/* Target-dependent code for the MIPS architecture, for GDB, the GNU Debugger.
Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
- 1997, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+ 1997, 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
Contributed by Alessandro Forin(af@cs.cmu.edu) at CMU
and by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin.
#include "defs.h"
#include "gdb_string.h"
+#include "gdb_assert.h"
#include "frame.h"
#include "inferior.h"
#include "symtab.h"
#include "regcache.h"
#include "osabi.h"
#include "mips-tdep.h"
-
+#include "block.h"
+#include "reggroups.h"
#include "opcode/mips.h"
#include "elf/mips.h"
#include "elf-bfd.h"
#include "symcat.h"
+#include "sim-regno.h"
+#include "dis-asm.h"
+
+static void set_reg_offset (CORE_ADDR *saved_regs, int regnum, CORE_ADDR off);
+static struct type *mips_register_type (struct gdbarch *gdbarch, int regnum);
/* A useful bit in the CP0 status register (PS_REGNUM). */
/* This bit is set if we are emulating 32-bit FPRs on a 64-bit chip. */
int mips_default_stack_argsize;
int gdb_target_is_mips64;
int default_mask_address_p;
-
- enum gdb_osabi osabi;
};
#define MIPS_EABI (gdbarch_tdep (current_gdbarch)->mips_abi == MIPS_ABI_EABI32 \
#define MIPS_SAVED_REGSIZE (mips_saved_regsize())
+/* MIPS16 function addresses are odd (bit 0 is set). Here are some
+ functions to test, set, or clear bit 0 of addresses. */
+
+static CORE_ADDR
+is_mips16_addr (CORE_ADDR addr)
+{
+ return ((addr) & 1);
+}
+
+static CORE_ADDR
+make_mips16_addr (CORE_ADDR addr)
+{
+ return ((addr) | 1);
+}
+
+static CORE_ADDR
+unmake_mips16_addr (CORE_ADDR addr)
+{
+ return ((addr) & ~1);
+}
+
+/* Return the contents of register REGNUM as a signed integer. */
+
+static LONGEST
+read_signed_register (int regnum)
+{
+ void *buf = alloca (DEPRECATED_REGISTER_RAW_SIZE (regnum));
+ deprecated_read_register_gen (regnum, buf);
+ return (extract_signed_integer (buf, DEPRECATED_REGISTER_RAW_SIZE (regnum)));
+}
+
+static LONGEST
+read_signed_register_pid (int regnum, ptid_t ptid)
+{
+ ptid_t save_ptid;
+ LONGEST retval;
+
+ if (ptid_equal (ptid, inferior_ptid))
+ return read_signed_register (regnum);
+
+ save_ptid = inferior_ptid;
+
+ inferior_ptid = ptid;
+
+ retval = read_signed_register (regnum);
+
+ inferior_ptid = save_ptid;
+
+ return retval;
+}
+
/* Return the MIPS ABI associated with GDBARCH. */
enum mips_abi
mips_abi (struct gdbarch *gdbarch)
enum bfd_endian endian, bfd_byte *in, const bfd_byte *out,
int buf_offset)
{
- bfd_byte *reg = alloca (MAX_REGISTER_RAW_SIZE);
+ bfd_byte reg[MAX_REGISTER_SIZE];
int reg_offset = 0;
+ gdb_assert (reg_num >= NUM_REGS);
/* Need to transfer the left or right part of the register, based on
the targets byte order. */
switch (endian)
{
case BFD_ENDIAN_BIG:
- reg_offset = REGISTER_RAW_SIZE (reg_num) - length;
+ reg_offset = DEPRECATED_REGISTER_RAW_SIZE (reg_num) - length;
break;
case BFD_ENDIAN_LITTLE:
reg_offset = 0;
fprintf_unfiltered (gdb_stdlog, "%02x", out[buf_offset + i]);
}
if (in != NULL)
- regcache_raw_read_part (regcache, reg_num, reg_offset, length, in + buf_offset);
+ regcache_cooked_read_part (regcache, reg_num, reg_offset, length, in + buf_offset);
if (out != NULL)
- regcache_raw_write_part (regcache, reg_num, reg_offset, length, out + buf_offset);
+ regcache_cooked_write_part (regcache, reg_num, reg_offset, length, out + buf_offset);
if (mips_debug && in != NULL)
{
int i;
{
/* MIPS1 and MIPS2 have only 32 bit FPRs, and the FR bit is not
meaningful. */
- if (REGISTER_RAW_SIZE (FP0_REGNUM) == 4)
+ if (DEPRECATED_REGISTER_RAW_SIZE (FP0_REGNUM) == 4)
return 0;
#if 0
#define VM_MIN_ADDRESS (CORE_ADDR)0x400000
-int gdb_print_insn_mips (bfd_vma, disassemble_info *);
-
-static void mips_print_register (int, int);
-
-static mips_extra_func_info_t
-heuristic_proc_desc (CORE_ADDR, CORE_ADDR, struct frame_info *, int);
+static mips_extra_func_info_t heuristic_proc_desc (CORE_ADDR, CORE_ADDR,
+ struct frame_info *, int);
static CORE_ADDR heuristic_proc_start (CORE_ADDR);
static void reinit_frame_cache_sfunc (char *, int, struct cmd_list_element *);
-static mips_extra_func_info_t
-find_proc_desc (CORE_ADDR pc, struct frame_info *next_frame, int cur_frame);
+static mips_extra_func_info_t find_proc_desc (CORE_ADDR pc,
+ struct frame_info *next_frame,
+ int cur_frame);
static CORE_ADDR after_prologue (CORE_ADDR pc,
mips_extra_func_info_t proc_desc);
-static void mips_read_fp_register_single (int regno, char *rare_buffer);
-static void mips_read_fp_register_double (int regno, char *rare_buffer);
-
static struct type *mips_float_register_type (void);
static struct type *mips_double_register_type (void);
/* A set of original names, to be used when restoring back to generic
registers from a specific set. */
+static char *mips_generic_reg_names[] = MIPS_REGISTER_NAMES;
-char *mips_generic_reg_names[] = MIPS_REGISTER_NAMES;
-char **mips_processor_reg_names = mips_generic_reg_names;
+/* Integer registers 0 thru 31 are handled explicitly by
+ mips_register_name(). Processor specific registers 32 and above
+ are listed in the sets of register names assigned to
+ mips_processor_reg_names. */
+static char **mips_processor_reg_names = mips_generic_reg_names;
+/* Return the name of the register corresponding to REGNO. */
static const char *
-mips_register_name (int i)
-{
- return mips_processor_reg_names[i];
+mips_register_name (int regno)
+{
+ /* GPR names for all ABIs other than n32/n64. */
+ static char *mips_gpr_names[] = {
+ "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
+ "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7",
+ "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
+ "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra",
+ };
+
+ /* GPR names for n32 and n64 ABIs. */
+ static char *mips_n32_n64_gpr_names[] = {
+ "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
+ "a4", "a5", "a6", "a7", "t0", "t1", "t2", "t3",
+ "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
+ "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra"
+ };
+
+ enum mips_abi abi = mips_abi (current_gdbarch);
+
+ /* Map [NUM_REGS .. 2*NUM_REGS) onto the raw registers, but then
+ don't make the raw register names visible. */
+ int rawnum = regno % NUM_REGS;
+ if (regno < NUM_REGS)
+ return "";
+
+ /* The MIPS integer registers are always mapped from 0 to 31. The
+ names of the registers (which reflects the conventions regarding
+ register use) vary depending on the ABI. */
+ if (0 <= rawnum && rawnum < 32)
+ {
+ if (abi == MIPS_ABI_N32 || abi == MIPS_ABI_N64)
+ return mips_n32_n64_gpr_names[rawnum];
+ else
+ return mips_gpr_names[rawnum];
+ }
+ else if (32 <= rawnum && rawnum < NUM_REGS)
+ return mips_processor_reg_names[rawnum - 32];
+ else
+ internal_error (__FILE__, __LINE__,
+ "mips_register_name: bad register number %d", rawnum);
}
+
/* *INDENT-OFF* */
/* Names of IDT R3041 registers. */
char *mips_r3041_reg_names[] = {
- "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
- "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7",
- "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
- "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra",
"sr", "lo", "hi", "bad", "cause","pc",
"f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
"f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
/* Names of IDT R3051 registers. */
char *mips_r3051_reg_names[] = {
- "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
- "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7",
- "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
- "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra",
"sr", "lo", "hi", "bad", "cause","pc",
"f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
"f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
/* Names of IDT R3081 registers. */
char *mips_r3081_reg_names[] = {
- "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
- "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7",
- "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
- "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra",
"sr", "lo", "hi", "bad", "cause","pc",
"f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
"f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
/* Names of LSI 33k registers. */
char *mips_lsi33k_reg_names[] = {
- "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
- "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7",
- "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
- "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra",
"epc", "hi", "lo", "sr", "cause","badvaddr",
"dcic", "bpc", "bda", "", "", "", "", "",
"", "", "", "", "", "", "", "",
};
/* *INDENT-ON* */
+/* Return the groups that a MIPS register can be categorised into. */
+
+static int
+mips_register_reggroup_p (struct gdbarch *gdbarch, int regnum,
+ struct reggroup *reggroup)
+{
+ int vector_p;
+ int float_p;
+ int raw_p;
+ int rawnum = regnum % NUM_REGS;
+ int pseudo = regnum / NUM_REGS;
+ if (reggroup == all_reggroup)
+ return pseudo;
+ vector_p = TYPE_VECTOR (register_type (gdbarch, regnum));
+ float_p = TYPE_CODE (register_type (gdbarch, regnum)) == TYPE_CODE_FLT;
+ /* FIXME: cagney/2003-04-13: Can't yet use gdbarch_num_regs
+ (gdbarch), as not all architectures are multi-arch. */
+ raw_p = rawnum < NUM_REGS;
+ if (REGISTER_NAME (regnum) == NULL
+ || REGISTER_NAME (regnum)[0] == '\0')
+ return 0;
+ if (reggroup == float_reggroup)
+ return float_p && pseudo;
+ if (reggroup == vector_reggroup)
+ return vector_p && pseudo;
+ if (reggroup == general_reggroup)
+ return (!vector_p && !float_p) && pseudo;
+ /* Save the pseudo registers. Need to make certain that any code
+ extracting register values from a saved register cache also uses
+ pseudo registers. */
+ if (reggroup == save_reggroup)
+ return raw_p && pseudo;
+ /* Restore the same pseudo register. */
+ if (reggroup == restore_reggroup)
+ return raw_p && pseudo;
+ return 0;
+}
+
+/* Map the symbol table registers which live in the range [1 *
+ NUM_REGS .. 2 * NUM_REGS) back onto the corresponding raw
+ registers. */
+static void
+mips_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache,
+ int cookednum, void *buf)
+{
+ gdb_assert (cookednum >= NUM_REGS && cookednum < 2 * NUM_REGS);
+ return regcache_raw_read (regcache, cookednum % NUM_REGS, buf);
+}
+static void
+mips_pseudo_register_write (struct gdbarch *gdbarch, struct regcache *regcache,
+ int cookednum, const void *buf)
+{
+ gdb_assert (cookednum >= NUM_REGS && cookednum < 2 * NUM_REGS);
+ return regcache_raw_write (regcache, cookednum % NUM_REGS, buf);
+}
/* Table to translate MIPS16 register field to actual register number. */
static int mips16_to_32_reg[8] =
mips_print_extra_frame_info (struct frame_info *fi)
{
if (fi
- && fi->extra_info
- && fi->extra_info->proc_desc
- && fi->extra_info->proc_desc->pdr.framereg < NUM_REGS)
+ && get_frame_extra_info (fi)
+ && get_frame_extra_info (fi)->proc_desc
+ && get_frame_extra_info (fi)->proc_desc->pdr.framereg < NUM_REGS)
printf_filtered (" frame pointer is at %s+%s\n",
- REGISTER_NAME (fi->extra_info->proc_desc->pdr.framereg),
- paddr_d (fi->extra_info->proc_desc->pdr.frameoffset));
+ REGISTER_NAME (get_frame_extra_info (fi)->proc_desc->pdr.framereg),
+ paddr_d (get_frame_extra_info (fi)->proc_desc->pdr.frameoffset));
}
/* Number of bytes of storage in the actual machine representation for
register N. NOTE: This indirectly defines the register size
- transfered by the GDB protocol. */
+ transfered by the GDB protocol. */
static int mips64_transfers_32bit_regs_p = 0;
static int
-mips_register_raw_size (int reg_nr)
+mips_register_raw_size (int regnum)
{
- if (mips64_transfers_32bit_regs_p)
- return REGISTER_VIRTUAL_SIZE (reg_nr);
- else if (reg_nr >= FP0_REGNUM && reg_nr < FP0_REGNUM + 32
- && FP_REGISTER_DOUBLE)
- /* For MIPS_ABI_N32 (for example) we need 8 byte floating point
- registers. */
- return 8;
+ gdb_assert (regnum >= 0);
+ if (regnum < NUM_REGS)
+ {
+ /* For compatibility with old code, implemnt the broken register raw
+ size map for the raw registers.
+
+ NOTE: cagney/2003-06-15: This is so bogus. The register's
+ raw size is changing according to the ABI
+ (FP_REGISTER_DOUBLE). Also, GDB's protocol is defined by a
+ combination of DEPRECATED_REGISTER_RAW_SIZE and DEPRECATED_REGISTER_BYTE. */
+ if (mips64_transfers_32bit_regs_p)
+ return DEPRECATED_REGISTER_VIRTUAL_SIZE (regnum);
+ else if (regnum >= FP0_REGNUM && regnum < FP0_REGNUM + 32
+ && FP_REGISTER_DOUBLE)
+ /* For MIPS_ABI_N32 (for example) we need 8 byte floating point
+ registers. */
+ return 8;
+ else
+ return MIPS_REGSIZE;
+ }
+ else if (regnum < 2 * NUM_REGS)
+ {
+ /* For the moment map [NUM_REGS .. 2*NUM_REGS) onto the same raw
+ registers, but always return the virtual size. */
+ int rawnum = regnum % NUM_REGS;
+ return TYPE_LENGTH (gdbarch_register_type (current_gdbarch, rawnum));
+ }
else
- return MIPS_REGSIZE;
+ internal_error (__FILE__, __LINE__, "Register %d out of range", regnum);
+}
+
+/* Register offset in a buffer for each register.
+
+ FIXME: cagney/2003-06-15: This is so bogus. Instead REGISTER_TYPE
+ should strictly return the layout of the buffer. Unfortunatly
+ remote.c and the MIPS have come to rely on a custom layout that
+ doesn't 1:1 map onto the register type. */
+
+static int
+mips_register_byte (int regnum)
+{
+ gdb_assert (regnum >= 0);
+ if (regnum < NUM_REGS)
+ /* Pick up the relevant per-tm file register byte method. */
+ return MIPS_REGISTER_BYTE (regnum);
+ else if (regnum < 2 * NUM_REGS)
+ {
+ int reg;
+ int byte;
+ /* Start with the end of the raw register buffer - assum that
+ MIPS_REGISTER_BYTE (NUM_REGS) returns that end. */
+ byte = MIPS_REGISTER_BYTE (NUM_REGS);
+ /* Add space for all the proceeding registers based on their
+ real size. */
+ for (reg = NUM_REGS; reg < regnum; reg++)
+ byte += TYPE_LENGTH (gdbarch_register_type (current_gdbarch,
+ (reg % NUM_REGS)));
+ return byte;
+ }
+ else
+ internal_error (__FILE__, __LINE__, "Register %d out of range", regnum);
}
/* Convert between RAW and VIRTUAL registers. The RAW register size
if (mips64_transfers_32bit_regs_p)
return 0;
else
- return (REGISTER_RAW_SIZE (reg_nr) > REGISTER_VIRTUAL_SIZE (reg_nr));
+ return (DEPRECATED_REGISTER_RAW_SIZE (reg_nr) > DEPRECATED_REGISTER_VIRTUAL_SIZE (reg_nr));
}
static void
{
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
memcpy (virt_buf,
- raw_buf + (REGISTER_RAW_SIZE (n) - TYPE_LENGTH (virtual_type)),
+ raw_buf + (DEPRECATED_REGISTER_RAW_SIZE (n) - TYPE_LENGTH (virtual_type)),
TYPE_LENGTH (virtual_type));
else
memcpy (virt_buf,
static void
mips_register_convert_to_raw (struct type *virtual_type, int n,
- char *virt_buf, char *raw_buf)
+ const char *virt_buf, char *raw_buf)
{
- memset (raw_buf, 0, REGISTER_RAW_SIZE (n));
+ memset (raw_buf, 0, DEPRECATED_REGISTER_RAW_SIZE (n));
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- memcpy (raw_buf + (REGISTER_RAW_SIZE (n) - TYPE_LENGTH (virtual_type)),
+ memcpy (raw_buf + (DEPRECATED_REGISTER_RAW_SIZE (n) - TYPE_LENGTH (virtual_type)),
virt_buf,
TYPE_LENGTH (virtual_type));
else
TYPE_LENGTH (virtual_type));
}
-void
-mips_register_convert_to_type (int regnum, struct type *type, char *buffer)
+static int
+mips_convert_register_p (int regnum, struct type *type)
{
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && REGISTER_RAW_SIZE (regnum) == 4
- && (regnum) >= FP0_REGNUM && (regnum) < FP0_REGNUM + 32
- && TYPE_CODE(type) == TYPE_CODE_FLT
- && TYPE_LENGTH(type) == 8)
- {
- char temp[4];
- memcpy (temp, ((char *)(buffer))+4, 4);
- memcpy (((char *)(buffer))+4, (buffer), 4);
- memcpy (((char *)(buffer)), temp, 4);
- }
+ return (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && DEPRECATED_REGISTER_RAW_SIZE (regnum) == 4
+ && (regnum) >= FP0_REGNUM && (regnum) < FP0_REGNUM + 32
+ && TYPE_CODE(type) == TYPE_CODE_FLT
+ && TYPE_LENGTH(type) == 8);
}
-void
-mips_register_convert_from_type (int regnum, struct type *type, char *buffer)
+static void
+mips_register_to_value (struct frame_info *frame, int regnum,
+ struct type *type, void *to)
{
-if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && REGISTER_RAW_SIZE (regnum) == 4
- && (regnum) >= FP0_REGNUM && (regnum) < FP0_REGNUM + 32
- && TYPE_CODE(type) == TYPE_CODE_FLT
- && TYPE_LENGTH(type) == 8)
- {
- char temp[4];
- memcpy (temp, ((char *)(buffer))+4, 4);
- memcpy (((char *)(buffer))+4, (buffer), 4);
- memcpy (((char *)(buffer)), temp, 4);
- }
+ get_frame_register (frame, regnum + 0, (char *) to + 4);
+ get_frame_register (frame, regnum + 1, (char *) to + 0);
}
-/* Return the GDB type object for the "standard" data type
- of data in register REG.
