/* Target-dependent code for the MIPS architecture, for GDB, the GNU Debugger.
- Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
- 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
- 2010, 2011 Free Software Foundation, Inc.
+ Copyright (C) 1988-2014 Free Software Foundation, Inc.
Contributed by Alessandro Forin(af@cs.cmu.edu) at CMU
and by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin.
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
-#include "gdb_string.h"
-#include "gdb_assert.h"
#include "frame.h"
#include "inferior.h"
#include "symtab.h"
static struct type *mips_register_type (struct gdbarch *gdbarch, int regnum);
+static int mips32_instruction_has_delay_slot (struct gdbarch *gdbarch,
+ ULONGEST inst);
+static int micromips_instruction_has_delay_slot (ULONGEST insn, int mustbe32);
+static int mips16_instruction_has_delay_slot (unsigned short inst,
+ int mustbe32);
+
+static int mips32_insn_at_pc_has_delay_slot (struct gdbarch *gdbarch,
+ CORE_ADDR addr);
+static int micromips_insn_at_pc_has_delay_slot (struct gdbarch *gdbarch,
+ CORE_ADDR addr, int mustbe32);
+static int mips16_insn_at_pc_has_delay_slot (struct gdbarch *gdbarch,
+ CORE_ADDR addr, int mustbe32);
+
/* A useful bit in the CP0 status register (MIPS_PS_REGNUM). */
/* This bit is set if we are emulating 32-bit FPRs on a 64-bit chip. */
#define ST0_FR (1 << 26)
static const char *mips_abi_string;
-static const char *mips_abi_strings[] = {
+static const char *const mips_abi_strings[] = {
"auto",
"n32",
"o32",
NULL
};
+/* For backwards compatibility we default to MIPS16. This flag is
+ overridden as soon as unambiguous ELF file flags tell us the
+ compressed ISA encoding used. */
+static const char mips_compression_mips16[] = "mips16";
+static const char mips_compression_micromips[] = "micromips";
+static const char *const mips_compression_strings[] =
+{
+ mips_compression_mips16,
+ mips_compression_micromips,
+ NULL
+};
+
+static const char *mips_compression_string = mips_compression_mips16;
+
/* The standard register names, and all the valid aliases for them. */
struct register_alias
{
static int mips_fpu_type_auto = 1;
static enum mips_fpu_type mips_fpu_type = MIPS_DEFAULT_FPU_TYPE;
-static int mips_debug = 0;
+static unsigned int mips_debug = 0;
/* Properties (for struct target_desc) describing the g/G packet
layout. */
return mips_regnum (gdbarch)->fp0 + 12;
}
+/* Return 1 if REGNUM refers to a floating-point general register, raw
+ or cooked. Otherwise return 0. */
+
+static int
+mips_float_register_p (struct gdbarch *gdbarch, int regnum)
+{
+ int rawnum = regnum % gdbarch_num_regs (gdbarch);
+
+ return (rawnum >= mips_regnum (gdbarch)->fp0
+ && rawnum < mips_regnum (gdbarch)->fp0 + 32);
+}
+
#define MIPS_EABI(gdbarch) (gdbarch_tdep (gdbarch)->mips_abi \
== MIPS_ABI_EABI32 \
|| gdbarch_tdep (gdbarch)->mips_abi == MIPS_ABI_EABI64)
#define MIPS_FPU_TYPE(gdbarch) (gdbarch_tdep (gdbarch)->mips_fpu_type)
-/* MIPS16 function addresses are odd (bit 0 is set). Here are some
- functions to test, set, or clear bit 0 of addresses. */
-
-static CORE_ADDR
-is_mips16_addr (CORE_ADDR addr)
-{
- return ((addr) & 1);
-}
-
-static CORE_ADDR
-unmake_mips16_addr (CORE_ADDR addr)
-{
- return ((addr) & ~(CORE_ADDR) 1);
-}
-
-static CORE_ADDR
-make_mips16_addr (CORE_ADDR addr)
-{
- return ((addr) | (CORE_ADDR) 1);
-}
-
/* Return the MIPS ABI associated with GDBARCH. */
enum mips_abi
mips_abi (struct gdbarch *gdbarch)
}
}
+/* MIPS16/microMIPS function addresses are odd (bit 0 is set). Here
+ are some functions to handle addresses associated with compressed
+ code including but not limited to testing, setting, or clearing
+ bit 0 of such addresses. */
+
+/* Return one iff compressed code is the MIPS16 instruction set. */
+
+static int
+is_mips16_isa (struct gdbarch *gdbarch)
+{
+ return gdbarch_tdep (gdbarch)->mips_isa == ISA_MIPS16;
+}
+
+/* Return one iff compressed code is the microMIPS instruction set. */
+
+static int
+is_micromips_isa (struct gdbarch *gdbarch)
+{
+ return gdbarch_tdep (gdbarch)->mips_isa == ISA_MICROMIPS;
+}
+
+/* Return one iff ADDR denotes compressed code. */
+
+static int
+is_compact_addr (CORE_ADDR addr)
+{
+ return ((addr) & 1);
+}
+
+/* Return one iff ADDR denotes standard ISA code. */
+
+static int
+is_mips_addr (CORE_ADDR addr)
+{
+ return !is_compact_addr (addr);
+}
+
+/* Return one iff ADDR denotes MIPS16 code. */
+
+static int
+is_mips16_addr (struct gdbarch *gdbarch, CORE_ADDR addr)
+{
+ return is_compact_addr (addr) && is_mips16_isa (gdbarch);
+}
+
+/* Return one iff ADDR denotes microMIPS code. */
+
+static int
+is_micromips_addr (struct gdbarch *gdbarch, CORE_ADDR addr)
+{
+ return is_compact_addr (addr) && is_micromips_isa (gdbarch);
+}
+
+/* Strip the ISA (compression) bit off from ADDR. */
+
+static CORE_ADDR
+unmake_compact_addr (CORE_ADDR addr)
+{
+ return ((addr) & ~(CORE_ADDR) 1);
+}
+
+/* Add the ISA (compression) bit to ADDR. */
+
+static CORE_ADDR
+make_compact_addr (CORE_ADDR addr)
+{
+ return ((addr) | (CORE_ADDR) 1);
+}
+
+/* Extern version of unmake_compact_addr; we use a separate function
+ so that unmake_compact_addr can be inlined throughout this file. */
+
+CORE_ADDR
+mips_unmake_compact_addr (CORE_ADDR addr)
+{
+ return unmake_compact_addr (addr);
+}
+
/* Functions for setting and testing a bit in a minimal symbol that
- marks it as 16-bit function. The MSB of the minimal symbol's
- "info" field is used for this purpose.
+ marks it as MIPS16 or microMIPS function. The MSB of the minimal
+ symbol's "info" field is used for this purpose.
- gdbarch_elf_make_msymbol_special tests whether an ELF symbol is "special",
- i.e. refers to a 16-bit function, and sets a "special" bit in a
- minimal symbol to mark it as a 16-bit function
+ gdbarch_elf_make_msymbol_special tests whether an ELF symbol is
+ "special", i.e. refers to a MIPS16 or microMIPS function, and sets
+ one of the "special" bits in a minimal symbol to mark it accordingly.
+ The test checks an ELF-private flag that is valid for true function
+ symbols only; for synthetic symbols such as for PLT stubs that have
+ no ELF-private part at all the MIPS BFD backend arranges for this
+ information to be carried in the asymbol's udata field instead.
- MSYMBOL_IS_SPECIAL tests the "special" bit in a minimal symbol */
+ msymbol_is_mips16 and msymbol_is_micromips test the "special" bit
+ in a minimal symbol. */
static void
mips_elf_make_msymbol_special (asymbol * sym, struct minimal_symbol *msym)
{
- if (((elf_symbol_type *) (sym))->internal_elf_sym.st_other == STO_MIPS16)
+ elf_symbol_type *elfsym = (elf_symbol_type *) sym;
+ unsigned char st_other;
+
+ if ((sym->flags & BSF_SYNTHETIC) == 0)
+ st_other = elfsym->internal_elf_sym.st_other;
+ else if ((sym->flags & BSF_FUNCTION) != 0)
+ st_other = sym->udata.i;
+ else
+ return;
+
+ if (ELF_ST_IS_MICROMIPS (st_other))
+ {
+ MSYMBOL_TARGET_FLAG_2 (msym) = 1;
+ SET_MSYMBOL_VALUE_ADDRESS (msym, MSYMBOL_VALUE_RAW_ADDRESS (msym) | 1);
+ }
+ else if (ELF_ST_IS_MIPS16 (st_other))
{
MSYMBOL_TARGET_FLAG_1 (msym) = 1;
+ SET_MSYMBOL_VALUE_ADDRESS (msym, MSYMBOL_VALUE_RAW_ADDRESS (msym) | 1);
}
}
+/* Return one iff MSYM refers to standard ISA code. */
+
+static int
+msymbol_is_mips (struct minimal_symbol *msym)
+{
+ return !(MSYMBOL_TARGET_FLAG_1 (msym) | MSYMBOL_TARGET_FLAG_2 (msym));
+}
+
+/* Return one iff MSYM refers to MIPS16 code. */
+
static int
-msymbol_is_special (struct minimal_symbol *msym)
+msymbol_is_mips16 (struct minimal_symbol *msym)
{
return MSYMBOL_TARGET_FLAG_1 (msym);
}
+/* Return one iff MSYM refers to microMIPS code. */
+
+static int
+msymbol_is_micromips (struct minimal_symbol *msym)
+{
+ return MSYMBOL_TARGET_FLAG_2 (msym);
+}
+
+/* Set the ISA bit in the main symbol too, complementing the corresponding
+ minimal symbol setting and reflecting the run-time value of the symbol.
+ The need for comes from the ISA bit having been cleared as code in
+ `_bfd_mips_elf_symbol_processing' separated it into the ELF symbol's
+ `st_other' STO_MIPS16 or STO_MICROMIPS annotation, making the values
+ of symbols referring to compressed code different in GDB to the values
+ used by actual code. That in turn makes them evaluate incorrectly in
+ expressions, producing results different to what the same expressions
+ yield when compiled into the program being debugged. */
+
+static void
+mips_make_symbol_special (struct symbol *sym, struct objfile *objfile)
+{
+ if (SYMBOL_CLASS (sym) == LOC_BLOCK)
+ {
+ /* We are in symbol reading so it is OK to cast away constness. */
+ struct block *block = (struct block *) SYMBOL_BLOCK_VALUE (sym);
+ CORE_ADDR compact_block_start;
+ struct bound_minimal_symbol msym;
+
+ compact_block_start = BLOCK_START (block) | 1;
+ msym = lookup_minimal_symbol_by_pc (compact_block_start);
+ if (msym.minsym && !msymbol_is_mips (msym.minsym))
+ {
+ BLOCK_START (block) = compact_block_start;
+ }
+ }
+}
+
/* XFER a value from the big/little/left end of the register.
Depending on the size of the value it might occupy the entire
register or just part of it. Make an allowance for this, aligning
"f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
"f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
"f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
- "fsr", "fir", "" /*"fp" */ , "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
+ "fsr", "fir",
};
/* Names of IDT R3041 registers. */
"", "", "", "", "", "", "", "",
"", "", "", "",
"", "", "", "", "", "", "", "",
- "", "", "config", "cache", "debug", "depc", "epc", ""
+ "", "", "config", "cache", "debug", "depc", "epc",
};
/* Names of IRIX registers. */
"pc", "cause", "bad", "hi", "lo", "fsr", "fir"
};
+/* Names of registers with Linux kernels. */
+static const char *mips_linux_reg_names[NUM_MIPS_PROCESSOR_REGS] = {
+ "sr", "lo", "hi", "bad", "cause", "pc",
+ "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
+ "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
+ "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
+ "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
+ "fsr", "fir"
+};
+
/* Return the name of the register corresponding to REGNO. */
static const char *
else if (32 <= rawnum && rawnum < gdbarch_num_regs (gdbarch))
{
gdb_assert (rawnum - 32 < NUM_MIPS_PROCESSOR_REGS);
- return tdep->mips_processor_reg_names[rawnum - 32];
+ if (tdep->mips_processor_reg_names[rawnum - 32])
+ return tdep->mips_processor_reg_names[rawnum - 32];
+ return "";
}
else
internal_error (__FILE__, __LINE__,
return 0;
}
-/* Table to translate MIPS16 register field to actual register number. */
-static int mips16_to_32_reg[8] = { 16, 17, 2, 3, 4, 5, 6, 7 };
+/* Table to translate 3-bit register field to actual register number. */
+static const signed char mips_reg3_to_reg[8] = { 16, 17, 2, 3, 4, 5, 6, 7 };
/* Heuristic_proc_start may hunt through the text section for a long
time across a 2400 baud serial line. Allows the user to limit this
search. */
-static unsigned int heuristic_fence_post = 0;
+static int heuristic_fence_post = 0;
/* Number of bytes of storage in the actual machine representation for
register N. NOTE: This defines the pseudo register type so need to
{
return (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG
&& register_size (gdbarch, regnum) == 4
- && (regnum % gdbarch_num_regs (gdbarch))
- >= mips_regnum (gdbarch)->fp0
- && (regnum % gdbarch_num_regs (gdbarch))
- < mips_regnum (gdbarch)->fp0 + 32
+ && mips_float_register_p (gdbarch, regnum)
&& TYPE_CODE (type) == TYPE_CODE_FLT && TYPE_LENGTH (type) == 8);
}
mips_convert_register_p (struct gdbarch *gdbarch,
int regnum, struct type *type)
{
- return mips_convert_register_float_case_p (gdbarch, regnum, type)
- || mips_convert_register_gpreg_case_p (gdbarch, regnum, type);
+ return (mips_convert_register_float_case_p (gdbarch, regnum, type)
+ || mips_convert_register_gpreg_case_p (gdbarch, regnum, type));
}
-static void
+static int
mips_register_to_value (struct frame_info *frame, int regnum,
- struct type *type, gdb_byte *to)
+ struct type *type, gdb_byte *to,
+ int *optimizedp, int *unavailablep)
{
struct gdbarch *gdbarch = get_frame_arch (frame);
{
get_frame_register (frame, regnum + 0, to + 4);
get_frame_register (frame, regnum + 1, to + 0);
+
+ if (!get_frame_register_bytes (frame, regnum + 0, 0, 4, to + 4,
+ optimizedp, unavailablep))
+ return 0;
+
+ if (!get_frame_register_bytes (frame, regnum + 1, 0, 4, to + 0,
+ optimizedp, unavailablep))
+ return 0;
+ *optimizedp = *unavailablep = 0;
+ return 1;
}
else if (mips_convert_register_gpreg_case_p (gdbarch, regnum, type))
{
int len = TYPE_LENGTH (type);
- if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
- get_frame_register_bytes (frame, regnum, 8 - len, len, to);
- else
- get_frame_register_bytes (frame, regnum, 0, len, to);
+ CORE_ADDR offset;
+
+ offset = gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG ? 8 - len : 0;
+ if (!get_frame_register_bytes (frame, regnum, offset, len, to,
+ optimizedp, unavailablep))
+ return 0;
+
+ *optimizedp = *unavailablep = 0;
+ return 1;
}
else
{
mips_register_type (struct gdbarch *gdbarch, int regnum)
{
gdb_assert (regnum >= 0 && regnum < 2 * gdbarch_num_regs (gdbarch));
- if ((regnum % gdbarch_num_regs (gdbarch)) >= mips_regnum (gdbarch)->fp0
- && (regnum % gdbarch_num_regs (gdbarch))
- < mips_regnum (gdbarch)->fp0 + 32)
+ if (mips_float_register_p (gdbarch, regnum))
{
/* The floating-point registers raw, or cooked, always match
mips_isa_regsize(), and also map 1:1, byte for byte. */
}
else
{
+ int rawnum = regnum - gdbarch_num_regs (gdbarch);
+
/* The cooked or ABI registers. These are sized according to
the ABI (with a few complications). */
- if (regnum >= (gdbarch_num_regs (gdbarch)
- + mips_regnum (gdbarch)->fp_control_status)
- && regnum <= gdbarch_num_regs (gdbarch) + MIPS_LAST_EMBED_REGNUM)
+ if (rawnum == mips_regnum (gdbarch)->fp_control_status
+ || rawnum == mips_regnum (gdbarch)->fp_implementation_revision)
+ return builtin_type (gdbarch)->builtin_int32;
+ else if (gdbarch_osabi (gdbarch) != GDB_OSABI_IRIX
+ && gdbarch_osabi (gdbarch) != GDB_OSABI_LINUX
+ && rawnum >= MIPS_FIRST_EMBED_REGNUM
+ && rawnum <= MIPS_LAST_EMBED_REGNUM)
/* The pseudo/cooked view of the embedded registers is always
32-bit. The raw view is handled below. */
return builtin_type (gdbarch)->builtin_int32;
mips_pseudo_register_type (struct gdbarch *gdbarch, int regnum)
{
const int num_regs = gdbarch_num_regs (gdbarch);
- struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
int rawnum = regnum % num_regs;
struct type *rawtype;
if (TYPE_LENGTH (rawtype) == 0)
return rawtype;
- if (rawnum >= MIPS_EMBED_FP0_REGNUM && rawnum < MIPS_EMBED_FP0_REGNUM + 32)
+ if (mips_float_register_p (gdbarch, rawnum))
/* Present the floating point registers however the hardware did;
do not try to convert between FPU layouts. */
return rawtype;
- if (rawnum >= MIPS_EMBED_FP0_REGNUM + 32 && rawnum <= MIPS_LAST_EMBED_REGNUM)
- {
- /* The pseudo/cooked view of embedded registers is always
- 32-bit, even if the target transfers 64-bit values for them.
- New targets relying on XML descriptions should only transfer
- the necessary 32 bits, but older versions of GDB expected 64,
- so allow the target to provide 64 bits without interfering
- with the displayed type. */
- return builtin_type (gdbarch)->builtin_int32;
- }
-
/* Use pointer types for registers if we can. For n32 we can not,
since we do not have a 64-bit pointer type. */
if (mips_abi_regsize (gdbarch)
== TYPE_LENGTH (builtin_type (gdbarch)->builtin_data_ptr))
{
- if (rawnum == MIPS_SP_REGNUM || rawnum == MIPS_EMBED_BADVADDR_REGNUM)
+ if (rawnum == MIPS_SP_REGNUM
+ || rawnum == mips_regnum (gdbarch)->badvaddr)
return builtin_type (gdbarch)->builtin_data_ptr;
- else if (rawnum == MIPS_EMBED_PC_REGNUM)
+ else if (rawnum == mips_regnum (gdbarch)->pc)
return builtin_type (gdbarch)->builtin_func_ptr;
}
if (mips_abi_regsize (gdbarch) == 4 && TYPE_LENGTH (rawtype) == 8
- && rawnum >= MIPS_ZERO_REGNUM && rawnum <= MIPS_EMBED_PC_REGNUM)
+ && ((rawnum >= MIPS_ZERO_REGNUM && rawnum <= MIPS_PS_REGNUM)
+ || rawnum == mips_regnum (gdbarch)->lo
+ || rawnum == mips_regnum (gdbarch)->hi
+ || rawnum == mips_regnum (gdbarch)->badvaddr
+ || rawnum == mips_regnum (gdbarch)->cause
+ || rawnum == mips_regnum (gdbarch)->pc
+ || (mips_regnum (gdbarch)->dspacc != -1
+ && rawnum >= mips_regnum (gdbarch)->dspacc
+ && rawnum < mips_regnum (gdbarch)->dspacc + 6)))
return builtin_type (gdbarch)->builtin_int32;
+ if (gdbarch_osabi (gdbarch) != GDB_OSABI_IRIX
+ && gdbarch_osabi (gdbarch) != GDB_OSABI_LINUX
+ && rawnum >= MIPS_EMBED_FP0_REGNUM + 32
+ && rawnum <= MIPS_LAST_EMBED_REGNUM)
+ {
+ /* The pseudo/cooked view of embedded registers is always
+ 32-bit, even if the target transfers 64-bit values for them.
+ New targets relying on XML descriptions should only transfer
+ the necessary 32 bits, but older versions of GDB expected 64,
+ so allow the target to provide 64 bits without interfering
+ with the displayed type. */
+ return builtin_type (gdbarch)->builtin_int32;
+ }
+
/* For all other registers, pass through the hardware type. */
return rawtype;
}
show_mask_address (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- struct gdbarch_tdep *tdep = gdbarch_tdep (target_gdbarch);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (target_gdbarch ());
deprecated_show_value_hack (file, from_tty, c, value);
switch (mask_address_var)
}
}
+/* Tell if the program counter value in MEMADDR is in a standard ISA
+ function. */
+
+int
+mips_pc_is_mips (CORE_ADDR memaddr)
+{
+ struct bound_minimal_symbol sym;
+
+ /* Flags indicating that this is a MIPS16 or microMIPS function is
+ stored by elfread.c in the high bit of the info field. Use this
+ to decide if the function is standard MIPS. Otherwise if bit 0
+ of the address is clear, then this is a standard MIPS function. */
+ sym = lookup_minimal_symbol_by_pc (make_compact_addr (memaddr));
+ if (sym.minsym)
+ return msymbol_is_mips (sym.minsym);
+ else
+ return is_mips_addr (memaddr);
+}
+
/* Tell if the program counter value in MEMADDR is in a MIPS16 function. */
int
-mips_pc_is_mips16 (CORE_ADDR memaddr)
+mips_pc_is_mips16 (struct gdbarch *gdbarch, CORE_ADDR memaddr)
{
- struct minimal_symbol *sym;
+ struct bound_minimal_symbol sym;
- /* If bit 0 of the address is set, assume this is a MIPS16 address. */
- if (is_mips16_addr (memaddr))
- return 1;
+ /* A flag indicating that this is a MIPS16 function is stored by
+ elfread.c in the high bit of the info field. Use this to decide
+ if the function is MIPS16. Otherwise if bit 0 of the address is
+ set, then ELF file flags will tell if this is a MIPS16 function. */
+ sym = lookup_minimal_symbol_by_pc (make_compact_addr (memaddr));
+ if (sym.minsym)
+ return msymbol_is_mips16 (sym.minsym);
+ else
+ return is_mips16_addr (gdbarch, memaddr);
+}
+
+/* Tell if the program counter value in MEMADDR is in a microMIPS function. */
- /* A flag indicating that this is a MIPS16 function is stored by elfread.c in
- the high bit of the info field. Use this to decide if the function is
- MIPS16 or normal MIPS. */
- sym = lookup_minimal_symbol_by_pc (memaddr);
- if (sym)
- return msymbol_is_special (sym);
+int
+mips_pc_is_micromips (struct gdbarch *gdbarch, CORE_ADDR memaddr)
+{
+ struct bound_minimal_symbol sym;
+
+ /* A flag indicating that this is a microMIPS function is stored by
+ elfread.c in the high bit of the info field. Use this to decide
+ if the function is microMIPS. Otherwise if bit 0 of the address
+ is set, then ELF file flags will tell if this is a microMIPS
+ function. */
+ sym = lookup_minimal_symbol_by_pc (make_compact_addr (memaddr));
+ if (sym.minsym)
+ return msymbol_is_micromips (sym.minsym);
+ else
+ return is_micromips_addr (gdbarch, memaddr);
+}
+
+/* Tell the ISA type of the function the program counter value in MEMADDR
+ is in. */
+
+static enum mips_isa
+mips_pc_isa (struct gdbarch *gdbarch, CORE_ADDR memaddr)
+{
+ struct bound_minimal_symbol sym;
+
+ /* A flag indicating that this is a MIPS16 or a microMIPS function
+ is stored by elfread.c in the high bit of the info field. Use
+ this to decide if the function is MIPS16 or microMIPS or normal
+ MIPS. Otherwise if bit 0 of the address is set, then ELF file
+ flags will tell if this is a MIPS16 or a microMIPS function. */
+ sym = lookup_minimal_symbol_by_pc (make_compact_addr (memaddr));
+ if (sym.minsym)
+ {
+ if (msymbol_is_micromips (sym.minsym))
+ return ISA_MICROMIPS;
+ else if (msymbol_is_mips16 (sym.minsym))
+ return ISA_MIPS16;
+ else
+ return ISA_MIPS;
+ }
else
+ {
+ if (is_mips_addr (memaddr))
+ return ISA_MIPS;
+ else if (is_micromips_addr (gdbarch, memaddr))
+ return ISA_MICROMIPS;
+ else
+ return ISA_MIPS16;
+ }
+}
+
+/* Set the ISA bit correctly in the PC, used by DWARF-2 machinery.
+ The need for comes from the ISA bit having been cleared, making
+ addresses in FDE, range records, etc. referring to compressed code
+ different to those in line information, the symbol table and finally
+ the PC register. That in turn confuses many operations. */
+
+static CORE_ADDR
+mips_adjust_dwarf2_addr (CORE_ADDR pc)
+{
+ pc = unmake_compact_addr (pc);
+ return mips_pc_is_mips (pc) ? pc : make_compact_addr (pc);
+}
+
+/* Recalculate the line record requested so that the resulting PC has
+ the ISA bit set correctly, used by DWARF-2 machinery. The need for
+ this adjustment comes from some records associated with compressed
+ code having the ISA bit cleared, most notably at function prologue
+ ends. The ISA bit is in this context retrieved from the minimal
+ symbol covering the address requested, which in turn has been
+ constructed from the binary's symbol table rather than DWARF-2
+ information. The correct setting of the ISA bit is required for
+ breakpoint addresses to correctly match against the stop PC.
+
+ As line entries can specify relative address adjustments we need to
+ keep track of the absolute value of the last line address recorded
+ in line information, so that we can calculate the actual address to
+ apply the ISA bit adjustment to. We use PC for this tracking and
+ keep the original address there.
+
+ As such relative address adjustments can be odd within compressed
+ code we need to keep track of the last line address with the ISA
+ bit adjustment applied too, as the original address may or may not
+ have had the ISA bit set. We use ADJ_PC for this tracking and keep
+ the adjusted address there.
+
+ For relative address adjustments we then use these variables to
+ calculate the address intended by line information, which will be
+ PC-relative, and return an updated adjustment carrying ISA bit
+ information, which will be ADJ_PC-relative. For absolute address
+ adjustments we just return the same address that we store in ADJ_PC
+ too.
+
+ As the first line entry can be relative to an implied address value
+ of 0 we need to have the initial address set up that we store in PC
+ and ADJ_PC. This is arranged with a call from `dwarf_decode_lines_1'
+ that sets PC to 0 and ADJ_PC accordingly, usually 0 as well. */
+
+static CORE_ADDR
+mips_adjust_dwarf2_line (CORE_ADDR addr, int rel)
+{
+ static CORE_ADDR adj_pc;
+ static CORE_ADDR pc;
+ CORE_ADDR isa_pc;
+
+ pc = rel ? pc + addr : addr;
+ isa_pc = mips_adjust_dwarf2_addr (pc);
+ addr = rel ? isa_pc - adj_pc : isa_pc;
+ adj_pc = isa_pc;
+ return addr;
+}
+
+/* Various MIPS16 thunk (aka stub or trampoline) names. */
+
+static const char mips_str_mips16_call_stub[] = "__mips16_call_stub_";
+static const char mips_str_mips16_ret_stub[] = "__mips16_ret_";
+static const char mips_str_call_fp_stub[] = "__call_stub_fp_";
+static const char mips_str_call_stub[] = "__call_stub_";
+static const char mips_str_fn_stub[] = "__fn_stub_";
+
+/* This is used as a PIC thunk prefix. */
+
+static const char mips_str_pic[] = ".pic.";
+
+/* Return non-zero if the PC is inside a call thunk (aka stub or
+ trampoline) that should be treated as a temporary frame. */
+
+static int
+mips_in_frame_stub (CORE_ADDR pc)
+{
+ CORE_ADDR start_addr;
+ const char *name;
+
+ /* Find the starting address of the function containing the PC. */
+ if (find_pc_partial_function (pc, &name, &start_addr, NULL) == 0)
return 0;
+
+ /* If the PC is in __mips16_call_stub_*, this is a call/return stub. */
+ if (strncmp (name, mips_str_mips16_call_stub,
+ strlen (mips_str_mips16_call_stub)) == 0)
+ return 1;
+ /* If the PC is in __call_stub_*, this is a call/return or a call stub. */
+ if (strncmp (name, mips_str_call_stub, strlen (mips_str_call_stub)) == 0)
+ return 1;
+ /* If the PC is in __fn_stub_*, this is a call stub. */
+ if (strncmp (name, mips_str_fn_stub, strlen (mips_str_fn_stub)) == 0)
+ return 1;
+
+ return 0; /* Not a stub. */
}
/* MIPS believes that the PC has a sign extended value. Perhaps the
static CORE_ADDR
mips_read_pc (struct regcache *regcache)
{
- ULONGEST pc;
- int regnum = mips_regnum (get_regcache_arch (regcache))->pc;
+ int regnum = gdbarch_pc_regnum (get_regcache_arch (regcache));
+ LONGEST pc;
+
regcache_cooked_read_signed (regcache, regnum, &pc);
- if (is_mips16_addr (pc))
- pc = unmake_mips16_addr (pc);
return pc;
}
static CORE_ADDR
mips_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)
{
- ULONGEST pc;
+ CORE_ADDR pc;
- pc = frame_unwind_register_signed
- (next_frame, gdbarch_num_regs (gdbarch) + mips_regnum (gdbarch)->pc);
- if (is_mips16_addr (pc))
- pc = unmake_mips16_addr (pc);
+ pc = frame_unwind_register_signed (next_frame, gdbarch_pc_regnum (gdbarch));
+ /* macro/2012-04-20: This hack skips over MIPS16 call thunks as
+ intermediate frames. In this case we can get the caller's address
+ from $ra, or if $ra contains an address within a thunk as well, then
+ it must be in the return path of __mips16_call_stub_{s,d}{f,c}_{0..10}
+ and thus the caller's address is in $s2. */
+ if (frame_relative_level (next_frame) >= 0 && mips_in_frame_stub (pc))
+ {
+ pc = frame_unwind_register_signed
+ (next_frame, gdbarch_num_regs (gdbarch) + MIPS_RA_REGNUM);
+ if (mips_in_frame_stub (pc))
+ pc = frame_unwind_register_signed
+ (next_frame, gdbarch_num_regs (gdbarch) + MIPS_S2_REGNUM);
+ }
return pc;
}
get_frame_pc (this_frame));
}
-static void
+/* Implement the "write_pc" gdbarch method. */
+
+void
mips_write_pc (struct regcache *regcache, CORE_ADDR pc)
{
- int regnum = mips_regnum (get_regcache_arch (regcache))->pc;
- if (mips_pc_is_mips16 (pc))
- regcache_cooked_write_unsigned (regcache, regnum, make_mips16_addr (pc));
- else
- regcache_cooked_write_unsigned (regcache, regnum, pc);
+ int regnum = gdbarch_pc_regnum (get_regcache_arch (regcache));
+
+ regcache_cooked_write_unsigned (regcache, regnum, pc);
}
-/* Fetch and return instruction from the specified location. If the PC
- is odd, assume it's a MIPS16 instruction; otherwise MIPS32. */
+/* Fetch and return instruction from the specified location. Handle
+ MIPS16/microMIPS as appropriate. */
static ULONGEST
-mips_fetch_instruction (struct gdbarch *gdbarch, CORE_ADDR addr)
+mips_fetch_instruction (struct gdbarch *gdbarch,
+ enum mips_isa isa, CORE_ADDR addr, int *statusp)
{
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
gdb_byte buf[MIPS_INSN32_SIZE];
int instlen;
int status;
- if (mips_pc_is_mips16 (addr))
+ switch (isa)
{
+ case ISA_MICROMIPS:
+ case ISA_MIPS16:
instlen = MIPS_INSN16_SIZE;
- addr = unmake_mips16_addr (addr);
+ addr = unmake_compact_addr (addr);
+ break;
+ case ISA_MIPS:
+ instlen = MIPS_INSN32_SIZE;
+ break;
+ default:
+ internal_error (__FILE__, __LINE__, _("invalid ISA"));
+ break;
}
- else
- instlen = MIPS_INSN32_SIZE;
status = target_read_memory (addr, buf, instlen);
+ if (statusp != NULL)
+ *statusp = status;
if (status)
- memory_error (status, addr);
+ {
+ if (statusp == NULL)
+ memory_error (status, addr);
+ return 0;
+ }
return extract_unsigned_integer (buf, instlen, byte_order);
}
#define rtype_shamt(x) ((x >> 6) & 0x1f)
#define rtype_funct(x) (x & 0x3f)
+/* MicroMIPS instruction fields. */
+#define micromips_op(x) ((x) >> 10)
+
+/* 16-bit/32-bit-high-part instruction formats, B and S refer to the lowest
+ bit and the size respectively of the field extracted. */
+#define b0s4_imm(x) ((x) & 0xf)
+#define b0s5_imm(x) ((x) & 0x1f)
+#define b0s5_reg(x) ((x) & 0x1f)
+#define b0s7_imm(x) ((x) & 0x7f)
+#define b0s10_imm(x) ((x) & 0x3ff)
+#define b1s4_imm(x) (((x) >> 1) & 0xf)
+#define b1s9_imm(x) (((x) >> 1) & 0x1ff)
+#define b2s3_cc(x) (((x) >> 2) & 0x7)
+#define b4s2_regl(x) (((x) >> 4) & 0x3)
+#define b5s5_op(x) (((x) >> 5) & 0x1f)
+#define b5s5_reg(x) (((x) >> 5) & 0x1f)
+#define b6s4_op(x) (((x) >> 6) & 0xf)
+#define b7s3_reg(x) (((x) >> 7) & 0x7)
+
+/* 32-bit instruction formats, B and S refer to the lowest bit and the size
+ respectively of the field extracted. */
+#define b0s6_op(x) ((x) & 0x3f)
+#define b0s11_op(x) ((x) & 0x7ff)
+#define b0s12_imm(x) ((x) & 0xfff)
+#define b0s16_imm(x) ((x) & 0xffff)
+#define b0s26_imm(x) ((x) & 0x3ffffff)
+#define b6s10_ext(x) (((x) >> 6) & 0x3ff)
+#define b11s5_reg(x) (((x) >> 11) & 0x1f)
+#define b12s4_op(x) (((x) >> 12) & 0xf)
+
+/* Return the size in bytes of the instruction INSN encoded in the ISA
+ instruction set. */
+
+static int
+mips_insn_size (enum mips_isa isa, ULONGEST insn)
+{
+ switch (isa)
+ {
+ case ISA_MICROMIPS:
+ if (micromips_op (insn) == 0x1f)
+ return 3 * MIPS_INSN16_SIZE;
+ else if (((micromips_op (insn) & 0x4) == 0x4)
+ || ((micromips_op (insn) & 0x7) == 0x0))
+ return 2 * MIPS_INSN16_SIZE;
+ else
+ return MIPS_INSN16_SIZE;
+ case ISA_MIPS16:
+ if ((insn & 0xf800) == 0xf000)
+ return 2 * MIPS_INSN16_SIZE;
+ else
+ return MIPS_INSN16_SIZE;
+ case ISA_MIPS:
+ return MIPS_INSN32_SIZE;
+ }
+ internal_error (__FILE__, __LINE__, _("invalid ISA"));
+}
+
static LONGEST
mips32_relative_offset (ULONGEST inst)
{
return ((itype_immediate (inst) ^ 0x8000) - 0x8000) << 2;
}
+/* Determine the address of the next instruction executed after the INST
+ floating condition branch instruction at PC. COUNT specifies the
+ number of the floating condition bits tested by the branch. */
+
+static CORE_ADDR
+mips32_bc1_pc (struct gdbarch *gdbarch, struct frame_info *frame,
+ ULONGEST inst, CORE_ADDR pc, int count)
+{
+ int fcsr = mips_regnum (gdbarch)->fp_control_status;
+ int cnum = (itype_rt (inst) >> 2) & (count - 1);
+ int tf = itype_rt (inst) & 1;
+ int mask = (1 << count) - 1;
+ ULONGEST fcs;
+ int cond;
+
+ if (fcsr == -1)
+ /* No way to handle; it'll most likely trap anyway. */
+ return pc;
+
+ fcs = get_frame_register_unsigned (frame, fcsr);
+ cond = ((fcs >> 24) & 0xfe) | ((fcs >> 23) & 0x01);
+
+ if (((cond >> cnum) & mask) != mask * !tf)
+ pc += mips32_relative_offset (inst);
+ else
+ pc += 4;
+
+ return pc;
+}
+
+/* Return nonzero if the gdbarch is an Octeon series. */
+
+static int
+is_octeon (struct gdbarch *gdbarch)
+{
+ const struct bfd_arch_info *info = gdbarch_bfd_arch_info (gdbarch);
+
+ return (info->mach == bfd_mach_mips_octeon
+ || info->mach == bfd_mach_mips_octeonp
+ || info->mach == bfd_mach_mips_octeon2);
+}
+
+/* Return true if the OP represents the Octeon's BBIT instruction. */
+
+static int
+is_octeon_bbit_op (int op, struct gdbarch *gdbarch)
+{
+ if (!is_octeon (gdbarch))
+ return 0;
+ /* BBIT0 is encoded as LWC2: 110 010. */
+ /* BBIT032 is encoded as LDC2: 110 110. */
+ /* BBIT1 is encoded as SWC2: 111 010. */
+ /* BBIT132 is encoded as SDC2: 111 110. */
+ if (op == 50 || op == 54 || op == 58 || op == 62)
+ return 1;
+ return 0;
+}
+
+
/* Determine where to set a single step breakpoint while considering
branch prediction. */
+
static CORE_ADDR
mips32_next_pc (struct frame_info *frame, CORE_ADDR pc)
{
struct gdbarch *gdbarch = get_frame_arch (frame);
unsigned long inst;
int op;
- inst = mips_fetch_instruction (gdbarch, pc);
+ inst = mips_fetch_instruction (gdbarch, ISA_MIPS, pc, NULL);
+ op = itype_op (inst);
if ((inst & 0xe0000000) != 0) /* Not a special, jump or branch
instruction. */
{
- if (itype_op (inst) >> 2 == 5)
+ if (op >> 2 == 5)
/* BEQL, BNEL, BLEZL, BGTZL: bits 0101xx */
{
- op = (itype_op (inst) & 0x03);
- switch (op)
+ switch (op & 0x03)
{
case 0: /* BEQL */
goto equal_branch;
pc += 4;
}
}
- else if (itype_op (inst) == 17 && itype_rs (inst) == 8)
+ else if (op == 17 && itype_rs (inst) == 8)
/* BC1F, BC1FL, BC1T, BC1TL: 010001 01000 */
+ pc = mips32_bc1_pc (gdbarch, frame, inst, pc + 4, 1);
+ else if (op == 17 && itype_rs (inst) == 9
+ && (itype_rt (inst) & 2) == 0)
+ /* BC1ANY2F, BC1ANY2T: 010001 01001 xxx0x */
+ pc = mips32_bc1_pc (gdbarch, frame, inst, pc + 4, 2);
+ else if (op == 17 && itype_rs (inst) == 10
+ && (itype_rt (inst) & 2) == 0)
+ /* BC1ANY4F, BC1ANY4T: 010001 01010 xxx0x */
+ pc = mips32_bc1_pc (gdbarch, frame, inst, pc + 4, 4);
+ else if (op == 29)
+ /* JALX: 011101 */
+ /* The new PC will be alternate mode. */
{
- int tf = itype_rt (inst) & 0x01;
- int cnum = itype_rt (inst) >> 2;
- int fcrcs =
- get_frame_register_signed (frame,
- mips_regnum (get_frame_arch (frame))->
- fp_control_status);
- int cond = ((fcrcs >> 24) & 0x0e) | ((fcrcs >> 23) & 0x01);
-
- if (((cond >> cnum) & 0x01) == tf)
- pc += mips32_relative_offset (inst) + 4;
- else
- pc += 8;
+ unsigned long reg;
+
+ reg = jtype_target (inst) << 2;
+ /* Add 1 to indicate 16-bit mode -- invert ISA mode. */
+ pc = ((pc + 4) & ~(CORE_ADDR) 0x0fffffff) + reg + 1;
+ }
+ else if (is_octeon_bbit_op (op, gdbarch))
+ {
+ int bit, branch_if;
+
+ branch_if = op == 58 || op == 62;
+ bit = itype_rt (inst);
+
+ /* Take into account the *32 instructions. */
+ if (op == 54 || op == 62)
+ bit += 32;
+
+ if (((get_frame_register_signed (frame,
+ itype_rs (inst)) >> bit) & 1)
+ == branch_if)
+ pc += mips32_relative_offset (inst) + 4;
+ else
+ pc += 8; /* After the delay slot. */
}
+
else
pc += 4; /* Not a branch, next instruction is easy. */
}
{ /* This gets way messy. */
/* Further subdivide into SPECIAL, REGIMM and other. */
- switch (op = itype_op (inst) & 0x07) /* Extract bits 28,27,26. */
+ switch (op & 0x07) /* Extract bits 28,27,26. */
{
case 0: /* SPECIAL */
op = rtype_funct (inst);
else
pc += 8; /* after the delay slot */
break;
+ case 0x1c: /* BPOSGE32 */
+ case 0x1e: /* BPOSGE64 */
+ pc += 4;
+ if (itype_rs (inst) == 0)
+ {
+ unsigned int pos = (op & 2) ? 64 : 32;
+ int dspctl = mips_regnum (gdbarch)->dspctl;
+
+ if (dspctl == -1)
+ /* No way to handle; it'll most likely trap anyway. */
+ break;
+
+ if ((get_frame_register_unsigned (frame,
+ dspctl) & 0x7f) >= pos)
+ pc += mips32_relative_offset (inst);
+ else
+ pc += 4;
+ }
+ break;
/* All of the other instructions in the REGIMM category */
default:
pc += 4;
pc = reg + ((pc + 4) & ~(CORE_ADDR) 0x0fffffff);
}
break;
- /* FIXME case JALX : */
- {
- unsigned long reg;
- reg = jtype_target (inst) << 2;
- pc = reg + ((pc + 4) & ~(CORE_ADDR) 0x0fffffff) + 1; /* yes, +1 */
- /* Add 1 to indicate 16 bit mode - Invert ISA mode */
- }
- break; /* The new PC will be alternate mode */
case 4: /* BEQ, BEQL */
equal_branch:
if (get_frame_register_signed (frame, itype_rs (inst)) ==
return pc;
} /* mips32_next_pc */
+/* Extract the 7-bit signed immediate offset from the microMIPS instruction
+ INSN. */
+
+static LONGEST
+micromips_relative_offset7 (ULONGEST insn)
+{
+ return ((b0s7_imm (insn) ^ 0x40) - 0x40) << 1;
+}
+
+/* Extract the 10-bit signed immediate offset from the microMIPS instruction
+ INSN. */
+
+static LONGEST
+micromips_relative_offset10 (ULONGEST insn)
+{
+ return ((b0s10_imm (insn) ^ 0x200) - 0x200) << 1;
+}
+
+/* Extract the 16-bit signed immediate offset from the microMIPS instruction
+ INSN. */
+
+static LONGEST
+micromips_relative_offset16 (ULONGEST insn)
+{
+ return ((b0s16_imm (insn) ^ 0x8000) - 0x8000) << 1;
+}
+
+/* Return the size in bytes of the microMIPS instruction at the address PC. */
+
+static int
+micromips_pc_insn_size (struct gdbarch *gdbarch, CORE_ADDR pc)
+{
+ ULONGEST insn;
+
+ insn = mips_fetch_instruction (gdbarch, ISA_MICROMIPS, pc, NULL);
+ return mips_insn_size (ISA_MICROMIPS, insn);
