/* Target-dependent code for the MIPS architecture, for GDB, the GNU Debugger.
- Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996
- Free Software Foundation, Inc.
+
+ Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
+ 1997, 1998, 1999, 2000, Free Software Foundation, Inc.
+
Contributed by Alessandro Forin(af@cs.cmu.edu) at CMU
and by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin.
-This file is part of GDB.
+ This file is part of GDB.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
#include "defs.h"
#include "gdb_string.h"
#include "objfiles.h"
#include "gdbtypes.h"
#include "target.h"
+#include "arch-utils.h"
#include "opcode/mips.h"
+#include "elf/mips.h"
+#include "elf-bfd.h"
+#include "symcat.h"
-#define VM_MIN_ADDRESS (CORE_ADDR)0x400000
+/* The sizes of floating point registers. */
+
+enum
+{
+ MIPS_FPU_SINGLE_REGSIZE = 4,
+ MIPS_FPU_DOUBLE_REGSIZE = 8
+};
-/* FIXME: Put this declaration in frame.h. */
-extern struct obstack frame_cache_obstack;
+/* All the possible MIPS ABIs. */
-#if 0
-static int mips_in_lenient_prologue PARAMS ((CORE_ADDR, CORE_ADDR));
+enum mips_abi
+ {
+ MIPS_ABI_UNKNOWN,
+ MIPS_ABI_N32,
+ MIPS_ABI_O32,
+ MIPS_ABI_O64,
+ MIPS_ABI_EABI32,
+ MIPS_ABI_EABI64
+ };
+
+struct frame_extra_info
+ {
+ mips_extra_func_info_t proc_desc;
+ int num_args;
+ };
+
+/* Various MIPS ISA options (related to stack analysis) can be
+ overridden dynamically. Establish an enum/array for managing
+ them. */
+
+static const char size_auto[] = "auto";
+static const char size_32[] = "32";
+static const char size_64[] = "64";
+
+static const char *size_enums[] = {
+ size_auto,
+ size_32,
+ size_64,
+ 0
+};
+
+/* Some MIPS boards don't support floating point while others only
+ support single-precision floating-point operations. See also
+ FP_REGISTER_DOUBLE. */
+
+enum mips_fpu_type
+ {
+ MIPS_FPU_DOUBLE, /* Full double precision floating point. */
+ MIPS_FPU_SINGLE, /* Single precision floating point (R4650). */
+ MIPS_FPU_NONE /* No floating point. */
+ };
+
+#ifndef MIPS_DEFAULT_FPU_TYPE
+#define MIPS_DEFAULT_FPU_TYPE MIPS_FPU_DOUBLE
#endif
+static int mips_fpu_type_auto = 1;
+static enum mips_fpu_type mips_fpu_type = MIPS_DEFAULT_FPU_TYPE;
+#define MIPS_FPU_TYPE mips_fpu_type
-static int gdb_print_insn_mips PARAMS ((bfd_vma, disassemble_info *));
+/* Do not use "TARGET_IS_MIPS64" to test the size of floating point registers */
+#ifndef FP_REGISTER_DOUBLE
+#define FP_REGISTER_DOUBLE (REGISTER_VIRTUAL_SIZE(FP0_REGNUM) == 8)
+#endif
-static void mips_print_register PARAMS ((int, int));
+static int mips_debug = 0;
+
+/* MIPS specific per-architecture information */
+struct gdbarch_tdep
+ {
+ /* from the elf header */
+ int elf_flags;
+ /* mips options */
+ enum mips_abi mips_abi;
+ enum mips_fpu_type mips_fpu_type;
+ int mips_last_arg_regnum;
+ int mips_last_fp_arg_regnum;
+ int mips_default_saved_regsize;
+ int mips_fp_register_double;
+ int mips_regs_have_home_p;
+ int mips_default_stack_argsize;
+ int gdb_target_is_mips64;
+ };
+
+#if GDB_MULTI_ARCH
+#undef MIPS_EABI
+#define MIPS_EABI (gdbarch_tdep (current_gdbarch)->mips_abi == MIPS_ABI_EABI32 \
+ || gdbarch_tdep (current_gdbarch)->mips_abi == MIPS_ABI_EABI64)
+#endif
-static mips_extra_func_info_t
-heuristic_proc_desc PARAMS ((CORE_ADDR, CORE_ADDR, struct frame_info *));
+#if GDB_MULTI_ARCH
+#undef MIPS_LAST_FP_ARG_REGNUM
+#define MIPS_LAST_FP_ARG_REGNUM (gdbarch_tdep (current_gdbarch)->mips_last_fp_arg_regnum)
+#endif
+
+#if GDB_MULTI_ARCH
+#undef MIPS_LAST_ARG_REGNUM
+#define MIPS_LAST_ARG_REGNUM (gdbarch_tdep (current_gdbarch)->mips_last_arg_regnum)
+#endif
+
+#if GDB_MULTI_ARCH
+#undef MIPS_FPU_TYPE
+#define MIPS_FPU_TYPE (gdbarch_tdep (current_gdbarch)->mips_fpu_type)
+#endif
+
+/* Return the currently configured (or set) saved register size. */
+
+#if GDB_MULTI_ARCH
+#undef MIPS_DEFAULT_SAVED_REGSIZE
+#define MIPS_DEFAULT_SAVED_REGSIZE (gdbarch_tdep (current_gdbarch)->mips_default_saved_regsize)
+#elif !defined (MIPS_DEFAULT_SAVED_REGSIZE)
+#define MIPS_DEFAULT_SAVED_REGSIZE MIPS_REGSIZE
+#endif
+
+static const char *mips_saved_regsize_string = size_auto;
+
+#define MIPS_SAVED_REGSIZE (mips_saved_regsize())
+
+static unsigned int
+mips_saved_regsize ()
+{
+ if (mips_saved_regsize_string == size_auto)
+ return MIPS_DEFAULT_SAVED_REGSIZE;
+ else if (mips_saved_regsize_string == size_64)
+ return 8;
+ else /* if (mips_saved_regsize_string == size_32) */
+ return 4;
+}
+
+/* Indicate that the ABI makes use of double-precision registers
+ provided by the FPU (rather than combining pairs of registers to
+ form double-precision values). Do not use "TARGET_IS_MIPS64" to
+ determine if the ABI is using double-precision registers. See also
+ MIPS_FPU_TYPE. */
+#if GDB_MULTI_ARCH
+#undef FP_REGISTER_DOUBLE
+#define FP_REGISTER_DOUBLE (gdbarch_tdep (current_gdbarch)->mips_fp_register_double)
+#endif
+
+/* Does the caller allocate a ``home'' for each register used in the
+ function call? The N32 ABI and MIPS_EABI do not, the others do. */
-static CORE_ADDR heuristic_proc_start PARAMS ((CORE_ADDR));
+#if GDB_MULTI_ARCH
+#undef MIPS_REGS_HAVE_HOME_P
+#define MIPS_REGS_HAVE_HOME_P (gdbarch_tdep (current_gdbarch)->mips_regs_have_home_p)
+#elif !defined (MIPS_REGS_HAVE_HOME_P)
+#define MIPS_REGS_HAVE_HOME_P (!MIPS_EABI)
+#endif
+
+/* The amount of space reserved on the stack for registers. This is
+ different to MIPS_SAVED_REGSIZE as it determines the alignment of
+ data allocated after the registers have run out. */
+
+#if GDB_MULTI_ARCH
+#undef MIPS_DEFAULT_STACK_ARGSIZE
+#define MIPS_DEFAULT_STACK_ARGSIZE (gdbarch_tdep (current_gdbarch)->mips_default_stack_argsize)
+#elif !defined (MIPS_DEFAULT_STACK_ARGSIZE)
+#define MIPS_DEFAULT_STACK_ARGSIZE (MIPS_DEFAULT_SAVED_REGSIZE)
+#endif
+
+#define MIPS_STACK_ARGSIZE (mips_stack_argsize ())
+
+static const char *mips_stack_argsize_string = size_auto;
+
+static unsigned int
+mips_stack_argsize (void)
+{
+ if (mips_stack_argsize_string == size_auto)
+ return MIPS_DEFAULT_STACK_ARGSIZE;
+ else if (mips_stack_argsize_string == size_64)
+ return 8;
+ else /* if (mips_stack_argsize_string == size_32) */
+ return 4;
+}
+
+#if GDB_MULTI_ARCH
+#undef GDB_TARGET_IS_MIPS64
+#define GDB_TARGET_IS_MIPS64 (gdbarch_tdep (current_gdbarch)->gdb_target_is_mips64 + 0)
+#endif
+
+#define VM_MIN_ADDRESS (CORE_ADDR)0x400000
+
+#if 0
+static int mips_in_lenient_prologue (CORE_ADDR, CORE_ADDR);
+#endif
-static CORE_ADDR read_next_frame_reg PARAMS ((struct frame_info *, int));
+int gdb_print_insn_mips (bfd_vma, disassemble_info *);
-static void mips_set_fpu_command PARAMS ((char *, int,
- struct cmd_list_element *));
+static void mips_print_register (int, int);
-static void mips_show_fpu_command PARAMS ((char *, int,
- struct cmd_list_element *));
+static mips_extra_func_info_t
+heuristic_proc_desc (CORE_ADDR, CORE_ADDR, struct frame_info *);
+
+static CORE_ADDR heuristic_proc_start (CORE_ADDR);
-void mips_set_processor_type_command PARAMS ((char *, int));
+static CORE_ADDR read_next_frame_reg (struct frame_info *, int);
-int mips_set_processor_type PARAMS ((char *));
+int mips_set_processor_type (char *);
-static void mips_show_processor_type_command PARAMS ((char *, int));
+static void mips_show_processor_type_command (char *, int);
-static void reinit_frame_cache_sfunc PARAMS ((char *, int,
- struct cmd_list_element *));
+static void reinit_frame_cache_sfunc (char *, int, struct cmd_list_element *);
static mips_extra_func_info_t
- find_proc_desc PARAMS ((CORE_ADDR pc, struct frame_info *next_frame));
+find_proc_desc (CORE_ADDR pc, struct frame_info *next_frame);
-static CORE_ADDR after_prologue PARAMS ((CORE_ADDR pc,
- mips_extra_func_info_t proc_desc));
+static CORE_ADDR after_prologue (CORE_ADDR pc,
+ mips_extra_func_info_t proc_desc);
/* This value is the model of MIPS in use. It is derived from the value
of the PrID register. */
char *tmp_mips_processor_type;
-/* Some MIPS boards don't support floating point, so we permit the
- user to turn it off. */
-
-enum mips_fpu_type mips_fpu;
-
-static char *mips_fpu_string;
-
/* A set of original names, to be used when restoring back to generic
registers from a specific set. */
-char *mips_generic_reg_names[] = REGISTER_NAMES;
+char *mips_generic_reg_names[] = MIPS_REGISTER_NAMES;
+char **mips_processor_reg_names = mips_generic_reg_names;
+
+/* The list of available "set mips " and "show mips " commands */
+static struct cmd_list_element *setmipscmdlist = NULL;
+static struct cmd_list_element *showmipscmdlist = NULL;
+char *
+mips_register_name (i)
+ int i;
+{
+ return mips_processor_reg_names[i];
+}
+/* *INDENT-OFF* */
/* Names of IDT R3041 registers. */
char *mips_r3041_reg_names[] = {
{ "lsi33k", mips_lsi33k_reg_names },
{ NULL, NULL }
};
+/* *INDENT-ON* */
+
+
+
/* Table to translate MIPS16 register field to actual register number. */
-static int mips16_to_32_reg[8] = { 16, 17, 2, 3, 4, 5, 6, 7 };
+static int mips16_to_32_reg[8] =
+{16, 17, 2, 3, 4, 5, 6, 7};
/* Heuristic_proc_start may hunt through the text section for a long
time across a 2400 baud serial line. Allows the user to limit this
static unsigned int heuristic_fence_post = 0;
-#define PROC_LOW_ADDR(proc) ((proc)->pdr.adr) /* least address */
-#define PROC_HIGH_ADDR(proc) ((proc)->high_addr) /* upper address bound */
+#define PROC_LOW_ADDR(proc) ((proc)->pdr.adr) /* least address */
+#define PROC_HIGH_ADDR(proc) ((proc)->high_addr) /* upper address bound */
#define PROC_FRAME_OFFSET(proc) ((proc)->pdr.frameoffset)
#define PROC_FRAME_REG(proc) ((proc)->pdr.framereg)
+#define PROC_FRAME_ADJUST(proc) ((proc)->frame_adjust)
#define PROC_REG_MASK(proc) ((proc)->pdr.regmask)
#define PROC_FREG_MASK(proc) ((proc)->pdr.fregmask)
#define PROC_REG_OFFSET(proc) ((proc)->pdr.regoffset)
#define SET_PROC_DESC_IS_DUMMY(proc) ((proc)->pdr.isym = _PROC_MAGIC_)
struct linked_proc_info
+ {
+ struct mips_extra_func_info info;
+ struct linked_proc_info *next;
+ }
+ *linked_proc_desc_table = NULL;
+
+void
+mips_print_extra_frame_info (fi)
+ struct frame_info *fi;
+{
+ if (fi
+ && fi->extra_info
+ && fi->extra_info->proc_desc
+ && fi->extra_info->proc_desc->pdr.framereg < NUM_REGS)
+ printf_filtered (" frame pointer is at %s+%s\n",
+ REGISTER_NAME (fi->extra_info->proc_desc->pdr.framereg),
+ paddr_d (fi->extra_info->proc_desc->pdr.frameoffset));
+}
+
+/* Convert between RAW and VIRTUAL registers. The RAW register size
+ defines the remote-gdb packet. */
+
+static int mips64_transfers_32bit_regs_p = 0;
+
+int
+mips_register_raw_size (reg_nr)
+ int reg_nr;
+{
+ if (mips64_transfers_32bit_regs_p)
+ return REGISTER_VIRTUAL_SIZE (reg_nr);
+ else
+ return MIPS_REGSIZE;
+}
+
+int
+mips_register_convertible (reg_nr)
+ int reg_nr;
+{
+ if (mips64_transfers_32bit_regs_p)
+ return 0;
+ else
+ return (REGISTER_RAW_SIZE (reg_nr) > REGISTER_VIRTUAL_SIZE (reg_nr));
+}
+
+void
+mips_register_convert_to_virtual (n, virtual_type, raw_buf, virt_buf)
+ int n;
+ struct type *virtual_type;
+ char *raw_buf;
+ char *virt_buf;
{
- struct mips_extra_func_info info;
- struct linked_proc_info *next;
-} *linked_proc_desc_table = NULL;
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ memcpy (virt_buf,
+ raw_buf + (REGISTER_RAW_SIZE (n) - TYPE_LENGTH (virtual_type)),
+ TYPE_LENGTH (virtual_type));
+ else
+ memcpy (virt_buf,
+ raw_buf,
+ TYPE_LENGTH (virtual_type));
+}
+
+void
+mips_register_convert_to_raw (virtual_type, n, virt_buf, raw_buf)
+ struct type *virtual_type;
+ int n;
+ char *virt_buf;
+ char *raw_buf;
+{
+ memset (raw_buf, 0, REGISTER_RAW_SIZE (n));
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ memcpy (raw_buf + (REGISTER_RAW_SIZE (n) - TYPE_LENGTH (virtual_type)),
+ virt_buf,
+ TYPE_LENGTH (virtual_type));
+ else
+ memcpy (raw_buf,
+ virt_buf,
+ TYPE_LENGTH (virtual_type));
+}
+
+/* Should the upper word of 64-bit addresses be zeroed? */
+static int mask_address_p = 1;
+/* Should call_function allocate stack space for a struct return? */
+int
+mips_use_struct_convention (gcc_p, type)
+ int gcc_p;
+ struct type *type;
+{
+ if (MIPS_EABI)
+ return (TYPE_LENGTH (type) > 2 * MIPS_SAVED_REGSIZE);
+ else
+ return 1; /* Structures are returned by ref in extra arg0 */
+}
/* Tell if the program counter value in MEMADDR is in a MIPS16 function. */
if (proc_desc)
{
/* If function is frameless, then we need to do it the hard way. I
- strongly suspect that frameless always means prologueless... */
+ strongly suspect that frameless always means prologueless... */
if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
&& PROC_FRAME_OFFSET (proc_desc) == 0)
return 0;
|| (inst & 0xffe00000) == 0xffa00000) /* sd reg,n($sp) */
{
/* It might be possible to use the instruction to
- find the offset, rather than the code below which
- is based on things being in a certain order in the
- frame, but figuring out what the instruction's offset
- is relative to might be a little tricky. */
+ find the offset, rather than the code below which
+ is based on things being in a certain order in the
+ frame, but figuring out what the instruction's offset
+ is relative to might be a little tricky. */
reg = (inst & 0x001f0000) >> 16;
*gen_mask |= (1 << reg);
}
else if ((inst & 0xffe00000) == 0xe7a00000 /* swc1 freg,n($sp) */
- || (inst & 0xffe00000) == 0xe7c00000 /* swc1 freg,n($r30) */
- || (inst & 0xffe00000) == 0xf7a00000)/* sdc1 freg,n($sp) */
+ || (inst & 0xffe00000) == 0xe7c00000 /* swc1 freg,n($r30) */
+ || (inst & 0xffe00000) == 0xf7a00000) /* sdc1 freg,n($sp) */
{
reg = ((inst & 0x001f0000) >> 16);
t_inst inst;
unsigned long *gen_mask;
{
- if ((inst & 0xf800) == 0xd000) /* sw reg,n($sp) */
+ if ((inst & 0xf800) == 0xd000) /* sw reg,n($sp) */
{
int reg = mips16_to_32_reg[(inst & 0x700) >> 8];
*gen_mask |= (1 << reg);
}
- else if ((inst & 0xff00) == 0xf900) /* sd reg,n($sp) */
+ else if ((inst & 0xff00) == 0xf900) /* sd reg,n($sp) */
{
int reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
*gen_mask |= (1 << reg);
}
- else if ((inst & 0xff00) == 0x6200 /* sw $ra,n($sp) */
+ else if ((inst & 0xff00) == 0x6200 /* sw $ra,n($sp) */
|| (inst & 0xff00) == 0xfa00) /* sd $ra,n($sp) */
- *gen_mask |= (1 << 31);
+ *gen_mask |= (1 << RA_REGNUM);
}
static t_inst
mips_fetch_instruction (addr)
- CORE_ADDR addr;
+ CORE_ADDR addr;
{
char buf[MIPS_INSTLEN];
int instlen;
addr = UNMAKE_MIPS16_ADDR (addr);
}
else
- instlen = MIPS_INSTLEN;
+ instlen = MIPS_INSTLEN;
status = read_memory_nobpt (addr, buf, instlen);
if (status)
memory_error (status, addr);
}
+/* These the fields of 32 bit mips instructions */
+#define mips32_op(x) (x >> 25)
+#define itype_op(x) (x >> 25)
+#define itype_rs(x) ((x >> 21)& 0x1f)
+#define itype_rt(x) ((x >> 16) & 0x1f)
+#define itype_immediate(x) ( x & 0xffff)
+
+#define jtype_op(x) (x >> 25)
+#define jtype_target(x) ( x & 0x03fffff)
+
+#define rtype_op(x) (x >>25)
+#define rtype_rs(x) ((x>>21) & 0x1f)
+#define rtype_rt(x) ((x>>16) & 0x1f)
+#define rtype_rd(x) ((x>>11) & 0x1f)
+#define rtype_shamt(x) ((x>>6) & 0x1f)
+#define rtype_funct(x) (x & 0x3f )
+
+static CORE_ADDR
+mips32_relative_offset (unsigned long inst)
+{
+ long x;
+ x = itype_immediate (inst);
+ if (x & 0x8000) /* sign bit set */
+ {
+ x |= 0xffff0000; /* sign extension */
+ }
+ x = x << 2;
+ return x;
+}
+
+/* Determine whate to set a single step breakpoint while considering
+ branch prediction */
+CORE_ADDR
+mips32_next_pc (CORE_ADDR pc)
+{
+ unsigned long inst;
+ int op;
+ inst = mips_fetch_instruction (pc);
+ if ((inst & 0xe0000000) != 0) /* Not a special, junp or branch instruction */
+ {
+ if ((inst >> 27) == 5) /* BEQL BNEZ BLEZL BGTZE , bits 0101xx */
+ {
+ op = ((inst >> 25) & 0x03);
+ switch (op)
+ {
+ case 0:
+ goto equal_branch; /* BEQL */
+ case 1:
+ goto neq_branch; /* BNEZ */
+ case 2:
+ goto less_branch; /* BLEZ */
+ case 3:
+ goto greater_branch; /* BGTZ */
+ default:
+ pc += 4;
+ }
+ }
+ else
+ pc += 4; /* Not a branch, next instruction is easy */
+ }
+ else
+ { /* This gets way messy */
+
+ /* Further subdivide into SPECIAL, REGIMM and other */
+ switch (op = ((inst >> 26) & 0x07)) /* extract bits 28,27,26 */
+ {
+ case 0: /* SPECIAL */
+ op = rtype_funct (inst);
+ switch (op)
+ {
+ case 8: /* JR */
+ case 9: /* JALR */
+ pc = read_register (rtype_rs (inst)); /* Set PC to that address */
+ break;
+ default:
+ pc += 4;
+ }
+
+ break; /* end special */
+ case 1: /* REGIMM */
+ {
+ op = jtype_op (inst); /* branch condition */
+ switch (jtype_op (inst))
+ {
+ case 0: /* BLTZ */
+ case 2: /* BLTXL */
+ case 16: /* BLTZALL */
+ case 18: /* BLTZALL */
+ less_branch:
+ if (read_register (itype_rs (inst)) < 0)
+ pc += mips32_relative_offset (inst) + 4;
+ else
+ pc += 8; /* after the delay slot */
+ break;
+ case 1: /* GEZ */
+ case 3: /* BGEZL */
+ case 17: /* BGEZAL */
+ case 19: /* BGEZALL */
+ greater_equal_branch:
+ if (read_register (itype_rs (inst)) >= 0)
+ pc += mips32_relative_offset (inst) + 4;
+ else
+ pc += 8; /* after the delay slot */
+ break;
+ /* All of the other intructions in the REGIMM catagory */
+ default:
+ pc += 4;
+ }
+ }
+ break; /* end REGIMM */
+ case 2: /* J */
+ case 3: /* JAL */
+ {
+ unsigned long reg;
+ reg = jtype_target (inst) << 2;
+ pc = reg + ((pc + 4) & 0xf0000000);
+ /* Whats this mysterious 0xf000000 adjustment ??? */
+ }
+ break;
+ /* FIXME case JALX : */
+ {
+ unsigned long reg;
+ reg = jtype_target (inst) << 2;
+ pc = reg + ((pc + 4) & 0xf0000000) + 1; /* yes, +1 */
+ /* Add 1 to indicate 16 bit mode - Invert ISA mode */
+ }
+ break; /* The new PC will be alternate mode */
+ case 4: /* BEQ , BEQL */
+ equal_branch:
+ if (read_register (itype_rs (inst)) ==
+ read_register (itype_rt (inst)))
+ pc += mips32_relative_offset (inst) + 4;
+ else
+ pc += 8;
+ break;
+ case 5: /* BNE , BNEL */
+ neq_branch:
+ if (read_register (itype_rs (inst)) !=
+ read_register (itype_rs (inst)))
+ pc += mips32_relative_offset (inst) + 4;
+ else
+ pc += 8;
+ break;
+ case 6: /* BLEZ , BLEZL */
+ less_zero_branch:
+ if (read_register (itype_rs (inst) <= 0))
+ pc += mips32_relative_offset (inst) + 4;
+ else
+ pc += 8;
+ break;
+ case 7:
+ greater_branch: /* BGTZ BGTZL */
+ if (read_register (itype_rs (inst) > 0))
+ pc += mips32_relative_offset (inst) + 4;
+ else
+ pc += 8;
+ break;
+ default:
+ pc += 8;
+ } /* switch */
+ } /* else */
+ return pc;
+} /* mips32_next_pc */
+
+/* Decoding the next place to set a breakpoint is irregular for the
+ mips 16 variant, but fortunatly, there fewer instructions. We have to cope
+ ith extensions for 16 bit instructions and a pair of actual 32 bit instructions.