-
- Note: kevinb/2002-08-01: The definition below should faithfully
- reproduce the behavior of each of the REGISTER_VIRTUAL_TYPE
- definitions found in config/mips/tm-*.h. I'm concerned about
- the ``FCRCS_REGNUM <= reg && reg <= LAST_EMBED_REGNUM'' clause
- though. In some cases FP_REGNUM is in this range, and I doubt
- that this code is correct for the 64-bit case. */
+static void
+mips_value_to_register (struct frame_info *frame, int regnum,
+ struct type *type, const void *from)
+{
+ put_frame_register (frame, regnum + 0, (const char *) from + 4);
+ put_frame_register (frame, regnum + 1, (const char *) from + 0);
+}
+
+/* Return the GDB type object for the "standard" data type of data in
+ register REG. */
static struct type *
-mips_register_virtual_type (int reg)
-{
- if (FP0_REGNUM <= reg && reg < FP0_REGNUM + 32)
+mips_register_type (struct gdbarch *gdbarch, int regnum)
+{
+ /* For moment, map [NUM_REGS .. 2*NUM_REGS) onto the same raw
+ registers. Even return the same type. */
+ int rawnum = regnum % NUM_REGS;
+ gdb_assert (rawnum >= 0 && rawnum < NUM_REGS);
+#ifdef MIPS_REGISTER_TYPE
+ return MIPS_REGISTER_TYPE (rawnum);
+#else
+ if (FP0_REGNUM <= rawnum && rawnum < FP0_REGNUM + 32)
{
/* Floating point registers... */
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
else
return builtin_type_ieee_double_little;
}
- else if (reg == PS_REGNUM /* CR */)
+ else if (rawnum == PS_REGNUM /* CR */)
return builtin_type_uint32;
- else if (FCRCS_REGNUM <= reg && reg <= LAST_EMBED_REGNUM)
+ else if (FCRCS_REGNUM <= rawnum && rawnum <= LAST_EMBED_REGNUM)
return builtin_type_uint32;
else
{
else
return builtin_type_uint32;
}
+#endif
}
/* TARGET_READ_SP -- Remove useless bits from the stack pointer. */
static CORE_ADDR
mips_read_sp (void)
{
- return ADDR_BITS_REMOVE (read_register (SP_REGNUM));
+ return read_signed_register (SP_REGNUM);
}
/* Should the upper word of 64-bit addresses be zeroed? */
return (TYPE_LENGTH (type) > 2 * MIPS_SAVED_REGSIZE);
}
-static int
-mips_o32_use_struct_convention (int gcc_p, struct type *type)
-{
- return 1; /* Structures are returned by ref in extra arg0. */
-}
-
/* Should call_function pass struct by reference?
For each architecture, structs are passed either by
value or by reference, depending on their size. */
struct minimal_symbol *sym;
/* If bit 0 of the address is set, assume this is a MIPS16 address. */
- if (IS_MIPS16_ADDR (memaddr))
+ if (is_mips16_addr (memaddr))
return 1;
/* A flag indicating that this is a MIPS16 function is stored by elfread.c in
if (pc_is_mips16 (addr))
{
instlen = MIPS16_INSTLEN;
- addr = UNMAKE_MIPS16_ADDR (addr);
+ addr = unmake_mips16_addr (addr);
}
else
instlen = MIPS_INSTLEN;
return mips32_next_pc (pc);
}
-/* Guaranteed to set fci->saved_regs to some values (it never leaves it
- NULL).
-
- Note: kevinb/2002-08-09: The only caller of this function is (and
- should remain) mips_frame_init_saved_regs(). In fact,
- aside from calling mips_find_saved_regs(), mips_frame_init_saved_regs()
- does nothing more than set frame->saved_regs[SP_REGNUM]. These two
- functions should really be combined and now that there is only one
- caller, it should be straightforward. (Watch out for multiple returns
- though.) */
+/* Set up the 'saved_regs' array. This is a data structure containing
+ the addresses on the stack where each register has been saved, for
+ each stack frame. Registers that have not been saved will have
+ zero here. The stack pointer register is special: rather than the
+ address where the stack register has been saved,
+ saved_regs[SP_REGNUM] will have the actual value of the previous
+ frame's stack register. */
static void
mips_find_saved_regs (struct frame_info *fci)
{
int ireg;
- CORE_ADDR reg_position;
/* r0 bit means kernel trap */
int kernel_trap;
/* What registers have been saved? Bitmasks. */
unsigned long gen_mask, float_mask;
mips_extra_func_info_t proc_desc;
t_inst inst;
+ CORE_ADDR *saved_regs;
- frame_saved_regs_zalloc (fci);
+ if (deprecated_get_frame_saved_regs (fci) != NULL)
+ return;
+ saved_regs = frame_saved_regs_zalloc (fci);
/* If it is the frame for sigtramp, the saved registers are located
- in a sigcontext structure somewhere on the stack.
- If the stack layout for sigtramp changes we might have to change these
- constants and the companion fixup_sigtramp in mdebugread.c */
+ in a sigcontext structure somewhere on the stack. If the stack
+ layout for sigtramp changes we might have to change these
+ constants and the companion fixup_sigtramp in mdebugread.c */
#ifndef SIGFRAME_BASE
-/* To satisfy alignment restrictions, sigcontext is located 4 bytes
- above the sigtramp frame. */
+ /* To satisfy alignment restrictions, sigcontext is located 4 bytes
+ above the sigtramp frame. */
#define SIGFRAME_BASE MIPS_REGSIZE
/* FIXME! Are these correct?? */
#define SIGFRAME_PC_OFF (SIGFRAME_BASE + 2 * MIPS_REGSIZE)
(SIGFRAME_REGSAVE_OFF + MIPS_NUMREGS * MIPS_REGSIZE + 3 * MIPS_REGSIZE)
#endif
#ifndef SIGFRAME_REG_SIZE
-/* FIXME! Is this correct?? */
+ /* FIXME! Is this correct?? */
#define SIGFRAME_REG_SIZE MIPS_REGSIZE
#endif
if ((get_frame_type (fci) == SIGTRAMP_FRAME))
{
for (ireg = 0; ireg < MIPS_NUMREGS; ireg++)
{
- reg_position = fci->frame + SIGFRAME_REGSAVE_OFF
- + ireg * SIGFRAME_REG_SIZE;
- fci->saved_regs[ireg] = reg_position;
+ CORE_ADDR reg_position = (get_frame_base (fci) + SIGFRAME_REGSAVE_OFF
+ + ireg * SIGFRAME_REG_SIZE);
+ set_reg_offset (saved_regs, ireg, reg_position);
}
for (ireg = 0; ireg < MIPS_NUMREGS; ireg++)
{
- reg_position = fci->frame + SIGFRAME_FPREGSAVE_OFF
- + ireg * SIGFRAME_REG_SIZE;
- fci->saved_regs[FP0_REGNUM + ireg] = reg_position;
+ CORE_ADDR reg_position = (get_frame_base (fci)
+ + SIGFRAME_FPREGSAVE_OFF
+ + ireg * SIGFRAME_REG_SIZE);
+ set_reg_offset (saved_regs, FP0_REGNUM + ireg, reg_position);
}
- fci->saved_regs[PC_REGNUM] = fci->frame + SIGFRAME_PC_OFF;
+
+ set_reg_offset (saved_regs, PC_REGNUM, get_frame_base (fci) + SIGFRAME_PC_OFF);
+ /* SP_REGNUM, contains the value and not the address. */
+ set_reg_offset (saved_regs, SP_REGNUM, get_frame_base (fci));
return;
}
- proc_desc = fci->extra_info->proc_desc;
+ proc_desc = get_frame_extra_info (fci)->proc_desc;
if (proc_desc == NULL)
- /* I'm not sure how/whether this can happen. Normally when we can't
- find a proc_desc, we "synthesize" one using heuristic_proc_desc
- and set the saved_regs right away. */
+ /* I'm not sure how/whether this can happen. Normally when we
+ can't find a proc_desc, we "synthesize" one using
+ heuristic_proc_desc and set the saved_regs right away. */
return;
kernel_trap = PROC_REG_MASK (proc_desc) & 1;
gen_mask = kernel_trap ? 0xFFFFFFFF : PROC_REG_MASK (proc_desc);
float_mask = kernel_trap ? 0xFFFFFFFF : PROC_FREG_MASK (proc_desc);
- if ( /* In any frame other than the innermost or a frame interrupted by
- a signal, we assume that all registers have been saved.
- This assumes that all register saves in a function happen before
- the first function call. */
- (fci->next == NULL || (get_frame_type (fci->next) == SIGTRAMP_FRAME))
+ if (/* In any frame other than the innermost or a frame interrupted
+ by a signal, we assume that all registers have been saved.
+ This assumes that all register saves in a function happen
+ before the first function call. */
+ (get_next_frame (fci) == NULL
+ || (get_frame_type (get_next_frame (fci)) == SIGTRAMP_FRAME))
- /* In a dummy frame we know exactly where things are saved. */
+ /* In a dummy frame we know exactly where things are saved. */
&& !PROC_DESC_IS_DUMMY (proc_desc)
- /* Don't bother unless we are inside a function prologue. Outside the
- prologue, we know where everything is. */
+ /* Don't bother unless we are inside a function prologue.
+ Outside the prologue, we know where everything is. */
- && in_prologue (fci->pc, PROC_LOW_ADDR (proc_desc))
+ && in_prologue (get_frame_pc (fci), PROC_LOW_ADDR (proc_desc))
- /* Not sure exactly what kernel_trap means, but if it means
- the kernel saves the registers without a prologue doing it,
- we better not examine the prologue to see whether registers
- have been saved yet. */
+ /* Not sure exactly what kernel_trap means, but if it means the
+ kernel saves the registers without a prologue doing it, we
+ better not examine the prologue to see whether registers
+ have been saved yet. */
&& !kernel_trap)
{
- /* We need to figure out whether the registers that the proc_desc
- claims are saved have been saved yet. */
+ /* We need to figure out whether the registers that the
+ proc_desc claims are saved have been saved yet. */
CORE_ADDR addr;
addr = PROC_LOW_ADDR (proc_desc);
instlen = pc_is_mips16 (addr) ? MIPS16_INSTLEN : MIPS_INSTLEN;
- /* Scan through this function's instructions preceding the current
- PC, and look for those that save registers. */
- while (addr < fci->pc)
+ /* Scan through this function's instructions preceding the
+ current PC, and look for those that save registers. */
+ while (addr < get_frame_pc (fci))
{
inst = mips_fetch_instruction (addr);
if (pc_is_mips16 (addr))
float_mask = float_save_found;
}
- /* Fill in the offsets for the registers which gen_mask says
- were saved. */
- reg_position = fci->frame + PROC_REG_OFFSET (proc_desc);
- for (ireg = MIPS_NUMREGS - 1; gen_mask; --ireg, gen_mask <<= 1)
- if (gen_mask & 0x80000000)
- {
- fci->saved_regs[ireg] = reg_position;
- reg_position -= MIPS_SAVED_REGSIZE;
- }
+ /* Fill in the offsets for the registers which gen_mask says were
+ saved. */
+ {
+ CORE_ADDR reg_position = (get_frame_base (fci)
+ + PROC_REG_OFFSET (proc_desc));
+ for (ireg = MIPS_NUMREGS - 1; gen_mask; --ireg, gen_mask <<= 1)
+ if (gen_mask & 0x80000000)
+ {
+ set_reg_offset (saved_regs, ireg, reg_position);
+ reg_position -= MIPS_SAVED_REGSIZE;
+ }
+ }
- /* The MIPS16 entry instruction saves $s0 and $s1 in the reverse order
- of that normally used by gcc. Therefore, we have to fetch the first
- instruction of the function, and if it's an entry instruction that
- saves $s0 or $s1, correct their saved addresses. */
+ /* The MIPS16 entry instruction saves $s0 and $s1 in the reverse
+ order of that normally used by gcc. Therefore, we have to fetch
+ the first instruction of the function, and if it's an entry
+ instruction that saves $s0 or $s1, correct their saved addresses. */
if (pc_is_mips16 (PROC_LOW_ADDR (proc_desc)))
{
inst = mips_fetch_instruction (PROC_LOW_ADDR (proc_desc));
- if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
+ if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700)
+ /* entry */
{
int reg;
int sreg_count = (inst >> 6) & 3;
/* Check if the ra register was pushed on the stack. */
- reg_position = fci->frame + PROC_REG_OFFSET (proc_desc);
+ CORE_ADDR reg_position = (get_frame_base (fci)
+ + PROC_REG_OFFSET (proc_desc));
if (inst & 0x20)
reg_position -= MIPS_SAVED_REGSIZE;
- /* Check if the s0 and s1 registers were pushed on the stack. */
+ /* Check if the s0 and s1 registers were pushed on the
+ stack. */
for (reg = 16; reg < sreg_count + 16; reg++)
{
- fci->saved_regs[reg] = reg_position;
+ set_reg_offset (saved_regs, reg, reg_position);
reg_position -= MIPS_SAVED_REGSIZE;
}
}
}
- /* Fill in the offsets for the registers which float_mask says
- were saved. */
- reg_position = fci->frame + PROC_FREG_OFFSET (proc_desc);
-
- /* Apparently, the freg_offset gives the offset to the first 64 bit
- saved.
-
- When the ABI specifies 64 bit saved registers, the FREG_OFFSET
- designates the first saved 64 bit register.
-
- When the ABI specifies 32 bit saved registers, the ``64 bit saved
- DOUBLE'' consists of two adjacent 32 bit registers, Hence
- FREG_OFFSET, designates the address of the lower register of the
- register pair. Adjust the offset so that it designates the upper
- register of the pair -- i.e., the address of the first saved 32
- bit register. */
-
- if (MIPS_SAVED_REGSIZE == 4)
- reg_position += MIPS_SAVED_REGSIZE;
-
- /* Fill in the offsets for the float registers which float_mask says
- were saved. */
- for (ireg = MIPS_NUMREGS - 1; float_mask; --ireg, float_mask <<= 1)
- if (float_mask & 0x80000000)
- {
- fci->saved_regs[FP0_REGNUM + ireg] = reg_position;
- reg_position -= MIPS_SAVED_REGSIZE;
- }
+ /* Fill in the offsets for the registers which float_mask says were
+ saved. */
+ {
+ CORE_ADDR reg_position = (get_frame_base (fci)
+ + PROC_FREG_OFFSET (proc_desc));
- fci->saved_regs[PC_REGNUM] = fci->saved_regs[RA_REGNUM];
-}
+ /* Fill in the offsets for the float registers which float_mask
+ says were saved. */
+ for (ireg = MIPS_NUMREGS - 1; float_mask; --ireg, float_mask <<= 1)
+ if (float_mask & 0x80000000)
+ {
+ if (MIPS_SAVED_REGSIZE == 4 && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ /* On a big endian 32 bit ABI, floating point registers
+ are paired to form doubles such that the most
+ significant part is in $f[N+1] and the least
+ significant in $f[N] vis: $f[N+1] ||| $f[N]. The
+ registers are also spilled as a pair and stored as a
+ double.
+
+ When little-endian the least significant part is
+ stored first leading to the memory order $f[N] and
+ then $f[N+1].
+
+ Unfortunatly, when big-endian the most significant
+ part of the double is stored first, and the least
+ significant is stored second. This leads to the
+ registers being ordered in memory as firt $f[N+1] and
+ then $f[N].
+
+ For the big-endian case make certain that the
+ addresses point at the correct (swapped) locations
+ $f[N] and $f[N+1] pair (keep in mind that
+ reg_position is decremented each time through the
+ loop). */
+ if ((ireg & 1))
+ set_reg_offset (saved_regs, FP0_REGNUM + ireg,
+ reg_position - MIPS_SAVED_REGSIZE);
+ else
+ set_reg_offset (saved_regs, FP0_REGNUM + ireg,
+ reg_position + MIPS_SAVED_REGSIZE);
+ }
+ else
+ set_reg_offset (saved_regs, FP0_REGNUM + ireg, reg_position);
+ reg_position -= MIPS_SAVED_REGSIZE;
+ }
-/* Set up the 'saved_regs' array. This is a data structure containing
- the addresses on the stack where each register has been saved, for
- each stack frame. Registers that have not been saved will have
- zero here. The stack pointer register is special: rather than the
- address where the stack register has been saved, saved_regs[SP_REGNUM]
- will have the actual value of the previous frame's stack register. */
+ set_reg_offset (saved_regs, PC_REGNUM, saved_regs[RA_REGNUM]);
+ }
-static void
-mips_frame_init_saved_regs (struct frame_info *frame)
-{
- if (frame->saved_regs == NULL)
- {
- mips_find_saved_regs (frame);
- }
- frame->saved_regs[SP_REGNUM] = frame->frame;
+ /* SP_REGNUM, contains the value and not the address. */
+ set_reg_offset (saved_regs, SP_REGNUM, get_frame_base (fci));
}
static CORE_ADDR
read_next_frame_reg (struct frame_info *fi, int regno)
{
- int optimized;
- CORE_ADDR addr;
- int realnum;
- enum lval_type lval;
- void *raw_buffer = alloca (MAX_REGISTER_RAW_SIZE);
- frame_register_unwind (fi, regno, &optimized, &lval, &addr, &realnum,
- raw_buffer);
- /* FIXME: cagney/2002-09-13: This is just soooo bad. The MIPS
- should have a pseudo register range that correspons to the ABI's,
- rather than the ISA's, view of registers. These registers would
- then implicitly describe their size and hence could be used
- without the below munging. */
- if (lval == lval_memory)
+ /* Always a pseudo. */
+ gdb_assert (regno >= NUM_REGS);
+ if (fi == NULL)
{
- if (regno < 32)
- {
- /* Only MIPS_SAVED_REGSIZE bytes of GP registers are
- saved. */
- return read_memory_integer (addr, MIPS_SAVED_REGSIZE);
- }
+ LONGEST val;
+ regcache_cooked_read_signed (current_regcache, regno, &val);
+ return val;
}
+ else if ((regno % NUM_REGS) == SP_REGNUM)
+ /* The SP_REGNUM is special, its value is stored in saved_regs.
