/* Target-dependent code for the MIPS architecture, for GDB, the GNU Debugger.
- Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
- 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software
- Foundation, Inc.
+ Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
+ 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
+ Free Software Foundation, Inc.
Contributed by Alessandro Forin(af@cs.cmu.edu) at CMU
and by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
#include "defs.h"
#include "gdb_string.h"
#include "trad-frame.h"
#include "infcall.h"
#include "floatformat.h"
+#include "remote.h"
+#include "target-descriptions.h"
static const struct objfile_data *mips_pdr_data;
static struct type *mips_register_type (struct gdbarch *gdbarch, int regnum);
-/* A useful bit in the CP0 status register (PS_REGNUM). */
+/* A useful bit in the CP0 status register (MIPS_PS_REGNUM). */
/* This bit is set if we are emulating 32-bit FPRs on a 64-bit chip. */
#define ST0_FR (1 << 26)
NULL
};
-struct frame_extra_info
-{
- mips_extra_func_info_t proc_desc;
- int num_args;
-};
-
/* Various MIPS ISA options (related to stack analysis) can be
overridden dynamically. Establish an enum/array for managing
them. */
static int mips_debug = 0;
+/* Properties (for struct target_desc) describing the g/G packet
+ layout. */
+#define PROPERTY_GP32 "internal: transfers-32bit-registers"
+#define PROPERTY_GP64 "internal: transfers-64bit-registers"
+
/* MIPS specific per-architecture information */
struct gdbarch_tdep
{
const struct mips_regnum *regnum;
/* Register names table for the current register set. */
const char **mips_processor_reg_names;
+
+ /* The size of register data available from the target, if known.
+ This doesn't quite obsolete the manual
+ mips64_transfers_32bit_regs_p, since that is documented to force
+ left alignment even for big endian (very strange). */
+ int register_size_valid_p;
+ int register_size;
};
static int
n32n64_floatformat_always_valid (const struct floatformat *fmt,
- const char *from)
+ const void *from)
{
return 1;
}
{
floatformat_big, 128, 0, 1, 11, 1023, 2047, 12, 52,
floatformat_intbit_no,
- "floatformat_ieee_double_big",
+ "floatformat_n32n64_long_double_big",
n32n64_floatformat_always_valid
};
+static const struct floatformat *floatformats_n32n64_long[BFD_ENDIAN_UNKNOWN] =
+{
+ &floatformat_n32n64_long_double_big,
+ &floatformat_n32n64_long_double_big
+};
+
const struct mips_regnum *
mips_regnum (struct gdbarch *gdbarch)
{
return ((addr) & 1);
}
-static CORE_ADDR
-make_mips16_addr (CORE_ADDR addr)
-{
- return ((addr) | 1);
-}
-
static CORE_ADDR
unmake_mips16_addr (CORE_ADDR addr)
{
- return ((addr) & ~1);
+ return ((addr) & ~(CORE_ADDR) 1);
}
/* Return the contents of register REGNUM as a signed integer. */
int
mips_isa_regsize (struct gdbarch *gdbarch)
{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
+ /* If we know how big the registers are, use that size. */
+ if (tdep->register_size_valid_p)
+ return tdep->register_size;
+
+ /* Fall back to the previous behavior. */
return (gdbarch_bfd_arch_info (gdbarch)->bits_per_word
/ gdbarch_bfd_arch_info (gdbarch)->bits_per_byte);
}
static const char *mips_abi_regsize_string = size_auto;
-static unsigned int
+unsigned int
mips_abi_regsize (struct gdbarch *gdbarch)
{
if (mips_abi_regsize_string == size_auto)
case MIPS_ABI_UNKNOWN:
case MIPS_ABI_LAST:
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
else if (mips_abi_regsize_string == size_64)
return 8;
static void
mips_xfer_register (struct regcache *regcache, int reg_num, int length,
- enum bfd_endian endian, bfd_byte * in,
- const bfd_byte * out, int buf_offset)
+ enum bfd_endian endian, gdb_byte *in,
+ const gdb_byte *out, int buf_offset)
{
int reg_offset = 0;
gdb_assert (reg_num >= NUM_REGS);
reg_offset = 0;
break;
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
if (mips_debug)
fprintf_unfiltered (gdb_stderr,
/* Otherwise check the FR bit in the status register - it controls
the FP compatiblity mode. If it is clear we are in compatibility
mode. */
- if ((read_register (PS_REGNUM) & ST0_FR) == 0)
+ if ((read_register (MIPS_PS_REGNUM) & ST0_FR) == 0)
return 1;
#endif
#define VM_MIN_ADDRESS (CORE_ADDR)0x400000
-struct mips_frame_cache;
-static mips_extra_func_info_t heuristic_proc_desc (CORE_ADDR, CORE_ADDR,
- struct frame_info *,
- struct mips_frame_cache *);
-static mips_extra_func_info_t non_heuristic_proc_desc (CORE_ADDR pc,
- CORE_ADDR *addrptr);
-
static CORE_ADDR heuristic_proc_start (CORE_ADDR);
static CORE_ADDR read_next_frame_reg (struct frame_info *, int);
static void reinit_frame_cache_sfunc (char *, int, struct cmd_list_element *);
-static CORE_ADDR after_prologue (CORE_ADDR pc);
-
static struct type *mips_float_register_type (void);
static struct type *mips_double_register_type (void);
}
else
internal_error (__FILE__, __LINE__,
- "mips_register_name: bad register number %d", rawnum);
+ _("mips_register_name: bad register number %d"), rawnum);
}
/* Return the groups that a MIPS register can be categorised into. */
static void
mips_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache,
- int cookednum, void *buf)
+ int cookednum, gdb_byte *buf)
{
int rawnum = cookednum % NUM_REGS;
gdb_assert (cookednum >= NUM_REGS && cookednum < 2 * NUM_REGS);
regcache_raw_read_part (regcache, rawnum, 4, 4, buf);
}
else
- internal_error (__FILE__, __LINE__, "bad register size");
+ internal_error (__FILE__, __LINE__, _("bad register size"));
}
static void
mips_pseudo_register_write (struct gdbarch *gdbarch,
struct regcache *regcache, int cookednum,
- const void *buf)
+ const gdb_byte *buf)
{
int rawnum = cookednum % NUM_REGS;
gdb_assert (cookednum >= NUM_REGS && cookednum < 2 * NUM_REGS);
regcache_raw_write_part (regcache, rawnum, 4, 4, buf);
}
else
- internal_error (__FILE__, __LINE__, "bad register size");
+ internal_error (__FILE__, __LINE__, _("bad register size"));
}
/* Table to translate MIPS16 register field to actual register number. */
static unsigned int heuristic_fence_post = 0;
-#define PROC_LOW_ADDR(proc) ((proc)->pdr.adr) /* least address */
-#define PROC_HIGH_ADDR(proc) ((proc)->high_addr) /* upper address bound */
-#define PROC_FRAME_OFFSET(proc) ((proc)->pdr.frameoffset)
-#define PROC_FRAME_REG(proc) ((proc)->pdr.framereg)
-#define PROC_FRAME_ADJUST(proc) ((proc)->frame_adjust)
-#define PROC_REG_MASK(proc) ((proc)->pdr.regmask)
-#define PROC_FREG_MASK(proc) ((proc)->pdr.fregmask)
-#define PROC_REG_OFFSET(proc) ((proc)->pdr.regoffset)
-#define PROC_FREG_OFFSET(proc) ((proc)->pdr.fregoffset)
-#define PROC_PC_REG(proc) ((proc)->pdr.pcreg)
-/* FIXME drow/2002-06-10: If a pointer on the host is bigger than a long,
- this will corrupt pdr.iline. Fortunately we don't use it. */
-#define PROC_SYMBOL(proc) (*(struct symbol**)&(proc)->pdr.isym)
-#define _PROC_MAGIC_ 0x0F0F0F0F
-
/* Number of bytes of storage in the actual machine representation for
register N. NOTE: This defines the pseudo register type so need to
rebuild the architecture vector. */
if (!gdbarch_update_p (info))
{
mips64_transfers_32bit_regs_p = 0;
- error ("32-bit compatibility mode not supported");
+ error (_("32-bit compatibility mode not supported"));
}
}
static void
mips_register_to_value (struct frame_info *frame, int regnum,
- struct type *type, void *to)
+ struct type *type, gdb_byte *to)
{
- get_frame_register (frame, regnum + 0, (char *) to + 4);
- get_frame_register (frame, regnum + 1, (char *) to + 0);
+ get_frame_register (frame, regnum + 0, to + 4);
+ get_frame_register (frame, regnum + 1, to + 0);
}
static void
mips_value_to_register (struct frame_info *frame, int regnum,
- struct type *type, const void *from)
+ struct type *type, const gdb_byte *from)
{
- put_frame_register (frame, regnum + 0, (const char *) from + 4);
- put_frame_register (frame, regnum + 1, (const char *) from + 0);
+ put_frame_register (frame, regnum + 0, from + 4);
+ put_frame_register (frame, regnum + 1, from + 0);
}
/* Return the GDB type object for the "standard" data type of data in
{
/* The floating-point registers raw, or cooked, always match
mips_isa_regsize(), and also map 1:1, byte for byte. */
- switch (gdbarch_byte_order (gdbarch))
- {
- case BFD_ENDIAN_BIG:
- if (mips_isa_regsize (gdbarch) == 4)
- return builtin_type_ieee_single_big;
- else
- return builtin_type_ieee_double_big;
- case BFD_ENDIAN_LITTLE:
- if (mips_isa_regsize (gdbarch) == 4)
- return builtin_type_ieee_single_little;
- else
- return builtin_type_ieee_double_little;
- case BFD_ENDIAN_UNKNOWN:
- default:
- internal_error (__FILE__, __LINE__, "bad switch");
- }
+ if (mips_isa_regsize (gdbarch) == 4)
+ return builtin_type_ieee_single;
+ else
+ return builtin_type_ieee_double;
}
else if (regnum < NUM_REGS)
{
the ABI (with a few complications). */
if (regnum >= (NUM_REGS
+ mips_regnum (current_gdbarch)->fp_control_status)
- && regnum <= NUM_REGS + LAST_EMBED_REGNUM)
+ && regnum <= NUM_REGS + MIPS_LAST_EMBED_REGNUM)
/* The pseudo/cooked view of the embedded registers is always
32-bit. The raw view is handled below. */
return builtin_type_int32;
case AUTO_BOOLEAN_AUTO:
return tdep->default_mask_address_p;
default:
- internal_error (__FILE__, __LINE__, "mips_mask_address_p: bad switch");
+ internal_error (__FILE__, __LINE__, _("mips_mask_address_p: bad switch"));
return -1;
}
}
static void
-show_mask_address (char *cmd, int from_tty, struct cmd_list_element *c)