+ We dont want to set a single step instruction on the extend instruction
+ either.
+ */
+
+/* Lots of mips16 instruction formats */
+/* Predicting jumps requires itype,ritype,i8type
+ and their extensions extItype,extritype,extI8type
+ */
+enum mips16_inst_fmts
+{
+ itype, /* 0 immediate 5,10 */
+ ritype, /* 1 5,3,8 */
+ rrtype, /* 2 5,3,3,5 */
+ rritype, /* 3 5,3,3,5 */
+ rrrtype, /* 4 5,3,3,3,2 */
+ rriatype, /* 5 5,3,3,1,4 */
+ shifttype, /* 6 5,3,3,3,2 */
+ i8type, /* 7 5,3,8 */
+ i8movtype, /* 8 5,3,3,5 */
+ i8mov32rtype, /* 9 5,3,5,3 */
+ i64type, /* 10 5,3,8 */
+ ri64type, /* 11 5,3,3,5 */
+ jalxtype, /* 12 5,1,5,5,16 - a 32 bit instruction */
+ exiItype, /* 13 5,6,5,5,1,1,1,1,1,1,5 */
+ extRitype, /* 14 5,6,5,5,3,1,1,1,5 */
+ extRRItype, /* 15 5,5,5,5,3,3,5 */
+ extRRIAtype, /* 16 5,7,4,5,3,3,1,4 */
+ EXTshifttype, /* 17 5,5,1,1,1,1,1,1,5,3,3,1,1,1,2 */
+ extI8type, /* 18 5,6,5,5,3,1,1,1,5 */
+ extI64type, /* 19 5,6,5,5,3,1,1,1,5 */
+ extRi64type, /* 20 5,6,5,5,3,3,5 */
+ extshift64type /* 21 5,5,1,1,1,1,1,1,5,1,1,1,3,5 */
+};
+/* I am heaping all the fields of the formats into one structure and then,
+ only the fields which are involved in instruction extension */
+struct upk_mips16
+ {
+ unsigned short inst;
+ enum mips16_inst_fmts fmt;
+ unsigned long offset;
+ unsigned int regx; /* Function in i8 type */
+ unsigned int regy;
+ };
+
+
+
+static void
+print_unpack (char *comment,
+ struct upk_mips16 *u)
+{
+ printf ("%s %04x ,f(%d) off(%s) (x(%x) y(%x)\n",
+ comment, u->inst, u->fmt, paddr (u->offset), u->regx, u->regy);
+}
+
+/* The EXT-I, EXT-ri nad EXT-I8 instructions all have the same
+ format for the bits which make up the immediatate extension.
+ */
+static unsigned long
+extended_offset (unsigned long extension)
+{
+ unsigned long value;
+ value = (extension >> 21) & 0x3f; /* * extract 15:11 */
+ value = value << 6;
+ value |= (extension >> 16) & 0x1f; /* extrace 10:5 */
+ value = value << 5;
+ value |= extension & 0x01f; /* extract 4:0 */
+ return value;
+}
+
+/* Only call this function if you know that this is an extendable
+ instruction, It wont malfunction, but why make excess remote memory references?
+ If the immediate operands get sign extended or somthing, do it after
+ the extension is performed.
+ */
+/* FIXME: Every one of these cases needs to worry about sign extension
+ when the offset is to be used in relative addressing */
+
+
+static unsigned short
+fetch_mips_16 (CORE_ADDR pc)
+{
+ char buf[8];
+ pc &= 0xfffffffe; /* clear the low order bit */
+ target_read_memory (pc, buf, 2);
+ return extract_unsigned_integer (buf, 2);
+}
+
+static void
+unpack_mips16 (CORE_ADDR pc,
+ struct upk_mips16 *upk)
+{
+ CORE_ADDR extpc;
+ unsigned long extension;
+ int extended;
+ extpc = (pc - 4) & ~0x01; /* Extensions are 32 bit instructions */
+ /* Decrement to previous address and loose the 16bit mode flag */
+ /* return if the instruction was extendable, but not actually extended */
+ extended = ((mips32_op (extension) == 30) ? 1 : 0);
+ if (extended)
+ {
+ extension = mips_fetch_instruction (extpc);
+ }
+ switch (upk->fmt)
+ {
+ case itype:
+ {
+ unsigned long value;
+ if (extended)
+ {
+ value = extended_offset (extension);
+ value = value << 11; /* rom for the original value */
+ value |= upk->inst & 0x7ff; /* eleven bits from instruction */
+ }
+ else
+ {
+ value = upk->inst & 0x7ff;
+ /* FIXME : Consider sign extension */
+ }
+ upk->offset = value;
+ }
+ break;
+ case ritype:
+ case i8type:
+ { /* A register identifier and an offset */
+ /* Most of the fields are the same as I type but the
+ immediate value is of a different length */
+ unsigned long value;
+ if (extended)
+ {
+ value = extended_offset (extension);
+ value = value << 8; /* from the original instruction */
+ value |= upk->inst & 0xff; /* eleven bits from instruction */
+ upk->regx = (extension >> 8) & 0x07; /* or i8 funct */
+ if (value & 0x4000) /* test the sign bit , bit 26 */
+ {
+ value &= ~0x3fff; /* remove the sign bit */
+ value = -value;
+ }
+ }
+ else
+ {
+ value = upk->inst & 0xff; /* 8 bits */
+ upk->regx = (upk->inst >> 8) & 0x07; /* or i8 funct */
+ /* FIXME: Do sign extension , this format needs it */
+ if (value & 0x80) /* THIS CONFUSES ME */
+ {
+ value &= 0xef; /* remove the sign bit */
+ value = -value;
+ }
+
+ }
+ upk->offset = value;
+ break;
+ }
+ case jalxtype:
+ {
+ unsigned long value;
+ unsigned short nexthalf;
+ value = ((upk->inst & 0x1f) << 5) | ((upk->inst >> 5) & 0x1f);
+ value = value << 16;
+ nexthalf = mips_fetch_instruction (pc + 2); /* low bit still set */
+ value |= nexthalf;
+ upk->offset = value;
+ break;
+ }
+ default:
+ printf_filtered ("Decoding unimplemented instruction format type\n");
+ break;
+ }
+ /* print_unpack("UPK",upk) ; */
+}
+
+
+#define mips16_op(x) (x >> 11)
+
+/* This is a map of the opcodes which ae known to perform branches */
+static unsigned char map16[32] =
+{0, 0, 1, 1, 1, 1, 0, 0,
+ 0, 0, 0, 0, 1, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 1, 1, 0
+};
+
+static CORE_ADDR
+add_offset_16 (CORE_ADDR pc, int offset)
+{
+ return ((offset << 2) | ((pc + 2) & (0xf0000000)));
+
+}
+
+
+
+static struct upk_mips16 upk;
+
+CORE_ADDR
+mips16_next_pc (CORE_ADDR pc)
+{
+ int op;
+ t_inst inst;
+ /* inst = mips_fetch_instruction(pc) ; - This doesnt always work */
+ inst = fetch_mips_16 (pc);
+ upk.inst = inst;
+ op = mips16_op (upk.inst);
+ if (map16[op])
+ {
+ int reg;
+ switch (op)
+ {
+ case 2: /* Branch */
+ upk.fmt = itype;
+ unpack_mips16 (pc, &upk);
+ {
+ long offset;
+ offset = upk.offset;
+ if (offset & 0x800)
+ {
+ offset &= 0xeff;
+ offset = -offset;
+ }
+ pc += (offset << 1) + 2;
+ }
+ break;
+ case 3: /* JAL , JALX - Watch out, these are 32 bit instruction */
+ upk.fmt = jalxtype;
+ unpack_mips16 (pc, &upk);
+ pc = add_offset_16 (pc, upk.offset);
+ if ((upk.inst >> 10) & 0x01) /* Exchange mode */
+ pc = pc & ~0x01; /* Clear low bit, indicate 32 bit mode */
+ else
+ pc |= 0x01;
+ break;
+ case 4: /* beqz */
+ upk.fmt = ritype;
+ unpack_mips16 (pc, &upk);
+ reg = read_register (upk.regx);
+ if (reg == 0)
+ pc += (upk.offset << 1) + 2;
+ else
+ pc += 2;
+ break;
+ case 5: /* bnez */
+ upk.fmt = ritype;
+ unpack_mips16 (pc, &upk);
+ reg = read_register (upk.regx);
+ if (reg != 0)
+ pc += (upk.offset << 1) + 2;
+ else
+ pc += 2;
+ break;
+ case 12: /* I8 Formats btez btnez */
+ upk.fmt = i8type;
+ unpack_mips16 (pc, &upk);
+ /* upk.regx contains the opcode */
+ reg = read_register (24); /* Test register is 24 */
+ if (((upk.regx == 0) && (reg == 0)) /* BTEZ */
+ || ((upk.regx == 1) && (reg != 0))) /* BTNEZ */
+ /* pc = add_offset_16(pc,upk.offset) ; */
+ pc += (upk.offset << 1) + 2;
+ else
+ pc += 2;
+ break;
+ case 29: /* RR Formats JR, JALR, JALR-RA */
+ upk.fmt = rrtype;
+ op = upk.inst & 0x1f;
+ if (op == 0)
+ {
+ upk.regx = (upk.inst >> 8) & 0x07;
+ upk.regy = (upk.inst >> 5) & 0x07;
+ switch (upk.regy)
+ {
+ case 0:
+ reg = upk.regx;
+ break;
+ case 1:
+ reg = 31;
+ break; /* Function return instruction */
+ case 2:
+ reg = upk.regx;
+ break;
+ default:
+ reg = 31;
+ break; /* BOGUS Guess */
+ }
+ pc = read_register (reg);
+ }
+ else
+ pc += 2;
+ break;
+ case 30: /* This is an extend instruction */
+ pc += 4; /* Dont be setting breakpints on the second half */
+ break;
+ default:
+ printf ("Filtered - next PC probably incorrrect due to jump inst\n");
+ pc += 2;
+ break;
+ }
+ }
+ else
+ pc += 2; /* just a good old instruction */
+ /* See if we CAN actually break on the next instruction */
+ /* printf("NXTm16PC %08x\n",(unsigned long)pc) ; */
+ return pc;
+} /* mips16_next_pc */
+
+/* The mips_next_pc function supports single_tep when the remote target monitor or
+ stub is not developed enough to so a single_step.
+ It works by decoding the current instruction and predicting where a branch
+ will go. This isnt hard because all the data is available.
+ The MIPS32 and MIPS16 variants are quite different
+ */
+CORE_ADDR
+mips_next_pc (CORE_ADDR pc)
+{
+ t_inst inst;
+ /* inst = mips_fetch_instruction(pc) ; */
+ /* if (pc_is_mips16) <----- This is failing */
+ if (pc & 0x01)
+ return mips16_next_pc (pc);
+ else
+ return mips32_next_pc (pc);
+} /* mips_next_pc */
+
/* Guaranteed to set fci->saved_regs to some values (it never leaves it
NULL). */
mips_extra_func_info_t proc_desc;
t_inst inst;
- fci->saved_regs = (struct frame_saved_regs *)
- obstack_alloc (&frame_cache_obstack, sizeof(struct frame_saved_regs));
- memset (fci->saved_regs, 0, sizeof (struct frame_saved_regs));
+ frame_saved_regs_zalloc (fci);
/* If it is the frame for sigtramp, the saved registers are located
in a sigcontext structure somewhere on the stack.
{
for (ireg = 0; ireg < MIPS_NUMREGS; ireg++)
{
- reg_position = fci->frame + SIGFRAME_REGSAVE_OFF
- + ireg * SIGFRAME_REG_SIZE;
- fci->saved_regs->regs[ireg] = reg_position;
+ reg_position = fci->frame + SIGFRAME_REGSAVE_OFF
+ + ireg * SIGFRAME_REG_SIZE;
+ fci->saved_regs[ireg] = reg_position;
}
for (ireg = 0; ireg < MIPS_NUMREGS; ireg++)
{
- reg_position = fci->frame + SIGFRAME_FPREGSAVE_OFF
- + ireg * SIGFRAME_REG_SIZE;
- fci->saved_regs->regs[FP0_REGNUM + ireg] = reg_position;
+ reg_position = fci->frame + SIGFRAME_FPREGSAVE_OFF
+ + ireg * SIGFRAME_REG_SIZE;
+ fci->saved_regs[FP0_REGNUM + ireg] = reg_position;
}
- fci->saved_regs->regs[PC_REGNUM] = fci->frame + SIGFRAME_PC_OFF;
+ fci->saved_regs[PC_REGNUM] = fci->frame + SIGFRAME_PC_OFF;
return;
}
- proc_desc = fci->proc_desc;
+ proc_desc = fci->extra_info->proc_desc;
if (proc_desc == NULL)
/* I'm not sure how/whether this can happen. Normally when we can't
find a proc_desc, we "synthesize" one using heuristic_proc_desc
and set the saved_regs right away. */
return;
- kernel_trap = PROC_REG_MASK(proc_desc) & 1;
- gen_mask = kernel_trap ? 0xFFFFFFFF : PROC_REG_MASK(proc_desc);
- float_mask = kernel_trap ? 0xFFFFFFFF : PROC_FREG_MASK(proc_desc);
+ kernel_trap = PROC_REG_MASK (proc_desc) & 1;
+ gen_mask = kernel_trap ? 0xFFFFFFFF : PROC_REG_MASK (proc_desc);
+ float_mask = kernel_trap ? 0xFFFFFFFF : PROC_FREG_MASK (proc_desc);
- if (/* In any frame other than the innermost or a frame interrupted by
- a signal, we assume that all registers have been saved.
- This assumes that all register saves in a function happen before
- the first function call. */
- (fci->next == NULL || fci->next->signal_handler_caller)
+ if ( /* In any frame other than the innermost or a frame interrupted by
+ a signal, we assume that all registers have been saved.
+ This assumes that all register saves in a function happen before
+ the first function call. */
+ (fci->next == NULL || fci->next->signal_handler_caller)
- /* In a dummy frame we know exactly where things are saved. */
- && !PROC_DESC_IS_DUMMY (proc_desc)
+ /* In a dummy frame we know exactly where things are saved. */
+ && !PROC_DESC_IS_DUMMY (proc_desc)
- /* Don't bother unless we are inside a function prologue. Outside the
- prologue, we know where everything is. */
+ /* Don't bother unless we are inside a function prologue. Outside the
+ prologue, we know where everything is. */
- && in_prologue (fci->pc, PROC_LOW_ADDR (proc_desc))
+ && in_prologue (fci->pc, PROC_LOW_ADDR (proc_desc))
- /* Not sure exactly what kernel_trap means, but if it means
- the kernel saves the registers without a prologue doing it,
- we better not examine the prologue to see whether registers
- have been saved yet. */
- && !kernel_trap)
+ /* Not sure exactly what kernel_trap means, but if it means
+ the kernel saves the registers without a prologue doing it,
+ we better not examine the prologue to see whether registers
+ have been saved yet. */
+ && !kernel_trap)
{
/* We need to figure out whether the registers that the proc_desc
- claims are saved have been saved yet. */
+ claims are saved have been saved yet. */
CORE_ADDR addr;
/* Fill in the offsets for the registers which gen_mask says
were saved. */
reg_position = fci->frame + PROC_REG_OFFSET (proc_desc);
- for (ireg= MIPS_NUMREGS-1; gen_mask; --ireg, gen_mask <<= 1)
+ for (ireg = MIPS_NUMREGS - 1; gen_mask; --ireg, gen_mask <<= 1)
if (gen_mask & 0x80000000)
{
- fci->saved_regs->regs[ireg] = reg_position;
- reg_position -= MIPS_REGSIZE;
+ fci->saved_regs[ireg] = reg_position;
+ reg_position -= MIPS_SAVED_REGSIZE;
}
/* The MIPS16 entry instruction saves $s0 and $s1 in the reverse order
if (pc_is_mips16 (PROC_LOW_ADDR (proc_desc)))
{
inst = mips_fetch_instruction (PROC_LOW_ADDR (proc_desc));
- if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
+ if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
{
int reg;
int sreg_count = (inst >> 6) & 3;
-
+
/* Check if the ra register was pushed on the stack. */
reg_position = fci->frame + PROC_REG_OFFSET (proc_desc);
if (inst & 0x20)
- reg_position -= MIPS_REGSIZE;
+ reg_position -= MIPS_SAVED_REGSIZE;
/* Check if the s0 and s1 registers were pushed on the stack. */
- for (reg = 16; reg < sreg_count+16; reg++)
+ for (reg = 16; reg < sreg_count + 16; reg++)
{
- fci->saved_regs->regs[reg] = reg_position;
- reg_position -= MIPS_REGSIZE;
+ fci->saved_regs[reg] = reg_position;
+ reg_position -= MIPS_SAVED_REGSIZE;
}
}
}
/* The freg_offset points to where the first *double* register
is saved. So skip to the high-order word. */
- if (! GDB_TARGET_IS_MIPS64)
- reg_position += MIPS_REGSIZE;
+ if (!GDB_TARGET_IS_MIPS64)
+ reg_position += MIPS_SAVED_REGSIZE;
/* Fill in the offsets for the float registers which float_mask says
were saved. */
- for (ireg = MIPS_NUMREGS-1; float_mask; --ireg, float_mask <<= 1)
+ for (ireg = MIPS_NUMREGS - 1; float_mask; --ireg, float_mask <<= 1)
if (float_mask & 0x80000000)
{
- fci->saved_regs->regs[FP0_REGNUM+ireg] = reg_position;
- reg_position -= MIPS_REGSIZE;
+ fci->saved_regs[FP0_REGNUM + ireg] = reg_position;
+ reg_position -= MIPS_SAVED_REGSIZE;
}
- fci->saved_regs->regs[PC_REGNUM] = fci->saved_regs->regs[RA_REGNUM];
+ fci->saved_regs[PC_REGNUM] = fci->saved_regs[RA_REGNUM];
}
static CORE_ADDR
-read_next_frame_reg(fi, regno)
+read_next_frame_reg (fi, regno)
struct frame_info *fi;
int regno;
{
for (; fi; fi = fi->next)
{
/* We have to get the saved sp from the sigcontext
- if it is a signal handler frame. */
+ if it is a signal handler frame. */
if (regno == SP_REGNUM && !fi->signal_handler_caller)
return fi->frame;
else
{
if (fi->saved_regs == NULL)
mips_find_saved_regs (fi);
- if (fi->saved_regs->regs[regno])
- return read_memory_integer(fi->saved_regs->regs[regno], MIPS_REGSIZE);
+ if (fi->saved_regs[regno])
+ return read_memory_integer (ADDR_BITS_REMOVE (fi->saved_regs[regno]), MIPS_SAVED_REGSIZE);
}
}
return read_register (regno);
CORE_ADDR
mips_addr_bits_remove (addr)
- CORE_ADDR addr;
-{
-#if GDB_TARGET_IS_MIPS64
- if ((addr >> 32 == (CORE_ADDR)0xffffffff)
- && (strcmp (target_shortname,"pmon")==0
- || strcmp (target_shortname,"ddb")==0
- || strcmp (target_shortname,"sim")==0))
- {
- /* This hack is a work-around for existing boards using PMON,
- the simulator, and any other 64-bit targets that doesn't have
- true 64-bit addressing. On these targets, the upper 32 bits
- of addresses are ignored by the hardware. Thus, the PC or SP
- are likely to have been sign extended to all 1s by instruction
- sequences that load 32-bit addresses. For example, a typical
- piece of code that loads an address is this:
- lui $r2, <upper 16 bits>
- ori $r2, <lower 16 bits>
- But the lui sign-extends the value such that the upper 32 bits
- may be all 1s. The workaround is simply to mask off these bits.
- In the future, gcc may be changed to support true 64-bit
- addressing, and this masking will have to be disabled. */
- addr &= (CORE_ADDR)0xffffffff;
- }
-#else
- /* Even when GDB is configured for some 32-bit targets (e.g. mips-elf),
- BFD is configured to handle 64-bit targets, so CORE_ADDR is 64 bits.
- So we still have to mask off useless bits from addresses. */
- addr &= (CORE_ADDR)0xffffffff;
-#endif
-
+ CORE_ADDR addr;
+{
+ if (GDB_TARGET_IS_MIPS64)
+ {
+ if (mask_address_p && (addr >> 32 == (CORE_ADDR) 0xffffffff))
+ {
+ /* This hack is a work-around for existing boards using
+ PMON, the simulator, and any other 64-bit targets that
+ doesn't have true 64-bit addressing. On these targets,
+ the upper 32 bits of addresses are ignored by the
+ hardware. Thus, the PC or SP are likely to have been
+ sign extended to all 1s by instruction sequences that
+ load 32-bit addresses. For example, a typical piece of
+ code that loads an address is this: lui $r2, <upper 16
+ bits> ori $r2, <lower 16 bits> But the lui sign-extends
+ the value such that the upper 32 bits may be all 1s. The
+ workaround is simply to mask off these bits. In the
+ future, gcc may be changed to support true 64-bit
+ addressing, and this masking will have to be disabled. */
+ addr &= (CORE_ADDR) 0xffffffff;
+ }
+ }
+ else
+ {
+ /* Even when GDB is configured for some 32-bit targets
+ (e.g. mips-elf), BFD is configured to handle 64-bit targets,
+ so CORE_ADDR is 64 bits. So we still have to mask off
+ useless bits from addresses. */
+ addr &= (CORE_ADDR) 0xffffffff;
+ }
return addr;
}
CORE_ADDR pc, tmp;
pc = ((fromleaf) ? SAVED_PC_AFTER_CALL (prev->next) :
- prev->next ? FRAME_SAVED_PC (prev->next) : read_pc ());
+ prev->next ? FRAME_SAVED_PC (prev->next) : read_pc ());
tmp = mips_skip_stub (pc);
- prev->pc = tmp ? tmp : pc;
+ prev->pc = tmp ? tmp : pc;
}
CORE_ADDR
-mips_frame_saved_pc(frame)
+mips_frame_saved_pc (frame)
struct frame_info *frame;
{
CORE_ADDR saved_pc;
- mips_extra_func_info_t proc_desc = frame->proc_desc;
+ mips_extra_func_info_t proc_desc = frame->extra_info->proc_desc;
/* We have to get the saved pc from the sigcontext
if it is a signal handler frame. */
int pcreg = frame->signal_handler_caller ? PC_REGNUM
- : (proc_desc ? PROC_PC_REG(proc_desc) : RA_REGNUM);
+ : (proc_desc ? PROC_PC_REG (proc_desc) : RA_REGNUM);
- if (proc_desc && PROC_DESC_IS_DUMMY(proc_desc))
- saved_pc = read_memory_integer(frame->frame - MIPS_REGSIZE, MIPS_REGSIZE);
+ if (proc_desc && PROC_DESC_IS_DUMMY (proc_desc))
+ saved_pc = read_memory_integer (frame->frame - MIPS_SAVED_REGSIZE, MIPS_SAVED_REGSIZE);
else
- saved_pc = read_next_frame_reg(frame, pcreg);
+ saved_pc = read_next_frame_reg (frame, pcreg);
return ADDR_BITS_REMOVE (saved_pc);
}
static struct mips_extra_func_info temp_proc_desc;
-static struct frame_saved_regs temp_saved_regs;
+static CORE_ADDR temp_saved_regs[NUM_REGS];
-/* This fencepost looks highly suspicious to me. Removing it also
- seems suspicious as it could affect remote debugging across serial
- lines. */
+/* Set a register's saved stack address in temp_saved_regs. If an address
+ has already been set for this register, do nothing; this way we will
+ only recognize the first save of a given register in a function prologue.