+ In fact, it is so special that it can even only be fetched
+ using a raw register number! Once this code as been converted
+ to frame-unwind the problem goes away. */
+ return frame_unwind_register_signed (fi, regno % NUM_REGS);
+ else
+ return frame_unwind_register_signed (fi, regno);
- return extract_signed_integer (raw_buffer, REGISTER_VIRTUAL_SIZE (regno));
}
/* mips_addr_bits_remove - remove useless address bits */
{
CORE_ADDR pc, tmp;
- pc = ((fromleaf) ? SAVED_PC_AFTER_CALL (prev->next) :
- prev->next ? FRAME_SAVED_PC (prev->next) : read_pc ());
+ pc = ((fromleaf)
+ ? DEPRECATED_SAVED_PC_AFTER_CALL (get_next_frame (prev))
+ : get_next_frame (prev)
+ ? DEPRECATED_FRAME_SAVED_PC (get_next_frame (prev))
+ : read_pc ());
tmp = SKIP_TRAMPOLINE_CODE (pc);
return tmp ? tmp : pc;
}
mips_frame_saved_pc (struct frame_info *frame)
{
CORE_ADDR saved_pc;
- mips_extra_func_info_t proc_desc = frame->extra_info->proc_desc;
- /* We have to get the saved pc from the sigcontext
- if it is a signal handler frame. */
- int pcreg = (get_frame_type (frame) == SIGTRAMP_FRAME) ? PC_REGNUM
- : (proc_desc ? PROC_PC_REG (proc_desc) : RA_REGNUM);
- if (DEPRECATED_PC_IN_CALL_DUMMY (frame->pc, 0, 0))
+ if (DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (frame), 0, 0))
{
LONGEST tmp;
- frame_unwind_signed_register (frame, PC_REGNUM, &tmp);
+ /* Always unwind the cooked PC register value. */
+ frame_unwind_signed_register (frame, NUM_REGS + PC_REGNUM, &tmp);
saved_pc = tmp;
}
- else if (proc_desc && PROC_DESC_IS_DUMMY (proc_desc))
- saved_pc = read_memory_integer (frame->frame - MIPS_SAVED_REGSIZE, MIPS_SAVED_REGSIZE);
else
- saved_pc = read_next_frame_reg (frame, pcreg);
-
+ {
+ mips_extra_func_info_t proc_desc
+ = get_frame_extra_info (frame)->proc_desc;
+ if (proc_desc && PROC_DESC_IS_DUMMY (proc_desc))
+ saved_pc = read_memory_integer (get_frame_base (frame) - MIPS_SAVED_REGSIZE, MIPS_SAVED_REGSIZE);
+ else
+ {
+ /* We have to get the saved pc from the sigcontext if it is
+ a signal handler frame. */
+ int pcreg = (get_frame_type (frame) == SIGTRAMP_FRAME ? PC_REGNUM
+ : proc_desc ? PROC_PC_REG (proc_desc) : RA_REGNUM);
+ saved_pc = read_next_frame_reg (frame, NUM_REGS + pcreg);
+ }
+ }
return ADDR_BITS_REMOVE (saved_pc);
}
frames. */
static CORE_ADDR *temp_saved_regs;
-/* Set a register's saved stack address in temp_saved_regs. If an address
- has already been set for this register, do nothing; this way we will
- only recognize the first save of a given register in a function prologue.
- This is a helper function for mips{16,32}_heuristic_proc_desc. */
+/* Set a register's saved stack address in temp_saved_regs. If an
+ address has already been set for this register, do nothing; this
+ way we will only recognize the first save of a given register in a
+ function prologue.
+
+ For simplicity, save the address in both [0 .. NUM_REGS) and
+ [NUM_REGS .. 2*NUM_REGS). Strictly speaking, only the second range
+ is used as it is only second range (the ABI instead of ISA
+ registers) that comes into play when finding saved registers in a
+ frame. */
static void
-set_reg_offset (int regno, CORE_ADDR offset)
+set_reg_offset (CORE_ADDR *saved_regs, int regno, CORE_ADDR offset)
{
- if (temp_saved_regs[regno] == 0)
- temp_saved_regs[regno] = offset;
+ if (saved_regs[regno] == 0)
+ {
+ saved_regs[regno + 0 * NUM_REGS] = offset;
+ saved_regs[regno + 1 * NUM_REGS] = offset;
+ }
}
if (start_pc < fence)
{
/* It's not clear to me why we reach this point when
- stop_soon_quietly, but with this test, at least we
+ stop_soon, but with this test, at least we
don't print out warnings for every child forked (eg, on
decstation). 22apr93 rich@cygnus.com. */
- if (!stop_soon_quietly)
+ if (stop_soon == NO_STOP_QUIETLY)
{
static int blurb_printed = 0;
offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
reg = mips16_to_32_reg[(inst & 0x700) >> 8];
PROC_REG_MASK (&temp_proc_desc) |= (1 << reg);
- set_reg_offset (reg, sp + offset);
+ set_reg_offset (temp_saved_regs, reg, sp + offset);
}
else if ((inst & 0xff00) == 0xf900) /* sd reg,n($sp) */
{
offset = mips16_get_imm (prev_inst, inst, 5, 8, 0);
reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
PROC_REG_MASK (&temp_proc_desc) |= (1 << reg);
- set_reg_offset (reg, sp + offset);
+ set_reg_offset (temp_saved_regs, reg, sp + offset);
}
else if ((inst & 0xff00) == 0x6200) /* sw $ra,n($sp) */
{
offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
PROC_REG_MASK (&temp_proc_desc) |= (1 << RA_REGNUM);
- set_reg_offset (RA_REGNUM, sp + offset);
+ set_reg_offset (temp_saved_regs, RA_REGNUM, sp + offset);
}
else if ((inst & 0xff00) == 0xfa00) /* sd $ra,n($sp) */
{
offset = mips16_get_imm (prev_inst, inst, 8, 8, 0);
PROC_REG_MASK (&temp_proc_desc) |= (1 << RA_REGNUM);
- set_reg_offset (RA_REGNUM, sp + offset);
+ set_reg_offset (temp_saved_regs, RA_REGNUM, sp + offset);
}
else if (inst == 0x673d) /* move $s1, $sp */
{
offset = mips16_get_imm (prev_inst, inst, 5, 4, 0);
reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (reg, frame_addr + offset);
+ set_reg_offset (temp_saved_regs, reg, frame_addr + offset);
}
else if ((inst & 0xFF00) == 0x7900) /* sd reg,offset($s1) */
{
offset = mips16_get_imm (prev_inst, inst, 5, 8, 0);
reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (reg, frame_addr + offset);
+ set_reg_offset (temp_saved_regs, reg, frame_addr + offset);
}
else if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
entry_inst = inst; /* save for later processing */
for (reg = 4, offset = 0; reg < areg_count + 4; reg++)
{
PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (reg, sp + offset);
+ set_reg_offset (temp_saved_regs, reg, sp + offset);
offset += MIPS_SAVED_REGSIZE;
}
if (entry_inst & 0x20)
{
PROC_REG_MASK (&temp_proc_desc) |= 1 << RA_REGNUM;
- set_reg_offset (RA_REGNUM, sp + offset);
+ set_reg_offset (temp_saved_regs, RA_REGNUM, sp + offset);
offset -= MIPS_SAVED_REGSIZE;
}
for (reg = 16; reg < sreg_count + 16; reg++)
{
PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (reg, sp + offset);
+ set_reg_offset (temp_saved_regs, reg, sp + offset);
offset -= MIPS_SAVED_REGSIZE;
}
}
else if ((high_word & 0xFFE0) == 0xafa0) /* sw reg,offset($sp) */
{
PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (reg, sp + low_word);
+ set_reg_offset (temp_saved_regs, reg, sp + low_word);
}
else if ((high_word & 0xFFE0) == 0xffa0) /* sd reg,offset($sp) */
{
but the register size used is only 32 bits. Make the address
for the saved register point to the lower 32 bits. */
PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (reg, sp + low_word + 8 - MIPS_REGSIZE);
+ set_reg_offset (temp_saved_regs, reg, sp + low_word + 8 - MIPS_REGSIZE);
}
else if (high_word == 0x27be) /* addiu $30,$sp,size */
{
{
unsigned alloca_adjust;
PROC_FRAME_REG (&temp_proc_desc) = 30;
- frame_addr = read_next_frame_reg (next_frame, 30);
+ frame_addr = read_next_frame_reg (next_frame, NUM_REGS + 30);
alloca_adjust = (unsigned) (frame_addr - (sp + low_word));
if (alloca_adjust > 0)
{
{
unsigned alloca_adjust;
PROC_FRAME_REG (&temp_proc_desc) = 30;
- frame_addr = read_next_frame_reg (next_frame, 30);
+ frame_addr = read_next_frame_reg (next_frame, NUM_REGS + 30);
alloca_adjust = (unsigned) (frame_addr - sp);
if (alloca_adjust > 0)
{
else if ((high_word & 0xFFE0) == 0xafc0) /* sw reg,offset($30) */
{
PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (reg, frame_addr + low_word);
+ set_reg_offset (temp_saved_regs, reg, frame_addr + low_word);
}
}
}
CORE_ADDR sp;
if (cur_frame)
- sp = read_next_frame_reg (next_frame, SP_REGNUM);
+ sp = read_next_frame_reg (next_frame, NUM_REGS + SP_REGNUM);
else
sp = 0;
return NULL;
}
- sym = lookup_symbol (MIPS_EFI_SYMBOL_NAME, b, LABEL_NAMESPACE, 0, NULL);
+ sym = lookup_symbol (MIPS_EFI_SYMBOL_NAME, b, LABEL_DOMAIN, 0, NULL);
/* If we never found a PDR for this function in symbol reading, then
examine prologues to find the information. */
to have their own proc_descs, and even if they don't,
heuristic_proc_desc knows how to create them! */
- register struct linked_proc_info *link;
+ struct linked_proc_info *link;
for (link = linked_proc_desc_table; link; link = link->next)
if (PROC_LOW_ADDR (&link->info) <= pc
get_frame_pointer (struct frame_info *frame,
mips_extra_func_info_t proc_desc)
{
- return ADDR_BITS_REMOVE (read_next_frame_reg (frame,
- PROC_FRAME_REG (proc_desc)) +
- PROC_FRAME_OFFSET (proc_desc) -
- PROC_FRAME_ADJUST (proc_desc));
+ return (read_next_frame_reg (frame, NUM_REGS + PROC_FRAME_REG (proc_desc))
+ + PROC_FRAME_OFFSET (proc_desc)
+ - PROC_FRAME_ADJUST (proc_desc));
}
static mips_extra_func_info_t cached_proc_desc;
{
mips_extra_func_info_t proc_desc;
CORE_ADDR tmp;
- CORE_ADDR saved_pc = FRAME_SAVED_PC (frame);
+ CORE_ADDR saved_pc = DEPRECATED_FRAME_SAVED_PC (frame);
- if (saved_pc == 0 || inside_entry_file (saved_pc))
+ if (saved_pc == 0 || deprecated_inside_entry_file (saved_pc))
return 0;
/* Check if the PC is inside a call stub. If it is, fetch the
/* A dummy frame, uses SP not FP. Get the old SP value. If all
is well, frame->frame the bottom of the current frame will
contain that value. */
- return frame->frame;
+ return get_frame_base (frame);
}
/* Look up the procedure descriptor for this PC. */
&& !(get_frame_type (frame) == SIGTRAMP_FRAME)
/* For a generic dummy frame, let get_frame_pointer() unwind a
register value saved as part of the dummy frame call. */
- && !(DEPRECATED_PC_IN_CALL_DUMMY (frame->pc, 0, 0)))
+ && !(DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (frame), 0, 0)))
return 0;
else
return get_frame_pointer (frame, proc_desc);
mips_init_extra_frame_info (int fromleaf, struct frame_info *fci)
{
int regnum;
+ mips_extra_func_info_t proc_desc;
- /* Use proc_desc calculated in frame_chain */
- mips_extra_func_info_t proc_desc =
- fci->next ? cached_proc_desc : find_proc_desc (fci->pc, fci->next, 1);
-
- fci->extra_info = (struct frame_extra_info *)
- frame_obstack_alloc (sizeof (struct frame_extra_info));
+ if (get_frame_type (fci) == DUMMY_FRAME)
+ return;
- fci->saved_regs = NULL;
- fci->extra_info->proc_desc =
+ /* Use proc_desc calculated in frame_chain. When there is no
+ next frame, i.e, get_next_frame (fci) == NULL, we call
+ find_proc_desc () to calculate it, passing an explicit
+ NULL as the frame parameter. */
+ proc_desc =
+ get_next_frame (fci)
+ ? cached_proc_desc
+ : find_proc_desc (get_frame_pc (fci),
+ NULL /* i.e, get_next_frame (fci) */,
+ 1);
+
+ frame_extra_info_zalloc (fci, sizeof (struct frame_extra_info));
+
+ deprecated_set_frame_saved_regs_hack (fci, NULL);
+ get_frame_extra_info (fci)->proc_desc =
proc_desc == &temp_proc_desc ? 0 : proc_desc;
if (proc_desc)
{
/* This may not be quite right, if proc has a real frame register.
Get the value of the frame relative sp, procedure might have been
interrupted by a signal at it's very start. */
- if (fci->pc == PROC_LOW_ADDR (proc_desc)
+ if (get_frame_pc (fci) == PROC_LOW_ADDR (proc_desc)
&& !PROC_DESC_IS_DUMMY (proc_desc))
- fci->frame = read_next_frame_reg (fci->next, SP_REGNUM);
- else if (DEPRECATED_PC_IN_CALL_DUMMY (fci->pc, 0, 0))
+ deprecated_update_frame_base_hack (fci, read_next_frame_reg (get_next_frame (fci), NUM_REGS + SP_REGNUM));
+ else if (DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (fci), 0, 0))
/* Do not ``fix'' fci->frame. It will have the value of the
generic dummy frame's top-of-stack (since the draft
fci->frame is obtained by returning the unwound stack
part of the dummy frames data. */
/* Do nothing. */;
else
- fci->frame = get_frame_pointer (fci->next, proc_desc);
+ deprecated_update_frame_base_hack (fci, get_frame_pointer (get_next_frame (fci), proc_desc));
if (proc_desc == &temp_proc_desc)
{
/* FIXME: cagney/2002-11-18: This problem will go away once
frame.c:get_prev_frame() is modified to set the frame's
type before calling functions like this. */
- find_pc_partial_function (fci->pc, &name,
+ find_pc_partial_function (get_frame_pc (fci), &name,
(CORE_ADDR *) NULL, (CORE_ADDR *) NULL);
- if (!PC_IN_SIGTRAMP (fci->pc, name))
+ if (!PC_IN_SIGTRAMP (get_frame_pc (fci), name))
{
frame_saved_regs_zalloc (fci);
- memcpy (fci->saved_regs, temp_saved_regs, SIZEOF_FRAME_SAVED_REGS);
- fci->saved_regs[PC_REGNUM]
- = fci->saved_regs[RA_REGNUM];
- /* Set value of previous frame's stack pointer. Remember that
- saved_regs[SP_REGNUM] is special in that it contains the
- value of the stack pointer register. The other saved_regs
- values are addresses (in the inferior) at which a given
- register's value may be found. */
- fci->saved_regs[SP_REGNUM] = fci->frame;
+ /* Set value of previous frame's stack pointer.
