/* Target-dependent code for the MIPS architecture, for GDB, the GNU Debugger.
- Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994
+ Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996
Free Software Foundation, Inc.
Contributed by Alessandro Forin(af@cs.cmu.edu) at CMU
and by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include "defs.h"
+#include "gdb_string.h"
#include "frame.h"
#include "inferior.h"
#include "symtab.h"
#include "gdbcore.h"
#include "symfile.h"
#include "objfiles.h"
+#include "gdbtypes.h"
+#include "target.h"
#include "opcode/mips.h"
-#define VM_MIN_ADDRESS (unsigned)0x400000
-\f
+#define VM_MIN_ADDRESS (CORE_ADDR)0x400000
+
+/* FIXME: Put this declaration in frame.h. */
+extern struct obstack frame_cache_obstack;
+
#if 0
static int mips_in_lenient_prologue PARAMS ((CORE_ADDR, CORE_ADDR));
#endif
+static int gdb_print_insn_mips PARAMS ((bfd_vma, disassemble_info *));
+
+static void mips_print_register PARAMS ((int, int));
+
+static mips_extra_func_info_t
+heuristic_proc_desc PARAMS ((CORE_ADDR, CORE_ADDR, struct frame_info *));
+
+static CORE_ADDR heuristic_proc_start PARAMS ((CORE_ADDR));
+
+static CORE_ADDR read_next_frame_reg PARAMS ((struct frame_info *, int));
+
+static void mips_set_fpu_command PARAMS ((char *, int,
+ struct cmd_list_element *));
+
+static void mips_show_fpu_command PARAMS ((char *, int,
+ struct cmd_list_element *));
+
+void mips_set_processor_type_command PARAMS ((char *, int));
+
+int mips_set_processor_type PARAMS ((char *));
+
+static void mips_show_processor_type_command PARAMS ((char *, int));
+
+static void reinit_frame_cache_sfunc PARAMS ((char *, int,
+ struct cmd_list_element *));
+
+static mips_extra_func_info_t
+ find_proc_desc PARAMS ((CORE_ADDR pc, struct frame_info *next_frame));
+
+static CORE_ADDR after_prologue PARAMS ((CORE_ADDR pc,
+ mips_extra_func_info_t proc_desc));
+
+/* This value is the model of MIPS in use. It is derived from the value
+ of the PrID register. */
+
+char *mips_processor_type;
+
+char *tmp_mips_processor_type;
+
/* Some MIPS boards don't support floating point, so we permit the
user to turn it off. */
-int mips_fpu = 1;
+
+enum mips_fpu_type mips_fpu;
+
+static char *mips_fpu_string;
+
+/* A set of original names, to be used when restoring back to generic
+ registers from a specific set. */
+
+char *mips_generic_reg_names[] = REGISTER_NAMES;
+
+/* Names of IDT R3041 registers. */
+
+char *mips_r3041_reg_names[] = {
+ "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
+ "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7",
+ "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
+ "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra",
+ "sr", "lo", "hi", "bad", "cause","pc",
+ "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
+ "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
+ "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
+ "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
+ "fsr", "fir", "fp", "",
+ "", "", "bus", "ccfg", "", "", "", "",
+ "", "", "port", "cmp", "", "", "epc", "prid",
+};
+
+/* Names of IDT R3051 registers. */
+
+char *mips_r3051_reg_names[] = {
+ "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
+ "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7",
+ "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
+ "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra",
+ "sr", "lo", "hi", "bad", "cause","pc",
+ "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
+ "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
+ "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
+ "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
+ "fsr", "fir", "fp", "",
+ "inx", "rand", "elo", "", "ctxt", "", "", "",
+ "", "", "ehi", "", "", "", "epc", "prid",
+};
+
+/* Names of IDT R3081 registers. */
+
+char *mips_r3081_reg_names[] = {
+ "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
+ "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7",
+ "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
+ "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra",
+ "sr", "lo", "hi", "bad", "cause","pc",
+ "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
+ "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
+ "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
+ "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
+ "fsr", "fir", "fp", "",
+ "inx", "rand", "elo", "cfg", "ctxt", "", "", "",
+ "", "", "ehi", "", "", "", "epc", "prid",
+};
+
+/* Names of LSI 33k registers. */
+
+char *mips_lsi33k_reg_names[] = {
+ "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
+ "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7",
+ "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
+ "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra",
+ "epc", "hi", "lo", "sr", "cause","badvaddr",
+ "dcic", "bpc", "bda", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+};
+
+struct {
+ char *name;
+ char **regnames;
+} mips_processor_type_table[] = {
+ { "generic", mips_generic_reg_names },
+ { "r3041", mips_r3041_reg_names },
+ { "r3051", mips_r3051_reg_names },
+ { "r3071", mips_r3081_reg_names },
+ { "r3081", mips_r3081_reg_names },
+ { "lsi33k", mips_lsi33k_reg_names },
+ { NULL, NULL }
+};
+
+/* Table to translate MIPS16 register field to actual register number. */
+static int mips16_to_32_reg[8] = { 16, 17, 2, 3, 4, 5, 6, 7 };
/* Heuristic_proc_start may hunt through the text section for a long
time across a 2400 baud serial line. Allows the user to limit this
search. */
+
static unsigned int heuristic_fence_post = 0;
#define PROC_LOW_ADDR(proc) ((proc)->pdr.adr) /* least address */
-#define PROC_HIGH_ADDR(proc) ((proc)->pdr.iline) /* upper address bound */
+#define PROC_HIGH_ADDR(proc) ((proc)->high_addr) /* upper address bound */
#define PROC_FRAME_OFFSET(proc) ((proc)->pdr.frameoffset)
#define PROC_FRAME_REG(proc) ((proc)->pdr.framereg)
#define PROC_REG_MASK(proc) ((proc)->pdr.regmask)
struct linked_proc_info *next;
} *linked_proc_desc_table = NULL;
-\f
-#define READ_FRAME_REG(fi, regno) read_next_frame_reg((fi)->next, regno)
-static int
-read_next_frame_reg(fi, regno)
- FRAME fi;
- int regno;
+/* This returns the PC of the first inst after the prologue. If we can't
+ find the prologue, then return 0. */
+
+static CORE_ADDR
+after_prologue (pc, proc_desc)
+ CORE_ADDR pc;
+ mips_extra_func_info_t proc_desc;
+{
+ struct symtab_and_line sal;
+ CORE_ADDR func_addr, func_end;
+
+ if (!proc_desc)
+ proc_desc = find_proc_desc (pc, NULL);
+
+ if (proc_desc)
+ {
+ /* If function is frameless, then we need to do it the hard way. I
+ strongly suspect that frameless always means prologueless... */
+ if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
+ && PROC_FRAME_OFFSET (proc_desc) == 0)
+ return 0;
+ }
+
+ if (!find_pc_partial_function (pc, NULL, &func_addr, &func_end))
+ return 0; /* Unknown */
+
+ sal = find_pc_line (func_addr, 0);
+
+ if (sal.end < func_end)
+ return sal.end;
+
+ /* The line after the prologue is after the end of the function. In this
+ case, tell the caller to find the prologue the hard way. */
+
+ return 0;
+}
+
+/* Decode a MIPS32 instruction that saves a register in the stack, and
+ set the appropriate bit in the general register mask or float register mask
+ to indicate which register is saved. This is a helper function
+ for mips_find_saved_regs. */
+
+static void
+mips32_decode_reg_save (inst, gen_mask, float_mask)
+ t_inst inst;
+ unsigned long *gen_mask;
+ unsigned long *float_mask;
+{
+ int reg;
+
+ if ((inst & 0xffe00000) == 0xafa00000 /* sw reg,n($sp) */
+ || (inst & 0xffe00000) == 0xafc00000 /* sw reg,n($r30) */
+ || (inst & 0xffe00000) == 0xffa00000) /* sd reg,n($sp) */
+ {
+ /* It might be possible to use the instruction to
+ find the offset, rather than the code below which
+ is based on things being in a certain order in the
+ frame, but figuring out what the instruction's offset
+ is relative to might be a little tricky. */
+ reg = (inst & 0x001f0000) >> 16;
+ *gen_mask |= (1 << reg);
+ }
+ else if ((inst & 0xffe00000) == 0xe7a00000 /* swc1 freg,n($sp) */
+ || (inst & 0xffe00000) == 0xe7c00000 /* swc1 freg,n($r30) */
+ || (inst & 0xffe00000) == 0xf7a00000)/* sdc1 freg,n($sp) */
+
+ {
+ reg = ((inst & 0x001f0000) >> 16);
+ *float_mask |= (1 << reg);
+ }
+}
+
+/* Decode a MIPS16 instruction that saves a register in the stack, and
+ set the appropriate bit in the general register or float register mask
+ to indicate which register is saved. This is a helper function
+ for mips_find_saved_regs. */
+
+static void
+mips16_decode_reg_save (inst, gen_mask)
+ t_inst inst;
+ unsigned long *gen_mask;
+{
+ if ((inst & 0xf800) == 0xd000) /* sw reg,n($sp) */
+ {
+ int reg = mips16_to_32_reg[(inst & 0x700) >> 8];
+ *gen_mask |= (1 << reg);
+ }
+ else if ((inst & 0xff00) == 0xf900) /* sd reg,n($sp) */
+ {
+ int reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
+ *gen_mask |= (1 << reg);
+ }
+ else if ((inst & 0xff00) == 0x6200 /* sw $ra,n($sp) */
+ || (inst & 0xff00) == 0xfa00) /* sd $ra,n($sp) */
+ *gen_mask |= (1 << 31);
+}
+
+
+/* Fetch and return instruction from the specified location. If the PC
+ is odd, assume it's a MIPS16 instruction; otherwise MIPS32. */
+
+static t_inst
+mips_fetch_instruction (addr)
+ CORE_ADDR addr;
+{
+ char buf[MIPS_INSTLEN];
+ int instlen;
+ int status;
+
+ if (IS_MIPS16_ADDR (addr))
+ {
+ instlen = MIPS16_INSTLEN;
+ addr = UNMAKE_MIPS16_ADDR (addr);
+ }
+ else
+ instlen = MIPS_INSTLEN;
+ status = read_memory_nobpt (addr, buf, instlen);
+ if (status)
+ memory_error (status, addr);
+ return extract_unsigned_integer (buf, instlen);
+}
+
+
+/* Guaranteed to set fci->saved_regs to some values (it never leaves it
+ NULL). */
+
+void
+mips_find_saved_regs (fci)
+ struct frame_info *fci;
{
- /* If it is the frame for sigtramp we have a complete sigcontext
- somewhere above the frame and we get the saved registers from there.
+ int ireg;
+ CORE_ADDR reg_position;
+ /* r0 bit means kernel trap */
+ int kernel_trap;
+ /* What registers have been saved? Bitmasks. */
+ unsigned long gen_mask, float_mask;
+ mips_extra_func_info_t proc_desc;
+ t_inst inst;
+
+ fci->saved_regs = (struct frame_saved_regs *)
+ obstack_alloc (&frame_cache_obstack, sizeof(struct frame_saved_regs));
+ memset (fci->saved_regs, 0, sizeof (struct frame_saved_regs));
+
+ /* If it is the frame for sigtramp, the saved registers are located
+ in a sigcontext structure somewhere on the stack.
If the stack layout for sigtramp changes we might have to change these
constants and the companion fixup_sigtramp in mdebugread.c */
#ifndef SIGFRAME_BASE
-/* To satisfy alignment restrictions the sigcontext is located 4 bytes
+/* To satisfy alignment restrictions, sigcontext is located 4 bytes
above the sigtramp frame. */
-#define SIGFRAME_BASE 4
-#define SIGFRAME_PC_OFF (SIGFRAME_BASE + 2 * 4)
-#define SIGFRAME_REGSAVE_OFF (SIGFRAME_BASE + 3 * 4)
+#define SIGFRAME_BASE MIPS_REGSIZE
+/* FIXME! Are these correct?? */
+#define SIGFRAME_PC_OFF (SIGFRAME_BASE + 2 * MIPS_REGSIZE)
+#define SIGFRAME_REGSAVE_OFF (SIGFRAME_BASE + 3 * MIPS_REGSIZE)
+#define SIGFRAME_FPREGSAVE_OFF \
+ (SIGFRAME_REGSAVE_OFF + MIPS_NUMREGS * MIPS_REGSIZE + 3 * MIPS_REGSIZE)
#endif
#ifndef SIGFRAME_REG_SIZE
-#define SIGFRAME_REG_SIZE 4
+/* FIXME! Is this correct?? */
+#define SIGFRAME_REG_SIZE MIPS_REGSIZE
#endif
- for (; fi; fi = fi->next)
- if (fi->signal_handler_caller) {
- int offset;
- if (regno == PC_REGNUM) offset = SIGFRAME_PC_OFF;
- else if (regno < 32) offset = (SIGFRAME_REGSAVE_OFF
- + regno * SIGFRAME_REG_SIZE);
- else return 0;
- return read_memory_integer(fi->frame + offset, 4);
+ if (fci->signal_handler_caller)
+ {
+ for (ireg = 0; ireg < MIPS_NUMREGS; ireg++)
+ {
+ reg_position = fci->frame + SIGFRAME_REGSAVE_OFF
+ + ireg * SIGFRAME_REG_SIZE;
+ fci->saved_regs->regs[ireg] = reg_position;
+ }
+ for (ireg = 0; ireg < MIPS_NUMREGS; ireg++)
+ {
+ reg_position = fci->frame + SIGFRAME_FPREGSAVE_OFF
+ + ireg * SIGFRAME_REG_SIZE;
+ fci->saved_regs->regs[FP0_REGNUM + ireg] = reg_position;
+ }
+ fci->saved_regs->regs[PC_REGNUM] = fci->frame + SIGFRAME_PC_OFF;
+ return;
+ }
+
+ proc_desc = fci->proc_desc;
+ if (proc_desc == NULL)
+ /* I'm not sure how/whether this can happen. Normally when we can't
+ find a proc_desc, we "synthesize" one using heuristic_proc_desc
+ and set the saved_regs right away. */
+ return;
+
+ kernel_trap = PROC_REG_MASK(proc_desc) & 1;
+ gen_mask = kernel_trap ? 0xFFFFFFFF : PROC_REG_MASK(proc_desc);
+ float_mask = kernel_trap ? 0xFFFFFFFF : PROC_FREG_MASK(proc_desc);
+
+ if (/* In any frame other than the innermost or a frame interrupted by
+ a signal, we assume that all registers have been saved.
