+#include <ctype.h>
+#include "mi-parse.h"
enum what_to_list { locals, arguments, all };
static void list_args_or_locals (enum what_to_list what,
- int values, struct frame_info *fi);
+ enum print_values values,
+ struct frame_info *fi);
-/* Print a list of the stack frames. Args can be none, in which case
+/* True if we want to allow Python-based frame filters. */
+static int frame_filters = 0;
+
+void
+mi_cmd_enable_frame_filters (char *command, char **argv, int argc)
+{
+ if (argc != 0)
+ error (_("-enable-frame-filters: no arguments allowed"));
+ frame_filters = 1;
+}
+
+/* Parse the --no-frame-filters option in commands where we cannot use
+ mi_getopt. */
+static int
+parse_no_frames_option (const char *arg)
+{
+ if (arg && (strcmp (arg, "--no-frame-filters") == 0))
+ return 1;
+
+ return 0;
+}
+
+/* Print a list of the stack frames. Args can be none, in which case
we want to print the whole backtrace, or a pair of numbers
specifying the frame numbers at which to start and stop the
- display. If the two numbers are equal, a single frame will be
- displayed. */
+ display. If the two numbers are equal, a single frame will be
+ displayed. */
+
void
mi_cmd_stack_list_frames (char *command, char **argv, int argc)
{
int i;
struct cleanup *cleanup_stack;
struct frame_info *fi;
+ enum py_bt_status result = PY_BT_ERROR;
+ int raw_arg = 0;
+ int oind = 0;
+ enum opt
+ {
+ NO_FRAME_FILTERS
+ };
+ static const struct mi_opt opts[] =
+ {
+ {"-no-frame-filters", NO_FRAME_FILTERS, 0},
+ { 0, 0, 0 }
+ };
+
+ /* Parse arguments. In this instance we are just looking for
+ --no-frame-filters. */
+ while (1)
+ {
+ char *oarg;
+ int opt = mi_getopt ("-stack-list-frames", argc, argv,
+ opts, &oind, &oarg);
+ if (opt < 0)
+ break;
+ switch ((enum opt) opt)
+ {
+ case NO_FRAME_FILTERS:
+ raw_arg = oind;
+ break;
+ }
+ }
- if (argc > 2 || argc == 1)
- error (_("mi_cmd_stack_list_frames: Usage: [FRAME_LOW FRAME_HIGH]"));
+ /* After the last option is parsed, there should either be low -
+ high range, or no further arguments. */
+ if ((argc - oind != 0) && (argc - oind != 2))
+ error (_("-stack-list-frames: Usage: [--no-frame-filters] [FRAME_LOW FRAME_HIGH]"));
- if (argc == 2)
+ /* If there is a range, set it. */
+ if (argc - oind == 2)
{
- frame_low = atoi (argv[0]);
- frame_high = atoi (argv[1]);
+ frame_low = atoi (argv[0 + oind]);
+ frame_high = atoi (argv[1 + oind]);
}
else
{
/* Called with no arguments, it means we want the whole
- backtrace. */
+ backtrace. */
frame_low = -1;
frame_high = -1;
}
/* Let's position fi on the frame at which to start the
display. Could be the innermost frame if the whole stack needs
- displaying, or if frame_low is 0. */
+ displaying, or if frame_low is 0. */
for (i = 0, fi = get_current_frame ();
fi && i < frame_low;
i++, fi = get_prev_frame (fi));
if (fi == NULL)
- error (_("mi_cmd_stack_list_frames: Not enough frames in stack."));
+ error (_("-stack-list-frames: Not enough frames in stack."));
- cleanup_stack = make_cleanup_ui_out_list_begin_end (uiout, "stack");
+ cleanup_stack = make_cleanup_ui_out_list_begin_end (current_uiout, "stack");
- /* Now let;s print the frames up to frame_high, or until there are
- frames in the stack. */
- for (;
- fi && (i <= frame_high || frame_high == -1);
- i++, fi = get_prev_frame (fi))
+ if (! raw_arg && frame_filters)
{
- QUIT;
- /* Print the location and the address always, even for level 0.