+}
+
+/* Calculate the address of the next microMIPS instruction to execute
+ after the INSN coprocessor 1 conditional branch instruction at the
+ address PC. COUNT denotes the number of coprocessor condition bits
+ examined by the branch. */
+
+static CORE_ADDR
+micromips_bc1_pc (struct gdbarch *gdbarch, struct frame_info *frame,
+ ULONGEST insn, CORE_ADDR pc, int count)
+{
+ int fcsr = mips_regnum (gdbarch)->fp_control_status;
+ int cnum = b2s3_cc (insn >> 16) & (count - 1);
+ int tf = b5s5_op (insn >> 16) & 1;
+ int mask = (1 << count) - 1;
+ ULONGEST fcs;
+ int cond;
+
+ if (fcsr == -1)
+ /* No way to handle; it'll most likely trap anyway. */
+ return pc;
+
+ fcs = get_frame_register_unsigned (frame, fcsr);
+ cond = ((fcs >> 24) & 0xfe) | ((fcs >> 23) & 0x01);
+
+ if (((cond >> cnum) & mask) != mask * !tf)
+ pc += micromips_relative_offset16 (insn);
+ else
+ pc += micromips_pc_insn_size (gdbarch, pc);
+
+ return pc;
+}
+
+/* Calculate the address of the next microMIPS instruction to execute
+ after the instruction at the address PC. */
+
+static CORE_ADDR
+micromips_next_pc (struct frame_info *frame, CORE_ADDR pc)
+{
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+ ULONGEST insn;
+
+ insn = mips_fetch_instruction (gdbarch, ISA_MICROMIPS, pc, NULL);
+ pc += MIPS_INSN16_SIZE;
+ switch (mips_insn_size (ISA_MICROMIPS, insn))
+ {
+ /* 48-bit instructions. */
+ case 3 * MIPS_INSN16_SIZE: /* POOL48A: bits 011111 */
+ /* No branch or jump instructions in this category. */
+ pc += 2 * MIPS_INSN16_SIZE;
+ break;
+
+ /* 32-bit instructions. */
+ case 2 * MIPS_INSN16_SIZE:
+ insn <<= 16;
+ insn |= mips_fetch_instruction (gdbarch, ISA_MICROMIPS, pc, NULL);
+ pc += MIPS_INSN16_SIZE;
+ switch (micromips_op (insn >> 16))
+ {
+ case 0x00: /* POOL32A: bits 000000 */
+ if (b0s6_op (insn) == 0x3c
+ /* POOL32Axf: bits 000000 ... 111100 */
+ && (b6s10_ext (insn) & 0x2bf) == 0x3c)
+ /* JALR, JALR.HB: 000000 000x111100 111100 */
+ /* JALRS, JALRS.HB: 000000 010x111100 111100 */
+ pc = get_frame_register_signed (frame, b0s5_reg (insn >> 16));
+ break;
+
+ case 0x10: /* POOL32I: bits 010000 */
+ switch (b5s5_op (insn >> 16))
+ {
+ case 0x00: /* BLTZ: bits 010000 00000 */
+ case 0x01: /* BLTZAL: bits 010000 00001 */
+ case 0x11: /* BLTZALS: bits 010000 10001 */
+ if (get_frame_register_signed (frame,
+ b0s5_reg (insn >> 16)) < 0)
+ pc += micromips_relative_offset16 (insn);
+ else
+ pc += micromips_pc_insn_size (gdbarch, pc);
+ break;
+
+ case 0x02: /* BGEZ: bits 010000 00010 */
+ case 0x03: /* BGEZAL: bits 010000 00011 */
+ case 0x13: /* BGEZALS: bits 010000 10011 */
+ if (get_frame_register_signed (frame,
+ b0s5_reg (insn >> 16)) >= 0)
+ pc += micromips_relative_offset16 (insn);
+ else
+ pc += micromips_pc_insn_size (gdbarch, pc);
+ break;
+
+ case 0x04: /* BLEZ: bits 010000 00100 */
+ if (get_frame_register_signed (frame,
+ b0s5_reg (insn >> 16)) <= 0)
+ pc += micromips_relative_offset16 (insn);
+ else
+ pc += micromips_pc_insn_size (gdbarch, pc);
+ break;
+
+ case 0x05: /* BNEZC: bits 010000 00101 */
+ if (get_frame_register_signed (frame,
+ b0s5_reg (insn >> 16)) != 0)
+ pc += micromips_relative_offset16 (insn);
+ break;
+
+ case 0x06: /* BGTZ: bits 010000 00110 */
+ if (get_frame_register_signed (frame,
+ b0s5_reg (insn >> 16)) > 0)
+ pc += micromips_relative_offset16 (insn);
+ else
+ pc += micromips_pc_insn_size (gdbarch, pc);
+ break;
+
+ case 0x07: /* BEQZC: bits 010000 00111 */
+ if (get_frame_register_signed (frame,
+ b0s5_reg (insn >> 16)) == 0)
+ pc += micromips_relative_offset16 (insn);
+ break;
+
+ case 0x14: /* BC2F: bits 010000 10100 xxx00 */
+ case 0x15: /* BC2T: bits 010000 10101 xxx00 */
+ if (((insn >> 16) & 0x3) == 0x0)
+ /* BC2F, BC2T: don't know how to handle these. */
+ break;
+ break;
+
+ case 0x1a: /* BPOSGE64: bits 010000 11010 */
+ case 0x1b: /* BPOSGE32: bits 010000 11011 */
+ {
+ unsigned int pos = (b5s5_op (insn >> 16) & 1) ? 32 : 64;
+ int dspctl = mips_regnum (gdbarch)->dspctl;
+
+ if (dspctl == -1)
+ /* No way to handle; it'll most likely trap anyway. */
+ break;
+
+ if ((get_frame_register_unsigned (frame,
+ dspctl) & 0x7f) >= pos)
+ pc += micromips_relative_offset16 (insn);
+ else
+ pc += micromips_pc_insn_size (gdbarch, pc);
+ }
+ break;
+
+ case 0x1c: /* BC1F: bits 010000 11100 xxx00 */
+ /* BC1ANY2F: bits 010000 11100 xxx01 */
+ case 0x1d: /* BC1T: bits 010000 11101 xxx00 */
+ /* BC1ANY2T: bits 010000 11101 xxx01 */
+ if (((insn >> 16) & 0x2) == 0x0)
+ pc = micromips_bc1_pc (gdbarch, frame, insn, pc,
+ ((insn >> 16) & 0x1) + 1);
+ break;
+
+ case 0x1e: /* BC1ANY4F: bits 010000 11110 xxx01 */
+ case 0x1f: /* BC1ANY4T: bits 010000 11111 xxx01 */
+ if (((insn >> 16) & 0x3) == 0x1)
+ pc = micromips_bc1_pc (gdbarch, frame, insn, pc, 4);
+ break;
+ }
+ break;
+
+ case 0x1d: /* JALS: bits 011101 */
+ case 0x35: /* J: bits 110101 */
+ case 0x3d: /* JAL: bits 111101 */
+ pc = ((pc | 0x7fffffe) ^ 0x7fffffe) | (b0s26_imm (insn) << 1);
+ break;
+
+ case 0x25: /* BEQ: bits 100101 */
+ if (get_frame_register_signed (frame, b0s5_reg (insn >> 16))
+ == get_frame_register_signed (frame, b5s5_reg (insn >> 16)))
+ pc += micromips_relative_offset16 (insn);
+ else
+ pc += micromips_pc_insn_size (gdbarch, pc);
+ break;
+
+ case 0x2d: /* BNE: bits 101101 */
+ if (get_frame_register_signed (frame, b0s5_reg (insn >> 16))
+ != get_frame_register_signed (frame, b5s5_reg (insn >> 16)))
+ pc += micromips_relative_offset16 (insn);
+ else
+ pc += micromips_pc_insn_size (gdbarch, pc);
+ break;
+
+ case 0x3c: /* JALX: bits 111100 */
+ pc = ((pc | 0xfffffff) ^ 0xfffffff) | (b0s26_imm (insn) << 2);
+ break;
+ }
+ break;
+
+ /* 16-bit instructions. */
+ case MIPS_INSN16_SIZE:
+ switch (micromips_op (insn))
+ {
+ case 0x11: /* POOL16C: bits 010001 */
+ if ((b5s5_op (insn) & 0x1c) == 0xc)
+ /* JR16, JRC, JALR16, JALRS16: 010001 011xx */
+ pc = get_frame_register_signed (frame, b0s5_reg (insn));
+ else if (b5s5_op (insn) == 0x18)
+ /* JRADDIUSP: bits 010001 11000 */
+ pc = get_frame_register_signed (frame, MIPS_RA_REGNUM);
+ break;
+
+ case 0x23: /* BEQZ16: bits 100011 */
+ {
+ int rs = mips_reg3_to_reg[b7s3_reg (insn)];
+
+ if (get_frame_register_signed (frame, rs) == 0)
+ pc += micromips_relative_offset7 (insn);
+ else
+ pc += micromips_pc_insn_size (gdbarch, pc);
+ }
+ break;
+
+ case 0x2b: /* BNEZ16: bits 101011 */
+ {
+ int rs = mips_reg3_to_reg[b7s3_reg (insn)];
+
+ if (get_frame_register_signed (frame, rs) != 0)
+ pc += micromips_relative_offset7 (insn);
+ else
+ pc += micromips_pc_insn_size (gdbarch, pc);
+ }
+ break;
+
+ case 0x33: /* B16: bits 110011 */
+ pc += micromips_relative_offset10 (insn);
+ break;
+ }
+ break;
+ }
+
+ return pc;
+}
+
/* Decoding the next place to set a breakpoint is irregular for the
mips 16 variant, but fortunately, there fewer instructions. We have
to cope ith extensions for 16 bit instructions and a pair of actual
extended_offset (unsigned int extension)
{
CORE_ADDR value;
- value = (extension >> 21) & 0x3f; /* * extract 15:11 */
+
+ value = (extension >> 16) & 0x1f; /* Extract 15:11. */
value = value << 6;
- value |= (extension >> 16) & 0x1f; /* extract 10:5 */
+ value |= (extension >> 21) & 0x3f; /* Extract 10:5. */
value = value << 5;
- value |= extension & 0x01f; /* extract 4:0 */
+ value |= extension & 0x1f; /* Extract 4:0. */
+
return value;
}
{
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
gdb_byte buf[8];
- pc &= 0xfffffffe; /* Clear the low order bit. */
+
+ pc = unmake_compact_addr (pc); /* Clear the low order bit. */
target_read_memory (pc, buf, 2);
return extract_unsigned_integer (buf, 2, byte_order);
}
CORE_ADDR value;
if (extension)
{
- value = extended_offset (extension);
- value = value << 11; /* rom for the original value */
- value |= inst & 0x7ff; /* eleven bits from instruction */
+ value = extended_offset ((extension << 16) | inst);
+ value = (value ^ 0x8000) - 0x8000; /* Sign-extend. */
}
else
{
value = inst & 0x7ff;
- /* FIXME : Consider sign extension. */
+ value = (value ^ 0x400) - 0x400; /* Sign-extend. */
}
offset = value;
regx = -1;
CORE_ADDR value;
if (extension)
{
- value = extended_offset (extension);
- value = value << 8; /* from the original instruction */
- value |= inst & 0xff; /* eleven bits from instruction */
- regx = (extension >> 8) & 0x07; /* or i8 funct */
- if (value & 0x4000) /* Test the sign bit, bit 26. */
- {
- value &= ~0x3fff; /* Remove the sign bit. */
- value = -value;
- }
+ value = extended_offset ((extension << 16) | inst);
+ value = (value ^ 0x8000) - 0x8000; /* Sign-extend. */
}
else
{
- value = inst & 0xff; /* 8 bits */
- regx = (inst >> 8) & 0x07; /* or i8 funct */
- /* FIXME: Do sign extension, this format needs it. */
- if (value & 0x80) /* THIS CONFUSES ME. */
- {
- value &= 0xef; /* Remove the sign bit. */
- value = -value;
- }
+ value = inst & 0xff; /* 8 bits */
+ value = (value ^ 0x80) - 0x80; /* Sign-extend. */
}
offset = value;
+ regx = (inst >> 8) & 0x07; /* i8 funct */
regy = -1;
break;
}
unsigned int nexthalf;
value = ((inst & 0x1f) << 5) | ((inst >> 5) & 0x1f);
value = value << 16;
- nexthalf = mips_fetch_instruction (gdbarch, pc + 2); /* low bit
- still set. */
+ nexthalf = mips_fetch_instruction (gdbarch, ISA_MIPS16, pc + 2, NULL);
+ /* Low bit still set. */
value |= nexthalf;
offset = value;
regx = -1;
}
+/* Calculate the destination of a branch whose 16-bit opcode word is at PC,
+ and having a signed 16-bit OFFSET. */
+
static CORE_ADDR
add_offset_16 (CORE_ADDR pc, int offset)
{
- return ((offset << 2) | ((pc + 2) & (~(CORE_ADDR) 0x0fffffff)));
+ return pc + (offset << 1) + 2;
}
static CORE_ADDR
{
case 2: /* Branch */
{
- CORE_ADDR offset;
struct upk_mips16 upk;
unpack_mips16 (gdbarch, pc, extension, insn, itype, &upk);
- offset = upk.offset;
- if (offset & 0x800)
- {
- offset &= 0xeff;
- offset = -offset;
- }
- pc += (offset << 1) + 2;
+ pc = add_offset_16 (pc, upk.offset);
break;
}
case 3: /* JAL , JALX - Watch out, these are 32 bit
{
struct upk_mips16 upk;
unpack_mips16 (gdbarch, pc, extension, insn, jalxtype, &upk);
- pc = add_offset_16 (pc, upk.offset);
+ pc = ((pc + 2) & (~(CORE_ADDR) 0x0fffffff)) | (upk.offset << 2);
if ((insn >> 10) & 0x01) /* Exchange mode */
pc = pc & ~0x01; /* Clear low bit, indicate 32 bit mode. */
else
struct upk_mips16 upk;
int reg;
unpack_mips16 (gdbarch, pc, extension, insn, ritype, &upk);
- reg = get_frame_register_signed (frame, upk.regx);
+ reg = get_frame_register_signed (frame, mips_reg3_to_reg[upk.regx]);
if (reg == 0)
- pc += (upk.offset << 1) + 2;
+ pc = add_offset_16 (pc, upk.offset);
else
pc += 2;
break;
struct upk_mips16 upk;
int reg;
unpack_mips16 (gdbarch, pc, extension, insn, ritype, &upk);
- reg = get_frame_register_signed (frame, upk.regx);
+ reg = get_frame_register_signed (frame, mips_reg3_to_reg[upk.regx]);
if (reg != 0)
- pc += (upk.offset << 1) + 2;
+ pc = add_offset_16 (pc, upk.offset);
else
pc += 2;
break;
reg = get_frame_register_signed (frame, 24); /* Test register is 24 */
if (((upk.regx == 0) && (reg == 0)) /* BTEZ */
|| ((upk.regx == 1) && (reg != 0))) /* BTNEZ */
- /* pc = add_offset_16(pc,upk.offset) ; */
- pc += (upk.offset << 1) + 2;
+ pc = add_offset_16 (pc, upk.offset);
else
pc += 2;
break;
int reg;
upk.regx = (insn >> 8) & 0x07;
upk.regy = (insn >> 5) & 0x07;
- switch (upk.regy)
- {
- case 0:
- reg = upk.regx;
- break;
- case 1:
- reg = 31;
- break; /* Function return instruction. */
- case 2:
- reg = upk.regx;
- break;
- default:
- reg = 31;
- break; /* BOGUS Guess */
- }
+ if ((upk.regy & 1) == 0)
+ reg = mips_reg3_to_reg[upk.regx];
+ else
+ reg = 31; /* Function return instruction. */
pc = get_frame_register_signed (frame, reg);
}
else
/* The mips_next_pc function supports single_step when the remote
target monitor or stub is not developed enough to do a single_step.
It works by decoding the current instruction and predicting where a
- branch will go. This isnt hard because all the data is available.
- The MIPS32 and MIPS16 variants are quite different. */
+ branch will go. This isn't hard because all the data is available.
+ The MIPS32, MIPS16 and microMIPS variants are quite different. */
static CORE_ADDR
mips_next_pc (struct frame_info *frame, CORE_ADDR pc)
{
- if (is_mips16_addr (pc))
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+
+ if (mips_pc_is_mips16 (gdbarch, pc))
return mips16_next_pc (frame, pc);
+ else if (mips_pc_is_micromips (gdbarch, pc))
+ return micromips_next_pc (frame, pc);
else
return mips32_next_pc (frame, pc);
}
+/* Return non-zero if the MIPS16 instruction INSN is a compact branch
+ or jump. */
+
+static int
+mips16_instruction_is_compact_branch (unsigned short insn)
+{
+ switch (insn & 0xf800)
+ {
+ case 0xe800:
+ return (insn & 0x009f) == 0x80; /* JALRC/JRC */
+ case 0x6000:
+ return (insn & 0x0600) == 0; /* BTNEZ/BTEQZ */
+ case 0x2800: /* BNEZ */
+ case 0x2000: /* BEQZ */
+ case 0x1000: /* B */
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+/* Return non-zero if the microMIPS instruction INSN is a compact branch
+ or jump. */
+
+static int
+micromips_instruction_is_compact_branch (unsigned short insn)
+{
+ switch (micromips_op (insn))
+ {
+ case 0x11: /* POOL16C: bits 010001 */
+ return (b5s5_op (insn) == 0x18
+ /* JRADDIUSP: bits 010001 11000 */
+ || b5s5_op (insn) == 0xd);
+ /* JRC: bits 010011 01101 */
+ case 0x10: /* POOL32I: bits 010000 */
+ return (b5s5_op (insn) & 0x1d) == 0x5;
+ /* BEQZC/BNEZC: bits 010000 001x1 */
+ default:
+ return 0;
+ }
+}
+
struct mips_frame_cache
{
CORE_ADDR base;
struct frame_info *this_frame,
struct mips_frame_cache *this_cache)
{
+ int prev_non_prologue_insn = 0;
+ int this_non_prologue_insn;
+ int non_prologue_insns = 0;
+ CORE_ADDR prev_pc;
CORE_ADDR cur_pc;
CORE_ADDR frame_addr = 0; /* Value of $r17, used as frame pointer. */
CORE_ADDR sp;
unsigned inst = 0; /* current instruction */
unsigned entry_inst = 0; /* the entry instruction */
unsigned save_inst = 0; /* the save instruction */
+ int prev_delay_slot = 0;
+ int in_delay_slot;
int reg, offset;
int extend_bytes = 0;
- int prev_extend_bytes;
- CORE_ADDR end_prologue_addr = 0;
+ int prev_extend_bytes = 0;
+ CORE_ADDR end_prologue_addr;
/* Can be called when there's no process, and hence when there's no
THIS_FRAME. */
if (limit_pc > start_pc + 200)
limit_pc = start_pc + 200;
+ prev_pc = start_pc;
+ /* Permit at most one non-prologue non-control-transfer instruction
+ in the middle which may have been reordered by the compiler for
+ optimisation. */
for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS_INSN16_SIZE)
{
+ this_non_prologue_insn = 0;
+ in_delay_slot = 0;
+
/* Save the previous instruction. If it's an EXTEND, we'll extract
the immediate offset extension from it in mips16_get_imm. */
prev_inst = inst;
/* Fetch and decode the instruction. */
- inst = (unsigned short) mips_fetch_instruction (gdbarch, cur_pc);
+ inst = (unsigned short) mips_fetch_instruction (gdbarch, ISA_MIPS16,
+ cur_pc, NULL);
/* Normally we ignore extend instructions. However, if it is
not followed by a valid prologue instruction, then this
else if ((inst & 0xf800) == 0xd000) /* sw reg,n($sp) */
{
offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
- reg = mips16_to_32_reg[(inst & 0x700) >> 8];
+ reg = mips_reg3_to_reg[(inst & 0x700) >> 8];
set_reg_offset (gdbarch, this_cache, reg, sp + offset);
}
else if ((inst & 0xff00) == 0xf900) /* sd reg,n($sp) */
{
offset = mips16_get_imm (prev_inst, inst, 5, 8, 0);
- reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
+ reg = mips_reg3_to_reg[(inst & 0xe0) >> 5];
set_reg_offset (gdbarch, this_cache, reg, sp + offset);
}
else if ((inst & 0xff00) == 0x6200) /* sw $ra,n($sp) */
else if ((inst & 0xFF00) == 0xd900) /* sw reg,offset($s1) */
{
offset = mips16_get_imm (prev_inst, inst, 5, 4, 0);
- reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
+ reg = mips_reg3_to_reg[(inst & 0xe0) >> 5];
set_reg_offset (gdbarch, this_cache, reg, frame_addr + offset);
}
else if ((inst & 0xFF00) == 0x7900) /* sd reg,offset($s1) */
{
offset = mips16_get_imm (prev_inst, inst, 5, 8, 0);
- reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
+ reg = mips_reg3_to_reg[(inst & 0xe0) >> 5];
set_reg_offset (gdbarch, this_cache, reg, frame_addr + offset);
}
else if ((inst & 0xf81f) == 0xe809
if (prev_extend_bytes) /* extend */
save_inst |= prev_inst << 16;
}
- else if ((inst & 0xf800) == 0x1800) /* jal(x) */
- cur_pc += MIPS_INSN16_SIZE; /* 32-bit instruction */
else if ((inst & 0xff1c) == 0x6704) /* move reg,$a0-$a3 */
{
/* This instruction is part of the prologue, but we don't
need to do anything special to handle it. */
}
+ else if (mips16_instruction_has_delay_slot (inst, 0))
+ /* JAL/JALR/JALX/JR */
+ {
+ /* The instruction in the delay slot can be a part
+ of the prologue, so move forward once more. */
+ in_delay_slot = 1;
+ if (mips16_instruction_has_delay_slot (inst, 1))
+ /* JAL/JALX */
+ {
+ prev_extend_bytes = MIPS_INSN16_SIZE;
+ cur_pc += MIPS_INSN16_SIZE; /* 32-bit instruction */
+ }
+ }
else
{
- /* This instruction is not an instruction typically found
- in a prologue, so we must have reached the end of the
- prologue. */
- if (end_prologue_addr == 0)
- end_prologue_addr = cur_pc - prev_extend_bytes;
+ this_non_prologue_insn = 1;
}
+
+ non_prologue_insns += this_non_prologue_insn;
+
+ /* A jump or branch, or enough non-prologue insns seen? If so,
+ then we must have reached the end of the prologue by now. */
+ if (prev_delay_slot || non_prologue_insns > 1
+ || mips16_instruction_is_compact_branch (inst))
+ break;
+
+ prev_non_prologue_insn = this_non_prologue_insn;
+ prev_delay_slot = in_delay_slot;
+ prev_pc = cur_pc - prev_extend_bytes;
}
/* The entry instruction is typically the first instruction in a function,
= this_cache->saved_regs[gdbarch_num_regs (gdbarch) + MIPS_RA_REGNUM];
}
- /* If we didn't reach the end of the prologue when scanning the function
- instructions, then set end_prologue_addr to the address of the
- instruction immediately after the last one we scanned. */
- if (end_prologue_addr == 0)
- end_prologue_addr = cur_pc;
+ /* Set end_prologue_addr to the address of the instruction immediately
+ after the last one we scanned. Unless the last one looked like a
+ non-prologue instruction (and we looked ahead), in which case use
+ its address instead. */
+ end_prologue_addr = (prev_non_prologue_insn || prev_delay_slot
+ ? prev_pc : cur_pc - prev_extend_bytes);
return end_prologue_addr;
}
mips_insn16_frame_sniffer (const struct frame_unwind *self,
struct frame_info *this_frame, void **this_cache)
{
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
CORE_ADDR pc = get_frame_pc (this_frame);
- if (mips_pc_is_mips16 (pc))
+ if (mips_pc_is_mips16 (gdbarch, pc))
return 1;
return 0;
}
static const struct frame_unwind mips_insn16_frame_unwind =
{
NORMAL_FRAME,
+ default_frame_unwind_stop_reason,
mips_insn16_frame_this_id,
mips_insn16_frame_prev_register,
NULL,
static const struct frame_base *
mips_insn16_frame_base_sniffer (struct frame_info *this_frame)
{
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
CORE_ADDR pc = get_frame_pc (this_frame);
- if (mips_pc_is_mips16 (pc))
+ if (mips_pc_is_mips16 (gdbarch, pc))
return &mips_insn16_frame_base;
else
return NULL;
}
-/* Mark all the registers as unset in the saved_regs array
- of THIS_CACHE. Do nothing if THIS_CACHE is null. */
+/* Decode a 9-bit signed immediate argument of ADDIUSP -- -2 is mapped
+ to -258, -1 -- to -257, 0 -- to 256, 1 -- to 257 and other values are
+ interpreted directly, and then multiplied by 4. */
-static void
-reset_saved_regs (struct gdbarch *gdbarch, struct mips_frame_cache *this_cache)
+static int
+micromips_decode_imm9 (int imm)
{
- if (this_cache == NULL || this_cache->saved_regs == NULL)
- return;
-
- {
- const int num_regs = gdbarch_num_regs (gdbarch);
- int i;
-
- for (i = 0; i < num_regs; i++)
- {
- this_cache->saved_regs[i].addr = -1;
- }
- }
+ imm = (imm ^ 0x100) - 0x100;
+ if (imm > -3 && imm < 2)
+ imm ^= 0x100;
+ return imm << 2;
}
-/* Analyze the function prologue from START_PC to LIMIT_PC. Builds
- the associated FRAME_CACHE if not null.
- Return the address of the first instruction past the prologue. */
+/* Analyze the function prologue from START_PC to LIMIT_PC. Return
+ the address of the first instruction past the prologue. */
static CORE_ADDR
-mips32_scan_prologue (struct gdbarch *gdbarch,
- CORE_ADDR start_pc, CORE_ADDR limit_pc,
- struct frame_info *this_frame,
- struct mips_frame_cache *this_cache)
+micromips_scan_prologue (struct gdbarch *gdbarch,
+ CORE_ADDR start_pc, CORE_ADDR limit_pc,
+ struct frame_info *this_frame,
+ struct mips_frame_cache *this_cache)
{
+ CORE_ADDR end_prologue_addr;
+ int prev_non_prologue_insn = 0;
+ int frame_reg = MIPS_SP_REGNUM;
+ int this_non_prologue_insn;
+ int non_prologue_insns = 0;
+ long frame_offset = 0; /* Size of stack frame. */
+ long frame_adjust = 0; /* Offset of FP from SP. */
+ CORE_ADDR frame_addr = 0; /* Value of $30, used as frame pointer. */
+ int prev_delay_slot = 0;
+ int in_delay_slot;
+ CORE_ADDR prev_pc;
CORE_ADDR cur_pc;
- CORE_ADDR frame_addr = 0; /* Value of $r30. Used by gcc for
- frame-pointer. */
+ ULONGEST insn; /* current instruction */
CORE_ADDR sp;
- long frame_offset;
- int frame_reg = MIPS_SP_REGNUM;
-
- CORE_ADDR end_prologue_addr = 0;
- int seen_sp_adjust = 0;
- int load_immediate_bytes = 0;
- int in_delay_slot = 0;
- int regsize_is_64_bits = (mips_abi_regsize (gdbarch) == 8);
+ long offset;
+ long sp_adj;
+ long v1_off = 0; /* The assumption is LUI will replace it. */
+ int reglist;
+ int breg;
+ int dreg;
+ int sreg;
+ int treg;
+ int loc;
+ int op;
+ int s;
+ int i;
/* Can be called when there's no process, and hence when there's no
THIS_FRAME. */
if (limit_pc > start_pc + 200)
limit_pc = start_pc + 200;
+ prev_pc = start_pc;
-restart:
-
- frame_offset = 0;
- for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS_INSN32_SIZE)
+ /* Permit at most one non-prologue non-control-transfer instruction
+ in the middle which may have been reordered by the compiler for
+ optimisation. */
+ for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += loc)
{
- unsigned long inst, high_word, low_word;
- int reg;
-
- /* Fetch the instruction. */
- inst = (unsigned long) mips_fetch_instruction (gdbarch, cur_pc);
-
- /* Save some code by pre-extracting some useful fields. */
- high_word = (inst >> 16) & 0xffff;
- low_word = inst & 0xffff;
- reg = high_word & 0x1f;
-
- if (high_word == 0x27bd /* addiu $sp,$sp,-i */
- || high_word == 0x23bd /* addi $sp,$sp,-i */
- || high_word == 0x67bd) /* daddiu $sp,$sp,-i */
- {
- if (low_word & 0x8000) /* Negative stack adjustment? */
- frame_offset += 0x10000 - low_word;
- else
- /* Exit loop if a positive stack adjustment is found, which
- usually means that the stack cleanup code in the function
- epilogue is reached. */
- break;
- seen_sp_adjust = 1;
- }
- else if (((high_word & 0xFFE0) == 0xafa0) /* sw reg,offset($sp) */
- && !regsize_is_64_bits)
- {
- set_reg_offset (gdbarch, this_cache, reg, sp + low_word);
- }
- else if (((high_word & 0xFFE0) == 0xffa0) /* sd reg,offset($sp) */
- && regsize_is_64_bits)
- {
- /* Irix 6.2 N32 ABI uses sd instructions for saving $gp and $ra. */
- set_reg_offset (gdbarch, this_cache, reg, sp + low_word);
- }
- else if (high_word == 0x27be) /* addiu $30,$sp,size */
+ this_non_prologue_insn = 0;
+ in_delay_slot = 0;
+ sp_adj = 0;
+ loc = 0;
+ insn = mips_fetch_instruction (gdbarch, ISA_MICROMIPS, cur_pc, NULL);
+ loc += MIPS_INSN16_SIZE;
+ switch (mips_insn_size (ISA_MICROMIPS, insn))
{
- /* Old gcc frame, r30 is virtual frame pointer. */
- if ((long) low_word != frame_offset)
- frame_addr = sp + low_word;
- else if (this_frame && frame_reg == MIPS_SP_REGNUM)
- {
- unsigned alloca_adjust;
+ /* 48-bit instructions. */
+ case 3 * MIPS_INSN16_SIZE:
+ /* No prologue instructions in this category. */
+ this_non_prologue_insn = 1;
+ loc += 2 * MIPS_INSN16_SIZE;
+ break;
- frame_reg = 30;
- frame_addr = get_frame_register_signed
- (this_frame, gdbarch_num_regs (gdbarch) + 30);
+ /* 32-bit instructions. */
+ case 2 * MIPS_INSN16_SIZE:
+ insn <<= 16;
+ insn |= mips_fetch_instruction (gdbarch,
+ ISA_MICROMIPS, cur_pc + loc, NULL);
+ loc += MIPS_INSN16_SIZE;
+ switch (micromips_op (insn >> 16))
+ {
+ /* Record $sp/$fp adjustment. */
+ /* Discard (D)ADDU $gp,$jp used for PIC code. */
+ case 0x0: /* POOL32A: bits 000000 */
+ case 0x16: /* POOL32S: bits 010110 */
+ op = b0s11_op (insn);
+ sreg = b0s5_reg (insn >> 16);
+ treg = b5s5_reg (insn >> 16);
+ dreg = b11s5_reg (insn);
+ if (op == 0x1d0
+ /* SUBU: bits 000000 00111010000 */
+ /* DSUBU: bits 010110 00111010000 */
+ && dreg == MIPS_SP_REGNUM && sreg == MIPS_SP_REGNUM
+ && treg == 3)
+ /* (D)SUBU $sp, $v1 */
+ sp_adj = v1_off;
+ else if (op != 0x150
+ /* ADDU: bits 000000 00101010000 */
+ /* DADDU: bits 010110 00101010000 */
+ || dreg != 28 || sreg != 28 || treg != MIPS_T9_REGNUM)
+ this_non_prologue_insn = 1;
+ break;
- alloca_adjust = (unsigned) (frame_addr - (sp + low_word));
- if (alloca_adjust > 0)
+ case 0x8: /* POOL32B: bits 001000 */
+ op = b12s4_op (insn);
+ breg = b0s5_reg (insn >> 16);
+ reglist = sreg = b5s5_reg (insn >> 16);
+ offset = (b0s12_imm (insn) ^ 0x800) - 0x800;
+ if ((op == 0x9 || op == 0xc)
+ /* SWP: bits 001000 1001 */
+ /* SDP: bits 001000 1100 */
+ && breg == MIPS_SP_REGNUM && sreg < MIPS_RA_REGNUM)
+ /* S[DW]P reg,offset($sp) */
{
- /* FP > SP + frame_size. This may be because of
- an alloca or somethings similar. Fix sp to
- "pre-alloca" value, and try again. */
- sp += alloca_adjust;
- /* Need to reset the status of all registers. Otherwise,
- we will hit a guard that prevents the new address
- for each register to be recomputed during the second
- pass. */
- reset_saved_regs (gdbarch, this_cache);
- goto restart;
+ s = 4 << ((b12s4_op (insn) & 0x4) == 0x4);
+ set_reg_offset (gdbarch, this_cache,
+ sreg, sp + offset);
+ set_reg_offset (gdbarch, this_cache,
+ sreg + 1, sp + offset + s);
+ }
+ else if ((op == 0xd || op == 0xf)
+ /* SWM: bits 001000 1101 */
+ /* SDM: bits 001000 1111 */
+ && breg == MIPS_SP_REGNUM
+ /* SWM reglist,offset($sp) */
+ && ((reglist >= 1 && reglist <= 9)
+ || (reglist >= 16 && reglist <= 25)))
+ {
+ int sreglist = min(reglist & 0xf, 8);
+
+ s = 4 << ((b12s4_op (insn) & 0x2) == 0x2);
+ for (i = 0; i < sreglist; i++)
+ set_reg_offset (gdbarch, this_cache, 16 + i, sp + s * i);
+ if ((reglist & 0xf) > 8)
+ set_reg_offset (gdbarch, this_cache, 30, sp + s * i++);
+ if ((reglist & 0x10) == 0x10)
+ set_reg_offset (gdbarch, this_cache,
+ MIPS_RA_REGNUM, sp + s * i++);
+ }
+ else
+ this_non_prologue_insn = 1;
+ break;
+
+ /* Record $sp/$fp adjustment. */
+ /* Discard (D)ADDIU $gp used for PIC code. */
+ case 0xc: /* ADDIU: bits 001100 */
+ case 0x17: /* DADDIU: bits 010111 */
+ sreg = b0s5_reg (insn >> 16);
+ dreg = b5s5_reg (insn >> 16);
+ offset = (b0s16_imm (insn) ^ 0x8000) - 0x8000;
+ if (sreg == MIPS_SP_REGNUM && dreg == MIPS_SP_REGNUM)
+ /* (D)ADDIU $sp, imm */
+ sp_adj = offset;
+ else if (sreg == MIPS_SP_REGNUM && dreg == 30)
+ /* (D)ADDIU $fp, $sp, imm */
+ {
+ frame_addr = sp + offset;
+ frame_adjust = offset;
+ frame_reg = 30;
}
+ else if (sreg != 28 || dreg != 28)
+ /* (D)ADDIU $gp, imm */
+ this_non_prologue_insn = 1;
+ break;
+
+ /* LUI $v1 is used for larger $sp adjustments. */
+ /* Discard LUI $gp used for PIC code. */
+ case 0x10: /* POOL32I: bits 010000 */
+ if (b5s5_op (insn >> 16) == 0xd
+ /* LUI: bits 010000 001101 */
+ && b0s5_reg (insn >> 16) == 3)
+ /* LUI $v1, imm */
+ v1_off = ((b0s16_imm (insn) << 16) ^ 0x80000000) - 0x80000000;
+ else if (b5s5_op (insn >> 16) != 0xd
+ /* LUI: bits 010000 001101 */
+ || b0s5_reg (insn >> 16) != 28)
+ /* LUI $gp, imm */
+ this_non_prologue_insn = 1;
+ break;
+
+ /* ORI $v1 is used for larger $sp adjustments. */
+ case 0x14: /* ORI: bits 010100 */
+ sreg = b0s5_reg (insn >> 16);
+ dreg = b5s5_reg (insn >> 16);
+ if (sreg == 3 && dreg == 3)
+ /* ORI $v1, imm */
+ v1_off |= b0s16_imm (insn);
+ else
+ this_non_prologue_insn = 1;
+ break;
+
+ case 0x26: /* SWC1: bits 100110 */
+ case 0x2e: /* SDC1: bits 101110 */
+ breg = b0s5_reg (insn >> 16);
+ if (breg != MIPS_SP_REGNUM)
+ /* S[DW]C1 reg,offset($sp) */
+ this_non_prologue_insn = 1;
+ break;
+
+ case 0x36: /* SD: bits 110110 */
+ case 0x3e: /* SW: bits 111110 */
+ breg = b0s5_reg (insn >> 16);
+ sreg = b5s5_reg (insn >> 16);
+ offset = (b0s16_imm (insn) ^ 0x8000) - 0x8000;
+ if (breg == MIPS_SP_REGNUM)
+ /* S[DW] reg,offset($sp) */
+ set_reg_offset (gdbarch, this_cache, sreg, sp + offset);
+ else
+ this_non_prologue_insn = 1;
+ break;
+
+ default:
+ /* The instruction in the delay slot can be a part
+ of the prologue, so move forward once more. */
+ if (micromips_instruction_has_delay_slot (insn, 0))
+ in_delay_slot = 1;
+ else
+ this_non_prologue_insn = 1;
+ break;
}
- }
- /* move $30,$sp. With different versions of gas this will be either
- `addu $30,$sp,$zero' or `or $30,$sp,$zero' or `daddu 30,sp,$0'.
- Accept any one of these. */
- else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d)
- {
- /* New gcc frame, virtual frame pointer is at r30 + frame_size. */
- if (this_frame && frame_reg == MIPS_SP_REGNUM)
+ insn >>= 16;
+ break;
+
+ /* 16-bit instructions. */
+ case MIPS_INSN16_SIZE:
+ switch (micromips_op (insn))
{
- unsigned alloca_adjust;
+ case 0x3: /* MOVE: bits 000011 */
+ sreg = b0s5_reg (insn);
+ dreg = b5s5_reg (insn);
+ if (sreg == MIPS_SP_REGNUM && dreg == 30)
+ /* MOVE $fp, $sp */
+ {
+ frame_addr = sp;
+ frame_reg = 30;
+ }
+ else if ((sreg & 0x1c) != 0x4)
+ /* MOVE reg, $a0-$a3 */
+ this_non_prologue_insn = 1;
+ break;
- frame_reg = 30;
- frame_addr = get_frame_register_signed
- (this_frame, gdbarch_num_regs (gdbarch) + 30);
+ case 0x11: /* POOL16C: bits 010001 */
+ if (b6s4_op (insn) == 0x5)
+ /* SWM: bits 010001 0101 */
+ {
+ offset = ((b0s4_imm (insn) << 2) ^ 0x20) - 0x20;
+ reglist = b4s2_regl (insn);
+ for (i = 0; i <= reglist; i++)
+ set_reg_offset (gdbarch, this_cache, 16 + i, sp + 4 * i);
+ set_reg_offset (gdbarch, this_cache,
+ MIPS_RA_REGNUM, sp + 4 * i++);
+ }
+ else
+ this_non_prologue_insn = 1;
+ break;
- alloca_adjust = (unsigned) (frame_addr - sp);
- if (alloca_adjust > 0)
- {
- /* FP > SP + frame_size. This may be because of
- an alloca or somethings similar. Fix sp to
- "pre-alloca" value, and try again. */
- sp = frame_addr;
- /* Need to reset the status of all registers. Otherwise,
- we will hit a guard that prevents the new address
- for each register to be recomputed during the second
- pass. */
- reset_saved_regs (gdbarch, this_cache);
- goto restart;
- }
+ case 0x13: /* POOL16D: bits 010011 */
+ if ((insn & 0x1) == 0x1)
+ /* ADDIUSP: bits 010011 1 */
+ sp_adj = micromips_decode_imm9 (b1s9_imm (insn));
+ else if (b5s5_reg (insn) == MIPS_SP_REGNUM)
+ /* ADDIUS5: bits 010011 0 */
+ /* ADDIUS5 $sp, imm */
+ sp_adj = (b1s4_imm (insn) ^ 8) - 8;
+ else
+ this_non_prologue_insn = 1;
+ break;
+
+ case 0x32: /* SWSP: bits 110010 */
+ offset = b0s5_imm (insn) << 2;
+ sreg = b5s5_reg (insn);
+ set_reg_offset (gdbarch, this_cache, sreg, sp + offset);
+ break;
+
+ default:
+ /* The instruction in the delay slot can be a part
+ of the prologue, so move forward once more. */
+ if (micromips_instruction_has_delay_slot (insn << 16, 0))
+ in_delay_slot = 1;
+ else
+ this_non_prologue_insn = 1;
+ break;
}
+ break;
}
- else if ((high_word & 0xFFE0) == 0xafc0 /* sw reg,offset($30) */
- && !regsize_is_64_bits)
- {
- set_reg_offset (gdbarch, this_cache, reg, frame_addr + low_word);
- }
- else if ((high_word & 0xFFE0) == 0xE7A0 /* swc1 freg,n($sp) */
- || (high_word & 0xF3E0) == 0xA3C0 /* sx reg,n($s8) */
- || (inst & 0xFF9F07FF) == 0x00800021 /* move reg,$a0-$a3 */
- || high_word == 0x3c1c /* lui $gp,n */
- || high_word == 0x279c /* addiu $gp,$gp,n */
- || inst == 0x0399e021 /* addu $gp,$gp,$t9 */
- || inst == 0x033ce021 /* addu $gp,$t9,$gp */
- )
- {
- /* These instructions are part of the prologue, but we don't
- need to do anything special to handle them. */
- }
- /* The instructions below load $at or $t0 with an immediate
- value in preparation for a stack adjustment via
- subu $sp,$sp,[$at,$t0]. These instructions could also
- initialize a local variable, so we accept them only before
- a stack adjustment instruction was seen. */
- else if (!seen_sp_adjust
- && (high_word == 0x3c01 /* lui $at,n */
- || high_word == 0x3c08 /* lui $t0,n */
- || high_word == 0x3421 /* ori $at,$at,n */
- || high_word == 0x3508 /* ori $t0,$t0,n */
- || high_word == 0x3401 /* ori $at,$zero,n */
- || high_word == 0x3408 /* ori $t0,$zero,n */
- ))
- {
- load_immediate_bytes += MIPS_INSN32_SIZE; /* FIXME! */
- }
- else
- {
- /* This instruction is not an instruction typically found
- in a prologue, so we must have reached the end of the
- prologue. */
- /* FIXME: brobecker/2004-10-10: Can't we just break out of this
- loop now? Why would we need to continue scanning the function
- instructions? */
- if (end_prologue_addr == 0)
- end_prologue_addr = cur_pc;
-
- /* Check for branches and jumps. For now, only jump to
- register are caught (i.e. returns). */
- if ((itype_op (inst) & 0x07) == 0 && rtype_funct (inst) == 8)
- in_delay_slot = 1;
- }
-
- /* If the previous instruction was a jump, we must have reached
- the end of the prologue by now. Stop scanning so that we do
- not go past the function return. */
- if (in_delay_slot)
+ if (sp_adj < 0)
+ frame_offset -= sp_adj;
+
+ non_prologue_insns += this_non_prologue_insn;
+
+ /* A jump or branch, enough non-prologue insns seen or positive
+ stack adjustment? If so, then we must have reached the end
+ of the prologue by now. */
+ if (prev_delay_slot || non_prologue_insns > 1 || sp_adj > 0
+ || micromips_instruction_is_compact_branch (insn))
break;
+
+ prev_non_prologue_insn = this_non_prologue_insn;
+ prev_delay_slot = in_delay_slot;
+ prev_pc = cur_pc;
}
if (this_cache != NULL)
{
- this_cache->base =
- (get_frame_register_signed (this_frame,
+ this_cache->base =
+ (get_frame_register_signed (this_frame,
gdbarch_num_regs (gdbarch) + frame_reg)
- + frame_offset);
- /* FIXME: brobecker/2004-09-15: We should be able to get rid of
- this assignment below, eventually. But it's still needed
- for now. */
+ + frame_offset - frame_adjust);
+ /* FIXME: brobecker/2004-10-10: Just as in the mips32 case, we should
+ be able to get rid of the assignment below, evetually. But it's
+ still needed for now. */
this_cache->saved_regs[gdbarch_num_regs (gdbarch)
+ mips_regnum (gdbarch)->pc]
- = this_cache->saved_regs[gdbarch_num_regs (gdbarch)
- + MIPS_RA_REGNUM];
+ = this_cache->saved_regs[gdbarch_num_regs (gdbarch) + MIPS_RA_REGNUM];
}
- /* If we didn't reach the end of the prologue when scanning the function
- instructions, then set end_prologue_addr to the address of the
- instruction immediately after the last one we scanned. */
- /* brobecker/2004-10-10: I don't think this would ever happen, but
- we may as well be careful and do our best if we have a null
- end_prologue_addr. */
- if (end_prologue_addr == 0)
- end_prologue_addr = cur_pc;
-
- /* In a frameless function, we might have incorrectly
- skipped some load immediate instructions. Undo the skipping
- if the load immediate was not followed by a stack adjustment. */
- if (load_immediate_bytes && !seen_sp_adjust)
- end_prologue_addr -= load_immediate_bytes;
+ /* Set end_prologue_addr to the address of the instruction immediately
+ after the last one we scanned. Unless the last one looked like a
+ non-prologue instruction (and we looked ahead), in which case use
+ its address instead. */
+ end_prologue_addr
+ = prev_non_prologue_insn || prev_delay_slot ? prev_pc : cur_pc;
return end_prologue_addr;
}
-/* Heuristic unwinder for procedures using 32-bit instructions (covers
- both 32-bit and 64-bit MIPS ISAs). Procedures using 16-bit
- instructions (a.k.a. MIPS16) are handled by the mips_insn16
- unwinder. */
+/* Heuristic unwinder for procedures using microMIPS instructions.
