/* Target-dependent code for the MIPS architecture, for GDB, the GNU Debugger.
Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
- 1997, 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+ 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software
+ Foundation, Inc.
Contributed by Alessandro Forin(af@cs.cmu.edu) at CMU
and by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin.
#include "osabi.h"
#include "mips-tdep.h"
#include "block.h"
-
+#include "reggroups.h"
#include "opcode/mips.h"
#include "elf/mips.h"
#include "elf-bfd.h"
#include "symcat.h"
+#include "sim-regno.h"
+#include "dis-asm.h"
+
+static void set_reg_offset (CORE_ADDR *saved_regs, int regnum, CORE_ADDR off);
+static struct type *mips_register_type (struct gdbarch *gdbarch, int regnum);
/* A useful bit in the CP0 status register (PS_REGNUM). */
/* This bit is set if we are emulating 32-bit FPRs on a 64-bit chip. */
};
struct frame_extra_info
- {
- mips_extra_func_info_t proc_desc;
- int num_args;
- };
+{
+ mips_extra_func_info_t proc_desc;
+ int num_args;
+};
/* Various MIPS ISA options (related to stack analysis) can be
overridden dynamically. Establish an enum/array for managing
FP_REGISTER_DOUBLE. */
enum mips_fpu_type
- {
- MIPS_FPU_DOUBLE, /* Full double precision floating point. */
- MIPS_FPU_SINGLE, /* Single precision floating point (R4650). */
- MIPS_FPU_NONE /* No floating point. */
- };
+{
+ MIPS_FPU_DOUBLE, /* Full double precision floating point. */
+ MIPS_FPU_SINGLE, /* Single precision floating point (R4650). */
+ MIPS_FPU_NONE /* No floating point. */
+};
#ifndef MIPS_DEFAULT_FPU_TYPE
#define MIPS_DEFAULT_FPU_TYPE MIPS_FPU_DOUBLE
/* MIPS specific per-architecture information */
struct gdbarch_tdep
- {
- /* from the elf header */
- int elf_flags;
-
- /* mips options */
- enum mips_abi mips_abi;
- enum mips_abi found_abi;
- enum mips_fpu_type mips_fpu_type;
- int mips_last_arg_regnum;
- int mips_last_fp_arg_regnum;
- int mips_default_saved_regsize;
- int mips_fp_register_double;
- int mips_default_stack_argsize;
- int gdb_target_is_mips64;
- int default_mask_address_p;
- };
+{
+ /* from the elf header */
+ int elf_flags;
+
+ /* mips options */
+ enum mips_abi mips_abi;
+ enum mips_abi found_abi;
+ enum mips_fpu_type mips_fpu_type;
+ int mips_last_arg_regnum;
+ int mips_last_fp_arg_regnum;
+ int mips_default_saved_regsize;
+ int mips_fp_register_double;
+ int mips_default_stack_argsize;
+ int default_mask_address_p;
+ /* Is the target using 64-bit raw integer registers but only
+ storing a left-aligned 32-bit value in each? */
+ int mips64_transfers_32bit_regs_p;
+ /* Indexes for various registers. IRIX and embedded have
+ different values. This contains the "public" fields. Don't
+ add any that do not need to be public. */
+ const struct mips_regnum *regnum;
+ /* Register names table for the current register set. */
+ const char **mips_processor_reg_names;
+};
+
+const struct mips_regnum *
+mips_regnum (struct gdbarch *gdbarch)
+{
+ return gdbarch_tdep (gdbarch)->regnum;
+}
+
+static int
+mips_fpa0_regnum (struct gdbarch *gdbarch)
+{
+ return mips_regnum (gdbarch)->fp0 + 12;
+}
#define MIPS_EABI (gdbarch_tdep (current_gdbarch)->mips_abi == MIPS_ABI_EABI32 \
|| gdbarch_tdep (current_gdbarch)->mips_abi == MIPS_ABI_EABI64)
#define MIPS_FPU_TYPE (gdbarch_tdep (current_gdbarch)->mips_fpu_type)
-/* Return the currently configured (or set) saved register size. */
+/* MIPS16 function addresses are odd (bit 0 is set). Here are some
+ functions to test, set, or clear bit 0 of addresses. */
-#define MIPS_DEFAULT_SAVED_REGSIZE (gdbarch_tdep (current_gdbarch)->mips_default_saved_regsize)
+static CORE_ADDR
+is_mips16_addr (CORE_ADDR addr)
+{
+ return ((addr) & 1);
+}
-static const char *mips_saved_regsize_string = size_auto;
+static CORE_ADDR
+make_mips16_addr (CORE_ADDR addr)
+{
+ return ((addr) | 1);
+}
-#define MIPS_SAVED_REGSIZE (mips_saved_regsize())
+static CORE_ADDR
+unmake_mips16_addr (CORE_ADDR addr)
+{
+ return ((addr) & ~1);
+}
+
+/* Return the contents of register REGNUM as a signed integer. */
+
+static LONGEST
+read_signed_register (int regnum)
+{
+ void *buf = alloca (register_size (current_gdbarch, regnum));
+ deprecated_read_register_gen (regnum, buf);
+ return (extract_signed_integer
+ (buf, register_size (current_gdbarch, regnum)));
+}
+
+static LONGEST
+read_signed_register_pid (int regnum, ptid_t ptid)
+{
+ ptid_t save_ptid;
+ LONGEST retval;
+
+ if (ptid_equal (ptid, inferior_ptid))
+ return read_signed_register (regnum);
+
+ save_ptid = inferior_ptid;
+
+ inferior_ptid = ptid;
+
+ retval = read_signed_register (regnum);
+
+ inferior_ptid = save_ptid;
+
+ return retval;
+}
/* Return the MIPS ABI associated with GDBARCH. */
enum mips_abi
return gdbarch_tdep (gdbarch)->mips_abi;
}
+int
+mips_regsize (struct gdbarch *gdbarch)
+{
+ return (gdbarch_bfd_arch_info (gdbarch)->bits_per_word
+ / gdbarch_bfd_arch_info (gdbarch)->bits_per_byte);
+}
+
+/* Return the currently configured (or set) saved register size. */
+
+static const char *mips_saved_regsize_string = size_auto;
+
static unsigned int
-mips_saved_regsize (void)
+mips_saved_regsize (struct gdbarch_tdep *tdep)
{
if (mips_saved_regsize_string == size_auto)
- return MIPS_DEFAULT_SAVED_REGSIZE;
+ return tdep->mips_default_saved_regsize;
else if (mips_saved_regsize_string == size_64)
return 8;
- else /* if (mips_saved_regsize_string == size_32) */
+ else /* if (mips_saved_regsize_string == size_32) */
return 4;
}
/* Functions for setting and testing a bit in a minimal symbol that
marks it as 16-bit function. The MSB of the minimal symbol's
- "info" field is used for this purpose. This field is already
- being used to store the symbol size, so the assumption is
- that the symbol size cannot exceed 2^31.
+ "info" field is used for this purpose.
ELF_MAKE_MSYMBOL_SPECIAL tests whether an ELF symbol is "special",
i.e. refers to a 16-bit function, and sets a "special" bit in a
minimal symbol to mark it as a 16-bit function
- MSYMBOL_IS_SPECIAL tests the "special" bit in a minimal symbol
- MSYMBOL_SIZE returns the size of the minimal symbol, i.e.
- the "info" field with the "special" bit masked out */
+ MSYMBOL_IS_SPECIAL tests the "special" bit in a minimal symbol */
static void
-mips_elf_make_msymbol_special (asymbol *sym, struct minimal_symbol *msym)
-{
- if (((elf_symbol_type *)(sym))->internal_elf_sym.st_other == STO_MIPS16)
- {
- MSYMBOL_INFO (msym) = (char *)
- (((long) MSYMBOL_INFO (msym)) | 0x80000000);
- SYMBOL_VALUE_ADDRESS (msym) |= 1;
- }
+mips_elf_make_msymbol_special (asymbol * sym, struct minimal_symbol *msym)
+{
+ if (((elf_symbol_type *) (sym))->internal_elf_sym.st_other == STO_MIPS16)
+ {
+ MSYMBOL_INFO (msym) = (char *)
+ (((long) MSYMBOL_INFO (msym)) | 0x80000000);
+ SYMBOL_VALUE_ADDRESS (msym) |= 1;
+ }
}
static int
return (((long) MSYMBOL_INFO (msym) & 0x80000000) != 0);
}
-static long
-msymbol_size (struct minimal_symbol *msym)
-{
- return ((long) MSYMBOL_INFO (msym) & 0x7fffffff);
-}
-
/* XFER a value from the big/little/left end of the register.
Depending on the size of the value it might occupy the entire
register or just part of it. Make an allowance for this, aligning
static void
mips_xfer_register (struct regcache *regcache, int reg_num, int length,
- enum bfd_endian endian, bfd_byte *in, const bfd_byte *out,
- int buf_offset)
+ enum bfd_endian endian, bfd_byte * in,
+ const bfd_byte * out, int buf_offset)
{
- bfd_byte *reg = alloca (MAX_REGISTER_RAW_SIZE);
+ bfd_byte reg[MAX_REGISTER_SIZE];
int reg_offset = 0;
+ gdb_assert (reg_num >= NUM_REGS);
/* Need to transfer the left or right part of the register, based on
the targets byte order. */
switch (endian)
{
case BFD_ENDIAN_BIG:
- reg_offset = REGISTER_RAW_SIZE (reg_num) - length;
+ reg_offset = register_size (current_gdbarch, reg_num) - length;
break;
case BFD_ENDIAN_LITTLE:
reg_offset = 0;
break;
- case BFD_ENDIAN_UNKNOWN: /* Indicates no alignment. */
+ case BFD_ENDIAN_UNKNOWN: /* Indicates no alignment. */
reg_offset = 0;
break;
default:
fprintf_unfiltered (gdb_stdlog, "%02x", out[buf_offset + i]);
}
if (in != NULL)
- regcache_raw_read_part (regcache, reg_num, reg_offset, length, in + buf_offset);
+ regcache_cooked_read_part (regcache, reg_num, reg_offset, length,
+ in + buf_offset);
if (out != NULL)
- regcache_raw_write_part (regcache, reg_num, reg_offset, length, out + buf_offset);
+ regcache_cooked_write_part (regcache, reg_num, reg_offset, length,
+ out + buf_offset);
if (mips_debug && in != NULL)
{
int i;
{
/* MIPS1 and MIPS2 have only 32 bit FPRs, and the FR bit is not
meaningful. */
- if (REGISTER_RAW_SIZE (FP0_REGNUM) == 4)
+ if (register_size (current_gdbarch, mips_regnum (current_gdbarch)->fp0) ==
+ 4)
return 0;
#if 0
/* Indicate that the ABI makes use of double-precision registers
provided by the FPU (rather than combining pairs of registers to
- form double-precision values). Do not use "TARGET_IS_MIPS64" to
- determine if the ABI is using double-precision registers. See also
- MIPS_FPU_TYPE. */
+ form double-precision values). See also MIPS_FPU_TYPE. */
#define FP_REGISTER_DOUBLE (gdbarch_tdep (current_gdbarch)->mips_fp_register_double)
/* The amount of space reserved on the stack for registers. This is
different to MIPS_SAVED_REGSIZE as it determines the alignment of
data allocated after the registers have run out. */
-#define MIPS_DEFAULT_STACK_ARGSIZE (gdbarch_tdep (current_gdbarch)->mips_default_stack_argsize)
-
-#define MIPS_STACK_ARGSIZE (mips_stack_argsize ())
-
static const char *mips_stack_argsize_string = size_auto;
static unsigned int
-mips_stack_argsize (void)
+mips_stack_argsize (struct gdbarch_tdep *tdep)
{
if (mips_stack_argsize_string == size_auto)
- return MIPS_DEFAULT_STACK_ARGSIZE;
+ return tdep->mips_default_stack_argsize;
else if (mips_stack_argsize_string == size_64)
return 8;
- else /* if (mips_stack_argsize_string == size_32) */
+ else /* if (mips_stack_argsize_string == size_32) */
return 4;
}
-#define GDB_TARGET_IS_MIPS64 (gdbarch_tdep (current_gdbarch)->gdb_target_is_mips64 + 0)
-
-#define MIPS_DEFAULT_MASK_ADDRESS_P (gdbarch_tdep (current_gdbarch)->default_mask_address_p)
-
#define VM_MIN_ADDRESS (CORE_ADDR)0x400000
-int gdb_print_insn_mips (bfd_vma, disassemble_info *);
-
-static void mips_print_register (int, int);
-
static mips_extra_func_info_t heuristic_proc_desc (CORE_ADDR, CORE_ADDR,
struct frame_info *, int);
static CORE_ADDR read_next_frame_reg (struct frame_info *, int);
-static int mips_set_processor_type (char *);
-
-static void mips_show_processor_type_command (char *, int);
-
static void reinit_frame_cache_sfunc (char *, int, struct cmd_list_element *);
static mips_extra_func_info_t find_proc_desc (CORE_ADDR pc,
static CORE_ADDR after_prologue (CORE_ADDR pc,
mips_extra_func_info_t proc_desc);
-static void mips_read_fp_register_single (int regno, char *rare_buffer);
-static void mips_read_fp_register_double (int regno, char *rare_buffer);
-
static struct type *mips_float_register_type (void);
static struct type *mips_double_register_type (void);
-/* This value is the model of MIPS in use. It is derived from the value
- of the PrID register. */
-
-char *mips_processor_type;
-
-char *tmp_mips_processor_type;
-
/* The list of available "set mips " and "show mips " commands */
static struct cmd_list_element *setmipscmdlist = NULL;
static struct cmd_list_element *showmipscmdlist = NULL;
-/* A set of original names, to be used when restoring back to generic
- registers from a specific set. */
-static char *mips_generic_reg_names[] = MIPS_REGISTER_NAMES;
-
/* Integer registers 0 thru 31 are handled explicitly by
mips_register_name(). Processor specific registers 32 and above
- are listed in the sets of register names assigned to
- mips_processor_reg_names. */
-static char **mips_processor_reg_names = mips_generic_reg_names;
+ are listed in the followign tables. */
+
+enum
+{ NUM_MIPS_PROCESSOR_REGS = (90 - 32) };
+
+/* Generic MIPS. */
+
+static const char *mips_generic_reg_names[NUM_MIPS_PROCESSOR_REGS] = {
+ "sr", "lo", "hi", "bad", "cause", "pc",
+ "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
+ "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
+ "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
+ "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
+ "fsr", "fir", "" /*"fp" */ , "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+};
+
+/* Names of IDT R3041 registers. */
+
+static const char *mips_r3041_reg_names[] = {
+ "sr", "lo", "hi", "bad", "cause", "pc",
+ "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
+ "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
+ "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
+ "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
+ "fsr", "fir", "", /*"fp" */ "",
+ "", "", "bus", "ccfg", "", "", "", "",
+ "", "", "port", "cmp", "", "", "epc", "prid",
+};
+
+/* Names of tx39 registers. */
+
+static const char *mips_tx39_reg_names[NUM_MIPS_PROCESSOR_REGS] = {
+ "sr", "lo", "hi", "bad", "cause", "pc",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "config", "cache", "debug", "depc", "epc", ""
+};
+
+/* Names of IRIX registers. */
+static const char *mips_irix_reg_names[NUM_MIPS_PROCESSOR_REGS] = {
+ "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
+ "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
+ "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
+ "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
+ "pc", "cause", "bad", "hi", "lo", "fsr", "fir"
+};
+
/* Return the name of the register corresponding to REGNO. */
static const char *
mips_register_name (int regno)
{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
/* GPR names for all ABIs other than n32/n64. */
static char *mips_gpr_names[] = {
- "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
- "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7",
- "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
- "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra",
+ "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
+ "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7",
+ "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
+ "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra",
};
/* GPR names for n32 and n64 ABIs. */
static char *mips_n32_n64_gpr_names[] = {
- "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
- "a4", "a5", "a6", "a7", "t0", "t1", "t2", "t3",
- "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
- "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra"
+ "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
+ "a4", "a5", "a6", "a7", "t0", "t1", "t2", "t3",
+ "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
+ "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra"
};
enum mips_abi abi = mips_abi (current_gdbarch);
+ /* Map [NUM_REGS .. 2*NUM_REGS) onto the raw registers, but then
+ don't make the raw register names visible. */
+ int rawnum = regno % NUM_REGS;
+ if (regno < NUM_REGS)
+ return "";
+
/* The MIPS integer registers are always mapped from 0 to 31. The
names of the registers (which reflects the conventions regarding
register use) vary depending on the ABI. */
- if (0 <= regno && regno < 32)
+ if (0 <= rawnum && rawnum < 32)
{
if (abi == MIPS_ABI_N32 || abi == MIPS_ABI_N64)
- return mips_n32_n64_gpr_names[regno];
+ return mips_n32_n64_gpr_names[rawnum];
else
- return mips_gpr_names[regno];
+ return mips_gpr_names[rawnum];
+ }
+ else if (32 <= rawnum && rawnum < NUM_REGS)
+ {
+ gdb_assert (rawnum - 32 < NUM_MIPS_PROCESSOR_REGS);
+ return tdep->mips_processor_reg_names[rawnum - 32];
}
- else if (32 <= regno && regno < NUM_REGS)
- return mips_processor_reg_names[regno - 32];
else
internal_error (__FILE__, __LINE__,
- "mips_register_name: bad register number %d", regno);
+ "mips_register_name: bad register number %d", rawnum);
}
-/* *INDENT-OFF* */
-/* Names of IDT R3041 registers. */
-
-char *mips_r3041_reg_names[] = {
- "sr", "lo", "hi", "bad", "cause","pc",
- "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
- "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
- "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
- "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
- "fsr", "fir", "",/*"fp"*/ "",
- "", "", "bus", "ccfg", "", "", "", "",
- "", "", "port", "cmp", "", "", "epc", "prid",
-};
-
-/* Names of IDT R3051 registers. */
-
-char *mips_r3051_reg_names[] = {
- "sr", "lo", "hi", "bad", "cause","pc",
- "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
- "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
- "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
- "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
- "fsr", "fir", ""/*"fp"*/, "",
- "inx", "rand", "elo", "", "ctxt", "", "", "",
- "", "", "ehi", "", "", "", "epc", "prid",
-};
-
-/* Names of IDT R3081 registers. */
-
-char *mips_r3081_reg_names[] = {
- "sr", "lo", "hi", "bad", "cause","pc",
- "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
- "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
- "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
- "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
- "fsr", "fir", ""/*"fp"*/, "",
- "inx", "rand", "elo", "cfg", "ctxt", "", "", "",
- "", "", "ehi", "", "", "", "epc", "prid",
-};
-
-/* Names of LSI 33k registers. */
-
-char *mips_lsi33k_reg_names[] = {
- "epc", "hi", "lo", "sr", "cause","badvaddr",
- "dcic", "bpc", "bda", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
-};
+/* Return the groups that a MIPS register can be categorised into. */
-struct {
- char *name;
- char **regnames;
-} mips_processor_type_table[] = {
- { "generic", mips_generic_reg_names },
- { "r3041", mips_r3041_reg_names },
- { "r3051", mips_r3051_reg_names },
- { "r3071", mips_r3081_reg_names },
- { "r3081", mips_r3081_reg_names },
- { "lsi33k", mips_lsi33k_reg_names },
- { NULL, NULL }
-};
-/* *INDENT-ON* */
+static int
+mips_register_reggroup_p (struct gdbarch *gdbarch, int regnum,
+ struct reggroup *reggroup)
+{
+ int vector_p;
+ int float_p;
+ int raw_p;
+ int rawnum = regnum % NUM_REGS;
+ int pseudo = regnum / NUM_REGS;
+ if (reggroup == all_reggroup)
+ return pseudo;
+ vector_p = TYPE_VECTOR (register_type (gdbarch, regnum));
+ float_p = TYPE_CODE (register_type (gdbarch, regnum)) == TYPE_CODE_FLT;
+ /* FIXME: cagney/2003-04-13: Can't yet use gdbarch_num_regs
+ (gdbarch), as not all architectures are multi-arch. */
+ raw_p = rawnum < NUM_REGS;
+ if (REGISTER_NAME (regnum) == NULL || REGISTER_NAME (regnum)[0] == '\0')
+ return 0;
+ if (reggroup == float_reggroup)
+ return float_p && pseudo;
+ if (reggroup == vector_reggroup)
+ return vector_p && pseudo;
+ if (reggroup == general_reggroup)
+ return (!vector_p && !float_p) && pseudo;
+ /* Save the pseudo registers. Need to make certain that any code
+ extracting register values from a saved register cache also uses
+ pseudo registers. */
+ if (reggroup == save_reggroup)
+ return raw_p && pseudo;
+ /* Restore the same pseudo register. */
+ if (reggroup == restore_reggroup)
+ return raw_p && pseudo;
+ return 0;
+}
+/* Map the symbol table registers which live in the range [1 *
+ NUM_REGS .. 2 * NUM_REGS) back onto the corresponding raw
+ registers. Take care of alignment and size problems. */
+static void
+mips_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache,
+ int cookednum, void *buf)
+{
+ int rawnum = cookednum % NUM_REGS;
+ gdb_assert (cookednum >= NUM_REGS && cookednum < 2 * NUM_REGS);
+ if (register_size (gdbarch, rawnum) == register_size (gdbarch, cookednum))
+ regcache_raw_read (regcache, rawnum, buf);
+ else if (register_size (gdbarch, rawnum) >
+ register_size (gdbarch, cookednum))
+ {
+ if (gdbarch_tdep (gdbarch)->mips64_transfers_32bit_regs_p
+ || TARGET_BYTE_ORDER == BFD_ENDIAN_LITTLE)
+ regcache_raw_read_part (regcache, rawnum, 0, 4, buf);
+ else
+ regcache_raw_read_part (regcache, rawnum, 4, 4, buf);
+ }
+ else
+ internal_error (__FILE__, __LINE__, "bad register size");
+}
+static void
+mips_pseudo_register_write (struct gdbarch *gdbarch,
+ struct regcache *regcache, int cookednum,
+ const void *buf)
+{
+ int rawnum = cookednum % NUM_REGS;
+ gdb_assert (cookednum >= NUM_REGS && cookednum < 2 * NUM_REGS);
+ if (register_size (gdbarch, rawnum) == register_size (gdbarch, cookednum))
+ regcache_raw_write (regcache, rawnum, buf);
+ else if (register_size (gdbarch, rawnum) >
+ register_size (gdbarch, cookednum))
+ {
+ if (gdbarch_tdep (gdbarch)->mips64_transfers_32bit_regs_p
+ || TARGET_BYTE_ORDER == BFD_ENDIAN_LITTLE)
+ regcache_raw_write_part (regcache, rawnum, 0, 4, buf);
+ else
+ regcache_raw_write_part (regcache, rawnum, 4, 4, buf);
+ }
+ else
+ internal_error (__FILE__, __LINE__, "bad register size");
+}
/* Table to translate MIPS16 register field to actual register number. */
-static int mips16_to_32_reg[8] =
-{16, 17, 2, 3, 4, 5, 6, 7};
+static int mips16_to_32_reg[8] = { 16, 17, 2, 3, 4, 5, 6, 7 };
/* Heuristic_proc_start may hunt through the text section for a long
time across a 2400 baud serial line. Allows the user to limit this
#define SET_PROC_DESC_IS_DUMMY(proc) ((proc)->pdr.isym = _PROC_MAGIC_)
struct linked_proc_info
- {
- struct mips_extra_func_info info;
- struct linked_proc_info *next;
- }
- *linked_proc_desc_table = NULL;
-
-void
-mips_print_extra_frame_info (struct frame_info *fi)
-{
- if (fi
- && get_frame_extra_info (fi)
- && get_frame_extra_info (fi)->proc_desc
- && get_frame_extra_info (fi)->proc_desc->pdr.framereg < NUM_REGS)
- printf_filtered (" frame pointer is at %s+%s\n",
- REGISTER_NAME (get_frame_extra_info (fi)->proc_desc->pdr.framereg),
- paddr_d (get_frame_extra_info (fi)->proc_desc->pdr.frameoffset));
+{
+ struct mips_extra_func_info info;
+ struct linked_proc_info *next;
}
+ *linked_proc_desc_table = NULL;
/* Number of bytes of storage in the actual machine representation for
- register N. NOTE: This indirectly defines the register size
- transfered by the GDB protocol. */
+ register N. NOTE: This defines the pseudo register type so need to
+ rebuild the architecture vector. */
static int mips64_transfers_32bit_regs_p = 0;
-static int
-mips_register_raw_size (int reg_nr)
-{
- if (mips64_transfers_32bit_regs_p)
- return REGISTER_VIRTUAL_SIZE (reg_nr);
- else if (reg_nr >= FP0_REGNUM && reg_nr < FP0_REGNUM + 32
- && FP_REGISTER_DOUBLE)
- /* For MIPS_ABI_N32 (for example) we need 8 byte floating point
- registers. */
- return 8;
- else
- return MIPS_REGSIZE;
+static void
+set_mips64_transfers_32bit_regs (char *args, int from_tty,
+ struct cmd_list_element *c)
+{
+ struct gdbarch_info info;
+ gdbarch_info_init (&info);
+ /* FIXME: cagney/2003-11-15: Should be setting a field in "info"
+ instead of relying on globals. Doing that would let generic code
+ handle the search for this specific architecture. */
+ if (!gdbarch_update_p (info))
+ {
+ mips64_transfers_32bit_regs_p = 0;
+ error ("32-bit compatibility mode not supported");
+ }
}
-/* Convert between RAW and VIRTUAL registers. The RAW register size
- defines the remote-gdb packet. */
+/* Convert to/from a register and the corresponding memory value. */
static int
-mips_register_convertible (int reg_nr)
+mips_convert_register_p (int regnum, struct type *type)
{
- if (mips64_transfers_32bit_regs_p)
- return 0;
- else
- return (REGISTER_RAW_SIZE (reg_nr) > REGISTER_VIRTUAL_SIZE (reg_nr));
+ return (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && register_size (current_gdbarch, regnum) == 4
+ && (regnum % NUM_REGS) >= mips_regnum (current_gdbarch)->fp0
+ && (regnum % NUM_REGS) < mips_regnum (current_gdbarch)->fp0 + 32
+ && TYPE_CODE (type) == TYPE_CODE_FLT && TYPE_LENGTH (type) == 8);
}
static void
-mips_register_convert_to_virtual (int n, struct type *virtual_type,
- char *raw_buf, char *virt_buf)
+mips_register_to_value (struct frame_info *frame, int regnum,
+ struct type *type, void *to)
{
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- memcpy (virt_buf,
- raw_buf + (REGISTER_RAW_SIZE (n) - TYPE_LENGTH (virtual_type)),
- TYPE_LENGTH (virtual_type));
- else
- memcpy (virt_buf,
- raw_buf,
- TYPE_LENGTH (virtual_type));
+ get_frame_register (frame, regnum + 0, (char *) to + 4);
+ get_frame_register (frame, regnum + 1, (char *) to + 0);
}
static void
-mips_register_convert_to_raw (struct type *virtual_type, int n,
- char *virt_buf, char *raw_buf)
-{
- memset (raw_buf, 0, REGISTER_RAW_SIZE (n));
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- memcpy (raw_buf + (REGISTER_RAW_SIZE (n) - TYPE_LENGTH (virtual_type)),
- virt_buf,
- TYPE_LENGTH (virtual_type));
- else
- memcpy (raw_buf,
- virt_buf,
- TYPE_LENGTH (virtual_type));
-}
-
-void
-mips_register_convert_to_type (int regnum, struct type *type, char *buffer)
+mips_value_to_register (struct frame_info *frame, int regnum,
+ struct type *type, const void *from)
{
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && REGISTER_RAW_SIZE (regnum) == 4
- && (regnum) >= FP0_REGNUM && (regnum) < FP0_REGNUM + 32
- && TYPE_CODE(type) == TYPE_CODE_FLT
- && TYPE_LENGTH(type) == 8)
- {
- char temp[4];
- memcpy (temp, ((char *)(buffer))+4, 4);
- memcpy (((char *)(buffer))+4, (buffer), 4);
- memcpy (((char *)(buffer)), temp, 4);
- }
-}
-
-void
-mips_register_convert_from_type (int regnum, struct type *type, char *buffer)
-{
-if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && REGISTER_RAW_SIZE (regnum) == 4
- && (regnum) >= FP0_REGNUM && (regnum) < FP0_REGNUM + 32
- && TYPE_CODE(type) == TYPE_CODE_FLT
- && TYPE_LENGTH(type) == 8)
- {
- char temp[4];
- memcpy (temp, ((char *)(buffer))+4, 4);
- memcpy (((char *)(buffer))+4, (buffer), 4);
- memcpy (((char *)(buffer)), temp, 4);
- }
+ put_frame_register (frame, regnum + 0, (const char *) from + 4);
+ put_frame_register (frame, regnum + 1, (const char *) from + 0);
}
-/* Return the GDB type object for the "standard" data type
- of data in register REG.
-
- Note: kevinb/2002-08-01: The definition below should faithfully
- reproduce the behavior of each of the REGISTER_VIRTUAL_TYPE
- definitions found in config/mips/tm-*.h. I'm concerned about the
- ``FCRCS_REGNUM <= reg && reg <= LAST_EMBED_REGNUM'' clause though.
- In some cases DEPRECATED_FP_REGNUM is in this range, and I doubt
- that this code is correct for the 64-bit case. */
+/* Return the GDB type object for the "standard" data type of data in
+ register REG. */
static struct type *
-mips_register_virtual_type (int reg)
+mips_register_type (struct gdbarch *gdbarch, int regnum)
{
- if (FP0_REGNUM <= reg && reg < FP0_REGNUM + 32)
+ gdb_assert (regnum >= 0 && regnum < 2 * NUM_REGS);
+ if ((regnum % NUM_REGS) >= mips_regnum (current_gdbarch)->fp0
+ && (regnum % NUM_REGS) < mips_regnum (current_gdbarch)->fp0 + 32)
{
- /* Floating point registers... */
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- return builtin_type_ieee_double_big;
- else
- return builtin_type_ieee_double_little;
+ /* The floating-point registers raw, or cooked, always match
+ mips_regsize(), and also map 1:1, byte for byte. */
+ switch (gdbarch_byte_order (gdbarch))
+ {
+ case BFD_ENDIAN_BIG:
+ if (mips_regsize (gdbarch) == 4)
+ return builtin_type_ieee_single_big;
+ else
+ return builtin_type_ieee_double_big;
+ case BFD_ENDIAN_LITTLE:
+ if (mips_regsize (gdbarch) == 4)
+ return builtin_type_ieee_single_little;
+ else
+ return builtin_type_ieee_double_little;
+ case BFD_ENDIAN_UNKNOWN:
+ default:
+ internal_error (__FILE__, __LINE__, "bad switch");
+ }
}
- else if (reg == PS_REGNUM /* CR */)
- return builtin_type_uint32;
- else if (FCRCS_REGNUM <= reg && reg <= LAST_EMBED_REGNUM)
- return builtin_type_uint32;
+ else if (regnum >=
+ (NUM_REGS + mips_regnum (current_gdbarch)->fp_control_status)
+ && regnum <= NUM_REGS + LAST_EMBED_REGNUM)
+ /* The pseudo/cooked view of the embedded registers is always
+ 32-bit. The raw view is handled below. */
+ return builtin_type_int32;
+ else if (regnum >= NUM_REGS && mips_regsize (gdbarch)
+ && gdbarch_tdep (gdbarch)->mips64_transfers_32bit_regs_p)
+ /* The target, while using a 64-bit register buffer, is only
+ transfering 32-bits of each integer register. Reflect this in
+ the cooked/pseudo register value. */
+ return builtin_type_int32;
+ else if (mips_regsize (gdbarch) == 8)
+ /* 64-bit ISA. */
+ return builtin_type_int64;
else
- {
- /* Everything else...