- args == 0: don't print the arguments. */
- print_frame_info (fi, 1, LOC_AND_ADDRESS, 0 /* args */ );
+ int flags = PRINT_LEVEL | PRINT_FRAME_INFO;
+ int py_frame_low = frame_low;
+
+ /* We cannot pass -1 to frame_low, as that would signify a
+ relative backtrace from the tail of the stack. So, in the case
+ of frame_low == -1, assign and increment it. */
+ if (py_frame_low == -1)
+ py_frame_low++;
+
+ result = apply_frame_filter (get_current_frame (), flags,
+ NO_VALUES, current_uiout,
+ py_frame_low, frame_high);
+ }
+
+ /* Run the inbuilt backtrace if there are no filters registered, or
+ if "--no-frame-filters" has been specified from the command. */
+ if (! frame_filters || raw_arg || result == PY_BT_NO_FILTERS)
+ {
+ /* Now let's print the frames up to frame_high, or until there are
+ frames in the stack. */
+ for (;
+ fi && (i <= frame_high || frame_high == -1);
+ i++, fi = get_prev_frame (fi))
+ {
+ QUIT;
+ /* Print the location and the address always, even for level 0.
+ If args is 0, don't print the arguments. */
+ print_frame_info (fi, 1, LOC_AND_ADDRESS, 0 /* args */ );
+ }
}
do_cleanups (cleanup_stack);
struct frame_info *fi;
if (argc > 1)
- error (_("mi_cmd_stack_info_depth: Usage: [MAX_DEPTH]"));
+ error (_("-stack-info-depth: Usage: [MAX_DEPTH]"));
if (argc == 1)
frame_high = atoi (argv[0]);
else
/* Called with no arguments, it means we want the real depth of
- the stack. */
+ the stack. */
frame_high = -1;
for (i = 0, fi = get_current_frame ();
i++, fi = get_prev_frame (fi))
QUIT;
- ui_out_field_int (uiout, "depth", i);
-}
-
-static enum print_values
-parse_print_values (char *name)
-{
- if (strcmp (name, "0") == 0
- || strcmp (name, mi_no_values) == 0)
- return PRINT_NO_VALUES;
- else if (strcmp (name, "1") == 0
- || strcmp (name, mi_all_values) == 0)
- return PRINT_ALL_VALUES;
- else if (strcmp (name, "2") == 0
- || strcmp (name, mi_simple_values) == 0)
- return PRINT_SIMPLE_VALUES;
- else
- error (_("Unknown value for PRINT_VALUES: must be: \
-0 or \"%s\", 1 or \"%s\", 2 or \"%s\""),
- mi_no_values, mi_all_values, mi_simple_values);
+ ui_out_field_int (current_uiout, "depth", i);
}
/* Print a list of the locals for the current frame. With argument of
0, print only the names, with argument of 1 print also the
- values. */
+ values. */
+
void
mi_cmd_stack_list_locals (char *command, char **argv, int argc)
{
struct frame_info *frame;
+ int raw_arg = 0;
+ enum py_bt_status result = PY_BT_ERROR;
+ int print_value;
- if (argc != 1)
- error (_("mi_cmd_stack_list_locals: Usage: PRINT_VALUES"));
+ if (argc > 0)
+ raw_arg = parse_no_frames_option (argv[0]);
- frame = get_selected_frame (NULL);
+ if (argc < 1 || argc > 2 || (argc == 2 && ! raw_arg)
+ || (argc == 1 && raw_arg))
+ error (_("-stack-list-locals: Usage: [--no-frame-filters] PRINT_VALUES"));
- list_args_or_locals (locals, parse_print_values (argv[0]), frame);
+ frame = get_selected_frame (NULL);
+ print_value = mi_parse_print_values (argv[raw_arg]);
+
+ if (! raw_arg && frame_filters)
+ {
+ int flags = PRINT_LEVEL | PRINT_LOCALS;
+
+ result = apply_frame_filter (frame, flags, print_value,
+ current_uiout, 0, 0);
+ }
+
+ /* Run the inbuilt backtrace if there are no filters registered, or
+ if "--no-frame-filters" has been specified from the command. */
+ if (! frame_filters || raw_arg || result == PY_BT_NO_FILTERS)
+ {
+ list_args_or_locals (locals, print_value, frame);
+ }
}
/* Print a list of the arguments for the current frame. With argument
of 0, print only the names, with argument of 1 print also the
- values. */
+ values. */
+
void
mi_cmd_stack_list_args (char *command, char **argv, int argc)
{
struct frame_info *fi;
struct cleanup *cleanup_stack_args;
enum print_values print_values;
+ struct ui_out *uiout = current_uiout;
+ int raw_arg = 0;
+ enum py_bt_status result = PY_BT_ERROR;
- if (argc < 1 || argc > 3 || argc == 2)
- error (_("mi_cmd_stack_list_args: Usage: "
- "PRINT_VALUES [FRAME_LOW FRAME_HIGH]"));
+ if (argc > 0)
+ raw_arg = parse_no_frames_option (argv[0]);
+