+ Procedures that use the 32-bit instruction set are handled by the
+ mips_insn32 unwinder. Likewise MIPS16 and the mips_insn16 unwinder. */
static struct mips_frame_cache *
-mips_insn32_frame_cache (struct frame_info *this_frame, void **this_cache)
+mips_micro_frame_cache (struct frame_info *this_frame, void **this_cache)
{
struct gdbarch *gdbarch = get_frame_arch (this_frame);
struct mips_frame_cache *cache;
find_pc_partial_function (pc, NULL, &start_addr, NULL);
if (start_addr == 0)
- start_addr = heuristic_proc_start (gdbarch, pc);
+ start_addr = heuristic_proc_start (get_frame_arch (this_frame), pc);
/* We can't analyze the prologue if we couldn't find the begining
of the function. */
if (start_addr == 0)
return cache;
- mips32_scan_prologue (gdbarch, start_addr, pc, this_frame, *this_cache);
+ micromips_scan_prologue (gdbarch, start_addr, pc, this_frame, *this_cache);
}
-
+
/* gdbarch_sp_regnum contains the value and not the address. */
trad_frame_set_value (cache->saved_regs,
gdbarch_num_regs (gdbarch) + MIPS_SP_REGNUM,
}
static void
-mips_insn32_frame_this_id (struct frame_info *this_frame, void **this_cache,
- struct frame_id *this_id)
+mips_micro_frame_this_id (struct frame_info *this_frame, void **this_cache,
+ struct frame_id *this_id)
{
- struct mips_frame_cache *info = mips_insn32_frame_cache (this_frame,
- this_cache);
+ struct mips_frame_cache *info = mips_micro_frame_cache (this_frame,
+ this_cache);
/* This marks the outermost frame. */
if (info->base == 0)
return;
}
static struct value *
-mips_insn32_frame_prev_register (struct frame_info *this_frame,
- void **this_cache, int regnum)
+mips_micro_frame_prev_register (struct frame_info *this_frame,
+ void **this_cache, int regnum)
{
- struct mips_frame_cache *info = mips_insn32_frame_cache (this_frame,
- this_cache);
+ struct mips_frame_cache *info = mips_micro_frame_cache (this_frame,
+ this_cache);
return trad_frame_get_prev_register (this_frame, info->saved_regs, regnum);
}
static int
-mips_insn32_frame_sniffer (const struct frame_unwind *self,
- struct frame_info *this_frame, void **this_cache)
+mips_micro_frame_sniffer (const struct frame_unwind *self,
+ struct frame_info *this_frame, void **this_cache)
{
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
CORE_ADDR pc = get_frame_pc (this_frame);
- if (! mips_pc_is_mips16 (pc))
+
+ if (mips_pc_is_micromips (gdbarch, pc))
return 1;
return 0;
}
-static const struct frame_unwind mips_insn32_frame_unwind =
+static const struct frame_unwind mips_micro_frame_unwind =
{
NORMAL_FRAME,
- mips_insn32_frame_this_id,
- mips_insn32_frame_prev_register,
+ default_frame_unwind_stop_reason,
+ mips_micro_frame_this_id,
+ mips_micro_frame_prev_register,
NULL,
- mips_insn32_frame_sniffer
+ mips_micro_frame_sniffer
};
static CORE_ADDR
-mips_insn32_frame_base_address (struct frame_info *this_frame,
- void **this_cache)
+mips_micro_frame_base_address (struct frame_info *this_frame,
+ void **this_cache)
{
- struct mips_frame_cache *info = mips_insn32_frame_cache (this_frame,
- this_cache);
+ struct mips_frame_cache *info = mips_micro_frame_cache (this_frame,
+ this_cache);
return info->base;
}
-static const struct frame_base mips_insn32_frame_base =
+static const struct frame_base mips_micro_frame_base =
{
- &mips_insn32_frame_unwind,
- mips_insn32_frame_base_address,
- mips_insn32_frame_base_address,
- mips_insn32_frame_base_address
+ &mips_micro_frame_unwind,
+ mips_micro_frame_base_address,
+ mips_micro_frame_base_address,
+ mips_micro_frame_base_address
};
static const struct frame_base *
-mips_insn32_frame_base_sniffer (struct frame_info *this_frame)
+mips_micro_frame_base_sniffer (struct frame_info *this_frame)
{
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
CORE_ADDR pc = get_frame_pc (this_frame);
- if (! mips_pc_is_mips16 (pc))
- return &mips_insn32_frame_base;
+
+ if (mips_pc_is_micromips (gdbarch, pc))
+ return &mips_micro_frame_base;
else
return NULL;
}
-static struct trad_frame_cache *
-mips_stub_frame_cache (struct frame_info *this_frame, void **this_cache)
-{
- CORE_ADDR pc;
- CORE_ADDR start_addr;
- CORE_ADDR stack_addr;
- struct trad_frame_cache *this_trad_cache;
- struct gdbarch *gdbarch = get_frame_arch (this_frame);
- int num_regs = gdbarch_num_regs (gdbarch);
-
- if ((*this_cache) != NULL)
- return (*this_cache);
- this_trad_cache = trad_frame_cache_zalloc (this_frame);
- (*this_cache) = this_trad_cache;
-
- /* The return address is in the link register. */
- trad_frame_set_reg_realreg (this_trad_cache,
- gdbarch_pc_regnum (gdbarch),
- num_regs + MIPS_RA_REGNUM);
-
- /* Frame ID, since it's a frameless / stackless function, no stack
- space is allocated and SP on entry is the current SP. */
- pc = get_frame_pc (this_frame);
- find_pc_partial_function (pc, NULL, &start_addr, NULL);
- stack_addr = get_frame_register_signed (this_frame,
- num_regs + MIPS_SP_REGNUM);
- trad_frame_set_id (this_trad_cache, frame_id_build (stack_addr, start_addr));
-
- /* Assume that the frame's base is the same as the
- stack-pointer. */
- trad_frame_set_this_base (this_trad_cache, stack_addr);
-
- return this_trad_cache;
-}
+/* Mark all the registers as unset in the saved_regs array
+ of THIS_CACHE. Do nothing if THIS_CACHE is null. */
static void
-mips_stub_frame_this_id (struct frame_info *this_frame, void **this_cache,
- struct frame_id *this_id)
+reset_saved_regs (struct gdbarch *gdbarch, struct mips_frame_cache *this_cache)
{
- struct trad_frame_cache *this_trad_cache
- = mips_stub_frame_cache (this_frame, this_cache);
- trad_frame_get_id (this_trad_cache, this_id);
-}
+ if (this_cache == NULL || this_cache->saved_regs == NULL)
+ return;
-static struct value *
-mips_stub_frame_prev_register (struct frame_info *this_frame,
- void **this_cache, int regnum)
-{
- struct trad_frame_cache *this_trad_cache
- = mips_stub_frame_cache (this_frame, this_cache);
- return trad_frame_get_register (this_trad_cache, this_frame, regnum);
+ {
+ const int num_regs = gdbarch_num_regs (gdbarch);
+ int i;
+
+ for (i = 0; i < num_regs; i++)
+ {
+ this_cache->saved_regs[i].addr = -1;
+ }
+ }
}
-static int
-mips_stub_frame_sniffer (const struct frame_unwind *self,
- struct frame_info *this_frame, void **this_cache)
-{
- gdb_byte dummy[4];
- struct obj_section *s;
- CORE_ADDR pc = get_frame_address_in_block (this_frame);
- struct minimal_symbol *msym;
+/* Analyze the function prologue from START_PC to LIMIT_PC. Builds
+ the associated FRAME_CACHE if not null.
+ Return the address of the first instruction past the prologue. */
- /* Use the stub unwinder for unreadable code. */
- if (target_read_memory (get_frame_pc (this_frame), dummy, 4) != 0)
- return 1;
+static CORE_ADDR
+mips32_scan_prologue (struct gdbarch *gdbarch,
+ CORE_ADDR start_pc, CORE_ADDR limit_pc,
+ struct frame_info *this_frame,
+ struct mips_frame_cache *this_cache)
+{
+ int prev_non_prologue_insn;
+ int this_non_prologue_insn;
+ int non_prologue_insns;
+ CORE_ADDR frame_addr = 0; /* Value of $r30. Used by gcc for
+ frame-pointer. */
+ int prev_delay_slot;
+ CORE_ADDR prev_pc;
+ CORE_ADDR cur_pc;
+ CORE_ADDR sp;
+ long frame_offset;
+ int frame_reg = MIPS_SP_REGNUM;
- if (in_plt_section (pc, NULL))
- return 1;
+ CORE_ADDR end_prologue_addr;
+ int seen_sp_adjust = 0;
+ int load_immediate_bytes = 0;
+ int in_delay_slot;
+ int regsize_is_64_bits = (mips_abi_regsize (gdbarch) == 8);
- /* Binutils for MIPS puts lazy resolution stubs into .MIPS.stubs. */
- s = find_pc_section (pc);
+ /* Can be called when there's no process, and hence when there's no
+ THIS_FRAME. */
+ if (this_frame != NULL)
+ sp = get_frame_register_signed (this_frame,
+ gdbarch_num_regs (gdbarch)
+ + MIPS_SP_REGNUM);
+ else
+ sp = 0;
- if (s != NULL
- && strcmp (bfd_get_section_name (s->objfile->obfd, s->the_bfd_section),
- ".MIPS.stubs") == 0)
- return 1;
+ if (limit_pc > start_pc + 200)
+ limit_pc = start_pc + 200;
+
+restart:
+ prev_non_prologue_insn = 0;
+ non_prologue_insns = 0;
+ prev_delay_slot = 0;
+ prev_pc = start_pc;
+
+ /* Permit at most one non-prologue non-control-transfer instruction
+ in the middle which may have been reordered by the compiler for
+ optimisation. */
+ frame_offset = 0;
+ for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS_INSN32_SIZE)
+ {
+ unsigned long inst, high_word, low_word;
+ int reg;
+
+ this_non_prologue_insn = 0;
+ in_delay_slot = 0;
+
+ /* Fetch the instruction. */
+ inst = (unsigned long) mips_fetch_instruction (gdbarch, ISA_MIPS,
+ cur_pc, NULL);
+
+ /* Save some code by pre-extracting some useful fields. */
+ high_word = (inst >> 16) & 0xffff;
+ low_word = inst & 0xffff;
+ reg = high_word & 0x1f;
+
+ if (high_word == 0x27bd /* addiu $sp,$sp,-i */
+ || high_word == 0x23bd /* addi $sp,$sp,-i */
+ || high_word == 0x67bd) /* daddiu $sp,$sp,-i */
+ {
+ if (low_word & 0x8000) /* Negative stack adjustment? */
+ frame_offset += 0x10000 - low_word;
+ else
+ /* Exit loop if a positive stack adjustment is found, which
+ usually means that the stack cleanup code in the function
+ epilogue is reached. */
+ break;
+ seen_sp_adjust = 1;
+ }
+ else if (((high_word & 0xFFE0) == 0xafa0) /* sw reg,offset($sp) */
+ && !regsize_is_64_bits)
+ {
+ set_reg_offset (gdbarch, this_cache, reg, sp + low_word);
+ }
+ else if (((high_word & 0xFFE0) == 0xffa0) /* sd reg,offset($sp) */
+ && regsize_is_64_bits)
+ {
+ /* Irix 6.2 N32 ABI uses sd instructions for saving $gp and $ra. */
+ set_reg_offset (gdbarch, this_cache, reg, sp + low_word);
+ }
+ else if (high_word == 0x27be) /* addiu $30,$sp,size */
+ {
+ /* Old gcc frame, r30 is virtual frame pointer. */
+ if ((long) low_word != frame_offset)
+ frame_addr = sp + low_word;
+ else if (this_frame && frame_reg == MIPS_SP_REGNUM)
+ {
+ unsigned alloca_adjust;
+
+ frame_reg = 30;
+ frame_addr = get_frame_register_signed
+ (this_frame, gdbarch_num_regs (gdbarch) + 30);
+ frame_offset = 0;
+
+ alloca_adjust = (unsigned) (frame_addr - (sp + low_word));
+ if (alloca_adjust > 0)
+ {
+ /* FP > SP + frame_size. This may be because of
+ an alloca or somethings similar. Fix sp to
+ "pre-alloca" value, and try again. */
+ sp += alloca_adjust;
+ /* Need to reset the status of all registers. Otherwise,
+ we will hit a guard that prevents the new address
+ for each register to be recomputed during the second
+ pass. */
+ reset_saved_regs (gdbarch, this_cache);
+ goto restart;
+ }
+ }
+ }
+ /* move $30,$sp. With different versions of gas this will be either
+ `addu $30,$sp,$zero' or `or $30,$sp,$zero' or `daddu 30,sp,$0'.
+ Accept any one of these. */
+ else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d)
+ {
+ /* New gcc frame, virtual frame pointer is at r30 + frame_size. */
+ if (this_frame && frame_reg == MIPS_SP_REGNUM)
+ {
+ unsigned alloca_adjust;
+
+ frame_reg = 30;
+ frame_addr = get_frame_register_signed
+ (this_frame, gdbarch_num_regs (gdbarch) + 30);
+
+ alloca_adjust = (unsigned) (frame_addr - sp);
+ if (alloca_adjust > 0)
+ {
+ /* FP > SP + frame_size. This may be because of
+ an alloca or somethings similar. Fix sp to
+ "pre-alloca" value, and try again. */
+ sp = frame_addr;
+ /* Need to reset the status of all registers. Otherwise,
+ we will hit a guard that prevents the new address
+ for each register to be recomputed during the second
+ pass. */
+ reset_saved_regs (gdbarch, this_cache);
+ goto restart;
+ }
+ }
+ }
+ else if ((high_word & 0xFFE0) == 0xafc0 /* sw reg,offset($30) */
+ && !regsize_is_64_bits)
+ {
+ set_reg_offset (gdbarch, this_cache, reg, frame_addr + low_word);
+ }
+ else if ((high_word & 0xFFE0) == 0xE7A0 /* swc1 freg,n($sp) */
+ || (high_word & 0xF3E0) == 0xA3C0 /* sx reg,n($s8) */
+ || (inst & 0xFF9F07FF) == 0x00800021 /* move reg,$a0-$a3 */
+ || high_word == 0x3c1c /* lui $gp,n */
+ || high_word == 0x279c /* addiu $gp,$gp,n */
+ || inst == 0x0399e021 /* addu $gp,$gp,$t9 */
+ || inst == 0x033ce021 /* addu $gp,$t9,$gp */
+ )
+ {
+ /* These instructions are part of the prologue, but we don't
+ need to do anything special to handle them. */
+ }
+ /* The instructions below load $at or $t0 with an immediate
+ value in preparation for a stack adjustment via
+ subu $sp,$sp,[$at,$t0]. These instructions could also
+ initialize a local variable, so we accept them only before
+ a stack adjustment instruction was seen. */
+ else if (!seen_sp_adjust
+ && !prev_delay_slot
+ && (high_word == 0x3c01 /* lui $at,n */
+ || high_word == 0x3c08 /* lui $t0,n */
+ || high_word == 0x3421 /* ori $at,$at,n */
+ || high_word == 0x3508 /* ori $t0,$t0,n */
+ || high_word == 0x3401 /* ori $at,$zero,n */
+ || high_word == 0x3408 /* ori $t0,$zero,n */
+ ))
+ {
+ load_immediate_bytes += MIPS_INSN32_SIZE; /* FIXME! */
+ }
+ /* Check for branches and jumps. The instruction in the delay
+ slot can be a part of the prologue, so move forward once more. */
+ else if (mips32_instruction_has_delay_slot (gdbarch, inst))
+ {
+ in_delay_slot = 1;
+ }
+ /* This instruction is not an instruction typically found
+ in a prologue, so we must have reached the end of the
+ prologue. */
+ else
+ {
+ this_non_prologue_insn = 1;
+ }
+
+ non_prologue_insns += this_non_prologue_insn;
+
+ /* A jump or branch, or enough non-prologue insns seen? If so,
+ then we must have reached the end of the prologue by now. */
+ if (prev_delay_slot || non_prologue_insns > 1)
+ break;
+
+ prev_non_prologue_insn = this_non_prologue_insn;
+ prev_delay_slot = in_delay_slot;
+ prev_pc = cur_pc;
+ }
+
+ if (this_cache != NULL)
+ {
+ this_cache->base =
+ (get_frame_register_signed (this_frame,
+ gdbarch_num_regs (gdbarch) + frame_reg)
+ + frame_offset);
+ /* FIXME: brobecker/2004-09-15: We should be able to get rid of
+ this assignment below, eventually. But it's still needed
+ for now. */
+ this_cache->saved_regs[gdbarch_num_regs (gdbarch)
+ + mips_regnum (gdbarch)->pc]
+ = this_cache->saved_regs[gdbarch_num_regs (gdbarch)
+ + MIPS_RA_REGNUM];
+ }
+
+ /* Set end_prologue_addr to the address of the instruction immediately
+ after the last one we scanned. Unless the last one looked like a
+ non-prologue instruction (and we looked ahead), in which case use
+ its address instead. */
+ end_prologue_addr
+ = prev_non_prologue_insn || prev_delay_slot ? prev_pc : cur_pc;
+
+ /* In a frameless function, we might have incorrectly
+ skipped some load immediate instructions. Undo the skipping
+ if the load immediate was not followed by a stack adjustment. */
+ if (load_immediate_bytes && !seen_sp_adjust)
+ end_prologue_addr -= load_immediate_bytes;
+
+ return end_prologue_addr;
+}
+
+/* Heuristic unwinder for procedures using 32-bit instructions (covers
+ both 32-bit and 64-bit MIPS ISAs). Procedures using 16-bit
+ instructions (a.k.a. MIPS16) are handled by the mips_insn16
+ unwinder. Likewise microMIPS and the mips_micro unwinder. */
+
+static struct mips_frame_cache *
+mips_insn32_frame_cache (struct frame_info *this_frame, void **this_cache)
+{
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
+ struct mips_frame_cache *cache;
+
+ if ((*this_cache) != NULL)
+ return (*this_cache);
+
+ cache = FRAME_OBSTACK_ZALLOC (struct mips_frame_cache);
+ (*this_cache) = cache;
+ cache->saved_regs = trad_frame_alloc_saved_regs (this_frame);
+
+ /* Analyze the function prologue. */
+ {
+ const CORE_ADDR pc = get_frame_address_in_block (this_frame);
+ CORE_ADDR start_addr;
+
+ find_pc_partial_function (pc, NULL, &start_addr, NULL);
+ if (start_addr == 0)
+ start_addr = heuristic_proc_start (gdbarch, pc);
+ /* We can't analyze the prologue if we couldn't find the begining
+ of the function. */
+ if (start_addr == 0)
+ return cache;
+
+ mips32_scan_prologue (gdbarch, start_addr, pc, this_frame, *this_cache);
+ }
+
+ /* gdbarch_sp_regnum contains the value and not the address. */
+ trad_frame_set_value (cache->saved_regs,
+ gdbarch_num_regs (gdbarch) + MIPS_SP_REGNUM,
+ cache->base);
+
+ return (*this_cache);
+}
+
+static void
+mips_insn32_frame_this_id (struct frame_info *this_frame, void **this_cache,
+ struct frame_id *this_id)
+{
+ struct mips_frame_cache *info = mips_insn32_frame_cache (this_frame,
+ this_cache);
+ /* This marks the outermost frame. */
+ if (info->base == 0)
+ return;
+ (*this_id) = frame_id_build (info->base, get_frame_func (this_frame));
+}
+
+static struct value *
+mips_insn32_frame_prev_register (struct frame_info *this_frame,
+ void **this_cache, int regnum)
+{
+ struct mips_frame_cache *info = mips_insn32_frame_cache (this_frame,
+ this_cache);
+ return trad_frame_get_prev_register (this_frame, info->saved_regs, regnum);
+}
+
+static int
+mips_insn32_frame_sniffer (const struct frame_unwind *self,
+ struct frame_info *this_frame, void **this_cache)
+{
+ CORE_ADDR pc = get_frame_pc (this_frame);
+ if (mips_pc_is_mips (pc))
+ return 1;
+ return 0;
+}
+
+static const struct frame_unwind mips_insn32_frame_unwind =
+{
+ NORMAL_FRAME,
+ default_frame_unwind_stop_reason,
+ mips_insn32_frame_this_id,
+ mips_insn32_frame_prev_register,
+ NULL,
+ mips_insn32_frame_sniffer
+};
+
+static CORE_ADDR
+mips_insn32_frame_base_address (struct frame_info *this_frame,
+ void **this_cache)
+{
+ struct mips_frame_cache *info = mips_insn32_frame_cache (this_frame,
+ this_cache);
+ return info->base;
+}
+
+static const struct frame_base mips_insn32_frame_base =
+{
+ &mips_insn32_frame_unwind,
+ mips_insn32_frame_base_address,
+ mips_insn32_frame_base_address,
+ mips_insn32_frame_base_address
+};
+
+static const struct frame_base *
+mips_insn32_frame_base_sniffer (struct frame_info *this_frame)
+{
+ CORE_ADDR pc = get_frame_pc (this_frame);
+ if (mips_pc_is_mips (pc))
+ return &mips_insn32_frame_base;
+ else
+ return NULL;
+}
+
+static struct trad_frame_cache *
+mips_stub_frame_cache (struct frame_info *this_frame, void **this_cache)
+{
+ CORE_ADDR pc;
+ CORE_ADDR start_addr;
+ CORE_ADDR stack_addr;
+ struct trad_frame_cache *this_trad_cache;
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
+ int num_regs = gdbarch_num_regs (gdbarch);
+
+ if ((*this_cache) != NULL)
+ return (*this_cache);
+ this_trad_cache = trad_frame_cache_zalloc (this_frame);
+ (*this_cache) = this_trad_cache;
+
+ /* The return address is in the link register. */
+ trad_frame_set_reg_realreg (this_trad_cache,
+ gdbarch_pc_regnum (gdbarch),
+ num_regs + MIPS_RA_REGNUM);
+
+ /* Frame ID, since it's a frameless / stackless function, no stack
+ space is allocated and SP on entry is the current SP. */
+ pc = get_frame_pc (this_frame);
+ find_pc_partial_function (pc, NULL, &start_addr, NULL);
+ stack_addr = get_frame_register_signed (this_frame,
+ num_regs + MIPS_SP_REGNUM);
+ trad_frame_set_id (this_trad_cache, frame_id_build (stack_addr, start_addr));
+
+ /* Assume that the frame's base is the same as the
+ stack-pointer. */
+ trad_frame_set_this_base (this_trad_cache, stack_addr);
+
+ return this_trad_cache;
+}
+
+static void
+mips_stub_frame_this_id (struct frame_info *this_frame, void **this_cache,
+ struct frame_id *this_id)
+{
+ struct trad_frame_cache *this_trad_cache
+ = mips_stub_frame_cache (this_frame, this_cache);
+ trad_frame_get_id (this_trad_cache, this_id);
+}
+
+static struct value *
+mips_stub_frame_prev_register (struct frame_info *this_frame,
+ void **this_cache, int regnum)
+{
+ struct trad_frame_cache *this_trad_cache
+ = mips_stub_frame_cache (this_frame, this_cache);
+ return trad_frame_get_register (this_trad_cache, this_frame, regnum);
+}
+
+static int
+mips_stub_frame_sniffer (const struct frame_unwind *self,
+ struct frame_info *this_frame, void **this_cache)
+{
+ gdb_byte dummy[4];
+ struct obj_section *s;
+ CORE_ADDR pc = get_frame_address_in_block (this_frame);
+ struct bound_minimal_symbol msym;
+
+ /* Use the stub unwinder for unreadable code. */
+ if (target_read_memory (get_frame_pc (this_frame), dummy, 4) != 0)
+ return 1;
+
+ if (in_plt_section (pc) || in_mips_stubs_section (pc))
+ return 1;
/* Calling a PIC function from a non-PIC function passes through a
stub. The stub for foo is named ".pic.foo". */
msym = lookup_minimal_symbol_by_pc (pc);
- if (msym != NULL
- && SYMBOL_LINKAGE_NAME (msym) != NULL
- && strncmp (SYMBOL_LINKAGE_NAME (msym), ".pic.", 5) == 0)
+ if (msym.minsym != NULL
+ && MSYMBOL_LINKAGE_NAME (msym.minsym) != NULL
+ && strncmp (MSYMBOL_LINKAGE_NAME (msym.minsym), ".pic.", 5) == 0)
+ return 1;
+
+ return 0;
+}
+
+static const struct frame_unwind mips_stub_frame_unwind =
+{
+ NORMAL_FRAME,
+ default_frame_unwind_stop_reason,
+ mips_stub_frame_this_id,
+ mips_stub_frame_prev_register,
+ NULL,
+ mips_stub_frame_sniffer
+};
+
+static CORE_ADDR
+mips_stub_frame_base_address (struct frame_info *this_frame,
+ void **this_cache)
+{
+ struct trad_frame_cache *this_trad_cache
+ = mips_stub_frame_cache (this_frame, this_cache);
+ return trad_frame_get_this_base (this_trad_cache);
+}
+
+static const struct frame_base mips_stub_frame_base =
+{
+ &mips_stub_frame_unwind,
+ mips_stub_frame_base_address,
+ mips_stub_frame_base_address,
+ mips_stub_frame_base_address
+};
+
+static const struct frame_base *
+mips_stub_frame_base_sniffer (struct frame_info *this_frame)
+{
+ if (mips_stub_frame_sniffer (&mips_stub_frame_unwind, this_frame, NULL))
+ return &mips_stub_frame_base;
+ else
+ return NULL;
+}
+
+/* mips_addr_bits_remove - remove useless address bits */
+
+static CORE_ADDR
+mips_addr_bits_remove (struct gdbarch *gdbarch, CORE_ADDR addr)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
+ if (mips_mask_address_p (tdep) && (((ULONGEST) addr) >> 32 == 0xffffffffUL))
+ /* This hack is a work-around for existing boards using PMON, the
+ simulator, and any other 64-bit targets that doesn't have true
+ 64-bit addressing. On these targets, the upper 32 bits of
+ addresses are ignored by the hardware. Thus, the PC or SP are
+ likely to have been sign extended to all 1s by instruction
+ sequences that load 32-bit addresses. For example, a typical
+ piece of code that loads an address is this:
+
+ lui $r2, <upper 16 bits>
+ ori $r2, <lower 16 bits>
+
+ But the lui sign-extends the value such that the upper 32 bits
+ may be all 1s. The workaround is simply to mask off these
+ bits. In the future, gcc may be changed to support true 64-bit
+ addressing, and this masking will have to be disabled. */
+ return addr &= 0xffffffffUL;
+ else
+ return addr;
+}
+
+
+/* Checks for an atomic sequence of instructions beginning with a LL/LLD
+ instruction and ending with a SC/SCD instruction. If such a sequence
+ is found, attempt to step through it. A breakpoint is placed at the end of
+ the sequence. */
+
+/* Instructions used during single-stepping of atomic sequences, standard
+ ISA version. */
+#define LL_OPCODE 0x30
+#define LLD_OPCODE 0x34
+#define SC_OPCODE 0x38
+#define SCD_OPCODE 0x3c
+
+static int
+mips_deal_with_atomic_sequence (struct gdbarch *gdbarch,
+ struct address_space *aspace, CORE_ADDR pc)
+{
+ CORE_ADDR breaks[2] = {-1, -1};
+ CORE_ADDR loc = pc;
+ CORE_ADDR branch_bp; /* Breakpoint at branch instruction's destination. */
+ ULONGEST insn;
+ int insn_count;
+ int index;
+ int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
+ const int atomic_sequence_length = 16; /* Instruction sequence length. */
+
+ insn = mips_fetch_instruction (gdbarch, ISA_MIPS, loc, NULL);
+ /* Assume all atomic sequences start with a ll/lld instruction. */
+ if (itype_op (insn) != LL_OPCODE && itype_op (insn) != LLD_OPCODE)
+ return 0;
+
+ /* Assume that no atomic sequence is longer than "atomic_sequence_length"
+ instructions. */
+ for (insn_count = 0; insn_count < atomic_sequence_length; ++insn_count)
+ {
+ int is_branch = 0;
+ loc += MIPS_INSN32_SIZE;
+ insn = mips_fetch_instruction (gdbarch, ISA_MIPS, loc, NULL);
+
+ /* Assume that there is at most one branch in the atomic
+ sequence. If a branch is found, put a breakpoint in its
+ destination address. */
+ switch (itype_op (insn))
+ {
+ case 0: /* SPECIAL */
+ if (rtype_funct (insn) >> 1 == 4) /* JR, JALR */
+ return 0; /* fallback to the standard single-step code. */
+ break;
+ case 1: /* REGIMM */
+ is_branch = ((itype_rt (insn) & 0xc) == 0 /* B{LT,GE}Z* */
+ || ((itype_rt (insn) & 0x1e) == 0
+ && itype_rs (insn) == 0)); /* BPOSGE* */
+ break;
+ case 2: /* J */
+ case 3: /* JAL */
+ return 0; /* fallback to the standard single-step code. */
+ case 4: /* BEQ */
+ case 5: /* BNE */
+ case 6: /* BLEZ */
+ case 7: /* BGTZ */
+ case 20: /* BEQL */
+ case 21: /* BNEL */
+ case 22: /* BLEZL */
+ case 23: /* BGTTL */
+ is_branch = 1;
+ break;
+ case 17: /* COP1 */
+ is_branch = ((itype_rs (insn) == 9 || itype_rs (insn) == 10)
+ && (itype_rt (insn) & 0x2) == 0);
+ if (is_branch) /* BC1ANY2F, BC1ANY2T, BC1ANY4F, BC1ANY4T */
+ break;
+ /* Fall through. */
+ case 18: /* COP2 */
+ case 19: /* COP3 */
+ is_branch = (itype_rs (insn) == 8); /* BCzF, BCzFL, BCzT, BCzTL */
+ break;
+ }
+ if (is_branch)
+ {
+ branch_bp = loc + mips32_relative_offset (insn) + 4;
+ if (last_breakpoint >= 1)
+ return 0; /* More than one branch found, fallback to the
+ standard single-step code. */
+ breaks[1] = branch_bp;
+ last_breakpoint++;
+ }
+
+ if (itype_op (insn) == SC_OPCODE || itype_op (insn) == SCD_OPCODE)
+ break;
+ }
+
+ /* Assume that the atomic sequence ends with a sc/scd instruction. */
+ if (itype_op (insn) != SC_OPCODE && itype_op (insn) != SCD_OPCODE)
+ return 0;
+
+ loc += MIPS_INSN32_SIZE;
+
+ /* Insert a breakpoint right after the end of the atomic sequence. */
+ breaks[0] = loc;
+
+ /* Check for duplicated breakpoints. Check also for a breakpoint
+ placed (branch instruction's destination) in the atomic sequence. */
+ if (last_breakpoint && pc <= breaks[1] && breaks[1] <= breaks[0])
+ last_breakpoint = 0;
+
+ /* Effectively inserts the breakpoints. */
+ for (index = 0; index <= last_breakpoint; index++)
+ insert_single_step_breakpoint (gdbarch, aspace, breaks[index]);
+
+ return 1;
+}
+
+static int
+micromips_deal_with_atomic_sequence (struct gdbarch *gdbarch,
+ struct address_space *aspace,
+ CORE_ADDR pc)
+{
+ const int atomic_sequence_length = 16; /* Instruction sequence length. */
+ int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
+ CORE_ADDR breaks[2] = {-1, -1};
+ CORE_ADDR branch_bp = 0; /* Breakpoint at branch instruction's
+ destination. */
+ CORE_ADDR loc = pc;
+ int sc_found = 0;
+ ULONGEST insn;
+ int insn_count;
+ int index;
+
+ /* Assume all atomic sequences start with a ll/lld instruction. */
+ insn = mips_fetch_instruction (gdbarch, ISA_MICROMIPS, loc, NULL);
+ if (micromips_op (insn) != 0x18) /* POOL32C: bits 011000 */
+ return 0;
+ loc += MIPS_INSN16_SIZE;
+ insn <<= 16;
+ insn |= mips_fetch_instruction (gdbarch, ISA_MICROMIPS, loc, NULL);
+ if ((b12s4_op (insn) & 0xb) != 0x3) /* LL, LLD: bits 011000 0x11 */
+ return 0;
+ loc += MIPS_INSN16_SIZE;
+
+ /* Assume all atomic sequences end with an sc/scd instruction. Assume
+ that no atomic sequence is longer than "atomic_sequence_length"
+ instructions. */
+ for (insn_count = 0;
+ !sc_found && insn_count < atomic_sequence_length;
+ ++insn_count)
+ {
+ int is_branch = 0;
+
+ insn = mips_fetch_instruction (gdbarch, ISA_MICROMIPS, loc, NULL);
+ loc += MIPS_INSN16_SIZE;
+
+ /* Assume that there is at most one conditional branch in the
+ atomic sequence. If a branch is found, put a breakpoint in
+ its destination address. */
+ switch (mips_insn_size (ISA_MICROMIPS, insn))
+ {
+ /* 48-bit instructions. */
+ case 3 * MIPS_INSN16_SIZE: /* POOL48A: bits 011111 */
+ loc += 2 * MIPS_INSN16_SIZE;
+ break;
+
+ /* 32-bit instructions. */
+ case 2 * MIPS_INSN16_SIZE:
+ switch (micromips_op (insn))
+ {
+ case 0x10: /* POOL32I: bits 010000 */
+ if ((b5s5_op (insn) & 0x18) != 0x0
+ /* BLTZ, BLTZAL, BGEZ, BGEZAL: 010000 000xx */
+ /* BLEZ, BNEZC, BGTZ, BEQZC: 010000 001xx */
+ && (b5s5_op (insn) & 0x1d) != 0x11
+ /* BLTZALS, BGEZALS: bits 010000 100x1 */
+ && ((b5s5_op (insn) & 0x1e) != 0x14
+ || (insn & 0x3) != 0x0)
+ /* BC2F, BC2T: bits 010000 1010x xxx00 */
+ && (b5s5_op (insn) & 0x1e) != 0x1a
+ /* BPOSGE64, BPOSGE32: bits 010000 1101x */
+ && ((b5s5_op (insn) & 0x1e) != 0x1c
+ || (insn & 0x3) != 0x0)
+ /* BC1F, BC1T: bits 010000 1110x xxx00 */
+ && ((b5s5_op (insn) & 0x1c) != 0x1c
+ || (insn & 0x3) != 0x1))
+ /* BC1ANY*: bits 010000 111xx xxx01 */
+ break;
+ /* Fall through. */
+
+ case 0x25: /* BEQ: bits 100101 */
+ case 0x2d: /* BNE: bits 101101 */
+ insn <<= 16;
+ insn |= mips_fetch_instruction (gdbarch,
+ ISA_MICROMIPS, loc, NULL);
+ branch_bp = (loc + MIPS_INSN16_SIZE
+ + micromips_relative_offset16 (insn));
+ is_branch = 1;
+ break;
+
+ case 0x00: /* POOL32A: bits 000000 */
+ insn <<= 16;
+ insn |= mips_fetch_instruction (gdbarch,
+ ISA_MICROMIPS, loc, NULL);
+ if (b0s6_op (insn) != 0x3c
+ /* POOL32Axf: bits 000000 ... 111100 */
+ || (b6s10_ext (insn) & 0x2bf) != 0x3c)
+ /* JALR, JALR.HB: 000000 000x111100 111100 */
+ /* JALRS, JALRS.HB: 000000 010x111100 111100 */
+ break;
+ /* Fall through. */
+
+ case 0x1d: /* JALS: bits 011101 */
+ case 0x35: /* J: bits 110101 */
+ case 0x3d: /* JAL: bits 111101 */
+ case 0x3c: /* JALX: bits 111100 */
+ return 0; /* Fall back to the standard single-step code. */
+
+ case 0x18: /* POOL32C: bits 011000 */
+ if ((b12s4_op (insn) & 0xb) == 0xb)
+ /* SC, SCD: bits 011000 1x11 */
+ sc_found = 1;
+ break;
+ }
+ loc += MIPS_INSN16_SIZE;
+ break;
+
+ /* 16-bit instructions. */
+ case MIPS_INSN16_SIZE:
+ switch (micromips_op (insn))
+ {
+ case 0x23: /* BEQZ16: bits 100011 */
+ case 0x2b: /* BNEZ16: bits 101011 */
+ branch_bp = loc + micromips_relative_offset7 (insn);
+ is_branch = 1;
+ break;
+
+ case 0x11: /* POOL16C: bits 010001 */
+ if ((b5s5_op (insn) & 0x1c) != 0xc
+ /* JR16, JRC, JALR16, JALRS16: 010001 011xx */
+ && b5s5_op (insn) != 0x18)
+ /* JRADDIUSP: bits 010001 11000 */
+ break;
+ return 0; /* Fall back to the standard single-step code. */
+
+ case 0x33: /* B16: bits 110011 */
+ return 0; /* Fall back to the standard single-step code. */
+ }
+ break;
+ }
+ if (is_branch)
+ {
+ if (last_breakpoint >= 1)
+ return 0; /* More than one branch found, fallback to the
+ standard single-step code. */
+ breaks[1] = branch_bp;
+ last_breakpoint++;
+ }
+ }
+ if (!sc_found)
+ return 0;
+
+ /* Insert a breakpoint right after the end of the atomic sequence. */
+ breaks[0] = loc;
+
+ /* Check for duplicated breakpoints. Check also for a breakpoint
+ placed (branch instruction's destination) in the atomic sequence */
+ if (last_breakpoint && pc <= breaks[1] && breaks[1] <= breaks[0])
+ last_breakpoint = 0;
+
+ /* Effectively inserts the breakpoints. */
+ for (index = 0; index <= last_breakpoint; index++)
+ insert_single_step_breakpoint (gdbarch, aspace, breaks[index]);
+
+ return 1;
+}
+
+static int
+deal_with_atomic_sequence (struct gdbarch *gdbarch,
+ struct address_space *aspace, CORE_ADDR pc)
+{
+ if (mips_pc_is_mips (pc))
+ return mips_deal_with_atomic_sequence (gdbarch, aspace, pc);
+ else if (mips_pc_is_micromips (gdbarch, pc))
+ return micromips_deal_with_atomic_sequence (gdbarch, aspace, pc);
+ else
+ return 0;
+}
+
+/* mips_software_single_step() is called just before we want to resume
+ the inferior, if we want to single-step it but there is no hardware
+ or kernel single-step support (MIPS on GNU/Linux for example). We find
+ the target of the coming instruction and breakpoint it. */
+
+int
+mips_software_single_step (struct frame_info *frame)
+{
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+ struct address_space *aspace = get_frame_address_space (frame);
+ CORE_ADDR pc, next_pc;
+
+ pc = get_frame_pc (frame);
+ if (deal_with_atomic_sequence (gdbarch, aspace, pc))
+ return 1;
+
+ next_pc = mips_next_pc (frame, pc);
+
+ insert_single_step_breakpoint (gdbarch, aspace, next_pc);
+ return 1;
+}
+
+/* Test whether the PC points to the return instruction at the
+ end of a function. */
+
+static int
+mips_about_to_return (struct gdbarch *gdbarch, CORE_ADDR pc)
+{
+ ULONGEST insn;
+ ULONGEST hint;
+
+ /* This used to check for MIPS16, but this piece of code is never
+ called for MIPS16 functions. And likewise microMIPS ones. */
+ gdb_assert (mips_pc_is_mips (pc));
+
+ insn = mips_fetch_instruction (gdbarch, ISA_MIPS, pc, NULL);
+ hint = 0x7c0;
+ return (insn & ~hint) == 0x3e00008; /* jr(.hb) $ra */
+}
+
+
+/* This fencepost looks highly suspicious to me. Removing it also
+ seems suspicious as it could affect remote debugging across serial
+ lines. */
+
+static CORE_ADDR
+heuristic_proc_start (struct gdbarch *gdbarch, CORE_ADDR pc)
+{
+ CORE_ADDR start_pc;
+ CORE_ADDR fence;
+ int instlen;
+ int seen_adjsp = 0;
+ struct inferior *inf;
+
+ pc = gdbarch_addr_bits_remove (gdbarch, pc);
+ start_pc = pc;
+ fence = start_pc - heuristic_fence_post;
+ if (start_pc == 0)
+ return 0;
+
+ if (heuristic_fence_post == -1 || fence < VM_MIN_ADDRESS)
+ fence = VM_MIN_ADDRESS;
+
+ instlen = mips_pc_is_mips (pc) ? MIPS_INSN32_SIZE : MIPS_INSN16_SIZE;
+
+ inf = current_inferior ();
+
+ /* Search back for previous return. */
+ for (start_pc -= instlen;; start_pc -= instlen)
+ if (start_pc < fence)
+ {
+ /* It's not clear to me why we reach this point when
+ stop_soon, but with this test, at least we
+ don't print out warnings for every child forked (eg, on
+ decstation). 22apr93 rich@cygnus.com. */
+ if (inf->control.stop_soon == NO_STOP_QUIETLY)
+ {
+ static int blurb_printed = 0;
+
+ warning (_("GDB can't find the start of the function at %s."),
+ paddress (gdbarch, pc));
+
+ if (!blurb_printed)
+ {
+ /* This actually happens frequently in embedded
+ development, when you first connect to a board
+ and your stack pointer and pc are nowhere in
+ particular. This message needs to give people
+ in that situation enough information to
+ determine that it's no big deal. */
+ printf_filtered ("\n\
+ GDB is unable to find the start of the function at %s\n\
+and thus can't determine the size of that function's stack frame.\n\
+This means that GDB may be unable to access that stack frame, or\n\
+the frames below it.\n\
+ This problem is most likely caused by an invalid program counter or\n\
+stack pointer.\n\
+ However, if you think GDB should simply search farther back\n\
+from %s for code which looks like the beginning of a\n\
+function, you can increase the range of the search using the `set\n\
+heuristic-fence-post' command.\n",
+ paddress (gdbarch, pc), paddress (gdbarch, pc));
+ blurb_printed = 1;
+ }
+ }
+
+ return 0;
+ }
+ else if (mips_pc_is_mips16 (gdbarch, start_pc))
+ {
+ unsigned short inst;
+
+ /* On MIPS16, any one of the following is likely to be the
+ start of a function:
+ extend save
+ save
+ entry
+ addiu sp,-n
+ daddiu sp,-n
+ extend -n followed by 'addiu sp,+n' or 'daddiu sp,+n'. */
+ inst = mips_fetch_instruction (gdbarch, ISA_MIPS16, start_pc, NULL);
+ if ((inst & 0xff80) == 0x6480) /* save */
+ {
+ if (start_pc - instlen >= fence)
+ {
+ inst = mips_fetch_instruction (gdbarch, ISA_MIPS16,
+ start_pc - instlen, NULL);
+ if ((inst & 0xf800) == 0xf000) /* extend */
+ start_pc -= instlen;
+ }
+ break;
+ }
+ else if (((inst & 0xf81f) == 0xe809
+ && (inst & 0x700) != 0x700) /* entry */
+ || (inst & 0xff80) == 0x6380 /* addiu sp,-n */
+ || (inst & 0xff80) == 0xfb80 /* daddiu sp,-n */
+ || ((inst & 0xf810) == 0xf010 && seen_adjsp)) /* extend -n */
+ break;
+ else if ((inst & 0xff00) == 0x6300 /* addiu sp */
+ || (inst & 0xff00) == 0xfb00) /* daddiu sp */
+ seen_adjsp = 1;
+ else
+ seen_adjsp = 0;
+ }
+ else if (mips_pc_is_micromips (gdbarch, start_pc))
+ {
+ ULONGEST insn;
+ int stop = 0;
+ long offset;
+ int dreg;
+ int sreg;
+
+ /* On microMIPS, any one of the following is likely to be the
+ start of a function:
+ ADDIUSP -imm
+ (D)ADDIU $sp, -imm
+ LUI $gp, imm */
+ insn = mips_fetch_instruction (gdbarch, ISA_MICROMIPS, pc, NULL);
+ switch (micromips_op (insn))
+ {
+ case 0xc: /* ADDIU: bits 001100 */
+ case 0x17: /* DADDIU: bits 010111 */
+ sreg = b0s5_reg (insn);
+ dreg = b5s5_reg (insn);
+ insn <<= 16;
+ insn |= mips_fetch_instruction (gdbarch, ISA_MICROMIPS,
+ pc + MIPS_INSN16_SIZE, NULL);
+ offset = (b0s16_imm (insn) ^ 0x8000) - 0x8000;
+ if (sreg == MIPS_SP_REGNUM && dreg == MIPS_SP_REGNUM
+ /* (D)ADDIU $sp, imm */
+ && offset < 0)
+ stop = 1;
+ break;
+
+ case 0x10: /* POOL32I: bits 010000 */
+ if (b5s5_op (insn) == 0xd
+ /* LUI: bits 010000 001101 */
+ && b0s5_reg (insn >> 16) == 28)
+ /* LUI $gp, imm */
+ stop = 1;
+ break;
+
+ case 0x13: /* POOL16D: bits 010011 */
+ if ((insn & 0x1) == 0x1)
+ /* ADDIUSP: bits 010011 1 */
+ {
+ offset = micromips_decode_imm9 (b1s9_imm (insn));
+ if (offset < 0)
+ /* ADDIUSP -imm */
+ stop = 1;
+ }
+ else
+ /* ADDIUS5: bits 010011 0 */
+ {
+ dreg = b5s5_reg (insn);
+ offset = (b1s4_imm (insn) ^ 8) - 8;
+ if (dreg == MIPS_SP_REGNUM && offset < 0)
+ /* ADDIUS5 $sp, -imm */
+ stop = 1;
+ }
+ break;
+ }
+ if (stop)
+ break;
+ }
+ else if (mips_about_to_return (gdbarch, start_pc))
+ {
+ /* Skip return and its delay slot. */
+ start_pc += 2 * MIPS_INSN32_SIZE;
+ break;
+ }
+
+ return start_pc;
+}
+
+struct mips_objfile_private
+{
+ bfd_size_type size;
+ char *contents;
+};
+
+/* According to the current ABI, should the type be passed in a
+ floating-point register (assuming that there is space)? When there
+ is no FPU, FP are not even considered as possible candidates for
+ FP registers and, consequently this returns false - forces FP
+ arguments into integer registers. */
+
+static int
+fp_register_arg_p (struct gdbarch *gdbarch, enum type_code typecode,
+ struct type *arg_type)
+{
+ return ((typecode == TYPE_CODE_FLT
+ || (MIPS_EABI (gdbarch)
+ && (typecode == TYPE_CODE_STRUCT
+ || typecode == TYPE_CODE_UNION)
+ && TYPE_NFIELDS (arg_type) == 1
+ && TYPE_CODE (check_typedef (TYPE_FIELD_TYPE (arg_type, 0)))
+ == TYPE_CODE_FLT))
+ && MIPS_FPU_TYPE(gdbarch) != MIPS_FPU_NONE);
+}
+
+/* On o32, argument passing in GPRs depends on the alignment of the type being
+ passed. Return 1 if this type must be aligned to a doubleword boundary. */
+
+static int
+mips_type_needs_double_align (struct type *type)
+{
+ enum type_code typecode = TYPE_CODE (type);
+
+ if (typecode == TYPE_CODE_FLT && TYPE_LENGTH (type) == 8)
return 1;
+ else if (typecode == TYPE_CODE_STRUCT)
+ {
+ if (TYPE_NFIELDS (type) < 1)
+ return 0;
+ return mips_type_needs_double_align (TYPE_FIELD_TYPE (type, 0));
+ }
+ else if (typecode == TYPE_CODE_UNION)
+ {
+ int i, n;
+ n = TYPE_NFIELDS (type);
+ for (i = 0; i < n; i++)
+ if (mips_type_needs_double_align (TYPE_FIELD_TYPE (type, i)))
+ return 1;
+ return 0;
+ }
return 0;
}
-static const struct frame_unwind mips_stub_frame_unwind =
-{
- NORMAL_FRAME,
- mips_stub_frame_this_id,
- mips_stub_frame_prev_register,
- NULL,
- mips_stub_frame_sniffer
-};
-
+/* Adjust the address downward (direction of stack growth) so that it
+ is correctly aligned for a new stack frame. */
static CORE_ADDR
-mips_stub_frame_base_address (struct frame_info *this_frame,
- void **this_cache)
+mips_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr)
{
- struct trad_frame_cache *this_trad_cache
- = mips_stub_frame_cache (this_frame, this_cache);
- return trad_frame_get_this_base (this_trad_cache);
+ return align_down (addr, 16);
}
-static const struct frame_base mips_stub_frame_base =
-{
- &mips_stub_frame_unwind,
- mips_stub_frame_base_address,
- mips_stub_frame_base_address,
- mips_stub_frame_base_address
-};
+/* Implement the "push_dummy_code" gdbarch method. */
-static const struct frame_base *
-mips_stub_frame_base_sniffer (struct frame_info *this_frame)
-{
- if (mips_stub_frame_sniffer (&mips_stub_frame_unwind, this_frame, NULL))
- return &mips_stub_frame_base;
- else
- return NULL;
-}
+static CORE_ADDR
+mips_push_dummy_code (struct gdbarch *gdbarch, CORE_ADDR sp,
+ CORE_ADDR funaddr, struct value **args,
+ int nargs, struct type *value_type,
+ CORE_ADDR *real_pc, CORE_ADDR *bp_addr,
+ struct regcache *regcache)
+{
+ static gdb_byte nop_insn[] = { 0, 0, 0, 0 };
+ CORE_ADDR nop_addr;
+ CORE_ADDR bp_slot;
+
+ /* Reserve enough room on the stack for our breakpoint instruction. */
+ bp_slot = sp - sizeof (nop_insn);
+
+ /* Return to microMIPS mode if calling microMIPS code to avoid
+ triggering an address error exception on processors that only
+ support microMIPS execution. */
+ *bp_addr = (mips_pc_is_micromips (gdbarch, funaddr)
+ ? make_compact_addr (bp_slot) : bp_slot);
+
+ /* The breakpoint layer automatically adjusts the address of
+ breakpoints inserted in a branch delay slot. With enough
+ bad luck, the 4 bytes located just before our breakpoint
+ instruction could look like a branch instruction, and thus
+ trigger the adjustement, and break the function call entirely.