+ This assumes that all register saves in a function happen before
+ the first function call. */
+ (fci->next == NULL || fci->next->signal_handler_caller)
+
+ /* In a dummy frame we know exactly where things are saved. */
+ && !PROC_DESC_IS_DUMMY (proc_desc)
+
+ /* Don't bother unless we are inside a function prologue. Outside the
+ prologue, we know where everything is. */
+
+ && in_prologue (fci->pc, PROC_LOW_ADDR (proc_desc))
+
+ /* Not sure exactly what kernel_trap means, but if it means
+ the kernel saves the registers without a prologue doing it,
+ we better not examine the prologue to see whether registers
+ have been saved yet. */
+ && !kernel_trap)
+ {
+ /* We need to figure out whether the registers that the proc_desc
+ claims are saved have been saved yet. */
+
+ CORE_ADDR addr;
+
+ /* Bitmasks; set if we have found a save for the register. */
+ unsigned long gen_save_found = 0;
+ unsigned long float_save_found = 0;
+ int instlen;
+
+ /* If the address is odd, assume this is MIPS16 code. */
+ addr = PROC_LOW_ADDR (proc_desc);
+ instlen = IS_MIPS16_ADDR (addr) ? MIPS16_INSTLEN : MIPS_INSTLEN;
+
+ /* Scan through this function's instructions preceding the current
+ PC, and look for those that save registers. */
+ while (addr < fci->pc)
+ {
+ inst = mips_fetch_instruction (addr);
+ if (IS_MIPS16_ADDR (addr))
+ mips16_decode_reg_save (inst, &gen_save_found);
+ else
+ mips32_decode_reg_save (inst, &gen_save_found, &float_save_found);
+ addr += instlen;
+ }
+ gen_mask = gen_save_found;
+ float_mask = float_save_found;
+ }
+
+ /* Fill in the offsets for the registers which gen_mask says
+ were saved. */
+ reg_position = fci->frame + PROC_REG_OFFSET (proc_desc);
+ for (ireg= MIPS_NUMREGS-1; gen_mask; --ireg, gen_mask <<= 1)
+ if (gen_mask & 0x80000000)
+ {
+ fci->saved_regs->regs[ireg] = reg_position;
+ reg_position -= MIPS_REGSIZE;
+ }
+
+ /* The MIPS16 entry instruction saves $s0 and $s1 in the reverse order
+ of that normally used by gcc. Therefore, we have to fetch the first
+ instruction of the function, and if it's an entry instruction that
+ saves $s0 or $s1, correct their saved addresses. */
+ if (IS_MIPS16_ADDR (PROC_LOW_ADDR (proc_desc)))
+ {
+ inst = mips_fetch_instruction (PROC_LOW_ADDR (proc_desc));
+ if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
+ {
+ int reg;
+ int sreg_count = (inst >> 6) & 3;
+
+ /* Check if the ra register was pushed on the stack. */
+ reg_position = fci->frame + PROC_REG_OFFSET (proc_desc);
+ if (inst & 0x20)
+ reg_position -= MIPS_REGSIZE;
+
+ /* Check if the s0 and s1 registers were pushed on the stack. */
+ for (reg = 16; reg < sreg_count+16; reg++)
+ {
+ fci->saved_regs->regs[reg] = reg_position;
+ reg_position -= MIPS_REGSIZE;
+ }
+ }
+ }
+
+ /* Fill in the offsets for the registers which float_mask says
+ were saved. */
+ reg_position = fci->frame + PROC_FREG_OFFSET (proc_desc);
+
+ /* The freg_offset points to where the first *double* register
+ is saved. So skip to the high-order word. */
+ if (! GDB_TARGET_IS_MIPS64)
+ reg_position += MIPS_REGSIZE;
+
+ /* Fill in the offsets for the float registers which float_mask says
+ were saved. */
+ for (ireg = MIPS_NUMREGS-1; float_mask; --ireg, float_mask <<= 1)
+ if (float_mask & 0x80000000)
+ {
+ fci->saved_regs->regs[FP0_REGNUM+ireg] = reg_position;
+ reg_position -= MIPS_REGSIZE;
}
- else if (regno == SP_REGNUM) return fi->frame;
- else if (fi->saved_regs->regs[regno])
- return read_memory_integer(fi->saved_regs->regs[regno], 4);
- return read_register(regno);
+
+ fci->saved_regs->regs[PC_REGNUM] = fci->saved_regs->regs[RA_REGNUM];
}
-int
+static CORE_ADDR
+read_next_frame_reg(fi, regno)
+ struct frame_info *fi;
+ int regno;
+{
+ for (; fi; fi = fi->next)
+ {
+ /* We have to get the saved sp from the sigcontext
+ if it is a signal handler frame. */
+ if (regno == SP_REGNUM && !fi->signal_handler_caller)
+ return fi->frame;
+ else
+ {
+ if (fi->saved_regs == NULL)
+ mips_find_saved_regs (fi);
+ if (fi->saved_regs->regs[regno])
+ return read_memory_integer(fi->saved_regs->regs[regno], MIPS_REGSIZE);
+ }
+ }
+ return read_register (regno);
+}
+
+/* mips_addr_bits_remove - remove useless address bits */
+
+CORE_ADDR
+mips_addr_bits_remove (addr)
+ CORE_ADDR addr;
+{
+#if GDB_TARGET_IS_MIPS64
+ if ((addr >> 32 == (CORE_ADDR)0xffffffff)
+ && (strcmp (target_shortname,"pmon")==0
+ || strcmp (target_shortname,"ddb")==0
+ || strcmp (target_shortname,"sim")==0))
+ {
+ /* This hack is a work-around for existing boards using PMON,
+ the simulator, and any other 64-bit targets that doesn't have
+ true 64-bit addressing. On these targets, the upper 32 bits
+ of addresses are ignored by the hardware. Thus, the PC or SP
+ are likely to have been sign extended to all 1s by instruction
+ sequences that load 32-bit addresses. For example, a typical
+ piece of code that loads an address is this:
+ lui $r2, <upper 16 bits>
+ ori $r2, <lower 16 bits>
+ But the lui sign-extends the value such that the upper 32 bits
+ may be all 1s. The workaround is simply to mask off these bits.
+ In the future, gcc may be changed to support true 64-bit
+ addressing, and this masking will have to be disabled. */
+ addr &= (CORE_ADDR)0xffffffff;
+ }
+#else
+ /* Even when GDB is configured for some 32-bit targets (e.g. mips-elf),
+ BFD is configured to handle 64-bit targets, so CORE_ADDR is 64 bits.
+ So we still have to mask off useless bits from addresses. */
+ addr &= (CORE_ADDR)0xffffffff;
+#endif
+
+ return addr;
+}
+
+void
+mips_init_frame_pc_first (fromleaf, prev)
+ int fromleaf;
+ struct frame_info *prev;
+{
+ CORE_ADDR pc, tmp;
+
+ pc = ((fromleaf) ? SAVED_PC_AFTER_CALL (prev->next) :
+ prev->next ? FRAME_SAVED_PC (prev->next) : read_pc ());
+ tmp = mips_skip_stub (pc);
+ prev->pc = tmp ? tmp : pc;
+}
+
+
+CORE_ADDR
mips_frame_saved_pc(frame)
- FRAME frame;
+ struct frame_info *frame;
{
+ CORE_ADDR saved_pc;
mips_extra_func_info_t proc_desc = frame->proc_desc;
/* We have to get the saved pc from the sigcontext
if it is a signal handler frame. */
: (proc_desc ? PROC_PC_REG(proc_desc) : RA_REGNUM);
if (proc_desc && PROC_DESC_IS_DUMMY(proc_desc))
- return read_memory_integer(frame->frame - 4, 4);
+ saved_pc = read_memory_integer(frame->frame - MIPS_REGSIZE, MIPS_REGSIZE);
+ else
+ saved_pc = read_next_frame_reg(frame, pcreg);
- return read_next_frame_reg(frame, pcreg);
+ return ADDR_BITS_REMOVE (saved_pc);
}
static struct mips_extra_func_info temp_proc_desc;
heuristic_proc_start(pc)
CORE_ADDR pc;
{
- CORE_ADDR start_pc = pc;
- CORE_ADDR fence = start_pc - heuristic_fence_post;
-
+ CORE_ADDR start_pc;
+ CORE_ADDR fence;
+ int instlen;
+ int seen_adjsp = 0;
+
+ pc = ADDR_BITS_REMOVE (pc);
+ start_pc = pc;
+ fence = start_pc - heuristic_fence_post;
if (start_pc == 0) return 0;
if (heuristic_fence_post == UINT_MAX
|| fence < VM_MIN_ADDRESS)
fence = VM_MIN_ADDRESS;
+ instlen = IS_MIPS16_ADDR (pc) ? MIPS16_INSTLEN : MIPS_INSTLEN;
+
/* search back for previous return */
- for (start_pc -= 4; ; start_pc -= 4)
+ for (start_pc -= instlen; ; start_pc -= instlen)
if (start_pc < fence)
{
/* It's not clear to me why we reach this point when
else
warning("Hit heuristic-fence-post without finding");
- warning("enclosing function for address 0x%x", pc);
+ warning("enclosing function for address 0x%s", paddr_nz (pc));
if (!blurb_printed)
{
printf_filtered ("\
return 0;
}
+ else if (IS_MIPS16_ADDR (start_pc))
+ {
+ unsigned short inst;
+
+ /* On MIPS16, any one of the following is likely to be the
+ start of a function:
+ entry
+ addiu sp,-n
+ daddiu sp,-n
+ extend -n followed by 'addiu sp,+n' or 'daddiu sp,+n' */
+ inst = mips_fetch_instruction (start_pc);
+ if (((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
+ || (inst & 0xff80) == 0x6380 /* addiu sp,-n */
+ || (inst & 0xff80) == 0xfb80 /* daddiu sp,-n */
+ || ((inst & 0xf810) == 0xf010 && seen_adjsp)) /* extend -n */
+ break;
+ else if ((inst & 0xff00) == 0x6300 /* addiu sp */
+ || (inst & 0xff00) == 0xfb00) /* daddiu sp */
+ seen_adjsp = 1;
+ else
+ seen_adjsp = 0;
+ }
else if (ABOUT_TO_RETURN(start_pc))
+ {
+ start_pc += 2 * MIPS_INSTLEN; /* skip return, and its delay slot */
break;
+ }
- start_pc += 8; /* skip return, and its delay slot */
#if 0
/* skip nops (usually 1) 0 - is this */
- while (start_pc < pc && read_memory_integer (start_pc, 4) == 0)
- start_pc += 4;
+ while (start_pc < pc && read_memory_integer (start_pc, MIPS_INSTLEN) == 0)
+ start_pc += MIPS_INSTLEN;
#endif
return start_pc;
}
-static mips_extra_func_info_t
-heuristic_proc_desc(start_pc, limit_pc, next_frame)
+/* Fetch the immediate value from a MIPS16 instruction.