+ if (argc < 1 || (argc > 3 && ! raw_arg) || (argc == 2 && ! raw_arg))
+ error (_("-stack-list-arguments: Usage: " \
+ "[--no-frame-filters] PRINT_VALUES [FRAME_LOW FRAME_HIGH]"));
- if (argc == 3)
+ if (argc >= 3)
{
- frame_low = atoi (argv[1]);
- frame_high = atoi (argv[2]);
+ frame_low = atoi (argv[1 + raw_arg]);
+ frame_high = atoi (argv[2 + raw_arg]);
}
else
{
/* Called with no arguments, it means we want args for the whole
- backtrace. */
+ backtrace. */
frame_low = -1;
frame_high = -1;
}
- print_values = parse_print_values (argv[0]);
+ print_values = mi_parse_print_values (argv[raw_arg]);
/* Let's position fi on the frame at which to start the
display. Could be the innermost frame if the whole stack needs
- displaying, or if frame_low is 0. */
+ displaying, or if frame_low is 0. */
for (i = 0, fi = get_current_frame ();
fi && i < frame_low;
i++, fi = get_prev_frame (fi));
if (fi == NULL)
- error (_("mi_cmd_stack_list_args: Not enough frames in stack."));
+ error (_("-stack-list-arguments: Not enough frames in stack."));
cleanup_stack_args
= make_cleanup_ui_out_list_begin_end (uiout, "stack-args");
- /* Now let's print the frames up to frame_high, or until there are
- frames in the stack. */
- for (;
- fi && (i <= frame_high || frame_high == -1);
- i++, fi = get_prev_frame (fi))
+ if (! raw_arg && frame_filters)
{
- struct cleanup *cleanup_frame;
-
- QUIT;
- cleanup_frame = make_cleanup_ui_out_tuple_begin_end (uiout, "frame");
- ui_out_field_int (uiout, "level", i);
- list_args_or_locals (arguments, print_values, fi);
- do_cleanups (cleanup_frame);
+ int flags = PRINT_LEVEL | PRINT_ARGS;
+ int py_frame_low = frame_low;
+
+ /* We cannot pass -1 to frame_low, as that would signify a
+ relative backtrace from the tail of the stack. So, in the case
+ of frame_low == -1, assign and increment it. */
+ if (py_frame_low == -1)
+ py_frame_low++;
+
+ result = apply_frame_filter (get_current_frame (), flags,
+ print_values, current_uiout,
+ py_frame_low, frame_high);
}
+ /* Run the inbuilt backtrace if there are no filters registered, or
+ if "--no-frame-filters" has been specified from the command. */
+ if (! frame_filters || raw_arg || result == PY_BT_NO_FILTERS)
+ {
+ /* Now let's print the frames up to frame_high, or until there are
+ frames in the stack. */
+ for (;
+ fi && (i <= frame_high || frame_high == -1);
+ i++, fi = get_prev_frame (fi))
+ {
+ struct cleanup *cleanup_frame;
+
+ QUIT;
+ cleanup_frame = make_cleanup_ui_out_tuple_begin_end (uiout, "frame");
+ ui_out_field_int (uiout, "level", i);
+ list_args_or_locals (arguments, print_values, fi);
+ do_cleanups (cleanup_frame);
+ }
+ }
do_cleanups (cleanup_stack_args);
}
current frame. ARGC must be 1 and ARGV[0] specify if only the names,
or both names and values of the variables must be printed. See
parse_print_value for possible values. */
+
void
mi_cmd_stack_list_variables (char *command, char **argv, int argc)
{
struct frame_info *frame;
+ int raw_arg = 0;
+ enum py_bt_status result = PY_BT_ERROR;
+ int print_value;
- if (argc != 1)
- error (_("Usage: PRINT_VALUES"));
+ if (argc > 0)
+ raw_arg = parse_no_frames_option (argv[0]);
- frame = get_selected_frame (NULL);
+ if (argc < 1 || argc > 2 || (argc == 2 && ! raw_arg)
+ || (argc == 1 && raw_arg))
+ error (_("-stack-list-variables: Usage: " \
+ "[--no-frame-filters] PRINT_VALUES"));
- list_args_or_locals (all, parse_print_values (argv[0]), frame);
+ frame = get_selected_frame (NULL);
+ print_value = mi_parse_print_values (argv[raw_arg]);
+
+ if (! raw_arg && frame_filters)
+ {
+ int flags = PRINT_LEVEL | PRINT_ARGS | PRINT_LOCALS;
+
+ result = apply_frame_filter (frame, flags, print_value,
+ current_uiout, 0, 0);
+ }
+
+ /* Run the inbuilt backtrace if there are no filters registered, or
+ if "--no-frame-filters" has been specified from the command. */
+ if (! frame_filters || raw_arg || result == PY_BT_NO_FILTERS)
+ {
+ list_args_or_locals (all, print_value, frame);
+ }
}
+/* Print single local or argument. ARG must be already read in. For
+ WHAT and VALUES see list_args_or_locals.