+ So, we reserve those 4 bytes and write a nop instruction
+ to prevent that from happening. */
+ nop_addr = bp_slot - sizeof (nop_insn);
+ write_memory (nop_addr, nop_insn, sizeof (nop_insn));
+ sp = mips_frame_align (gdbarch, nop_addr);
+
+ /* Inferior resumes at the function entry point. */
+ *real_pc = funaddr;
-/* mips_addr_bits_remove - remove useless address bits */
+ return sp;
+}
static CORE_ADDR
-mips_addr_bits_remove (struct gdbarch *gdbarch, CORE_ADDR addr)
+mips_eabi_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
+ struct regcache *regcache, CORE_ADDR bp_addr,
+ int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
{
- struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
-
- if (is_mips16_addr (addr))
- addr = unmake_mips16_addr (addr);
+ int argreg;
+ int float_argreg;
+ int argnum;
+ int len = 0;
+ int stack_offset = 0;
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ CORE_ADDR func_addr = find_function_addr (function, NULL);
+ int regsize = mips_abi_regsize (gdbarch);
- if (mips_mask_address_p (tdep) && (((ULONGEST) addr) >> 32 == 0xffffffffUL))
- /* This hack is a work-around for existing boards using PMON, the
- simulator, and any other 64-bit targets that doesn't have true
- 64-bit addressing. On these targets, the upper 32 bits of
- addresses are ignored by the hardware. Thus, the PC or SP are
- likely to have been sign extended to all 1s by instruction
- sequences that load 32-bit addresses. For example, a typical
- piece of code that loads an address is this:
+ /* For shared libraries, "t9" needs to point at the function
+ address. */
+ regcache_cooked_write_signed (regcache, MIPS_T9_REGNUM, func_addr);
- lui $r2, <upper 16 bits>
- ori $r2, <lower 16 bits>
+ /* Set the return address register to point to the entry point of
+ the program, where a breakpoint lies in wait. */
+ regcache_cooked_write_signed (regcache, MIPS_RA_REGNUM, bp_addr);
- But the lui sign-extends the value such that the upper 32 bits
- may be all 1s. The workaround is simply to mask off these
- bits. In the future, gcc may be changed to support true 64-bit
- addressing, and this masking will have to be disabled. */
- return addr &= 0xffffffffUL;
- else
- return addr;
-}
+ /* First ensure that the stack and structure return address (if any)
+ are properly aligned. The stack has to be at least 64-bit
+ aligned even on 32-bit machines, because doubles must be 64-bit
+ aligned. For n32 and n64, stack frames need to be 128-bit
+ aligned, so we round to this widest known alignment. */
-/* Instructions used during single-stepping of atomic sequences. */
-#define LL_OPCODE 0x30
-#define LLD_OPCODE 0x34
-#define SC_OPCODE 0x38
-#define SCD_OPCODE 0x3c
+ sp = align_down (sp, 16);
+ struct_addr = align_down (struct_addr, 16);
-/* Checks for an atomic sequence of instructions beginning with a LL/LLD
- instruction and ending with a SC/SCD instruction. If such a sequence
- is found, attempt to step through it. A breakpoint is placed at the end of
- the sequence. */
+ /* Now make space on the stack for the args. We allocate more
+ than necessary for EABI, because the first few arguments are
+ passed in registers, but that's OK. */
+ for (argnum = 0; argnum < nargs; argnum++)
+ len += align_up (TYPE_LENGTH (value_type (args[argnum])), regsize);
+ sp -= align_up (len, 16);
-static int
-deal_with_atomic_sequence (struct gdbarch *gdbarch,
- struct address_space *aspace, CORE_ADDR pc)
-{
- CORE_ADDR breaks[2] = {-1, -1};
- CORE_ADDR loc = pc;
- CORE_ADDR branch_bp; /* Breakpoint at branch instruction's destination. */
- unsigned long insn;
- int insn_count;
- int index;
- int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
- const int atomic_sequence_length = 16; /* Instruction sequence length. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_eabi_push_dummy_call: sp=%s allocated %ld\n",
+ paddress (gdbarch, sp), (long) align_up (len, 16));
- if (pc & 0x01)
- return 0;
+ /* Initialize the integer and float register pointers. */
+ argreg = MIPS_A0_REGNUM;
+ float_argreg = mips_fpa0_regnum (gdbarch);
- insn = mips_fetch_instruction (gdbarch, loc);
- /* Assume all atomic sequences start with a ll/lld instruction. */
- if (itype_op (insn) != LL_OPCODE && itype_op (insn) != LLD_OPCODE)
- return 0;
+ /* The struct_return pointer occupies the first parameter-passing reg. */
+ if (struct_return)
+ {
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_eabi_push_dummy_call: "
+ "struct_return reg=%d %s\n",
+ argreg, paddress (gdbarch, struct_addr));
+ regcache_cooked_write_unsigned (regcache, argreg++, struct_addr);
+ }
- /* Assume that no atomic sequence is longer than "atomic_sequence_length"
- instructions. */
- for (insn_count = 0; insn_count < atomic_sequence_length; ++insn_count)
+ /* Now load as many as possible of the first arguments into
+ registers, and push the rest onto the stack. Loop thru args
+ from first to last. */
+ for (argnum = 0; argnum < nargs; argnum++)
{
- int is_branch = 0;
- loc += MIPS_INSN32_SIZE;
- insn = mips_fetch_instruction (gdbarch, loc);
+ const gdb_byte *val;
+ gdb_byte valbuf[MAX_REGISTER_SIZE];
+ struct value *arg = args[argnum];
+ struct type *arg_type = check_typedef (value_type (arg));
+ int len = TYPE_LENGTH (arg_type);
+ enum type_code typecode = TYPE_CODE (arg_type);
- /* Assume that there is at most one branch in the atomic
- sequence. If a branch is found, put a breakpoint in its
- destination address. */
- switch (itype_op (insn))
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_eabi_push_dummy_call: %d len=%d type=%d",
+ argnum + 1, len, (int) typecode);
+
+ /* The EABI passes structures that do not fit in a register by
+ reference. */
+ if (len > regsize
+ && (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION))
{
- case 0: /* SPECIAL */
- if (rtype_funct (insn) >> 1 == 4) /* JR, JALR */
- return 0; /* fallback to the standard single-step code. */
- break;
- case 1: /* REGIMM */
- is_branch = ((itype_rt (insn) & 0xc0) == 0); /* B{LT,GE}Z* */
- break;
- case 2: /* J */
- case 3: /* JAL */
- return 0; /* fallback to the standard single-step code. */
- case 4: /* BEQ */
- case 5: /* BNE */
- case 6: /* BLEZ */
- case 7: /* BGTZ */
- case 20: /* BEQL */
- case 21: /* BNEL */
- case 22: /* BLEZL */
- case 23: /* BGTTL */
- is_branch = 1;
- break;
- case 17: /* COP1 */
- case 18: /* COP2 */
- case 19: /* COP3 */
- is_branch = (itype_rs (insn) == 8); /* BCzF, BCzFL, BCzT, BCzTL */
- break;
+ store_unsigned_integer (valbuf, regsize, byte_order,
+ value_address (arg));
+ typecode = TYPE_CODE_PTR;
+ len = regsize;
+ val = valbuf;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " push");
}
- if (is_branch)
+ else
+ val = value_contents (arg);
+
+ /* 32-bit ABIs always start floating point arguments in an
+ even-numbered floating point register. Round the FP register
+ up before the check to see if there are any FP registers
+ left. Non MIPS_EABI targets also pass the FP in the integer
+ registers so also round up normal registers. */
+ if (regsize < 8 && fp_register_arg_p (gdbarch, typecode, arg_type))
{
- branch_bp = loc + mips32_relative_offset (insn) + 4;
- if (last_breakpoint >= 1)
- return 0; /* More than one branch found, fallback to the
- standard single-step code. */
- breaks[1] = branch_bp;
- last_breakpoint++;
+ if ((float_argreg & 1))
+ float_argreg++;
+ }
+
+ /* Floating point arguments passed in registers have to be
+ treated specially. On 32-bit architectures, doubles
+ are passed in register pairs; the even register gets
+ the low word, and the odd register gets the high word.
+ On non-EABI processors, the first two floating point arguments are
+ also copied to general registers, because MIPS16 functions
+ don't use float registers for arguments. This duplication of
+ arguments in general registers can't hurt non-MIPS16 functions
+ because those registers are normally skipped. */
+ /* MIPS_EABI squeezes a struct that contains a single floating
+ point value into an FP register instead of pushing it onto the
+ stack. */
+ if (fp_register_arg_p (gdbarch, typecode, arg_type)
+ && float_argreg <= MIPS_LAST_FP_ARG_REGNUM (gdbarch))
+ {
+ /* EABI32 will pass doubles in consecutive registers, even on
+ 64-bit cores. At one time, we used to check the size of
+ `float_argreg' to determine whether or not to pass doubles
+ in consecutive registers, but this is not sufficient for
+ making the ABI determination. */
+ if (len == 8 && mips_abi (gdbarch) == MIPS_ABI_EABI32)
+ {
+ int low_offset = gdbarch_byte_order (gdbarch)
+ == BFD_ENDIAN_BIG ? 4 : 0;
+ long regval;
+
+ /* Write the low word of the double to the even register(s). */
+ regval = extract_signed_integer (val + low_offset,
+ 4, byte_order);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg, phex (regval, 4));
+ regcache_cooked_write_signed (regcache, float_argreg++, regval);
+
+ /* Write the high word of the double to the odd register(s). */
+ regval = extract_signed_integer (val + 4 - low_offset,
+ 4, byte_order);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg, phex (regval, 4));
+ regcache_cooked_write_signed (regcache, float_argreg++, regval);
+ }
+ else
+ {
+ /* This is a floating point value that fits entirely
+ in a single register. */
+ /* On 32 bit ABI's the float_argreg is further adjusted
+ above to ensure that it is even register aligned. */
+ LONGEST regval = extract_signed_integer (val, len, byte_order);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg, phex (regval, len));
+ regcache_cooked_write_signed (regcache, float_argreg++, regval);
+ }
}
+ else
+ {
+ /* Copy the argument to general registers or the stack in
+ register-sized pieces. Large arguments are split between
+ registers and stack. */
+ /* Note: structs whose size is not a multiple of regsize
+ are treated specially: Irix cc passes
+ them in registers where gcc sometimes puts them on the
+ stack. For maximum compatibility, we will put them in
+ both places. */
+ int odd_sized_struct = (len > regsize && len % regsize != 0);
- if (itype_op (insn) == SC_OPCODE || itype_op (insn) == SCD_OPCODE)
- break;
- }
+ /* Note: Floating-point values that didn't fit into an FP
+ register are only written to memory. */
+ while (len > 0)
+ {
+ /* Remember if the argument was written to the stack. */
+ int stack_used_p = 0;
+ int partial_len = (len < regsize ? len : regsize);
- /* Assume that the atomic sequence ends with a sc/scd instruction. */
- if (itype_op (insn) != SC_OPCODE && itype_op (insn) != SCD_OPCODE)
- return 0;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
+ partial_len);
- loc += MIPS_INSN32_SIZE;
+ /* Write this portion of the argument to the stack. */
+ if (argreg > MIPS_LAST_ARG_REGNUM (gdbarch)
+ || odd_sized_struct
+ || fp_register_arg_p (gdbarch, typecode, arg_type))
+ {
+ /* Should shorter than int integer values be
+ promoted to int before being stored? */
+ int longword_offset = 0;
+ CORE_ADDR addr;
+ stack_used_p = 1;
+ if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
+ {
+ if (regsize == 8
+ && (typecode == TYPE_CODE_INT
+ || typecode == TYPE_CODE_PTR
+ || typecode == TYPE_CODE_FLT) && len <= 4)
+ longword_offset = regsize - len;
+ else if ((typecode == TYPE_CODE_STRUCT
+ || typecode == TYPE_CODE_UNION)
+ && TYPE_LENGTH (arg_type) < regsize)
+ longword_offset = regsize - len;
+ }
- /* Insert a breakpoint right after the end of the atomic sequence. */
- breaks[0] = loc;
+ if (mips_debug)
+ {
+ fprintf_unfiltered (gdb_stdlog, " - stack_offset=%s",
+ paddress (gdbarch, stack_offset));
+ fprintf_unfiltered (gdb_stdlog, " longword_offset=%s",
+ paddress (gdbarch, longword_offset));
+ }
- /* Check for duplicated breakpoints. Check also for a breakpoint
- placed (branch instruction's destination) in the atomic sequence. */
- if (last_breakpoint && pc <= breaks[1] && breaks[1] <= breaks[0])
- last_breakpoint = 0;
+ addr = sp + stack_offset + longword_offset;
- /* Effectively inserts the breakpoints. */
- for (index = 0; index <= last_breakpoint; index++)
- insert_single_step_breakpoint (gdbarch, aspace, breaks[index]);
+ if (mips_debug)
+ {
+ int i;
+ fprintf_unfiltered (gdb_stdlog, " @%s ",
+ paddress (gdbarch, addr));
+ for (i = 0; i < partial_len; i++)
+ {
+ fprintf_unfiltered (gdb_stdlog, "%02x",
+ val[i] & 0xff);
+ }
+ }
+ write_memory (addr, val, partial_len);
+ }
- return 1;
-}
+ /* Note!!! This is NOT an else clause. Odd sized
+ structs may go thru BOTH paths. Floating point
+ arguments will not. */
+ /* Write this portion of the argument to a general
+ purpose register. */
+ if (argreg <= MIPS_LAST_ARG_REGNUM (gdbarch)
+ && !fp_register_arg_p (gdbarch, typecode, arg_type))
+ {
+ LONGEST regval =
+ extract_signed_integer (val, partial_len, byte_order);
-/* mips_software_single_step() is called just before we want to resume
- the inferior, if we want to single-step it but there is no hardware
- or kernel single-step support (MIPS on GNU/Linux for example). We find
- the target of the coming instruction and breakpoint it. */
+ if (mips_debug)
+ fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
+ argreg,
+ phex (regval, regsize));
+ regcache_cooked_write_signed (regcache, argreg, regval);
+ argreg++;
+ }
-int
-mips_software_single_step (struct frame_info *frame)
-{
- struct gdbarch *gdbarch = get_frame_arch (frame);
- struct address_space *aspace = get_frame_address_space (frame);
- CORE_ADDR pc, next_pc;
+ len -= partial_len;
+ val += partial_len;
- pc = get_frame_pc (frame);
- if (deal_with_atomic_sequence (gdbarch, aspace, pc))
- return 1;
+ /* Compute the offset into the stack at which we will
+ copy the next parameter.
- next_pc = mips_next_pc (frame, pc);
+ In the new EABI (and the NABI32), the stack_offset
+ only needs to be adjusted when it has been used. */
- insert_single_step_breakpoint (gdbarch, aspace, next_pc);
- return 1;
-}
+ if (stack_used_p)
+ stack_offset += align_up (partial_len, regsize);
+ }
+ }
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, "\n");
+ }
-/* Test whether the PC points to the return instruction at the
- end of a function. */
+ regcache_cooked_write_signed (regcache, MIPS_SP_REGNUM, sp);
-static int
-mips_about_to_return (struct gdbarch *gdbarch, CORE_ADDR pc)
-{
- if (mips_pc_is_mips16 (pc))
- /* This mips16 case isn't necessarily reliable. Sometimes the compiler
- generates a "jr $ra"; other times it generates code to load
- the return address from the stack to an accessible register (such
- as $a3), then a "jr" using that register. This second case
- is almost impossible to distinguish from an indirect jump
- used for switch statements, so we don't even try. */
- return mips_fetch_instruction (gdbarch, pc) == 0xe820; /* jr $ra */
- else
- return mips_fetch_instruction (gdbarch, pc) == 0x3e00008; /* jr $ra */
+ /* Return adjusted stack pointer. */
+ return sp;
}
+/* Determine the return value convention being used. */
-/* This fencepost looks highly suspicious to me. Removing it also
- seems suspicious as it could affect remote debugging across serial
- lines. */
-
-static CORE_ADDR
-heuristic_proc_start (struct gdbarch *gdbarch, CORE_ADDR pc)
+static enum return_value_convention
+mips_eabi_return_value (struct gdbarch *gdbarch, struct value *function,
+ struct type *type, struct regcache *regcache,
+ gdb_byte *readbuf, const gdb_byte *writebuf)
{
- CORE_ADDR start_pc;
- CORE_ADDR fence;
- int instlen;
- int seen_adjsp = 0;
- struct inferior *inf;
-
- pc = gdbarch_addr_bits_remove (gdbarch, pc);
- start_pc = pc;
- fence = start_pc - heuristic_fence_post;
- if (start_pc == 0)
- return 0;
-
- if (heuristic_fence_post == UINT_MAX || fence < VM_MIN_ADDRESS)
- fence = VM_MIN_ADDRESS;
-
- instlen = mips_pc_is_mips16 (pc) ? MIPS_INSN16_SIZE : MIPS_INSN32_SIZE;
-
- inf = current_inferior ();
-
- /* Search back for previous return. */
- for (start_pc -= instlen;; start_pc -= instlen)
- if (start_pc < fence)
- {
- /* It's not clear to me why we reach this point when
- stop_soon, but with this test, at least we
- don't print out warnings for every child forked (eg, on
- decstation). 22apr93 rich@cygnus.com. */
- if (inf->control.stop_soon == NO_STOP_QUIETLY)
- {
- static int blurb_printed = 0;
-
- warning (_("GDB can't find the start of the function at %s."),
- paddress (gdbarch, pc));
-
- if (!blurb_printed)
- {
- /* This actually happens frequently in embedded
- development, when you first connect to a board
- and your stack pointer and pc are nowhere in
- particular. This message needs to give people
- in that situation enough information to
- determine that it's no big deal. */
- printf_filtered ("\n\
- GDB is unable to find the start of the function at %s\n\
-and thus can't determine the size of that function's stack frame.\n\
-This means that GDB may be unable to access that stack frame, or\n\
-the frames below it.\n\
- This problem is most likely caused by an invalid program counter or\n\
-stack pointer.\n\
- However, if you think GDB should simply search farther back\n\
-from %s for code which looks like the beginning of a\n\
-function, you can increase the range of the search using the `set\n\
-heuristic-fence-post' command.\n",
- paddress (gdbarch, pc), paddress (gdbarch, pc));
- blurb_printed = 1;
- }
- }
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ int fp_return_type = 0;
+ int offset, regnum, xfer;
- return 0;
- }
- else if (mips_pc_is_mips16 (start_pc))
- {
- unsigned short inst;
+ if (TYPE_LENGTH (type) > 2 * mips_abi_regsize (gdbarch))
+ return RETURN_VALUE_STRUCT_CONVENTION;
- /* On MIPS16, any one of the following is likely to be the
- start of a function:
- extend save
- save
- entry
- addiu sp,-n
- daddiu sp,-n
- extend -n followed by 'addiu sp,+n' or 'daddiu sp,+n'. */
- inst = mips_fetch_instruction (gdbarch, start_pc);
- if ((inst & 0xff80) == 0x6480) /* save */
- {
- if (start_pc - instlen >= fence)
- {
- inst = mips_fetch_instruction (gdbarch, start_pc - instlen);
- if ((inst & 0xf800) == 0xf000) /* extend */
- start_pc -= instlen;
- }
- break;
- }
- else if (((inst & 0xf81f) == 0xe809
- && (inst & 0x700) != 0x700) /* entry */
- || (inst & 0xff80) == 0x6380 /* addiu sp,-n */
- || (inst & 0xff80) == 0xfb80 /* daddiu sp,-n */
- || ((inst & 0xf810) == 0xf010 && seen_adjsp)) /* extend -n */
- break;
- else if ((inst & 0xff00) == 0x6300 /* addiu sp */
- || (inst & 0xff00) == 0xfb00) /* daddiu sp */
- seen_adjsp = 1;
- else
- seen_adjsp = 0;
- }
- else if (mips_about_to_return (gdbarch, start_pc))
- {
- /* Skip return and its delay slot. */
- start_pc += 2 * MIPS_INSN32_SIZE;
- break;
- }
+ /* Floating point type? */
+ if (tdep->mips_fpu_type != MIPS_FPU_NONE)
+ {
+ if (TYPE_CODE (type) == TYPE_CODE_FLT)
+ fp_return_type = 1;
+ /* Structs with a single field of float type
+ are returned in a floating point register. */
+ if ((TYPE_CODE (type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (type) == TYPE_CODE_UNION)
+ && TYPE_NFIELDS (type) == 1)
+ {
+ struct type *fieldtype = TYPE_FIELD_TYPE (type, 0);
- return start_pc;
+ if (TYPE_CODE (check_typedef (fieldtype)) == TYPE_CODE_FLT)
+ fp_return_type = 1;
+ }
+ }
+
+ if (fp_return_type)
+ {
+ /* A floating-point value belongs in the least significant part
+ of FP0/FP1. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
+ regnum = mips_regnum (gdbarch)->fp0;
+ }
+ else
+ {
+ /* An integer value goes in V0/V1. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return scalar in $v0\n");
+ regnum = MIPS_V0_REGNUM;
+ }
+ for (offset = 0;
+ offset < TYPE_LENGTH (type);
+ offset += mips_abi_regsize (gdbarch), regnum++)
+ {
+ xfer = mips_abi_regsize (gdbarch);
+ if (offset + xfer > TYPE_LENGTH (type))
+ xfer = TYPE_LENGTH (type) - offset;
+ mips_xfer_register (gdbarch, regcache,
+ gdbarch_num_regs (gdbarch) + regnum, xfer,
+ gdbarch_byte_order (gdbarch), readbuf, writebuf,
+ offset);
+ }
+
+ return RETURN_VALUE_REGISTER_CONVENTION;
}
-struct mips_objfile_private
-{
- bfd_size_type size;
- char *contents;
-};
-/* According to the current ABI, should the type be passed in a
- floating-point register (assuming that there is space)? When there
- is no FPU, FP are not even considered as possible candidates for
- FP registers and, consequently this returns false - forces FP
- arguments into integer registers. */
+/* N32/N64 ABI stuff. */
+
+/* Search for a naturally aligned double at OFFSET inside a struct
+ ARG_TYPE. The N32 / N64 ABIs pass these in floating point
+ registers. */
static int
-fp_register_arg_p (struct gdbarch *gdbarch, enum type_code typecode,
- struct type *arg_type)
+mips_n32n64_fp_arg_chunk_p (struct gdbarch *gdbarch, struct type *arg_type,
+ int offset)
{
- return ((typecode == TYPE_CODE_FLT
- || (MIPS_EABI (gdbarch)
- && (typecode == TYPE_CODE_STRUCT
- || typecode == TYPE_CODE_UNION)
- && TYPE_NFIELDS (arg_type) == 1
- && TYPE_CODE (check_typedef (TYPE_FIELD_TYPE (arg_type, 0)))
- == TYPE_CODE_FLT))
- && MIPS_FPU_TYPE(gdbarch) != MIPS_FPU_NONE);
-}
+ int i;
-/* On o32, argument passing in GPRs depends on the alignment of the type being
- passed. Return 1 if this type must be aligned to a doubleword boundary. */
+ if (TYPE_CODE (arg_type) != TYPE_CODE_STRUCT)
+ return 0;
-static int
-mips_type_needs_double_align (struct type *type)
-{
- enum type_code typecode = TYPE_CODE (type);
+ if (MIPS_FPU_TYPE (gdbarch) != MIPS_FPU_DOUBLE)
+ return 0;
- if (typecode == TYPE_CODE_FLT && TYPE_LENGTH (type) == 8)
- return 1;
- else if (typecode == TYPE_CODE_STRUCT)
+ if (TYPE_LENGTH (arg_type) < offset + MIPS64_REGSIZE)
+ return 0;
+
+ for (i = 0; i < TYPE_NFIELDS (arg_type); i++)
{
- if (TYPE_NFIELDS (type) < 1)
+ int pos;
+ struct type *field_type;
+
+ /* We're only looking at normal fields. */
+ if (field_is_static (&TYPE_FIELD (arg_type, i))
+ || (TYPE_FIELD_BITPOS (arg_type, i) % 8) != 0)
+ continue;
+
+ /* If we have gone past the offset, there is no double to pass. */
+ pos = TYPE_FIELD_BITPOS (arg_type, i) / 8;
+ if (pos > offset)
return 0;
- return mips_type_needs_double_align (TYPE_FIELD_TYPE (type, 0));
- }
- else if (typecode == TYPE_CODE_UNION)
- {
- int i, n;
- n = TYPE_NFIELDS (type);
- for (i = 0; i < n; i++)
- if (mips_type_needs_double_align (TYPE_FIELD_TYPE (type, i)))
- return 1;
- return 0;
+ field_type = check_typedef (TYPE_FIELD_TYPE (arg_type, i));
+
+ /* If this field is entirely before the requested offset, go
+ on to the next one. */
+ if (pos + TYPE_LENGTH (field_type) <= offset)
+ continue;
+
+ /* If this is our special aligned double, we can stop. */
+ if (TYPE_CODE (field_type) == TYPE_CODE_FLT
+ && TYPE_LENGTH (field_type) == MIPS64_REGSIZE)
+ return 1;
+
+ /* This field starts at or before the requested offset, and
+ overlaps it. If it is a structure, recurse inwards. */
+ return mips_n32n64_fp_arg_chunk_p (gdbarch, field_type, offset - pos);
}
- return 0;
-}
-/* Adjust the address downward (direction of stack growth) so that it
- is correctly aligned for a new stack frame. */
-static CORE_ADDR
-mips_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr)
-{
- return align_down (addr, 16);
+ return 0;
}
static CORE_ADDR
-mips_eabi_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
- struct regcache *regcache, CORE_ADDR bp_addr,
- int nargs, struct value **args, CORE_ADDR sp,
- int struct_return, CORE_ADDR struct_addr)
+mips_n32n64_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
+ struct regcache *regcache, CORE_ADDR bp_addr,
+ int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
{
int argreg;
int float_argreg;
int argnum;
int len = 0;
int stack_offset = 0;
- struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
CORE_ADDR func_addr = find_function_addr (function, NULL);
- int regsize = mips_abi_regsize (gdbarch);
/* For shared libraries, "t9" needs to point at the function
address. */
sp = align_down (sp, 16);
struct_addr = align_down (struct_addr, 16);
- /* Now make space on the stack for the args. We allocate more
- than necessary for EABI, because the first few arguments are
- passed in registers, but that's OK. */
+ /* Now make space on the stack for the args. */
for (argnum = 0; argnum < nargs; argnum++)
- len += align_up (TYPE_LENGTH (value_type (args[argnum])), regsize);
+ len += align_up (TYPE_LENGTH (value_type (args[argnum])), MIPS64_REGSIZE);
sp -= align_up (len, 16);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_eabi_push_dummy_call: sp=%s allocated %ld\n",
+ "mips_n32n64_push_dummy_call: sp=%s allocated %ld\n",
paddress (gdbarch, sp), (long) align_up (len, 16));
/* Initialize the integer and float register pointers. */
{
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_eabi_push_dummy_call: "
+ "mips_n32n64_push_dummy_call: "
"struct_return reg=%d %s\n",
argreg, paddress (gdbarch, struct_addr));
regcache_cooked_write_unsigned (regcache, argreg++, struct_addr);
for (argnum = 0; argnum < nargs; argnum++)
{
const gdb_byte *val;
- gdb_byte valbuf[MAX_REGISTER_SIZE];
struct value *arg = args[argnum];
struct type *arg_type = check_typedef (value_type (arg));
int len = TYPE_LENGTH (arg_type);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_eabi_push_dummy_call: %d len=%d type=%d",
+ "mips_n32n64_push_dummy_call: %d len=%d type=%d",
argnum + 1, len, (int) typecode);
- /* Function pointer arguments to mips16 code need to be made into
- mips16 pointers. */
- if (typecode == TYPE_CODE_PTR
- && TYPE_CODE (TYPE_TARGET_TYPE (arg_type)) == TYPE_CODE_FUNC)
- {
- CORE_ADDR addr = extract_signed_integer (value_contents (arg),
- len, byte_order);
- if (mips_pc_is_mips16 (addr))
- {
- store_signed_integer (valbuf, len, byte_order,
- make_mips16_addr (addr));
- val = valbuf;
- }
- else
- val = value_contents (arg);
- }
- /* The EABI passes structures that do not fit in a register by
- reference. */
- else if (len > regsize
- && (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION))
- {
- store_unsigned_integer (valbuf, regsize, byte_order,
- value_address (arg));
- typecode = TYPE_CODE_PTR;
- len = regsize;
- val = valbuf;
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " push");
- }
- else
- val = value_contents (arg);
+ val = value_contents (arg);
- /* 32-bit ABIs always start floating point arguments in an
- even-numbered floating point register. Round the FP register
- up before the check to see if there are any FP registers
- left. Non MIPS_EABI targets also pass the FP in the integer
- registers so also round up normal registers. */
- if (regsize < 8 && fp_register_arg_p (gdbarch, typecode, arg_type))
+ /* A 128-bit long double value requires an even-odd pair of
+ floating-point registers. */
+ if (len == 16
+ && fp_register_arg_p (gdbarch, typecode, arg_type)
+ && (float_argreg & 1))
{
- if ((float_argreg & 1))
- float_argreg++;
+ float_argreg++;
+ argreg++;
}
- /* Floating point arguments passed in registers have to be
- treated specially. On 32-bit architectures, doubles
- are passed in register pairs; the even register gets
- the low word, and the odd register gets the high word.
- On non-EABI processors, the first two floating point arguments are
- also copied to general registers, because MIPS16 functions
- don't use float registers for arguments. This duplication of
- arguments in general registers can't hurt non-MIPS16 functions
- because those registers are normally skipped. */
- /* MIPS_EABI squeezes a struct that contains a single floating
- point value into an FP register instead of pushing it onto the
- stack. */
if (fp_register_arg_p (gdbarch, typecode, arg_type)
- && float_argreg <= MIPS_LAST_FP_ARG_REGNUM (gdbarch))
+ && argreg <= MIPS_LAST_ARG_REGNUM (gdbarch))
{
- /* EABI32 will pass doubles in consecutive registers, even on
- 64-bit cores. At one time, we used to check the size of
- `float_argreg' to determine whether or not to pass doubles
- in consecutive registers, but this is not sufficient for
- making the ABI determination. */
- if (len == 8 && mips_abi (gdbarch) == MIPS_ABI_EABI32)
- {
- int low_offset = gdbarch_byte_order (gdbarch)
- == BFD_ENDIAN_BIG ? 4 : 0;
- long regval;
-
- /* Write the low word of the double to the even register(s). */
- regval = extract_signed_integer (val + low_offset,
- 4, byte_order);
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
- float_argreg, phex (regval, 4));
- regcache_cooked_write_signed (regcache, float_argreg++, regval);
+ /* This is a floating point value that fits entirely
+ in a single register or a pair of registers. */
+ int reglen = (len <= MIPS64_REGSIZE ? len : MIPS64_REGSIZE);
+ LONGEST regval = extract_unsigned_integer (val, reglen, byte_order);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg, phex (regval, reglen));
+ regcache_cooked_write_unsigned (regcache, float_argreg, regval);
- /* Write the high word of the double to the odd register(s). */
- regval = extract_signed_integer (val + 4 - low_offset,
- 4, byte_order);
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
- float_argreg, phex (regval, 4));
- regcache_cooked_write_signed (regcache, float_argreg++, regval);
- }
- else
- {
- /* This is a floating point value that fits entirely
- in a single register. */
- /* On 32 bit ABI's the float_argreg is further adjusted
- above to ensure that it is even register aligned. */
- LONGEST regval = extract_signed_integer (val, len, byte_order);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
+ argreg, phex (regval, reglen));
+ regcache_cooked_write_unsigned (regcache, argreg, regval);
+ float_argreg++;
+ argreg++;
+ if (len == 16)
+ {
+ regval = extract_unsigned_integer (val + reglen,
+ reglen, byte_order);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
- float_argreg, phex (regval, len));
- regcache_cooked_write_signed (regcache, float_argreg++, regval);
+ float_argreg, phex (regval, reglen));
+ regcache_cooked_write_unsigned (regcache, float_argreg, regval);
+
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
+ argreg, phex (regval, reglen));
+ regcache_cooked_write_unsigned (regcache, argreg, regval);
+ float_argreg++;
+ argreg++;
}
}
else
/* Copy the argument to general registers or the stack in
register-sized pieces. Large arguments are split between
registers and stack. */
- /* Note: structs whose size is not a multiple of regsize
- are treated specially: Irix cc passes
- them in registers where gcc sometimes puts them on the
- stack. For maximum compatibility, we will put them in
- both places. */
- int odd_sized_struct = (len > regsize && len % regsize != 0);
-
+ /* For N32/N64, structs, unions, or other composite types are
+ treated as a sequence of doublewords, and are passed in integer
+ or floating point registers as though they were simple scalar
+ parameters to the extent that they fit, with any excess on the
+ stack packed according to the normal memory layout of the
+ object.
+ The caller does not reserve space for the register arguments;
+ the callee is responsible for reserving it if required. */
/* Note: Floating-point values that didn't fit into an FP
register are only written to memory. */
while (len > 0)
{
/* Remember if the argument was written to the stack. */
int stack_used_p = 0;
- int partial_len = (len < regsize ? len : regsize);
+ int partial_len = (len < MIPS64_REGSIZE ? len : MIPS64_REGSIZE);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
partial_len);
+ if (fp_register_arg_p (gdbarch, typecode, arg_type))
+ gdb_assert (argreg > MIPS_LAST_ARG_REGNUM (gdbarch));
+
/* Write this portion of the argument to the stack. */
- if (argreg > MIPS_LAST_ARG_REGNUM (gdbarch)
- || odd_sized_struct
- || fp_register_arg_p (gdbarch, typecode, arg_type))
+ if (argreg > MIPS_LAST_ARG_REGNUM (gdbarch))
{
/* Should shorter than int integer values be
promoted to int before being stored? */
stack_used_p = 1;
if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
{
- if (regsize == 8
- && (typecode == TYPE_CODE_INT
- || typecode == TYPE_CODE_PTR
- || typecode == TYPE_CODE_FLT) && len <= 4)
- longword_offset = regsize - len;
- else if ((typecode == TYPE_CODE_STRUCT
- || typecode == TYPE_CODE_UNION)
- && TYPE_LENGTH (arg_type) < regsize)
- longword_offset = regsize - len;
+ if ((typecode == TYPE_CODE_INT
+ || typecode == TYPE_CODE_PTR)
+ && len <= 4)
+ longword_offset = MIPS64_REGSIZE - len;
}
if (mips_debug)
}
/* Note!!! This is NOT an else clause. Odd sized
- structs may go thru BOTH paths. Floating point
- arguments will not. */
+ structs may go thru BOTH paths. */
/* Write this portion of the argument to a general
purpose register. */
- if (argreg <= MIPS_LAST_ARG_REGNUM (gdbarch)
- && !fp_register_arg_p (gdbarch, typecode, arg_type))
+ if (argreg <= MIPS_LAST_ARG_REGNUM (gdbarch))
{
- LONGEST regval =
- extract_signed_integer (val, partial_len, byte_order);
+ LONGEST regval;
+
+ /* Sign extend pointers, 32-bit integers and signed
+ 16-bit and 8-bit integers; everything else is taken
+ as is. */
+
+ if ((partial_len == 4
+ && (typecode == TYPE_CODE_PTR
+ || typecode == TYPE_CODE_INT))
+ || (partial_len < 4
+ && typecode == TYPE_CODE_INT
+ && !TYPE_UNSIGNED (arg_type)))
+ regval = extract_signed_integer (val, partial_len,
+ byte_order);
+ else
+ regval = extract_unsigned_integer (val, partial_len,
+ byte_order);
+
+ /* A non-floating-point argument being passed in a
+ general register. If a struct or union, and if
+ the remaining length is smaller than the register
+ size, we have to adjust the register value on
+ big endian targets.
+
+ It does not seem to be necessary to do the
+ same for integral types. */
+
+ if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG
+ && partial_len < MIPS64_REGSIZE
+ && (typecode == TYPE_CODE_STRUCT
+ || typecode == TYPE_CODE_UNION))
+ regval <<= ((MIPS64_REGSIZE - partial_len)
+ * TARGET_CHAR_BIT);
if (mips_debug)
fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
argreg,
- phex (regval, regsize));
- regcache_cooked_write_signed (regcache, argreg, regval);
+ phex (regval, MIPS64_REGSIZE));
+ regcache_cooked_write_unsigned (regcache, argreg, regval);
+
+ if (mips_n32n64_fp_arg_chunk_p (gdbarch, arg_type,
+ TYPE_LENGTH (arg_type) - len))
+ {
+ if (mips_debug)
+ fprintf_filtered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg,
+ phex (regval, MIPS64_REGSIZE));
+ regcache_cooked_write_unsigned (regcache, float_argreg,
+ regval);
+ }
+
+ float_argreg++;
argreg++;
}
/* Compute the offset into the stack at which we will
copy the next parameter.
- In the new EABI (and the NABI32), the stack_offset
- only needs to be adjusted when it has been used. */
+ In N32 (N64?), the stack_offset only needs to be
+ adjusted when it has been used. */
if (stack_used_p)
- stack_offset += align_up (partial_len, regsize);
+ stack_offset += align_up (partial_len, MIPS64_REGSIZE);
}
}
if (mips_debug)
return sp;
}
-/* Determine the return value convention being used. */
-
static enum return_value_convention
-mips_eabi_return_value (struct gdbarch *gdbarch, struct type *func_type,
- struct type *type, struct regcache *regcache,
- gdb_byte *readbuf, const gdb_byte *writebuf)
+mips_n32n64_return_value (struct gdbarch *gdbarch, struct value *function,
+ struct type *type, struct regcache *regcache,
+ gdb_byte *readbuf, const gdb_byte *writebuf)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
- int fp_return_type = 0;
- int offset, regnum, xfer;
- if (TYPE_LENGTH (type) > 2 * mips_abi_regsize (gdbarch))
- return RETURN_VALUE_STRUCT_CONVENTION;
+ /* From MIPSpro N32 ABI Handbook, Document Number: 007-2816-004
- /* Floating point type? */
- if (tdep->mips_fpu_type != MIPS_FPU_NONE)
+ Function results are returned in $2 (and $3 if needed), or $f0 (and $f2
+ if needed), as appropriate for the type. Composite results (struct,
+ union, or array) are returned in $2/$f0 and $3/$f2 according to the
+ following rules:
+
+ * A struct with only one or two floating point fields is returned in $f0
+ (and $f2 if necessary). This is a generalization of the Fortran COMPLEX
+ case.