+ If the previous instruction was an EXTEND, use it to extend
+ the upper bits of the immediate value. This is a helper function
+ for mips16_heuristic_proc_desc. */
+
+static int
+mips16_get_imm (prev_inst, inst, nbits, scale, is_signed)
+ unsigned short prev_inst; /* previous instruction */
+ unsigned short inst; /* current current instruction */
+ int nbits; /* number of bits in imm field */
+ int scale; /* scale factor to be applied to imm */
+ int is_signed; /* is the imm field signed? */
+{
+ int offset;
+
+ if ((prev_inst & 0xf800) == 0xf000) /* prev instruction was EXTEND? */
+ {
+ offset = ((prev_inst & 0x1f) << 11) | (prev_inst & 0x7e0);
+ if (offset & 0x8000) /* check for negative extend */
+ offset = 0 - (0x10000 - (offset & 0xffff));
+ return offset | (inst & 0x1f);
+ }
+ else
+ {
+ int max_imm = 1 << nbits;
+ int mask = max_imm - 1;
+ int sign_bit = max_imm >> 1;
+
+ offset = inst & mask;
+ if (is_signed && (offset & sign_bit))
+ offset = 0 - (max_imm - offset);
+ return offset * scale;
+ }
+}
+
+
+/* Fill in values in temp_proc_desc based on the MIPS16 instruction
+ stream from start_pc to limit_pc. */
+
+static void
+mips16_heuristic_proc_desc(start_pc, limit_pc, next_frame, sp)
+ CORE_ADDR start_pc, limit_pc;
+ struct frame_info *next_frame;
+ CORE_ADDR sp;
+{
+ CORE_ADDR cur_pc;
+ CORE_ADDR frame_addr = 0; /* Value of $r17, used as frame pointer */
+ unsigned short prev_inst = 0; /* saved copy of previous instruction */
+ unsigned inst = 0; /* current instruction */
+
+ PROC_FRAME_OFFSET(&temp_proc_desc) = 0;
+
+ for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS16_INSTLEN)
+ {
+ int reg, offset;
+
+ /* Save the previous instruction. If it's an EXTEND, we'll extract
+ the immediate offset extension from it in mips16_get_imm. */
+ prev_inst = inst;
+
+ /* Fetch and decode the instruction. */
+ inst = (unsigned short) mips_fetch_instruction (cur_pc);
+ if ((inst & 0xff00) == 0x6300 /* addiu sp */
+ || (inst & 0xff00) == 0xfb00) /* daddiu sp */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 8, 8, 1);
+ if (offset < 0) /* negative stack adjustment? */
+ PROC_FRAME_OFFSET(&temp_proc_desc) -= offset;
+ else
+ /* Exit loop if a positive stack adjustment is found, which
+ usually means that the stack cleanup code in the function
+ epilogue is reached. */
+ break;
+ }
+ else if ((inst & 0xf800) == 0xd000) /* sw reg,n($sp) */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
+ reg = mips16_to_32_reg[(inst & 0x700) >> 8];
+ PROC_REG_MASK(&temp_proc_desc) |= (1 << reg);
+ temp_saved_regs.regs[reg] = sp + offset;
+ }
+ else if ((inst & 0xff00) == 0xf900) /* sd reg,n($sp) */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 5, 8, 0);
+ reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
+ PROC_REG_MASK(&temp_proc_desc) |= (1 << reg);
+ temp_saved_regs.regs[reg] = sp + offset;
+ }
+ else if ((inst & 0xff00) == 0x6200) /* sw $ra,n($sp) */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
+ PROC_REG_MASK(&temp_proc_desc) |= (1 << 31);
+ temp_saved_regs.regs[31] = sp + offset;
+ }
+ else if ((inst & 0xff00) == 0xfa00) /* sd $ra,n($sp) */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 8, 8, 0);
+ PROC_REG_MASK(&temp_proc_desc) |= (1 << 31);
+ temp_saved_regs.regs[31] = sp + offset;
+ }
+ else if (inst == 0x673d) /* move $s1, $sp */
+ {
+ frame_addr = read_next_frame_reg(next_frame, 30);
+ PROC_FRAME_REG (&temp_proc_desc) = 17;
+ }
+ else if ((inst & 0xff00) == 0x0100) /* addiu $s1,sp,n */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
+ frame_addr = sp + offset;
+ PROC_FRAME_REG (&temp_proc_desc) = 17;
+ }
+ else if ((inst & 0xFF00) == 0xd900) /* sw reg,offset($s1) */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 5, 4, 0);
+ reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
+ PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+ temp_saved_regs.regs[reg] = frame_addr + offset;
+ }
+ else if ((inst & 0xFF00) == 0x7900) /* sd reg,offset($s1) */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 5, 8, 0);
+ reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
+ PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+ temp_saved_regs.regs[reg] = frame_addr + offset;
+ }
+ else if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
+ {
+ int areg_count = (inst >> 8) & 7;
+ int sreg_count = (inst >> 6) & 3;
+
+ /* The entry instruction always subtracts 32 from the SP. */
+ PROC_FRAME_OFFSET(&temp_proc_desc) += 32;
+
+ /* Check if a0-a3 were saved in the caller's argument save area. */
+ for (reg = 4, offset = 32; reg < areg_count+4; reg++)
+ {
+ PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+ temp_saved_regs.regs[reg] = sp + offset;
+ offset -= MIPS_REGSIZE;
+ }
+
+ /* Check if the ra register was pushed on the stack. */
+ offset = 28;
+ if (inst & 0x20)
+ {
+ PROC_REG_MASK(&temp_proc_desc) |= 1 << 31;
+ temp_saved_regs.regs[31] = sp + offset;
+ offset -= MIPS_REGSIZE;
+ }
+
+ /* Check if the s0 and s1 registers were pushed on the stack. */
+ for (reg = 16; reg < sreg_count+16; reg++)
+ {
+ PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+ temp_saved_regs.regs[reg] = sp + offset;
+ offset -= MIPS_REGSIZE;
+ }
+ }
+ else if ((inst & 0xf800) == 0x1800) /* jal(x) */
+ cur_pc += MIPS16_INSTLEN; /* 32-bit instruction */
+ }
+}
+
+static void
+mips32_heuristic_proc_desc(start_pc, limit_pc, next_frame, sp)
CORE_ADDR start_pc, limit_pc;
- FRAME next_frame;
+ struct frame_info *next_frame;
+ CORE_ADDR sp;
{
- CORE_ADDR sp = next_frame ? next_frame->frame : read_register (SP_REGNUM);
- CORE_ADDR cur_pc;
- int frame_size;
- int has_frame_reg = 0;
- int reg30 = 0; /* Value of $r30. Used by gcc for frame-pointer */
- unsigned long reg_mask = 0;
-
- if (start_pc == 0) return NULL;
- memset(&temp_proc_desc, '\0', sizeof(temp_proc_desc));
- memset(&temp_saved_regs, '\0', sizeof(struct frame_saved_regs));
- PROC_LOW_ADDR(&temp_proc_desc) = start_pc;
-
- if (start_pc + 200 < limit_pc) limit_pc = start_pc + 200;
- restart:
- frame_size = 0;
- for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += 4) {
- char buf[4];
- unsigned long word;
- int status;
-
- status = read_memory_nobpt (cur_pc, buf, 4);
- if (status) memory_error (status, cur_pc);
- word = extract_unsigned_integer (buf, 4);
-
- if ((word & 0xFFFF0000) == 0x27bd0000) /* addiu $sp,$sp,-i */
- frame_size += (-word) & 0xFFFF;
- else if ((word & 0xFFFF0000) == 0x23bd0000) /* addu $sp,$sp,-i */
- frame_size += (-word) & 0xFFFF;
- else if ((word & 0xFFE00000) == 0xafa00000) { /* sw reg,offset($sp) */
- int reg = (word & 0x001F0000) >> 16;
- reg_mask |= 1 << reg;
- temp_saved_regs.regs[reg] = sp + (word & 0xffff);
+ CORE_ADDR cur_pc;
+ CORE_ADDR frame_addr = 0; /* Value of $r30. Used by gcc for frame-pointer */
+restart:
+ PROC_FRAME_OFFSET(&temp_proc_desc) = 0;
+ for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS_INSTLEN)
+ {
+ unsigned long inst, high_word, low_word;
+ int reg;
+
+ /* Fetch the instruction. */
+ inst = (unsigned long) mips_fetch_instruction (cur_pc);
+
+ /* Save some code by pre-extracting some useful fields. */
+ high_word = (inst >> 16) & 0xffff;
+ low_word = inst & 0xffff;
+ reg = high_word & 0x1f;
+
+ if (high_word == 0x27bd /* addiu $sp,$sp,-i */
+ || high_word == 0x23bd /* addi $sp,$sp,-i */
+ || high_word == 0x67bd) /* daddiu $sp,$sp,-i */
+ {
+ if (low_word & 0x8000) /* negative stack adjustment? */
+ PROC_FRAME_OFFSET(&temp_proc_desc) += 0x10000 - low_word;
+ else
+ /* Exit loop if a positive stack adjustment is found, which
+ usually means that the stack cleanup code in the function
+ epilogue is reached. */
+ break;
+ }
+ else if ((high_word & 0xFFE0) == 0xafa0) /* sw reg,offset($sp) */
+ {
+ PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+ temp_saved_regs.regs[reg] = sp + low_word;
+ }
+ else if ((high_word & 0xFFE0) == 0xffa0) /* sd reg,offset($sp) */
+ {
+ /* Irix 6.2 N32 ABI uses sd instructions for saving $gp and $ra,
+ but the register size used is only 32 bits. Make the address
+ for the saved register point to the lower 32 bits. */
+ PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+ temp_saved_regs.regs[reg] = sp + low_word + 8 - MIPS_REGSIZE;
}
- else if ((word & 0xFFFF0000) == 0x27be0000) { /* addiu $30,$sp,size */
- if ((word & 0xffff) != frame_size)
- reg30 = sp + (word & 0xffff);
- else if (!has_frame_reg) {
- int alloca_adjust;
- has_frame_reg = 1;
- reg30 = read_next_frame_reg(next_frame, 30);
- alloca_adjust = reg30 - (sp + (word & 0xffff));
- if (alloca_adjust > 0) {
- /* FP > SP + frame_size. This may be because
- * of an alloca or somethings similar.
- * Fix sp to "pre-alloca" value, and try again.
- */
- sp += alloca_adjust;
- goto restart;
+ else if (high_word == 0x27be) /* addiu $30,$sp,size */
+ {
+ /* Old gcc frame, r30 is virtual frame pointer. */
+ if ((long)low_word != PROC_FRAME_OFFSET(&temp_proc_desc))
+ frame_addr = sp + low_word;
+ else if (PROC_FRAME_REG (&temp_proc_desc) == SP_REGNUM)
+ {
+ unsigned alloca_adjust;
+ PROC_FRAME_REG (&temp_proc_desc) = 30;
+ frame_addr = read_next_frame_reg(next_frame, 30);
+ alloca_adjust = (unsigned)(frame_addr - (sp + low_word));
+ if (alloca_adjust > 0)
+ {
+ /* FP > SP + frame_size. This may be because
+ * of an alloca or somethings similar.
+ * Fix sp to "pre-alloca" value, and try again.
+ */
+ sp += alloca_adjust;
+ goto restart;
}
}
}
- else if ((word & 0xFFE00000) == 0xafc00000) { /* sw reg,offset($30) */
- int reg = (word & 0x001F0000) >> 16;
- reg_mask |= 1 << reg;
- temp_saved_regs.regs[reg] = reg30 + (word & 0xffff);
+ /* move $30,$sp. With different versions of gas this will be either
+ `addu $30,$sp,$zero' or `or $30,$sp,$zero' or `daddu 30,sp,$0'.
+ Accept any one of these. */
+ else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d)
+ {
+ /* New gcc frame, virtual frame pointer is at r30 + frame_size. */
+ if (PROC_FRAME_REG (&temp_proc_desc) == SP_REGNUM)
+ {
+ unsigned alloca_adjust;
+ PROC_FRAME_REG (&temp_proc_desc) = 30;
+ frame_addr = read_next_frame_reg(next_frame, 30);
+ alloca_adjust = (unsigned)(frame_addr - sp);
+ if (alloca_adjust > 0)
+ {
+ /* FP > SP + frame_size. This may be because
+ * of an alloca or somethings similar.
+ * Fix sp to "pre-alloca" value, and try again.
+ */
+ sp += alloca_adjust;
+ goto restart;
+ }
+ }
+ }
+ else if ((high_word & 0xFFE0) == 0xafc0) /* sw reg,offset($30) */
+ {
+ PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+ temp_saved_regs.regs[reg] = frame_addr + low_word;
}
}
- if (has_frame_reg) {
- PROC_FRAME_REG(&temp_proc_desc) = 30;
- PROC_FRAME_OFFSET(&temp_proc_desc) = 0;
- }
- else {
- PROC_FRAME_REG(&temp_proc_desc) = SP_REGNUM;
- PROC_FRAME_OFFSET(&temp_proc_desc) = frame_size;
- }
- PROC_REG_MASK(&temp_proc_desc) = reg_mask;
- PROC_PC_REG(&temp_proc_desc) = RA_REGNUM;
- return &temp_proc_desc;
}
static mips_extra_func_info_t
-find_proc_desc(pc, next_frame)
- CORE_ADDR pc;
- FRAME next_frame;
+heuristic_proc_desc(start_pc, limit_pc, next_frame)
+ CORE_ADDR start_pc, limit_pc;
+ struct frame_info *next_frame;
+{
+ CORE_ADDR sp = read_next_frame_reg (next_frame, SP_REGNUM);
+
+ if (start_pc == 0) return NULL;
+ memset (&temp_proc_desc, '\0', sizeof(temp_proc_desc));
+ memset (&temp_saved_regs, '\0', sizeof(struct frame_saved_regs));
+ PROC_LOW_ADDR (&temp_proc_desc) = start_pc;
+ PROC_FRAME_REG (&temp_proc_desc) = SP_REGNUM;
+ PROC_PC_REG (&temp_proc_desc) = RA_REGNUM;
+
+ if (start_pc + 200 < limit_pc)
+ limit_pc = start_pc + 200;
+ if (IS_MIPS16_ADDR (start_pc))
+ mips16_heuristic_proc_desc (start_pc, limit_pc, next_frame, sp);
+ else
+ mips32_heuristic_proc_desc (start_pc, limit_pc, next_frame, sp);
+ return &temp_proc_desc;
+}
+
+static mips_extra_func_info_t
+non_heuristic_proc_desc (pc, addrptr)
+ CORE_ADDR pc;
+ CORE_ADDR *addrptr;
{
+ CORE_ADDR startaddr;
mips_extra_func_info_t proc_desc;
struct block *b = block_for_pc(pc);
struct symbol *sym;
- CORE_ADDR startaddr;
find_pc_partial_function (pc, NULL, &startaddr, NULL);
- if (b == NULL)
+ if (addrptr)
+ *addrptr = startaddr;
+ if (b == NULL || PC_IN_CALL_DUMMY (pc, 0, 0))
sym = NULL;
else
{
symbol reading. */
sym = NULL;
else
- sym = lookup_symbol (MIPS_EFI_SYMBOL_NAME, b, LABEL_NAMESPACE,
- 0, NULL);
+ sym = lookup_symbol (MIPS_EFI_SYMBOL_NAME, b, LABEL_NAMESPACE, 0, NULL);
}
+ /* If we never found a PDR for this function in symbol reading, then
+ examine prologues to find the information. */
if (sym)
{
- /* IF this is the topmost frame AND
- * (this proc does not have debugging information OR
- * the PC is in the procedure prologue)
- * THEN create a "heuristic" proc_desc (by analyzing
- * the actual code) to replace the "official" proc_desc.
- */
- proc_desc = (mips_extra_func_info_t)SYMBOL_VALUE(sym);
- if (next_frame == NULL) {
- struct symtab_and_line val;
- struct symbol *proc_symbol =
- PROC_DESC_IS_DUMMY(proc_desc) ? 0 : PROC_SYMBOL(proc_desc);
-
- if (proc_symbol) {
- val = find_pc_line (BLOCK_START
- (SYMBOL_BLOCK_VALUE(proc_symbol)),
- 0);
- val.pc = val.end ? val.end : pc;
- }
- if (!proc_symbol || pc < val.pc) {
- mips_extra_func_info_t found_heuristic =
- heuristic_proc_desc(PROC_LOW_ADDR(proc_desc),
- pc, next_frame);
- if (found_heuristic) proc_desc = found_heuristic;
- }
- }
+ proc_desc = (mips_extra_func_info_t) SYMBOL_VALUE (sym);
+ if (PROC_FRAME_REG (proc_desc) == -1)
+ return NULL;
+ else
+ return proc_desc;
+ }
+ else
+ return NULL;
+}
+
+
+static mips_extra_func_info_t
+find_proc_desc (pc, next_frame)
+ CORE_ADDR pc;
+ struct frame_info *next_frame;
+{
+ mips_extra_func_info_t proc_desc;
+ CORE_ADDR startaddr;
+
+ proc_desc = non_heuristic_proc_desc (pc, &startaddr);
+
+ if (proc_desc)
+ {
+ /* IF this is the topmost frame AND
+ * (this proc does not have debugging information OR
+ * the PC is in the procedure prologue)
+ * THEN create a "heuristic" proc_desc (by analyzing
+ * the actual code) to replace the "official" proc_desc.