+ Remember that saved_regs[SP_REGNUM] is special in
+ that it contains the value of the stack pointer
+ register. The other saved_regs values are addresses
+ (in the inferior) at which a given register's value
+ may be found. */
+ set_reg_offset (temp_saved_regs, SP_REGNUM,
+ get_frame_base (fci));
+ set_reg_offset (temp_saved_regs, PC_REGNUM,
+ temp_saved_regs[RA_REGNUM]);
+ memcpy (deprecated_get_frame_saved_regs (fci), temp_saved_regs,
+ SIZEOF_FRAME_SAVED_REGS);
}
}
/* hack: if argument regs are saved, guess these contain args */
/* assume we can't tell how many args for now */
- fci->extra_info->num_args = -1;
+ get_frame_extra_info (fci)->num_args = -1;
for (regnum = MIPS_LAST_ARG_REGNUM; regnum >= A0_REGNUM; regnum--)
{
if (PROC_REG_MASK (proc_desc) & (1 << regnum))
{
- fci->extra_info->num_args = regnum - A0_REGNUM + 1;
+ get_frame_extra_info (fci)->num_args = regnum - A0_REGNUM + 1;
break;
}
}
return 0;
}
-/* Macros to round N up or down to the next A boundary;
- A must be a power of two. */
-
-#define ROUND_DOWN(n,a) ((n) & ~((a)-1))
-#define ROUND_UP(n,a) (((n)+(a)-1) & ~((a)-1))
-
/* Adjust the address downward (direction of stack growth) so that it
is correctly aligned for a new stack frame. */
static CORE_ADDR
mips_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr)
{
- return ROUND_DOWN (addr, 16);
+ return align_down (addr, 16);
}
static CORE_ADDR
-mips_eabi_push_arguments (int nargs,
- struct value **args,
- CORE_ADDR sp,
- int struct_return,
- CORE_ADDR struct_addr)
+mips_eabi_push_dummy_call (struct gdbarch *gdbarch, CORE_ADDR func_addr,
+ struct regcache *regcache, CORE_ADDR bp_addr, int nargs,
+ struct value **args, CORE_ADDR sp, int struct_return,
+ CORE_ADDR struct_addr)
{
int argreg;
int float_argreg;
int len = 0;
int stack_offset = 0;
+ /* For shared libraries, "t9" needs to point at the function
+ address. */
+ regcache_cooked_write_signed (regcache, T9_REGNUM, func_addr);
+
+ /* Set the return address register to point to the entry point of
+ the program, where a breakpoint lies in wait. */
+ regcache_cooked_write_signed (regcache, RA_REGNUM, bp_addr);
+
/* First ensure that the stack and structure return address (if any)
are properly aligned. The stack has to be at least 64-bit
aligned even on 32-bit machines, because doubles must be 64-bit
aligned. For n32 and n64, stack frames need to be 128-bit
aligned, so we round to this widest known alignment. */
- sp = ROUND_DOWN (sp, 16);
- struct_addr = ROUND_DOWN (struct_addr, 16);
+ sp = align_down (sp, 16);
+ struct_addr = align_down (struct_addr, 16);
/* Now make space on the stack for the args. We allocate more
than necessary for EABI, because the first few arguments are
passed in registers, but that's OK. */
for (argnum = 0; argnum < nargs; argnum++)
- len += ROUND_UP (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
MIPS_STACK_ARGSIZE);
- sp -= ROUND_UP (len, 16);
+ sp -= align_up (len, 16);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_eabi_push_arguments: sp=0x%s allocated %d\n",
- paddr_nz (sp), ROUND_UP (len, 16));
+ "mips_eabi_push_dummy_call: sp=0x%s allocated %ld\n",
+ paddr_nz (sp), (long) align_up (len, 16));
/* Initialize the integer and float register pointers. */
argreg = A0_REGNUM;
{
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_eabi_push_arguments: struct_return reg=%d 0x%s\n",
+ "mips_eabi_push_dummy_call: struct_return reg=%d 0x%s\n",
argreg, paddr_nz (struct_addr));
write_register (argreg++, struct_addr);
}
for (argnum = 0; argnum < nargs; argnum++)
{
char *val;
- char *valbuf = alloca (MAX_REGISTER_RAW_SIZE);
+ char valbuf[MAX_REGISTER_SIZE];
struct value *arg = args[argnum];
struct type *arg_type = check_typedef (VALUE_TYPE (arg));
int len = TYPE_LENGTH (arg_type);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_eabi_push_arguments: %d len=%d type=%d",
+ "mips_eabi_push_dummy_call: %d len=%d type=%d",
argnum + 1, len, (int) typecode);
/* The EABI passes structures that do not fit in a register by
if (len > MIPS_SAVED_REGSIZE
&& (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION))
{
- store_address (valbuf, MIPS_SAVED_REGSIZE, VALUE_ADDRESS (arg));
+ store_unsigned_integer (valbuf, MIPS_SAVED_REGSIZE, VALUE_ADDRESS (arg));
typecode = TYPE_CODE_PTR;
len = MIPS_SAVED_REGSIZE;
val = valbuf;
only needs to be adjusted when it has been used. */
if (stack_used_p)
- stack_offset += ROUND_UP (partial_len, MIPS_STACK_ARGSIZE);
+ stack_offset += align_up (partial_len, MIPS_STACK_ARGSIZE);
}
}
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, "\n");
}
+ regcache_cooked_write_signed (regcache, SP_REGNUM, sp);
+
/* Return adjusted stack pointer. */
return sp;
}
-/* N32/N64 version of push_arguments. */
+/* N32/N64 version of push_dummy_call. */
static CORE_ADDR
-mips_n32n64_push_arguments (int nargs,
- struct value **args,
- CORE_ADDR sp,
- int struct_return,
- CORE_ADDR struct_addr)
+mips_n32n64_push_dummy_call (struct gdbarch *gdbarch, CORE_ADDR func_addr,
+ struct regcache *regcache, CORE_ADDR bp_addr, int nargs,
+ struct value **args, CORE_ADDR sp, int struct_return,
+ CORE_ADDR struct_addr)
{
int argreg;
int float_argreg;
int len = 0;
int stack_offset = 0;
+ /* For shared libraries, "t9" needs to point at the function
+ address. */
+ regcache_cooked_write_signed (regcache, T9_REGNUM, func_addr);
+
+ /* Set the return address register to point to the entry point of
+ the program, where a breakpoint lies in wait. */
+ regcache_cooked_write_signed (regcache, RA_REGNUM, bp_addr);
+
/* First ensure that the stack and structure return address (if any)
are properly aligned. The stack has to be at least 64-bit
aligned even on 32-bit machines, because doubles must be 64-bit
aligned. For n32 and n64, stack frames need to be 128-bit
aligned, so we round to this widest known alignment. */
- sp = ROUND_DOWN (sp, 16);
- struct_addr = ROUND_DOWN (struct_addr, 16);
+ sp = align_down (sp, 16);
+ struct_addr = align_down (struct_addr, 16);
/* Now make space on the stack for the args. */
for (argnum = 0; argnum < nargs; argnum++)
- len += ROUND_UP (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
MIPS_STACK_ARGSIZE);
- sp -= ROUND_UP (len, 16);
+ sp -= align_up (len, 16);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_n32n64_push_arguments: sp=0x%s allocated %d\n",
- paddr_nz (sp), ROUND_UP (len, 16));
+ "mips_n32n64_push_dummy_call: sp=0x%s allocated %ld\n",
+ paddr_nz (sp), (long) align_up (len, 16));
/* Initialize the integer and float register pointers. */
argreg = A0_REGNUM;
{
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_n32n64_push_arguments: struct_return reg=%d 0x%s\n",
+ "mips_n32n64_push_dummy_call: struct_return reg=%d 0x%s\n",
argreg, paddr_nz (struct_addr));
write_register (argreg++, struct_addr);
}
for (argnum = 0; argnum < nargs; argnum++)
{
char *val;
- char *valbuf = alloca (MAX_REGISTER_RAW_SIZE);
+ char valbuf[MAX_REGISTER_SIZE];
struct value *arg = args[argnum];
struct type *arg_type = check_typedef (VALUE_TYPE (arg));
int len = TYPE_LENGTH (arg_type);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_n32n64_push_arguments: %d len=%d type=%d",
+ "mips_n32n64_push_dummy_call: %d len=%d type=%d",
argnum + 1, len, (int) typecode);
val = (char *) VALUE_CONTENTS (arg);
adjusted when it has been used. */
if (stack_used_p)
- stack_offset += ROUND_UP (partial_len, MIPS_STACK_ARGSIZE);
+ stack_offset += align_up (partial_len, MIPS_STACK_ARGSIZE);
}
}
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, "\n");
}
+ regcache_cooked_write_signed (regcache, SP_REGNUM, sp);
+
/* Return adjusted stack pointer. */
return sp;
}
-/* O32 version of push_arguments. */
+/* O32 version of push_dummy_call. */
static CORE_ADDR
-mips_o32_push_arguments (int nargs,
- struct value **args,
- CORE_ADDR sp,
- int struct_return,
- CORE_ADDR struct_addr)
+mips_o32_push_dummy_call (struct gdbarch *gdbarch, CORE_ADDR func_addr,
+ struct regcache *regcache, CORE_ADDR bp_addr, int nargs,
+ struct value **args, CORE_ADDR sp, int struct_return,
+ CORE_ADDR struct_addr)
{
int argreg;
int float_argreg;
int len = 0;
int stack_offset = 0;
+ /* For shared libraries, "t9" needs to point at the function
+ address. */
+ regcache_cooked_write_signed (regcache, T9_REGNUM, func_addr);
+
+ /* Set the return address register to point to the entry point of
+ the program, where a breakpoint lies in wait. */
+ regcache_cooked_write_signed (regcache, RA_REGNUM, bp_addr);
+
/* First ensure that the stack and structure return address (if any)
are properly aligned. The stack has to be at least 64-bit
aligned even on 32-bit machines, because doubles must be 64-bit
aligned. For n32 and n64, stack frames need to be 128-bit
aligned, so we round to this widest known alignment. */
- sp = ROUND_DOWN (sp, 16);
- struct_addr = ROUND_DOWN (struct_addr, 16);
+ sp = align_down (sp, 16);
+ struct_addr = align_down (struct_addr, 16);
/* Now make space on the stack for the args. */
for (argnum = 0; argnum < nargs; argnum++)
- len += ROUND_UP (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
MIPS_STACK_ARGSIZE);
- sp -= ROUND_UP (len, 16);
+ sp -= align_up (len, 16);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_o32_push_arguments: sp=0x%s allocated %d\n",
- paddr_nz (sp), ROUND_UP (len, 16));
+ "mips_o32_push_dummy_call: sp=0x%s allocated %ld\n",
+ paddr_nz (sp), (long) align_up (len, 16));
/* Initialize the integer and float register pointers. */
argreg = A0_REGNUM;
{
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_o32_push_arguments: struct_return reg=%d 0x%s\n",
+ "mips_o32_push_dummy_call: struct_return reg=%d 0x%s\n",
argreg, paddr_nz (struct_addr));
write_register (argreg++, struct_addr);
stack_offset += MIPS_STACK_ARGSIZE;
for (argnum = 0; argnum < nargs; argnum++)
{
char *val;
- char *valbuf = alloca (MAX_REGISTER_RAW_SIZE);
+ char valbuf[MAX_REGISTER_SIZE];
struct value *arg = args[argnum];
struct type *arg_type = check_typedef (VALUE_TYPE (arg));
int len = TYPE_LENGTH (arg_type);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_o32_push_arguments: %d len=%d type=%d",
+ "mips_o32_push_dummy_call: %d len=%d type=%d",
argnum + 1, len, (int) typecode);
val = (char *) VALUE_CONTENTS (arg);
argreg += FP_REGISTER_DOUBLE ? 1 : 2;
}
/* Reserve space for the FP register. */
- stack_offset += ROUND_UP (len, MIPS_STACK_ARGSIZE);
+ stack_offset += align_up (len, MIPS_STACK_ARGSIZE);
}
else
{
refered to as their "home". Consequently, space is
always allocated. */
- stack_offset += ROUND_UP (partial_len, MIPS_STACK_ARGSIZE);
+ stack_offset += align_up (partial_len, MIPS_STACK_ARGSIZE);
}
}
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, "\n");
}
+ regcache_cooked_write_signed (regcache, SP_REGNUM, sp);
+
/* Return adjusted stack pointer. */
return sp;
}
-/* O64 version of push_arguments. */
+/* O64 version of push_dummy_call. */
static CORE_ADDR
-mips_o64_push_arguments (int nargs,
- struct value **args,
- CORE_ADDR sp,
- int struct_return,
- CORE_ADDR struct_addr)
+mips_o64_push_dummy_call (struct gdbarch *gdbarch, CORE_ADDR func_addr,
+ struct regcache *regcache, CORE_ADDR bp_addr, int nargs,
+ struct value **args, CORE_ADDR sp, int struct_return,
+ CORE_ADDR struct_addr)
{
int argreg;
int float_argreg;
int len = 0;
int stack_offset = 0;
+ /* For shared libraries, "t9" needs to point at the function
+ address. */
+ regcache_cooked_write_signed (regcache, T9_REGNUM, func_addr);
+
+ /* Set the return address register to point to the entry point of
+ the program, where a breakpoint lies in wait. */
+ regcache_cooked_write_signed (regcache, RA_REGNUM, bp_addr);
+
/* First ensure that the stack and structure return address (if any)
are properly aligned. The stack has to be at least 64-bit
aligned even on 32-bit machines, because doubles must be 64-bit
aligned. For n32 and n64, stack frames need to be 128-bit
aligned, so we round to this widest known alignment. */
- sp = ROUND_DOWN (sp, 16);
- struct_addr = ROUND_DOWN (struct_addr, 16);
+ sp = align_down (sp, 16);
+ struct_addr = align_down (struct_addr, 16);
/* Now make space on the stack for the args. */
for (argnum = 0; argnum < nargs; argnum++)
- len += ROUND_UP (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
MIPS_STACK_ARGSIZE);
- sp -= ROUND_UP (len, 16);
+ sp -= align_up (len, 16);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_o64_push_arguments: sp=0x%s allocated %d\n",
- paddr_nz (sp), ROUND_UP (len, 16));
+ "mips_o64_push_dummy_call: sp=0x%s allocated %ld\n",
+ paddr_nz (sp), (long) align_up (len, 16));
/* Initialize the integer and float register pointers. */
argreg = A0_REGNUM;
{
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_o64_push_arguments: struct_return reg=%d 0x%s\n",
+ "mips_o64_push_dummy_call: struct_return reg=%d 0x%s\n",
argreg, paddr_nz (struct_addr));
write_register (argreg++, struct_addr);
stack_offset += MIPS_STACK_ARGSIZE;
for (argnum = 0; argnum < nargs; argnum++)
{
char *val;
- char *valbuf = alloca (MAX_REGISTER_RAW_SIZE);
+ char valbuf[MAX_REGISTER_SIZE];
struct value *arg = args[argnum];
struct type *arg_type = check_typedef (VALUE_TYPE (arg));
int len = TYPE_LENGTH (arg_type);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_o64_push_arguments: %d len=%d type=%d",
+ "mips_o64_push_dummy_call: %d len=%d type=%d",
argnum + 1, len, (int) typecode);
val = (char *) VALUE_CONTENTS (arg);
argreg += FP_REGISTER_DOUBLE ? 1 : 2;
}
/* Reserve space for the FP register. */
- stack_offset += ROUND_UP (len, MIPS_STACK_ARGSIZE);
+ stack_offset += align_up (len, MIPS_STACK_ARGSIZE);
}
else
{
refered to as their "home". Consequently, space is
always allocated. */
- stack_offset += ROUND_UP (partial_len, MIPS_STACK_ARGSIZE);
+ stack_offset += align_up (partial_len, MIPS_STACK_ARGSIZE);
}
}
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, "\n");
}
- /* Return adjusted stack pointer. */
- return sp;
-}
+ regcache_cooked_write_signed (regcache, SP_REGNUM, sp);
-static CORE_ADDR
-mips_push_return_address (CORE_ADDR pc, CORE_ADDR sp)
-{
- /* Set the return address register to point to the entry
- point of the program, where a breakpoint lies in wait. */
- write_register (RA_REGNUM, CALL_DUMMY_ADDRESS ());
+ /* Return adjusted stack pointer. */
return sp;
}
-static void
-mips_push_register (CORE_ADDR * sp, int regno)
-{
- char *buffer = alloca (MAX_REGISTER_RAW_SIZE);
- int regsize;
- int offset;
- if (MIPS_SAVED_REGSIZE < REGISTER_RAW_SIZE (regno))
- {
- regsize = MIPS_SAVED_REGSIZE;
- offset = (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- ? REGISTER_RAW_SIZE (regno) - MIPS_SAVED_REGSIZE
- : 0);
- }
- else
- {
- regsize = REGISTER_RAW_SIZE (regno);
- offset = 0;
- }
- *sp -= regsize;
- deprecated_read_register_gen (regno, buffer);
- write_memory (*sp, buffer + offset, regsize);
-}
-
-/* MASK(i,j) == (1<<i) + (1<<(i+1)) + ... + (1<<j)). Assume i<=j<(MIPS_NUMREGS-1). */
-#define MASK(i,j) (((1 << ((j)+1))-1) ^ ((1 << (i))-1))
-
-static void
-mips_push_dummy_frame (void)
-{
- int ireg;
- struct linked_proc_info *link = (struct linked_proc_info *)
- xmalloc (sizeof (struct linked_proc_info));
- mips_extra_func_info_t proc_desc = &link->info;
- CORE_ADDR sp = ADDR_BITS_REMOVE (read_signed_register (SP_REGNUM));
- CORE_ADDR old_sp = sp;
- link->next = linked_proc_desc_table;
- linked_proc_desc_table = link;
-
-/* FIXME! are these correct ? */
-#define PUSH_FP_REGNUM 16 /* must be a register preserved across calls */
-#define GEN_REG_SAVE_MASK MASK(1,16)|MASK(24,28)|(1<<(MIPS_NUMREGS-1))
-#define FLOAT_REG_SAVE_MASK MASK(0,19)
-#define FLOAT_SINGLE_REG_SAVE_MASK \
- ((1<<18)|(1<<16)|(1<<14)|(1<<12)|(1<<10)|(1<<8)|(1<<6)|(1<<4)|(1<<2)|(1<<0))
- /*
- * The registers we must save are all those not preserved across
- * procedure calls. Dest_Reg (see tm-mips.h) must also be saved.
- * In addition, we must save the PC, PUSH_FP_REGNUM, MMLO/-HI
- * and FP Control/Status registers.
- *
- *
- * Dummy frame layout:
- * (high memory)
- * Saved PC
- * Saved MMHI, MMLO, FPC_CSR
- * Saved R31
- * Saved R28
- * ...
- * Saved R1
- * Saved D18 (i.e. F19, F18)
- * ...