+
+ * Any other composite results of at most 128 bits are returned in
+ $2 (first 64 bits) and $3 (remainder, if necessary).
+
+ * Larger composite results are handled by converting the function to a
+ procedure with an implicit first parameter, which is a pointer to an area
+ reserved by the caller to receive the result. [The o32-bit ABI requires
+ that all composite results be handled by conversion to implicit first
+ parameters. The MIPS/SGI Fortran implementation has always made a
+ specific exception to return COMPLEX results in the floating point
+ registers.] */
+
+ if (TYPE_LENGTH (type) > 2 * MIPS64_REGSIZE)
+ return RETURN_VALUE_STRUCT_CONVENTION;
+ else if (TYPE_CODE (type) == TYPE_CODE_FLT
+ && TYPE_LENGTH (type) == 16
+ && tdep->mips_fpu_type != MIPS_FPU_NONE)
{
- if (TYPE_CODE (type) == TYPE_CODE_FLT)
- fp_return_type = 1;
- /* Structs with a single field of float type
- are returned in a floating point register. */
- if ((TYPE_CODE (type) == TYPE_CODE_STRUCT
- || TYPE_CODE (type) == TYPE_CODE_UNION)
- && TYPE_NFIELDS (type) == 1)
+ /* A 128-bit floating-point value fills both $f0 and $f2. The
+ two registers are used in the same as memory order, so the
+ eight bytes with the lower memory address are in $f0. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float in $f0 and $f2\n");
+ mips_xfer_register (gdbarch, regcache,
+ (gdbarch_num_regs (gdbarch)
+ + mips_regnum (gdbarch)->fp0),
+ 8, gdbarch_byte_order (gdbarch),
+ readbuf, writebuf, 0);
+ mips_xfer_register (gdbarch, regcache,
+ (gdbarch_num_regs (gdbarch)
+ + mips_regnum (gdbarch)->fp0 + 2),
+ 8, gdbarch_byte_order (gdbarch),
+ readbuf ? readbuf + 8 : readbuf,
+ writebuf ? writebuf + 8 : writebuf, 0);
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+ else if (TYPE_CODE (type) == TYPE_CODE_FLT
+ && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ {
+ /* A single or double floating-point value that fits in FP0. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
+ mips_xfer_register (gdbarch, regcache,
+ (gdbarch_num_regs (gdbarch)
+ + mips_regnum (gdbarch)->fp0),
+ TYPE_LENGTH (type),
+ gdbarch_byte_order (gdbarch),
+ readbuf, writebuf, 0);
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+ else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ && TYPE_NFIELDS (type) <= 2
+ && TYPE_NFIELDS (type) >= 1
+ && ((TYPE_NFIELDS (type) == 1
+ && (TYPE_CODE (check_typedef (TYPE_FIELD_TYPE (type, 0)))
+ == TYPE_CODE_FLT))
+ || (TYPE_NFIELDS (type) == 2
+ && (TYPE_CODE (check_typedef (TYPE_FIELD_TYPE (type, 0)))
+ == TYPE_CODE_FLT)
+ && (TYPE_CODE (check_typedef (TYPE_FIELD_TYPE (type, 1)))
+ == TYPE_CODE_FLT))))
+ {
+ /* A struct that contains one or two floats. Each value is part
+ in the least significant part of their floating point
+ register (or GPR, for soft float). */
+ int regnum;
+ int field;
+ for (field = 0, regnum = (tdep->mips_fpu_type != MIPS_FPU_NONE
+ ? mips_regnum (gdbarch)->fp0
+ : MIPS_V0_REGNUM);
+ field < TYPE_NFIELDS (type); field++, regnum += 2)
{
- struct type *fieldtype = TYPE_FIELD_TYPE (type, 0);
-
- if (TYPE_CODE (check_typedef (fieldtype)) == TYPE_CODE_FLT)
- fp_return_type = 1;
+ int offset = (FIELD_BITPOS (TYPE_FIELDS (type)[field])
+ / TARGET_CHAR_BIT);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float struct+%d\n",
+ offset);
+ if (TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)) == 16)
+ {
+ /* A 16-byte long double field goes in two consecutive
+ registers. */
+ mips_xfer_register (gdbarch, regcache,
+ gdbarch_num_regs (gdbarch) + regnum,
+ 8,
+ gdbarch_byte_order (gdbarch),
+ readbuf, writebuf, offset);
+ mips_xfer_register (gdbarch, regcache,
+ gdbarch_num_regs (gdbarch) + regnum + 1,
+ 8,
+ gdbarch_byte_order (gdbarch),
+ readbuf, writebuf, offset + 8);
+ }
+ else
+ mips_xfer_register (gdbarch, regcache,
+ gdbarch_num_regs (gdbarch) + regnum,
+ TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)),
+ gdbarch_byte_order (gdbarch),
+ readbuf, writebuf, offset);
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+ else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (type) == TYPE_CODE_UNION
+ || TYPE_CODE (type) == TYPE_CODE_ARRAY)
+ {
+ /* A composite type. Extract the left justified value,
+ regardless of the byte order. I.e. DO NOT USE
+ mips_xfer_lower. */
+ int offset;
+ int regnum;
+ for (offset = 0, regnum = MIPS_V0_REGNUM;
+ offset < TYPE_LENGTH (type);
+ offset += register_size (gdbarch, regnum), regnum++)
+ {
+ int xfer = register_size (gdbarch, regnum);
+ if (offset + xfer > TYPE_LENGTH (type))
+ xfer = TYPE_LENGTH (type) - offset;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return struct+%d:%d in $%d\n",
+ offset, xfer, regnum);
+ mips_xfer_register (gdbarch, regcache,
+ gdbarch_num_regs (gdbarch) + regnum,
+ xfer, BFD_ENDIAN_UNKNOWN, readbuf, writebuf,
+ offset);
}
+ return RETURN_VALUE_REGISTER_CONVENTION;
}
-
- if (fp_return_type)
- {
- /* A floating-point value belongs in the least significant part
- of FP0/FP1. */
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
- regnum = mips_regnum (gdbarch)->fp0;
- }
- else
- {
- /* An integer value goes in V0/V1. */
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return scalar in $v0\n");
- regnum = MIPS_V0_REGNUM;
- }
- for (offset = 0;
- offset < TYPE_LENGTH (type);
- offset += mips_abi_regsize (gdbarch), regnum++)
+ else
{
- xfer = mips_abi_regsize (gdbarch);
- if (offset + xfer > TYPE_LENGTH (type))
- xfer = TYPE_LENGTH (type) - offset;
- mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch) + regnum, xfer,
- gdbarch_byte_order (gdbarch), readbuf, writebuf,
- offset);
+ /* A scalar extract each part but least-significant-byte
+ justified. */
+ int offset;
+ int regnum;
+ for (offset = 0, regnum = MIPS_V0_REGNUM;
+ offset < TYPE_LENGTH (type);
+ offset += register_size (gdbarch, regnum), regnum++)
+ {
+ int xfer = register_size (gdbarch, regnum);
+ if (offset + xfer > TYPE_LENGTH (type))
+ xfer = TYPE_LENGTH (type) - offset;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return scalar+%d:%d in $%d\n",
+ offset, xfer, regnum);
+ mips_xfer_register (gdbarch, regcache,
+ gdbarch_num_regs (gdbarch) + regnum,
+ xfer, gdbarch_byte_order (gdbarch),
+ readbuf, writebuf, offset);
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
}
-
- return RETURN_VALUE_REGISTER_CONVENTION;
}
+/* Which registers to use for passing floating-point values between
+ function calls, one of floating-point, general and both kinds of
+ registers. O32 and O64 use different register kinds for standard
+ MIPS and MIPS16 code; to make the handling of cases where we may
+ not know what kind of code is being used (e.g. no debug information)
+ easier we sometimes use both kinds. */
-/* N32/N64 ABI stuff. */
-
-/* Search for a naturally aligned double at OFFSET inside a struct
- ARG_TYPE. The N32 / N64 ABIs pass these in floating point
- registers. */
-
-static int
-mips_n32n64_fp_arg_chunk_p (struct gdbarch *gdbarch, struct type *arg_type,
- int offset)
+enum mips_fval_reg
{
- int i;
-
- if (TYPE_CODE (arg_type) != TYPE_CODE_STRUCT)
- return 0;
-
- if (MIPS_FPU_TYPE (gdbarch) != MIPS_FPU_DOUBLE)
- return 0;
-
- if (TYPE_LENGTH (arg_type) < offset + MIPS64_REGSIZE)
- return 0;
-
- for (i = 0; i < TYPE_NFIELDS (arg_type); i++)
- {
- int pos;
- struct type *field_type;
-
- /* We're only looking at normal fields. */
- if (field_is_static (&TYPE_FIELD (arg_type, i))
- || (TYPE_FIELD_BITPOS (arg_type, i) % 8) != 0)
- continue;
-
- /* If we have gone past the offset, there is no double to pass. */
- pos = TYPE_FIELD_BITPOS (arg_type, i) / 8;
- if (pos > offset)
- return 0;
-
- field_type = check_typedef (TYPE_FIELD_TYPE (arg_type, i));
-
- /* If this field is entirely before the requested offset, go
- on to the next one. */
- if (pos + TYPE_LENGTH (field_type) <= offset)
- continue;
-
- /* If this is our special aligned double, we can stop. */
- if (TYPE_CODE (field_type) == TYPE_CODE_FLT
- && TYPE_LENGTH (field_type) == MIPS64_REGSIZE)
- return 1;
-
- /* This field starts at or before the requested offset, and
- overlaps it. If it is a structure, recurse inwards. */
- return mips_n32n64_fp_arg_chunk_p (gdbarch, field_type, offset - pos);
- }
+ mips_fval_fpr,
+ mips_fval_gpr,
+ mips_fval_both
+};
- return 0;
-}
+/* O32 ABI stuff. */
static CORE_ADDR
-mips_n32n64_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
- struct regcache *regcache, CORE_ADDR bp_addr,
- int nargs, struct value **args, CORE_ADDR sp,
- int struct_return, CORE_ADDR struct_addr)
+mips_o32_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
+ struct regcache *regcache, CORE_ADDR bp_addr,
+ int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
{
int argreg;
int float_argreg;
int argnum;
int len = 0;
int stack_offset = 0;
- struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
CORE_ADDR func_addr = find_function_addr (function, NULL);
/* Now make space on the stack for the args. */
for (argnum = 0; argnum < nargs; argnum++)
- len += align_up (TYPE_LENGTH (value_type (args[argnum])), MIPS64_REGSIZE);
+ {
+ struct type *arg_type = check_typedef (value_type (args[argnum]));
+
+ /* Align to double-word if necessary. */
+ if (mips_type_needs_double_align (arg_type))
+ len = align_up (len, MIPS32_REGSIZE * 2);
+ /* Allocate space on the stack. */
+ len += align_up (TYPE_LENGTH (arg_type), MIPS32_REGSIZE);
+ }
sp -= align_up (len, 16);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_n32n64_push_dummy_call: sp=%s allocated %ld\n",
+ "mips_o32_push_dummy_call: sp=%s allocated %ld\n",
paddress (gdbarch, sp), (long) align_up (len, 16));
/* Initialize the integer and float register pointers. */
{
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_n32n64_push_dummy_call: "
+ "mips_o32_push_dummy_call: "
"struct_return reg=%d %s\n",
argreg, paddress (gdbarch, struct_addr));
regcache_cooked_write_unsigned (regcache, argreg++, struct_addr);
+ stack_offset += MIPS32_REGSIZE;
}
/* Now load as many as possible of the first arguments into
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_n32n64_push_dummy_call: %d len=%d type=%d",
+ "mips_o32_push_dummy_call: %d len=%d type=%d",
argnum + 1, len, (int) typecode);
val = value_contents (arg);
- /* A 128-bit long double value requires an even-odd pair of
- floating-point registers. */
- if (len == 16
- && fp_register_arg_p (gdbarch, typecode, arg_type)
- && (float_argreg & 1))
+ /* 32-bit ABIs always start floating point arguments in an
+ even-numbered floating point register. Round the FP register
+ up before the check to see if there are any FP registers
+ left. O32 targets also pass the FP in the integer registers
+ so also round up normal registers. */
+ if (fp_register_arg_p (gdbarch, typecode, arg_type))
{
- float_argreg++;
- argreg++;
+ if ((float_argreg & 1))
+ float_argreg++;
}
+ /* Floating point arguments passed in registers have to be
+ treated specially. On 32-bit architectures, doubles are
+ passed in register pairs; the even FP register gets the
+ low word, and the odd FP register gets the high word.
+ On O32, the first two floating point arguments are also
+ copied to general registers, following their memory order,
+ because MIPS16 functions don't use float registers for
+ arguments. This duplication of arguments in general
+ registers can't hurt non-MIPS16 functions, because those
+ registers are normally skipped. */
+
if (fp_register_arg_p (gdbarch, typecode, arg_type)
- && argreg <= MIPS_LAST_ARG_REGNUM (gdbarch))
+ && float_argreg <= MIPS_LAST_FP_ARG_REGNUM (gdbarch))
{
- /* This is a floating point value that fits entirely
- in a single register or a pair of registers. */
- int reglen = (len <= MIPS64_REGSIZE ? len : MIPS64_REGSIZE);
- LONGEST regval = extract_unsigned_integer (val, reglen, byte_order);
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
- float_argreg, phex (regval, reglen));
- regcache_cooked_write_unsigned (regcache, float_argreg, regval);
-
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
- argreg, phex (regval, reglen));
- regcache_cooked_write_unsigned (regcache, argreg, regval);
- float_argreg++;
- argreg++;
- if (len == 16)
+ if (register_size (gdbarch, float_argreg) < 8 && len == 8)
{
- regval = extract_unsigned_integer (val + reglen,
- reglen, byte_order);
+ int freg_offset = gdbarch_byte_order (gdbarch)
+ == BFD_ENDIAN_BIG ? 1 : 0;
+ unsigned long regval;
+
+ /* First word. */
+ regval = extract_unsigned_integer (val, 4, byte_order);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
- float_argreg, phex (regval, reglen));
- regcache_cooked_write_unsigned (regcache, float_argreg, regval);
+ float_argreg + freg_offset,
+ phex (regval, 4));
+ regcache_cooked_write_unsigned (regcache,
+ float_argreg++ + freg_offset,
+ regval);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
+ argreg, phex (regval, 4));
+ regcache_cooked_write_unsigned (regcache, argreg++, regval);
+ /* Second word. */
+ regval = extract_unsigned_integer (val + 4, 4, byte_order);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg - freg_offset,
+ phex (regval, 4));
+ regcache_cooked_write_unsigned (regcache,
+ float_argreg++ - freg_offset,
+ regval);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
- argreg, phex (regval, reglen));
- regcache_cooked_write_unsigned (regcache, argreg, regval);
- float_argreg++;
- argreg++;
+ argreg, phex (regval, 4));
+ regcache_cooked_write_unsigned (regcache, argreg++, regval);
+ }
+ else
+ {
+ /* This is a floating point value that fits entirely
+ in a single register. */
+ /* On 32 bit ABI's the float_argreg is further adjusted
+ above to ensure that it is even register aligned. */
+ LONGEST regval = extract_unsigned_integer (val, len, byte_order);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg, phex (regval, len));
+ regcache_cooked_write_unsigned (regcache,
+ float_argreg++, regval);
+ /* Although two FP registers are reserved for each
+ argument, only one corresponding integer register is
+ reserved. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
+ argreg, phex (regval, len));
+ regcache_cooked_write_unsigned (regcache, argreg++, regval);
}
+ /* Reserve space for the FP register. */
+ stack_offset += align_up (len, MIPS32_REGSIZE);
}
else
{
/* Copy the argument to general registers or the stack in
register-sized pieces. Large arguments are split between
registers and stack. */
- /* For N32/N64, structs, unions, or other composite types are
- treated as a sequence of doublewords, and are passed in integer
- or floating point registers as though they were simple scalar
- parameters to the extent that they fit, with any excess on the
- stack packed according to the normal memory layout of the
- object.
- The caller does not reserve space for the register arguments;
- the callee is responsible for reserving it if required. */
- /* Note: Floating-point values that didn't fit into an FP
- register are only written to memory. */
+ /* Note: structs whose size is not a multiple of MIPS32_REGSIZE
+ are treated specially: Irix cc passes
+ them in registers where gcc sometimes puts them on the
+ stack. For maximum compatibility, we will put them in
+ both places. */
+ int odd_sized_struct = (len > MIPS32_REGSIZE
+ && len % MIPS32_REGSIZE != 0);
+ /* Structures should be aligned to eight bytes (even arg registers)
+ on MIPS_ABI_O32, if their first member has double precision. */
+ if (mips_type_needs_double_align (arg_type))
+ {
+ if ((argreg & 1))
+ {
+ argreg++;
+ stack_offset += MIPS32_REGSIZE;
+ }
+ }
while (len > 0)
{
/* Remember if the argument was written to the stack. */
int stack_used_p = 0;
- int partial_len = (len < MIPS64_REGSIZE ? len : MIPS64_REGSIZE);
+ int partial_len = (len < MIPS32_REGSIZE ? len : MIPS32_REGSIZE);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
partial_len);
- if (fp_register_arg_p (gdbarch, typecode, arg_type))
- gdb_assert (argreg > MIPS_LAST_ARG_REGNUM (gdbarch));
-
/* Write this portion of the argument to the stack. */
- if (argreg > MIPS_LAST_ARG_REGNUM (gdbarch))
+ if (argreg > MIPS_LAST_ARG_REGNUM (gdbarch)
+ || odd_sized_struct)
{
/* Should shorter than int integer values be
promoted to int before being stored? */
int longword_offset = 0;
CORE_ADDR addr;
- stack_used_p = 1;
- if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
- {
- if ((typecode == TYPE_CODE_INT
- || typecode == TYPE_CODE_PTR)
- && len <= 4)
- longword_offset = MIPS64_REGSIZE - len;
- }
+ stack_used_p = 1;
if (mips_debug)
{
purpose register. */
if (argreg <= MIPS_LAST_ARG_REGNUM (gdbarch))
{
- LONGEST regval;
-
- /* Sign extend pointers, 32-bit integers and signed
- 16-bit and 8-bit integers; everything else is taken
- as is. */
-
- if ((partial_len == 4
- && (typecode == TYPE_CODE_PTR
- || typecode == TYPE_CODE_INT))
- || (partial_len < 4
- && typecode == TYPE_CODE_INT
- && !TYPE_UNSIGNED (arg_type)))
- regval = extract_signed_integer (val, partial_len,
- byte_order);
- else
- regval = extract_unsigned_integer (val, partial_len,
- byte_order);
+ LONGEST regval = extract_signed_integer (val, partial_len,
+ byte_order);
+ /* Value may need to be sign extended, because
+ mips_isa_regsize() != mips_abi_regsize(). */
/* A non-floating-point argument being passed in a
general register. If a struct or union, and if
big endian targets.
It does not seem to be necessary to do the
- same for integral types. */
+ same for integral types.
+
+ Also don't do this adjustment on O64 binaries.
+
+ cagney/2001-07-23: gdb/179: Also, GCC, when
+ outputting LE O32 with sizeof (struct) <
+ mips_abi_regsize(), generates a left shift
+ as part of storing the argument in a register
+ (the left shift isn't generated when
+ sizeof (struct) >= mips_abi_regsize()). Since
+ it is quite possible that this is GCC
+ contradicting the LE/O32 ABI, GDB has not been
+ adjusted to accommodate this. Either someone
+ needs to demonstrate that the LE/O32 ABI
+ specifies such a left shift OR this new ABI gets
+ identified as such and GDB gets tweaked
+ accordingly. */
if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG
- && partial_len < MIPS64_REGSIZE
+ && partial_len < MIPS32_REGSIZE
&& (typecode == TYPE_CODE_STRUCT
|| typecode == TYPE_CODE_UNION))
- regval <<= ((MIPS64_REGSIZE - partial_len)
+ regval <<= ((MIPS32_REGSIZE - partial_len)
* TARGET_CHAR_BIT);
if (mips_debug)
fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
argreg,
- phex (regval, MIPS64_REGSIZE));
+ phex (regval, MIPS32_REGSIZE));
regcache_cooked_write_unsigned (regcache, argreg, regval);
-
- if (mips_n32n64_fp_arg_chunk_p (gdbarch, arg_type,
- TYPE_LENGTH (arg_type) - len))
- {
- if (mips_debug)
- fprintf_filtered (gdb_stdlog, " - fpreg=%d val=%s",
- float_argreg,
- phex (regval, MIPS64_REGSIZE));
- regcache_cooked_write_unsigned (regcache, float_argreg,
- regval);
- }
-
- float_argreg++;
argreg++;
+
+ /* Prevent subsequent floating point arguments from
+ being passed in floating point registers. */
+ float_argreg = MIPS_LAST_FP_ARG_REGNUM (gdbarch) + 1;
}
len -= partial_len;
/* Compute the offset into the stack at which we will
copy the next parameter.
- In N32 (N64?), the stack_offset only needs to be
- adjusted when it has been used. */
+ In older ABIs, the caller reserved space for
+ registers that contained arguments. This was loosely
+ refered to as their "home". Consequently, space is
+ always allocated. */
- if (stack_used_p)
- stack_offset += align_up (partial_len, MIPS64_REGSIZE);
+ stack_offset += align_up (partial_len, MIPS32_REGSIZE);
}
}
if (mips_debug)
}
static enum return_value_convention
-mips_n32n64_return_value (struct gdbarch *gdbarch, struct type *func_type,
- struct type *type, struct regcache *regcache,
- gdb_byte *readbuf, const gdb_byte *writebuf)
+mips_o32_return_value (struct gdbarch *gdbarch, struct value *function,
+ struct type *type, struct regcache *regcache,
+ gdb_byte *readbuf, const gdb_byte *writebuf)
{
+ CORE_ADDR func_addr = function ? find_function_addr (function, NULL) : 0;
+ int mips16 = mips_pc_is_mips16 (gdbarch, func_addr);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ enum mips_fval_reg fval_reg;
- /* From MIPSpro N32 ABI Handbook, Document Number: 007-2816-004
-
- Function results are returned in $2 (and $3 if needed), or $f0 (and $f2
- if needed), as appropriate for the type. Composite results (struct,
- union, or array) are returned in $2/$f0 and $3/$f2 according to the
- following rules:
-
- * A struct with only one or two floating point fields is returned in $f0
- (and $f2 if necessary). This is a generalization of the Fortran COMPLEX
- case.
-
- * Any other composite results of at most 128 bits are returned in
- $2 (first 64 bits) and $3 (remainder, if necessary).
-
- * Larger composite results are handled by converting the function to a
- procedure with an implicit first parameter, which is a pointer to an area
- reserved by the caller to receive the result. [The o32-bit ABI requires
- that all composite results be handled by conversion to implicit first
- parameters. The MIPS/SGI Fortran implementation has always made a
- specific exception to return COMPLEX results in the floating point
- registers.] */
-
- if (TYPE_LENGTH (type) > 2 * MIPS64_REGSIZE)
+ fval_reg = readbuf ? mips16 ? mips_fval_gpr : mips_fval_fpr : mips_fval_both;
+ if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (type) == TYPE_CODE_UNION
+ || TYPE_CODE (type) == TYPE_CODE_ARRAY)
return RETURN_VALUE_STRUCT_CONVENTION;
else if (TYPE_CODE (type) == TYPE_CODE_FLT
- && TYPE_LENGTH (type) == 16
- && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ && TYPE_LENGTH (type) == 4 && tdep->mips_fpu_type != MIPS_FPU_NONE)
{
- /* A 128-bit floating-point value fills both $f0 and $f2. The
- two registers are used in the same as memory order, so the
- eight bytes with the lower memory address are in $f0. */
+ /* A single-precision floating-point value. If reading in or copying,
+ then we get it from/put it to FP0 for standard MIPS code or GPR2
+ for MIPS16 code. If writing out only, then we put it to both FP0
+ and GPR2. We do not support reading in with no function known, if
+ this safety check ever triggers, then we'll have to try harder. */
+ gdb_assert (function || !readbuf);
if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return float in $f0 and $f2\n");
- mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch)
- + mips_regnum (gdbarch)->fp0,
- 8, gdbarch_byte_order (gdbarch),
- readbuf, writebuf, 0);
- mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch)
- + mips_regnum (gdbarch)->fp0 + 2,
- 8, gdbarch_byte_order (gdbarch),
- readbuf ? readbuf + 8 : readbuf,
- writebuf ? writebuf + 8 : writebuf, 0);
+ switch (fval_reg)
+ {
+ case mips_fval_fpr:
+ fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
+ break;
+ case mips_fval_gpr:
+ fprintf_unfiltered (gdb_stderr, "Return float in $2\n");
+ break;
+ case mips_fval_both:
+ fprintf_unfiltered (gdb_stderr, "Return float in $fp0 and $2\n");
+ break;
+ }
+ if (fval_reg != mips_fval_gpr)
+ mips_xfer_register (gdbarch, regcache,
+ (gdbarch_num_regs (gdbarch)
+ + mips_regnum (gdbarch)->fp0),
+ TYPE_LENGTH (type),
+ gdbarch_byte_order (gdbarch),
+ readbuf, writebuf, 0);
+ if (fval_reg != mips_fval_fpr)
+ mips_xfer_register (gdbarch, regcache,
+ gdbarch_num_regs (gdbarch) + 2,
+ TYPE_LENGTH (type),
+ gdbarch_byte_order (gdbarch),
+ readbuf, writebuf, 0);
return RETURN_VALUE_REGISTER_CONVENTION;
}
else if (TYPE_CODE (type) == TYPE_CODE_FLT
- && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ && TYPE_LENGTH (type) == 8 && tdep->mips_fpu_type != MIPS_FPU_NONE)
{
- /* A single or double floating-point value that fits in FP0. */
+ /* A double-precision floating-point value. If reading in or copying,
+ then we get it from/put it to FP1 and FP0 for standard MIPS code or
+ GPR2 and GPR3 for MIPS16 code. If writing out only, then we put it
+ to both FP1/FP0 and GPR2/GPR3. We do not support reading in with
+ no function known, if this safety check ever triggers, then we'll
+ have to try harder. */
+ gdb_assert (function || !readbuf);
if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
- mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch)
- + mips_regnum (gdbarch)->fp0,
- TYPE_LENGTH (type),
- gdbarch_byte_order (gdbarch),
- readbuf, writebuf, 0);
+ switch (fval_reg)
+ {
+ case mips_fval_fpr:
+ fprintf_unfiltered (gdb_stderr, "Return float in $fp1/$fp0\n");
+ break;
+ case mips_fval_gpr:
+ fprintf_unfiltered (gdb_stderr, "Return float in $2/$3\n");
+ break;
+ case mips_fval_both:
+ fprintf_unfiltered (gdb_stderr,
+ "Return float in $fp1/$fp0 and $2/$3\n");
+ break;
+ }
+ if (fval_reg != mips_fval_gpr)
+ {
+ /* The most significant part goes in FP1, and the least significant
+ in FP0. */
+ switch (gdbarch_byte_order (gdbarch))
+ {
+ case BFD_ENDIAN_LITTLE:
+ mips_xfer_register (gdbarch, regcache,
+ (gdbarch_num_regs (gdbarch)
+ + mips_regnum (gdbarch)->fp0 + 0),
+ 4, gdbarch_byte_order (gdbarch),
+ readbuf, writebuf, 0);
+ mips_xfer_register (gdbarch, regcache,
+ (gdbarch_num_regs (gdbarch)
+ + mips_regnum (gdbarch)->fp0 + 1),
+ 4, gdbarch_byte_order (gdbarch),
+ readbuf, writebuf, 4);
+ break;
+ case BFD_ENDIAN_BIG:
+ mips_xfer_register (gdbarch, regcache,
+ (gdbarch_num_regs (gdbarch)
+ + mips_regnum (gdbarch)->fp0 + 1),
+ 4, gdbarch_byte_order (gdbarch),
+ readbuf, writebuf, 0);
+ mips_xfer_register (gdbarch, regcache,
+ (gdbarch_num_regs (gdbarch)
+ + mips_regnum (gdbarch)->fp0 + 0),
+ 4, gdbarch_byte_order (gdbarch),
+ readbuf, writebuf, 4);
+ break;
+ default:
+ internal_error (__FILE__, __LINE__, _("bad switch"));
+ }
+ }
+ if (fval_reg != mips_fval_fpr)
+ {
+ /* The two 32-bit parts are always placed in GPR2 and GPR3
+ following these registers' memory order. */
+ mips_xfer_register (gdbarch, regcache,
+ gdbarch_num_regs (gdbarch) + 2,
+ 4, gdbarch_byte_order (gdbarch),
+ readbuf, writebuf, 0);
+ mips_xfer_register (gdbarch, regcache,
+ gdbarch_num_regs (gdbarch) + 3,
+ 4, gdbarch_byte_order (gdbarch),
+ readbuf, writebuf, 4);
+ }
return RETURN_VALUE_REGISTER_CONVENTION;
}
+#if 0
else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
&& TYPE_NFIELDS (type) <= 2
&& TYPE_NFIELDS (type) >= 1
&& ((TYPE_NFIELDS (type) == 1
- && (TYPE_CODE (check_typedef (TYPE_FIELD_TYPE (type, 0)))
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
== TYPE_CODE_FLT))
|| (TYPE_NFIELDS (type) == 2
- && (TYPE_CODE (check_typedef (TYPE_FIELD_TYPE (type, 0)))
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
== TYPE_CODE_FLT)
- && (TYPE_CODE (check_typedef (TYPE_FIELD_TYPE (type, 1)))
- == TYPE_CODE_FLT))))
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 1))
+ == TYPE_CODE_FLT)))
+ && tdep->mips_fpu_type != MIPS_FPU_NONE)
{
/* A struct that contains one or two floats. Each value is part
in the least significant part of their floating point
- register (or GPR, for soft float). */
+ register.. */
+ gdb_byte reg[MAX_REGISTER_SIZE];
int regnum;
int field;
- for (field = 0, regnum = (tdep->mips_fpu_type != MIPS_FPU_NONE
- ? mips_regnum (gdbarch)->fp0
- : MIPS_V0_REGNUM);
+ for (field = 0, regnum = mips_regnum (gdbarch)->fp0;
field < TYPE_NFIELDS (type); field++, regnum += 2)
{
int offset = (FIELD_BITPOS (TYPE_FIELDS (type)[field])
if (mips_debug)
fprintf_unfiltered (gdb_stderr, "Return float struct+%d\n",
offset);
- if (TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)) == 16)
- {
- /* A 16-byte long double field goes in two consecutive
- registers. */
- mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch) + regnum,
- 8,
- gdbarch_byte_order (gdbarch),
- readbuf, writebuf, offset);
- mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch) + regnum + 1,
- 8,
- gdbarch_byte_order (gdbarch),
- readbuf, writebuf, offset + 8);
- }
- else
- mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch) + regnum,
- TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)),
- gdbarch_byte_order (gdbarch),
- readbuf, writebuf, offset);
+ mips_xfer_register (gdbarch, regcache,
+ gdbarch_num_regs (gdbarch) + regnum,
+ TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)),
+ gdbarch_byte_order (gdbarch),
+ readbuf, writebuf, offset);
}
return RETURN_VALUE_REGISTER_CONVENTION;
}
+#endif
+#if 0
else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
- || TYPE_CODE (type) == TYPE_CODE_UNION
- || TYPE_CODE (type) == TYPE_CODE_ARRAY)
+ || TYPE_CODE (type) == TYPE_CODE_UNION)
{
- /* A composite type. Extract the left justified value,
+ /* A structure or union. Extract the left justified value,
regardless of the byte order. I.e. DO NOT USE
mips_xfer_lower. */
int offset;
fprintf_unfiltered (gdb_stderr, "Return struct+%d:%d in $%d\n",
offset, xfer, regnum);
mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch) + regnum,
- xfer, BFD_ENDIAN_UNKNOWN, readbuf, writebuf,
- offset);
+ gdbarch_num_regs (gdbarch) + regnum, xfer,
+ BFD_ENDIAN_UNKNOWN, readbuf, writebuf, offset);
}
return RETURN_VALUE_REGISTER_CONVENTION;
}
+#endif
else
{
/* A scalar extract each part but least-significant-byte
- justified. */
+ justified. o32 thinks registers are 4 byte, regardless of
+ the ISA. */
int offset;
int regnum;
for (offset = 0, regnum = MIPS_V0_REGNUM;
offset < TYPE_LENGTH (type);
- offset += register_size (gdbarch, regnum), regnum++)
+ offset += MIPS32_REGSIZE, regnum++)
{
- int xfer = register_size (gdbarch, regnum);
+ int xfer = MIPS32_REGSIZE;
if (offset + xfer > TYPE_LENGTH (type))
xfer = TYPE_LENGTH (type) - offset;
if (mips_debug)
fprintf_unfiltered (gdb_stderr, "Return scalar+%d:%d in $%d\n",
offset, xfer, regnum);
mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch) + regnum,
- xfer, gdbarch_byte_order (gdbarch),
+ gdbarch_num_regs (gdbarch) + regnum, xfer,
+ gdbarch_byte_order (gdbarch),
readbuf, writebuf, offset);
}
return RETURN_VALUE_REGISTER_CONVENTION;
}
}
-/* O32 ABI stuff. */
+/* O64 ABI. This is a hacked up kind of 64-bit version of the o32
+ ABI. */
static CORE_ADDR
-mips_o32_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
+mips_o64_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
struct regcache *regcache, CORE_ADDR bp_addr,
- int nargs, struct value **args, CORE_ADDR sp,
+ int nargs,
+ struct value **args, CORE_ADDR sp,
int struct_return, CORE_ADDR struct_addr)
{
int argreg;
int argnum;
int len = 0;
int stack_offset = 0;
- struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
CORE_ADDR func_addr = find_function_addr (function, NULL);
for (argnum = 0; argnum < nargs; argnum++)
{
struct type *arg_type = check_typedef (value_type (args[argnum]));
- int arglen = TYPE_LENGTH (arg_type);
- /* Align to double-word if necessary. */
- if (mips_type_needs_double_align (arg_type))
- len = align_up (len, MIPS32_REGSIZE * 2);
/* Allocate space on the stack. */
- len += align_up (arglen, MIPS32_REGSIZE);
+ len += align_up (TYPE_LENGTH (arg_type), MIPS64_REGSIZE);
}
sp -= align_up (len, 16);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_o32_push_dummy_call: sp=%s allocated %ld\n",
+ "mips_o64_push_dummy_call: sp=%s allocated %ld\n",
paddress (gdbarch, sp), (long) align_up (len, 16));
/* Initialize the integer and float register pointers. */
{
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_o32_push_dummy_call: "
+ "mips_o64_push_dummy_call: "
"struct_return reg=%d %s\n",
argreg, paddress (gdbarch, struct_addr));
regcache_cooked_write_unsigned (regcache, argreg++, struct_addr);
- stack_offset += MIPS32_REGSIZE;
+ stack_offset += MIPS64_REGSIZE;
}
/* Now load as many as possible of the first arguments into
struct value *arg = args[argnum];
struct type *arg_type = check_typedef (value_type (arg));
int len = TYPE_LENGTH (arg_type);
- enum type_code typecode = TYPE_CODE (arg_type);
-
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog,
- "mips_o32_push_dummy_call: %d len=%d type=%d",
- argnum + 1, len, (int) typecode);
-
- val = value_contents (arg);
-
- /* 32-bit ABIs always start floating point arguments in an
- even-numbered floating point register. Round the FP register
- up before the check to see if there are any FP registers
- left. O32/O64 targets also pass the FP in the integer
- registers so also round up normal registers. */
- if (fp_register_arg_p (gdbarch, typecode, arg_type))
- {
- if ((float_argreg & 1))
- float_argreg++;
- }
+ enum type_code typecode = TYPE_CODE (arg_type);
+
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_o64_push_dummy_call: %d len=%d type=%d",
+ argnum + 1, len, (int) typecode);
+
+ val = value_contents (arg);
/* Floating point arguments passed in registers have to be
- treated specially. On 32-bit architectures, doubles
- are passed in register pairs; the even register gets
- the low word, and the odd register gets the high word.
- On O32/O64, the first two floating point arguments are
- also copied to general registers, because MIPS16 functions
- don't use float registers for arguments. This duplication of
- arguments in general registers can't hurt non-MIPS16 functions
- because those registers are normally skipped. */
+ treated specially. On 32-bit architectures, doubles are
+ passed in register pairs; the even FP register gets the
+ low word, and the odd FP register gets the high word.
+ On O64, the first two floating point arguments are also
+ copied to general registers, because MIPS16 functions
+ don't use float registers for arguments. This duplication
+ of arguments in general registers can't hurt non-MIPS16
+ functions because those registers are normally skipped. */
if (fp_register_arg_p (gdbarch, typecode, arg_type)
&& float_argreg <= MIPS_LAST_FP_ARG_REGNUM (gdbarch))
{
- if (register_size (gdbarch, float_argreg) < 8 && len == 8)
- {
- int low_offset = gdbarch_byte_order (gdbarch)
- == BFD_ENDIAN_BIG ? 4 : 0;
- unsigned long regval;
-
- /* Write the low word of the double to the even register(s). */
- regval = extract_unsigned_integer (val + low_offset,
- 4, byte_order);
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
- float_argreg, phex (regval, 4));
- regcache_cooked_write_unsigned (regcache,
- float_argreg++, regval);
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
- argreg, phex (regval, 4));
- regcache_cooked_write_unsigned (regcache, argreg++, regval);
-
- /* Write the high word of the double to the odd register(s). */
- regval = extract_unsigned_integer (val + 4 - low_offset,
- 4, byte_order);
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
- float_argreg, phex (regval, 4));
- regcache_cooked_write_unsigned (regcache,
- float_argreg++, regval);
-
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
- argreg, phex (regval, 4));
- regcache_cooked_write_unsigned (regcache, argreg++, regval);
- }
- else
- {
- /* This is a floating point value that fits entirely
- in a single register. */
- /* On 32 bit ABI's the float_argreg is further adjusted
- above to ensure that it is even register aligned. */
- LONGEST regval = extract_unsigned_integer (val, len, byte_order);
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
- float_argreg, phex (regval, len));
- regcache_cooked_write_unsigned (regcache,
- float_argreg++, regval);
- /* Although two FP registers are reserved for each
- argument, only one corresponding integer register is
- reserved. */
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
- argreg, phex (regval, len));
- regcache_cooked_write_unsigned (regcache, argreg++, regval);
- }
+ LONGEST regval = extract_unsigned_integer (val, len, byte_order);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg, phex (regval, len));
+ regcache_cooked_write_unsigned (regcache, float_argreg++, regval);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
+ argreg, phex (regval, len));
+ regcache_cooked_write_unsigned (regcache, argreg, regval);
+ argreg++;
/* Reserve space for the FP register. */
- stack_offset += align_up (len, MIPS32_REGSIZE);
+ stack_offset += align_up (len, MIPS64_REGSIZE);
}
else
{
/* Copy the argument to general registers or the stack in
register-sized pieces. Large arguments are split between
registers and stack. */
- /* Note: structs whose size is not a multiple of MIPS32_REGSIZE
- are treated specially: Irix cc passes
- them in registers where gcc sometimes puts them on the
- stack. For maximum compatibility, we will put them in
- both places. */
- int odd_sized_struct = (len > MIPS32_REGSIZE
- && len % MIPS32_REGSIZE != 0);
- /* Structures should be aligned to eight bytes (even arg registers)
- on MIPS_ABI_O32, if their first member has double precision. */
- if (mips_type_needs_double_align (arg_type))
- {
- if ((argreg & 1))
- {
- argreg++;
- stack_offset += MIPS32_REGSIZE;
- }
- }
+ /* Note: structs whose size is not a multiple of MIPS64_REGSIZE
+ are treated specially: Irix cc passes them in registers
+ where gcc sometimes puts them on the stack. For maximum
+ compatibility, we will put them in both places. */
+ int odd_sized_struct = (len > MIPS64_REGSIZE
+ && len % MIPS64_REGSIZE != 0);
while (len > 0)
{
/* Remember if the argument was written to the stack. */
int stack_used_p = 0;
- int partial_len = (len < MIPS32_REGSIZE ? len : MIPS32_REGSIZE);
+ int partial_len = (len < MIPS64_REGSIZE ? len : MIPS64_REGSIZE);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
int longword_offset = 0;
CORE_ADDR addr;
stack_used_p = 1;
+ if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
+ {
+ if ((typecode == TYPE_CODE_INT
+ || typecode == TYPE_CODE_PTR
+ || typecode == TYPE_CODE_FLT)
+ && len <= 4)
+ longword_offset = MIPS64_REGSIZE - len;
+ }
if (mips_debug)
{
{
LONGEST regval = extract_signed_integer (val, partial_len,
byte_order);
- /* Value may need to be sign extended, because
- mips_isa_regsize() != mips_abi_regsize(). */
-
- /* A non-floating-point argument being passed in a
- general register. If a struct or union, and if
- the remaining length is smaller than the register
- size, we have to adjust the register value on
- big endian targets.
-
- It does not seem to be necessary to do the
- same for integral types.
-
- Also don't do this adjustment on O64 binaries.
-
- cagney/2001-07-23: gdb/179: Also, GCC, when
- outputting LE O32 with sizeof (struct) <
- mips_abi_regsize(), generates a left shift
- as part of storing the argument in a register
- (the left shift isn't generated when
- sizeof (struct) >= mips_abi_regsize()). Since
- it is quite possible that this is GCC
- contradicting the LE/O32 ABI, GDB has not been
- adjusted to accommodate this. Either someone
- needs to demonstrate that the LE/O32 ABI
- specifies such a left shift OR this new ABI gets
- identified as such and GDB gets tweaked
- accordingly. */
-
- if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG
- && partial_len < MIPS32_REGSIZE
- && (typecode == TYPE_CODE_STRUCT
- || typecode == TYPE_CODE_UNION))
- regval <<= ((MIPS32_REGSIZE - partial_len)
- * TARGET_CHAR_BIT);
-
- if (mips_debug)
- fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
- argreg,
- phex (regval, MIPS32_REGSIZE));
- regcache_cooked_write_unsigned (regcache, argreg, regval);
- argreg++;
-
- /* Prevent subsequent floating point arguments from
- being passed in floating point registers. */
- float_argreg = MIPS_LAST_FP_ARG_REGNUM (gdbarch) + 1;
- }
-
- len -= partial_len;
- val += partial_len;
-
- /* Compute the offset into the stack at which we will
- copy the next parameter.