- Return type appropriate for width of register. */
- if (MIPS_REGSIZE == TYPE_LENGTH (builtin_type_uint64))
- return builtin_type_uint64;
- else
- return builtin_type_uint32;
- }
+ /* 32-bit ISA. */
+ return builtin_type_int32;
}
/* TARGET_READ_SP -- Remove useless bits from the stack pointer. */
enum auto_boolean mask_address_var = AUTO_BOOLEAN_AUTO;
static int
-mips_mask_address_p (void)
+mips_mask_address_p (struct gdbarch_tdep *tdep)
{
switch (mask_address_var)
{
return 0;
break;
case AUTO_BOOLEAN_AUTO:
- return MIPS_DEFAULT_MASK_ADDRESS_P;
+ return tdep->default_mask_address_p;
default:
- internal_error (__FILE__, __LINE__,
- "mips_mask_address_p: bad switch");
+ internal_error (__FILE__, __LINE__, "mips_mask_address_p: bad switch");
return -1;
}
}
static void
show_mask_address (char *cmd, int from_tty, struct cmd_list_element *c)
{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
switch (mask_address_var)
{
case AUTO_BOOLEAN_TRUE:
printf_filtered ("The 32 bit mips address mask is disabled\n");
break;
case AUTO_BOOLEAN_AUTO:
- printf_filtered ("The 32 bit address mask is set automatically. Currently %s\n",
- mips_mask_address_p () ? "enabled" : "disabled");
+ printf_filtered
+ ("The 32 bit address mask is set automatically. Currently %s\n",
+ mips_mask_address_p (tdep) ? "enabled" : "disabled");
break;
default:
- internal_error (__FILE__, __LINE__,
- "show_mask_address: bad switch");
+ internal_error (__FILE__, __LINE__, "show_mask_address: bad switch");
break;
}
}
-/* Should call_function allocate stack space for a struct return? */
-
-static int
-mips_eabi_use_struct_convention (int gcc_p, struct type *type)
-{
- return (TYPE_LENGTH (type) > 2 * MIPS_SAVED_REGSIZE);
-}
-
-static int
-mips_n32n64_use_struct_convention (int gcc_p, struct type *type)
-{
- return (TYPE_LENGTH (type) > 2 * MIPS_SAVED_REGSIZE);
-}
-
-static int
-mips_o32_use_struct_convention (int gcc_p, struct type *type)
-{
- return 1; /* Structures are returned by ref in extra arg0. */
-}
-
-/* Should call_function pass struct by reference?
- For each architecture, structs are passed either by
- value or by reference, depending on their size. */
-
-static int
-mips_eabi_reg_struct_has_addr (int gcc_p, struct type *type)
-{
- enum type_code typecode = TYPE_CODE (check_typedef (type));
- int len = TYPE_LENGTH (check_typedef (type));
-
- if (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION)
- return (len > MIPS_SAVED_REGSIZE);
-
- return 0;
-}
-
-static int
-mips_n32n64_reg_struct_has_addr (int gcc_p, struct type *type)
-{
- return 0; /* Assumption: N32/N64 never passes struct by ref. */
-}
-
-static int
-mips_o32_reg_struct_has_addr (int gcc_p, struct type *type)
-{
- return 0; /* Assumption: O32/O64 never passes struct by ref. */
-}
-
/* Tell if the program counter value in MEMADDR is in a MIPS16 function. */
static int
struct minimal_symbol *sym;
/* If bit 0 of the address is set, assume this is a MIPS16 address. */
- if (IS_MIPS16_ADDR (memaddr))
+ if (is_mips16_addr (memaddr))
return 1;
/* A flag indicating that this is a MIPS16 function is stored by elfread.c in
static CORE_ADDR
mips_read_pc (ptid_t ptid)
{
- return read_signed_register_pid (PC_REGNUM, ptid);
+ return read_signed_register_pid (mips_regnum (current_gdbarch)->pc, ptid);
+}
+
+static void
+mips_write_pc (CORE_ADDR pc, ptid_t ptid)
+{
+ write_register_pid (mips_regnum (current_gdbarch)->pc, pc, ptid);
}
/* This returns the PC of the first inst after the prologue. If we can't
find the prologue, then return 0. */
static CORE_ADDR
-after_prologue (CORE_ADDR pc,
- mips_extra_func_info_t proc_desc)
+after_prologue (CORE_ADDR pc, mips_extra_func_info_t proc_desc)
{
struct symtab_and_line sal;
CORE_ADDR func_addr, func_end;
{
int reg;
- if ((inst & 0xffe00000) == 0xafa00000 /* sw reg,n($sp) */
+ if ((inst & 0xffe00000) == 0xafa00000 /* sw reg,n($sp) */
|| (inst & 0xffe00000) == 0xafc00000 /* sw reg,n($r30) */
|| (inst & 0xffe00000) == 0xffa00000) /* sd reg,n($sp) */
{
*gen_mask |= (1 << reg);
}
else if ((inst & 0xffe00000) == 0xe7a00000 /* swc1 freg,n($sp) */
- || (inst & 0xffe00000) == 0xe7c00000 /* swc1 freg,n($r30) */
+ || (inst & 0xffe00000) == 0xe7c00000 /* swc1 freg,n($r30) */
|| (inst & 0xffe00000) == 0xf7a00000) /* sdc1 freg,n($sp) */
{
if (pc_is_mips16 (addr))
{
instlen = MIPS16_INSTLEN;
- addr = UNMAKE_MIPS16_ADDR (addr);
+ addr = unmake_mips16_addr (addr);
}
else
instlen = MIPS_INSTLEN;
if ((inst & 0xe0000000) != 0) /* Not a special, jump or branch instruction */
{
if (itype_op (inst) >> 2 == 5)
- /* BEQL, BNEL, BLEZL, BGTZL: bits 0101xx */
+ /* BEQL, BNEL, BLEZL, BGTZL: bits 0101xx */
{
op = (itype_op (inst) & 0x03);
switch (op)
}
}
else if (itype_op (inst) == 17 && itype_rs (inst) == 8)
- /* BC1F, BC1FL, BC1T, BC1TL: 010001 01000 */
+ /* BC1F, BC1FL, BC1T, BC1TL: 010001 01000 */
{
int tf = itype_rt (inst) & 0x01;
int cnum = itype_rt (inst) >> 2;
- int fcrcs = read_signed_register (FCRCS_REGNUM);
+ int fcrcs =
+ read_signed_register (mips_regnum (current_gdbarch)->
+ fp_control_status);
int cond = ((fcrcs >> 24) & 0x0e) | ((fcrcs >> 23) & 0x01);
if (((cond >> cnum) & 0x01) == tf)
pc += 4;
}
- break; /* end SPECIAL */
+ break; /* end SPECIAL */
case 1: /* REGIMM */
{
op = itype_rt (inst); /* branch condition */
case 3: /* BGEZL */
case 17: /* BGEZAL */
case 19: /* BGEZALL */
- greater_equal_branch:
if (read_signed_register (itype_rs (inst)) >= 0)
pc += mips32_relative_offset (inst) + 4;
else
pc += 4;
}
}
- break; /* end REGIMM */
+ break; /* end REGIMM */
case 2: /* J */
case 3: /* JAL */
{
pc += 8;
break;
case 6: /* BLEZ, BLEZL */
- less_zero_branch:
if (read_signed_register (itype_rs (inst) <= 0))
pc += mips32_relative_offset (inst) + 4;
else
/* I am heaping all the fields of the formats into one structure and
then, only the fields which are involved in instruction extension */
struct upk_mips16
- {
- CORE_ADDR offset;
- unsigned int regx; /* Function in i8 type */
- unsigned int regy;
- };
+{
+ CORE_ADDR offset;
+ unsigned int regx; /* Function in i8 type */
+ unsigned int regy;
+};
/* The EXT-I, EXT-ri nad EXT-I8 instructions all have the same format
unpack_mips16 (CORE_ADDR pc,
unsigned int extension,
unsigned int inst,
- enum mips16_inst_fmts insn_format,
- struct upk_mips16 *upk)
+ enum mips16_inst_fmts insn_format, struct upk_mips16 *upk)
{
CORE_ADDR offset;
int regx;
{
value = extended_offset (extension);
value = value << 11; /* rom for the original value */
- value |= inst & 0x7ff; /* eleven bits from instruction */
+ value |= inst & 0x7ff; /* eleven bits from instruction */
}
else
{
break;
}
default:
- internal_error (__FILE__, __LINE__,
- "bad switch");
+ internal_error (__FILE__, __LINE__, "bad switch");
}
upk->offset = offset;
upk->regx = regx;
static CORE_ADDR
extended_mips16_next_pc (CORE_ADDR pc,
- unsigned int extension,
- unsigned int insn)
+ unsigned int extension, unsigned int insn)
{
int op = (insn >> 11);
switch (op)
{
- case 2: /* Branch */
+ case 2: /* Branch */
{
CORE_ADDR offset;
struct upk_mips16 upk;
pc += (offset << 1) + 2;
break;
}
- case 3: /* JAL , JALX - Watch out, these are 32 bit instruction */
+ case 3: /* JAL , JALX - Watch out, these are 32 bit instruction */
{
struct upk_mips16 upk;
unpack_mips16 (pc, extension, insn, jalxtype, &upk);
pc |= 0x01;
break;
}
- case 4: /* beqz */
+ case 4: /* beqz */
{
struct upk_mips16 upk;
int reg;
pc += 2;
break;
}
- case 5: /* bnez */
+ case 5: /* bnez */
{
struct upk_mips16 upk;
int reg;
pc += 2;
break;
}
- case 12: /* I8 Formats btez btnez */
+ case 12: /* I8 Formats btez btnez */
{
struct upk_mips16 upk;
int reg;
pc += 2;
break;
}
- case 29: /* RR Formats JR, JALR, JALR-RA */
+ case 29: /* RR Formats JR, JALR, JALR-RA */
{
struct upk_mips16 upk;
/* upk.fmt = rrtype; */
break;
case 1:
reg = 31;
- break; /* Function return instruction */
+ break; /* Function return instruction */
case 2:
reg = upk.regx;
break;
default:
reg = 31;
- break; /* BOGUS Guess */
+ break; /* BOGUS Guess */
}
pc = read_signed_register (reg);
}
return mips32_next_pc (pc);
}
-/* Guaranteed to set fci->saved_regs to some values (it never leaves it
- NULL).
-
- Note: kevinb/2002-08-09: The only caller of this function is (and
- should remain) mips_frame_init_saved_regs(). In fact,
- aside from calling mips_find_saved_regs(), mips_frame_init_saved_regs()
- does nothing more than set frame->saved_regs[SP_REGNUM]. These two
- functions should really be combined and now that there is only one
- caller, it should be straightforward. (Watch out for multiple returns
- though.) */
+/* Set up the 'saved_regs' array. This is a data structure containing
+ the addresses on the stack where each register has been saved, for
+ each stack frame. Registers that have not been saved will have
+ zero here. The stack pointer register is special: rather than the
+ address where the stack register has been saved,
+ saved_regs[SP_REGNUM] will have the actual value of the previous
+ frame's stack register. */
static void
mips_find_saved_regs (struct frame_info *fci)
{
int ireg;
- CORE_ADDR reg_position;
/* r0 bit means kernel trap */
int kernel_trap;
/* What registers have been saved? Bitmasks. */
unsigned long gen_mask, float_mask;
mips_extra_func_info_t proc_desc;
t_inst inst;
+ CORE_ADDR *saved_regs;
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
- frame_saved_regs_zalloc (fci);
+ if (deprecated_get_frame_saved_regs (fci) != NULL)
+ return;
+ saved_regs = frame_saved_regs_zalloc (fci);
/* If it is the frame for sigtramp, the saved registers are located
- in a sigcontext structure somewhere on the stack.
- If the stack layout for sigtramp changes we might have to change these
- constants and the companion fixup_sigtramp in mdebugread.c */
+ in a sigcontext structure somewhere on the stack. If the stack
+ layout for sigtramp changes we might have to change these
+ constants and the companion fixup_sigtramp in mdebugread.c */
#ifndef SIGFRAME_BASE
-/* To satisfy alignment restrictions, sigcontext is located 4 bytes
- above the sigtramp frame. */
-#define SIGFRAME_BASE MIPS_REGSIZE
+ /* To satisfy alignment restrictions, sigcontext is located 4 bytes
+ above the sigtramp frame. */
+#define SIGFRAME_BASE mips_regsize (current_gdbarch)
/* FIXME! Are these correct?? */
-#define SIGFRAME_PC_OFF (SIGFRAME_BASE + 2 * MIPS_REGSIZE)
-#define SIGFRAME_REGSAVE_OFF (SIGFRAME_BASE + 3 * MIPS_REGSIZE)
+#define SIGFRAME_PC_OFF (SIGFRAME_BASE + 2 * mips_regsize (current_gdbarch))
+#define SIGFRAME_REGSAVE_OFF (SIGFRAME_BASE + 3 * mips_regsize (current_gdbarch))
#define SIGFRAME_FPREGSAVE_OFF \
- (SIGFRAME_REGSAVE_OFF + MIPS_NUMREGS * MIPS_REGSIZE + 3 * MIPS_REGSIZE)
-#endif
-#ifndef SIGFRAME_REG_SIZE
-/* FIXME! Is this correct?? */
-#define SIGFRAME_REG_SIZE MIPS_REGSIZE
+ (SIGFRAME_REGSAVE_OFF + MIPS_NUMREGS * mips_regsize (current_gdbarch) + 3 * mips_regsize (current_gdbarch))
#endif
if ((get_frame_type (fci) == SIGTRAMP_FRAME))
{
for (ireg = 0; ireg < MIPS_NUMREGS; ireg++)
{
- reg_position = get_frame_base (fci) + SIGFRAME_REGSAVE_OFF
- + ireg * SIGFRAME_REG_SIZE;
- get_frame_saved_regs (fci)[ireg] = reg_position;
+ CORE_ADDR reg_position =
+ (get_frame_base (fci) + SIGFRAME_REGSAVE_OFF +
+ ireg * mips_regsize (current_gdbarch));
+ set_reg_offset (saved_regs, ireg, reg_position);
}
for (ireg = 0; ireg < MIPS_NUMREGS; ireg++)
{
- reg_position = get_frame_base (fci) + SIGFRAME_FPREGSAVE_OFF
- + ireg * SIGFRAME_REG_SIZE;
- get_frame_saved_regs (fci)[FP0_REGNUM + ireg] = reg_position;
+ CORE_ADDR reg_position = (get_frame_base (fci)
+ + SIGFRAME_FPREGSAVE_OFF
+ + ireg * mips_regsize (current_gdbarch));
+ set_reg_offset (saved_regs,
+ mips_regnum (current_gdbarch)->fp0 + ireg,
+ reg_position);
}
- get_frame_saved_regs (fci)[PC_REGNUM] = get_frame_base (fci) + SIGFRAME_PC_OFF;
+
+ set_reg_offset (saved_regs, mips_regnum (current_gdbarch)->pc,
+ get_frame_base (fci) + SIGFRAME_PC_OFF);
+ /* SP_REGNUM, contains the value and not the address. */
+ set_reg_offset (saved_regs, SP_REGNUM, get_frame_base (fci));
return;
}
proc_desc = get_frame_extra_info (fci)->proc_desc;
if (proc_desc == NULL)
- /* I'm not sure how/whether this can happen. Normally when we can't
- find a proc_desc, we "synthesize" one using heuristic_proc_desc
- and set the saved_regs right away. */
+ /* I'm not sure how/whether this can happen. Normally when we
+ can't find a proc_desc, we "synthesize" one using
+ heuristic_proc_desc and set the saved_regs right away. */
return;
kernel_trap = PROC_REG_MASK (proc_desc) & 1;
gen_mask = kernel_trap ? 0xFFFFFFFF : PROC_REG_MASK (proc_desc);
float_mask = kernel_trap ? 0xFFFFFFFF : PROC_FREG_MASK (proc_desc);
- if ( /* In any frame other than the innermost or a frame interrupted by
- a signal, we assume that all registers have been saved.
- This assumes that all register saves in a function happen before
- the first function call. */
+ if ( /* In any frame other than the innermost or a frame interrupted
+ by a signal, we assume that all registers have been saved.
+ This assumes that all register saves in a function happen
+ before the first function call. */
(get_next_frame (fci) == NULL
|| (get_frame_type (get_next_frame (fci)) == SIGTRAMP_FRAME))
-
- /* In a dummy frame we know exactly where things are saved. */
+ /* In a dummy frame we know exactly where things are saved. */
&& !PROC_DESC_IS_DUMMY (proc_desc)
-
- /* Don't bother unless we are inside a function prologue. Outside the
- prologue, we know where everything is. */
-
+ /* Don't bother unless we are inside a function prologue.
+ Outside the prologue, we know where everything is. */
&& in_prologue (get_frame_pc (fci), PROC_LOW_ADDR (proc_desc))
-
- /* Not sure exactly what kernel_trap means, but if it means
- the kernel saves the registers without a prologue doing it,
- we better not examine the prologue to see whether registers
- have been saved yet. */
+ /* Not sure exactly what kernel_trap means, but if it means the
+ kernel saves the registers without a prologue doing it, we
+ better not examine the prologue to see whether registers
+ have been saved yet. */
&& !kernel_trap)
{
- /* We need to figure out whether the registers that the proc_desc
- claims are saved have been saved yet. */
+ /* We need to figure out whether the registers that the
+ proc_desc claims are saved have been saved yet. */
CORE_ADDR addr;
addr = PROC_LOW_ADDR (proc_desc);
instlen = pc_is_mips16 (addr) ? MIPS16_INSTLEN : MIPS_INSTLEN;
- /* Scan through this function's instructions preceding the current
- PC, and look for those that save registers. */
+ /* Scan through this function's instructions preceding the
+ current PC, and look for those that save registers. */
while (addr < get_frame_pc (fci))
{
inst = mips_fetch_instruction (addr);
float_mask = float_save_found;
}
- /* Fill in the offsets for the registers which gen_mask says
- were saved. */
- reg_position = get_frame_base (fci) + PROC_REG_OFFSET (proc_desc);
- for (ireg = MIPS_NUMREGS - 1; gen_mask; --ireg, gen_mask <<= 1)
- if (gen_mask & 0x80000000)
- {
- get_frame_saved_regs (fci)[ireg] = reg_position;
- reg_position -= MIPS_SAVED_REGSIZE;
- }
+ /* Fill in the offsets for the registers which gen_mask says were
+ saved. */
+ {
+ CORE_ADDR reg_position = (get_frame_base (fci)
+ + PROC_REG_OFFSET (proc_desc));
+ for (ireg = MIPS_NUMREGS - 1; gen_mask; --ireg, gen_mask <<= 1)
+ if (gen_mask & 0x80000000)
+ {
+ set_reg_offset (saved_regs, ireg, reg_position);
+ reg_position -= mips_saved_regsize (tdep);
+ }
+ }
- /* The MIPS16 entry instruction saves $s0 and $s1 in the reverse order
- of that normally used by gcc. Therefore, we have to fetch the first
- instruction of the function, and if it's an entry instruction that
- saves $s0 or $s1, correct their saved addresses. */
+ /* The MIPS16 entry instruction saves $s0 and $s1 in the reverse
+ order of that normally used by gcc. Therefore, we have to fetch
+ the first instruction of the function, and if it's an entry
+ instruction that saves $s0 or $s1, correct their saved addresses. */
if (pc_is_mips16 (PROC_LOW_ADDR (proc_desc)))
{
inst = mips_fetch_instruction (PROC_LOW_ADDR (proc_desc));
- if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
+ if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700)
+ /* entry */
{
int reg;
int sreg_count = (inst >> 6) & 3;
/* Check if the ra register was pushed on the stack. */
- reg_position = get_frame_base (fci) + PROC_REG_OFFSET (proc_desc);
+ CORE_ADDR reg_position = (get_frame_base (fci)
+ + PROC_REG_OFFSET (proc_desc));
if (inst & 0x20)
- reg_position -= MIPS_SAVED_REGSIZE;
+ reg_position -= mips_saved_regsize (tdep);
- /* Check if the s0 and s1 registers were pushed on the stack. */
+ /* Check if the s0 and s1 registers were pushed on the
+ stack. */
for (reg = 16; reg < sreg_count + 16; reg++)
{
- get_frame_saved_regs (fci)[reg] = reg_position;
- reg_position -= MIPS_SAVED_REGSIZE;
+ set_reg_offset (saved_regs, reg, reg_position);
+ reg_position -= mips_saved_regsize (tdep);
}
}
}
- /* Fill in the offsets for the registers which float_mask says
- were saved. */
- reg_position = get_frame_base (fci) + PROC_FREG_OFFSET (proc_desc);
-
- /* Apparently, the freg_offset gives the offset to the first 64 bit
- saved.
-
- When the ABI specifies 64 bit saved registers, the FREG_OFFSET
- designates the first saved 64 bit register.
-
- When the ABI specifies 32 bit saved registers, the ``64 bit saved
- DOUBLE'' consists of two adjacent 32 bit registers, Hence
- FREG_OFFSET, designates the address of the lower register of the
- register pair. Adjust the offset so that it designates the upper
- register of the pair -- i.e., the address of the first saved 32
- bit register. */
-
- if (MIPS_SAVED_REGSIZE == 4)
- reg_position += MIPS_SAVED_REGSIZE;
-
- /* Fill in the offsets for the float registers which float_mask says
- were saved. */
- for (ireg = MIPS_NUMREGS - 1; float_mask; --ireg, float_mask <<= 1)
- if (float_mask & 0x80000000)
- {
- get_frame_saved_regs (fci)[FP0_REGNUM + ireg] = reg_position;
- reg_position -= MIPS_SAVED_REGSIZE;
- }
+ /* Fill in the offsets for the registers which float_mask says were
+ saved. */
+ {
+ CORE_ADDR reg_position = (get_frame_base (fci)
+ + PROC_FREG_OFFSET (proc_desc));
- get_frame_saved_regs (fci)[PC_REGNUM] = get_frame_saved_regs (fci)[RA_REGNUM];
-}
+ /* Fill in the offsets for the float registers which float_mask
+ says were saved. */
+ for (ireg = MIPS_NUMREGS - 1; float_mask; --ireg, float_mask <<= 1)
+ if (float_mask & 0x80000000)
+ {
+ if (mips_saved_regsize (tdep) == 4
+ && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ /* On a big endian 32 bit ABI, floating point registers
+ are paired to form doubles such that the most
+ significant part is in $f[N+1] and the least
+ significant in $f[N] vis: $f[N+1] ||| $f[N]. The
+ registers are also spilled as a pair and stored as a
+ double.
+
+ When little-endian the least significant part is
+ stored first leading to the memory order $f[N] and
+ then $f[N+1].
+
+ Unfortunately, when big-endian the most significant
+ part of the double is stored first, and the least
+ significant is stored second. This leads to the
+ registers being ordered in memory as firt $f[N+1] and
+ then $f[N].
+
+ For the big-endian case make certain that the
+ addresses point at the correct (swapped) locations
+ $f[N] and $f[N+1] pair (keep in mind that
+ reg_position is decremented each time through the
+ loop). */
+ if ((ireg & 1))
+ set_reg_offset (saved_regs,
+ mips_regnum (current_gdbarch)->fp0 + ireg,
+ reg_position - mips_saved_regsize (tdep));
+ else
+ set_reg_offset (saved_regs,
+ mips_regnum (current_gdbarch)->fp0 + ireg,
+ reg_position + mips_saved_regsize (tdep));
+ }
+ else
+ set_reg_offset (saved_regs,
+ mips_regnum (current_gdbarch)->fp0 + ireg,
+ reg_position);
+ reg_position -= mips_saved_regsize (tdep);
+ }
-/* Set up the 'saved_regs' array. This is a data structure containing
- the addresses on the stack where each register has been saved, for
- each stack frame. Registers that have not been saved will have
- zero here. The stack pointer register is special: rather than the
- address where the stack register has been saved, saved_regs[SP_REGNUM]
- will have the actual value of the previous frame's stack register. */
+ set_reg_offset (saved_regs, mips_regnum (current_gdbarch)->pc,
+ saved_regs[RA_REGNUM]);
+ }
-static void
-mips_frame_init_saved_regs (struct frame_info *frame)
-{
- if (get_frame_saved_regs (frame) == NULL)
- {
- mips_find_saved_regs (frame);
- }
- get_frame_saved_regs (frame)[SP_REGNUM] = get_frame_base (frame);
+ /* SP_REGNUM, contains the value and not the address. */
+ set_reg_offset (saved_regs, SP_REGNUM, get_frame_base (fci));
}
static CORE_ADDR
read_next_frame_reg (struct frame_info *fi, int regno)
{
- int optimized;
- CORE_ADDR addr;
- int realnum;
- enum lval_type lval;
- void *raw_buffer = alloca (MAX_REGISTER_RAW_SIZE);
-
+ /* Always a pseudo. */
+ gdb_assert (regno >= NUM_REGS);
if (fi == NULL)
{
- regcache_cooked_read (current_regcache, regno, raw_buffer);
+ LONGEST val;
+ regcache_cooked_read_signed (current_regcache, regno, &val);
+ return val;
}
+ else if ((regno % NUM_REGS) == SP_REGNUM)
+ /* The SP_REGNUM is special, its value is stored in saved_regs.
+ In fact, it is so special that it can even only be fetched
+ using a raw register number! Once this code as been converted
+ to frame-unwind the problem goes away. */
+ return frame_unwind_register_signed (fi, regno % NUM_REGS);
else
- {
- frame_register_unwind (fi, regno, &optimized, &lval, &addr, &realnum,
- raw_buffer);
- /* FIXME: cagney/2002-09-13: This is just soooo bad. The MIPS
- should have a pseudo register range that correspons to the ABI's,
- rather than the ISA's, view of registers. These registers would
- then implicitly describe their size and hence could be used
- without the below munging. */
- if (lval == lval_memory)
- {
- if (regno < 32)
- {
- /* Only MIPS_SAVED_REGSIZE bytes of GP registers are
- saved. */
- return read_memory_integer (addr, MIPS_SAVED_REGSIZE);
- }
- }
- }
+ return frame_unwind_register_signed (fi, regno);
- return extract_signed_integer (raw_buffer, REGISTER_VIRTUAL_SIZE (regno));
}
/* mips_addr_bits_remove - remove useless address bits */
static CORE_ADDR
mips_addr_bits_remove (CORE_ADDR addr)
{
- if (GDB_TARGET_IS_MIPS64)
- {
- if (mips_mask_address_p () && (addr >> 32 == (CORE_ADDR) 0xffffffff))
- {
- /* This hack is a work-around for existing boards using
- PMON, the simulator, and any other 64-bit targets that
- doesn't have true 64-bit addressing. On these targets,
- the upper 32 bits of addresses are ignored by the
- hardware. Thus, the PC or SP are likely to have been
- sign extended to all 1s by instruction sequences that
- load 32-bit addresses. For example, a typical piece of
- code that loads an address is this:
- lui $r2, <upper 16 bits>
- ori $r2, <lower 16 bits>
- But the lui sign-extends the value such that the upper 32
- bits may be all 1s. The workaround is simply to mask off
- these bits. In the future, gcc may be changed to support
- true 64-bit addressing, and this masking will have to be
- disabled. */
- addr &= (CORE_ADDR) 0xffffffff;
- }
- }
- else if (mips_mask_address_p ())
- {
- /* FIXME: This is wrong! mips_addr_bits_remove() shouldn't be
- masking off bits, instead, the actual target should be asking
- for the address to be converted to a valid pointer. */
- /* Even when GDB is configured for some 32-bit targets
- (e.g. mips-elf), BFD is configured to handle 64-bit targets,
- so CORE_ADDR is 64 bits. So we still have to mask off
- useless bits from addresses. */
- addr &= (CORE_ADDR) 0xffffffff;
- }
- return addr;
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ if (mips_mask_address_p (tdep) && (((ULONGEST) addr) >> 32 == 0xffffffffUL))
+ /* This hack is a work-around for existing boards using PMON, the
+ simulator, and any other 64-bit targets that doesn't have true
+ 64-bit addressing. On these targets, the upper 32 bits of
+ addresses are ignored by the hardware. Thus, the PC or SP are
+ likely to have been sign extended to all 1s by instruction
+ sequences that load 32-bit addresses. For example, a typical
+ piece of code that loads an address is this:
+
+ lui $r2, <upper 16 bits>
+ ori $r2, <lower 16 bits>
+
+ But the lui sign-extends the value such that the upper 32 bits
+ may be all 1s. The workaround is simply to mask off these
+ bits. In the future, gcc may be changed to support true 64-bit
+ addressing, and this masking will have to be disabled. */
+ return addr &= 0xffffffffUL;
+ else
+ return addr;
}
/* mips_software_single_step() is called just before we want to resume
if (insert_breakpoints_p)
{
- pc = read_register (PC_REGNUM);
+ pc = read_register (mips_regnum (current_gdbarch)->pc);
next_pc = mips_next_pc (pc);
target_insert_breakpoint (next_pc, break_mem);
pc = ((fromleaf)
? DEPRECATED_SAVED_PC_AFTER_CALL (get_next_frame (prev))
: get_next_frame (prev)
- ? DEPRECATED_FRAME_SAVED_PC (get_next_frame (prev))
- : read_pc ());
+ ? DEPRECATED_FRAME_SAVED_PC (get_next_frame (prev)) : read_pc ());
tmp = SKIP_TRAMPOLINE_CODE (pc);
return tmp ? tmp : pc;
}
mips_frame_saved_pc (struct frame_info *frame)
{
CORE_ADDR saved_pc;
- mips_extra_func_info_t proc_desc = get_frame_extra_info (frame)->proc_desc;
- /* We have to get the saved pc from the sigcontext
- if it is a signal handler frame. */
- int pcreg = (get_frame_type (frame) == SIGTRAMP_FRAME) ? PC_REGNUM
- : (proc_desc ? PROC_PC_REG (proc_desc) : RA_REGNUM);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
if (DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (frame), 0, 0))
{
- LONGEST tmp;
- frame_unwind_signed_register (frame, PC_REGNUM, &tmp);
- saved_pc = tmp;
+ /* Always unwind the cooked PC register value. */
+ saved_pc = frame_unwind_register_signed (frame, NUM_REGS + mips_regnum (current_gdbarch)->pc);
}
- else if (proc_desc && PROC_DESC_IS_DUMMY (proc_desc))
- saved_pc = read_memory_integer (get_frame_base (frame) - MIPS_SAVED_REGSIZE, MIPS_SAVED_REGSIZE);
else
- saved_pc = read_next_frame_reg (frame, pcreg);
-
+ {
+ mips_extra_func_info_t proc_desc
+ = get_frame_extra_info (frame)->proc_desc;
+ if (proc_desc && PROC_DESC_IS_DUMMY (proc_desc))
+ saved_pc = read_memory_integer ((get_frame_base (frame)
+ - mips_saved_regsize (tdep)),
+ mips_saved_regsize (tdep));
+ else
+ {
+ /* We have to get the saved pc from the sigcontext if it is
+ a signal handler frame. */
+ int pcreg = (get_frame_type (frame) == SIGTRAMP_FRAME
+ ? mips_regnum (current_gdbarch)->pc
+ : proc_desc ? PROC_PC_REG (proc_desc) : RA_REGNUM);
+ saved_pc = read_next_frame_reg (frame, NUM_REGS + pcreg);
+ }
+ }
return ADDR_BITS_REMOVE (saved_pc);
}
frames. */
static CORE_ADDR *temp_saved_regs;
-/* Set a register's saved stack address in temp_saved_regs. If an address
- has already been set for this register, do nothing; this way we will
- only recognize the first save of a given register in a function prologue.