+show_mask_address (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+
+ deprecated_show_value_hack (file, from_tty, c, value);
switch (mask_address_var)
{
case AUTO_BOOLEAN_TRUE:
mips_mask_address_p (tdep) ? "enabled" : "disabled");
break;
default:
- internal_error (__FILE__, __LINE__, "show_mask_address: bad switch");
+ internal_error (__FILE__, __LINE__, _("show_mask_address: bad switch"));
break;
}
}
write_register_pid (mips_regnum (current_gdbarch)->pc, pc, ptid);
}
-/* This returns the PC of the first inst after the prologue. If we can't
- find the prologue, then return 0. */
-
-static CORE_ADDR
-after_prologue (CORE_ADDR pc)
-{
- mips_extra_func_info_t proc_desc;
- struct symtab_and_line sal;
- CORE_ADDR func_addr, func_end;
- CORE_ADDR startaddr = 0;
-
- /* Pass a NULL next_frame to heuristic_proc_desc. We should not
- attempt to read the stack pointer from the current machine state,
- because the current machine state has nothing to do with the
- information we need from the proc_desc; and the process may or
- may not exist right now. */
- proc_desc = non_heuristic_proc_desc (pc, &startaddr);
- if (proc_desc)
- {
- /* IF this is the topmost frame AND (this proc does not have
- debugging information OR the PC is in the procedure prologue)
- THEN create a "heuristic" proc_desc (by analyzing the actual
- code) to replace the "official" proc_desc. */
- struct symtab_and_line val;
- if (PROC_SYMBOL (proc_desc))
- {
- val = find_pc_line (BLOCK_START
- (SYMBOL_BLOCK_VALUE (PROC_SYMBOL (proc_desc))),
- 0);
- val.pc = val.end ? val.end : pc;
- }
- if (!PROC_SYMBOL (proc_desc) || pc < val.pc)
- {
- mips_extra_func_info_t found_heuristic =
- heuristic_proc_desc (PROC_LOW_ADDR (proc_desc), pc, NULL, NULL);
- if (found_heuristic)
- proc_desc = found_heuristic;
- }
- }
- else
- {
- if (startaddr == 0)
- startaddr = heuristic_proc_start (pc);
-
- proc_desc = heuristic_proc_desc (startaddr, pc, NULL, NULL);
- }
-
- if (proc_desc)
- {
- /* If function is frameless, then we need to do it the hard way. I
- strongly suspect that frameless always means prologueless... */
- if (PROC_FRAME_REG (proc_desc) == MIPS_SP_REGNUM
- && PROC_FRAME_OFFSET (proc_desc) == 0)
- return 0;
- }
-
- if (!find_pc_partial_function (pc, NULL, &func_addr, &func_end))
- return 0; /* Unknown */
-
- sal = find_pc_line (func_addr, 0);
-
- if (sal.end < func_end)
- return sal.end;
-
- /* The line after the prologue is after the end of the function. In this
- case, tell the caller to find the prologue the hard way. */
-
- return 0;
-}
-
/* Fetch and return instruction from the specified location. If the PC
is odd, assume it's a MIPS16 instruction; otherwise MIPS32. */
-static t_inst
+static ULONGEST
mips_fetch_instruction (CORE_ADDR addr)
{
- char buf[MIPS32_INSN_SIZE];
+ gdb_byte buf[MIPS_INSN32_SIZE];
int instlen;
int status;
if (mips_pc_is_mips16 (addr))
{
- instlen = MIPS16_INSN_SIZE;
+ instlen = MIPS_INSN16_SIZE;
addr = unmake_mips16_addr (addr);
}
else
- instlen = MIPS32_INSN_SIZE;
- status = deprecated_read_memory_nobpt (addr, buf, instlen);
+ instlen = MIPS_INSN32_SIZE;
+ status = read_memory_nobpt (addr, buf, instlen);
if (status)
memory_error (status, addr);
return extract_unsigned_integer (buf, instlen);
}
-static ULONGEST
-mips16_fetch_instruction (CORE_ADDR addr)
-{
- char buf[MIPS16_INSN_SIZE];
- int status;
-
- addr = unmake_mips16_addr (addr);
- status = deprecated_read_memory_nobpt (addr, buf, sizeof (buf));
- if (status)
- memory_error (status, addr);
- return extract_unsigned_integer (buf, sizeof (buf));
-}
-
/* These the fields of 32 bit mips instructions */
#define mips32_op(x) (x >> 26)
#define itype_op(x) (x >> 26)
#define rtype_shamt(x) ((x >> 6) & 0x1f)
#define rtype_funct(x) (x & 0x3f)
-static CORE_ADDR
-mips32_relative_offset (unsigned long inst)
+static LONGEST
+mips32_relative_offset (ULONGEST inst)
{
- long x;
- x = itype_immediate (inst);
- if (x & 0x8000) /* sign bit set */
- {
- x |= 0xffff0000; /* sign extension */
- }
- x = x << 2;
- return x;
+ return ((itype_immediate (inst) ^ 0x8000) - 0x8000) << 2;
}
-/* Determine whate to set a single step breakpoint while considering
- branch prediction */
+/* Determine where to set a single step breakpoint while considering
+ branch prediction. */
static CORE_ADDR
mips32_next_pc (CORE_ADDR pc)
{
unsigned long reg;
reg = jtype_target (inst) << 2;
/* Upper four bits get never changed... */
- pc = reg + ((pc + 4) & 0xf0000000);
+ pc = reg + ((pc + 4) & ~(CORE_ADDR) 0x0fffffff);
}
break;
/* FIXME case JALX : */
{
unsigned long reg;
reg = jtype_target (inst) << 2;
- pc = reg + ((pc + 4) & 0xf0000000) + 1; /* yes, +1 */
+ pc = reg + ((pc + 4) & ~(CORE_ADDR) 0x0fffffff) + 1; /* yes, +1 */
/* Add 1 to indicate 16 bit mode - Invert ISA mode */
}
break; /* The new PC will be alternate mode */
static unsigned int
fetch_mips_16 (CORE_ADDR pc)
{
- char buf[8];
+ gdb_byte buf[8];
pc &= 0xfffffffe; /* clear the low order bit */
target_read_memory (pc, buf, 2);
return extract_unsigned_integer (buf, 2);
break;
}
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
upk->offset = offset;
upk->regx = regx;
static CORE_ADDR
add_offset_16 (CORE_ADDR pc, int offset)
{
- return ((offset << 2) | ((pc + 2) & (0xf0000000)));
+ return ((offset << 2) | ((pc + 2) & (~(CORE_ADDR) 0x0fffffff)));
}
static CORE_ADDR
struct trad_frame_saved_reg *saved_regs;
};
-
-static struct mips_frame_cache *
-mips_mdebug_frame_cache (struct frame_info *next_frame, void **this_cache)
-{
- CORE_ADDR startaddr = 0;
- mips_extra_func_info_t proc_desc;
- struct mips_frame_cache *cache;
- struct gdbarch *gdbarch = get_frame_arch (next_frame);
- struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
- /* r0 bit means kernel trap */
- int kernel_trap;
- /* What registers have been saved? Bitmasks. */
- unsigned long gen_mask, float_mask;
-
- if ((*this_cache) != NULL)
- return (*this_cache);
- cache = FRAME_OBSTACK_ZALLOC (struct mips_frame_cache);
- (*this_cache) = cache;
- cache->saved_regs = trad_frame_alloc_saved_regs (next_frame);
-
- /* Get the mdebug proc descriptor. */
- proc_desc = non_heuristic_proc_desc (frame_pc_unwind (next_frame),
- &startaddr);
- /* Must be true. This is only called when the sniffer detected a
- proc descriptor. */
- gdb_assert (proc_desc != NULL);
-
- /* Extract the frame's base. */
- cache->base = (frame_unwind_register_signed (next_frame, NUM_REGS + PROC_FRAME_REG (proc_desc))
- + PROC_FRAME_OFFSET (proc_desc) - PROC_FRAME_ADJUST (proc_desc));
-
- kernel_trap = PROC_REG_MASK (proc_desc) & 1;
- gen_mask = kernel_trap ? 0xFFFFFFFF : PROC_REG_MASK (proc_desc);
- float_mask = kernel_trap ? 0xFFFFFFFF : PROC_FREG_MASK (proc_desc);
-
- /* Must be true. The in_prologue case is left for the heuristic
- unwinder. This is always used on kernel traps. */
- gdb_assert (!in_prologue (frame_pc_unwind (next_frame), PROC_LOW_ADDR (proc_desc))
- || kernel_trap);
-
- /* Fill in the offsets for the registers which gen_mask says were
- saved. */
- {
- CORE_ADDR reg_position = (cache->base + PROC_REG_OFFSET (proc_desc));
- int ireg;
-
- for (ireg = MIPS_NUMREGS - 1; gen_mask; --ireg, gen_mask <<= 1)
- if (gen_mask & 0x80000000)
- {
- cache->saved_regs[NUM_REGS + ireg].addr = reg_position;
- reg_position -= mips_abi_regsize (gdbarch);
- }
- }
-
- /* The MIPS16 entry instruction saves $s0 and $s1 in the reverse
- order of that normally used by gcc. Therefore, we have to fetch
- the first instruction of the function, and if it's an entry
- instruction that saves $s0 or $s1, correct their saved addresses. */
- if (mips_pc_is_mips16 (PROC_LOW_ADDR (proc_desc)))
- {
- ULONGEST inst = mips16_fetch_instruction (PROC_LOW_ADDR (proc_desc));
- if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700)
- /* entry */
- {
- int reg;
- int sreg_count = (inst >> 6) & 3;
-
- /* Check if the ra register was pushed on the stack. */
- CORE_ADDR reg_position = (cache->base
- + PROC_REG_OFFSET (proc_desc));
- if (inst & 0x20)
- reg_position -= mips_abi_regsize (gdbarch);
-
- /* Check if the s0 and s1 registers were pushed on the
- stack. */
- /* NOTE: cagney/2004-02-08: Huh? This is doing no such
- check. */
- for (reg = 16; reg < sreg_count + 16; reg++)
- {
- cache->saved_regs[NUM_REGS + reg].addr = reg_position;
- reg_position -= mips_abi_regsize (gdbarch);
- }
- }
- }
-
- /* Fill in the offsets for the registers which float_mask says were
- saved. */
- {
- CORE_ADDR reg_position = (cache->base
- + PROC_FREG_OFFSET (proc_desc));
- int ireg;
- /* Fill in the offsets for the float registers which float_mask
- says were saved. */
- for (ireg = MIPS_NUMREGS - 1; float_mask; --ireg, float_mask <<= 1)
- if (float_mask & 0x80000000)
- {
- if (mips_abi_regsize (gdbarch) == 4
- && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- {
- /* On a big endian 32 bit ABI, floating point registers
- are paired to form doubles such that the most
- significant part is in $f[N+1] and the least
- significant in $f[N] vis: $f[N+1] ||| $f[N]. The
- registers are also spilled as a pair and stored as a
- double.
-
- When little-endian the least significant part is
- stored first leading to the memory order $f[N] and
- then $f[N+1].
-
- Unfortunately, when big-endian the most significant
- part of the double is stored first, and the least
- significant is stored second. This leads to the
- registers being ordered in memory as firt $f[N+1] and
- then $f[N].