+ This is a helper function for mips{16,32}_heuristic_proc_desc. */
-static CORE_ADDR
-heuristic_proc_start(pc)
- CORE_ADDR pc;
+static void
+set_reg_offset (regno, offset)
+ int regno;
+ CORE_ADDR offset;
{
- CORE_ADDR start_pc;
- CORE_ADDR fence;
- int instlen;
- int seen_adjsp = 0;
-
- pc = ADDR_BITS_REMOVE (pc);
- start_pc = pc;
- fence = start_pc - heuristic_fence_post;
- if (start_pc == 0) return 0;
+ if (temp_saved_regs[regno] == 0)
+ temp_saved_regs[regno] = offset;
+}
- if (heuristic_fence_post == UINT_MAX
- || fence < VM_MIN_ADDRESS)
- fence = VM_MIN_ADDRESS;
- instlen = pc_is_mips16 (pc) ? MIPS16_INSTLEN : MIPS_INSTLEN;
+/* Test whether the PC points to the return instruction at the
+ end of a function. */
- /* search back for previous return */
- for (start_pc -= instlen; ; start_pc -= instlen)
- if (start_pc < fence)
- {
- /* It's not clear to me why we reach this point when
- stop_soon_quietly, but with this test, at least we
- don't print out warnings for every child forked (eg, on
- decstation). 22apr93 rich@cygnus.com. */
- if (!stop_soon_quietly)
- {
- static int blurb_printed = 0;
+static int
+mips_about_to_return (pc)
+ CORE_ADDR pc;
+{
+ if (pc_is_mips16 (pc))
+ /* This mips16 case isn't necessarily reliable. Sometimes the compiler
+ generates a "jr $ra"; other times it generates code to load
+ the return address from the stack to an accessible register (such
+ as $a3), then a "jr" using that register. This second case
+ is almost impossible to distinguish from an indirect jump
+ used for switch statements, so we don't even try. */
+ return mips_fetch_instruction (pc) == 0xe820; /* jr $ra */
+ else
+ return mips_fetch_instruction (pc) == 0x3e00008; /* jr $ra */
+}
- if (fence == VM_MIN_ADDRESS)
- warning("Hit beginning of text section without finding");
- else
- warning("Hit heuristic-fence-post without finding");
-
- warning("enclosing function for address 0x%s", paddr_nz (pc));
- if (!blurb_printed)
- {
- printf_filtered ("\
-This warning occurs if you are debugging a function without any symbols\n\
-(for example, in a stripped executable). In that case, you may wish to\n\
-increase the size of the search with the `set heuristic-fence-post' command.\n\
-\n\
-Otherwise, you told GDB there was a function where there isn't one, or\n\
-(more likely) you have encountered a bug in GDB.\n");
- blurb_printed = 1;
- }
- }
- return 0;
- }
- else if (pc_is_mips16 (start_pc))
- {
- unsigned short inst;
-
- /* On MIPS16, any one of the following is likely to be the
- start of a function:
- entry
- addiu sp,-n
- daddiu sp,-n
- extend -n followed by 'addiu sp,+n' or 'daddiu sp,+n' */
- inst = mips_fetch_instruction (start_pc);
- if (((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
- || (inst & 0xff80) == 0x6380 /* addiu sp,-n */
- || (inst & 0xff80) == 0xfb80 /* daddiu sp,-n */
- || ((inst & 0xf810) == 0xf010 && seen_adjsp)) /* extend -n */
- break;
- else if ((inst & 0xff00) == 0x6300 /* addiu sp */
- || (inst & 0xff00) == 0xfb00) /* daddiu sp */
- seen_adjsp = 1;
- else
- seen_adjsp = 0;
- }
- else if (ABOUT_TO_RETURN(start_pc))
+/* This fencepost looks highly suspicious to me. Removing it also
+ seems suspicious as it could affect remote debugging across serial
+ lines. */
+
+static CORE_ADDR
+heuristic_proc_start (pc)
+ CORE_ADDR pc;
+{
+ CORE_ADDR start_pc;
+ CORE_ADDR fence;
+ int instlen;
+ int seen_adjsp = 0;
+
+ pc = ADDR_BITS_REMOVE (pc);
+ start_pc = pc;
+ fence = start_pc - heuristic_fence_post;
+ if (start_pc == 0)
+ return 0;
+
+ if (heuristic_fence_post == UINT_MAX
+ || fence < VM_MIN_ADDRESS)
+ fence = VM_MIN_ADDRESS;
+
+ instlen = pc_is_mips16 (pc) ? MIPS16_INSTLEN : MIPS_INSTLEN;
+
+ /* search back for previous return */
+ for (start_pc -= instlen;; start_pc -= instlen)
+ if (start_pc < fence)
+ {
+ /* It's not clear to me why we reach this point when
+ stop_soon_quietly, but with this test, at least we
+ don't print out warnings for every child forked (eg, on
+ decstation). 22apr93 rich@cygnus.com. */
+ if (!stop_soon_quietly)
{
- start_pc += 2 * MIPS_INSTLEN; /* skip return, and its delay slot */
- break;
+ static int blurb_printed = 0;
+
+ warning ("Warning: GDB can't find the start of the function at 0x%s.",
+ paddr_nz (pc));
+
+ if (!blurb_printed)
+ {
+ /* This actually happens frequently in embedded
+ development, when you first connect to a board
+ and your stack pointer and pc are nowhere in
+ particular. This message needs to give people
+ in that situation enough information to
+ determine that it's no big deal. */
+ printf_filtered ("\n\
+ GDB is unable to find the start of the function at 0x%s\n\
+and thus can't determine the size of that function's stack frame.\n\
+This means that GDB may be unable to access that stack frame, or\n\
+the frames below it.\n\
+ This problem is most likely caused by an invalid program counter or\n\
+stack pointer.\n\
+ However, if you think GDB should simply search farther back\n\
+from 0x%s for code which looks like the beginning of a\n\
+function, you can increase the range of the search using the `set\n\
+heuristic-fence-post' command.\n",
+ paddr_nz (pc), paddr_nz (pc));
+ blurb_printed = 1;
+ }
}
+ return 0;
+ }
+ else if (pc_is_mips16 (start_pc))
+ {
+ unsigned short inst;
+
+ /* On MIPS16, any one of the following is likely to be the
+ start of a function:
+ entry
+ addiu sp,-n
+ daddiu sp,-n
+ extend -n followed by 'addiu sp,+n' or 'daddiu sp,+n' */
+ inst = mips_fetch_instruction (start_pc);
+ if (((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
+ || (inst & 0xff80) == 0x6380 /* addiu sp,-n */
+ || (inst & 0xff80) == 0xfb80 /* daddiu sp,-n */
+ || ((inst & 0xf810) == 0xf010 && seen_adjsp)) /* extend -n */
+ break;
+ else if ((inst & 0xff00) == 0x6300 /* addiu sp */
+ || (inst & 0xff00) == 0xfb00) /* daddiu sp */
+ seen_adjsp = 1;
+ else
+ seen_adjsp = 0;
+ }
+ else if (mips_about_to_return (start_pc))
+ {
+ start_pc += 2 * MIPS_INSTLEN; /* skip return, and its delay slot */
+ break;
+ }
+
#if 0
- /* skip nops (usually 1) 0 - is this */
- while (start_pc < pc && read_memory_integer (start_pc, MIPS_INSTLEN) == 0)
- start_pc += MIPS_INSTLEN;
+ /* skip nops (usually 1) 0 - is this */
+ while (start_pc < pc && read_memory_integer (start_pc, MIPS_INSTLEN) == 0)
+ start_pc += MIPS_INSTLEN;
#endif
- return start_pc;
+ return start_pc;
}
/* Fetch the immediate value from a MIPS16 instruction.
static int
mips16_get_imm (prev_inst, inst, nbits, scale, is_signed)
- unsigned short prev_inst; /* previous instruction */
- unsigned short inst; /* current current instruction */
- int nbits; /* number of bits in imm field */
- int scale; /* scale factor to be applied to imm */
- int is_signed; /* is the imm field signed? */
+ unsigned short prev_inst; /* previous instruction */
+ unsigned short inst; /* current instruction */
+ int nbits; /* number of bits in imm field */
+ int scale; /* scale factor to be applied to imm */
+ int is_signed; /* is the imm field signed? */
{
int offset;
if ((prev_inst & 0xf800) == 0xf000) /* prev instruction was EXTEND? */
{
offset = ((prev_inst & 0x1f) << 11) | (prev_inst & 0x7e0);
- if (offset & 0x8000) /* check for negative extend */
+ if (offset & 0x8000) /* check for negative extend */
offset = 0 - (0x10000 - (offset & 0xffff));
return offset | (inst & 0x1f);
}
stream from start_pc to limit_pc. */
static void
-mips16_heuristic_proc_desc(start_pc, limit_pc, next_frame, sp)
- CORE_ADDR start_pc, limit_pc;
- struct frame_info *next_frame;
- CORE_ADDR sp;
+mips16_heuristic_proc_desc (start_pc, limit_pc, next_frame, sp)
+ CORE_ADDR start_pc, limit_pc;
+ struct frame_info *next_frame;
+ CORE_ADDR sp;
{
CORE_ADDR cur_pc;
CORE_ADDR frame_addr = 0; /* Value of $r17, used as frame pointer */
unsigned short prev_inst = 0; /* saved copy of previous instruction */
unsigned inst = 0; /* current instruction */
+ unsigned entry_inst = 0; /* the entry instruction */
+ int reg, offset;
- PROC_FRAME_OFFSET(&temp_proc_desc) = 0;
+ PROC_FRAME_OFFSET (&temp_proc_desc) = 0; /* size of stack frame */
+ PROC_FRAME_ADJUST (&temp_proc_desc) = 0; /* offset of FP from SP */
for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS16_INSTLEN)
{
- int reg, offset;
-
/* Save the previous instruction. If it's an EXTEND, we'll extract
the immediate offset extension from it in mips16_get_imm. */
prev_inst = inst;
/* Fetch and decode the instruction. */
inst = (unsigned short) mips_fetch_instruction (cur_pc);
- if ((inst & 0xff00) == 0x6300 /* addiu sp */
+ if ((inst & 0xff00) == 0x6300 /* addiu sp */
|| (inst & 0xff00) == 0xfb00) /* daddiu sp */
{
offset = mips16_get_imm (prev_inst, inst, 8, 8, 1);
- if (offset < 0) /* negative stack adjustment? */
- PROC_FRAME_OFFSET(&temp_proc_desc) -= offset;
+ if (offset < 0) /* negative stack adjustment? */
+ PROC_FRAME_OFFSET (&temp_proc_desc) -= offset;
else
/* Exit loop if a positive stack adjustment is found, which
usually means that the stack cleanup code in the function
{
offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
reg = mips16_to_32_reg[(inst & 0x700) >> 8];
- PROC_REG_MASK(&temp_proc_desc) |= (1 << reg);
- temp_saved_regs.regs[reg] = sp + offset;
+ PROC_REG_MASK (&temp_proc_desc) |= (1 << reg);
+ set_reg_offset (reg, sp + offset);
}
else if ((inst & 0xff00) == 0xf900) /* sd reg,n($sp) */
{
offset = mips16_get_imm (prev_inst, inst, 5, 8, 0);
reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
- PROC_REG_MASK(&temp_proc_desc) |= (1 << reg);
- temp_saved_regs.regs[reg] = sp + offset;
+ PROC_REG_MASK (&temp_proc_desc) |= (1 << reg);
+ set_reg_offset (reg, sp + offset);
}
else if ((inst & 0xff00) == 0x6200) /* sw $ra,n($sp) */
{
offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
- PROC_REG_MASK(&temp_proc_desc) |= (1 << 31);
- temp_saved_regs.regs[31] = sp + offset;
+ PROC_REG_MASK (&temp_proc_desc) |= (1 << RA_REGNUM);
+ set_reg_offset (RA_REGNUM, sp + offset);
}
else if ((inst & 0xff00) == 0xfa00) /* sd $ra,n($sp) */
{
offset = mips16_get_imm (prev_inst, inst, 8, 8, 0);
- PROC_REG_MASK(&temp_proc_desc) |= (1 << 31);
- temp_saved_regs.regs[31] = sp + offset;
+ PROC_REG_MASK (&temp_proc_desc) |= (1 << RA_REGNUM);
+ set_reg_offset (RA_REGNUM, sp + offset);
}
- else if (inst == 0x673d) /* move $s1, $sp */
+ else if (inst == 0x673d) /* move $s1, $sp */
{
- frame_addr = read_next_frame_reg(next_frame, 30);
+ frame_addr = sp;
PROC_FRAME_REG (&temp_proc_desc) = 17;
}
else if ((inst & 0xff00) == 0x0100) /* addiu $s1,sp,n */
offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
frame_addr = sp + offset;
PROC_FRAME_REG (&temp_proc_desc) = 17;
+ PROC_FRAME_ADJUST (&temp_proc_desc) = offset;
}
else if ((inst & 0xFF00) == 0xd900) /* sw reg,offset($s1) */
{
offset = mips16_get_imm (prev_inst, inst, 5, 4, 0);
reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
- PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
- temp_saved_regs.regs[reg] = frame_addr + offset;
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (reg, frame_addr + offset);
}
else if ((inst & 0xFF00) == 0x7900) /* sd reg,offset($s1) */
{
offset = mips16_get_imm (prev_inst, inst, 5, 8, 0);
reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
- PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
- temp_saved_regs.regs[reg] = frame_addr + offset;
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (reg, frame_addr + offset);
}
- else if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
- {
- int areg_count = (inst >> 8) & 7;
- int sreg_count = (inst >> 6) & 3;
+ else if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
+ entry_inst = inst; /* save for later processing */
+ else if ((inst & 0xf800) == 0x1800) /* jal(x) */
+ cur_pc += MIPS16_INSTLEN; /* 32-bit instruction */
+ }
- /* The entry instruction always subtracts 32 from the SP. */
- PROC_FRAME_OFFSET(&temp_proc_desc) += 32;
+ /* The entry instruction is typically the first instruction in a function,
+ and it stores registers at offsets relative to the value of the old SP
+ (before the prologue). But the value of the sp parameter to this
+ function is the new SP (after the prologue has been executed). So we
+ can't calculate those offsets until we've seen the entire prologue,
+ and can calculate what the old SP must have been. */
+ if (entry_inst != 0)
+ {
+ int areg_count = (entry_inst >> 8) & 7;
+ int sreg_count = (entry_inst >> 6) & 3;
- /* Check if a0-a3 were saved in the caller's argument save area. */
- for (reg = 4, offset = 32; reg < areg_count+4; reg++)
- {
- PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
- temp_saved_regs.regs[reg] = sp + offset;
- offset -= MIPS_REGSIZE;
- }
+ /* The entry instruction always subtracts 32 from the SP. */
+ PROC_FRAME_OFFSET (&temp_proc_desc) += 32;
- /* Check if the ra register was pushed on the stack. */
- offset = 28;
- if (inst & 0x20)
- {
- PROC_REG_MASK(&temp_proc_desc) |= 1 << 31;
- temp_saved_regs.regs[31] = sp + offset;
- offset -= MIPS_REGSIZE;
- }
+ /* Now we can calculate what the SP must have been at the
+ start of the function prologue. */
+ sp += PROC_FRAME_OFFSET (&temp_proc_desc);
- /* Check if the s0 and s1 registers were pushed on the stack. */
- for (reg = 16; reg < sreg_count+16; reg++)
- {
- PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
- temp_saved_regs.regs[reg] = sp + offset;
- offset -= MIPS_REGSIZE;
- }
+ /* Check if a0-a3 were saved in the caller's argument save area. */
+ for (reg = 4, offset = 0; reg < areg_count + 4; reg++)
+ {
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (reg, sp + offset);
+ offset += MIPS_SAVED_REGSIZE;
+ }
+
+ /* Check if the ra register was pushed on the stack. */
+ offset = -4;
+ if (entry_inst & 0x20)
+ {
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << RA_REGNUM;
+ set_reg_offset (RA_REGNUM, sp + offset);
+ offset -= MIPS_SAVED_REGSIZE;
+ }
+
+ /* Check if the s0 and s1 registers were pushed on the stack. */
+ for (reg = 16; reg < sreg_count + 16; reg++)
+ {
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (reg, sp + offset);
+ offset -= MIPS_SAVED_REGSIZE;
}
- else if ((inst & 0xf800) == 0x1800) /* jal(x) */
- cur_pc += MIPS16_INSTLEN; /* 32-bit instruction */
}
}
static void
-mips32_heuristic_proc_desc(start_pc, limit_pc, next_frame, sp)
- CORE_ADDR start_pc, limit_pc;
- struct frame_info *next_frame;
- CORE_ADDR sp;
+mips32_heuristic_proc_desc (start_pc, limit_pc, next_frame, sp)
+ CORE_ADDR start_pc, limit_pc;
+ struct frame_info *next_frame;
+ CORE_ADDR sp;
{
CORE_ADDR cur_pc;
- CORE_ADDR frame_addr = 0; /* Value of $r30. Used by gcc for frame-pointer */
+ CORE_ADDR frame_addr = 0; /* Value of $r30. Used by gcc for frame-pointer */
restart:
- PROC_FRAME_OFFSET(&temp_proc_desc) = 0;
+ memset (temp_saved_regs, '\0', SIZEOF_FRAME_SAVED_REGS);
+ PROC_FRAME_OFFSET (&temp_proc_desc) = 0;
+ PROC_FRAME_ADJUST (&temp_proc_desc) = 0; /* offset of FP from SP */
for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS_INSTLEN)
{
unsigned long inst, high_word, low_word;
low_word = inst & 0xffff;
reg = high_word & 0x1f;
- if (high_word == 0x27bd /* addiu $sp,$sp,-i */
+ if (high_word == 0x27bd /* addiu $sp,$sp,-i */
|| high_word == 0x23bd /* addi $sp,$sp,-i */
|| high_word == 0x67bd) /* daddiu $sp,$sp,-i */
{
if (low_word & 0x8000) /* negative stack adjustment? */
- PROC_FRAME_OFFSET(&temp_proc_desc) += 0x10000 - low_word;
+ PROC_FRAME_OFFSET (&temp_proc_desc) += 0x10000 - low_word;
else
/* Exit loop if a positive stack adjustment is found, which
usually means that the stack cleanup code in the function
}
else if ((high_word & 0xFFE0) == 0xafa0) /* sw reg,offset($sp) */
{
- PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
- temp_saved_regs.regs[reg] = sp + low_word;
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (reg, sp + low_word);
}
else if ((high_word & 0xFFE0) == 0xffa0) /* sd reg,offset($sp) */
{
/* Irix 6.2 N32 ABI uses sd instructions for saving $gp and $ra,
but the register size used is only 32 bits. Make the address
for the saved register point to the lower 32 bits. */
- PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
- temp_saved_regs.regs[reg] = sp + low_word + 8 - MIPS_REGSIZE;
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (reg, sp + low_word + 8 - MIPS_REGSIZE);
}
- else if (high_word == 0x27be) /* addiu $30,$sp,size */
+ else if (high_word == 0x27be) /* addiu $30,$sp,size */
{
/* Old gcc frame, r30 is virtual frame pointer. */
- if ((long)low_word != PROC_FRAME_OFFSET(&temp_proc_desc))
- frame_addr = sp + low_word;
+ if ((long) low_word != PROC_FRAME_OFFSET (&temp_proc_desc))
+ frame_addr = sp + low_word;
else if (PROC_FRAME_REG (&temp_proc_desc) == SP_REGNUM)
{
unsigned alloca_adjust;
PROC_FRAME_REG (&temp_proc_desc) = 30;
- frame_addr = read_next_frame_reg(next_frame, 30);
- alloca_adjust = (unsigned)(frame_addr - (sp + low_word));
+ frame_addr = read_next_frame_reg (next_frame, 30);
+ alloca_adjust = (unsigned) (frame_addr - (sp + low_word));
if (alloca_adjust > 0)
{
/* FP > SP + frame_size. This may be because
}
}
}
- /* move $30,$sp. With different versions of gas this will be either
- `addu $30,$sp,$zero' or `or $30,$sp,$zero' or `daddu 30,sp,$0'.
- Accept any one of these. */
+ /* move $30,$sp. With different versions of gas this will be either
+ `addu $30,$sp,$zero' or `or $30,$sp,$zero' or `daddu 30,sp,$0'.