+ */
+ if (next_frame == NULL)
+ {
+ struct symtab_and_line val;
+ struct symbol *proc_symbol =
+ PROC_DESC_IS_DUMMY(proc_desc) ? 0 : PROC_SYMBOL(proc_desc);
+
+ if (proc_symbol)
+ {
+ val = find_pc_line (BLOCK_START
+ (SYMBOL_BLOCK_VALUE(proc_symbol)),
+ 0);
+ val.pc = val.end ? val.end : pc;
+ }
+ if (!proc_symbol || pc < val.pc)
+ {
+ mips_extra_func_info_t found_heuristic =
+ heuristic_proc_desc (PROC_LOW_ADDR (proc_desc),
+ pc, next_frame);
+ if (found_heuristic)
+ proc_desc = found_heuristic;
+ }
+ }
}
else
{
heuristic_proc_desc knows how to create them! */
register struct linked_proc_info *link;
+
for (link = linked_proc_desc_table; link; link = link->next)
- if (PROC_LOW_ADDR(&link->info) <= pc
- && PROC_HIGH_ADDR(&link->info) > pc)
- return &link->info;
+ if (PROC_LOW_ADDR(&link->info) <= pc
+ && PROC_HIGH_ADDR(&link->info) > pc)
+ return &link->info;
if (startaddr == 0)
startaddr = heuristic_proc_start (pc);
return proc_desc;
}
+static CORE_ADDR
+get_frame_pointer(frame, proc_desc)
+ struct frame_info *frame;
+ mips_extra_func_info_t proc_desc;
+{
+ return ADDR_BITS_REMOVE (read_next_frame_reg (frame,
+ PROC_FRAME_REG(proc_desc)) + PROC_FRAME_OFFSET(proc_desc));
+}
+
mips_extra_func_info_t cached_proc_desc;
-FRAME_ADDR
+CORE_ADDR
mips_frame_chain(frame)
- FRAME frame;
+ struct frame_info *frame;
{
- mips_extra_func_info_t proc_desc;
- CORE_ADDR saved_pc = FRAME_SAVED_PC(frame);
-
- if (saved_pc == 0 || inside_entry_file (saved_pc))
- return 0;
-
- proc_desc = find_proc_desc(saved_pc, frame);
- if (!proc_desc)
- return 0;
-
- cached_proc_desc = proc_desc;
-
- /* If no frame pointer and frame size is zero, we must be at end
- of stack (or otherwise hosed). If we don't check frame size,
- we loop forever if we see a zero size frame. */
- if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
- && PROC_FRAME_OFFSET (proc_desc) == 0
- /* The previous frame from a sigtramp frame might be frameless
- and have frame size zero. */
- && !frame->signal_handler_caller)
- return 0;
- else
- return read_next_frame_reg(frame, PROC_FRAME_REG(proc_desc))
- + PROC_FRAME_OFFSET(proc_desc);
+ mips_extra_func_info_t proc_desc;
+ CORE_ADDR tmp;
+ CORE_ADDR saved_pc = FRAME_SAVED_PC(frame);
+
+ if (saved_pc == 0 || inside_entry_file (saved_pc))
+ return 0;
+
+ /* Check if the PC is inside a call stub. If it is, fetch the
+ PC of the caller of that stub. */
+ if ((tmp = mips_skip_stub (saved_pc)) != 0)
+ saved_pc = tmp;
+
+ /* Look up the procedure descriptor for this PC. */
+ proc_desc = find_proc_desc(saved_pc, frame);
+ if (!proc_desc)
+ return 0;
+
+ cached_proc_desc = proc_desc;
+
+ /* If no frame pointer and frame size is zero, we must be at end
+ of stack (or otherwise hosed). If we don't check frame size,
+ we loop forever if we see a zero size frame. */
+ if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
+ && PROC_FRAME_OFFSET (proc_desc) == 0
+ /* The previous frame from a sigtramp frame might be frameless
+ and have frame size zero. */
+ && !frame->signal_handler_caller)
+ return 0;
+ else
+ return get_frame_pointer (frame, proc_desc);
}
void
init_extra_frame_info(fci)
struct frame_info *fci;
{
- extern struct obstack frame_cache_obstack;
+ int regnum;
+
/* Use proc_desc calculated in frame_chain */
mips_extra_func_info_t proc_desc =
fci->next ? cached_proc_desc : find_proc_desc(fci->pc, fci->next);
- fci->saved_regs = (struct frame_saved_regs*)
- obstack_alloc (&frame_cache_obstack, sizeof(struct frame_saved_regs));
- memset (fci->saved_regs, 0, sizeof (struct frame_saved_regs));
+ fci->saved_regs = NULL;
fci->proc_desc =
proc_desc == &temp_proc_desc ? 0 : proc_desc;
if (proc_desc)
{
- int ireg;
- CORE_ADDR reg_position;
- /* r0 bit means kernel trap */
- int kernel_trap = PROC_REG_MASK(proc_desc) & 1;
-
/* Fixup frame-pointer - only needed for top frame */
/* This may not be quite right, if proc has a real frame register.
Get the value of the frame relative sp, procedure might have been
interrupted by a signal at it's very start. */
- if (fci->pc == PROC_LOW_ADDR(proc_desc) && !PROC_DESC_IS_DUMMY(proc_desc))
- fci->frame = READ_FRAME_REG(fci, SP_REGNUM);
+ if (fci->pc == PROC_LOW_ADDR (proc_desc)
+ && !PROC_DESC_IS_DUMMY (proc_desc))
+ fci->frame = read_next_frame_reg (fci->next, SP_REGNUM);
else
- fci->frame = READ_FRAME_REG(fci, PROC_FRAME_REG(proc_desc))
- + PROC_FRAME_OFFSET(proc_desc);
+ fci->frame = get_frame_pointer (fci->next, proc_desc);
if (proc_desc == &temp_proc_desc)
- *fci->saved_regs = temp_saved_regs;
- else
{
- /* What registers have been saved? Bitmasks. */
- unsigned long gen_mask, float_mask;
-
- gen_mask = kernel_trap ? 0xFFFFFFFF : PROC_REG_MASK(proc_desc);
- float_mask = kernel_trap ? 0xFFFFFFFF : PROC_FREG_MASK(proc_desc);
-
- if (/* In any frame other than the innermost, we assume that all
- registers have been saved. This assumes that all register
- saves in a function happen before the first function
- call. */
- fci->next == NULL
-
- /* In a dummy frame we know exactly where things are saved. */
- && !PROC_DESC_IS_DUMMY (proc_desc)
-
- /* Not sure exactly what kernel_trap means, but if it means
- the kernel saves the registers without a prologue doing it,
- we better not examine the prologue to see whether registers
- have been saved yet. */
- && !kernel_trap)
+ char *name;
+
+ /* Do not set the saved registers for a sigtramp frame,
+ mips_find_saved_registers will do that for us.
+ We can't use fci->signal_handler_caller, it is not yet set. */
+ find_pc_partial_function (fci->pc, &name,
+ (CORE_ADDR *)NULL,(CORE_ADDR *)NULL);
+ if (!IN_SIGTRAMP (fci->pc, name))
{
- /* We need to figure out whether the registers that the proc_desc
- claims are saved have been saved yet. */
-
- CORE_ADDR addr;
- int status;
- char buf[4];
- unsigned long inst;
-
- /* Bitmasks; set if we have found a save for the register. */
- unsigned long gen_save_found = 0;
- unsigned long float_save_found = 0;
-
- for (addr = PROC_LOW_ADDR (proc_desc);
- addr < fci->pc && (gen_mask != gen_save_found
- || float_mask != float_save_found);
- addr += 4)
- {
- status = read_memory_nobpt (addr, buf, 4);
- if (status)
- memory_error (status, addr);
- inst = extract_unsigned_integer (buf, 4);
- if (/* sw reg,n($sp) */
- (inst & 0xffe00000) == 0xafa00000
-
- /* sw reg,n($r30) */
- || (inst & 0xffe00000) == 0xafc00000)
- {
- /* It might be possible to use the instruction to
- find the offset, rather than the code below which
- is based on things being in a certain order in the
- frame, but figuring out what the instruction's offset
- is relative to might be a little tricky. */
- int reg = (inst & 0x001f0000) >> 16;
- gen_save_found |= (1 << reg);
- }
- else if (/* swc1 freg,n($sp) */
- (inst & 0xffe00000) == 0xe7a00000
-
- /* swc1 freg,n($r30) */
- || (inst & 0xffe00000) == 0xe7c00000)
- {
- int reg = ((inst & 0x001f0000) >> 16);
- float_save_found |= (1 << reg);
- }
- }
- gen_mask = gen_save_found;
- float_mask = float_save_found;
+ fci->saved_regs = (struct frame_saved_regs*)
+ obstack_alloc (&frame_cache_obstack,
+ sizeof (struct frame_saved_regs));
+ *fci->saved_regs = temp_saved_regs;
+ fci->saved_regs->regs[PC_REGNUM]
+ = fci->saved_regs->regs[RA_REGNUM];
}
-
- /* Fill in the offsets for the registers which gen_mask says
- were saved. */
- reg_position = fci->frame + PROC_REG_OFFSET (proc_desc);
- for (ireg= 31; gen_mask; --ireg, gen_mask <<= 1)
- if (gen_mask & 0x80000000)
- {
- fci->saved_regs->regs[ireg] = reg_position;
- reg_position -= 4;
- }
- /* Fill in the offsets for the registers which float_mask says
- were saved. */
- reg_position = fci->frame + PROC_FREG_OFFSET (proc_desc);
-
- /* The freg_offset points to where the first *double* register
- is saved. So skip to the high-order word. */
- reg_position += 4;
- for (ireg = 31; float_mask; --ireg, float_mask <<= 1)
- if (float_mask & 0x80000000)
- {
- fci->saved_regs->regs[FP0_REGNUM+ireg] = reg_position;
- reg_position -= 4;
- }
}
/* hack: if argument regs are saved, guess these contain args */
- if ((PROC_REG_MASK(proc_desc) & 0xF0) == 0) fci->num_args = -1;
- else if ((PROC_REG_MASK(proc_desc) & 0x80) == 0) fci->num_args = 4;
- else if ((PROC_REG_MASK(proc_desc) & 0x40) == 0) fci->num_args = 3;
- else if ((PROC_REG_MASK(proc_desc) & 0x20) == 0) fci->num_args = 2;
- else if ((PROC_REG_MASK(proc_desc) & 0x10) == 0) fci->num_args = 1;
-
- fci->saved_regs->regs[PC_REGNUM] = fci->saved_regs->regs[RA_REGNUM];
+ fci->num_args = -1; /* assume we can't tell how many args for now */
+ for (regnum = MIPS_LAST_ARG_REGNUM; regnum >= A0_REGNUM; regnum--)
+ {
+ if (PROC_REG_MASK(proc_desc) & (1 << regnum))
+ {
+ fci->num_args = regnum - A0_REGNUM + 1;
+ break;
+ }
+ }
}
}
cache. This allows the rest of info frame to extract the important
arguments without difficulty. */
-FRAME
+struct frame_info *
setup_arbitrary_frame (argc, argv)
int argc;
- FRAME_ADDR *argv;
+ CORE_ADDR *argv;
{
if (argc != 2)
error ("MIPS frame specifications require two arguments: sp and pc");
return create_new_frame (argv[0], argv[1]);
}
-
CORE_ADDR
mips_push_arguments(nargs, args, sp, struct_return, struct_addr)
- int nargs;
- value *args;
- CORE_ADDR sp;
- int struct_return;
- CORE_ADDR struct_addr;
+ int nargs;
+ value_ptr *args;
+ CORE_ADDR sp;
+ int struct_return;
+ CORE_ADDR struct_addr;
{
- register i;
- int accumulate_size = struct_return ? 4 : 0;
- struct mips_arg { char *contents; int len; int offset; };
- struct mips_arg *mips_args =
- (struct mips_arg*)alloca(nargs * sizeof(struct mips_arg));
- register struct mips_arg *m_arg;
- for (i = 0, m_arg = mips_args; i < nargs; i++, m_arg++) {
- extern value value_arg_coerce();
- value arg = value_arg_coerce (args[i]);
- m_arg->len = TYPE_LENGTH (VALUE_TYPE (arg));
- /* This entire mips-specific routine is because doubles must be aligned
- * on 8-byte boundaries. It still isn't quite right, because MIPS decided
- * to align 'struct {int a, b}' on 4-byte boundaries (even though this
- * breaks their varargs implementation...). A correct solution
- * requires an simulation of gcc's 'alignof' (and use of 'alignof'
- * in stdarg.h/varargs.h).