-
- For the big-endian case make certain that the
- addresses point at the correct (swapped) locations
- $f[N] and $f[N+1] pair (keep in mind that
- reg_position is decremented each time through the
- loop). */
- if ((ireg & 1))
- cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
- .addr = reg_position - mips_abi_regsize (gdbarch);
- else
- cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
- .addr = reg_position + mips_abi_regsize (gdbarch);
- }
- else
- cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
- .addr = reg_position;
- reg_position -= mips_abi_regsize (gdbarch);
- }
-
- cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->pc]
- = cache->saved_regs[NUM_REGS + MIPS_RA_REGNUM];
- }
-
- /* SP_REGNUM, contains the value and not the address. */
- trad_frame_set_value (cache->saved_regs, NUM_REGS + MIPS_SP_REGNUM, cache->base);
-
- return (*this_cache);
-}
-
-static void
-mips_mdebug_frame_this_id (struct frame_info *next_frame, void **this_cache,
- struct frame_id *this_id)
-{
- struct mips_frame_cache *info = mips_mdebug_frame_cache (next_frame,
- this_cache);
- (*this_id) = frame_id_build (info->base, frame_func_unwind (next_frame));
-}
-
-static void
-mips_mdebug_frame_prev_register (struct frame_info *next_frame,
- void **this_cache,
- int regnum, int *optimizedp,
- enum lval_type *lvalp, CORE_ADDR *addrp,
- int *realnump, void *valuep)
-{
- struct mips_frame_cache *info = mips_mdebug_frame_cache (next_frame,
- this_cache);
- trad_frame_get_prev_register (next_frame, info->saved_regs, regnum,
- optimizedp, lvalp, addrp, realnump, valuep);
-}
-
-static const struct frame_unwind mips_mdebug_frame_unwind =
-{
- NORMAL_FRAME,
- mips_mdebug_frame_this_id,
- mips_mdebug_frame_prev_register
-};
-
-static const struct frame_unwind *
-mips_mdebug_frame_sniffer (struct frame_info *next_frame)
-{
- CORE_ADDR pc = frame_pc_unwind (next_frame);
- CORE_ADDR startaddr = 0;
- mips_extra_func_info_t proc_desc;
- int kernel_trap;
-
- /* Only use the mdebug frame unwinder on mdebug frames where all the
- registers have been saved. Leave hard cases such as no mdebug or
- in prologue for the heuristic unwinders. */
-
- proc_desc = non_heuristic_proc_desc (pc, &startaddr);
- if (proc_desc == NULL)
- return NULL;
-
- /* Not sure exactly what kernel_trap means, but if it means the
- kernel saves the registers without a prologue doing it, we better
- not examine the prologue to see whether registers have been saved
- yet. */
- kernel_trap = PROC_REG_MASK (proc_desc) & 1;
- if (kernel_trap)
- return &mips_mdebug_frame_unwind;
-
- /* In any frame other than the innermost or a frame interrupted by a
- signal, we assume that all registers have been saved. This
- assumes that all register saves in a function happen before the
- first function call. */
- if (!in_prologue (pc, PROC_LOW_ADDR (proc_desc)))
- return &mips_mdebug_frame_unwind;
-
- return NULL;
-}
-
-static CORE_ADDR
-mips_mdebug_frame_base_address (struct frame_info *next_frame,
- void **this_cache)
-{
- struct mips_frame_cache *info = mips_mdebug_frame_cache (next_frame,
- this_cache);
- return info->base;
-}
-
-static const struct frame_base mips_mdebug_frame_base = {
- &mips_mdebug_frame_unwind,
- mips_mdebug_frame_base_address,
- mips_mdebug_frame_base_address,
- mips_mdebug_frame_base_address
-};
-
-static const struct frame_base *
-mips_mdebug_frame_base_sniffer (struct frame_info *next_frame)
-{
- if (mips_mdebug_frame_sniffer (next_frame) != NULL)
- return &mips_mdebug_frame_base;
- else
- return NULL;
-}
-
/* Set a register's saved stack address in temp_saved_regs. If an
address has already been set for this register, do nothing; this
way we will only recognize the first save of a given register in a
if (limit_pc > start_pc + 200)
limit_pc = start_pc + 200;
- for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS16_INSN_SIZE)
+ for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS_INSN16_SIZE)
{
/* Save the previous instruction. If it's an EXTEND, we'll extract
the immediate offset extension from it in mips16_get_imm. */
over the extend. */
if ((inst & 0xf800) == 0xf000) /* extend */
{
- extend_bytes = MIPS16_INSN_SIZE;
+ extend_bytes = MIPS_INSN16_SIZE;
continue;
}
&& (inst & 0x700) != 0x700) /* entry */
entry_inst = inst; /* save for later processing */
else if ((inst & 0xf800) == 0x1800) /* jal(x) */
- cur_pc += MIPS16_INSN_SIZE; /* 32-bit instruction */
+ cur_pc += MIPS_INSN16_SIZE; /* 32-bit instruction */
else if ((inst & 0xff1c) == 0x6704) /* move reg,$a0-$a3 */
{
/* This instruction is part of the prologue, but we don't
void **this_cache,
int regnum, int *optimizedp,
enum lval_type *lvalp, CORE_ADDR *addrp,
- int *realnump, void *valuep)
+ int *realnump, gdb_byte *valuep)
{
struct mips_frame_cache *info = mips_insn16_frame_cache (next_frame,
this_cache);
restart:
frame_offset = 0;
- for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS32_INSN_SIZE)
+ for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS_INSN32_SIZE)
{
unsigned long inst, high_word, low_word;
int reg;
|| high_word == 0x3408 /* ori $t0,$zero,n */
))
{
- load_immediate_bytes += MIPS32_INSN_SIZE; /* FIXME! */
+ load_immediate_bytes += MIPS_INSN32_SIZE; /* FIXME! */
}
else
{
void **this_cache,
int regnum, int *optimizedp,
enum lval_type *lvalp, CORE_ADDR *addrp,
- int *realnump, void *valuep)
+ int *realnump, gdb_byte *valuep)
{
struct mips_frame_cache *info = mips_insn32_frame_cache (next_frame,
this_cache);
void **this_cache,
int regnum, int *optimizedp,
enum lval_type *lvalp, CORE_ADDR *addrp,
- int *realnump, void *valuep)
+ int *realnump, gdb_byte *valuep)
{
struct trad_frame_cache *this_trad_cache
= mips_stub_frame_cache (next_frame, this_cache);
static const struct frame_unwind *
mips_stub_frame_sniffer (struct frame_info *next_frame)
{
+ struct obj_section *s;
CORE_ADDR pc = frame_pc_unwind (next_frame);
+
if (in_plt_section (pc, NULL))
return &mips_stub_frame_unwind;
- else
- return NULL;
+
+ /* Binutils for MIPS puts lazy resolution stubs into .MIPS.stubs. */
+ s = find_pc_section (pc);
+
+ if (s != NULL
+ && strcmp (bfd_get_section_name (s->objfile->obfd, s->the_bfd_section),
+ ".MIPS.stubs") == 0)
+ return &mips_stub_frame_unwind;
+
+ return NULL;
}
static CORE_ADDR
void
mips_software_single_step (enum target_signal sig, int insert_breakpoints_p)
{
- static CORE_ADDR next_pc;
- typedef char binsn_quantum[BREAKPOINT_MAX];
- static binsn_quantum break_mem;
- CORE_ADDR pc;
+ CORE_ADDR pc, next_pc;
if (insert_breakpoints_p)
{
pc = read_register (mips_regnum (current_gdbarch)->pc);
next_pc = mips_next_pc (pc);
- target_insert_breakpoint (next_pc, break_mem);
+ insert_single_step_breakpoint (next_pc);
}
else
- target_remove_breakpoint (next_pc, break_mem);
+ remove_single_step_breakpoints ();
}
-static struct mips_extra_func_info temp_proc_desc;
-
/* Test whether the PC points to the return instruction at the
end of a function. */
if (heuristic_fence_post == UINT_MAX || fence < VM_MIN_ADDRESS)
fence = VM_MIN_ADDRESS;
- instlen = mips_pc_is_mips16 (pc) ? MIPS16_INSN_SIZE : MIPS32_INSN_SIZE;
+ instlen = mips_pc_is_mips16 (pc) ? MIPS_INSN16_SIZE : MIPS_INSN32_SIZE;
/* search back for previous return */
for (start_pc -= instlen;; start_pc -= instlen)
{
static int blurb_printed = 0;
- warning ("GDB can't find the start of the function at 0x%s.",
+ warning (_("GDB can't find the start of the function at 0x%s."),
paddr_nz (pc));
if (!blurb_printed)
else if (mips_about_to_return (start_pc))
{
/* Skip return and its delay slot. */
- start_pc += 2 * MIPS32_INSN_SIZE;
+ start_pc += 2 * MIPS_INSN32_SIZE;
break;
}
return start_pc;
}
-static mips_extra_func_info_t
-heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc,
- struct frame_info *next_frame,
- struct mips_frame_cache *this_cache)
-{
- if (start_pc == 0)
- return NULL;
-
- memset (&temp_proc_desc, '\0', sizeof (temp_proc_desc));
- PROC_LOW_ADDR (&temp_proc_desc) = start_pc;
- PROC_FRAME_REG (&temp_proc_desc) = MIPS_SP_REGNUM;
- PROC_PC_REG (&temp_proc_desc) = MIPS_RA_REGNUM;
-
- if (mips_pc_is_mips16 (start_pc))
- mips16_scan_prologue (start_pc, limit_pc, next_frame, this_cache);
- else
- mips32_scan_prologue (start_pc, limit_pc, next_frame, this_cache);
-
- return &temp_proc_desc;
-}
-
struct mips_objfile_private
{
bfd_size_type size;
char *contents;
};
-/* Global used to communicate between non_heuristic_proc_desc and
- compare_pdr_entries within qsort (). */
-static bfd *the_bfd;
-
-static int
-compare_pdr_entries (const void *a, const void *b)
-{
- CORE_ADDR lhs = bfd_get_32 (the_bfd, (bfd_byte *) a);
- CORE_ADDR rhs = bfd_get_32 (the_bfd, (bfd_byte *) b);
-
- if (lhs < rhs)
- return -1;
- else if (lhs == rhs)
- return 0;
- else
- return 1;
-}
-
-static mips_extra_func_info_t
-non_heuristic_proc_desc (CORE_ADDR pc, CORE_ADDR *addrptr)
-{
- CORE_ADDR startaddr;
- mips_extra_func_info_t proc_desc;
- struct block *b = block_for_pc (pc);
- struct symbol *sym;
- struct obj_section *sec;
- struct mips_objfile_private *priv;
-
- find_pc_partial_function (pc, NULL, &startaddr, NULL);
- if (addrptr)
- *addrptr = startaddr;
-
- priv = NULL;
-
- sec = find_pc_section (pc);
- if (sec != NULL)
- {
- priv = (struct mips_objfile_private *) objfile_data (sec->objfile, mips_pdr_data);
-
- /* Search the ".pdr" section generated by GAS. This includes most of
- the information normally found in ECOFF PDRs. */
-
- the_bfd = sec->objfile->obfd;
- if (priv == NULL
- && (the_bfd->format == bfd_object
- && bfd_get_flavour (the_bfd) == bfd_target_elf_flavour
- && elf_elfheader (the_bfd)->e_ident[EI_CLASS] == ELFCLASS64))
- {
- /* Right now GAS only outputs the address as a four-byte sequence.