+ Accept any one of these. */
else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d)
{
/* New gcc frame, virtual frame pointer is at r30 + frame_size. */
{
unsigned alloca_adjust;
PROC_FRAME_REG (&temp_proc_desc) = 30;
- frame_addr = read_next_frame_reg(next_frame, 30);
- alloca_adjust = (unsigned)(frame_addr - sp);
+ frame_addr = read_next_frame_reg (next_frame, 30);
+ alloca_adjust = (unsigned) (frame_addr - sp);
if (alloca_adjust > 0)
{
/* FP > SP + frame_size. This may be because
}
}
}
- else if ((high_word & 0xFFE0) == 0xafc0) /* sw reg,offset($30) */
+ else if ((high_word & 0xFFE0) == 0xafc0) /* sw reg,offset($30) */
{
- PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
- temp_saved_regs.regs[reg] = frame_addr + low_word;
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (reg, frame_addr + low_word);
}
}
}
static mips_extra_func_info_t
-heuristic_proc_desc(start_pc, limit_pc, next_frame)
- CORE_ADDR start_pc, limit_pc;
- struct frame_info *next_frame;
+heuristic_proc_desc (start_pc, limit_pc, next_frame)
+ CORE_ADDR start_pc, limit_pc;
+ struct frame_info *next_frame;
{
CORE_ADDR sp = read_next_frame_reg (next_frame, SP_REGNUM);
- if (start_pc == 0) return NULL;
- memset (&temp_proc_desc, '\0', sizeof(temp_proc_desc));
- memset (&temp_saved_regs, '\0', sizeof(struct frame_saved_regs));
+ if (start_pc == 0)
+ return NULL;
+ memset (&temp_proc_desc, '\0', sizeof (temp_proc_desc));
+ memset (&temp_saved_regs, '\0', SIZEOF_FRAME_SAVED_REGS);
PROC_LOW_ADDR (&temp_proc_desc) = start_pc;
PROC_FRAME_REG (&temp_proc_desc) = SP_REGNUM;
PROC_PC_REG (&temp_proc_desc) = RA_REGNUM;
{
CORE_ADDR startaddr;
mips_extra_func_info_t proc_desc;
- struct block *b = block_for_pc(pc);
+ struct block *b = block_for_pc (pc);
struct symbol *sym;
find_pc_partial_function (pc, NULL, &startaddr, NULL);
{
struct symtab_and_line val;
struct symbol *proc_symbol =
- PROC_DESC_IS_DUMMY(proc_desc) ? 0 : PROC_SYMBOL(proc_desc);
+ PROC_DESC_IS_DUMMY (proc_desc) ? 0 : PROC_SYMBOL (proc_desc);
if (proc_symbol)
{
val = find_pc_line (BLOCK_START
- (SYMBOL_BLOCK_VALUE(proc_symbol)),
+ (SYMBOL_BLOCK_VALUE (proc_symbol)),
0);
val.pc = val.end ? val.end : pc;
}
if (!proc_symbol || pc < val.pc)
{
mips_extra_func_info_t found_heuristic =
- heuristic_proc_desc (PROC_LOW_ADDR (proc_desc),
- pc, next_frame);
+ heuristic_proc_desc (PROC_LOW_ADDR (proc_desc),
+ pc, next_frame);
if (found_heuristic)
proc_desc = found_heuristic;
}
else
{
/* Is linked_proc_desc_table really necessary? It only seems to be used
- by procedure call dummys. However, the procedures being called ought
- to have their own proc_descs, and even if they don't,
- heuristic_proc_desc knows how to create them! */
+ by procedure call dummys. However, the procedures being called ought
+ to have their own proc_descs, and even if they don't,
+ heuristic_proc_desc knows how to create them! */
register struct linked_proc_info *link;
for (link = linked_proc_desc_table; link; link = link->next)
- if (PROC_LOW_ADDR(&link->info) <= pc
- && PROC_HIGH_ADDR(&link->info) > pc)
+ if (PROC_LOW_ADDR (&link->info) <= pc
+ && PROC_HIGH_ADDR (&link->info) > pc)
return &link->info;
if (startaddr == 0)
}
static CORE_ADDR
-get_frame_pointer(frame, proc_desc)
- struct frame_info *frame;
- mips_extra_func_info_t proc_desc;
+get_frame_pointer (frame, proc_desc)
+ struct frame_info *frame;
+ mips_extra_func_info_t proc_desc;
{
- return ADDR_BITS_REMOVE (read_next_frame_reg (frame,
- PROC_FRAME_REG(proc_desc)) + PROC_FRAME_OFFSET(proc_desc));
+ return ADDR_BITS_REMOVE (
+ read_next_frame_reg (frame, PROC_FRAME_REG (proc_desc)) +
+ PROC_FRAME_OFFSET (proc_desc) - PROC_FRAME_ADJUST (proc_desc));
}
mips_extra_func_info_t cached_proc_desc;
CORE_ADDR
-mips_frame_chain(frame)
- struct frame_info *frame;
+mips_frame_chain (frame)
+ struct frame_info *frame;
{
mips_extra_func_info_t proc_desc;
CORE_ADDR tmp;
- CORE_ADDR saved_pc = FRAME_SAVED_PC(frame);
+ CORE_ADDR saved_pc = FRAME_SAVED_PC (frame);
if (saved_pc == 0 || inside_entry_file (saved_pc))
return 0;
saved_pc = tmp;
/* Look up the procedure descriptor for this PC. */
- proc_desc = find_proc_desc(saved_pc, frame);
+ proc_desc = find_proc_desc (saved_pc, frame);
if (!proc_desc)
return 0;
we loop forever if we see a zero size frame. */
if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
&& PROC_FRAME_OFFSET (proc_desc) == 0
- /* The previous frame from a sigtramp frame might be frameless
- and have frame size zero. */
+ /* The previous frame from a sigtramp frame might be frameless
+ and have frame size zero. */
&& !frame->signal_handler_caller)
return 0;
else
}
void
-init_extra_frame_info(fci)
+mips_init_extra_frame_info (fromleaf, fci)
+ int fromleaf;
struct frame_info *fci;
{
int regnum;
/* Use proc_desc calculated in frame_chain */
mips_extra_func_info_t proc_desc =
- fci->next ? cached_proc_desc : find_proc_desc(fci->pc, fci->next);
+ fci->next ? cached_proc_desc : find_proc_desc (fci->pc, fci->next);
+
+ fci->extra_info = (struct frame_extra_info *)
+ frame_obstack_alloc (sizeof (struct frame_extra_info));
fci->saved_regs = NULL;
- fci->proc_desc =
+ fci->extra_info->proc_desc =
proc_desc == &temp_proc_desc ? 0 : proc_desc;
if (proc_desc)
{
/* Fixup frame-pointer - only needed for top frame */
/* This may not be quite right, if proc has a real frame register.
- Get the value of the frame relative sp, procedure might have been
- interrupted by a signal at it's very start. */
+ Get the value of the frame relative sp, procedure might have been
+ interrupted by a signal at it's very start. */
if (fci->pc == PROC_LOW_ADDR (proc_desc)
&& !PROC_DESC_IS_DUMMY (proc_desc))
fci->frame = read_next_frame_reg (fci->next, SP_REGNUM);
mips_find_saved_registers will do that for us.
We can't use fci->signal_handler_caller, it is not yet set. */
find_pc_partial_function (fci->pc, &name,
- (CORE_ADDR *)NULL,(CORE_ADDR *)NULL);
+ (CORE_ADDR *) NULL, (CORE_ADDR *) NULL);
if (!IN_SIGTRAMP (fci->pc, name))
{
- fci->saved_regs = (struct frame_saved_regs*)
- obstack_alloc (&frame_cache_obstack,
- sizeof (struct frame_saved_regs));
- *fci->saved_regs = temp_saved_regs;
- fci->saved_regs->regs[PC_REGNUM]
- = fci->saved_regs->regs[RA_REGNUM];
+ frame_saved_regs_zalloc (fci);
+ memcpy (fci->saved_regs, temp_saved_regs, SIZEOF_FRAME_SAVED_REGS);
+ fci->saved_regs[PC_REGNUM]
+ = fci->saved_regs[RA_REGNUM];
}
}
/* hack: if argument regs are saved, guess these contain args */
- fci->num_args = -1; /* assume we can't tell how many args for now */
+ /* assume we can't tell how many args for now */
+ fci->extra_info->num_args = -1;
for (regnum = MIPS_LAST_ARG_REGNUM; regnum >= A0_REGNUM; regnum--)
{
- if (PROC_REG_MASK(proc_desc) & (1 << regnum))
+ if (PROC_REG_MASK (proc_desc) & (1 << regnum))
{
- fci->num_args = regnum - A0_REGNUM + 1;
+ fci->extra_info->num_args = regnum - A0_REGNUM + 1;
break;
}
- }
+ }
}
}
}
CORE_ADDR
-mips_push_arguments(nargs, args, sp, struct_return, struct_addr)
+mips_push_arguments (nargs, args, sp, struct_return, struct_addr)
int nargs;
value_ptr *args;
CORE_ADDR sp;
a power of two. */
#define ROUND_DOWN(n,a) ((n) & ~((a)-1))
#define ROUND_UP(n,a) (((n)+(a)-1) & ~((a)-1))
-
+
/* First ensure that the stack and structure return address (if any)
- are properly aligned. The stack has to be 64-bit aligned even
- on 32-bit machines, because doubles must be 64-bit aligned. */
- sp = ROUND_DOWN (sp, 8);
- struct_addr = ROUND_DOWN (struct_addr, MIPS_REGSIZE);
-
+ are properly aligned. The stack has to be at least 64-bit aligned
+ even on 32-bit machines, because doubles must be 64-bit aligned.
+ On at least one MIPS variant, stack frames need to be 128-bit
+ aligned, so we round to this widest known alignment. */
+ sp = ROUND_DOWN (sp, 16);
+ struct_addr = ROUND_DOWN (struct_addr, MIPS_SAVED_REGSIZE);
+
/* Now make space on the stack for the args. We allocate more
than necessary for EABI, because the first few arguments are
passed in registers, but that's OK. */
for (argnum = 0; argnum < nargs; argnum++)
- len += ROUND_UP (TYPE_LENGTH(VALUE_TYPE(args[argnum])), MIPS_REGSIZE);
- sp -= ROUND_UP (len, 8);
+ len += ROUND_UP (TYPE_LENGTH (VALUE_TYPE (args[argnum])), MIPS_SAVED_REGSIZE);
+ sp -= ROUND_UP (len, 16);
+
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, "mips_push_arguments: sp=0x%lx allocated %d\n",
+ (long) sp, ROUND_UP (len, 16));
/* Initialize the integer and float register pointers. */
argreg = A0_REGNUM;
/* the struct_return pointer occupies the first parameter-passing reg */
if (struct_return)
+ {
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_push_arguments: struct_return at r%d 0x%lx\n",
+ argreg, (long) struct_addr);
write_register (argreg++, struct_addr);
+ }
/* Now load as many as possible of the first arguments into
registers, and push the rest onto the stack. Loop thru args
for (argnum = 0; argnum < nargs; argnum++)
{
char *val;
- char valbuf[REGISTER_RAW_SIZE(A0_REGNUM)];
+ char valbuf[MAX_REGISTER_RAW_SIZE];
value_ptr arg = args[argnum];
struct type *arg_type = check_typedef (VALUE_TYPE (arg));
int len = TYPE_LENGTH (arg_type);
enum type_code typecode = TYPE_CODE (arg_type);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_push_arguments: %d len=%d type=%d",
+ argnum, len, (int) typecode);
+
/* The EABI passes structures that do not fit in a register by
- reference. In all other cases, pass the structure by value. */
- if (MIPS_EABI && len > MIPS_REGSIZE &&
- (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION))
+ reference. In all other cases, pass the structure by value. */
+ if (MIPS_EABI
+ && len > MIPS_SAVED_REGSIZE
+ && (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION))
{
- store_address (valbuf, MIPS_REGSIZE, VALUE_ADDRESS (arg));
+ store_address (valbuf, MIPS_SAVED_REGSIZE, VALUE_ADDRESS (arg));
typecode = TYPE_CODE_PTR;
- len = MIPS_REGSIZE;
+ len = MIPS_SAVED_REGSIZE;
val = valbuf;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " push");
}
else
- val = (char *)VALUE_CONTENTS (arg);
+ val = (char *) VALUE_CONTENTS (arg);
/* 32-bit ABIs always start floating point arguments in an
even-numbered floating point register. */
- if (!GDB_TARGET_IS_MIPS64 && typecode == TYPE_CODE_FLT
- && (float_argreg & 1))
+ if (!FP_REGISTER_DOUBLE && typecode == TYPE_CODE_FLT
+ && (float_argreg & 1))
float_argreg++;
/* Floating point arguments passed in registers have to be
treated specially. On 32-bit architectures, doubles
- are passed in register pairs; the even register gets
- the low word, and the odd register gets the high word.
- On non-EABI processors, the first two floating point arguments are
- also copied to general registers, because MIPS16 functions
- don't use float registers for arguments. This duplication of
- arguments in general registers can't hurt non-MIPS16 functions
- because those registers are normally skipped. */
- if (typecode == TYPE_CODE_FLT
+ are passed in register pairs; the even register gets
+ the low word, and the odd register gets the high word.
+ On non-EABI processors, the first two floating point arguments are
+ also copied to general registers, because MIPS16 functions
+ don't use float registers for arguments. This duplication of
+ arguments in general registers can't hurt non-MIPS16 functions
+ because those registers are normally skipped. */
+ /* MIPS_EABI squeeses a struct that contains a single floating
+ point value into an FP register instead of pusing it onto the
+ stack. */
+ if ((typecode == TYPE_CODE_FLT
+ || (MIPS_EABI
+ && (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION)
+ && TYPE_NFIELDS (arg_type) == 1
+ && TYPE_CODE (TYPE_FIELD_TYPE (arg_type, 0)) == TYPE_CODE_FLT))
&& float_argreg <= MIPS_LAST_FP_ARG_REGNUM
- && mips_fpu != MIPS_FPU_NONE)
+ && MIPS_FPU_TYPE != MIPS_FPU_NONE)
{
- if (!GDB_TARGET_IS_MIPS64 && len == 8)
+ if (!FP_REGISTER_DOUBLE && len == 8)
{
int low_offset = TARGET_BYTE_ORDER == BIG_ENDIAN ? 4 : 0;
unsigned long regval;
/* Write the low word of the double to the even register(s). */
- regval = extract_unsigned_integer (val+low_offset, 4);
+ regval = extract_unsigned_integer (val + low_offset, 4);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " fpreg=%d val=%s",
+ float_argreg, phex (regval, 4));
write_register (float_argreg++, regval);
if (!MIPS_EABI)
- write_register (argreg+1, regval);
+ {
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " reg=%d val=%s",
+ argreg, phex (regval, 4));
+ write_register (argreg++, regval);
+ }
/* Write the high word of the double to the odd register(s). */
- regval = extract_unsigned_integer (val+4-low_offset, 4);
+ regval = extract_unsigned_integer (val + 4 - low_offset, 4);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " fpreg=%d val=%s",
+ float_argreg, phex (regval, 4));
write_register (float_argreg++, regval);
if (!MIPS_EABI)
- {
- write_register (argreg, regval);
- argreg += 2;
+ {
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " reg=%d val=%s",
+ argreg, phex (regval, 4));
+ write_register (argreg++, regval);
}
}
{
/* This is a floating point value that fits entirely
in a single register. */
- CORE_ADDR regval = extract_address (val, len);
+ /* On 32 bit ABI's the float_argreg is further adjusted
+ above to ensure that it is even register aligned. */
+ LONGEST regval = extract_unsigned_integer (val, len);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " fpreg=%d val=%s",
+ float_argreg, phex (regval, len));
write_register (float_argreg++, regval);
if (!MIPS_EABI)
- {
+ {
+ /* CAGNEY: 32 bit MIPS ABI's always reserve two FP
+ registers for each argument. The below is (my
+ guess) to ensure that the corresponding integer
+ register has reserved the same space. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " reg=%d val=%s",
+ argreg, phex (regval, len));
write_register (argreg, regval);
- argreg += GDB_TARGET_IS_MIPS64 ? 1 : 2;
+ argreg += FP_REGISTER_DOUBLE ? 1 : 2;
}
}
}
where gcc sometimes puts them on the stack. For maximum
compatibility, we will put them in both places. */
- int odd_sized_struct = ((len > MIPS_REGSIZE) &&
- (len % MIPS_REGSIZE != 0));
+ int odd_sized_struct = ((len > MIPS_SAVED_REGSIZE) &&
+ (len % MIPS_SAVED_REGSIZE != 0));
while (len > 0)
{
- int partial_len = len < MIPS_REGSIZE ? len : MIPS_REGSIZE;
+ int partial_len = len < MIPS_SAVED_REGSIZE ? len : MIPS_SAVED_REGSIZE;
if (argreg > MIPS_LAST_ARG_REGNUM || odd_sized_struct)
{
/* Write this portion of the argument to the stack. */
- int longword_offset;
+ /* Should shorter than int integer values be
+ promoted to int before being stored? */
- longword_offset = 0;
+ int longword_offset = 0;
+ CORE_ADDR addr;
if (TARGET_BYTE_ORDER == BIG_ENDIAN)
- if (MIPS_REGSIZE == 8 &&
- (typecode == TYPE_CODE_INT ||
- typecode == TYPE_CODE_PTR ||
- typecode == TYPE_CODE_FLT) && len <= 4)
- longword_offset = 4;
- else if ((typecode == TYPE_CODE_STRUCT ||
- typecode == TYPE_CODE_UNION) &&
- TYPE_LENGTH (arg_type) < MIPS_REGSIZE)
- longword_offset = MIPS_REGSIZE - len;
-
- write_memory (sp + stack_offset + longword_offset,
- val, partial_len);
+ {
+ if (MIPS_STACK_ARGSIZE == 8 &&
+ (typecode == TYPE_CODE_INT ||
+ typecode == TYPE_CODE_PTR ||
+ typecode == TYPE_CODE_FLT) && len <= 4)
+ longword_offset = MIPS_STACK_ARGSIZE - len;
+ else if ((typecode == TYPE_CODE_STRUCT ||
+ typecode == TYPE_CODE_UNION) &&
+ TYPE_LENGTH (arg_type) < MIPS_STACK_ARGSIZE)
+ longword_offset = MIPS_STACK_ARGSIZE - len;
+ }
+
+ if (mips_debug)
+ {
+ fprintf_unfiltered (gdb_stdlog, " stack_offset=0x%lx",
+ (long) stack_offset);
+ fprintf_unfiltered (gdb_stdlog, " longword_offset=0x%lx",
+ (long) longword_offset);
+ }
+
+ addr = sp + stack_offset + longword_offset;
+
+ if (mips_debug)
+ {
+ int i;
+ fprintf_unfiltered (gdb_stdlog, " @0x%lx ", (long) addr);
+ for (i = 0; i < partial_len; i++)
+ {
+ fprintf_unfiltered (gdb_stdlog, "%02x", val[i] & 0xff);
+ }
+ }
+ write_memory (addr, val, partial_len);
}
/* Note!!! This is NOT an else clause.
- Odd sized structs may go thru BOTH paths. */
+ Odd sized structs may go thru BOTH paths. */
if (argreg <= MIPS_LAST_ARG_REGNUM)
{
- CORE_ADDR regval = extract_address (val, partial_len);
+ LONGEST regval = extract_unsigned_integer (val, partial_len);
/* A non-floating-point argument being passed in a
general register. If a struct or union, and if
- small enough for a single register, we have to
- adjust the alignment.
+ the remaining length is smaller than the register
+ size, we have to adjust the register value on
+ big endian targets.
It does not seem to be necessary to do the
same for integral types.
- Also don't do this adjustment on EABI targets. */
+ Also don't do this adjustment on EABI and O64
+ binaries. */
- if (!MIPS_EABI &&
- TYPE_LENGTH (arg_type) < MIPS_REGSIZE &&
- (typecode == TYPE_CODE_STRUCT ||
- typecode == TYPE_CODE_UNION))
- regval <<= ((MIPS_REGSIZE - partial_len) *
+ if (!MIPS_EABI
+ && MIPS_SAVED_REGSIZE < 8
+ && TARGET_BYTE_ORDER == BIG_ENDIAN
+ && partial_len < MIPS_SAVED_REGSIZE
+ && (typecode == TYPE_CODE_STRUCT ||
+ typecode == TYPE_CODE_UNION))
+ regval <<= ((MIPS_SAVED_REGSIZE - partial_len) *
TARGET_CHAR_BIT);
+ if (mips_debug)
+ fprintf_filtered (gdb_stdlog, " reg=%d val=%s",
+ argreg,
+ phex (regval, MIPS_SAVED_REGSIZE));
write_register (argreg, regval);
argreg++;
-
+
/* If this is the old ABI, prevent subsequent floating
point arguments from being passed in floating point
registers. */
if (!MIPS_EABI)
float_argreg = MIPS_LAST_FP_ARG_REGNUM + 1;
}
-
+
len -= partial_len;
val += partial_len;
/* The offset onto the stack at which we will start
- copying parameters (after the registers are used up)
- begins at (4 * MIPS_REGSIZE) in the old ABI. This
- leaves room for the "home" area for register parameters.
-
- In the new EABI, the 8 register parameters do not
- have "home" stack space reserved for them, so the
- stack offset does not get incremented until after
- we have used up the 8 parameter registers. */
- if (!(MIPS_EABI && argnum < 8))
- stack_offset += ROUND_UP (partial_len, MIPS_REGSIZE);
+ copying parameters (after the registers are used up)
+ begins at (4 * MIPS_REGSIZE) in the old ABI. This
+ leaves room for the "home" area for register parameters.
+
+ In the new EABI (and the NABI32), the 8 register parameters
+ do not have "home" stack space reserved for them, so the
+ stack offset does not get incremented until after
+ we have used up the 8 parameter registers. */
+
+ if (MIPS_REGS_HAVE_HOME_P || argnum >= 8)
+ stack_offset += ROUND_UP (partial_len, MIPS_STACK_ARGSIZE);
}
}
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, "\n");
}
+ /* Return adjusted stack pointer. */
+ return sp;
+}
+
+CORE_ADDR
+mips_push_return_address (pc, sp)
+ CORE_ADDR pc;
+ CORE_ADDR sp;
+{
/* Set the return address register to point to the entry
point of the program, where a breakpoint lies in wait. */
- write_register (RA_REGNUM, CALL_DUMMY_ADDRESS());
-
- /* Return adjusted stack pointer. */
+ write_register (RA_REGNUM, CALL_DUMMY_ADDRESS ());
return sp;
}
static void
-mips_push_register(CORE_ADDR *sp, int regno)
+mips_push_register (CORE_ADDR * sp, int regno)
{
char buffer[MAX_REGISTER_RAW_SIZE];
- int regsize = REGISTER_RAW_SIZE (regno);
-
+ int regsize;
+ int offset;
+ if (MIPS_SAVED_REGSIZE < REGISTER_RAW_SIZE (regno))
+ {
+ regsize = MIPS_SAVED_REGSIZE;
+ offset = (TARGET_BYTE_ORDER == BIG_ENDIAN
+ ? REGISTER_RAW_SIZE (regno) - MIPS_SAVED_REGSIZE
+ : 0);
+ }
+ else
+ {
+ regsize = REGISTER_RAW_SIZE (regno);
+ offset = 0;
+ }
*sp -= regsize;
read_register_gen (regno, buffer);
- write_memory (*sp, buffer, regsize);
+ write_memory (*sp, buffer + offset, regsize);
}
/* MASK(i,j) == (1<<i) + (1<<(i+1)) + ... + (1<<j)). Assume i<=j<(MIPS_NUMREGS-1). */
#define MASK(i,j) (((1 << ((j)+1))-1) ^ ((1 << (i))-1))
void
-mips_push_dummy_frame()
+mips_push_dummy_frame ()
{
int ireg;
- struct linked_proc_info *link = (struct linked_proc_info*)
- xmalloc(sizeof(struct linked_proc_info));
+ struct linked_proc_info *link = (struct linked_proc_info *)
+ xmalloc (sizeof (struct linked_proc_info));
mips_extra_func_info_t proc_desc = &link->info;
CORE_ADDR sp = ADDR_BITS_REMOVE (read_register (SP_REGNUM));
CORE_ADDR old_sp = sp;
linked_proc_desc_table = link;
/* FIXME! are these correct ? */
-#define PUSH_FP_REGNUM 16 /* must be a register preserved across calls */
+#define PUSH_FP_REGNUM 16 /* must be a register preserved across calls */
#define GEN_REG_SAVE_MASK MASK(1,16)|MASK(24,28)|(1<<(MIPS_NUMREGS-1))
#define FLOAT_REG_SAVE_MASK MASK(0,19)
#define FLOAT_SINGLE_REG_SAVE_MASK \
*
* Dummy frame layout:
* (high memory)
- * Saved PC
- * Saved MMHI, MMLO, FPC_CSR
- * Saved R31
- * Saved R28
- * ...