- * Saved D0 (i.e. F1, F0)
- * Argument build area and stack arguments written via mips_push_arguments
- * (low memory)
- */
-
- /* Save special registers (PC, MMHI, MMLO, FPC_CSR) */
- PROC_FRAME_REG (proc_desc) = PUSH_FP_REGNUM;
- PROC_FRAME_OFFSET (proc_desc) = 0;
- PROC_FRAME_ADJUST (proc_desc) = 0;
- mips_push_register (&sp, PC_REGNUM);
- mips_push_register (&sp, HI_REGNUM);
- mips_push_register (&sp, LO_REGNUM);
- mips_push_register (&sp, MIPS_FPU_TYPE == MIPS_FPU_NONE ? 0 : FCRCS_REGNUM);
-
- /* Save general CPU registers */
- PROC_REG_MASK (proc_desc) = GEN_REG_SAVE_MASK;
- /* PROC_REG_OFFSET is the offset of the first saved register from FP. */
- PROC_REG_OFFSET (proc_desc) = sp - old_sp - MIPS_SAVED_REGSIZE;
- for (ireg = 32; --ireg >= 0;)
- if (PROC_REG_MASK (proc_desc) & (1 << ireg))
- mips_push_register (&sp, ireg);
-
- /* Save floating point registers starting with high order word */
- PROC_FREG_MASK (proc_desc) =
- MIPS_FPU_TYPE == MIPS_FPU_DOUBLE ? FLOAT_REG_SAVE_MASK
- : MIPS_FPU_TYPE == MIPS_FPU_SINGLE ? FLOAT_SINGLE_REG_SAVE_MASK : 0;
- /* PROC_FREG_OFFSET is the offset of the first saved *double* register
- from FP. */
- PROC_FREG_OFFSET (proc_desc) = sp - old_sp - 8;
- for (ireg = 32; --ireg >= 0;)
- if (PROC_FREG_MASK (proc_desc) & (1 << ireg))
- mips_push_register (&sp, ireg + FP0_REGNUM);
-
- /* Update the frame pointer for the call dummy and the stack pointer.
- Set the procedure's starting and ending addresses to point to the
- call dummy address at the entry point. */
- write_register (PUSH_FP_REGNUM, old_sp);
- write_register (SP_REGNUM, sp);
- PROC_LOW_ADDR (proc_desc) = CALL_DUMMY_ADDRESS ();
- PROC_HIGH_ADDR (proc_desc) = CALL_DUMMY_ADDRESS () + 4;
- SET_PROC_DESC_IS_DUMMY (proc_desc);
- PROC_PC_REG (proc_desc) = RA_REGNUM;
-}
-
static void
mips_pop_frame (void)
{
- register int regnum;
+ int regnum;
struct frame_info *frame = get_current_frame ();
CORE_ADDR new_sp = get_frame_base (frame);
- mips_extra_func_info_t proc_desc = frame->extra_info->proc_desc;
+ mips_extra_func_info_t proc_desc;
- if (DEPRECATED_PC_IN_CALL_DUMMY (frame->pc, 0, 0))
+ if (DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (frame), 0, 0))
{
generic_pop_dummy_frame ();
flush_cached_frames ();
return;
}
- write_register (PC_REGNUM, FRAME_SAVED_PC (frame));
- if (frame->saved_regs == NULL)
- FRAME_INIT_SAVED_REGS (frame);
+ proc_desc = get_frame_extra_info (frame)->proc_desc;
+ write_register (PC_REGNUM, DEPRECATED_FRAME_SAVED_PC (frame));
+ mips_find_saved_regs (frame);
for (regnum = 0; regnum < NUM_REGS; regnum++)
if (regnum != SP_REGNUM && regnum != PC_REGNUM
- && frame->saved_regs[regnum])
+ && deprecated_get_frame_saved_regs (frame)[regnum])
{
/* Floating point registers must not be sign extended,
in case MIPS_SAVED_REGSIZE = 4 but sizeof (FP0_REGNUM) == 8. */
if (FP0_REGNUM <= regnum && regnum < FP0_REGNUM + 32)
write_register (regnum,
- read_memory_unsigned_integer (frame->saved_regs[regnum],
+ read_memory_unsigned_integer (deprecated_get_frame_saved_regs (frame)[regnum],
MIPS_SAVED_REGSIZE));
else
write_register (regnum,
- read_memory_integer (frame->saved_regs[regnum],
+ read_memory_integer (deprecated_get_frame_saved_regs (frame)[regnum],
MIPS_SAVED_REGSIZE));
}
}
}
-static void
-mips_fix_call_dummy (char *dummy, CORE_ADDR pc, CORE_ADDR fun, int nargs,
- struct value **args, struct type *type, int gcc_p)
-{
- write_register(T9_REGNUM, fun);
-}
-
/* Floating point register management.
Background: MIPS1 & 2 fp registers are 32 bits wide. To support
into rare_buffer. */
static void
-mips_read_fp_register_single (int regno, char *rare_buffer)
+mips_read_fp_register_single (struct frame_info *frame, int regno,
+ char *rare_buffer)
{
- int raw_size = REGISTER_RAW_SIZE (regno);
+ int raw_size = DEPRECATED_REGISTER_RAW_SIZE (regno);
char *raw_buffer = alloca (raw_size);
- if (!frame_register_read (deprecated_selected_frame, regno, raw_buffer))
+ if (!frame_register_read (frame, regno, raw_buffer))
error ("can't read register %d (%s)", regno, REGISTER_NAME (regno));
if (raw_size == 8)
{
register. */
static void
-mips_read_fp_register_double (int regno, char *rare_buffer)
+mips_read_fp_register_double (struct frame_info *frame, int regno,
+ char *rare_buffer)
{
- int raw_size = REGISTER_RAW_SIZE (regno);
+ int raw_size = DEPRECATED_REGISTER_RAW_SIZE (regno);
if (raw_size == 8 && !mips2_fp_compat ())
{
/* We have a 64-bit value for this register, and we should use
all 64 bits. */
- if (!frame_register_read (deprecated_selected_frame, regno, rare_buffer))
+ if (!frame_register_read (frame, regno, rare_buffer))
error ("can't read register %d (%s)", regno, REGISTER_NAME (regno));
}
else
each register. */
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
- mips_read_fp_register_single (regno, rare_buffer + 4);
- mips_read_fp_register_single (regno + 1, rare_buffer);
+ mips_read_fp_register_single (frame, regno, rare_buffer + 4);
+ mips_read_fp_register_single (frame, regno + 1, rare_buffer);
}
else
{
- mips_read_fp_register_single (regno, rare_buffer);
- mips_read_fp_register_single (regno + 1, rare_buffer + 4);
+ mips_read_fp_register_single (frame, regno, rare_buffer);
+ mips_read_fp_register_single (frame, regno + 1, rare_buffer + 4);
}
}
}
static void
-mips_print_register (int regnum, int all)
-{
- char *raw_buffer = alloca (MAX_REGISTER_RAW_SIZE);
-
- /* Get the data in raw format. */
- if (!frame_register_read (deprecated_selected_frame, regnum, raw_buffer))
- {
- printf_filtered ("%s: [Invalid]", REGISTER_NAME (regnum));
- return;
- }
-
- /* If we have a actual 32-bit floating point register (or we are in
- 32-bit compatibility mode), and the register is even-numbered,
- also print it as a double (spanning two registers). */
- if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT
- && (REGISTER_RAW_SIZE (regnum) == 4
- || mips2_fp_compat ())
- && !((regnum - FP0_REGNUM) & 1))
- {
- char *dbuffer = alloca (2 * MAX_REGISTER_RAW_SIZE);
-
- mips_read_fp_register_double (regnum, dbuffer);
+mips_print_fp_register (struct ui_file *file, struct frame_info *frame,
+ int regnum)
+{ /* do values for FP (float) regs */
+ char *raw_buffer;
+ double doub, flt1, flt2; /* doubles extracted from raw hex data */
+ int inv1, inv2, namelen;
- printf_filtered ("(d%d: ", regnum - FP0_REGNUM);
- val_print (mips_double_register_type (), dbuffer, 0, 0,
- gdb_stdout, 0, 1, 0, Val_pretty_default);
- printf_filtered ("); ");
- }
- fputs_filtered (REGISTER_NAME (regnum), gdb_stdout);
+ raw_buffer = (char *) alloca (2 * DEPRECATED_REGISTER_RAW_SIZE (FP0_REGNUM));
- /* The problem with printing numeric register names (r26, etc.) is that
- the user can't use them on input. Probably the best solution is to
- fix it so that either the numeric or the funky (a2, etc.) names
- are accepted on input. */
- if (regnum < MIPS_NUMREGS)
- printf_filtered ("(r%d): ", regnum);
- else
- printf_filtered (": ");
+ fprintf_filtered (file, "%s:", REGISTER_NAME (regnum));
+ fprintf_filtered (file, "%*s", 4 - (int) strlen (REGISTER_NAME (regnum)),
+ "");
- /* If virtual format is floating, print it that way. */
- if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
- if (REGISTER_RAW_SIZE (regnum) == 8 && !mips2_fp_compat ())
- {
- /* We have a meaningful 64-bit value in this register. Show
- it as a 32-bit float and a 64-bit double. */
- int offset = 4 * (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG);
-
- printf_filtered (" (float) ");
- val_print (mips_float_register_type (), raw_buffer + offset, 0, 0,
- gdb_stdout, 0, 1, 0, Val_pretty_default);
- printf_filtered (", (double) ");
- val_print (mips_double_register_type (), raw_buffer, 0, 0,
- gdb_stdout, 0, 1, 0, Val_pretty_default);
- }
- else
- val_print (REGISTER_VIRTUAL_TYPE (regnum), raw_buffer, 0, 0,
- gdb_stdout, 0, 1, 0, Val_pretty_default);
- /* Else print as integer in hex. */
- else
+ if (DEPRECATED_REGISTER_RAW_SIZE (regnum) == 4 || mips2_fp_compat ())
{
- int offset;
-
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- offset = REGISTER_RAW_SIZE (regnum) - REGISTER_VIRTUAL_SIZE (regnum);
- else
- offset = 0;
-
- print_scalar_formatted (raw_buffer + offset,
- REGISTER_VIRTUAL_TYPE (regnum),
- 'x', 0, gdb_stdout);
- }
-}
+ /* 4-byte registers: Print hex and floating. Also print even
+ numbered registers as doubles. */
+ mips_read_fp_register_single (frame, regnum, raw_buffer);
+ flt1 = unpack_double (mips_float_register_type (), raw_buffer, &inv1);
-/* Replacement for generic do_registers_info.
- Print regs in pretty columns. */
+ print_scalar_formatted (raw_buffer, builtin_type_uint32, 'x', 'w', file);
-static int
-do_fp_register_row (int regnum)
-{ /* do values for FP (float) regs */
- char *raw_buffer;
- double doub, flt1, flt2; /* doubles extracted from raw hex data */
- int inv1, inv2, inv3;
+ fprintf_filtered (file, " flt: ");
+ if (inv1)
+ fprintf_filtered (file, " <invalid float> ");
+ else
+ fprintf_filtered (file, "%-17.9g", flt1);
- raw_buffer = (char *) alloca (2 * REGISTER_RAW_SIZE (FP0_REGNUM));
+ if (regnum % 2 == 0)
+ {
+ mips_read_fp_register_double (frame, regnum, raw_buffer);
+ doub = unpack_double (mips_double_register_type (), raw_buffer,
+ &inv2);
- if (REGISTER_RAW_SIZE (regnum) == 4 || mips2_fp_compat ())
+ fprintf_filtered (file, " dbl: ");
+ if (inv2)
+ fprintf_filtered (file, "<invalid double>");
+ else
+ fprintf_filtered (file, "%-24.17g", doub);
+ }
+ }
+ else
{
- /* 4-byte registers: we can fit two registers per row. */
- /* Also print every pair of 4-byte regs as an 8-byte double. */
- mips_read_fp_register_single (regnum, raw_buffer);
+ /* Eight byte registers: print each one as hex, float and double. */
+ mips_read_fp_register_single (frame, regnum, raw_buffer);
flt1 = unpack_double (mips_float_register_type (), raw_buffer, &inv1);
- mips_read_fp_register_single (regnum + 1, raw_buffer);
- flt2 = unpack_double (mips_float_register_type (), raw_buffer, &inv2);
+ mips_read_fp_register_double (frame, regnum, raw_buffer);
+ doub = unpack_double (mips_double_register_type (), raw_buffer, &inv2);
+
- mips_read_fp_register_double (regnum, raw_buffer);
- doub = unpack_double (mips_double_register_type (), raw_buffer, &inv3);
+ print_scalar_formatted (raw_buffer, builtin_type_uint64, 'x', 'g', file);
- printf_filtered (" %-5s", REGISTER_NAME (regnum));
+ fprintf_filtered (file, " flt: ");
if (inv1)
- printf_filtered (": <invalid float>");
+ fprintf_filtered (file, "<invalid float>");
else
- printf_filtered ("%-17.9g", flt1);
+ fprintf_filtered (file, "%-17.9g", flt1);
- printf_filtered (" %-5s", REGISTER_NAME (regnum + 1));
+ fprintf_filtered (file, " dbl: ");
if (inv2)
- printf_filtered (": <invalid float>");
+ fprintf_filtered (file, "<invalid double>");
else
- printf_filtered ("%-17.9g", flt2);
+ fprintf_filtered (file, "%-24.17g", doub);
+ }
+}
- printf_filtered (" dbl: ");
- if (inv3)
- printf_filtered ("<invalid double>");
- else
- printf_filtered ("%-24.17g", doub);
- printf_filtered ("\n");
+static void
+mips_print_register (struct ui_file *file, struct frame_info *frame,
+ int regnum, int all)
+{
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+ char raw_buffer[MAX_REGISTER_SIZE];
+ int offset;
- /* may want to do hex display here (future enhancement) */
- regnum += 2;
+ if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) == TYPE_CODE_FLT)
+ {
+ mips_print_fp_register (file, frame, regnum);
+ return;
}
- else
+
+ /* Get the data in raw format. */
+ if (!frame_register_read (frame, regnum, raw_buffer))
{
- /* Eight byte registers: print each one as float AND as double. */
- mips_read_fp_register_single (regnum, raw_buffer);
- flt1 = unpack_double (mips_double_register_type (), raw_buffer, &inv1);
+ fprintf_filtered (file, "%s: [Invalid]", REGISTER_NAME (regnum));
+ return;
+ }
- mips_read_fp_register_double (regnum, raw_buffer);
- doub = unpack_double (mips_double_register_type (), raw_buffer, &inv3);
+ fputs_filtered (REGISTER_NAME (regnum), file);
- printf_filtered (" %-5s: ", REGISTER_NAME (regnum));
- if (inv1)
- printf_filtered ("<invalid float>");
- else
- printf_filtered ("flt: %-17.9g", flt1);
+ /* The problem with printing numeric register names (r26, etc.) is that
+ the user can't use them on input. Probably the best solution is to
+ fix it so that either the numeric or the funky (a2, etc.) names
+ are accepted on input. */
+ if (regnum < MIPS_NUMREGS)
+ fprintf_filtered (file, "(r%d): ", regnum);
+ else
+ fprintf_filtered (file, ": ");
- printf_filtered (" dbl: ");
- if (inv3)
- printf_filtered ("<invalid double>");
- else
- printf_filtered ("%-24.17g", doub);
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ offset = DEPRECATED_REGISTER_RAW_SIZE (regnum) - DEPRECATED_REGISTER_VIRTUAL_SIZE (regnum);
+ else
+ offset = 0;
- printf_filtered ("\n");
- /* may want to do hex display here (future enhancement) */
- regnum++;
- }
- return regnum;
+ print_scalar_formatted (raw_buffer + offset, gdbarch_register_type (gdbarch, regnum),
+ 'x', 0, file);
}
+/* Replacement for generic do_registers_info.