- This is a helper function for mips{16,32}_heuristic_proc_desc. */
+/* Set a register's saved stack address in temp_saved_regs. If an
+ address has already been set for this register, do nothing; this
+ way we will only recognize the first save of a given register in a
+ function prologue.
+
+ For simplicity, save the address in both [0 .. NUM_REGS) and
+ [NUM_REGS .. 2*NUM_REGS). Strictly speaking, only the second range
+ is used as it is only second range (the ABI instead of ISA
+ registers) that comes into play when finding saved registers in a
+ frame. */
static void
-set_reg_offset (int regno, CORE_ADDR offset)
+set_reg_offset (CORE_ADDR *saved_regs, int regno, CORE_ADDR offset)
{
- if (temp_saved_regs[regno] == 0)
- temp_saved_regs[regno] = offset;
+ if (saved_regs[regno] == 0)
+ {
+ saved_regs[regno + 0 * NUM_REGS] = offset;
+ saved_regs[regno + 1 * NUM_REGS] = offset;
+ }
}
if (start_pc == 0)
return 0;
- if (heuristic_fence_post == UINT_MAX
- || fence < VM_MIN_ADDRESS)
+ if (heuristic_fence_post == UINT_MAX || fence < VM_MIN_ADDRESS)
fence = VM_MIN_ADDRESS;
instlen = pc_is_mips16 (pc) ? MIPS16_INSTLEN : MIPS_INSTLEN;
{
static int blurb_printed = 0;
- warning ("Warning: GDB can't find the start of the function at 0x%s.",
- paddr_nz (pc));
+ warning
+ ("Warning: GDB can't find the start of the function at 0x%s.",
+ paddr_nz (pc));
if (!blurb_printed)
{
However, if you think GDB should simply search farther back\n\
from 0x%s for code which looks like the beginning of a\n\
function, you can increase the range of the search using the `set\n\
-heuristic-fence-post' command.\n",
- paddr_nz (pc), paddr_nz (pc));
+heuristic-fence-post' command.\n", paddr_nz (pc), paddr_nz (pc));
blurb_printed = 1;
}
}
static int
mips16_get_imm (unsigned short prev_inst, /* previous instruction */
unsigned short inst, /* current instruction */
- int nbits, /* number of bits in imm field */
- int scale, /* scale factor to be applied to imm */
- int is_signed) /* is the imm field signed? */
+ int nbits, /* number of bits in imm field */
+ int scale, /* scale factor to be applied to imm */
+ int is_signed) /* is the imm field signed? */
{
int offset;
unsigned inst = 0; /* current instruction */
unsigned entry_inst = 0; /* the entry instruction */
int reg, offset;
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
PROC_FRAME_OFFSET (&temp_proc_desc) = 0; /* size of stack frame */
PROC_FRAME_ADJUST (&temp_proc_desc) = 0; /* offset of FP from SP */
/* Fetch and decode the instruction. */
inst = (unsigned short) mips_fetch_instruction (cur_pc);
if ((inst & 0xff00) == 0x6300 /* addiu sp */
- || (inst & 0xff00) == 0xfb00) /* daddiu sp */
+ || (inst & 0xff00) == 0xfb00) /* daddiu sp */
{
offset = mips16_get_imm (prev_inst, inst, 8, 8, 1);
if (offset < 0) /* negative stack adjustment? */
offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
reg = mips16_to_32_reg[(inst & 0x700) >> 8];
PROC_REG_MASK (&temp_proc_desc) |= (1 << reg);
- set_reg_offset (reg, sp + offset);
+ set_reg_offset (temp_saved_regs, reg, sp + offset);
}
else if ((inst & 0xff00) == 0xf900) /* sd reg,n($sp) */
{
offset = mips16_get_imm (prev_inst, inst, 5, 8, 0);
reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
PROC_REG_MASK (&temp_proc_desc) |= (1 << reg);
- set_reg_offset (reg, sp + offset);
+ set_reg_offset (temp_saved_regs, reg, sp + offset);
}
else if ((inst & 0xff00) == 0x6200) /* sw $ra,n($sp) */
{
offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
PROC_REG_MASK (&temp_proc_desc) |= (1 << RA_REGNUM);
- set_reg_offset (RA_REGNUM, sp + offset);
+ set_reg_offset (temp_saved_regs, RA_REGNUM, sp + offset);
}
else if ((inst & 0xff00) == 0xfa00) /* sd $ra,n($sp) */
{
offset = mips16_get_imm (prev_inst, inst, 8, 8, 0);
PROC_REG_MASK (&temp_proc_desc) |= (1 << RA_REGNUM);
- set_reg_offset (RA_REGNUM, sp + offset);
+ set_reg_offset (temp_saved_regs, RA_REGNUM, sp + offset);
}
else if (inst == 0x673d) /* move $s1, $sp */
{
offset = mips16_get_imm (prev_inst, inst, 5, 4, 0);
reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (reg, frame_addr + offset);
+ set_reg_offset (temp_saved_regs, reg, frame_addr + offset);
}
else if ((inst & 0xFF00) == 0x7900) /* sd reg,offset($s1) */
{
offset = mips16_get_imm (prev_inst, inst, 5, 8, 0);
reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (reg, frame_addr + offset);
+ set_reg_offset (temp_saved_regs, reg, frame_addr + offset);
}
else if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
entry_inst = inst; /* save for later processing */
for (reg = 4, offset = 0; reg < areg_count + 4; reg++)
{
PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (reg, sp + offset);
- offset += MIPS_SAVED_REGSIZE;
+ set_reg_offset (temp_saved_regs, reg, sp + offset);
+ offset += mips_saved_regsize (tdep);
}
/* Check if the ra register was pushed on the stack. */
if (entry_inst & 0x20)
{
PROC_REG_MASK (&temp_proc_desc) |= 1 << RA_REGNUM;
- set_reg_offset (RA_REGNUM, sp + offset);
- offset -= MIPS_SAVED_REGSIZE;
+ set_reg_offset (temp_saved_regs, RA_REGNUM, sp + offset);
+ offset -= mips_saved_regsize (tdep);
}
/* Check if the s0 and s1 registers were pushed on the stack. */
for (reg = 16; reg < sreg_count + 16; reg++)
{
PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (reg, sp + offset);
- offset -= MIPS_SAVED_REGSIZE;
+ set_reg_offset (temp_saved_regs, reg, sp + offset);
+ offset -= mips_saved_regsize (tdep);
}
}
}
else if ((high_word & 0xFFE0) == 0xafa0) /* sw reg,offset($sp) */
{
PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (reg, sp + low_word);
+ set_reg_offset (temp_saved_regs, reg, sp + low_word);
}
else if ((high_word & 0xFFE0) == 0xffa0) /* sd reg,offset($sp) */
{
but the register size used is only 32 bits. Make the address
for the saved register point to the lower 32 bits. */
PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (reg, sp + low_word + 8 - MIPS_REGSIZE);
+ set_reg_offset (temp_saved_regs, reg,
+ sp + low_word + 8 - mips_regsize (current_gdbarch));
}
else if (high_word == 0x27be) /* addiu $30,$sp,size */
{
{
unsigned alloca_adjust;
PROC_FRAME_REG (&temp_proc_desc) = 30;
- frame_addr = read_next_frame_reg (next_frame, 30);
+ frame_addr = read_next_frame_reg (next_frame, NUM_REGS + 30);
alloca_adjust = (unsigned) (frame_addr - (sp + low_word));
if (alloca_adjust > 0)
{
{
unsigned alloca_adjust;
PROC_FRAME_REG (&temp_proc_desc) = 30;
- frame_addr = read_next_frame_reg (next_frame, 30);
+ frame_addr = read_next_frame_reg (next_frame, NUM_REGS + 30);
alloca_adjust = (unsigned) (frame_addr - sp);
if (alloca_adjust > 0)
{
else if ((high_word & 0xFFE0) == 0xafc0) /* sw reg,offset($30) */
{
PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (reg, frame_addr + low_word);
+ set_reg_offset (temp_saved_regs, reg, frame_addr + low_word);
}
}
}
CORE_ADDR sp;
if (cur_frame)
- sp = read_next_frame_reg (next_frame, SP_REGNUM);
+ sp = read_next_frame_reg (next_frame, NUM_REGS + SP_REGNUM);
else
sp = 0;
priv = (struct mips_objfile_private *) sec->objfile->obj_private;
/* Search the ".pdr" section generated by GAS. This includes most of
- the information normally found in ECOFF PDRs. */
+ the information normally found in ECOFF PDRs. */
the_bfd = sec->objfile->obfd;
if (priv == NULL
This means that we should not bother with this method on 64-bit
targets (until that is fixed). */
- priv = obstack_alloc (& sec->objfile->psymbol_obstack,
+ priv = obstack_alloc (&sec->objfile->psymbol_obstack,
sizeof (struct mips_objfile_private));
priv->size = 0;
sec->objfile->obj_private = priv;
{
asection *bfdsec;
- priv = obstack_alloc (& sec->objfile->psymbol_obstack,
+ priv = obstack_alloc (&sec->objfile->psymbol_obstack,
sizeof (struct mips_objfile_private));
bfdsec = bfd_get_section_by_name (sec->objfile->obfd, ".pdr");
if (bfdsec != NULL)
{
priv->size = bfd_section_size (sec->objfile->obfd, bfdsec);
- priv->contents = obstack_alloc (& sec->objfile->psymbol_obstack,
+ priv->contents = obstack_alloc (&sec->objfile->psymbol_obstack,
priv->size);
bfd_get_section_contents (sec->objfile->obfd, bfdsec,
priv->contents, 0, priv->size);
/* In general, the .pdr section is sorted. However, in the
- presence of multiple code sections (and other corner cases)
- it can become unsorted. Sort it so that we can use a faster
- binary search. */
- qsort (priv->contents, priv->size / 32, 32, compare_pdr_entries);
+ presence of multiple code sections (and other corner cases)
+ it can become unsorted. Sort it so that we can use a faster
+ binary search. */
+ qsort (priv->contents, priv->size / 32, 32,
+ compare_pdr_entries);
}
else
priv->size = 0;
if (startaddr > BLOCK_START (b))
{
/* This is the "pathological" case referred to in a comment in
- print_frame_info. It might be better to move this check into
- symbol reading. */
+ print_frame_info. It might be better to move this check into
+ symbol reading. */
return NULL;
}
- sym = lookup_symbol (MIPS_EFI_SYMBOL_NAME, b, LABEL_NAMESPACE, 0, NULL);
+ sym = lookup_symbol (MIPS_EFI_SYMBOL_NAME, b, LABEL_DOMAIN, 0, NULL);
/* If we never found a PDR for this function in symbol reading, then
examine prologues to find the information. */
if (proc_symbol)
{
val = find_pc_line (BLOCK_START
- (SYMBOL_BLOCK_VALUE (proc_symbol)),
- 0);
+ (SYMBOL_BLOCK_VALUE (proc_symbol)), 0);
val.pc = val.end ? val.end : pc;
}
if (!proc_symbol || pc < val.pc)
to have their own proc_descs, and even if they don't,
heuristic_proc_desc knows how to create them! */
- register struct linked_proc_info *link;
+ struct linked_proc_info *link;
for (link = linked_proc_desc_table; link; link = link->next)
if (PROC_LOW_ADDR (&link->info) <= pc
if (startaddr == 0)
startaddr = heuristic_proc_start (pc);
- proc_desc =
- heuristic_proc_desc (startaddr, pc, next_frame, cur_frame);
+ proc_desc = heuristic_proc_desc (startaddr, pc, next_frame, cur_frame);
}
return proc_desc;
}
static CORE_ADDR
-get_frame_pointer (struct frame_info *frame,
- mips_extra_func_info_t proc_desc)
+get_frame_pointer (struct frame_info *frame, mips_extra_func_info_t proc_desc)
{
- return (read_next_frame_reg (frame, PROC_FRAME_REG (proc_desc))
- + PROC_FRAME_OFFSET (proc_desc)
- - PROC_FRAME_ADJUST (proc_desc));
+ return (read_next_frame_reg (frame, NUM_REGS + PROC_FRAME_REG (proc_desc))
+ + PROC_FRAME_OFFSET (proc_desc) - PROC_FRAME_ADJUST (proc_desc));
}
static mips_extra_func_info_t cached_proc_desc;
CORE_ADDR tmp;
CORE_ADDR saved_pc = DEPRECATED_FRAME_SAVED_PC (frame);
- if (saved_pc == 0 || inside_entry_file (saved_pc))
- return 0;
-
/* Check if the PC is inside a call stub. If it is, fetch the
PC of the caller of that stub. */
if ((tmp = SKIP_TRAMPOLINE_CODE (saved_pc)) != 0)
if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
&& PROC_FRAME_OFFSET (proc_desc) == 0
/* The previous frame from a sigtramp frame might be frameless
- and have frame size zero. */
+ and have frame size zero. */
&& !(get_frame_type (frame) == SIGTRAMP_FRAME)
/* For a generic dummy frame, let get_frame_pointer() unwind a
register value saved as part of the dummy frame call. */
get_next_frame (fci)
? cached_proc_desc
: find_proc_desc (get_frame_pc (fci),
- NULL /* i.e, get_next_frame (fci) */,
+ NULL /* i.e, get_next_frame (fci) */ ,
1);
frame_extra_info_zalloc (fci, sizeof (struct frame_extra_info));
- deprecated_set_frame_saved_regs_hack (fci, NULL);
get_frame_extra_info (fci)->proc_desc =
proc_desc == &temp_proc_desc ? 0 : proc_desc;
if (proc_desc)
interrupted by a signal at it's very start. */
if (get_frame_pc (fci) == PROC_LOW_ADDR (proc_desc)
&& !PROC_DESC_IS_DUMMY (proc_desc))
- deprecated_update_frame_base_hack (fci, read_next_frame_reg (get_next_frame (fci), SP_REGNUM));
+ deprecated_update_frame_base_hack (fci,
+ read_next_frame_reg (get_next_frame
+ (fci),
+ NUM_REGS +
+ SP_REGNUM));
else if (DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (fci), 0, 0))
/* Do not ``fix'' fci->frame. It will have the value of the
- generic dummy frame's top-of-stack (since the draft
- fci->frame is obtained by returning the unwound stack
- pointer) and that is what we want. That way the fci->frame
- value will match the top-of-stack value that was saved as
- part of the dummy frames data. */
- /* Do nothing. */;
+ generic dummy frame's top-of-stack (since the draft
+ fci->frame is obtained by returning the unwound stack
+ pointer) and that is what we want. That way the fci->frame
+ value will match the top-of-stack value that was saved as
+ part of the dummy frames data. */
+ /* Do nothing. */ ;
else
- deprecated_update_frame_base_hack (fci, get_frame_pointer (get_next_frame (fci), proc_desc));
+ deprecated_update_frame_base_hack (fci,
+ get_frame_pointer (get_next_frame
+ (fci),
+ proc_desc));
if (proc_desc == &temp_proc_desc)
{
use (get_frame_type (fci) == SIGTRAMP_FRAME), it is not
yet set. */
/* FIXME: cagney/2002-11-18: This problem will go away once
- frame.c:get_prev_frame() is modified to set the frame's
- type before calling functions like this. */
+ frame.c:get_prev_frame() is modified to set the frame's
+ type before calling functions like this. */
find_pc_partial_function (get_frame_pc (fci), &name,
(CORE_ADDR *) NULL, (CORE_ADDR *) NULL);
if (!PC_IN_SIGTRAMP (get_frame_pc (fci), name))
{
frame_saved_regs_zalloc (fci);
- memcpy (get_frame_saved_regs (fci), temp_saved_regs, SIZEOF_FRAME_SAVED_REGS);
- get_frame_saved_regs (fci)[PC_REGNUM]
- = get_frame_saved_regs (fci)[RA_REGNUM];
- /* Set value of previous frame's stack pointer. Remember that
- saved_regs[SP_REGNUM] is special in that it contains the
- value of the stack pointer register. The other saved_regs
- values are addresses (in the inferior) at which a given
- register's value may be found. */
- get_frame_saved_regs (fci)[SP_REGNUM] = get_frame_base (fci);
+ /* Set value of previous frame's stack pointer.
+ Remember that saved_regs[SP_REGNUM] is special in
+ that it contains the value of the stack pointer
+ register. The other saved_regs values are addresses
+ (in the inferior) at which a given register's value
+ may be found. */
+ set_reg_offset (temp_saved_regs, SP_REGNUM,
+ get_frame_base (fci));
+ set_reg_offset (temp_saved_regs, mips_regnum (current_gdbarch)->pc,
+ temp_saved_regs[RA_REGNUM]);
+ memcpy (deprecated_get_frame_saved_regs (fci), temp_saved_regs,
+ SIZEOF_FRAME_SAVED_REGS);
}
}
{
return ((typecode == TYPE_CODE_FLT
|| (MIPS_EABI
- && (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION)
+ && (typecode == TYPE_CODE_STRUCT
+ || typecode == TYPE_CODE_UNION)
&& TYPE_NFIELDS (arg_type) == 1
&& TYPE_CODE (TYPE_FIELD_TYPE (arg_type, 0)) == TYPE_CODE_FLT))
&& MIPS_FPU_TYPE != MIPS_FPU_NONE);
return 0;
}
-/* Macros to round N up or down to the next A boundary;
- A must be a power of two. */
-
-#define ROUND_DOWN(n,a) ((n) & ~((a)-1))
-#define ROUND_UP(n,a) (((n)+(a)-1) & ~((a)-1))
-
/* Adjust the address downward (direction of stack growth) so that it
is correctly aligned for a new stack frame. */
static CORE_ADDR
mips_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr)
{
- return ROUND_DOWN (addr, 16);
+ return align_down (addr, 16);
+}
+
+/* Determine how a return value is stored within the MIPS register
+ file, given the return type `valtype'. */
+
+struct return_value_word
+{
+ int len;
+ int reg;
+ int reg_offset;
+ int buf_offset;
+};
+
+static void
+return_value_location (struct type *valtype,
+ struct return_value_word *hi,
+ struct return_value_word *lo)
+{
+ int len = TYPE_LENGTH (valtype);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+
+ if (TYPE_CODE (valtype) == TYPE_CODE_FLT
+ && ((MIPS_FPU_TYPE == MIPS_FPU_DOUBLE && (len == 4 || len == 8))
+ || (MIPS_FPU_TYPE == MIPS_FPU_SINGLE && len == 4)))
+ {
+ if (!FP_REGISTER_DOUBLE && len == 8)
+ {
+ /* We need to break a 64bit float in two 32 bit halves and
+ spread them across a floating-point register pair. */
+ lo->buf_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0;
+ hi->buf_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 0 : 4;
+ lo->reg_offset = ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && register_size (current_gdbarch,
+ mips_regnum (current_gdbarch)->
+ fp0) == 8) ? 4 : 0);
+ hi->reg_offset = lo->reg_offset;
+ lo->reg = mips_regnum (current_gdbarch)->fp0 + 0;
+ hi->reg = mips_regnum (current_gdbarch)->fp0 + 1;
+ lo->len = 4;
+ hi->len = 4;
+ }
+ else
+ {
+ /* The floating point value fits in a single floating-point
+ register. */
+ lo->reg_offset = ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && register_size (current_gdbarch,
+ mips_regnum (current_gdbarch)->
+ fp0) == 8
+ && len == 4) ? 4 : 0);
+ lo->reg = mips_regnum (current_gdbarch)->fp0;
+ lo->len = len;
+ lo->buf_offset = 0;
+ hi->len = 0;
+ hi->reg_offset = 0;
+ hi->buf_offset = 0;
+ hi->reg = 0;
+ }
+ }
+ else
+ {
+ /* Locate a result possibly spread across two registers. */
+ int regnum = 2;
+ lo->reg = regnum + 0;
+ hi->reg = regnum + 1;
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && len < mips_saved_regsize (tdep))
+ {
+ /* "un-left-justify" the value in the low register */
+ lo->reg_offset = mips_saved_regsize (tdep) - len;
+ lo->len = len;
+ hi->reg_offset = 0;
+ hi->len = 0;
+ }
+ else if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG && len > mips_saved_regsize (tdep) /* odd-size structs */
+ && len < mips_saved_regsize (tdep) * 2
+ && (TYPE_CODE (valtype) == TYPE_CODE_STRUCT ||
+ TYPE_CODE (valtype) == TYPE_CODE_UNION))
+ {
+ /* "un-left-justify" the value spread across two registers. */
+ lo->reg_offset = 2 * mips_saved_regsize (tdep) - len;
+ lo->len = mips_saved_regsize (tdep) - lo->reg_offset;
+ hi->reg_offset = 0;
+ hi->len = len - lo->len;
+ }
+ else
+ {
+ /* Only perform a partial copy of the second register. */
+ lo->reg_offset = 0;
+ hi->reg_offset = 0;
+ if (len > mips_saved_regsize (tdep))
+ {
+ lo->len = mips_saved_regsize (tdep);
+ hi->len = len - mips_saved_regsize (tdep);
+ }
+ else
+ {
+ lo->len = len;
+ hi->len = 0;
+ }
+ }
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && register_size (current_gdbarch, regnum) == 8
+ && mips_saved_regsize (tdep) == 4)
+ {
+ /* Account for the fact that only the least-signficant part
+ of the register is being used */
+ lo->reg_offset += 4;
+ hi->reg_offset += 4;
+ }
+ lo->buf_offset = 0;
+ hi->buf_offset = lo->len;
+ }
+}
+
+/* Should call_function allocate stack space for a struct return? */
+
+static int
+mips_eabi_use_struct_convention (int gcc_p, struct type *type)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ return (TYPE_LENGTH (type) > 2 * mips_saved_regsize (tdep));
+}
+
+/* Should call_function pass struct by reference?
+ For each architecture, structs are passed either by
+ value or by reference, depending on their size. */
+
+static int
+mips_eabi_reg_struct_has_addr (int gcc_p, struct type *type)
+{
+ enum type_code typecode = TYPE_CODE (check_typedef (type));
+ int len = TYPE_LENGTH (check_typedef (type));
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+
+ if (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION)
+ return (len > mips_saved_regsize (tdep));
+
+ return 0;
}
static CORE_ADDR
-mips_eabi_push_arguments (int nargs,
- struct value **args,
- CORE_ADDR sp,
- int struct_return,
- CORE_ADDR struct_addr)
+mips_eabi_push_dummy_call (struct gdbarch *gdbarch, CORE_ADDR func_addr,
+ struct regcache *regcache, CORE_ADDR bp_addr,
+ int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
{
int argreg;
int float_argreg;
int argnum;
int len = 0;
int stack_offset = 0;
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
+ /* For shared libraries, "t9" needs to point at the function
+ address. */
+ regcache_cooked_write_signed (regcache, T9_REGNUM, func_addr);
+
+ /* Set the return address register to point to the entry point of
+ the program, where a breakpoint lies in wait. */
+ regcache_cooked_write_signed (regcache, RA_REGNUM, bp_addr);
/* First ensure that the stack and structure return address (if any)
are properly aligned. The stack has to be at least 64-bit
aligned. For n32 and n64, stack frames need to be 128-bit
aligned, so we round to this widest known alignment. */
- sp = ROUND_DOWN (sp, 16);
- struct_addr = ROUND_DOWN (struct_addr, 16);
+ sp = align_down (sp, 16);
+ struct_addr = align_down (struct_addr, 16);
/* Now make space on the stack for the args. We allocate more
than necessary for EABI, because the first few arguments are
passed in registers, but that's OK. */
for (argnum = 0; argnum < nargs; argnum++)
- len += ROUND_UP (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
- MIPS_STACK_ARGSIZE);
- sp -= ROUND_UP (len, 16);
+ len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ mips_stack_argsize (tdep));
+ sp -= align_up (len, 16);
if (mips_debug)
- fprintf_unfiltered (gdb_stdlog,
- "mips_eabi_push_arguments: sp=0x%s allocated %d\n",
- paddr_nz (sp), ROUND_UP (len, 16));
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_eabi_push_dummy_call: sp=0x%s allocated %ld\n",
+ paddr_nz (sp), (long) align_up (len, 16));
/* Initialize the integer and float register pointers. */
argreg = A0_REGNUM;
- float_argreg = FPA0_REGNUM;
+ float_argreg = mips_fpa0_regnum (current_gdbarch);
/* The struct_return pointer occupies the first parameter-passing reg. */
if (struct_return)
{
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_eabi_push_arguments: struct_return reg=%d 0x%s\n",
+ "mips_eabi_push_dummy_call: struct_return reg=%d 0x%s\n",
argreg, paddr_nz (struct_addr));
write_register (argreg++, struct_addr);
}
for (argnum = 0; argnum < nargs; argnum++)
{
char *val;
- char *valbuf = alloca (MAX_REGISTER_RAW_SIZE);
+ char valbuf[MAX_REGISTER_SIZE];
struct value *arg = args[argnum];
struct type *arg_type = check_typedef (VALUE_TYPE (arg));
int len = TYPE_LENGTH (arg_type);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_eabi_push_arguments: %d len=%d type=%d",
+ "mips_eabi_push_dummy_call: %d len=%d type=%d",
argnum + 1, len, (int) typecode);
/* The EABI passes structures that do not fit in a register by
reference. */
- if (len > MIPS_SAVED_REGSIZE
+ if (len > mips_saved_regsize (tdep)
&& (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION))
{
- store_address (valbuf, MIPS_SAVED_REGSIZE, VALUE_ADDRESS (arg));
+ store_unsigned_integer (valbuf, mips_saved_regsize (tdep),
+ VALUE_ADDRESS (arg));
typecode = TYPE_CODE_PTR;
- len = MIPS_SAVED_REGSIZE;
+ len = mips_saved_regsize (tdep);
val = valbuf;
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " push");
up before the check to see if there are any FP registers
left. Non MIPS_EABI targets also pass the FP in the integer
registers so also round up normal registers. */
- if (!FP_REGISTER_DOUBLE
- && fp_register_arg_p (typecode, arg_type))
+ if (!FP_REGISTER_DOUBLE && fp_register_arg_p (typecode, arg_type))
{
if ((float_argreg & 1))
float_argreg++;
/* This is a floating point value that fits entirely
in a single register. */
/* On 32 bit ABI's the float_argreg is further adjusted
- above to ensure that it is even register aligned. */
+ above to ensure that it is even register aligned. */
LONGEST regval = extract_unsigned_integer (val, len);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
/* Copy the argument to general registers or the stack in
register-sized pieces. Large arguments are split between
registers and stack. */
- /* Note: structs whose size is not a multiple of MIPS_REGSIZE
- are treated specially: Irix cc passes them in registers
- where gcc sometimes puts them on the stack. For maximum
- compatibility, we will put them in both places. */
- int odd_sized_struct = ((len > MIPS_SAVED_REGSIZE) &&
- (len % MIPS_SAVED_REGSIZE != 0));
+ /* Note: structs whose size is not a multiple of
+ mips_regsize() are treated specially: Irix cc passes them
+ in registers where gcc sometimes puts them on the stack.
+ For maximum compatibility, we will put them in both
+ places. */
+ int odd_sized_struct = ((len > mips_saved_regsize (tdep))
+ && (len % mips_saved_regsize (tdep) != 0));
/* Note: Floating-point values that didn't fit into an FP
- register are only written to memory. */
+ register are only written to memory. */
while (len > 0)
{
/* Remember if the argument was written to the stack. */
int stack_used_p = 0;
- int partial_len =
- len < MIPS_SAVED_REGSIZE ? len : MIPS_SAVED_REGSIZE;
+ int partial_len = (len < mips_saved_regsize (tdep)
+ ? len : mips_saved_regsize (tdep));
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
stack_used_p = 1;
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
- if (MIPS_STACK_ARGSIZE == 8 &&
- (typecode == TYPE_CODE_INT ||
- typecode == TYPE_CODE_PTR ||
- typecode == TYPE_CODE_FLT) && len <= 4)
- longword_offset = MIPS_STACK_ARGSIZE - len;
- else if ((typecode == TYPE_CODE_STRUCT ||
- typecode == TYPE_CODE_UNION) &&
- TYPE_LENGTH (arg_type) < MIPS_STACK_ARGSIZE)
- longword_offset = MIPS_STACK_ARGSIZE - len;
+ if (mips_stack_argsize (tdep) == 8
+ && (typecode == TYPE_CODE_INT
+ || typecode == TYPE_CODE_PTR
+ || typecode == TYPE_CODE_FLT) && len <= 4)
+ longword_offset = mips_stack_argsize (tdep) - len;
+ else if ((typecode == TYPE_CODE_STRUCT
+ || typecode == TYPE_CODE_UNION)
+ && (TYPE_LENGTH (arg_type)
+ < mips_stack_argsize (tdep)))
+ longword_offset = mips_stack_argsize (tdep) - len;
}
if (mips_debug)
if (mips_debug)
{
int i;
- fprintf_unfiltered (gdb_stdlog, " @0x%s ",
+ fprintf_unfiltered (gdb_stdlog, " @0x%s ",
paddr_nz (addr));
for (i = 0; i < partial_len; i++)
{
- fprintf_unfiltered (gdb_stdlog, "%02x",
+ fprintf_unfiltered (gdb_stdlog, "%02x",
val[i] & 0xff);
}
}
structs may go thru BOTH paths. Floating point
arguments will not. */
/* Write this portion of the argument to a general
- purpose register. */
+ purpose register. */
if (argreg <= MIPS_LAST_ARG_REGNUM
&& !fp_register_arg_p (typecode, arg_type))
{
- LONGEST regval = extract_unsigned_integer (val, partial_len);
+ LONGEST regval =
+ extract_unsigned_integer (val, partial_len);
if (mips_debug)
fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
argreg,
- phex (regval, MIPS_SAVED_REGSIZE));
+ phex (regval,
+ mips_saved_regsize (tdep)));
write_register (argreg, regval);
argreg++;
}
val += partial_len;
/* Compute the the offset into the stack at which we
- will copy the next parameter.
+ will copy the next parameter.