- */
- if (m_arg->len > 4) accumulate_size = (accumulate_size + 7) & -8;
- m_arg->offset = accumulate_size;
- accumulate_size = (accumulate_size + m_arg->len + 3) & -4;
- m_arg->contents = VALUE_CONTENTS(arg);
- }
- accumulate_size = (accumulate_size + 7) & (-8);
- if (accumulate_size < 16) accumulate_size = 16;
- sp -= accumulate_size;
- for (i = nargs; m_arg--, --i >= 0; )
- write_memory(sp + m_arg->offset, m_arg->contents, m_arg->len);
+ int argreg;
+ int float_argreg;
+ int argnum;
+ int len = 0;
+ int stack_offset = 0;
+
+ /* Macros to round N up or down to the next A boundary; A must be
+ a power of two. */
+#define ROUND_DOWN(n,a) ((n) & ~((a)-1))
+#define ROUND_UP(n,a) (((n)+(a)-1) & ~((a)-1))
+
+ /* First ensure that the stack and structure return address (if any)
+ are properly aligned. The stack has to be 64-bit aligned even
+ on 32-bit machines, because doubles must be 64-bit aligned. */
+ sp = ROUND_DOWN (sp, 8);
+ struct_addr = ROUND_DOWN (struct_addr, MIPS_REGSIZE);
+
+ /* Now make space on the stack for the args. We allocate more
+ than necessary for EABI, because the first few arguments are
+ passed in registers, but that's OK. */
+ for (argnum = 0; argnum < nargs; argnum++)
+ len += ROUND_UP (TYPE_LENGTH(VALUE_TYPE(args[argnum])), MIPS_REGSIZE);
+ sp -= ROUND_UP (len, 8);
+
+ /* Initialize the integer and float register pointers. */
+ argreg = A0_REGNUM;
+ float_argreg = FPA0_REGNUM;
+
+ /* the struct_return pointer occupies the first parameter-passing reg */
if (struct_return)
+ write_register (argreg++, struct_addr);
+
+ /* Now load as many as possible of the first arguments into
+ registers, and push the rest onto the stack. Loop thru args
+ from first to last. */
+ for (argnum = 0; argnum < nargs; argnum++)
{
- char buf[TARGET_PTR_BIT / HOST_CHAR_BIT];
+ char *val;
+ char valbuf[REGISTER_RAW_SIZE(A0_REGNUM)];
+ value_ptr arg = args[argnum];
+ struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+ int len = TYPE_LENGTH (arg_type);
+ enum type_code typecode = TYPE_CODE (arg_type);
+
+ /* The EABI passes structures that do not fit in a register by
+ reference. In all other cases, pass the structure by value. */
+ if (MIPS_EABI && len > MIPS_REGSIZE &&
+ (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION))
+ {
+ store_address (valbuf, MIPS_REGSIZE, VALUE_ADDRESS (arg));
+ typecode = TYPE_CODE_PTR;
+ len = MIPS_REGSIZE;
+ val = valbuf;
+ }
+ else
+ val = (char *)VALUE_CONTENTS (arg);
+
+ /* 32-bit ABIs always start floating point arguments in an
+ even-numbered floating point register. */
+ if (!GDB_TARGET_IS_MIPS64 && typecode == TYPE_CODE_FLT
+ && (float_argreg & 1))
+ float_argreg++;
+
+ /* Floating point arguments passed in registers have to be
+ treated specially. On 32-bit architectures, doubles
+ are passed in register pairs; the even register gets
+ the low word, and the odd register gets the high word.
+ On non-EABI processors, the first two floating point arguments are
+ also copied to general registers, because MIPS16 functions
+ don't use float registers for arguments. This duplication of
+ arguments in general registers can't hurt non-MIPS16 functions
+ because those registers are normally skipped. */
+ if (typecode == TYPE_CODE_FLT
+ && float_argreg <= MIPS_LAST_FP_ARG_REGNUM
+ && mips_fpu != MIPS_FPU_NONE)
+ {
+ if (!GDB_TARGET_IS_MIPS64 && len == 8)
+ {
+ int low_offset = TARGET_BYTE_ORDER == BIG_ENDIAN ? 4 : 0;
+ unsigned long regval;
+
+ /* Write the low word of the double to the even register(s). */
+ regval = extract_unsigned_integer (val+low_offset, 4);
+ write_register (float_argreg++, regval);
+ if (!MIPS_EABI)
+ write_register (argreg+1, regval);
+
+ /* Write the high word of the double to the odd register(s). */
+ regval = extract_unsigned_integer (val+4-low_offset, 4);
+ write_register (float_argreg++, regval);
+ if (!MIPS_EABI)
+ {
+ write_register (argreg, regval);
+ argreg += 2;
+ }
+
+ }
+ else
+ {
+ /* This is a floating point value that fits entirely
+ in a single register. */
+ CORE_ADDR regval = extract_address (val, len);
+ write_register (float_argreg++, regval);
+ if (!MIPS_EABI)
+ {
+ write_register (argreg, regval);
+ argreg += GDB_TARGET_IS_MIPS64 ? 1 : 2;
+ }
+ }
+ }
+ else
+ {
+ /* Copy the argument to general registers or the stack in
+ register-sized pieces. Large arguments are split between
+ registers and stack. */
+ /* Note: structs whose size is not a multiple of MIPS_REGSIZE
+ are treated specially: Irix cc passes them in registers
+ where gcc sometimes puts them on the stack. For maximum
+ compatibility, we will put them in both places. */
+
+ int odd_sized_struct = ((len > MIPS_REGSIZE) &&
+ (len % MIPS_REGSIZE != 0));
+ while (len > 0)
+ {
+ int partial_len = len < MIPS_REGSIZE ? len : MIPS_REGSIZE;
+
+ if (argreg > MIPS_LAST_ARG_REGNUM || odd_sized_struct)
+ {
+ /* Write this portion of the argument to the stack. */
+ int longword_offset;
+
+ longword_offset = 0;
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (MIPS_REGSIZE == 8 &&
+ (typecode == TYPE_CODE_INT ||
+ typecode == TYPE_CODE_PTR ||
+ typecode == TYPE_CODE_FLT) && len <= 4)
+ longword_offset = 4;
+ else if ((typecode == TYPE_CODE_STRUCT ||
+ typecode == TYPE_CODE_UNION) &&
+ TYPE_LENGTH (arg_type) < MIPS_REGSIZE)
+ longword_offset = MIPS_REGSIZE - len;
+
+ write_memory (sp + stack_offset + longword_offset,
+ val, partial_len);
+ }
- store_address (buf, sizeof buf, struct_addr);
- write_memory (sp, buf, sizeof buf);
+ /* Note!!! This is NOT an else clause.
+ Odd sized structs may go thru BOTH paths. */
+ if (argreg <= MIPS_LAST_ARG_REGNUM)
+ {
+ CORE_ADDR regval = extract_address (val, partial_len);
+
+ /* A non-floating-point argument being passed in a
+ general register. If a struct or union, and if
+ small enough for a single register, we have to
+ adjust the alignment.
+
+ It does not seem to be necessary to do the
+ same for integral types.
+
+ Also don't do this adjustment on EABI targets. */
+
+ if (!MIPS_EABI &&
+ TYPE_LENGTH (arg_type) < MIPS_REGSIZE &&
+ (typecode == TYPE_CODE_STRUCT ||
+ typecode == TYPE_CODE_UNION))
+ regval <<= ((MIPS_REGSIZE - partial_len) *
+ TARGET_CHAR_BIT);
+
+ write_register (argreg, regval);
+ argreg++;
+
+ /* If this is the old ABI, prevent subsequent floating
+ point arguments from being passed in floating point
+ registers. */
+ if (!MIPS_EABI)
+ float_argreg = MIPS_LAST_FP_ARG_REGNUM + 1;
+ }
+
+ len -= partial_len;
+ val += partial_len;
+
+ /* The offset onto the stack at which we will start
+ copying parameters (after the registers are used up)
+ begins at (4 * MIPS_REGSIZE) in the old ABI. This
+ leaves room for the "home" area for register parameters.
+
+ In the new EABI, the 8 register parameters do not
+ have "home" stack space reserved for them, so the
+ stack offset does not get incremented until after
+ we have used up the 8 parameter registers. */
+ if (!(MIPS_EABI && argnum < 8))
+ stack_offset += ROUND_UP (partial_len, MIPS_REGSIZE);
+ }
+ }
}
+
+ /* Set the return address register to point to the entry
+ point of the program, where a breakpoint lies in wait. */
+ write_register (RA_REGNUM, CALL_DUMMY_ADDRESS());
+
+ /* Return adjusted stack pointer. */
return sp;
}
-/* MASK(i,j) == (1<<i) + (1<<(i+1)) + ... + (1<<j)). Assume i<=j<31. */
+static void
+mips_push_register(CORE_ADDR *sp, int regno)
+{
+ char buffer[MAX_REGISTER_RAW_SIZE];
+ int regsize = REGISTER_RAW_SIZE (regno);
+
+ *sp -= regsize;
+ read_register_gen (regno, buffer);
+ write_memory (*sp, buffer, regsize);
+}
+
+/* MASK(i,j) == (1<<i) + (1<<(i+1)) + ... + (1<<j)). Assume i<=j<(MIPS_NUMREGS-1). */
#define MASK(i,j) (((1 << ((j)+1))-1) ^ ((1 << (i))-1))
void
mips_push_dummy_frame()
{
- char buffer[MAX_REGISTER_RAW_SIZE];
int ireg;
struct linked_proc_info *link = (struct linked_proc_info*)
xmalloc(sizeof(struct linked_proc_info));
mips_extra_func_info_t proc_desc = &link->info;
- CORE_ADDR sp = read_register (SP_REGNUM);
- CORE_ADDR save_address;
+ CORE_ADDR sp = ADDR_BITS_REMOVE (read_register (SP_REGNUM));
+ CORE_ADDR old_sp = sp;
link->next = linked_proc_desc_table;
linked_proc_desc_table = link;
+
+/* FIXME! are these correct ? */
#define PUSH_FP_REGNUM 16 /* must be a register preserved across calls */
-#define GEN_REG_SAVE_MASK MASK(1,16)|MASK(24,28)|(1<<31)
-#define GEN_REG_SAVE_COUNT 22
+#define GEN_REG_SAVE_MASK MASK(1,16)|MASK(24,28)|(1<<(MIPS_NUMREGS-1))
#define FLOAT_REG_SAVE_MASK MASK(0,19)
-#define FLOAT_REG_SAVE_COUNT 20
-#define SPECIAL_REG_SAVE_COUNT 4
+#define FLOAT_SINGLE_REG_SAVE_MASK \
+ ((1<<18)|(1<<16)|(1<<14)|(1<<12)|(1<<10)|(1<<8)|(1<<6)|(1<<4)|(1<<2)|(1<<0))
/*
* The registers we must save are all those not preserved across
* procedure calls. Dest_Reg (see tm-mips.h) must also be saved.
- * In addition, we must save the PC, and PUSH_FP_REGNUM.
- * (Ideally, we should also save MDLO/-HI and FP Control/Status reg.)
+ * In addition, we must save the PC, PUSH_FP_REGNUM, MMLO/-HI
+ * and FP Control/Status registers.
+ *
*
* Dummy frame layout:
* (high memory)
* Saved D18 (i.e. F19, F18)
* ...
* Saved D0 (i.e. F1, F0)
- * CALL_DUMMY (subroutine stub; see tm-mips.h)
- * Parameter build area (not yet implemented)
+ * Argument build area and stack arguments written via mips_push_arguments
* (low memory)
*/
+
+ /* Save special registers (PC, MMHI, MMLO, FPC_CSR) */
+ PROC_FRAME_REG(proc_desc) = PUSH_FP_REGNUM;
+ PROC_FRAME_OFFSET(proc_desc) = 0;
+ mips_push_register (&sp, PC_REGNUM);
+ mips_push_register (&sp, HI_REGNUM);
+ mips_push_register (&sp, LO_REGNUM);
+ mips_push_register (&sp, mips_fpu == MIPS_FPU_NONE ? 0 : FCRCS_REGNUM);
+
+ /* Save general CPU registers */
PROC_REG_MASK(proc_desc) = GEN_REG_SAVE_MASK;
- PROC_FREG_MASK(proc_desc) = mips_fpu ? FLOAT_REG_SAVE_MASK : 0;
- PROC_REG_OFFSET(proc_desc) = /* offset of (Saved R31) from FP */
- -sizeof(long) - 4 * SPECIAL_REG_SAVE_COUNT;
- PROC_FREG_OFFSET(proc_desc) = /* offset of (Saved D18) from FP */
- -sizeof(double) - 4 * (SPECIAL_REG_SAVE_COUNT + GEN_REG_SAVE_COUNT);
- /* save general registers */
- save_address = sp + PROC_REG_OFFSET(proc_desc);
+ PROC_REG_OFFSET(proc_desc) = sp - old_sp; /* offset of (Saved R31) from FP */
for (ireg = 32; --ireg >= 0; )
if (PROC_REG_MASK(proc_desc) & (1 << ireg))
- {
- store_unsigned_integer (buffer, REGISTER_RAW_SIZE (ireg),
- read_register (ireg));
- write_memory (save_address, buffer, REGISTER_RAW_SIZE (ireg));
- save_address -= 4;
- }
- /* save floating-points registers starting with high order word */
- save_address = sp + PROC_FREG_OFFSET(proc_desc) + 4;
+ mips_push_register (&sp, ireg);
+
+ /* Save floating point registers starting with high order word */
+ PROC_FREG_MASK(proc_desc) =
+ mips_fpu == MIPS_FPU_DOUBLE ? FLOAT_REG_SAVE_MASK
+ : mips_fpu == MIPS_FPU_SINGLE ? FLOAT_SINGLE_REG_SAVE_MASK : 0;
+ PROC_FREG_OFFSET(proc_desc) = sp - old_sp; /* offset of (Saved D18) from FP */
for (ireg = 32; --ireg >= 0; )
if (PROC_FREG_MASK(proc_desc) & (1 << ireg))
- {
- store_unsigned_integer (buffer, 4, read_register (ireg + FP0_REGNUM));
- write_memory (save_address, buffer, 4);
- save_address -= 4;
- }
- write_register (PUSH_FP_REGNUM, sp);
- PROC_FRAME_REG(proc_desc) = PUSH_FP_REGNUM;
- PROC_FRAME_OFFSET(proc_desc) = 0;
- store_unsigned_integer (buffer, REGISTER_RAW_SIZE (PC_REGNUM),
- read_register (PC_REGNUM));
- write_memory (sp - 4, buffer, REGISTER_RAW_SIZE (PC_REGNUM));
- store_unsigned_integer (buffer, REGISTER_RAW_SIZE (HI_REGNUM),
- read_register (HI_REGNUM));
- write_memory (sp - 8, buffer, REGISTER_RAW_SIZE (HI_REGNUM));
- store_unsigned_integer (buffer, REGISTER_RAW_SIZE (LO_REGNUM),
- read_register (LO_REGNUM));
- write_memory (sp - 12, buffer, REGISTER_RAW_SIZE (LO_REGNUM));
- store_unsigned_integer
- (buffer,
- REGISTER_RAW_SIZE (FCRCS_REGNUM),
- mips_fpu ? read_register (FCRCS_REGNUM) : 0);
- write_memory (sp - 16, buffer, REGISTER_RAW_SIZE (FCRCS_REGNUM));
- sp -= 4 * (GEN_REG_SAVE_COUNT
- + (mips_fpu ? FLOAT_REG_SAVE_COUNT : 0)
- + SPECIAL_REG_SAVE_COUNT);
+ mips_push_register (&sp, ireg + FP0_REGNUM);
+
+ /* Update the frame pointer for the call dummy and the stack pointer.