- This means that we should not bother with this method on 64-bit
- targets (until that is fixed). */
-
- priv = obstack_alloc (&sec->objfile->objfile_obstack,
- sizeof (struct mips_objfile_private));
- priv->size = 0;
- set_objfile_data (sec->objfile, mips_pdr_data, priv);
- }
- else if (priv == NULL)
- {
- asection *bfdsec;
-
- priv = obstack_alloc (&sec->objfile->objfile_obstack,
- sizeof (struct mips_objfile_private));
-
- bfdsec = bfd_get_section_by_name (sec->objfile->obfd, ".pdr");
- if (bfdsec != NULL)
- {
- priv->size = bfd_section_size (sec->objfile->obfd, bfdsec);
- priv->contents = obstack_alloc (&sec->objfile->objfile_obstack,
- priv->size);
- bfd_get_section_contents (sec->objfile->obfd, bfdsec,
- priv->contents, 0, priv->size);
-
- /* In general, the .pdr section is sorted. However, in the
- presence of multiple code sections (and other corner cases)
- it can become unsorted. Sort it so that we can use a faster
- binary search. */
- qsort (priv->contents, priv->size / 32, 32,
- compare_pdr_entries);
- }
- else
- priv->size = 0;
-
- set_objfile_data (sec->objfile, mips_pdr_data, priv);
- }
- the_bfd = NULL;
-
- if (priv->size != 0)
- {
- int low, mid, high;
- char *ptr;
- CORE_ADDR pdr_pc;
-
- low = 0;
- high = priv->size / 32;
-
- /* We've found a .pdr section describing this objfile. We want to
- find the entry which describes this code address. The .pdr
- information is not very descriptive; we have only a function
- start address. We have to look for the closest entry, because
- the local symbol at the beginning of this function may have
- been stripped - so if we ask the symbol table for the start
- address we may get a preceding global function. */
-
- /* First, find the last .pdr entry starting at or before PC. */
- do
- {
- mid = (low + high) / 2;
-
- ptr = priv->contents + mid * 32;
- pdr_pc = bfd_get_signed_32 (sec->objfile->obfd, ptr);
- pdr_pc += ANOFFSET (sec->objfile->section_offsets,
- SECT_OFF_TEXT (sec->objfile));
-
- if (pdr_pc > pc)
- high = mid;
- else
- low = mid + 1;
- }
- while (low != high);
-
- /* Both low and high point one past the PDR of interest. If
- both are zero, that means this PC is before any region
- covered by a PDR, i.e. pdr_pc for the first PDR entry is
- greater than PC. */
- if (low > 0)
- {
- ptr = priv->contents + (low - 1) * 32;
- pdr_pc = bfd_get_signed_32 (sec->objfile->obfd, ptr);
- pdr_pc += ANOFFSET (sec->objfile->section_offsets,
- SECT_OFF_TEXT (sec->objfile));
- }
-
- /* We don't have a range, so we have no way to know for sure
- whether we're in the correct PDR or a PDR for a preceding
- function and the current function was a stripped local
- symbol. But if the PDR's PC is at least as great as the
- best guess from the symbol table, assume that it does cover
- the right area; if a .pdr section is present at all then
- nearly every function will have an entry. The biggest exception
- will be the dynamic linker stubs; conveniently these are
- placed before .text instead of after. */
-
- if (pc >= pdr_pc && pdr_pc >= startaddr)
- {
- struct symbol *sym = find_pc_function (pc);
-
- if (addrptr)
- *addrptr = pdr_pc;
-
- /* Fill in what we need of the proc_desc. */
- proc_desc = (mips_extra_func_info_t)
- obstack_alloc (&sec->objfile->objfile_obstack,
- sizeof (struct mips_extra_func_info));
- PROC_LOW_ADDR (proc_desc) = pdr_pc;
-
- /* Only used for dummy frames. */
- PROC_HIGH_ADDR (proc_desc) = 0;
-
- PROC_FRAME_OFFSET (proc_desc)
- = bfd_get_32 (sec->objfile->obfd, ptr + 20);
- PROC_FRAME_REG (proc_desc) = bfd_get_32 (sec->objfile->obfd,
- ptr + 24);
- PROC_FRAME_ADJUST (proc_desc) = 0;
- PROC_REG_MASK (proc_desc) = bfd_get_32 (sec->objfile->obfd,
- ptr + 4);
- PROC_FREG_MASK (proc_desc) = bfd_get_32 (sec->objfile->obfd,
- ptr + 12);
- PROC_REG_OFFSET (proc_desc) = bfd_get_32 (sec->objfile->obfd,
- ptr + 8);
- PROC_FREG_OFFSET (proc_desc)
- = bfd_get_32 (sec->objfile->obfd, ptr + 16);
- PROC_PC_REG (proc_desc) = bfd_get_32 (sec->objfile->obfd,
- ptr + 28);
- proc_desc->pdr.isym = (long) sym;
-
- return proc_desc;
- }
- }
- }
-
- if (b == NULL)
- return NULL;
-
- if (startaddr > BLOCK_START (b))
- {
- /* This is the "pathological" case referred to in a comment in
- print_frame_info. It might be better to move this check into
- symbol reading. */
- return NULL;
- }
-
- sym = lookup_symbol (MIPS_EFI_SYMBOL_NAME, b, LABEL_DOMAIN, 0, NULL);
-
- /* If we never found a PDR for this function in symbol reading, then
- examine prologues to find the information. */
- if (sym)
- {
- proc_desc = (mips_extra_func_info_t) SYMBOL_VALUE (sym);
- if (PROC_FRAME_REG (proc_desc) == -1)
- return NULL;
- else
- return proc_desc;
- }
- else
- return NULL;
-}
-
-/* MIPS stack frames are almost impenetrable. When execution stops,
- we basically have to look at symbol information for the function
- that we stopped in, which tells us *which* register (if any) is
- the base of the frame pointer, and what offset from that register
- the frame itself is at.
-
- This presents a problem when trying to examine a stack in memory
- (that isn't executing at the moment), using the "frame" command. We
- don't have a PC, nor do we have any registers except SP.
-
- This routine takes two arguments, SP and PC, and tries to make the
- cached frames look as if these two arguments defined a frame on the
- cache. This allows the rest of info frame to extract the important
- arguments without difficulty. */
-
-struct frame_info *
-setup_arbitrary_frame (int argc, CORE_ADDR *argv)
-{
- if (argc != 2)
- error ("MIPS frame specifications require two arguments: sp and pc");
-
- return create_new_frame (argv[0], argv[1]);
-}
-
/* According to the current ABI, should the type be passed in a
floating-point register (assuming that there is space)? When there
- is no FPU, FP are not even considered as possibile candidates for
+ is no FPU, FP are not even considered as possible candidates for
FP registers and, consequently this returns false - forces FP
arguments into integer registers. */
&& (typecode == TYPE_CODE_STRUCT
|| typecode == TYPE_CODE_UNION)
&& TYPE_NFIELDS (arg_type) == 1
- && TYPE_CODE (TYPE_FIELD_TYPE (arg_type, 0)) == TYPE_CODE_FLT))
+ && TYPE_CODE (check_typedef (TYPE_FIELD_TYPE (arg_type, 0)))
+ == TYPE_CODE_FLT))
&& MIPS_FPU_TYPE != MIPS_FPU_NONE);
}
than necessary for EABI, because the first few arguments are
passed in registers, but that's OK. */
for (argnum = 0; argnum < nargs; argnum++)
- len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ len += align_up (TYPE_LENGTH (value_type (args[argnum])),
mips_stack_argsize (gdbarch));
sp -= align_up (len, 16);
from first to last. */
for (argnum = 0; argnum < nargs; argnum++)
{
- char *val;
- char valbuf[MAX_REGISTER_SIZE];
+ const gdb_byte *val;
+ gdb_byte valbuf[MAX_REGISTER_SIZE];
struct value *arg = args[argnum];
- struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+ struct type *arg_type = check_typedef (value_type (arg));
int len = TYPE_LENGTH (arg_type);
enum type_code typecode = TYPE_CODE (arg_type);
fprintf_unfiltered (gdb_stdlog, " push");
}
else
- val = (char *) VALUE_CONTENTS (arg);
+ val = value_contents (arg);
/* 32-bit ABIs always start floating point arguments in an
even-numbered floating point register. Round the FP register
if (fp_register_arg_p (typecode, arg_type)
&& float_argreg <= MIPS_LAST_FP_ARG_REGNUM)
{
- if (mips_abi_regsize (gdbarch) < 8 && len == 8)
+ if (register_size (gdbarch, float_argreg) < 8 && len == 8)
{
int low_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0;
unsigned long regval;
return sp;
}
-/* Determin the return value convention being used. */
+/* Determine the return value convention being used. */
static enum return_value_convention
mips_eabi_return_value (struct gdbarch *gdbarch,
struct type *type, struct regcache *regcache,
- void *readbuf, const void *writebuf)
+ gdb_byte *readbuf, const gdb_byte *writebuf)
{
if (TYPE_LENGTH (type) > 2 * mips_abi_regsize (gdbarch))
return RETURN_VALUE_STRUCT_CONVENTION;
/* Now make space on the stack for the args. */
for (argnum = 0; argnum < nargs; argnum++)
- len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ len += align_up (TYPE_LENGTH (value_type (args[argnum])),
mips_stack_argsize (gdbarch));
sp -= align_up (len, 16);
from first to last. */
for (argnum = 0; argnum < nargs; argnum++)
{
- char *val;
+ const gdb_byte *val;
struct value *arg = args[argnum];
- struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+ struct type *arg_type = check_typedef (value_type (arg));
int len = TYPE_LENGTH (arg_type);
enum type_code typecode = TYPE_CODE (arg_type);
"mips_n32n64_push_dummy_call: %d len=%d type=%d",
argnum + 1, len, (int) typecode);
- val = (char *) VALUE_CONTENTS (arg);
+ val = value_contents (arg);
if (fp_register_arg_p (typecode, arg_type)
&& float_argreg <= MIPS_LAST_FP_ARG_REGNUM)
static enum return_value_convention
mips_n32n64_return_value (struct gdbarch *gdbarch,
struct type *type, struct regcache *regcache,
- void *readbuf, const void *writebuf)
+ gdb_byte *readbuf, const gdb_byte *writebuf)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
if (TYPE_CODE (type) == TYPE_CODE_STRUCT
|| TYPE_CODE (type) == TYPE_CODE_ARRAY
|| TYPE_LENGTH (type) > 2 * mips_abi_regsize (gdbarch))
return RETURN_VALUE_STRUCT_CONVENTION;
+ else if (TYPE_CODE (type) == TYPE_CODE_FLT
+ && TYPE_LENGTH (type) == 16
+ && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ {
+ /* A 128-bit floating-point value fills both $f0 and $f2. The
+ two registers are used in the same as memory order, so the
+ eight bytes with the lower memory address are in $f0. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float in $f0 and $f2\n");
+ mips_xfer_register (regcache,
+ NUM_REGS + mips_regnum (current_gdbarch)->fp0,
+ 8, TARGET_BYTE_ORDER, readbuf, writebuf, 0);
+ mips_xfer_register (regcache,
+ NUM_REGS + mips_regnum (current_gdbarch)->fp0 + 2,
+ 8, TARGET_BYTE_ORDER, readbuf ? readbuf + 8 : readbuf,
+ writebuf ? writebuf + 8 : writebuf, 0);
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
else if (TYPE_CODE (type) == TYPE_CODE_FLT
&& tdep->mips_fpu_type != MIPS_FPU_NONE)
{
/* Now make space on the stack for the args. */
for (argnum = 0; argnum < nargs; argnum++)
- len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ len += align_up (TYPE_LENGTH (value_type (args[argnum])),
mips_stack_argsize (gdbarch));
sp -= align_up (len, 16);
from first to last. */
for (argnum = 0; argnum < nargs; argnum++)
{
- char *val;
+ const gdb_byte *val;
struct value *arg = args[argnum];
- struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+ struct type *arg_type = check_typedef (value_type (arg));
int len = TYPE_LENGTH (arg_type);
enum type_code typecode = TYPE_CODE (arg_type);
"mips_o32_push_dummy_call: %d len=%d type=%d",
argnum + 1, len, (int) typecode);
- val = (char *) VALUE_CONTENTS (arg);
+ val = value_contents (arg);
/* 32-bit ABIs always start floating point arguments in an
even-numbered floating point register. Round the FP register
if (fp_register_arg_p (typecode, arg_type)
&& float_argreg <= MIPS_LAST_FP_ARG_REGNUM)
{
- if (mips_abi_regsize (gdbarch) < 8 && len == 8)
+ if (register_size (gdbarch, float_argreg) < 8 && len == 8)
{
int low_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0;
unsigned long regval;
static enum return_value_convention
mips_o32_return_value (struct gdbarch *gdbarch, struct type *type,
struct regcache *regcache,
- void *readbuf, const void *writebuf)
+ gdb_byte *readbuf, const gdb_byte *writebuf)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
0, 4, TARGET_BYTE_ORDER, readbuf, writebuf, 4);
break;
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
return RETURN_VALUE_REGISTER_CONVENTION;
}
/* A struct that contains one or two floats. Each value is part
in the least significant part of their floating point
register.. */
- bfd_byte reg[MAX_REGISTER_SIZE];
+ gdb_byte reg[MAX_REGISTER_SIZE];
int regnum;
int field;
for (field = 0, regnum = mips_regnum (current_gdbarch)->fp0;
/* Now make space on the stack for the args. */
for (argnum = 0; argnum < nargs; argnum++)
- len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ len += align_up (TYPE_LENGTH (value_type (args[argnum])),
mips_stack_argsize (gdbarch));
sp -= align_up (len, 16);
from first to last. */
for (argnum = 0; argnum < nargs; argnum++)
{
- char *val;
+ const gdb_byte *val;
struct value *arg = args[argnum];
- struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+ struct type *arg_type = check_typedef (value_type (arg));
int len = TYPE_LENGTH (arg_type);
enum type_code typecode = TYPE_CODE (arg_type);
"mips_o64_push_dummy_call: %d len=%d type=%d",
argnum + 1, len, (int) typecode);
- val = (char *) VALUE_CONTENTS (arg);
+ val = value_contents (arg);
/* 32-bit ABIs always start floating point arguments in an
even-numbered floating point register. Round the FP register
big endian targets.
It does not seem to be necessary to do the
- same for integral types.
-
- Also don't do this adjustment on O64 binaries.