- * Saved R1
+ * Saved PC
+ * Saved MMHI, MMLO, FPC_CSR
+ * Saved R31
+ * Saved R28
+ * ...
+ * Saved R1
* Saved D18 (i.e. F19, F18)
* ...
* Saved D0 (i.e. F1, F0)
- * Argument build area and stack arguments written via mips_push_arguments
+ * Argument build area and stack arguments written via mips_push_arguments
* (low memory)
*/
/* Save special registers (PC, MMHI, MMLO, FPC_CSR) */
- PROC_FRAME_REG(proc_desc) = PUSH_FP_REGNUM;
- PROC_FRAME_OFFSET(proc_desc) = 0;
+ PROC_FRAME_REG (proc_desc) = PUSH_FP_REGNUM;
+ PROC_FRAME_OFFSET (proc_desc) = 0;
+ PROC_FRAME_ADJUST (proc_desc) = 0;
mips_push_register (&sp, PC_REGNUM);
mips_push_register (&sp, HI_REGNUM);
mips_push_register (&sp, LO_REGNUM);
- mips_push_register (&sp, mips_fpu == MIPS_FPU_NONE ? 0 : FCRCS_REGNUM);
+ mips_push_register (&sp, MIPS_FPU_TYPE == MIPS_FPU_NONE ? 0 : FCRCS_REGNUM);
/* Save general CPU registers */
- PROC_REG_MASK(proc_desc) = GEN_REG_SAVE_MASK;
- PROC_REG_OFFSET(proc_desc) = sp - old_sp; /* offset of (Saved R31) from FP */
- for (ireg = 32; --ireg >= 0; )
- if (PROC_REG_MASK(proc_desc) & (1 << ireg))
+ PROC_REG_MASK (proc_desc) = GEN_REG_SAVE_MASK;
+ /* PROC_REG_OFFSET is the offset of the first saved register from FP. */
+ PROC_REG_OFFSET (proc_desc) = sp - old_sp - MIPS_SAVED_REGSIZE;
+ for (ireg = 32; --ireg >= 0;)
+ if (PROC_REG_MASK (proc_desc) & (1 << ireg))
mips_push_register (&sp, ireg);
/* Save floating point registers starting with high order word */
- PROC_FREG_MASK(proc_desc) =
- mips_fpu == MIPS_FPU_DOUBLE ? FLOAT_REG_SAVE_MASK
- : mips_fpu == MIPS_FPU_SINGLE ? FLOAT_SINGLE_REG_SAVE_MASK : 0;
- PROC_FREG_OFFSET(proc_desc) = sp - old_sp; /* offset of (Saved D18) from FP */
- for (ireg = 32; --ireg >= 0; )
- if (PROC_FREG_MASK(proc_desc) & (1 << ireg))
+ PROC_FREG_MASK (proc_desc) =
+ MIPS_FPU_TYPE == MIPS_FPU_DOUBLE ? FLOAT_REG_SAVE_MASK
+ : MIPS_FPU_TYPE == MIPS_FPU_SINGLE ? FLOAT_SINGLE_REG_SAVE_MASK : 0;
+ /* PROC_FREG_OFFSET is the offset of the first saved *double* register
+ from FP. */
+ PROC_FREG_OFFSET (proc_desc) = sp - old_sp - 8;
+ for (ireg = 32; --ireg >= 0;)
+ if (PROC_FREG_MASK (proc_desc) & (1 << ireg))
mips_push_register (&sp, ireg + FP0_REGNUM);
/* Update the frame pointer for the call dummy and the stack pointer.
call dummy address at the entry point. */
write_register (PUSH_FP_REGNUM, old_sp);
write_register (SP_REGNUM, sp);
- PROC_LOW_ADDR(proc_desc) = CALL_DUMMY_ADDRESS();
- PROC_HIGH_ADDR(proc_desc) = CALL_DUMMY_ADDRESS() + 4;
- SET_PROC_DESC_IS_DUMMY(proc_desc);
- PROC_PC_REG(proc_desc) = RA_REGNUM;
+ PROC_LOW_ADDR (proc_desc) = CALL_DUMMY_ADDRESS ();
+ PROC_HIGH_ADDR (proc_desc) = CALL_DUMMY_ADDRESS () + 4;
+ SET_PROC_DESC_IS_DUMMY (proc_desc);
+ PROC_PC_REG (proc_desc) = RA_REGNUM;
}
void
-mips_pop_frame()
+mips_pop_frame ()
{
register int regnum;
struct frame_info *frame = get_current_frame ();
CORE_ADDR new_sp = FRAME_FP (frame);
- mips_extra_func_info_t proc_desc = frame->proc_desc;
+ mips_extra_func_info_t proc_desc = frame->extra_info->proc_desc;
- write_register (PC_REGNUM, FRAME_SAVED_PC(frame));
+ write_register (PC_REGNUM, FRAME_SAVED_PC (frame));
if (frame->saved_regs == NULL)
mips_find_saved_regs (frame);
for (regnum = 0; regnum < NUM_REGS; regnum++)
{
if (regnum != SP_REGNUM && regnum != PC_REGNUM
- && frame->saved_regs->regs[regnum])
+ && frame->saved_regs[regnum])
write_register (regnum,
- read_memory_integer (frame->saved_regs->regs[regnum],
- MIPS_REGSIZE));
+ read_memory_integer (frame->saved_regs[regnum],
+ MIPS_SAVED_REGSIZE));
}
write_register (SP_REGNUM, new_sp);
flush_cached_frames ();
- if (proc_desc && PROC_DESC_IS_DUMMY(proc_desc))
+ if (proc_desc && PROC_DESC_IS_DUMMY (proc_desc))
{
struct linked_proc_info *pi_ptr, *prev_ptr;
free (pi_ptr);
write_register (HI_REGNUM,
- read_memory_integer (new_sp - 2*MIPS_REGSIZE, MIPS_REGSIZE));
+ read_memory_integer (new_sp - 2 * MIPS_SAVED_REGSIZE,
+ MIPS_SAVED_REGSIZE));
write_register (LO_REGNUM,
- read_memory_integer (new_sp - 3*MIPS_REGSIZE, MIPS_REGSIZE));
- if (mips_fpu != MIPS_FPU_NONE)
+ read_memory_integer (new_sp - 3 * MIPS_SAVED_REGSIZE,
+ MIPS_SAVED_REGSIZE));
+ if (MIPS_FPU_TYPE != MIPS_FPU_NONE)
write_register (FCRCS_REGNUM,
- read_memory_integer (new_sp - 4*MIPS_REGSIZE, MIPS_REGSIZE));
+ read_memory_integer (new_sp - 4 * MIPS_SAVED_REGSIZE,
+ MIPS_SAVED_REGSIZE));
}
}
/* Get the data in raw format. */
if (read_relative_register_raw_bytes (regnum, raw_buffer))
{
- printf_filtered ("%s: [Invalid]", reg_names[regnum]);
+ printf_filtered ("%s: [Invalid]", REGISTER_NAME (regnum));
return;
}
/* If an even floating point register, also print as double. */
if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT
- && !((regnum-FP0_REGNUM) & 1))
- if (REGISTER_RAW_SIZE(regnum) == 4) /* this would be silly on MIPS64 */
+ && !((regnum - FP0_REGNUM) & 1))
+ if (REGISTER_RAW_SIZE (regnum) == 4) /* this would be silly on MIPS64 or N32 (Irix 6) */
{
- char dbuffer[2 * MAX_REGISTER_RAW_SIZE];
+ char dbuffer[2 * MAX_REGISTER_RAW_SIZE];
read_relative_register_raw_bytes (regnum, dbuffer);
- read_relative_register_raw_bytes (regnum+1, dbuffer+MIPS_REGSIZE);
+ read_relative_register_raw_bytes (regnum + 1, dbuffer + MIPS_REGSIZE);
REGISTER_CONVERT_TO_TYPE (regnum, builtin_type_double, dbuffer);
- printf_filtered ("(d%d: ", regnum-FP0_REGNUM);
- val_print (builtin_type_double, dbuffer, 0,
+ printf_filtered ("(d%d: ", regnum - FP0_REGNUM);
+ val_print (builtin_type_double, dbuffer, 0, 0,
gdb_stdout, 0, 1, 0, Val_pretty_default);
printf_filtered ("); ");
}
- fputs_filtered (reg_names[regnum], gdb_stdout);
+ fputs_filtered (REGISTER_NAME (regnum), gdb_stdout);
/* The problem with printing numeric register names (r26, etc.) is that
the user can't use them on input. Probably the best solution is to
/* If virtual format is floating, print it that way. */
if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
- if (REGISTER_RAW_SIZE(regnum) == 8)
- { /* show 8-byte floats as float AND double: */
+ if (FP_REGISTER_DOUBLE)
+ { /* show 8-byte floats as float AND double: */
int offset = 4 * (TARGET_BYTE_ORDER == BIG_ENDIAN);
printf_filtered (" (float) ");
- val_print (builtin_type_float, raw_buffer + offset, 0,
+ val_print (builtin_type_float, raw_buffer + offset, 0, 0,
gdb_stdout, 0, 1, 0, Val_pretty_default);
printf_filtered (", (double) ");
- val_print (builtin_type_double, raw_buffer, 0,
+ val_print (builtin_type_double, raw_buffer, 0, 0,
gdb_stdout, 0, 1, 0, Val_pretty_default);
}
else
- val_print (REGISTER_VIRTUAL_TYPE (regnum), raw_buffer, 0,
+ val_print (REGISTER_VIRTUAL_TYPE (regnum), raw_buffer, 0, 0,
gdb_stdout, 0, 1, 0, Val_pretty_default);
/* Else print as integer in hex. */
else
- print_scalar_formatted (raw_buffer, REGISTER_VIRTUAL_TYPE (regnum),
- 'x', 0, gdb_stdout);
+ {
+ int offset;
+
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ offset = REGISTER_RAW_SIZE (regnum) - REGISTER_VIRTUAL_SIZE (regnum);
+ else
+ offset = 0;
+
+ print_scalar_formatted (raw_buffer + offset,
+ REGISTER_VIRTUAL_TYPE (regnum),
+ 'x', 0, gdb_stdout);
+ }
}
/* Replacement for generic do_registers_info.
static int
do_fp_register_row (regnum)
int regnum;
-{ /* do values for FP (float) regs */
- char raw_buffer[2] [REGISTER_RAW_SIZE(FP0_REGNUM)];
- char dbl_buffer[2 * REGISTER_RAW_SIZE(FP0_REGNUM)];
+{ /* do values for FP (float) regs */
+ char *raw_buffer[2];
+ char *dbl_buffer;
/* use HI and LO to control the order of combining two flt regs */
int HI = (TARGET_BYTE_ORDER == BIG_ENDIAN);
int LO = (TARGET_BYTE_ORDER != BIG_ENDIAN);
double doub, flt1, flt2; /* doubles extracted from raw hex data */
int inv1, inv2, inv3;
-
+
+ raw_buffer[0] = (char *) alloca (REGISTER_RAW_SIZE (FP0_REGNUM));
+ raw_buffer[1] = (char *) alloca (REGISTER_RAW_SIZE (FP0_REGNUM));
+ dbl_buffer = (char *) alloca (2 * REGISTER_RAW_SIZE (FP0_REGNUM));
+
/* Get the data in raw format. */
if (read_relative_register_raw_bytes (regnum, raw_buffer[HI]))
- error ("can't read register %d (%s)", regnum, reg_names[regnum]);
- if (REGISTER_RAW_SIZE(regnum) == 4)
+ error ("can't read register %d (%s)", regnum, REGISTER_NAME (regnum));
+ if (REGISTER_RAW_SIZE (regnum) == 4)
{
/* 4-byte registers: we can fit two registers per row. */
/* Also print every pair of 4-byte regs as an 8-byte double. */
if (read_relative_register_raw_bytes (regnum + 1, raw_buffer[LO]))
- error ("can't read register %d (%s)",
- regnum + 1, reg_names[regnum + 1]);
+ error ("can't read register %d (%s)",
+ regnum + 1, REGISTER_NAME (regnum + 1));
/* copy the two floats into one double, and unpack both */
- memcpy (dbl_buffer, raw_buffer, sizeof(dbl_buffer));
- flt1 = unpack_double (builtin_type_float, raw_buffer[HI], &inv1);
- flt2 = unpack_double (builtin_type_float, raw_buffer[LO], &inv2);
- doub = unpack_double (builtin_type_double, dbl_buffer, &inv3);
-
- printf_filtered (inv1 ? " %-5s: <invalid float>" :
- " %-5s%-17.9g", reg_names[regnum], flt1);
- printf_filtered (inv2 ? " %-5s: <invalid float>" :
- " %-5s%-17.9g", reg_names[regnum + 1], flt2);
- printf_filtered (inv3 ? " dbl: <invalid double>\n" :
+ memcpy (dbl_buffer, raw_buffer, 2 * REGISTER_RAW_SIZE (FP0_REGNUM));
+ flt1 = unpack_double (builtin_type_float, raw_buffer[HI], &inv1);
+ flt2 = unpack_double (builtin_type_float, raw_buffer[LO], &inv2);
+ doub = unpack_double (builtin_type_double, dbl_buffer, &inv3);
+
+ printf_filtered (inv1 ? " %-5s: <invalid float>" :
+ " %-5s%-17.9g", REGISTER_NAME (regnum), flt1);
+ printf_filtered (inv2 ? " %-5s: <invalid float>" :
+ " %-5s%-17.9g", REGISTER_NAME (regnum + 1), flt2);
+ printf_filtered (inv3 ? " dbl: <invalid double>\n" :
" dbl: %-24.17g\n", doub);
/* may want to do hex display here (future enhancement) */
- regnum +=2;
+ regnum += 2;
}
else
- { /* eight byte registers: print each one as float AND as double. */
+ { /* eight byte registers: print each one as float AND as double. */
int offset = 4 * (TARGET_BYTE_ORDER == BIG_ENDIAN);
- memcpy (dbl_buffer, raw_buffer[HI], sizeof(dbl_buffer));
- flt1 = unpack_double (builtin_type_float,
+ memcpy (dbl_buffer, raw_buffer[HI], 2 * REGISTER_RAW_SIZE (FP0_REGNUM));
+ flt1 = unpack_double (builtin_type_float,
&raw_buffer[HI][offset], &inv1);
- doub = unpack_double (builtin_type_double, dbl_buffer, &inv3);
+ doub = unpack_double (builtin_type_double, dbl_buffer, &inv3);
- printf_filtered (inv1 ? " %-5s: <invalid float>" :
- " %-5s flt: %-17.9g", reg_names[regnum], flt1);
- printf_filtered (inv3 ? " dbl: <invalid double>\n" :
+ printf_filtered (inv1 ? " %-5s: <invalid float>" :
+ " %-5s flt: %-17.9g", REGISTER_NAME (regnum), flt1);
+ printf_filtered (inv3 ? " dbl: <invalid double>\n" :
" dbl: %-24.17g\n", doub);
/* may want to do hex display here (future enhancement) */
regnum++;
static int
do_gp_register_row (regnum)
int regnum;
-{ /* do values for GP (int) regs */
- char raw_buffer[REGISTER_RAW_SIZE(0)];
- int ncols = MIPS_REGSIZE == 8 ? 4 : 8; /* display cols per row */
- int col, byte, start_regnum = regnum;
+{
+ /* do values for GP (int) regs */
+ char raw_buffer[MAX_REGISTER_RAW_SIZE];
+ int ncols = (MIPS_REGSIZE == 8 ? 4 : 8); /* display cols per row */
+ int col, byte;
+ int start_regnum = regnum;
+ int numregs = NUM_REGS;
+
/* For GP registers, we print a separate row of names above the vals */
printf_filtered (" ");
- for (col = 0; col < ncols && regnum < NUM_REGS; regnum++)
+ for (col = 0; col < ncols && regnum < numregs; regnum++)
{
- if (*reg_names[regnum] == '\0')
- continue; /* unused register */
+ if (*REGISTER_NAME (regnum) == '\0')
+ continue; /* unused register */
if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
- break; /* end the row: reached FP register */
- printf_filtered (MIPS_REGSIZE == 8 ? "%17s" : "%9s",
- reg_names[regnum]);
+ break; /* end the row: reached FP register */
+ printf_filtered (MIPS_REGSIZE == 8 ? "%17s" : "%9s",
+ REGISTER_NAME (regnum));
col++;
}
- printf_filtered (start_regnum < MIPS_NUMREGS ? "\n R%-4d" : "\n ",
+ printf_filtered (start_regnum < MIPS_NUMREGS ? "\n R%-4d" : "\n ",
start_regnum); /* print the R0 to R31 names */
regnum = start_regnum; /* go back to start of row */
/* now print the values in hex, 4 or 8 to the row */
- for (col = 0; col < ncols && regnum < NUM_REGS; regnum++)
+ for (col = 0; col < ncols && regnum < numregs; regnum++)
{
- if (*reg_names[regnum] == '\0')
- continue; /* unused register */
+ if (*REGISTER_NAME (regnum) == '\0')
+ continue; /* unused register */
if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
- break; /* end row: reached FP register */
+ break; /* end row: reached FP register */
/* OK: get the data in raw format. */
if (read_relative_register_raw_bytes (regnum, raw_buffer))
- error ("can't read register %d (%s)", regnum, reg_names[regnum]);
+ error ("can't read register %d (%s)", regnum, REGISTER_NAME (regnum));
+ /* pad small registers */
+ for (byte = 0; byte < (MIPS_REGSIZE - REGISTER_VIRTUAL_SIZE (regnum)); byte++)
+ printf_filtered (" ");
/* Now print the register value in hex, endian order. */
if (TARGET_BYTE_ORDER == BIG_ENDIAN)
- for (byte = 0; byte < REGISTER_RAW_SIZE (regnum); byte++)
+ for (byte = REGISTER_RAW_SIZE (regnum) - REGISTER_VIRTUAL_SIZE (regnum);
+ byte < REGISTER_RAW_SIZE (regnum);
+ byte++)
printf_filtered ("%02x", (unsigned char) raw_buffer[byte]);
else
- for (byte = REGISTER_RAW_SIZE (regnum) - 1; byte >= 0; byte--)
+ for (byte = REGISTER_VIRTUAL_SIZE (regnum) - 1;
+ byte >= 0;
+ byte--)
printf_filtered ("%02x", (unsigned char) raw_buffer[byte]);
printf_filtered (" ");
col++;
}
- if (col > 0) /* ie. if we actually printed anything... */
+ if (col > 0) /* ie. if we actually printed anything... */
printf_filtered ("\n");
return regnum;
int regnum;
int fpregs;
{
- if (regnum != -1) /* do one specified register */
+ if (regnum != -1) /* do one specified register */
{
- if (*(reg_names[regnum]) == '\0')
+ if (*(REGISTER_NAME (regnum)) == '\0')
error ("Not a valid register for the current processor type");
mips_print_register (regnum, 0);
printf_filtered ("\n");
}
- else /* do all (or most) registers */
+ else
+ /* do all (or most) registers */
{
regnum = 0;
while (regnum < NUM_REGS)
- if (TYPE_CODE(REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
- if (fpregs) /* true for "INFO ALL-REGISTERS" command */
- regnum = do_fp_register_row (regnum); /* FP regs */
+ {
+ if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
+ if (fpregs) /* true for "INFO ALL-REGISTERS" command */
+ regnum = do_fp_register_row (regnum); /* FP regs */
+ else
+ regnum += MIPS_NUMREGS; /* skip floating point regs */
else
- regnum += MIPS_NUMREGS; /* skip floating point regs */
- else
- regnum = do_gp_register_row (regnum); /* GP (int) regs */
+ regnum = do_gp_register_row (regnum); /* GP (int) regs */
+ }
}
}
int
mips_frame_num_args (frame)
- struct frame_info *frame;
+ struct frame_info *frame;
{
-#if 0 /* FIXME Use or lose this! */
+#if 0 /* FIXME Use or lose this! */
struct chain_info_t *p;
p = mips_find_cached_frame (FRAME_FP (frame));
/* Is this a branch with a delay slot? */
-static int is_delayed PARAMS ((unsigned long));
+static int is_delayed (unsigned long);
static int
is_delayed (insn)
if (target_read_memory (pc, buf, MIPS_INSTLEN) != 0)
/* If error reading memory, guess that it is not a delayed branch. */
return 0;
- return is_delayed ((unsigned long)extract_unsigned_integer (buf, MIPS_INSTLEN));
+ return is_delayed ((unsigned long) extract_unsigned_integer (buf, MIPS_INSTLEN));
}
static CORE_ADDR
mips32_skip_prologue (pc, lenient)
- CORE_ADDR pc; /* starting PC to search from */
+ CORE_ADDR pc; /* starting PC to search from */
int lenient;
{
- t_inst inst;
- CORE_ADDR end_pc;
- int seen_sp_adjust = 0;
- int load_immediate_bytes = 0;
-
- /* Skip the typical prologue instructions. These are the stack adjustment
- instruction and the instructions that save registers on the stack
- or in the gcc frame. */
- for (end_pc = pc + 100; pc < end_pc; pc += MIPS_INSTLEN)
- {
- unsigned long high_word;
+ t_inst inst;
+ CORE_ADDR end_pc;
+ int seen_sp_adjust = 0;
+ int load_immediate_bytes = 0;
+
+ /* Skip the typical prologue instructions. These are the stack adjustment
+ instruction and the instructions that save registers on the stack
+ or in the gcc frame. */
+ for (end_pc = pc + 100; pc < end_pc; pc += MIPS_INSTLEN)
+ {
+ unsigned long high_word;
- inst = mips_fetch_instruction (pc);
- high_word = (inst >> 16) & 0xffff;
+ inst = mips_fetch_instruction (pc);
+ high_word = (inst >> 16) & 0xffff;
#if 0
- if (lenient && is_delayed (inst))
- continue;
+ if (lenient && is_delayed (inst))
+ continue;
#endif
- if (high_word == 0x27bd /* addiu $sp,$sp,offset */
- || high_word == 0x67bd) /* daddiu $sp,$sp,offset */
- seen_sp_adjust = 1;
- else if (inst == 0x03a1e823 || /* subu $sp,$sp,$at */
- inst == 0x03a8e823) /* subu $sp,$sp,$t0 */
- seen_sp_adjust = 1;
- else if (((inst & 0xFFE00000) == 0xAFA00000 /* sw reg,n($sp) */
- || (inst & 0xFFE00000) == 0xFFA00000) /* sd reg,n($sp) */
- && (inst & 0x001F0000)) /* reg != $zero */
- continue;
-
- else if ((inst & 0xFFE00000) == 0xE7A00000) /* swc1 freg,n($sp) */
- continue;
- else if ((inst & 0xF3E00000) == 0xA3C00000 && (inst & 0x001F0000))
- /* sx reg,n($s8) */
- continue; /* reg != $zero */
-
- /* move $s8,$sp. With different versions of gas this will be either
- `addu $s8,$sp,$zero' or `or $s8,$sp,$zero' or `daddu s8,sp,$0'.