+
+ Errors are printed as if they would be the parameter value. Use
+ zeroed ARG iff it should not be printed according to VALUES. */
+
+static void
+list_arg_or_local (const struct frame_arg *arg, enum what_to_list what,
+ enum print_values values)
+{
+ struct cleanup *old_chain;
+ struct ui_out *uiout = current_uiout;
+ struct ui_file *stb;
+
+ stb = mem_fileopen ();
+ old_chain = make_cleanup_ui_file_delete (stb);
+
+ gdb_assert (!arg->val || !arg->error);
+ gdb_assert ((values == PRINT_NO_VALUES && arg->val == NULL
+ && arg->error == NULL)
+ || values == PRINT_SIMPLE_VALUES
+ || (values == PRINT_ALL_VALUES
+ && (arg->val != NULL || arg->error != NULL)));
+ gdb_assert (arg->entry_kind == print_entry_values_no
+ || (arg->entry_kind == print_entry_values_only
+ && (arg->val || arg->error)));
+
+ if (values != PRINT_NO_VALUES || what == all)
+ make_cleanup_ui_out_tuple_begin_end (uiout, NULL);
+
+ fputs_filtered (SYMBOL_PRINT_NAME (arg->sym), stb);
+ if (arg->entry_kind == print_entry_values_only)
+ fputs_filtered ("@entry", stb);
+ ui_out_field_stream (uiout, "name", stb);
+
+ if (what == all && SYMBOL_IS_ARGUMENT (arg->sym))
+ ui_out_field_int (uiout, "arg", 1);
+
+ if (values == PRINT_SIMPLE_VALUES)
+ {
+ check_typedef (arg->sym->type);
+ type_print (arg->sym->type, "", stb, -1);
+ ui_out_field_stream (uiout, "type", stb);
+ }
+
+ if (arg->val || arg->error)
+ {
+ volatile struct gdb_exception except;
+
+ if (arg->error)
+ except.message = arg->error;
+ else
+ {
+ /* TRY_CATCH has two statements, wrap it in a block. */
+
+ TRY_CATCH (except, RETURN_MASK_ERROR)
+ {
+ struct value_print_options opts;
+
+ get_no_prettyformat_print_options (&opts);
+ opts.deref_ref = 1;
+ common_val_print (arg->val, stb, 0, &opts,
+ language_def (SYMBOL_LANGUAGE (arg->sym)));
+ }
+ }
+ if (except.message)
+ fprintf_filtered (stb, _("<error reading variable: %s>"),
+ except.message);
+ ui_out_field_stream (uiout, "value", stb);
+ }
+
+ do_cleanups (old_chain);
+}
/* Print a list of the locals or the arguments for the currently
selected frame. If the argument passed is 0, printonly the names
of the variables, if an argument of 1 is passed, print the values
- as well. */
+ as well. */
+
static void
-list_args_or_locals (enum what_to_list what, int values, struct frame_info *fi)
+list_args_or_locals (enum what_to_list what, enum print_values values,
+ struct frame_info *fi)
{
struct block *block;
struct symbol *sym;
- struct dict_iterator iter;
+ struct block_iterator iter;
struct cleanup *cleanup_list;
- static struct ui_stream *stb = NULL;
struct type *type;
char *name_of_result;
-
- stb = ui_out_stream_new (uiout);
+ struct ui_out *uiout = current_uiout;
block = get_frame_block (fi, 0);
}
if (print_me)
{
- struct cleanup *cleanup_tuple = NULL;
struct symbol *sym2;
- struct value *val;
-
- if (values != PRINT_NO_VALUES || what == all)
- cleanup_tuple =
- make_cleanup_ui_out_tuple_begin_end (uiout, NULL);