+ same for integral types. */
- cagney/2001-07-23: gdb/179: Also, GCC, when
- outputting LE O32 with sizeof (struct) <
- mips_abi_regsize(), generates a left shift as
- part of storing the argument in a register a
- register (the left shift isn't generated when
- sizeof (struct) >= mips_abi_regsize()). Since
- it is quite possible that this is GCC
- contradicting the LE/O32 ABI, GDB has not been
- adjusted to accommodate this. Either someone
- needs to demonstrate that the LE/O32 ABI
- specifies such a left shift OR this new ABI gets
- identified as such and GDB gets tweaked
- accordingly. */
-
- if (mips_abi_regsize (gdbarch) < 8
- && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
&& partial_len < mips_abi_regsize (gdbarch)
&& (typecode == TYPE_CODE_STRUCT ||
typecode == TYPE_CODE_UNION))
static enum return_value_convention
mips_o64_return_value (struct gdbarch *gdbarch,
struct type *type, struct regcache *regcache,
- void *readbuf, const void *writebuf)
+ gdb_byte *readbuf, const gdb_byte *writebuf)
{
- return RETURN_VALUE_STRUCT_CONVENTION;
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+
+ if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (type) == TYPE_CODE_UNION
+ || TYPE_CODE (type) == TYPE_CODE_ARRAY)
+ return RETURN_VALUE_STRUCT_CONVENTION;
+ else if (fp_register_arg_p (TYPE_CODE (type), type))
+ {
+ /* A floating-point value. It fits in the least significant
+ part of FP0. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
+ mips_xfer_register (regcache,
+ NUM_REGS + mips_regnum (current_gdbarch)->fp0,
+ TYPE_LENGTH (type),
+ TARGET_BYTE_ORDER, readbuf, writebuf, 0);
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+ else
+ {
+ /* A scalar extract each part but least-significant-byte
+ justified. */
+ int offset;
+ int regnum;
+ for (offset = 0, regnum = MIPS_V0_REGNUM;
+ offset < TYPE_LENGTH (type);
+ offset += mips_stack_argsize (gdbarch), regnum++)
+ {
+ int xfer = mips_stack_argsize (gdbarch);
+ if (offset + xfer > TYPE_LENGTH (type))
+ xfer = TYPE_LENGTH (type) - offset;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return scalar+%d:%d in $%d\n",
+ offset, xfer, regnum);
+ mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
+ TARGET_BYTE_ORDER, readbuf, writebuf, offset);
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
}
/* Floating point register management.
static struct type *
mips_float_register_type (void)
{
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- return builtin_type_ieee_single_big;
- else
- return builtin_type_ieee_single_little;
+ return builtin_type_ieee_single;
}
static struct type *
mips_double_register_type (void)
{
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- return builtin_type_ieee_double_big;
- else
- return builtin_type_ieee_double_little;
+ return builtin_type_ieee_double;
}
/* Copy a 32-bit single-precision value from the current frame
static void
mips_read_fp_register_single (struct frame_info *frame, int regno,
- char *rare_buffer)
+ gdb_byte *rare_buffer)
{
int raw_size = register_size (current_gdbarch, regno);
- char *raw_buffer = alloca (raw_size);
+ gdb_byte *raw_buffer = alloca (raw_size);
if (!frame_register_read (frame, regno, raw_buffer))
- error ("can't read register %d (%s)", regno, REGISTER_NAME (regno));
+ error (_("can't read register %d (%s)"), regno, REGISTER_NAME (regno));
if (raw_size == 8)
{
/* We have a 64-bit value for this register. Find the low-order
static void
mips_read_fp_register_double (struct frame_info *frame, int regno,
- char *rare_buffer)
+ gdb_byte *rare_buffer)
{
int raw_size = register_size (current_gdbarch, regno);
/* We have a 64-bit value for this register, and we should use
all 64 bits. */
if (!frame_register_read (frame, regno, rare_buffer))
- error ("can't read register %d (%s)", regno, REGISTER_NAME (regno));
+ error (_("can't read register %d (%s)"), regno, REGISTER_NAME (regno));
}
else
{
if ((regno - mips_regnum (current_gdbarch)->fp0) & 1)
internal_error (__FILE__, __LINE__,
- "mips_read_fp_register_double: bad access to "
- "odd-numbered FP register");
+ _("mips_read_fp_register_double: bad access to "
+ "odd-numbered FP register"));
/* mips_read_fp_register_single will find the correct 32 bits from
each register. */
mips_print_fp_register (struct ui_file *file, struct frame_info *frame,
int regnum)
{ /* do values for FP (float) regs */
- char *raw_buffer;
+ gdb_byte *raw_buffer;
double doub, flt1; /* doubles extracted from raw hex data */
int inv1, inv2;
- raw_buffer =
- (char *) alloca (2 *
- register_size (current_gdbarch,
- mips_regnum (current_gdbarch)->fp0));
+ raw_buffer = alloca (2 * register_size (current_gdbarch,
+ mips_regnum (current_gdbarch)->fp0));
fprintf_filtered (file, "%s:", REGISTER_NAME (regnum));
fprintf_filtered (file, "%*s", 4 - (int) strlen (REGISTER_NAME (regnum)),
int regnum, int all)
{
struct gdbarch *gdbarch = get_frame_arch (frame);
- char raw_buffer[MAX_REGISTER_SIZE];
+ gdb_byte raw_buffer[MAX_REGISTER_SIZE];
int offset;
- if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) == TYPE_CODE_FLT)
+ if (TYPE_CODE (register_type (gdbarch, regnum)) == TYPE_CODE_FLT)
{
mips_print_fp_register (file, frame, regnum);
return;
offset = 0;
print_scalar_formatted (raw_buffer + offset,
- gdbarch_register_type (gdbarch, regnum), 'x', 0,
+ register_type (gdbarch, regnum), 'x', 0,
file);
}
{
struct gdbarch *gdbarch = get_frame_arch (frame);
/* do values for GP (int) regs */
- char raw_buffer[MAX_REGISTER_SIZE];
+ gdb_byte raw_buffer[MAX_REGISTER_SIZE];
int ncols = (mips_abi_regsize (gdbarch) == 8 ? 4 : 8); /* display cols per row */
int col, byte;
int regnum;
/* For GP registers, we print a separate row of names above the vals */
- fprintf_filtered (file, " ");
for (col = 0, regnum = start_regnum;
col < ncols && regnum < NUM_REGS + NUM_PSEUDO_REGS; regnum++)
{
if (*REGISTER_NAME (regnum) == '\0')
continue; /* unused register */
- if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) ==
+ if (TYPE_CODE (register_type (gdbarch, regnum)) ==
TYPE_CODE_FLT)
break; /* end the row: reached FP register */
+ if (col == 0)
+ fprintf_filtered (file, " ");
fprintf_filtered (file,
mips_abi_regsize (current_gdbarch) == 8 ? "%17s" : "%9s",
REGISTER_NAME (regnum));
col++;
}
+
+ if (col == 0)
+ return regnum;
+
/* print the R0 to R31 names */
if ((start_regnum % NUM_REGS) < MIPS_NUMREGS)
fprintf_filtered (file, "\n R%-4d", start_regnum % NUM_REGS);
{
if (*REGISTER_NAME (regnum) == '\0')
continue; /* unused register */
- if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) ==
+ if (TYPE_CODE (register_type (gdbarch, regnum)) ==
TYPE_CODE_FLT)
break; /* end row: reached FP register */
/* OK: get the data in raw format. */
if (!frame_register_read (frame, regnum, raw_buffer))
- error ("can't read register %d (%s)", regnum, REGISTER_NAME (regnum));
+ error (_("can't read register %d (%s)"), regnum, REGISTER_NAME (regnum));
/* pad small registers */
for (byte = 0;
byte < (mips_abi_regsize (current_gdbarch)
register_size (current_gdbarch,
regnum) - register_size (current_gdbarch, regnum);
byte < register_size (current_gdbarch, regnum); byte++)
- fprintf_filtered (file, "%02x", (unsigned char) raw_buffer[byte]);
+ fprintf_filtered (file, "%02x", raw_buffer[byte]);
else
for (byte = register_size (current_gdbarch, regnum) - 1;
byte >= 0; byte--)
- fprintf_filtered (file, "%02x", (unsigned char) raw_buffer[byte]);
+ fprintf_filtered (file, "%02x", raw_buffer[byte]);
fprintf_filtered (file, " ");
col++;
}
{
gdb_assert (regnum >= NUM_REGS);
if (*(REGISTER_NAME (regnum)) == '\0')
- error ("Not a valid register for the current processor type");
+ error (_("Not a valid register for the current processor type"));
mips_print_register (file, frame, regnum, 0);
fprintf_filtered (file, "\n");
regnum = NUM_REGS;
while (regnum < NUM_REGS + NUM_PSEUDO_REGS)
{
- if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) ==
+ if (TYPE_CODE (register_type (gdbarch, regnum)) ==
TYPE_CODE_FLT)
{
if (all) /* true for "INFO ALL-REGISTERS" command */
}
int
-mips_step_skips_delay (CORE_ADDR pc)
+mips_single_step_through_delay (struct gdbarch *gdbarch,
+ struct frame_info *frame)
{
- char buf[MIPS32_INSN_SIZE];
+ CORE_ADDR pc = get_frame_pc (frame);
+ gdb_byte buf[MIPS_INSN32_SIZE];
/* There is no branch delay slot on MIPS16. */
if (mips_pc_is_mips16 (pc))
return 0;
- if (target_read_memory (pc, buf, sizeof buf) != 0)
- /* If error reading memory, guess that it is not a delayed branch. */
+ if (!breakpoint_here_p (pc + 4))
+ return 0;
+
+ if (!safe_frame_unwind_memory (frame, pc, buf, sizeof buf))
+ /* If error reading memory, guess that it is not a delayed
+ branch. */
return 0;
return is_delayed (extract_unsigned_integer (buf, sizeof buf));
}
static CORE_ADDR
mips_skip_prologue (CORE_ADDR pc)
{
+ CORE_ADDR limit_pc;
+ CORE_ADDR func_addr;
+
/* See if we can determine the end of the prologue via the symbol table.