+ Set the procedure's starting and ending addresses to point to the
+ call dummy address at the entry point. */
+ write_register (PUSH_FP_REGNUM, old_sp);
write_register (SP_REGNUM, sp);
- PROC_LOW_ADDR(proc_desc) = sp - CALL_DUMMY_SIZE + CALL_DUMMY_START_OFFSET;
- PROC_HIGH_ADDR(proc_desc) = sp;
+ PROC_LOW_ADDR(proc_desc) = CALL_DUMMY_ADDRESS();
+ PROC_HIGH_ADDR(proc_desc) = CALL_DUMMY_ADDRESS() + 4;
SET_PROC_DESC_IS_DUMMY(proc_desc);
PROC_PC_REG(proc_desc) = RA_REGNUM;
}
mips_pop_frame()
{
register int regnum;
- FRAME frame = get_current_frame ();
- CORE_ADDR new_sp = frame->frame;
+ struct frame_info *frame = get_current_frame ();
+ CORE_ADDR new_sp = FRAME_FP (frame);
mips_extra_func_info_t proc_desc = frame->proc_desc;
write_register (PC_REGNUM, FRAME_SAVED_PC(frame));
- if (proc_desc)
+ if (frame->saved_regs == NULL)
+ mips_find_saved_regs (frame);
+ for (regnum = 0; regnum < NUM_REGS; regnum++)
{
- for (regnum = 32; --regnum >= 0; )
- if (PROC_REG_MASK(proc_desc) & (1 << regnum))
- write_register (regnum,
- read_memory_integer (frame->saved_regs->regs[regnum],
- 4));
- for (regnum = 32; --regnum >= 0; )
- if (PROC_FREG_MASK(proc_desc) & (1 << regnum))
- write_register (regnum + FP0_REGNUM,
- read_memory_integer (frame->saved_regs->regs[regnum + FP0_REGNUM], 4));
+ if (regnum != SP_REGNUM && regnum != PC_REGNUM
+ && frame->saved_regs->regs[regnum])
+ write_register (regnum,
+ read_memory_integer (frame->saved_regs->regs[regnum],
+ MIPS_REGSIZE));
}
write_register (SP_REGNUM, new_sp);
flush_cached_frames ();
- /* We let mips_init_extra_frame_info figure out the frame pointer */
- set_current_frame (create_new_frame (0, read_pc ()));
if (proc_desc && PROC_DESC_IS_DUMMY(proc_desc))
{
free (pi_ptr);
- write_register (HI_REGNUM, read_memory_integer(new_sp - 8, 4));
- write_register (LO_REGNUM, read_memory_integer(new_sp - 12, 4));
- if (mips_fpu)
- write_register (FCRCS_REGNUM, read_memory_integer(new_sp - 16, 4));
+ write_register (HI_REGNUM,
+ read_memory_integer (new_sp - 2*MIPS_REGSIZE, MIPS_REGSIZE));
+ write_register (LO_REGNUM,
+ read_memory_integer (new_sp - 3*MIPS_REGSIZE, MIPS_REGSIZE));
+ if (mips_fpu != MIPS_FPU_NONE)
+ write_register (FCRCS_REGNUM,
+ read_memory_integer (new_sp - 4*MIPS_REGSIZE, MIPS_REGSIZE));
}
}
mips_print_register (regnum, all)
int regnum, all;
{
- unsigned char raw_buffer[MAX_REGISTER_RAW_SIZE];
+ char raw_buffer[MAX_REGISTER_RAW_SIZE];
/* Get the data in raw format. */
if (read_relative_register_raw_bytes (regnum, raw_buffer))
return;
}
- /* If an even floating pointer register, also print as double. */
- if (regnum >= FP0_REGNUM && regnum < FP0_REGNUM+32
- && !((regnum-FP0_REGNUM) & 1)) {
- char dbuffer[MAX_REGISTER_RAW_SIZE];
+ /* If an even floating point register, also print as double. */
+ if (regnum >= FP0_REGNUM && regnum < FP0_REGNUM+MIPS_NUMREGS
+ && !((regnum-FP0_REGNUM) & 1))
+ {
+ char dbuffer[2 * MAX_REGISTER_RAW_SIZE];
+
+ read_relative_register_raw_bytes (regnum, dbuffer);
+ read_relative_register_raw_bytes (regnum+1, dbuffer+MIPS_REGSIZE);
+ REGISTER_CONVERT_TO_TYPE (regnum, builtin_type_double, dbuffer);
- read_relative_register_raw_bytes (regnum, dbuffer);
- read_relative_register_raw_bytes (regnum+1, dbuffer+4);
-#ifdef REGISTER_CONVERT_TO_TYPE
- REGISTER_CONVERT_TO_TYPE(regnum, builtin_type_double, dbuffer);
-#endif
- printf_filtered ("(d%d: ", regnum-FP0_REGNUM);
- val_print (builtin_type_double, dbuffer, 0,
- gdb_stdout, 0, 1, 0, Val_pretty_default);
- printf_filtered ("); ");
- }
+ printf_filtered ("(d%d: ", regnum-FP0_REGNUM);
+ val_print (builtin_type_double, dbuffer, 0,
+ gdb_stdout, 0, 1, 0, Val_pretty_default);
+ printf_filtered ("); ");
+ }
fputs_filtered (reg_names[regnum], gdb_stdout);
/* The problem with printing numeric register names (r26, etc.) is that
the user can't use them on input. Probably the best solution is to
fix it so that either the numeric or the funky (a2, etc.) names
are accepted on input. */
- if (regnum < 32)
+ if (regnum < MIPS_NUMREGS)
printf_filtered ("(r%d): ", regnum);
else
printf_filtered (": ");
/* If virtual format is floating, print it that way. */
- if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT
- && ! INVALID_FLOAT (raw_buffer, REGISTER_VIRTUAL_SIZE(regnum))) {
+ if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
val_print (REGISTER_VIRTUAL_TYPE (regnum), raw_buffer, 0,
gdb_stdout, 0, 1, 0, Val_pretty_default);
- }
/* Else print as integer in hex. */
else
- {
- long val;
-
- val = extract_signed_integer (raw_buffer,
- REGISTER_RAW_SIZE (regnum));
-
- if (val == 0)
- printf_filtered ("0");
- else if (all)
- /* FIXME: We should be printing this in a fixed field width, so that
- registers line up. */
- printf_filtered (local_hex_format(), val);
- else
- printf_filtered ("%s=%ld", local_hex_string(val), val);
- }
+ print_scalar_formatted (raw_buffer, REGISTER_VIRTUAL_TYPE (regnum),
+ 'x', 0, gdb_stdout);
}
/* Replacement for generic do_registers_info. */
+
void
mips_do_registers_info (regnum, fpregs)
int regnum;
int fpregs;
{
- if (regnum != -1) {
+ if (regnum != -1)
+ {
+ if (*(reg_names[regnum]) == '\0')
+ error ("Not a valid register for the current processor type");
+
mips_print_register (regnum, 0);
printf_filtered ("\n");
- }
- else {
- for (regnum = 0; regnum < NUM_REGS; ) {
- if ((!fpregs) && regnum >= FP0_REGNUM && regnum <= FCRIR_REGNUM) {
- regnum++;
- continue;
- }
+ }
+ else
+ {
+ int did_newline = 0;
+
+ for (regnum = 0; regnum < NUM_REGS; )
+ {
+ if (((!fpregs) && regnum >= FP0_REGNUM && regnum <= FCRIR_REGNUM)
+ || *(reg_names[regnum]) == '\0')
+ {
+ regnum++;
+ continue;
+ }
mips_print_register (regnum, 1);
regnum++;
- if ((regnum & 3) == 0 || regnum == NUM_REGS)
- printf_filtered (";\n");
- else
- printf_filtered ("; ");
- }
- }
+ printf_filtered ("; ");
+ did_newline = 0;
+ if ((regnum & 3) == 0)
+ {
+ printf_filtered ("\n");
+ did_newline = 1;
+ }
+ }
+ if (!did_newline)
+ printf_filtered ("\n");
+ }
}
+
/* Return number of args passed to a frame. described by FIP.
Can return -1, meaning no way to tell. */
int
-mips_frame_num_args(fip)
- FRAME fip;
+mips_frame_num_args (frame)
+ struct frame_info *frame;
{
-#if 0
- struct chain_info_t *p;
+#if 0 /* FIXME Use or lose this! */
+ struct chain_info_t *p;
- p = mips_find_cached_frame(FRAME_FP(fip));
- if (p->valid)
- return p->the_info.numargs;
+ p = mips_find_cached_frame (FRAME_FP (frame));
+ if (p->valid)
+ return p->the_info.numargs;
#endif
- return -1;
+ return -1;
}
-\f
-#if 0
+
/* Is this a branch with a delay slot? */
+
+static int is_delayed PARAMS ((unsigned long));
+
static int
is_delayed (insn)
unsigned long insn;
| INSN_COND_BRANCH_DELAY
| INSN_COND_BRANCH_LIKELY)));
}
-#endif
-
-/* To skip prologues, I use this predicate. Returns either PC itself
- if the code at PC does not look like a function prologue; otherwise
- returns an address that (if we're lucky) follows the prologue. If
- LENIENT, then we must skip everything which is involved in setting
- up the frame (it's OK to skip more, just so long as we don't skip
- anything which might clobber the registers which are being saved.
- We must skip more in the case where part of the prologue is in the
- delay slot of a non-prologue instruction). */
-CORE_ADDR
-mips_skip_prologue (pc, lenient)
+int
+mips_step_skips_delay (pc)
CORE_ADDR pc;
+{
+ char buf[MIPS_INSTLEN];
+
+ /* There is no branch delay slot on MIPS16. */
+ if (IS_MIPS16_ADDR (pc))
+ return 0;
+
+ if (target_read_memory (pc, buf, MIPS_INSTLEN) != 0)
+ /* If error reading memory, guess that it is not a delayed branch. */
+ return 0;
+ return is_delayed ((unsigned long)extract_unsigned_integer (buf, MIPS_INSTLEN));
+}
+
+
+/* Skip the PC past function prologue instructions (32-bit version).
+ This is a helper function for mips_skip_prologue. */
+
+static CORE_ADDR
+mips32_skip_prologue (pc, lenient)
+ CORE_ADDR pc; /* starting PC to search from */
int lenient;
{
- unsigned long inst;
- int offset;
+ t_inst inst;
+ CORE_ADDR end_pc;
int seen_sp_adjust = 0;
+ int load_immediate_bytes = 0;
/* Skip the typical prologue instructions. These are the stack adjustment
instruction and the instructions that save registers on the stack
or in the gcc frame. */
- for (offset = 0; offset < 100; offset += 4)
+ for (end_pc = pc + 100; pc < end_pc; pc += MIPS_INSTLEN)
{
- char buf[4];
- int status;
+ unsigned long high_word;
- status = read_memory_nobpt (pc + offset, buf, 4);
- if (status)
- memory_error (status, pc + offset);
- inst = extract_unsigned_integer (buf, 4);
+ inst = mips_fetch_instruction (pc);
+ high_word = (inst >> 16) & 0xffff;
#if 0
if (lenient && is_delayed (inst))
continue;
#endif
- if ((inst & 0xffff0000) == 0x27bd0000) /* addiu $sp,$sp,offset */
+ if (high_word == 0x27bd /* addiu $sp,$sp,offset */
+ || high_word == 0x67bd) /* daddiu $sp,$sp,offset */
seen_sp_adjust = 1;
- else if ((inst & 0xFFE00000) == 0xAFA00000 && (inst & 0x001F0000))
- continue; /* sw reg,n($sp) */
- /* reg != $zero */
+ else if (inst == 0x03a1e823 || /* subu $sp,$sp,$at */
+ inst == 0x03a8e823) /* subu $sp,$sp,$t0 */
+ seen_sp_adjust = 1;
+ else if (((inst & 0xFFE00000) == 0xAFA00000 /* sw reg,n($sp) */
+ || (inst & 0xFFE00000) == 0xFFA00000) /* sd reg,n($sp) */
+ && (inst & 0x001F0000)) /* reg != $zero */
+ continue;
+
else if ((inst & 0xFFE00000) == 0xE7A00000) /* swc1 freg,n($sp) */
continue;
else if ((inst & 0xF3E00000) == 0xA3C00000 && (inst & 0x001F0000))
/* sx reg,n($s8) */
continue; /* reg != $zero */
- else if (inst == 0x03A0F021) /* move $s8,$sp */
+
+ /* move $s8,$sp. With different versions of gas this will be either
+ `addu $s8,$sp,$zero' or `or $s8,$sp,$zero' or `daddu s8,sp,$0'.