In the new EABI (and the NABI32), the stack_offset
only needs to be adjusted when it has been used. */
if (stack_used_p)
- stack_offset += ROUND_UP (partial_len, MIPS_STACK_ARGSIZE);
+ stack_offset += align_up (partial_len,
+ mips_stack_argsize (tdep));
}
}
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, "\n");
}
+ regcache_cooked_write_signed (regcache, SP_REGNUM, sp);
+
/* Return adjusted stack pointer. */
return sp;
}
-/* N32/N64 version of push_arguments. */
+/* Given a return value in `regbuf' with a type `valtype', extract and
+ copy its value into `valbuf'. */
+
+static void
+mips_eabi_extract_return_value (struct type *valtype,
+ char regbuf[], char *valbuf)
+{
+ struct return_value_word lo;
+ struct return_value_word hi;
+ return_value_location (valtype, &hi, &lo);
+
+ memcpy (valbuf + lo.buf_offset,
+ regbuf + DEPRECATED_REGISTER_BYTE (NUM_REGS + lo.reg) +
+ lo.reg_offset, lo.len);
+
+ if (hi.len > 0)
+ memcpy (valbuf + hi.buf_offset,
+ regbuf + DEPRECATED_REGISTER_BYTE (NUM_REGS + hi.reg) +
+ hi.reg_offset, hi.len);
+}
+
+/* Given a return value in `valbuf' with a type `valtype', write it's
+ value into the appropriate register. */
+
+static void
+mips_eabi_store_return_value (struct type *valtype, char *valbuf)
+{
+ char raw_buffer[MAX_REGISTER_SIZE];
+ struct return_value_word lo;
+ struct return_value_word hi;
+ return_value_location (valtype, &hi, &lo);
+
+ memset (raw_buffer, 0, sizeof (raw_buffer));
+ memcpy (raw_buffer + lo.reg_offset, valbuf + lo.buf_offset, lo.len);
+ deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (lo.reg),
+ raw_buffer, register_size (current_gdbarch,
+ lo.reg));
+
+ if (hi.len > 0)
+ {
+ memset (raw_buffer, 0, sizeof (raw_buffer));
+ memcpy (raw_buffer + hi.reg_offset, valbuf + hi.buf_offset, hi.len);
+ deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (hi.reg),
+ raw_buffer,
+ register_size (current_gdbarch,
+ hi.reg));
+ }
+}
+
+/* N32/N64 ABI stuff. */
static CORE_ADDR
-mips_n32n64_push_arguments (int nargs,
- struct value **args,
- CORE_ADDR sp,
- int struct_return,
- CORE_ADDR struct_addr)
+mips_n32n64_push_dummy_call (struct gdbarch *gdbarch, CORE_ADDR func_addr,
+ struct regcache *regcache, CORE_ADDR bp_addr,
+ int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
{
int argreg;
int float_argreg;
int argnum;
int len = 0;
int stack_offset = 0;
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
+ /* For shared libraries, "t9" needs to point at the function
+ address. */
+ regcache_cooked_write_signed (regcache, T9_REGNUM, func_addr);
+
+ /* Set the return address register to point to the entry point of
+ the program, where a breakpoint lies in wait. */
+ regcache_cooked_write_signed (regcache, RA_REGNUM, bp_addr);
/* First ensure that the stack and structure return address (if any)
are properly aligned. The stack has to be at least 64-bit
aligned. For n32 and n64, stack frames need to be 128-bit
aligned, so we round to this widest known alignment. */
- sp = ROUND_DOWN (sp, 16);
- struct_addr = ROUND_DOWN (struct_addr, 16);
+ sp = align_down (sp, 16);
+ struct_addr = align_down (struct_addr, 16);
/* Now make space on the stack for the args. */
for (argnum = 0; argnum < nargs; argnum++)
- len += ROUND_UP (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
- MIPS_STACK_ARGSIZE);
- sp -= ROUND_UP (len, 16);
+ len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ mips_stack_argsize (tdep));
+ sp -= align_up (len, 16);
if (mips_debug)
- fprintf_unfiltered (gdb_stdlog,
- "mips_n32n64_push_arguments: sp=0x%s allocated %d\n",
- paddr_nz (sp), ROUND_UP (len, 16));
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_n32n64_push_dummy_call: sp=0x%s allocated %ld\n",
+ paddr_nz (sp), (long) align_up (len, 16));
/* Initialize the integer and float register pointers. */
argreg = A0_REGNUM;
- float_argreg = FPA0_REGNUM;
+ float_argreg = mips_fpa0_regnum (current_gdbarch);
/* The struct_return pointer occupies the first parameter-passing reg. */
if (struct_return)
{
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_n32n64_push_arguments: struct_return reg=%d 0x%s\n",
+ "mips_n32n64_push_dummy_call: struct_return reg=%d 0x%s\n",
argreg, paddr_nz (struct_addr));
write_register (argreg++, struct_addr);
}
for (argnum = 0; argnum < nargs; argnum++)
{
char *val;
- char *valbuf = alloca (MAX_REGISTER_RAW_SIZE);
+ char valbuf[MAX_REGISTER_SIZE];
struct value *arg = args[argnum];
struct type *arg_type = check_typedef (VALUE_TYPE (arg));
int len = TYPE_LENGTH (arg_type);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_n32n64_push_arguments: %d len=%d type=%d",
+ "mips_n32n64_push_dummy_call: %d len=%d type=%d",
argnum + 1, len, (int) typecode);
val = (char *) VALUE_CONTENTS (arg);
/* Copy the argument to general registers or the stack in
register-sized pieces. Large arguments are split between
registers and stack. */
- /* Note: structs whose size is not a multiple of MIPS_REGSIZE
- are treated specially: Irix cc passes them in registers
- where gcc sometimes puts them on the stack. For maximum
- compatibility, we will put them in both places. */
- int odd_sized_struct = ((len > MIPS_SAVED_REGSIZE) &&
- (len % MIPS_SAVED_REGSIZE != 0));
+ /* Note: structs whose size is not a multiple of
+ mips_regsize() are treated specially: Irix cc passes them
+ in registers where gcc sometimes puts them on the stack.
+ For maximum compatibility, we will put them in both
+ places. */
+ int odd_sized_struct = ((len > mips_saved_regsize (tdep))
+ && (len % mips_saved_regsize (tdep) != 0));
/* Note: Floating-point values that didn't fit into an FP
- register are only written to memory. */
+ register are only written to memory. */
while (len > 0)
{
/* Rememer if the argument was written to the stack. */
int stack_used_p = 0;
- int partial_len = len < MIPS_SAVED_REGSIZE ?
- len : MIPS_SAVED_REGSIZE;
+ int partial_len = (len < mips_saved_regsize (tdep)
+ ? len : mips_saved_regsize (tdep));
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
stack_used_p = 1;
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
- if (MIPS_STACK_ARGSIZE == 8 &&
- (typecode == TYPE_CODE_INT ||
- typecode == TYPE_CODE_PTR ||
- typecode == TYPE_CODE_FLT) && len <= 4)
- longword_offset = MIPS_STACK_ARGSIZE - len;
+ if (mips_stack_argsize (tdep) == 8
+ && (typecode == TYPE_CODE_INT
+ || typecode == TYPE_CODE_PTR
+ || typecode == TYPE_CODE_FLT) && len <= 4)
+ longword_offset = mips_stack_argsize (tdep) - len;
}
if (mips_debug)
if (mips_debug)
{
int i;
- fprintf_unfiltered (gdb_stdlog, " @0x%s ",
+ fprintf_unfiltered (gdb_stdlog, " @0x%s ",
paddr_nz (addr));
for (i = 0; i < partial_len; i++)
{
- fprintf_unfiltered (gdb_stdlog, "%02x",
+ fprintf_unfiltered (gdb_stdlog, "%02x",
val[i] & 0xff);
}
}
structs may go thru BOTH paths. Floating point
arguments will not. */
/* Write this portion of the argument to a general
- purpose register. */
+ purpose register. */
if (argreg <= MIPS_LAST_ARG_REGNUM
&& !fp_register_arg_p (typecode, arg_type))
{
- LONGEST regval = extract_unsigned_integer (val, partial_len);
+ LONGEST regval =
+ extract_unsigned_integer (val, partial_len);
/* A non-floating-point argument being passed in a
general register. If a struct or union, and if
cagney/2001-07-23: gdb/179: Also, GCC, when
outputting LE O32 with sizeof (struct) <
- MIPS_SAVED_REGSIZE, generates a left shift as
+ mips_saved_regsize(), generates a left shift as
part of storing the argument in a register a
register (the left shift isn't generated when
- sizeof (struct) >= MIPS_SAVED_REGSIZE). Since it
- is quite possible that this is GCC contradicting
- the LE/O32 ABI, GDB has not been adjusted to
- accommodate this. Either someone needs to
- demonstrate that the LE/O32 ABI specifies such a
- left shift OR this new ABI gets identified as
- such and GDB gets tweaked accordingly. */
+ sizeof (struct) >= mips_saved_regsize()). Since
+ it is quite possible that this is GCC
+ contradicting the LE/O32 ABI, GDB has not been
+ adjusted to accommodate this. Either someone
+ needs to demonstrate that the LE/O32 ABI
+ specifies such a left shift OR this new ABI gets
+ identified as such and GDB gets tweaked
+ accordingly. */
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && partial_len < MIPS_SAVED_REGSIZE
+ && partial_len < mips_saved_regsize (tdep)
&& (typecode == TYPE_CODE_STRUCT ||
typecode == TYPE_CODE_UNION))
- regval <<= ((MIPS_SAVED_REGSIZE - partial_len) *
+ regval <<= ((mips_saved_regsize (tdep) - partial_len) *
TARGET_CHAR_BIT);
if (mips_debug)
fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
argreg,
- phex (regval, MIPS_SAVED_REGSIZE));
+ phex (regval,
+ mips_saved_regsize (tdep)));
write_register (argreg, regval);
argreg++;
}
val += partial_len;
/* Compute the the offset into the stack at which we
- will copy the next parameter.
+ will copy the next parameter.
In N32 (N64?), the stack_offset only needs to be
adjusted when it has been used. */
if (stack_used_p)
- stack_offset += ROUND_UP (partial_len, MIPS_STACK_ARGSIZE);
+ stack_offset += align_up (partial_len,
+ mips_stack_argsize (tdep));
}
}
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, "\n");
}
+ regcache_cooked_write_signed (regcache, SP_REGNUM, sp);
+
/* Return adjusted stack pointer. */
return sp;
}
-/* O32 version of push_arguments. */
-
-static CORE_ADDR
-mips_o32_push_arguments (int nargs,
- struct value **args,
- CORE_ADDR sp,
- int struct_return,
- CORE_ADDR struct_addr)
+static enum return_value_convention
+mips_n32n64_return_value (struct gdbarch *gdbarch,
+ struct type *type, struct regcache *regcache,
+ void *readbuf, const void *writebuf)
{
- int argreg;
- int float_argreg;
- int argnum;
- int len = 0;
- int stack_offset = 0;
-
- /* First ensure that the stack and structure return address (if any)
- are properly aligned. The stack has to be at least 64-bit
- aligned even on 32-bit machines, because doubles must be 64-bit
- aligned. For n32 and n64, stack frames need to be 128-bit
- aligned, so we round to this widest known alignment. */
-
- sp = ROUND_DOWN (sp, 16);
- struct_addr = ROUND_DOWN (struct_addr, 16);
-
- /* Now make space on the stack for the args. */
- for (argnum = 0; argnum < nargs; argnum++)
- len += ROUND_UP (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
- MIPS_STACK_ARGSIZE);
- sp -= ROUND_UP (len, 16);
-
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog,
- "mips_o32_push_arguments: sp=0x%s allocated %d\n",
- paddr_nz (sp), ROUND_UP (len, 16));
-
- /* Initialize the integer and float register pointers. */
- argreg = A0_REGNUM;
- float_argreg = FPA0_REGNUM;
-
- /* The struct_return pointer occupies the first parameter-passing reg. */
- if (struct_return)
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (type) == TYPE_CODE_UNION
+ || TYPE_CODE (type) == TYPE_CODE_ARRAY
+ || TYPE_LENGTH (type) > 2 * mips_saved_regsize (tdep))
+ return RETURN_VALUE_STRUCT_CONVENTION;
+ else if (TYPE_CODE (type) == TYPE_CODE_FLT
+ && tdep->mips_fpu_type != MIPS_FPU_NONE)
{
+ /* A floating-point value belongs in the least significant part
+ of FP0. */
if (mips_debug)
- fprintf_unfiltered (gdb_stdlog,
- "mips_o32_push_arguments: struct_return reg=%d 0x%s\n",
- argreg, paddr_nz (struct_addr));
- write_register (argreg++, struct_addr);
- stack_offset += MIPS_STACK_ARGSIZE;
+ fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
+ mips_xfer_register (regcache,
+ NUM_REGS + mips_regnum (current_gdbarch)->fp0,
+ TYPE_LENGTH (type),
+ TARGET_BYTE_ORDER, readbuf, writebuf, 0);
+ return RETURN_VALUE_REGISTER_CONVENTION;
}
-
- /* Now load as many as possible of the first arguments into
- registers, and push the rest onto the stack. Loop thru args
- from first to last. */
- for (argnum = 0; argnum < nargs; argnum++)
+ else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ && TYPE_NFIELDS (type) <= 2
+ && TYPE_NFIELDS (type) >= 1
+ && ((TYPE_NFIELDS (type) == 1
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
+ == TYPE_CODE_FLT))
+ || (TYPE_NFIELDS (type) == 2
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
+ == TYPE_CODE_FLT)
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 1))
+ == TYPE_CODE_FLT)))
+ && tdep->mips_fpu_type != MIPS_FPU_NONE)
{
- char *val;
- char *valbuf = alloca (MAX_REGISTER_RAW_SIZE);
- struct value *arg = args[argnum];
- struct type *arg_type = check_typedef (VALUE_TYPE (arg));
- int len = TYPE_LENGTH (arg_type);
- enum type_code typecode = TYPE_CODE (arg_type);
-
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog,
- "mips_o32_push_arguments: %d len=%d type=%d",
- argnum + 1, len, (int) typecode);
-
- val = (char *) VALUE_CONTENTS (arg);
-
- /* 32-bit ABIs always start floating point arguments in an
- even-numbered floating point register. Round the FP register
- up before the check to see if there are any FP registers
- left. O32/O64 targets also pass the FP in the integer
- registers so also round up normal registers. */
- if (!FP_REGISTER_DOUBLE
- && fp_register_arg_p (typecode, arg_type))
- {
+ /* A struct that contains one or two floats. Each value is part
+ in the least significant part of their floating point
+ register.. */
+ bfd_byte reg[MAX_REGISTER_SIZE];
+ int regnum;
+ int field;
+ for (field = 0, regnum = mips_regnum (current_gdbarch)->fp0;
+ field < TYPE_NFIELDS (type); field++, regnum += 2)
+ {
+ int offset = (FIELD_BITPOS (TYPE_FIELDS (type)[field])
+ / TARGET_CHAR_BIT);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float struct+%d\n",
+ offset);
+ mips_xfer_register (regcache, NUM_REGS + regnum,
+ TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)),
+ TARGET_BYTE_ORDER, readbuf, writebuf, offset);
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+ else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (type) == TYPE_CODE_UNION)
+ {
+ /* A structure or union. Extract the left justified value,
+ regardless of the byte order. I.e. DO NOT USE
+ mips_xfer_lower. */
+ int offset;
+ int regnum;
+ for (offset = 0, regnum = V0_REGNUM;
+ offset < TYPE_LENGTH (type);
+ offset += register_size (current_gdbarch, regnum), regnum++)
+ {
+ int xfer = register_size (current_gdbarch, regnum);
+ if (offset + xfer > TYPE_LENGTH (type))
+ xfer = TYPE_LENGTH (type) - offset;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return struct+%d:%d in $%d\n",
+ offset, xfer, regnum);
+ mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
+ BFD_ENDIAN_UNKNOWN, readbuf, writebuf, offset);
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+ else
+ {
+ /* A scalar extract each part but least-significant-byte
+ justified. */
+ int offset;
+ int regnum;
+ for (offset = 0, regnum = V0_REGNUM;
+ offset < TYPE_LENGTH (type);
+ offset += register_size (current_gdbarch, regnum), regnum++)
+ {
+ int xfer = register_size (current_gdbarch, regnum);
+ int pos = 0;
+ if (offset + xfer > TYPE_LENGTH (type))
+ xfer = TYPE_LENGTH (type) - offset;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return scalar+%d:%d in $%d\n",
+ offset, xfer, regnum);
+ mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
+ TARGET_BYTE_ORDER, readbuf, writebuf, offset);
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+}
+
+/* O32 ABI stuff. */
+
+static CORE_ADDR
+mips_o32_push_dummy_call (struct gdbarch *gdbarch, CORE_ADDR func_addr,
+ struct regcache *regcache, CORE_ADDR bp_addr,
+ int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
+{
+ int argreg;
+ int float_argreg;
+ int argnum;
+ int len = 0;
+ int stack_offset = 0;
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
+ /* For shared libraries, "t9" needs to point at the function
+ address. */
+ regcache_cooked_write_signed (regcache, T9_REGNUM, func_addr);
+
+ /* Set the return address register to point to the entry point of
+ the program, where a breakpoint lies in wait. */
+ regcache_cooked_write_signed (regcache, RA_REGNUM, bp_addr);
+
+ /* First ensure that the stack and structure return address (if any)
+ are properly aligned. The stack has to be at least 64-bit
+ aligned even on 32-bit machines, because doubles must be 64-bit
+ aligned. For n32 and n64, stack frames need to be 128-bit
+ aligned, so we round to this widest known alignment. */
+
+ sp = align_down (sp, 16);
+ struct_addr = align_down (struct_addr, 16);
+
+ /* Now make space on the stack for the args. */
+ for (argnum = 0; argnum < nargs; argnum++)
+ len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ mips_stack_argsize (tdep));
+ sp -= align_up (len, 16);
+
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_o32_push_dummy_call: sp=0x%s allocated %ld\n",
+ paddr_nz (sp), (long) align_up (len, 16));
+
+ /* Initialize the integer and float register pointers. */
+ argreg = A0_REGNUM;
+ float_argreg = mips_fpa0_regnum (current_gdbarch);
+
+ /* The struct_return pointer occupies the first parameter-passing reg. */
+ if (struct_return)
+ {
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_o32_push_dummy_call: struct_return reg=%d 0x%s\n",
+ argreg, paddr_nz (struct_addr));
+ write_register (argreg++, struct_addr);
+ stack_offset += mips_stack_argsize (tdep);
+ }
+
+ /* Now load as many as possible of the first arguments into
+ registers, and push the rest onto the stack. Loop thru args
+ from first to last. */
+ for (argnum = 0; argnum < nargs; argnum++)
+ {
+ char *val;
+ char valbuf[MAX_REGISTER_SIZE];
+ struct value *arg = args[argnum];
+ struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+ int len = TYPE_LENGTH (arg_type);
+ enum type_code typecode = TYPE_CODE (arg_type);
+
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_o32_push_dummy_call: %d len=%d type=%d",
+ argnum + 1, len, (int) typecode);
+
+ val = (char *) VALUE_CONTENTS (arg);
+
+ /* 32-bit ABIs always start floating point arguments in an
+ even-numbered floating point register. Round the FP register
+ up before the check to see if there are any FP registers
+ left. O32/O64 targets also pass the FP in the integer
+ registers so also round up normal registers. */
+ if (!FP_REGISTER_DOUBLE && fp_register_arg_p (typecode, arg_type))
+ {
if ((float_argreg & 1))
float_argreg++;
}
/* This is a floating point value that fits entirely
in a single register. */
/* On 32 bit ABI's the float_argreg is further adjusted
- above to ensure that it is even register aligned. */
+ above to ensure that it is even register aligned. */
LONGEST regval = extract_unsigned_integer (val, len);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
float_argreg, phex (regval, len));
write_register (float_argreg++, regval);
/* CAGNEY: 32 bit MIPS ABI's always reserve two FP
- registers for each argument. The below is (my
- guess) to ensure that the corresponding integer
- register has reserved the same space. */
+ registers for each argument. The below is (my
+ guess) to ensure that the corresponding integer
+ register has reserved the same space. */
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
argreg, phex (regval, len));
argreg += FP_REGISTER_DOUBLE ? 1 : 2;
}
/* Reserve space for the FP register. */
- stack_offset += ROUND_UP (len, MIPS_STACK_ARGSIZE);
+ stack_offset += align_up (len, mips_stack_argsize (tdep));
}
else
{
/* Copy the argument to general registers or the stack in
register-sized pieces. Large arguments are split between
registers and stack. */
- /* Note: structs whose size is not a multiple of MIPS_REGSIZE
- are treated specially: Irix cc passes them in registers
- where gcc sometimes puts them on the stack. For maximum
- compatibility, we will put them in both places. */
- int odd_sized_struct = ((len > MIPS_SAVED_REGSIZE) &&
- (len % MIPS_SAVED_REGSIZE != 0));
+ /* Note: structs whose size is not a multiple of
+ mips_regsize() are treated specially: Irix cc passes them
+ in registers where gcc sometimes puts them on the stack.
+ For maximum compatibility, we will put them in both
+ places. */
+ int odd_sized_struct = ((len > mips_saved_regsize (tdep))
+ && (len % mips_saved_regsize (tdep) != 0));
/* Structures should be aligned to eight bytes (even arg registers)
on MIPS_ABI_O32, if their first member has double precision. */
- if (MIPS_SAVED_REGSIZE < 8
+ if (mips_saved_regsize (tdep) < 8
&& mips_type_needs_double_align (arg_type))
{
if ((argreg & 1))
- argreg++;
+ argreg++;
}
/* Note: Floating-point values that didn't fit into an FP
- register are only written to memory. */
+ register are only written to memory. */
while (len > 0)
{
/* Remember if the argument was written to the stack. */
int stack_used_p = 0;
- int partial_len =
- len < MIPS_SAVED_REGSIZE ? len : MIPS_SAVED_REGSIZE;
+ int partial_len = (len < mips_saved_regsize (tdep)
+ ? len : mips_saved_regsize (tdep));
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
stack_used_p = 1;
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
- if (MIPS_STACK_ARGSIZE == 8 &&
- (typecode == TYPE_CODE_INT ||
- typecode == TYPE_CODE_PTR ||
- typecode == TYPE_CODE_FLT) && len <= 4)
- longword_offset = MIPS_STACK_ARGSIZE - len;
+ if (mips_stack_argsize (tdep) == 8
+ && (typecode == TYPE_CODE_INT
+ || typecode == TYPE_CODE_PTR
+ || typecode == TYPE_CODE_FLT) && len <= 4)
+ longword_offset = mips_stack_argsize (tdep) - len;
}
if (mips_debug)
if (mips_debug)
{
int i;
- fprintf_unfiltered (gdb_stdlog, " @0x%s ",
+ fprintf_unfiltered (gdb_stdlog, " @0x%s ",
paddr_nz (addr));
for (i = 0; i < partial_len; i++)
{
- fprintf_unfiltered (gdb_stdlog, "%02x",
+ fprintf_unfiltered (gdb_stdlog, "%02x",
val[i] & 0xff);
}
}
structs may go thru BOTH paths. Floating point
arguments will not. */
/* Write this portion of the argument to a general
- purpose register. */
+ purpose register. */
if (argreg <= MIPS_LAST_ARG_REGNUM
&& !fp_register_arg_p (typecode, arg_type))
{
LONGEST regval = extract_signed_integer (val, partial_len);
- /* Value may need to be sign extended, because
- MIPS_REGSIZE != MIPS_SAVED_REGSIZE. */
+ /* Value may need to be sign extended, because
+ mips_regsize() != mips_saved_regsize(). */
/* A non-floating-point argument being passed in a
general register. If a struct or union, and if
cagney/2001-07-23: gdb/179: Also, GCC, when
outputting LE O32 with sizeof (struct) <
- MIPS_SAVED_REGSIZE, generates a left shift as
+ mips_saved_regsize(), generates a left shift as
part of storing the argument in a register a
register (the left shift isn't generated when
- sizeof (struct) >= MIPS_SAVED_REGSIZE). Since it
- is quite possible that this is GCC contradicting
- the LE/O32 ABI, GDB has not been adjusted to
- accommodate this. Either someone needs to
- demonstrate that the LE/O32 ABI specifies such a
- left shift OR this new ABI gets identified as
- such and GDB gets tweaked accordingly. */
-
- if (MIPS_SAVED_REGSIZE < 8
+ sizeof (struct) >= mips_saved_regsize()). Since
+ it is quite possible that this is GCC
+ contradicting the LE/O32 ABI, GDB has not been
+ adjusted to accommodate this. Either someone
+ needs to demonstrate that the LE/O32 ABI
+ specifies such a left shift OR this new ABI gets
+ identified as such and GDB gets tweaked
+ accordingly. */
+
+ if (mips_saved_regsize (tdep) < 8
&& TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && partial_len < MIPS_SAVED_REGSIZE
+ && partial_len < mips_saved_regsize (tdep)
&& (typecode == TYPE_CODE_STRUCT ||
typecode == TYPE_CODE_UNION))
- regval <<= ((MIPS_SAVED_REGSIZE - partial_len) *
+ regval <<= ((mips_saved_regsize (tdep) - partial_len) *
TARGET_CHAR_BIT);
if (mips_debug)
fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
argreg,
- phex (regval, MIPS_SAVED_REGSIZE));
+ phex (regval,
+ mips_saved_regsize (tdep)));
write_register (argreg, regval);
argreg++;
val += partial_len;
/* Compute the the offset into the stack at which we
- will copy the next parameter.
+ will copy the next parameter.
- In older ABIs, the caller reserved space for
- registers that contained arguments. This was loosely
- refered to as their "home". Consequently, space is
- always allocated. */
+ In older ABIs, the caller reserved space for
+ registers that contained arguments. This was loosely
+ refered to as their "home". Consequently, space is
+ always allocated. */
- stack_offset += ROUND_UP (partial_len, MIPS_STACK_ARGSIZE);
+ stack_offset += align_up (partial_len,
+ mips_stack_argsize (tdep));
}
}
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, "\n");
}
+ regcache_cooked_write_signed (regcache, SP_REGNUM, sp);
+
/* Return adjusted stack pointer. */
return sp;
}
-/* O64 version of push_arguments. */
+static enum return_value_convention
+mips_o32_return_value (struct gdbarch *gdbarch, struct type *type,
+ struct regcache *regcache,
+ void *readbuf, const void *writebuf)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+
+ if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (type) == TYPE_CODE_UNION
+ || TYPE_CODE (type) == TYPE_CODE_ARRAY)
+ return RETURN_VALUE_STRUCT_CONVENTION;
+ else if (TYPE_CODE (type) == TYPE_CODE_FLT
+ && TYPE_LENGTH (type) == 4 && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ {
+ /* A single-precision floating-point value. It fits in the
+ least significant part of FP0. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
+ mips_xfer_register (regcache,
+ NUM_REGS + mips_regnum (current_gdbarch)->fp0,
+ TYPE_LENGTH (type),
+ TARGET_BYTE_ORDER, readbuf, writebuf, 0);
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+ else if (TYPE_CODE (type) == TYPE_CODE_FLT
+ && TYPE_LENGTH (type) == 8 && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ {
+ /* A double-precision floating-point value. The most
+ significant part goes in FP1, and the least significant in
+ FP0. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float in $fp1/$fp0\n");
+ switch (TARGET_BYTE_ORDER)
+ {
+ case BFD_ENDIAN_LITTLE:
+ mips_xfer_register (regcache,
+ NUM_REGS + mips_regnum (current_gdbarch)->fp0 +
+ 0, 4, TARGET_BYTE_ORDER, readbuf, writebuf, 0);
+ mips_xfer_register (regcache,
+ NUM_REGS + mips_regnum (current_gdbarch)->fp0 +
+ 1, 4, TARGET_BYTE_ORDER, readbuf, writebuf, 4);
+ break;
+ case BFD_ENDIAN_BIG:
+ mips_xfer_register (regcache,
+ NUM_REGS + mips_regnum (current_gdbarch)->fp0 +
+ 1, 4, TARGET_BYTE_ORDER, readbuf, writebuf, 0);
+ mips_xfer_register (regcache,
+ NUM_REGS + mips_regnum (current_gdbarch)->fp0 +
+ 0, 4, TARGET_BYTE_ORDER, readbuf, writebuf, 4);
+ break;
+ default:
+ internal_error (__FILE__, __LINE__, "bad switch");
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+#if 0
+ else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ && TYPE_NFIELDS (type) <= 2
+ && TYPE_NFIELDS (type) >= 1
+ && ((TYPE_NFIELDS (type) == 1
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
+ == TYPE_CODE_FLT))
+ || (TYPE_NFIELDS (type) == 2
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
+ == TYPE_CODE_FLT)
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 1))
+ == TYPE_CODE_FLT)))
+ && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ {
+ /* A struct that contains one or two floats. Each value is part
+ in the least significant part of their floating point
+ register.. */
+ bfd_byte reg[MAX_REGISTER_SIZE];
+ int regnum;
+ int field;
+ for (field = 0, regnum = mips_regnum (current_gdbarch)->fp0;
+ field < TYPE_NFIELDS (type); field++, regnum += 2)
+ {
+ int offset = (FIELD_BITPOS (TYPE_FIELDS (type)[field])
+ / TARGET_CHAR_BIT);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float struct+%d\n",
+ offset);
+ mips_xfer_register (regcache, NUM_REGS + regnum,
+ TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)),
+ TARGET_BYTE_ORDER, readbuf, writebuf, offset);
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+#endif
+#if 0
+ else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (type) == TYPE_CODE_UNION)
+ {
+ /* A structure or union. Extract the left justified value,
+ regardless of the byte order. I.e. DO NOT USE
+ mips_xfer_lower. */
+ int offset;
+ int regnum;
+ for (offset = 0, regnum = V0_REGNUM;
+ offset < TYPE_LENGTH (type);
+ offset += register_size (current_gdbarch, regnum), regnum++)
+ {
+ int xfer = register_size (current_gdbarch, regnum);
+ if (offset + xfer > TYPE_LENGTH (type))
+ xfer = TYPE_LENGTH (type) - offset;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return struct+%d:%d in $%d\n",
+ offset, xfer, regnum);
+ mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
+ BFD_ENDIAN_UNKNOWN, readbuf, writebuf, offset);
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+#endif
+ else
+ {
+ /* A scalar extract each part but least-significant-byte
+ justified. o32 thinks registers are 4 byte, regardless of
+ the ISA. mips_stack_argsize controls this. */
+ int offset;
+ int regnum;
+ for (offset = 0, regnum = V0_REGNUM;
+ offset < TYPE_LENGTH (type);
+ offset += mips_stack_argsize (tdep), regnum++)
+ {
+ int xfer = mips_stack_argsize (tdep);
+ int pos = 0;
+ if (offset + xfer > TYPE_LENGTH (type))
+ xfer = TYPE_LENGTH (type) - offset;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return scalar+%d:%d in $%d\n",
+ offset, xfer, regnum);
+ mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
+ TARGET_BYTE_ORDER, readbuf, writebuf, offset);
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+}
+
+/* O64 ABI. This is a hacked up kind of 64-bit version of the o32
+ ABI. */
static CORE_ADDR
-mips_o64_push_arguments (int nargs,
- struct value **args,
- CORE_ADDR sp,
- int struct_return,
- CORE_ADDR struct_addr)
+mips_o64_push_dummy_call (struct gdbarch *gdbarch, CORE_ADDR func_addr,
+ struct regcache *regcache, CORE_ADDR bp_addr,
+ int nargs,
+ struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
{
int argreg;
int float_argreg;
int argnum;
int len = 0;
int stack_offset = 0;
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
+ /* For shared libraries, "t9" needs to point at the function
+ address. */
+ regcache_cooked_write_signed (regcache, T9_REGNUM, func_addr);
+
+ /* Set the return address register to point to the entry point of
+ the program, where a breakpoint lies in wait. */
+ regcache_cooked_write_signed (regcache, RA_REGNUM, bp_addr);
/* First ensure that the stack and structure return address (if any)
are properly aligned. The stack has to be at least 64-bit
aligned. For n32 and n64, stack frames need to be 128-bit
aligned, so we round to this widest known alignment. */
- sp = ROUND_DOWN (sp, 16);
- struct_addr = ROUND_DOWN (struct_addr, 16);
+ sp = align_down (sp, 16);
+ struct_addr = align_down (struct_addr, 16);
/* Now make space on the stack for the args. */
for (argnum = 0; argnum < nargs; argnum++)
- len += ROUND_UP (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
- MIPS_STACK_ARGSIZE);
- sp -= ROUND_UP (len, 16);
+ len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ mips_stack_argsize (tdep));
+ sp -= align_up (len, 16);
if (mips_debug)
- fprintf_unfiltered (gdb_stdlog,
- "mips_o64_push_arguments: sp=0x%s allocated %d\n",
- paddr_nz (sp), ROUND_UP (len, 16));
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_o64_push_dummy_call: sp=0x%s allocated %ld\n",
+ paddr_nz (sp), (long) align_up (len, 16));
/* Initialize the integer and float register pointers. */
argreg = A0_REGNUM;
- float_argreg = FPA0_REGNUM;
+ float_argreg = mips_fpa0_regnum (current_gdbarch);
/* The struct_return pointer occupies the first parameter-passing reg. */
if (struct_return)
{
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_o64_push_arguments: struct_return reg=%d 0x%s\n",
+ "mips_o64_push_dummy_call: struct_return reg=%d 0x%s\n",
argreg, paddr_nz (struct_addr));
write_register (argreg++, struct_addr);
- stack_offset += MIPS_STACK_ARGSIZE;
+ stack_offset += mips_stack_argsize (tdep);
}
/* Now load as many as possible of the first arguments into
for (argnum = 0; argnum < nargs; argnum++)
{
char *val;
- char *valbuf = alloca (MAX_REGISTER_RAW_SIZE);
+ char valbuf[MAX_REGISTER_SIZE];
struct value *arg = args[argnum];
struct type *arg_type = check_typedef (VALUE_TYPE (arg));
int len = TYPE_LENGTH (arg_type);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_o64_push_arguments: %d len=%d type=%d",
+ "mips_o64_push_dummy_call: %d len=%d type=%d",
argnum + 1, len, (int) typecode);
val = (char *) VALUE_CONTENTS (arg);
up before the check to see if there are any FP registers
left. O32/O64 targets also pass the FP in the integer
registers so also round up normal registers. */
- if (!FP_REGISTER_DOUBLE
- && fp_register_arg_p (typecode, arg_type))
+ if (!FP_REGISTER_DOUBLE && fp_register_arg_p (typecode, arg_type))
{
if ((float_argreg & 1))
float_argreg++;
/* This is a floating point value that fits entirely
in a single register. */
/* On 32 bit ABI's the float_argreg is further adjusted
- above to ensure that it is even register aligned. */
+ above to ensure that it is even register aligned. */
LONGEST regval = extract_unsigned_integer (val, len);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
float_argreg, phex (regval, len));
write_register (float_argreg++, regval);
/* CAGNEY: 32 bit MIPS ABI's always reserve two FP
- registers for each argument. The below is (my
- guess) to ensure that the corresponding integer
- register has reserved the same space. */
+ registers for each argument. The below is (my
+ guess) to ensure that the corresponding integer
+ register has reserved the same space. */
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
argreg, phex (regval, len));
argreg += FP_REGISTER_DOUBLE ? 1 : 2;
}
/* Reserve space for the FP register. */
- stack_offset += ROUND_UP (len, MIPS_STACK_ARGSIZE);
+ stack_offset += align_up (len, mips_stack_argsize (tdep));
}
else
{
/* Copy the argument to general registers or the stack in
register-sized pieces. Large arguments are split between
registers and stack. */
- /* Note: structs whose size is not a multiple of MIPS_REGSIZE
- are treated specially: Irix cc passes them in registers
- where gcc sometimes puts them on the stack. For maximum
- compatibility, we will put them in both places. */
- int odd_sized_struct = ((len > MIPS_SAVED_REGSIZE) &&
- (len % MIPS_SAVED_REGSIZE != 0));
+ /* Note: structs whose size is not a multiple of
+ mips_regsize() are treated specially: Irix cc passes them
+ in registers where gcc sometimes puts them on the stack.