-
- In older ABIs, the caller reserved space for
- registers that contained arguments. This was loosely
- refered to as their "home". Consequently, space is
- always allocated. */
-
- stack_offset += align_up (partial_len, MIPS32_REGSIZE);
- }
- }
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, "\n");
- }
-
- regcache_cooked_write_signed (regcache, MIPS_SP_REGNUM, sp);
-
- /* Return adjusted stack pointer. */
- return sp;
-}
-
-static enum return_value_convention
-mips_o32_return_value (struct gdbarch *gdbarch, struct type *func_type,
- struct type *type, struct regcache *regcache,
- gdb_byte *readbuf, const gdb_byte *writebuf)
-{
- struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
-
- if (TYPE_CODE (type) == TYPE_CODE_STRUCT
- || TYPE_CODE (type) == TYPE_CODE_UNION
- || TYPE_CODE (type) == TYPE_CODE_ARRAY)
- return RETURN_VALUE_STRUCT_CONVENTION;
- else if (TYPE_CODE (type) == TYPE_CODE_FLT
- && TYPE_LENGTH (type) == 4 && tdep->mips_fpu_type != MIPS_FPU_NONE)
- {
- /* A single-precision floating-point value. It fits in the
- least significant part of FP0. */
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
- mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch)
- + mips_regnum (gdbarch)->fp0,
- TYPE_LENGTH (type),
- gdbarch_byte_order (gdbarch),
- readbuf, writebuf, 0);
- return RETURN_VALUE_REGISTER_CONVENTION;
- }
- else if (TYPE_CODE (type) == TYPE_CODE_FLT
- && TYPE_LENGTH (type) == 8 && tdep->mips_fpu_type != MIPS_FPU_NONE)
- {
- /* A double-precision floating-point value. The most
- significant part goes in FP1, and the least significant in
- FP0. */
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return float in $fp1/$fp0\n");
- switch (gdbarch_byte_order (gdbarch))
- {
- case BFD_ENDIAN_LITTLE:
- mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch)
- + mips_regnum (gdbarch)->fp0 +
- 0, 4, gdbarch_byte_order (gdbarch),
- readbuf, writebuf, 0);
- mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch)
- + mips_regnum (gdbarch)->fp0 + 1,
- 4, gdbarch_byte_order (gdbarch),
- readbuf, writebuf, 4);
- break;
- case BFD_ENDIAN_BIG:
- mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch)
- + mips_regnum (gdbarch)->fp0 + 1,
- 4, gdbarch_byte_order (gdbarch),
- readbuf, writebuf, 0);
- mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch)
- + mips_regnum (gdbarch)->fp0 + 0,
- 4, gdbarch_byte_order (gdbarch),
- readbuf, writebuf, 4);
- break;
- default:
- internal_error (__FILE__, __LINE__, _("bad switch"));
- }
- return RETURN_VALUE_REGISTER_CONVENTION;
- }
-#if 0
- else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
- && TYPE_NFIELDS (type) <= 2
- && TYPE_NFIELDS (type) >= 1
- && ((TYPE_NFIELDS (type) == 1
- && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
- == TYPE_CODE_FLT))
- || (TYPE_NFIELDS (type) == 2
- && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
- == TYPE_CODE_FLT)
- && (TYPE_CODE (TYPE_FIELD_TYPE (type, 1))
- == TYPE_CODE_FLT)))
- && tdep->mips_fpu_type != MIPS_FPU_NONE)
- {
- /* A struct that contains one or two floats. Each value is part
- in the least significant part of their floating point
- register.. */
- gdb_byte reg[MAX_REGISTER_SIZE];
- int regnum;
- int field;
- for (field = 0, regnum = mips_regnum (gdbarch)->fp0;
- field < TYPE_NFIELDS (type); field++, regnum += 2)
- {
- int offset = (FIELD_BITPOS (TYPE_FIELDS (type)[field])
- / TARGET_CHAR_BIT);
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return float struct+%d\n",
- offset);
- mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch) + regnum,
- TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)),
- gdbarch_byte_order (gdbarch),
- readbuf, writebuf, offset);
+ /* Value may need to be sign extended, because
+ mips_isa_regsize() != mips_abi_regsize(). */
+
+ /* A non-floating-point argument being passed in a
+ general register. If a struct or union, and if
+ the remaining length is smaller than the register
+ size, we have to adjust the register value on
+ big endian targets.
+
+ It does not seem to be necessary to do the
+ same for integral types. */
+
+ if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG
+ && partial_len < MIPS64_REGSIZE
+ && (typecode == TYPE_CODE_STRUCT
+ || typecode == TYPE_CODE_UNION))
+ regval <<= ((MIPS64_REGSIZE - partial_len)
+ * TARGET_CHAR_BIT);
+
+ if (mips_debug)
+ fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
+ argreg,
+ phex (regval, MIPS64_REGSIZE));
+ regcache_cooked_write_unsigned (regcache, argreg, regval);
+ argreg++;
+
+ /* Prevent subsequent floating point arguments from
+ being passed in floating point registers. */
+ float_argreg = MIPS_LAST_FP_ARG_REGNUM (gdbarch) + 1;
+ }
+
+ len -= partial_len;
+ val += partial_len;
+
+ /* Compute the offset into the stack at which we will
+ copy the next parameter.
+
+ In older ABIs, the caller reserved space for
+ registers that contained arguments. This was loosely
+ refered to as their "home". Consequently, space is
+ always allocated. */
+
+ stack_offset += align_up (partial_len, MIPS64_REGSIZE);
+ }
}
- return RETURN_VALUE_REGISTER_CONVENTION;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, "\n");
}
-#endif
-#if 0
- else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
- || TYPE_CODE (type) == TYPE_CODE_UNION)
+
+ regcache_cooked_write_signed (regcache, MIPS_SP_REGNUM, sp);
+
+ /* Return adjusted stack pointer. */
+ return sp;
+}
+
+static enum return_value_convention
+mips_o64_return_value (struct gdbarch *gdbarch, struct value *function,
+ struct type *type, struct regcache *regcache,
+ gdb_byte *readbuf, const gdb_byte *writebuf)
+{
+ CORE_ADDR func_addr = function ? find_function_addr (function, NULL) : 0;
+ int mips16 = mips_pc_is_mips16 (gdbarch, func_addr);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ enum mips_fval_reg fval_reg;
+
+ fval_reg = readbuf ? mips16 ? mips_fval_gpr : mips_fval_fpr : mips_fval_both;
+ if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (type) == TYPE_CODE_UNION
+ || TYPE_CODE (type) == TYPE_CODE_ARRAY)
+ return RETURN_VALUE_STRUCT_CONVENTION;
+ else if (fp_register_arg_p (gdbarch, TYPE_CODE (type), type))
{
- /* A structure or union. Extract the left justified value,
- regardless of the byte order. I.e. DO NOT USE
- mips_xfer_lower. */
- int offset;
- int regnum;
- for (offset = 0, regnum = MIPS_V0_REGNUM;
- offset < TYPE_LENGTH (type);
- offset += register_size (gdbarch, regnum), regnum++)
- {
- int xfer = register_size (gdbarch, regnum);
- if (offset + xfer > TYPE_LENGTH (type))
- xfer = TYPE_LENGTH (type) - offset;
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return struct+%d:%d in $%d\n",
- offset, xfer, regnum);
- mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch) + regnum, xfer,
- BFD_ENDIAN_UNKNOWN, readbuf, writebuf, offset);
- }
+ /* A floating-point value. If reading in or copying, then we get it
+ from/put it to FP0 for standard MIPS code or GPR2 for MIPS16 code.
+ If writing out only, then we put it to both FP0 and GPR2. We do
+ not support reading in with no function known, if this safety
+ check ever triggers, then we'll have to try harder. */
+ gdb_assert (function || !readbuf);
+ if (mips_debug)
+ switch (fval_reg)
+ {
+ case mips_fval_fpr:
+ fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
+ break;
+ case mips_fval_gpr:
+ fprintf_unfiltered (gdb_stderr, "Return float in $2\n");
+ break;
+ case mips_fval_both:
+ fprintf_unfiltered (gdb_stderr, "Return float in $fp0 and $2\n");
+ break;
+ }
+ if (fval_reg != mips_fval_gpr)
+ mips_xfer_register (gdbarch, regcache,
+ (gdbarch_num_regs (gdbarch)
+ + mips_regnum (gdbarch)->fp0),
+ TYPE_LENGTH (type),
+ gdbarch_byte_order (gdbarch),
+ readbuf, writebuf, 0);
+ if (fval_reg != mips_fval_fpr)
+ mips_xfer_register (gdbarch, regcache,
+ gdbarch_num_regs (gdbarch) + 2,
+ TYPE_LENGTH (type),
+ gdbarch_byte_order (gdbarch),
+ readbuf, writebuf, 0);
return RETURN_VALUE_REGISTER_CONVENTION;
}
-#endif
else
{
/* A scalar extract each part but least-significant-byte
- justified. o32 thinks registers are 4 byte, regardless of
- the ISA. */
+ justified. */
int offset;
int regnum;
for (offset = 0, regnum = MIPS_V0_REGNUM;
offset < TYPE_LENGTH (type);
- offset += MIPS32_REGSIZE, regnum++)
+ offset += MIPS64_REGSIZE, regnum++)
{
- int xfer = MIPS32_REGSIZE;
+ int xfer = MIPS64_REGSIZE;
if (offset + xfer > TYPE_LENGTH (type))
xfer = TYPE_LENGTH (type) - offset;
if (mips_debug)
fprintf_unfiltered (gdb_stderr, "Return scalar+%d:%d in $%d\n",
offset, xfer, regnum);
mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch) + regnum, xfer,
- gdbarch_byte_order (gdbarch),
+ gdbarch_num_regs (gdbarch) + regnum,
+ xfer, gdbarch_byte_order (gdbarch),
readbuf, writebuf, offset);
}
return RETURN_VALUE_REGISTER_CONVENTION;
}
}
-/* O64 ABI. This is a hacked up kind of 64-bit version of the o32
- ABI. */
+/* Floating point register management.
-static CORE_ADDR
-mips_o64_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
- struct regcache *regcache, CORE_ADDR bp_addr,
- int nargs,
- struct value **args, CORE_ADDR sp,
- int struct_return, CORE_ADDR struct_addr)
+ Background: MIPS1 & 2 fp registers are 32 bits wide. To support
+ 64bit operations, these early MIPS cpus treat fp register pairs
+ (f0,f1) as a single register (d0). Later MIPS cpu's have 64 bit fp
+ registers and offer a compatibility mode that emulates the MIPS2 fp
+ model. When operating in MIPS2 fp compat mode, later cpu's split
+ double precision floats into two 32-bit chunks and store them in
+ consecutive fp regs. To display 64-bit floats stored in this
+ fashion, we have to combine 32 bits from f0 and 32 bits from f1.
+ Throw in user-configurable endianness and you have a real mess.
+
+ The way this works is:
+ - If we are in 32-bit mode or on a 32-bit processor, then a 64-bit
+ double-precision value will be split across two logical registers.
+ The lower-numbered logical register will hold the low-order bits,
+ regardless of the processor's endianness.
+ - If we are on a 64-bit processor, and we are looking for a
+ single-precision value, it will be in the low ordered bits
+ of a 64-bit GPR (after mfc1, for example) or a 64-bit register
+ save slot in memory.
+ - If we are in 64-bit mode, everything is straightforward.
+
+ Note that this code only deals with "live" registers at the top of the
+ stack. We will attempt to deal with saved registers later, when
+ the raw/cooked register interface is in place. (We need a general
+ interface that can deal with dynamic saved register sizes -- fp
+ regs could be 32 bits wide in one frame and 64 on the frame above
+ and below). */
+
+/* Copy a 32-bit single-precision value from the current frame
+ into rare_buffer. */
+
+static void
+mips_read_fp_register_single (struct frame_info *frame, int regno,
+ gdb_byte *rare_buffer)
{
- int argreg;
- int float_argreg;
- int argnum;
- int len = 0;
- int stack_offset = 0;
- struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
- enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
- CORE_ADDR func_addr = find_function_addr (function, NULL);
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+ int raw_size = register_size (gdbarch, regno);
+ gdb_byte *raw_buffer = alloca (raw_size);
- /* For shared libraries, "t9" needs to point at the function
- address. */
- regcache_cooked_write_signed (regcache, MIPS_T9_REGNUM, func_addr);
+ if (!deprecated_frame_register_read (frame, regno, raw_buffer))
+ error (_("can't read register %d (%s)"),
+ regno, gdbarch_register_name (gdbarch, regno));
+ if (raw_size == 8)
+ {
+ /* We have a 64-bit value for this register. Find the low-order
+ 32 bits. */
+ int offset;
- /* Set the return address register to point to the entry point of
- the program, where a breakpoint lies in wait. */
- regcache_cooked_write_signed (regcache, MIPS_RA_REGNUM, bp_addr);
+ if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
+ offset = 4;
+ else
+ offset = 0;
- /* First ensure that the stack and structure return address (if any)
- are properly aligned. The stack has to be at least 64-bit
- aligned even on 32-bit machines, because doubles must be 64-bit
- aligned. For n32 and n64, stack frames need to be 128-bit
- aligned, so we round to this widest known alignment. */
+ memcpy (rare_buffer, raw_buffer + offset, 4);
+ }
+ else
+ {
+ memcpy (rare_buffer, raw_buffer, 4);
+ }
+}
- sp = align_down (sp, 16);
- struct_addr = align_down (struct_addr, 16);
+/* Copy a 64-bit double-precision value from the current frame into
+ rare_buffer. This may include getting half of it from the next
+ register. */
- /* Now make space on the stack for the args. */
- for (argnum = 0; argnum < nargs; argnum++)
+static void
+mips_read_fp_register_double (struct frame_info *frame, int regno,
+ gdb_byte *rare_buffer)
+{
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+ int raw_size = register_size (gdbarch, regno);
+
+ if (raw_size == 8 && !mips2_fp_compat (frame))
{
- struct type *arg_type = check_typedef (value_type (args[argnum]));
- int arglen = TYPE_LENGTH (arg_type);
+ /* We have a 64-bit value for this register, and we should use
+ all 64 bits. */
+ if (!deprecated_frame_register_read (frame, regno, rare_buffer))
+ error (_("can't read register %d (%s)"),
+ regno, gdbarch_register_name (gdbarch, regno));
+ }
+ else
+ {
+ int rawnum = regno % gdbarch_num_regs (gdbarch);
+
+ if ((rawnum - mips_regnum (gdbarch)->fp0) & 1)
+ internal_error (__FILE__, __LINE__,
+ _("mips_read_fp_register_double: bad access to "
+ "odd-numbered FP register"));
+
+ /* mips_read_fp_register_single will find the correct 32 bits from
+ each register. */
+ if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
+ {
+ mips_read_fp_register_single (frame, regno, rare_buffer + 4);
+ mips_read_fp_register_single (frame, regno + 1, rare_buffer);
+ }
+ else
+ {
+ mips_read_fp_register_single (frame, regno, rare_buffer);
+ mips_read_fp_register_single (frame, regno + 1, rare_buffer + 4);
+ }
+ }
+}
+
+static void
+mips_print_fp_register (struct ui_file *file, struct frame_info *frame,
+ int regnum)
+{ /* Do values for FP (float) regs. */
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+ gdb_byte *raw_buffer;
+ double doub, flt1; /* Doubles extracted from raw hex data. */
+ int inv1, inv2;
+
+ raw_buffer = alloca (2 * register_size (gdbarch,
+ mips_regnum (gdbarch)->fp0));
+
+ fprintf_filtered (file, "%s:", gdbarch_register_name (gdbarch, regnum));
+ fprintf_filtered (file, "%*s",
+ 4 - (int) strlen (gdbarch_register_name (gdbarch, regnum)),
+ "");
+
+ if (register_size (gdbarch, regnum) == 4 || mips2_fp_compat (frame))
+ {
+ struct value_print_options opts;
+
+ /* 4-byte registers: Print hex and floating. Also print even
+ numbered registers as doubles. */
+ mips_read_fp_register_single (frame, regnum, raw_buffer);
+ flt1 = unpack_double (builtin_type (gdbarch)->builtin_float,
+ raw_buffer, &inv1);
- /* Allocate space on the stack. */
- len += align_up (arglen, MIPS64_REGSIZE);
- }
- sp -= align_up (len, 16);
+ get_formatted_print_options (&opts, 'x');
+ print_scalar_formatted (raw_buffer,
+ builtin_type (gdbarch)->builtin_uint32,
+ &opts, 'w', file);
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog,
- "mips_o64_push_dummy_call: sp=%s allocated %ld\n",
- paddress (gdbarch, sp), (long) align_up (len, 16));
+ fprintf_filtered (file, " flt: ");
+ if (inv1)
+ fprintf_filtered (file, " <invalid float> ");
+ else
+ fprintf_filtered (file, "%-17.9g", flt1);
- /* Initialize the integer and float register pointers. */
- argreg = MIPS_A0_REGNUM;
- float_argreg = mips_fpa0_regnum (gdbarch);
+ if ((regnum - gdbarch_num_regs (gdbarch)) % 2 == 0)
+ {
+ mips_read_fp_register_double (frame, regnum, raw_buffer);
+ doub = unpack_double (builtin_type (gdbarch)->builtin_double,
+ raw_buffer, &inv2);
- /* The struct_return pointer occupies the first parameter-passing reg. */
- if (struct_return)
- {
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog,
- "mips_o64_push_dummy_call: "
- "struct_return reg=%d %s\n",
- argreg, paddress (gdbarch, struct_addr));
- regcache_cooked_write_unsigned (regcache, argreg++, struct_addr);
- stack_offset += MIPS64_REGSIZE;
+ fprintf_filtered (file, " dbl: ");
+ if (inv2)
+ fprintf_filtered (file, "<invalid double>");
+ else
+ fprintf_filtered (file, "%-24.17g", doub);
+ }
}
-
- /* Now load as many as possible of the first arguments into
- registers, and push the rest onto the stack. Loop thru args
- from first to last. */
- for (argnum = 0; argnum < nargs; argnum++)
+ else
{
- const gdb_byte *val;
- gdb_byte valbuf[MAX_REGISTER_SIZE];
- struct value *arg = args[argnum];
- struct type *arg_type = check_typedef (value_type (arg));
- int len = TYPE_LENGTH (arg_type);
- enum type_code typecode = TYPE_CODE (arg_type);
+ struct value_print_options opts;
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog,
- "mips_o64_push_dummy_call: %d len=%d type=%d",
- argnum + 1, len, (int) typecode);
+ /* Eight byte registers: print each one as hex, float and double. */
+ mips_read_fp_register_single (frame, regnum, raw_buffer);
+ flt1 = unpack_double (builtin_type (gdbarch)->builtin_float,
+ raw_buffer, &inv1);
- val = value_contents (arg);
+ mips_read_fp_register_double (frame, regnum, raw_buffer);
+ doub = unpack_double (builtin_type (gdbarch)->builtin_double,
+ raw_buffer, &inv2);
- /* Function pointer arguments to mips16 code need to be made into
- mips16 pointers. */
- if (typecode == TYPE_CODE_PTR
- && TYPE_CODE (TYPE_TARGET_TYPE (arg_type)) == TYPE_CODE_FUNC)
- {
- CORE_ADDR addr = extract_signed_integer (value_contents (arg),
- len, byte_order);
- if (mips_pc_is_mips16 (addr))
- {
- store_signed_integer (valbuf, len, byte_order,
- make_mips16_addr (addr));
- val = valbuf;
- }
- }
+ get_formatted_print_options (&opts, 'x');
+ print_scalar_formatted (raw_buffer,
+ builtin_type (gdbarch)->builtin_uint64,
+ &opts, 'g', file);
- /* Floating point arguments passed in registers have to be
- treated specially. On 32-bit architectures, doubles
- are passed in register pairs; the even register gets
- the low word, and the odd register gets the high word.
- On O32/O64, the first two floating point arguments are
- also copied to general registers, because MIPS16 functions
- don't use float registers for arguments. This duplication of
- arguments in general registers can't hurt non-MIPS16 functions
- because those registers are normally skipped. */
+ fprintf_filtered (file, " flt: ");
+ if (inv1)
+ fprintf_filtered (file, "<invalid float>");
+ else
+ fprintf_filtered (file, "%-17.9g", flt1);
- if (fp_register_arg_p (gdbarch, typecode, arg_type)
- && float_argreg <= MIPS_LAST_FP_ARG_REGNUM (gdbarch))
- {
- LONGEST regval = extract_unsigned_integer (val, len, byte_order);
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
- float_argreg, phex (regval, len));
- regcache_cooked_write_unsigned (regcache, float_argreg++, regval);
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
- argreg, phex (regval, len));
- regcache_cooked_write_unsigned (regcache, argreg, regval);
- argreg++;
- /* Reserve space for the FP register. */
- stack_offset += align_up (len, MIPS64_REGSIZE);
- }
+ fprintf_filtered (file, " dbl: ");
+ if (inv2)
+ fprintf_filtered (file, "<invalid double>");
else
- {
- /* Copy the argument to general registers or the stack in
- register-sized pieces. Large arguments are split between
- registers and stack. */
- /* Note: structs whose size is not a multiple of MIPS64_REGSIZE
- are treated specially: Irix cc passes them in registers
- where gcc sometimes puts them on the stack. For maximum
- compatibility, we will put them in both places. */
- int odd_sized_struct = (len > MIPS64_REGSIZE
- && len % MIPS64_REGSIZE != 0);
- while (len > 0)
- {
- /* Remember if the argument was written to the stack. */
- int stack_used_p = 0;
- int partial_len = (len < MIPS64_REGSIZE ? len : MIPS64_REGSIZE);
+ fprintf_filtered (file, "%-24.17g", doub);
+ }
+}
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
- partial_len);
+static void
+mips_print_register (struct ui_file *file, struct frame_info *frame,
+ int regnum)
+{
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+ struct value_print_options opts;
+ struct value *val;
- /* Write this portion of the argument to the stack. */
- if (argreg > MIPS_LAST_ARG_REGNUM (gdbarch)
- || odd_sized_struct)
- {
- /* Should shorter than int integer values be
- promoted to int before being stored? */
- int longword_offset = 0;
- CORE_ADDR addr;
- stack_used_p = 1;
- if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
- {
- if ((typecode == TYPE_CODE_INT
- || typecode == TYPE_CODE_PTR
- || typecode == TYPE_CODE_FLT)
- && len <= 4)
- longword_offset = MIPS64_REGSIZE - len;
- }
+ if (mips_float_register_p (gdbarch, regnum))
+ {
+ mips_print_fp_register (file, frame, regnum);
+ return;
+ }
- if (mips_debug)
- {
- fprintf_unfiltered (gdb_stdlog, " - stack_offset=%s",
- paddress (gdbarch, stack_offset));
- fprintf_unfiltered (gdb_stdlog, " longword_offset=%s",
- paddress (gdbarch, longword_offset));
- }
+ val = get_frame_register_value (frame, regnum);
- addr = sp + stack_offset + longword_offset;
+ fputs_filtered (gdbarch_register_name (gdbarch, regnum), file);
- if (mips_debug)
- {
- int i;
- fprintf_unfiltered (gdb_stdlog, " @%s ",
- paddress (gdbarch, addr));
- for (i = 0; i < partial_len; i++)
- {
- fprintf_unfiltered (gdb_stdlog, "%02x",
- val[i] & 0xff);
- }
- }
- write_memory (addr, val, partial_len);
- }
+ /* The problem with printing numeric register names (r26, etc.) is that
+ the user can't use them on input. Probably the best solution is to
+ fix it so that either the numeric or the funky (a2, etc.) names
+ are accepted on input. */
+ if (regnum < MIPS_NUMREGS)
+ fprintf_filtered (file, "(r%d): ", regnum);
+ else
+ fprintf_filtered (file, ": ");
- /* Note!!! This is NOT an else clause. Odd sized
- structs may go thru BOTH paths. */
- /* Write this portion of the argument to a general
- purpose register. */
- if (argreg <= MIPS_LAST_ARG_REGNUM (gdbarch))
- {
- LONGEST regval = extract_signed_integer (val, partial_len,
- byte_order);
- /* Value may need to be sign extended, because
- mips_isa_regsize() != mips_abi_regsize(). */
+ get_formatted_print_options (&opts, 'x');
+ val_print_scalar_formatted (value_type (val),
+ value_contents_for_printing (val),
+ value_embedded_offset (val),
+ val,
+ &opts, 0, file);
+}
- /* A non-floating-point argument being passed in a
- general register. If a struct or union, and if
- the remaining length is smaller than the register
- size, we have to adjust the register value on
- big endian targets.
+/* Replacement for generic do_registers_info.
+ Print regs in pretty columns. */
- It does not seem to be necessary to do the
- same for integral types. */
+static int
+print_fp_register_row (struct ui_file *file, struct frame_info *frame,
+ int regnum)
+{
+ fprintf_filtered (file, " ");
+ mips_print_fp_register (file, frame, regnum);
+ fprintf_filtered (file, "\n");
+ return regnum + 1;
+}
- if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG
- && partial_len < MIPS64_REGSIZE
- && (typecode == TYPE_CODE_STRUCT
- || typecode == TYPE_CODE_UNION))
- regval <<= ((MIPS64_REGSIZE - partial_len)
- * TARGET_CHAR_BIT);
- if (mips_debug)
- fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
- argreg,
- phex (regval, MIPS64_REGSIZE));
- regcache_cooked_write_unsigned (regcache, argreg, regval);
- argreg++;
+/* Print a row's worth of GP (int) registers, with name labels above. */
+
+static int
+print_gp_register_row (struct ui_file *file, struct frame_info *frame,
+ int start_regnum)
+{
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+ /* Do values for GP (int) regs. */
+ gdb_byte raw_buffer[MAX_REGISTER_SIZE];
+ int ncols = (mips_abi_regsize (gdbarch) == 8 ? 4 : 8); /* display cols
+ per row. */
+ int col, byte;
+ int regnum;
+
+ /* For GP registers, we print a separate row of names above the vals. */
+ for (col = 0, regnum = start_regnum;
+ col < ncols && regnum < gdbarch_num_regs (gdbarch)
+ + gdbarch_num_pseudo_regs (gdbarch);
+ regnum++)
+ {
+ if (*gdbarch_register_name (gdbarch, regnum) == '\0')
+ continue; /* unused register */
+ if (mips_float_register_p (gdbarch, regnum))
+ break; /* End the row: reached FP register. */
+ /* Large registers are handled separately. */
+ if (register_size (gdbarch, regnum) > mips_abi_regsize (gdbarch))
+ {
+ if (col > 0)
+ break; /* End the row before this register. */
- /* Prevent subsequent floating point arguments from
- being passed in floating point registers. */
- float_argreg = MIPS_LAST_FP_ARG_REGNUM (gdbarch) + 1;
- }
+ /* Print this register on a row by itself. */
+ mips_print_register (file, frame, regnum);
+ fprintf_filtered (file, "\n");
+ return regnum + 1;
+ }
+ if (col == 0)
+ fprintf_filtered (file, " ");
+ fprintf_filtered (file,
+ mips_abi_regsize (gdbarch) == 8 ? "%17s" : "%9s",
+ gdbarch_register_name (gdbarch, regnum));
+ col++;
+ }
- len -= partial_len;
- val += partial_len;
+ if (col == 0)
+ return regnum;
- /* Compute the offset into the stack at which we will
- copy the next parameter.
+ /* Print the R0 to R31 names. */
+ if ((start_regnum % gdbarch_num_regs (gdbarch)) < MIPS_NUMREGS)
+ fprintf_filtered (file, "\n R%-4d",
+ start_regnum % gdbarch_num_regs (gdbarch));
+ else
+ fprintf_filtered (file, "\n ");
- In older ABIs, the caller reserved space for
- registers that contained arguments. This was loosely
- refered to as their "home". Consequently, space is
- always allocated. */
+ /* Now print the values in hex, 4 or 8 to the row. */
+ for (col = 0, regnum = start_regnum;
+ col < ncols && regnum < gdbarch_num_regs (gdbarch)
+ + gdbarch_num_pseudo_regs (gdbarch);
+ regnum++)
+ {
+ if (*gdbarch_register_name (gdbarch, regnum) == '\0')
+ continue; /* unused register */
+ if (mips_float_register_p (gdbarch, regnum))
+ break; /* End row: reached FP register. */
+ if (register_size (gdbarch, regnum) > mips_abi_regsize (gdbarch))
+ break; /* End row: large register. */
- stack_offset += align_up (partial_len, MIPS64_REGSIZE);
- }
- }
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, "\n");
+ /* OK: get the data in raw format. */
+ if (!deprecated_frame_register_read (frame, regnum, raw_buffer))
+ error (_("can't read register %d (%s)"),
+ regnum, gdbarch_register_name (gdbarch, regnum));
+ /* pad small registers */
+ for (byte = 0;
+ byte < (mips_abi_regsize (gdbarch)
+ - register_size (gdbarch, regnum)); byte++)
+ printf_filtered (" ");
+ /* Now print the register value in hex, endian order. */
+ if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
+ for (byte =
+ register_size (gdbarch, regnum) - register_size (gdbarch, regnum);
+ byte < register_size (gdbarch, regnum); byte++)
+ fprintf_filtered (file, "%02x", raw_buffer[byte]);
+ else
+ for (byte = register_size (gdbarch, regnum) - 1;
+ byte >= 0; byte--)
+ fprintf_filtered (file, "%02x", raw_buffer[byte]);
+ fprintf_filtered (file, " ");
+ col++;
}
+ if (col > 0) /* ie. if we actually printed anything... */
+ fprintf_filtered (file, "\n");
- regcache_cooked_write_signed (regcache, MIPS_SP_REGNUM, sp);
-
- /* Return adjusted stack pointer. */
- return sp;
+ return regnum;
}
-static enum return_value_convention
-mips_o64_return_value (struct gdbarch *gdbarch, struct type *func_type,
- struct type *type, struct regcache *regcache,
- gdb_byte *readbuf, const gdb_byte *writebuf)
-{
- struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+/* MIPS_DO_REGISTERS_INFO(): called by "info register" command. */
- if (TYPE_CODE (type) == TYPE_CODE_STRUCT
- || TYPE_CODE (type) == TYPE_CODE_UNION
- || TYPE_CODE (type) == TYPE_CODE_ARRAY)
- return RETURN_VALUE_STRUCT_CONVENTION;
- else if (fp_register_arg_p (gdbarch, TYPE_CODE (type), type))
+static void
+mips_print_registers_info (struct gdbarch *gdbarch, struct ui_file *file,
+ struct frame_info *frame, int regnum, int all)
+{
+ if (regnum != -1) /* Do one specified register. */
{
- /* A floating-point value. It fits in the least significant
- part of FP0. */
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
- mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch)
- + mips_regnum (gdbarch)->fp0,
- TYPE_LENGTH (type),
- gdbarch_byte_order (gdbarch),
- readbuf, writebuf, 0);
- return RETURN_VALUE_REGISTER_CONVENTION;
+ gdb_assert (regnum >= gdbarch_num_regs (gdbarch));
+ if (*(gdbarch_register_name (gdbarch, regnum)) == '\0')
+ error (_("Not a valid register for the current processor type"));
+
+ mips_print_register (file, frame, regnum);
+ fprintf_filtered (file, "\n");
}
else
+ /* Do all (or most) registers. */
{
- /* A scalar extract each part but least-significant-byte
- justified. */
- int offset;
- int regnum;
- for (offset = 0, regnum = MIPS_V0_REGNUM;
- offset < TYPE_LENGTH (type);
- offset += MIPS64_REGSIZE, regnum++)
+ regnum = gdbarch_num_regs (gdbarch);
+ while (regnum < gdbarch_num_regs (gdbarch)
+ + gdbarch_num_pseudo_regs (gdbarch))
{
- int xfer = MIPS64_REGSIZE;
- if (offset + xfer > TYPE_LENGTH (type))
- xfer = TYPE_LENGTH (type) - offset;
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return scalar+%d:%d in $%d\n",
- offset, xfer, regnum);
- mips_xfer_register (gdbarch, regcache,
- gdbarch_num_regs (gdbarch) + regnum,
- xfer, gdbarch_byte_order (gdbarch),
- readbuf, writebuf, offset);
+ if (mips_float_register_p (gdbarch, regnum))
+ {
+ if (all) /* True for "INFO ALL-REGISTERS" command. */
+ regnum = print_fp_register_row (file, frame, regnum);
+ else
+ regnum += MIPS_NUMREGS; /* Skip floating point regs. */
+ }
+ else
+ regnum = print_gp_register_row (file, frame, regnum);
}
- return RETURN_VALUE_REGISTER_CONVENTION;
}
}
-/* Floating point register management.
+static int
+mips_single_step_through_delay (struct gdbarch *gdbarch,
+ struct frame_info *frame)
+{
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ CORE_ADDR pc = get_frame_pc (frame);
+ struct address_space *aspace;
+ enum mips_isa isa;
+ ULONGEST insn;
+ int status;
+ int size;
+
+ if ((mips_pc_is_mips (pc)
+ && !mips32_insn_at_pc_has_delay_slot (gdbarch, pc))
+ || (mips_pc_is_micromips (gdbarch, pc)
+ && !micromips_insn_at_pc_has_delay_slot (gdbarch, pc, 0))
+ || (mips_pc_is_mips16 (gdbarch, pc)
+ && !mips16_insn_at_pc_has_delay_slot (gdbarch, pc, 0)))
+ return 0;
- Background: MIPS1 & 2 fp registers are 32 bits wide. To support
- 64bit operations, these early MIPS cpus treat fp register pairs
- (f0,f1) as a single register (d0). Later MIPS cpu's have 64 bit fp
- registers and offer a compatibility mode that emulates the MIPS2 fp
- model. When operating in MIPS2 fp compat mode, later cpu's split
- double precision floats into two 32-bit chunks and store them in
- consecutive fp regs. To display 64-bit floats stored in this
- fashion, we have to combine 32 bits from f0 and 32 bits from f1.
- Throw in user-configurable endianness and you have a real mess.
+ isa = mips_pc_isa (gdbarch, pc);
+ /* _has_delay_slot above will have validated the read. */
+ insn = mips_fetch_instruction (gdbarch, isa, pc, NULL);
+ size = mips_insn_size (isa, insn);
+ aspace = get_frame_address_space (frame);
+ return breakpoint_here_p (aspace, pc + size) != no_breakpoint_here;
+}
- The way this works is:
- - If we are in 32-bit mode or on a 32-bit processor, then a 64-bit
- double-precision value will be split across two logical registers.
- The lower-numbered logical register will hold the low-order bits,
- regardless of the processor's endianness.
- - If we are on a 64-bit processor, and we are looking for a
- single-precision value, it will be in the low ordered bits
- of a 64-bit GPR (after mfc1, for example) or a 64-bit register
- save slot in memory.
- - If we are in 64-bit mode, everything is straightforward.
+/* To skip prologues, I use this predicate. Returns either PC itself
+ if the code at PC does not look like a function prologue; otherwise
+ returns an address that (if we're lucky) follows the prologue. If
+ LENIENT, then we must skip everything which is involved in setting
+ up the frame (it's OK to skip more, just so long as we don't skip
+ anything which might clobber the registers which are being saved.
+ We must skip more in the case where part of the prologue is in the
+ delay slot of a non-prologue instruction). */
- Note that this code only deals with "live" registers at the top of the
- stack. We will attempt to deal with saved registers later, when
- the raw/cooked register interface is in place. (We need a general
- interface that can deal with dynamic saved register sizes -- fp
- regs could be 32 bits wide in one frame and 64 on the frame above
- and below). */
+static CORE_ADDR
+mips_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
+{
+ CORE_ADDR limit_pc;
+ CORE_ADDR func_addr;
-/* Copy a 32-bit single-precision value from the current frame
- into rare_buffer. */
+ /* See if we can determine the end of the prologue via the symbol table.
+ If so, then return either PC, or the PC after the prologue, whichever
+ is greater. */
+ if (find_pc_partial_function (pc, NULL, &func_addr, NULL))
+ {
+ CORE_ADDR post_prologue_pc
+ = skip_prologue_using_sal (gdbarch, func_addr);
+ if (post_prologue_pc != 0)
+ return max (pc, post_prologue_pc);
+ }
-static void
-mips_read_fp_register_single (struct frame_info *frame, int regno,
- gdb_byte *rare_buffer)
+ /* Can't determine prologue from the symbol table, need to examine
+ instructions. */
+
+ /* Find an upper limit on the function prologue using the debug
+ information. If the debug information could not be used to provide
+ that bound, then use an arbitrary large number as the upper bound. */
+ limit_pc = skip_prologue_using_sal (gdbarch, pc);
+ if (limit_pc == 0)
+ limit_pc = pc + 100; /* Magic. */
+
+ if (mips_pc_is_mips16 (gdbarch, pc))
+ return mips16_scan_prologue (gdbarch, pc, limit_pc, NULL, NULL);
+ else if (mips_pc_is_micromips (gdbarch, pc))
+ return micromips_scan_prologue (gdbarch, pc, limit_pc, NULL, NULL);
+ else
+ return mips32_scan_prologue (gdbarch, pc, limit_pc, NULL, NULL);
+}
+
+/* Check whether the PC is in a function epilogue (32-bit version).
+ This is a helper function for mips_in_function_epilogue_p. */
+static int
+mips32_in_function_epilogue_p (struct gdbarch *gdbarch, CORE_ADDR pc)
{
- struct gdbarch *gdbarch = get_frame_arch (frame);
- int raw_size = register_size (gdbarch, regno);
- gdb_byte *raw_buffer = alloca (raw_size);
+ CORE_ADDR func_addr = 0, func_end = 0;
- if (!frame_register_read (frame, regno, raw_buffer))
- error (_("can't read register %d (%s)"),
- regno, gdbarch_register_name (gdbarch, regno));
- if (raw_size == 8)
+ if (find_pc_partial_function (pc, NULL, &func_addr, &func_end))
{
- /* We have a 64-bit value for this register. Find the low-order
- 32 bits. */
- int offset;
+ /* The MIPS epilogue is max. 12 bytes long. */
+ CORE_ADDR addr = func_end - 12;
- if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
- offset = 4;
- else
- offset = 0;
+ if (addr < func_addr + 4)
+ addr = func_addr + 4;
+ if (pc < addr)
+ return 0;
+
+ for (; pc < func_end; pc += MIPS_INSN32_SIZE)
+ {
+ unsigned long high_word;
+ unsigned long inst;
+
+ inst = mips_fetch_instruction (gdbarch, ISA_MIPS, pc, NULL);
+ high_word = (inst >> 16) & 0xffff;
+
+ if (high_word != 0x27bd /* addiu $sp,$sp,offset */
+ && high_word != 0x67bd /* daddiu $sp,$sp,offset */
+ && inst != 0x03e00008 /* jr $ra */
+ && inst != 0x00000000) /* nop */
+ return 0;
+ }
- memcpy (rare_buffer, raw_buffer + offset, 4);
- }
- else
- {
- memcpy (rare_buffer, raw_buffer, 4);
+ return 1;
}
+
+ return 0;
}
-/* Copy a 64-bit double-precision value from the current frame into
- rare_buffer. This may include getting half of it from the next
- register. */
+/* Check whether the PC is in a function epilogue (microMIPS version).
+ This is a helper function for mips_in_function_epilogue_p. */
-static void
-mips_read_fp_register_double (struct frame_info *frame, int regno,
- gdb_byte *rare_buffer)
-{
- struct gdbarch *gdbarch = get_frame_arch (frame);
- int raw_size = register_size (gdbarch, regno);
+static int
+micromips_in_function_epilogue_p (struct gdbarch *gdbarch, CORE_ADDR pc)
+{
+ CORE_ADDR func_addr = 0;
+ CORE_ADDR func_end = 0;
+ CORE_ADDR addr;
+ ULONGEST insn;
+ long offset;
+ int dreg;
+ int sreg;
+ int loc;
+
+ if (!find_pc_partial_function (pc, NULL, &func_addr, &func_end))
+ return 0;
- if (raw_size == 8 && !mips2_fp_compat (frame))
- {
- /* We have a 64-bit value for this register, and we should use
- all 64 bits. */
- if (!frame_register_read (frame, regno, rare_buffer))
- error (_("can't read register %d (%s)"),
- regno, gdbarch_register_name (gdbarch, regno));
- }
- else
- {
- int rawnum = regno % gdbarch_num_regs (gdbarch);
+ /* The microMIPS epilogue is max. 12 bytes long. */
+ addr = func_end - 12;
- if ((rawnum - mips_regnum (gdbarch)->fp0) & 1)
- internal_error (__FILE__, __LINE__,
- _("mips_read_fp_register_double: bad access to "
- "odd-numbered FP register"));
+ if (addr < func_addr + 2)
+ addr = func_addr + 2;
+ if (pc < addr)
+ return 0;
- /* mips_read_fp_register_single will find the correct 32 bits from
- each register. */
- if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
- {
- mips_read_fp_register_single (frame, regno, rare_buffer + 4);
- mips_read_fp_register_single (frame, regno + 1, rare_buffer);
- }
- else
+ for (; pc < func_end; pc += loc)
+ {
+ loc = 0;
+ insn = mips_fetch_instruction (gdbarch, ISA_MICROMIPS, pc, NULL);
+ loc += MIPS_INSN16_SIZE;
+ switch (mips_insn_size (ISA_MICROMIPS, insn))
{
- mips_read_fp_register_single (frame, regno, rare_buffer);
- mips_read_fp_register_single (frame, regno + 1, rare_buffer + 4);
+ /* 48-bit instructions. */
+ case 3 * MIPS_INSN16_SIZE:
+ /* No epilogue instructions in this category. */
+ return 0;
+
+ /* 32-bit instructions. */
+ case 2 * MIPS_INSN16_SIZE:
+ insn <<= 16;
+ insn |= mips_fetch_instruction (gdbarch,
+ ISA_MICROMIPS, pc + loc, NULL);
+ loc += MIPS_INSN16_SIZE;
+ switch (micromips_op (insn >> 16))
+ {
+ case 0xc: /* ADDIU: bits 001100 */
+ case 0x17: /* DADDIU: bits 010111 */
+ sreg = b0s5_reg (insn >> 16);
+ dreg = b5s5_reg (insn >> 16);
+ offset = (b0s16_imm (insn) ^ 0x8000) - 0x8000;
+ if (sreg == MIPS_SP_REGNUM && dreg == MIPS_SP_REGNUM
+ /* (D)ADDIU $sp, imm */
+ && offset >= 0)
+ break;
+ return 0;
+
+ default:
+ return 0;
+ }
+ break;
+
+ /* 16-bit instructions. */
+ case MIPS_INSN16_SIZE:
+ switch (micromips_op (insn))
+ {
+ case 0x3: /* MOVE: bits 000011 */
+ sreg = b0s5_reg (insn);
+ dreg = b5s5_reg (insn);
+ if (sreg == 0 && dreg == 0)
+ /* MOVE $zero, $zero aka NOP */
+ break;
+ return 0;
+
+ case 0x11: /* POOL16C: bits 010001 */
+ if (b5s5_op (insn) == 0x18
+ /* JRADDIUSP: bits 010011 11000 */
+ || (b5s5_op (insn) == 0xd
+ /* JRC: bits 010011 01101 */
+ && b0s5_reg (insn) == MIPS_RA_REGNUM))
+ /* JRC $ra */
+ break;
+ return 0;
+
+ case 0x13: /* POOL16D: bits 010011 */
+ offset = micromips_decode_imm9 (b1s9_imm (insn));
+ if ((insn & 0x1) == 0x1
+ /* ADDIUSP: bits 010011 1 */
+ && offset > 0)
+ break;
+ return 0;
+
+ default:
+ return 0;
+ }
}
}
-}
-
-static void
-mips_print_fp_register (struct ui_file *file, struct frame_info *frame,
- int regnum)
-{ /* Do values for FP (float) regs. */
- struct gdbarch *gdbarch = get_frame_arch (frame);
- gdb_byte *raw_buffer;
- double doub, flt1; /* Doubles extracted from raw hex data. */
- int inv1, inv2;
- raw_buffer = alloca (2 * register_size (gdbarch,
- mips_regnum (gdbarch)->fp0));
+ return 1;
+}
- fprintf_filtered (file, "%s:", gdbarch_register_name (gdbarch, regnum));
- fprintf_filtered (file, "%*s",
- 4 - (int) strlen (gdbarch_register_name (gdbarch, regnum)),
- "");
+/* Check whether the PC is in a function epilogue (16-bit version).