If so, then return either PC, or the PC after the prologue, whichever
is greater. */
-
- CORE_ADDR post_prologue_pc = after_prologue (pc);
- CORE_ADDR limit_pc;
-
- if (post_prologue_pc != 0)
- return max (pc, post_prologue_pc);
+ if (find_pc_partial_function (pc, NULL, &func_addr, NULL))
+ {
+ CORE_ADDR post_prologue_pc = skip_prologue_using_sal (func_addr);
+ if (post_prologue_pc != 0)
+ return max (pc, post_prologue_pc);
+ }
/* Can't determine prologue from the symbol table, need to examine
instructions. */
fpu = "absent (none)";
break;
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
if (mips_fpu_type_auto)
printf_unfiltered
instead of relying on globals. Doing that would let generic code
handle the search for this specific architecture. */
if (!gdbarch_update_p (info))
- internal_error (__FILE__, __LINE__, "set mipsfpu failed");
+ internal_error (__FILE__, __LINE__, _("set mipsfpu failed"));
}
static void
instead of relying on globals. Doing that would let generic code
handle the search for this specific architecture. */
if (!gdbarch_update_p (info))
- internal_error (__FILE__, __LINE__, "set mipsfpu failed");
+ internal_error (__FILE__, __LINE__, _("set mipsfpu failed"));
}
static void
instead of relying on globals. Doing that would let generic code
handle the search for this specific architecture. */
if (!gdbarch_update_p (info))
- internal_error (__FILE__, __LINE__, "set mipsfpu failed");
+ internal_error (__FILE__, __LINE__, _("set mipsfpu failed"));
}
static void
struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
CORE_ADDR prid;
- prid = read_register (PRID_REGNUM);
+ prid = read_register (MIPS_PRID_REGNUM);
if ((prid & ~0xf) == 0x700)
tdep->mips_processor_reg_names = mips_r3041_reg_names;
gdb_print_insn_mips (bfd_vma memaddr, struct disassemble_info *info)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
- mips_extra_func_info_t proc_desc;
-
- /* Search for the function containing this address. Set the low bit
- of the address when searching, in case we were given an even address
- that is the start of a 16-bit function. If we didn't do this,
- the search would fail because the symbol table says the function
- starts at an odd address, i.e. 1 byte past the given address. */
- memaddr = ADDR_BITS_REMOVE (memaddr);
- proc_desc = non_heuristic_proc_desc (make_mips16_addr (memaddr), NULL);
-
- /* Make an attempt to determine if this is a 16-bit function. If
- the procedure descriptor exists and the address therein is odd,
- it's definitely a 16-bit function. Otherwise, we have to just
- guess that if the address passed in is odd, it's 16-bits. */
+
/* FIXME: cagney/2003-06-26: Is this even necessary? The
disassembler needs to be able to locally determine the ISA, and
not rely on GDB. Otherwize the stand-alone 'objdump -d' will not
work. */
- if (proc_desc)
- {
- if (mips_pc_is_mips16 (PROC_LOW_ADDR (proc_desc)))
- info->mach = bfd_mach_mips16;
- }
- else
- {
- if (mips_pc_is_mips16 (memaddr))
- info->mach = bfd_mach_mips16;
- }
+ if (mips_pc_is_mips16 (memaddr))
+ info->mach = bfd_mach_mips16;
/* Round down the instruction address to the appropriate boundary. */
memaddr &= (info->mach == bfd_mach_mips16 ? ~1 : ~3);
(if necessary) to point to the actual memory location where the
breakpoint should be inserted. */
-static const unsigned char *
+static const gdb_byte *
mips_breakpoint_from_pc (CORE_ADDR *pcptr, int *lenptr)
{
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
if (mips_pc_is_mips16 (*pcptr))
{
- static unsigned char mips16_big_breakpoint[] = { 0xe8, 0xa5 };
+ static gdb_byte mips16_big_breakpoint[] = { 0xe8, 0xa5 };
*pcptr = unmake_mips16_addr (*pcptr);
*lenptr = sizeof (mips16_big_breakpoint);
return mips16_big_breakpoint;
/* The IDT board uses an unusual breakpoint value, and
sometimes gets confused when it sees the usual MIPS
breakpoint instruction. */
- static unsigned char big_breakpoint[] = { 0, 0x5, 0, 0xd };
- static unsigned char pmon_big_breakpoint[] = { 0, 0, 0, 0xd };
- static unsigned char idt_big_breakpoint[] = { 0, 0, 0x0a, 0xd };
+ static gdb_byte big_breakpoint[] = { 0, 0x5, 0, 0xd };
+ static gdb_byte pmon_big_breakpoint[] = { 0, 0, 0, 0xd };
+ static gdb_byte idt_big_breakpoint[] = { 0, 0, 0x0a, 0xd };
*lenptr = sizeof (big_breakpoint);
{
if (mips_pc_is_mips16 (*pcptr))
{
- static unsigned char mips16_little_breakpoint[] = { 0xa5, 0xe8 };
+ static gdb_byte mips16_little_breakpoint[] = { 0xa5, 0xe8 };
*pcptr = unmake_mips16_addr (*pcptr);
*lenptr = sizeof (mips16_little_breakpoint);
return mips16_little_breakpoint;
}
else
{
- static unsigned char little_breakpoint[] = { 0xd, 0, 0x5, 0 };
- static unsigned char pmon_little_breakpoint[] = { 0xd, 0, 0, 0 };
- static unsigned char idt_little_breakpoint[] = { 0xd, 0x0a, 0, 0 };
+ static gdb_byte little_breakpoint[] = { 0xd, 0, 0x5, 0 };
+ static gdb_byte pmon_little_breakpoint[] = { 0xd, 0, 0, 0 };
+ static gdb_byte idt_little_breakpoint[] = { 0xd, 0x0a, 0, 0 };
*lenptr = sizeof (little_breakpoint);
address from those two instructions. */
CORE_ADDR target_pc = read_signed_register (2);
- t_inst inst;
+ ULONGEST inst;
int i;
/* See if the name of the target function is __fn_stub_*. */
/* Scan through this _fn_stub_ code for the lui/addiu pair.
The limit on the search is arbitrarily set to 20
instructions. FIXME. */
- for (i = 0, pc = 0; i < 20; i++, target_pc += MIPS32_INSN_SIZE)
+ for (i = 0, pc = 0; i < 20; i++, target_pc += MIPS_INSN32_SIZE)
{
inst = mips_fetch_instruction (target_pc);
if ((inst & 0xffff0000) == 0x3c010000) /* lui $at */
return 0; /* not a stub */
}
-
-/* Return non-zero if the PC is inside a call thunk (aka stub or trampoline).
- This implements the IN_SOLIB_CALL_TRAMPOLINE macro. */
-
-static int
-mips_in_call_stub (CORE_ADDR pc, char *name)
-{
- CORE_ADDR start_addr;
-
- /* Find the starting address of the function containing the PC. If the
- caller didn't give us a name, look it up at the same time. */
- if (find_pc_partial_function (pc, name ? NULL : &name, &start_addr, NULL) ==
- 0)
- return 0;
-
- if (strncmp (name, "__mips16_call_stub_", 19) == 0)
- {
- /* If the PC is in __mips16_call_stub_{1..10}, this is a call stub. */
- if (name[19] >= '0' && name[19] <= '9')
- return 1;
- /* If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
- before the jal instruction, this is effectively a call stub. */
- else if (name[19] == 's' || name[19] == 'd')
- return pc == start_addr;
- }
-
- return 0; /* not a stub */
-}
-
-
-/* Return non-zero if the PC is inside a return thunk (aka stub or
- trampoline). */
-
-static int
-mips_in_solib_return_trampoline (CORE_ADDR pc, char *name)
-{
- CORE_ADDR start_addr;
-
- /* Find the starting address of the function containing the PC. */
- if (find_pc_partial_function (pc, NULL, &start_addr, NULL) == 0)
- return 0;
-
- /* If the PC is in __mips16_ret_{d,s}f, this is a return stub. */
- if (strcmp (name, "__mips16_ret_sf") == 0
- || strcmp (name, "__mips16_ret_df") == 0)
- return 1;
-
- /* If the PC is in __mips16_call_stub_{s,d}f_{0..10} but not at the start,
- i.e. after the jal instruction, this is effectively a return stub. */
- if (strncmp (name, "__mips16_call_stub_", 19) == 0
- && (name[19] == 's' || name[19] == 'd') && pc != start_addr)
- return 1;
-
- return 0; /* not a stub */
-}
-
-
-/* Return non-zero if the PC is in a library helper function that
- should be ignored. This implements the
- DEPRECATED_IGNORE_HELPER_CALL macro. */
-
-int
-mips_ignore_helper (CORE_ADDR pc)
-{
- char *name;
-
- /* Find the starting address and name of the function containing the PC. */
- if (find_pc_partial_function (pc, &name, NULL, NULL) == 0)
- return 0;
-
- /* If the PC is in __mips16_ret_{d,s}f, this is a library helper function
- that we want to ignore. */
- return (strcmp (name, "__mips16_ret_sf") == 0
- || strcmp (name, "__mips16_ret_df") == 0);
-}
-
-
/* Convert a dbx stab register number (from `r' declaration) to a GDB
[1 * NUM_REGS .. 2 * NUM_REGS) REGNUM. */
}
-/* Convert an integer into an address. By first converting the value
- into a pointer and then extracting it signed, the address is
- guarenteed to be correctly sign extended. */
+/* Convert an integer into an address. Extracting the value signed
+ guarantees a correctly sign extended address. */
static CORE_ADDR
-mips_integer_to_address (struct type *type, void *buf)
+mips_integer_to_address (struct gdbarch *gdbarch,
+ struct type *type, const gdb_byte *buf)
{
- char *tmp = alloca (TYPE_LENGTH (builtin_type_void_data_ptr));
- LONGEST val = unpack_long (type, buf);
- store_signed_integer (tmp, TYPE_LENGTH (builtin_type_void_data_ptr), val);
- return extract_signed_integer (tmp,
- TYPE_LENGTH (builtin_type_void_data_ptr));
+ return (CORE_ADDR) extract_signed_integer (buf, TYPE_LENGTH (type));
}
static void
else if (strcmp (name, ".mdebug.eabi64") == 0)
*abip = MIPS_ABI_EABI64;
else
- warning ("unsupported ABI %s.", name + 8);
+ warning (_("unsupported ABI %s."), name + 8);
+}
+
+static void
+mips_find_long_section (bfd *abfd, asection *sect, void *obj)
+{
+ int *lbp = (int *) obj;
+ const char *name = bfd_get_section_name (abfd, sect);
+
+ if (strncmp (name, ".gcc_compiled_long32", 20) == 0)
+ *lbp = 32;
+ else if (strncmp (name, ".gcc_compiled_long64", 20) == 0)
+ *lbp = 64;
+ else if (strncmp (name, ".gcc_compiled_long", 18) == 0)
+ warning (_("unrecognized .gcc_compiled_longXX"));
}
static enum mips_abi
if (mips_abi_strings[i] == mips_abi_string)
return (enum mips_abi) i;
- internal_error (__FILE__, __LINE__, "unknown ABI string");
+ internal_error (__FILE__, __LINE__, _("unknown ABI string"));
+}
+
+static void
+mips_register_g_packet_guesses (struct gdbarch *gdbarch)
+{
+ static struct target_desc *tdesc_gp32, *tdesc_gp64;
+
+ if (tdesc_gp32 == NULL)
+ {
+ /* Create feature sets with the appropriate properties. The values
+ are not important. */
+
+ tdesc_gp32 = allocate_target_description ();
+ set_tdesc_property (tdesc_gp32, PROPERTY_GP32, "");
+
+ tdesc_gp64 = allocate_target_description ();
+ set_tdesc_property (tdesc_gp64, PROPERTY_GP64, "");
+ }
+
+ /* If the size matches the set of 32-bit or 64-bit integer registers,
+ assume that's what we've got. */
+ register_remote_g_packet_guess (gdbarch, 38 * 4, tdesc_gp32);
+ register_remote_g_packet_guess (gdbarch, 38 * 8, tdesc_gp64);
+
+ /* If the size matches the full set of registers GDB traditionally
+ knows about, including floating point, for either 32-bit or
+ 64-bit, assume that's what we've got. */
+ register_remote_g_packet_guess (gdbarch, 90 * 4, tdesc_gp32);
+ register_remote_g_packet_guess (gdbarch, 90 * 8, tdesc_gp64);
+
+ /* Otherwise we don't have a useful guess. */
}
static struct gdbarch *
}
}
+ /* Default 64-bit objects to N64 instead of O32. */
+ if (found_abi == MIPS_ABI_UNKNOWN
+ && info.abfd != NULL
+ && bfd_get_flavour (info.abfd) == bfd_target_elf_flavour
+ && elf_elfheader (info.abfd)->e_ident[EI_CLASS] == ELFCLASS64)
+ found_abi = MIPS_ABI_N64;
+
if (gdbarch_debug)
fprintf_unfiltered (gdb_stdlog, "mips_gdbarch_init: found_abi = %d\n",
found_abi);
fprintf_unfiltered (gdb_stdlog,
"mips_gdbarch_init: fpu_type = %d\n", fpu_type);
+ /* Check for blatant incompatibilities. */
+
+ /* If we have only 32-bit registers, then we can't debug a 64-bit
+ ABI. */
+ if (info.target_desc
+ && tdesc_property (info.target_desc, PROPERTY_GP32) != NULL
+ && mips_abi != MIPS_ABI_EABI32
+ && mips_abi != MIPS_ABI_O32)
+ return NULL;
+
/* try to find a pre-existing architecture */
for (arches = gdbarch_list_lookup_by_info (arches, &info);
arches != NULL;
tdep->found_abi = found_abi;
tdep->mips_abi = mips_abi;
tdep->mips_fpu_type = fpu_type;
+ tdep->register_size_valid_p = 0;
+ tdep->register_size = 0;
+
+ if (info.target_desc)
+ {
+ /* Some useful properties can be inferred from the target. */
+ if (tdesc_property (info.target_desc, PROPERTY_GP32) != NULL)
+ {
+ tdep->register_size_valid_p = 1;
+ tdep->register_size = 4;
+ }
+ else if (tdesc_property (info.target_desc, PROPERTY_GP64) != NULL)
+ {
+ tdep->register_size_valid_p = 1;
+ tdep->register_size = 8;
+ }
+ }
/* Initially set everything according to the default ABI/ISA. */
set_gdbarch_short_bit (gdbarch, 16);
set_gdbarch_ptr_bit (gdbarch, 32);
set_gdbarch_long_long_bit (gdbarch, 64);
set_gdbarch_long_double_bit (gdbarch, 128);
- set_gdbarch_long_double_format (gdbarch,
- &floatformat_n32n64_long_double_big);
+ set_gdbarch_long_double_format (gdbarch, floatformats_n32n64_long);
break;
case MIPS_ABI_N64:
set_gdbarch_push_dummy_call (gdbarch, mips_n32n64_push_dummy_call);
set_gdbarch_ptr_bit (gdbarch, 64);
set_gdbarch_long_long_bit (gdbarch, 64);
set_gdbarch_long_double_bit (gdbarch, 128);
- set_gdbarch_long_double_format (gdbarch,
- &floatformat_n32n64_long_double_big);
+ set_gdbarch_long_double_format (gdbarch, floatformats_n32n64_long);
break;
default:
- internal_error (__FILE__, __LINE__, "unknown ABI in switch");
+ internal_error (__FILE__, __LINE__, _("unknown ABI in switch"));
+ }
+
+ /* GCC creates a pseudo-section whose name specifies the size of
+ longs, since -mlong32 or -mlong64 may be used independent of
+ other options. How those options affect pointer sizes is ABI and
+ architecture dependent, so use them to override the default sizes
+ set by the ABI. This table shows the relationship between ABI,
+ -mlongXX, and size of pointers:
+
+ ABI -mlongXX ptr bits
+ --- -------- --------
+ o32 32 32
+ o32 64 32
+ n32 32 32
+ n32 64 64
+ o64 32 32
+ o64 64 64
+ n64 32 32
+ n64 64 64
+ eabi32 32 32
+ eabi32 64 32
+ eabi64 32 32
+ eabi64 64 64
+
+ Note that for o32 and eabi32, pointers are always 32 bits
+ regardless of any -mlongXX option. For all others, pointers and
+ longs are the same, as set by -mlongXX or set by defaults.