+ For maximum compatibility, we will put them in both
+ places. */
+ int odd_sized_struct = ((len > mips_saved_regsize (tdep))
+ && (len % mips_saved_regsize (tdep) != 0));
/* Structures should be aligned to eight bytes (even arg registers)
on MIPS_ABI_O32, if their first member has double precision. */
- if (MIPS_SAVED_REGSIZE < 8
+ if (mips_saved_regsize (tdep) < 8
&& mips_type_needs_double_align (arg_type))
{
if ((argreg & 1))
- argreg++;
+ argreg++;
}
/* Note: Floating-point values that didn't fit into an FP
- register are only written to memory. */
+ register are only written to memory. */
while (len > 0)
{
/* Remember if the argument was written to the stack. */
int stack_used_p = 0;
- int partial_len =
- len < MIPS_SAVED_REGSIZE ? len : MIPS_SAVED_REGSIZE;
+ int partial_len = (len < mips_saved_regsize (tdep)
+ ? len : mips_saved_regsize (tdep));
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
stack_used_p = 1;
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
- if (MIPS_STACK_ARGSIZE == 8 &&
- (typecode == TYPE_CODE_INT ||
- typecode == TYPE_CODE_PTR ||
- typecode == TYPE_CODE_FLT) && len <= 4)
- longword_offset = MIPS_STACK_ARGSIZE - len;
+ if (mips_stack_argsize (tdep) == 8
+ && (typecode == TYPE_CODE_INT
+ || typecode == TYPE_CODE_PTR
+ || typecode == TYPE_CODE_FLT) && len <= 4)
+ longword_offset = mips_stack_argsize (tdep) - len;
}
if (mips_debug)
if (mips_debug)
{
int i;
- fprintf_unfiltered (gdb_stdlog, " @0x%s ",
+ fprintf_unfiltered (gdb_stdlog, " @0x%s ",
paddr_nz (addr));
for (i = 0; i < partial_len; i++)
{
- fprintf_unfiltered (gdb_stdlog, "%02x",
+ fprintf_unfiltered (gdb_stdlog, "%02x",
val[i] & 0xff);
}
}
structs may go thru BOTH paths. Floating point
arguments will not. */
/* Write this portion of the argument to a general
- purpose register. */
+ purpose register. */
if (argreg <= MIPS_LAST_ARG_REGNUM
&& !fp_register_arg_p (typecode, arg_type))
{
LONGEST regval = extract_signed_integer (val, partial_len);
- /* Value may need to be sign extended, because
- MIPS_REGSIZE != MIPS_SAVED_REGSIZE. */
+ /* Value may need to be sign extended, because
+ mips_regsize() != mips_saved_regsize(). */
/* A non-floating-point argument being passed in a
general register. If a struct or union, and if
cagney/2001-07-23: gdb/179: Also, GCC, when
outputting LE O32 with sizeof (struct) <
- MIPS_SAVED_REGSIZE, generates a left shift as
+ mips_saved_regsize(), generates a left shift as
part of storing the argument in a register a
register (the left shift isn't generated when
- sizeof (struct) >= MIPS_SAVED_REGSIZE). Since it
- is quite possible that this is GCC contradicting
- the LE/O32 ABI, GDB has not been adjusted to
- accommodate this. Either someone needs to
- demonstrate that the LE/O32 ABI specifies such a
- left shift OR this new ABI gets identified as
- such and GDB gets tweaked accordingly. */
-
- if (MIPS_SAVED_REGSIZE < 8
+ sizeof (struct) >= mips_saved_regsize()). Since
+ it is quite possible that this is GCC
+ contradicting the LE/O32 ABI, GDB has not been
+ adjusted to accommodate this. Either someone
+ needs to demonstrate that the LE/O32 ABI
+ specifies such a left shift OR this new ABI gets
+ identified as such and GDB gets tweaked
+ accordingly. */
+
+ if (mips_saved_regsize (tdep) < 8
&& TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && partial_len < MIPS_SAVED_REGSIZE
+ && partial_len < mips_saved_regsize (tdep)
&& (typecode == TYPE_CODE_STRUCT ||
typecode == TYPE_CODE_UNION))
- regval <<= ((MIPS_SAVED_REGSIZE - partial_len) *
+ regval <<= ((mips_saved_regsize (tdep) - partial_len) *
TARGET_CHAR_BIT);
if (mips_debug)
fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
argreg,
- phex (regval, MIPS_SAVED_REGSIZE));
+ phex (regval,
+ mips_saved_regsize (tdep)));
write_register (argreg, regval);
argreg++;
val += partial_len;
/* Compute the the offset into the stack at which we
- will copy the next parameter.
+ will copy the next parameter.
- In older ABIs, the caller reserved space for
- registers that contained arguments. This was loosely
- refered to as their "home". Consequently, space is
- always allocated. */
+ In older ABIs, the caller reserved space for
+ registers that contained arguments. This was loosely
+ refered to as their "home". Consequently, space is
+ always allocated. */
- stack_offset += ROUND_UP (partial_len, MIPS_STACK_ARGSIZE);
+ stack_offset += align_up (partial_len,
+ mips_stack_argsize (tdep));
}
}
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, "\n");
}
+ regcache_cooked_write_signed (regcache, SP_REGNUM, sp);
+
/* Return adjusted stack pointer. */
return sp;
}
-static CORE_ADDR
-mips_push_return_address (CORE_ADDR pc, CORE_ADDR sp)
+static void
+mips_o64_extract_return_value (struct type *valtype,
+ char regbuf[], char *valbuf)
{
- /* Set the return address register to point to the entry
- point of the program, where a breakpoint lies in wait. */
- write_register (RA_REGNUM, CALL_DUMMY_ADDRESS ());
- return sp;
+ struct return_value_word lo;
+ struct return_value_word hi;
+ return_value_location (valtype, &hi, &lo);
+
+ memcpy (valbuf + lo.buf_offset,
+ regbuf + DEPRECATED_REGISTER_BYTE (NUM_REGS + lo.reg) +
+ lo.reg_offset, lo.len);
+
+ if (hi.len > 0)
+ memcpy (valbuf + hi.buf_offset,
+ regbuf + DEPRECATED_REGISTER_BYTE (NUM_REGS + hi.reg) +
+ hi.reg_offset, hi.len);
+}
+
+static void
+mips_o64_store_return_value (struct type *valtype, char *valbuf)
+{
+ char raw_buffer[MAX_REGISTER_SIZE];
+ struct return_value_word lo;
+ struct return_value_word hi;
+ return_value_location (valtype, &hi, &lo);
+
+ memset (raw_buffer, 0, sizeof (raw_buffer));
+ memcpy (raw_buffer + lo.reg_offset, valbuf + lo.buf_offset, lo.len);
+ deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (lo.reg),
+ raw_buffer, register_size (current_gdbarch,
+ lo.reg));
+
+ if (hi.len > 0)
+ {
+ memset (raw_buffer, 0, sizeof (raw_buffer));
+ memcpy (raw_buffer + hi.reg_offset, valbuf + hi.buf_offset, hi.len);
+ deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (hi.reg),
+ raw_buffer,
+ register_size (current_gdbarch,
+ hi.reg));
+ }
}
static void
mips_pop_frame (void)
{
- register int regnum;
+ int regnum;
struct frame_info *frame = get_current_frame ();
CORE_ADDR new_sp = get_frame_base (frame);
mips_extra_func_info_t proc_desc;
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
if (DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (frame), 0, 0))
{
}
proc_desc = get_frame_extra_info (frame)->proc_desc;
- write_register (PC_REGNUM, DEPRECATED_FRAME_SAVED_PC (frame));
- if (get_frame_saved_regs (frame) == NULL)
- DEPRECATED_FRAME_INIT_SAVED_REGS (frame);
+ write_register (mips_regnum (current_gdbarch)->pc,
+ DEPRECATED_FRAME_SAVED_PC (frame));
+ mips_find_saved_regs (frame);
for (regnum = 0; regnum < NUM_REGS; regnum++)
- if (regnum != SP_REGNUM && regnum != PC_REGNUM
- && get_frame_saved_regs (frame)[regnum])
+ if (regnum != SP_REGNUM && regnum != mips_regnum (current_gdbarch)->pc
+ && deprecated_get_frame_saved_regs (frame)[regnum])
{
- /* Floating point registers must not be sign extended,
- in case MIPS_SAVED_REGSIZE = 4 but sizeof (FP0_REGNUM) == 8. */
+ /* Floating point registers must not be sign extended, in case
+ mips_saved_regsize() = 4 but sizeof (FP0_REGNUM) == 8. */
- if (FP0_REGNUM <= regnum && regnum < FP0_REGNUM + 32)
+ if (mips_regnum (current_gdbarch)->fp0 <= regnum
+ && regnum < mips_regnum (current_gdbarch)->fp0 + 32)
write_register (regnum,
- read_memory_unsigned_integer (get_frame_saved_regs (frame)[regnum],
- MIPS_SAVED_REGSIZE));
+ read_memory_unsigned_integer
+ (deprecated_get_frame_saved_regs (frame)[regnum],
+ mips_saved_regsize (tdep)));
else
write_register (regnum,
- read_memory_integer (get_frame_saved_regs (frame)[regnum],
- MIPS_SAVED_REGSIZE));
+ read_memory_integer (deprecated_get_frame_saved_regs
+ (frame)[regnum],
+ mips_saved_regsize (tdep)));
}
write_register (SP_REGNUM, new_sp);
struct linked_proc_info *pi_ptr, *prev_ptr;
for (pi_ptr = linked_proc_desc_table, prev_ptr = NULL;
- pi_ptr != NULL;
- prev_ptr = pi_ptr, pi_ptr = pi_ptr->next)
+ pi_ptr != NULL; prev_ptr = pi_ptr, pi_ptr = pi_ptr->next)
{
if (&pi_ptr->info == proc_desc)
break;
xfree (pi_ptr);
- write_register (HI_REGNUM,
- read_memory_integer (new_sp - 2 * MIPS_SAVED_REGSIZE,
- MIPS_SAVED_REGSIZE));
- write_register (LO_REGNUM,
- read_memory_integer (new_sp - 3 * MIPS_SAVED_REGSIZE,
- MIPS_SAVED_REGSIZE));
+ write_register (mips_regnum (current_gdbarch)->hi,
+ read_memory_integer ((new_sp
+ - 2 * mips_saved_regsize (tdep)),
+ mips_saved_regsize (tdep)));
+ write_register (mips_regnum (current_gdbarch)->lo,
+ read_memory_integer ((new_sp
+ - 3 * mips_saved_regsize (tdep)),
+ mips_saved_regsize (tdep)));
if (MIPS_FPU_TYPE != MIPS_FPU_NONE)
- write_register (FCRCS_REGNUM,
- read_memory_integer (new_sp - 4 * MIPS_SAVED_REGSIZE,
- MIPS_SAVED_REGSIZE));
+ write_register (mips_regnum (current_gdbarch)->fp_control_status,
+ read_memory_integer ((new_sp
+ -
+ 4 * mips_saved_regsize (tdep)),
+ mips_saved_regsize (tdep)));
}
}
-static void
-mips_fix_call_dummy (char *dummy, CORE_ADDR pc, CORE_ADDR fun, int nargs,
- struct value **args, struct type *type, int gcc_p)
-{
- write_register(T9_REGNUM, fun);
-}
-
/* Floating point register management.
Background: MIPS1 & 2 fp registers are 32 bits wide. To support
into rare_buffer. */
static void
-mips_read_fp_register_single (int regno, char *rare_buffer)
+mips_read_fp_register_single (struct frame_info *frame, int regno,
+ char *rare_buffer)
{
- int raw_size = REGISTER_RAW_SIZE (regno);
+ int raw_size = register_size (current_gdbarch, regno);
char *raw_buffer = alloca (raw_size);
- if (!frame_register_read (deprecated_selected_frame, regno, raw_buffer))
+ if (!frame_register_read (frame, regno, raw_buffer))
error ("can't read register %d (%s)", regno, REGISTER_NAME (regno));
if (raw_size == 8)
{
/* We have a 64-bit value for this register. Find the low-order
- 32 bits. */
+ 32 bits. */
int offset;
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
register. */
static void
-mips_read_fp_register_double (int regno, char *rare_buffer)
+mips_read_fp_register_double (struct frame_info *frame, int regno,
+ char *rare_buffer)
{
- int raw_size = REGISTER_RAW_SIZE (regno);
+ int raw_size = register_size (current_gdbarch, regno);
if (raw_size == 8 && !mips2_fp_compat ())
{
/* We have a 64-bit value for this register, and we should use
- all 64 bits. */
- if (!frame_register_read (deprecated_selected_frame, regno, rare_buffer))
+ all 64 bits. */
+ if (!frame_register_read (frame, regno, rare_buffer))
error ("can't read register %d (%s)", regno, REGISTER_NAME (regno));
}
else
{
- if ((regno - FP0_REGNUM) & 1)
+ if ((regno - mips_regnum (current_gdbarch)->fp0) & 1)
internal_error (__FILE__, __LINE__,
"mips_read_fp_register_double: bad access to "
"odd-numbered FP register");
/* mips_read_fp_register_single will find the correct 32 bits from
- each register. */
+ each register. */
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
- mips_read_fp_register_single (regno, rare_buffer + 4);
- mips_read_fp_register_single (regno + 1, rare_buffer);
+ mips_read_fp_register_single (frame, regno, rare_buffer + 4);
+ mips_read_fp_register_single (frame, regno + 1, rare_buffer);
}
else
{
- mips_read_fp_register_single (regno, rare_buffer);
- mips_read_fp_register_single (regno + 1, rare_buffer + 4);
+ mips_read_fp_register_single (frame, regno, rare_buffer);
+ mips_read_fp_register_single (frame, regno + 1, rare_buffer + 4);
}
}
}
static void
-mips_print_fp_register (int regnum)
+mips_print_fp_register (struct ui_file *file, struct frame_info *frame,
+ int regnum)
{ /* do values for FP (float) regs */
char *raw_buffer;
double doub, flt1, flt2; /* doubles extracted from raw hex data */
int inv1, inv2, namelen;
- raw_buffer = (char *) alloca (2 * REGISTER_RAW_SIZE (FP0_REGNUM));
+ raw_buffer =
+ (char *) alloca (2 *
+ register_size (current_gdbarch,
+ mips_regnum (current_gdbarch)->fp0));
- printf_filtered ("%s:", REGISTER_NAME (regnum));
- printf_filtered ("%*s", 4 - (int) strlen (REGISTER_NAME (regnum)), "");
+ fprintf_filtered (file, "%s:", REGISTER_NAME (regnum));
+ fprintf_filtered (file, "%*s", 4 - (int) strlen (REGISTER_NAME (regnum)),
+ "");
- if (REGISTER_RAW_SIZE (regnum) == 4 || mips2_fp_compat ())
+ if (register_size (current_gdbarch, regnum) == 4 || mips2_fp_compat ())
{
/* 4-byte registers: Print hex and floating. Also print even
numbered registers as doubles. */
- mips_read_fp_register_single (regnum, raw_buffer);
+ mips_read_fp_register_single (frame, regnum, raw_buffer);
flt1 = unpack_double (mips_float_register_type (), raw_buffer, &inv1);
print_scalar_formatted (raw_buffer, builtin_type_uint32, 'x', 'w',
- gdb_stdout);
+ file);
- printf_filtered (" flt: ");
+ fprintf_filtered (file, " flt: ");
if (inv1)
- printf_filtered (" <invalid float> ");
+ fprintf_filtered (file, " <invalid float> ");
else
- printf_filtered ("%-17.9g", flt1);
+ fprintf_filtered (file, "%-17.9g", flt1);
if (regnum % 2 == 0)
{
- mips_read_fp_register_double (regnum, raw_buffer);
+ mips_read_fp_register_double (frame, regnum, raw_buffer);
doub = unpack_double (mips_double_register_type (), raw_buffer,
- &inv2);
+ &inv2);
- printf_filtered (" dbl: ");
+ fprintf_filtered (file, " dbl: ");
if (inv2)
- printf_filtered ("<invalid double>");
+ fprintf_filtered (file, "<invalid double>");
else
- printf_filtered ("%-24.17g", doub);
+ fprintf_filtered (file, "%-24.17g", doub);
}
}
else
{
/* Eight byte registers: print each one as hex, float and double. */
- mips_read_fp_register_single (regnum, raw_buffer);
+ mips_read_fp_register_single (frame, regnum, raw_buffer);
flt1 = unpack_double (mips_float_register_type (), raw_buffer, &inv1);
- mips_read_fp_register_double (regnum, raw_buffer);
+ mips_read_fp_register_double (frame, regnum, raw_buffer);
doub = unpack_double (mips_double_register_type (), raw_buffer, &inv2);
print_scalar_formatted (raw_buffer, builtin_type_uint64, 'x', 'g',
- gdb_stdout);
+ file);
- printf_filtered (" flt: ");
+ fprintf_filtered (file, " flt: ");
if (inv1)
- printf_filtered ("<invalid float>");
+ fprintf_filtered (file, "<invalid float>");
else
- printf_filtered ("%-17.9g", flt1);
+ fprintf_filtered (file, "%-17.9g", flt1);
- printf_filtered (" dbl: ");
+ fprintf_filtered (file, " dbl: ");
if (inv2)
- printf_filtered ("<invalid double>");
+ fprintf_filtered (file, "<invalid double>");
else
- printf_filtered ("%-24.17g", doub);
+ fprintf_filtered (file, "%-24.17g", doub);
}
}
static void
-mips_print_register (int regnum, int all)
+mips_print_register (struct ui_file *file, struct frame_info *frame,
+ int regnum, int all)
{
- char *raw_buffer = alloca (MAX_REGISTER_RAW_SIZE);
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+ char raw_buffer[MAX_REGISTER_SIZE];
int offset;
- if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
+ if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) == TYPE_CODE_FLT)
{
- mips_print_fp_register (regnum);
+ mips_print_fp_register (file, frame, regnum);
return;
}
/* Get the data in raw format. */
- if (!frame_register_read (deprecated_selected_frame, regnum, raw_buffer))
+ if (!frame_register_read (frame, regnum, raw_buffer))
{
- printf_filtered ("%s: [Invalid]", REGISTER_NAME (regnum));
+ fprintf_filtered (file, "%s: [Invalid]", REGISTER_NAME (regnum));
return;
}
- fputs_filtered (REGISTER_NAME (regnum), gdb_stdout);
+ fputs_filtered (REGISTER_NAME (regnum), file);
/* The problem with printing numeric register names (r26, etc.) is that
the user can't use them on input. Probably the best solution is to
fix it so that either the numeric or the funky (a2, etc.) names
are accepted on input. */
if (regnum < MIPS_NUMREGS)
- printf_filtered ("(r%d): ", regnum);
+ fprintf_filtered (file, "(r%d): ", regnum);
else
- printf_filtered (": ");
+ fprintf_filtered (file, ": ");
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- offset = REGISTER_RAW_SIZE (regnum) - REGISTER_VIRTUAL_SIZE (regnum);
+ offset =
+ register_size (current_gdbarch,
+ regnum) - register_size (current_gdbarch, regnum);
else
offset = 0;
print_scalar_formatted (raw_buffer + offset,
- REGISTER_VIRTUAL_TYPE (regnum),
- 'x', 0, gdb_stdout);
+ gdbarch_register_type (gdbarch, regnum), 'x', 0,
+ file);
}
/* Replacement for generic do_registers_info.
Print regs in pretty columns. */
static int
-do_fp_register_row (int regnum)
+print_fp_register_row (struct ui_file *file, struct frame_info *frame,
+ int regnum)
{
- printf_filtered (" ");
- mips_print_fp_register (regnum);
- printf_filtered ("\n");
+ fprintf_filtered (file, " ");
+ mips_print_fp_register (file, frame, regnum);
+ fprintf_filtered (file, "\n");
return regnum + 1;
}
/* Print a row's worth of GP (int) registers, with name labels above */
static int
-do_gp_register_row (int regnum)
+print_gp_register_row (struct ui_file *file, struct frame_info *frame,
+ int start_regnum)
{
+ struct gdbarch *gdbarch = get_frame_arch (frame);
/* do values for GP (int) regs */
- char *raw_buffer = alloca (MAX_REGISTER_RAW_SIZE);
- int ncols = (MIPS_REGSIZE == 8 ? 4 : 8); /* display cols per row */
+ char raw_buffer[MAX_REGISTER_SIZE];
+ int ncols = (mips_regsize (gdbarch) == 8 ? 4 : 8); /* display cols per row */
int col, byte;
- int start_regnum = regnum;
- int numregs = NUM_REGS;
-
+ int regnum;
/* For GP registers, we print a separate row of names above the vals */
- printf_filtered (" ");
- for (col = 0; col < ncols && regnum < numregs; regnum++)
+ fprintf_filtered (file, " ");
+ for (col = 0, regnum = start_regnum;
+ col < ncols && regnum < NUM_REGS + NUM_PSEUDO_REGS; regnum++)
{
if (*REGISTER_NAME (regnum) == '\0')
continue; /* unused register */
- if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
+ if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) ==
+ TYPE_CODE_FLT)
break; /* end the row: reached FP register */
- printf_filtered (MIPS_REGSIZE == 8 ? "%17s" : "%9s",
- REGISTER_NAME (regnum));
+ fprintf_filtered (file,
+ mips_regsize (current_gdbarch) == 8 ? "%17s" : "%9s",
+ REGISTER_NAME (regnum));
col++;
}
- printf_filtered (start_regnum < MIPS_NUMREGS ? "\n R%-4d" : "\n ",
- start_regnum); /* print the R0 to R31 names */
+ /* print the R0 to R31 names */
+ if ((start_regnum % NUM_REGS) < MIPS_NUMREGS)
+ fprintf_filtered (file, "\n R%-4d", start_regnum % NUM_REGS);
+ else
+ fprintf_filtered (file, "\n ");
- regnum = start_regnum; /* go back to start of row */
/* now print the values in hex, 4 or 8 to the row */
- for (col = 0; col < ncols && regnum < numregs; regnum++)
+ for (col = 0, regnum = start_regnum;
+ col < ncols && regnum < NUM_REGS + NUM_PSEUDO_REGS; regnum++)
{
if (*REGISTER_NAME (regnum) == '\0')
continue; /* unused register */
- if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
+ if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) ==
+ TYPE_CODE_FLT)
break; /* end row: reached FP register */
/* OK: get the data in raw format. */
- if (!frame_register_read (deprecated_selected_frame, regnum, raw_buffer))
+ if (!frame_register_read (frame, regnum, raw_buffer))
error ("can't read register %d (%s)", regnum, REGISTER_NAME (regnum));
/* pad small registers */
- for (byte = 0; byte < (MIPS_REGSIZE - REGISTER_VIRTUAL_SIZE (regnum)); byte++)
+ for (byte = 0;
+ byte < (mips_regsize (current_gdbarch)
+ - register_size (current_gdbarch, regnum)); byte++)
printf_filtered (" ");
/* Now print the register value in hex, endian order. */
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- for (byte = REGISTER_RAW_SIZE (regnum) - REGISTER_VIRTUAL_SIZE (regnum);
- byte < REGISTER_RAW_SIZE (regnum);
- byte++)
- printf_filtered ("%02x", (unsigned char) raw_buffer[byte]);
+ for (byte =
+ register_size (current_gdbarch,
+ regnum) - register_size (current_gdbarch, regnum);
+ byte < register_size (current_gdbarch, regnum); byte++)
+ fprintf_filtered (file, "%02x", (unsigned char) raw_buffer[byte]);
else
- for (byte = REGISTER_VIRTUAL_SIZE (regnum) - 1;
- byte >= 0;
- byte--)
- printf_filtered ("%02x", (unsigned char) raw_buffer[byte]);
- printf_filtered (" ");
+ for (byte = register_size (current_gdbarch, regnum) - 1;
+ byte >= 0; byte--)
+ fprintf_filtered (file, "%02x", (unsigned char) raw_buffer[byte]);
+ fprintf_filtered (file, " ");
col++;
}
if (col > 0) /* ie. if we actually printed anything... */
- printf_filtered ("\n");
+ fprintf_filtered (file, "\n");
return regnum;
}
/* MIPS_DO_REGISTERS_INFO(): called by "info register" command */
static void
-mips_do_registers_info (int regnum, int fpregs)
+mips_print_registers_info (struct gdbarch *gdbarch, struct ui_file *file,
+ struct frame_info *frame, int regnum, int all)
{
if (regnum != -1) /* do one specified register */
{
+ gdb_assert (regnum >= NUM_REGS);
if (*(REGISTER_NAME (regnum)) == '\0')
error ("Not a valid register for the current processor type");
- mips_print_register (regnum, 0);
- printf_filtered ("\n");
+ mips_print_register (file, frame, regnum, 0);
+ fprintf_filtered (file, "\n");
}
else
/* do all (or most) registers */
{
- regnum = 0;
- while (regnum < NUM_REGS)
+ regnum = NUM_REGS;
+ while (regnum < NUM_REGS + NUM_PSEUDO_REGS)
{
- if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
- if (fpregs) /* true for "INFO ALL-REGISTERS" command */
- regnum = do_fp_register_row (regnum); /* FP regs */
- else
- regnum += MIPS_NUMREGS; /* skip floating point regs */
+ if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) ==
+ TYPE_CODE_FLT)
+ {
+ if (all) /* true for "INFO ALL-REGISTERS" command */
+ regnum = print_fp_register_row (file, frame, regnum);
+ else
+ regnum += MIPS_NUMREGS; /* skip floating point regs */
+ }
else
- regnum = do_gp_register_row (regnum); /* GP (int) regs */
+ regnum = print_gp_register_row (file, frame, regnum);
}
}
}
if (target_read_memory (pc, buf, MIPS_INSTLEN) != 0)
/* If error reading memory, guess that it is not a delayed branch. */
return 0;
- return is_delayed ((unsigned long) extract_unsigned_integer (buf, MIPS_INSTLEN));
+ return is_delayed ((unsigned long)
+ extract_unsigned_integer (buf, MIPS_INSTLEN));
}
-/* Skip the PC past function prologue instructions (32-bit version).
- This is a helper function for mips_skip_prologue. */
+/* Given PC at the function's start address, attempt to find the
+ prologue end using SAL information. Return zero if the skip fails.
+
+ A non-optimized prologue traditionally has one SAL for the function
+ and a second for the function body. A single line function has
+ them both pointing at the same line.
+
+ An optimized prologue is similar but the prologue may contain
+ instructions (SALs) from the instruction body. Need to skip those
+ while not getting into the function body.
+
+ The functions end point and an increasing SAL line are used as
+ indicators of the prologue's endpoint.
+
+ This code is based on the function refine_prologue_limit (versions
+ found in both ia64 and ppc). */
static CORE_ADDR
-mips32_skip_prologue (CORE_ADDR pc)
+skip_prologue_using_sal (CORE_ADDR func_addr)
{
- t_inst inst;
+ struct symtab_and_line prologue_sal;
+ CORE_ADDR start_pc;
CORE_ADDR end_pc;
- int seen_sp_adjust = 0;
- int load_immediate_bytes = 0;
- /* Skip the typical prologue instructions. These are the stack adjustment
- instruction and the instructions that save registers on the stack
- or in the gcc frame. */
- for (end_pc = pc + 100; pc < end_pc; pc += MIPS_INSTLEN)
+ /* Get an initial range for the function. */
+ find_pc_partial_function (func_addr, NULL, &start_pc, &end_pc);
+ start_pc += FUNCTION_START_OFFSET;
+
+ prologue_sal = find_pc_line (start_pc, 0);
+ if (prologue_sal.line != 0)
+ {
+ while (prologue_sal.end < end_pc)
+ {
+ struct symtab_and_line sal;
+
+ sal = find_pc_line (prologue_sal.end, 0);
+ if (sal.line == 0)
+ break;
+ /* Assume that a consecutive SAL for the same (or larger)
+ line mark the prologue -> body transition. */
+ if (sal.line >= prologue_sal.line)
+ break;
+ /* The case in which compiler's optimizer/scheduler has
+ moved instructions into the prologue. We look ahead in
+ the function looking for address ranges whose
+ corresponding line number is less the first one that we
+ found for the function. This is more conservative then
+ refine_prologue_limit which scans a large number of SALs
+ looking for any in the prologue */
+ prologue_sal = sal;
+ }
+ }
+ return prologue_sal.end;
+}
+
+/* Skip the PC past function prologue instructions (32-bit version).