- Accept any one of these. */
- else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d)
- continue;
-
- else if ((inst & 0xFF9F07FF) == 0x00800021) /* move reg,$a0-$a3 */
- continue;
- else if (high_word == 0x3c1c) /* lui $gp,n */
- continue;
- else if (high_word == 0x279c) /* addiu $gp,$gp,n */
- continue;
- else if (inst == 0x0399e021 /* addu $gp,$gp,$t9 */
- || inst == 0x033ce021) /* addu $gp,$t9,$gp */
- continue;
- /* The following instructions load $at or $t0 with an immediate
- value in preparation for a stack adjustment via
- subu $sp,$sp,[$at,$t0]. These instructions could also initialize
- a local variable, so we accept them only before a stack adjustment
- instruction was seen. */
- else if (!seen_sp_adjust)
- {
- if (high_word == 0x3c01 || /* lui $at,n */
- high_word == 0x3c08) /* lui $t0,n */
- {
- load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */
- continue;
- }
- else if (high_word == 0x3421 || /* ori $at,$at,n */
- high_word == 0x3508 || /* ori $t0,$t0,n */
- high_word == 0x3401 || /* ori $at,$zero,n */
- high_word == 0x3408) /* ori $t0,$zero,n */
- {
- load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */
- continue;
- }
- else
- break;
- }
- else
- break;
+ if (high_word == 0x27bd /* addiu $sp,$sp,offset */
+ || high_word == 0x67bd) /* daddiu $sp,$sp,offset */
+ seen_sp_adjust = 1;
+ else if (inst == 0x03a1e823 || /* subu $sp,$sp,$at */
+ inst == 0x03a8e823) /* subu $sp,$sp,$t0 */
+ seen_sp_adjust = 1;
+ else if (((inst & 0xFFE00000) == 0xAFA00000 /* sw reg,n($sp) */
+ || (inst & 0xFFE00000) == 0xFFA00000) /* sd reg,n($sp) */
+ && (inst & 0x001F0000)) /* reg != $zero */
+ continue;
+
+ else if ((inst & 0xFFE00000) == 0xE7A00000) /* swc1 freg,n($sp) */
+ continue;
+ else if ((inst & 0xF3E00000) == 0xA3C00000 && (inst & 0x001F0000))
+ /* sx reg,n($s8) */
+ continue; /* reg != $zero */
+
+ /* move $s8,$sp. With different versions of gas this will be either
+ `addu $s8,$sp,$zero' or `or $s8,$sp,$zero' or `daddu s8,sp,$0'.
+ Accept any one of these. */
+ else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d)
+ continue;
+
+ else if ((inst & 0xFF9F07FF) == 0x00800021) /* move reg,$a0-$a3 */
+ continue;
+ else if (high_word == 0x3c1c) /* lui $gp,n */
+ continue;
+ else if (high_word == 0x279c) /* addiu $gp,$gp,n */
+ continue;
+ else if (inst == 0x0399e021 /* addu $gp,$gp,$t9 */
+ || inst == 0x033ce021) /* addu $gp,$t9,$gp */
+ continue;
+ /* The following instructions load $at or $t0 with an immediate
+ value in preparation for a stack adjustment via
+ subu $sp,$sp,[$at,$t0]. These instructions could also initialize
+ a local variable, so we accept them only before a stack adjustment
+ instruction was seen. */
+ else if (!seen_sp_adjust)
+ {
+ if (high_word == 0x3c01 || /* lui $at,n */
+ high_word == 0x3c08) /* lui $t0,n */
+ {
+ load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */
+ continue;
+ }
+ else if (high_word == 0x3421 || /* ori $at,$at,n */
+ high_word == 0x3508 || /* ori $t0,$t0,n */
+ high_word == 0x3401 || /* ori $at,$zero,n */
+ high_word == 0x3408) /* ori $t0,$zero,n */
+ {
+ load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */
+ continue;
+ }
+ else
+ break;
+ }
+ else
+ break;
}
- /* In a frameless function, we might have incorrectly
- skipped some load immediate instructions. Undo the skipping
- if the load immediate was not followed by a stack adjustment. */
- if (load_immediate_bytes && !seen_sp_adjust)
- pc -= load_immediate_bytes;
- return pc;
+ /* In a frameless function, we might have incorrectly
+ skipped some load immediate instructions. Undo the skipping
+ if the load immediate was not followed by a stack adjustment. */
+ if (load_immediate_bytes && !seen_sp_adjust)
+ pc -= load_immediate_bytes;
+ return pc;
}
/* Skip the PC past function prologue instructions (16-bit version).
static CORE_ADDR
mips16_skip_prologue (pc, lenient)
- CORE_ADDR pc; /* starting PC to search from */
+ CORE_ADDR pc; /* starting PC to search from */
int lenient;
{
- CORE_ADDR end_pc;
- int extend_bytes = 0;
- int prev_extend_bytes;
+ CORE_ADDR end_pc;
+ int extend_bytes = 0;
+ int prev_extend_bytes;
- /* Table of instructions likely to be found in a function prologue. */
- static struct
+ /* Table of instructions likely to be found in a function prologue. */
+ static struct
{
unsigned short inst;
unsigned short mask;
- } table[] =
- {
- { 0x6300, 0xff00 }, /* addiu $sp,offset */
- { 0xfb00, 0xff00 }, /* daddiu $sp,offset */
- { 0xd000, 0xf800 }, /* sw reg,n($sp) */
- { 0xf900, 0xff00 }, /* sd reg,n($sp) */
- { 0x6200, 0xff00 }, /* sw $ra,n($sp) */
- { 0xfa00, 0xff00 }, /* sd $ra,n($sp) */
- { 0x673d, 0xffff }, /* move $s1,sp */
- { 0xd980, 0xff80 }, /* sw $a0-$a3,n($s1) */
- { 0x6704, 0xff1c }, /* move reg,$a0-$a3 */
- { 0xe809, 0xf81f }, /* entry pseudo-op */
- { 0x0100, 0xff00 }, /* addiu $s1,$sp,n */
- { 0, 0 } /* end of table marker */
- };
-
- /* Skip the typical prologue instructions. These are the stack adjustment
- instruction and the instructions that save registers on the stack
- or in the gcc frame. */
- for (end_pc = pc + 100; pc < end_pc; pc += MIPS16_INSTLEN)
- {
- unsigned short inst;
- int i;
+ }
+ table[] =
+ {
+ {
+ 0x6300, 0xff00
+ }
+ , /* addiu $sp,offset */
+ {
+ 0xfb00, 0xff00
+ }
+ , /* daddiu $sp,offset */
+ {
+ 0xd000, 0xf800
+ }
+ , /* sw reg,n($sp) */
+ {
+ 0xf900, 0xff00
+ }
+ , /* sd reg,n($sp) */
+ {
+ 0x6200, 0xff00
+ }
+ , /* sw $ra,n($sp) */
+ {
+ 0xfa00, 0xff00
+ }
+ , /* sd $ra,n($sp) */
+ {
+ 0x673d, 0xffff
+ }
+ , /* move $s1,sp */
+ {
+ 0xd980, 0xff80
+ }
+ , /* sw $a0-$a3,n($s1) */
+ {
+ 0x6704, 0xff1c
+ }
+ , /* move reg,$a0-$a3 */
+ {
+ 0xe809, 0xf81f
+ }
+ , /* entry pseudo-op */
+ {
+ 0x0100, 0xff00
+ }
+ , /* addiu $s1,$sp,n */
+ {
+ 0, 0
+ } /* end of table marker */
+ };
+
+ /* Skip the typical prologue instructions. These are the stack adjustment
+ instruction and the instructions that save registers on the stack
+ or in the gcc frame. */
+ for (end_pc = pc + 100; pc < end_pc; pc += MIPS16_INSTLEN)
+ {
+ unsigned short inst;
+ int i;
- inst = mips_fetch_instruction (pc);
+ inst = mips_fetch_instruction (pc);
- /* Normally we ignore an extend instruction. However, if it is
- not followed by a valid prologue instruction, we must adjust
- the pc back over the extend so that it won't be considered
- part of the prologue. */
- if ((inst & 0xf800) == 0xf000) /* extend */
- {
- extend_bytes = MIPS16_INSTLEN;
- continue;
- }
- prev_extend_bytes = extend_bytes;
- extend_bytes = 0;
+ /* Normally we ignore an extend instruction. However, if it is
+ not followed by a valid prologue instruction, we must adjust
+ the pc back over the extend so that it won't be considered
+ part of the prologue. */
+ if ((inst & 0xf800) == 0xf000) /* extend */
+ {
+ extend_bytes = MIPS16_INSTLEN;
+ continue;
+ }
+ prev_extend_bytes = extend_bytes;
+ extend_bytes = 0;
- /* Check for other valid prologue instructions besides extend. */
- for (i = 0; table[i].mask != 0; i++)
- if ((inst & table[i].mask) == table[i].inst) /* found, get out */
- break;
- if (table[i].mask != 0) /* it was in table? */
- continue; /* ignore it */
- else /* non-prologue */
- {
- /* Return the current pc, adjusted backwards by 2 if
- the previous instruction was an extend. */
- return pc - prev_extend_bytes;
- }
+ /* Check for other valid prologue instructions besides extend. */
+ for (i = 0; table[i].mask != 0; i++)
+ if ((inst & table[i].mask) == table[i].inst) /* found, get out */
+ break;
+ if (table[i].mask != 0) /* it was in table? */
+ continue; /* ignore it */
+ else
+ /* non-prologue */
+ {
+ /* Return the current pc, adjusted backwards by 2 if
+ the previous instruction was an extend. */
+ return pc - prev_extend_bytes;
+ }
}
return pc;
}
}
#endif
-/* Given a return value in `regbuf' with a type `valtype',
- extract and copy its value into `valbuf'. */
+/* Determine how a return value is stored within the MIPS register
+ file, given the return type `valtype'. */
+
+struct return_value_word
+{
+ int len;
+ int reg;
+ int reg_offset;
+ int buf_offset;
+};
+
+static void return_value_location (struct type *, struct return_value_word *,
+ struct return_value_word *);
+
+static void
+return_value_location (valtype, hi, lo)
+ struct type *valtype;
+ struct return_value_word *hi;
+ struct return_value_word *lo;
+{
+ int len = TYPE_LENGTH (valtype);
+
+ if (TYPE_CODE (valtype) == TYPE_CODE_FLT
+ && ((MIPS_FPU_TYPE == MIPS_FPU_DOUBLE && (len == 4 || len == 8))
+ || (MIPS_FPU_TYPE == MIPS_FPU_SINGLE && len == 4)))
+ {
+ if (!FP_REGISTER_DOUBLE && len == 8)
+ {
+ /* We need to break a 64bit float in two 32 bit halves and
+ spread them across a floating-point register pair. */
+ lo->buf_offset = TARGET_BYTE_ORDER == BIG_ENDIAN ? 4 : 0;
+ hi->buf_offset = TARGET_BYTE_ORDER == BIG_ENDIAN ? 0 : 4;
+ lo->reg_offset = ((TARGET_BYTE_ORDER == BIG_ENDIAN
+ && REGISTER_RAW_SIZE (FP0_REGNUM) == 8)
+ ? 4 : 0);
+ hi->reg_offset = lo->reg_offset;
+ lo->reg = FP0_REGNUM + 0;
+ hi->reg = FP0_REGNUM + 1;
+ lo->len = 4;
+ hi->len = 4;
+ }
+ else
+ {
+ /* The floating point value fits in a single floating-point
+ register. */
+ lo->reg_offset = ((TARGET_BYTE_ORDER == BIG_ENDIAN
+ && REGISTER_RAW_SIZE (FP0_REGNUM) == 8
+ && len == 4)
+ ? 4 : 0);
+ lo->reg = FP0_REGNUM;
+ lo->len = len;
+ lo->buf_offset = 0;
+ hi->len = 0;
+ hi->reg_offset = 0;
+ hi->buf_offset = 0;
+ hi->reg = 0;
+ }
+ }
+ else
+ {
+ /* Locate a result possibly spread across two registers. */
+ int regnum = 2;
+ lo->reg = regnum + 0;
+ hi->reg = regnum + 1;
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN
+ && len < MIPS_SAVED_REGSIZE)
+ {
+ /* "un-left-justify" the value in the low register */
+ lo->reg_offset = MIPS_SAVED_REGSIZE - len;
+ lo->len = len;
+ hi->reg_offset = 0;
+ hi->len = 0;
+ }
+ else if (TARGET_BYTE_ORDER == BIG_ENDIAN
+ && len > MIPS_SAVED_REGSIZE /* odd-size structs */
+ && len < MIPS_SAVED_REGSIZE * 2
+ && (TYPE_CODE (valtype) == TYPE_CODE_STRUCT ||
+ TYPE_CODE (valtype) == TYPE_CODE_UNION))
+ {
+ /* "un-left-justify" the value spread across two registers. */
+ lo->reg_offset = 2 * MIPS_SAVED_REGSIZE - len;
+ lo->len = MIPS_SAVED_REGSIZE - lo->reg_offset;
+ hi->reg_offset = 0;
+ hi->len = len - lo->len;
+ }
+ else
+ {
+ /* Only perform a partial copy of the second register. */
+ lo->reg_offset = 0;
+ hi->reg_offset = 0;
+ if (len > MIPS_SAVED_REGSIZE)
+ {
+ lo->len = MIPS_SAVED_REGSIZE;
+ hi->len = len - MIPS_SAVED_REGSIZE;
+ }
+ else
+ {
+ lo->len = len;
+ hi->len = 0;
+ }
+ }
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN
+ && REGISTER_RAW_SIZE (regnum) == 8
+ && MIPS_SAVED_REGSIZE == 4)
+ {
+ /* Account for the fact that only the least-signficant part
+ of the register is being used */
+ lo->reg_offset += 4;
+ hi->reg_offset += 4;
+ }
+ lo->buf_offset = 0;
+ hi->buf_offset = lo->len;
+ }
+}
+
+/* Given a return value in `regbuf' with a type `valtype', extract and
+ copy its value into `valbuf'. */
+
void
mips_extract_return_value (valtype, regbuf, valbuf)
- struct type *valtype;
- char regbuf[REGISTER_BYTES];
- char *valbuf;
+ struct type *valtype;
+ char regbuf[REGISTER_BYTES];
+ char *valbuf;
{
+ struct return_value_word lo;
+ struct return_value_word hi;
+ return_value_location (valtype, &lo, &hi);
+
+ memcpy (valbuf + lo.buf_offset,
+ regbuf + REGISTER_BYTE (lo.reg) + lo.reg_offset,
+ lo.len);
+
+ if (hi.len > 0)
+ memcpy (valbuf + hi.buf_offset,
+ regbuf + REGISTER_BYTE (hi.reg) + hi.reg_offset,
+ hi.len);
+
+#if 0
int regnum;
int offset = 0;
int len = TYPE_LENGTH (valtype);
-
+
regnum = 2;
if (TYPE_CODE (valtype) == TYPE_CODE_FLT
- && (mips_fpu == MIPS_FPU_DOUBLE
- || (mips_fpu == MIPS_FPU_SINGLE && len <= MIPS_REGSIZE)))
+ && (MIPS_FPU_TYPE == MIPS_FPU_DOUBLE
+ || (MIPS_FPU_TYPE == MIPS_FPU_SINGLE
+ && len <= MIPS_FPU_SINGLE_REGSIZE)))
regnum = FP0_REGNUM;
if (TARGET_BYTE_ORDER == BIG_ENDIAN)
- { /* "un-left-justify" the value from the register */
+ { /* "un-left-justify" the value from the register */
if (len < REGISTER_RAW_SIZE (regnum))
offset = REGISTER_RAW_SIZE (regnum) - len;
- if (len > REGISTER_RAW_SIZE (regnum) && /* odd-size structs */
+ if (len > REGISTER_RAW_SIZE (regnum) && /* odd-size structs */
len < REGISTER_RAW_SIZE (regnum) * 2 &&
(TYPE_CODE (valtype) == TYPE_CODE_STRUCT ||
TYPE_CODE (valtype) == TYPE_CODE_UNION))
}
memcpy (valbuf, regbuf + REGISTER_BYTE (regnum) + offset, len);
REGISTER_CONVERT_TO_TYPE (regnum, valtype, valbuf);
+#endif
}
-/* Given a return value in `regbuf' with a type `valtype',
- write it's value into the appropriate register. */
+/* Given a return value in `valbuf' with a type `valtype', write it's
+ value into the appropriate register. */
+
void
mips_store_return_value (valtype, valbuf)
- struct type *valtype;
- char *valbuf;
+ struct type *valtype;
+ char *valbuf;
{
+ char raw_buffer[MAX_REGISTER_RAW_SIZE];
+ struct return_value_word lo;
+ struct return_value_word hi;
+ return_value_location (valtype, &lo, &hi);
+
+ memset (raw_buffer, 0, sizeof (raw_buffer));
+ memcpy (raw_buffer + lo.reg_offset, valbuf + lo.buf_offset, lo.len);
+ write_register_bytes (REGISTER_BYTE (lo.reg),
+ raw_buffer,
+ REGISTER_RAW_SIZE (lo.reg));
+
+ if (hi.len > 0)
+ {
+ memset (raw_buffer, 0, sizeof (raw_buffer));
+ memcpy (raw_buffer + hi.reg_offset, valbuf + hi.buf_offset, hi.len);
+ write_register_bytes (REGISTER_BYTE (hi.reg),
+ raw_buffer,
+ REGISTER_RAW_SIZE (hi.reg));
+ }
+
+#if 0
int regnum;
int offset = 0;
int len = TYPE_LENGTH (valtype);
char raw_buffer[MAX_REGISTER_RAW_SIZE];
-
+
regnum = 2;
if (TYPE_CODE (valtype) == TYPE_CODE_FLT
- && (mips_fpu == MIPS_FPU_DOUBLE
- || (mips_fpu == MIPS_FPU_SINGLE && len <= MIPS_REGSIZE)))
+ && (MIPS_FPU_TYPE == MIPS_FPU_DOUBLE
+ || (MIPS_FPU_TYPE == MIPS_FPU_SINGLE
+ && len <= MIPS_REGSIZE)))
regnum = FP0_REGNUM;
if (TARGET_BYTE_ORDER == BIG_ENDIAN)
- { /* "left-justify" the value in the register */
+ { /* "left-justify" the value in the register */
if (len < REGISTER_RAW_SIZE (regnum))
offset = REGISTER_RAW_SIZE (regnum) - len;
- if (len > REGISTER_RAW_SIZE (regnum) && /* odd-size structs */
+ if (len > REGISTER_RAW_SIZE (regnum) && /* odd-size structs */
len < REGISTER_RAW_SIZE (regnum) * 2 &&
(TYPE_CODE (valtype) == TYPE_CODE_STRUCT ||
TYPE_CODE (valtype) == TYPE_CODE_UNION))
offset = 2 * REGISTER_RAW_SIZE (regnum) - len;
}
- memcpy(raw_buffer + offset, valbuf, len);
- REGISTER_CONVERT_FROM_TYPE(regnum, valtype, raw_buffer);
- write_register_bytes(REGISTER_BYTE (regnum), raw_buffer,
- len > REGISTER_RAW_SIZE (regnum) ?
- len : REGISTER_RAW_SIZE (regnum));
+ memcpy (raw_buffer + offset, valbuf, len);
+ REGISTER_CONVERT_FROM_TYPE (regnum, valtype, raw_buffer);
+ write_register_bytes (REGISTER_BYTE (regnum), raw_buffer,
+ len > REGISTER_RAW_SIZE (regnum) ?
+ len : REGISTER_RAW_SIZE (regnum));
+#endif
}
/* Exported procedure: Is PC in the signal trampoline code */
return (pc >= sigtramp_address && pc < sigtramp_end);
}
-/* Command to set FPU type. mips_fpu_string will have been set to the
- user's argument. Set mips_fpu based on mips_fpu_string, and then
- canonicalize mips_fpu_string. */
+/* Root of all "set mips "/"show mips " commands. This will eventually be
+ used for all MIPS-specific commands. */
-/*ARGSUSED*/
+static void show_mips_command (char *, int);
static void
-mips_set_fpu_command (args, from_tty, c)
+show_mips_command (args, from_tty)
char *args;
int from_tty;
- struct cmd_list_element *c;
{
- char *err = NULL;
-
- if (mips_fpu_string == NULL || *mips_fpu_string == '\0')
- mips_fpu = MIPS_FPU_DOUBLE;
- else if (strcasecmp (mips_fpu_string, "double") == 0
- || strcasecmp (mips_fpu_string, "on") == 0
- || strcasecmp (mips_fpu_string, "1") == 0
- || strcasecmp (mips_fpu_string, "yes") == 0)
- mips_fpu = MIPS_FPU_DOUBLE;
- else if (strcasecmp (mips_fpu_string, "none") == 0
- || strcasecmp (mips_fpu_string, "off") == 0
- || strcasecmp (mips_fpu_string, "0") == 0
- || strcasecmp (mips_fpu_string, "no") == 0)
- mips_fpu = MIPS_FPU_NONE;
- else if (strcasecmp (mips_fpu_string, "single") == 0)
- mips_fpu = MIPS_FPU_SINGLE;
- else
- err = strsave (mips_fpu_string);
+ help_list (showmipscmdlist, "show mips ", all_commands, gdb_stdout);
+}
- if (mips_fpu_string != NULL)
- free (mips_fpu_string);
+static void set_mips_command (char *, int);
+static void
+set_mips_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ printf_unfiltered ("\"set mips\" must be followed by an appropriate subcommand.\n");
+ help_list (setmipscmdlist, "set mips ", all_commands, gdb_stdout);
+}
- switch (mips_fpu)
+/* Commands to show/set the MIPS FPU type. */
+
+static void show_mipsfpu_command (char *, int);
+static void
+show_mipsfpu_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ char *msg;
+ char *fpu;
+ switch (MIPS_FPU_TYPE)
{
- case MIPS_FPU_DOUBLE:
- mips_fpu_string = strsave ("double");
- break;
case MIPS_FPU_SINGLE:
- mips_fpu_string = strsave ("single");
+ fpu = "single-precision";
+ break;
+ case MIPS_FPU_DOUBLE:
+ fpu = "double-precision";
break;
case MIPS_FPU_NONE:
- mips_fpu_string = strsave ("none");
+ fpu = "absent (none)";
break;
}
+ if (mips_fpu_type_auto)
+ printf_unfiltered ("The MIPS floating-point coprocessor is set automatically (currently %s)\n",
+ fpu);
+ else
+ printf_unfiltered ("The MIPS floating-point coprocessor is assumed to be %s\n",
+ fpu);
+}
- if (err != NULL)
+
+static void set_mipsfpu_command (char *, int);
+static void
+set_mipsfpu_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ printf_unfiltered ("\"set mipsfpu\" must be followed by \"double\", \"single\",\"none\" or \"auto\".\n");
+ show_mipsfpu_command (args, from_tty);
+}
+
+static void set_mipsfpu_single_command (char *, int);
+static void
+set_mipsfpu_single_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ mips_fpu_type = MIPS_FPU_SINGLE;
+ mips_fpu_type_auto = 0;
+ if (GDB_MULTI_ARCH)
{
- struct cleanup *cleanups = make_cleanup (free, err);
- error ("Unknown FPU type `%s'. Use `double', `none', or `single'.",
- err);
- do_cleanups (cleanups);
+ gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_SINGLE;
}
}
+static void set_mipsfpu_double_command (char *, int);
static void
-mips_show_fpu_command (args, from_tty, c)
+set_mipsfpu_double_command (args, from_tty)
char *args;
int from_tty;
- struct cmd_list_element *c;
{
+ mips_fpu_type = MIPS_FPU_DOUBLE;
+ mips_fpu_type_auto = 0;
+ if (GDB_MULTI_ARCH)
+ {
+ gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_DOUBLE;
+ }
+}
+
+static void set_mipsfpu_none_command (char *, int);
+static void
+set_mipsfpu_none_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ mips_fpu_type = MIPS_FPU_NONE;
+ mips_fpu_type_auto = 0;
+ if (GDB_MULTI_ARCH)
+ {
+ gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_NONE;
+ }
+}
+
+static void set_mipsfpu_auto_command (char *, int);
+static void
+set_mipsfpu_auto_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ mips_fpu_type_auto = 1;
}
/* Command to set the processor type. */
return;
}
-
+
if (!mips_set_processor_type (tmp_mips_processor_type))
{
error ("Unknown processor type `%s'.", tmp_mips_processor_type);
if (strcasecmp (str, mips_processor_type_table[i].name) == 0)
{
mips_processor_type = str;
-
- for (j = 0; j < NUM_REGS; ++j)
- reg_names[j] = mips_processor_type_table[i].regnames[j];
-
+ mips_processor_reg_names = mips_processor_type_table[i].regnames;
return 1;
-
/* FIXME tweak fpu flag too */
}
}
prid = read_register (PRID_REGNUM);
if ((prid & ~0xf) == 0x700)
- return savestring ("r3041", strlen("r3041"));
+ return savestring ("r3041", strlen ("r3041"));
return NULL;
}
reinit_frame_cache ();
}
-static int
+int
gdb_print_insn_mips (memaddr, info)
bfd_vma memaddr;
disassemble_info *info;
it's definitely a 16-bit function. Otherwise, we have to just
guess that if the address passed in is odd, it's 16-bits. */
if (proc_desc)
- info->mach = pc_is_mips16 (PROC_LOW_ADDR (proc_desc)) ? 16 : 0;
+ info->mach = pc_is_mips16 (PROC_LOW_ADDR (proc_desc)) ? 16 : TM_PRINT_INSN_MACH;
else
- info->mach = pc_is_mips16 (memaddr) ? 16 : 0;
+ info->mach = pc_is_mips16 (memaddr) ? 16 : TM_PRINT_INSN_MACH;
/* Round down the instruction address to the appropriate boundary. */
memaddr &= (info->mach == 16 ? ~1 : ~3);
-
+
/* Call the appropriate disassembler based on the target endian-ness. */
if (TARGET_BYTE_ORDER == BIG_ENDIAN)
return print_insn_big_mips (memaddr, info);
return print_insn_little_mips (memaddr, info);
}
+/* Old-style breakpoint macros.