- ui_out_field_string (uiout, "name", SYMBOL_PRINT_NAME (sym));
- if (what == all && SYMBOL_IS_ARGUMENT (sym))
- ui_out_field_int (uiout, "arg", 1);
+ struct frame_arg arg, entryarg;
if (SYMBOL_IS_ARGUMENT (sym))
- sym2 = lookup_symbol (SYMBOL_NATURAL_NAME (sym),
+ sym2 = lookup_symbol (SYMBOL_LINKAGE_NAME (sym),
block, VAR_DOMAIN,
- (int *) NULL);
+ NULL);
else
sym2 = sym;
+ gdb_assert (sym2 != NULL);
+
+ memset (&arg, 0, sizeof (arg));
+ arg.sym = sym2;
+ arg.entry_kind = print_entry_values_no;
+ memset (&entryarg, 0, sizeof (entryarg));
+ entryarg.sym = sym2;
+ entryarg.entry_kind = print_entry_values_no;
+
switch (values)
{
case PRINT_SIMPLE_VALUES:
type = check_typedef (sym2->type);
- type_print (sym2->type, "", stb->stream, -1);
- ui_out_field_stream (uiout, "type", stb);
if (TYPE_CODE (type) != TYPE_CODE_ARRAY
&& TYPE_CODE (type) != TYPE_CODE_STRUCT
&& TYPE_CODE (type) != TYPE_CODE_UNION)
{
- volatile struct gdb_exception except;
-
- TRY_CATCH (except, RETURN_MASK_ERROR)
- {
- struct value_print_options opts;
-
- val = read_var_value (sym2, fi);
- get_raw_print_options (&opts);
- opts.deref_ref = 1;
- common_val_print
- (val, stb->stream, 0, &opts,
- language_def (SYMBOL_LANGUAGE (sym2)));
- }
- if (except.reason < 0)
- fprintf_filtered (stb->stream,
- _("<error reading variable: %s>"),
- except.message);
-
- ui_out_field_stream (uiout, "value", stb);
- }
- break;
case PRINT_ALL_VALUES:
- {
- volatile struct gdb_exception except;
-
- TRY_CATCH (except, RETURN_MASK_ERROR)
- {
- struct value_print_options opts;
-
- val = read_var_value (sym2, fi);
- get_raw_print_options (&opts);
- opts.deref_ref = 1;
- common_val_print
- (val, stb->stream, 0, &opts,
- language_def (SYMBOL_LANGUAGE (sym2)));
- }
- if (except.reason < 0)
- fprintf_filtered (stb->stream,
- _("<error reading variable: %s>"),
- except.message);
-
- ui_out_field_stream (uiout, "value", stb);
- }
+ read_frame_arg (sym2, fi, &arg, &entryarg);
+ }
break;
}
- if (values != PRINT_NO_VALUES || what == all)
- do_cleanups (cleanup_tuple);
+ if (arg.entry_kind != print_entry_values_only)
+ list_arg_or_local (&arg, what, values);
+ if (entryarg.entry_kind != print_entry_values_no)
+ list_arg_or_local (&entryarg, what, values);
+ xfree (arg.error);
+ xfree (entryarg.error);
}
}
+
if (BLOCK_FUNCTION (block))
break;
else
block = BLOCK_SUPERBLOCK (block);
}
do_cleanups (cleanup_list);
- ui_out_stream_delete (stb);
}
void
mi_cmd_stack_select_frame (char *command, char **argv, int argc)
{
if (argc == 0 || argc > 1)
- error (_("mi_cmd_stack_select_frame: Usage: FRAME_SPEC"));
+ error (_("-stack-select-frame: Usage: FRAME_SPEC"));
select_frame_command (argv[0], 1 /* not used */ );
}
mi_cmd_stack_info_frame (char *command, char **argv, int argc)
{
if (argc > 0)
- error (_("mi_cmd_stack_info_frame: No arguments required"));
+ error (_("-stack-info-frame: No arguments allowed"));
print_frame_info (get_selected_frame (NULL), 1, LOC_AND_ADDRESS, 0);
}
projects / deliverable / binutils-gdb.git / blobdiff