+ This is a helper function for mips_skip_prologue. */
+
+static CORE_ADDR
+mips32_skip_prologue (CORE_ADDR pc)
+{
+ t_inst inst;
+ CORE_ADDR end_pc;
+ int seen_sp_adjust = 0;
+ int load_immediate_bytes = 0;
+
+ /* Find an upper bound on the prologue. */
+ end_pc = skip_prologue_using_sal (pc);
+ if (end_pc == 0)
+ end_pc = pc + 100; /* Magic. */
+
+ /* Skip the typical prologue instructions. These are the stack adjustment
+ instruction and the instructions that save registers on the stack
+ or in the gcc frame. */
+ for (; pc < end_pc; pc += MIPS_INSTLEN)
{
unsigned long high_word;
else if (high_word == 0x3421 || /* ori $at,$at,n */
high_word == 0x3508 || /* ori $t0,$t0,n */
high_word == 0x3401 || /* ori $at,$zero,n */
- high_word == 0x3408) /* ori $t0,$zero,n */
+ high_word == 0x3408) /* ori $t0,$zero,n */
{
load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */
continue;
/* Table of instructions likely to be found in a function prologue. */
static struct
- {
- unsigned short inst;
- unsigned short mask;
- }
+ {
+ unsigned short inst;
+ unsigned short mask;
+ }
table[] =
{
{
- 0x6300, 0xff00
- }
+ 0x6300, 0xff00}
, /* addiu $sp,offset */
{
- 0xfb00, 0xff00
- }
+ 0xfb00, 0xff00}
, /* daddiu $sp,offset */
{
- 0xd000, 0xf800
- }
+ 0xd000, 0xf800}
, /* sw reg,n($sp) */
{
- 0xf900, 0xff00
- }
+ 0xf900, 0xff00}
, /* sd reg,n($sp) */
{
- 0x6200, 0xff00
- }
+ 0x6200, 0xff00}
, /* sw $ra,n($sp) */
{
- 0xfa00, 0xff00
- }
+ 0xfa00, 0xff00}
, /* sd $ra,n($sp) */
{
- 0x673d, 0xffff
- }
+ 0x673d, 0xffff}
, /* move $s1,sp */
{
- 0xd980, 0xff80
- }
+ 0xd980, 0xff80}
, /* sw $a0-$a3,n($s1) */
{
- 0x6704, 0xff1c
- }
+ 0x6704, 0xff1c}
, /* move reg,$a0-$a3 */
{
- 0xe809, 0xf81f
- }
+ 0xe809, 0xf81f}
, /* entry pseudo-op */
{
- 0x0100, 0xff00
- }
+ 0x0100, 0xff00}
, /* addiu $s1,$sp,n */
{
- 0, 0
- } /* end of table marker */
+ 0, 0} /* end of table marker */
};
+ /* Find an upper bound on the prologue. */
+ end_pc = skip_prologue_using_sal (pc);
+ if (end_pc == 0)
+ end_pc = pc + 100; /* Magic. */
+
/* Skip the typical prologue instructions. These are the stack adjustment
instruction and the instructions that save registers on the stack
or in the gcc frame. */
- for (end_pc = pc + 100; pc < end_pc; pc += MIPS16_INSTLEN)
+ for (; pc < end_pc; pc += MIPS16_INSTLEN)
{
unsigned short inst;
int i;
LENIENT, then we must skip everything which is involved in setting
up the frame (it's OK to skip more, just so long as we don't skip
anything which might clobber the registers which are being saved.
- We must skip more in the case where part of the prologue is in the
- delay slot of a non-prologue instruction). */
-
-static CORE_ADDR
-mips_skip_prologue (CORE_ADDR pc)
-{
- /* See if we can determine the end of the prologue via the symbol table.
- If so, then return either PC, or the PC after the prologue, whichever
- is greater. */
-
- CORE_ADDR post_prologue_pc = after_prologue (pc, NULL);
-
- if (post_prologue_pc != 0)
- return max (pc, post_prologue_pc);
-
- /* Can't determine prologue from the symbol table, need to examine
- instructions. */
-
- if (pc_is_mips16 (pc))
- return mips16_skip_prologue (pc);
- else
- return mips32_skip_prologue (pc);
-}
-
-/* Determine how a return value is stored within the MIPS register
- file, given the return type `valtype'. */
-
-struct return_value_word
-{
- int len;
- int reg;
- int reg_offset;
- int buf_offset;
-};
-
-static void
-return_value_location (struct type *valtype,
- struct return_value_word *hi,
- struct return_value_word *lo)
-{
- int len = TYPE_LENGTH (valtype);
-
- if (TYPE_CODE (valtype) == TYPE_CODE_FLT
- && ((MIPS_FPU_TYPE == MIPS_FPU_DOUBLE && (len == 4 || len == 8))
- || (MIPS_FPU_TYPE == MIPS_FPU_SINGLE && len == 4)))
- {
- if (!FP_REGISTER_DOUBLE && len == 8)
- {
- /* We need to break a 64bit float in two 32 bit halves and
- spread them across a floating-point register pair. */
- lo->buf_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0;
- hi->buf_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 0 : 4;
- lo->reg_offset = ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && REGISTER_RAW_SIZE (FP0_REGNUM) == 8)
- ? 4 : 0);
- hi->reg_offset = lo->reg_offset;
- lo->reg = FP0_REGNUM + 0;
- hi->reg = FP0_REGNUM + 1;
- lo->len = 4;
- hi->len = 4;
- }
- else
- {
- /* The floating point value fits in a single floating-point
- register. */
- lo->reg_offset = ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && REGISTER_RAW_SIZE (FP0_REGNUM) == 8
- && len == 4)
- ? 4 : 0);
- lo->reg = FP0_REGNUM;
- lo->len = len;
- lo->buf_offset = 0;
- hi->len = 0;
- hi->reg_offset = 0;
- hi->buf_offset = 0;
- hi->reg = 0;
- }
- }
- else
- {
- /* Locate a result possibly spread across two registers. */
- int regnum = 2;
- lo->reg = regnum + 0;
- hi->reg = regnum + 1;
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && len < MIPS_SAVED_REGSIZE)
- {
- /* "un-left-justify" the value in the low register */
- lo->reg_offset = MIPS_SAVED_REGSIZE - len;
- lo->len = len;
- hi->reg_offset = 0;
- hi->len = 0;
- }
- else if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && len > MIPS_SAVED_REGSIZE /* odd-size structs */
- && len < MIPS_SAVED_REGSIZE * 2
- && (TYPE_CODE (valtype) == TYPE_CODE_STRUCT ||
- TYPE_CODE (valtype) == TYPE_CODE_UNION))
- {
- /* "un-left-justify" the value spread across two registers. */
- lo->reg_offset = 2 * MIPS_SAVED_REGSIZE - len;
- lo->len = MIPS_SAVED_REGSIZE - lo->reg_offset;
- hi->reg_offset = 0;
- hi->len = len - lo->len;
- }
- else
- {
- /* Only perform a partial copy of the second register. */
- lo->reg_offset = 0;
- hi->reg_offset = 0;
- if (len > MIPS_SAVED_REGSIZE)
- {
- lo->len = MIPS_SAVED_REGSIZE;
- hi->len = len - MIPS_SAVED_REGSIZE;
- }
- else
- {
- lo->len = len;
- hi->len = 0;
- }
- }
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && REGISTER_RAW_SIZE (regnum) == 8
- && MIPS_SAVED_REGSIZE == 4)
- {
- /* Account for the fact that only the least-signficant part
- of the register is being used */
- lo->reg_offset += 4;
- hi->reg_offset += 4;
- }
- lo->buf_offset = 0;
- hi->buf_offset = lo->len;
- }
-}
-
-/* Given a return value in `regbuf' with a type `valtype', extract and
- copy its value into `valbuf'. */
-
-static void
-mips_eabi_extract_return_value (struct type *valtype,
- char regbuf[REGISTER_BYTES],
- char *valbuf)
-{
- struct return_value_word lo;
- struct return_value_word hi;
- return_value_location (valtype, &hi, &lo);
-
- memcpy (valbuf + lo.buf_offset,
- regbuf + REGISTER_BYTE (lo.reg) + lo.reg_offset,
- lo.len);
-
- if (hi.len > 0)
- memcpy (valbuf + hi.buf_offset,
- regbuf + REGISTER_BYTE (hi.reg) + hi.reg_offset,
- hi.len);
-}
-
-static void
-mips_o64_extract_return_value (struct type *valtype,
- char regbuf[REGISTER_BYTES],
- char *valbuf)
-{
- struct return_value_word lo;
- struct return_value_word hi;
- return_value_location (valtype, &hi, &lo);
-
- memcpy (valbuf + lo.buf_offset,
- regbuf + REGISTER_BYTE (lo.reg) + lo.reg_offset,
- lo.len);
-
- if (hi.len > 0)
- memcpy (valbuf + hi.buf_offset,
- regbuf + REGISTER_BYTE (hi.reg) + hi.reg_offset,
- hi.len);
-}
-
-/* Given a return value in `valbuf' with a type `valtype', write it's
- value into the appropriate register. */
-
-static void
-mips_eabi_store_return_value (struct type *valtype, char *valbuf)
-{
- char *raw_buffer = alloca (MAX_REGISTER_RAW_SIZE);
- struct return_value_word lo;
- struct return_value_word hi;
- return_value_location (valtype, &hi, &lo);
-
- memset (raw_buffer, 0, sizeof (raw_buffer));
- memcpy (raw_buffer + lo.reg_offset, valbuf + lo.buf_offset, lo.len);
- deprecated_write_register_bytes (REGISTER_BYTE (lo.reg), raw_buffer,
- REGISTER_RAW_SIZE (lo.reg));
-
- if (hi.len > 0)
- {
- memset (raw_buffer, 0, sizeof (raw_buffer));
- memcpy (raw_buffer + hi.reg_offset, valbuf + hi.buf_offset, hi.len);
- deprecated_write_register_bytes (REGISTER_BYTE (hi.reg), raw_buffer,
- REGISTER_RAW_SIZE (hi.reg));
- }
-}
-
-static void
-mips_o64_store_return_value (struct type *valtype, char *valbuf)
-{
- char *raw_buffer = alloca (MAX_REGISTER_RAW_SIZE);
- struct return_value_word lo;
- struct return_value_word hi;
- return_value_location (valtype, &hi, &lo);
-
- memset (raw_buffer, 0, sizeof (raw_buffer));
- memcpy (raw_buffer + lo.reg_offset, valbuf + lo.buf_offset, lo.len);
- deprecated_write_register_bytes (REGISTER_BYTE (lo.reg), raw_buffer,
- REGISTER_RAW_SIZE (lo.reg));
-
- if (hi.len > 0)
- {
- memset (raw_buffer, 0, sizeof (raw_buffer));
- memcpy (raw_buffer + hi.reg_offset, valbuf + hi.buf_offset, hi.len);
- deprecated_write_register_bytes (REGISTER_BYTE (hi.reg), raw_buffer,
- REGISTER_RAW_SIZE (hi.reg));
- }
-}
-
-/* O32 ABI stuff. */
-
-static void
-mips_o32_xfer_return_value (struct type *type,
- struct regcache *regcache,
- bfd_byte *in, const bfd_byte *out)
-{
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
- if (TYPE_CODE (type) == TYPE_CODE_FLT
- && TYPE_LENGTH (type) == 4
- && tdep->mips_fpu_type != MIPS_FPU_NONE)
- {
- /* A single-precision floating-point value. It fits in the
- least significant part of FP0. */
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
- mips_xfer_register (regcache, FP0_REGNUM, TYPE_LENGTH (type),
- TARGET_BYTE_ORDER, in, out, 0);
- }
- else if (TYPE_CODE (type) == TYPE_CODE_FLT
- && TYPE_LENGTH (type) == 8
- && tdep->mips_fpu_type != MIPS_FPU_NONE)
- {
- /* A double-precision floating-point value. It fits in the
- least significant part of FP0/FP1 but with byte ordering
- based on the target (???). */
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return float in $fp0/$fp1\n");
- switch (TARGET_BYTE_ORDER)
- {
- case BFD_ENDIAN_LITTLE:
- mips_xfer_register (regcache, FP0_REGNUM + 0, 4,
- TARGET_BYTE_ORDER, in, out, 0);
- mips_xfer_register (regcache, FP0_REGNUM + 1, 4,
- TARGET_BYTE_ORDER, in, out, 4);
- break;
- case BFD_ENDIAN_BIG:
- mips_xfer_register (regcache, FP0_REGNUM + 1, 4,
- TARGET_BYTE_ORDER, in, out, 0);
- mips_xfer_register (regcache, FP0_REGNUM + 0, 4,
- TARGET_BYTE_ORDER, in, out, 4);
- break;
- default:
- internal_error (__FILE__, __LINE__, "bad switch");
- }
- }
-#if 0
- else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
- && TYPE_NFIELDS (type) <= 2
- && TYPE_NFIELDS (type) >= 1
- && ((TYPE_NFIELDS (type) == 1
- && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
- == TYPE_CODE_FLT))
- || (TYPE_NFIELDS (type) == 2
- && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
- == TYPE_CODE_FLT)
- && (TYPE_CODE (TYPE_FIELD_TYPE (type, 1))
- == TYPE_CODE_FLT)))
- && tdep->mips_fpu_type != MIPS_FPU_NONE)
- {
- /* A struct that contains one or two floats. Each value is part
- in the least significant part of their floating point
- register.. */
- bfd_byte *reg = alloca (MAX_REGISTER_RAW_SIZE);
- int regnum;
- int field;
- for (field = 0, regnum = FP0_REGNUM;
- field < TYPE_NFIELDS (type);
- field++, regnum += 2)
- {
- int offset = (FIELD_BITPOS (TYPE_FIELDS (type)[field])
- / TARGET_CHAR_BIT);
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return float struct+%d\n", offset);
- mips_xfer_register (regcache, regnum, TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)),
- TARGET_BYTE_ORDER, in, out, offset);
- }
- }
-#endif
-#if 0
- else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
- || TYPE_CODE (type) == TYPE_CODE_UNION)
- {
- /* A structure or union. Extract the left justified value,
- regardless of the byte order. I.e. DO NOT USE
- mips_xfer_lower. */
- int offset;
- int regnum;
- for (offset = 0, regnum = V0_REGNUM;
- offset < TYPE_LENGTH (type);
- offset += REGISTER_RAW_SIZE (regnum), regnum++)
- {
- int xfer = REGISTER_RAW_SIZE (regnum);
- if (offset + xfer > TYPE_LENGTH (type))
- xfer = TYPE_LENGTH (type) - offset;
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return struct+%d:%d in $%d\n",
- offset, xfer, regnum);
- mips_xfer_register (regcache, regnum, xfer, BFD_ENDIAN_UNKNOWN,
- in, out, offset);
- }
- }
-#endif
- else
- {
- /* A scalar extract each part but least-significant-byte
- justified. o32 thinks registers are 4 byte, regardless of
- the ISA. mips_stack_argsize controls this. */
- int offset;
- int regnum;
- for (offset = 0, regnum = V0_REGNUM;
- offset < TYPE_LENGTH (type);
- offset += mips_stack_argsize (), regnum++)
- {
- int xfer = mips_stack_argsize ();
- int pos = 0;
- if (offset + xfer > TYPE_LENGTH (type))
- xfer = TYPE_LENGTH (type) - offset;
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return scalar+%d:%d in $%d\n",
- offset, xfer, regnum);
- mips_xfer_register (regcache, regnum, xfer, TARGET_BYTE_ORDER,
- in, out, offset);
- }
- }
-}
-
-static void
-mips_o32_extract_return_value (struct type *type,
- struct regcache *regcache,
- void *valbuf)
-{
- mips_o32_xfer_return_value (type, regcache, valbuf, NULL);
-}
-
-static void
-mips_o32_store_return_value (struct type *type, char *valbuf)
-{
- mips_o32_xfer_return_value (type, current_regcache, NULL, valbuf);
-}
-
-/* N32/N44 ABI stuff. */
-
-static void
-mips_n32n64_xfer_return_value (struct type *type,
- struct regcache *regcache,
- bfd_byte *in, const bfd_byte *out)
-{
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
- if (TYPE_CODE (type) == TYPE_CODE_FLT
- && tdep->mips_fpu_type != MIPS_FPU_NONE)
- {
- /* A floating-point value belongs in the least significant part
- of FP0. */
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
- mips_xfer_register (regcache, FP0_REGNUM, TYPE_LENGTH (type),
- TARGET_BYTE_ORDER, in, out, 0);
- }
- else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
- && TYPE_NFIELDS (type) <= 2
- && TYPE_NFIELDS (type) >= 1
- && ((TYPE_NFIELDS (type) == 1
- && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
- == TYPE_CODE_FLT))
- || (TYPE_NFIELDS (type) == 2
- && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
- == TYPE_CODE_FLT)
- && (TYPE_CODE (TYPE_FIELD_TYPE (type, 1))
- == TYPE_CODE_FLT)))
- && tdep->mips_fpu_type != MIPS_FPU_NONE)
- {
- /* A struct that contains one or two floats. Each value is part
- in the least significant part of their floating point
- register.. */
- bfd_byte *reg = alloca (MAX_REGISTER_RAW_SIZE);
- int regnum;
- int field;
- for (field = 0, regnum = FP0_REGNUM;
- field < TYPE_NFIELDS (type);
- field++, regnum += 2)
- {
- int offset = (FIELD_BITPOS (TYPE_FIELDS (type)[field])
- / TARGET_CHAR_BIT);
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return float struct+%d\n", offset);
- mips_xfer_register (regcache, regnum, TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)),
- TARGET_BYTE_ORDER, in, out, offset);
- }
- }
- else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
- || TYPE_CODE (type) == TYPE_CODE_UNION)
- {
- /* A structure or union. Extract the left justified value,
- regardless of the byte order. I.e. DO NOT USE
- mips_xfer_lower. */
- int offset;
- int regnum;
- for (offset = 0, regnum = V0_REGNUM;
- offset < TYPE_LENGTH (type);
- offset += REGISTER_RAW_SIZE (regnum), regnum++)
- {
- int xfer = REGISTER_RAW_SIZE (regnum);
- if (offset + xfer > TYPE_LENGTH (type))
- xfer = TYPE_LENGTH (type) - offset;
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return struct+%d:%d in $%d\n",
- offset, xfer, regnum);
- mips_xfer_register (regcache, regnum, xfer, BFD_ENDIAN_UNKNOWN,
- in, out, offset);
- }
- }
- else
- {
- /* A scalar extract each part but least-significant-byte
- justified. */
- int offset;
- int regnum;
- for (offset = 0, regnum = V0_REGNUM;
- offset < TYPE_LENGTH (type);
- offset += REGISTER_RAW_SIZE (regnum), regnum++)
- {
- int xfer = REGISTER_RAW_SIZE (regnum);
- int pos = 0;
- if (offset + xfer > TYPE_LENGTH (type))
- xfer = TYPE_LENGTH (type) - offset;
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return scalar+%d:%d in $%d\n",
- offset, xfer, regnum);
- mips_xfer_register (regcache, regnum, xfer, TARGET_BYTE_ORDER,
- in, out, offset);
- }
- }
-}
+ We must skip more in the case where part of the prologue is in the
+ delay slot of a non-prologue instruction). */
-static void
-mips_n32n64_extract_return_value (struct type *type,
- struct regcache *regcache,
- void *valbuf)
+static CORE_ADDR
+mips_skip_prologue (CORE_ADDR pc)
{
- mips_n32n64_xfer_return_value (type, regcache, valbuf, NULL);
-}
+ /* See if we can determine the end of the prologue via the symbol table.
+ If so, then return either PC, or the PC after the prologue, whichever
+ is greater. */
-static void
-mips_n32n64_store_return_value (struct type *type, char *valbuf)
-{
- mips_n32n64_xfer_return_value (type, current_regcache, NULL, valbuf);
-}
+ CORE_ADDR post_prologue_pc = after_prologue (pc, NULL);
-static void
-mips_store_struct_return (CORE_ADDR addr, CORE_ADDR sp)
-{
- /* Nothing to do -- push_arguments does all the work. */
-}
+ if (post_prologue_pc != 0)
+ return max (pc, post_prologue_pc);
-static CORE_ADDR
-mips_extract_struct_value_address (struct regcache *regcache)
-{
- /* FIXME: This will only work at random. The caller passes the
- struct_return address in V0, but it is not preserved. It may
- still be there, or this may be a random value. */
- LONGEST val;
+ /* Can't determine prologue from the symbol table, need to examine
+ instructions. */
- regcache_cooked_read_signed (regcache, V0_REGNUM, &val);
- return val;
+ if (pc_is_mips16 (pc))
+ return mips16_skip_prologue (pc);
+ else
+ return mips32_skip_prologue (pc);
}
/* Exported procedure: Is PC in the signal trampoline code */
static void
set_mips_command (char *args, int from_tty)
{
- printf_unfiltered ("\"set mips\" must be followed by an appropriate subcommand.\n");
+ printf_unfiltered
+ ("\"set mips\" must be followed by an appropriate subcommand.\n");
help_list (setmipscmdlist, "set mips ", all_commands, gdb_stdout);
}
internal_error (__FILE__, __LINE__, "bad switch");
}
if (mips_fpu_type_auto)
- printf_unfiltered ("The MIPS floating-point coprocessor is set automatically (currently %s)\n",
- fpu);
+ printf_unfiltered
+ ("The MIPS floating-point coprocessor is set automatically (currently %s)\n",
+ fpu);
else
- printf_unfiltered ("The MIPS floating-point coprocessor is assumed to be %s\n",
- fpu);
+ printf_unfiltered
+ ("The MIPS floating-point coprocessor is assumed to be %s\n", fpu);
}
static void
set_mipsfpu_command (char *args, int from_tty)
{
- printf_unfiltered ("\"set mipsfpu\" must be followed by \"double\", \"single\",\"none\" or \"auto\".\n");
+ printf_unfiltered
+ ("\"set mipsfpu\" must be followed by \"double\", \"single\",\"none\" or \"auto\".\n");
show_mipsfpu_command (args, from_tty);
}
static void
set_mipsfpu_single_command (char *args, int from_tty)
{
+ struct gdbarch_info info;
+ gdbarch_info_init (&info);
mips_fpu_type = MIPS_FPU_SINGLE;
mips_fpu_type_auto = 0;
- gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_SINGLE;
+ /* FIXME: cagney/2003-11-15: Should be setting a field in "info"
+ instead of relying on globals. Doing that would let generic code
+ handle the search for this specific architecture. */
+ if (!gdbarch_update_p (info))
+ internal_error (__FILE__, __LINE__, "set mipsfpu failed");
}
static void
set_mipsfpu_double_command (char *args, int from_tty)
{
+ struct gdbarch_info info;
+ gdbarch_info_init (&info);
mips_fpu_type = MIPS_FPU_DOUBLE;
mips_fpu_type_auto = 0;
- gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_DOUBLE;
+ /* FIXME: cagney/2003-11-15: Should be setting a field in "info"
+ instead of relying on globals. Doing that would let generic code
+ handle the search for this specific architecture. */
+ if (!gdbarch_update_p (info))
+ internal_error (__FILE__, __LINE__, "set mipsfpu failed");
}
static void
set_mipsfpu_none_command (char *args, int from_tty)
{
+ struct gdbarch_info info;
+ gdbarch_info_init (&info);
mips_fpu_type = MIPS_FPU_NONE;
mips_fpu_type_auto = 0;
- gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_NONE;
+ /* FIXME: cagney/2003-11-15: Should be setting a field in "info"
+ instead of relying on globals. Doing that would let generic code
+ handle the search for this specific architecture. */
+ if (!gdbarch_update_p (info))
+ internal_error (__FILE__, __LINE__, "set mipsfpu failed");
}
static void
mips_fpu_type_auto = 1;
}
-/* Command to set the processor type. */
-
-void
-mips_set_processor_type_command (char *args, int from_tty)
-{
- int i;
-
- if (tmp_mips_processor_type == NULL || *tmp_mips_processor_type == '\0')
- {
- printf_unfiltered ("The known MIPS processor types are as follows:\n\n");
- for (i = 0; mips_processor_type_table[i].name != NULL; ++i)
- printf_unfiltered ("%s\n", mips_processor_type_table[i].name);
-
- /* Restore the value. */
- tmp_mips_processor_type = xstrdup (mips_processor_type);
-
- return;
- }
-
- if (!mips_set_processor_type (tmp_mips_processor_type))
- {
- error ("Unknown processor type `%s'.", tmp_mips_processor_type);
- /* Restore its value. */
- tmp_mips_processor_type = xstrdup (mips_processor_type);
- }
-}
-
-static void
-mips_show_processor_type_command (char *args, int from_tty)
-{
-}
-
-/* Modify the actual processor type. */
-
-static int
-mips_set_processor_type (char *str)
-{
- int i;
-
- if (str == NULL)
- return 0;
-
- for (i = 0; mips_processor_type_table[i].name != NULL; ++i)
- {
- if (strcasecmp (str, mips_processor_type_table[i].name) == 0)
- {
- mips_processor_type = str;
- mips_processor_reg_names = mips_processor_type_table[i].regnames;
- return 1;
- /* FIXME tweak fpu flag too */
- }
- }
-
- return 0;
-}
-
/* Attempt to identify the particular processor model by reading the
- processor id. */
+ processor id. NOTE: cagney/2003-11-15: Firstly it isn't clear that
+ the relevant processor still exists (it dates back to '94) and
+ secondly this is not the way to do this. The processor type should
+ be set by forcing an architecture change. */
-char *
-mips_read_processor_type (void)
+void
+deprecated_mips_set_processor_regs_hack (void)
{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
CORE_ADDR prid;
prid = read_register (PRID_REGNUM);
if ((prid & ~0xf) == 0x700)
- return savestring ("r3041", strlen ("r3041"));
-
- return NULL;
+ tdep->mips_processor_reg_names = mips_r3041_reg_names;
}
/* Just like reinit_frame_cache, but with the right arguments to be
reinit_frame_cache ();
}
-int
-gdb_print_insn_mips (bfd_vma memaddr, disassemble_info *info)
+static int
+gdb_print_insn_mips (bfd_vma memaddr, struct disassemble_info *info)
{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
mips_extra_func_info_t proc_desc;
/* Search for the function containing this address. Set the low bit
the search would fail because the symbol table says the function
starts at an odd address, i.e. 1 byte past the given address. */
memaddr = ADDR_BITS_REMOVE (memaddr);
- proc_desc = non_heuristic_proc_desc (MAKE_MIPS16_ADDR (memaddr), NULL);
+ proc_desc = non_heuristic_proc_desc (make_mips16_addr (memaddr), NULL);
/* Make an attempt to determine if this is a 16-bit function. If
the procedure descriptor exists and the address therein is odd,
it's definitely a 16-bit function. Otherwise, we have to just
guess that if the address passed in is odd, it's 16-bits. */
+ /* FIXME: cagney/2003-06-26: Is this even necessary? The
+ disassembler needs to be able to locally determine the ISA, and
+ not rely on GDB. Otherwize the stand-alone 'objdump -d' will not
+ work. */
if (proc_desc)
- info->mach = pc_is_mips16 (PROC_LOW_ADDR (proc_desc)) ?
- bfd_mach_mips16 : TM_PRINT_INSN_MACH;
+ {
+ if (pc_is_mips16 (PROC_LOW_ADDR (proc_desc)))
+ info->mach = bfd_mach_mips16;
+ }
else
- info->mach = pc_is_mips16 (memaddr) ?
- bfd_mach_mips16 : TM_PRINT_INSN_MACH;
+ {
+ if (pc_is_mips16 (memaddr))
+ info->mach = bfd_mach_mips16;
+ }
/* Round down the instruction address to the appropriate boundary. */
memaddr &= (info->mach == bfd_mach_mips16 ? ~1 : ~3);
+ /* Set the disassembler options. */
+ if (tdep->mips_abi == MIPS_ABI_N32 || tdep->mips_abi == MIPS_ABI_N64)
+ {
+ /* Set up the disassembler info, so that we get the right
+ register names from libopcodes. */
+ if (tdep->mips_abi == MIPS_ABI_N32)
+ info->disassembler_options = "gpr-names=n32";
+ else
+ info->disassembler_options = "gpr-names=64";
+ info->flavour = bfd_target_elf_flavour;
+ }
+ else
+ /* This string is not recognized explicitly by the disassembler,
+ but it tells the disassembler to not try to guess the ABI from
+ the bfd elf headers, such that, if the user overrides the ABI
+ of a program linked as NewABI, the disassembly will follow the
+ register naming conventions specified by the user. */
+ info->disassembler_options = "gpr-names=32";
+
/* Call the appropriate disassembler based on the target endian-ness. */
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
return print_insn_big_mips (memaddr, info);
return print_insn_little_mips (memaddr, info);
}
-/* Old-style breakpoint macros.