+ This is a helper function for mips_in_function_epilogue_p. */
+static int
+mips16_in_function_epilogue_p (struct gdbarch *gdbarch, CORE_ADDR pc)
+{
+ CORE_ADDR func_addr = 0, func_end = 0;
- if (register_size (gdbarch, regnum) == 4 || mips2_fp_compat (frame))
+ if (find_pc_partial_function (pc, NULL, &func_addr, &func_end))
{
- struct value_print_options opts;
+ /* The MIPS epilogue is max. 12 bytes long. */
+ CORE_ADDR addr = func_end - 12;
- /* 4-byte registers: Print hex and floating. Also print even
- numbered registers as doubles. */
- mips_read_fp_register_single (frame, regnum, raw_buffer);
- flt1 = unpack_double (builtin_type (gdbarch)->builtin_float,
- raw_buffer, &inv1);
+ if (addr < func_addr + 4)
+ addr = func_addr + 4;
+ if (pc < addr)
+ return 0;
- get_formatted_print_options (&opts, 'x');
- print_scalar_formatted (raw_buffer,
- builtin_type (gdbarch)->builtin_uint32,
- &opts, 'w', file);
+ for (; pc < func_end; pc += MIPS_INSN16_SIZE)
+ {
+ unsigned short inst;
- fprintf_filtered (file, " flt: ");
- if (inv1)
- fprintf_filtered (file, " <invalid float> ");
- else
- fprintf_filtered (file, "%-17.9g", flt1);
+ inst = mips_fetch_instruction (gdbarch, ISA_MIPS16, pc, NULL);
- if ((regnum - gdbarch_num_regs (gdbarch)) % 2 == 0)
- {
- mips_read_fp_register_double (frame, regnum, raw_buffer);
- doub = unpack_double (builtin_type (gdbarch)->builtin_double,
- raw_buffer, &inv2);
+ if ((inst & 0xf800) == 0xf000) /* extend */
+ continue;
- fprintf_filtered (file, " dbl: ");
- if (inv2)
- fprintf_filtered (file, "<invalid double>");
- else
- fprintf_filtered (file, "%-24.17g", doub);
+ if (inst != 0x6300 /* addiu $sp,offset */
+ && inst != 0xfb00 /* daddiu $sp,$sp,offset */
+ && inst != 0xe820 /* jr $ra */
+ && inst != 0xe8a0 /* jrc $ra */
+ && inst != 0x6500) /* nop */
+ return 0;
}
+
+ return 1;
}
- else
- {
- struct value_print_options opts;
- /* Eight byte registers: print each one as hex, float and double. */
- mips_read_fp_register_single (frame, regnum, raw_buffer);
- flt1 = unpack_double (builtin_type (gdbarch)->builtin_float,
- raw_buffer, &inv1);
+ return 0;
+}
- mips_read_fp_register_double (frame, regnum, raw_buffer);
- doub = unpack_double (builtin_type (gdbarch)->builtin_double,
- raw_buffer, &inv2);
+/* The epilogue is defined here as the area at the end of a function,
+ after an instruction which destroys the function's stack frame. */
+static int
+mips_in_function_epilogue_p (struct gdbarch *gdbarch, CORE_ADDR pc)
+{
+ if (mips_pc_is_mips16 (gdbarch, pc))
+ return mips16_in_function_epilogue_p (gdbarch, pc);
+ else if (mips_pc_is_micromips (gdbarch, pc))
+ return micromips_in_function_epilogue_p (gdbarch, pc);
+ else
+ return mips32_in_function_epilogue_p (gdbarch, pc);
+}
- get_formatted_print_options (&opts, 'x');
- print_scalar_formatted (raw_buffer,
- builtin_type (gdbarch)->builtin_uint64,
- &opts, 'g', file);
+/* Root of all "set mips "/"show mips " commands. This will eventually be
+ used for all MIPS-specific commands. */
- fprintf_filtered (file, " flt: ");
- if (inv1)
- fprintf_filtered (file, "<invalid float>");
- else
- fprintf_filtered (file, "%-17.9g", flt1);
+static void
+show_mips_command (char *args, int from_tty)
+{
+ help_list (showmipscmdlist, "show mips ", all_commands, gdb_stdout);
+}
- fprintf_filtered (file, " dbl: ");
- if (inv2)
- fprintf_filtered (file, "<invalid double>");
- else
- fprintf_filtered (file, "%-24.17g", doub);
- }
+static void
+set_mips_command (char *args, int from_tty)
+{
+ printf_unfiltered
+ ("\"set mips\" must be followed by an appropriate subcommand.\n");
+ help_list (setmipscmdlist, "set mips ", all_commands, gdb_stdout);
}
+/* Commands to show/set the MIPS FPU type. */
+
static void
-mips_print_register (struct ui_file *file, struct frame_info *frame,
- int regnum)
+show_mipsfpu_command (char *args, int from_tty)
{
- struct gdbarch *gdbarch = get_frame_arch (frame);
- int offset;
- struct value_print_options opts;
- struct value *val;
+ char *fpu;
- if (TYPE_CODE (register_type (gdbarch, regnum)) == TYPE_CODE_FLT)
+ if (gdbarch_bfd_arch_info (target_gdbarch ())->arch != bfd_arch_mips)
{
- mips_print_fp_register (file, frame, regnum);
+ printf_unfiltered
+ ("The MIPS floating-point coprocessor is unknown "
+ "because the current architecture is not MIPS.\n");
return;
}
- val = get_frame_register_value (frame, regnum);
- if (value_optimized_out (val))
+ switch (MIPS_FPU_TYPE (target_gdbarch ()))
{
- fprintf_filtered (file, "%s: [Invalid]",
- gdbarch_register_name (gdbarch, regnum));
- return;
+ case MIPS_FPU_SINGLE:
+ fpu = "single-precision";
+ break;
+ case MIPS_FPU_DOUBLE:
+ fpu = "double-precision";
+ break;
+ case MIPS_FPU_NONE:
+ fpu = "absent (none)";
+ break;
+ default:
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
+ if (mips_fpu_type_auto)
+ printf_unfiltered ("The MIPS floating-point coprocessor "
+ "is set automatically (currently %s)\n",
+ fpu);
+ else
+ printf_unfiltered
+ ("The MIPS floating-point coprocessor is assumed to be %s\n", fpu);
+}
- fputs_filtered (gdbarch_register_name (gdbarch, regnum), file);
- /* The problem with printing numeric register names (r26, etc.) is that
- the user can't use them on input. Probably the best solution is to
- fix it so that either the numeric or the funky (a2, etc.) names
- are accepted on input. */
- if (regnum < MIPS_NUMREGS)
- fprintf_filtered (file, "(r%d): ", regnum);
- else
- fprintf_filtered (file, ": ");
+static void
+set_mipsfpu_command (char *args, int from_tty)
+{
+ printf_unfiltered ("\"set mipsfpu\" must be followed by \"double\", "
+ "\"single\",\"none\" or \"auto\".\n");
+ show_mipsfpu_command (args, from_tty);
+}
+
+static void
+set_mipsfpu_single_command (char *args, int from_tty)
+{
+ struct gdbarch_info info;
+ gdbarch_info_init (&info);
+ mips_fpu_type = MIPS_FPU_SINGLE;
+ mips_fpu_type_auto = 0;
+ /* FIXME: cagney/2003-11-15: Should be setting a field in "info"
+ instead of relying on globals. Doing that would let generic code
+ handle the search for this specific architecture. */
+ if (!gdbarch_update_p (info))
+ internal_error (__FILE__, __LINE__, _("set mipsfpu failed"));
+}
+
+static void
+set_mipsfpu_double_command (char *args, int from_tty)
+{
+ struct gdbarch_info info;
+ gdbarch_info_init (&info);
+ mips_fpu_type = MIPS_FPU_DOUBLE;
+ mips_fpu_type_auto = 0;
+ /* FIXME: cagney/2003-11-15: Should be setting a field in "info"
+ instead of relying on globals. Doing that would let generic code
+ handle the search for this specific architecture. */
+ if (!gdbarch_update_p (info))
+ internal_error (__FILE__, __LINE__, _("set mipsfpu failed"));
+}
+
+static void
+set_mipsfpu_none_command (char *args, int from_tty)
+{
+ struct gdbarch_info info;
+ gdbarch_info_init (&info);
+ mips_fpu_type = MIPS_FPU_NONE;
+ mips_fpu_type_auto = 0;
+ /* FIXME: cagney/2003-11-15: Should be setting a field in "info"
+ instead of relying on globals. Doing that would let generic code
+ handle the search for this specific architecture. */
+ if (!gdbarch_update_p (info))
+ internal_error (__FILE__, __LINE__, _("set mipsfpu failed"));
+}
- get_formatted_print_options (&opts, 'x');
- val_print_scalar_formatted (value_type (val),
- value_contents_for_printing (val),
- value_embedded_offset (val),
- val,
- &opts, 0, file);
+static void
+set_mipsfpu_auto_command (char *args, int from_tty)
+{
+ mips_fpu_type_auto = 1;
}
-/* Replacement for generic do_registers_info.
- Print regs in pretty columns. */
+/* Attempt to identify the particular processor model by reading the
+ processor id. NOTE: cagney/2003-11-15: Firstly it isn't clear that
+ the relevant processor still exists (it dates back to '94) and
+ secondly this is not the way to do this. The processor type should
+ be set by forcing an architecture change. */
-static int
-print_fp_register_row (struct ui_file *file, struct frame_info *frame,
- int regnum)
+void
+deprecated_mips_set_processor_regs_hack (void)
{
- fprintf_filtered (file, " ");
- mips_print_fp_register (file, frame, regnum);
- fprintf_filtered (file, "\n");
- return regnum + 1;
+ struct regcache *regcache = get_current_regcache ();
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ ULONGEST prid;
+
+ regcache_cooked_read_unsigned (regcache, MIPS_PRID_REGNUM, &prid);
+ if ((prid & ~0xf) == 0x700)
+ tdep->mips_processor_reg_names = mips_r3041_reg_names;
}
+/* Just like reinit_frame_cache, but with the right arguments to be
+ callable as an sfunc. */
-/* Print a row's worth of GP (int) registers, with name labels above. */
+static void
+reinit_frame_cache_sfunc (char *args, int from_tty,
+ struct cmd_list_element *c)
+{
+ reinit_frame_cache ();
+}
static int
-print_gp_register_row (struct ui_file *file, struct frame_info *frame,
- int start_regnum)
+gdb_print_insn_mips (bfd_vma memaddr, struct disassemble_info *info)
{
- struct gdbarch *gdbarch = get_frame_arch (frame);
- /* Do values for GP (int) regs. */
- gdb_byte raw_buffer[MAX_REGISTER_SIZE];
- int ncols = (mips_abi_regsize (gdbarch) == 8 ? 4 : 8); /* display cols
- per row. */
- int col, byte;
- int regnum;
+ struct gdbarch *gdbarch = info->application_data;
- /* For GP registers, we print a separate row of names above the vals. */
- for (col = 0, regnum = start_regnum;
- col < ncols && regnum < gdbarch_num_regs (gdbarch)
- + gdbarch_num_pseudo_regs (gdbarch);
- regnum++)
- {
- if (*gdbarch_register_name (gdbarch, regnum) == '\0')
- continue; /* unused register */
- if (TYPE_CODE (register_type (gdbarch, regnum)) ==
- TYPE_CODE_FLT)
- break; /* End the row: reached FP register. */
- /* Large registers are handled separately. */
- if (register_size (gdbarch, regnum) > mips_abi_regsize (gdbarch))
- {
- if (col > 0)
- break; /* End the row before this register. */
+ /* FIXME: cagney/2003-06-26: Is this even necessary? The
+ disassembler needs to be able to locally determine the ISA, and
+ not rely on GDB. Otherwize the stand-alone 'objdump -d' will not
+ work. */
+ if (mips_pc_is_mips16 (gdbarch, memaddr))
+ info->mach = bfd_mach_mips16;
+ else if (mips_pc_is_micromips (gdbarch, memaddr))
+ info->mach = bfd_mach_mips_micromips;
- /* Print this register on a row by itself. */
- mips_print_register (file, frame, regnum);
- fprintf_filtered (file, "\n");
- return regnum + 1;
- }
- if (col == 0)
- fprintf_filtered (file, " ");
- fprintf_filtered (file,
- mips_abi_regsize (gdbarch) == 8 ? "%17s" : "%9s",
- gdbarch_register_name (gdbarch, regnum));
- col++;
- }
+ /* Round down the instruction address to the appropriate boundary. */
+ memaddr &= (info->mach == bfd_mach_mips16
+ || info->mach == bfd_mach_mips_micromips) ? ~1 : ~3;
- if (col == 0)
- return regnum;
+ /* Set the disassembler options. */
+ if (!info->disassembler_options)
+ /* This string is not recognized explicitly by the disassembler,
+ but it tells the disassembler to not try to guess the ABI from
+ the bfd elf headers, such that, if the user overrides the ABI
+ of a program linked as NewABI, the disassembly will follow the
+ register naming conventions specified by the user. */
+ info->disassembler_options = "gpr-names=32";
- /* Print the R0 to R31 names. */
- if ((start_regnum % gdbarch_num_regs (gdbarch)) < MIPS_NUMREGS)
- fprintf_filtered (file, "\n R%-4d",
- start_regnum % gdbarch_num_regs (gdbarch));
+ /* Call the appropriate disassembler based on the target endian-ness. */
+ if (info->endian == BFD_ENDIAN_BIG)
+ return print_insn_big_mips (memaddr, info);
else
- fprintf_filtered (file, "\n ");
+ return print_insn_little_mips (memaddr, info);
+}
- /* Now print the values in hex, 4 or 8 to the row. */
- for (col = 0, regnum = start_regnum;
- col < ncols && regnum < gdbarch_num_regs (gdbarch)
- + gdbarch_num_pseudo_regs (gdbarch);
- regnum++)
- {
- if (*gdbarch_register_name (gdbarch, regnum) == '\0')
- continue; /* unused register */
- if (TYPE_CODE (register_type (gdbarch, regnum)) ==
- TYPE_CODE_FLT)
- break; /* End row: reached FP register. */
- if (register_size (gdbarch, regnum) > mips_abi_regsize (gdbarch))
- break; /* End row: large register. */
+static int
+gdb_print_insn_mips_n32 (bfd_vma memaddr, struct disassemble_info *info)
+{
+ /* Set up the disassembler info, so that we get the right
+ register names from libopcodes. */
+ info->disassembler_options = "gpr-names=n32";
+ info->flavour = bfd_target_elf_flavour;
- /* OK: get the data in raw format. */
- if (!frame_register_read (frame, regnum, raw_buffer))
- error (_("can't read register %d (%s)"),
- regnum, gdbarch_register_name (gdbarch, regnum));
- /* pad small registers */
- for (byte = 0;
- byte < (mips_abi_regsize (gdbarch)
- - register_size (gdbarch, regnum)); byte++)
- printf_filtered (" ");
- /* Now print the register value in hex, endian order. */
- if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
- for (byte =
- register_size (gdbarch, regnum) - register_size (gdbarch, regnum);
- byte < register_size (gdbarch, regnum); byte++)
- fprintf_filtered (file, "%02x", raw_buffer[byte]);
- else
- for (byte = register_size (gdbarch, regnum) - 1;
- byte >= 0; byte--)
- fprintf_filtered (file, "%02x", raw_buffer[byte]);
- fprintf_filtered (file, " ");
- col++;
- }
- if (col > 0) /* ie. if we actually printed anything... */
- fprintf_filtered (file, "\n");
+ return gdb_print_insn_mips (memaddr, info);
+}
- return regnum;
+static int
+gdb_print_insn_mips_n64 (bfd_vma memaddr, struct disassemble_info *info)
+{
+ /* Set up the disassembler info, so that we get the right
+ register names from libopcodes. */
+ info->disassembler_options = "gpr-names=64";
+ info->flavour = bfd_target_elf_flavour;
+
+ return gdb_print_insn_mips (memaddr, info);
}
-/* MIPS_DO_REGISTERS_INFO(): called by "info register" command. */
+/* This function implements gdbarch_breakpoint_from_pc. It uses the
+ program counter value to determine whether a 16- or 32-bit breakpoint
+ should be used. It returns a pointer to a string of bytes that encode a
+ breakpoint instruction, stores the length of the string to *lenptr, and
+ adjusts pc (if necessary) to point to the actual memory location where
+ the breakpoint should be inserted. */
-static void
-mips_print_registers_info (struct gdbarch *gdbarch, struct ui_file *file,
- struct frame_info *frame, int regnum, int all)
+static const gdb_byte *
+mips_breakpoint_from_pc (struct gdbarch *gdbarch,
+ CORE_ADDR *pcptr, int *lenptr)
{
- if (regnum != -1) /* Do one specified register. */
+ CORE_ADDR pc = *pcptr;
+
+ if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
{
- gdb_assert (regnum >= gdbarch_num_regs (gdbarch));
- if (*(gdbarch_register_name (gdbarch, regnum)) == '\0')
- error (_("Not a valid register for the current processor type"));
+ if (mips_pc_is_mips16 (gdbarch, pc))
+ {
+ static gdb_byte mips16_big_breakpoint[] = { 0xe8, 0xa5 };
+ *pcptr = unmake_compact_addr (pc);
+ *lenptr = sizeof (mips16_big_breakpoint);
+ return mips16_big_breakpoint;
+ }
+ else if (mips_pc_is_micromips (gdbarch, pc))
+ {
+ static gdb_byte micromips16_big_breakpoint[] = { 0x46, 0x85 };
+ static gdb_byte micromips32_big_breakpoint[] = { 0, 0x5, 0, 0x7 };
+ ULONGEST insn;
+ int status;
+ int size;
+
+ insn = mips_fetch_instruction (gdbarch, ISA_MICROMIPS, pc, &status);
+ size = status ? 2
+ : mips_insn_size (ISA_MICROMIPS, insn) == 2 ? 2 : 4;
+ *pcptr = unmake_compact_addr (pc);
+ *lenptr = size;
+ return (size == 2) ? micromips16_big_breakpoint
+ : micromips32_big_breakpoint;
+ }
+ else
+ {
+ /* The IDT board uses an unusual breakpoint value, and
+ sometimes gets confused when it sees the usual MIPS
+ breakpoint instruction. */
+ static gdb_byte big_breakpoint[] = { 0, 0x5, 0, 0xd };
+ static gdb_byte pmon_big_breakpoint[] = { 0, 0, 0, 0xd };
+ static gdb_byte idt_big_breakpoint[] = { 0, 0, 0x0a, 0xd };
+ /* Likewise, IRIX appears to expect a different breakpoint,
+ although this is not apparent until you try to use pthreads. */
+ static gdb_byte irix_big_breakpoint[] = { 0, 0, 0, 0xd };
- mips_print_register (file, frame, regnum);
- fprintf_filtered (file, "\n");
+ *lenptr = sizeof (big_breakpoint);
+
+ if (strcmp (target_shortname, "mips") == 0)
+ return idt_big_breakpoint;
+ else if (strcmp (target_shortname, "ddb") == 0
+ || strcmp (target_shortname, "pmon") == 0
+ || strcmp (target_shortname, "lsi") == 0)
+ return pmon_big_breakpoint;
+ else if (gdbarch_osabi (gdbarch) == GDB_OSABI_IRIX)
+ return irix_big_breakpoint;
+ else
+ return big_breakpoint;
+ }
}
else
- /* Do all (or most) registers. */
{
- regnum = gdbarch_num_regs (gdbarch);
- while (regnum < gdbarch_num_regs (gdbarch)
- + gdbarch_num_pseudo_regs (gdbarch))
+ if (mips_pc_is_mips16 (gdbarch, pc))
{
- if (TYPE_CODE (register_type (gdbarch, regnum)) ==
- TYPE_CODE_FLT)
- {
- if (all) /* True for "INFO ALL-REGISTERS" command. */
- regnum = print_fp_register_row (file, frame, regnum);
- else
- regnum += MIPS_NUMREGS; /* Skip floating point regs. */
- }
+ static gdb_byte mips16_little_breakpoint[] = { 0xa5, 0xe8 };
+ *pcptr = unmake_compact_addr (pc);
+ *lenptr = sizeof (mips16_little_breakpoint);
+ return mips16_little_breakpoint;
+ }
+ else if (mips_pc_is_micromips (gdbarch, pc))
+ {
+ static gdb_byte micromips16_little_breakpoint[] = { 0x85, 0x46 };
+ static gdb_byte micromips32_little_breakpoint[] = { 0x5, 0, 0x7, 0 };
+ ULONGEST insn;
+ int status;
+ int size;
+
+ insn = mips_fetch_instruction (gdbarch, ISA_MICROMIPS, pc, &status);
+ size = status ? 2
+ : mips_insn_size (ISA_MICROMIPS, insn) == 2 ? 2 : 4;
+ *pcptr = unmake_compact_addr (pc);
+ *lenptr = size;
+ return (size == 2) ? micromips16_little_breakpoint
+ : micromips32_little_breakpoint;
+ }
+ else
+ {
+ static gdb_byte little_breakpoint[] = { 0xd, 0, 0x5, 0 };
+ static gdb_byte pmon_little_breakpoint[] = { 0xd, 0, 0, 0 };
+ static gdb_byte idt_little_breakpoint[] = { 0xd, 0x0a, 0, 0 };
+
+ *lenptr = sizeof (little_breakpoint);
+
+ if (strcmp (target_shortname, "mips") == 0)
+ return idt_little_breakpoint;
+ else if (strcmp (target_shortname, "ddb") == 0
+ || strcmp (target_shortname, "pmon") == 0
+ || strcmp (target_shortname, "lsi") == 0)
+ return pmon_little_breakpoint;
else
- regnum = print_gp_register_row (file, frame, regnum);
+ return little_breakpoint;
}
}
}
-/* Is this a branch with a delay slot? */
-
-static int
-is_delayed (unsigned long insn)
-{
- int i;
- for (i = 0; i < NUMOPCODES; ++i)
- if (mips_opcodes[i].pinfo != INSN_MACRO
- && (insn & mips_opcodes[i].mask) == mips_opcodes[i].match)
- break;
- return (i < NUMOPCODES
- && (mips_opcodes[i].pinfo & (INSN_UNCOND_BRANCH_DELAY
- | INSN_COND_BRANCH_DELAY
- | INSN_COND_BRANCH_LIKELY)));
-}
-
-static int
-mips_single_step_through_delay (struct gdbarch *gdbarch,
- struct frame_info *frame)
-{
- enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
- CORE_ADDR pc = get_frame_pc (frame);
- gdb_byte buf[MIPS_INSN32_SIZE];
+/* Determine the remote breakpoint kind suitable for the PC. The following
+ kinds are used:
- /* There is no branch delay slot on MIPS16. */
- if (mips_pc_is_mips16 (pc))
- return 0;
+ * 2 -- 16-bit MIPS16 mode breakpoint,
- if (!breakpoint_here_p (get_frame_address_space (frame), pc + 4))
- return 0;
+ * 3 -- 16-bit microMIPS mode breakpoint,
- if (!safe_frame_unwind_memory (frame, pc, buf, sizeof buf))
- /* If error reading memory, guess that it is not a delayed
- branch. */
- return 0;
- return is_delayed (extract_unsigned_integer (buf, sizeof buf, byte_order));
-}
+ * 4 -- 32-bit standard MIPS mode breakpoint,
-/* To skip prologues, I use this predicate. Returns either PC itself
- if the code at PC does not look like a function prologue; otherwise
- returns an address that (if we're lucky) follows the prologue. If
- LENIENT, then we must skip everything which is involved in setting
- up the frame (it's OK to skip more, just so long as we don't skip
- anything which might clobber the registers which are being saved.
- We must skip more in the case where part of the prologue is in the
- delay slot of a non-prologue instruction). */
+ * 5 -- 32-bit microMIPS mode breakpoint. */
-static CORE_ADDR
-mips_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
+static void
+mips_remote_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr,
+ int *kindptr)
{
- CORE_ADDR limit_pc;
- CORE_ADDR func_addr;
+ CORE_ADDR pc = *pcptr;
- /* See if we can determine the end of the prologue via the symbol table.
- If so, then return either PC, or the PC after the prologue, whichever
- is greater. */
- if (find_pc_partial_function (pc, NULL, &func_addr, NULL))
+ if (mips_pc_is_mips16 (gdbarch, pc))
{
- CORE_ADDR post_prologue_pc
- = skip_prologue_using_sal (gdbarch, func_addr);
- if (post_prologue_pc != 0)
- return max (pc, post_prologue_pc);
+ *pcptr = unmake_compact_addr (pc);
+ *kindptr = 2;
+ }
+ else if (mips_pc_is_micromips (gdbarch, pc))
+ {
+ ULONGEST insn;
+ int status;
+ int size;
+
+ insn = mips_fetch_instruction (gdbarch, ISA_MICROMIPS, pc, &status);
+ size = status ? 2 : mips_insn_size (ISA_MICROMIPS, insn) == 2 ? 2 : 4;
+ *pcptr = unmake_compact_addr (pc);
+ *kindptr = size | 1;
}
+ else
+ *kindptr = 4;
+}
- /* Can't determine prologue from the symbol table, need to examine
- instructions. */
+/* Return non-zero if the standard MIPS instruction INST has a branch
+ delay slot (i.e. it is a jump or branch instruction). This function
+ is based on mips32_next_pc. */
- /* Find an upper limit on the function prologue using the debug
- information. If the debug information could not be used to provide
- that bound, then use an arbitrary large number as the upper bound. */
- limit_pc = skip_prologue_using_sal (gdbarch, pc);
- if (limit_pc == 0)
- limit_pc = pc + 100; /* Magic. */
+static int
+mips32_instruction_has_delay_slot (struct gdbarch *gdbarch, ULONGEST inst)
+{
+ int op;
+ int rs;
+ int rt;
- if (mips_pc_is_mips16 (pc))
- return mips16_scan_prologue (gdbarch, pc, limit_pc, NULL, NULL);
+ op = itype_op (inst);
+ if ((inst & 0xe0000000) != 0)
+ {
+ rs = itype_rs (inst);
+ rt = itype_rt (inst);
+ return (is_octeon_bbit_op (op, gdbarch)
+ || op >> 2 == 5 /* BEQL, BNEL, BLEZL, BGTZL: bits 0101xx */
+ || op == 29 /* JALX: bits 011101 */
+ || (op == 17
+ && (rs == 8
+ /* BC1F, BC1FL, BC1T, BC1TL: 010001 01000 */
+ || (rs == 9 && (rt & 0x2) == 0)
+ /* BC1ANY2F, BC1ANY2T: bits 010001 01001 */
+ || (rs == 10 && (rt & 0x2) == 0))));
+ /* BC1ANY4F, BC1ANY4T: bits 010001 01010 */
+ }
else
- return mips32_scan_prologue (gdbarch, pc, limit_pc, NULL, NULL);
+ switch (op & 0x07) /* extract bits 28,27,26 */
+ {
+ case 0: /* SPECIAL */
+ op = rtype_funct (inst);
+ return (op == 8 /* JR */
+ || op == 9); /* JALR */
+ break; /* end SPECIAL */
+ case 1: /* REGIMM */
+ rs = itype_rs (inst);
+ rt = itype_rt (inst); /* branch condition */
+ return ((rt & 0xc) == 0
+ /* BLTZ, BLTZL, BGEZ, BGEZL: bits 000xx */
+ /* BLTZAL, BLTZALL, BGEZAL, BGEZALL: 100xx */
+ || ((rt & 0x1e) == 0x1c && rs == 0));
+ /* BPOSGE32, BPOSGE64: bits 1110x */
+ break; /* end REGIMM */
+ default: /* J, JAL, BEQ, BNE, BLEZ, BGTZ */
+ return 1;
+ break;
+ }
}
-/* Check whether the PC is in a function epilogue (32-bit version).
- This is a helper function for mips_in_function_epilogue_p. */
+/* Return non-zero if a standard MIPS instruction at ADDR has a branch
+ delay slot (i.e. it is a jump or branch instruction). */
+
static int
-mips32_in_function_epilogue_p (struct gdbarch *gdbarch, CORE_ADDR pc)
+mips32_insn_at_pc_has_delay_slot (struct gdbarch *gdbarch, CORE_ADDR addr)
{
- CORE_ADDR func_addr = 0, func_end = 0;
-
- if (find_pc_partial_function (pc, NULL, &func_addr, &func_end))
- {
- /* The MIPS epilogue is max. 12 bytes long. */
- CORE_ADDR addr = func_end - 12;
+ ULONGEST insn;
+ int status;
- if (addr < func_addr + 4)
- addr = func_addr + 4;
- if (pc < addr)
- return 0;
+ insn = mips_fetch_instruction (gdbarch, ISA_MIPS, addr, &status);
+ if (status)
+ return 0;
- for (; pc < func_end; pc += MIPS_INSN32_SIZE)
- {
- unsigned long high_word;
- unsigned long inst;
+ return mips32_instruction_has_delay_slot (gdbarch, insn);
+}
- inst = mips_fetch_instruction (gdbarch, pc);
- high_word = (inst >> 16) & 0xffff;
+/* Return non-zero if the microMIPS instruction INSN, comprising the
+ 16-bit major opcode word in the high 16 bits and any second word
+ in the low 16 bits, has a branch delay slot (i.e. it is a non-compact
+ jump or branch instruction). The instruction must be 32-bit if
+ MUSTBE32 is set or can be any instruction otherwise. */
- if (high_word != 0x27bd /* addiu $sp,$sp,offset */
- && high_word != 0x67bd /* daddiu $sp,$sp,offset */
- && inst != 0x03e00008 /* jr $ra */
- && inst != 0x00000000) /* nop */
- return 0;
- }
+static int
+micromips_instruction_has_delay_slot (ULONGEST insn, int mustbe32)
+{
+ ULONGEST major = insn >> 16;
+ switch (micromips_op (major))
+ {
+ /* 16-bit instructions. */
+ case 0x33: /* B16: bits 110011 */
+ case 0x2b: /* BNEZ16: bits 101011 */
+ case 0x23: /* BEQZ16: bits 100011 */
+ return !mustbe32;
+ case 0x11: /* POOL16C: bits 010001 */
+ return (!mustbe32
+ && ((b5s5_op (major) == 0xc
+ /* JR16: bits 010001 01100 */
+ || (b5s5_op (major) & 0x1e) == 0xe)));
+ /* JALR16, JALRS16: bits 010001 0111x */
+ /* 32-bit instructions. */
+ case 0x3d: /* JAL: bits 111101 */
+ case 0x3c: /* JALX: bits 111100 */
+ case 0x35: /* J: bits 110101 */
+ case 0x2d: /* BNE: bits 101101 */
+ case 0x25: /* BEQ: bits 100101 */
+ case 0x1d: /* JALS: bits 011101 */
return 1;
+ case 0x10: /* POOL32I: bits 010000 */
+ return ((b5s5_op (major) & 0x1c) == 0x0
+ /* BLTZ, BLTZAL, BGEZ, BGEZAL: 010000 000xx */
+ || (b5s5_op (major) & 0x1d) == 0x4
+ /* BLEZ, BGTZ: bits 010000 001x0 */
+ || (b5s5_op (major) & 0x1d) == 0x11
+ /* BLTZALS, BGEZALS: bits 010000 100x1 */
+ || ((b5s5_op (major) & 0x1e) == 0x14
+ && (major & 0x3) == 0x0)
+ /* BC2F, BC2T: bits 010000 1010x xxx00 */
+ || (b5s5_op (major) & 0x1e) == 0x1a
+ /* BPOSGE64, BPOSGE32: bits 010000 1101x */
+ || ((b5s5_op (major) & 0x1e) == 0x1c
+ && (major & 0x3) == 0x0)
+ /* BC1F, BC1T: bits 010000 1110x xxx00 */
+ || ((b5s5_op (major) & 0x1c) == 0x1c
+ && (major & 0x3) == 0x1));
+ /* BC1ANY*: bits 010000 111xx xxx01 */
+ case 0x0: /* POOL32A: bits 000000 */
+ return (b0s6_op (insn) == 0x3c
+ /* POOL32Axf: bits 000000 ... 111100 */
+ && (b6s10_ext (insn) & 0x2bf) == 0x3c);
+ /* JALR, JALR.HB: 000000 000x111100 111100 */
+ /* JALRS, JALRS.HB: 000000 010x111100 111100 */
+ default:
+ return 0;
}
-
- return 0;
}
-/* Check whether the PC is in a function epilogue (16-bit version).
- This is a helper function for mips_in_function_epilogue_p. */
+/* Return non-zero if a microMIPS instruction at ADDR has a branch delay
+ slot (i.e. it is a non-compact jump instruction). The instruction
+ must be 32-bit if MUSTBE32 is set or can be any instruction otherwise. */
+
static int
-mips16_in_function_epilogue_p (struct gdbarch *gdbarch, CORE_ADDR pc)
+micromips_insn_at_pc_has_delay_slot (struct gdbarch *gdbarch,
+ CORE_ADDR addr, int mustbe32)
{
- CORE_ADDR func_addr = 0, func_end = 0;
+ ULONGEST insn;
+ int status;
- if (find_pc_partial_function (pc, NULL, &func_addr, &func_end))
+ insn = mips_fetch_instruction (gdbarch, ISA_MICROMIPS, addr, &status);
+ if (status)
+ return 0;
+ insn <<= 16;
+ if (mips_insn_size (ISA_MICROMIPS, insn) == 2 * MIPS_INSN16_SIZE)
{
- /* The MIPS epilogue is max. 12 bytes long. */
- CORE_ADDR addr = func_end - 12;
+ insn |= mips_fetch_instruction (gdbarch, ISA_MICROMIPS, addr, &status);
+ if (status)
+ return 0;
+ }
- if (addr < func_addr + 4)
- addr = func_addr + 4;
- if (pc < addr)
- return 0;
+ return micromips_instruction_has_delay_slot (insn, mustbe32);
+}
- for (; pc < func_end; pc += MIPS_INSN16_SIZE)
- {
- unsigned short inst;
+/* Return non-zero if the MIPS16 instruction INST, which must be
+ a 32-bit instruction if MUSTBE32 is set or can be any instruction
+ otherwise, has a branch delay slot (i.e. it is a non-compact jump
+ instruction). This function is based on mips16_next_pc. */
- inst = mips_fetch_instruction (gdbarch, pc);
+static int
+mips16_instruction_has_delay_slot (unsigned short inst, int mustbe32)
+{
+ if ((inst & 0xf89f) == 0xe800) /* JR/JALR (16-bit instruction) */
+ return !mustbe32;
+ return (inst & 0xf800) == 0x1800; /* JAL/JALX (32-bit instruction) */
+}
- if ((inst & 0xf800) == 0xf000) /* extend */
- continue;
+/* Return non-zero if a MIPS16 instruction at ADDR has a branch delay
+ slot (i.e. it is a non-compact jump instruction). The instruction
+ must be 32-bit if MUSTBE32 is set or can be any instruction otherwise. */
- if (inst != 0x6300 /* addiu $sp,offset */
- && inst != 0xfb00 /* daddiu $sp,$sp,offset */
- && inst != 0xe820 /* jr $ra */
- && inst != 0xe8a0 /* jrc $ra */
- && inst != 0x6500) /* nop */
- return 0;
- }
+static int
+mips16_insn_at_pc_has_delay_slot (struct gdbarch *gdbarch,
+ CORE_ADDR addr, int mustbe32)
+{
+ unsigned short insn;
+ int status;
- return 1;
- }
+ insn = mips_fetch_instruction (gdbarch, ISA_MIPS16, addr, &status);
+ if (status)
+ return 0;
- return 0;
+ return mips16_instruction_has_delay_slot (insn, mustbe32);
}
-/* The epilogue is defined here as the area at the end of a function,
- after an instruction which destroys the function's stack frame. */
-static int
-mips_in_function_epilogue_p (struct gdbarch *gdbarch, CORE_ADDR pc)
+/* Calculate the starting address of the MIPS memory segment BPADDR is in.
+ This assumes KSSEG exists. */
+
+static CORE_ADDR
+mips_segment_boundary (CORE_ADDR bpaddr)
{
- if (mips_pc_is_mips16 (pc))
- return mips16_in_function_epilogue_p (gdbarch, pc);
+ CORE_ADDR mask = CORE_ADDR_MAX;
+ int segsize;
+
+ if (sizeof (CORE_ADDR) == 8)
+ /* Get the topmost two bits of bpaddr in a 32-bit safe manner (avoid
+ a compiler warning produced where CORE_ADDR is a 32-bit type even
+ though in that case this is dead code). */
+ switch (bpaddr >> ((sizeof (CORE_ADDR) << 3) - 2) & 3)
+ {
+ case 3:
+ if (bpaddr == (bfd_signed_vma) (int32_t) bpaddr)
+ segsize = 29; /* 32-bit compatibility segment */
+ else
+ segsize = 62; /* xkseg */
+ break;
+ case 2: /* xkphys */
+ segsize = 59;
+ break;
+ default: /* xksseg (1), xkuseg/kuseg (0) */
+ segsize = 62;
+ break;
+ }
+ else if (bpaddr & 0x80000000) /* kernel segment */
+ segsize = 29;
else
- return mips32_in_function_epilogue_p (gdbarch, pc);
+ segsize = 31; /* user segment */
+ mask <<= segsize;
+ return bpaddr & mask;
}
-/* Root of all "set mips "/"show mips " commands. This will eventually be
- used for all MIPS-specific commands. */
+/* Move the breakpoint at BPADDR out of any branch delay slot by shifting
+ it backwards if necessary. Return the address of the new location. */
-static void
-show_mips_command (char *args, int from_tty)
+static CORE_ADDR
+mips_adjust_breakpoint_address (struct gdbarch *gdbarch, CORE_ADDR bpaddr)
{
- help_list (showmipscmdlist, "show mips ", all_commands, gdb_stdout);
-}
+ CORE_ADDR prev_addr;
+ CORE_ADDR boundary;
+ CORE_ADDR func_addr;
-static void
-set_mips_command (char *args, int from_tty)
-{
- printf_unfiltered
- ("\"set mips\" must be followed by an appropriate subcommand.\n");
- help_list (setmipscmdlist, "set mips ", all_commands, gdb_stdout);
-}
+ /* If a breakpoint is set on the instruction in a branch delay slot,
+ GDB gets confused. When the breakpoint is hit, the PC isn't on
+ the instruction in the branch delay slot, the PC will point to
+ the branch instruction. Since the PC doesn't match any known
+ breakpoints, GDB reports a trap exception.
-/* Commands to show/set the MIPS FPU type. */
+ There are two possible fixes for this problem.
-static void
-show_mipsfpu_command (char *args, int from_tty)
-{
- char *fpu;
+ 1) When the breakpoint gets hit, see if the BD bit is set in the
+ Cause register (which indicates the last exception occurred in a
+ branch delay slot). If the BD bit is set, fix the PC to point to
+ the instruction in the branch delay slot.
- if (gdbarch_bfd_arch_info (target_gdbarch)->arch != bfd_arch_mips)
- {
- printf_unfiltered
- ("The MIPS floating-point coprocessor is unknown "
- "because the current architecture is not MIPS.\n");
- return;
- }
+ 2) When the user sets the breakpoint, don't allow him to set the
+ breakpoint on the instruction in the branch delay slot. Instead
+ move the breakpoint to the branch instruction (which will have
+ the same result).
- switch (MIPS_FPU_TYPE (target_gdbarch))
- {
- case MIPS_FPU_SINGLE:
- fpu = "single-precision";
- break;
- case MIPS_FPU_DOUBLE:
- fpu = "double-precision";
- break;
- case MIPS_FPU_NONE:
- fpu = "absent (none)";
- break;
- default:
- internal_error (__FILE__, __LINE__, _("bad switch"));
- }
- if (mips_fpu_type_auto)
- printf_unfiltered ("The MIPS floating-point coprocessor "
- "is set automatically (currently %s)\n",
- fpu);
- else
- printf_unfiltered
- ("The MIPS floating-point coprocessor is assumed to be %s\n", fpu);
-}
+ The problem with the first solution is that if the user then
+ single-steps the processor, the branch instruction will get
+ skipped (since GDB thinks the PC is on the instruction in the
+ branch delay slot).
+ So, we'll use the second solution. To do this we need to know if
+ the instruction we're trying to set the breakpoint on is in the
+ branch delay slot. */
-static void
-set_mipsfpu_command (char *args, int from_tty)
-{
- printf_unfiltered ("\"set mipsfpu\" must be followed by \"double\", "
- "\"single\",\"none\" or \"auto\".\n");
- show_mipsfpu_command (args, from_tty);
-}
+ boundary = mips_segment_boundary (bpaddr);
-static void
-set_mipsfpu_single_command (char *args, int from_tty)
-{
- struct gdbarch_info info;
- gdbarch_info_init (&info);
- mips_fpu_type = MIPS_FPU_SINGLE;
- mips_fpu_type_auto = 0;
- /* FIXME: cagney/2003-11-15: Should be setting a field in "info"
- instead of relying on globals. Doing that would let generic code
- handle the search for this specific architecture. */
- if (!gdbarch_update_p (info))
- internal_error (__FILE__, __LINE__, _("set mipsfpu failed"));
-}
+ /* Make sure we don't scan back before the beginning of the current
+ function, since we may fetch constant data or insns that look like
+ a jump. Of course we might do that anyway if the compiler has
+ moved constants inline. :-( */
+ if (find_pc_partial_function (bpaddr, NULL, &func_addr, NULL)
+ && func_addr > boundary && func_addr <= bpaddr)
+ boundary = func_addr;
-static void
-set_mipsfpu_double_command (char *args, int from_tty)
-{
- struct gdbarch_info info;
- gdbarch_info_init (&info);
- mips_fpu_type = MIPS_FPU_DOUBLE;
- mips_fpu_type_auto = 0;
- /* FIXME: cagney/2003-11-15: Should be setting a field in "info"
- instead of relying on globals. Doing that would let generic code
- handle the search for this specific architecture. */
- if (!gdbarch_update_p (info))
- internal_error (__FILE__, __LINE__, _("set mipsfpu failed"));
-}
+ if (mips_pc_is_mips (bpaddr))
+ {
+ if (bpaddr == boundary)
+ return bpaddr;
+
+ /* If the previous instruction has a branch delay slot, we have
+ to move the breakpoint to the branch instruction. */
+ prev_addr = bpaddr - 4;
+ if (mips32_insn_at_pc_has_delay_slot (gdbarch, prev_addr))
+ bpaddr = prev_addr;
+ }
+ else
+ {
+ int (*insn_at_pc_has_delay_slot) (struct gdbarch *, CORE_ADDR, int);
+ CORE_ADDR addr, jmpaddr;
+ int i;
+
+ boundary = unmake_compact_addr (boundary);
+
+ /* The only MIPS16 instructions with delay slots are JAL, JALX,
+ JALR and JR. An absolute JAL/JALX is always 4 bytes long,
+ so try for that first, then try the 2 byte JALR/JR.
+ The microMIPS ASE has a whole range of jumps and branches
+ with delay slots, some of which take 4 bytes and some take
+ 2 bytes, so the idea is the same.