+ */
+
+ if (info.abfd != NULL)
+ {
+ int long_bit = 0;
+
+ bfd_map_over_sections (info.abfd, mips_find_long_section, &long_bit);
+ if (long_bit)
+ {
+ set_gdbarch_long_bit (gdbarch, long_bit);
+ switch (mips_abi)
+ {
+ case MIPS_ABI_O32:
+ case MIPS_ABI_EABI32:
+ break;
+ case MIPS_ABI_N32:
+ case MIPS_ABI_O64:
+ case MIPS_ABI_N64:
+ case MIPS_ABI_EABI64:
+ set_gdbarch_ptr_bit (gdbarch, long_bit);
+ break;
+ default:
+ internal_error (__FILE__, __LINE__, _("unknown ABI in switch"));
+ }
+ }
}
/* FIXME: jlarmour/2000-04-07: There *is* a flag EF_MIPS_32BIT_MODE
set_gdbarch_skip_trampoline_code (gdbarch, mips_skip_trampoline_code);
- /* NOTE drow/2004-02-11: We overload the core solib trampoline code
- to support MIPS16. This is a bad thing. Make sure not to do it
- if we have an OS ABI that actually supports shared libraries, since
- shared library support is more important. If we have an OS someday
- that supports both shared libraries and MIPS16, we'll have to find
- a better place for these. */
- if (info.osabi == GDB_OSABI_UNKNOWN)
- {
- set_gdbarch_in_solib_call_trampoline (gdbarch, mips_in_call_stub);
- set_gdbarch_in_solib_return_trampoline (gdbarch, mips_in_solib_return_trampoline);
- }
+ set_gdbarch_single_step_through_delay (gdbarch, mips_single_step_through_delay);
+
+ /* Virtual tables. */
+ set_gdbarch_vbit_in_delta (gdbarch, 1);
+
+ mips_register_g_packet_guesses (gdbarch);
/* Hook in OS ABI-specific overrides, if they have been registered. */
gdbarch_init_osabi (info, gdbarch);
/* Unwind the frame. */
frame_unwind_append_sniffer (gdbarch, mips_stub_frame_sniffer);
- frame_unwind_append_sniffer (gdbarch, mips_mdebug_frame_sniffer);
frame_unwind_append_sniffer (gdbarch, mips_insn16_frame_sniffer);
frame_unwind_append_sniffer (gdbarch, mips_insn32_frame_sniffer);
frame_base_append_sniffer (gdbarch, mips_stub_frame_base_sniffer);
- frame_base_append_sniffer (gdbarch, mips_mdebug_frame_base_sniffer);
frame_base_append_sniffer (gdbarch, mips_insn16_frame_base_sniffer);
frame_base_append_sniffer (gdbarch, mips_insn32_frame_base_sniffer);
/* Print out which MIPS ABI is in use. */
static void
-show_mips_abi (char *ignore_args, int from_tty)
+show_mips_abi (struct ui_file *file,
+ int from_tty,
+ struct cmd_list_element *ignored_cmd,
+ const char *ignored_value)
{
if (gdbarch_bfd_arch_info (current_gdbarch)->arch != bfd_arch_mips)
- printf_filtered
- ("The MIPS ABI is unknown because the current architecture is not MIPS.\n");
+ fprintf_filtered
+ (file,
+ "The MIPS ABI is unknown because the current architecture "
+ "is not MIPS.\n");
else
{
enum mips_abi global_abi = global_mips_abi ();
const char *actual_abi_str = mips_abi_strings[actual_abi];
if (global_abi == MIPS_ABI_UNKNOWN)
- printf_filtered
- ("The MIPS ABI is set automatically (currently \"%s\").\n",
+ fprintf_filtered
+ (file,
+ "The MIPS ABI is set automatically (currently \"%s\").\n",
actual_abi_str);
else if (global_abi == actual_abi)
- printf_filtered
- ("The MIPS ABI is assumed to be \"%s\" (due to user setting).\n",
+ fprintf_filtered
+ (file,
+ "The MIPS ABI is assumed to be \"%s\" (due to user setting).\n",
actual_abi_str);
else
{
/* Probably shouldn't happen... */
- printf_filtered
- ("The (auto detected) MIPS ABI \"%s\" is in use even though the user setting was \"%s\".\n",
+ fprintf_filtered
+ (file,
+ "The (auto detected) MIPS ABI \"%s\" is in use even though the user setting was \"%s\".\n",
actual_abi_str, mips_abi_strings[global_abi]);
}
}
{
int ef_mips_arch;
int ef_mips_32bitmode;
- /* determine the ISA */
+ /* Determine the ISA. */
switch (tdep->elf_flags & EF_MIPS_ARCH)
{
case E_MIPS_ARCH_1:
ef_mips_arch = 0;
break;
}
- /* determine the size of a pointer */
+ /* Determine the size of a pointer. */
ef_mips_32bitmode = (tdep->elf_flags & EF_MIPS_32BITMODE);
fprintf_unfiltered (file,
"mips_dump_tdep: tdep->elf_flags = 0x%x\n",
fprintf_unfiltered (file,
"mips_dump_tdep: mips_stack_argsize() = %d\n",
mips_stack_argsize (current_gdbarch));
- fprintf_unfiltered (file,
- "mips_dump_tdep: ADDR_BITS_REMOVE # %s\n",
- XSTRING (ADDR_BITS_REMOVE (ADDR)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: ATTACH_DETACH # %s\n",
- XSTRING (ATTACH_DETACH));
- fprintf_unfiltered (file,
- "mips_dump_tdep: DWARF_REG_TO_REGNUM # %s\n",
- XSTRING (DWARF_REG_TO_REGNUM (REGNUM)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: ECOFF_REG_TO_REGNUM # %s\n",
- XSTRING (ECOFF_REG_TO_REGNUM (REGNUM)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: FIRST_EMBED_REGNUM = %d\n",
- FIRST_EMBED_REGNUM);
- fprintf_unfiltered (file,
- "mips_dump_tdep: DEPRECATED_IGNORE_HELPER_CALL # %s\n",
- XSTRING (DEPRECATED_IGNORE_HELPER_CALL (PC)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: IN_SOLIB_CALL_TRAMPOLINE # %s\n",
- XSTRING (IN_SOLIB_CALL_TRAMPOLINE (PC, NAME)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: LAST_EMBED_REGNUM = %d\n",
- LAST_EMBED_REGNUM);
-#ifdef MACHINE_CPROC_FP_OFFSET
- fprintf_unfiltered (file,
- "mips_dump_tdep: MACHINE_CPROC_FP_OFFSET = %d\n",
- MACHINE_CPROC_FP_OFFSET);
-#endif
-#ifdef MACHINE_CPROC_PC_OFFSET
- fprintf_unfiltered (file,
- "mips_dump_tdep: MACHINE_CPROC_PC_OFFSET = %d\n",
- MACHINE_CPROC_PC_OFFSET);
-#endif
-#ifdef MACHINE_CPROC_SP_OFFSET
- fprintf_unfiltered (file,
- "mips_dump_tdep: MACHINE_CPROC_SP_OFFSET = %d\n",
- MACHINE_CPROC_SP_OFFSET);
-#endif
- fprintf_unfiltered (file, "mips_dump_tdep: MIPS_DEFAULT_ABI = FIXME!\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_EFI_SYMBOL_NAME = multi-arch!!\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_LAST_ARG_REGNUM = %d (%d regs)\n",
- MIPS_LAST_ARG_REGNUM,
- MIPS_LAST_ARG_REGNUM - MIPS_A0_REGNUM + 1);
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_NUMREGS = %d\n", MIPS_NUMREGS);
- fprintf_unfiltered (file,
- "mips_dump_tdep: mips_abi_regsize() = %d\n",
- mips_abi_regsize (current_gdbarch));
- fprintf_unfiltered (file,
- "mips_dump_tdep: PRID_REGNUM = %d\n", PRID_REGNUM);
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_FRAME_ADJUST = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_FRAME_OFFSET = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_FRAME_REG = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_FREG_MASK = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_FREG_OFFSET = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_HIGH_ADDR = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_LOW_ADDR = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_PC_REG = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_REG_MASK = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_REG_OFFSET = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_SYMBOL = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PS_REGNUM = %d\n", PS_REGNUM);
-#ifdef SAVED_BYTES
- fprintf_unfiltered (file,
- "mips_dump_tdep: SAVED_BYTES = %d\n", SAVED_BYTES);
-#endif
-#ifdef SAVED_FP
- fprintf_unfiltered (file, "mips_dump_tdep: SAVED_FP = %d\n", SAVED_FP);
-#endif
-#ifdef SAVED_PC
- fprintf_unfiltered (file, "mips_dump_tdep: SAVED_PC = %d\n", SAVED_PC);
-#endif
- fprintf_unfiltered (file,
- "mips_dump_tdep: SETUP_ARBITRARY_FRAME # %s\n",
- XSTRING (SETUP_ARBITRARY_FRAME (NUMARGS, ARGS)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: SOFTWARE_SINGLE_STEP # %s\n",
- XSTRING (SOFTWARE_SINGLE_STEP (SIG, BP_P)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: SOFTWARE_SINGLE_STEP_P () = %d\n",
- SOFTWARE_SINGLE_STEP_P ());
- fprintf_unfiltered (file,
- "mips_dump_tdep: STAB_REG_TO_REGNUM # %s\n",
- XSTRING (STAB_REG_TO_REGNUM (REGNUM)));
-#ifdef STACK_END_ADDR
- fprintf_unfiltered (file,
- "mips_dump_tdep: STACK_END_ADDR = %d\n",
- STACK_END_ADDR);
-#endif
- fprintf_unfiltered (file,
- "mips_dump_tdep: STEP_SKIPS_DELAY # %s\n",
- XSTRING (STEP_SKIPS_DELAY (PC)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: STEP_SKIPS_DELAY_P = %d\n",
- STEP_SKIPS_DELAY_P);
- fprintf_unfiltered (file,
- "mips_dump_tdep: STOPPED_BY_WATCHPOINT # %s\n",
- XSTRING (STOPPED_BY_WATCHPOINT (WS)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: TABULAR_REGISTER_OUTPUT = used?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: TARGET_CAN_USE_HARDWARE_WATCHPOINT # %s\n",
- XSTRING (TARGET_CAN_USE_HARDWARE_WATCHPOINT
- (TYPE, CNT, OTHERTYPE)));
-#ifdef TRACE_CLEAR
- fprintf_unfiltered (file,
- "mips_dump_tdep: TRACE_CLEAR # %s\n",
- XSTRING (TRACE_CLEAR (THREAD, STATE)));
-#endif
-#ifdef TRACE_FLAVOR
- fprintf_unfiltered (file,
- "mips_dump_tdep: TRACE_FLAVOR = %d\n", TRACE_FLAVOR);
-#endif
-#ifdef TRACE_FLAVOR_SIZE
- fprintf_unfiltered (file,
- "mips_dump_tdep: TRACE_FLAVOR_SIZE = %d\n",
- TRACE_FLAVOR_SIZE);
-#endif
-#ifdef TRACE_SET
- fprintf_unfiltered (file,
- "mips_dump_tdep: TRACE_SET # %s\n",
- XSTRING (TRACE_SET (X, STATE)));
-#endif
-#ifdef UNUSED_REGNUM
- fprintf_unfiltered (file,
- "mips_dump_tdep: UNUSED_REGNUM = %d\n", UNUSED_REGNUM);
-#endif
- fprintf_unfiltered (file,
- "mips_dump_tdep: VM_MIN_ADDRESS = %ld\n",
- (long) VM_MIN_ADDRESS);
}
extern initialize_file_ftype _initialize_mips_tdep; /* -Wmissing-prototypes */
mips_abi_string = mips_abi_strings[MIPS_ABI_UNKNOWN];
if (MIPS_ABI_LAST + 1