- The IDT board uses an unusual breakpoint value, and sometimes gets
- confused when it sees the usual MIPS breakpoint instruction. */
-
-#define BIG_BREAKPOINT {0, 0x5, 0, 0xd}
-#define LITTLE_BREAKPOINT {0xd, 0, 0x5, 0}
-#define PMON_BIG_BREAKPOINT {0, 0, 0, 0xd}
-#define PMON_LITTLE_BREAKPOINT {0xd, 0, 0, 0}
-#define IDT_BIG_BREAKPOINT {0, 0, 0x0a, 0xd}
-#define IDT_LITTLE_BREAKPOINT {0xd, 0x0a, 0, 0}
-#define MIPS16_BIG_BREAKPOINT {0xe8, 0xa5}
-#define MIPS16_LITTLE_BREAKPOINT {0xa5, 0xe8}
-
/* This function implements the BREAKPOINT_FROM_PC macro. It uses the program
counter value to determine whether a 16- or 32-bit breakpoint should be
used. It returns a pointer to a string of bytes that encode a breakpoint
breakpoint should be inserted. */
static const unsigned char *
-mips_breakpoint_from_pc (CORE_ADDR * pcptr, int *lenptr)
+mips_breakpoint_from_pc (CORE_ADDR *pcptr, int *lenptr)
{
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
if (pc_is_mips16 (*pcptr))
{
- static unsigned char mips16_big_breakpoint[] =
- MIPS16_BIG_BREAKPOINT;
- *pcptr = UNMAKE_MIPS16_ADDR (*pcptr);
+ static unsigned char mips16_big_breakpoint[] = { 0xe8, 0xa5 };
+ *pcptr = unmake_mips16_addr (*pcptr);
*lenptr = sizeof (mips16_big_breakpoint);
return mips16_big_breakpoint;
}
else
{
- static unsigned char big_breakpoint[] = BIG_BREAKPOINT;
- static unsigned char pmon_big_breakpoint[] = PMON_BIG_BREAKPOINT;
- static unsigned char idt_big_breakpoint[] = IDT_BIG_BREAKPOINT;
+ /* The IDT board uses an unusual breakpoint value, and
+ sometimes gets confused when it sees the usual MIPS
+ breakpoint instruction. */
+ static unsigned char big_breakpoint[] = { 0, 0x5, 0, 0xd };
+ static unsigned char pmon_big_breakpoint[] = { 0, 0, 0, 0xd };
+ static unsigned char idt_big_breakpoint[] = { 0, 0, 0x0a, 0xd };
*lenptr = sizeof (big_breakpoint);
{
if (pc_is_mips16 (*pcptr))
{
- static unsigned char mips16_little_breakpoint[] =
- MIPS16_LITTLE_BREAKPOINT;
- *pcptr = UNMAKE_MIPS16_ADDR (*pcptr);
+ static unsigned char mips16_little_breakpoint[] = { 0xa5, 0xe8 };
+ *pcptr = unmake_mips16_addr (*pcptr);
*lenptr = sizeof (mips16_little_breakpoint);
return mips16_little_breakpoint;
}
else
{
- static unsigned char little_breakpoint[] = LITTLE_BREAKPOINT;
- static unsigned char pmon_little_breakpoint[] =
- PMON_LITTLE_BREAKPOINT;
- static unsigned char idt_little_breakpoint[] =
- IDT_LITTLE_BREAKPOINT;
+ static unsigned char little_breakpoint[] = { 0xd, 0, 0x5, 0 };
+ static unsigned char pmon_little_breakpoint[] = { 0xd, 0, 0, 0 };
+ static unsigned char idt_little_breakpoint[] = { 0xd, 0x0a, 0, 0 };
*lenptr = sizeof (little_breakpoint);
int i;
/* See if the name of the target function is __fn_stub_*. */
- if (find_pc_partial_function (target_pc, &name, NULL, NULL) == 0)
+ if (find_pc_partial_function (target_pc, &name, NULL, NULL) ==
+ 0)
return target_pc;
if (strncmp (name, "__fn_stub_", 10) != 0
&& strcmp (name, "etext") != 0
/* Find the starting address of the function containing the PC. If the
caller didn't give us a name, look it up at the same time. */
- if (find_pc_partial_function (pc, name ? NULL : &name, &start_addr, NULL) == 0)
+ if (find_pc_partial_function (pc, name ? NULL : &name, &start_addr, NULL) ==
+ 0)
return 0;
if (strncmp (name, "__mips16_call_stub_", 19) == 0)
/* If the PC is in __mips16_call_stub_{s,d}f_{0..10} but not at the start,
i.e. after the jal instruction, this is effectively a return stub. */
if (strncmp (name, "__mips16_call_stub_", 19) == 0
- && (name[19] == 's' || name[19] == 'd')
- && pc != start_addr)
+ && (name[19] == 's' || name[19] == 'd') && pc != start_addr)
return 1;
return 0; /* not a stub */
}
-/* Return a location where we can set a breakpoint that will be hit
- when an inferior function call returns. This is normally the
- program's entry point. Executables that don't have an entry
- point (e.g. programs in ROM) should define a symbol __CALL_DUMMY_ADDRESS
- whose address is the location where the breakpoint should be placed. */
-
-static CORE_ADDR
-mips_call_dummy_address (void)
-{
- struct minimal_symbol *sym;
-
- sym = lookup_minimal_symbol ("__CALL_DUMMY_ADDRESS", NULL, NULL);
- if (sym)
- return SYMBOL_VALUE_ADDRESS (sym);
- else
- return entry_point_address ();
-}
-
-
/* When debugging a 64 MIPS target running a 32 bit ABI, the size of
the register stored on the stack (32) is different to its real raw
size (64). The below ensures that registers are fetched from the
int *optimizedp,
CORE_ADDR *addrp,
struct frame_info *frame,
- int regnum,
- enum lval_type *lvalp)
+ int regnum, enum lval_type *lvalp)
{
CORE_ADDR addrx;
enum lval_type lvalx;
int optimizedx;
+ int realnumx;
- if (!target_has_registers)
- error ("No registers.");
+ /* Always a pseudo. */
+ gdb_assert (regnum >= NUM_REGS);
/* Make certain that all needed parameters are present. */
if (addrp == NULL)
lvalp = &lvalx;
if (optimizedp == NULL)
optimizedp = &optimizedx;
- generic_unwind_get_saved_register (raw_buffer, optimizedp, addrp, frame,
- regnum, lvalp);
- /* FIXME: cagney/2002-09-13: This is just so bad. The MIPS should
- have a pseudo register range that correspons to the ABI's, rather
- than the ISA's, view of registers. These registers would then
- implicitly describe their size and hence could be used without
- the below munging. */
- if ((*lvalp) == lval_memory)
- {
- if (raw_buffer != NULL)
- {
- if (regnum < 32)
- {
- /* Only MIPS_SAVED_REGSIZE bytes of GP registers are
- saved. */
- LONGEST val = read_memory_integer ((*addrp), MIPS_SAVED_REGSIZE);
- store_address (raw_buffer, REGISTER_RAW_SIZE (regnum), val);
- }
- }
- }
+
+ if ((regnum % NUM_REGS) == SP_REGNUM)
+ /* The SP_REGNUM is special, its value is stored in saved_regs.
+ In fact, it is so special that it can even only be fetched
+ using a raw register number! Once this code as been converted
+ to frame-unwind the problem goes away. */
+ frame_register_unwind (deprecated_get_next_frame_hack (frame),
+ regnum % NUM_REGS, optimizedp, lvalp, addrp,
+ &realnumx, raw_buffer);
+ else
+ /* Get it from the next frame. */
+ frame_register_unwind (deprecated_get_next_frame_hack (frame),
+ regnum, optimizedp, lvalp, addrp,
+ &realnumx, raw_buffer);
}
/* Immediately after a function call, return the saved pc.
}
-/* Convert a dbx stab register number (from `r' declaration) to a gdb
- REGNUM */
+/* Convert a dbx stab register number (from `r' declaration) to a GDB
+ [1 * NUM_REGS .. 2 * NUM_REGS) REGNUM. */
static int
mips_stab_reg_to_regnum (int num)
{
+ int regnum;
if (num >= 0 && num < 32)
- return num;
+ regnum = num;
else if (num >= 38 && num < 70)
- return num + FP0_REGNUM - 38;
+ regnum = num + mips_regnum (current_gdbarch)->fp0 - 38;
else if (num == 70)
- return HI_REGNUM;
+ regnum = mips_regnum (current_gdbarch)->hi;
else if (num == 71)
- return LO_REGNUM;
+ regnum = mips_regnum (current_gdbarch)->lo;
else
- {
- /* This will hopefully (eventually) provoke a warning. Should
- we be calling complaint() here? */
- return NUM_REGS + NUM_PSEUDO_REGS;
- }
+ /* This will hopefully (eventually) provoke a warning. Should
+ we be calling complaint() here? */
+ return NUM_REGS + NUM_PSEUDO_REGS;
+ return NUM_REGS + regnum;
}
-/* Convert a dwarf, dwarf2, or ecoff register number to a gdb REGNUM */
+/* Convert a dwarf, dwarf2, or ecoff register number to a GDB [1 *
+ NUM_REGS .. 2 * NUM_REGS) REGNUM. */
static int
mips_dwarf_dwarf2_ecoff_reg_to_regnum (int num)
{
+ int regnum;
if (num >= 0 && num < 32)
- return num;
+ regnum = num;
else if (num >= 32 && num < 64)
- return num + FP0_REGNUM - 32;
+ regnum = num + mips_regnum (current_gdbarch)->fp0 - 32;
else if (num == 64)
- return HI_REGNUM;
+ regnum = mips_regnum (current_gdbarch)->hi;
else if (num == 65)
- return LO_REGNUM;
+ regnum = mips_regnum (current_gdbarch)->lo;
else
- {
- /* This will hopefully (eventually) provoke a warning. Should
- we be calling complaint() here? */
- return NUM_REGS + NUM_PSEUDO_REGS;
- }
+ /* This will hopefully (eventually) provoke a warning. Should we
+ be calling complaint() here? */
+ return NUM_REGS + NUM_PSEUDO_REGS;
+ return NUM_REGS + regnum;
+}
+
+static int
+mips_register_sim_regno (int regnum)
+{
+ /* Only makes sense to supply raw registers. */
+ gdb_assert (regnum >= 0 && regnum < NUM_REGS);
+ /* FIXME: cagney/2002-05-13: Need to look at the pseudo register to
+ decide if it is valid. Should instead define a standard sim/gdb
+ register numbering scheme. */
+ if (REGISTER_NAME (NUM_REGS + regnum) != NULL
+ && REGISTER_NAME (NUM_REGS + regnum)[0] != '\0')
+ return regnum;
+ else
+ return LEGACY_SIM_REGNO_IGNORE;
}
if (mips_abi_strings[i] == mips_abi_string)
return (enum mips_abi) i;
- internal_error (__FILE__, __LINE__,
- "unknown ABI string");
+ internal_error (__FILE__, __LINE__, "unknown ABI string");
}
static struct gdbarch *
-mips_gdbarch_init (struct gdbarch_info info,
- struct gdbarch_list *arches)
+mips_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
{
- static LONGEST mips_call_dummy_words[] =
- {0};
struct gdbarch *gdbarch;
struct gdbarch_tdep *tdep;
int elf_flags;
enum mips_abi mips_abi, found_abi, wanted_abi;
-
- /* Reset the disassembly info, in case it was set to something
- non-default. */
- deprecated_tm_print_insn_info.flavour = bfd_target_unknown_flavour;
- deprecated_tm_print_insn_info.arch = bfd_arch_unknown;
- deprecated_tm_print_insn_info.mach = 0;
-
- elf_flags = 0;
-
- if (info.abfd)
- {
- /* First of all, extract the elf_flags, if available. */
- if (bfd_get_flavour (info.abfd) == bfd_target_elf_flavour)
- elf_flags = elf_elfheader (info.abfd)->e_flags;
- }
+ int num_regs;
+ enum mips_fpu_type fpu_type;
+
+ /* First of all, extract the elf_flags, if available. */
+ if (info.abfd && bfd_get_flavour (info.abfd) == bfd_target_elf_flavour)
+ elf_flags = elf_elfheader (info.abfd)->e_flags;
+ else if (arches != NULL)
+ elf_flags = gdbarch_tdep (arches->gdbarch)->elf_flags;
+ else
+ elf_flags = 0;
+ if (gdbarch_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_gdbarch_init: elf_flags = 0x%08x\n", elf_flags);
/* Check ELF_FLAGS to see if it specifies the ABI being used. */
switch ((elf_flags & EF_MIPS_ABI))
{
case E_MIPS_ABI_O32:
- mips_abi = MIPS_ABI_O32;
+ found_abi = MIPS_ABI_O32;
break;
case E_MIPS_ABI_O64:
- mips_abi = MIPS_ABI_O64;
+ found_abi = MIPS_ABI_O64;
break;
case E_MIPS_ABI_EABI32:
- mips_abi = MIPS_ABI_EABI32;
+ found_abi = MIPS_ABI_EABI32;
break;
case E_MIPS_ABI_EABI64:
- mips_abi = MIPS_ABI_EABI64;
+ found_abi = MIPS_ABI_EABI64;
break;
default:
if ((elf_flags & EF_MIPS_ABI2))
- mips_abi = MIPS_ABI_N32;
+ found_abi = MIPS_ABI_N32;
else
- mips_abi = MIPS_ABI_UNKNOWN;
+ found_abi = MIPS_ABI_UNKNOWN;
break;
}
/* GCC creates a pseudo-section whose name describes the ABI. */
- if (mips_abi == MIPS_ABI_UNKNOWN && info.abfd != NULL)
- bfd_map_over_sections (info.abfd, mips_find_abi_section, &mips_abi);
+ if (found_abi == MIPS_ABI_UNKNOWN && info.abfd != NULL)
+ bfd_map_over_sections (info.abfd, mips_find_abi_section, &found_abi);
- /* If we have no bfd, then mips_abi will still be MIPS_ABI_UNKNOWN.
- Use the ABI from the last architecture if there is one. */
- if (info.abfd == NULL && arches != NULL)
- mips_abi = gdbarch_tdep (arches->gdbarch)->found_abi;
+ /* If we have no usefu BFD information, use the ABI from the last
+ MIPS architecture (if there is one). */
+ if (found_abi == MIPS_ABI_UNKNOWN && info.abfd == NULL && arches != NULL)
+ found_abi = gdbarch_tdep (arches->gdbarch)->found_abi;
/* Try the architecture for any hint of the correct ABI. */
- if (mips_abi == MIPS_ABI_UNKNOWN
+ if (found_abi == MIPS_ABI_UNKNOWN
&& info.bfd_arch_info != NULL
&& info.bfd_arch_info->arch == bfd_arch_mips)
{
switch (info.bfd_arch_info->mach)
{
case bfd_mach_mips3900:
- mips_abi = MIPS_ABI_EABI32;
+ found_abi = MIPS_ABI_EABI32;
break;
case bfd_mach_mips4100:
case bfd_mach_mips5000:
- mips_abi = MIPS_ABI_EABI64;
+ found_abi = MIPS_ABI_EABI64;
break;
case bfd_mach_mips8000:
case bfd_mach_mips10000:
on IRIX. (Even for executables created by gcc.) */
if (bfd_get_flavour (info.abfd) == bfd_target_elf_flavour
&& elf_elfheader (info.abfd)->e_ident[EI_CLASS] == ELFCLASS64)
- mips_abi = MIPS_ABI_N64;
+ found_abi = MIPS_ABI_N64;
else
- mips_abi = MIPS_ABI_N32;
+ found_abi = MIPS_ABI_N32;
break;
}
}
- if (mips_abi == MIPS_ABI_UNKNOWN)
- mips_abi = MIPS_ABI_O32;
+ if (gdbarch_debug)
+ fprintf_unfiltered (gdb_stdlog, "mips_gdbarch_init: found_abi = %d\n",
+ found_abi);
+
+ /* What has the user specified from the command line? */
+ wanted_abi = global_mips_abi ();
+ if (gdbarch_debug)
+ fprintf_unfiltered (gdb_stdlog, "mips_gdbarch_init: wanted_abi = %d\n",
+ wanted_abi);
/* Now that we have found what the ABI for this binary would be,
check whether the user is overriding it. */
- found_abi = mips_abi;
- wanted_abi = global_mips_abi ();
if (wanted_abi != MIPS_ABI_UNKNOWN)
mips_abi = wanted_abi;
-
- /* We have to set deprecated_tm_print_insn_info before looking for a
- pre-existing architecture, otherwise we may return before we get
- a chance to set it up. */
- if (mips_abi == MIPS_ABI_N32 || mips_abi == MIPS_ABI_N64)
- {
- /* Set up the disassembler info, so that we get the right
- register names from libopcodes. */
- if (mips_abi == MIPS_ABI_N32)
- deprecated_tm_print_insn_info.disassembler_options = "gpr-names=n32";
- else
- deprecated_tm_print_insn_info.disassembler_options = "gpr-names=64";
- deprecated_tm_print_insn_info.flavour = bfd_target_elf_flavour;
- deprecated_tm_print_insn_info.arch = bfd_arch_mips;
- if (info.bfd_arch_info != NULL
- && info.bfd_arch_info->arch == bfd_arch_mips
- && info.bfd_arch_info->mach)
- deprecated_tm_print_insn_info.mach = info.bfd_arch_info->mach;
- else
- deprecated_tm_print_insn_info.mach = bfd_mach_mips8000;
- }
+ else if (found_abi != MIPS_ABI_UNKNOWN)
+ mips_abi = found_abi;
else
- /* This string is not recognized explicitly by the disassembler,
- but it tells the disassembler to not try to guess the ABI from
- the bfd elf headers, such that, if the user overrides the ABI
- of a program linked as NewABI, the disassembly will follow the
- register naming conventions specified by the user. */
- deprecated_tm_print_insn_info.disassembler_options = "gpr-names=32";
+ mips_abi = MIPS_ABI_O32;
+ if (gdbarch_debug)
+ fprintf_unfiltered (gdb_stdlog, "mips_gdbarch_init: mips_abi = %d\n",
+ mips_abi);
+ /* Also used when doing an architecture lookup. */
if (gdbarch_debug)
- {
- fprintf_unfiltered (gdb_stdlog,
- "mips_gdbarch_init: elf_flags = 0x%08x\n",
- elf_flags);
- fprintf_unfiltered (gdb_stdlog,
- "mips_gdbarch_init: mips_abi = %d\n",
- mips_abi);
- fprintf_unfiltered (gdb_stdlog,
- "mips_gdbarch_init: found_mips_abi = %d\n",
- found_abi);
- }
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_gdbarch_init: mips64_transfers_32bit_regs_p = %d\n",
+ mips64_transfers_32bit_regs_p);
+
+ /* Determine the MIPS FPU type. */
+ if (!mips_fpu_type_auto)
+ fpu_type = mips_fpu_type;
+ else if (info.bfd_arch_info != NULL
+ && info.bfd_arch_info->arch == bfd_arch_mips)
+ switch (info.bfd_arch_info->mach)
+ {
+ case bfd_mach_mips3900:
+ case bfd_mach_mips4100:
+ case bfd_mach_mips4111:
+ fpu_type = MIPS_FPU_NONE;
+ break;
+ case bfd_mach_mips4650:
+ fpu_type = MIPS_FPU_SINGLE;
+ break;
+ default:
+ fpu_type = MIPS_FPU_DOUBLE;
+ break;
+ }
+ else if (arches != NULL)
+ fpu_type = gdbarch_tdep (arches->gdbarch)->mips_fpu_type;
+ else
+ fpu_type = MIPS_FPU_DOUBLE;
+ if (gdbarch_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_gdbarch_init: fpu_type = %d\n", fpu_type);
/* try to find a pre-existing architecture */
for (arches = gdbarch_list_lookup_by_info (arches, &info);
continue;
if (gdbarch_tdep (arches->gdbarch)->mips_abi != mips_abi)
continue;
+ /* Need to be pedantic about which register virtual size is
+ used. */
+ if (gdbarch_tdep (arches->gdbarch)->mips64_transfers_32bit_regs_p
+ != mips64_transfers_32bit_regs_p)
+ continue;
+ /* Be pedantic about which FPU is selected. */
+ if (gdbarch_tdep (arches->gdbarch)->mips_fpu_type != fpu_type)
+ continue;
return arches->gdbarch;
}
tdep = (struct gdbarch_tdep *) xmalloc (sizeof (struct gdbarch_tdep));
gdbarch = gdbarch_alloc (&info, tdep);
tdep->elf_flags = elf_flags;
+ tdep->mips64_transfers_32bit_regs_p = mips64_transfers_32bit_regs_p;
+ tdep->found_abi = found_abi;
+ tdep->mips_abi = mips_abi;
+ tdep->mips_fpu_type = fpu_type;
/* Initially set everything according to the default ABI/ISA. */
set_gdbarch_short_bit (gdbarch, 16);
set_gdbarch_float_bit (gdbarch, 32);
set_gdbarch_double_bit (gdbarch, 64);
set_gdbarch_long_double_bit (gdbarch, 64);
- set_gdbarch_register_raw_size (gdbarch, mips_register_raw_size);
- set_gdbarch_deprecated_max_register_raw_size (gdbarch, 8);
- set_gdbarch_deprecated_max_register_virtual_size (gdbarch, 8);
- tdep->found_abi = found_abi;
- tdep->mips_abi = mips_abi;
+ set_gdbarch_register_reggroup_p (gdbarch, mips_register_reggroup_p);
+ set_gdbarch_pseudo_register_read (gdbarch, mips_pseudo_register_read);
+ set_gdbarch_pseudo_register_write (gdbarch, mips_pseudo_register_write);
- set_gdbarch_elf_make_msymbol_special (gdbarch,
+ set_gdbarch_elf_make_msymbol_special (gdbarch,
mips_elf_make_msymbol_special);
- if (info.osabi == GDB_OSABI_IRIX)
- set_gdbarch_num_regs (gdbarch, 71);
- else
- set_gdbarch_num_regs (gdbarch, 90);
+ /* Fill in the OS dependant register numbers and names. */
+ {
+ const char **reg_names;
+ struct mips_regnum *regnum = GDBARCH_OBSTACK_ZALLOC (gdbarch,
+ struct mips_regnum);
+ if (info.osabi == GDB_OSABI_IRIX)
+ {
+ regnum->fp0 = 32;
+ regnum->pc = 64;
+ regnum->cause = 65;
+ regnum->badvaddr = 66;
+ regnum->hi = 67;
+ regnum->lo = 68;
+ regnum->fp_control_status = 69;
+ regnum->fp_implementation_revision = 70;
+ num_regs = 71;
+ reg_names = mips_irix_reg_names;
+ }
+ else
+ {
+ regnum->lo = MIPS_EMBED_LO_REGNUM;
+ regnum->hi = MIPS_EMBED_HI_REGNUM;
+ regnum->badvaddr = MIPS_EMBED_BADVADDR_REGNUM;
+ regnum->cause = MIPS_EMBED_CAUSE_REGNUM;
+ regnum->pc = MIPS_EMBED_PC_REGNUM;
+ regnum->fp0 = MIPS_EMBED_FP0_REGNUM;
+ regnum->fp_control_status = 70;
+ regnum->fp_implementation_revision = 71;
+ num_regs = 90;
+ if (info.bfd_arch_info != NULL
+ && info.bfd_arch_info->mach == bfd_mach_mips3900)
+ reg_names = mips_tx39_reg_names;
+ else
+ reg_names = mips_generic_reg_names;
+ }
+ /* FIXME: cagney/2003-11-15: For MIPS, hasn't PC_REGNUM been
+ replaced by read_pc? */
+ set_gdbarch_pc_regnum (gdbarch, regnum->pc);
+ set_gdbarch_fp0_regnum (gdbarch, regnum->fp0);
+ set_gdbarch_num_regs (gdbarch, num_regs);
+ set_gdbarch_num_pseudo_regs (gdbarch, num_regs);
+ set_gdbarch_register_name (gdbarch, mips_register_name);
+ tdep->mips_processor_reg_names = reg_names;
+ tdep->regnum = regnum;
+ }
switch (mips_abi)
{
case MIPS_ABI_O32:
- set_gdbarch_deprecated_push_arguments (gdbarch, mips_o32_push_arguments);
- set_gdbarch_deprecated_store_return_value (gdbarch, mips_o32_store_return_value);
- set_gdbarch_extract_return_value (gdbarch, mips_o32_extract_return_value);
+ set_gdbarch_push_dummy_call (gdbarch, mips_o32_push_dummy_call);
+ set_gdbarch_return_value (gdbarch, mips_o32_return_value);
tdep->mips_default_saved_regsize = 4;
tdep->mips_default_stack_argsize = 4;
tdep->mips_fp_register_double = 0;
tdep->mips_last_arg_regnum = A0_REGNUM + 4 - 1;
- tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 4 - 1;
- tdep->gdb_target_is_mips64 = 0;
+ tdep->mips_last_fp_arg_regnum = tdep->regnum->fp0 + 12 + 4 - 1;
tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 32);
set_gdbarch_ptr_bit (gdbarch, 32);
set_gdbarch_long_long_bit (gdbarch, 64);
- set_gdbarch_reg_struct_has_addr (gdbarch,
- mips_o32_reg_struct_has_addr);
- set_gdbarch_use_struct_convention (gdbarch,
- mips_o32_use_struct_convention);
break;
case MIPS_ABI_O64:
- set_gdbarch_deprecated_push_arguments (gdbarch, mips_o64_push_arguments);
- set_gdbarch_deprecated_store_return_value (gdbarch, mips_o64_store_return_value);
- set_gdbarch_deprecated_extract_return_value (gdbarch, mips_o64_extract_return_value);
+ set_gdbarch_push_dummy_call (gdbarch, mips_o64_push_dummy_call);
+ set_gdbarch_deprecated_store_return_value (gdbarch,
+ mips_o64_store_return_value);
+ set_gdbarch_deprecated_extract_return_value (gdbarch,
+ mips_o64_extract_return_value);
tdep->mips_default_saved_regsize = 8;
tdep->mips_default_stack_argsize = 8;
tdep->mips_fp_register_double = 1;
tdep->mips_last_arg_regnum = A0_REGNUM + 4 - 1;
- tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 4 - 1;
- tdep->gdb_target_is_mips64 = 1;
+ tdep->mips_last_fp_arg_regnum = tdep->regnum->fp0 + 12 + 4 - 1;
tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 32);
set_gdbarch_ptr_bit (gdbarch, 32);
set_gdbarch_long_long_bit (gdbarch, 64);
- set_gdbarch_reg_struct_has_addr (gdbarch,
- mips_o32_reg_struct_has_addr);
- set_gdbarch_use_struct_convention (gdbarch,
- mips_o32_use_struct_convention);
+ set_gdbarch_use_struct_convention (gdbarch,
+ always_use_struct_convention);
break;
case MIPS_ABI_EABI32:
- set_gdbarch_deprecated_push_arguments (gdbarch, mips_eabi_push_arguments);
- set_gdbarch_deprecated_store_return_value (gdbarch, mips_eabi_store_return_value);
- set_gdbarch_deprecated_extract_return_value (gdbarch, mips_eabi_extract_return_value);
+ set_gdbarch_push_dummy_call (gdbarch, mips_eabi_push_dummy_call);
+ set_gdbarch_deprecated_store_return_value (gdbarch,
+ mips_eabi_store_return_value);
+ set_gdbarch_deprecated_extract_return_value (gdbarch,
+ mips_eabi_extract_return_value);
tdep->mips_default_saved_regsize = 4;
tdep->mips_default_stack_argsize = 4;
tdep->mips_fp_register_double = 0;
tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1;
- tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 8 - 1;
- tdep->gdb_target_is_mips64 = 0;
+ tdep->mips_last_fp_arg_regnum = tdep->regnum->fp0 + 12 + 8 - 1;
tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 32);
set_gdbarch_ptr_bit (gdbarch, 32);
set_gdbarch_long_long_bit (gdbarch, 64);
- set_gdbarch_reg_struct_has_addr (gdbarch,
- mips_eabi_reg_struct_has_addr);
- set_gdbarch_use_struct_convention (gdbarch,
+ set_gdbarch_deprecated_reg_struct_has_addr
+ (gdbarch, mips_eabi_reg_struct_has_addr);
+ set_gdbarch_use_struct_convention (gdbarch,
mips_eabi_use_struct_convention);
break;
case MIPS_ABI_EABI64:
- set_gdbarch_deprecated_push_arguments (gdbarch, mips_eabi_push_arguments);
- set_gdbarch_deprecated_store_return_value (gdbarch, mips_eabi_store_return_value);
- set_gdbarch_deprecated_extract_return_value (gdbarch, mips_eabi_extract_return_value);
+ set_gdbarch_push_dummy_call (gdbarch, mips_eabi_push_dummy_call);
+ set_gdbarch_deprecated_store_return_value (gdbarch,
+ mips_eabi_store_return_value);
+ set_gdbarch_deprecated_extract_return_value (gdbarch,
+ mips_eabi_extract_return_value);
tdep->mips_default_saved_regsize = 8;
tdep->mips_default_stack_argsize = 8;
tdep->mips_fp_register_double = 1;
tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1;
- tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 8 - 1;
- tdep->gdb_target_is_mips64 = 1;
+ tdep->mips_last_fp_arg_regnum = tdep->regnum->fp0 + 12 + 8 - 1;
tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 64);
set_gdbarch_ptr_bit (gdbarch, 64);
set_gdbarch_long_long_bit (gdbarch, 64);
- set_gdbarch_reg_struct_has_addr (gdbarch,
- mips_eabi_reg_struct_has_addr);
- set_gdbarch_use_struct_convention (gdbarch,
+ set_gdbarch_deprecated_reg_struct_has_addr
+ (gdbarch, mips_eabi_reg_struct_has_addr);
+ set_gdbarch_use_struct_convention (gdbarch,
mips_eabi_use_struct_convention);
break;
case MIPS_ABI_N32:
- set_gdbarch_deprecated_push_arguments (gdbarch, mips_n32n64_push_arguments);
- set_gdbarch_deprecated_store_return_value (gdbarch, mips_n32n64_store_return_value);
- set_gdbarch_extract_return_value (gdbarch, mips_n32n64_extract_return_value);
+ set_gdbarch_push_dummy_call (gdbarch, mips_n32n64_push_dummy_call);
+ set_gdbarch_return_value (gdbarch, mips_n32n64_return_value);
tdep->mips_default_saved_regsize = 8;
tdep->mips_default_stack_argsize = 8;
tdep->mips_fp_register_double = 1;
tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1;
- tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 8 - 1;
- tdep->gdb_target_is_mips64 = 1;
+ tdep->mips_last_fp_arg_regnum = tdep->regnum->fp0 + 12 + 8 - 1;
tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 32);
set_gdbarch_ptr_bit (gdbarch, 32);
set_gdbarch_long_long_bit (gdbarch, 64);
- set_gdbarch_use_struct_convention (gdbarch,
- mips_n32n64_use_struct_convention);
- set_gdbarch_reg_struct_has_addr (gdbarch,
- mips_n32n64_reg_struct_has_addr);
break;
case MIPS_ABI_N64:
- set_gdbarch_deprecated_push_arguments (gdbarch, mips_n32n64_push_arguments);
- set_gdbarch_deprecated_store_return_value (gdbarch, mips_n32n64_store_return_value);
- set_gdbarch_extract_return_value (gdbarch, mips_n32n64_extract_return_value);
+ set_gdbarch_push_dummy_call (gdbarch, mips_n32n64_push_dummy_call);
+ set_gdbarch_return_value (gdbarch, mips_n32n64_return_value);
tdep->mips_default_saved_regsize = 8;
tdep->mips_default_stack_argsize = 8;
tdep->mips_fp_register_double = 1;
tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1;
- tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 8 - 1;
- tdep->gdb_target_is_mips64 = 1;
+ tdep->mips_last_fp_arg_regnum = tdep->regnum->fp0 + 12 + 8 - 1;
tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 64);
set_gdbarch_ptr_bit (gdbarch, 64);
set_gdbarch_long_long_bit (gdbarch, 64);
- set_gdbarch_use_struct_convention (gdbarch,
- mips_n32n64_use_struct_convention);
- set_gdbarch_reg_struct_has_addr (gdbarch,
- mips_n32n64_reg_struct_has_addr);
break;
default:
- internal_error (__FILE__, __LINE__,
- "unknown ABI in switch");
+ internal_error (__FILE__, __LINE__, "unknown ABI in switch");
}
/* FIXME: jlarmour/2000-04-07: There *is* a flag EF_MIPS_32BIT_MODE
the current gcc - it would make GDB treat these 64-bit programs
as 32-bit programs by default. */
- /* enable/disable the MIPS FPU */
- if (!mips_fpu_type_auto)
- tdep->mips_fpu_type = mips_fpu_type;
- else if (info.bfd_arch_info != NULL
- && info.bfd_arch_info->arch == bfd_arch_mips)
- switch (info.bfd_arch_info->mach)
- {
- case bfd_mach_mips3900:
- case bfd_mach_mips4100:
- case bfd_mach_mips4111:
- tdep->mips_fpu_type = MIPS_FPU_NONE;
- break;
- case bfd_mach_mips4650:
- tdep->mips_fpu_type = MIPS_FPU_SINGLE;
- break;
- default:
- tdep->mips_fpu_type = MIPS_FPU_DOUBLE;
- break;
- }
- else
- tdep->mips_fpu_type = MIPS_FPU_DOUBLE;
-
- /* MIPS version of register names. NOTE: At present the MIPS
- register name management is part way between the old -
- #undef/#define REGISTER_NAMES and the new REGISTER_NAME(nr).