+ The IDT board uses an unusual breakpoint value, and sometimes gets
+ confused when it sees the usual MIPS breakpoint instruction. */
+
+#define BIG_BREAKPOINT {0, 0x5, 0, 0xd}
+#define LITTLE_BREAKPOINT {0xd, 0, 0x5, 0}
+#define PMON_BIG_BREAKPOINT {0, 0, 0, 0xd}
+#define PMON_LITTLE_BREAKPOINT {0xd, 0, 0, 0}
+#define IDT_BIG_BREAKPOINT {0, 0, 0x0a, 0xd}
+#define IDT_LITTLE_BREAKPOINT {0xd, 0x0a, 0, 0}
+#define MIPS16_BIG_BREAKPOINT {0xe8, 0xa5}
+#define MIPS16_LITTLE_BREAKPOINT {0xa5, 0xe8}
+
/* This function implements the BREAKPOINT_FROM_PC macro. It uses the program
counter value to determine whether a 16- or 32-bit breakpoint should be
used. It returns a pointer to a string of bytes that encode a breakpoint
(if necessary) to point to the actual memory location where the
breakpoint should be inserted. */
-unsigned char *mips_breakpoint_from_pc (pcptr, lenptr)
+unsigned char *
+mips_breakpoint_from_pc (pcptr, lenptr)
CORE_ADDR *pcptr;
int *lenptr;
{
{
static char mips16_big_breakpoint[] = MIPS16_BIG_BREAKPOINT;
*pcptr = UNMAKE_MIPS16_ADDR (*pcptr);
- *lenptr = sizeof(mips16_big_breakpoint);
+ *lenptr = sizeof (mips16_big_breakpoint);
return mips16_big_breakpoint;
}
else
static char pmon_big_breakpoint[] = PMON_BIG_BREAKPOINT;
static char idt_big_breakpoint[] = IDT_BIG_BREAKPOINT;
- *lenptr = sizeof(big_breakpoint);
+ *lenptr = sizeof (big_breakpoint);
if (strcmp (target_shortname, "mips") == 0)
return idt_big_breakpoint;
{
static char mips16_little_breakpoint[] = MIPS16_LITTLE_BREAKPOINT;
*pcptr = UNMAKE_MIPS16_ADDR (*pcptr);
- *lenptr = sizeof(mips16_little_breakpoint);
+ *lenptr = sizeof (mips16_little_breakpoint);
return mips16_little_breakpoint;
}
else
static char pmon_little_breakpoint[] = PMON_LITTLE_BREAKPOINT;
static char idt_little_breakpoint[] = IDT_LITTLE_BREAKPOINT;
- *lenptr = sizeof(little_breakpoint);
+ *lenptr = sizeof (little_breakpoint);
if (strcmp (target_shortname, "mips") == 0)
return idt_little_breakpoint;
}
}
-/* Test whether the PC points to the return instruction at the
- end of a function. This implements the ABOUT_TO_RETURN macro. */
-
-int
-mips_about_to_return (pc)
- CORE_ADDR pc;
-{
- if (pc_is_mips16 (pc))
- /* This mips16 case isn't necessarily reliable. Sometimes the compiler
- generates a "jr $ra"; other times it generates code to load
- the return address from the stack to an accessible register (such
- as $a3), then a "jr" using that register. This second case
- is almost impossible to distinguish from an indirect jump
- used for switch statements, so we don't even try. */
- return mips_fetch_instruction (pc) == 0xe820; /* jr $ra */
- else
- return mips_fetch_instruction (pc) == 0x3e00008; /* jr $ra */
-}
-
-
/* If PC is in a mips16 call or return stub, return the address of the target
PC, which is either the callee or the caller. There are several
cases which must be handled:
* If the PC is in __mips16_ret_{d,s}f, this is a return stub and the
- target PC is in $31 ($ra).
+ target PC is in $31 ($ra).
* If the PC is in __mips16_call_stub_{1..10}, this is a call stub
- and the target PC is in $2.
+ and the target PC is in $2.
* If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
- before the jal instruction, this is effectively a call stub
- and the the target PC is in $2. Otherwise this is effectively
- a return stub and the target PC is in $18.
+ before the jal instruction, this is effectively a call stub
+ and the the target PC is in $2. Otherwise this is effectively
+ a return stub and the target PC is in $18.
See the source code for the stubs in gcc/config/mips/mips16.S for
gory details.
This function implements the SKIP_TRAMPOLINE_CODE macro.
-*/
+ */
CORE_ADDR
mips_skip_stub (pc)
return read_register (2);
/* If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
- before the jal instruction, this is effectively a call stub
- and the the target PC is in $2. Otherwise this is effectively
- a return stub and the target PC is in $18. */
+ before the jal instruction, this is effectively a call stub
+ and the the target PC is in $2. Otherwise this is effectively
+ a return stub and the target PC is in $18. */
else if (name[19] == 's' || name[19] == 'd')
{
if (pc == start_addr)
{
/* Check if the target of the stub is a compiler-generated
- stub. Such a stub for a function bar might have a name
- like __fn_stub_bar, and might look like this:
- mfc1 $4,$f13
- mfc1 $5,$f12
- mfc1 $6,$f15
- mfc1 $7,$f14
- la $1,bar (becomes a lui/addiu pair)
- jr $1
- So scan down to the lui/addi and extract the target
- address from those two instructions. */
+ stub. Such a stub for a function bar might have a name
+ like __fn_stub_bar, and might look like this:
+ mfc1 $4,$f13
+ mfc1 $5,$f12
+ mfc1 $6,$f15
+ mfc1 $7,$f14
+ la $1,bar (becomes a lui/addiu pair)
+ jr $1
+ So scan down to the lui/addi and extract the target
+ address from those two instructions. */
CORE_ADDR target_pc = read_register (2);
t_inst inst;
return target_pc;
/* Scan through this _fn_stub_ code for the lui/addiu pair.
- The limit on the search is arbitrarily set to 20
- instructions. FIXME. */
+ The limit on the search is arbitrarily set to 20
+ instructions. FIXME. */
for (i = 0, pc = 0; i < 20; i++, target_pc += MIPS_INSTLEN)
{
- inst = mips_fetch_instruction (target_pc);
- if ((inst & 0xffff0000) == 0x3c010000) /* lui $at */
- pc = (inst << 16) & 0xffff0000; /* high word */
- else if ((inst & 0xffff0000) == 0x24210000) /* addiu $at */
- return pc | (inst & 0xffff); /* low word */
+ inst = mips_fetch_instruction (target_pc);
+ if ((inst & 0xffff0000) == 0x3c010000) /* lui $at */
+ pc = (inst << 16) & 0xffff0000; /* high word */
+ else if ((inst & 0xffff0000) == 0x24210000) /* addiu $at */
+ return pc | (inst & 0xffff); /* low word */
}
/* Couldn't find the lui/addui pair, so return stub address. */
return read_register (18);
}
}
- return 0; /* not a stub */
+ return 0; /* not a stub */
}
if (name[19] >= '0' && name[19] <= '9')
return 1;
/* If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
- before the jal instruction, this is effectively a call stub. */
+ before the jal instruction, this is effectively a call stub. */
else if (name[19] == 's' || name[19] == 'd')
return pc == start_addr;
}
- return 0; /* not a stub */
+ return 0; /* not a stub */
}
return 1;
/* If the PC is in __mips16_call_stub_{s,d}f_{0..10} but not at the start,
- i.e. after the jal instruction, this is effectively a return stub. */
+ i.e. after the jal instruction, this is effectively a return stub. */
if (strncmp (name, "__mips16_call_stub_", 19) == 0
&& (name[19] == 's' || name[19] == 'd')
&& pc != start_addr)
return 1;
- return 0; /* not a stub */
+ return 0; /* not a stub */
}
}
+/* Return a location where we can set a breakpoint that will be hit
+ when an inferior function call returns. This is normally the
+ program's entry point. Executables that don't have an entry
+ point (e.g. programs in ROM) should define a symbol __CALL_DUMMY_ADDRESS
+ whose address is the location where the breakpoint should be placed. */
+
+CORE_ADDR
+mips_call_dummy_address ()
+{
+ struct minimal_symbol *sym;
+
+ sym = lookup_minimal_symbol ("__CALL_DUMMY_ADDRESS", NULL, NULL);
+ if (sym)
+ return SYMBOL_VALUE_ADDRESS (sym);
+ else
+ return entry_point_address ();
+}
+
+
+/* If the current gcc for for this target does not produce correct debugging
+ information for float parameters, both prototyped and unprototyped, then
+ define this macro. This forces gdb to always assume that floats are
+ passed as doubles and then converted in the callee.
+
+ For the mips chip, it appears that the debug info marks the parameters as
+ floats regardless of whether the function is prototyped, but the actual
+ values are passed as doubles for the non-prototyped case and floats for
+ the prototyped case. Thus we choose to make the non-prototyped case work
+ for C and break the prototyped case, since the non-prototyped case is
+ probably much more common. (FIXME). */
+
+static int
+mips_coerce_float_to_double (struct type *formal, struct type *actual)
+{
+ return current_language->la_language == language_c;
+}
+
+/* When debugging a 64 MIPS target running a 32 bit ABI, the size of
+ the register stored on the stack (32) is different to its real raw
+ size (64). The below ensures that registers are fetched from the
+ stack using their ABI size and then stored into the RAW_BUFFER
+ using their raw size.
+
+ The alternative to adding this function would be to add an ABI
+ macro - REGISTER_STACK_SIZE(). */
+
+static void
+mips_get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
+ char *raw_buffer;
+ int *optimized;
+ CORE_ADDR *addrp;
+ struct frame_info *frame;
+ int regnum;
+ enum lval_type *lval;
+{
+ CORE_ADDR addr;
+
+ if (!target_has_registers)
+ error ("No registers.");
+
+ /* Normal systems don't optimize out things with register numbers. */
+ if (optimized != NULL)
+ *optimized = 0;
+ addr = find_saved_register (frame, regnum);
+ if (addr != 0)
+ {
+ if (lval != NULL)
+ *lval = lval_memory;
+ if (regnum == SP_REGNUM)
+ {
+ if (raw_buffer != NULL)
+ {
+ /* Put it back in target format. */
+ store_address (raw_buffer, REGISTER_RAW_SIZE (regnum),
+ (LONGEST) addr);
+ }
+ if (addrp != NULL)
+ *addrp = 0;
+ return;
+ }
+ if (raw_buffer != NULL)
+ {
+ LONGEST val;
+ if (regnum < 32)
+ /* Only MIPS_SAVED_REGSIZE bytes of GP registers are
+ saved. */
+ val = read_memory_integer (addr, MIPS_SAVED_REGSIZE);
+ else
+ val = read_memory_integer (addr, REGISTER_RAW_SIZE (regnum));
+ store_address (raw_buffer, REGISTER_RAW_SIZE (regnum), val);
+ }
+ }
+ else
+ {
+ if (lval != NULL)
+ *lval = lval_register;
+ addr = REGISTER_BYTE (regnum);
+ if (raw_buffer != NULL)
+ read_register_gen (regnum, raw_buffer);
+ }
+ if (addrp != NULL)
+ *addrp = addr;
+}
+
+static gdbarch_init_ftype mips_gdbarch_init;
+static struct gdbarch *
+mips_gdbarch_init (info, arches)
+ struct gdbarch_info info;
+ struct gdbarch_list *arches;
+{
+ static LONGEST mips_call_dummy_words[] =
+ {0};
+ struct gdbarch *gdbarch;
+ struct gdbarch_tdep *tdep;
+ int elf_flags;
+#if 0
+ int ef_mips_bitptrs;
+#endif
+#if 0
+ int ef_mips_arch;
+#endif
+ enum mips_abi mips_abi;
+
+ /* Extract the elf_flags if available */
+ if (info.abfd != NULL
+ && bfd_get_flavour (info.abfd) == bfd_target_elf_flavour)
+ elf_flags = elf_elfheader (info.abfd)->e_flags;
+ else
+ elf_flags = 0;
+
+ /* Check ELF_FLAGS to see if it specifies the ABI being used. */
+ switch ((elf_flags & EF_MIPS_ABI))
+ {
+ case E_MIPS_ABI_O32:
+ mips_abi = MIPS_ABI_O32;
+ break;
+ case E_MIPS_ABI_O64:
+ mips_abi = MIPS_ABI_O64;
+ break;
+ case E_MIPS_ABI_EABI32:
+ mips_abi = MIPS_ABI_EABI32;
+ break;
+ case E_MIPS_ABI_EABI64:
+ mips_abi = MIPS_ABI_EABI64;
+ break;
+ default:
+ mips_abi = MIPS_ABI_UNKNOWN;
+ break;
+ }
+ /* Try the architecture for any hint of the corect ABI */
+ if (mips_abi == MIPS_ABI_UNKNOWN
+ && info.bfd_arch_info != NULL
+ && info.bfd_arch_info->arch == bfd_arch_mips)
+ {
+ switch (info.bfd_arch_info->mach)
+ {
+ case bfd_mach_mips3900:
+ mips_abi = MIPS_ABI_EABI32;
+ break;
+ case bfd_mach_mips4100:
+ case bfd_mach_mips5000:
+ mips_abi = MIPS_ABI_EABI64;
+ break;
+ }
+ }
+#ifdef MIPS_DEFAULT_ABI
+ if (mips_abi == MIPS_ABI_UNKNOWN)
+ mips_abi = MIPS_DEFAULT_ABI;
+#endif
+
+ if (gdbarch_debug)
+ {
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_gdbarch_init: elf_flags = 0x%08x\n",
+ elf_flags);
+#if 0
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_gdbarch_init: ef_mips_arch = %d\n",
+ ef_mips_arch);
+#endif
+#if 0
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_gdbarch_init: ef_mips_bitptrs = %d\n",
+ ef_mips_bitptrs);
+#endif
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_gdbarch_init: mips_abi = %d\n",
+ mips_abi);
+ }
+
+ /* try to find a pre-existing architecture */
+ for (arches = gdbarch_list_lookup_by_info (arches, &info);
+ arches != NULL;
+ arches = gdbarch_list_lookup_by_info (arches->next, &info))
+ {
+ /* MIPS needs to be pedantic about which ABI the object is
+ using. */
+ if (gdbarch_tdep (current_gdbarch)->elf_flags != elf_flags)
+ continue;
+ if (gdbarch_tdep (current_gdbarch)->mips_abi != mips_abi)
+ continue;
+ return arches->gdbarch;
+ }
+
+ /* Need a new architecture. Fill in a target specific vector. */
+ tdep = (struct gdbarch_tdep *) xmalloc (sizeof (struct gdbarch_tdep));
+ gdbarch = gdbarch_alloc (&info, tdep);
+ tdep->elf_flags = elf_flags;
+
+ /* Initially set everything according to the ABI. */
+ set_gdbarch_short_bit (gdbarch, 16);
+ set_gdbarch_int_bit (gdbarch, 32);
+ set_gdbarch_float_bit (gdbarch, 32);
+ set_gdbarch_double_bit (gdbarch, 64);
+ set_gdbarch_long_double_bit (gdbarch, 64);
+ tdep->mips_abi = mips_abi;
+ switch (mips_abi)
+ {
+ case MIPS_ABI_O32:
+ tdep->mips_default_saved_regsize = 4;
+ tdep->mips_default_stack_argsize = 4;
+ tdep->mips_fp_register_double = 0;
+ tdep->mips_last_arg_regnum = ZERO_REGNUM + 7;
+ tdep->mips_last_fp_arg_regnum = FP0_REGNUM + 15;
+ tdep->mips_regs_have_home_p = 1;
+ tdep->gdb_target_is_mips64 = 0;
+ set_gdbarch_long_bit (gdbarch, 32);
+ set_gdbarch_ptr_bit (gdbarch, 32);
+ set_gdbarch_long_long_bit (gdbarch, 64);
+ break;
+ case MIPS_ABI_O64:
+ tdep->mips_default_saved_regsize = 8;
+ tdep->mips_default_stack_argsize = 8;
+ tdep->mips_fp_register_double = 1;
+ tdep->mips_last_arg_regnum = ZERO_REGNUM + 7;
+ tdep->mips_last_fp_arg_regnum = FP0_REGNUM + 15;
+ tdep->mips_regs_have_home_p = 1;
+ tdep->gdb_target_is_mips64 = 1;
+ set_gdbarch_long_bit (gdbarch, 32);
+ set_gdbarch_ptr_bit (gdbarch, 32);
+ set_gdbarch_long_long_bit (gdbarch, 64);
+ break;
+ case MIPS_ABI_EABI32:
+ tdep->mips_default_saved_regsize = 4;
+ tdep->mips_default_stack_argsize = 4;
+ tdep->mips_fp_register_double = 0;
+ tdep->mips_last_arg_regnum = ZERO_REGNUM + 11;
+ tdep->mips_last_fp_arg_regnum = FP0_REGNUM + 19;
+ tdep->mips_regs_have_home_p = 0;
+ tdep->gdb_target_is_mips64 = 0;
+ set_gdbarch_long_bit (gdbarch, 32);
+ set_gdbarch_ptr_bit (gdbarch, 32);
+ set_gdbarch_long_long_bit (gdbarch, 64);
+ break;
+ case MIPS_ABI_EABI64:
+ tdep->mips_default_saved_regsize = 8;
+ tdep->mips_default_stack_argsize = 8;
+ tdep->mips_fp_register_double = 1;
+ tdep->mips_last_arg_regnum = ZERO_REGNUM + 11;
+ tdep->mips_last_fp_arg_regnum = FP0_REGNUM + 19;
+ tdep->mips_regs_have_home_p = 0;
+ tdep->gdb_target_is_mips64 = 1;
+ set_gdbarch_long_bit (gdbarch, 64);
+ set_gdbarch_ptr_bit (gdbarch, 64);
+ set_gdbarch_long_long_bit (gdbarch, 64);
+ break;
+ case MIPS_ABI_N32:
+ tdep->mips_default_saved_regsize = 4;
+ tdep->mips_default_stack_argsize = 8;
+ tdep->mips_fp_register_double = 1;
+ tdep->mips_last_arg_regnum = ZERO_REGNUM + 11;
+ tdep->mips_last_fp_arg_regnum = FP0_REGNUM + 19;
+ tdep->mips_regs_have_home_p = 0;
+ tdep->gdb_target_is_mips64 = 0;
+ set_gdbarch_long_bit (gdbarch, 32);
+ set_gdbarch_ptr_bit (gdbarch, 32);
+ set_gdbarch_long_long_bit (gdbarch, 64);
+ break;
+ default:
+ tdep->mips_default_saved_regsize = MIPS_REGSIZE;
+ tdep->mips_default_stack_argsize = MIPS_REGSIZE;
+ tdep->mips_fp_register_double = (REGISTER_VIRTUAL_SIZE (FP0_REGNUM) == 8);
+ tdep->mips_last_arg_regnum = ZERO_REGNUM + 11;
+ tdep->mips_last_fp_arg_regnum = FP0_REGNUM + 19;
+ tdep->mips_regs_have_home_p = 1;
+ tdep->gdb_target_is_mips64 = 0;
+ set_gdbarch_long_bit (gdbarch, 32);
+ set_gdbarch_ptr_bit (gdbarch, 32);
+ set_gdbarch_long_long_bit (gdbarch, 64);
+ break;
+ }
+
+ /* FIXME: jlarmour/2000-04-07: There *is* a flag EF_MIPS_32BIT_MODE
+ that could indicate -gp32 BUT gas/config/tc-mips.c contains the
+ comment:
+
+ ``We deliberately don't allow "-gp32" to set the MIPS_32BITMODE
+ flag in object files because to do so would make it impossible to
+ link with libraries compiled without "-gp32". This is
+ unnecessarily restrictive.
+
+ We could solve this problem by adding "-gp32" multilibs to gcc,
+ but to set this flag before gcc is built with such multilibs will
+ break too many systems.''