+ Print regs in pretty columns. */
+
+static int
+print_fp_register_row (struct ui_file *file, struct frame_info *frame,
+ int regnum)
+{
+ fprintf_filtered (file, " ");
+ mips_print_fp_register (file, frame, regnum);
+ fprintf_filtered (file, "\n");
+ return regnum + 1;
+}
+
+
/* Print a row's worth of GP (int) registers, with name labels above */
static int
-do_gp_register_row (int regnum)
+print_gp_register_row (struct ui_file *file, struct frame_info *frame,
+ int start_regnum)
{
+ struct gdbarch *gdbarch = get_frame_arch (frame);
/* do values for GP (int) regs */
- char *raw_buffer = alloca (MAX_REGISTER_RAW_SIZE);
+ char raw_buffer[MAX_REGISTER_SIZE];
int ncols = (MIPS_REGSIZE == 8 ? 4 : 8); /* display cols per row */
int col, byte;
- int start_regnum = regnum;
- int numregs = NUM_REGS;
-
+ int regnum;
/* For GP registers, we print a separate row of names above the vals */
- printf_filtered (" ");
- for (col = 0; col < ncols && regnum < numregs; regnum++)
+ fprintf_filtered (file, " ");
+ for (col = 0, regnum = start_regnum;
+ col < ncols && regnum < NUM_REGS + NUM_PSEUDO_REGS;
+ regnum++)
{
if (*REGISTER_NAME (regnum) == '\0')
continue; /* unused register */
- if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
+ if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) == TYPE_CODE_FLT)
break; /* end the row: reached FP register */
- printf_filtered (MIPS_REGSIZE == 8 ? "%17s" : "%9s",
- REGISTER_NAME (regnum));
+ fprintf_filtered (file, MIPS_REGSIZE == 8 ? "%17s" : "%9s",
+ REGISTER_NAME (regnum));
col++;
}
- printf_filtered (start_regnum < MIPS_NUMREGS ? "\n R%-4d" : "\n ",
- start_regnum); /* print the R0 to R31 names */
+ /* print the R0 to R31 names */
+ if ((start_regnum % NUM_REGS) < MIPS_NUMREGS)
+ fprintf_filtered (file, "\n R%-4d", start_regnum % NUM_REGS);
+ else
+ fprintf_filtered (file, "\n ");
- regnum = start_regnum; /* go back to start of row */
/* now print the values in hex, 4 or 8 to the row */
- for (col = 0; col < ncols && regnum < numregs; regnum++)
+ for (col = 0, regnum = start_regnum;
+ col < ncols && regnum < NUM_REGS + NUM_PSEUDO_REGS;
+ regnum++)
{
if (*REGISTER_NAME (regnum) == '\0')
continue; /* unused register */
- if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
+ if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) == TYPE_CODE_FLT)
break; /* end row: reached FP register */
/* OK: get the data in raw format. */
- if (!frame_register_read (deprecated_selected_frame, regnum, raw_buffer))
+ if (!frame_register_read (frame, regnum, raw_buffer))
error ("can't read register %d (%s)", regnum, REGISTER_NAME (regnum));
/* pad small registers */
- for (byte = 0; byte < (MIPS_REGSIZE - REGISTER_VIRTUAL_SIZE (regnum)); byte++)
+ for (byte = 0; byte < (MIPS_REGSIZE - DEPRECATED_REGISTER_VIRTUAL_SIZE (regnum)); byte++)
printf_filtered (" ");
/* Now print the register value in hex, endian order. */
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- for (byte = REGISTER_RAW_SIZE (regnum) - REGISTER_VIRTUAL_SIZE (regnum);
- byte < REGISTER_RAW_SIZE (regnum);
+ for (byte = DEPRECATED_REGISTER_RAW_SIZE (regnum) - DEPRECATED_REGISTER_VIRTUAL_SIZE (regnum);
+ byte < DEPRECATED_REGISTER_RAW_SIZE (regnum);
byte++)
- printf_filtered ("%02x", (unsigned char) raw_buffer[byte]);
+ fprintf_filtered (file, "%02x", (unsigned char) raw_buffer[byte]);
else
- for (byte = REGISTER_VIRTUAL_SIZE (regnum) - 1;
+ for (byte = DEPRECATED_REGISTER_VIRTUAL_SIZE (regnum) - 1;
byte >= 0;
byte--)
- printf_filtered ("%02x", (unsigned char) raw_buffer[byte]);
- printf_filtered (" ");
+ fprintf_filtered (file, "%02x", (unsigned char) raw_buffer[byte]);
+ fprintf_filtered (file, " ");
col++;
}
if (col > 0) /* ie. if we actually printed anything... */
- printf_filtered ("\n");
+ fprintf_filtered (file, "\n");
return regnum;
}
/* MIPS_DO_REGISTERS_INFO(): called by "info register" command */
static void
-mips_do_registers_info (int regnum, int fpregs)
+mips_print_registers_info (struct gdbarch *gdbarch, struct ui_file *file,
+ struct frame_info *frame, int regnum, int all)
{
if (regnum != -1) /* do one specified register */
{
+ gdb_assert (regnum >= NUM_REGS);
if (*(REGISTER_NAME (regnum)) == '\0')
error ("Not a valid register for the current processor type");
- mips_print_register (regnum, 0);
- printf_filtered ("\n");
+ mips_print_register (file, frame, regnum, 0);
+ fprintf_filtered (file, "\n");
}
else
/* do all (or most) registers */
{
- regnum = 0;
- while (regnum < NUM_REGS)
+ regnum = NUM_REGS;
+ while (regnum < NUM_REGS + NUM_PSEUDO_REGS)
{
- if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
- if (fpregs) /* true for "INFO ALL-REGISTERS" command */
- regnum = do_fp_register_row (regnum); /* FP regs */
- else
- regnum += MIPS_NUMREGS; /* skip floating point regs */
+ if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) == TYPE_CODE_FLT)
+ {
+ if (all) /* true for "INFO ALL-REGISTERS" command */
+ regnum = print_fp_register_row (file, frame, regnum);
+ else
+ regnum += MIPS_NUMREGS; /* skip floating point regs */
+ }
else
- regnum = do_gp_register_row (regnum); /* GP (int) regs */
+ regnum = print_gp_register_row (file, frame, regnum);
}
}
}
lo->buf_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0;
hi->buf_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 0 : 4;
lo->reg_offset = ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && REGISTER_RAW_SIZE (FP0_REGNUM) == 8)
+ && DEPRECATED_REGISTER_RAW_SIZE (FP0_REGNUM) == 8)
? 4 : 0);
hi->reg_offset = lo->reg_offset;
lo->reg = FP0_REGNUM + 0;
/* The floating point value fits in a single floating-point
register. */
lo->reg_offset = ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && REGISTER_RAW_SIZE (FP0_REGNUM) == 8
+ && DEPRECATED_REGISTER_RAW_SIZE (FP0_REGNUM) == 8
&& len == 4)
? 4 : 0);
lo->reg = FP0_REGNUM;
}
}
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && REGISTER_RAW_SIZE (regnum) == 8
+ && DEPRECATED_REGISTER_RAW_SIZE (regnum) == 8
&& MIPS_SAVED_REGSIZE == 4)
{
/* Account for the fact that only the least-signficant part
static void
mips_eabi_extract_return_value (struct type *valtype,
- char regbuf[REGISTER_BYTES],
+ char regbuf[],
char *valbuf)
{
struct return_value_word lo;
return_value_location (valtype, &hi, &lo);
memcpy (valbuf + lo.buf_offset,
- regbuf + REGISTER_BYTE (lo.reg) + lo.reg_offset,
+ regbuf + DEPRECATED_REGISTER_BYTE (lo.reg) + lo.reg_offset,
lo.len);
if (hi.len > 0)
memcpy (valbuf + hi.buf_offset,
- regbuf + REGISTER_BYTE (hi.reg) + hi.reg_offset,
+ regbuf + DEPRECATED_REGISTER_BYTE (hi.reg) + hi.reg_offset,
hi.len);
}
static void
mips_o64_extract_return_value (struct type *valtype,
- char regbuf[REGISTER_BYTES],
+ char regbuf[],
char *valbuf)
{
struct return_value_word lo;
return_value_location (valtype, &hi, &lo);
memcpy (valbuf + lo.buf_offset,
- regbuf + REGISTER_BYTE (lo.reg) + lo.reg_offset,
+ regbuf + DEPRECATED_REGISTER_BYTE (lo.reg) + lo.reg_offset,
lo.len);
if (hi.len > 0)
memcpy (valbuf + hi.buf_offset,
- regbuf + REGISTER_BYTE (hi.reg) + hi.reg_offset,
+ regbuf + DEPRECATED_REGISTER_BYTE (hi.reg) + hi.reg_offset,
hi.len);
}
static void
mips_eabi_store_return_value (struct type *valtype, char *valbuf)
{
- char *raw_buffer = alloca (MAX_REGISTER_RAW_SIZE);
+ char raw_buffer[MAX_REGISTER_SIZE];
struct return_value_word lo;
struct return_value_word hi;
return_value_location (valtype, &hi, &lo);
memset (raw_buffer, 0, sizeof (raw_buffer));
memcpy (raw_buffer + lo.reg_offset, valbuf + lo.buf_offset, lo.len);
- deprecated_write_register_bytes (REGISTER_BYTE (lo.reg), raw_buffer,
- REGISTER_RAW_SIZE (lo.reg));
+ deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (lo.reg), raw_buffer,
+ DEPRECATED_REGISTER_RAW_SIZE (lo.reg));
if (hi.len > 0)
{
memset (raw_buffer, 0, sizeof (raw_buffer));
memcpy (raw_buffer + hi.reg_offset, valbuf + hi.buf_offset, hi.len);
- deprecated_write_register_bytes (REGISTER_BYTE (hi.reg), raw_buffer,
- REGISTER_RAW_SIZE (hi.reg));
+ deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (hi.reg), raw_buffer,
+ DEPRECATED_REGISTER_RAW_SIZE (hi.reg));
}
}
static void
mips_o64_store_return_value (struct type *valtype, char *valbuf)
{
- char *raw_buffer = alloca (MAX_REGISTER_RAW_SIZE);
+ char raw_buffer[MAX_REGISTER_SIZE];
struct return_value_word lo;
struct return_value_word hi;
return_value_location (valtype, &hi, &lo);
memset (raw_buffer, 0, sizeof (raw_buffer));
memcpy (raw_buffer + lo.reg_offset, valbuf + lo.buf_offset, lo.len);
- deprecated_write_register_bytes (REGISTER_BYTE (lo.reg), raw_buffer,
- REGISTER_RAW_SIZE (lo.reg));
+ deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (lo.reg), raw_buffer,
+ DEPRECATED_REGISTER_RAW_SIZE (lo.reg));
if (hi.len > 0)
{
memset (raw_buffer, 0, sizeof (raw_buffer));
memcpy (raw_buffer + hi.reg_offset, valbuf + hi.buf_offset, hi.len);
- deprecated_write_register_bytes (REGISTER_BYTE (hi.reg), raw_buffer,
- REGISTER_RAW_SIZE (hi.reg));
+ deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (hi.reg), raw_buffer,
+ DEPRECATED_REGISTER_RAW_SIZE (hi.reg));
}
}
least significant part of FP0. */
if (mips_debug)
fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
- mips_xfer_register (regcache, FP0_REGNUM, TYPE_LENGTH (type),
+ mips_xfer_register (regcache, NUM_REGS + FP0_REGNUM, TYPE_LENGTH (type),
TARGET_BYTE_ORDER, in, out, 0);
}
else if (TYPE_CODE (type) == TYPE_CODE_FLT
&& TYPE_LENGTH (type) == 8
&& tdep->mips_fpu_type != MIPS_FPU_NONE)
{
- /* A double-precision floating-point value. It fits in the
- least significant part of FP0/FP1 but with byte ordering
- based on the target (???). */
+ /* A double-precision floating-point value. The most
+ significant part goes in FP1, and the least significant in
+ FP0. */
if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return float in $fp0/$fp1\n");
+ fprintf_unfiltered (gdb_stderr, "Return float in $fp1/$fp0\n");
switch (TARGET_BYTE_ORDER)
{
case BFD_ENDIAN_LITTLE:
- mips_xfer_register (regcache, FP0_REGNUM + 0, 4,
+ mips_xfer_register (regcache, NUM_REGS + FP0_REGNUM + 0, 4,
TARGET_BYTE_ORDER, in, out, 0);
- mips_xfer_register (regcache, FP0_REGNUM + 1, 4,
+ mips_xfer_register (regcache, NUM_REGS + FP0_REGNUM + 1, 4,
TARGET_BYTE_ORDER, in, out, 4);
break;
case BFD_ENDIAN_BIG:
- mips_xfer_register (regcache, FP0_REGNUM + 1, 4,
+ mips_xfer_register (regcache, NUM_REGS + FP0_REGNUM + 1, 4,
TARGET_BYTE_ORDER, in, out, 0);
- mips_xfer_register (regcache, FP0_REGNUM + 0, 4,
+ mips_xfer_register (regcache, NUM_REGS + FP0_REGNUM + 0, 4,
TARGET_BYTE_ORDER, in, out, 4);
break;
default:
/* A struct that contains one or two floats. Each value is part
in the least significant part of their floating point
register.. */
- bfd_byte *reg = alloca (MAX_REGISTER_RAW_SIZE);
+ bfd_byte reg[MAX_REGISTER_SIZE];
int regnum;
int field;
for (field = 0, regnum = FP0_REGNUM;
/ TARGET_CHAR_BIT);
if (mips_debug)
fprintf_unfiltered (gdb_stderr, "Return float struct+%d\n", offset);
- mips_xfer_register (regcache, regnum, TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)),
+ mips_xfer_register (regcache, NUM_REGS + regnum,
+ TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)),
TARGET_BYTE_ORDER, in, out, offset);
}
}
int regnum;
for (offset = 0, regnum = V0_REGNUM;
offset < TYPE_LENGTH (type);
- offset += REGISTER_RAW_SIZE (regnum), regnum++)
+ offset += DEPRECATED_REGISTER_RAW_SIZE (regnum), regnum++)
{
- int xfer = REGISTER_RAW_SIZE (regnum);
+ int xfer = DEPRECATED_REGISTER_RAW_SIZE (regnum);
if (offset + xfer > TYPE_LENGTH (type))
xfer = TYPE_LENGTH (type) - offset;
if (mips_debug)
fprintf_unfiltered (gdb_stderr, "Return struct+%d:%d in $%d\n",
offset, xfer, regnum);
- mips_xfer_register (regcache, regnum, xfer, BFD_ENDIAN_UNKNOWN,
- in, out, offset);
+ mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
+ BFD_ENDIAN_UNKNOWN, in, out, offset);
}
}
#endif
if (mips_debug)
fprintf_unfiltered (gdb_stderr, "Return scalar+%d:%d in $%d\n",
offset, xfer, regnum);
- mips_xfer_register (regcache, regnum, xfer, TARGET_BYTE_ORDER,
- in, out, offset);
+ mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
+ TARGET_BYTE_ORDER, in, out, offset);
}
}
}
of FP0. */
if (mips_debug)
fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
- mips_xfer_register (regcache, FP0_REGNUM, TYPE_LENGTH (type),
+ mips_xfer_register (regcache, NUM_REGS + FP0_REGNUM, TYPE_LENGTH (type),
TARGET_BYTE_ORDER, in, out, 0);
}
else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
/* A struct that contains one or two floats. Each value is part
in the least significant part of their floating point
register.. */
- bfd_byte *reg = alloca (MAX_REGISTER_RAW_SIZE);
+ bfd_byte reg[MAX_REGISTER_SIZE];
int regnum;
int field;
for (field = 0, regnum = FP0_REGNUM;
/ TARGET_CHAR_BIT);
if (mips_debug)
fprintf_unfiltered (gdb_stderr, "Return float struct+%d\n", offset);
- mips_xfer_register (regcache, regnum, TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)),
+ mips_xfer_register (regcache, NUM_REGS + regnum,
+ TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)),
TARGET_BYTE_ORDER, in, out, offset);
}
}
int regnum;
for (offset = 0, regnum = V0_REGNUM;
offset < TYPE_LENGTH (type);
- offset += REGISTER_RAW_SIZE (regnum), regnum++)
+ offset += DEPRECATED_REGISTER_RAW_SIZE (regnum), regnum++)
{
- int xfer = REGISTER_RAW_SIZE (regnum);
+ int xfer = DEPRECATED_REGISTER_RAW_SIZE (regnum);
if (offset + xfer > TYPE_LENGTH (type))
xfer = TYPE_LENGTH (type) - offset;
if (mips_debug)
fprintf_unfiltered (gdb_stderr, "Return struct+%d:%d in $%d\n",
offset, xfer, regnum);
- mips_xfer_register (regcache, regnum, xfer, BFD_ENDIAN_UNKNOWN,
- in, out, offset);
+ mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
+ BFD_ENDIAN_UNKNOWN, in, out, offset);
}
}
else
int regnum;
for (offset = 0, regnum = V0_REGNUM;
offset < TYPE_LENGTH (type);
- offset += REGISTER_RAW_SIZE (regnum), regnum++)
+ offset += DEPRECATED_REGISTER_RAW_SIZE (regnum), regnum++)
{
- int xfer = REGISTER_RAW_SIZE (regnum);
+ int xfer = DEPRECATED_REGISTER_RAW_SIZE (regnum);
int pos = 0;
if (offset + xfer > TYPE_LENGTH (type))
xfer = TYPE_LENGTH (type) - offset;
if (mips_debug)
fprintf_unfiltered (gdb_stderr, "Return scalar+%d:%d in $%d\n",
offset, xfer, regnum);
- mips_xfer_register (regcache, regnum, xfer, TARGET_BYTE_ORDER,
- in, out, offset);
+ mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
+ TARGET_BYTE_ORDER, in, out, offset);
}
}
}
mips_n32n64_xfer_return_value (type, current_regcache, NULL, valbuf);
}
-static void
-mips_store_struct_return (CORE_ADDR addr, CORE_ADDR sp)
-{
- /* Nothing to do -- push_arguments does all the work. */
-}
-
static CORE_ADDR
mips_extract_struct_value_address (struct regcache *regcache)
{
reinit_frame_cache ();
}
-int
-gdb_print_insn_mips (bfd_vma memaddr, disassemble_info *info)
+static int
+gdb_print_insn_mips (bfd_vma memaddr, struct disassemble_info *info)
{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
mips_extra_func_info_t proc_desc;
/* Search for the function containing this address. Set the low bit
the search would fail because the symbol table says the function
starts at an odd address, i.e. 1 byte past the given address. */
memaddr = ADDR_BITS_REMOVE (memaddr);
- proc_desc = non_heuristic_proc_desc (MAKE_MIPS16_ADDR (memaddr), NULL);
+ proc_desc = non_heuristic_proc_desc (make_mips16_addr (memaddr), NULL);
/* Make an attempt to determine if this is a 16-bit function. If
the procedure descriptor exists and the address therein is odd,
it's definitely a 16-bit function. Otherwise, we have to just
guess that if the address passed in is odd, it's 16-bits. */
+ /* FIXME: cagney/2003-06-26: Is this even necessary? The
+ disassembler needs to be able to locally determine the ISA, and
+ not rely on GDB. Otherwize the stand-alone 'objdump -d' will not
+ work. */
if (proc_desc)
- info->mach = pc_is_mips16 (PROC_LOW_ADDR (proc_desc)) ?
- bfd_mach_mips16 : TM_PRINT_INSN_MACH;
+ {
+ if (pc_is_mips16 (PROC_LOW_ADDR (proc_desc)))
+ info->mach = bfd_mach_mips16;
+ }
else
- info->mach = pc_is_mips16 (memaddr) ?
- bfd_mach_mips16 : TM_PRINT_INSN_MACH;
+ {
+ if (pc_is_mips16 (memaddr))
+ info->mach = bfd_mach_mips16;
+ }
/* Round down the instruction address to the appropriate boundary. */
memaddr &= (info->mach == bfd_mach_mips16 ? ~1 : ~3);
+ /* Set the disassembler options. */
+ if (tdep->mips_abi == MIPS_ABI_N32
+ || tdep->mips_abi == MIPS_ABI_N64)
+ {
+ /* Set up the disassembler info, so that we get the right
+ register names from libopcodes. */
+ if (tdep->mips_abi == MIPS_ABI_N32)
+ info->disassembler_options = "gpr-names=n32";
+ else
+ info->disassembler_options = "gpr-names=64";
+ info->flavour = bfd_target_elf_flavour;
+ }
+ else
+ /* This string is not recognized explicitly by the disassembler,
+ but it tells the disassembler to not try to guess the ABI from
+ the bfd elf headers, such that, if the user overrides the ABI
+ of a program linked as NewABI, the disassembly will follow the
+ register naming conventions specified by the user. */
+ info->disassembler_options = "gpr-names=32";
+
/* Call the appropriate disassembler based on the target endian-ness. */
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
return print_insn_big_mips (memaddr, info);
return print_insn_little_mips (memaddr, info);
}
-/* Old-style breakpoint macros.