+ Accept any one of these. */
+ else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d)
continue;
+
else if ((inst & 0xFF9F07FF) == 0x00800021) /* move reg,$a0-$a3 */
continue;
- else if ((inst & 0xffff0000) == 0x3c1c0000) /* lui $gp,n */
+ else if (high_word == 0x3c1c) /* lui $gp,n */
continue;
- else if ((inst & 0xffff0000) == 0x279c0000) /* addiu $gp,$gp,n */
+ else if (high_word == 0x279c) /* addiu $gp,$gp,n */
continue;
else if (inst == 0x0399e021 /* addu $gp,$gp,$t9 */
|| inst == 0x033ce021) /* addu $gp,$t9,$gp */
continue;
+ /* The following instructions load $at or $t0 with an immediate
+ value in preparation for a stack adjustment via
+ subu $sp,$sp,[$at,$t0]. These instructions could also initialize
+ a local variable, so we accept them only before a stack adjustment
+ instruction was seen. */
+ else if (!seen_sp_adjust)
+ {
+ if (high_word == 0x3c01 || /* lui $at,n */
+ high_word == 0x3c08) /* lui $t0,n */
+ {
+ load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */
+ continue;
+ }
+ else if (high_word == 0x3421 || /* ori $at,$at,n */
+ high_word == 0x3508 || /* ori $t0,$t0,n */
+ high_word == 0x3401 || /* ori $at,$zero,n */
+ high_word == 0x3408) /* ori $t0,$zero,n */
+ {
+ load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */
+ continue;
+ }
+ else
+ break;
+ }
else
+ break;
+ }
+
+ /* In a frameless function, we might have incorrectly
+ skipped some load immediate instructions. Undo the skipping
+ if the load immediate was not followed by a stack adjustment. */
+ if (load_immediate_bytes && !seen_sp_adjust)
+ pc -= load_immediate_bytes;
+ return pc;
+}
+
+/* Skip the PC past function prologue instructions (16-bit version).
+ This is a helper function for mips_skip_prologue. */
+
+static CORE_ADDR
+mips16_skip_prologue (pc, lenient)
+ CORE_ADDR pc; /* starting PC to search from */
+ int lenient;
+{
+ CORE_ADDR end_pc;
+ int extend_bytes = 0;
+ int prev_extend_bytes;
+
+ /* Table of instructions likely to be found in a function prologue. */
+ static struct
+ {
+ unsigned short inst;
+ unsigned short mask;
+ } table[] =
+ {
+ { 0x6300, 0xff00 }, /* addiu $sp,offset */
+ { 0xfb00, 0xff00 }, /* daddiu $sp,offset */
+ { 0xd000, 0xf800 }, /* sw reg,n($sp) */
+ { 0xf900, 0xff00 }, /* sd reg,n($sp) */
+ { 0x6200, 0xff00 }, /* sw $ra,n($sp) */
+ { 0xfa00, 0xff00 }, /* sd $ra,n($sp) */
+ { 0x673d, 0xffff }, /* move $s1,sp */
+ { 0xd980, 0xff80 }, /* sw $a0-$a3,n($s1) */
+ { 0x6704, 0xff1c }, /* move reg,$a0-$a3 */
+ { 0xe809, 0xf81f }, /* entry pseudo-op */
+ { 0x0100, 0xff00 }, /* addiu $s1,$sp,n */
+ { 0, 0 } /* end of table marker */
+ };
+
+ /* Skip the typical prologue instructions. These are the stack adjustment
+ instruction and the instructions that save registers on the stack
+ or in the gcc frame. */
+ for (end_pc = pc + 100; pc < end_pc; pc += MIPS16_INSTLEN)
+ {
+ unsigned short inst;
+ int i;
+
+ inst = mips_fetch_instruction (pc);
+
+ /* Normally we ignore an extend instruction. However, if it is
+ not followed by a valid prologue instruction, we must adjust
+ the pc back over the extend so that it won't be considered
+ part of the prologue. */
+ if ((inst & 0xf800) == 0xf000) /* extend */
+ {
+ extend_bytes = MIPS16_INSTLEN;
+ continue;
+ }
+ prev_extend_bytes = extend_bytes;
+ extend_bytes = 0;
+
+ /* Check for other valid prologue instructions besides extend. */
+ for (i = 0; table[i].mask != 0; i++)
+ if ((inst & table[i].mask) == table[i].inst) /* found, get out */
break;
+ if (table[i].mask != 0) /* it was in table? */
+ continue; /* ignore it */
+ else /* non-prologue */
+ {
+ /* Return the current pc, adjusted backwards by 2 if
+ the previous instruction was an extend. */
+ return pc - prev_extend_bytes;
+ }
}
- return pc + offset;
+ return pc;
+}
+
+/* To skip prologues, I use this predicate. Returns either PC itself
+ if the code at PC does not look like a function prologue; otherwise
+ returns an address that (if we're lucky) follows the prologue. If
+ LENIENT, then we must skip everything which is involved in setting
+ up the frame (it's OK to skip more, just so long as we don't skip
+ anything which might clobber the registers which are being saved.
+ We must skip more in the case where part of the prologue is in the
+ delay slot of a non-prologue instruction). */
-/* FIXME schauer. The following code seems no longer necessary if we
- always skip the typical prologue instructions. */
+CORE_ADDR
+mips_skip_prologue (pc, lenient)
+ CORE_ADDR pc;
+ int lenient;
+{
+ /* See if we can determine the end of the prologue via the symbol table.
+ If so, then return either PC, or the PC after the prologue, whichever
+ is greater. */
-#if 0
- if (seen_sp_adjust)
- return pc + offset;
-
- /* Well, it looks like a frameless. Let's make sure.
- Note that we are not called on the current PC,
- but on the function`s start PC, and I have definitely
- seen optimized code that adjusts the SP quite later */
- b = block_for_pc(pc);
- if (!b) return pc;
-
- f = lookup_symbol(MIPS_EFI_SYMBOL_NAME, b, LABEL_NAMESPACE, 0, NULL);
- if (!f) return pc;
- /* Ideally, I would like to use the adjusted info
- from mips_frame_info(), but for all practical
- purposes it will not matter (and it would require
- a different definition of SKIP_PROLOGUE())
-
- Actually, it would not hurt to skip the storing
- of arguments on the stack as well. */
- if (((mips_extra_func_info_t)SYMBOL_VALUE(f))->pdr.frameoffset)
- return pc + 4;
+ CORE_ADDR post_prologue_pc = after_prologue (pc, NULL);
- return pc;
-#endif
+ if (post_prologue_pc != 0)
+ return max (pc, post_prologue_pc);
+
+ /* Can't determine prologue from the symbol table, need to examine
+ instructions. */
+
+ if (IS_MIPS16_ADDR (pc))
+ return mips16_skip_prologue (pc, lenient);
+ else
+ return mips32_skip_prologue (pc, lenient);
}
#if 0
-/* The lenient prologue stuff should be superceded by the code in
+/* The lenient prologue stuff should be superseded by the code in
init_extra_frame_info which looks to see whether the stores mentioned
in the proc_desc have actually taken place. */
char *valbuf;
{
int regnum;
+ int offset = 0;
+ int len = TYPE_LENGTH (valtype);
- regnum = TYPE_CODE (valtype) == TYPE_CODE_FLT && mips_fpu ? FP0_REGNUM : 2;
-
- memcpy (valbuf, regbuf + REGISTER_BYTE (regnum), TYPE_LENGTH (valtype));
-#ifdef REGISTER_CONVERT_TO_TYPE
- REGISTER_CONVERT_TO_TYPE(regnum, valtype, valbuf);
-#endif
+ regnum = 2;
+ if (TYPE_CODE (valtype) == TYPE_CODE_FLT
+ && (mips_fpu == MIPS_FPU_DOUBLE
+ || (mips_fpu == MIPS_FPU_SINGLE && len <= MIPS_REGSIZE)))
+ regnum = FP0_REGNUM;
+
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ { /* "un-left-justify" the value from the register */
+ if (len < REGISTER_RAW_SIZE (regnum))
+ offset = REGISTER_RAW_SIZE (regnum) - len;
+ if (len > REGISTER_RAW_SIZE (regnum) && /* odd-size structs */
+ len < REGISTER_RAW_SIZE (regnum) * 2 &&
+ (TYPE_CODE (valtype) == TYPE_CODE_STRUCT ||
+ TYPE_CODE (valtype) == TYPE_CODE_UNION))
+ offset = 2 * REGISTER_RAW_SIZE (regnum) - len;
+ }
+ memcpy (valbuf, regbuf + REGISTER_BYTE (regnum) + offset, len);
+ REGISTER_CONVERT_TO_TYPE (regnum, valtype, valbuf);
}
/* Given a return value in `regbuf' with a type `valtype',
char *valbuf;
{
int regnum;
+ int offset = 0;
+ int len = TYPE_LENGTH (valtype);
char raw_buffer[MAX_REGISTER_RAW_SIZE];
- regnum = TYPE_CODE (valtype) == TYPE_CODE_FLT && mips_fpu ? FP0_REGNUM : 2;
- memcpy(raw_buffer, valbuf, TYPE_LENGTH (valtype));
-
-#ifdef REGISTER_CONVERT_FROM_TYPE
+ regnum = 2;
+ if (TYPE_CODE (valtype) == TYPE_CODE_FLT
+ && (mips_fpu == MIPS_FPU_DOUBLE
+ || (mips_fpu == MIPS_FPU_SINGLE && len <= MIPS_REGSIZE)))
+ regnum = FP0_REGNUM;
+
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ { /* "left-justify" the value in the register */
+ if (len < REGISTER_RAW_SIZE (regnum))
+ offset = REGISTER_RAW_SIZE (regnum) - len;
+ if (len > REGISTER_RAW_SIZE (regnum) && /* odd-size structs */
+ len < REGISTER_RAW_SIZE (regnum) * 2 &&
+ (TYPE_CODE (valtype) == TYPE_CODE_STRUCT ||
+ TYPE_CODE (valtype) == TYPE_CODE_UNION))
+ offset = 2 * REGISTER_RAW_SIZE (regnum) - len;
+ }
+ memcpy(raw_buffer + offset, valbuf, len);
REGISTER_CONVERT_FROM_TYPE(regnum, valtype, raw_buffer);
-#endif
-
- write_register_bytes(REGISTER_BYTE (regnum), raw_buffer, TYPE_LENGTH (valtype));
+ write_register_bytes(REGISTER_BYTE (regnum), raw_buffer,
+ len > REGISTER_RAW_SIZE (regnum) ?