+
+ But even more unhelpfully, the default linker output target for
+ mips64-elf is elf32-bigmips, and has EF_MIPS_32BIT_MODE set, even
+ for 64-bit programs - you need to change the ABI to change this,
+ and not all gcc targets support that currently. Therefore using
+ this flag to detect 32-bit mode would do the wrong thing given
+ the current gcc - it would make GDB treat these 64-bit programs
+ as 32-bit programs by default. */
+
+#if 0
+ /* determine the ISA */
+ switch (elf_flags & EF_MIPS_ARCH)
+ {
+ case E_MIPS_ARCH_1:
+ ef_mips_arch = 1;
+ break;
+ case E_MIPS_ARCH_2:
+ ef_mips_arch = 2;
+ break;
+ case E_MIPS_ARCH_3:
+ ef_mips_arch = 3;
+ break;
+ case E_MIPS_ARCH_4:
+ ef_mips_arch = 0;
+ break;
+ default:
+ break;
+ }
+#endif
+
+#if 0
+ /* determine the size of a pointer */
+ if ((elf_flags & EF_MIPS_32BITPTRS))
+ {
+ ef_mips_bitptrs = 32;
+ }
+ else if ((elf_flags & EF_MIPS_64BITPTRS))
+ {
+ ef_mips_bitptrs = 64;
+ }
+ else
+ {
+ ef_mips_bitptrs = 0;
+ }
+#endif
+
+ /* enable/disable the MIPS FPU */
+ if (!mips_fpu_type_auto)
+ tdep->mips_fpu_type = mips_fpu_type;
+ else if (info.bfd_arch_info != NULL
+ && info.bfd_arch_info->arch == bfd_arch_mips)
+ switch (info.bfd_arch_info->mach)
+ {
+ case bfd_mach_mips3900:
+ case bfd_mach_mips4100:
+ case bfd_mach_mips4111:
+ tdep->mips_fpu_type = MIPS_FPU_NONE;
+ break;
+ case bfd_mach_mips4650:
+ tdep->mips_fpu_type = MIPS_FPU_SINGLE;
+ break;
+ default:
+ tdep->mips_fpu_type = MIPS_FPU_DOUBLE;
+ break;
+ }
+ else
+ tdep->mips_fpu_type = MIPS_FPU_DOUBLE;
+
+ /* MIPS version of register names. NOTE: At present the MIPS
+ register name management is part way between the old -
+ #undef/#define REGISTER_NAMES and the new REGISTER_NAME(nr).
+ Further work on it is required. */
+ set_gdbarch_register_name (gdbarch, mips_register_name);
+ set_gdbarch_read_pc (gdbarch, generic_target_read_pc);
+ set_gdbarch_write_pc (gdbarch, generic_target_write_pc);
+ set_gdbarch_read_fp (gdbarch, generic_target_read_fp);
+ set_gdbarch_write_fp (gdbarch, generic_target_write_fp);
+ set_gdbarch_read_sp (gdbarch, generic_target_read_sp);
+ set_gdbarch_write_sp (gdbarch, generic_target_write_sp);
+
+ /* Initialize a frame */
+ set_gdbarch_init_extra_frame_info (gdbarch, mips_init_extra_frame_info);
+
+ /* MIPS version of CALL_DUMMY */
+
+ set_gdbarch_call_dummy_p (gdbarch, 1);
+ set_gdbarch_call_dummy_stack_adjust_p (gdbarch, 0);
+ set_gdbarch_use_generic_dummy_frames (gdbarch, 0);
+ set_gdbarch_call_dummy_location (gdbarch, AT_ENTRY_POINT);
+ set_gdbarch_call_dummy_address (gdbarch, mips_call_dummy_address);
+ set_gdbarch_call_dummy_start_offset (gdbarch, 0);
+ set_gdbarch_call_dummy_breakpoint_offset_p (gdbarch, 1);
+ set_gdbarch_call_dummy_breakpoint_offset (gdbarch, 0);
+ set_gdbarch_call_dummy_length (gdbarch, 0);
+ set_gdbarch_pc_in_call_dummy (gdbarch, pc_in_call_dummy_at_entry_point);
+ set_gdbarch_call_dummy_words (gdbarch, mips_call_dummy_words);
+ set_gdbarch_sizeof_call_dummy_words (gdbarch, sizeof (mips_call_dummy_words));
+ set_gdbarch_push_return_address (gdbarch, mips_push_return_address);
+ set_gdbarch_push_arguments (gdbarch, mips_push_arguments);
+ set_gdbarch_register_convertible (gdbarch, generic_register_convertible_not);
+ set_gdbarch_coerce_float_to_double (gdbarch, mips_coerce_float_to_double);
+
+ set_gdbarch_frame_chain_valid (gdbarch, func_frame_chain_valid);
+ set_gdbarch_get_saved_register (gdbarch, mips_get_saved_register);
+
+ return gdbarch;
+}
+
+static void
+mips_dump_tdep (struct gdbarch *current_gdbarch, struct ui_file *file)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ if (tdep != NULL)
+ {
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: tdep->elf_flags = 0x%x\n",
+ tdep->elf_flags);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: tdep->mips_abi = %d\n",
+ tdep->mips_abi);
+ }
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: FP_REGISTER_DOUBLE = %d\n",
+ FP_REGISTER_DOUBLE);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_DEFAULT_FPU_TYPE = %d (%s)\n",
+ MIPS_DEFAULT_FPU_TYPE,
+ (MIPS_DEFAULT_FPU_TYPE == MIPS_FPU_NONE ? "none"
+ : MIPS_DEFAULT_FPU_TYPE == MIPS_FPU_SINGLE ? "single"
+ : MIPS_DEFAULT_FPU_TYPE == MIPS_FPU_DOUBLE ? "double"
+ : "???"));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_EABI = %d\n",
+ MIPS_EABI);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_LAST_FP_ARG_REGNUM = %d\n",
+ MIPS_LAST_FP_ARG_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_FPU_TYPE = %d (%s)\n",
+ MIPS_FPU_TYPE,
+ (MIPS_FPU_TYPE == MIPS_FPU_NONE ? "none"
+ : MIPS_FPU_TYPE == MIPS_FPU_SINGLE ? "single"
+ : MIPS_FPU_TYPE == MIPS_FPU_DOUBLE ? "double"
+ : "???"));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_DEFAULT_SAVED_REGSIZE = %d\n",
+ MIPS_DEFAULT_SAVED_REGSIZE);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: FP_REGISTER_DOUBLE = %d\n",
+ FP_REGISTER_DOUBLE);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_REGS_HAVE_HOME_P = %d\n",
+ MIPS_REGS_HAVE_HOME_P);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_DEFAULT_STACK_ARGSIZE = %d\n",
+ MIPS_DEFAULT_STACK_ARGSIZE);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_STACK_ARGSIZE = %d\n",
+ MIPS_STACK_ARGSIZE);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_REGSIZE = %d\n",
+ MIPS_REGSIZE);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: A0_REGNUM = %d\n",
+ A0_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: ADDR_BITS_REMOVE # %s\n",
+ XSTRING (ADDR_BITS_REMOVE(ADDR)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: ATTACH_DETACH # %s\n",
+ XSTRING (ATTACH_DETACH));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: BADVADDR_REGNUM = %d\n",
+ BADVADDR_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: BIG_BREAKPOINT = delete?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: CAUSE_REGNUM = %d\n",
+ CAUSE_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: CPLUS_MARKER = %c\n",
+ CPLUS_MARKER);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: DEFAULT_MIPS_TYPE = %s\n",
+ DEFAULT_MIPS_TYPE);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: DO_REGISTERS_INFO # %s\n",
+ XSTRING (DO_REGISTERS_INFO));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: DWARF_REG_TO_REGNUM # %s\n",
+ XSTRING (DWARF_REG_TO_REGNUM (REGNUM)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: ECOFF_REG_TO_REGNUM # %s\n",
+ XSTRING (ECOFF_REG_TO_REGNUM (REGNUM)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: ELF_MAKE_MSYMBOL_SPECIAL # %s\n",
+ XSTRING (ELF_MAKE_MSYMBOL_SPECIAL (SYM, MSYM)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: FCRCS_REGNUM = %d\n",
+ FCRCS_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: FCRIR_REGNUM = %d\n",
+ FCRIR_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: FIRST_EMBED_REGNUM = %d\n",
+ FIRST_EMBED_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: FPA0_REGNUM = %d\n",
+ FPA0_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: GDB_TARGET_IS_MIPS64 = %d\n",
+ GDB_TARGET_IS_MIPS64);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: GDB_TARGET_MASK_DISAS_PC # %s\n",
+ XSTRING (GDB_TARGET_MASK_DISAS_PC (PC)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: GDB_TARGET_UNMASK_DISAS_PC # %s\n",
+ XSTRING (GDB_TARGET_UNMASK_DISAS_PC (PC)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: GEN_REG_SAVE_MASK = %d\n",
+ GEN_REG_SAVE_MASK);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: HAVE_NONSTEPPABLE_WATCHPOINT # %s\n",
+ XSTRING (HAVE_NONSTEPPABLE_WATCHPOINT));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: HI_REGNUM = %d\n",
+ HI_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: IDT_BIG_BREAKPOINT = delete?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: IDT_LITTLE_BREAKPOINT = delete?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: IGNORE_HELPER_CALL # %s\n",
+ XSTRING (IGNORE_HELPER_CALL (PC)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: INIT_FRAME_PC # %s\n",
+ XSTRING (INIT_FRAME_PC (FROMLEAF, PREV)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: INIT_FRAME_PC_FIRST # %s\n",
+ XSTRING (INIT_FRAME_PC_FIRST (FROMLEAF, PREV)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: IN_SIGTRAMP # %s\n",
+ XSTRING (IN_SIGTRAMP (PC, NAME)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: IN_SOLIB_CALL_TRAMPOLINE # %s\n",
+ XSTRING (IN_SOLIB_CALL_TRAMPOLINE (PC, NAME)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: IN_SOLIB_RETURN_TRAMPOLINE # %s\n",
+ XSTRING (IN_SOLIB_RETURN_TRAMPOLINE (PC, NAME)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: IS_MIPS16_ADDR = FIXME!\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: LAST_EMBED_REGNUM = %d\n",
+ LAST_EMBED_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: LITTLE_BREAKPOINT = delete?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: LO_REGNUM = %d\n",
+ LO_REGNUM);
+#ifdef MACHINE_CPROC_FP_OFFSET
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MACHINE_CPROC_FP_OFFSET = %d\n",
+ MACHINE_CPROC_FP_OFFSET);
+#endif
+#ifdef MACHINE_CPROC_PC_OFFSET
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MACHINE_CPROC_PC_OFFSET = %d\n",
+ MACHINE_CPROC_PC_OFFSET);
+#endif
+#ifdef MACHINE_CPROC_SP_OFFSET
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MACHINE_CPROC_SP_OFFSET = %d\n",
+ MACHINE_CPROC_SP_OFFSET);
+#endif
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MAKE_MIPS16_ADDR = FIXME!\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS16_BIG_BREAKPOINT = delete?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS16_INSTLEN = %d\n",
+ MIPS16_INSTLEN);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS16_LITTLE_BREAKPOINT = delete?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_DEFAULT_ABI = FIXME!\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_EFI_SYMBOL_NAME = multi-arch!!\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_INSTLEN = %d\n",
+ MIPS_INSTLEN);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_LAST_ARG_REGNUM = %d\n",
+ MIPS_LAST_ARG_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_NUMREGS = %d\n",
+ MIPS_NUMREGS);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_REGISTER_NAMES = delete?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_SAVED_REGSIZE = %d\n",
+ MIPS_SAVED_REGSIZE);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MSYMBOL_IS_SPECIAL = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MSYMBOL_SIZE # %s\n",
+ XSTRING (MSYMBOL_SIZE (MSYM)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: OP_LDFPR = used?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: OP_LDGPR = used?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PMON_BIG_BREAKPOINT = delete?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PMON_LITTLE_BREAKPOINT = delete?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PRID_REGNUM = %d\n",
+ PRID_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PRINT_EXTRA_FRAME_INFO # %s\n",
+ XSTRING (PRINT_EXTRA_FRAME_INFO (FRAME)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PROC_DESC_IS_DUMMY = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PROC_FRAME_ADJUST = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PROC_FRAME_OFFSET = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PROC_FRAME_REG = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PROC_FREG_MASK = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PROC_FREG_OFFSET = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PROC_HIGH_ADDR = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PROC_LOW_ADDR = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PROC_PC_REG = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PROC_REG_MASK = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PROC_REG_OFFSET = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PROC_SYMBOL = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PS_REGNUM = %d\n",
+ PS_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PUSH_FP_REGNUM = %d\n",
+ PUSH_FP_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: RA_REGNUM = %d\n",
+ RA_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: REGISTER_CONVERT_FROM_TYPE # %s\n",
+ XSTRING (REGISTER_CONVERT_FROM_TYPE (REGNUM, VALTYPE, RAW_BUFFER)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: REGISTER_CONVERT_TO_TYPE # %s\n",
+ XSTRING (REGISTER_CONVERT_TO_TYPE (REGNUM, VALTYPE, RAW_BUFFER)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: REGISTER_NAMES = delete?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: ROUND_DOWN = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: ROUND_UP = function?\n");
+#ifdef SAVED_BYTES
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SAVED_BYTES = %d\n",
+ SAVED_BYTES);
+#endif
+#ifdef SAVED_FP
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SAVED_FP = %d\n",
+ SAVED_FP);
+#endif
+#ifdef SAVED_PC
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SAVED_PC = %d\n",
+ SAVED_PC);
+#endif
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SETUP_ARBITRARY_FRAME # %s\n",
+ XSTRING (SETUP_ARBITRARY_FRAME (NUMARGS, ARGS)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SET_PROC_DESC_IS_DUMMY = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SIGFRAME_BASE = %d\n",
+ SIGFRAME_BASE);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SIGFRAME_FPREGSAVE_OFF = %d\n",
+ SIGFRAME_FPREGSAVE_OFF);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SIGFRAME_PC_OFF = %d\n",
+ SIGFRAME_PC_OFF);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SIGFRAME_REGSAVE_OFF = %d\n",
+ SIGFRAME_REGSAVE_OFF);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SIGFRAME_REG_SIZE = %d\n",
+ SIGFRAME_REG_SIZE);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SKIP_TRAMPOLINE_CODE # %s\n",
+ XSTRING (SKIP_TRAMPOLINE_CODE (PC)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SOFTWARE_SINGLE_STEP # %s\n",
+ XSTRING (SOFTWARE_SINGLE_STEP (SIG, BP_P)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SOFTWARE_SINGLE_STEP_P = %d\n",
+ SOFTWARE_SINGLE_STEP_P);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SOFTWARE_SINGLE_STEP_P = %d\n",
+ SOFTWARE_SINGLE_STEP_P);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: STAB_REG_TO_REGNUM # %s\n",
+ XSTRING (STAB_REG_TO_REGNUM (REGNUM)));
+#ifdef STACK_END_ADDR
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: STACK_END_ADDR = %d\n",
+ STACK_END_ADDR);
+#endif
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: STEP_SKIPS_DELAY # %s\n",
+ XSTRING (STEP_SKIPS_DELAY (PC)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: STEP_SKIPS_DELAY_P = %d\n",
+ STEP_SKIPS_DELAY_P);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: STOPPED_BY_WATCHPOINT # %s\n",
+ XSTRING (STOPPED_BY_WATCHPOINT (WS)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: T9_REGNUM = %d\n",
+ T9_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: TABULAR_REGISTER_OUTPUT = used?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: TARGET_CAN_USE_HARDWARE_WATCHPOINT # %s\n",
+ XSTRING (TARGET_CAN_USE_HARDWARE_WATCHPOINT (TYPE,CNT,OTHERTYPE)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: TARGET_HAS_HARDWARE_WATCHPOINTS # %s\n",
+ XSTRING (TARGET_HAS_HARDWARE_WATCHPOINTS));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: TARGET_MIPS = used?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: TM_PRINT_INSN_MACH # %s\n",
+ XSTRING (TM_PRINT_INSN_MACH));
+#ifdef TRACE_CLEAR
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: TRACE_CLEAR # %s\n",
+ XSTRING (TRACE_CLEAR (THREAD, STATE)));
+#endif
+#ifdef TRACE_FLAVOR
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: TRACE_FLAVOR = %d\n",
+ TRACE_FLAVOR);
+#endif
+#ifdef TRACE_FLAVOR_SIZE
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: TRACE_FLAVOR_SIZE = %d\n",
+ TRACE_FLAVOR_SIZE);
+#endif
+#ifdef TRACE_SET
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: TRACE_SET # %s\n",
+ XSTRING (TRACE_SET (X,STATE)));
+#endif
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: UNMAKE_MIPS16_ADDR = function?\n");
+#ifdef UNUSED_REGNUM
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: UNUSED_REGNUM = %d\n",
+ UNUSED_REGNUM);
+#endif
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: V0_REGNUM = %d\n",
+ V0_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: VM_MIN_ADDRESS = %ld\n",
+ (long) VM_MIN_ADDRESS);
+#ifdef VX_NUM_REGS
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: VX_NUM_REGS = %d (used?)\n",
+ VX_NUM_REGS);
+#endif
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: ZERO_REGNUM = %d\n",
+ ZERO_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: _PROC_MAGIC_ = %d\n",
+ _PROC_MAGIC_);
+}
+
void
_initialize_mips_tdep ()
{
+ static struct cmd_list_element *mipsfpulist = NULL;
struct cmd_list_element *c;
- tm_print_insn = gdb_print_insn_mips;
+ gdbarch_register (bfd_arch_mips, mips_gdbarch_init, mips_dump_tdep);
+ if (!tm_print_insn) /* Someone may have already set it */
+ tm_print_insn = gdb_print_insn_mips;
+
+ /* Add root prefix command for all "set mips"/"show mips" commands */
+ add_prefix_cmd ("mips", no_class, set_mips_command,
+ "Various MIPS specific commands.",
+ &setmipscmdlist, "set mips ", 0, &setlist);
+
+ add_prefix_cmd ("mips", no_class, show_mips_command,
+ "Various MIPS specific commands.",
+ &showmipscmdlist, "show mips ", 0, &showlist);
+
+ /* Allow the user to override the saved register size. */
+ add_show_from_set (add_set_enum_cmd ("saved-gpreg-size",
+ class_obscure,
+ size_enums,
+ &mips_saved_regsize_string, "\
+Set size of general purpose registers saved on the stack.\n\
+This option can be set to one of:\n\
+ 32 - Force GDB to treat saved GP registers as 32-bit\n\
+ 64 - Force GDB to treat saved GP registers as 64-bit\n\
+ auto - Allow GDB to use the target's default setting or autodetect the\n\
+ saved GP register size from information contained in the executable.\n\
+ (default: auto)",
+ &setmipscmdlist),
+ &showmipscmdlist);
+
+ /* Allow the user to override the argument stack size. */
+ add_show_from_set (add_set_enum_cmd ("stack-arg-size",
+ class_obscure,
+ size_enums,
+ &mips_stack_argsize_string, "\
+Set the amount of stack space reserved for each argument.\n\
+This option can be set to one of:\n\
+ 32 - Force GDB to allocate 32-bit chunks per argument\n\
+ 64 - Force GDB to allocate 64-bit chunks per argument\n\
+ auto - Allow GDB to determine the correct setting from the current\n\
+ target and executable (default)",
+ &setmipscmdlist),
+ &showmipscmdlist);
/* Let the user turn off floating point and set the fence post for
heuristic_proc_start. */
- c = add_set_cmd ("mipsfpu", class_support, var_string_noescape,
- (char *) &mips_fpu_string,
- "Set use of floating point coprocessor.\n\
-Set to `none' to avoid using floating point instructions when calling\n\
-functions or dealing with return values. Set to `single' to use only\n\
-single precision floating point as on the R4650. Set to `double' for\n\
-normal floating point support.",
- &setlist);
- c->function.sfunc = mips_set_fpu_command;
- c = add_show_from_set (c, &showlist);
- c->function.sfunc = mips_show_fpu_command;
-
- mips_fpu = MIPS_FPU_DOUBLE;
- mips_fpu_string = strsave ("double");
-
+ add_prefix_cmd ("mipsfpu", class_support, set_mipsfpu_command,
+ "Set use of MIPS floating-point coprocessor.",
+ &mipsfpulist, "set mipsfpu ", 0, &setlist);
+ add_cmd ("single", class_support, set_mipsfpu_single_command,
+ "Select single-precision MIPS floating-point coprocessor.",
+ &mipsfpulist);
+ add_cmd ("double", class_support, set_mipsfpu_double_command,
+ "Select double-precision MIPS floating-point coprocessor .",
+ &mipsfpulist);
+ add_alias_cmd ("on", "double", class_support, 1, &mipsfpulist);
+ add_alias_cmd ("yes", "double", class_support, 1, &mipsfpulist);
+ add_alias_cmd ("1", "double", class_support, 1, &mipsfpulist);
+ add_cmd ("none", class_support, set_mipsfpu_none_command,
+ "Select no MIPS floating-point coprocessor.",
+ &mipsfpulist);
+ add_alias_cmd ("off", "none", class_support, 1, &mipsfpulist);
+ add_alias_cmd ("no", "none", class_support, 1, &mipsfpulist);
+ add_alias_cmd ("0", "none", class_support, 1, &mipsfpulist);
+ add_cmd ("auto", class_support, set_mipsfpu_auto_command,
+ "Select MIPS floating-point coprocessor automatically.",
+ &mipsfpulist);
+ add_cmd ("mipsfpu", class_support, show_mipsfpu_command,
+ "Show current use of MIPS floating-point coprocessor target.",
+ &showlist);
+
+#if !GDB_MULTI_ARCH
c = add_set_cmd ("processor", class_support, var_string_noescape,
(char *) &tmp_mips_processor_type,
"Set the type of MIPS processor in use.\n\
tmp_mips_processor_type = strsave (DEFAULT_MIPS_TYPE);
mips_set_processor_type_command (strsave (DEFAULT_MIPS_TYPE), 0);
+#endif
/* We really would like to have both "0" and "unlimited" work, but
command.c doesn't deal with that. So make it a var_zinteger
might change our ability to get backtraces. */
c->function.sfunc = reinit_frame_cache_sfunc;
add_show_from_set (c, &showlist);
+
+ /* Allow the user to control whether the upper bits of 64-bit
+ addresses should be zeroed. */
+ add_show_from_set
+ (add_set_cmd ("mask-address", no_class, var_boolean, (char *) &mask_address_p,
+ "Set zeroing of upper 32 bits of 64-bit addresses.\n\
+Use \"on\" to enable the masking, and \"off\" to disable it.\n\
+Without an argument, zeroing of upper address bits is enabled.", &setlist),
+ &showlist);
+
+ /* Allow the user to control the size of 32 bit registers within the
+ raw remote packet. */
+ add_show_from_set (add_set_cmd ("remote-mips64-transfers-32bit-regs",
+ class_obscure,
+ var_boolean,
+ (char *)&mips64_transfers_32bit_regs_p, "\
+Set compatibility with MIPS targets that transfers 32 and 64 bit quantities.\n\
+Use \"on\" to enable backward compatibility with older MIPS 64 GDB+target\n\
+that would transfer 32 bits for some registers (e.g. SR, FSR) and\n\
+64 bits for others. Use \"off\" to disable compatibility mode",
+ &setlist),
+ &showlist);
+
+ /* Debug this files internals. */
+ add_show_from_set (add_set_cmd ("mips", class_maintenance, var_zinteger,
+ &mips_debug, "Set mips debugging.\n\
+When non-zero, mips specific debugging is enabled.", &setdebuglist),
+ &showdebuglist);
}
+
projects / deliverable / binutils-gdb.git / blobdiff