- The IDT board uses an unusual breakpoint value, and sometimes gets
- confused when it sees the usual MIPS breakpoint instruction. */
-
-#define BIG_BREAKPOINT {0, 0x5, 0, 0xd}
-#define LITTLE_BREAKPOINT {0xd, 0, 0x5, 0}
-#define PMON_BIG_BREAKPOINT {0, 0, 0, 0xd}
-#define PMON_LITTLE_BREAKPOINT {0xd, 0, 0, 0}
-#define IDT_BIG_BREAKPOINT {0, 0, 0x0a, 0xd}
-#define IDT_LITTLE_BREAKPOINT {0xd, 0x0a, 0, 0}
-#define MIPS16_BIG_BREAKPOINT {0xe8, 0xa5}
-#define MIPS16_LITTLE_BREAKPOINT {0xa5, 0xe8}
-
/* This function implements the BREAKPOINT_FROM_PC macro. It uses the program
counter value to determine whether a 16- or 32-bit breakpoint should be
used. It returns a pointer to a string of bytes that encode a breakpoint
{
if (pc_is_mips16 (*pcptr))
{
- static unsigned char mips16_big_breakpoint[] =
- MIPS16_BIG_BREAKPOINT;
- *pcptr = UNMAKE_MIPS16_ADDR (*pcptr);
+ static unsigned char mips16_big_breakpoint[] = {0xe8, 0xa5};
+ *pcptr = unmake_mips16_addr (*pcptr);
*lenptr = sizeof (mips16_big_breakpoint);
return mips16_big_breakpoint;
}
else
{
- static unsigned char big_breakpoint[] = BIG_BREAKPOINT;
- static unsigned char pmon_big_breakpoint[] = PMON_BIG_BREAKPOINT;
- static unsigned char idt_big_breakpoint[] = IDT_BIG_BREAKPOINT;
+ /* The IDT board uses an unusual breakpoint value, and
+ sometimes gets confused when it sees the usual MIPS
+ breakpoint instruction. */
+ static unsigned char big_breakpoint[] = {0, 0x5, 0, 0xd};
+ static unsigned char pmon_big_breakpoint[] = {0, 0, 0, 0xd};
+ static unsigned char idt_big_breakpoint[] = {0, 0, 0x0a, 0xd};
*lenptr = sizeof (big_breakpoint);
{
if (pc_is_mips16 (*pcptr))
{
- static unsigned char mips16_little_breakpoint[] =
- MIPS16_LITTLE_BREAKPOINT;
- *pcptr = UNMAKE_MIPS16_ADDR (*pcptr);
+ static unsigned char mips16_little_breakpoint[] = {0xa5, 0xe8};
+ *pcptr = unmake_mips16_addr (*pcptr);
*lenptr = sizeof (mips16_little_breakpoint);
return mips16_little_breakpoint;
}
else
{
- static unsigned char little_breakpoint[] = LITTLE_BREAKPOINT;
- static unsigned char pmon_little_breakpoint[] =
- PMON_LITTLE_BREAKPOINT;
- static unsigned char idt_little_breakpoint[] =
- IDT_LITTLE_BREAKPOINT;
+ static unsigned char little_breakpoint[] = {0xd, 0, 0x5, 0};
+ static unsigned char pmon_little_breakpoint[] = {0xd, 0, 0, 0};
+ static unsigned char idt_little_breakpoint[] = {0xd, 0x0a, 0, 0};
*lenptr = sizeof (little_breakpoint);
}
-/* Return a location where we can set a breakpoint that will be hit
- when an inferior function call returns. This is normally the
- program's entry point. Executables that don't have an entry
- point (e.g. programs in ROM) should define a symbol __CALL_DUMMY_ADDRESS
- whose address is the location where the breakpoint should be placed. */
-
-static CORE_ADDR
-mips_call_dummy_address (void)
-{
- struct minimal_symbol *sym;
-
- sym = lookup_minimal_symbol ("__CALL_DUMMY_ADDRESS", NULL, NULL);
- if (sym)
- return SYMBOL_VALUE_ADDRESS (sym);
- else
- return entry_point_address ();
-}
-
-
-/* If the current gcc for this target does not produce correct debugging
- information for float parameters, both prototyped and unprototyped, then
- define this macro. This forces gdb to always assume that floats are
- passed as doubles and then converted in the callee.
-
- For the mips chip, it appears that the debug info marks the parameters as
- floats regardless of whether the function is prototyped, but the actual
- values are passed as doubles for the non-prototyped case and floats for
- the prototyped case. Thus we choose to make the non-prototyped case work
- for C and break the prototyped case, since the non-prototyped case is
- probably much more common. (FIXME). */
-
-static int
-mips_coerce_float_to_double (struct type *formal, struct type *actual)
-{
- return current_language->la_language == language_c;
-}
-
/* When debugging a 64 MIPS target running a 32 bit ABI, the size of
the register stored on the stack (32) is different to its real raw
size (64). The below ensures that registers are fetched from the
CORE_ADDR addrx;
enum lval_type lvalx;
int optimizedx;
- int realnum;
+ int realnumx;
- if (!target_has_registers)
- error ("No registers.");
+ /* Always a pseudo. */
+ gdb_assert (regnum >= NUM_REGS);
/* Make certain that all needed parameters are present. */
if (addrp == NULL)
lvalp = &lvalx;
if (optimizedp == NULL)
optimizedp = &optimizedx;
- frame_register_unwind (get_next_frame (frame), regnum, optimizedp, lvalp,
- addrp, &realnum, raw_buffer);
- /* FIXME: cagney/2002-09-13: This is just so bad. The MIPS should
- have a pseudo register range that correspons to the ABI's, rather
- than the ISA's, view of registers. These registers would then
- implicitly describe their size and hence could be used without
- the below munging. */
- if ((*lvalp) == lval_memory)
- {
- if (raw_buffer != NULL)
- {
- if (regnum < 32)
- {
- /* Only MIPS_SAVED_REGSIZE bytes of GP registers are
- saved. */
- LONGEST val = read_memory_integer ((*addrp), MIPS_SAVED_REGSIZE);
- store_address (raw_buffer, REGISTER_RAW_SIZE (regnum), val);
- }
- }
- }
+
+ if ((regnum % NUM_REGS) == SP_REGNUM)
+ /* The SP_REGNUM is special, its value is stored in saved_regs.
+ In fact, it is so special that it can even only be fetched
+ using a raw register number! Once this code as been converted
+ to frame-unwind the problem goes away. */
+ frame_register_unwind (deprecated_get_next_frame_hack (frame),
+ regnum % NUM_REGS, optimizedp, lvalp, addrp,
+ &realnumx, raw_buffer);
+ else
+ /* Get it from the next frame. */
+ frame_register_unwind (deprecated_get_next_frame_hack (frame),
+ regnum, optimizedp, lvalp, addrp,
+ &realnumx, raw_buffer);
}
/* Immediately after a function call, return the saved pc.
}
-/* Convert a dbx stab register number (from `r' declaration) to a gdb
- REGNUM */
+/* Convert a dbx stab register number (from `r' declaration) to a GDB
+ [1 * NUM_REGS .. 2 * NUM_REGS) REGNUM. */
static int
mips_stab_reg_to_regnum (int num)
{
- if (num < 32)
- return num;
+ int regnum;
+ if (num >= 0 && num < 32)
+ regnum = num;
+ else if (num >= 38 && num < 70)
+ regnum = num + FP0_REGNUM - 38;
+ else if (num == 70)
+ regnum = HI_REGNUM;
+ else if (num == 71)
+ regnum = LO_REGNUM;
else
- return num + FP0_REGNUM - 38;
+ /* This will hopefully (eventually) provoke a warning. Should
+ we be calling complaint() here? */
+ return NUM_REGS + NUM_PSEUDO_REGS;
+ return NUM_REGS + regnum;
}
-/* Convert a ecoff register number to a gdb REGNUM */
+
+/* Convert a dwarf, dwarf2, or ecoff register number to a GDB [1 *
+ NUM_REGS .. 2 * NUM_REGS) REGNUM. */
static int
-mips_ecoff_reg_to_regnum (int num)
+mips_dwarf_dwarf2_ecoff_reg_to_regnum (int num)
{
- if (num < 32)
- return num;
+ int regnum;
+ if (num >= 0 && num < 32)
+ regnum = num;
+ else if (num >= 32 && num < 64)
+ regnum = num + FP0_REGNUM - 32;
+ else if (num == 64)
+ regnum = HI_REGNUM;
+ else if (num == 65)
+ regnum = LO_REGNUM;
else
- return num + FP0_REGNUM - 32;
+ /* This will hopefully (eventually) provoke a warning. Should we
+ be calling complaint() here? */
+ return NUM_REGS + NUM_PSEUDO_REGS;
+ return NUM_REGS + regnum;
}
+static int
+mips_register_sim_regno (int regnum)
+{
+ /* Only makes sense to supply raw registers. */
+ gdb_assert (regnum >= 0 && regnum < NUM_REGS);
+ /* FIXME: cagney/2002-05-13: Need to look at the pseudo register to
+ decide if it is valid. Should instead define a standard sim/gdb
+ register numbering scheme. */
+ if (REGISTER_NAME (NUM_REGS + regnum) != NULL
+ && REGISTER_NAME (NUM_REGS + regnum)[0] != '\0')
+ return regnum;
+ else
+ return LEGACY_SIM_REGNO_IGNORE;
+}
+
+
/* Convert an integer into an address. By first converting the value
into a pointer and then extracting it signed, the address is
guarenteed to be correctly sign extended. */
mips_gdbarch_init (struct gdbarch_info info,
struct gdbarch_list *arches)
{
- static LONGEST mips_call_dummy_words[] =
- {0};
struct gdbarch *gdbarch;
struct gdbarch_tdep *tdep;
int elf_flags;
enum mips_abi mips_abi, found_abi, wanted_abi;
- enum gdb_osabi osabi = GDB_OSABI_UNKNOWN;
-
- /* Reset the disassembly info, in case it was set to something
- non-default. */
- tm_print_insn_info.flavour = bfd_target_unknown_flavour;
- tm_print_insn_info.arch = bfd_arch_unknown;
- tm_print_insn_info.mach = 0;
+ int num_regs;
elf_flags = 0;
/* First of all, extract the elf_flags, if available. */
if (bfd_get_flavour (info.abfd) == bfd_target_elf_flavour)
elf_flags = elf_elfheader (info.abfd)->e_flags;
-
- /* Try to determine the OS ABI of the object we are loading. If
- we end up with `unknown', just leave it that way. */
- osabi = gdbarch_lookup_osabi (info.abfd);
}
/* Check ELF_FLAGS to see if it specifies the ABI being used. */
continue;
if (gdbarch_tdep (arches->gdbarch)->mips_abi != mips_abi)
continue;
- if (gdbarch_tdep (arches->gdbarch)->osabi == osabi)
- return arches->gdbarch;
+ return arches->gdbarch;
}
/* Need a new architecture. Fill in a target specific vector. */
tdep = (struct gdbarch_tdep *) xmalloc (sizeof (struct gdbarch_tdep));
gdbarch = gdbarch_alloc (&info, tdep);
tdep->elf_flags = elf_flags;
- tdep->osabi = osabi;
/* Initially set everything according to the default ABI/ISA. */
set_gdbarch_short_bit (gdbarch, 16);
set_gdbarch_float_bit (gdbarch, 32);
set_gdbarch_double_bit (gdbarch, 64);
set_gdbarch_long_double_bit (gdbarch, 64);
- set_gdbarch_register_raw_size (gdbarch, mips_register_raw_size);
- set_gdbarch_max_register_raw_size (gdbarch, 8);
- set_gdbarch_max_register_virtual_size (gdbarch, 8);
+ set_gdbarch_deprecated_register_raw_size (gdbarch, mips_register_raw_size);
+ set_gdbarch_deprecated_register_byte (gdbarch, mips_register_byte);
+ set_gdbarch_register_reggroup_p (gdbarch, mips_register_reggroup_p);
+ set_gdbarch_pseudo_register_read (gdbarch, mips_pseudo_register_read);
+ set_gdbarch_pseudo_register_write (gdbarch, mips_pseudo_register_write);
tdep->found_abi = found_abi;
tdep->mips_abi = mips_abi;
set_gdbarch_elf_make_msymbol_special (gdbarch,
mips_elf_make_msymbol_special);
- if (osabi == GDB_OSABI_IRIX)
- set_gdbarch_num_regs (gdbarch, 71);
+
+ if (info.osabi == GDB_OSABI_IRIX)
+ num_regs = 71;
else
- set_gdbarch_num_regs (gdbarch, 90);
+ num_regs = 90;
+ set_gdbarch_num_regs (gdbarch, num_regs);
+ set_gdbarch_num_pseudo_regs (gdbarch, num_regs);
switch (mips_abi)
{
case MIPS_ABI_O32:
- set_gdbarch_push_arguments (gdbarch, mips_o32_push_arguments);
+ set_gdbarch_push_dummy_call (gdbarch, mips_o32_push_dummy_call);
set_gdbarch_deprecated_store_return_value (gdbarch, mips_o32_store_return_value);
set_gdbarch_extract_return_value (gdbarch, mips_o32_extract_return_value);
tdep->mips_default_saved_regsize = 4;
set_gdbarch_long_bit (gdbarch, 32);
set_gdbarch_ptr_bit (gdbarch, 32);
set_gdbarch_long_long_bit (gdbarch, 64);
- set_gdbarch_reg_struct_has_addr (gdbarch,
- mips_o32_reg_struct_has_addr);
+ set_gdbarch_deprecated_reg_struct_has_addr
+ (gdbarch, mips_o32_reg_struct_has_addr);
set_gdbarch_use_struct_convention (gdbarch,
- mips_o32_use_struct_convention);
+ always_use_struct_convention);
break;
case MIPS_ABI_O64:
- set_gdbarch_push_arguments (gdbarch, mips_o64_push_arguments);
+ set_gdbarch_push_dummy_call (gdbarch, mips_o64_push_dummy_call);
set_gdbarch_deprecated_store_return_value (gdbarch, mips_o64_store_return_value);
set_gdbarch_deprecated_extract_return_value (gdbarch, mips_o64_extract_return_value);
tdep->mips_default_saved_regsize = 8;
set_gdbarch_long_bit (gdbarch, 32);
set_gdbarch_ptr_bit (gdbarch, 32);
set_gdbarch_long_long_bit (gdbarch, 64);
- set_gdbarch_reg_struct_has_addr (gdbarch,
- mips_o32_reg_struct_has_addr);
- set_gdbarch_use_struct_convention (gdbarch,
- mips_o32_use_struct_convention);
+ set_gdbarch_deprecated_reg_struct_has_addr
+ (gdbarch, mips_o32_reg_struct_has_addr);
+ set_gdbarch_use_struct_convention (gdbarch, always_use_struct_convention);
break;
case MIPS_ABI_EABI32:
- set_gdbarch_push_arguments (gdbarch, mips_eabi_push_arguments);
+ set_gdbarch_push_dummy_call (gdbarch, mips_eabi_push_dummy_call);
set_gdbarch_deprecated_store_return_value (gdbarch, mips_eabi_store_return_value);
set_gdbarch_deprecated_extract_return_value (gdbarch, mips_eabi_extract_return_value);
tdep->mips_default_saved_regsize = 4;
set_gdbarch_long_bit (gdbarch, 32);
set_gdbarch_ptr_bit (gdbarch, 32);
set_gdbarch_long_long_bit (gdbarch, 64);
- set_gdbarch_reg_struct_has_addr (gdbarch,
- mips_eabi_reg_struct_has_addr);
+ set_gdbarch_deprecated_reg_struct_has_addr
+ (gdbarch, mips_eabi_reg_struct_has_addr);
set_gdbarch_use_struct_convention (gdbarch,
mips_eabi_use_struct_convention);
break;
case MIPS_ABI_EABI64:
- set_gdbarch_push_arguments (gdbarch, mips_eabi_push_arguments);
+ set_gdbarch_push_dummy_call (gdbarch, mips_eabi_push_dummy_call);
set_gdbarch_deprecated_store_return_value (gdbarch, mips_eabi_store_return_value);
set_gdbarch_deprecated_extract_return_value (gdbarch, mips_eabi_extract_return_value);
tdep->mips_default_saved_regsize = 8;
set_gdbarch_long_bit (gdbarch, 64);
set_gdbarch_ptr_bit (gdbarch, 64);
set_gdbarch_long_long_bit (gdbarch, 64);
- set_gdbarch_reg_struct_has_addr (gdbarch,
- mips_eabi_reg_struct_has_addr);
+ set_gdbarch_deprecated_reg_struct_has_addr
+ (gdbarch, mips_eabi_reg_struct_has_addr);
set_gdbarch_use_struct_convention (gdbarch,
mips_eabi_use_struct_convention);
break;
case MIPS_ABI_N32:
- set_gdbarch_push_arguments (gdbarch, mips_n32n64_push_arguments);
+ set_gdbarch_push_dummy_call (gdbarch, mips_n32n64_push_dummy_call);
set_gdbarch_deprecated_store_return_value (gdbarch, mips_n32n64_store_return_value);
set_gdbarch_extract_return_value (gdbarch, mips_n32n64_extract_return_value);
tdep->mips_default_saved_regsize = 8;
set_gdbarch_long_bit (gdbarch, 32);
set_gdbarch_ptr_bit (gdbarch, 32);
set_gdbarch_long_long_bit (gdbarch, 64);
-
- /* Set up the disassembler info, so that we get the right
- register names from libopcodes. */
- tm_print_insn_info.flavour = bfd_target_elf_flavour;
- tm_print_insn_info.arch = bfd_arch_mips;
- if (info.bfd_arch_info != NULL
- && info.bfd_arch_info->arch == bfd_arch_mips
- && info.bfd_arch_info->mach)
- tm_print_insn_info.mach = info.bfd_arch_info->mach;
- else
- tm_print_insn_info.mach = bfd_mach_mips8000;
-
set_gdbarch_use_struct_convention (gdbarch,
mips_n32n64_use_struct_convention);
- set_gdbarch_reg_struct_has_addr (gdbarch,
- mips_n32n64_reg_struct_has_addr);
+ set_gdbarch_deprecated_reg_struct_has_addr
+ (gdbarch, mips_n32n64_reg_struct_has_addr);
break;
case MIPS_ABI_N64:
- set_gdbarch_push_arguments (gdbarch, mips_n32n64_push_arguments);
+ set_gdbarch_push_dummy_call (gdbarch, mips_n32n64_push_dummy_call);
set_gdbarch_deprecated_store_return_value (gdbarch, mips_n32n64_store_return_value);
set_gdbarch_extract_return_value (gdbarch, mips_n32n64_extract_return_value);
tdep->mips_default_saved_regsize = 8;
set_gdbarch_long_bit (gdbarch, 64);
set_gdbarch_ptr_bit (gdbarch, 64);
set_gdbarch_long_long_bit (gdbarch, 64);
-
- /* Set up the disassembler info, so that we get the right
- register names from libopcodes. */
- tm_print_insn_info.flavour = bfd_target_elf_flavour;
- tm_print_insn_info.arch = bfd_arch_mips;
- if (info.bfd_arch_info != NULL
- && info.bfd_arch_info->arch == bfd_arch_mips
- && info.bfd_arch_info->mach)
- tm_print_insn_info.mach = info.bfd_arch_info->mach;
- else
- tm_print_insn_info.mach = bfd_mach_mips8000;
-
set_gdbarch_use_struct_convention (gdbarch,
mips_n32n64_use_struct_convention);
- set_gdbarch_reg_struct_has_addr (gdbarch,
- mips_n32n64_reg_struct_has_addr);
+ set_gdbarch_deprecated_reg_struct_has_addr
+ (gdbarch, mips_n32n64_reg_struct_has_addr);
break;
default:
internal_error (__FILE__, __LINE__,
/* MIPS version of register names. NOTE: At present the MIPS
register name management is part way between the old -
- #undef/#define REGISTER_NAMES and the new REGISTER_NAME(nr).