!= sizeof (mips_abi_strings) / sizeof (mips_abi_strings[0]))
- internal_error (__FILE__, __LINE__, "mips_abi_strings out of sync");
+ internal_error (__FILE__, __LINE__, _("mips_abi_strings out of sync"));
gdbarch_register (bfd_arch_mips, mips_gdbarch_init, mips_dump_tdep);
/* Add root prefix command for all "set mips"/"show mips" commands */
add_prefix_cmd ("mips", no_class, set_mips_command,
- "Various MIPS specific commands.",
+ _("Various MIPS specific commands."),
&setmipscmdlist, "set mips ", 0, &setlist);
add_prefix_cmd ("mips", no_class, show_mips_command,
- "Various MIPS specific commands.",
+ _("Various MIPS specific commands."),
&showmipscmdlist, "show mips ", 0, &showlist);
/* Allow the user to override the saved register size. */
add_setshow_enum_cmd ("saved-gpreg-size", class_obscure,
- size_enums, &mips_abi_regsize_string, "\
-Set size of general purpose registers saved on the stack.\n", "\
-Show size of general purpose registers saved on the stack.\n", "\
+ size_enums, &mips_abi_regsize_string, _("\
+Set size of general purpose registers saved on the stack."), _("\
+Show size of general purpose registers saved on the stack."), _("\
This option can be set to one of:\n\
32 - Force GDB to treat saved GP registers as 32-bit\n\
64 - Force GDB to treat saved GP registers as 64-bit\n\
auto - Allow GDB to use the target's default setting or autodetect the\n\
- saved GP register size from information contained in the executable.\n\
- (default: auto)", "\
-Size of general purpose registers saved on the stack is %s.\n",
- NULL, NULL, &setmipscmdlist, &showmipscmdlist);
+ saved GP register size from information contained in the\n\
+ executable (default)."),
+ NULL,
+ NULL, /* FIXME: i18n: Size of general purpose registers saved on the stack is %s. */
+ &setmipscmdlist, &showmipscmdlist);
/* Allow the user to override the argument stack size. */
add_setshow_enum_cmd ("stack-arg-size", class_obscure,
- size_enums, &mips_stack_argsize_string, "\
-Set the amount of stack space reserved for each argument.\n", "\
-Show the amount of stack space reserved for each argument.\n", "\
+ size_enums, &mips_stack_argsize_string, _("\
+Set the amount of stack space reserved for each argument."), _("\
+Show the amount of stack space reserved for each argument."), _("\
This option can be set to one of:\n\
32 - Force GDB to allocate 32-bit chunks per argument\n\
64 - Force GDB to allocate 64-bit chunks per argument\n\
auto - Allow GDB to determine the correct setting from the current\n\
- target and executable (default)", "\
-The amount of stack space reserved for each argument is %s.\n",
- NULL, NULL, &setmipscmdlist, &showmipscmdlist);
+ target and executable (default)"),
+ NULL,
+ NULL, /* FIXME: i18n: The amount of stack space reserved for each argument is %s. */
+ &setmipscmdlist, &showmipscmdlist);
/* Allow the user to override the ABI. */
- c = add_set_enum_cmd
- ("abi", class_obscure, mips_abi_strings, &mips_abi_string,
- "Set the ABI used by this program.\n"
- "This option can be set to one of:\n"
- " auto - the default ABI associated with the current binary\n"
- " o32\n"
- " o64\n" " n32\n" " n64\n" " eabi32\n" " eabi64", &setmipscmdlist);
- set_cmd_sfunc (c, mips_abi_update);
- add_cmd ("abi", class_obscure, show_mips_abi,
- "Show ABI in use by MIPS target", &showmipscmdlist);
+ add_setshow_enum_cmd ("abi", class_obscure, mips_abi_strings,
+ &mips_abi_string, _("\
+Set the MIPS ABI used by this program."), _("\
+Show the MIPS ABI used by this program."), _("\
+This option can be set to one of:\n\
+ auto - the default ABI associated with the current binary\n\
+ o32\n\
+ o64\n\
+ n32\n\
+ n64\n\
+ eabi32\n\
+ eabi64"),
+ mips_abi_update,
+ show_mips_abi,
+ &setmipscmdlist, &showmipscmdlist);
/* Let the user turn off floating point and set the fence post for
heuristic_proc_start. */
add_prefix_cmd ("mipsfpu", class_support, set_mipsfpu_command,
- "Set use of MIPS floating-point coprocessor.",
+ _("Set use of MIPS floating-point coprocessor."),
&mipsfpulist, "set mipsfpu ", 0, &setlist);
add_cmd ("single", class_support, set_mipsfpu_single_command,
- "Select single-precision MIPS floating-point coprocessor.",
+ _("Select single-precision MIPS floating-point coprocessor."),
&mipsfpulist);
add_cmd ("double", class_support, set_mipsfpu_double_command,
- "Select double-precision MIPS floating-point coprocessor.",
+ _("Select double-precision MIPS floating-point coprocessor."),
&mipsfpulist);
add_alias_cmd ("on", "double", class_support, 1, &mipsfpulist);
add_alias_cmd ("yes", "double", class_support, 1, &mipsfpulist);
add_alias_cmd ("1", "double", class_support, 1, &mipsfpulist);
add_cmd ("none", class_support, set_mipsfpu_none_command,
- "Select no MIPS floating-point coprocessor.", &mipsfpulist);
+ _("Select no MIPS floating-point coprocessor."), &mipsfpulist);
add_alias_cmd ("off", "none", class_support, 1, &mipsfpulist);
add_alias_cmd ("no", "none", class_support, 1, &mipsfpulist);
add_alias_cmd ("0", "none", class_support, 1, &mipsfpulist);
add_cmd ("auto", class_support, set_mipsfpu_auto_command,
- "Select MIPS floating-point coprocessor automatically.",
+ _("Select MIPS floating-point coprocessor automatically."),
&mipsfpulist);
add_cmd ("mipsfpu", class_support, show_mipsfpu_command,
- "Show current use of MIPS floating-point coprocessor target.",
+ _("Show current use of MIPS floating-point coprocessor target."),
&showlist);
/* We really would like to have both "0" and "unlimited" work, but
command.c doesn't deal with that. So make it a var_zinteger
because the user can always use "999999" or some such for unlimited. */
add_setshow_zinteger_cmd ("heuristic-fence-post", class_support,
- &heuristic_fence_post, "\
-Set the distance searched for the start of a function.\n", "\
-Show the distance searched for the start of a function.\n", "\
+ &heuristic_fence_post, _("\
+Set the distance searched for the start of a function."), _("\
+Show the distance searched for the start of a function."), _("\
If you are debugging a stripped executable, GDB needs to search through the\n\
program for the start of a function. This command sets the distance of the\n\
-search. The only need to set it is when debugging a stripped executable.", "\
-The distance searched for the start of a function is %s.\n",
- reinit_frame_cache_sfunc, NULL,
+search. The only need to set it is when debugging a stripped executable."),
+ reinit_frame_cache_sfunc,
+ NULL, /* FIXME: i18n: The distance searched for the start of a function is %s. */
&setlist, &showlist);
/* Allow the user to control whether the upper bits of 64-bit
addresses should be zeroed. */
- add_setshow_auto_boolean_cmd ("mask-address", no_class, &mask_address_var, "\
-Set zeroing of upper 32 bits of 64-bit addresses.", "\
-Show zeroing of upper 32 bits of 64-bit addresses.", "\
+ add_setshow_auto_boolean_cmd ("mask-address", no_class,
+ &mask_address_var, _("\
+Set zeroing of upper 32 bits of 64-bit addresses."), _("\
+Show zeroing of upper 32 bits of 64-bit addresses."), _("\
Use \"on\" to enable the masking, \"off\" to disable it and \"auto\" to \n\
-allow GDB to determine the correct value.\n", "\
-Zerroing of upper 32 bits of 64-bit address is %s.",
- NULL, show_mask_address, &setmipscmdlist, &showmipscmdlist);
+allow GDB to determine the correct value."),
+ NULL, show_mask_address,
+ &setmipscmdlist, &showmipscmdlist);
/* Allow the user to control the size of 32 bit registers within the
raw remote packet. */
add_setshow_boolean_cmd ("remote-mips64-transfers-32bit-regs", class_obscure,
- &mips64_transfers_32bit_regs_p, "\
-Set compatibility with 64-bit MIPS target that transfers 32-bit quantities.", "\
-Show compatibility with 64-bit MIPS target that transfers 32-bit quantities.", "\
+ &mips64_transfers_32bit_regs_p, _("\
+Set compatibility with 64-bit MIPS target that transfers 32-bit quantities."),
+ _("\
+Show compatibility with 64-bit MIPS target that transfers 32-bit quantities."),
+ _("\
Use \"on\" to enable backward compatibility with older MIPS 64 GDB+target\n\
that would transfer 32 bits for some registers (e.g. SR, FSR) and\n\
-64 bits for others. Use \"off\" to disable compatibility mode", "\
-Compatibility with 64-bit MIPS target that transfers 32-bit quantities is %s.",
- set_mips64_transfers_32bit_regs, NULL, &setlist, &showlist);
+64 bits for others. Use \"off\" to disable compatibility mode"),
+ set_mips64_transfers_32bit_regs,
+ NULL, /* FIXME: i18n: Compatibility with 64-bit MIPS target that transfers 32-bit quantities is %s. */
+ &setlist, &showlist);
/* Debug this files internals. */
add_setshow_zinteger_cmd ("mips", class_maintenance,
- &mips_debug, "\
-Set mips debugging.\n", "\
-Show mips debugging.\n", "\
-When non-zero, mips specific debugging is enabled.\n", "\
-Mips debugging is currently %s.\n",
- NULL, NULL,
+ &mips_debug, _("\
+Set mips debugging."), _("\
+Show mips debugging."), _("\
+When non-zero, mips specific debugging is enabled."),
+ NULL,
+ NULL, /* FIXME: i18n: Mips debugging is currently %s. */
&setdebuglist, &showdebuglist);
}
projects / deliverable / binutils-gdb.git / blobdiff