+ len : REGISTER_RAW_SIZE (regnum));
}
-/* These exist in mdebugread.c. */
-extern CORE_ADDR sigtramp_address, sigtramp_end;
-extern void fixup_sigtramp PARAMS ((void));
-
/* Exported procedure: Is PC in the signal trampoline code */
int
return (pc >= sigtramp_address && pc < sigtramp_end);
}
-static void reinit_frame_cache_sfunc PARAMS ((char *, int,
- struct cmd_list_element *));
+/* Command to set FPU type. mips_fpu_string will have been set to the
+ user's argument. Set mips_fpu based on mips_fpu_string, and then
+ canonicalize mips_fpu_string. */
+
+/*ARGSUSED*/
+static void
+mips_set_fpu_command (args, from_tty, c)
+ char *args;
+ int from_tty;
+ struct cmd_list_element *c;
+{
+ char *err = NULL;
+
+ if (mips_fpu_string == NULL || *mips_fpu_string == '\0')
+ mips_fpu = MIPS_FPU_DOUBLE;
+ else if (strcasecmp (mips_fpu_string, "double") == 0
+ || strcasecmp (mips_fpu_string, "on") == 0
+ || strcasecmp (mips_fpu_string, "1") == 0
+ || strcasecmp (mips_fpu_string, "yes") == 0)
+ mips_fpu = MIPS_FPU_DOUBLE;
+ else if (strcasecmp (mips_fpu_string, "none") == 0
+ || strcasecmp (mips_fpu_string, "off") == 0
+ || strcasecmp (mips_fpu_string, "0") == 0
+ || strcasecmp (mips_fpu_string, "no") == 0)
+ mips_fpu = MIPS_FPU_NONE;
+ else if (strcasecmp (mips_fpu_string, "single") == 0)
+ mips_fpu = MIPS_FPU_SINGLE;
+ else
+ err = strsave (mips_fpu_string);
+
+ if (mips_fpu_string != NULL)
+ free (mips_fpu_string);
+
+ switch (mips_fpu)
+ {
+ case MIPS_FPU_DOUBLE:
+ mips_fpu_string = strsave ("double");
+ break;
+ case MIPS_FPU_SINGLE:
+ mips_fpu_string = strsave ("single");
+ break;
+ case MIPS_FPU_NONE:
+ mips_fpu_string = strsave ("none");
+ break;
+ }
+
+ if (err != NULL)
+ {
+ struct cleanup *cleanups = make_cleanup (free, err);
+ error ("Unknown FPU type `%s'. Use `double', `none', or `single'.",
+ err);
+ do_cleanups (cleanups);
+ }
+}
+
+static void
+mips_show_fpu_command (args, from_tty, c)
+ char *args;
+ int from_tty;
+ struct cmd_list_element *c;
+{
+}
+
+/* Command to set the processor type. */
+
+void
+mips_set_processor_type_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ int i;
+
+ if (tmp_mips_processor_type == NULL || *tmp_mips_processor_type == '\0')
+ {
+ printf_unfiltered ("The known MIPS processor types are as follows:\n\n");
+ for (i = 0; mips_processor_type_table[i].name != NULL; ++i)
+ printf_unfiltered ("%s\n", mips_processor_type_table[i].name);
+
+ /* Restore the value. */
+ tmp_mips_processor_type = strsave (mips_processor_type);
+
+ return;
+ }
+
+ if (!mips_set_processor_type (tmp_mips_processor_type))
+ {
+ error ("Unknown processor type `%s'.", tmp_mips_processor_type);
+ /* Restore its value. */
+ tmp_mips_processor_type = strsave (mips_processor_type);
+ }
+}
+
+static void
+mips_show_processor_type_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+}
+
+/* Modify the actual processor type. */
+
+int
+mips_set_processor_type (str)
+ char *str;
+{
+ int i, j;
+
+ if (str == NULL)
+ return 0;
+
+ for (i = 0; mips_processor_type_table[i].name != NULL; ++i)
+ {
+ if (strcasecmp (str, mips_processor_type_table[i].name) == 0)
+ {
+ mips_processor_type = str;
+
+ for (j = 0; j < NUM_REGS; ++j)
+ reg_names[j] = mips_processor_type_table[i].regnames[j];
+
+ return 1;
+
+ /* FIXME tweak fpu flag too */
+ }
+ }
+
+ return 0;
+}
+
+/* Attempt to identify the particular processor model by reading the
+ processor id. */
+
+char *
+mips_read_processor_type ()
+{
+ CORE_ADDR prid;
+
+ prid = read_register (PRID_REGNUM);
+
+ if ((prid & ~0xf) == 0x700)
+ return savestring ("r3041", strlen("r3041"));
+
+ return NULL;
+}
/* Just like reinit_frame_cache, but with the right arguments to be
callable as an sfunc. */
+
static void
reinit_frame_cache_sfunc (args, from_tty, c)
char *args;
reinit_frame_cache ();
}
+static int
+gdb_print_insn_mips (memaddr, info)
+ bfd_vma memaddr;
+ disassemble_info *info;
+{
+ mips_extra_func_info_t proc_desc;
+
+ /* Search for the function containing this address. Set the low bit
+ of the address when searching, in case we were given an even address
+ that is the start of a 16-bit function. If we didn't do this,
+ the search would fail because the symbol table says the function
+ starts at an odd address, i.e. 1 byte past the given address. */
+ memaddr = ADDR_BITS_REMOVE (memaddr);
+ proc_desc = non_heuristic_proc_desc (MAKE_MIPS16_ADDR (memaddr), NULL);
+
+ /* Make an attempt to determine if this is a 16-bit function. If
+ the procedure descriptor exists and the address therein is odd,
+ it's definitely a 16-bit function. Otherwise, we have to just
+ guess that if the address passed in is odd, it's 16-bits. */
+ if (proc_desc)
+ info->mach = IS_MIPS16_ADDR (PROC_LOW_ADDR (proc_desc)) ? 16 : 0;
+ else
+ info->mach = IS_MIPS16_ADDR (memaddr) ? 16 : 0;
+
+ /* Round down the instruction address to the appropriate boundary. */
+ memaddr &= (info->mach == 16 ? ~1 : ~3);
+
+ /* Call the appropriate disassembler based on the target endian-ness. */
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ return print_insn_big_mips (memaddr, info);
+ else
+ return print_insn_little_mips (memaddr, info);
+}
+
+/* This function implements the BREAKPOINT_FROM_PC macro. It uses the program
+ counter value to determine whether a 16- or 32-bit breakpoint should be
+ used. It returns a pointer to a string of bytes that encode a breakpoint
+ instruction, stores the length of the string to *lenptr, and adjusts pc
+ (if necessary) to point to the actual memory location where the
+ breakpoint should be inserted. */
+
+unsigned char *mips_breakpoint_from_pc (pcptr, lenptr)
+ CORE_ADDR *pcptr;
+ int *lenptr;
+{
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ {
+ if (IS_MIPS16_ADDR (*pcptr))
+ {
+ static char mips16_big_breakpoint[] = MIPS16_BIG_BREAKPOINT;
+ *pcptr = UNMAKE_MIPS16_ADDR (*pcptr);
+ *lenptr = sizeof(mips16_big_breakpoint);
+ return mips16_big_breakpoint;
+ }
+ else
+ {
+ static char big_breakpoint[] = BIG_BREAKPOINT;
+ static char pmon_big_breakpoint[] = PMON_BIG_BREAKPOINT;
+ static char idt_big_breakpoint[] = IDT_BIG_BREAKPOINT;
+
+ *lenptr = sizeof(big_breakpoint);
+
+ if (strcmp (target_shortname, "mips") == 0)
+ return idt_big_breakpoint;
+ else if (strcmp (target_shortname, "ddb") == 0
+ || strcmp (target_shortname, "pmon") == 0
+ || strcmp (target_shortname, "lsi") == 0)
+ return pmon_big_breakpoint;
+ else
+ return big_breakpoint;
+ }
+ }
+ else
+ {
+ if (IS_MIPS16_ADDR (*pcptr))
+ {
+ static char mips16_little_breakpoint[] = MIPS16_LITTLE_BREAKPOINT;
+ *pcptr = UNMAKE_MIPS16_ADDR (*pcptr);
+ *lenptr = sizeof(mips16_little_breakpoint);
+ return mips16_little_breakpoint;
+ }
+ else
+ {
+ static char little_breakpoint[] = LITTLE_BREAKPOINT;
+ static char pmon_little_breakpoint[] = PMON_LITTLE_BREAKPOINT;
+ static char idt_little_breakpoint[] = IDT_LITTLE_BREAKPOINT;
+
+ *lenptr = sizeof(little_breakpoint);
+
+ if (strcmp (target_shortname, "mips") == 0)
+ return idt_little_breakpoint;
+ else if (strcmp (target_shortname, "ddb") == 0
+ || strcmp (target_shortname, "pmon") == 0
+ || strcmp (target_shortname, "lsi") == 0)
+ return pmon_little_breakpoint;
+ else
+ return little_breakpoint;
+ }
+ }
+}
+
+/* Test whether the PC points to the return instruction at the
+ end of a function. This implements the ABOUT_TO_RETURN macro. */
+
+int
+mips_about_to_return (pc)
+ CORE_ADDR pc;
+{
+ if (IS_MIPS16_ADDR (pc))
+ /* This mips16 case isn't necessarily reliable. Sometimes the compiler
+ generates a "jr $ra"; other times it generates code to load
+ the return address from the stack to an accessible register (such
+ as $a3), then a "jr" using that register. This second case
+ is almost impossible to distinguish from an indirect jump
+ used for switch statements, so we don't even try. */
+ return mips_fetch_instruction (pc) == 0xe820; /* jr $ra */
+ else
+ return mips_fetch_instruction (pc) == 0x3e00008; /* jr $ra */
+}
+
+
+/* If PC is in a mips16 call or return stub, return the address of the target
+ PC, which is either the callee or the caller. There are several
+ cases which must be handled:
+
+ * If the PC is in __mips16_ret_{d,s}f, this is a return stub and the
+ target PC is in $31 ($ra).
+ * If the PC is in __mips16_call_stub_{1..10}, this is a call stub
+ and the target PC is in $2.
+ * If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
+ before the jal instruction, this is effectively a call stub
+ and the the target PC is in $2. Otherwise this is effectively
+ a return stub and the target PC is in $18.
+
+ See the source code for the stubs in gcc/config/mips/mips16.S for
+ gory details.
+
+ This function implements the SKIP_TRAMPOLINE_CODE macro.
+*/
+
+CORE_ADDR
+mips_skip_stub (pc)
+ CORE_ADDR pc;
+{
+ char *name;
+ CORE_ADDR start_addr;
+
+ /* Find the starting address and name of the function containing the PC. */
+ if (find_pc_partial_function (pc, &name, &start_addr, NULL) == 0)
+ return 0;
+
+ /* If the PC is in __mips16_ret_{d,s}f, this is a return stub and the
+ target PC is in $31 ($ra). */
+ if (strcmp (name, "__mips16_ret_sf") == 0
+ || strcmp (name, "__mips16_ret_df") == 0)
+ return read_register (RA_REGNUM);
+
+ if (strncmp (name, "__mips16_call_stub_", 19) == 0)
+ {
+ /* If the PC is in __mips16_call_stub_{1..10}, this is a call stub
+ and the target PC is in $2. */
+ if (name[19] >= '0' && name[19] <= '9')
+ return read_register (2);
+
+ /* If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
+ before the jal instruction, this is effectively a call stub
+ and the the target PC is in $2. Otherwise this is effectively
+ a return stub and the target PC is in $18. */
+ else if (name[19] == 's' || name[19] == 'd')
+ {
+ if (pc == start_addr)
+ {
+ /* Check if the target of the stub is a compiler-generated
+ stub. Such a stub for a function bar might have a name
+ like __fn_stub_bar, and might look like this:
+ mfc1 $4,$f13
+ mfc1 $5,$f12
+ mfc1 $6,$f15
+ mfc1 $7,$f14
+ la $1,bar (becomes a lui/addiu pair)
+ jr $1
+ So scan down to the lui/addi and extract the target
+ address from those two instructions. */
+
+ CORE_ADDR target_pc = read_register (2);
+ t_inst inst;
+ int i;
+
+ /* See if the name of the target function is __fn_stub_*. */
+ if (find_pc_partial_function (target_pc, &name, NULL, NULL) == 0)
+ return target_pc;
+ if (strncmp (name, "__fn_stub_", 10) != 0
+ && strcmp (name, "etext") != 0
+ && strcmp (name, "_etext") != 0)
+ return target_pc;
+
+ /* Scan through this _fn_stub_ code for the lui/addiu pair.
+ The limit on the search is arbitrarily set to 20
+ instructions. FIXME. */
+ for (i = 0, pc = 0; i < 20; i++, target_pc += MIPS_INSTLEN)
+ {
+ inst = mips_fetch_instruction (target_pc);
+ if ((inst & 0xffff0000) == 0x3c010000) /* lui $at */
+ pc = (inst << 16) & 0xffff0000; /* high word */
+ else if ((inst & 0xffff0000) == 0x24210000) /* addiu $at */
+ return pc | (inst & 0xffff); /* low word */
+ }
+
+ /* Couldn't find the lui/addui pair, so return stub address. */
+ return target_pc;
+ }
+ else
+ /* This is the 'return' part of a call stub. The return
+ address is in $r18. */
+ return read_register (18);
+ }
+ }
+ return 0; /* not a stub */
+}
+
+
+/* Return non-zero if the PC is inside a call thunk (aka stub or trampoline).
+ This implements the IN_SOLIB_CALL_TRAMPOLINE macro. */
+
+int
+mips_in_call_stub (pc, name)
+ CORE_ADDR pc;
+ char *name;
+{
+ CORE_ADDR start_addr;
+
+ /* Find the starting address of the function containing the PC. If the
+ caller didn't give us a name, look it up at the same time. */
+ if (find_pc_partial_function (pc, name ? NULL : &name, &start_addr, NULL) == 0)
+ return 0;
+
+ if (strncmp (name, "__mips16_call_stub_", 19) == 0)
+ {
+ /* If the PC is in __mips16_call_stub_{1..10}, this is a call stub. */
+ if (name[19] >= '0' && name[19] <= '9')
+ return 1;
+ /* If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
+ before the jal instruction, this is effectively a call stub. */
+ else if (name[19] == 's' || name[19] == 'd')
+ return pc == start_addr;
+ }
+
+ return 0; /* not a stub */
+}
+
+
+/* Return non-zero if the PC is inside a return thunk (aka stub or trampoline).
+ This implements the IN_SOLIB_RETURN_TRAMPOLINE macro. */
+
+int
+mips_in_return_stub (pc, name)
+ CORE_ADDR pc;
+ char *name;
+{
+ CORE_ADDR start_addr;
+
+ /* Find the starting address of the function containing the PC. */
+ if (find_pc_partial_function (pc, NULL, &start_addr, NULL) == 0)
+ return 0;
+
+ /* If the PC is in __mips16_ret_{d,s}f, this is a return stub. */
+ if (strcmp (name, "__mips16_ret_sf") == 0
+ || strcmp (name, "__mips16_ret_df") == 0)
+ return 1;
+
+ /* If the PC is in __mips16_call_stub_{s,d}f_{0..10} but not at the start,
+ i.e. after the jal instruction, this is effectively a return stub. */
+ if (strncmp (name, "__mips16_call_stub_", 19) == 0
+ && (name[19] == 's' || name[19] == 'd')
+ && pc != start_addr)
+ return 1;
+
+ return 0; /* not a stub */
+}
+
+
+/* Return non-zero if the PC is in a library helper function that should
+ be ignored. This implements the IGNORE_HELPER_CALL macro. */
+
+int
+mips_ignore_helper (pc)
+ CORE_ADDR pc;
+{
+ char *name;
+
+ /* Find the starting address and name of the function containing the PC. */
+ if (find_pc_partial_function (pc, &name, NULL, NULL) == 0)
+ return 0;
+
+ /* If the PC is in __mips16_ret_{d,s}f, this is a library helper function
+ that we want to ignore. */
+ return (strcmp (name, "__mips16_ret_sf") == 0
+ || strcmp (name, "__mips16_ret_df") == 0);
+}
+
+
void
_initialize_mips_tdep ()
{
struct cmd_list_element *c;
+ tm_print_insn = gdb_print_insn_mips;
+
/* Let the user turn off floating point and set the fence post for
heuristic_proc_start. */
- add_show_from_set
- (add_set_cmd ("mipsfpu", class_support, var_boolean,
- (char *) &mips_fpu,
- "Set use of floating point coprocessor.\n\
-Turn off to avoid using floating point instructions when calling functions\n\
-or dealing with return values.", &setlist),
- &showlist);
+ c = add_set_cmd ("mipsfpu", class_support, var_string_noescape,
+ (char *) &mips_fpu_string,
+ "Set use of floating point coprocessor.\n\
+Set to `none' to avoid using floating point instructions when calling\n\
+functions or dealing with return values. Set to `single' to use only\n\
+single precision floating point as on the R4650. Set to `double' for\n\
+normal floating point support.",
+ &setlist);
+ c->function.sfunc = mips_set_fpu_command;
+ c = add_show_from_set (c, &showlist);
+ c->function.sfunc = mips_show_fpu_command;
+
+ mips_fpu = MIPS_FPU_DOUBLE;
+ mips_fpu_string = strsave ("double");
+
+ c = add_set_cmd ("processor", class_support, var_string_noescape,
+ (char *) &tmp_mips_processor_type,
+ "Set the type of MIPS processor in use.\n\
+Set this to be able to access processor-type-specific registers.\n\
+",
+ &setlist);
+ c->function.cfunc = mips_set_processor_type_command;
+ c = add_show_from_set (c, &showlist);
+ c->function.cfunc = mips_show_processor_type_command;
+
+ tmp_mips_processor_type = strsave (DEFAULT_MIPS_TYPE);
+ mips_set_processor_type_command (strsave (DEFAULT_MIPS_TYPE), 0);
/* We really would like to have both "0" and "unlimited" work, but
command.c doesn't deal with that. So make it a var_zinteger
projects / deliverable / binutils-gdb.git / blobdiff