+ #undef/#define MIPS_REGISTER_NAMES and the new REGISTER_NAME(nr).
Further work on it is required. */
- /* NOTE: many targets (esp. embedded) do not go thru the
- gdbarch_register_name vector at all, instead bypassing it
- by defining REGISTER_NAMES. */
set_gdbarch_register_name (gdbarch, mips_register_name);
set_gdbarch_read_pc (gdbarch, mips_read_pc);
set_gdbarch_write_pc (gdbarch, generic_target_write_pc);
- set_gdbarch_read_fp (gdbarch, mips_read_sp); /* Draft FRAME base. */
+ set_gdbarch_deprecated_target_read_fp (gdbarch, mips_read_sp); /* Draft FRAME base. */
set_gdbarch_read_sp (gdbarch, mips_read_sp);
- set_gdbarch_write_sp (gdbarch, generic_target_write_sp);
/* Add/remove bits from an address. The MIPS needs be careful to
ensure that all 32 bit addresses are sign extended to 64 bits. */
/* There's a mess in stack frame creation. See comments in
blockframe.c near reference to DEPRECATED_INIT_FRAME_PC_FIRST. */
set_gdbarch_deprecated_init_frame_pc_first (gdbarch, mips_init_frame_pc_first);
- set_gdbarch_deprecated_init_frame_pc (gdbarch, init_frame_pc_noop);
/* Map debug register numbers onto internal register numbers. */
set_gdbarch_stab_reg_to_regnum (gdbarch, mips_stab_reg_to_regnum);
- set_gdbarch_ecoff_reg_to_regnum (gdbarch, mips_ecoff_reg_to_regnum);
+ set_gdbarch_ecoff_reg_to_regnum (gdbarch, mips_dwarf_dwarf2_ecoff_reg_to_regnum);
+ set_gdbarch_dwarf_reg_to_regnum (gdbarch, mips_dwarf_dwarf2_ecoff_reg_to_regnum);
+ set_gdbarch_dwarf2_reg_to_regnum (gdbarch, mips_dwarf_dwarf2_ecoff_reg_to_regnum);
+ set_gdbarch_register_sim_regno (gdbarch, mips_register_sim_regno);
/* Initialize a frame */
- set_gdbarch_init_extra_frame_info (gdbarch, mips_init_extra_frame_info);
- set_gdbarch_frame_init_saved_regs (gdbarch, mips_frame_init_saved_regs);
+ set_gdbarch_deprecated_frame_init_saved_regs (gdbarch, mips_find_saved_regs);
+ set_gdbarch_deprecated_init_extra_frame_info (gdbarch, mips_init_extra_frame_info);
/* MIPS version of CALL_DUMMY */
- set_gdbarch_call_dummy_p (gdbarch, 1);
- set_gdbarch_call_dummy_stack_adjust_p (gdbarch, 0);
- set_gdbarch_call_dummy_address (gdbarch, mips_call_dummy_address);
- set_gdbarch_push_return_address (gdbarch, mips_push_return_address);
- set_gdbarch_push_dummy_frame (gdbarch, generic_push_dummy_frame);
- set_gdbarch_pop_frame (gdbarch, mips_pop_frame);
- set_gdbarch_call_dummy_start_offset (gdbarch, 0);
- set_gdbarch_call_dummy_breakpoint_offset_p (gdbarch, 1);
- set_gdbarch_call_dummy_breakpoint_offset (gdbarch, 0);
- set_gdbarch_call_dummy_length (gdbarch, 0);
- set_gdbarch_fix_call_dummy (gdbarch, mips_fix_call_dummy);
- set_gdbarch_call_dummy_words (gdbarch, mips_call_dummy_words);
- set_gdbarch_sizeof_call_dummy_words (gdbarch, sizeof (mips_call_dummy_words));
- set_gdbarch_push_return_address (gdbarch, mips_push_return_address);
+ /* NOTE: cagney/2003-08-05: Eventually call dummy location will be
+ replaced by a command, and all targets will default to on stack
+ (regardless of the stack's execute status). */
+ set_gdbarch_call_dummy_location (gdbarch, AT_SYMBOL);
+ set_gdbarch_deprecated_pop_frame (gdbarch, mips_pop_frame);
set_gdbarch_frame_align (gdbarch, mips_frame_align);
- set_gdbarch_save_dummy_frame_tos (gdbarch, generic_save_dummy_frame_tos);
- set_gdbarch_register_convertible (gdbarch, mips_register_convertible);
- set_gdbarch_register_convert_to_virtual (gdbarch,
- mips_register_convert_to_virtual);
- set_gdbarch_register_convert_to_raw (gdbarch,
- mips_register_convert_to_raw);
-
- set_gdbarch_coerce_float_to_double (gdbarch, mips_coerce_float_to_double);
+ set_gdbarch_deprecated_save_dummy_frame_tos (gdbarch, generic_save_dummy_frame_tos);
+ set_gdbarch_deprecated_register_convertible (gdbarch, mips_register_convertible);
+ set_gdbarch_deprecated_register_convert_to_virtual (gdbarch, mips_register_convert_to_virtual);
+ set_gdbarch_deprecated_register_convert_to_raw (gdbarch, mips_register_convert_to_raw);
- set_gdbarch_frame_chain (gdbarch, mips_frame_chain);
- set_gdbarch_frame_chain_valid (gdbarch, func_frame_chain_valid);
+ set_gdbarch_deprecated_frame_chain (gdbarch, mips_frame_chain);
set_gdbarch_frameless_function_invocation (gdbarch,
generic_frameless_function_invocation_not);
- set_gdbarch_frame_saved_pc (gdbarch, mips_frame_saved_pc);
- set_gdbarch_frame_num_args (gdbarch, frame_num_args_unknown);
+ set_gdbarch_deprecated_frame_saved_pc (gdbarch, mips_frame_saved_pc);
set_gdbarch_frame_args_skip (gdbarch, 0);
- set_gdbarch_get_saved_register (gdbarch, mips_get_saved_register);
+ set_gdbarch_deprecated_get_saved_register (gdbarch, mips_get_saved_register);
set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
set_gdbarch_breakpoint_from_pc (gdbarch, mips_breakpoint_from_pc);
set_gdbarch_decr_pc_after_break (gdbarch, 0);
set_gdbarch_skip_prologue (gdbarch, mips_skip_prologue);
- set_gdbarch_saved_pc_after_call (gdbarch, mips_saved_pc_after_call);
+ set_gdbarch_deprecated_saved_pc_after_call (gdbarch, mips_saved_pc_after_call);
set_gdbarch_pointer_to_address (gdbarch, signed_pointer_to_address);
set_gdbarch_address_to_pointer (gdbarch, address_to_signed_pointer);
set_gdbarch_function_start_offset (gdbarch, 0);
- /* There are MIPS targets which do not yet use this since they still
- define REGISTER_VIRTUAL_TYPE. */
- set_gdbarch_register_virtual_type (gdbarch, mips_register_virtual_type);
- set_gdbarch_register_virtual_size (gdbarch, generic_register_size);
+ set_gdbarch_register_type (gdbarch, mips_register_type);
- set_gdbarch_deprecated_do_registers_info (gdbarch, mips_do_registers_info);
+ set_gdbarch_print_registers_info (gdbarch, mips_print_registers_info);
set_gdbarch_pc_in_sigtramp (gdbarch, mips_pc_in_sigtramp);
+ set_gdbarch_print_insn (gdbarch, gdb_print_insn_mips);
+
+ /* FIXME: cagney/2003-08-29: The macros HAVE_STEPPABLE_WATCHPOINT,
+ HAVE_NONSTEPPABLE_WATCHPOINT, and HAVE_CONTINUABLE_WATCHPOINT
+ need to all be folded into the target vector. Since they are
+ being used as guards for STOPPED_BY_WATCHPOINT, why not have
+ STOPPED_BY_WATCHPOINT return the type of watchpoint that the code
+ is sitting on? */
+ set_gdbarch_have_nonsteppable_watchpoint (gdbarch, 1);
+
/* Hook in OS ABI-specific overrides, if they have been registered. */
- gdbarch_init_osabi (info, gdbarch, osabi);
+ gdbarch_init_osabi (info, gdbarch);
- set_gdbarch_store_struct_return (gdbarch, mips_store_struct_return);
set_gdbarch_extract_struct_value_address (gdbarch,
mips_extract_struct_value_address);
gdbarch_update_p (info);
}
+/* Print out which MIPS ABI is in use. */
+
+static void
+show_mips_abi (char *ignore_args, int from_tty)
+{
+ if (gdbarch_bfd_arch_info (current_gdbarch)->arch != bfd_arch_mips)
+ printf_filtered (
+ "The MIPS ABI is unknown because the current architecture is not MIPS.\n");
+ else
+ {
+ enum mips_abi global_abi = global_mips_abi ();
+ enum mips_abi actual_abi = mips_abi (current_gdbarch);
+ const char *actual_abi_str = mips_abi_strings[actual_abi];
+
+ if (global_abi == MIPS_ABI_UNKNOWN)
+ printf_filtered ("The MIPS ABI is set automatically (currently \"%s\").\n",
+ actual_abi_str);
+ else if (global_abi == actual_abi)
+ printf_filtered (
+ "The MIPS ABI is assumed to be \"%s\" (due to user setting).\n",
+ actual_abi_str);
+ else
+ {
+ /* Probably shouldn't happen... */
+ printf_filtered (
+ "The (auto detected) MIPS ABI \"%s\" is in use even though the user setting was \"%s\".\n",
+ actual_abi_str,
+ mips_abi_strings[global_abi]);
+ }
+ }
+}
+
static void
mips_dump_tdep (struct gdbarch *current_gdbarch, struct ui_file *file)
{
fprintf_unfiltered (file,
"mips_dump_tdep: BADVADDR_REGNUM = %d\n",
BADVADDR_REGNUM);
- fprintf_unfiltered (file,
- "mips_dump_tdep: BIG_BREAKPOINT = delete?\n");
fprintf_unfiltered (file,
"mips_dump_tdep: CAUSE_REGNUM = %d\n",
CAUSE_REGNUM);
fprintf_unfiltered (file,
"mips_dump_tdep: GDB_TARGET_IS_MIPS64 = %d\n",
GDB_TARGET_IS_MIPS64);
- fprintf_unfiltered (file,
- "mips_dump_tdep: GEN_REG_SAVE_MASK = %d\n",
- GEN_REG_SAVE_MASK);
- fprintf_unfiltered (file,
- "mips_dump_tdep: HAVE_NONSTEPPABLE_WATCHPOINT # %s\n",
- XSTRING (HAVE_NONSTEPPABLE_WATCHPOINT));
fprintf_unfiltered (file,
"mips_dump_tdep: HI_REGNUM = %d\n",
HI_REGNUM);
- fprintf_unfiltered (file,
- "mips_dump_tdep: IDT_BIG_BREAKPOINT = delete?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: IDT_LITTLE_BREAKPOINT = delete?\n");
fprintf_unfiltered (file,
"mips_dump_tdep: IGNORE_HELPER_CALL # %s\n",
XSTRING (IGNORE_HELPER_CALL (PC)));
fprintf_unfiltered (file,
"mips_dump_tdep: IN_SOLIB_RETURN_TRAMPOLINE # %s\n",
XSTRING (IN_SOLIB_RETURN_TRAMPOLINE (PC, NAME)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: IS_MIPS16_ADDR = FIXME!\n");
fprintf_unfiltered (file,
"mips_dump_tdep: LAST_EMBED_REGNUM = %d\n",
LAST_EMBED_REGNUM);
- fprintf_unfiltered (file,
- "mips_dump_tdep: LITTLE_BREAKPOINT = delete?\n");
fprintf_unfiltered (file,
"mips_dump_tdep: LO_REGNUM = %d\n",
LO_REGNUM);
"mips_dump_tdep: MACHINE_CPROC_SP_OFFSET = %d\n",
MACHINE_CPROC_SP_OFFSET);
#endif
- fprintf_unfiltered (file,
- "mips_dump_tdep: MAKE_MIPS16_ADDR = FIXME!\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS16_BIG_BREAKPOINT = delete?\n");
fprintf_unfiltered (file,
"mips_dump_tdep: MIPS16_INSTLEN = %d\n",
MIPS16_INSTLEN);
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS16_LITTLE_BREAKPOINT = delete?\n");
fprintf_unfiltered (file,
"mips_dump_tdep: MIPS_DEFAULT_ABI = FIXME!\n");
fprintf_unfiltered (file,
"mips_dump_tdep: OP_LDFPR = used?\n");
fprintf_unfiltered (file,
"mips_dump_tdep: OP_LDGPR = used?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PMON_BIG_BREAKPOINT = delete?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PMON_LITTLE_BREAKPOINT = delete?\n");
fprintf_unfiltered (file,
"mips_dump_tdep: PRID_REGNUM = %d\n",
PRID_REGNUM);
fprintf_unfiltered (file,
"mips_dump_tdep: PS_REGNUM = %d\n",
PS_REGNUM);
- fprintf_unfiltered (file,
- "mips_dump_tdep: PUSH_FP_REGNUM = %d\n",
- PUSH_FP_REGNUM);
fprintf_unfiltered (file,
"mips_dump_tdep: RA_REGNUM = %d\n",
RA_REGNUM);
- fprintf_unfiltered (file,
- "mips_dump_tdep: REGISTER_CONVERT_FROM_TYPE # %s\n",
- XSTRING (REGISTER_CONVERT_FROM_TYPE (REGNUM, VALTYPE, RAW_BUFFER)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: REGISTER_CONVERT_TO_TYPE # %s\n",
- XSTRING (REGISTER_CONVERT_TO_TYPE (REGNUM, VALTYPE, RAW_BUFFER)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: REGISTER_NAMES = delete?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: ROUND_DOWN = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: ROUND_UP = function?\n");
#ifdef SAVED_BYTES
fprintf_unfiltered (file,
"mips_dump_tdep: SAVED_BYTES = %d\n",
fprintf_unfiltered (file,
"mips_dump_tdep: TARGET_HAS_HARDWARE_WATCHPOINTS # %s\n",
XSTRING (TARGET_HAS_HARDWARE_WATCHPOINTS));
- fprintf_unfiltered (file,
- "mips_dump_tdep: TARGET_MIPS = used?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: TM_PRINT_INSN_MACH # %s\n",
- XSTRING (TM_PRINT_INSN_MACH));
#ifdef TRACE_CLEAR
fprintf_unfiltered (file,
"mips_dump_tdep: TRACE_CLEAR # %s\n",
"mips_dump_tdep: TRACE_SET # %s\n",
XSTRING (TRACE_SET (X,STATE)));
#endif
- fprintf_unfiltered (file,
- "mips_dump_tdep: UNMAKE_MIPS16_ADDR = function?\n");
#ifdef UNUSED_REGNUM
fprintf_unfiltered (file,
"mips_dump_tdep: UNUSED_REGNUM = %d\n",
fprintf_unfiltered (file,
"mips_dump_tdep: _PROC_MAGIC_ = %d\n",
_PROC_MAGIC_);
-
- fprintf_unfiltered (file,
- "mips_dump_tdep: OS ABI = %s\n",
- gdbarch_osabi_name (tdep->osabi));
}
+extern initialize_file_ftype _initialize_mips_tdep; /* -Wmissing-prototypes */
+
void
_initialize_mips_tdep (void)
{
internal_error (__FILE__, __LINE__, "mips_abi_strings out of sync");
gdbarch_register (bfd_arch_mips, mips_gdbarch_init, mips_dump_tdep);
- if (!tm_print_insn) /* Someone may have already set it */
- tm_print_insn = gdb_print_insn_mips;
/* Add root prefix command for all "set mips"/"show mips" commands */
add_prefix_cmd ("mips", no_class, set_mips_command,
" eabi32\n"
" eabi64",
&setmipscmdlist);
- add_show_from_set (c, &showmipscmdlist);
set_cmd_sfunc (c, mips_abi_update);
+ add_cmd ("abi", class_obscure, show_mips_abi,
+ "Show ABI in use by MIPS target", &showmipscmdlist);
/* Let the user turn off floating point and set the fence post for
heuristic_proc_start. */
projects / deliverable / binutils-gdb.git / blobdiff