- Further work on it is required. */
- /* NOTE: many targets (esp. embedded) do not go thru the
- gdbarch_register_name vector at all, instead bypassing it
- by defining REGISTER_NAMES. */
- set_gdbarch_register_name (gdbarch, mips_register_name);
set_gdbarch_read_pc (gdbarch, mips_read_pc);
- set_gdbarch_write_pc (gdbarch, generic_target_write_pc);
- set_gdbarch_deprecated_target_read_fp (gdbarch, mips_read_sp); /* Draft FRAME base. */
+ set_gdbarch_write_pc (gdbarch, mips_write_pc);
+ set_gdbarch_deprecated_target_read_fp (gdbarch, mips_read_sp); /* Draft FRAME base. */
set_gdbarch_read_sp (gdbarch, mips_read_sp);
- set_gdbarch_deprecated_dummy_write_sp (gdbarch, generic_target_write_sp);
/* Add/remove bits from an address. The MIPS needs be careful to
ensure that all 32 bit addresses are sign extended to 64 bits. */
/* There's a mess in stack frame creation. See comments in
blockframe.c near reference to DEPRECATED_INIT_FRAME_PC_FIRST. */
- set_gdbarch_deprecated_init_frame_pc_first (gdbarch, mips_init_frame_pc_first);
- set_gdbarch_deprecated_init_frame_pc (gdbarch, init_frame_pc_noop);
+ set_gdbarch_deprecated_init_frame_pc_first (gdbarch,
+ mips_init_frame_pc_first);
/* Map debug register numbers onto internal register numbers. */
set_gdbarch_stab_reg_to_regnum (gdbarch, mips_stab_reg_to_regnum);
- set_gdbarch_ecoff_reg_to_regnum (gdbarch, mips_dwarf_dwarf2_ecoff_reg_to_regnum);
- set_gdbarch_dwarf_reg_to_regnum (gdbarch, mips_dwarf_dwarf2_ecoff_reg_to_regnum);
- set_gdbarch_dwarf2_reg_to_regnum (gdbarch, mips_dwarf_dwarf2_ecoff_reg_to_regnum);
+ set_gdbarch_ecoff_reg_to_regnum (gdbarch,
+ mips_dwarf_dwarf2_ecoff_reg_to_regnum);
+ set_gdbarch_dwarf_reg_to_regnum (gdbarch,
+ mips_dwarf_dwarf2_ecoff_reg_to_regnum);
+ set_gdbarch_dwarf2_reg_to_regnum (gdbarch,
+ mips_dwarf_dwarf2_ecoff_reg_to_regnum);
+ set_gdbarch_register_sim_regno (gdbarch, mips_register_sim_regno);
/* Initialize a frame */
- set_gdbarch_deprecated_frame_init_saved_regs (gdbarch, mips_frame_init_saved_regs);
- set_gdbarch_deprecated_init_extra_frame_info (gdbarch, mips_init_extra_frame_info);
+ set_gdbarch_deprecated_frame_init_saved_regs (gdbarch,
+ mips_find_saved_regs);
+ set_gdbarch_deprecated_init_extra_frame_info (gdbarch,
+ mips_init_extra_frame_info);
/* MIPS version of CALL_DUMMY */
- set_gdbarch_call_dummy_address (gdbarch, mips_call_dummy_address);
- set_gdbarch_deprecated_push_return_address (gdbarch, mips_push_return_address);
+ /* NOTE: cagney/2003-08-05: Eventually call dummy location will be
+ replaced by a command, and all targets will default to on stack
+ (regardless of the stack's execute status). */
+ set_gdbarch_call_dummy_location (gdbarch, AT_SYMBOL);
set_gdbarch_deprecated_pop_frame (gdbarch, mips_pop_frame);
- set_gdbarch_deprecated_fix_call_dummy (gdbarch, mips_fix_call_dummy);
- set_gdbarch_deprecated_call_dummy_words (gdbarch, mips_call_dummy_words);
- set_gdbarch_deprecated_sizeof_call_dummy_words (gdbarch, sizeof (mips_call_dummy_words));
- set_gdbarch_deprecated_push_return_address (gdbarch, mips_push_return_address);
set_gdbarch_frame_align (gdbarch, mips_frame_align);
- set_gdbarch_save_dummy_frame_tos (gdbarch, generic_save_dummy_frame_tos);
- set_gdbarch_register_convertible (gdbarch, mips_register_convertible);
- set_gdbarch_register_convert_to_virtual (gdbarch,
- mips_register_convert_to_virtual);
- set_gdbarch_register_convert_to_raw (gdbarch,
- mips_register_convert_to_raw);
+ set_gdbarch_deprecated_save_dummy_frame_tos (gdbarch,
+ generic_save_dummy_frame_tos);
+
+ set_gdbarch_convert_register_p (gdbarch, mips_convert_register_p);
+ set_gdbarch_register_to_value (gdbarch, mips_register_to_value);
+ set_gdbarch_value_to_register (gdbarch, mips_value_to_register);
set_gdbarch_deprecated_frame_chain (gdbarch, mips_frame_chain);
- set_gdbarch_frameless_function_invocation (gdbarch,
+ set_gdbarch_frameless_function_invocation (gdbarch,
generic_frameless_function_invocation_not);
set_gdbarch_deprecated_frame_saved_pc (gdbarch, mips_frame_saved_pc);
- set_gdbarch_frame_num_args (gdbarch, frame_num_args_unknown);
set_gdbarch_frame_args_skip (gdbarch, 0);
- set_gdbarch_deprecated_get_saved_register (gdbarch, mips_get_saved_register);
+ set_gdbarch_deprecated_get_saved_register (gdbarch,
+ mips_get_saved_register);
set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
set_gdbarch_breakpoint_from_pc (gdbarch, mips_breakpoint_from_pc);
- set_gdbarch_decr_pc_after_break (gdbarch, 0);
set_gdbarch_skip_prologue (gdbarch, mips_skip_prologue);
- set_gdbarch_deprecated_saved_pc_after_call (gdbarch, mips_saved_pc_after_call);
+ set_gdbarch_deprecated_saved_pc_after_call (gdbarch,
+ mips_saved_pc_after_call);
set_gdbarch_pointer_to_address (gdbarch, signed_pointer_to_address);
set_gdbarch_address_to_pointer (gdbarch, address_to_signed_pointer);
set_gdbarch_integer_to_address (gdbarch, mips_integer_to_address);
- set_gdbarch_function_start_offset (gdbarch, 0);
-
- /* There are MIPS targets which do not yet use this since they still
- define REGISTER_VIRTUAL_TYPE. */
- set_gdbarch_register_virtual_type (gdbarch, mips_register_virtual_type);
- set_gdbarch_register_virtual_size (gdbarch, generic_register_size);
+ set_gdbarch_register_type (gdbarch, mips_register_type);
- set_gdbarch_deprecated_do_registers_info (gdbarch, mips_do_registers_info);
+ set_gdbarch_print_registers_info (gdbarch, mips_print_registers_info);
set_gdbarch_pc_in_sigtramp (gdbarch, mips_pc_in_sigtramp);
+ set_gdbarch_print_insn (gdbarch, gdb_print_insn_mips);
+
+ /* FIXME: cagney/2003-08-29: The macros HAVE_STEPPABLE_WATCHPOINT,
+ HAVE_NONSTEPPABLE_WATCHPOINT, and HAVE_CONTINUABLE_WATCHPOINT
+ need to all be folded into the target vector. Since they are
+ being used as guards for STOPPED_BY_WATCHPOINT, why not have
+ STOPPED_BY_WATCHPOINT return the type of watchpoint that the code
+ is sitting on? */
+ set_gdbarch_have_nonsteppable_watchpoint (gdbarch, 1);
+
/* Hook in OS ABI-specific overrides, if they have been registered. */
gdbarch_init_osabi (info, gdbarch);
- set_gdbarch_deprecated_store_struct_return (gdbarch, mips_store_struct_return);
- set_gdbarch_extract_struct_value_address (gdbarch,
- mips_extract_struct_value_address);
-
set_gdbarch_skip_trampoline_code (gdbarch, mips_skip_stub);
set_gdbarch_in_solib_call_trampoline (gdbarch, mips_in_call_stub);
}
static void
-mips_abi_update (char *ignore_args, int from_tty,
- struct cmd_list_element *c)
+mips_abi_update (char *ignore_args, int from_tty, struct cmd_list_element *c)
{
struct gdbarch_info info;
show_mips_abi (char *ignore_args, int from_tty)
{
if (gdbarch_bfd_arch_info (current_gdbarch)->arch != bfd_arch_mips)
- printf_filtered (
- "The MIPS ABI is unknown because the current architecture is not MIPS.\n");
+ printf_filtered
+ ("The MIPS ABI is unknown because the current architecture is not MIPS.\n");
else
{
enum mips_abi global_abi = global_mips_abi ();
const char *actual_abi_str = mips_abi_strings[actual_abi];
if (global_abi == MIPS_ABI_UNKNOWN)
- printf_filtered ("The MIPS ABI is set automatically (currently \"%s\").\n",
- actual_abi_str);
+ printf_filtered
+ ("The MIPS ABI is set automatically (currently \"%s\").\n",
+ actual_abi_str);
else if (global_abi == actual_abi)
- printf_filtered (
- "The MIPS ABI is assumed to be \"%s\" (due to user setting).\n",
- actual_abi_str);
+ printf_filtered
+ ("The MIPS ABI is assumed to be \"%s\" (due to user setting).\n",
+ actual_abi_str);
else
{
/* Probably shouldn't happen... */
- printf_filtered (
- "The (auto detected) MIPS ABI \"%s\" is in use even though the user setting was \"%s\".\n",
- actual_abi_str,
- mips_abi_strings[global_abi]);
+ printf_filtered
+ ("The (auto detected) MIPS ABI \"%s\" is in use even though the user setting was \"%s\".\n",
+ actual_abi_str, mips_abi_strings[global_abi]);
}
}
}
ef_mips_arch);
fprintf_unfiltered (file,
"mips_dump_tdep: tdep->mips_abi = %d (%s)\n",
- tdep->mips_abi,
- mips_abi_strings[tdep->mips_abi]);
+ tdep->mips_abi, mips_abi_strings[tdep->mips_abi]);
fprintf_unfiltered (file,
"mips_dump_tdep: mips_mask_address_p() %d (default %d)\n",
- mips_mask_address_p (),
+ mips_mask_address_p (tdep),
tdep->default_mask_address_p);
}
fprintf_unfiltered (file,
: MIPS_DEFAULT_FPU_TYPE == MIPS_FPU_SINGLE ? "single"
: MIPS_DEFAULT_FPU_TYPE == MIPS_FPU_DOUBLE ? "double"
: "???"));
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_EABI = %d\n",
- MIPS_EABI);
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_LAST_FP_ARG_REGNUM = %d (%d regs)\n",
- MIPS_LAST_FP_ARG_REGNUM,
- MIPS_LAST_FP_ARG_REGNUM - FPA0_REGNUM + 1);
+ fprintf_unfiltered (file, "mips_dump_tdep: MIPS_EABI = %d\n", MIPS_EABI);
fprintf_unfiltered (file,
"mips_dump_tdep: MIPS_FPU_TYPE = %d (%s)\n",
MIPS_FPU_TYPE,
: MIPS_FPU_TYPE == MIPS_FPU_SINGLE ? "single"
: MIPS_FPU_TYPE == MIPS_FPU_DOUBLE ? "double"
: "???"));
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_DEFAULT_SAVED_REGSIZE = %d\n",
- MIPS_DEFAULT_SAVED_REGSIZE);
fprintf_unfiltered (file,
"mips_dump_tdep: FP_REGISTER_DOUBLE = %d\n",
FP_REGISTER_DOUBLE);
fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_DEFAULT_STACK_ARGSIZE = %d\n",
- MIPS_DEFAULT_STACK_ARGSIZE);
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_STACK_ARGSIZE = %d\n",
- MIPS_STACK_ARGSIZE);
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_REGSIZE = %d\n",
- MIPS_REGSIZE);
- fprintf_unfiltered (file,
- "mips_dump_tdep: A0_REGNUM = %d\n",
- A0_REGNUM);
+ "mips_dump_tdep: mips_stack_argsize() = %d\n",
+ mips_stack_argsize (tdep));
+ fprintf_unfiltered (file, "mips_dump_tdep: A0_REGNUM = %d\n", A0_REGNUM);
fprintf_unfiltered (file,
"mips_dump_tdep: ADDR_BITS_REMOVE # %s\n",
- XSTRING (ADDR_BITS_REMOVE(ADDR)));
+ XSTRING (ADDR_BITS_REMOVE (ADDR)));
fprintf_unfiltered (file,
"mips_dump_tdep: ATTACH_DETACH # %s\n",
XSTRING (ATTACH_DETACH));
- fprintf_unfiltered (file,
- "mips_dump_tdep: BADVADDR_REGNUM = %d\n",
- BADVADDR_REGNUM);
- fprintf_unfiltered (file,
- "mips_dump_tdep: BIG_BREAKPOINT = delete?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: CAUSE_REGNUM = %d\n",
- CAUSE_REGNUM);
fprintf_unfiltered (file,
"mips_dump_tdep: DWARF_REG_TO_REGNUM # %s\n",
XSTRING (DWARF_REG_TO_REGNUM (REGNUM)));
fprintf_unfiltered (file,
"mips_dump_tdep: ECOFF_REG_TO_REGNUM # %s\n",
XSTRING (ECOFF_REG_TO_REGNUM (REGNUM)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: FCRCS_REGNUM = %d\n",
- FCRCS_REGNUM);
- fprintf_unfiltered (file,
- "mips_dump_tdep: FCRIR_REGNUM = %d\n",
- FCRIR_REGNUM);
fprintf_unfiltered (file,
"mips_dump_tdep: FIRST_EMBED_REGNUM = %d\n",
FIRST_EMBED_REGNUM);
- fprintf_unfiltered (file,
- "mips_dump_tdep: FPA0_REGNUM = %d\n",
- FPA0_REGNUM);
- fprintf_unfiltered (file,
- "mips_dump_tdep: GDB_TARGET_IS_MIPS64 = %d\n",
- GDB_TARGET_IS_MIPS64);
- fprintf_unfiltered (file,
- "mips_dump_tdep: HAVE_NONSTEPPABLE_WATCHPOINT # %s\n",
- XSTRING (HAVE_NONSTEPPABLE_WATCHPOINT));
- fprintf_unfiltered (file,
- "mips_dump_tdep: HI_REGNUM = %d\n",
- HI_REGNUM);
- fprintf_unfiltered (file,
- "mips_dump_tdep: IDT_BIG_BREAKPOINT = delete?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: IDT_LITTLE_BREAKPOINT = delete?\n");
fprintf_unfiltered (file,
"mips_dump_tdep: IGNORE_HELPER_CALL # %s\n",
XSTRING (IGNORE_HELPER_CALL (PC)));
fprintf_unfiltered (file,
"mips_dump_tdep: IN_SOLIB_RETURN_TRAMPOLINE # %s\n",
XSTRING (IN_SOLIB_RETURN_TRAMPOLINE (PC, NAME)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: IS_MIPS16_ADDR = FIXME!\n");
fprintf_unfiltered (file,
"mips_dump_tdep: LAST_EMBED_REGNUM = %d\n",
LAST_EMBED_REGNUM);
- fprintf_unfiltered (file,
- "mips_dump_tdep: LITTLE_BREAKPOINT = delete?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: LO_REGNUM = %d\n",
- LO_REGNUM);
#ifdef MACHINE_CPROC_FP_OFFSET
fprintf_unfiltered (file,
"mips_dump_tdep: MACHINE_CPROC_FP_OFFSET = %d\n",
"mips_dump_tdep: MACHINE_CPROC_SP_OFFSET = %d\n",
MACHINE_CPROC_SP_OFFSET);
#endif
- fprintf_unfiltered (file,
- "mips_dump_tdep: MAKE_MIPS16_ADDR = FIXME!\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS16_BIG_BREAKPOINT = delete?\n");
fprintf_unfiltered (file,
"mips_dump_tdep: MIPS16_INSTLEN = %d\n",
MIPS16_INSTLEN);
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS16_LITTLE_BREAKPOINT = delete?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_DEFAULT_ABI = FIXME!\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: MIPS_DEFAULT_ABI = FIXME!\n");
fprintf_unfiltered (file,
"mips_dump_tdep: MIPS_EFI_SYMBOL_NAME = multi-arch!!\n");
fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_INSTLEN = %d\n",
- MIPS_INSTLEN);
+ "mips_dump_tdep: MIPS_INSTLEN = %d\n", MIPS_INSTLEN);
fprintf_unfiltered (file,
"mips_dump_tdep: MIPS_LAST_ARG_REGNUM = %d (%d regs)\n",
MIPS_LAST_ARG_REGNUM,
MIPS_LAST_ARG_REGNUM - A0_REGNUM + 1);
fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_NUMREGS = %d\n",
- MIPS_NUMREGS);
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_REGISTER_NAMES = delete?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_SAVED_REGSIZE = %d\n",
- MIPS_SAVED_REGSIZE);
- fprintf_unfiltered (file,
- "mips_dump_tdep: OP_LDFPR = used?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: OP_LDGPR = used?\n");
+ "mips_dump_tdep: MIPS_NUMREGS = %d\n", MIPS_NUMREGS);
fprintf_unfiltered (file,
- "mips_dump_tdep: PMON_BIG_BREAKPOINT = delete?\n");
+ "mips_dump_tdep: mips_saved_regsize() = %d\n",
+ mips_saved_regsize (tdep));
fprintf_unfiltered (file,
- "mips_dump_tdep: PMON_LITTLE_BREAKPOINT = delete?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PRID_REGNUM = %d\n",
- PRID_REGNUM);
- fprintf_unfiltered (file,
- "mips_dump_tdep: PRINT_EXTRA_FRAME_INFO # %s\n",
- XSTRING (PRINT_EXTRA_FRAME_INFO (FRAME)));
+ "mips_dump_tdep: PRID_REGNUM = %d\n", PRID_REGNUM);
fprintf_unfiltered (file,
"mips_dump_tdep: PROC_DESC_IS_DUMMY = function?\n");
fprintf_unfiltered (file,
"mips_dump_tdep: PROC_FRAME_ADJUST = function?\n");
fprintf_unfiltered (file,
"mips_dump_tdep: PROC_FRAME_OFFSET = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_FRAME_REG = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_FREG_MASK = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_FREG_OFFSET = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_HIGH_ADDR = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_LOW_ADDR = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_PC_REG = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_REG_MASK = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_REG_OFFSET = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_SYMBOL = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PS_REGNUM = %d\n",
- PS_REGNUM);
- fprintf_unfiltered (file,
- "mips_dump_tdep: RA_REGNUM = %d\n",
- RA_REGNUM);
- fprintf_unfiltered (file,
- "mips_dump_tdep: REGISTER_CONVERT_FROM_TYPE # %s\n",
- XSTRING (REGISTER_CONVERT_FROM_TYPE (REGNUM, VALTYPE, RAW_BUFFER)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: REGISTER_CONVERT_TO_TYPE # %s\n",
- XSTRING (REGISTER_CONVERT_TO_TYPE (REGNUM, VALTYPE, RAW_BUFFER)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: REGISTER_NAMES = delete?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: ROUND_DOWN = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: ROUND_UP = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_FRAME_REG = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_FREG_MASK = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_FREG_OFFSET = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_HIGH_ADDR = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_LOW_ADDR = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_PC_REG = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_REG_MASK = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_REG_OFFSET = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_SYMBOL = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PS_REGNUM = %d\n", PS_REGNUM);
+ fprintf_unfiltered (file, "mips_dump_tdep: RA_REGNUM = %d\n", RA_REGNUM);
#ifdef SAVED_BYTES
fprintf_unfiltered (file,
- "mips_dump_tdep: SAVED_BYTES = %d\n",
- SAVED_BYTES);
+ "mips_dump_tdep: SAVED_BYTES = %d\n", SAVED_BYTES);
#endif
#ifdef SAVED_FP
- fprintf_unfiltered (file,
- "mips_dump_tdep: SAVED_FP = %d\n",
- SAVED_FP);
+ fprintf_unfiltered (file, "mips_dump_tdep: SAVED_FP = %d\n", SAVED_FP);
#endif
#ifdef SAVED_PC
- fprintf_unfiltered (file,
- "mips_dump_tdep: SAVED_PC = %d\n",
- SAVED_PC);
+ fprintf_unfiltered (file, "mips_dump_tdep: SAVED_PC = %d\n", SAVED_PC);
#endif
fprintf_unfiltered (file,
"mips_dump_tdep: SETUP_ARBITRARY_FRAME # %s\n",
fprintf_unfiltered (file,
"mips_dump_tdep: SET_PROC_DESC_IS_DUMMY = function?\n");
fprintf_unfiltered (file,
- "mips_dump_tdep: SIGFRAME_BASE = %d\n",
- SIGFRAME_BASE);
+ "mips_dump_tdep: SIGFRAME_BASE = %d\n", SIGFRAME_BASE);
fprintf_unfiltered (file,
"mips_dump_tdep: SIGFRAME_FPREGSAVE_OFF = %d\n",
SIGFRAME_FPREGSAVE_OFF);
fprintf_unfiltered (file,
"mips_dump_tdep: SIGFRAME_REGSAVE_OFF = %d\n",
SIGFRAME_REGSAVE_OFF);
- fprintf_unfiltered (file,
- "mips_dump_tdep: SIGFRAME_REG_SIZE = %d\n",
- SIGFRAME_REG_SIZE);
fprintf_unfiltered (file,
"mips_dump_tdep: SKIP_TRAMPOLINE_CODE # %s\n",
XSTRING (SKIP_TRAMPOLINE_CODE (PC)));
fprintf_unfiltered (file,
"mips_dump_tdep: STOPPED_BY_WATCHPOINT # %s\n",
XSTRING (STOPPED_BY_WATCHPOINT (WS)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: T9_REGNUM = %d\n",
- T9_REGNUM);
+ fprintf_unfiltered (file, "mips_dump_tdep: T9_REGNUM = %d\n", T9_REGNUM);
fprintf_unfiltered (file,
"mips_dump_tdep: TABULAR_REGISTER_OUTPUT = used?\n");
fprintf_unfiltered (file,
"mips_dump_tdep: TARGET_CAN_USE_HARDWARE_WATCHPOINT # %s\n",
- XSTRING (TARGET_CAN_USE_HARDWARE_WATCHPOINT (TYPE,CNT,OTHERTYPE)));
+ XSTRING (TARGET_CAN_USE_HARDWARE_WATCHPOINT
+ (TYPE, CNT, OTHERTYPE)));
fprintf_unfiltered (file,
"mips_dump_tdep: TARGET_HAS_HARDWARE_WATCHPOINTS # %s\n",
XSTRING (TARGET_HAS_HARDWARE_WATCHPOINTS));
- fprintf_unfiltered (file,
- "mips_dump_tdep: TARGET_MIPS = used?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: TM_PRINT_INSN_MACH # %s\n",
- XSTRING (TM_PRINT_INSN_MACH));
#ifdef TRACE_CLEAR
fprintf_unfiltered (file,
"mips_dump_tdep: TRACE_CLEAR # %s\n",
#endif
#ifdef TRACE_FLAVOR
fprintf_unfiltered (file,
- "mips_dump_tdep: TRACE_FLAVOR = %d\n",
- TRACE_FLAVOR);
+ "mips_dump_tdep: TRACE_FLAVOR = %d\n", TRACE_FLAVOR);
#endif
#ifdef TRACE_FLAVOR_SIZE
fprintf_unfiltered (file,
#ifdef TRACE_SET
fprintf_unfiltered (file,
"mips_dump_tdep: TRACE_SET # %s\n",
- XSTRING (TRACE_SET (X,STATE)));
+ XSTRING (TRACE_SET (X, STATE)));
#endif
- fprintf_unfiltered (file,
- "mips_dump_tdep: UNMAKE_MIPS16_ADDR = function?\n");
#ifdef UNUSED_REGNUM
fprintf_unfiltered (file,
- "mips_dump_tdep: UNUSED_REGNUM = %d\n",
- UNUSED_REGNUM);
+ "mips_dump_tdep: UNUSED_REGNUM = %d\n", UNUSED_REGNUM);
#endif
- fprintf_unfiltered (file,
- "mips_dump_tdep: V0_REGNUM = %d\n",
- V0_REGNUM);
+ fprintf_unfiltered (file, "mips_dump_tdep: V0_REGNUM = %d\n", V0_REGNUM);
fprintf_unfiltered (file,
"mips_dump_tdep: VM_MIN_ADDRESS = %ld\n",
(long) VM_MIN_ADDRESS);
-#ifdef VX_NUM_REGS
- fprintf_unfiltered (file,
- "mips_dump_tdep: VX_NUM_REGS = %d (used?)\n",
- VX_NUM_REGS);
-#endif
fprintf_unfiltered (file,
- "mips_dump_tdep: ZERO_REGNUM = %d\n",
- ZERO_REGNUM);
+ "mips_dump_tdep: ZERO_REGNUM = %d\n", ZERO_REGNUM);
fprintf_unfiltered (file,
- "mips_dump_tdep: _PROC_MAGIC_ = %d\n",
- _PROC_MAGIC_);
+ "mips_dump_tdep: _PROC_MAGIC_ = %d\n", _PROC_MAGIC_);
}
+extern initialize_file_ftype _initialize_mips_tdep; /* -Wmissing-prototypes */
+
void
_initialize_mips_tdep (void)
{
static struct cmd_list_element *mipsfpulist = NULL;
struct cmd_list_element *c;
- mips_abi_string = mips_abi_strings [MIPS_ABI_UNKNOWN];
+ mips_abi_string = mips_abi_strings[MIPS_ABI_UNKNOWN];
if (MIPS_ABI_LAST + 1
!= sizeof (mips_abi_strings) / sizeof (mips_abi_strings[0]))
internal_error (__FILE__, __LINE__, "mips_abi_strings out of sync");
gdbarch_register (bfd_arch_mips, mips_gdbarch_init, mips_dump_tdep);
- if (!deprecated_tm_print_insn) /* Someone may have already set it */
- deprecated_tm_print_insn = gdb_print_insn_mips;
/* Add root prefix command for all "set mips"/"show mips" commands */
add_prefix_cmd ("mips", no_class, set_mips_command,
64 - Force GDB to treat saved GP registers as 64-bit\n\
auto - Allow GDB to use the target's default setting or autodetect the\n\
saved GP register size from information contained in the executable.\n\
- (default: auto)",
- &setmipscmdlist),
- &showmipscmdlist);
+ (default: auto)", &setmipscmdlist), &showmipscmdlist);
/* Allow the user to override the argument stack size. */
add_show_from_set (add_set_enum_cmd ("stack-arg-size",
32 - Force GDB to allocate 32-bit chunks per argument\n\
64 - Force GDB to allocate 64-bit chunks per argument\n\
auto - Allow GDB to determine the correct setting from the current\n\
- target and executable (default)",
- &setmipscmdlist),
- &showmipscmdlist);
+ target and executable (default)", &setmipscmdlist), &showmipscmdlist);
/* Allow the user to override the ABI. */
c = add_set_enum_cmd
"This option can be set to one of:\n"
" auto - the default ABI associated with the current binary\n"
" o32\n"
- " o64\n"
- " n32\n"
- " n64\n"
- " eabi32\n"
- " eabi64",
- &setmipscmdlist);
+ " o64\n" " n32\n" " n64\n" " eabi32\n" " eabi64", &setmipscmdlist);
set_cmd_sfunc (c, mips_abi_update);
add_cmd ("abi", class_obscure, show_mips_abi,
- "Show ABI in use by MIPS target", &showmipscmdlist);
+ "Show ABI in use by MIPS target", &showmipscmdlist);
/* Let the user turn off floating point and set the fence post for
heuristic_proc_start. */
add_alias_cmd ("yes", "double", class_support, 1, &mipsfpulist);
add_alias_cmd ("1", "double", class_support, 1, &mipsfpulist);
add_cmd ("none", class_support, set_mipsfpu_none_command,
- "Select no MIPS floating-point coprocessor.",
- &mipsfpulist);
+ "Select no MIPS floating-point coprocessor.", &mipsfpulist);
add_alias_cmd ("off", "none", class_support, 1, &mipsfpulist);
add_alias_cmd ("no", "none", class_support, 1, &mipsfpulist);
add_alias_cmd ("0", "none", class_support, 1, &mipsfpulist);
command.c doesn't deal with that. So make it a var_zinteger
because the user can always use "999999" or some such for unlimited. */
c = add_set_cmd ("heuristic-fence-post", class_support, var_zinteger,
- (char *) &heuristic_fence_post,
- "\
+ (char *) &heuristic_fence_post, "\
Set the distance searched for the start of a function.\n\
If you are debugging a stripped executable, GDB needs to search through the\n\
program for the start of a function. This command sets the distance of the\n\
-search. The only need to set it is when debugging a stripped executable.",
- &setlist);
+search. The only need to set it is when debugging a stripped executable.", &setlist);
/* We need to throw away the frame cache when we set this, since it
might change our ability to get backtraces. */
set_cmd_sfunc (c, reinit_frame_cache_sfunc);
Use \"on\" to enable the masking, \"off\" to disable it and \"auto\" to \n\
allow GDB to determine the correct value.\n", "\
Show zeroing of upper 32 bits of 64-bit addresses.",
- NULL, show_mask_address,
- &setmipscmdlist, &showmipscmdlist);
+ NULL, show_mask_address, &setmipscmdlist, &showmipscmdlist);
/* Allow the user to control the size of 32 bit registers within the
raw remote packet. */
- add_show_from_set (add_set_cmd ("remote-mips64-transfers-32bit-regs",
- class_obscure,
- var_boolean,
- (char *)&mips64_transfers_32bit_regs_p, "\
-Set compatibility with MIPS targets that transfers 32 and 64 bit quantities.\n\
+ add_setshow_cmd ("remote-mips64-transfers-32bit-regs", class_obscure,
+ var_boolean, &mips64_transfers_32bit_regs_p, "\
+Set compatibility with 64-bit MIPS targets that transfer 32-bit quantities.\n\
+Use \"on\" to enable backward compatibility with older MIPS 64 GDB+target\n\
+that would transfer 32 bits for some registers (e.g. SR, FSR) and\n\
+64 bits for others. Use \"off\" to disable compatibility mode", "\
+Show compatibility with 64-bit MIPS targets that transfer 32-bit quantities.\n\
Use \"on\" to enable backward compatibility with older MIPS 64 GDB+target\n\
that would transfer 32 bits for some registers (e.g. SR, FSR) and\n\
-64 bits for others. Use \"off\" to disable compatibility mode",
- &setlist),
- &showlist);
+64 bits for others. Use \"off\" to disable compatibility mode", set_mips64_transfers_32bit_regs, NULL, &setlist, &showlist);
/* Debug this files internals. */
add_show_from_set (add_set_cmd ("mips", class_maintenance, var_zinteger,
&mips_debug, "Set mips debugging.\n\
-When non-zero, mips specific debugging is enabled.", &setdebuglist),
- &showdebuglist);
+When non-zero, mips specific debugging is enabled.", &setdebuglist), &showdebuglist);
}
projects / deliverable / binutils-gdb.git / blobdiff