+ FIXME: We have to assume that bpaddr is not the second half
+ of an extended instruction. */
+ insn_at_pc_has_delay_slot = (mips_pc_is_micromips (gdbarch, bpaddr)
+ ? micromips_insn_at_pc_has_delay_slot
+ : mips16_insn_at_pc_has_delay_slot);
+
+ jmpaddr = 0;
+ addr = bpaddr;
+ for (i = 1; i < 4; i++)
+ {
+ if (unmake_compact_addr (addr) == boundary)
+ break;
+ addr -= MIPS_INSN16_SIZE;
+ if (i == 1 && insn_at_pc_has_delay_slot (gdbarch, addr, 0))
+ /* Looks like a JR/JALR at [target-1], but it could be
+ the second word of a previous JAL/JALX, so record it
+ and check back one more. */
+ jmpaddr = addr;
+ else if (i > 1 && insn_at_pc_has_delay_slot (gdbarch, addr, 1))
+ {
+ if (i == 2)
+ /* Looks like a JAL/JALX at [target-2], but it could also
+ be the second word of a previous JAL/JALX, record it,
+ and check back one more. */
+ jmpaddr = addr;
+ else
+ /* Looks like a JAL/JALX at [target-3], so any previously
+ recorded JAL/JALX or JR/JALR must be wrong, because:
+
+ >-3: JAL
+ -2: JAL-ext (can't be JAL/JALX)
+ -1: bdslot (can't be JR/JALR)
+ 0: target insn
+
+ Of course it could be another JAL-ext which looks
+ like a JAL, but in that case we'd have broken out
+ of this loop at [target-2]:
+
+ -4: JAL
+ >-3: JAL-ext
+ -2: bdslot (can't be jmp)
+ -1: JR/JALR
+ 0: target insn */
+ jmpaddr = 0;
+ }
+ else
+ {
+ /* Not a jump instruction: if we're at [target-1] this
+ could be the second word of a JAL/JALX, so continue;
+ otherwise we're done. */
+ if (i > 1)
+ break;
+ }
+ }
-static void
-set_mipsfpu_none_command (char *args, int from_tty)
-{
- struct gdbarch_info info;
- gdbarch_info_init (&info);
- mips_fpu_type = MIPS_FPU_NONE;
- mips_fpu_type_auto = 0;
- /* FIXME: cagney/2003-11-15: Should be setting a field in "info"
- instead of relying on globals. Doing that would let generic code
- handle the search for this specific architecture. */
- if (!gdbarch_update_p (info))
- internal_error (__FILE__, __LINE__, _("set mipsfpu failed"));
+ if (jmpaddr)
+ bpaddr = jmpaddr;
+ }
+
+ return bpaddr;
}
-static void
-set_mipsfpu_auto_command (char *args, int from_tty)
+/* Return non-zero if SUFFIX is one of the numeric suffixes used for MIPS16
+ call stubs, one of 1, 2, 5, 6, 9, 10, or, if ZERO is non-zero, also 0. */
+
+static int
+mips_is_stub_suffix (const char *suffix, int zero)
+{
+ switch (suffix[0])
+ {
+ case '0':
+ return zero && suffix[1] == '\0';
+ case '1':
+ return suffix[1] == '\0' || (suffix[1] == '0' && suffix[2] == '\0');
+ case '2':
+ case '5':
+ case '6':
+ case '9':
+ return suffix[1] == '\0';
+ default:
+ return 0;
+ }
+}
+
+/* Return non-zero if MODE is one of the mode infixes used for MIPS16
+ call stubs, one of sf, df, sc, or dc. */
+
+static int
+mips_is_stub_mode (const char *mode)
{
- mips_fpu_type_auto = 1;
+ return ((mode[0] == 's' || mode[0] == 'd')
+ && (mode[1] == 'f' || mode[1] == 'c'));
}
-/* Attempt to identify the particular processor model by reading the
- processor id. NOTE: cagney/2003-11-15: Firstly it isn't clear that
- the relevant processor still exists (it dates back to '94) and
- secondly this is not the way to do this. The processor type should
- be set by forcing an architecture change. */
+/* Code at PC is a compiler-generated stub. Such a stub for a function
+ bar might have a name like __fn_stub_bar, and might look like this:
-void
-deprecated_mips_set_processor_regs_hack (void)
-{
- struct regcache *regcache = get_current_regcache ();
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
- struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
- ULONGEST prid;
+ mfc1 $4, $f13
+ mfc1 $5, $f12
+ mfc1 $6, $f15
+ mfc1 $7, $f14
- regcache_cooked_read_unsigned (regcache, MIPS_PRID_REGNUM, &prid);
- if ((prid & ~0xf) == 0x700)
- tdep->mips_processor_reg_names = mips_r3041_reg_names;
-}
+ followed by (or interspersed with):
-/* Just like reinit_frame_cache, but with the right arguments to be
- callable as an sfunc. */
+ j bar
-static void
-reinit_frame_cache_sfunc (char *args, int from_tty,
- struct cmd_list_element *c)
-{
- reinit_frame_cache ();
-}
+ or:
-static int
-gdb_print_insn_mips (bfd_vma memaddr, struct disassemble_info *info)
-{
- /* FIXME: cagney/2003-06-26: Is this even necessary? The
- disassembler needs to be able to locally determine the ISA, and
- not rely on GDB. Otherwize the stand-alone 'objdump -d' will not
- work. */
- if (mips_pc_is_mips16 (memaddr))
- info->mach = bfd_mach_mips16;
+ lui $25, %hi(bar)
+ addiu $25, $25, %lo(bar)
+ jr $25
- /* Round down the instruction address to the appropriate boundary. */
- memaddr &= (info->mach == bfd_mach_mips16 ? ~1 : ~3);
+ ($1 may be used in old code; for robustness we accept any register)
+ or, in PIC code:
- /* Set the disassembler options. */
- if (!info->disassembler_options)
- /* This string is not recognized explicitly by the disassembler,
- but it tells the disassembler to not try to guess the ABI from
- the bfd elf headers, such that, if the user overrides the ABI
- of a program linked as NewABI, the disassembly will follow the
- register naming conventions specified by the user. */
- info->disassembler_options = "gpr-names=32";
+ lui $28, %hi(_gp_disp)
+ addiu $28, $28, %lo(_gp_disp)
+ addu $28, $28, $25
+ lw $25, %got(bar)
+ addiu $25, $25, %lo(bar)
+ jr $25
- /* Call the appropriate disassembler based on the target endian-ness. */
- if (info->endian == BFD_ENDIAN_BIG)
- return print_insn_big_mips (memaddr, info);
- else
- return print_insn_little_mips (memaddr, info);
-}
+ In the case of a __call_stub_bar stub, the sequence to set up
+ arguments might look like this:
-static int
-gdb_print_insn_mips_n32 (bfd_vma memaddr, struct disassemble_info *info)
-{
- /* Set up the disassembler info, so that we get the right
- register names from libopcodes. */
- info->disassembler_options = "gpr-names=n32";
- info->flavour = bfd_target_elf_flavour;
+ mtc1 $4, $f13
+ mtc1 $5, $f12
+ mtc1 $6, $f15
+ mtc1 $7, $f14
- return gdb_print_insn_mips (memaddr, info);
-}
+ followed by (or interspersed with) one of the jump sequences above.
-static int
-gdb_print_insn_mips_n64 (bfd_vma memaddr, struct disassemble_info *info)
-{
- /* Set up the disassembler info, so that we get the right
- register names from libopcodes. */
- info->disassembler_options = "gpr-names=64";
- info->flavour = bfd_target_elf_flavour;
+ In the case of a __call_stub_fp_bar stub, JAL or JALR is used instead
+ of J or JR, respectively, followed by:
- return gdb_print_insn_mips (memaddr, info);
-}
+ mfc1 $2, $f0
+ mfc1 $3, $f1
+ jr $18
-/* This function implements gdbarch_breakpoint_from_pc. It uses the
- program counter value to determine whether a 16- or 32-bit breakpoint
- should be used. It returns a pointer to a string of bytes that encode a
- breakpoint instruction, stores the length of the string to *lenptr, and
- adjusts pc (if necessary) to point to the actual memory location where
- the breakpoint should be inserted. */
+ We are at the beginning of the stub here, and scan down and extract
+ the target address from the jump immediate instruction or, if a jump
+ register instruction is used, from the register referred. Return
+ the value of PC calculated or 0 if inconclusive.
-static const gdb_byte *
-mips_breakpoint_from_pc (struct gdbarch *gdbarch,
- CORE_ADDR *pcptr, int *lenptr)
+ The limit on the search is arbitrarily set to 20 instructions. FIXME. */
+
+static CORE_ADDR
+mips_get_mips16_fn_stub_pc (struct frame_info *frame, CORE_ADDR pc)
{
- if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ int addrreg = MIPS_ZERO_REGNUM;
+ CORE_ADDR start_pc = pc;
+ CORE_ADDR target_pc = 0;
+ CORE_ADDR addr = 0;
+ CORE_ADDR gp = 0;
+ int status = 0;
+ int i;
+
+ for (i = 0;
+ status == 0 && target_pc == 0 && i < 20;
+ i++, pc += MIPS_INSN32_SIZE)
{
- if (mips_pc_is_mips16 (*pcptr))
- {
- static gdb_byte mips16_big_breakpoint[] = { 0xe8, 0xa5 };
- *pcptr = unmake_mips16_addr (*pcptr);
- *lenptr = sizeof (mips16_big_breakpoint);
- return mips16_big_breakpoint;
- }
- else
+ ULONGEST inst = mips_fetch_instruction (gdbarch, ISA_MIPS, pc, NULL);
+ CORE_ADDR imm;
+ int rt;
+ int rs;
+ int rd;
+
+ switch (itype_op (inst))
{
- /* The IDT board uses an unusual breakpoint value, and
- sometimes gets confused when it sees the usual MIPS
- breakpoint instruction. */
- static gdb_byte big_breakpoint[] = { 0, 0x5, 0, 0xd };
- static gdb_byte pmon_big_breakpoint[] = { 0, 0, 0, 0xd };
- static gdb_byte idt_big_breakpoint[] = { 0, 0, 0x0a, 0xd };
- /* Likewise, IRIX appears to expect a different breakpoint,
- although this is not apparent until you try to use pthreads. */
- static gdb_byte irix_big_breakpoint[] = { 0, 0, 0, 0xd };
+ case 0: /* SPECIAL */
+ switch (rtype_funct (inst))
+ {
+ case 8: /* JR */
+ case 9: /* JALR */
+ rs = rtype_rs (inst);
+ if (rs == MIPS_GP_REGNUM)
+ target_pc = gp; /* Hmm... */
+ else if (rs == addrreg)
+ target_pc = addr;
+ break;
- *lenptr = sizeof (big_breakpoint);
+ case 0x21: /* ADDU */
+ rt = rtype_rt (inst);
+ rs = rtype_rs (inst);
+ rd = rtype_rd (inst);
+ if (rd == MIPS_GP_REGNUM
+ && ((rs == MIPS_GP_REGNUM && rt == MIPS_T9_REGNUM)
+ || (rs == MIPS_T9_REGNUM && rt == MIPS_GP_REGNUM)))
+ gp += start_pc;
+ break;
+ }
+ break;
- if (strcmp (target_shortname, "mips") == 0)
- return idt_big_breakpoint;
- else if (strcmp (target_shortname, "ddb") == 0
- || strcmp (target_shortname, "pmon") == 0
- || strcmp (target_shortname, "lsi") == 0)
- return pmon_big_breakpoint;
- else if (gdbarch_osabi (gdbarch) == GDB_OSABI_IRIX)
- return irix_big_breakpoint;
- else
- return big_breakpoint;
- }
- }
- else
- {
- if (mips_pc_is_mips16 (*pcptr))
- {
- static gdb_byte mips16_little_breakpoint[] = { 0xa5, 0xe8 };
- *pcptr = unmake_mips16_addr (*pcptr);
- *lenptr = sizeof (mips16_little_breakpoint);
- return mips16_little_breakpoint;
- }
- else
- {
- static gdb_byte little_breakpoint[] = { 0xd, 0, 0x5, 0 };
- static gdb_byte pmon_little_breakpoint[] = { 0xd, 0, 0, 0 };
- static gdb_byte idt_little_breakpoint[] = { 0xd, 0x0a, 0, 0 };
+ case 2: /* J */
+ case 3: /* JAL */
+ target_pc = jtype_target (inst) << 2;
+ target_pc += ((pc + 4) & ~(CORE_ADDR) 0x0fffffff);
+ break;
- *lenptr = sizeof (little_breakpoint);
+ case 9: /* ADDIU */
+ rt = itype_rt (inst);
+ rs = itype_rs (inst);
+ if (rt == rs)
+ {
+ imm = (itype_immediate (inst) ^ 0x8000) - 0x8000;
+ if (rt == MIPS_GP_REGNUM)
+ gp += imm;
+ else if (rt == addrreg)
+ addr += imm;
+ }
+ break;
- if (strcmp (target_shortname, "mips") == 0)
- return idt_little_breakpoint;
- else if (strcmp (target_shortname, "ddb") == 0
- || strcmp (target_shortname, "pmon") == 0
- || strcmp (target_shortname, "lsi") == 0)
- return pmon_little_breakpoint;
- else
- return little_breakpoint;
+ case 0xf: /* LUI */
+ rt = itype_rt (inst);
+ imm = ((itype_immediate (inst) ^ 0x8000) - 0x8000) << 16;
+ if (rt == MIPS_GP_REGNUM)
+ gp = imm;
+ else if (rt != MIPS_ZERO_REGNUM)
+ {
+ addrreg = rt;
+ addr = imm;
+ }
+ break;
+
+ case 0x23: /* LW */
+ rt = itype_rt (inst);
+ rs = itype_rs (inst);
+ imm = (itype_immediate (inst) ^ 0x8000) - 0x8000;
+ if (gp != 0 && rs == MIPS_GP_REGNUM)
+ {
+ gdb_byte buf[4];
+
+ memset (buf, 0, sizeof (buf));
+ status = target_read_memory (gp + imm, buf, sizeof (buf));
+ addrreg = rt;
+ addr = extract_signed_integer (buf, sizeof (buf), byte_order);
+ }
+ break;
}
}
+
+ return target_pc;
}
-/* If PC is in a mips16 call or return stub, return the address of the target
- PC, which is either the callee or the caller. There are several
+/* If PC is in a MIPS16 call or return stub, return the address of the
+ target PC, which is either the callee or the caller. There are several
cases which must be handled:
- * If the PC is in __mips16_ret_{d,s}f, this is a return stub and the
- target PC is in $31 ($ra).
+ * If the PC is in __mips16_ret_{d,s}{f,c}, this is a return stub
+ and the target PC is in $31 ($ra).
* If the PC is in __mips16_call_stub_{1..10}, this is a call stub
- and the target PC is in $2.
- * If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
- before the jal instruction, this is effectively a call stub
- and the target PC is in $2. Otherwise this is effectively
- a return stub and the target PC is in $18.
-
- See the source code for the stubs in gcc/config/mips/mips16.S for
+ and the target PC is in $2.
+ * If the PC at the start of __mips16_call_stub_{s,d}{f,c}_{0..10},
+ i.e. before the JALR instruction, this is effectively a call stub
+ and the target PC is in $2. Otherwise this is effectively
+ a return stub and the target PC is in $18.
+ * If the PC is at the start of __call_stub_fp_*, i.e. before the
+ JAL or JALR instruction, this is effectively a call stub and the
+ target PC is buried in the instruction stream. Otherwise this
+ is effectively a return stub and the target PC is in $18.
+ * If the PC is in __call_stub_* or in __fn_stub_*, this is a call
+ stub and the target PC is buried in the instruction stream.
+
+ See the source code for the stubs in gcc/config/mips/mips16.S, or the
+ stub builder in gcc/config/mips/mips.c (mips16_build_call_stub) for the
gory details. */
static CORE_ADDR
mips_skip_mips16_trampoline_code (struct frame_info *frame, CORE_ADDR pc)
{
struct gdbarch *gdbarch = get_frame_arch (frame);
- char *name;
CORE_ADDR start_addr;
+ const char *name;
+ size_t prefixlen;
/* Find the starting address and name of the function containing the PC. */
if (find_pc_partial_function (pc, &name, &start_addr, NULL) == 0)
return 0;
- /* If the PC is in __mips16_ret_{d,s}f, this is a return stub and the
- target PC is in $31 ($ra). */
- if (strcmp (name, "__mips16_ret_sf") == 0
- || strcmp (name, "__mips16_ret_df") == 0)
- return get_frame_register_signed (frame, MIPS_RA_REGNUM);
-
- if (strncmp (name, "__mips16_call_stub_", 19) == 0)
+ /* If the PC is in __mips16_ret_{d,s}{f,c}, this is a return stub
+ and the target PC is in $31 ($ra). */
+ prefixlen = strlen (mips_str_mips16_ret_stub);
+ if (strncmp (name, mips_str_mips16_ret_stub, prefixlen) == 0
+ && mips_is_stub_mode (name + prefixlen)
+ && name[prefixlen + 2] == '\0')
+ return get_frame_register_signed
+ (frame, gdbarch_num_regs (gdbarch) + MIPS_RA_REGNUM);
+
+ /* If the PC is in __mips16_call_stub_*, this is one of the call
+ call/return stubs. */
+ prefixlen = strlen (mips_str_mips16_call_stub);
+ if (strncmp (name, mips_str_mips16_call_stub, prefixlen) == 0)
{
/* If the PC is in __mips16_call_stub_{1..10}, this is a call stub
and the target PC is in $2. */
- if (name[19] >= '0' && name[19] <= '9')
- return get_frame_register_signed (frame, 2);
+ if (mips_is_stub_suffix (name + prefixlen, 0))
+ return get_frame_register_signed
+ (frame, gdbarch_num_regs (gdbarch) + MIPS_V0_REGNUM);
- /* If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
- before the jal instruction, this is effectively a call stub
+ /* If the PC at the start of __mips16_call_stub_{s,d}{f,c}_{0..10},
+ i.e. before the JALR instruction, this is effectively a call stub
and the target PC is in $2. Otherwise this is effectively
a return stub and the target PC is in $18. */
- else if (name[19] == 's' || name[19] == 'd')
+ else if (mips_is_stub_mode (name + prefixlen)
+ && name[prefixlen + 2] == '_'
+ && mips_is_stub_suffix (name + prefixlen + 3, 0))
{
if (pc == start_addr)
- {
- /* Check if the target of the stub is a compiler-generated
- stub. Such a stub for a function bar might have a name
- like __fn_stub_bar, and might look like this:
- mfc1 $4,$f13
- mfc1 $5,$f12
- mfc1 $6,$f15
- mfc1 $7,$f14
- la $1,bar (becomes a lui/addiu pair)
- jr $1
- So scan down to the lui/addi and extract the target
- address from those two instructions. */
-
- CORE_ADDR target_pc = get_frame_register_signed (frame, 2);
- ULONGEST inst;
- int i;
-
- /* See if the name of the target function is __fn_stub_*. */
- if (find_pc_partial_function (target_pc, &name, NULL, NULL) ==
- 0)
- return target_pc;
- if (strncmp (name, "__fn_stub_", 10) != 0
- && strcmp (name, "etext") != 0
- && strcmp (name, "_etext") != 0)
- return target_pc;
-
- /* Scan through this _fn_stub_ code for the lui/addiu pair.
- The limit on the search is arbitrarily set to 20
- instructions. FIXME. */
- for (i = 0, pc = 0; i < 20; i++, target_pc += MIPS_INSN32_SIZE)
- {
- inst = mips_fetch_instruction (gdbarch, target_pc);
- if ((inst & 0xffff0000) == 0x3c010000) /* lui $at */
- pc = (inst << 16) & 0xffff0000; /* high word */
- else if ((inst & 0xffff0000) == 0x24210000) /* addiu $at */
- return pc | (inst & 0xffff); /* low word */
- }
-
- /* Couldn't find the lui/addui pair, so return stub address. */
- return target_pc;
- }
+ /* This is the 'call' part of a call stub. The return
+ address is in $2. */
+ return get_frame_register_signed
+ (frame, gdbarch_num_regs (gdbarch) + MIPS_V0_REGNUM);
else
/* This is the 'return' part of a call stub. The return
- address is in $r18. */
- return get_frame_register_signed (frame, 18);
+ address is in $18. */
+ return get_frame_register_signed
+ (frame, gdbarch_num_regs (gdbarch) + MIPS_S2_REGNUM);
}
+ else
+ return 0; /* Not a stub. */
+ }
+
+ /* If the PC is in __call_stub_* or __fn_stub*, this is one of the
+ compiler-generated call or call/return stubs. */
+ if (strncmp (name, mips_str_fn_stub, strlen (mips_str_fn_stub)) == 0
+ || strncmp (name, mips_str_call_stub, strlen (mips_str_call_stub)) == 0)
+ {
+ if (pc == start_addr)
+ /* This is the 'call' part of a call stub. Call this helper
+ to scan through this code for interesting instructions
+ and determine the final PC. */
+ return mips_get_mips16_fn_stub_pc (frame, pc);
+ else
+ /* This is the 'return' part of a call stub. The return address
+ is in $18. */
+ return get_frame_register_signed
+ (frame, gdbarch_num_regs (gdbarch) + MIPS_S2_REGNUM);
}
- return 0; /* not a stub */
+
+ return 0; /* Not a stub. */
+}
+
+/* Return non-zero if the PC is inside a return thunk (aka stub or trampoline).
+ This implements the IN_SOLIB_RETURN_TRAMPOLINE macro. */
+
+static int
+mips_in_return_stub (struct gdbarch *gdbarch, CORE_ADDR pc, const char *name)
+{
+ CORE_ADDR start_addr;
+ size_t prefixlen;
+
+ /* Find the starting address of the function containing the PC. */
+ if (find_pc_partial_function (pc, NULL, &start_addr, NULL) == 0)
+ return 0;
+
+ /* If the PC is in __mips16_call_stub_{s,d}{f,c}_{0..10} but not at
+ the start, i.e. after the JALR instruction, this is effectively
+ a return stub. */
+ prefixlen = strlen (mips_str_mips16_call_stub);
+ if (pc != start_addr
+ && strncmp (name, mips_str_mips16_call_stub, prefixlen) == 0
+ && mips_is_stub_mode (name + prefixlen)
+ && name[prefixlen + 2] == '_'
+ && mips_is_stub_suffix (name + prefixlen + 3, 1))
+ return 1;
+
+ /* If the PC is in __call_stub_fp_* but not at the start, i.e. after
+ the JAL or JALR instruction, this is effectively a return stub. */
+ prefixlen = strlen (mips_str_call_fp_stub);
+ if (pc != start_addr
+ && strncmp (name, mips_str_call_fp_stub, prefixlen) == 0)
+ return 1;
+
+ /* Consume the .pic. prefix of any PIC stub, this function must return
+ true when the PC is in a PIC stub of a __mips16_ret_{d,s}{f,c} stub
+ or the call stub path will trigger in handle_inferior_event causing
+ it to go astray. */
+ prefixlen = strlen (mips_str_pic);
+ if (strncmp (name, mips_str_pic, prefixlen) == 0)
+ name += prefixlen;
+
+ /* If the PC is in __mips16_ret_{d,s}{f,c}, this is a return stub. */
+ prefixlen = strlen (mips_str_mips16_ret_stub);
+ if (strncmp (name, mips_str_mips16_ret_stub, prefixlen) == 0
+ && mips_is_stub_mode (name + prefixlen)
+ && name[prefixlen + 2] == '\0')
+ return 1;
+
+ return 0; /* Not a stub. */
}
/* If the current PC is the start of a non-PIC-to-PIC stub, return the
{
struct gdbarch *gdbarch = get_frame_arch (frame);
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
- struct minimal_symbol *msym;
+ struct bound_minimal_symbol msym;
int i;
gdb_byte stub_code[16];
int32_t stub_words[4];
instructions inserted before foo or a three instruction sequence
which jumps to foo. */
msym = lookup_minimal_symbol_by_pc (pc);
- if (msym == NULL
- || SYMBOL_VALUE_ADDRESS (msym) != pc
- || SYMBOL_LINKAGE_NAME (msym) == NULL
- || strncmp (SYMBOL_LINKAGE_NAME (msym), ".pic.", 5) != 0)
+ if (msym.minsym == NULL
+ || BMSYMBOL_VALUE_ADDRESS (msym) != pc
+ || MSYMBOL_LINKAGE_NAME (msym.minsym) == NULL
+ || strncmp (MSYMBOL_LINKAGE_NAME (msym.minsym), ".pic.", 5) != 0)
return 0;
/* A two-instruction header. */
- if (MSYMBOL_SIZE (msym) == 8)
+ if (MSYMBOL_SIZE (msym.minsym) == 8)
return pc + 8;
/* A three-instruction (plus delay slot) trampoline. */
- if (MSYMBOL_SIZE (msym) == 16)
+ if (MSYMBOL_SIZE (msym.minsym) == 16)
{
if (target_read_memory (pc, stub_code, 16) != 0)
return 0;
&& (stub_words[1] & 0xfc000000U) == 0x08000000
&& (stub_words[2] & 0xffff0000U) == 0x27390000
&& stub_words[3] == 0x00000000)
- return (((stub_words[0] & 0x0000ffff) << 16)
- + (stub_words[2] & 0x0000ffff));
+ return ((((stub_words[0] & 0x0000ffff) << 16)
+ + (stub_words[2] & 0x0000ffff)) ^ 0x8000) - 0x8000;
}
/* Not a recognized stub. */
static CORE_ADDR
mips_skip_trampoline_code (struct frame_info *frame, CORE_ADDR pc)
{
+ CORE_ADDR requested_pc = pc;
CORE_ADDR target_pc;
+ CORE_ADDR new_pc;
- target_pc = mips_skip_mips16_trampoline_code (frame, pc);
- if (target_pc)
- return target_pc;
+ do
+ {
+ target_pc = pc;
- target_pc = find_solib_trampoline_target (frame, pc);
- if (target_pc)
- return target_pc;
+ new_pc = mips_skip_mips16_trampoline_code (frame, pc);
+ if (new_pc)
+ pc = new_pc;
- target_pc = mips_skip_pic_trampoline_code (frame, pc);
- if (target_pc)
- return target_pc;
+ new_pc = find_solib_trampoline_target (frame, pc);
+ if (new_pc)
+ pc = new_pc;
- return 0;
+ new_pc = mips_skip_pic_trampoline_code (frame, pc);
+ if (new_pc)
+ pc = new_pc;
+ }
+ while (pc != target_pc);
+
+ return pc != requested_pc ? pc : 0;
}
/* Convert a dbx stab register number (from `r' declaration) to a GDB
regnum = mips_regnum (gdbarch)->hi;
else if (num == 71)
regnum = mips_regnum (gdbarch)->lo;
+ else if (mips_regnum (gdbarch)->dspacc != -1 && num >= 72 && num < 78)
+ regnum = num + mips_regnum (gdbarch)->dspacc - 72;
else
/* This will hopefully (eventually) provoke a warning. Should
we be calling complaint() here? */
regnum = mips_regnum (gdbarch)->hi;
else if (num == 65)
regnum = mips_regnum (gdbarch)->lo;
+ else if (mips_regnum (gdbarch)->dspacc != -1 && num >= 66 && num < 72)
+ regnum = num + mips_regnum (gdbarch)->dspacc - 66;
else
/* This will hopefully (eventually) provoke a warning. Should we
be calling complaint() here? */
internal_error (__FILE__, __LINE__, _("unknown ABI string"));
}
+/* Return the default compressed instruction set, either of MIPS16
+ or microMIPS, selected when none could have been determined from
+ the ELF header of the binary being executed (or no binary has been
+ selected. */
+
+static enum mips_isa
+global_mips_compression (void)
+{
+ int i;
+
+ for (i = 0; mips_compression_strings[i] != NULL; i++)
+ if (mips_compression_strings[i] == mips_compression_string)
+ return (enum mips_isa) i;
+
+ internal_error (__FILE__, __LINE__, _("unknown compressed ISA string"));
+}
+
static void
mips_register_g_packet_guesses (struct gdbarch *gdbarch)
{
int i, num_regs;
enum mips_fpu_type fpu_type;
struct tdesc_arch_data *tdesc_data = NULL;
- int elf_fpu_type = 0;
+ int elf_fpu_type = Val_GNU_MIPS_ABI_FP_ANY;
+ const char **reg_names;
+ struct mips_regnum mips_regnum, *regnum;
+ enum mips_isa mips_isa;
+ int dspacc;
+ int dspctl;
+
+ /* Fill in the OS dependent register numbers and names. */
+ if (info.osabi == GDB_OSABI_IRIX)
+ {
+ mips_regnum.fp0 = 32;
+ mips_regnum.pc = 64;
+ mips_regnum.cause = 65;
+ mips_regnum.badvaddr = 66;
+ mips_regnum.hi = 67;
+ mips_regnum.lo = 68;
+ mips_regnum.fp_control_status = 69;
+ mips_regnum.fp_implementation_revision = 70;
+ mips_regnum.dspacc = dspacc = -1;
+ mips_regnum.dspctl = dspctl = -1;
+ num_regs = 71;
+ reg_names = mips_irix_reg_names;
+ }
+ else if (info.osabi == GDB_OSABI_LINUX)
+ {
+ mips_regnum.fp0 = 38;
+ mips_regnum.pc = 37;
+ mips_regnum.cause = 36;
+ mips_regnum.badvaddr = 35;
+ mips_regnum.hi = 34;
+ mips_regnum.lo = 33;
+ mips_regnum.fp_control_status = 70;
+ mips_regnum.fp_implementation_revision = 71;
+ mips_regnum.dspacc = -1;
+ mips_regnum.dspctl = -1;
+ dspacc = 72;
+ dspctl = 78;
+ num_regs = 79;
+ reg_names = mips_linux_reg_names;
+ }
+ else
+ {
+ mips_regnum.lo = MIPS_EMBED_LO_REGNUM;
+ mips_regnum.hi = MIPS_EMBED_HI_REGNUM;
+ mips_regnum.badvaddr = MIPS_EMBED_BADVADDR_REGNUM;
+ mips_regnum.cause = MIPS_EMBED_CAUSE_REGNUM;
+ mips_regnum.pc = MIPS_EMBED_PC_REGNUM;
+ mips_regnum.fp0 = MIPS_EMBED_FP0_REGNUM;
+ mips_regnum.fp_control_status = 70;
+ mips_regnum.fp_implementation_revision = 71;
+ mips_regnum.dspacc = dspacc = -1;
+ mips_regnum.dspctl = dspctl = -1;
+ num_regs = MIPS_LAST_EMBED_REGNUM + 1;
+ if (info.bfd_arch_info != NULL
+ && info.bfd_arch_info->mach == bfd_mach_mips3900)
+ reg_names = mips_tx39_reg_names;
+ else
+ reg_names = mips_generic_reg_names;
+ }
/* Check any target description for validity. */
if (tdesc_has_registers (info.target_desc))
valid_p &= tdesc_numbered_register (feature, tdesc_data,
- MIPS_EMBED_LO_REGNUM, "lo");
+ mips_regnum.lo, "lo");
valid_p &= tdesc_numbered_register (feature, tdesc_data,
- MIPS_EMBED_HI_REGNUM, "hi");
+ mips_regnum.hi, "hi");
valid_p &= tdesc_numbered_register (feature, tdesc_data,
- MIPS_EMBED_PC_REGNUM, "pc");
+ mips_regnum.pc, "pc");
if (!valid_p)
{
valid_p = 1;
valid_p &= tdesc_numbered_register (feature, tdesc_data,
- MIPS_EMBED_BADVADDR_REGNUM,
- "badvaddr");
+ mips_regnum.badvaddr, "badvaddr");
valid_p &= tdesc_numbered_register (feature, tdesc_data,
MIPS_PS_REGNUM, "status");
valid_p &= tdesc_numbered_register (feature, tdesc_data,
- MIPS_EMBED_CAUSE_REGNUM, "cause");
+ mips_regnum.cause, "cause");
if (!valid_p)
{
valid_p = 1;
for (i = 0; i < 32; i++)
valid_p &= tdesc_numbered_register (feature, tdesc_data,
- i + MIPS_EMBED_FP0_REGNUM,
- mips_fprs[i]);
+ i + mips_regnum.fp0, mips_fprs[i]);
valid_p &= tdesc_numbered_register (feature, tdesc_data,
- MIPS_EMBED_FP0_REGNUM + 32, "fcsr");
- valid_p &= tdesc_numbered_register (feature, tdesc_data,
- MIPS_EMBED_FP0_REGNUM + 33, "fir");
+ mips_regnum.fp_control_status,
+ "fcsr");
+ valid_p
+ &= tdesc_numbered_register (feature, tdesc_data,
+ mips_regnum.fp_implementation_revision,
+ "fir");
if (!valid_p)
{
return NULL;
}
+ if (dspacc >= 0)
+ {
+ feature = tdesc_find_feature (info.target_desc,
+ "org.gnu.gdb.mips.dsp");
+ /* The DSP registers are optional; it's OK if they are absent. */
+ if (feature != NULL)
+ {
+ i = 0;
+ valid_p = 1;
+ valid_p &= tdesc_numbered_register (feature, tdesc_data,
+ dspacc + i++, "hi1");
+ valid_p &= tdesc_numbered_register (feature, tdesc_data,
+ dspacc + i++, "lo1");
+ valid_p &= tdesc_numbered_register (feature, tdesc_data,
+ dspacc + i++, "hi2");
+ valid_p &= tdesc_numbered_register (feature, tdesc_data,
+ dspacc + i++, "lo2");
+ valid_p &= tdesc_numbered_register (feature, tdesc_data,
+ dspacc + i++, "hi3");
+ valid_p &= tdesc_numbered_register (feature, tdesc_data,
+ dspacc + i++, "lo3");
+
+ valid_p &= tdesc_numbered_register (feature, tdesc_data,
+ dspctl, "dspctl");
+
+ if (!valid_p)
+ {
+ tdesc_data_cleanup (tdesc_data);
+ return NULL;
+ }
+
+ mips_regnum.dspacc = dspacc;
+ mips_regnum.dspctl = dspctl;
+ }
+ }
+
/* It would be nice to detect an attempt to use a 64-bit ABI
when only 32-bit registers are provided. */
+ reg_names = NULL;
}
/* First of all, extract the elf_flags, if available. */
fprintf_unfiltered (gdb_stdlog, "mips_gdbarch_init: mips_abi = %d\n",
mips_abi);
+ /* Determine the default compressed ISA. */
+ if ((elf_flags & EF_MIPS_ARCH_ASE_MICROMIPS) != 0
+ && (elf_flags & EF_MIPS_ARCH_ASE_M16) == 0)
+ mips_isa = ISA_MICROMIPS;
+ else if ((elf_flags & EF_MIPS_ARCH_ASE_M16) != 0
+ && (elf_flags & EF_MIPS_ARCH_ASE_MICROMIPS) == 0)
+ mips_isa = ISA_MIPS16;
+ else
+ mips_isa = global_mips_compression ();
+ mips_compression_string = mips_compression_strings[mips_isa];
+
/* Also used when doing an architecture lookup. */
if (gdbarch_debug)
fprintf_unfiltered (gdb_stdlog,
if (!mips_fpu_type_auto)
fpu_type = mips_fpu_type;
- else if (elf_fpu_type != 0)
+ else if (elf_fpu_type != Val_GNU_MIPS_ABI_FP_ANY)
{
switch (elf_fpu_type)
{
- case 1:
+ case Val_GNU_MIPS_ABI_FP_DOUBLE:
fpu_type = MIPS_FPU_DOUBLE;
break;
- case 2:
+ case Val_GNU_MIPS_ABI_FP_SINGLE:
fpu_type = MIPS_FPU_SINGLE;
break;
- case 3:
+ case Val_GNU_MIPS_ABI_FP_SOFT:
default:
/* Soft float or unknown. */
fpu_type = MIPS_FPU_NONE;
arches != NULL;
arches = gdbarch_list_lookup_by_info (arches->next, &info))
{
- /* MIPS needs to be pedantic about which ABI the object is
- using. */
+ /* MIPS needs to be pedantic about which ABI and the compressed
+ ISA variation the object is using. */
if (gdbarch_tdep (arches->gdbarch)->elf_flags != elf_flags)
continue;
if (gdbarch_tdep (arches->gdbarch)->mips_abi != mips_abi)
continue;
+ if (gdbarch_tdep (arches->gdbarch)->mips_isa != mips_isa)
+ continue;
/* Need to be pedantic about which register virtual size is
used. */
if (gdbarch_tdep (arches->gdbarch)->mips64_transfers_32bit_regs_p
tdep->mips64_transfers_32bit_regs_p = mips64_transfers_32bit_regs_p;
tdep->found_abi = found_abi;
tdep->mips_abi = mips_abi;
+ tdep->mips_isa = mips_isa;
tdep->mips_fpu_type = fpu_type;
tdep->register_size_valid_p = 0;
tdep->register_size = 0;
- tdep->gregset = NULL;
- tdep->gregset64 = NULL;
- tdep->fpregset = NULL;
- tdep->fpregset64 = NULL;
if (info.target_desc)
{
set_gdbarch_elf_make_msymbol_special (gdbarch,
mips_elf_make_msymbol_special);
-
- /* Fill in the OS dependant register numbers and names. */
- {
- const char **reg_names;
- struct mips_regnum *regnum = GDBARCH_OBSTACK_ZALLOC (gdbarch,
- struct mips_regnum);
- if (tdesc_has_registers (info.target_desc))
- {
- regnum->lo = MIPS_EMBED_LO_REGNUM;
- regnum->hi = MIPS_EMBED_HI_REGNUM;
- regnum->badvaddr = MIPS_EMBED_BADVADDR_REGNUM;
- regnum->cause = MIPS_EMBED_CAUSE_REGNUM;
- regnum->pc = MIPS_EMBED_PC_REGNUM;
- regnum->fp0 = MIPS_EMBED_FP0_REGNUM;
- regnum->fp_control_status = 70;
- regnum->fp_implementation_revision = 71;
- num_regs = MIPS_LAST_EMBED_REGNUM + 1;
- reg_names = NULL;
- }
- else if (info.osabi == GDB_OSABI_IRIX)
- {
- regnum->fp0 = 32;
- regnum->pc = 64;
- regnum->cause = 65;
- regnum->badvaddr = 66;
- regnum->hi = 67;
- regnum->lo = 68;
- regnum->fp_control_status = 69;
- regnum->fp_implementation_revision = 70;
- num_regs = 71;
- reg_names = mips_irix_reg_names;
- }
- else
- {
- regnum->lo = MIPS_EMBED_LO_REGNUM;
- regnum->hi = MIPS_EMBED_HI_REGNUM;
- regnum->badvaddr = MIPS_EMBED_BADVADDR_REGNUM;
- regnum->cause = MIPS_EMBED_CAUSE_REGNUM;
- regnum->pc = MIPS_EMBED_PC_REGNUM;
- regnum->fp0 = MIPS_EMBED_FP0_REGNUM;
- regnum->fp_control_status = 70;
- regnum->fp_implementation_revision = 71;
- num_regs = 90;
- if (info.bfd_arch_info != NULL
- && info.bfd_arch_info->mach == bfd_mach_mips3900)
- reg_names = mips_tx39_reg_names;
- else
- reg_names = mips_generic_reg_names;
- }
- /* FIXME: cagney/2003-11-15: For MIPS, hasn't gdbarch_pc_regnum been
- replaced by gdbarch_read_pc? */
- set_gdbarch_pc_regnum (gdbarch, regnum->pc + num_regs);
- set_gdbarch_sp_regnum (gdbarch, MIPS_SP_REGNUM + num_regs);
- set_gdbarch_fp0_regnum (gdbarch, regnum->fp0);
- set_gdbarch_num_regs (gdbarch, num_regs);
- set_gdbarch_num_pseudo_regs (gdbarch, num_regs);
- set_gdbarch_register_name (gdbarch, mips_register_name);
- set_gdbarch_virtual_frame_pointer (gdbarch, mips_virtual_frame_pointer);
- tdep->mips_processor_reg_names = reg_names;
- tdep->regnum = regnum;
- }
+ set_gdbarch_make_symbol_special (gdbarch, mips_make_symbol_special);
+ set_gdbarch_adjust_dwarf2_addr (gdbarch, mips_adjust_dwarf2_addr);
+ set_gdbarch_adjust_dwarf2_line (gdbarch, mips_adjust_dwarf2_line);
+
+ regnum = GDBARCH_OBSTACK_ZALLOC (gdbarch, struct mips_regnum);
+ *regnum = mips_regnum;
+ set_gdbarch_fp0_regnum (gdbarch, regnum->fp0);
+ set_gdbarch_num_regs (gdbarch, num_regs);
+ set_gdbarch_num_pseudo_regs (gdbarch, num_regs);
+ set_gdbarch_register_name (gdbarch, mips_register_name);
+ set_gdbarch_virtual_frame_pointer (gdbarch, mips_virtual_frame_pointer);
+ tdep->mips_processor_reg_names = reg_names;
+ tdep->regnum = regnum;
switch (mips_abi)
{
/* MIPS version of CALL_DUMMY. */
- /* NOTE: cagney/2003-08-05: Eventually call dummy location will be
- replaced by a command, and all targets will default to on stack
- (regardless of the stack's execute status). */
- set_gdbarch_call_dummy_location (gdbarch, AT_SYMBOL);
+ set_gdbarch_call_dummy_location (gdbarch, ON_STACK);
+ set_gdbarch_push_dummy_code (gdbarch, mips_push_dummy_code);
set_gdbarch_frame_align (gdbarch, mips_frame_align);
set_gdbarch_convert_register_p (gdbarch, mips_convert_register_p);
set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
set_gdbarch_breakpoint_from_pc (gdbarch, mips_breakpoint_from_pc);
+ set_gdbarch_remote_breakpoint_from_pc (gdbarch,
+ mips_remote_breakpoint_from_pc);
+ set_gdbarch_adjust_breakpoint_address (gdbarch,
+ mips_adjust_breakpoint_address);
set_gdbarch_skip_prologue (gdbarch, mips_skip_prologue);
set_gdbarch_skip_trampoline_code (gdbarch, mips_skip_trampoline_code);
+ /* NOTE drow/2012-04-25: We overload the core solib trampoline code
+ to support MIPS16. This is a bad thing. Make sure not to do it
+ if we have an OS ABI that actually supports shared libraries, since
+ shared library support is more important. If we have an OS someday
+ that supports both shared libraries and MIPS16, we'll have to find
+ a better place for these.
+ macro/2012-04-25: But that applies to return trampolines only and
+ currently no MIPS OS ABI uses shared libraries that have them. */
+ set_gdbarch_in_solib_return_trampoline (gdbarch, mips_in_return_stub);
+
set_gdbarch_single_step_through_delay (gdbarch,
mips_single_step_through_delay);
info.tdep_info = (void *) tdesc_data;
gdbarch_init_osabi (info, gdbarch);
+ /* The hook may have adjusted num_regs, fetch the final value and
+ set pc_regnum and sp_regnum now that it has been fixed. */
+ num_regs = gdbarch_num_regs (gdbarch);
+ set_gdbarch_pc_regnum (gdbarch, regnum->pc + num_regs);
+ set_gdbarch_sp_regnum (gdbarch, MIPS_SP_REGNUM + num_regs);
+
/* Unwind the frame. */
dwarf2_append_unwinders (gdbarch);
frame_unwind_append_unwinder (gdbarch, &mips_stub_frame_unwind);
frame_unwind_append_unwinder (gdbarch, &mips_insn16_frame_unwind);
+ frame_unwind_append_unwinder (gdbarch, &mips_micro_frame_unwind);
frame_unwind_append_unwinder (gdbarch, &mips_insn32_frame_unwind);
frame_base_append_sniffer (gdbarch, dwarf2_frame_base_sniffer);
frame_base_append_sniffer (gdbarch, mips_stub_frame_base_sniffer);
frame_base_append_sniffer (gdbarch, mips_insn16_frame_base_sniffer);
+ frame_base_append_sniffer (gdbarch, mips_micro_frame_base_sniffer);
frame_base_append_sniffer (gdbarch, mips_insn32_frame_base_sniffer);
if (tdesc_data)
struct cmd_list_element *ignored_cmd,
const char *ignored_value)
{
- if (gdbarch_bfd_arch_info (target_gdbarch)->arch != bfd_arch_mips)
+ if (gdbarch_bfd_arch_info (target_gdbarch ())->arch != bfd_arch_mips)
fprintf_filtered
(file,
"The MIPS ABI is unknown because the current architecture "
else
{
enum mips_abi global_abi = global_mips_abi ();
- enum mips_abi actual_abi = mips_abi (target_gdbarch);
+ enum mips_abi actual_abi = mips_abi (target_gdbarch ());
const char *actual_abi_str = mips_abi_strings[actual_abi];
if (global_abi == MIPS_ABI_UNKNOWN)
}
}
+/* Print out which MIPS compressed ISA encoding is used. */
+
+static void
+show_mips_compression (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("The compressed ISA encoding used is %s.\n"),
+ value);
+}
+
static void
mips_dump_tdep (struct gdbarch *gdbarch, struct ui_file *file)
{
show_mips_abi,
&setmipscmdlist, &showmipscmdlist);
+ /* Allow the user to set the ISA to assume for compressed code if ELF
+ file flags don't tell or there is no program file selected. This
+ setting is updated whenever unambiguous ELF file flags are interpreted,
+ and carried over to subsequent sessions. */
+ add_setshow_enum_cmd ("compression", class_obscure, mips_compression_strings,
+ &mips_compression_string, _("\
+Set the compressed ISA encoding used by MIPS code."), _("\
+Show the compressed ISA encoding used by MIPS code."), _("\
+Select the compressed ISA encoding used in functions that have no symbol\n\
+information available. The encoding can be set to either of:\n\
+ mips16\n\
+ micromips\n\
+and is updated automatically from ELF file flags if available."),
+ mips_abi_update,
+ show_mips_compression,
+ &setmipscmdlist, &showmipscmdlist);
+
/* Let the user turn off floating point and set the fence post for
heuristic_proc_start. */
&setlist, &showlist);
/* Debug this files internals. */
- add_setshow_zinteger_cmd ("mips", class_maintenance,
- &mips_debug, _("\
+ add_setshow_zuinteger_cmd ("mips", class_maintenance,
+ &mips_debug, _("\
Set mips debugging."), _("\
Show mips debugging."), _("\
When non-zero, mips specific debugging is enabled."),
- NULL,
- NULL, /* FIXME: i18n: Mips debugging is
- currently %s. */
- &setdebuglist, &showdebuglist);
+ NULL,
+ NULL, /* FIXME: i18n: Mips debugging is
+ currently %s. */
+ &setdebuglist, &showdebuglist);
}
projects / deliverable / binutils-gdb.git / blobdiff